05: PCI 300.0: 0200 Ethernet controller [Created at pci.386] Unique ID: UOJ9.Bfm+4klc7ZA Parent ID: 6NW+.qO2MJbR0aOF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "D-Link DFE-530TX+ 10/100 Ethernet Adapter" Vendor: pci 0x1186 "D-Link System Inc" Device: pci 0x1300 "RTL8139 Ethernet" SubVendor: pci 0x1186 "D-Link System Inc" SubDevice: pci 0x1301 "DFE-530TX+ 10/100 Ethernet Adapter" Revision: 0x10 Driver: "8139too" Driver Modules: "8139too" Device File: enp3s0 I/O Ports: 0xdc00-0xdcff (rw) Memory Range: 0xfe6fff00-0xfe6fffff (rw,non-prefetchable) IRQ: 16 (168395 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Module Alias: "pci:v00001186d00001300sv00001186sd00001301bc02sc00i00" Driver Info #0: Driver Status: 8139too is active Driver Activation Cmd: "modprobe 8139too" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 06: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2922 "82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 Revision: 0x02 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xfe00-0xfe07 (rw) I/O Ports: 0xfe10-0xfe13 (rw) I/O Ports: 0xfe20-0xfe27 (rw) I/O Ports: 0xfe30-0xfe33 (rw) I/O Ports: 0xfec0-0xfedf (rw) Memory Range: 0xf0200000-0xf02007ff (rw,non-prefetchable) IRQ: 25 (14957 events) Module Alias: "pci:v00008086d00002922sv00001028sd00000211bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.YAZVHxsLYW6 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2940 "82801I (ICH9 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "pcieport" IRQ: 16 (168395 events) Module Alias: "pci:v00008086d00002940sv00001028sd00000211bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.+YuHmkn8HV5 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff00-0xff1f (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d00002938sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.MrS3qDdB2QB SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801IO (ICH9DO) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2914 "82801IO (ICH9DO) LPC Interface Controller" Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002914sv00000000sd00000000bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.p_D9a9Gh3ZD SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b1 "82Q35 Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "pcieport" IRQ: 16 (168395 events) Module Alias: "pci:v00008086d000029B1sv00001028sd00000211bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.SJ32K55phm5 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff60-0xff7f (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d00002935sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.kY6yMez4kU2 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b3 "82Q35 Express Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Memory Range: 0xfea80000-0xfeafffff (rw,non-prefetchable) Module Alias: "pci:v00008086d000029B3sv00001028sd00000211bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.z97TXzKOvE6 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9dc000-0xfe9dffff (rw,non-prefetchable) IRQ: 26 (646 events) Module Alias: "pci:v00008086d0000293Esv00001028sd00000211bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 19.0: 0200 Ethernet controller [Created at pci.386] Unique ID: ID95.sY8Bmu4PSKD SysFS ID: /devices/pci0000:00/0000:00:19.0 SysFS BusID: 0000:00:19.0 Hardware Class: network Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x10bd "82566DM-2 Gigabit Network Connection" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 Memory Range: 0xfe9e0000-0xfe9fffff (rw,non-prefetchable) Memory Range: 0xfe9db000-0xfe9dbfff (rw,non-prefetchable) I/O Ports: 0xecc0-0xecdf (rw) IRQ: 24 (1227 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Module Alias: "pci:v00008086d000010BDsv00001028sd00000211bc02sc00i00" Driver Info #0: Driver Status: e1000e is active Driver Activation Cmd: "modprobe e1000e" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.qO2MJbR0aOF SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x92 Module Alias: "pci:v00008086d0000244Esv00001028sd00000211bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.vfDjRoVOT52 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2930 "82801I (ICH9 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Memory Range: 0xfe9d9b00-0xfe9d9bff (rw,non-prefetchable) I/O Ports: 0xece0-0xecff (rw) IRQ: 9 (3 events) Module Alias: "pci:v00008086d00002930sv00001028sd00000211bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is not active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.EkWZ2U7mjh0 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b0 "82Q35 Express DRAM Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Module Alias: "pci:v00008086d000029B0sv00001028sd00000211bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.zj+nofCWD96 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff40-0xff5f (rw) IRQ: 18 (510 events) Module Alias: "pci:v00008086d00002936sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.U8yXHAgRl65 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff20-0xff3f (rw) IRQ: 16 (168395 events) Module Alias: "pci:v00008086d00002937sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.xu6IrWz5AO5 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff80-0xff9f (rw) IRQ: 23 (2 events) Module Alias: "pci:v00008086d00002934sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.ZDGTz4ljvsB SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfe9d9c00-0xfe9d9fff (rw,non-prefetchable) IRQ: 22 (10614 events) Module Alias: "pci:v00008086d0000293Csv00001028sd00000211bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.D6lJTogQStC SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b2 "Q35" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea00000-0xfea7ffff (rw,non-prefetchable) I/O Ports: 0xec90-0xec97 (rw) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (168395 events) Module Alias: "pci:v00008086d000029B2sv00001028sd00000211bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.XONz+xVJs5B SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xff980800-0xff980bff (rw,non-prefetchable) IRQ: 23 (2 events) Module Alias: "pci:v00008086d0000293Asv00001028sd00000211bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.Z7OFAwVLW66 Parent ID: _Znp.D6lJTogQStC Hardware Class: monitor Model: "JT229x6" Vendor: JEN Device: eisa 0x10c6 "JT229x6" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1680x1050@60Hz Size: 474x297 mm Year of Manufacture: 2007 Week of Manufacture: 12 Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) -vsync Frequencies: 146.25 MHz, 65.29 kHz, 59.95 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 50-76 Hz Hor. Sync Range: 30-83 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (VGA compatible controller) 25: SCSI 600.0: 10600 Disk [Created at block.245] Unique ID: Uc5H.QlYxm1NMMG8 Parent ID: sClz.ZDGTz4ljvsB SysFS ID: /class/block/sdb SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "JetFlash Transcend 8GB" Vendor: usb 0x8564 "JetFlash" Device: usb 0x1000 "Transcend 8GB" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-id/usb-JetFlash_Transcend_8GB_...-0:0, /dev/disk/by-path/pci-0000:00:1a.7-usb-0:4:1.0-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:2) Speed: 480 Mbps Module Alias: "usb:v8564p1000d1075dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 26: SCSI 100.0: 10600 Disk [Created at block.245] Unique ID: KD9E.Qiw8i_1rIW9 Parent ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /class/block/sr0 SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: disk Model: "TEAC DVD-ROM DV28SV" Vendor: "TEAC" Device: "DVD-ROM DV28SV" Revision: "R.0A" Driver: "ahci", "sr" Driver Modules: "ahci" Device File: /dev/sr0 (/dev/sg1) Device Files: /dev/sr0, /dev/cdrom, /dev/disk/by-id/ata-TEAC_DVD-ROM_..., /dev/disk/by-label/Ubuntu\x2018.04.3\x20LTS\x20amd64, /dev/disk/by-path/pci-0000:00:1f.2-ata-2, /dev/disk/by-uuid/2019-08-05-19-29-01-00, /dev/dvd Device Number: block 11:0 (char 21:1) Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (SATA controller) 27: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.t9gyWdNXrd1 Parent ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WDC WD800JD-75MS" Vendor: "WDC" Device: "WD800JD-75MS" Revision: "1E04" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-WDC_WD800JD-75MSA3_...-WMAM9DZH3902, /dev/disk/by-path/pci-0000:00:1f.2-ata-1 Device Number: block 8:0-8:15 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (SATA controller) 28: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.SJ32K55phm5 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 29: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.U8yXHAgRl65 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.zj+nofCWD96 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.+YuHmkn8HV5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (USB Controller) 32: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: datd.CpYsQ9Gi5XB Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0 SysFS BusID: 7-1:1.0 Hardware Class: keyboard Model: "Dell USB Entry Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2107 "Dell USB Entry Keyboard" Revision: "1.15" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-id/usb-Dell_Dell_USB_Entry_...-event-kbd, /dev/input/by-path/pci-0000:00:1d.2-usb-0:1:1.0-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2107d0115dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (Hub) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.ZDGTz4ljvsB SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 35: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: mZxt.wcOF6I1xUK7 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: mouse Model: "Logitech M105 Optical Mouse" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc077 "M105 Optical Mouse" Revision: "72.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v046DpC077d7200dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.xu6IrWz5AO5 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.XONz+xVJs5B SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.00" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0500dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 38: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 2325 MHz BogoMips: 4654.89 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 39: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 2325 MHz BogoMips: 4654.89 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 4Iz5.ndpeucax6V1 Parent ID: ID95.sY8Bmu4PSKD SysFS ID: /class/net/enp0s25 SysFS Device Link: /devices/pci0000:00/0000:00:19.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (Ethernet controller) 41: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 42: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 92a1.ndpeucax6V1 Parent ID: UOJ9.Bfm+4klc7ZA SysFS ID: /class/net/enp3s0 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "8139too" Driver Modules: "8139too" Device File: enp3s0 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (Ethernet controller)