Probe #edf3eae913 of ASRock 990FX Extreme4 Desktop Computer

Log: dmesg.1

[ 0.000000] Linux version 6.5.0-5-amd64 (XXX@XXX) (gcc-13 (Debian 13.2.0-7) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP PREEMPT_DYNAMIC Debian 6.5.13-1 (2023-11-29) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-5-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.138 MHz processor [ 0.002527] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002531] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008856] AGP: No AGP bridge found [ 0.008915] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008922] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008924] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010694] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010703] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016131] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016908] RAMDISK: [mem 0x2e41d000-0x33205fff] ACPI: Early table checksum verification disabled [ 0.016920] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016925] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016931] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016936] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230331/tbfadt-615) [ 0.016942] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016946] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016949] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016953] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016957] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016960] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016964] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016968] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016971] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016975] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017056] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017399] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017407] Movable zone start for each node [ 0.017410] Early memory node ranges [ 0.017411] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017473] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027519] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027545] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027560] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028458] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028519] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028746] ACPI: PM-Timer IO Port: 0x808 [ 0.028754] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028763] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028766] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028769] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028776] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028777] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028782] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.028801] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028832] Booting paravirtualized kernel on bare hardware [ 0.028834] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.033808] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.034517] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.034525] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.034529] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.034555] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-5-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.034608] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.5.0-5-amd64", will be passed to user space. [ 0.041210] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.044549] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.044642] Fallback order for Node 0: 0 [ 0.044647] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.044649] Policy zone: Normal [ 0.044657] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.044659] AGP: Checking aperture... [ 0.050969] AGP: No AGP bridge found [ 0.050971] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.050973] Aperture pointing to e820 RAM. Ignoring. [ 0.050974] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.050975] AGP: Please enable the IOMMU option in the BIOS setup [ 0.050976] AGP: This costs you 64MB of RAM [ 0.050978] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.050981] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.097128] Memory: 3110904K/25119580K available (14336K kernel code, 2347K rwdata, 10348K rodata, 3932K init, 18128K bss, 712316K reserved, 0K cma-reserved) [ 0.106343] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.106533] ftrace: allocating 42194 entries in 165 pages [ 0.119437] ftrace: allocated 165 pages with 4 groups [ 0.120589] Dynamic Preempt: voluntary [ 0.120751] rcu: Preemptible hierarchical RCU implementation. [ 0.120752] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.120753] Trampoline variant of Tasks RCU enabled. [ 0.120754] Rude variant of Tasks RCU enabled. [ 0.120755] Tracing variant of Tasks RCU enabled. [ 0.120755] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.120756] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.124915] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.125111] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.125212] spurious 8259A interrupt: IRQ7. [ 0.127121] Console: colour VGA+ 80x25 [ 0.127123] printk: console [tty0] enabled [ 0.127383] ACPI: Core revision 20230331 [ 0.127562] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.127575] APIC: Switch to symmetric I/O mode setup [ 0.127921] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.147577] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c95f593093, max_idle_ns: 440795236676 ns [ 0.147583] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.27 BogoMIPS (lpj=12372552) [ 0.147607] LVT offset 1 assigned for vector 0xf9 [ 0.147614] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.147615] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.147620] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.147622] Spectre V2 : Mitigation: Retpolines [ 0.147623] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.147624] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.147625] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.147626] RETBleed: Mitigation: untrained return thunk [ 0.147628] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.147630] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.147634] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.147635] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.147636] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.147638] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.147640] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.174253] Freeing SMP alternatives memory: 36K [ 0.174258] pid_max: default: 32768 minimum: 301 [ 0.175112] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.175366] landlock: Up and running. [ 0.175367] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.175400] AppArmor: AppArmor initialized [ 0.175402] TOMOYO Linux initialized [ 0.175409] LSM support for eBPF active [ 0.175796] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.175881] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289859] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.290090] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.290115] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.290137] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.290160] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.290186] ... version: 0 [ 0.290187] ... bit width: 48 [ 0.290188] ... generic registers: 6 [ 0.290189] ... value mask: 0000ffffffffffff [ 0.290190] ... max period: 00007fffffffffff [ 0.290191] ... fixed-purpose events: 0 [ 0.290192] ... event mask: 000000000000003f [ 0.290298] signal: max sigframe size: 1776 [ 0.290335] rcu: Hierarchical SRCU implementation. [ 0.290336] rcu: Max phase no-delay instances is 1000. [ 0.291580] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.291580] smp: Bringing up secondary CPUs ... [ 0.291580] smpboot: x86: Booting SMP configuration: [ 0.291580] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.321584] smp: Brought up 1 node, 8 CPUs [ 0.321584] smpboot: Max logical packages: 1 [ 0.321584] smpboot: Total of 8 processors activated (49490.20 BogoMIPS) [ 0.379774] node 0 deferred pages initialised in 56ms [ 0.380759] devtmpfs: initialized [ 0.380759] x86/mm: Memory block size: 128MB [ 0.384823] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.384823] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.384823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.384823] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.384823] pinctrl core: initialized pinctrl subsystem [ 0.385300] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.386143] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.388165] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.388925] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.389290] thermal_sys: Registered thermal governor 'fair_share' [ 0.389290] thermal_sys: Registered thermal governor 'bang_bang' [ 0.389290] thermal_sys: Registered thermal governor 'step_wise' [ 0.389290] thermal_sys: Registered thermal governor 'user_space' [ 0.389290] thermal_sys: Registered thermal governor 'power_allocator' [ 0.389290] cpuidle: using governor ladder [ 0.389290] cpuidle: using governor menu [ 0.389290] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.389290] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.389290] PCI: not using MMCONFIG [ 0.389290] PCI: Using configuration type 1 for base access [ 0.389290] PCI: Using configuration type 1 for extended access [ 0.389290] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.389290] mtrr: probably your BIOS does not setup all CPUs. [ 0.389290] mtrr: corrected configuration. [ 0.389290] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.389290] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389290] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.389290] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389290] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.391734] ACPI: Added _OSI(Module Device) [ 0.391736] ACPI: Added _OSI(Processor Device) [ 0.391738] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.391739] ACPI: Added _OSI(Processor Aggregator Device) [ 0.396094] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.411845] ACPI: Interpreter enabled [ 0.411865] ACPI: PM: (supports S0 S3 S4 S5) [ 0.411866] ACPI: Using IOAPIC for interrupt routing [ 0.412016] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.412055] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.412070] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.412072] PCI: Using E820 reservations for host bridge windows [ 0.412221] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.420192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.420198] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.420586] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.420743] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.420761] pci 0000:00:02.0: enabling Extended Tags [ 0.420786] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.420882] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.420900] pci 0000:00:04.0: enabling Extended Tags [ 0.420923] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.421027] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.421045] pci 0000:00:05.0: enabling Extended Tags [ 0.421068] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.421182] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.421199] pci 0000:00:06.0: enabling Extended Tags [ 0.421222] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.421315] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.421333] pci 0000:00:09.0: enabling Extended Tags [ 0.421355] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.421453] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.421470] pci 0000:00:0a.0: enabling Extended Tags [ 0.421493] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.421594] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.421607] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.421768] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.421781] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.421920] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.421983] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.422072] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.422085] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.422231] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.422293] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.422385] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.422514] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.422527] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.422683] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.422821] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.422975] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.423087] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.423101] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.423254] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.423400] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.423462] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.423556] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.423618] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.423671] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.423723] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.423779] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.423834] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.423930] pci 0000:01:00.0: [1002:6898] type 00 class 0x030000 [ 0.423943] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.423990] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.424107] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300 [ 0.424121] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.424183] pci 0000:01:00.1: supports D1 D2 [ 0.424269] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.424338] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.424413] pci 0000:02:00.0: PME# supported from D3hot [ 0.424492] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.424563] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.424643] pci 0000:03:00.0: supports D1 D2 [ 0.424644] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424739] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.424835] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.424916] pci 0000:04:00.0: supports D1 D2 [ 0.424918] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425017] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.425094] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.425180] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.425291] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.425306] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.425406] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.435603] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.435686] pci 0000:06:00.0: reg 0x10: [mem 0xd0010000-0xd001ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0000000-0xd000ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.435977] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.436029] pci 0000:07:05.0: [1106:3038] type 00 class 0x0c0300 [ 0.436079] pci 0000:07:05.0: reg 0x20: [io 0xb020-0xb03f] pci 0000:07:05.0: supports D1 D2 [ 0.436127] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.436194] pci 0000:07:05.1: [1106:3038] type 00 class 0x0c0300 [ 0.436244] pci 0000:07:05.1: reg 0x20: [io 0xb000-0xb01f] pci 0000:07:05.1: supports D1 D2 [ 0.436292] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.436354] pci 0000:07:05.2: [1106:3104] type 00 class 0x0c0320 [ 0.436372] pci 0000:07:05.2: reg 0x10: [mem 0xfe401000-0xfe4010ff] pci 0000:07:05.2: supports D1 D2 [ 0.436452] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.436519] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.436537] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.436690] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.436694] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.436703] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.436705] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.436707] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.436709] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.436711] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.437515] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.437576] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.437639] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.437701] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.437752] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.437792] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.437832] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.437872] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.438061] iommu: Default domain type: Translated [ 0.438061] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.438061] pps_core: LinuxPPS API ver. 1 registered [ 0.438061] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.438061] PTP clock support registered [ 0.438061] EDAC MC: Ver: 3.0.0 [ 0.438061] NetLabel: Initializing [ 0.438061] NetLabel: domain hash size = 128 [ 0.438061] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.438061] NetLabel: unlabeled traffic allowed by default [ 0.438061] PCI: Using ACPI for IRQ routing [ 0.443094] PCI: pci_cache_line_size set to 64 bytes [ 0.443165] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.443622] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.443622] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.443622] vgaarb: loaded [ 0.443666] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.443671] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.444690] clocksource: Switched to clocksource tsc-early [ 0.445544] VFS: Disk quotas dquot_6.6.0 [ 0.445632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.445905] AppArmor: AppArmor Filesystem Enabled [ 0.445929] pnp: PnP ACPI init [ 0.446078] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.446228] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.446745] system 00:03: [io 0x040b] has been reserved [ 0.446749] system 00:03: [io 0x04d6] has been reserved [ 0.446752] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.446756] system 00:03: [io 0x0c14] has been reserved [ 0.446759] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.446762] system 00:03: [io 0x0c52] has been reserved [ 0.446765] system 00:03: [io 0x0c6c] has been reserved [ 0.446767] system 00:03: [io 0x0c6f] has been reserved [ 0.446770] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.446773] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.446775] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.446778] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.446781] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.446783] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.446786] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.446789] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.446792] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.446796] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.446800] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.446804] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.446808] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.446812] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.446816] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.446819] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.446819] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.446819] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.446819] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.446860] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.454668] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.455063] NET: Registered PF_INET protocol family [ 0.455500] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.460682] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.460776] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.461183] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.461985] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.462337] TCP: Hash tables configured (established 262144 bind 65536) [ 0.462771] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.463005] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.463173] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.463371] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.463381] NET: Registered PF_XDP protocol family [ 0.463407] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 25613 usecs [ 0.509830] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19335 usecs [ 0.529829] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19331 usecs [ 0.549829] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19520 usecs [ 0.550073] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.550676] PCI: CLS 64 bytes, default 64 [ 0.550769] Trying to unpack rootfs image as initramfs... [ 0.551704] PCI-DMA: Disabling AGP. [ 0.551793] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.551796] PCI-DMA: using GART IOMMU. [ 0.551799] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.552667] software IO TLB: tearing down default memory pool [ 0.557524] LVT offset 0 assigned for vector 0x400 [ 0.558055] perf: AMD IBS detected (0x000000ff) [ 0.558063] amd_uncore: 4 amd_nb counters detected [ 0.559789] Initialise system trusted keyrings [ 0.559815] Key type blacklist registered [ 0.559882] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.559899] zbud: loaded [ 0.560576] integrity: Platform Keyring initialized [ 0.560586] integrity: Machine keyring initialized [ 0.560589] Key type asymmetric registered [ 0.560590] Asymmetric key parser 'x509' registered [ 1.426020] Freeing initrd memory: 79780K [ 1.432530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.432591] io scheduler mq-deadline registered [ 1.434855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.434912] ACPI: \_PR_.P001: Found 2 idle states [ 1.435015] ACPI: \_PR_.P002: Found 2 idle states [ 1.435107] ACPI: \_PR_.P003: Found 2 idle states [ 1.435199] ACPI: \_PR_.P004: Found 2 idle states [ 1.435284] ACPI: \_PR_.P005: Found 2 idle states [ 1.435392] ACPI: \_PR_.P006: Found 2 idle states [ 1.435485] ACPI: \_PR_.P007: Found 2 idle states [ 1.435668] ACPI: \_PR_.P008: Found 2 idle states [ 1.435969] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.436149] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.436951] Linux agpgart interface v0.103 [ 1.437019] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.437777] i8042: PNP: No PS/2 controller found. [ 1.437858] mousedev: PS/2 mouse device common for all mice [ 1.437878] rtc_cmos 00:06: RTC can wake from S4 [ 1.438086] rtc_cmos 00:06: registered as rtc0 [ 1.438109] rtc_cmos 00:06: setting system clock to 2023-12-29T10:42:29 UTC (1703846549) [ 1.438138] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.438148] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.438250] ledtrig-cpu: registered to indicate activity on CPUs [ 1.452074] NET: Registered PF_INET6 protocol family [ 1.458270] Segment Routing with IPv6 [ 1.458287] In-situ OAM (IOAM) with IPv6 [ 1.458311] mip6: Mobile IPv6 [ 1.458315] NET: Registered PF_PACKET protocol family [ 1.458353] mpls_gso: MPLS GSO support [ 1.458368] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.458891] microcode: microcode updated early to new patch_level=0x0600063e [ 1.458931] microcode: CPU1: patch_level=0x0600063e [ 1.458931] microcode: CPU0: patch_level=0x0600063e [ 1.458933] microcode: CPU3: patch_level=0x0600063e [ 1.458933] microcode: CPU2: patch_level=0x0600063e [ 1.458937] microcode: CPU5: patch_level=0x0600063e [ 1.458937] microcode: CPU4: patch_level=0x0600063e [ 1.458939] microcode: CPU6: patch_level=0x0600063e [ 1.458939] microcode: CPU7: patch_level=0x0600063e [ 1.465071] microcode: CPU1: new patch_level=0x0600063e [ 1.471203] microcode: CPU5: new patch_level=0x0600063e [ 1.471204] microcode: CPU4: new patch_level=0x0600063e [ 1.465075] microcode: CPU3: new patch_level=0x0600063e [ 1.471208] microcode: CPU6: new patch_level=0x0600063e [ 1.471213] microcode: CPU0: new patch_level=0x0600063e [ 1.471215] microcode: CPU7: new patch_level=0x0600063e [ 1.471215] microcode: CPU2: new patch_level=0x0600063e [ 1.471272] microcode: Microcode Update Driver: v2.2. [ 1.471280] IPI shorthand broadcast: enabled [ 1.472830] sched_clock: Marking stable (1468818689, 2448773)->(1493464334, -22196872) [ 1.473113] registered taskstats version 1 [ 1.473227] Loading compiled-in X.509 certificates [ 1.500274] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.500299] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.502747] Key type .fscrypt registered [ 1.502749] Key type fscrypt-provisioning registered [ 1.508233] Key type encrypted registered [ 1.508239] AppArmor: AppArmor sha1 policy hashing enabled [ 1.508250] ima: No TPM chip found, activating TPM-bypass! [ 1.508251] ima: Allocated hash algorithm: sha256 [ 1.508267] ima: No architecture policies found [ 1.508280] evm: Initialising EVM extended attributes: [ 1.508281] evm: security.selinux [ 1.508282] evm: security.SMACK64 (disabled) [ 1.508283] evm: security.SMACK64EXEC (disabled) [ 1.508285] evm: security.SMACK64TRANSMUTE (disabled) [ 1.508286] evm: security.SMACK64MMAP (disabled) [ 1.508287] evm: security.apparmor [ 1.508288] evm: security.ima [ 1.508288] evm: security.capability [ 1.508289] evm: HMAC attrs: 0x1 [ 1.566553] tsc: Refined TSC clocksource calibration: 3093.304 MHz [ 1.566572] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969257c06, max_idle_ns: 440795235033 ns [ 1.566636] clocksource: Switched to clocksource tsc [ 1.644624] RAS: Correctable Errors collector initialized. [ 1.644689] clk: Disabling unused clocks [ 1.646580] Freeing unused decrypted memory: 2036K [ 1.647621] Freeing unused kernel image (initmem) memory: 3932K [ 1.658568] Write protecting the kernel read-only data: 26624k [ 1.659388] Freeing unused kernel image (rodata/data gap) memory: 1940K [ 1.722470] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.722475] Run /init as init process [ 1.722476] with arguments: [ 1.722477] /init [ 1.722478] with environment: [ 1.722479] HOME=/ [ 1.722480] TERM=linux [ 1.722481] BOOT_IMAGE=/boot/vmlinuz-6.5.0-5-amd64 [ 1.873185] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.873249] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.880605] Floppy drive(s): fd0 is 1.44M [ 1.886974] ACPI: button: Power Button [PWRF] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.899278] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.899450] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.905811] SCSI subsystem initialized [ 1.907704] FDC 0 is a post-1991 82077 [ 1.918514] ACPI: bus type USB registered [ 1.918571] usbcore: registered new interface driver usbfs [ 1.918600] usbcore: registered new interface driver hub [ 1.918625] usbcore: registered new device driver usb [ 1.943459] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 1.943466] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.943469] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] ACPI: bus type drm_connector registered [ 1.954800] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 1.966178] libata version 3.00 loaded. [ 1.970535] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.971323] pata_via 0000:05:00.1: version 0.3.4 [ 1.972046] QUIRK: Enable AMD PLL fix [ 1.972078] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.972086] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.972091] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.972100] ehci-pci 0000:00:12.2: debug port 1 [ 1.972140] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.972517] scsi host0: pata_via [ 1.972935] scsi host1: pata_via [ 1.973002] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 [ 1.973005] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 [ 1.975277] scsi host2: pata_atiixp [ 1.975451] scsi host3: pata_atiixp [ 1.975520] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.975523] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.986473] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.986561] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.986565] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.986568] usb usb1: Product: EHCI Host Controller [ 1.986570] usb usb1: Manufacturer: Linux 6.5.0-5-amd64 ehci_hcd [ 1.986572] usb usb1: SerialNumber: ... [ 1.986746] hub 1-0:1.0: USB hub found [ 1.986756] hub 1-0:1.0: 5 ports detected [ 1.987027] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.987033] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.987038] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.987046] ehci-pci 0000:00:13.2: debug port 1 [ 1.987076] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.002551] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.002687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.002690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.002696] usb usb2: Product: EHCI Host Controller [ 2.002697] usb usb2: Manufacturer: Linux 6.5.0-5-amd64 ehci_hcd [ 2.002699] usb usb2: SerialNumber: ... [ 2.002849] hub 2-0:1.0: USB hub found [ 2.002858] hub 2-0:1.0: 5 ports detected [ 2.003099] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.003105] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.003109] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.003118] ehci-pci 0000:00:16.2: debug port 1 [ 2.003148] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.018479] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.018540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.018543] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.018546] usb usb3: Product: EHCI Host Controller [ 2.018547] usb usb3: Manufacturer: Linux 6.5.0-5-amd64 ehci_hcd [ 2.018549] usb usb3: SerialNumber: ... [ 2.018701] hub 3-0:1.0: USB hub found [ 2.018710] hub 3-0:1.0: 4 ports detected [ 2.018911] ehci-pci 0000:07:05.2: EHCI Host Controller [ 2.018918] ehci-pci 0000:07:05.2: new USB bus registered, assigned bus number 4 [ 2.018975] ehci-pci 0000:07:05.2: irq 22, io mem 0xfe401000 [ 2.034555] ehci-pci 0000:07:05.2: USB 2.0 started, EHCI 1.00 [ 2.034684] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.034687] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.034691] usb usb4: Product: EHCI Host Controller [ 2.034696] usb usb4: Manufacturer: Linux 6.5.0-5-amd64 ehci_hcd [ 2.034698] usb usb4: SerialNumber: ... [ 2.034844] hub 4-0:1.0: USB hub found [ 2.034851] hub 4-0:1.0: 4 ports detected [ 2.035059] uhci_hcd 0000:07:05.0: UHCI Host Controller [ 2.035071] uhci_hcd 0000:07:05.0: new USB bus registered, assigned bus number 5 [ 2.035078] uhci_hcd 0000:07:05.0: detected 2 ports [ 2.035105] uhci_hcd 0000:07:05.0: irq 20, io port 0x0000b020 [ 2.035171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.035174] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.035176] usb usb5: Product: UHCI Host Controller [ 2.035178] usb usb5: Manufacturer: Linux 6.5.0-5-amd64 uhci_hcd [ 2.035179] usb usb5: SerialNumber: ... [ 2.035451] hub 5-0:1.0: USB hub found [ 2.035461] hub 5-0:1.0: 2 ports detected [ 2.035709] uhci_hcd 0000:07:05.1: UHCI Host Controller [ 2.035714] uhci_hcd 0000:07:05.1: new USB bus registered, assigned bus number 6 [ 2.035721] uhci_hcd 0000:07:05.1: detected 2 ports [ 2.035748] uhci_hcd 0000:07:05.1: irq 21, io port 0x0000b000 [ 2.035802] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.035804] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.035807] usb usb6: Product: UHCI Host Controller [ 2.035808] usb usb6: Manufacturer: Linux 6.5.0-5-amd64 uhci_hcd [ 2.035810] usb usb6: SerialNumber: ... [ 2.035936] hub 6-0:1.0: USB hub found [ 2.035944] hub 6-0:1.0: 2 ports detected [ 2.148985] ata3.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.148990] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.148995] ata3.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.148998] ata3.00: limited to UDMA/33 due to 40-wire cable [ 2.148999] ata3.01: limited to UDMA/33 due to 40-wire cable [ 2.290551] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 2.302880] scsi 2:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.304239] scsi 2:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.347033] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.347041] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7 [ 2.347073] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.347088] ahci 0000:00:11.0: version 3.0 [ 2.347304] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.347309] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.347819] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.347827] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 2.347890] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.348135] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.348140] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 2.348144] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.348202] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.348206] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.348209] usb usb8: Product: xHCI Host Controller [ 2.348211] usb usb8: Manufacturer: Linux 6.5.0-5-amd64 xhci-hcd [ 2.348212] usb usb8: SerialNumber: ... [ 2.348952] hub 8-0:1.0: USB hub found [ 2.348978] hub 8-0:1.0: 2 ports detected [ 2.349153] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.349197] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 2.349200] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.349202] usb usb9: Product: xHCI Host Controller [ 2.349204] usb usb9: Manufacturer: Linux 6.5.0-5-amd64 xhci-hcd [ 2.349206] usb usb9: SerialNumber: ... [ 2.349360] hub 9-0:1.0: USB hub found [ 2.349372] hub 9-0:1.0: 2 ports detected [ 2.349474] scsi host4: ahci [ 2.349693] scsi host5: ahci [ 2.349891] scsi host6: ahci [ 2.349983] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.349989] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10 [ 2.350056] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.350088] scsi host7: ahci [ 2.350191] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.350195] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.350197] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.350200] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.350389] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.350394] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11 [ 2.350397] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.350445] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 2.350458] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.350460] usb usb10: Product: xHCI Host Controller [ 2.350462] usb usb10: Manufacturer: Linux 6.5.0-5-amd64 xhci-hcd [ 2.350464] usb usb10: SerialNumber: ... [ 2.350641] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.350645] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.351130] hub 10-0:1.0: USB hub found [ 2.351172] scsi host8: ahci [ 2.351262] hub 10-0:1.0: 2 ports detected [ 2.351373] scsi host9: ahci [ 2.351444] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 [ 2.351447] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 [ 2.351553] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.351582] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 2.351585] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.351587] usb usb11: Product: xHCI Host Controller [ 2.351588] usb usb11: Manufacturer: Linux 6.5.0-5-amd64 xhci-hcd [ 2.351590] usb usb11: SerialNumber: ... [ 2.351719] hub 11-0:1.0: USB hub found [ 2.351728] hub 11-0:1.0: 2 ports detected [ 2.410639] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.410644] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.410646] usb usb7: Product: OHCI PCI host controller [ 2.410648] usb usb7: Manufacturer: Linux 6.5.0-5-amd64 ohci_hcd [ 2.410650] usb usb7: SerialNumber: ... [ 2.410802] hub 7-0:1.0: USB hub found [ 2.410812] hub 7-0:1.0: 5 ports detected [ 2.411207] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.411213] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 12 [ 2.411239] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.450944] usb 4-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.450948] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.451234] hub 4-1:1.0: USB hub found [ 2.451320] hub 4-1:1.0: 2 ports detected [ 2.474618] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.474623] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.474626] usb usb12: Product: OHCI PCI host controller [ 2.474627] usb usb12: Manufacturer: Linux 6.5.0-5-amd64 ohci_hcd [ 2.474629] usb usb12: SerialNumber: ... [ 2.474793] hub 12-0:1.0: USB hub found [ 2.474812] hub 12-0:1.0: 5 ports detected [ 2.475176] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.475182] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 13 [ 2.475203] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.494898] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.538626] usb usb13: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.538630] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.538633] usb usb13: Product: OHCI PCI host controller [ 2.538634] usb usb13: Manufacturer: Linux 6.5.0-5-amd64 ohci_hcd [ 2.538635] usb usb13: SerialNumber: ... [ 2.538855] hub 13-0:1.0: USB hub found [ 2.538864] hub 13-0:1.0: 2 ports detected [ 2.539160] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.539166] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 14 [ 2.539187] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.602572] usb usb14: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 2.602576] usb usb14: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.602578] usb usb14: Product: OHCI PCI host controller [ 2.602580] usb usb14: Manufacturer: Linux 6.5.0-5-amd64 ohci_hcd [ 2.602581] usb usb14: SerialNumber: ... [ 2.602719] hub 14-0:1.0: USB hub found [ 2.602727] hub 14-0:1.0: 4 ports detected [ 2.666061] ata9: SATA link down (SStatus 0 SControl 330) [ 2.666472] ata10: SATA link down (SStatus 0 SControl 330) [ 2.678553] usb 7-1: new low-speed USB device number 2 using ohci-pci [ 2.738551] usb 4-1.2: new high-speed USB device number 3 using ehci-pci [ 2.742550] usb 12-2: new full-speed USB device number 2 using ohci-pci [ 2.826480] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.826500] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.826568] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.826621] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.826659] ata6.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.826689] ata6.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.826803] ata6.00: configured for UDMA/133 [ 2.827656] ata7.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.827897] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.828133] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 2.828407] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.828872] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.829094] ata7.00: configured for UDMA/133 [ 2.829280] ata8.00: configured for UDMA/133 [ 2.830681] ata5.00: configured for UDMA/133 [ 2.830859] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 2.831435] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.831994] scsi 6:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.833839] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.847387] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.847392] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.847395] usb 4-1.2: Product: 802.11n NIC [ 2.847396] usb 4-1.2: Manufacturer: Realtek [ 2.847398] usb 4-1.2: SerialNumber: ... [ 2.963673] usb 12-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 2.963679] usb 12-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.963682] usb 12-2: Product: A4Tech Gaming Mouse [ 2.963684] usb 12-2: Manufacturer: PixArt [ 2.970043] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.970048] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.970109] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.979474] hid: raw HID events driver (C) Jiri Kosina [ 3.006558] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 3.023140] sd 2:0:0:0: [sda] Write Protect is off [ 3.023146] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.023192] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.023243] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.023442] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 3.023801] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.023804] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.023809] sd 5:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.023815] sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.023819] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 3.023827] sd 4:0:0:0: [sdb] Write Protect is off [ 3.023830] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.023838] sd 6:0:0:0: [sdd] Write Protect is off [ 3.023840] sd 5:0:0:0: [sdc] Write Protect is off [ 3.023842] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.023846] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.023864] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.023876] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.023887] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.023911] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.023922] sd 6:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.023935] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.024578] sda: sda1 sda2 [ 3.024781] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.025080] sdc: sdc1 sdc2 sdc3 [ 3.025276] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.041254] sdb: sdb1 sdb2 sdb3 [ 3.041486] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.048914] sdd: sdd1 sdd2 [ 3.049105] sd 6:0:0:0: [sdd] Attached SCSI disk [ 3.060929] usbcore: registered new interface driver usbhid [ 3.060933] usbhid: USB HID core driver [ 3.063265] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb12/12-2/12-2:1.0/0003:09DA:3519.0001/input/input2 [ 3.063368] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 3.063700] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:13.0/usb12/12-2/12-2:1.1/0003:09DA:3519.0002/input/input4 [ 3.078631] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.116657] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.122678] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 3.224621] [drm] radeon kernel modesetting enabled. [ 3.224763] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 3.225246] Console: switching to colour dummy device 80x25 [ 3.225653] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898 0x1462:0x2100 0x00). [ 3.225742] ATOM BIOS: 113 [ 3.225792] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 3.225795] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 3.225800] [drm] Detected VRAM RAM=1024M, BAR=256M [ 3.225801] [drm] RAM width 256bits DDR [ 3.225875] [drm] radeon: 1024M of VRAM memory ready [ 3.225877] [drm] radeon: 1024M of GTT memory ready. [ 3.225884] [drm] Loading CYPRESS Microcode [ 3.225922] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_pfp.bin [ 3.225988] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_me.bin [ 3.226056] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_rlc.bin [ 3.226115] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_smc.bin [ 3.226315] [drm] Internal thermal controller with fan control [ 3.251467] [drm] radeon: dpm initialized [ 3.251542] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin [ 3.252451] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.253486] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3.274101] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 3.274176] radeon 0000:01:00.0: WB enabled [ 3.274178] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 3.274180] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 3.274567] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 3.274811] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 3.274869] radeon 0000:01:00.0: radeon: using MSI. [ 3.274891] [drm] radeon: irq initialized. [ 3.291112] [drm] ring test on 0 succeeded in 1 usecs [ 3.291117] [drm] ring test on 3 succeeded in 2 usecs [ 3.486705] [drm] ring test on 5 succeeded in 1 usecs [ 3.486710] [drm] UVD initialized successfully. [ 3.486951] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.486987] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.514473] usb 12-3: new full-speed USB device number 3 using ohci-pci [ 3.659437] usb 1-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.659442] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.659445] usb 1-2: SerialNumber: ... [ 3.709710] usb 12-3: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.709722] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.709728] usb 12-3: Product: USB Device [ 3.709732] usb 12-3: Manufacturer: COMPANY [ 3.716111] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.0/0003:09DA:FAA8.0003/input/input5 [ 3.774722] hid-generic 0003:09DA:FAA8.0003: input,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input0 [ 3.777906] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.1/0003:09DA:FAA8.0004/input/input6 [ 3.777995] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:13.0-3/input1 [ 3.782190] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.2/0003:09DA:FAA8.0005/input/input7 [ 3.838688] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.2/0003:09DA:FAA8.0005/input/input8 [ 3.838827] hid-generic 0003:09DA:FAA8.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input2 [ 4.158574] [drm] ib test on ring 5 succeeded [ 4.159382] [drm] Radeon Display Connectors [ 4.159384] [drm] Connector 0: [ 4.159386] [drm] DP-1 [ 4.159387] [drm] HPD4 [ 4.159388] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 4.159391] [drm] Encoders: [ 4.159392] [drm] DFP1: INTERNAL_UNIPHY2 [ 4.159393] [drm] Connector 1: [ 4.159394] [drm] HDMI-A-1 [ 4.159395] [drm] HPD5 [ 4.159396] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 4.159399] [drm] Encoders: [ 4.159400] [drm] DFP2: INTERNAL_UNIPHY2 [ 4.159401] [drm] Connector 2: [ 4.159402] [drm] DVI-I-1 [ 4.159403] [drm] HPD1 [ 4.159404] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 4.159407] [drm] Encoders: [ 4.159408] [drm] DFP3: INTERNAL_UNIPHY1 [ 4.159409] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 4.159410] [drm] Connector 3: [ 4.159411] [drm] DVI-I-2 [ 4.159412] [drm] HPD6 [ 4.159413] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 4.159415] [drm] Encoders: [ 4.159416] [drm] DFP4: INTERNAL_UNIPHY [ 4.159417] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.169304] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 4.250823] [drm] fb mappable at 0xC034D000 [ 4.250825] [drm] vram apper at 0xC0000000 [ 4.250826] [drm] size 5242880 [ 4.250827] [drm] fb depth is 24 [ 4.250828] [drm] pitch is 5120 [ 4.250964] fbcon: radeondrmfb (fb0) is primary device [ 4.280862] Console: switching to colour frame buffer device 160x64 [ 4.283160] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 4.384460] usb 7-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.384466] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.384469] usb 7-1: Product: NOVA AVR [ 4.384470] usb 7-1: Manufacturer: MGE UPS SYSTEMS [ 6.918658] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:12.0-1/input0 [ 7.091760] [drm] amdgpu kernel modesetting enabled. [ 7.091987] amdgpu: CRAT table disabled by module option [ 7.091991] amdgpu: Virtual CRAT table created for CPU [ 7.092015] amdgpu: Topology: Add CPU node [ 7.206466] raid6: sse2x4 gen() 12468 MB/s [ 7.274467] raid6: sse2x2 gen() 11565 MB/s [ 7.342468] raid6: sse2x1 gen() 7840 MB/s [ 7.342470] raid6: using algorithm sse2x4 gen() 12468 MB/s [ 7.410465] raid6: .... xor() 4528 MB/s, rmw enabled [ 7.410467] raid6: using ssse3x2 recovery algorithm [ 7.411839] xor: automatically using best checksumming function avx [ 7.412659] async_tx: api initialized (async) [ 7.661544] Btrfs loaded, zoned=yes, fsverity=yes [ 20.487530] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 20.487586] floppy: error 10 while reading block 0 [ 20.761607] EXT4-fs (sdc2): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 20.852227] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 21.354842] loop: module loaded [ 21.360712] fuse: init (API version 7.38) [ 21.368726] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 21.368771] device-mapper: uevent: version 1.0.3 [ 21.368889] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 21.380871] EXT4-fs (sdc2): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. Quota mode: none. [ 21.391472] lp: driver loaded but no devices found [ 21.396405] ppdev: user-space parallel port driver [ 21.662466] random: crng init done [ 21.703240] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 21.703340] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 21.703400] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 21.703454] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 21.703508] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 21.703560] sr 7:0:0:0: Attached scsi generic sg5 type 5 [ 21.814978] acpi_cpufreq: overriding BIOS provided _PSD data [ 21.820708] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 21.825672] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 21.827924] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 21.837281] mc: Linux media interface: v0.10 [ 21.837780] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 21.889579] cryptd: max_cpu_qlen set to 1000 [ 21.909843] videodev: Linux video capture interface: v2.00 [ 21.927102] AVX version of gcm_enc/dec engaged. [ 21.927156] AES CTR mode by8 optimization enabled [ 21.985389] usb 1-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 21.988946] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 21.989064] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 21.989071] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 22.026490] Registered IR keymap rc-avermedia-m135a [ 22.031258] usbcore: registered new interface driver uvcvideo [ 22.036834] IR NEC protocol handler initialized [ 22.048921] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon]) [ 22.062378] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 22.063128] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 22.063194] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 22.063271] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 22.092640] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 22.092654] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.092657] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 22.092661] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 22.092663] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 22.092665] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 22.092667] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 22.092670] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 22.092672] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 22.109813] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 22.109938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 22.110044] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 22.110134] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 22.110226] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 22.110324] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 22.110408] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 22.110509] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 22.145470] alsactl[1109]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 22.170404] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.170885] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 22.171218] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 22.171527] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.172870] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 22.173577] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 22.230568] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 22.230581] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 22.230586] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 22.230590] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230593] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 22.230596] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230598] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230601] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230604] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230607] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230616] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230618] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230619] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230620] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230622] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.230623] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.296439] kvm_amd: TSC scaling supported [ 22.296443] kvm_amd: Nested Virtualization enabled [ 22.296444] kvm_amd: Nested Paging enabled [ 22.296451] kvm_amd: LBR virtualization supported [ 22.306471] tuner: 14-004b: Tuner -1 found with type(s) Radio TV. [ 22.308664] MCE: In-kernel MCE decoding enabled. [ 22.434474] tda829x 14-004b: setting tuner address to 60 [ 22.530554] tda829x 14-004b: type set to tda8290+75a [ 22.595322] usb 4-1.2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 22.595337] usb 4-1.2: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 22.595343] usb 4-1.2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 22.596176] usb 4-1.2: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 22.596543] usb 4-1.2: Firmware revision 28.0 (signature 0x88e1) [ 23.250560] usbcore: registered new interface driver rtl8xxxu [ 23.260495] rtl8xxxu 4-1.2:1.0 wlxd037459855f3: renamed from wlan0 [ 23.414103] usb 1-2: set resolution quirk: cval->res = 384 [ 23.415207] usbcore: registered new interface driver snd-usb-audio [ 26.783288] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 26.783503] saa7134: saa7133[0]: registered device radio0 [ 26.802667] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 26.802756] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 31.616383] Process accounting resumed [ 31.748633] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 31.871588] NET: Registered PF_QIPCRTR protocol family [ 32.031973] vboxdrv: loading out-of-tree module taints kernel. [ 32.031990] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 32.062532] vboxdrv: Found 8 processor cores/threads [ 32.086763] vboxdrv: TSC mode is Invariant, tentative frequency 3093296802 Hz [ 32.086767] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004) [ 32.305808] VBoxNetFlt: Successfully started. [ 32.313546] VBoxNetAdp: Successfully started. [ 33.548153] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 [ 33.553473] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 33.555677] wlxd037459855f3: authenticated [ 33.562504] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 33.569982] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=4) [ 33.571718] usb 4-1.2: rtl8xxxu_bss_info_changed: HT supported [ 33.573972] wlxd037459855f3: associated [ 33.597256] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 33.631121] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 33.631128] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 33.631130] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 35.562559] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 43.550780] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 50.786929] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 55.927029] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 60.427132] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 64.031173] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 70.638537] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 74.254209] usb 1-2: reset high-speed USB device number 3 using ehci-pci [ 369.245528] traps: fr24feed[2548] general protection fault ip:ad7f85 sp:7f67f6010210 error:0 in fr24feed[401000+7b2000] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 369.899700] watchdog: watchdog0: watchdog did not stop!


Hardware for Linux and BSD

GitHub