[ 0.000000] Linux version 6.6.32-production+truenas (XXX@XXX) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 14 14:36:03 UTC 2024 [ 0.000000] Command line: BOOT_IMAGE=/ROOT/XXX.XXX.XXX.XXX@/boot/vmlinuz-6.6.32-production+truenas root=ZFS=boot-pool/ROOT/XXX.XXX.XXX.XXX ro libata.allow_tpm=1 amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 intel_iommu=on zfsforce=1 nvme_core.multipath=N [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000010000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bee58fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee59000-0x00000000bef58fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bef59000-0x00000000bf058fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf059000-0x00000000bf158fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf159000-0x00000000bf15cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf15d000-0x00000000bf1dcfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf1dd000-0x00000000bf241fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf272000-0x00000000bf298fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] efi: EFI v2.1 by Dell Inc. [ 0.000000] efi: ACPI 2.0=0xbf15c000 ACPI=0xbf15b000 SMBIOS=0xbf15a000 [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge T310/0PV3YR, BIOS 1.14.0 06/11/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2925.947 MHz processor [ 0.001350] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001355] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001363] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.001368] MTRR map: 7 entries (5 fixed + 2 variable; max 21), built from 8 variable MTRRs [ 0.001371] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002040] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.002049] last_pfn = 0xbf299 max_arch_pfn = 0x400000000 [ 0.012125] found SMP MP-table at [mem 0x000fe710-0x000fe71f] Secure boot disabled [ 0.013009] RAMDISK: [mem 0x2f335000-0x33991fff] ACPI: Early table checksum verification disabled [ 0.013018] ACPI: RSDP 0x00000000BF15C000 000024 (v02 DELL ) [ 0.013023] ACPI: XSDT 0x00000000000F13C0 000094 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013029] ACPI: FACP 0x00000000BF6C3BB4 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.013036] ACPI: DSDT 0x00000000BF6AF000 003EA6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.013040] ACPI: FACS 0x00000000BF6C6000 000040 [ 0.013043] ACPI: FACS 0x00000000BF6C6000 000040 [ 0.013047] ACPI: APIC 0x00000000BF6C3478 000152 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013051] ACPI: SPCR 0x00000000BF6C35CC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013055] ACPI: HPET 0x00000000BF6C3620 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013059] ACPI: DMAR 0x00000000BF6C365C 0000A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013064] ACPI: MCFG 0x00000000BF6C3850 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013068] ACPI: WDAT 0x00000000BF6C3890 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013072] ACPI: SLIC 0x00000000BF6C39C8 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013076] ACPI: ERST 0x00000000BF6B3028 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013080] ACPI: HEST 0x00000000BF6B3298 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013084] ACPI: BERT 0x00000000BF6B2EA8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013088] ACPI: EINJ 0x00000000BF6B2ED8 000150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013092] ACPI: TCPA 0x00000000BF6C3B4C 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.013096] ACPI: SSDT 0x00000000BF6C7000 002784 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.013100] ACPI: Reserving FACP table memory at [mem 0xbf6c3bb4-0xbf6c3ca7] ACPI: Reserving DSDT table memory at [mem 0xbf6af000-0xbf6b2ea5] ACPI: Reserving FACS table memory at [mem 0xbf6c6000-0xbf6c603f] ACPI: Reserving FACS table memory at [mem 0xbf6c6000-0xbf6c603f] ACPI: Reserving APIC table memory at [mem 0xbf6c3478-0xbf6c35c9] ACPI: Reserving SPCR table memory at [mem 0xbf6c35cc-0xbf6c361b] ACPI: Reserving HPET table memory at [mem 0xbf6c3620-0xbf6c3657] ACPI: Reserving DMAR table memory at [mem 0xbf6c365c-0xbf6c3703] ACPI: Reserving MCFG table memory at [mem 0xbf6c3850-0xbf6c388b] ACPI: Reserving WDAT table memory at [mem 0xbf6c3890-0xbf6c39c3] ACPI: Reserving SLIC table memory at [mem 0xbf6c39c8-0xbf6c39eb] ACPI: Reserving ERST table memory at [mem 0xbf6b3028-0xbf6b3297] ACPI: Reserving HEST table memory at [mem 0xbf6b3298-0xbf6b363f] ACPI: Reserving BERT table memory at [mem 0xbf6b2ea8-0xbf6b2ed7] ACPI: Reserving EINJ table memory at [mem 0xbf6b2ed8-0xbf6b3027] ACPI: Reserving TCPA table memory at [mem 0xbf6c3b4c-0xbf6c3baf] ACPI: Reserving SSDT table memory at [mem 0xbf6c7000-0xbf6c9783] No NUMA configuration found [ 0.013179] Faking a node at [mem 0x0000000000000000-0x000000043fffffff] NODE_DATA(0) allocated [mem 0x43ffc8000-0x43fff3fff] cma: Reserved 256 MiB at 0x0000000100000000 on node -1 [ 0.013522] Zone ranges: [ 0.013523] DMA [mem 0x0000000000010000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000043fffffff] Device empty [ 0.013530] Movable zone start for each node [ 0.013533] Early memory node ranges [ 0.013534] node 0: [mem 0x0000000000010000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x00000000bee58fff] node 0: [mem 0x00000000bf059000-0x00000000bf158fff] node 0: [mem 0x00000000bf1dd000-0x00000000bf241fff] node 0: [mem 0x00000000bf272000-0x00000000bf298fff] node 0: [mem 0x0000000100000000-0x000000043fffffff] Initmem setup node 0 [mem 0x0000000000010000-0x000000043fffffff] On node 0, zone DMA: 16 pages in unavailable ranges [ 0.013580] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.022119] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.022127] On node 0, zone DMA32: 132 pages in unavailable ranges [ 0.022129] On node 0, zone DMA32: 48 pages in unavailable ranges [ 0.022569] On node 0, zone Normal: 3431 pages in unavailable ranges [ 0.022717] ACPI: PM-Timer IO Port: 0x808 [ 0.022728] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.022739] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.022742] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.022745] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.022750] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.022751] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.022756] ACPI: SPCR: SPCR table version 1 [ 0.022757] ACPI: SPCR: [Firmware Bug]: Unexpected SPCR Access Width. Defaulting to byte size [ 0.022758] ACPI: SPCR: console: uart,mmio,0x0 [ 0.022760] smpboot: Allowing 32 CPUs, 24 hotplug CPUs [ 0.022778] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x0000ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbee59000-0xbef58fff] PM: hibernation: Registered nosave memory: [mem 0xbef59000-0xbf058fff] PM: hibernation: Registered nosave memory: [mem 0xbf159000-0xbf15cfff] PM: hibernation: Registered nosave memory: [mem 0xbf15d000-0xbf1dcfff] PM: hibernation: Registered nosave memory: [mem 0xbf242000-0xbf271fff] PM: hibernation: Registered nosave memory: [mem 0xbf299000-0xbf698fff] PM: hibernation: Registered nosave memory: [mem 0xbf699000-0xbf6aefff] PM: hibernation: Registered nosave memory: [mem 0xbf6af000-0xbf6cdfff] PM: hibernation: Registered nosave memory: [mem 0xbf6ce000-0xbfffffff] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xffffffff] [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.022801] Booting paravirtualized kernel on bare hardware [ 0.022804] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028789] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.031159] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.031172] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.031176] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.031189] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.031225] Kernel command line: BOOT_IMAGE=/ROOT/XXX.XXX.XXX.XXX@/boot/vmlinuz-6.6.32-production+truenas root=ZFS=boot-pool/ROOT/XXX.XXX.XXX.XXX ro libata.allow_tpm=1 amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 intel_iommu=on zfsforce=1 nvme_core.multipath=N [ 0.031312] AMD-Vi: Unknown option - 'on' [ 0.031397] DMAR: IOMMU enabled [ 0.031444] Unknown kernel command line parameters "BOOT_IMAGE=/ROOT/XXX.XXX.XXX.XXX@/boot/vmlinuz-6.6.32-production+truenas zfsforce=1", will be passed to user space. [ 0.031451] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.031452] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.031453] printk: log_buf_len min size: 131072 bytes [ 0.031801] printk: log_buf_len: 262144 bytes [ 0.031802] printk: early log buf free: 120928(92%) [ 0.034534] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.036102] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.036770] Fallback order for Node 0: 0 [ 0.036776] Built 1 zonelists, mobility grouping on. Total pages: 4124597 [ 0.036778] Policy zone: Normal [ 0.036780] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.036789] software IO TLB: area num 32. [ 0.078702] Memory: 3019972K/16760276K available (16384K kernel code, 2367K rwdata, 10488K rodata, 3968K init, 3640K bss, 579968K reserved, 262144K cma-reserved) [ 0.087790] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.087911] Kernel/User page tables isolation: enabled [ 0.088007] ftrace: allocating 42955 entries in 168 pages [ 0.095655] ftrace: allocated 168 pages with 3 groups [ 0.096385] Dynamic Preempt: voluntary [ 0.096686] rcu: Preemptible hierarchical RCU implementation. [ 0.096687] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 0.096688] Trampoline variant of Tasks RCU enabled. [ 0.096689] Rude variant of Tasks RCU enabled. [ 0.096690] Tracing variant of Tasks RCU enabled. [ 0.096690] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.096691] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.100877] NR_IRQS: 524544, nr_irqs: 680, preallocated irqs: 16 [ 0.101106] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.101259] Console: colour dummy device 80x25 [ 0.101262] printk: console [tty0] enabled [ 0.101953] ACPI: Core revision 20230628 [ 0.102117] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.102135] APIC: Switch to symmetric I/O mode setup [ 0.102140] DMAR: Host address width 36 [ 0.102143] DMAR: DRHD base: 0x000000fed50000 flags: 0x1 [ 0.102152] DMAR: dmar0: reg_base_addr fed50000 ver 1:0 cap c90780106b0462 ecap f020e2 [ 0.102158] DMAR: RMRR base: 0x000000bf7c8000 end: 0x000000bf7dffff [ 0.102162] DMAR: RMRR base: 0x000000bf7c0000 end: 0x000000bf7c0fff [ 0.102166] DMAR: RMRR base: 0x000000bf7c2000 end: 0x000000bf7c2fff [ 0.102176] APIC: Switched APIC routing to: physical flat [ 0.102573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122136] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a2d02613b8, max_idle_ns: 440795332857 ns [ 0.122147] Calibrating delay loop (skipped), value calculated using timer frequency.. 5851.89 BogoMIPS (lpj=11703788) [ 0.122173] CPU0: Thermal monitoring enabled (TM1) [ 0.122192] process: using mwait in idle threads [ 0.122198] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.122202] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.122208] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.122214] Spectre V2 : Mitigation: Retpolines [ 0.122217] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.122222] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.122225] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.122230] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.122235] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.122239] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.122245] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.122248] MMIO Stale Data: Unknown: No mitigations [ 0.122253] x86/fpu: x87 FPU will use FXSAVE [ 0.141134] Freeing SMP alternatives memory: 36K [ 0.141145] pid_max: default: 32768 minimum: 301 [ 0.146970] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.147201] landlock: Up and running. [ 0.147203] Yama: becoming mindful. [ 0.147227] AppArmor: AppArmor initialized [ 0.147231] TOMOYO Linux initialized [ 0.147238] LSM support for eBPF active [ 0.147536] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.147565] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.256395] smpboot: CPU0: Intel(R) Xeon(R) CPU X3470 @ 2.93GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.256613] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. [ 0.256639] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. [ 0.256668] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. [ 0.256690] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.256714] core: CPU erratum AAJ80 worked around [ 0.256716] core: CPUID marked event: 'bus cycles' unavailable [ 0.256719] ... version: 3 [ 0.256721] ... bit width: 48 [ 0.256723] ... generic registers: 4 [ 0.256725] ... value mask: 0000ffffffffffff [ 0.256728] ... max period: 000000007fffffff [ 0.256730] ... fixed-purpose events: 3 [ 0.256733] ... event mask: 000000070000000f [ 0.256864] signal: max sigframe size: 1440 [ 0.256887] Estimated ratio of average max frequency by base frequency (times 1024): 1117 [ 0.256927] rcu: Hierarchical SRCU implementation. [ 0.256931] rcu: Max phase no-delay instances is 1000. [ 0.258143] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.258143] smp: Bringing up secondary CPUs ... [ 0.258143] smpboot: x86: Booting SMP configuration: [ 0.258143] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.276145] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.282190] smp: Brought up 1 node, 8 CPUs [ 0.282190] smpboot: Max logical packages: 4 [ 0.282190] smpboot: Total of 8 processors activated (46815.15 BogoMIPS) [ 0.335972] node 0 deferred pages initialised in 48ms [ 0.338869] devtmpfs: initialized [ 0.338869] x86/mm: Memory block size: 128MB [ 0.339921] ACPI: PM: Registering ACPI NVS region [mem 0xbf159000-0xbf15cfff] (16384 bytes) [ 0.339921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.339921] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.342260] pinctrl core: initialized pinctrl subsystem [ 0.343219] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.343421] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.343421] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.343421] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.343421] thermal_sys: Registered thermal governor 'fair_share' [ 0.343421] thermal_sys: Registered thermal governor 'bang_bang' [ 0.343421] thermal_sys: Registered thermal governor 'step_wise' [ 0.343421] thermal_sys: Registered thermal governor 'user_space' [ 0.343421] thermal_sys: Registered thermal governor 'power_allocator' [ 0.343421] cpuidle: using governor ladder [ 0.343421] cpuidle: using governor menu [ 0.343421] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.343421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.343421] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.343421] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.343421] PCI: Using configuration type 1 for base access [ 0.343421] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.343421] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.343421] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.343421] ACPI: Added _OSI(Module Device) [ 0.343421] ACPI: Added _OSI(Processor Device) [ 0.343421] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.343421] ACPI: Added _OSI(Processor Aggregator Device) [ 0.346170] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.346475] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.347253] ACPI: _OSC evaluated successfully for all CPUs [ 0.347348] ACPI: Interpreter enabled [ 0.347364] ACPI: PM: (supports S0 S4 S5) [ 0.347368] ACPI: Using IOAPIC for interrupt routing [ 0.347512] HEST: Table parsing has been initialized. [ 0.347701] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.347710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.347717] PCI: Using E820 reservations for host bridge windows [ 0.347901] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.354246] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.354258] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.354857] PCI host bridge to bus 0000:00 [ 0.354864] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:d130] type 00 class 0x060000 [ 0.354979] pci 0000:00:00.0: enabling Extended Tags [ 0.355018] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.355127] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.355157] pci 0000:00:03.0: enabling Extended Tags [ 0.355198] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.355338] pci 0000:00:05.0: [8086:d13a] type 01 class 0x060400 [ 0.355369] pci 0000:00:05.0: enabling Extended Tags [ 0.355409] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.355541] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.355682] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.355821] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.355924] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.356017] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.356096] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.356199] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.356219] pci 0000:00:1a.0: reg 0x10: [mem 0xdf0fc000-0xdf0fc3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.356415] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.356496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.356521] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.356526] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.356646] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.356728] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.356752] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.356757] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.356870] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.356952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.356976] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.356981] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.357091] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.357172] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.357196] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.357201] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.357322] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.357342] pci 0000:00:1d.0: reg 0x10: [mem 0xdf0fe000-0xdf0fe3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.357543] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.357689] pci 0000:00:1f.0: [8086:3b14] type 00 class 0x060100 [ 0.357900] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f [ 0.357917] pci 0000:00:1f.2: reg 0x10: [io 0xfca0-0xfca7] pci 0000:00:1f.2: reg 0x14: [io 0xfc90-0xfc93] pci 0000:00:1f.2: reg 0x18: [io 0xfca8-0xfcaf] pci 0000:00:1f.2: reg 0x1c: [io 0xfc94-0xfc97] pci 0000:00:1f.2: reg 0x20: [io 0xfcc0-0xfccf] pci 0000:00:1f.2: reg 0x24: [io 0xfcd0-0xfcdf] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185 [ 0.358083] pci 0000:00:1f.5: reg 0x10: [io 0xfcb0-0xfcb7] pci 0000:00:1f.5: reg 0x14: [io 0xfc98-0xfc9b] pci 0000:00:1f.5: reg 0x18: [io 0xfcb8-0xfcbf] pci 0000:00:1f.5: reg 0x1c: [io 0xfc9c-0xfc9f] pci 0000:00:1f.5: reg 0x20: [io 0xfce0-0xfcef] pci 0000:00:1f.5: reg 0x24: [io 0xfcf0-0xfcff] pci 0000:00:03.0: PCI bridge to [bus 04] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.358401] pci 0000:02:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.358622] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link) [ 0.358744] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.358774] pci 0000:02:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.359101] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd9ffffff] pci 0000:00:1c.2: PCI bridge to [bus 06] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:05:00.0: [14e4:1639] type 00 class 0x020000 [ 0.359311] pci 0000:05:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.359629] pci 0000:05:00.1: [14e4:1639] type 00 class 0x020000 [ 0.359658] pci 0000:05:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold [ 0.359976] pci 0000:00:1c.4: PCI bridge to [bus 05] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xddffffff] pci_bus 0000:01: extended config space not accessible [ 0.360045] pci 0000:01:03.0: [102b:0532] type 00 class 0x030000 [ 0.360065] pci 0000:01:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref] pci 0000:01:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff] pci 0000:01:03.0: reg 0x18: [mem 0xde800000-0xdeffffff] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:03.0: BAR 0: assigned to efifb [ 0.360152] pci 0000:01:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.360266] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.360289] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.360296] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.360303] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff window] (subtractive decode) [ 0.360310] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.361463] ACPI: PCI: Interrupt link LK00 configured for IRQ 15 [ 0.361547] ACPI: PCI: Interrupt link LK01 configured for IRQ 5 [ 0.361631] ACPI: PCI: Interrupt link LK02 configured for IRQ 0 [ 0.361636] ACPI: PCI: Interrupt link LK02 disabled [ 0.361716] ACPI: PCI: Interrupt link LK03 configured for IRQ 6 [ 0.361798] ACPI: PCI: Interrupt link LK04 configured for IRQ 11 [ 0.361880] ACPI: PCI: Interrupt link LK05 configured for IRQ 10 [ 0.361962] ACPI: PCI: Interrupt link LK06 configured for IRQ 14 [ 0.362046] ACPI: PCI: Interrupt link LK07 configured for IRQ 0 [ 0.362051] ACPI: PCI: Interrupt link LK07 disabled [ 0.362239] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.362367] pps_core: LinuxPPS API ver. 1 registered [ 0.362372] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.362381] PTP clock support registered [ 0.362397] EDAC MC: Ver: 3.0.0 [ 0.362486] efivars: Registered efivars operations [ 0.362486] NetLabel: Initializing [ 0.362486] NetLabel: domain hash size = 128 [ 0.362486] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.362490] NetLabel: unlabeled traffic allowed by default [ 0.362494] PCI: Using ACPI for IRQ routing [ 0.368927] PCI: Discovered peer bus ff [ 0.368932] PCI: root bus ff: using default resources [ 0.368934] PCI: Probing PCI hardware (bus ff) [ 0.368964] PCI host bridge to bus 0000:ff [ 0.368969] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.369001] pci 0000:ff:00.0: [8086:2c50] type 00 class 0x060000 [ 0.369066] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000 [ 0.369127] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000 [ 0.369185] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000 [ 0.369244] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000 [ 0.369304] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000 [ 0.369365] pci 0000:ff:03.2: [8086:2c9a] type 00 class 0x060000 [ 0.369423] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.369481] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.369541] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.369598] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.369654] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.369713] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.369773] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.369833] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000 [ 0.369890] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000 [ 0.369956] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.369963] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.369977] PCI: pci_cache_line_size set to 64 bytes [ 0.370038] e820: reserve RAM buffer [mem 0xbee59000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf159000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf242000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf299000-0xbfffffff] pci 0000:01:03.0: vgaarb: setting as boot VGA device [ 0.370182] pci 0000:01:03.0: vgaarb: bridge control possible [ 0.370182] pci 0000:01:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.370182] vgaarb: loaded [ 0.372152] hpet: 8 channels of 5 reserved for per-cpu timers [ 0.372160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 28 [ 0.372169] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.374200] clocksource: Switched to clocksource tsc-early [ 0.375117] VFS: Disk quotas dquot_6.6.0 [ 0.375220] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.375503] AppArmor: AppArmor Filesystem Enabled [ 0.375536] pnp: PnP ACPI init [ 0.375905] system 00:02: [io 0x0800-0x087f] could not be reserved [ 0.375912] system 00:02: [io 0x0880-0x08ff] has been reserved [ 0.375916] system 00:02: [io 0x0900-0x091f] has been reserved [ 0.375919] system 00:02: [io 0x0920-0x0923] has been reserved [ 0.375922] system 00:02: [io 0x0924] has been reserved [ 0.375926] system 00:02: [io 0x0ca0-0x0ca7] has been reserved [ 0.375929] system 00:02: [io 0x0ca9-0x0cab] has been reserved [ 0.375932] system 00:02: [io 0x0cad-0x0caf] has been reserved [ 0.376011] system 00:03: [io 0x0ca8] has been reserved [ 0.376016] system 00:03: [io 0x0cac] has been reserved [ 0.377053] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.377119] system 00:07: [mem 0xfed50000-0xfed51fff] could not be reserved [ 0.377267] pnp: PnP ACPI: found 8 devices [ 0.383188] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.383438] NET: Registered PF_INET protocol family [ 0.383674] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.387570] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.387609] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.387617] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.387902] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.388398] TCP: Hash tables configured (established 131072 bind 65536) [ 0.388603] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.388664] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.388762] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.388992] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.389004] NET: Registered PF_XDP protocol family [ 0.389022] pci 0000:00:03.0: PCI bridge to [bus 04] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd9ffffff] pci 0000:00:1c.2: PCI bridge to [bus 06] pci 0000:00:1c.3: PCI bridge to [bus 07] pci 0000:00:1c.4: PCI bridge to [bus 05] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xddffffff] pci 0000:00:1e.0: PCI bridge to [bus 01] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff window] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd9ffffff] pci_bus 0000:05: resource 1 [mem 0xda000000-0xddffffff] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdeffffff] pci_bus 0000:01: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xfdffffff window] pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff window] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] PCI: CLS 64 bytes, default 64 [ 0.389942] DMAR: No ATSR found [ 0.389946] DMAR: No SATC found [ 0.389953] DMAR: dmar0: Using Queued invalidation [ 0.390009] Trying to unpack rootfs image as initramfs... [ 0.390070] pci 0000:00:00.0: Adding to iommu group 0 [ 0.390097] pci 0000:00:03.0: Adding to iommu group 1 [ 0.390120] pci 0000:00:05.0: Adding to iommu group 2 [ 0.390181] pci 0000:00:08.0: Adding to iommu group 3 [ 0.390208] pci 0000:00:08.1: Adding to iommu group 4 [ 0.390252] pci 0000:00:08.2: Adding to iommu group 5 [ 0.390287] pci 0000:00:08.3: Adding to iommu group 6 [ 0.390326] pci 0000:00:10.0: Adding to iommu group 7 [ 0.390348] pci 0000:00:10.1: Adding to iommu group 7 [ 0.390376] pci 0000:00:1a.0: Adding to iommu group 8 [ 0.390400] pci 0000:00:1c.0: Adding to iommu group 9 [ 0.390422] pci 0000:00:1c.2: Adding to iommu group 10 [ 0.390450] pci 0000:00:1c.3: Adding to iommu group 11 [ 0.390474] pci 0000:00:1c.4: Adding to iommu group 12 [ 0.390497] pci 0000:00:1d.0: Adding to iommu group 13 [ 0.390520] pci 0000:00:1e.0: Adding to iommu group 14 [ 0.390571] pci 0000:00:1f.0: Adding to iommu group 15 [ 0.390596] pci 0000:00:1f.2: Adding to iommu group 15 [ 0.390618] pci 0000:00:1f.5: Adding to iommu group 15 [ 0.390657] pci 0000:02:00.0: Adding to iommu group 16 [ 0.390682] pci 0000:02:00.1: Adding to iommu group 16 [ 0.390726] pci 0000:05:00.0: Adding to iommu group 17 [ 0.390752] pci 0000:05:00.1: Adding to iommu group 17 [ 0.390763] pci 0000:01:03.0: Adding to iommu group 14 [ 0.390806] pci 0000:ff:00.0: Adding to iommu group 18 [ 0.390831] pci 0000:ff:00.1: Adding to iommu group 18 [ 0.390874] pci 0000:ff:02.0: Adding to iommu group 19 [ 0.390900] pci 0000:ff:02.1: Adding to iommu group 19 [ 0.390955] pci 0000:ff:03.0: Adding to iommu group 20 [ 0.390981] pci 0000:ff:03.1: Adding to iommu group 20 [ 0.391007] pci 0000:ff:03.2: Adding to iommu group 20 [ 0.391038] pci 0000:ff:03.4: Adding to iommu group 20 [ 0.391094] pci 0000:ff:04.0: Adding to iommu group 21 [ 0.391121] pci 0000:ff:04.1: Adding to iommu group 21 [ 0.391148] pci 0000:ff:04.2: Adding to iommu group 21 [ 0.391174] pci 0000:ff:04.3: Adding to iommu group 21 [ 0.391235] pci 0000:ff:05.0: Adding to iommu group 22 [ 0.391265] pci 0000:ff:05.1: Adding to iommu group 22 [ 0.391292] pci 0000:ff:05.2: Adding to iommu group 22 [ 0.391318] pci 0000:ff:05.3: Adding to iommu group 22 [ 0.391405] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.391411] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.391416] software IO TLB: mapped [mem 0x00000000b8a91000-0x00000000bca91000] (64MB) [ 0.392431] Initialise system trusted keyrings [ 0.392454] Key type blacklist registered [ 0.392523] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.392535] zbud: loaded [ 0.393018] fuse: init (API version 7.39) [ 0.393430] integrity: Platform Keyring initialized [ 0.393441] integrity: Machine keyring initialized [ 0.411978] Key type asymmetric registered [ 0.411990] Asymmetric key parser 'x509' registered [ 1.069266] Freeing initrd memory: 72052K [ 1.074658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.074709] io scheduler mq-deadline registered [ 1.076018] pcieport 0000:00:03.0: PME: Signaling with IRQ 30 [ 1.076074] pcieport 0000:00:03.0: AER: enabled with IRQ 30 [ 1.076348] pcieport 0000:00:05.0: PME: Signaling with IRQ 31 [ 1.076406] pcieport 0000:00:05.0: AER: enabled with IRQ 31 [ 1.076536] pcieport 0000:00:1c.0: PME: Signaling with IRQ 32 [ 1.076645] pcieport 0000:00:1c.2: PME: Signaling with IRQ 33 [ 1.076760] pcieport 0000:00:1c.3: PME: Signaling with IRQ 34 [ 1.076877] pcieport 0000:00:1c.4: PME: Signaling with IRQ 35 [ 1.076981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.077988] ERST: Error Record Serialization Table (ERST) support is initialized. [ 1.078002] pstore: Using crash dump compression: deflate [ 1.078005] pstore: Registered erst as persistent store backend [ 1.078146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.079087] Linux agpgart interface v0.103 [ 1.090354] tpm_tis 00:05: 1.2 TPM (device-id 0x4A10, rev-id 78) [ 1.130301] random: crng init done [ 1.130417] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.131050] i8042: PNP: No PS/2 controller found. [ 1.131147] mousedev: PS/2 mouse device common for all mice [ 1.131170] rtc_cmos 00:01: RTC can wake from S4 [ 1.131446] rtc_cmos 00:01: registered as rtc0 [ 1.131481] rtc_cmos 00:01: setting system clock to 2024-09-22T12:53:12 UTC (1727009592) [ 1.131508] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.131701] intel_pstate: CPU model not supported [ 1.131928] ledtrig-cpu: registered to indicate activity on CPUs [ 1.132172] efifb: probing for efifb [ 1.132183] efifb: framebuffer at 0xd5800000, using 1216k, total 1216k [ 1.132187] efifb: mode is 640x480x32, linelength=2560, pages=1 [ 1.132190] efifb: scrolling: redraw [ 1.132192] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.144557] Console: switching to colour frame buffer device 80x30 [ 1.157434] fb0: EFI VGA frame buffer device [ 1.171302] NET: Registered PF_INET6 protocol family [ 1.177991] Segment Routing with IPv6 [ 1.178210] In-situ OAM (IOAM) with IPv6 [ 1.178454] mip6: Mobile IPv6 [ 1.186497] NET: Registered PF_PACKET protocol family [ 1.194681] mpls_gso: MPLS GSO support [ 1.204755] microcode: Microcode Update Driver: v2.2. [ 1.204766] IPI shorthand broadcast: enabled [ 1.221839] sched_clock: Marking stable (1220002443, 1007513)->(1225529777, -4519821) [ 1.238062] registered taskstats version 1 [ 1.246191] Loading compiled-in X.509 certificates [ 1.280127] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.295894] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.305945] Key type .fscrypt registered [ 1.314073] Key type fscrypt-provisioning registered [ 1.327879] Key type encrypted registered [ 1.336041] AppArmor: AppArmor sha1 policy hashing enabled [ 1.344459] ima: Allocated hash algorithm: sha256 [ 1.397153] ima: No architecture policies found [ 1.405093] evm: Initialising EVM extended attributes: [ 1.412952] evm: security.selinux [ 1.413095] CE: hpet4 increased min_delta_ns to 20115 nsec [ 1.421075] tsc: Refined TSC clocksource calibration: 2925.978 MHz [ 1.428495] evm: security.SMACK64 (disabled) [ 1.428496] evm: security.SMACK64EXEC (disabled) [ 1.428497] evm: security.SMACK64TRANSMUTE (disabled) [ 1.428497] evm: security.SMACK64MMAP (disabled) [ 1.436377] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2d1f7a08c, max_idle_ns: 440795222358 ns [ 1.444087] evm: security.apparmor [ 1.488705] evm: security.ima [ 1.496117] evm: security.capability [ 1.503501] evm: HMAC attrs: 0x1 [ 1.510554] clocksource: Switched to clocksource tsc [ 1.517078] CE: hpet3 increased min_delta_ns to 20115 nsec [ 1.700812] RAS: Correctable Errors collector initialized. [ 1.708229] clk: Disabling unused clocks [ 1.716970] Freeing unused decrypted memory: 2028K [ 1.724746] Freeing unused kernel image (initmem) memory: 3968K [ 1.732140] Write protecting the kernel read-only data: 28672k [ 1.740066] Freeing unused kernel image (rodata/data gap) memory: 1800K [ 1.805775] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.813066] x86/mm: Checking user space page tables [ 1.875780] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.882954] Run /init as init process [ 1.889855] with arguments: [ 1.889856] /init [ 1.889857] with environment: [ 1.889858] HOME=/ [ 1.889859] TERM=linux [ 1.889860] BOOT_IMAGE=/ROOT/XXX.XXX.XXX.XXX@/boot/vmlinuz-6.6.32-production+truenas [ 1.889861] zfsforce=1 [ 2.088506] fjes: module verification failed: signature and/or required key missing - tainting kernel [ 2.107371] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 16, node addr 59B7800C97C0E9B00C20004FEF6A9E21 [ 2.123534] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 17, node addr 20767095C884456B73421D76F07D2D32 [ 2.139709] SCSI subsystem initialized [ 2.140302] bnx2 0000:05:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 48D6F1F55EA2F2397135BC42222E41C0 [ 2.166069] bnx2 0000:05:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 3F838934943E68AAEB7A4327235B94C1 [ 2.181262] CE: hpet increased min_delta_ns to 20115 nsec [ 2.181367] CE: hpet increased min_delta_ns to 30172 nsec [ 2.225527] ACPI: bus type USB registered [ 2.234587] usbcore: registered new interface driver usbfs [ 2.243667] usbcore: registered new interface driver hub [ 2.252685] usbcore: registered new device driver usb [ 2.262298] libata version 3.00 loaded. [ 2.263817] ata_piix 0000:00:1f.2: version 2.13 [ 2.264032] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.273152] scsi host0: ata_piix [ 2.281314] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.290160] scsi host1: ata_piix [ 2.307560] ehci-pci 0000:00:1a.0: debug port 2 [ 2.316310] ata1: SATA max UDMA/133 cmd 0xfca0 ctl 0xfc90 bmdma 0xfcc0 irq 20 [ 2.328926] ehci-pci 0000:00:1a.0: irq 22, io mem 0xdf0fc000 [ 2.333650] ata2: SATA max UDMA/133 cmd 0xfca8 ctl 0xfc94 bmdma 0xfcc8 irq 20 [ 2.333958] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] bnx2 0000:02:00.1 eno2: renamed from eth1 [ 2.361194] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.378143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.395694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.413121] usb usb1: Product: EHCI Host Controller [ 2.421619] usb usb1: Manufacturer: Linux 6.6.32-production+truenas ehci_hcd [ 2.430143] usb usb1: SerialNumber: ... [ 2.439021] hub 1-0:1.0: USB hub found [ 2.447456] hub 1-0:1.0: 2 ports detected [ 2.455833] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.463952] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.479339] ehci-pci 0000:00:1d.0: debug port 2 [ 2.491323] ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf0fe000 [ 2.493252] bnx2 0000:05:00.0 enp5s0f0: renamed from eth2 [ 2.513320] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 2.517402] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.533841] scsi host2: ata_piix [ 2.539004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.548696] scsi host3: ata_piix [ 2.564325] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.572876] ata3: SATA max UDMA/133 cmd 0xfcb0 ctl 0xfc98 bmdma 0xfce0 irq 21 [ 2.590212] usb usb2: Product: EHCI Host Controller [ 2.590215] usb usb2: Manufacturer: Linux 6.6.32-production+truenas ehci_hcd [ 2.599184] ata4: SATA max UDMA/133 cmd 0xfcb8 ctl 0xfc9c bmdma 0xfce8 irq 21 [ 2.608043] usb usb2: SerialNumber: ... [ 2.608279] hub 2-0:1.0: USB hub found [ 2.643873] hub 2-0:1.0: 2 ports detected [ 2.653236] bnx2 0000:02:00.0 eno1: renamed from eth0 [ 2.717303] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.741336] bnx2 0000:05:00.1 enp5s0f1: renamed from eth3 [ 2.789205] ata4.00: ATA-10: TEAM T253X2128G, U0729A0, max UDMA/133 [ 2.797735] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.881971] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 2.899165] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.905198] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.908740] hub 1-1:1.0: USB hub found [ 2.926339] hub 1-1:1.0: 6 ports detected [ 3.074010] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.092091] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.101839] hub 2-1:1.0: USB hub found [ 3.110924] hub 2-1:1.0: 8 ports detected [ 3.133317] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.143188] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.152995] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.162172] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.174307] ata2.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 3.183425] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.192520] ata1.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 3.201469] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.210310] ata2.01: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 3.219118] ata2.01: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.221125] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 3.227987] ata1.01: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 3.245166] ata1.01: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.257544] ata1.00: configured for UDMA/133 [ 3.265954] ata2.00: configured for UDMA/133 [ 3.276647] ata1.01: configured for UDMA/133 [ 3.284450] ata2.01: configured for UDMA/133 [ 3.284678] scsi 0:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 3.307215] scsi 0:0:1:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 3.322599] scsi 1:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 3.337685] scsi 1:0:1:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 3.350091] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 3.353412] scsi 3:0:0:0: Direct-Access ATA TEAM T253X2128G 9A0 PQ: 0 ANSI: 5 [ 3.368337] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.368875] hub 1-1.1:1.0: USB hub found [ 3.408343] hub 1-1.1:1.0: 2 ports detected [ 3.409088] usb 2-1.4: new full-speed USB device number 3 using ehci-pci [ 3.482699] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 3.482721] sd 0:0:1:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 3.482775] sd 1:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 3.482778] sd 1:0:0:0: [sdc] 4096-byte physical blocks [ 3.482793] sd 1:0:0:0: [sdc] Write Protect is off [ 3.482795] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.482796] sd 3:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.482811] sd 3:0:0:0: [sde] Write Protect is off [ 3.482813] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.482820] sd 1:0:1:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 3.482823] sd 1:0:1:0: [sdd] 4096-byte physical blocks [ 3.482829] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.482840] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.482873] sd 3:0:0:0: [sde] Preferred minimum I/O size 512 bytes [ 3.482877] sd 1:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 3.482895] sd 1:0:1:0: [sdd] Write Protect is off [ 3.482897] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.482914] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.482930] sd 1:0:1:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.486946] sde: sde1 sde2 sde3 sde4 [ 3.487110] sd 3:0:0:0: [sde] Attached SCSI disk [ 3.499725] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.517221] sd 0:0:1:0: [sdb] 4096-byte physical blocks [ 3.536775] usb 2-1.4: New USB device found, idVendor=0925, idProduct=1241, bcdDevice= 0.02 [ 3.541128] sd 0:0:0:0: [sda] Write Protect is off [ 3.541130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.541171] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.541204] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 3.587442] sdc: sdc1 sdc2 [ 3.598095] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.598097] usb 2-1.4: Product: NHS USB [ 3.598098] usb 2-1.4: Manufacturer: NHS Sistemas de Energia [ 3.598143] sdd: sdd1 sdd2 [ 3.608085] sd 0:0:1:0: [sdb] Write Protect is off [ 3.608098] sd 1:0:0:0: [sdc] Attached SCSI disk [ 3.608483] sda: sda1 sda2 [ 3.608634] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.626809] sd 1:0:1:0: [sdd] Attached SCSI disk [ 3.645324] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.645347] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.893785] sd 0:0:1:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.956949] sdb: sdb1 sdb2 [ 3.965123] sd 0:0:1:0: [sdb] Attached SCSI disk [ 4.162293] block device autoloading is deprecated and will be removed. [ 4.176260] md/raid1:md127: active with 2 out of 2 mirrors [ 4.180380] block device autoloading is deprecated and will be removed. [ 4.184264] md127: detected capacity change from 0 to 4188160 [ 4.207902] md/raid1:md126: active with 2 out of 2 mirrors [ 4.215957] md126: detected capacity change from 0 to 4188160 [ 4.589149] raid6: sse2x4 gen() 10540 MB/s [ 4.673011] raid6: sse2x2 gen() 11335 MB/s [ 4.749114] raid6: sse2x1 gen() 9152 MB/s [ 4.757111] raid6: using algorithm sse2x2 gen() 11335 MB/s [ 4.833010] raid6: .... xor() 6914 MB/s, rmw enabled [ 4.841566] raid6: using ssse3x2 recovery algorithm [ 4.850772] xor: measuring software checksum speed [ 4.859718] prefetch64-sse : 15602 MB/sec [ 4.868744] generic_sse : 13358 MB/sec [ 4.876387] xor: using function: prefetch64-sse (15602 MB/sec) [ 4.884787] async_tx: api initialized (async) [ 4.977358] spl: loading out-of-tree module taints kernel. [ 5.018962] zfs: module license 'CDDL' taints kernel. [ 5.027025] Disabling lock debugging due to kernel taint [ 5.035449] zfs: module license taints kernel. [ 7.490233] ZFS: Loaded module v2.2.4-1, ZFS pool version 5000, ZFS filesystem version 5 [ 9.296440] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.684690] ERST: NVRAM ERST Log Address Range not implemented yet. [ 11.398108] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 11.398146] device-mapper: uevent: version 1.0.3 [ 11.398243] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 11.558438] pstore: backend 'erst' already in use: ignoring 'efi_pstore' [ 11.603256] ACPI: bus type drm_connector registered [ 11.650676] loop: module loaded [ 12.530971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 12.549342] ACPI Error: No handler for Region [IPMI] (0000000049d48299) [IPMI] (20230628/evregion-130) [ 12.565146] ACPI: button: Power Button [PWRF] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) [ 12.597815] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) [ 12.618183] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) [ 12.620293] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.639277] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST [ 12.648020] CE: hpet7 increased min_delta_ns to 20115 nsec [ 12.648189] CE: hpet7 increased min_delta_ns to 30172 nsec [ 12.669091] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 12.669140] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 12.699056] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 12.700560] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT) [ 12.708948] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 12.738064] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 12.757666] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 12.773255] IPMI message handler: version 39.2 [ 12.773389] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 12.801435] cdc_acm 2-1.4:1.0: ttyACM0: USB ACM device [ 12.811357] usbcore: registered new interface driver cdc_acm [ 12.821175] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 12.841633] ipmi device interface [ 12.885096] ipmi_si: IPMI System Interface driver [ 12.885126] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 12.885129] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ 12.885133] ipmi_si: Adding SMBIOS-specified kcs state machine [ 12.885202] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 12.905697] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 12.991011] Error: Driver 'pcspkr' is already registered, aborting... [ 13.010080] Console: switching to colour dummy device 80x25 [ 13.010357] mgag200 0000:01:03.0: vgaarb: deactivate vga console [ 13.013567] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:03.0 on minor 0 [ 13.015339] fbcon: mgag200drmfb (fb0) is primary device [ 13.209495] kvm_intel: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 13.227208] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 13.282464] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized [ 13.284196] ipmi_ssif: IPMI SSIF Interface driver [ 13.381552] Console: switching to colour frame buffer device 128x48 [ 13.429283] mgag200 0000:01:03.0: [drm] fb0: mgag200drmfb frame buffer device [ 13.665109] CE: hpet6 increased min_delta_ns to 20115 nsec [ 28.841363] CE: hpet increased min_delta_ns to 45258 nsec [ 40.383661] Adding 2094076k swap on /dev/mapper/XXXXXX Priority:-2 extents:1 across:2094076k [ 41.040408] Adding 2094076k swap on /dev/mapper/XXXXXX Priority:-3 extents:1 across:2094076k [ 59.195025] dca service started, version 1.12.1 [ 59.199488] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 59.204967] NTB Resource Split driver, version 1 [ 59.208061] Software Queue-Pair Transport over NTB, version 4 [ 59.265466] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 60.405997] bnx2 0000:02:00.1 eno2: using MSIX [ 60.641979] bnx2 0000:02:00.0 eno1: using MSIX [ 60.798012] bnx2 0000:05:00.0 enp5s0f0: using MSIX [ 60.969910] bnx2 0000:05:00.1 enp5s0f1: using MSIX [ 63.688009] bnx2 0000:02:00.0 eno1: NIC Copper Link is Up, 1000 Mbps full duplex [ 63.688728] , receive & transmit flow control ON [ 65.762786] Adding 2094076k swap on /dev/mapper/XXXXXX Priority:-2 extents:1 across:2094076k [ 65.984429] Adding 2094076k swap on /dev/mapper/XXXXXX Priority:-3 extents:1 across:2094076k [ 72.257176] RPC: Registered named UNIX socket transport module. [ 72.258509] RPC: Registered udp transport module. [ 72.259568] RPC: Registered tcp transport module. [ 72.260604] RPC: Registered tcp-with-tls transport module. [ 72.261481] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 72.432336] CE: hpet7 increased min_delta_ns to 45258 nsec [ 73.406773] CE: hpet6 increased min_delta_ns to 30172 nsec [ 545.092413] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 1796.312576] perf: interrupt took too long (3177 > 3128), lowering kernel.perf_event_max_sample_rate to 62750 [ 2908.467847] bnx2 0000:02:00.0 eno1: NIC Copper Link is Down [ 2910.860403] bnx2 0000:02:00.0 eno1: NIC Copper Link is Up, 1000 Mbps full duplex [ 2910.860436] , receive & transmit flow control ON [26138.721436] perf: interrupt took too long (4022 > 3971), lowering kernel.perf_event_max_sample_rate to 49500 [50813.781629] Non-volatile memory driver v1.3 [50813.996742] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [110068.573756] usb 2-1.4: USB disconnect, device number 3 [110135.475580] usb 2-1.4: new full-speed USB device number 4 using ehci-pci [110135.587023] usb 2-1.4: New USB device found, idVendor=0925, idProduct=1241, bcdDevice= 0.02 [110135.587094] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [110135.587134] usb 2-1.4: Product: NHS USB [110135.587148] usb 2-1.4: Manufacturer: NHS Sistemas de Energia [110135.591923] cdc_acm 2-1.4:1.0: ttyACM1: USB ACM device [214883.669849] loop0: detected capacity change from 0 to 2579376 [214883.694545] squashfs: version 4.0 (2009/01/31) Phillip Lougher [545984.578894] perf: interrupt took too long (6232 > 5027), lowering kernel.perf_event_max_sample_rate to 32000 [1128411.288981] loop0: detected capacity change from 0 to 2579376 [1595185.331126] loop0: detected capacity change from 0 to 2579376 [1598363.006101] loop0: detected capacity change from 0 to 2579376 [1598534.823442] loop0: detected capacity change from 0 to 2579280