[ 0.000000] Linux version 5.15.0-144-generic (XXX@XXX) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #157-Ubuntu SMP Mon Jun 16 07:33:10 UTC 2025 (Ubuntu 5.15.0-144.157-generic 5.15.184) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-144-generic root=UUID=HASH_34B-AC84-B673-EAED-E1E2321BEFE7 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: /NF-MCP61, BIOS 6.00 PG 01/09/2007 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2009.402 MHz processor [ 0.003445] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003451] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.009376] AGP: No AGP bridge found [ 0.009434] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.009577] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009752] total RAM covered: 3071M [ 0.010135] Found optimal setting for mtrr clean up [ 0.010137] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.010310] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved [ 0.010328] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 [ 0.012980] found SMP MP-table at [mem 0x000f3a00-0x000f3a0f] RAMDISK: [mem 0x26bf9000-0x2f5f3fff] ACPI: Early table checksum verification disabled [ 0.013484] ACPI: RSDP 0x00000000000F7A10 000014 (v00 Nvidia) [ 0.013492] ACPI: RSDT 0x00000000BFEE3040 000038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.013503] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.013512] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20210730/tbfadt-615) [ 0.013521] ACPI: DSDT 0x00000000BFEE3180 006395 (v01 NVIDIA NVDAACPI 00001000 MSFT 0100000E) [ 0.013528] ACPI: FACS 0x00000000BFEE0000 000040 [ 0.013535] ACPI: SSDT 0x00000000BFEE9640 0001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.013542] ACPI: _HPT 0x00000000BFEE9880 000038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098) [ 0.013549] ACPI: MCFG 0x00000000BFEE9900 00003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.013556] ACPI: APIC 0x00000000BFEE9580 00007C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.013562] ACPI: Reserving FACP table memory at [mem 0xbfee30c0-0xbfee3133] ACPI: Reserving DSDT table memory at [mem 0xbfee3180-0xbfee9514] ACPI: Reserving FACS table memory at [mem 0xbfee0000-0xbfee003f] ACPI: Reserving SSDT table memory at [mem 0xbfee9640-0xbfee9803] ACPI: Reserving _HPT table memory at [mem 0xbfee9880-0xbfee98b7] ACPI: Reserving MCFG table memory at [mem 0xbfee9900-0xbfee993b] ACPI: Reserving APIC table memory at [mem 0xbfee9580-0xbfee95fb] Scanning NUMA topology in Northbridge 24 [ 0.013950] No NUMA configuration found [ 0.013952] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff] Zone ranges: [ 0.014862] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000013fffffff] Device empty [ 0.014875] Movable zone start for each node [ 0.014881] Early memory node ranges [ 0.014882] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bfedffff] node 0: [mem 0x0000000100000000-0x000000013fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.015037] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.047969] On node 0, zone Normal: 288 pages in unavailable ranges [ 0.047997] Nvidia board detected. Ignoring ACPI timer override. [ 0.047999] If you got timer trouble try acpi_use_timer_override [ 0.048123] Detected use of extended apic ids on hypertransport bus [ 0.048136] ACPI: PM-Timer IO Port: 0x1008 [ 0.048150] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.048154] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.048169] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.048174] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.048177] ACPI: BIOS IRQ0 override ignored. [ 0.048179] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.048183] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.048186] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.048193] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.048197] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.048221] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbfee0000-0xffffffff] [mem 0xbff00000-0xefffffff] available for PCI devices [ 0.048235] Booting paravirtualized kernel on bare hardware [ 0.048239] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.048253] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.050000] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u1048576 [ 0.050013] pcpu-alloc: s217088 r8192 d28672 u1048576 alloc=1*2097152 [ 0.050019] pcpu-alloc: [0] 0 1 [ 0.050073] Built 1 zonelists, mobility grouping on. Total pages: 1031652 [ 0.050076] Policy zone: Normal [ 0.050079] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-144-generic root=UUID=HASH_34B-AC84-B673-EAED-E1E2321BEFE7 ro quiet splash [ 0.050207] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-144-generic", will be passed to user space. [ 0.052665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.053909] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.053963] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.120111] AGP: Checking aperture... [ 0.126029] AGP: No AGP bridge found [ 0.126031] AGP: Node 0: aperture [bus addr 0xc454000000-0xc455ffffff] (32MB) [ 0.126035] Aperture beyond 4GB. Ignoring. [ 0.126036] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.126038] AGP: Please enable the IOMMU option in the BIOS setup [ 0.126039] AGP: This costs you 64MB of RAM [ 0.126044] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.126049] PM: hibernation: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] Memory: 3788916K/4192760K available (16393K kernel code, 4398K rwdata, 10988K rodata, 3284K init, 18780K bss, 403584K reserved, 0K cma-reserved) [ 0.171232] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.171305] ftrace: allocating 50851 entries in 199 pages [ 0.202543] ftrace: allocated 199 pages with 5 groups [ 0.202881] rcu: Hierarchical RCU implementation. [ 0.202886] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.202890] Rude variant of Tasks RCU enabled. [ 0.202891] Tracing variant of Tasks RCU enabled. [ 0.202893] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.202895] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.215650] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.216098] spurious 8259A interrupt: IRQ7. [ 0.216132] Console: colour dummy device 80x25 [ 0.216155] printk: console [tty0] enabled [ 0.216205] ACPI: Core revision 20210730 [ 0.216359] APIC: Switch to symmetric I/O mode setup [ 0.216988] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.236354] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.236365] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.80 BogoMIPS (lpj=8037608) [ 0.236399] LVT offset 0 assigned for vector 0xf9 [ 0.236403] process: using AMD E400 aware idle routine [ 0.236406] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.236408] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.236414] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.236418] Spectre V2 : Mitigation: Retpolines [ 0.236420] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.236426] x86/fpu: x87 FPU will use FXSAVE [ 0.262137] Freeing SMP alternatives memory: 44K [ 0.262147] pid_max: default: 32768 minimum: 301 [ 0.262275] LSM: Security Framework initializing [ 0.262303] landlock: Up and running. [ 0.262305] Yama: becoming mindful. [ 0.262393] AppArmor: AppArmor initialized [ 0.262520] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.262553] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.372575] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (family: 0xf, model: 0x43, stepping: 0x2) [ 0.373032] Performance Events: AMD PMU driver. [ 0.373040] ... version: 0 [ 0.373042] ... bit width: 48 [ 0.373045] ... generic registers: 4 [ 0.373046] ... value mask: 0000ffffffffffff [ 0.373048] ... max period: 00007fffffffffff [ 0.373050] ... fixed-purpose events: 0 [ 0.373052] ... event mask: 000000000000000f [ 0.373189] signal: max sigframe size: 1440 [ 0.373250] rcu: Hierarchical SRCU implementation. [ 0.374252] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.374352] smp: Bringing up secondary CPUs ... [ 0.374662] x86: Booting SMP configuration: [ 0.374664] .... node #0, CPUs: #1 [ 0.004316] __common_interrupt: 1.55 No irq handler for vector [ 0.452500] smp: Brought up 1 node, 2 CPUs [ 0.452500] smpboot: Max logical packages: 1 [ 0.452500] smpboot: Total of 2 processors activated (8037.62 BogoMIPS) [ 0.453406] devtmpfs: initialized [ 0.453406] x86/mm: Memory block size: 128MB [ 0.453559] ACPI: PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes) [ 0.453657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.453679] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.453809] pinctrl core: initialized pinctrl subsystem [ 0.454058] PM: RTC time: 11:56:16, date: 2025-07-21 [ 0.454443] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.454889] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.456602] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.456868] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.457370] thermal_sys: Registered thermal governor 'fair_share' [ 0.457374] thermal_sys: Registered thermal governor 'bang_bang' [ 0.457376] thermal_sys: Registered thermal governor 'step_wise' [ 0.457377] thermal_sys: Registered thermal governor 'user_space' [ 0.457379] thermal_sys: Registered thermal governor 'power_allocator' [ 0.457404] cpuidle: using governor ladder [ 0.457411] cpuidle: using governor menu [ 0.457419] node 0 link 0: io port [9000, ffff] TOM: 00000000c0000000 aka 3072M [ 0.457426] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, efffffff] node 0 link 0: mmio [f4000000, fe02ffff] node 0 link 0: mmio [f0000000, f04fffff] TOM2: 0000000140000000 aka 5120M [ 0.457451] bus: [bus 00-04] on node 0 link 0 [ 0.457455] bus: 00 [io 0x0000-0xffff] bus: 00 [mem 0x000a0000-0x000bffff] bus: 00 [mem 0xc0000000-0xf3ffffff] bus: 00 [mem 0xf4000000-0xffffffff] bus: 00 [mem 0x140000000-0xfcffffffff] ACPI: bus type PCI registered [ 0.457552] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.457713] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.457720] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.457743] PCI: Using configuration type 1 for base access [ 0.461280] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.461438] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.464564] fbcon: Taking over console [ 0.464600] ACPI: Added _OSI(Module Device) [ 0.464602] ACPI: Added _OSI(Processor Device) [ 0.464604] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.464606] ACPI: Added _OSI(Processor Aggregator Device) [ 0.464608] ACPI: Added _OSI(Linux-Dell-Video) [ 0.464610] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.464612] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.473913] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.477702] ACPI: Interpreter enabled [ 0.477736] ACPI: PM: (supports S0 S1 S3 S4 S5) [ 0.477739] ACPI: Using IOAPIC for interrupt routing [ 0.477782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.477784] PCI: Using E820 reservations for host bridge windows [ 0.478380] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.498839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04]) [ 0.498855] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.500705] PCI host bridge to bus 0000:00 [ 0.500709] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x9000-0xffff window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] pci_bus 0000:00: root bus resource [io 0x4700-0x470b window] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80 window] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] pci_bus 0000:00: root bus resource [bus 00-04] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000 [ 0.501436] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100 [ 0.501835] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.501858] pci 0000:00:01.1: reg 0x10: [io 0xfc00-0xfc3f] pci 0000:00:01.1: reg 0x20: [io 0x1c00-0x1c3f] pci 0000:00:01.1: reg 0x24: [io 0xf400-0xf43f] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.502135] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.502562] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.502585] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff] pci 0000:00:02.0: supports D1 D2 [ 0.502613] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.502974] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.502998] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff] pci 0000:00:02.1: supports D1 D2 [ 0.503029] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.503388] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.503765] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.503788] pci 0000:00:05.0: reg 0x10: [mem 0xfe028000-0xfe02bfff] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.504162] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.504187] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.504589] pci 0000:00:07.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:07.0: reg 0x14: [io 0xec00-0xec07] pci 0000:00:07.0: supports D1 D2 [ 0.504625] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.504993] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.505011] pci 0000:00:08.0: reg 0x10: [io 0x09f0-0x09f7] pci 0000:00:08.0: reg 0x14: [io 0x0bf0-0x0bf3] pci 0000:00:08.0: reg 0x18: [io 0x0970-0x0977] pci 0000:00:08.0: reg 0x1c: [io 0x0b70-0x0b73] pci 0000:00:08.0: reg 0x20: [io 0xd800-0xd80f] pci 0000:00:08.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.505436] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.505796] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.505834] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.506191] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.506228] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.506590] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.506947] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.507304] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.507540] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.507767] pci_bus 0000:01: extended config space not accessible [ 0.507806] pci 0000:01:05.0: [168c:0013] type 00 class 0x020000 [ 0.507840] pci 0000:01:05.0: reg 0x10: [mem 0x00000000-0x0000ffff] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.507955] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref] pci 0000:00:04.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.507970] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.507973] pci 0000:00:04.0: bridge window [io 0x9000-0xffff window] (subtractive decode) [ 0.507976] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.507980] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.507983] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff window] (subtractive decode) [ 0.507986] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff window] (subtractive decode) [ 0.507989] pci 0000:00:04.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.507993] pci 0000:00:04.0: bridge window [io 0x4700-0x470b window] (subtractive decode) [ 0.507996] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80 window] (subtractive decode) [ 0.507999] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.508054] pci 0000:02:00.0: [10de:104a] type 00 class 0x030000 [ 0.508080] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] pci 0000:02:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref] pci 0000:02:00.0: reg 0x24: [io 0xbc00-0xbc7f] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] pci 0000:02:00.0: enabling Extended Tags [ 0.508126] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:09.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link) [ 0.508252] pci 0000:02:00.1: [10de:0e08] type 00 class 0x040300 [ 0.508279] pci 0000:02:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff] pci 0000:02:00.1: enabling Extended Tags [ 0.508403] pci 0000:00:09.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.520390] pci 0000:00:09.0: PCI bridge to [bus 02] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref] pci 0000:00:0b.0: PCI bridge to [bus 03] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] pci 0000:00:0c.0: PCI bridge to [bus 04] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] ACPI: PCI: Interrupt link LNK1 configured for IRQ 10 [ 0.522218] ACPI: PCI: Interrupt link LNK2 configured for IRQ 0 [ 0.522221] ACPI: PCI: Interrupt link LNK2 disabled [ 0.522328] ACPI: PCI: Interrupt link LNK3 configured for IRQ 0 [ 0.522331] ACPI: PCI: Interrupt link LNK3 disabled [ 0.522439] ACPI: PCI: Interrupt link LNK4 configured for IRQ 0 [ 0.522441] ACPI: PCI: Interrupt link LNK4 disabled [ 0.522550] ACPI: PCI: Interrupt link LNK5 configured for IRQ 11 [ 0.522659] ACPI: PCI: Interrupt link LNK6 configured for IRQ 0 [ 0.522662] ACPI: PCI: Interrupt link LNK6 disabled [ 0.522768] ACPI: PCI: Interrupt link LNK7 configured for IRQ 0 [ 0.522771] ACPI: PCI: Interrupt link LNK7 disabled [ 0.522881] ACPI: PCI: Interrupt link LNK8 configured for IRQ 5 [ 0.522989] ACPI: PCI: Interrupt link LIGP configured for IRQ 0 [ 0.522992] ACPI: PCI: Interrupt link LIGP disabled [ 0.523098] ACPI: PCI: Interrupt link LP2P configured for IRQ 0 [ 0.523100] ACPI: PCI: Interrupt link LP2P disabled [ 0.523210] ACPI: PCI: Interrupt link LUBA configured for IRQ 10 [ 0.523322] ACPI: PCI: Interrupt link LMAC configured for IRQ 5 [ 0.523432] ACPI: PCI: Interrupt link LAZA configured for IRQ 10 [ 0.523541] ACPI: PCI: Interrupt link LPMU configured for IRQ 0 [ 0.523544] ACPI: PCI: Interrupt link LPMU disabled [ 0.523652] ACPI: PCI: Interrupt link LSMB configured for IRQ 5 [ 0.523763] ACPI: PCI: Interrupt link LUB2 configured for IRQ 11 [ 0.523872] ACPI: PCI: Interrupt link LIDE configured for IRQ 0 [ 0.523875] ACPI: PCI: Interrupt link LIDE disabled [ 0.523984] ACPI: PCI: Interrupt link LSID configured for IRQ 11 [ 0.524093] ACPI: PCI: Interrupt link LFID configured for IRQ 0 [ 0.524095] ACPI: PCI: Interrupt link LFID disabled [ 0.524303] ACPI: PCI: Interrupt link APC1 configured for IRQ 0 [ 0.524306] ACPI: PCI: Interrupt link APC1 disabled [ 0.524522] ACPI: PCI: Interrupt link APC2 configured for IRQ 0 [ 0.524526] ACPI: PCI: Interrupt link APC2 disabled [ 0.524727] ACPI: PCI: Interrupt link APC3 configured for IRQ 0 [ 0.524729] ACPI: PCI: Interrupt link APC3 disabled [ 0.524929] ACPI: PCI: Interrupt link APC4 configured for IRQ 0 [ 0.524932] ACPI: PCI: Interrupt link APC4 disabled [ 0.525132] ACPI: PCI: Interrupt link APC5 configured for IRQ 0 [ 0.525135] ACPI: PCI: Interrupt link APC5 disabled [ 0.525334] ACPI: PCI: Interrupt link APC6 configured for IRQ 0 [ 0.525337] ACPI: PCI: Interrupt link APC6 disabled [ 0.525536] ACPI: PCI: Interrupt link APC7 configured for IRQ 0 [ 0.525539] ACPI: PCI: Interrupt link APC7 disabled [ 0.525738] ACPI: PCI: Interrupt link APC8 configured for IRQ 0 [ 0.525741] ACPI: PCI: Interrupt link APC8 disabled [ 0.525942] ACPI: PCI: Interrupt link AIGP configured for IRQ 0 [ 0.525944] ACPI: PCI: Interrupt link AIGP disabled [ 0.526144] ACPI: PCI: Interrupt link APCF configured for IRQ 0 [ 0.526147] ACPI: PCI: Interrupt link APCF disabled [ 0.526348] ACPI: PCI: Interrupt link APCH configured for IRQ 0 [ 0.526351] ACPI: PCI: Interrupt link APCH disabled [ 0.526560] ACPI: PCI: Interrupt link APMU configured for IRQ 0 [ 0.526563] ACPI: PCI: Interrupt link APMU disabled [ 0.526764] ACPI: PCI: Interrupt link AAZA configured for IRQ 0 [ 0.526767] ACPI: PCI: Interrupt link AAZA disabled [ 0.526966] ACPI: PCI: Interrupt link APCS configured for IRQ 0 [ 0.526969] ACPI: PCI: Interrupt link APCS disabled [ 0.527168] ACPI: PCI: Interrupt link APCL configured for IRQ 0 [ 0.527171] ACPI: PCI: Interrupt link APCL disabled [ 0.527371] ACPI: PCI: Interrupt link APCM configured for IRQ 0 [ 0.527374] ACPI: PCI: Interrupt link APCM disabled [ 0.527575] ACPI: PCI: Interrupt link APCZ configured for IRQ 0 [ 0.527578] ACPI: PCI: Interrupt link APCZ disabled [ 0.527777] ACPI: PCI: Interrupt link APSI configured for IRQ 0 [ 0.527780] ACPI: PCI: Interrupt link APSI disabled [ 0.527979] ACPI: PCI: Interrupt link APSJ configured for IRQ 0 [ 0.527982] ACPI: PCI: Interrupt link APSJ disabled [ 0.528445] iommu: Default domain type: Translated [ 0.528450] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.528865] SCSI subsystem initialized [ 0.528951] libata version 3.00 loaded. [ 0.528988] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.528988] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.528988] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.528988] vgaarb: loaded [ 0.528988] ACPI: bus type USB registered [ 0.528988] usbcore: registered new interface driver usbfs [ 0.528988] usbcore: registered new interface driver hub [ 0.528988] usbcore: registered new device driver usb [ 0.528988] pps_core: LinuxPPS API ver. 1 registered [ 0.528988] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.528988] PTP clock support registered [ 0.528988] EDAC MC: Ver: 3.0.0 [ 0.529241] NetLabel: Initializing [ 0.529245] NetLabel: domain hash size = 128 [ 0.529247] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.529298] NetLabel: unlabeled traffic allowed by default [ 0.529328] PCI: Using ACPI for IRQ routing [ 0.529871] PCI: pci_cache_line_size set to 64 bytes [ 0.529918] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff] clocksource: Switched to clocksource refined-jiffies [ 0.572799] VFS: Disk quotas dquot_6.6.0 [ 0.572848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.573159] AppArmor: AppArmor Filesystem Enabled [ 0.573201] pnp: PnP ACPI init [ 0.573574] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.573581] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.573584] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.573587] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.573590] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.573594] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.573597] system 00:00: [io 0x2000-0x207f] has been reserved [ 0.573600] system 00:00: [io 0x2080-0x20ff] has been reserved [ 0.573604] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.573608] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved [ 0.573783] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.573787] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.573791] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.574228] pnp 00:03: [dma 2] pnp 00:05: [dma 3] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.577346] system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.577351] system 00:08: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.577355] system 00:08: [mem 0xbfee0000-0xbfefffff] could not be reserved [ 0.577358] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved [ 0.577362] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.577366] system 00:08: [mem 0x00100000-0xbfedffff] could not be reserved [ 0.577370] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.577373] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.577377] system 00:08: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.577380] system 00:08: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.577384] system 00:08: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.577387] system 00:08: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.577408] pnp: PnP ACPI: found 9 devices [ 0.584764] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.584796] clocksource: Switched to clocksource acpi_pm [ 0.584937] NET: Registered PF_INET protocol family [ 0.585221] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.587179] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.587319] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.587429] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.587740] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.587888] TCP: Hash tables configured (established 32768 bind 32768) [ 0.588121] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.588195] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.588252] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.588252] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.588252] NET: Registered PF_XDP protocol family [ 0.588252] pci 0000:01:05.0: BAR 0: assigned [mem 0xfde00000-0xfde0ffff] pci 0000:01:05.0: BAR 0: error updating (0xfde00000 != 0xbde00000) [ 0.588252] pci 0000:00:04.0: PCI bridge to [bus 01] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref] pci 0000:00:09.0: PCI bridge to [bus 02] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref] pci 0000:00:0b.0: PCI bridge to [bus 03] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] pci 0000:00:0c.0: PCI bridge to [bus 04] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x9000-0xffff window] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xefffffff window] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfe02ffff window] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window] pci_bus 0000:00: resource 12 [io 0x4700-0x470b window] pci_bus 0000:00: resource 13 [io 0x1c00-0x1c80 window] pci_bus 0000:00: resource 14 [mem 0xfec80000-0xfecbffff window] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:01: resource 6 [io 0x9000-0xffff window] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df window] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window] pci_bus 0000:01: resource 9 [mem 0xc0000000-0xefffffff window] pci_bus 0000:01: resource 10 [mem 0xf4000000-0xfe02ffff window] pci_bus 0000:01: resource 11 [mem 0xfed40000-0xfed44fff window] pci_bus 0000:01: resource 12 [io 0x4700-0x470b window] pci_bus 0000:01: resource 13 [io 0x1c00-0x1c80 window] pci_bus 0000:01: resource 14 [mem 0xfec80000-0xfecbffff window] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] ACPI: \_SB_.PCI0.APCF: Enabled at IRQ 23 [ 0.612493] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x160 took 23411 usecs [ 0.612942] ACPI: \_SB_.PCI0.APCL: Enabled at IRQ 22 [ 0.613139] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613189] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613252] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613306] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613363] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613423] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613486] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613579] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0 [ 0.613591] PCI: CLS 64 bytes, default 64 [ 0.613749] Trying to unpack rootfs image as initramfs... [ 0.621004] PCI-DMA: Disabling AGP. [ 0.621138] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.621141] PCI-DMA: using GART IOMMU. [ 0.621145] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.621225] software IO TLB: tearing down default memory pool [ 0.626745] Initialise system trusted keyrings [ 0.626779] Key type blacklist registered [ 0.626913] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.630614] zbud: loaded [ 0.631347] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.631961] fuse: init (API version 7.34) [ 0.632426] integrity: Platform Keyring initialized [ 0.647749] Key type asymmetric registered [ 0.647753] Asymmetric key parser 'x509' registered [ 0.647815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.647931] io scheduler mq-deadline registered [ 0.648970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.649258] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.649300] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.649482] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.650871] ACPI: thermal: Thermal Zone [THRM] (40 C) [ 0.651200] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.671698] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.676144] Linux agpgart interface v0.103 [ 0.680419] loop: module loaded [ 0.681100] tun: Universal TUN/TAP device driver, 1.6 [ 0.681177] PPP generic driver version 2.4.2 [ 0.681273] VFIO - User Level meta-driver version: 0.3 [ 0.681482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.681500] ehci-pci: EHCI PCI platform driver [ 0.681803] ehci-pci 0000:00:02.1: EHCI Host Controller [ 0.681814] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.681827] ehci-pci 0000:00:02.1: debug port 1 [ 0.681914] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.700345] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.700481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.700486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.700489] usb usb1: Product: EHCI Host Controller [ 0.700492] usb usb1: Manufacturer: Linux 5.15.0-144-generic ehci_hcd [ 0.700494] usb usb1: SerialNumber: ... [ 0.700721] hub 1-0:1.0: USB hub found [ 0.700736] hub 1-0:1.0: 8 ports detected [ 0.701294] ehci-platform: EHCI generic platform driver [ 0.701317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.701327] ohci-pci: OHCI PCI platform driver [ 0.701604] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 0.701622] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.701680] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.766411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 0.766416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.766419] usb usb2: Product: OHCI PCI host controller [ 0.766422] usb usb2: Manufacturer: Linux 5.15.0-144-generic ohci_hcd [ 0.766424] usb usb2: SerialNumber: ... [ 0.766611] hub 2-0:1.0: USB hub found [ 0.766624] hub 2-0:1.0: 8 ports detected [ 0.767036] ohci-platform: OHCI generic platform driver [ 0.767055] uhci_hcd: USB Universal Host Controller Interface driver [ 0.767179] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.767183] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.767358] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.767495] mousedev: PS/2 mouse device common for all mice [ 0.767686] rtc_cmos 00:02: RTC can wake from S4 [ 0.768048] rtc_cmos 00:02: registered as rtc0 [ 0.768098] rtc_cmos 00:02: setting system clock to 2025-07-21T11:56:16 UTC (1753098976) [ 0.768160] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram [ 0.768178] i2c_dev: i2c /dev entries driver [ 0.768221] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.768300] device-mapper: uevent: version 1.0.3 [ 0.768456] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.768604] ledtrig-cpu: registered to indicate activity on CPUs [ 0.768668] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.768672] vesafb: scrolling: redraw [ 0.768673] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.768703] vesafb: framebuffer at 0xe7000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 0.768903] Console: switching to colour frame buffer device 80x30 [ 0.778110] fb0: VESA VGA frame buffer device [ 0.778302] drop_monitor: Initializing network drop monitor service [ 0.778687] NET: Registered PF_INET6 protocol family [ 0.796017] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.040350] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.204699] usb 1-1: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice= 0.0b [ 1.204704] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.205004] hub 1-1:1.0: USB hub found [ 1.205070] hub 1-1:1.0: 4 ports detected [ 1.600345] usb 2-4: new low-speed USB device number 2 using ohci-pci [ 1.855356] usb 2-4: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00 [ 1.855361] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.855364] usb 2-4: Product: USB-PS/2 Optical Mouse [ 1.855366] usb 2-4: Manufacturer: Logitech [ 2.056471] usb 1-1.1: new high-speed USB device number 4 using ehci-pci [ 2.187171] usb 1-1.1: New USB device found, idVendor=148f, idProduct=5372, bcdDevice= 1.01 [ 2.187182] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.187186] usb 1-1.1: Product: 802.11 n WLAN [ 2.187188] usb 1-1.1: Manufacturer: Ralink [ 2.276345] usb 1-1.4: new full-speed USB device number 5 using ehci-pci [ 2.544460] usb 1-1.4: New USB device found, idVendor=0df6, idProduct=2200, bcdDevice=19.58 [ 2.544465] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2.544468] usb 1-1.4: Product: Sitecom USB bluetooth2.0 class 2 dongle CN-512 [ 2.947620] Freeing initrd memory: 141292K [ 2.962504] Segment Routing with IPv6 [ 2.962537] In-situ OAM (IOAM) with IPv6 [ 2.962592] NET: Registered PF_PACKET protocol family [ 2.962702] Key type dns_resolver registered [ 2.963105] IPI shorthand broadcast: enabled [ 2.963343] registered taskstats version 1 [ 2.963469] Loading compiled-in X.509 certificates [ 2.965131] Loaded X.509 cert 'Build time autogenerated kernel key: 40990c4841cb5dde8921588f40796ac9811dad52' [ 2.966551] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing 2025 Kmod: d541cef61dc7e793b7eb7e899970a2eef0b5dc8c' [ 2.967992] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 2.969461] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 2.969465] blacklist: Loading compiled-in revocation X.509 certificates [ 2.969504] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 2.969551] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 2.969589] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 2.969631] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 2.969666] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 2.969702] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 2.969759] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 2.969802] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 2.970091] zswap: loaded using pool lzo/zbud [ 2.970551] Key type .fscrypt registered [ 2.970554] Key type fscrypt-provisioning registered [ 2.978207] Key type encrypted registered [ 2.978219] AppArmor: AppArmor sha1 policy hashing enabled [ 2.978243] ima: No TPM chip found, activating TPM-bypass! [ 2.978254] Loading compiled-in module X.509 certificates [ 2.979715] Loaded X.509 cert 'Build time autogenerated kernel key: 40990c4841cb5dde8921588f40796ac9811dad52' [ 2.979719] ima: Allocated hash algorithm: sha1 [ 2.979730] ima: No architecture policies found [ 2.979759] evm: Initialising EVM extended attributes: [ 2.979761] evm: security.selinux [ 2.979763] evm: security.SMACK64 [ 2.979765] evm: security.SMACK64EXEC [ 2.979766] evm: security.SMACK64TRANSMUTE [ 2.979767] evm: security.SMACK64MMAP [ 2.979769] evm: security.apparmor [ 2.979770] evm: security.ima [ 2.979772] evm: security.capability [ 2.979773] evm: HMAC attrs: 0x1 [ 2.980353] PM: Magic number: 1:641:934 [ 2.980858] powernow_k8: fid 0xc (2000 MHz), vid 0xe [ 2.980862] powernow_k8: fid 0xa (1800 MHz), vid 0x10 [ 2.980864] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 2.981007] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00) [ 2.981113] RAS: Correctable Errors collector initialized. [ 2.981134] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 2.981212] clk: Disabling unused clocks [ 2.984243] Freeing unused decrypted memory: 2036K [ 2.986296] Freeing unused kernel image (initmem) memory: 3284K [ 2.986305] Write protecting the kernel read-only data: 30720k [ 2.987692] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.988544] Freeing unused kernel image (rodata/data gap) memory: 1300K [ 3.080064] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.080214] Run /init as init process [ 3.080338] with arguments: [ 3.080340] /init [ 3.080342] splash [ 3.080344] with environment: [ 3.080345] HOME=/ [ 3.080347] TERM=linux [ 3.080348] BOOT_IMAGE=/boot/vmlinuz-5.15.0-144-generic [ 3.312650] Floppy drive(s): fd0 is 1.44M [ 3.317795] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 3.317922] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 3.343166] pata_amd 0000:00:06.0: version 0.4.1 [ 3.345207] hid: raw HID events driver (C) Jiri Kosina [ 3.345444] IPMI message handler: version 39.2 [ 3.345638] sata_nv 0000:00:08.0: version 3.5 [ 3.346110] ACPI: \_SB_.PCI0.APSI: Enabled at IRQ 21 [ 3.347166] FDC 0 is a post-1991 82077 [ 3.349130] ipmi device interface [ 3.352673] scsi host0: pata_amd [ 3.362049] scsi host1: sata_nv [ 3.362204] scsi host2: pata_amd [ 3.362277] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 3.362281] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 3.362299] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.362862] ACPI: \_SB_.PCI0.APCH: Enabled at IRQ 20 [ 3.365957] usbcore: registered new interface driver usbhid [ 3.365965] usbhid: USB HID core driver [ 3.369853] scsi host3: sata_nv [ 3.369969] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21 [ 3.369974] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21 [ 3.540505] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66 [ 3.571173] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5 [ 3.636779] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.636784] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.666705] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.666965] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.840360] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.860636] ata3.00: ATA-8: SAMSUNG HD503HI, 1AJ100E4, max UDMA/133 [ 3.860640] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.880869] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 6DD280DF5145D70CE4B142A682043F5A [ 3.880875] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 3.881721] ata3.00: configured for UDMA/133 [ 3.881902] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD503HI 00E4 PQ: 0 ANSI: 5 [ 3.882372] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.882393] sd 1:0:0:0: [sda] Write Protect is off [ 3.882396] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.882428] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.882627] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.900013] sda: sda1 sda2 [ 3.900523] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.356375] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.376425] ata4.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-38, max UDMA7 [ 4.376430] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.396417] ata4.00: configured for UDMA/133 [ 4.396911] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD160JJ/ 0-38 PQ: 0 ANSI: 5 [ 4.397536] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 4.398957] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 4.398996] sd 3:0:0:0: [sdb] Write Protect is off [ 4.399003] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.399069] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.420156] sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3 [ 4.421329] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.436749] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046D:C03E.0001/input/input3 [ 4.437711] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4/input0 [ 4.441108] forcedeth 0000:00:07.0 enp0s7: renamed from eth0 [ 4.935402] nvidia: loading out-of-tree module taints kernel. [ 4.935431] nvidia: module license 'NVIDIA' taints kernel. [ 4.935433] Disabling lock debugging due to kernel taint [ 4.971851] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.995066] nvidia-nvlink: Nvlink Core is being initialized, major device number 236 [ 4.996764] ACPI: \_SB_.PCI0.APC8: Enabled at IRQ 16 [ 4.996825] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 4.997443] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.157 Wed Oct 12 09:19:07 UTC 2022 (using threaded interrupts) [ 5.030731] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.157 Wed Oct 12 09:15:25 UTC 2022 [ 5.034484] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver [ 5.034491] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0 [ 5.949262] random: lvm: uninitialized urandom read (4 bytes read) [ 6.073913] random: lvm: uninitialized urandom read (4 bytes read) [ 6.276336] raid6: sse2x4 gen() 1822 MB/s [ 6.344336] raid6: sse2x4 xor() 647 MB/s [ 6.412332] raid6: sse2x2 gen() 1999 MB/s [ 6.480329] raid6: sse2x2 xor() 1303 MB/s [ 6.548337] raid6: sse2x1 gen() 1667 MB/s [ 6.616331] raid6: sse2x1 xor() 1248 MB/s [ 6.616333] raid6: using algorithm sse2x2 gen() 1999 MB/s [ 6.616337] raid6: .... xor() 1303 MB/s, rmw enabled [ 6.616337] raid6: using intx1 recovery algorithm [ 6.625189] xor: measuring software checksum speed [ 6.625683] prefetch64-sse : 6765 MB/sec [ 6.626177] generic_sse : 6730 MB/sec [ 6.626179] xor: using function: prefetch64-sse (6765 MB/sec) [ 6.737612] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 7.144353] floppy0: disk absent or changed during operation [ 7.144361] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 7.144964] floppy0: disk absent or changed during operation [ 7.144967] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 7.145193] Buffer I/O error on dev fd0, logical block 0, async page read [ 8.884503] random: crng init done [ 11.558722] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 19.947805] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 20.686208] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 20.754072] lp: driver loaded but no devices found [ 20.867760] ppdev: user-space parallel port driver [ 21.002311] parport_pc 00:05: reported by Plug and Play ACPI [ 21.004418] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). [ 23.893553] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 25.768761] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.769469] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.769915] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 26.619273] kvm: Nested Virtualization enabled [ 26.619273] SVM: kvm: Nested Paging disabled [ 26.924234] MCE: In-kernel MCE decoding enabled. [ 27.273901] Bluetooth: Core ver 2.22 [ 27.275392] NET: Registered PF_BLUETOOTH protocol family [ 27.275392] Bluetooth: HCI device and connection manager initialized [ 27.275392] Bluetooth: HCI socket layer initialized [ 27.275392] Bluetooth: L2CAP socket layer initialized [ 27.275392] Bluetooth: SCO socket layer initialized [ 27.528630] ath5k 0000:01:05.0: enabling device (0000 -> 0002) [ 27.529128] ACPI: \_SB_.PCI0.APC1: Enabled at IRQ 16 [ 27.529204] ath5k 0000:01:05.0: registered as 'phy0' [ 27.532641] ath5k: phy0: Couldn't identify radio revision. [ 28.217371] usbcore: registered new interface driver btusb [ 28.268398] Bluetooth: hci0: unexpected event for opcode 0x0000 [ 28.476351] usb 1-1.1: reset high-speed USB device number 4 using ehci-pci [ 28.598541] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 28.628073] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5372 detected [ 28.628392] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 28.635286] usbcore: registered new interface driver rt2800usb [ 28.783253] rt2800usb 1-1.1:1.0 wlx9cefd5fd78eb: renamed from wlan0 [ 28.866868] ACPI: \_SB_.PCI0.AAZA: Enabled at IRQ 23 [ 28.866885] snd_hda_intel 0000:00:05.0: Disabling MSI [ 28.867492] ACPI: \_SB_.PCI0.APC5: Enabled at IRQ 16 [ 28.867501] snd_hda_intel 0000:02:00.1: Disabling MSI [ 28.867515] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 28.993313] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input4 [ 28.993446] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input5 [ 29.309464] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC660-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 29.309475] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 29.309479] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 29.309482] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 29.309484] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 29.309487] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 29.309490] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 29.309492] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 29.309494] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c [ 29.336537] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 29.336658] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 29.336753] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 29.336857] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 29.337552] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 31.221666] ZFS: Loaded module v2.1.5-1ubuntu6~22.04.5, ZFS pool version 5000, ZFS filesystem version 5 [ 41.540839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.540847] Bluetooth: BNEP filters: protocol multicast [ 41.540854] Bluetooth: BNEP socket layer initialized [ 46.136727] forcedeth 0000:00:07.0 enp0s7: MSI enabled [ 46.136882] forcedeth 0000:00:07.0 enp0s7: no link during initialization [ 46.149436] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 46.362758] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 49.649362] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 49.669191] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 49.716985] wlx9cefd5fd78eb: authenticated [ 49.720376] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 49.748398] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=2) [ 49.759111] wlx9cefd5fd78eb: associated [ 49.791518] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 49.917765] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 67.050806] Bluetooth: RFCOMM TTY layer initialized [ 67.050821] Bluetooth: RFCOMM socket layer initialized [ 67.050837] Bluetooth: RFCOMM ver 1.11 [ 1931.089863] forcedeth 0000:00:07.0 enp0s7: link up [ 1931.090765] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready [ 1938.228572] forcedeth 0000:00:07.0 enp0s7: link down [ 1946.320512] forcedeth 0000:00:07.0 enp0s7: link up [ 1953.082769] forcedeth 0000:00:07.0 enp0s7: link down [ 3639.963935] forcedeth 0000:00:07.0 enp0s7: link up [ 3640.288971] forcedeth 0000:00:07.0 enp0s7: link down [ 3647.172872] forcedeth 0000:00:07.0 enp0s7: link up [ 3647.674223] forcedeth 0000:00:07.0 enp0s7: link down [ 3651.183726] forcedeth 0000:00:07.0 enp0s7: link up [ 3651.281964] forcedeth 0000:00:07.0 enp0s7: link down [ 3660.175562] forcedeth 0000:00:07.0 enp0s7: link up [ 3662.662681] forcedeth 0000:00:07.0 enp0s7: link down [ 3685.315382] forcedeth 0000:00:07.0 enp0s7: link up [ 3686.015022] forcedeth 0000:00:07.0 enp0s7: link down [ 3688.932961] forcedeth 0000:00:07.0 enp0s7: link up [ 3689.105196] forcedeth 0000:00:07.0 enp0s7: link down [ 3695.118768] forcedeth 0000:00:07.0 enp0s7: link up [ 3695.216279] forcedeth 0000:00:07.0 enp0s7: link down [ 3702.407268] forcedeth 0000:00:07.0 enp0s7: link up [ 3702.874216] forcedeth 0000:00:07.0 enp0s7: link down [ 3825.013328] forcedeth 0000:00:07.0 enp0s7: link up [ 3826.016864] forcedeth 0000:00:07.0 enp0s7: link down [ 3846.273844] forcedeth 0000:00:07.0 enp0s7: link up [ 3849.602920] forcedeth 0000:00:07.0 enp0s7: link down [ 3854.898311] forcedeth 0000:00:07.0 enp0s7: link up [ 3855.784702] forcedeth 0000:00:07.0 enp0s7: link down [ 3872.462171] forcedeth 0000:00:07.0 enp0s7: link up [ 3873.077229] forcedeth 0000:00:07.0 enp0s7: link down [ 4148.864345] usb 1-8: new high-speed USB device number 7 using ehci-pci [ 4149.029174] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4149.029185] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4149.029188] usb 1-8: Product: GENERAL - UVC [ 4149.029191] usb 1-8: Manufacturer: GENERAL [ 4149.284549] mc: Linux media interface: v0.10 [ 4149.326046] videodev: Linux video capture interface: v2.00 [ 4149.394903] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4149.395144] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4149.395269] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4149.395394] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4149.395648] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4149.396730] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input11 [ 4149.398894] usbcore: registered new interface driver uvcvideo [ 4159.078724] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [ 4166.826568] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 4166.848432] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4166.855511] wlx9cefd5fd78eb: authenticated [ 4166.856544] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4166.909018] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=3) [ 4166.918355] wlx9cefd5fd78eb: associated [ 4166.989594] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 4167.078654] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 4285.630714] usb 1-8: USB disconnect, device number 7 [ 4291.276361] usb 1-8: new high-speed USB device number 9 using ehci-pci [ 4291.433300] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4291.433310] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4291.433313] usb 1-8: Product: GENERAL - UVC [ 4291.433316] usb 1-8: Manufacturer: GENERAL [ 4291.434175] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4291.434420] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4291.434544] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4291.434671] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4291.434921] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4291.435718] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input12 [ 4307.294842] usb 1-8: USB disconnect, device number 9 [ 4312.940339] usb 1-8: new high-speed USB device number 11 using ehci-pci [ 4313.097282] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4313.097291] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4313.097294] usb 1-8: Product: GENERAL - UVC [ 4313.097296] usb 1-8: Manufacturer: GENERAL [ 4313.098281] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4313.098526] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4313.098650] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4313.098775] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4313.099026] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4313.099823] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input13 [ 4317.454856] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [ 4319.966565] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [ 4320.004896] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [ 4320.047035] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 2/3) [ 4320.084287] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 3/3) [ 4320.141779] wlx9cefd5fd78eb: authentication with D18392DC853110343541A98E17A73CB3 timed out [ 4335.130090] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 4335.130100] sr 0:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Medium not present [ 4335.130109] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 4335.130112] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 4335.130234] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130244] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130254] Buffer I/O error on dev sr0, logical block 0, async page read [ 4335.130278] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130281] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130286] Buffer I/O error on dev sr0, logical block 1, async page read [ 4335.130306] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130309] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130314] Buffer I/O error on dev sr0, logical block 2, async page read [ 4335.130332] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130335] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130339] Buffer I/O error on dev sr0, logical block 3, async page read [ 4335.130358] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130361] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130365] Buffer I/O error on dev sr0, logical block 4, async page read [ 4335.130384] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130386] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130391] Buffer I/O error on dev sr0, logical block 5, async page read [ 4335.130410] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130412] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130417] Buffer I/O error on dev sr0, logical block 6, async page read [ 4335.130437] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4335.130439] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4335.130444] Buffer I/O error on dev sr0, logical block 7, async page read [ 4344.372187] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 4344.394258] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4344.400736] wlx9cefd5fd78eb: authenticated [ 4344.404371] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4344.499856] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=4) [ 4344.510056] wlx9cefd5fd78eb: associated [ 4344.557740] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 4344.557940] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 4357.218912] usb 1-8: USB disconnect, device number 11 [ 4362.864353] usb 1-8: new high-speed USB device number 13 using ehci-pci [ 4363.025243] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4363.025253] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4363.025257] usb 1-8: Product: GENERAL - UVC [ 4363.025259] usb 1-8: Manufacturer: GENERAL [ 4363.025990] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4363.026236] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4363.026358] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4363.026483] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4363.026736] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4363.027352] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input14 [ 4366.829659] usb 1-8: USB disconnect, device number 13 [ 4372.472339] usb 1-8: new high-speed USB device number 15 using ehci-pci [ 4372.629169] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4372.629178] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4372.629181] usb 1-8: Product: GENERAL - UVC [ 4372.629183] usb 1-8: Manufacturer: GENERAL [ 4372.630422] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4372.630667] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4372.630791] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4372.630917] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4372.631169] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4372.631779] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input15 [ 4382.578156] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 4382.578167] sr 0:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Medium not present [ 4382.578176] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 4382.578179] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 4382.578259] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578270] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578280] Buffer I/O error on dev sr0, logical block 0, async page read [ 4382.578308] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578311] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578316] Buffer I/O error on dev sr0, logical block 1, async page read [ 4382.578338] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578341] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578346] Buffer I/O error on dev sr0, logical block 2, async page read [ 4382.578367] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578370] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578375] Buffer I/O error on dev sr0, logical block 3, async page read [ 4382.578396] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578399] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578404] Buffer I/O error on dev sr0, logical block 4, async page read [ 4382.578425] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578427] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578432] Buffer I/O error on dev sr0, logical block 5, async page read [ 4382.578453] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578456] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578461] Buffer I/O error on dev sr0, logical block 6, async page read [ 4382.578483] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4382.578486] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4382.578491] Buffer I/O error on dev sr0, logical block 7, async page read [ 4390.077863] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [ 4401.795980] usb 1-8: USB disconnect, device number 15 [ 4407.592343] usb 1-8: new high-speed USB device number 17 using ehci-pci [ 4407.749214] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4407.749222] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4407.749226] usb 1-8: Product: GENERAL - UVC [ 4407.749228] usb 1-8: Manufacturer: GENERAL [ 4407.750467] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4407.750711] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4407.750835] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4407.750960] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4407.751211] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4407.751819] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input16 [ 4412.562075] usb 1-8: USB disconnect, device number 17 [ 4418.204353] usb 1-8: new high-speed USB device number 19 using ehci-pci [ 4418.361202] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4418.361213] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4418.361216] usb 1-8: Product: GENERAL - UVC [ 4418.361219] usb 1-8: Manufacturer: GENERAL [ 4418.362579] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4418.362824] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4418.362949] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4418.363074] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4418.363325] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4418.364124] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input17 [ 4418.992367] usb 1-8: USB disconnect, device number 19 [ 4419.304344] usb 1-8: new high-speed USB device number 20 using ehci-pci [ 4419.856342] usb 1-8: device not accepting address 20, error -71 [ 4434.022286] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [ 4434.060639] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [ 4434.070598] wlx9cefd5fd78eb: authenticated [ 4434.073110] wlx9cefd5fd78eb: associate with D18392DC853110343541A98E17A73CB3 (try 1/3) [ 4434.104613] wlx9cefd5fd78eb: RX AssocResp from D18392DC853110343541A98E17A73CB3 (capab=0x401 status=0 aid=1) [ 4434.113910] wlx9cefd5fd78eb: associated [ 4434.113976] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 4465.421987] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 4465.421998] sr 0:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Medium not present [ 4465.422007] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 4465.422010] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 4465.422425] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422436] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422446] Buffer I/O error on dev sr0, logical block 0, async page read [ 4465.422497] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422501] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422507] Buffer I/O error on dev sr0, logical block 1, async page read [ 4465.422672] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422676] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422682] Buffer I/O error on dev sr0, logical block 2, async page read [ 4465.422717] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422720] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422725] Buffer I/O error on dev sr0, logical block 3, async page read [ 4465.422759] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422762] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422767] Buffer I/O error on dev sr0, logical block 4, async page read [ 4465.422831] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422834] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422839] Buffer I/O error on dev sr0, logical block 5, async page read [ 4465.422874] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422877] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422882] Buffer I/O error on dev sr0, logical block 6, async page read [ 4465.422929] sr 0:0:0:0: [sr0] tag#0 unaligned transfer [ 4465.422932] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 4465.422937] Buffer I/O error on dev sr0, logical block 7, async page read [ 4530.325376] wlx9cefd5fd78eb: deauthenticating from D18392DC853110343541A98E17A73CB3 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4532.882356] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 4532.927665] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4532.936163] wlx9cefd5fd78eb: authenticated [ 4532.940384] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 4532.997907] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=5) [ 4533.009843] wlx9cefd5fd78eb: associated [ 4533.065810] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 4533.066038] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 4590.732347] usb 1-8: new high-speed USB device number 23 using ehci-pci [ 4590.889326] usb 1-8: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [ 4590.889337] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4590.889340] usb 1-8: Product: GENERAL - UVC [ 4590.889343] usb 1-8: Manufacturer: GENERAL [ 4590.890343] usb 1-8: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [ 4590.890588] usb 1-8: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [ 4590.890713] usb 1-8: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [ 4590.890838] usb 1-8: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [ 4590.891089] usb 1-8: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4590.891697] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0/input/input18 [ 4595.383805] usb 1-8: USB disconnect, device number 23 [ 4665.579246] perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 6176.101069] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [ 6178.678539] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 6178.715660] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 6178.721162] wlx9cefd5fd78eb: authenticated [ 6178.728380] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 6178.774268] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=6) [ 6178.783740] wlx9cefd5fd78eb: associated [ 6178.849124] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 6178.865782] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [ 7352.196352] usb 2-7: new full-speed USB device number 3 using ohci-pci [ 7352.392354] usb 2-7: device descriptor read/64, error -62 [ 7352.696377] usb 2-7: device descriptor read/64, error -62 [ 7352.992357] usb 2-7: new full-speed USB device number 4 using ohci-pci [ 7353.192367] usb 2-7: device descriptor read/64, error -62 [ 7353.496394] usb 2-7: device descriptor read/64, error -62 [ 7353.608392] usb usb2-port7: attempt power cycle [ 7354.112365] usb 2-7: new full-speed USB device number 5 using ohci-pci [ 7354.528364] usb 2-7: device not accepting address 5, error -62 [ 7354.720349] usb 2-7: new full-speed USB device number 6 using ohci-pci [ 7355.136356] usb 2-7: device not accepting address 6, error -62 [ 7355.136393] usb usb2-port7: unable to enumerate USB device [ 7497.730322] perf: interrupt took too long (3159 > 3151), lowering kernel.perf_event_max_sample_rate to 63250 [ 9021.236347] ieee80211 phy1: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 9023.264352] ieee80211 phy1: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 9023.872495] ieee80211 phy1: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 9032.136611] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [ 9032.156396] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 9032.264355] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 2/3) [ 9032.267940] wlx9cefd5fd78eb: authenticated [ 9032.272365] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [ 9032.296443] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=7) [ 9032.306409] wlx9cefd5fd78eb: associated [ 9032.358151] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [ 9457.692819] perf: interrupt took too long (3955 > 3948), lowering kernel.perf_event_max_sample_rate to 50500 [10008.352394] usb 1-1.3: new high-speed USB device number 26 using ehci-pci [10008.461236] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10008.461248] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10008.461251] usb 1-1.3: Product: GENERAL - UVC [10008.461254] usb 1-1.3: Manufacturer: GENERAL [10008.462363] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10008.462607] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10008.462732] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10008.462856] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10008.463109] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10008.463830] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input19 [10041.149752] usb 1-1.3: USB disconnect, device number 26 [10052.900370] usb 1-1.3: new high-speed USB device number 28 using ehci-pci [10053.009249] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10053.009260] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10053.009263] usb 1-1.3: Product: GENERAL - UVC [10053.009266] usb 1-1.3: Manufacturer: GENERAL [10053.011403] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10053.011622] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10053.011737] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10053.011846] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10053.012377] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10053.013039] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input20 [10090.294310] usb 1-1.3: USB disconnect, device number 28 [10102.292372] usb 1-1.3: new high-speed USB device number 30 using ehci-pci [10102.401295] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10102.401305] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10102.401308] usb 1-1.3: Product: GENERAL - UVC [10102.401311] usb 1-1.3: Manufacturer: GENERAL [10102.402669] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10102.402914] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10102.403039] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10102.403164] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10102.403416] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10102.404029] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input21 [10119.221008] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [10127.668027] usb 1-1.3: USB disconnect, device number 30 [10138.128349] usb 1-1.3: new high-speed USB device number 32 using ehci-pci [10138.237259] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10138.237269] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10138.237272] usb 1-1.3: Product: GENERAL - UVC [10138.237275] usb 1-1.3: Manufacturer: GENERAL [10138.238512] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10138.238757] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10138.238883] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10138.239006] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10138.239258] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10138.240019] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input22 [10142.514426] usb 1-1.3: USB disconnect, device number 32 [10148.112350] usb 1-1.3: new high-speed USB device number 34 using ehci-pci [10148.221188] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10148.221195] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10148.221198] usb 1-1.3: Product: GENERAL - UVC [10148.221201] usb 1-1.3: Manufacturer: GENERAL [10148.222564] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10148.222809] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10148.222934] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10148.223059] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10148.223310] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10148.223929] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input23 [10154.033196] usb 1-1.3: USB disconnect, device number 34 [10163.055733] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [10163.075558] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [10163.087256] wlx9cefd5fd78eb: authenticated [10163.100374] wlx9cefd5fd78eb: associate with D18392DC853110343541A98E17A73CB3 (try 1/3) [10163.129421] wlx9cefd5fd78eb: RX AssocResp from D18392DC853110343541A98E17A73CB3 (capab=0x401 status=0 aid=1) [10163.136745] wlx9cefd5fd78eb: associated [10163.137154] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10252.802328] wlx9cefd5fd78eb: deauthenticating from D18392DC853110343541A98E17A73CB3 by local choice (Reason: 3=DEAUTH_LEAVING) [10255.230366] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [10255.269642] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [10255.297746] wlx9cefd5fd78eb: authenticated [10255.300491] wlx9cefd5fd78eb: associate with D18392DC853110343541A98E17A73CB3 (try 1/3) [10255.330087] wlx9cefd5fd78eb: RX AssocResp from D18392DC853110343541A98E17A73CB3 (capab=0x401 status=0 aid=1) [10255.337525] wlx9cefd5fd78eb: associated [10255.338005] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10257.025148] wlx9cefd5fd78eb: deauthenticating from D18392DC853110343541A98E17A73CB3 by local choice (Reason: 3=DEAUTH_LEAVING) [10257.222282] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [10257.240079] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [10257.268363] wlx9cefd5fd78eb: authenticated [10257.272386] wlx9cefd5fd78eb: associate with D18392DC853110343541A98E17A73CB3 (try 1/3) [10257.301786] wlx9cefd5fd78eb: RX AssocResp from D18392DC853110343541A98E17A73CB3 (capab=0x401 status=0 aid=1) [10257.309003] wlx9cefd5fd78eb: associated [10257.309763] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10263.963240] wlx9cefd5fd78eb: deauthenticating from D18392DC853110343541A98E17A73CB3 by local choice (Reason: 3=DEAUTH_LEAVING) [10266.375544] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [10266.410552] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [10266.439393] wlx9cefd5fd78eb: authenticated [10266.440369] wlx9cefd5fd78eb: associate with D18392DC853110343541A98E17A73CB3 (try 1/3) [10266.470887] wlx9cefd5fd78eb: RX AssocResp from D18392DC853110343541A98E17A73CB3 (capab=0x401 status=0 aid=1) [10266.478616] wlx9cefd5fd78eb: associated [10266.480903] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10292.248505] wlx9cefd5fd78eb: deauthenticated from D18392DC853110343541A98E17A73CB3 (Reason: 2=PREV_AUTH_NOT_VALID) [10293.685811] wlx9cefd5fd78eb: authenticate with D18392DC853110343541A98E17A73CB3 [10293.721016] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 1/3) [10293.746963] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 2/3) [10293.772348] usb 1-1.3: new high-speed USB device number 36 using ehci-pci [10293.795461] wlx9cefd5fd78eb: send auth to D18392DC853110343541A98E17A73CB3 (try 3/3) [10293.832712] wlx9cefd5fd78eb: authentication with D18392DC853110343541A98E17A73CB3 timed out [10293.889304] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10293.889314] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10293.889318] usb 1-1.3: Product: GENERAL - UVC [10293.889320] usb 1-1.3: Manufacturer: GENERAL [10293.889930] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10293.890174] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10293.890299] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10293.890424] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10293.890676] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10293.891282] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input24 [10323.577355] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [10323.598286] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [10323.602394] wlx9cefd5fd78eb: authenticated [10323.608368] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [10323.671941] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=8) [10323.681851] wlx9cefd5fd78eb: associated [10323.729752] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10324.061395] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [10455.748570] usb 1-1.3: Failed to query (GET_DEF) UVC control 5 on unit 5: 0 (exp. 1). [10626.976913] usb 1-1: USB disconnect, device number 2 [10626.976925] usb 1-1.1: USB disconnect, device number 4 [10626.979792] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10626.983798] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10626.987865] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10626.991859] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10626.992382] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING) [10626.995713] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10627.032899] usb 1-1.3: USB disconnect, device number 36 [10627.072869] usb 1-1.4: USB disconnect, device number 5 [10627.344354] usb 1-1: new high-speed USB device number 37 using ehci-pci [10627.504826] usb 1-1: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice= 0.0b [10627.504836] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [10627.505253] hub 1-1:1.0: USB hub found [10627.505445] hub 1-1:1.0: 4 ports detected [10627.792444] usb 1-1.1: new high-speed USB device number 38 using ehci-pci [10627.922916] usb 1-1.1: New USB device found, idVendor=148f, idProduct=5372, bcdDevice= 1.01 [10627.922925] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10627.922929] usb 1-1.1: Product: 802.11 n WLAN [10627.922932] usb 1-1.1: Manufacturer: Ralink [10628.016511] usb 1-1.1: reset high-speed USB device number 38 using ehci-pci [10628.138026] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [10628.179021] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5372 detected [10628.179298] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [10628.260368] usb 1-1.4: new full-speed USB device number 39 using ehci-pci [10628.529248] usb 1-1.4: New USB device found, idVendor=0df6, idProduct=2200, bcdDevice=19.58 [10628.529257] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [10628.529261] usb 1-1.4: Product: Sitecom USB bluetooth2.0 class 2 dongle CN-512 [10630.148666] rt2800usb 1-1.1:1.0 wlx9cefd5fd78eb: renamed from wlan0 [10632.049394] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [10632.219960] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [10635.234071] wlx9cefd5fd78eb: authenticate with 6AAAB188AE55F580F88FD39B42F0FB9A [10635.255927] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [10635.360584] wlx9cefd5fd78eb: send auth to 6AAAB188AE55F580F88FD39B42F0FB9A (try 2/3) [10635.365641] wlx9cefd5fd78eb: authenticated [10635.368415] wlx9cefd5fd78eb: associate with 6AAAB188AE55F580F88FD39B42F0FB9A (try 1/3) [10635.401024] wlx9cefd5fd78eb: RX AssocResp from 6AAAB188AE55F580F88FD39B42F0FB9A (capab=0x1431 status=0 aid=9) [10635.413855] wlx9cefd5fd78eb: associated [10635.501774] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cefd5fd78eb: link becomes ready [10635.565769] wlx9cefd5fd78eb: Limiting TX power to 23 (23 - 0) dBm as advertised by 6AAAB188AE55F580F88FD39B42F0FB9A [10674.680347] usb 1-1.3: new high-speed USB device number 41 using ehci-pci [10674.789241] usb 1-1.3: New USB device found, idVendor=1b3f, idProduct=2002, bcdDevice= 1.00 [10674.789251] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10674.789255] usb 1-1.3: Product: GENERAL - UVC [10674.789258] usb 1-1.3: Manufacturer: GENERAL [10674.790819] usb 1-1.3: Found UVC 1.00 device GENERAL - UVC (1b3f:2002) [10674.791224] usb 1-1.3: Failed to query (GET_INFO) UVC control 3 on unit 5: 0 (exp. 1). [10674.793082] usb 1-1.3: Failed to query (GET_INFO) UVC control 6 on unit 5: 0 (exp. 1). [10674.793198] usb 1-1.3: Failed to query (GET_INFO) UVC control 5 on unit 5: 0 (exp. 1). [10674.794246] usb 1-1.3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [10674.794917] input: GENERAL - UVC : GENERAL - UVC as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input25 [10674.910488] usb 1-1.3: Failed to query (GET_DEF) UVC control 5 on unit 5: 0 (exp. 1). [10795.538125] usb 1-1-port3: disabled by hub (EMI?), re-enabling... [10795.538249] usb 1-1.3: USB disconnect, device number 41 [10795.553051] uvcvideo 1-1.3:1.1: Failed to resubmit video URB (-19). [10880.306065] wlx9cefd5fd78eb: deauthenticating from 6AAAB188AE55F580F88FD39B42F0FB9A by local choice (Reason: 3=DEAUTH_LEAVING)