Probe #d69e645045 of HP Elite x2 1013 G3
Log: dmesg.1
[ 1.386016] device-mapper: uevent: version 1.0.3
[ 1.386089] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX
[ 1.408020] xor: automatically using best checksumming function avx
[ 1.429014] raid6: avx2x4 gen() 14714 MB/s
[ 1.446010] raid6: avx2x2 gen() 16672 MB/s
[ 1.463007] raid6: avx2x1 gen() 15616 MB/s
[ 1.463025] raid6: using algorithm avx2x2 gen() 16672 MB/s
[ 1.480010] raid6: .... xor() 10593 MB/s, rmw enabled
[ 1.480031] raid6: using avx2x2 recovery algorithm
[ 1.541014] tsc: Refined TSC clocksource calibration: 1799.998 MHz
[ 1.541078] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f227af07c, max_idle_ns: 440795246167 ns
[ 1.541091] clocksource: Switched to clocksource tsc
[ 1.589013] Btrfs loaded, zoned=yes, fsverity=yes
[ 1.619017] ACPI: bus type USB registered
[ 1.619089] usbcore: registered new interface driver usbfs
[ 1.619102] usbcore: registered new interface driver hub
[ 1.619114] usbcore: registered new device driver usb
[ 1.966026] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 1.967034] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 1.976023] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 1.979024] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 1.988031] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_7D1-911A-5F14-78EF-632E1637A197 has zero instances
[ 1.991080] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_362-801B-1C3D-2638-F8882CF5E53F has zero instances
[ 1.992023] ACPI: battery: Slot [BAT0] (battery present)
[ 1.996043] ACPI: button: Power Button [PWRF] intel_ish_ipc 0000:00:13.0: enabling device (0000 -> 0002)
[ 2.789265] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.789464] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.789636] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.789815] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.789991] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
[ 2.790163] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 2.790330] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.790630] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
[ 2.790855] ACPI: bus type drm_connector registered
[ 2.790870] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 2.791181] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.791414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.791625] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.791847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.792148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.792385] usb usb1: Product: xHCI Host Controller
[ 2.792604] usb usb1: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd
[ 2.792817] usb usb1: SerialNumber: ...
[ 2.793044] hub 1-0:1.0: USB hub found
[ 2.793248] hub 1-0:1.0: 12 ports detected
[ 2.793447] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 2.793648] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.793846] usb usb2: Product: xHCI Host Controller
[ 2.794044] usb usb2: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd
[ 2.794242] usb usb2: SerialNumber: ...
[ 2.794470] hub 2-0:1.0: USB hub found
[ 2.794674] hub 2-0:1.0: 6 ports detected
[ 2.794860] hid: raw HID events driver (C) Jiri Kosina
[ 2.794876] cryptd: max_cpu_qlen set to 1000
[ 2.794889] Linux agpgart interface v0.103
[ 2.794902] AES CTR mode by8 optimization enabled
[ 2.794916] nvme nvme0: pci function 0000:6d:00.0
[ 2.795082] nvme nvme0: 8/0/0 default/read/poll queues
[ 2.795229] nvme0n1: p1 p2 p3
[ 2.795243] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 2.795478] usb 1-4: New USB device found, idVendor=044e, idProduct=1221, bcdDevice= 6.12
[ 2.795682] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.795877] usb 1-4: Product: Alps Touchpad
[ 2.796074] usb 1-4: Manufacturer: Alps
[ 2.796267] i915 0000:00:02.0: [drm] Found KABYLAKE (device ID 5917) display version 9.00 stepping C0
[ 2.796459] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.796632] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.796801] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.796967] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.797229] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 2.797430] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=...
[ 2.797626] usbcore: registered new interface driver usbhid
[ 2.797640] usbhid: USB HID core driver
[ 2.797652] usbcore: registered new interface driver usbmouse
[ 2.797664] input: Alps Alps Touchpad Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input13
[ 2.797681] input: Alps Alps Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input14
[ 2.797694] input: Alps Alps Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input15
[ 2.797706] hid-generic 0003:044E:1221.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Alps Alps Touchpad] on usb-0000:00:14.0-4/input0
[ 2.797867] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 2.797880] input: Alps Alps Touchpad Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input16
[ 2.797893] input: Alps Alps Touchpad UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input17
[ 2.797906] input: Alps Alps Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:044E:1221.0001/input/input18
[ 2.797918] hid-multitouch 0003:044E:1221.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Alps Alps Touchpad] on usb-0000:00:14.0-4/input0
[ 2.798095] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.798112] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
[ 2.798124] fbcon: i915drmfb (fb0) is primary device
[ 2.798136] Console: switching to colour frame buffer device 187x62
[ 2.798148] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.825028] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3
[ 2.878841] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 2.879071] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 2.879258] hid-generic 001F:8087:0AC3.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
[ 2.888019] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 2.890010] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 2.892010] hid-sensor-hub 001F:8087:0AC3.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
[ 4.287016] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs
[ 4.288009] EXT4-fs (nvme0n1p2): mounted filesystem HASH_F0B-7D73-FFB3-185D-336CCA188D57 ro with ordered data mode. Quota mode: none.
[ 5.203015] zram0: detected capacity change from 0 to 15617024
[ 5.217038] input: Wireless hotkeys as /devices/virtual/input/input20
[ 5.226021] tpm_tis IFX0763:00: 2.0 TPM (device-id 0x1B, rev-id 16)
[ 5.379194] ACPI: AC: AC Adapter [AC] (on-line)
[ 5.379229] input: Intel HID events as /devices/platform/INT33D5:00/input/input21
[ 5.379269] intel_pmc_core INT33A1:00: initialized
[ 5.379446] Consider using thermal netlink events interface
[ 5.379466] mc: Linux media interface: v0.10
[ 5.379490] Adding 17178904k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:17178904k SS
[ 5.379509] Adding 7808508k swap on /dev/zram0. Priority:100 extents:1 across:7808508k SSDsc
[ 5.379533] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22
[ 5.379554] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input23
[ 5.379576] videodev: Linux video capture interface: v2.00
[ 5.379597] thermal LNXTHERM:00: registered as thermal_zone2
[ 5.379796] ACPI: thermal: Thermal Zone [HEPZ] (30 C)
[ 5.379819] thermal LNXTHERM:01: registered as thermal_zone4
[ 5.379990] ACPI: thermal: Thermal Zone [CPUZ] (50 C)
[ 5.380032] thermal LNXTHERM:02: registered as thermal_zone5
[ 5.380218] ACPI: thermal: Thermal Zone [GFXZ] (0 C)
[ 5.380257] thermal LNXTHERM:03: registered as thermal_zone6
[ 5.380455] ACPI: thermal: Thermal Zone [EXTZ] (44 C)
[ 5.380482] thermal LNXTHERM:04: registered as thermal_zone7
[ 5.380685] ACPI: thermal: Thermal Zone [LOCZ] (44 C)
[ 5.380706] thermal LNXTHERM:05: registered as thermal_zone8
[ 5.380899] ACPI: thermal: Thermal Zone [BATZ] (35 C)
[ 5.380923] thermal LNXTHERM:06: registered as thermal_zone9
[ 5.381150] ACPI: thermal: Thermal Zone [CHGZ] (53 C)
[ 5.381174] thermal LNXTHERM:07: registered as thermal_zone10
[ 5.381917] ACPI: thermal: Thermal Zone [PCHZ] (0 C)
[ 5.381946] ipu3-cio2 0000:00:14.3: Found supported sensor INT347E:00
[ 5.382169] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.382405] intel_rapl_common: Found RAPL domain package
[ 5.382431] intel_rapl_common: Found RAPL domain dram
[ 5.382454] ipu3-cio2 0000:00:14.3: Found supported sensor INT3537:00
[ 5.382663] ipu3-cio2 0000:00:14.3: Connected 2 cameras
[ 5.382882] ipu3-cio2 0000:00:14.3: enabling device (0000 -> 0002)
[ 5.383118] ipu3-cio2 0000:00:14.3: device 0x9d32 (rev: 0x1)
[ 5.388028] ipu3_imgu: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.390047] ipu3-imgu 0000:00:05.0: enabling device (0000 -> 0002)
[ 5.485110] ipu3-imgu 0000:00:05.0: device 0x1919 (rev: 0x1)
[ 5.485349] ipu3-imgu 0000:00:05.0: physical base address 0x0000001ffb000000, 4194304 bytes
[ 5.485776] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 5.485819] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 5.486029] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.486285] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.486530] Bluetooth: Core ver 2.22
[ 5.486556] NET: Registered PF_BLUETOOTH protocol family
[ 5.486577] Bluetooth: HCI device and connection manager initialized
[ 5.486601] Bluetooth: HCI socket layer initialized
[ 5.486622] Bluetooth: L2CAP socket layer initialized
[ 5.486647] Bluetooth: SCO socket layer initialized
[ 5.486673] int3472-tps68470 i2c-INT3472:05: TPS68470 REVID: 0x21
[ 5.486901] int3472-tps68470 i2c-INT3472:05: error -ENODEV: No board-data found for this model
[ 5.487100] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.487129] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.487164] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.487183] hp_wmi: query 0x4 returned error 0x5
[ 5.487201] ipu3-imgu 0000:00:05.0: loaded firmware version irci_irci_ecr-master_20161208_0213_20170112_1500, 17 binaries, 1212984 bytes
[ 5.487403] input: HP WMI hotkeys as /devices/virtual/input/input24
[ 5.702052] input: WCOM4870:00 056A:4871 Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input25
[ 5.702139] input: WCOM4870:00 056A:4871 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input26
[ 5.702161] input: WCOM4870:00 056A:4871 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input27
[ 5.702191] input: WCOM4870:00 056A:4871 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input28
[ 5.702206] input: WCOM4870:00 056A:4871 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input29
[ 5.702224] hid-generic 0018:056A:4871.0005: input,hidraw4: I2C HID v1.00 Mouse [WCOM4870:00 056A:4871] on i2c-WCOM4870:00
[ 5.719020] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 5.719090] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.719114] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.719135] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.719176] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.719198] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.750061] Intel(R) Wireless WiFi driver for Linux
[ 5.750122] iwlwifi 0000:6c:00.0: enabling device (0000 -> 0002)
[ 5.767717] usbcore: registered new interface driver btusb
[ 5.767746] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 5.767766] iwlwifi 0000:6c:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000
[ 5.767998] iwlwifi 0000:6c:00.0: PCI dev 24fd/9010, rev=0x230, rfid=0xd55555d5
[ 5.768264] iwlwifi 0000:6c:00.0: Detected Intel(R) Dual Band Wireless AC 8265
[ 5.768483] Bluetooth: hci0: Device revision is 16
[ 5.768505] Bluetooth: hci0: Secure boot is enabled
[ 5.768524] Bluetooth: hci0: OTP lock is enabled
[ 5.768544] Bluetooth: hci0: API lock is enabled
[ 5.768570] Bluetooth: hci0: Debug lock is disabled
[ 5.768590] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 5.805017] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 5.807172] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.807509] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.815029] iwlwifi 0000:6c:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[ 5.851022] snd_hda_codec_conexant hdaudioC0D0: CX11970: BIOS auto-probing.
[ 5.857333] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX11970: line_outs=1 (0x1d/0x0/0x0/0x0/0x0) type:speaker
[ 5.858663] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.858843] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 5.859019] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 5.860337] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 5.860501] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 5.860656] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 5.871035] intel_tcc_cooling: Programmable TCC Offset detected
[ 5.873011] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 5.878020] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 5.879023] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 5.879063] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 5.879099] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[ 5.879119] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[ 5.932014] intel_rapl_common: Found RAPL domain package
[ 5.932057] intel_rapl_common: Found RAPL domain core
[ 5.932080] intel_rapl_common: Found RAPL domain uncore
[ 5.932100] intel_rapl_common: Found RAPL domain dram
[ 5.932121] intel_rapl_common: Found RAPL domain psys
[ 5.951017] iTCO_vendor_support: vendor-support=0
[ 5.958016] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 5.958394] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.017016] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 6.048018] iwlwifi 0000:6c:00.0: base HW address: B55E2CDCBD9441A510B53F4B318EF00F, OTP minor version: 0x4
[ 6.051017] wacom 0018:056A:4871.0005: hidraw4: I2C HID v1.00 Mouse [WCOM4870:00 056A:4871] on i2c-WCOM4870:00
[ 6.051310] input: Wacom HID 4871 Pen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input36
[ 6.051332] input: Wacom HID 4871 Finger as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM4870:00/0018:056A:4871.0005/input/input37
[ 6.134049] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.137013] iwlwifi 0000:6c:00.0 wlp108s0: renamed from wlan0
[ 6.404017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.404059] Bluetooth: BNEP filters: protocol multicast
[ 6.404074] Bluetooth: BNEP socket layer initialized
[ 6.686010] iwlwifi 0000:6c:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 6.979057] NET: Registered PF_PACKET protocol family
[ 7.189016] Bluetooth: hci0: Waiting for firmware download to complete
[ 7.189102] Bluetooth: hci0: Firmware loaded in 1351990 usecs
[ 7.189122] Bluetooth: hci0: Waiting for device to boot
[ 7.201010] Bluetooth: hci0: Device booted in 11699 usecs
[ 7.201039] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[ 7.210018] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 7.213008] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 7.214007] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[ 7.216009] Bluetooth: hci0: Reading supported features failed (-16)
[ 7.216029] Bluetooth: hci0: Error reading debug features
[ 7.216044] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 7.267013] Bluetooth: MGMT ver 1.23
[ 10.228011] wlp108s0: authenticate with FCE28A0F799D1BE8CEB1EF872FDFC1D9 (local address=B55E2CDCBD9441A510B53F4B318EF00F)
[ 10.229019] wlp108s0: send auth to FCE28A0F799D1BE8CEB1EF872FDFC1D9 (try 1/3)
[ 10.270013] wlp108s0: authenticate with FCE28A0F799D1BE8CEB1EF872FDFC1D9 (local address=B55E2CDCBD9441A510B53F4B318EF00F)
[ 10.270047] wlp108s0: send auth to FCE28A0F799D1BE8CEB1EF872FDFC1D9 (try 1/3)
[ 10.273011] wlp108s0: authenticated
[ 10.273068] wlp108s0: associate with FCE28A0F799D1BE8CEB1EF872FDFC1D9 (try 1/3)
[ 10.279010] wlp108s0: RX AssocResp from FCE28A0F799D1BE8CEB1EF872FDFC1D9 (capab=0x1111 status=0 aid=5)
[ 10.280014] wlp108s0: associated
[ 10.320020] wlp108s0: Limiting TX power to 27 (30 - 3) dBm as advertised by FCE28A0F799D1BE8CEB1EF872FDFC1D9
[ 16.861086] Bluetooth: RFCOMM TTY layer initialized
[ 16.861166] Bluetooth: RFCOMM socket layer initialized
[ 16.861190] Bluetooth: RFCOMM ver 1.11
[ 38.061023] block nvme0n1: No UUID available providing old NGUID
[ 40.166018] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 425.268022] Non-volatile memory driver v1.3
[ 425.403020] SCSI subsystem initialized
[ 425.419019] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 1147.164012] wlp108s0: deauthenticating from FCE28A0F799D1BE8CEB1EF872FDFC1D9 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1149.092010] zram0: detected capacity change from 15617024 to 0
[ 1149.570015] watchdog: watchdog0: watchdog did not stop!