edid-decode "/sys/class/drm/card0-eDP-1/edid": EDID (hex): 00ffffffffffff00367f019001000000 000c010380090f782f0000a057499b26 10484f00000001010101010101010101 010101010101c76c0038a1401060640c 7400d88700000018000000fc00425738 0a202020202020202020000000fd003c 3c7d7d10000000000000000000000000 0000000000000000000000000000002b Extracted contents: header: 00 ff ff ff ff ff ff 00 serial number: ... version: 01 03 basic params: 80 09 0f 78 2f chroma info: 00 00 a0 57 49 9b 26 10 48 4f established: 00 00 00 standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 descriptor 1: c7 6c 00 38 a1 40 10 60 64 0c 74 00 d8 87 00 00 00 18 descriptor 2: 00 00 00 fc 00 42 57 38 0a 20 20 20 20 20 20 20 20 20 descriptor 3: 00 00 00 fd 00 3c 3c 7d 7d 10 00 00 00 00 00 00 00 00 descriptor 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 extensions: 00 checksum: 2b EDID version: 1.3 Manufacturer: MS_ Model 9001 Serial Number ... Digital display Maximum image size: 9 cm x 15 cm Gamma: 2.20 DPMS levels: Off RGB color display Default (sRGB) color space is primary color space First detailed timing is preferred timing Supports GTF timings within operating range Display x,y Chromaticity: Red: 0.6250, 0.3398 Green: 0.2851, 0.6054 Blue: 0.1484, 0.0625 White: 0.2812, 0.3085 Established timings supported: Standard timings supported: Detailed mode: Clock 278.470 MHz, 216 mm x 135 mm 2560 2660 2672 2872 hborder 0 1600 1607 1611 1616 vborder 0 -hsync -vsync VertFreq: 60 Hz, HorFreq: 96960 Hz Monitor name: BW8 Monitor ranges (GTF): 60-60Hz V, 125-125kHz H, max dotclock 160MHz Manufacturer-specified data, tag 0 Checksum: 0x2b (valid) EDID block does NOT conform to EDID 1.3! sRGB is signaled, but the chromaticities do not match One or more of the timings is out of range of the Monitor Ranges: Vertical Freq: 60 - 60 Hz Horizontal Freq: 96960 - 96960 Hz Maximum Clock: 278.470 MHz EDID block does not conform at all! Bad year of manufacture Manufacturer name field contains garbage