[ 24.211817] Linux version 6.12.41+deb13-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.41-1 (2025-08-12) [ 24.211867] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.41+deb13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 24.211892] BIOS-provided physical RAM map: [ 24.211914] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 24.211934] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 24.211955] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 24.211980] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 24.212120] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 24.212145] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 24.212166] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 24.212193] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 24.212214] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 24.212234] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 24.212254] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 24.212278] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 24.212298] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 24.212318] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 24.212338] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 24.212357] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 24.212378] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 24.212397] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 24.212422] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 24.212443] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 24.212463] NX (Execute Disable) protection: active [ 24.212483] APIC: Static calls initialized [ 24.212502] SMBIOS 2.7 present. [ 24.212523] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 24.212542] DMI: Memory slots populated: 4/4 [ 24.212563] tsc: Fast TSC calibration using PIT [ 24.212584] tsc: Detected 3093.297 MHz processor [ 24.212603] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 24.212625] e820: remove [mem 0x000a0000-0x000fffff] usable [ 24.212647] AGP: No AGP bridge found [ 24.212668] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 24.212695] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 24.212717] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 24.212739] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 24.212760] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 24.212781] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 24.212831] RAMDISK: [mem 0x281d7000-0x300e2fff] ACPI: Early table checksum verification disabled [ 24.212874] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 24.212895] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 24.212918] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 24.212943] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 24.212966] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 24.212987] ACPI: FACS 0x00000000BE8CF080 000040 [ 24.213008] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 24.213030] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 24.213052] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 24.213073] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 24.213094] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 24.213121] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 24.213142] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 24.213163] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 24.213403] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] Zone ranges: [ 24.213467] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 24.213556] Movable zone start for each node [ 24.213577] Early memory node ranges [ 24.213598] node 0: [mem 0x0000000000001000-0x0000000000099fff] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 24.213770] On node 0, zone DMA: 102 pages in unavailable ranges [ 24.213791] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 24.213813] On node 0, zone DMA32: 518 pages in unavailable ranges [ 24.213835] On node 0, zone DMA32: 929 pages in unavailable ranges [ 24.213855] On node 0, zone Normal: 2049 pages in unavailable ranges [ 24.213877] On node 0, zone Normal: 4096 pages in unavailable ranges [ 24.213902] ACPI: PM-Timer IO Port: 0x808 [ 24.213923] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 24.213944] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 24.213965] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 24.213985] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 24.214007] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 24.214028] ACPI: Using ACPI (MADT) for SMP configuration information [ 24.214048] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 24.214070] CPU topo: Max. logical packages: 1 [ 24.214096] CPU topo: Max. logical dies: 1 [ 24.214117] CPU topo: Max. dies per package: 1 [ 24.214139] CPU topo: Max. threads per core: 1 [ 24.214160] CPU topo: Num. cores per package: 8 [ 24.214183] CPU topo: Num. threads per package: 8 [ 24.214205] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 24.214225] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 24.214386] Booting paravirtualized kernel on bare hardware [ 24.214407] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 24.214428] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 24.214450] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 24.214470] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 24.214496] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 24.214517] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.41+deb13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 24.214546] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.41+deb13-amd64", will be passed to user space. [ 24.214572] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 24.214593] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 24.214615] Fallback order for Node 0: 0 [ 24.214637] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 24.214658] Policy zone: Normal [ 24.214679] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 24.214704] AGP: Checking aperture... [ 24.214725] AGP: No AGP bridge found [ 24.214747] AGP: Node 0: aperture [bus addr 0x4dc000000-0x4ddffffff] (32MB) [ 24.214769] Aperture beyond 4GB. Ignoring. [ 24.214789] AGP: Your BIOS doesn't leave an aperture memory hole [ 24.214810] AGP: Please enable the IOMMU option in the BIOS setup [ 24.214831] AGP: This costs you 64MB of RAM [ 24.214852] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 24.214879] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 24.214922] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 24.214944] ftrace: allocating 45725 entries in 179 pages [ 24.214964] ftrace: allocated 179 pages with 5 groups [ 24.214985] Dynamic Preempt: voluntary [ 24.215007] rcu: Preemptible hierarchical RCU implementation. [ 24.215029] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 24.215052] Trampoline variant of Tasks RCU enabled. [ 24.215078] Rude variant of Tasks RCU enabled. [ 24.215099] Tracing variant of Tasks RCU enabled. [ 24.215121] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 24.215143] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 24.215165] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 24.215187] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 24.215208] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 24.215231] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 24.215252] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 24.215278] spurious 8259A interrupt: IRQ7. [ 24.215301] Console: colour VGA+ 80x25 [ 24.215322] printk: legacy console [tty0] enabled [ 24.215343] ACPI: Core revision 20240827 [ 24.215365] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 24.215385] APIC: Switch to symmetric I/O mode setup [ 24.215406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 24.215428] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c968b8c29e, max_idle_ns: 440795305782 ns [ 24.215453] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.59 BogoMIPS (lpj=12373188) [ 24.215475] LVT offset 1 assigned for vector 0xf9 [ 24.215496] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 24.215517] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 24.215539] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 24.215560] Spectre V2 : Mitigation: Retpolines [ 24.215582] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 24.215603] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 24.215625] RETBleed: Mitigation: untrained return thunk [ 24.215652] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 24.215674] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 24.215695] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 24.215717] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 24.215738] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 24.215759] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 24.215781] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 24.215802] Freeing SMP alternatives memory: 40K [ 24.215828] pid_max: default: 32768 minimum: 301 [ 24.215849] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 24.215871] landlock: Up and running. [ 24.215891] Yama: disabled by default; enable with sysctl kernel.yama.* [ 24.215913] AppArmor: AppArmor initialized [ 24.215935] TOMOYO Linux initialized [ 24.215956] LSM support for eBPF active [ 24.215977] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 24.215999] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 24.216036] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 24.216058] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 24.216081] ... version: 0 [ 24.216101] ... bit width: 48 [ 24.216121] ... generic registers: 6 [ 24.216141] ... value mask: 0000ffffffffffff [ 24.216161] ... max period: 00007fffffffffff [ 24.216181] ... fixed-purpose events: 0 [ 24.216201] ... event mask: 000000000000003f [ 24.216222] signal: max sigframe size: 1776 [ 24.216241] rcu: Hierarchical SRCU implementation. [ 24.216263] rcu: Max phase no-delay instances is 1000. [ 24.216283] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 24.216303] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 24.216329] smp: Bringing up secondary CPUs ... [ 24.216352] smpboot: x86: Booting SMP configuration: [ 24.216373] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 24.216394] smp: Brought up 1 node, 8 CPUs [ 24.216415] smpboot: Total of 8 processors activated (49492.75 BogoMIPS) [ 24.216436] node 0 deferred pages initialised in 52ms [ 24.216460] Memory: 24359120K/25119540K available (16384K kernel code, 2488K rwdata, 11788K rodata, 4152K init, 4944K bss, 752428K reserved, 0K cma-reserved) [ 24.216482] devtmpfs: initialized [ 24.216503] x86/mm: Memory block size: 128MB [ 24.216530] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 24.216552] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 24.216572] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 24.216593] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 24.216613] pinctrl core: initialized pinctrl subsystem [ 24.216633] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 24.216655] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 24.216676] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 24.216698] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 24.216768] thermal_sys: Registered thermal governor 'fair_share' [ 24.216789] thermal_sys: Registered thermal governor 'bang_bang' [ 24.216808] thermal_sys: Registered thermal governor 'step_wise' [ 24.216829] thermal_sys: Registered thermal governor 'user_space' [ 24.216848] thermal_sys: Registered thermal governor 'power_allocator' [ 24.216869] cpuidle: using governor ladder [ 24.216889] cpuidle: using governor menu [ 24.216910] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 24.216930] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 24.216975] PCI: Using configuration type 1 for base access [ 24.217002] PCI: Using configuration type 1 for extended access [ 24.217023] mtrr: your CPUs had inconsistent variable MTRR settings [ 24.217044] mtrr: probably your BIOS does not setup all CPUs. [ 24.217065] mtrr: corrected configuration. [ 24.217087] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 24.217112] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 24.217133] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 24.217153] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 24.217175] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 24.217194] ACPI: Added _OSI(Module Device) [ 24.217220] ACPI: Added _OSI(Processor Device) [ 24.217241] ACPI: Added _OSI(Processor Aggregator Device) [ 24.217262] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 24.217283] ACPI: Interpreter enabled [ 24.217304] ACPI: PM: (supports S0 S3 S4 S5) [ 24.217325] ACPI: Using IOAPIC for interrupt routing [ 24.217346] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 24.217389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 24.217415] PCI: Using E820 reservations for host bridge windows [ 24.217436] ACPI: Enabled 8 GPEs in block 00 to 1F [ 24.217459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 24.217803] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 24.218092] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 24.220327] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 24.220647] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 24.222217] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 24.222528] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 24.222838] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 24.224146] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 24.224461] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 24.224811] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 24.225841] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 24.226187] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 24.226531] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 24.227691] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 24.228028] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 24.228369] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 24.229624] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 24.229944] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 24.230258] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 24.231532] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 24.231884] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 24.232243] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 24.234677] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 24.235332] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 24.235956] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 24.236283] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 24.236599] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 24.237301] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 24.237945] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 24.238295] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 24.238643] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 24.238988] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 24.241272] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 24.241607] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 24.241919] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 24.242234] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 24.242547] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 24.243205] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 24.243539] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 24.243855] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 24.244177] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 24.244793] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 24.245423] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 24.246055] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 24.246685] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 24.246998] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 24.247340] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 24.247680] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 24.248026] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 24.248375] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 24.248716] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 24.249080] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 24.249439] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 24.251474] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 24.252116] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 24.252439] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 24.252758] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 24.253079] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 24.253767] pci 0000:01:00.1: supports D1 D2 [ 24.254080] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 24.254766] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 24.257616] pci 0000:02:00.0: PME# supported from D3hot [ 24.257966] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 24.258618] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 24.259357] pci 0000:03:00.0: supports D1 D2 [ 24.259757] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 24.260111] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 24.260864] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 24.261603] pci 0000:04:00.0: supports D1 D2 [ 24.261954] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 24.262272] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 24.262917] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 24.263868] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 24.264206] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 24.264534] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 24.266869] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 24.267212] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 24.267919] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 24.269290] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 24.269894] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 24.270260] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 24.270906] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 24.271223] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 24.271540] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 24.271860] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 24.272191] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 24.272509] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 24.272831] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 24.272860] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 24.272883] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 24.272906] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 24.272927] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 24.272948] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 24.272975] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 24.272996] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 24.273018] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 24.273039] iommu: Default domain type: Translated [ 24.273062] iommu: DMA domain TLB invalidation policy: lazy mode [ 24.273082] pps_core: LinuxPPS API ver. 1 registered [ 24.273103] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 24.273124] PTP clock support registered [ 24.273144] EDAC MC: Ver: 3.0.0 [ 24.273165] NetLabel: Initializing [ 24.273185] NetLabel: domain hash size = 128 [ 24.273206] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 24.273226] NetLabel: unlabeled traffic allowed by default [ 24.273250] PCI: Using ACPI for IRQ routing [ 24.273270] PCI: pci_cache_line_size set to 64 bytes [ 24.273292] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 24.274066] pci 0000:01:00.0: vgaarb: bridge control possible [ 24.274396] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 24.274425] vgaarb: loaded [ 24.274448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.274469] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 24.274491] clocksource: Switched to clocksource tsc-early [ 24.274513] VFS: Disk quotas dquot_6.6.0 [ 24.274535] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 24.274555] AppArmor: AppArmor Filesystem Enabled [ 24.274576] pnp: PnP ACPI init [ 24.274852] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 24.275129] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 24.275438] system 00:03: [io 0x040b] has been reserved [ 24.275735] system 00:03: [io 0x04d6] has been reserved [ 24.276040] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 24.276333] system 00:03: [io 0x0c14] has been reserved [ 24.276625] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 24.276918] system 00:03: [io 0x0c52] has been reserved [ 24.277221] system 00:03: [io 0x0c6c] has been reserved [ 24.277520] system 00:03: [io 0x0c6f] has been reserved [ 24.277808] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 24.278078] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 24.278344] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 24.278636] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 24.278950] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 24.279220] system 00:03: [io 0x0800-0x089f] has been reserved [ 24.279484] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 24.279753] system 00:03: [io 0x0900-0x090f] has been reserved [ 24.280030] system 00:03: [io 0x0910-0x091f] has been reserved [ 24.280302] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 24.280570] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 24.280837] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 24.281099] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 24.281362] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 24.281627] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 24.281893] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 24.282152] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 24.282414] system 00:04: [io 0x0290-0x029f] has been reserved [ 24.282679] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 24.283200] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 24.283252] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 24.283275] NET: Registered PF_INET protocol family [ 24.283298] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 24.283325] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 24.283347] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 24.283370] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 24.283392] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 24.283415] TCP: Hash tables configured (established 262144 bind 65536) [ 24.283437] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 24.283459] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 24.283480] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 24.283502] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 24.283528] NET: Registered PF_XDP protocol family [ 24.283865] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x750 took 17356 usecs [ 24.297531] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x750 took 15446 usecs [ 24.297841] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x750 took 15436 usecs [ 24.298191] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x750 took 15611 usecs [ 24.298541] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 24.298573] PCI: CLS 64 bytes, default 64 [ 24.298598] Trying to unpack rootfs image as initramfs... [ 24.298627] PCI-DMA: Disabling AGP. [ 24.298651] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 24.298674] PCI-DMA: using GART IOMMU. [ 24.298698] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 24.298721] software IO TLB: tearing down default memory pool [ 24.298744] LVT offset 0 assigned for vector 0x400 [ 24.298768] perf: AMD IBS detected (0x000000ff) [ 24.298791] amd_uncore: 4 amd_nb counters detected [ 24.298815] Initialise system trusted keyrings [ 24.298844] Key type blacklist registered [ 24.298868] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 24.298892] zbud: loaded [ 24.298915] fuse: init (API version 7.41) [ 24.298939] integrity: Platform Keyring initialized [ 24.298963] integrity: Machine keyring initialized [ 24.298986] Key type asymmetric registered [ 24.299010] Asymmetric key parser 'x509' registered [ 24.299034] Freeing initrd memory: 130096K [ 24.299064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 24.299089] io scheduler mq-deadline registered [ 24.299112] ledtrig-cpu: registered to indicate activity on CPUs [ 24.299135] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.299159] Could not retrieve perf counters (-19) [ 24.299183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 24.299206] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 24.299230] Linux agpgart interface v0.103 [ 24.299253] i8042: PNP: No PS/2 controller found. [ 24.299282] mousedev: PS/2 mouse device common for all mice [ 24.299569] rtc_cmos 00:06: RTC can wake from S4 [ 24.299856] rtc_cmos 00:06: registered as rtc0 [ 24.300161] rtc_cmos 00:06: setting system clock to 2025-08-17T12:01:34 UTC (1755432094) [ 24.300448] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 24.300479] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 24.300504] NET: Registered PF_INET6 protocol family [ 24.300529] Segment Routing with IPv6 [ 24.300558] In-situ OAM (IOAM) with IPv6 [ 24.300584] mip6: Mobile IPv6 [ 24.300608] NET: Registered PF_PACKET protocol family [ 24.300632] mpls_gso: MPLS GSO support [ 24.300655] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 24.300679] microcode: Current revision: 0x0600063e [ 24.300703] microcode: Updated early from: 0x06000626 [ 24.300727] IPI shorthand broadcast: enabled [ 24.300750] sched_clock: Marking stable (1200012320, 3885072)->(1230880145, -26982753) [ 24.300781] registered taskstats version 1 [ 24.300806] Loading compiled-in X.509 certificates [ 24.300830] Loaded X.509 cert 'Build time autogenerated kernel key: 8c7e9a523663a5d33056c604b7fe12544c99f59f' [ 24.300853] Demotion targets for Node 0: null [ 24.300878] Key type .fscrypt registered [ 24.300901] Key type fscrypt-provisioning registered [ 24.300925] Key type encrypted registered [ 24.300949] AppArmor: AppArmor sha256 policy hashing enabled [ 24.300977] ima: No TPM chip found, activating TPM-bypass! [ 24.301000] ima: Allocated hash algorithm: sha256 [ 24.301023] ima: No architecture policies found [ 24.301046] evm: Initialising EVM extended attributes: [ 24.301069] evm: security.selinux [ 24.301091] evm: security.SMACK64 (disabled) [ 24.301115] evm: security.SMACK64EXEC (disabled) [ 24.301139] evm: security.SMACK64TRANSMUTE (disabled) [ 24.301163] evm: security.SMACK64MMAP (disabled) [ 24.301190] evm: security.apparmor [ 24.301215] evm: security.ima [ 24.301238] evm: security.capability [ 24.301261] evm: HMAC attrs: 0x1 [ 24.301284] RAS: Correctable Errors collector initialized. [ 24.301308] clk: Disabling unused clocks [ 24.301332] PM: genpd: Disabling unused power domains [ 24.301356] Freeing unused decrypted memory: 2028K [ 24.301379] Freeing unused kernel image (initmem) memory: 4152K [ 24.301408] Write protecting the kernel read-only data: 28672k [ 24.301432] Freeing unused kernel image (rodata/data gap) memory: 500K [ 24.301456] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 24.301480] Run /init as init process [ 24.301502] with arguments: [ 24.301526] /init [ 24.301549] with environment: [ 24.301572] HOME=/ [ 24.301595] TERM=linux [ 24.301619] BOOT_IMAGE=/boot/vmlinuz-6.12.41+deb13-amd64 [ 24.301648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 24.301673] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 24.301722] Floppy drive(s): fd0 is 1.44M [ 24.301756] ACPI: button: Power Button [PWRF] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 24.302369] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 24.302642] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 24.302917] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 24.303185] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 24.303451] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 24.303756] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 24.303785] FDC 0 is a post-1991 82077 [ 24.303808] SCSI subsystem initialized [ 24.303831] tsc: Refined TSC clocksource calibration: 3093.303 MHz [ 24.303854] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c96915f3d1, max_idle_ns: 440795271230 ns [ 24.303881] clocksource: Switched to clocksource tsc [ 24.303903] ACPI: bus type USB registered [ 24.303924] usbcore: registered new interface driver usbfs [ 24.303946] usbcore: registered new interface driver hub [ 24.303967] usbcore: registered new device driver usb [ 24.303989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 24.304341] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 24.304654] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.304691] ACPI: bus type drm_connector registered [ 24.304717] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 24.305060] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 24.305402] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 24.305749] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 24.306483] libata version 3.00 loaded. [ 24.306824] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 24.306855] QUIRK: Enable AMD PLL fix [ 24.307242] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 24.307616] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 24.307937] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 24.308266] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 24.308585] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 24.308905] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 24.309221] ehci-pci 0000:00:12.2: EHCI Host Controller [ 24.309573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 24.309896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.310218] usb usb1: Product: xHCI Host Controller [ 24.310554] usb usb1: Manufacturer: Linux 6.12.41+deb13-amd64 xhci-hcd [ 24.310878] usb usb1: SerialNumber: ... [ 24.311239] hub 1-0:1.0: USB hub found [ 24.311592] hub 1-0:1.0: 2 ports detected [ 24.312034] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 24.312386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 24.312707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.313025] usb usb2: Product: xHCI Host Controller [ 24.313376] usb usb2: Manufacturer: Linux 6.12.41+deb13-amd64 xhci-hcd [ 24.313729] usb usb2: SerialNumber: ... [ 24.314110] hub 2-0:1.0: USB hub found [ 24.314477] hub 2-0:1.0: 2 ports detected [ 24.314822] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 24.315162] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 24.315481] ehci-pci 0000:00:12.2: debug port 1 [ 24.315787] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 24.316122] pata_via 0000:05:00.1: version 0.3.4 [ 24.316421] scsi host0: pata_via [ 24.316710] scsi host1: pata_via [ 24.316739] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 24.316763] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 24.317030] scsi host2: pata_atiixp [ 24.317310] scsi host3: pata_atiixp [ 24.317339] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 24.317367] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 24.317675] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 24.317991] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 24.318303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.318618] usb usb3: Product: EHCI Host Controller [ 24.318925] usb usb3: Manufacturer: Linux 6.12.41+deb13-amd64 ehci_hcd [ 24.319237] usb usb3: SerialNumber: ... [ 24.319585] hub 3-0:1.0: USB hub found [ 24.319920] hub 3-0:1.0: 5 ports detected [ 24.320252] ehci-pci 0000:00:13.2: EHCI Host Controller [ 24.320560] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 24.320867] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 24.321174] ehci-pci 0000:00:13.2: debug port 1 [ 24.321491] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 24.321802] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 24.322133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 24.322452] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.322788] usb usb4: Product: EHCI Host Controller [ 24.323141] usb usb4: Manufacturer: Linux 6.12.41+deb13-amd64 ehci_hcd [ 24.323538] usb usb4: SerialNumber: ... [ 24.323918] hub 4-0:1.0: USB hub found [ 24.324278] hub 4-0:1.0: 5 ports detected [ 24.324595] ehci-pci 0000:00:16.2: EHCI Host Controller [ 24.324911] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 24.325223] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 24.325530] ehci-pci 0000:00:16.2: debug port 1 [ 24.325839] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 24.326148] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 24.326470] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 24.326782] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.327103] usb usb5: Product: EHCI Host Controller [ 24.327415] usb usb5: Manufacturer: Linux 6.12.41+deb13-amd64 ehci_hcd [ 24.327724] usb usb5: SerialNumber: ... [ 24.328081] hub 5-0:1.0: USB hub found [ 24.328420] hub 5-0:1.0: 4 ports detected [ 24.328750] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 24.329071] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 24.329393] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 24.329711] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 24.330028] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 24.330342] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 24.330673] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 24.330992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.331308] usb usb6: Product: xHCI Host Controller [ 24.331631] usb usb6: Manufacturer: Linux 6.12.41+deb13-amd64 xhci-hcd [ 24.331957] usb usb6: SerialNumber: ... [ 24.332319] hub 6-0:1.0: USB hub found [ 24.332670] hub 6-0:1.0: 2 ports detected [ 24.333092] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM. [ 24.333420] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 24.333745] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.334072] usb usb7: Product: xHCI Host Controller [ 24.334389] usb usb7: Manufacturer: Linux 6.12.41+deb13-amd64 xhci-hcd [ 24.334731] usb usb7: SerialNumber: ... [ 24.335081] hub 7-0:1.0: USB hub found [ 24.335435] hub 7-0:1.0: 2 ports detected [ 24.335465] ata3.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 24.335488] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 24.335511] ata3.01: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 24.335539] ata3.00: limited to UDMA/33 due to 40-wire cable [ 24.335562] ata3.01: limited to UDMA/33 due to 40-wire cable [ 24.335973] usb 5-2: new high-speed USB device number 2 using ehci-pci [ 24.336298] scsi 2:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 24.336603] scsi 2:0:1:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 24.336995] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 24.337313] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 24.337628] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 24.337946] ahci 0000:00:11.0: version 3.0 [ 24.338258] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 24.338566] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 24.338873] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 24.339150] scsi host4: ahci [ 24.339429] scsi host5: ahci [ 24.339714] scsi host6: ahci [ 24.339994] scsi host7: ahci [ 24.340089] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 24.340115] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 24.340139] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 24.340162] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 24.340488] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 24.340815] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 24.341146] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 24.341438] scsi host8: ahci [ 24.341732] scsi host9: ahci [ 24.341763] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 24.341786] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 24.342083] sd 2:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 24.342410] sd 2:0:0:0: [sda] Write Protect is off [ 24.342744] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.343079] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.343411] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 24.343443] sda: sda1 sda2 sda3 sda4 [ 24.343781] sd 2:0:0:0: [sda] Attached SCSI disk [ 24.344241] usb 5-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 24.344617] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 24.344970] usb 5-2: Product: 802.11n NIC [ 24.345331] usb 5-2: Manufacturer: Realtek [ 24.345655] usb 5-2: SerialNumber: ... [ 24.345985] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 24.346313] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.346641] usb usb8: Product: OHCI PCI host controller [ 24.346958] usb usb8: Manufacturer: Linux 6.12.41+deb13-amd64 ohci_hcd [ 24.347278] usb usb8: SerialNumber: ... [ 24.347636] hub 8-0:1.0: USB hub found [ 24.347979] hub 8-0:1.0: 5 ports detected [ 24.348317] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 24.348647] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 24.348970] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 24.349001] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 24.349331] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 24.349656] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.350030] usb usb9: Product: OHCI PCI host controller [ 24.350374] usb usb9: Manufacturer: Linux 6.12.41+deb13-amd64 ohci_hcd [ 24.350728] usb usb9: SerialNumber: ... [ 24.351118] hub 9-0:1.0: USB hub found [ 24.351497] hub 9-0:1.0: 5 ports detected [ 24.351849] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 24.352231] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 24.352559] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 24.352892] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 24.353206] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.353522] usb usb10: Product: OHCI PCI host controller [ 24.353909] usb usb10: Manufacturer: Linux 6.12.41+deb13-amd64 ohci_hcd [ 24.354227] usb usb10: SerialNumber: ... [ 24.354577] hub 10-0:1.0: USB hub found [ 24.354926] hub 10-0:1.0: 2 ports detected [ 24.355245] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 24.355562] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 24.355875] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 24.356208] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 24.356527] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 24.356848] usb usb11: Product: OHCI PCI host controller [ 24.357172] usb usb11: Manufacturer: Linux 6.12.41+deb13-amd64 ohci_hcd [ 24.357492] usb usb11: SerialNumber: ... [ 24.357868] hub 11-0:1.0: USB hub found [ 24.358250] hub 11-0:1.0: 4 ports detected [ 24.358699] usb 8-1: new full-speed USB device number 2 using ohci-pci [ 24.358735] ata5: SATA link down (SStatus 0 SControl 300) [ 24.359184] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 24.359226] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 24.359251] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 330) [ 24.359276] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 24.359301] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 24.359326] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.359350] ata7.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 24.359375] ata7.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 24.359400] ata7.00: configured for UDMA/133 [ 24.359425] ata9.00: ATA-8: ST2000DL001-9VT156, CC98, max UDMA/133 [ 24.359454] ata9.00: 3907029168 sectors, multi 0: LBA48 [ 24.359478] ata10.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 24.359502] ata8.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 24.359527] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 24.359550] ata9.00: configured for UDMA/133 [ 24.359574] ata10.00: configured for UDMA/133 [ 24.359598] ata8.00: configured for UDMA/133 [ 24.359942] usb 8-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 24.360304] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 24.360648] usb 8-1: Product: USB Device [ 24.360993] usb 8-1: Manufacturer: COMPANY [ 24.361403] usb 4-3: new high-speed USB device number 3 using ehci-pci [ 24.361437] ata6.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100 [ 24.361461] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 24.361485] ata6.00: configured for UDMA/100 [ 24.361795] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MK2555GS 1J PQ: 0 ANSI: 5 [ 24.362104] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 24.362405] sd 5:0:0:0: [sdb] Write Protect is off [ 24.362706] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 24.363005] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.363304] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 24.363631] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 24.363957] sd 6:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 24.364295] sd 6:0:0:0: [sdc] Write Protect is off [ 24.364627] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 24.364951] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.365282] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 24.365630] scsi 7:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 24.365663] sdc: sdc1 sdc2 [ 24.366003] sd 6:0:0:0: [sdc] Attached SCSI disk [ 24.366329] scsi 8:0:0:0: Direct-Access ATA ST2000DL001-9VT1 CC98 PQ: 0 ANSI: 5 [ 24.366646] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 24.366955] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 24.367264] sd 8:0:0:0: [sdd] Write Protect is off [ 24.367568] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 24.367880] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.368222] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 24.368534] scsi 9:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 24.368851] sd 9:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 24.369161] sd 9:0:0:0: [sde] 4096-byte physical blocks [ 24.369464] sd 9:0:0:0: [sde] Write Protect is off [ 24.369769] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 24.370076] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.370449] sd 9:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 24.370477] sdb: sdb1 sdb2 [ 24.370781] sd 5:0:0:0: [sdb] Attached SCSI disk [ 24.370809] sde: sde1 sde2 [ 24.371113] sd 9:0:0:0: [sde] Attached SCSI disk [ 24.371140] sdd: sdd1 [ 24.371445] sd 8:0:0:0: [sdd] Attached SCSI disk [ 24.371847] usb 8-2: new full-speed USB device number 3 using ohci-pci [ 24.372239] usb 4-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 24.372592] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 24.372931] usb 4-3: SerialNumber: ... [ 24.373271] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 24.373307] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 24.373632] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 24.373958] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 24.374303] usb 8-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 24.374652] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 24.375006] usb 8-2: Product: A4Tech Gaming Mouse [ 24.375317] usb 8-2: Manufacturer: PixArt [ 24.375626] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 24.375655] hid: raw HID events driver (C) Jiri Kosina [ 24.375678] usbcore: registered new interface driver usbhid [ 24.375701] usbhid: USB HID core driver [ 24.375723] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 24.376058] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 24.376095] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 24.376400] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 24.376431] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 24.376456] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 24.376760] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 24.376790] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:09DA:3519.0004/input/input6 [ 24.377100] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 24.377131] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:09DA:3519.0005/input/input8 [ 24.377435] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 24.377843] usb 3-5: new high-speed USB device number 4 using ehci-pci [ 24.378161] usb 3-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 24.378477] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 24.378860] hub 3-5:1.0: USB hub found [ 24.379232] hub 3-5:1.0: 2 ports detected [ 24.379588] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 24.379937] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 24.380295] usb 9-2: Product: NOVA AVR [ 24.380644] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 24.380998] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 24.381037] [drm] amdgpu kernel modesetting enabled. [ 24.381063] amdgpu: Virtual CRAT table created for CPU [ 24.381089] amdgpu: Topology: Add CPU node [ 24.381114] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 24.381138] [drm] register mmio base: 0xFEA00000 [ 24.381162] [drm] register mmio size: 262144 [ 24.381186] [drm] add ip block number 0 <vi_common> [ 24.381210] [drm] add ip block number 1 <gmc_v8_0> [ 24.381234] [drm] add ip block number 2 <tonga_ih> [ 24.381263] [drm] add ip block number 3 <gfx_v8_0> [ 24.381287] [drm] add ip block number 4 <sdma_v3_0> [ 24.381311] [drm] add ip block number 5 <powerplay> [ 24.381336] [drm] add ip block number 6 <dm> [ 24.381360] [drm] add ip block number 7 <uvd_v6_0> [ 24.381394] [drm] add ip block number 8 <vce_v3_0> [ 24.381715] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 24.381744] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 24.381766] [drm] UVD is enabled in VM mode [ 24.381794] [drm] UVD ENC is enabled in VM mode [ 24.381817] [drm] VCE enabled in VM mode [ 24.382130] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 24.382159] Console: switching to colour dummy device 80x25 [ 24.382479] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 24.382798] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 24.382827] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 24.383142] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 24.383472] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 24.383502] [drm] Detected VRAM RAM=8192M, BAR=256M [ 24.383525] [drm] RAM width 256bits GDDR5 [ 24.383548] [drm] amdgpu: 8192M of VRAM memory ready [ 24.383570] [drm] amdgpu: 11997M of GTT memory ready. [ 24.383592] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 24.383614] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 24.383636] [drm] Chained IB support enabled! [ 24.383659] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 24.383686] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 24.383709] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 24.383734] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 24.383755] [drm] UVD and UVD ENC initialized successfully. [ 24.383777] [drm] VCE initialized successfully. [ 24.383975] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 24.384324] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 24.384648] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 24.384683] [drm] Initialized amdgpu 3.61.0 for 0000:01:00.0 on minor 0 [ 24.384706] fbcon: amdgpudrmfb (fb0) is primary device [ 24.384728] Console: switching to colour frame buffer device 160x64 [ 24.385041] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 24.385071] raid6: sse2x4 gen() 12244 MB/s [ 24.385093] raid6: sse2x2 gen() 11288 MB/s [ 24.385115] raid6: sse2x1 gen() 7910 MB/s [ 24.385137] raid6: using algorithm sse2x4 gen() 12244 MB/s [ 24.385159] raid6: .... xor() 4562 MB/s, rmw enabled [ 24.385187] raid6: using ssse3x2 recovery algorithm [ 24.385209] xor: automatically using best checksumming function avx [ 24.385230] async_tx: api initialized (async) [ 24.385253] Btrfs loaded, zoned=yes, fsverity=yes [ 24.385276] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 24.385301] floppy: error 10 while reading block 0 [ 24.385322] EXT4-fs (sda4): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 24.385344] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 24.385701] random: crng init done [ 24.387704] EXT4-fs (sda4): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. [ 24.387869] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 24.387895] device-mapper: uevent: version 1.0.3 [ 24.387919] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 24.388130] loop: module loaded [ 24.388394] lp: driver loaded but no devices found [ 24.388470] ppdev: user-space parallel port driver [ 24.738786] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 24.739900] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 24.741736] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 24.742202] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 24.742619] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 24.752063] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 24.756726] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 25.076028] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 25.256031] acpi_cpufreq: overriding BIOS provided _PSD data [ 25.260079] at24 0-0050: supply vcc not found, using dummy regulator [ 25.264028] at24 0-0050: 256 byte spd EEPROM, read-only [ 25.265070] cryptd: max_cpu_qlen set to 1000 [ 25.268031] at24 0-0051: supply vcc not found, using dummy regulator [ 25.268410] at24 0-0051: 256 byte spd EEPROM, read-only [ 25.268765] at24 0-0052: supply vcc not found, using dummy regulator [ 25.272306] at24 0-0052: 256 byte spd EEPROM, read-only [ 25.272696] at24 0-0053: supply vcc not found, using dummy regulator [ 25.280035] at24 0-0053: 256 byte spd EEPROM, read-only [ 25.305306] mc: Linux media interface: v0.10 [ 25.308024] AES CTR mode by8 optimization enabled [ 25.400026] videodev: Linux video capture interface: v2.00 [ 25.476066] usb 4-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.488039] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 25.488136] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 25.488173] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 25.596030] usbcore: registered new interface driver uvcvideo [ 25.620043] Registered IR keymap rc-avermedia-m135a [ 25.620147] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.624028] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 25.640046] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 25.640127] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 25.640162] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.640200] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 25.716031] IR NEC protocol handler initialized [ 25.720033] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 25.728448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 25.728499] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 25.728565] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 25.728611] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 25.728655] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 25.728693] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 25.740029] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.740400] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.740639] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.784091] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.784490] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.784751] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.785002] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.785251] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 25.785497] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.785813] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 25.786073] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 25.786333] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 25.792092] kvm_amd: TSC scaling supported [ 25.792165] kvm_amd: Nested Virtualization enabled [ 25.792208] kvm_amd: Nested Paging enabled [ 25.792250] kvm_amd: LBR virtualization supported [ 25.816025] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 25.816122] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 25.816159] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 25.816198] MCE: In-kernel MCE decoding enabled. [ 25.820033] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 25.820111] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 25.820147] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 25.820187] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 25.820222] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 25.896136] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 25.896232] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 25.896260] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 25.896286] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896311] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 25.896345] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896367] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896386] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896408] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896430] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896453] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896472] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896494] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896523] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896545] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.896572] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.052109] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 26.132120] tda829x 13-004b: setting tuner address to 60 [ 26.172039] usb 5-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 26.172920] usb 5-2: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 26.173654] usb 5-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 26.174412] usb 5-2: Firmware revision 28.0 (signature 0x88e1) [ 26.220107] tda829x 13-004b: type set to tda8290+75a [ 26.748030] usbcore: registered new interface driver rtl8xxxu [ 26.760045] rtl8xxxu 5-2:1.0 wlxd037459855f3: renamed from wlan0 [ 26.976066] usb 4-3: set resolution quirk: cval->res = 384 [ 26.976897] usbcore: registered new interface driver snd-usb-audio [ 29.940065] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 29.940344] saa7134: saa7133[0]: registered device radio0 [ 29.964036] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 29.964137] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 34.228026] Process accounting resumed [ 34.528044] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 34.976041] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 35.304089] NET: Registered PF_QIPCRTR protocol family [ 37.252020] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 37.260027] wlxd037459855f3: authenticate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 37.260061] wlxd037459855f3: send auth to 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 37.260087] wlxd037459855f3: authenticated [ 37.260118] wlxd037459855f3: associate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 37.268021] wlxd037459855f3: RX AssocResp from 6C6DEF9152362CC1FFD2B5D63C0AC627 (capab=0x411 status=0 aid=5) [ 37.272026] usb 5-2: rtl8xxxu_bss_info_changed: HT supported [ 37.272381] wlxd037459855f3: associated [ 37.400057] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 37.400505] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 37.400827] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 41.072033] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 52.804038] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 60.736155] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 67.832207] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 334.304139] Process accounting resumed [ 496.796039] Non-volatile memory driver v1.3 [ 502.068043] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 509.176081] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 509.176306] floppy: error 10 while reading block 0 [ 523.008137] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 523.008310] floppy: error 10 while reading block 0 [ 524.088196] usb 4-3: reset high-speed USB device number 3 using ehci-pci [ 528.364039] Bluetooth: Core ver 2.22 [ 528.364133] NET: Registered PF_BLUETOOTH protocol family [ 528.364182] Bluetooth: HCI device and connection manager initialized [ 528.364219] Bluetooth: HCI socket layer initialized [ 528.364255] Bluetooth: L2CAP socket layer initialized [ 528.364290] Bluetooth: SCO socket layer initialized [ 542.996202] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 542.996414] floppy: error 10 while reading block 0 [ 545.008135] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 716.900248] wlxd037459855f3: deauthenticating from 6C6DEF9152362CC1FFD2B5D63C0AC627 by local choice (Reason: 3=DEAUTH_LEAVING) [ 717.572031] watchdog: watchdog0: watchdog did not stop!