Probe #4a79911a5b of ASUSTek M4A78 PRO Desktop Computer

Log: hwinfo

11: PCI 18.3: 0600 Host bridge [Created at pci.386] Unique ID: Fhhh.M7aE7ttHy94 SysFS ID: /devices/pci0000:00/0000:00:18.3 SysFS BusID: 0000:00:18.3 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control" Driver: "k8temp" Driver Modules: "k8temp" Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: k8temp is active Driver Activation Cmd: "modprobe k8temp" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 13.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 06bT.gAy3xuqLgRE SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ehci-pci" Memory Range: 0xfbbff400-0xfbbff4ff (rw,non-prefetchable) IRQ: 19 (168 events) Module Alias: "pci:v00001002d00004396sv00001043sd000082EFbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 18.1: 0600 Host bridge [Created at pci.386] Unique ID: W1j0.KIhk9ketuO3 SysFS ID: /devices/pci0000:00/0000:00:18.1 SysFS BusID: 0000:00:18.1 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] Address Map" Vendor: pci 0x1022 "AMD" Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map" Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.Wqvrn1KKmEC Parent ID: H0_h.2WFy4tpxqR1 SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet" Vendor: pci 0x1969 "Qualcomm Atheros" Device: pci 0x1026 "AR8121/AR8113/AR8114 Gigabit or Fast Ethernet" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x831c Revision: 0xb0 Driver: "ATL1E" Driver Modules: "atl1e" Device File: enp2s0 Memory Range: 0xfbec0000-0xfbefffff (rw,non-prefetchable) I/O Ports: 0xdc00-0xdc7f (rw) IRQ: 18 (735646 events) HW Address: 0B9DDAEB7D23EAC46E26EE6333FD07F4 Permanent HW Address: 0B9DDAEB7D23EAC46E26EE6333FD07F4 Link detected: yes Module Alias: "pci:v00001969d00001026sv00001043sd0000831Cbc02sc00i00" Driver Info #0: Driver Status: atl1e is active Driver Activation Cmd: "modprobe atl1e" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) 15: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.VFExU1K87o8 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "ASUSTeK AMD RS780/RS880 PCI to PCI bridge (int gfx)" Vendor: pci 0x1043 "ASUSTeK Computer Inc." Device: pci 0x9602 "AMD RS780/RS880 PCI to PCI bridge (int gfx)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Module Alias: "pci:v00001043d00009602sv00001043sd000082F1bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 14.5: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: hB6S.zP_DE2gXd08 SysFS ID: /devices/pci0000:00/0000:00:14.5 SysFS BusID: 0000:00:14.5 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4399 "SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ohci-pci" Memory Range: 0xfbbfa000-0xfbbfafff (rw,non-prefetchable) IRQ: 18 (735646 events) Module Alias: "pci:v00001002d00004399sv00001043sd000082EFbc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 306.0: 0104 RAID bus controller [Created at pci.386] Unique ID: Kaa7.n04okMm+yg5 Parent ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:03:06.0 SysFS BusID: 0000:03:06.0 Hardware Class: storage Model: "Winic W-680 (Silicon Image 680 based)" Vendor: pci 0x1095 "Silicon Image, Inc." Device: pci 0x0680 "PCI0680 Ultra ATA-133 Host Controller" SubVendor: pci 0x1095 "Silicon Image, Inc." SubDevice: pci 0x3680 "Winic W-680 (Silicon Image 680 based)" Revision: 0x02 Driver: "pata_sil680" Driver Modules: "pata_sil680" I/O Ports: 0xec00-0xec07 (rw) I/O Ports: 0xe880-0xe883 (rw) I/O Ports: 0xe800-0xe807 (rw) I/O Ports: 0xe480-0xe483 (rw) I/O Ports: 0xe400-0xe40f (rw) Memory Range: 0xfbfffc00-0xfbfffcff (rw,non-prefetchable) Memory Range: 0xfbf00000-0xfbf7ffff (ro,non-prefetchable,disabled) IRQ: 21 (no events) Module Alias: "pci:v00001095d00000680sv00001095sd00003680bc01sc04i00" Driver Info #0: Driver Status: pata_sil680 is active Driver Activation Cmd: "modprobe pata_sil680" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (PCI bridge) 18: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: HSco.xa5kGvQ7aF7 SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ohci-pci" Memory Range: 0xfbbfb000-0xfbbfbfff (rw,non-prefetchable) IRQ: 18 (735646 events) Module Alias: "pci:v00001002d00004397sv00001043sd000082EFbc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 105.1: 0403 Audio device [Created at pci.386] Unique ID: l4dC.eYFlKjfSwt4 Parent ID: vSkL.VFExU1K87o8 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.1 SysFS BusID: 0000:01:05.1 Hardware Class: sound Model: "ATI RS780 HDMI Audio [Radeon 3000/3100 / HD 3200/3300]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x960f "RS780 HDMI Audio [Radeon 3000/3100 / HD 3200/3300]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfbdfc000-0xfbdfffff (rw,non-prefetchable) IRQ: 19 (168 events) Module Alias: "pci:v00001002d0000960Fsv00001043sd000082F1bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 20: PCI 14.3: 0601 ISA bridge [Created at pci.386] Unique ID: yX7n.fklDPZ89nS3 SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB7x0/SB8x0/SB9x0 LPC host controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439d "SB7x0/SB8x0/SB9x0 LPC host controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Module Alias: "pci:v00001002d0000439Dsv00001043sd000082EFbc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 14.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: Eu86.Dp1J4ddEbd0 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 IDE Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439c "SB7x0/SB8x0/SB9x0 IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (63104 events) Module Alias: "pci:v00001002d0000439Csv00001043sd000082EFbc01sc01i8A" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 12.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: x_X+.gAy3xuqLgRE SysFS ID: /devices/pci0000:00/0000:00:12.2 SysFS BusID: 0000:00:12.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ehci-pci" Memory Range: 0xfbbff800-0xfbbff8ff (rw,non-prefetchable) IRQ: 17 (32 events) Module Alias: "pci:v00001002d00004396sv00001043sd000082EFbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.uAqc9L5Vsf2 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "AMD RS780 Host Bridge" Vendor: pci 0x1022 "AMD" Device: pci 0x9600 "RS780 Host Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 "M3A78-EH Motherboard" Module Alias: "pci:v00001022d00009600sv00001043sd000082F1bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 12.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: CLZK.xa5kGvQ7aF7 SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ohci-pci" Memory Range: 0xfbbfd000-0xfbbfdfff (rw,non-prefetchable) IRQ: 16 (63104 events) Module Alias: "pci:v00001002d00004397sv00001043sd000082EFbc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 18.2: 0600 Host bridge [Created at pci.386] Unique ID: OMCs.ridUeImaQn3 SysFS ID: /devices/pci0000:00/0000:00:18.2 SysFS BusID: 0000:00:18.2 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] DRAM Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller" Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 06.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: H0_h.2WFy4tpxqR1 SysFS ID: /devices/pci0000:00/0000:00:06.0 SysFS BusID: 0000:00:06.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (PCIE port 2)" Vendor: pci 0x1022 "AMD" Device: pci 0x9606 "RS780 PCI to PCI bridge (PCIE port 2)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00001022d00009606sv00001043sd000082F1bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 9n5e.S+1UlTYq5e7 SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ohci-pci" Memory Range: 0xfbbfc000-0xfbbfcfff (rw,non-prefetchable) IRQ: 18 (735646 events) Module Alias: "pci:v00001002d00004398sv00001043sd000082EFbc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 18.0: 0600 Host bridge [Created at pci.386] Unique ID: fiDB.ptk_g9XAN03 SysFS ID: /devices/pci0000:00/0000:00:18.0 SysFS BusID: 0000:00:18.0 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration" Vendor: pci 0x1022 "AMD" Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration" Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: ul7N.brJS0BNlui3 Parent ID: vSkL.VFExU1K87o8 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "ATI RS780 [Radeon HD 3200]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x9610 "RS780 [Radeon HD 3200]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Driver: "radeon" Driver Modules: "radeon" Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0xc000-0xc0ff (rw) Memory Range: 0xfbde0000-0xfbdeffff (rw,non-prefetchable) Memory Range: 0xfbc00000-0xfbcfffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 18 (735646 events) Module Alias: "pci:v00001002d00009610sv00001043sd000082F1bc03sc00i00" Driver Info #0: Driver Status: radeon is active Driver Activation Cmd: "modprobe radeon" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 31: PCI 14.2: 0403 Audio device [Created at pci.386] Unique ID: 5Dex.lHWl8+CnBS9 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8346 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfbbf4000-0xfbbf7fff (rw,non-prefetchable) IRQ: 16 (63104 events) Module Alias: "pci:v00001002d00004383sv00001043sd00008346bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 11.0: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: 7EWs.TAH1fijO_RA SysFS ID: /devices/pci0000:00/0000:00:11.0 SysFS BusID: 0000:00:11.0 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4390 "SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xb000-0xb007 (rw) I/O Ports: 0xa000-0xa003 (rw) I/O Ports: 0x9000-0x9007 (rw) I/O Ports: 0x8000-0x8003 (rw) I/O Ports: 0x7000-0x700f (rw) Memory Range: 0xfbbffc00-0xfbbfffff (rw,non-prefetchable) IRQ: 22 (75350 events) Module Alias: "pci:v00001002d00004390sv00001043sd000082EFbc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: PCI 307.0: 0701 Parallel controller (IEEE1284) [Created at pci.386] Unique ID: Phdb.hrZjn8KGT65 Parent ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:03:07.0 SysFS BusID: 0000:03:07.0 Hardware Class: unknown Model: "MosChip PCI 9865 Multi-I/O Controller" Vendor: pci 0x9710 "MosChip Semiconductor Technology Ltd." Device: pci 0x9865 "PCI 9865 Multi-I/O Controller" SubVendor: pci 0xa000 "Asix Electronics Corporation (Wrong ID)" SubDevice: pci 0x2000 Driver: "parport_pc" Driver Modules: "parport_pc", "parport_pc" I/O Ports: 0xe080-0xe087 (rw) I/O Ports: 0xe000-0xe007 (rw) Memory Range: 0xfbffe000-0xfbffefff (rw,non-prefetchable) Memory Range: 0xfbffd000-0xfbffdfff (rw,non-prefetchable) IRQ: 22 (75350 events) Module Alias: "pci:v00009710d00009865sv0000A000sd00002000bc07sc01i03" Driver Info #0: Driver Status: parport_pc is active Driver Activation Cmd: "modprobe parport_pc" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (PCI bridge) 34: PCI 14.0: 0c05 SMBus [Created at pci.386] Unique ID: MZfG.L8nRod4EGm8 SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Revision: 0x3a Module Alias: "pci:v00001002d00004385sv00001043sd000082EFbc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Driver Info #1: Driver Status: sp5100_tco is not active Driver Activation Cmd: "modprobe sp5100_tco" Config Status: cfg=new, avail=yes, need=no, active=unknown 35: PCI 12.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 4g2A.S+1UlTYq5e7 SysFS ID: /devices/pci0000:00/0000:00:12.1 SysFS BusID: 0000:00:12.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82ef "M3A78-EH Motherboard" Driver: "ohci-pci" Memory Range: 0xfbbfe000-0xfbbfefff (rw,non-prefetchable) IRQ: 16 (63104 events) Module Alias: "pci:v00001002d00004398sv00001043sd000082EFbc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 36: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.s6H50+GvIv7 Parent ID: ul7N.brJS0BNlui3 Hardware Class: monitor Model: "PHILIPS PHL 240B4LPY" Vendor: PHL "PHILIPS" Device: eisa 0x08cc "PHL 240B4LPY" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1920x1200@60Hz Size: 518x324 mm Year of Manufacture: 2015 Week of Manufacture: 16 Detailed Timings #0: Resolution: 1920x1200 Horizontal: 1920 1968 2000 2080 (+48 +80 +160) -hsync Vertical: 1200 1203 1209 1235 (+3 +9 +35) +vsync Frequencies: 154.00 MHz, 74.04 kHz, 59.95 Hz Driver Info #0: Max. Resolution: 1920x1200 Vert. Sync Range: 56-76 Hz Hor. Sync Range: 30-83 kHz Bandwidth: 154 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (VGA compatible controller) 38: IDE 600.0: 10600 Disk [Created at block.255] Unique ID: WZeP.xnpY97E+Lw1 Parent ID: 7EWs.TAH1fijO_RA SysFS ID: /class/block/sdb SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata7/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "MAXTOR STM350032" Vendor: "MAXTOR" Device: "STM350032" Revision: "MX15" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sdb Device Files: /dev/sdb, /dev/disk/by-id/ata-MAXTOR_STM3500320AS_..., /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:11.0-ata-3 Device Number: block 8:16-8:31 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 39: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.259] Unique ID: KD9E.NI7hlETwA+4 Parent ID: Eu86.Dp1J4ddEbd0 SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD-ROM GDR8162B" Vendor: "HL-DT-ST" Device: "DVD-ROM GDR8162B" Revision: "0015" Driver: "pata_atiixp", "sr" Driver Modules: "pata_atiixp" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/disk/by-path/pci-0000:00:14.1-ata-1, /dev/cdrom, /dev/disk/by-id/ata-HL-DT-STDVD-ROM_..., /dev/dvd Device Number: block 11:0 (char 21:0) Features: DVD Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (IDE interface) Drive Speed: 48 40: None 00.0: 10600 Disk [Created at block.255] Unique ID: kwWm.Fxp0d3BezAE SysFS ID: /class/block/fd0 SysFS BusID: floppy.0 SysFS Device Link: /devices/platform/floppy.0 Hardware Class: disk Model: "Disk" Driver: "floppy" Driver Modules: "floppy" Device File: /dev/fd0 Device Number: block 2:0 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown 41: IDE 400.0: 10600 Disk [Created at block.255] Unique ID: 3OOL.dNRVye9wOqF Parent ID: 7EWs.TAH1fijO_RA SysFS ID: /class/block/sda SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata5/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "ST3160812AS" Device: "ST3160812AS" Revision: "J" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-ST3160812AS_..., /dev/disk/by-path/pci-0000:00:11.0-ata-1 Device Number: block 8:0-8:15 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (SATA controller) 42: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: CiZ2.jktO0zY2hp1 Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0 SysFS BusID: 3-3:1.0 Hardware Class: mouse Model: "Logitech Optical Wheel Mouse" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc018 "Optical Wheel Mouse" Revision: "43.00" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3, /dev/input/by-id/usb-Logitech_Logitech_USB_Optical_...-event-mouse, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.0-event-mouse, /dev/input/by-id/usb-Logitech_Logitech_USB_Optical_...-mouse, /dev/input/by-path/pci-0000:00:12.0-usb-0:3:1.0-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v046DpC018d4300dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #45 (Hub) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.PaupGMfzSp8 Parent ID: 9n5e.S+1UlTYq5e7 SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 44: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: cLrx._+079NKabk4 Parent ID: k4bc.YdoZZg0c8i6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0 SysFS BusID: 1-2:1.0 Hardware Class: unknown Model: "Samsung Electronics M2070 Series" Hotplug: USB Vendor: usb 0x04e8 "Samsung Electronics Co., Ltd" Device: usb 0x3469 "M2070 Series" Revision: "1.00" Serial ID: -- Speed: 480 Mbps Module Alias: "usb:v04E8p3469d0100dc00dsc00dp00icFFiscFFipFFin00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #50 (Hub) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.7qWCOCfUJwE Parent ID: CLZK.xa5kGvQ7aF7 SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT._WUAGn1cSY8 Parent ID: hB6S.zP_DE2gXd08 SysFS ID: /devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 47: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: KRJj.CpYsQ9Gi5XB Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: keyboard Model: "Dell KB212-B Quiet Key Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2107 "KB212-B Quiet Key Keyboard" Revision: "1.78" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-path/pci-0000:00:12.0-usb-0:1:1.0-event-kbd, /dev/input/by-id/usb-DELL_Dell_USB_Entry_...-event-kbd Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2107d0178dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #45 (Hub) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.uYbnlyRCGC6 Parent ID: 4g2A.S+1UlTYq5e7 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (USB Controller) 49: USB 00.1: 10900 Printer [Created at usb.122] Unique ID: 3X50.G4y1uzX4Me7 Parent ID: k4bc.YdoZZg0c8i6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.1 SysFS BusID: 1-2:1.1 Hardware Class: printer Model: "Samsung Electronics M2070 Series" Hotplug: USB Vendor: usb 0x04e8 "Samsung Electronics Co., Ltd" Device: usb 0x3469 "M2070 Series" Revision: "1.00" Serial ID: -- Driver: "usblp" Driver Modules: "usblp" Speed: 480 Mbps Module Alias: "usb:v04E8p3469d0100dc00dsc00dp00ic07isc01ip02in01" Driver Info #0: Driver Status: usblp is active Driver Activation Cmd: "modprobe usblp" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #50 (Hub) 50: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.YdoZZg0c8i6 Parent ID: x_X+.gAy3xuqLgRE SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 51: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.erpEvbsFWX1 Parent ID: HSco.xa5kGvQ7aF7 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) 52: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.3f5c44ENLJ9 Parent ID: 06bT.gAy3xuqLgRE SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (USB Controller) 53: None 00.0: 10103 CPU [Created at cpu.509] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.107.2 "AMD Athlon(tm) 64 X2 Dual Core Processor 5200+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,rep_good,nopl,cpuid,extd_apicid,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,3dnowprefetch,vmmcall,lbrv Clock: 2400 MHz BogoMips: 5418.28 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 01.0: 10103 CPU [Created at cpu.509] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.107.2 "AMD Athlon(tm) 64 X2 Dual Core Processor 5200+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,rep_good,nopl,cpuid,extd_apicid,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,3dnowprefetch,vmmcall,lbrv Clock: 2400 MHz BogoMips: 5418.24 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 55: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.Wqvrn1KKmEC SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "ATL1E" Driver Modules: "atl1e" Device File: enp2s0 HW Address: 0B9DDAEB7D23EAC46E26EE6333FD07F4 Permanent HW Address: 0B9DDAEB7D23EAC46E26EE6333FD07F4 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (Ethernet controller) 56: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown


Hardware for Linux and BSD

GitHub