[ 0.000000] Linux version 6.1.0-13-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.270 MHz processor [ 0.002545] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002549] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008868] AGP: No AGP bridge found [ 0.008927] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.010657] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010828] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010837] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016440] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016878] RAMDISK: [mem 0x2e59b000-0x332c4fff] ACPI: Early table checksum verification disabled [ 0.016890] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016895] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016901] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016906] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20220331/tbfadt-615) [ 0.016911] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016916] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016919] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016923] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016927] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016931] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016935] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016938] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016942] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016946] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017025] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd5000-0x63effffff] Zone ranges: [ 0.017471] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017478] Movable zone start for each node [ 0.017481] Early memory node ranges [ 0.017482] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017548] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027685] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027713] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027730] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028665] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028734] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028961] ACPI: PM-Timer IO Port: 0x808 [ 0.028968] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028977] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028980] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028983] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028986] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028990] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028991] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028997] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.029020] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029052] Booting paravirtualized kernel on bare hardware [ 0.029054] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.033827] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.034463] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.034472] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.034476] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.034512] Fallback order for Node 0: 0 [ 0.034515] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.034517] Policy zone: Normal [ 0.034519] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.034570] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64", will be passed to user space. [ 0.040696] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.043671] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.043716] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.043719] AGP: Checking aperture... [ 0.050029] AGP: No AGP bridge found [ 0.050031] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.050033] Aperture pointing to e820 RAM. Ignoring. [ 0.050034] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.050035] AGP: Please enable the IOMMU option in the BIOS setup [ 0.050035] AGP: This costs you 64MB of RAM [ 0.050038] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.050042] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.108456] Memory: 3167032K/25119580K available (14342K kernel code, 2329K rwdata, 9132K rodata, 2772K init, 17416K bss, 709376K reserved, 0K cma-reserved) [ 0.108873] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108920] ftrace: allocating 40153 entries in 157 pages [ 0.121614] ftrace: allocated 157 pages with 5 groups [ 0.122698] Dynamic Preempt: voluntary [ 0.122758] rcu: Preemptible hierarchical RCU implementation. [ 0.122759] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.122761] Trampoline variant of Tasks RCU enabled. [ 0.122761] Rude variant of Tasks RCU enabled. [ 0.122762] Tracing variant of Tasks RCU enabled. [ 0.122763] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.122764] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.128551] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.128730] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.128801] spurious 8259A interrupt: IRQ7. [ 0.130679] Console: colour VGA+ 80x25 [ 0.130698] printk: console [tty0] enabled [ 0.130731] ACPI: Core revision 20220331 [ 0.130825] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.130838] APIC: Switch to symmetric I/O mode setup [ 0.131195] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150840] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c96724ee89, max_idle_ns: 440795333752 ns [ 0.150847] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.54 BogoMIPS (lpj=12373080) [ 0.150870] LVT offset 1 assigned for vector 0xf9 [ 0.150875] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150877] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150881] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150883] Spectre V2 : Mitigation: Retpolines [ 0.150884] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150885] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150886] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150887] RETBleed: Mitigation: untrained return thunk [ 0.150889] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150891] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150895] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150897] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150898] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150900] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150901] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.159049] Freeing SMP alternatives memory: 36K [ 0.159054] pid_max: default: 32768 minimum: 301 [ 0.159134] LSM: Security Framework initializing [ 0.159160] landlock: Up and running. [ 0.159162] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.159201] AppArmor: AppArmor initialized [ 0.159203] TOMOYO Linux initialized [ 0.159209] LSM support for eBPF active [ 0.159342] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.159426] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.272971] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.273194] cblist_init_generic: Setting adjustable number of callback queues. [ 0.273196] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.273231] cblist_init_generic: Setting adjustable number of callback queues. [ 0.273232] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.273257] cblist_init_generic: Setting adjustable number of callback queues. [ 0.273259] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.273283] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.273315] ... version: 0 [ 0.273316] ... bit width: 48 [ 0.273317] ... generic registers: 6 [ 0.273318] ... value mask: 0000ffffffffffff [ 0.273319] ... max period: 00007fffffffffff [ 0.273320] ... fixed-purpose events: 0 [ 0.273321] ... event mask: 000000000000003f [ 0.273447] signal: max sigframe size: 1776 [ 0.273480] rcu: Hierarchical SRCU implementation. [ 0.273481] rcu: Max phase no-delay instances is 1000. [ 0.273849] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.274004] smp: Bringing up secondary CPUs ... [ 0.274179] x86: Booting SMP configuration: [ 0.274180] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.330916] smp: Brought up 1 node, 8 CPUs [ 0.330916] smpboot: Max logical packages: 1 [ 0.330916] smpboot: Total of 8 processors activated (49492.32 BogoMIPS) [ 0.388078] node 0 deferred pages initialised in 52ms [ 0.391148] devtmpfs: initialized [ 0.391148] x86/mm: Memory block size: 128MB [ 0.395139] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.395139] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.395139] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.395139] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.395193] pinctrl core: initialized pinctrl subsystem [ 0.396384] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.397213] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.397927] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.399013] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.399053] thermal_sys: Registered thermal governor 'fair_share' [ 0.399053] thermal_sys: Registered thermal governor 'bang_bang' [ 0.399053] thermal_sys: Registered thermal governor 'step_wise' [ 0.399053] thermal_sys: Registered thermal governor 'user_space' [ 0.399053] thermal_sys: Registered thermal governor 'power_allocator' [ 0.399053] cpuidle: using governor ladder [ 0.399054] cpuidle: using governor menu [ 0.399081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.399081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.399081] PCI: not using MMCONFIG [ 0.399081] PCI: Using configuration type 1 for base access [ 0.399081] PCI: Using configuration type 1 for extended access [ 0.399333] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.399335] mtrr: probably your BIOS does not setup all CPUs. [ 0.399336] mtrr: corrected configuration. [ 0.401004] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.401016] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401016] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.401016] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401016] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.401016] ACPI: Added _OSI(Module Device) [ 0.401016] ACPI: Added _OSI(Processor Device) [ 0.401016] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.401016] ACPI: Added _OSI(Processor Aggregator Device) [ 0.407373] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.408765] ACPI: Interpreter enabled [ 0.408787] ACPI: PM: (supports S0 S3 S4 S5) [ 0.408789] ACPI: Using IOAPIC for interrupt routing [ 0.408967] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.409017] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.409035] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.409037] PCI: Using E820 reservations for host bridge windows [ 0.409254] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.417760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.417768] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.418311] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.418507] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.418529] pci 0000:00:02.0: enabling Extended Tags [ 0.418557] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.418680] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.418701] pci 0000:00:04.0: enabling Extended Tags [ 0.418728] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.418863] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.418885] pci 0000:00:05.0: enabling Extended Tags [ 0.418912] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.419023] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.419044] pci 0000:00:06.0: enabling Extended Tags [ 0.419071] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.419183] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.419203] pci 0000:00:09.0: enabling Extended Tags [ 0.419230] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.419368] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.419389] pci 0000:00:0a.0: enabling Extended Tags [ 0.419416] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.419536] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.419551] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.419738] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.419753] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.419919] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.419989] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.420107] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.420122] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.420286] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.420356] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.420467] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.420618] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.420633] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.420833] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.420990] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.421171] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.421302] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.421317] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.421486] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.421651] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.421720] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.421824] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.421898] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.421963] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.422028] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.422097] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.422161] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.422294] pci 0000:01:00.0: [1002:6898] type 00 class 0x030000 [ 0.422310] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.422364] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.422489] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300 [ 0.422504] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.422574] pci 0000:01:00.1: supports D1 D2 [ 0.422666] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.422748] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.422836] pci 0000:02:00.0: PME# supported from D3hot [ 0.422935] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.423041] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.423130] pci 0000:03:00.0: supports D1 D2 [ 0.423132] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.423238] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.423318] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.423407] pci 0000:04:00.0: supports D1 D2 [ 0.423409] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.423520] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.423615] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.423709] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.423825] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.423842] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.423955] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.434870] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.434956] pci 0000:06:00.0: reg 0x10: [mem 0xd0010000-0xd001ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0000000-0xd000ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.435240] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.435297] pci 0000:07:05.0: [1106:3038] type 00 class 0x0c0300 [ 0.435347] pci 0000:07:05.0: reg 0x20: [io 0xb020-0xb03f] pci 0000:07:05.0: supports D1 D2 [ 0.435398] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.435459] pci 0000:07:05.1: [1106:3038] type 00 class 0x0c0300 [ 0.435510] pci 0000:07:05.1: reg 0x20: [io 0xb000-0xb01f] pci 0000:07:05.1: supports D1 D2 [ 0.435560] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.435624] pci 0000:07:05.2: [1106:3104] type 00 class 0x0c0320 [ 0.435642] pci 0000:07:05.2: reg 0x10: [mem 0xfe401000-0xfe4010ff] pci 0000:07:05.2: supports D1 D2 [ 0.435725] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.435792] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.435810] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.435972] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.435976] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.435986] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.435988] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.435990] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.435992] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.435994] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.436834] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.436900] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.436968] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.437035] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.437095] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.437145] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.437190] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.437235] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.437440] iommu: Default domain type: Translated [ 0.437440] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.437440] pps_core: LinuxPPS API ver. 1 registered [ 0.437440] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.437440] PTP clock support registered [ 0.437440] EDAC MC: Ver: 3.0.0 [ 0.437440] NetLabel: Initializing [ 0.437440] NetLabel: domain hash size = 128 [ 0.437440] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.437440] NetLabel: unlabeled traffic allowed by default [ 0.437440] PCI: Using ACPI for IRQ routing [ 0.444555] PCI: pci_cache_line_size set to 64 bytes [ 0.444628] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.444667] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.444667] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.444667] vgaarb: loaded [ 0.444667] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.444667] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.446888] clocksource: Switched to clocksource tsc-early [ 0.447114] VFS: Disk quotas dquot_6.6.0 [ 0.447137] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.447401] AppArmor: AppArmor Filesystem Enabled [ 0.447423] pnp: PnP ACPI init [ 0.447560] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.447730] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.448295] system 00:03: [io 0x040b] has been reserved [ 0.448299] system 00:03: [io 0x04d6] has been reserved [ 0.448302] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.448305] system 00:03: [io 0x0c14] has been reserved [ 0.448308] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.448312] system 00:03: [io 0x0c52] has been reserved [ 0.448315] system 00:03: [io 0x0c6c] has been reserved [ 0.448317] system 00:03: [io 0x0c6f] has been reserved [ 0.448320] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.448323] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.448326] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.448329] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.448332] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.448337] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.448341] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.448343] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.448346] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.448350] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.448353] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.448358] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.448363] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.448372] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.448376] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.448380] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.448384] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.448536] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.448872] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.449618] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.457927] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.458040] NET: Registered PF_INET protocol family [ 0.458471] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.463280] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.463369] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.463774] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.464563] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.464932] TCP: Hash tables configured (established 262144 bind 65536) [ 0.465264] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.465475] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.465653] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.465814] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.465839] NET: Registered PF_XDP protocol family [ 0.465872] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x750 took 20319 usecs [ 0.506934] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x750 took 19293 usecs [ 0.526934] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x750 took 19267 usecs [ 0.546933] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x750 took 19520 usecs [ 0.547217] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.547918] PCI: CLS 64 bytes, default 64 [ 0.548009] Trying to unpack rootfs image as initramfs... [ 0.548875] PCI-DMA: Disabling AGP. [ 0.548965] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.548970] PCI-DMA: using GART IOMMU. [ 0.548975] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.549856] software IO TLB: tearing down default memory pool [ 0.555961] LVT offset 0 assigned for vector 0x400 [ 0.556471] perf: AMD IBS detected (0x000000ff) [ 0.556480] amd_uncore: 4 amd_nb counters detected [ 0.558122] Initialise system trusted keyrings [ 0.558145] Key type blacklist registered [ 0.558221] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.560629] zbud: loaded [ 0.561005] integrity: Platform Keyring initialized [ 0.561013] integrity: Machine keyring initialized [ 0.561015] Key type asymmetric registered [ 0.561016] Asymmetric key parser 'x509' registered [ 1.379526] Freeing initrd memory: 79016K [ 1.386329] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.386385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.386444] io scheduler mq-deadline registered [ 1.388859] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.388906] ACPI: \_PR_.P001: Found 2 idle states [ 1.389027] ACPI: \_PR_.P002: Found 2 idle states [ 1.389119] ACPI: \_PR_.P003: Found 2 idle states [ 1.389225] ACPI: \_PR_.P004: Found 2 idle states [ 1.389372] ACPI: \_PR_.P005: Found 2 idle states [ 1.389517] ACPI: \_PR_.P006: Found 2 idle states [ 1.389613] ACPI: \_PR_.P007: Found 2 idle states [ 1.389759] ACPI: \_PR_.P008: Found 2 idle states [ 1.390166] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.390309] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.391150] Linux agpgart interface v0.103 [ 1.391227] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.392076] i8042: PNP: No PS/2 controller found. [ 1.392166] mousedev: PS/2 mouse device common for all mice [ 1.392189] rtc_cmos 00:06: RTC can wake from S4 [ 1.392415] rtc_cmos 00:06: registered as rtc0 [ 1.392439] rtc_cmos 00:06: setting system clock to 2023-12-24T10:36:46 UTC (1703414206) [ 1.392471] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.392594] ledtrig-cpu: registered to indicate activity on CPUs [ 1.405490] NET: Registered PF_INET6 protocol family [ 1.412148] Segment Routing with IPv6 [ 1.412163] In-situ OAM (IOAM) with IPv6 [ 1.412188] mip6: Mobile IPv6 [ 1.412192] NET: Registered PF_PACKET protocol family [ 1.412246] mpls_gso: MPLS GSO support [ 1.412248] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.412867] microcode: microcode updated early to new patch_level=0x0600063e [ 1.412932] microcode: CPU0: patch_level=0x0600063e [ 1.412942] microcode: CPU1: patch_level=0x0600063e [ 1.412948] microcode: CPU2: patch_level=0x0600063e [ 1.412955] microcode: CPU3: patch_level=0x0600063e [ 1.412965] microcode: CPU4: patch_level=0x0600063e [ 1.412973] microcode: CPU5: patch_level=0x0600063e [ 1.412982] microcode: CPU6: patch_level=0x0600063e [ 1.412990] microcode: CPU7: patch_level=0x0600063e [ 1.412995] microcode: Microcode Update Driver: v2.2. [ 1.413001] IPI shorthand broadcast: enabled [ 1.413029] sched_clock: Marking stable (1410757265, 2073258)->(1430981258, -18150735) [ 1.413496] registered taskstats version 1 [ 1.413508] Loading compiled-in X.509 certificates [ 1.440922] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.440947] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.442010] zswap: loaded using pool lzo/zbud [ 1.442317] Key type .fscrypt registered [ 1.442319] Key type fscrypt-provisioning registered [ 1.448148] Key type encrypted registered [ 1.448153] AppArmor: AppArmor sha1 policy hashing enabled [ 1.448165] ima: No TPM chip found, activating TPM-bypass! [ 1.448168] ima: Allocated hash algorithm: sha256 [ 1.448179] ima: No architecture policies found [ 1.448207] evm: Initialising EVM extended attributes: [ 1.448208] evm: security.selinux [ 1.448209] evm: security.SMACK64 (disabled) [ 1.448210] evm: security.SMACK64EXEC (disabled) [ 1.448211] evm: security.SMACK64TRANSMUTE (disabled) [ 1.448212] evm: security.SMACK64MMAP (disabled) [ 1.448213] evm: security.apparmor [ 1.448214] evm: security.ima [ 1.448215] evm: security.capability [ 1.448216] evm: HMAC attrs: 0x1 [ 1.570158] tsc: Refined TSC clocksource calibration: 3093.302 MHz [ 1.570176] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969066b9c, max_idle_ns: 440795307428 ns [ 1.570273] clocksource: Switched to clocksource tsc [ 1.587633] Freeing unused decrypted memory: 2036K [ 1.588501] Freeing unused kernel image (initmem) memory: 2772K [ 1.598195] Write protecting the kernel read-only data: 26624k [ 1.599157] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.599487] Freeing unused kernel image (rodata/data gap) memory: 1108K [ 1.661163] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.661168] Run /init as init process [ 1.661169] with arguments: [ 1.661171] /init [ 1.661172] with environment: [ 1.661172] HOME=/ [ 1.661173] TERM=linux [ 1.661174] BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 [ 1.795678] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.795735] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.804427] Floppy drive(s): fd0 is 1.44M [ 1.810112] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.810124] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.810320] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.810394] ACPI: button: Power Button [PWRF] SCSI subsystem initialized [ 1.834102] FDC 0 is a post-1991 82077 [ 1.847993] ACPI: bus type USB registered [ 1.848032] usbcore: registered new interface driver usbfs [ 1.848052] usbcore: registered new interface driver hub [ 1.848074] usbcore: registered new device driver usb [ 1.863809] libata version 3.00 loaded. [ 1.893370] ACPI: bus type drm_connector registered [ 1.897381] pata_via 0000:05:00.1: version 0.3.4 [ 1.897616] ahci 0000:00:11.0: version 3.0 [ 1.901928] scsi host0: pata_atiixp [ 1.904120] scsi host1: pata_atiixp [ 1.904224] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.904227] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.904429] scsi host2: pata_via [ 1.904751] QUIRK: Enable AMD PLL fix [ 1.904765] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.904776] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 1.904831] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 1.905038] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.905046] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 1.905050] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.905086] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.905246] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.905249] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.905252] usb usb1: Product: xHCI Host Controller [ 1.905253] usb usb1: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 1.905255] usb usb1: SerialNumber: ... [ 1.905506] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.905510] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.906357] scsi host3: pata_via [ 1.906434] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 [ 1.906436] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 [ 1.906918] hub 1-0:1.0: USB hub found [ 1.907000] hub 1-0:1.0: 2 ports detected [ 1.907197] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.907236] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.907239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.907241] usb usb2: Product: xHCI Host Controller [ 1.907243] usb usb2: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 1.907245] usb usb2: SerialNumber: ... [ 1.907624] scsi host4: ahci [ 1.907962] scsi host5: ahci [ 1.908409] hub 2-0:1.0: USB hub found [ 1.908426] hub 2-0:1.0: 2 ports detected [ 1.908486] scsi host6: ahci [ 1.908841] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.908847] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.908856] ehci-pci 0000:00:12.2: debug port 1 [ 1.908897] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.909018] scsi host7: ahci [ 1.909149] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.909153] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.909155] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.909157] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.909424] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 1.909429] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.910370] scsi host8: ahci [ 1.910676] scsi host9: ahci [ 1.910792] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 39 [ 1.910796] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 39 [ 1.919083] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 1.919088] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.919091] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.926370] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.926373] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.926376] usb usb3: Product: EHCI Host Controller [ 1.926378] usb usb3: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd [ 1.926379] usb usb3: SerialNumber: ... [ 1.926539] hub 3-0:1.0: USB hub found [ 1.926548] hub 3-0:1.0: 5 ports detected [ 1.926778] uhci_hcd 0000:07:05.0: UHCI Host Controller [ 1.926784] uhci_hcd 0000:07:05.0: new USB bus registered, assigned bus number 4 [ 1.926791] uhci_hcd 0000:07:05.0: detected 2 ports [ 1.926820] uhci_hcd 0000:07:05.0: irq 20, io port 0x0000b020 [ 1.926888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 1.926891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.926893] usb usb4: Product: UHCI Host Controller [ 1.926895] usb usb4: Manufacturer: Linux 6.1.0-13-amd64 uhci_hcd [ 1.926896] usb usb4: SerialNumber: ... [ 1.927147] hub 4-0:1.0: USB hub found [ 1.927157] hub 4-0:1.0: 2 ports detected [ 1.927309] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.927321] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 1.927385] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 1.927569] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.927573] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 1.927576] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.927656] uhci_hcd 0000:07:05.1: UHCI Host Controller [ 1.927706] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.927709] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.927711] usb usb5: Product: xHCI Host Controller [ 1.927713] usb usb5: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 1.927715] usb usb5: SerialNumber: ... [ 1.927855] hub 5-0:1.0: USB hub found [ 1.927867] hub 5-0:1.0: 2 ports detected [ 1.928010] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.928048] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.928051] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.928053] usb usb6: Product: xHCI Host Controller [ 1.928054] usb usb6: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd [ 1.928056] usb usb6: SerialNumber: ... [ 1.928188] hub 6-0:1.0: USB hub found [ 1.928199] hub 6-0:1.0: 2 ports detected [ 1.928335] uhci_hcd 0000:07:05.1: new USB bus registered, assigned bus number 7 [ 1.928343] uhci_hcd 0000:07:05.1: detected 2 ports [ 1.928370] uhci_hcd 0000:07:05.1: irq 21, io port 0x0000b000 [ 1.928439] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 1.928442] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.928444] usb usb7: Product: UHCI Host Controller [ 1.928446] usb usb7: Manufacturer: Linux 6.1.0-13-amd64 uhci_hcd [ 1.928447] usb usb7: SerialNumber: ... [ 1.928590] hub 7-0:1.0: USB hub found [ 1.928600] hub 7-0:1.0: 2 ports detected [ 1.928759] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.928766] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8 [ 1.928770] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.928779] ehci-pci 0000:00:13.2: debug port 1 [ 1.928830] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.946219] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.946340] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.946343] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.946346] usb usb8: Product: EHCI Host Controller [ 1.946347] usb usb8: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd [ 1.946349] usb usb8: SerialNumber: ... [ 1.946495] hub 8-0:1.0: USB hub found [ 1.946504] hub 8-0:1.0: 5 ports detected [ 1.946878] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.946884] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 9 [ 1.946887] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.946895] ehci-pci 0000:00:16.2: debug port 1 [ 1.946921] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.966266] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.966376] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.966380] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.966382] usb usb9: Product: EHCI Host Controller [ 1.966384] usb usb9: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd [ 1.966386] usb usb9: SerialNumber: ... [ 1.966538] hub 9-0:1.0: USB hub found [ 1.966547] hub 9-0:1.0: 4 ports detected [ 1.967145] ehci-pci 0000:07:05.2: EHCI Host Controller [ 1.967151] ehci-pci 0000:07:05.2: new USB bus registered, assigned bus number 10 [ 1.967197] ehci-pci 0000:07:05.2: irq 22, io mem 0xfe401000 [ 1.978215] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.982329] ehci-pci 0000:07:05.2: USB 2.0 started, EHCI 1.00 [ 1.982401] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.982405] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.982407] usb usb10: Product: EHCI Host Controller [ 1.982409] usb usb10: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd [ 1.982410] usb usb10: SerialNumber: ... [ 1.982552] hub 10-0:1.0: USB hub found [ 1.982562] hub 10-0:1.0: 4 ports detected [ 2.010377] hub 4-0:1.0: USB hub found [ 2.010388] hub 4-0:1.0: 2 ports detected [ 2.038332] hub 7-0:1.0: USB hub found [ 2.038359] hub 7-0:1.0: 2 ports detected [ 2.074554] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.074559] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.074565] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.074569] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.074570] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.080726] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.081964] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.226196] ata10: SATA link down (SStatus 0 SControl 330) [ 2.226235] ata9: SATA link down (SStatus 0 SControl 330) [ 2.238182] usb 10-1: new high-speed USB device number 2 using ehci-pci [ 2.386190] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.386221] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.386252] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.386284] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.386382] ata6.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.386421] ata6.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.386533] ata6.00: configured for UDMA/133 [ 2.387231] ata7.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.387479] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.387800] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 2.388100] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.388511] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.388682] ata7.00: configured for UDMA/133 [ 2.388863] ata8.00: configured for UDMA/133 [ 2.390350] ata5.00: configured for UDMA/133 [ 2.390554] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 2.391123] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.391698] scsi 6:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.393916] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.394542] usb 10-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.394547] usb 10-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.394843] hub 10-1:1.0: USB hub found [ 2.394915] hub 10-1:1.0: 2 ports detected [ 2.434581] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.434590] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 11 [ 2.434624] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.436205] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.498349] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.502278] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.502284] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.502287] usb usb11: Product: OHCI PCI host controller [ 2.502288] usb usb11: Manufacturer: Linux 6.1.0-13-amd64 ohci_hcd [ 2.502290] usb usb11: SerialNumber: ... [ 2.502453] hub 11-0:1.0: USB hub found [ 2.502464] hub 11-0:1.0: 5 ports detected [ 2.502930] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.502940] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 12 [ 2.502963] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.509301] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.509306] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.566270] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.566274] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.566277] usb usb12: Product: OHCI PCI host controller [ 2.566279] usb usb12: Manufacturer: Linux 6.1.0-13-amd64 ohci_hcd [ 2.566280] usb usb12: SerialNumber: ... [ 2.566429] hub 12-0:1.0: USB hub found [ 2.566440] hub 12-0:1.0: 5 ports detected [ 2.566894] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.566900] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 13 [ 2.566921] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.570805] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.570832] sd 0:0:0:0: [sda] Write Protect is off [ 2.570837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.570875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.570923] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.571145] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.571421] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.571425] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.571426] sd 5:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.571448] sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.571450] sd 4:0:0:0: [sdb] Write Protect is off [ 2.571452] sd 5:0:0:0: [sdc] Write Protect is off [ 2.571453] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 2.571454] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.571457] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.571478] sd 6:0:0:0: [sdd] Write Protect is off [ 2.571483] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.571494] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.571501] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.571526] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.571545] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.571565] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.571584] sd 6:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 2.572294] sda: sda1 sda2 [ 2.572441] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.572576] sdc: sdc1 sdc2 sdc3 [ 2.572750] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.599268] sdd: sdd1 sdd2 [ 2.599464] sdb: sdb1 sdb2 sdb3 [ 2.599473] sd 6:0:0:0: [sdd] Attached SCSI disk [ 2.599695] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.624380] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.632752] usb usb13: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.632757] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.632760] usb usb13: Product: OHCI PCI host controller [ 2.632762] usb usb13: Manufacturer: Linux 6.1.0-13-amd64 ohci_hcd [ 2.632764] usb usb13: SerialNumber: ... [ 2.633054] hub 13-0:1.0: USB hub found [ 2.633068] hub 13-0:1.0: 2 ports detected [ 2.633429] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.633441] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 14 [ 2.633469] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.676400] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 2.694159] usb usb14: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.694165] usb usb14: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.694169] usb usb14: Product: OHCI PCI host controller [ 2.694171] usb usb14: Manufacturer: Linux 6.1.0-13-amd64 ohci_hcd [ 2.694173] usb usb14: SerialNumber: ... [ 2.694346] hub 14-0:1.0: USB hub found [ 2.694357] hub 14-0:1.0: 4 ports detected [ 2.718093] usb 10-1.2: new high-speed USB device number 3 using ehci-pci [ 2.737679] [drm] radeon kernel modesetting enabled. [ 2.737824] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 2.738319] Console: switching to colour dummy device 80x25 [ 2.738688] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898 0x1462:0x2100 0x00). [ 2.738791] ATOM BIOS: 113 [ 2.738843] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.738847] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.738852] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.738854] [drm] RAM width 256bits DDR [ 2.738879] [drm] radeon: 1024M of VRAM memory ready [ 2.738881] [drm] radeon: 1024M of GTT memory ready. [ 2.738894] [drm] Loading CYPRESS Microcode [ 2.738926] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_pfp.bin [ 2.738950] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_me.bin [ 2.738976] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_rlc.bin [ 2.739018] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_smc.bin [ 2.739023] [drm] Internal thermal controller with fan control [ 2.766353] [drm] radeon: dpm initialized [ 2.766420] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin [ 2.766435] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.767475] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.789035] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 2.789113] radeon 0000:01:00.0: WB enabled [ 2.789116] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 2.789118] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 2.789480] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 2.789901] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.789946] radeon 0000:01:00.0: radeon: using MSI. [ 2.789971] [drm] radeon: irq initialized. [ 2.806190] [drm] ring test on 0 succeeded in 1 usecs [ 2.806195] [drm] ring test on 3 succeeded in 2 usecs [ 3.001780] usb 11-1: new low-speed USB device number 2 using ohci-pci [ 3.001815] usb 12-2: new full-speed USB device number 2 using ohci-pci [ 3.001958] [drm] ring test on 5 succeeded in 1 usecs [ 3.001963] [drm] UVD initialized successfully. [ 3.002212] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.002252] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.172147] [drm] ib test on ring 5 succeeded [ 3.172677] [drm] Radeon Display Connectors [ 3.172678] [drm] Connector 0: [ 3.172679] [drm] DP-1 [ 3.172680] [drm] HPD4 [ 3.172681] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 3.172684] [drm] Encoders: [ 3.172685] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.172686] [drm] Connector 1: [ 3.172687] [drm] HDMI-A-1 [ 3.172687] [drm] HPD5 [ 3.172688] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 3.172690] [drm] Encoders: [ 3.172691] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.172692] [drm] Connector 2: [ 3.172692] [drm] DVI-I-1 [ 3.172693] [drm] HPD1 [ 3.172694] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 3.172696] [drm] Encoders: [ 3.172696] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.172697] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 3.172698] [drm] Connector 3: [ 3.172699] [drm] DVI-I-2 [ 3.172700] [drm] HPD6 [ 3.172700] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 3.172702] [drm] Encoders: [ 3.172703] [drm] DFP4: INTERNAL_UNIPHY [ 3.172704] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.202434] usb 10-1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 3.202440] usb 10-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.202442] usb 10-1.2: Product: 802.11n NIC [ 3.202444] usb 10-1.2: Manufacturer: Realtek [ 3.202445] usb 10-1.2: SerialNumber: ... [ 3.234377] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 3.296697] [drm] fb mappable at 0xC034D000 [ 3.296699] [drm] vram apper at 0xC0000000 [ 3.296700] [drm] size 5242880 [ 3.296701] [drm] fb depth is 24 [ 3.296702] [drm] pitch is 5120 [ 3.296772] fbcon: radeondrmfb (fb0) is primary device [ 3.328484] Console: switching to colour frame buffer device 160x64 [ 3.330726] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 3.354291] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 3.407270] usb 12-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.407276] usb 12-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.407278] usb 12-2: Product: A4Tech Gaming Mouse [ 3.407280] usb 12-2: Manufacturer: PixArt [ 3.613351] usb 3-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.613364] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.613369] usb 3-2: SerialNumber: ... [ 3.734194] usb 12-3: new full-speed USB device number 3 using ohci-pci [ 3.929356] usb 12-3: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.929360] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.929363] usb 12-3: Product: USB Device [ 3.929364] usb 12-3: Manufacturer: COMPANY [ 4.647374] usb 11-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.647379] usb 11-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.647382] usb 11-1: Product: NOVA AVR [ 4.647383] usb 11-1: Manufacturer: MGE UPS SYSTEMS [ 5.272523] hid: raw HID events driver (C) Jiri Kosina [ 5.281662] [drm] amdgpu kernel modesetting enabled. [ 5.281771] amdgpu: CRAT table not found [ 5.281775] amdgpu: Virtual CRAT table created for CPU [ 5.281794] amdgpu: Topology: Add CPU node [ 7.824013] usbcore: registered new interface driver usbhid [ 7.824016] usbhid: USB HID core driver [ 7.826532] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb12/12-2/12-2:1.0/0003:09DA:3519.0001/input/input2 [ 7.826631] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 7.826988] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:13.0/usb12/12-2/12-2:1.1/0003:09DA:3519.0002/input/input4 [ 7.886516] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 7.886733] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.0/0003:09DA:FAA8.0003/input/input5 [ 7.946571] hid-generic 0003:09DA:FAA8.0003: input,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input0 [ 7.946735] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.1/0003:09DA:FAA8.0004/input/input6 [ 7.946817] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:13.0-3/input1 [ 7.947158] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.2/0003:09DA:FAA8.0005/input/input7 [ 8.006300] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb12/12-3/12-3:1.2/0003:09DA:FAA8.0005/input/input8 [ 8.006575] hid-generic 0003:09DA:FAA8.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input2 [ 8.007178] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:12.0-1/input0 [ 8.138154] raid6: sse2x4 gen() 12619 MB/s [ 8.206153] raid6: sse2x2 gen() 11506 MB/s [ 8.274153] raid6: sse2x1 gen() 8048 MB/s [ 8.274155] raid6: using algorithm sse2x4 gen() 12619 MB/s [ 8.342152] raid6: .... xor() 4650 MB/s, rmw enabled [ 8.342154] raid6: using ssse3x2 recovery algorithm [ 8.343290] xor: automatically using best checksumming function avx [ 8.344060] async_tx: api initialized (async) [ 8.598577] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 21.462939] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 21.462987] floppy: error 10 while reading block 0 [ 21.746911] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Quota mode: none. [ 21.861877] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.425159] loop: module loaded [ 22.433114] fuse: init (API version 7.37) [ 22.437412] EXT4-fs (sdc2): re-mounted. Quota mode: none. [ 22.438046] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 22.438107] device-mapper: uevent: version 1.0.3 [ 22.438225] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 22.464433] lp: driver loaded but no devices found [ 22.470266] ppdev: user-space parallel port driver [ 22.570085] random: crng init done [ 22.866956] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.867046] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 22.867137] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 22.867191] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 22.867239] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 22.867292] sr 7:0:0:0: Attached scsi generic sg5 type 5 [ 22.893862] acpi_cpufreq: overriding BIOS provided _PSD data [ 23.090770] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 23.090918] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 23.092216] mc: Linux media interface: v0.10 [ 23.103299] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 23.121816] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 23.122213] cryptd: max_cpu_qlen set to 1000 [ 23.142902] videodev: Linux video capture interface: v2.00 [ 23.158097] AVX version of gcm_enc/dec engaged. [ 23.158162] AES CTR mode by8 optimization enabled [ 23.196586] usb 3-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 23.236212] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 23.237799] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 23.237808] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 23.251825] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:12.2/usb3/3-2/3-2:1.0/input/input11 [ 23.255904] usbcore: registered new interface driver uvcvideo [ 23.282255] Registered IR keymap rc-avermedia-m135a [ 23.289015] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 23.289023] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.289026] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.289030] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 23.289032] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 23.289034] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 23.289037] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 23.289040] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 23.289042] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 23.299012] IR NEC protocol handler initialized [ 23.312858] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 23.324189] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 23.326796] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 23.326872] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 23.326949] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 23.394227] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 23.396525] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 23.398056] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 23.399948] usbcore: registered new interface driver r8188eu [ 23.411066] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 23.424809] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 23.424949] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 23.425057] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 23.426040] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 23.474572] r8188eu 10-1.2:1.0 wlxd037459855f3: renamed from wlan0 [ 23.492360] SVM: TSC scaling supported [ 23.492363] kvm: Nested Virtualization enabled [ 23.492364] SVM: kvm: Nested Paging enabled [ 23.492370] SVM: LBR virtualization supported [ 23.494093] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 23.494101] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 23.494105] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 23.494107] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494111] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 23.494115] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494116] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494118] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494121] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494123] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494126] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494128] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494131] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494133] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494136] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.494138] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.505429] MCE: In-kernel MCE decoding enabled. [ 23.558111] tuner: 14-004b: Tuner -1 found with type(s) Radio TV. [ 23.678100] tda829x 14-004b: setting tuner address to 60 [ 23.770183] tda829x 14-004b: type set to tda8290+75a [ 24.634172] usb 3-2: set resolution quirk: cval->res = 384 [ 24.635198] usbcore: registered new interface driver snd-usb-audio [ 28.014912] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 28.015130] saa7134: saa7133[0]: registered device radio0 [ 28.030682] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 28.030761] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 32.938733] Process accounting resumed [ 33.233296] NET: Registered PF_QIPCRTR protocol family [ 33.234429] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 33.234760] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 33.235058] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 33.235363] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 33.236353] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 33.236715] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 33.426762] vboxdrv: loading out-of-tree module taints kernel. [ 33.427175] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 33.452211] vboxdrv: Found 8 processor cores/threads [ 33.474333] vboxdrv: TSC mode is Invariant, tentative frequency 3093302310 Hz [ 33.474336] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004) [ 33.578329] r8188eu 10-1.2:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 33.578343] r8188eu 10-1.2:1.0: Firmware Version 28, SubVersion 0, Signature 0x88e1 [ 33.686691] VBoxNetFlt: Successfully started. [ 33.691378] VBoxNetAdp: Successfully started. [ 35.112306] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 35.112312] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 35.112314] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 35.486703] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 37.103925] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd037459855f3: link becomes ready [ 37.634155] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 46.478401] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 53.106523] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 56.902597] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 81.458992] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 88.482545] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 91.622183] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 96.673409] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 103.308065] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 107.151322] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 110.450520] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 229.578652] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 333.159644] Process accounting resumed [ 440.150246] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 539.249506] Non-volatile memory driver v1.3 [ 544.537546] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 551.640882] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 551.640900] floppy: error 10 while reading block 0 [ 565.524722] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 565.524740] floppy: error 10 while reading block 0 [ 566.803973] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 587.544943] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 587.544960] floppy: error 10 while reading block 0 [ 985.498499] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 985.520948] JFS: nTxBlock = 8192, nTxLock = 65536 [ 985.598870] QNX4 filesystem 0.2.3 registered. [ 1106.451243] traps: fr24feed[2700] general protection fault ip:ad7f85 sp:7f89793b8210 error:0 in fr24feed[401000+7b2000] watchdog: watchdog0: watchdog did not stop!