[ 0.000000] Linux version 6.8.0-48-generic (XXX@XXX) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #48-Ubuntu SMP PREEMPT_DYNAMIC Fri Sep 27 14:04:52 UTC 2024 (Ubuntu 6.8.0-48.48-generic 6.8.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-48-generic root=UUID=HASH_150-F548-B59F-C1A0-33F6E344BC92 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/tme: enabled by BIOS [ 0.000000] x86/mktme: No known encryption algorithm is supported: 0x0 [ 0.000000] x86/mktme: disabled by BIOS [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003c88dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000003c88e000-0x000000003fa90fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003fa91000-0x000000003fb32fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fb33000-0x000000003fbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003fbff000-0x000000003fbfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fc00000-0x0000000045ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000046a00000-0x0000000046bfffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000047c00000-0x00000000507fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004af7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] efi: EFI v2.7 by HP [ 0.000000] efi: ACPI=0x3fbfe000 ACPI 2.0=0x3fbfe014 TPMFinalLog=0x3fac0000 SMBIOS=0x3c977000 ESRT=0x3c97a318 MEMATTR=0x3662f018 MOKvar=0x3c976000 INITRD=0x36630698 RNG=0x3fb65018 TPMEventLog=0x34d4a018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem423: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 0.000000] efi: Remove mem425: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.3 present. [ 0.000000] DMI: HP HP EliteBook x360 1040 G8 Notebook PC/8720, BIOS T93 Ver. 01.18.00 08/27/2024 [ 0.000000] tsc: Detected 3000.000 MHz processor [ 0.000000] tsc: Detected 2995.200 MHz TSC [ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000013] last_pfn = 0x4af800 max_arch_pfn = 0x400000000 [ 0.000016] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs [ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000504] last_pfn = 0x3fc00 max_arch_pfn = 0x400000000 [ 0.007036] esrt: Reserving ESRT space from 0x000000003c97a318 to 0x000000003c97a3f0. [ 0.007067] Using GB pages for direct mapping [ 0.007236] secureboot: Secure boot disabled [ 0.007236] RAMDISK: [mem 0x2e950000-0x32802fff] ACPI: Early table checksum verification disabled [ 0.007563] ACPI: RSDP 0x000000003FBFE014 000024 (v02 HPQOEM) [ 0.007566] ACPI: XSDT 0x000000003FB66228 000174 (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.007573] ACPI: FACP 0x000000003FBCA000 000114 (v06 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.007577] ACPI: DSDT 0x000000003FB88000 03FE10 (v02 HPQOEM 8720 00000000 INTL 20160527) [ 0.007580] ACPI: FACS 0x000000003FAA4000 000040 [ 0.007582] ACPI: SSDT 0x000000003FBFB000 00187C (v01 HP PSENWSAR 00001000 INTL 20160527) [ 0.007584] ACPI: SSDT 0x000000003FBFA000 0002D7 (v01 HP NVTEC 00000001 INTL 20160527) [ 0.007587] ACPI: SSDT 0x000000003FBF9000 00012A (v02 HP ShmTable 00000001 INTL 20160527) [ 0.007589] ACPI: SSDT 0x000000003FBF6000 00255C (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.007591] ACPI: SSDT 0x000000003FBEA000 00B1DA (v02 AcpiRe PLT_RTD3 00001000 INTL 20160527) [ 0.007593] ACPI: RTMA 0x000000003FBE9000 00009E (v01 HP _HBMART_ 00001000 HP 00000001) [ 0.007595] ACPI: SSDT 0x000000003FBE7000 001575 (v02 HP UcsiAcpi 00000001 INTL 20160527) [ 0.007597] ACPI: SSDT 0x000000003FBE6000 0000FB (v02 HP UcsiCntr 00000001 INTL 20160527) [ 0.007599] ACPI: OEML 0x000000003FBE5000 000028 (v03 HPQOEM TGL-ULT 00000002 01000013) [ 0.007602] ACPI: SSDT 0x000000003FBE4000 0005FB (v02 HPQOEM Tpm2Tabl 00001000 INTL 20160527) [ 0.007604] ACPI: TPM2 0x000000003FBE3000 00004C (v04 HPQOEM TGL-ULT 00000002 01000013) [ 0.007606] ACPI: SSDT 0x000000003FBE1000 001D55 (v01 HP TABLETPC 00001000 INTL 20160527) [ 0.007608] ACPI: SSDT 0x000000003FBDD000 002E43 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.007610] ACPI: SSDT 0x000000003FBD9000 003375 (v02 INTEL IgfxSsdt 00003000 INTL 20160527) [ 0.007612] ACPI: SSDT 0x000000003FBCD000 00B6E3 (v02 INTEL TcssSsdt 00001000 INTL 20160527) [ 0.007614] ACPI: MSDM 0x000000003FBCC000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.007617] ACPI: WSMT 0x000000003FBCB000 000028 (v01 HPQOEM 8720 00000001 HP 00000001) [ 0.007619] ACPI: HPET 0x000000003FBC9000 000038 (v01 HPQOEM 8720 00000001 HP 00000001) [ 0.007621] ACPI: APIC 0x000000003FBC8000 00012C (v04 HPQOEM 8720 00000001 HP 00000001) [ 0.007623] ACPI: SSDT 0x000000003FBFD000 0009E5 (v02 HPQOEM HP_XHC_P 00000000 INTL 20160527) [ 0.007625] ACPI: NHLT 0x000000003FB85000 001B27 (v00 HPQOEM TGL-ULT 00000002 01000013) [ 0.007627] ACPI: SSDT 0x000000003FB7F000 005DE0 (v02 DptfTb DptfTabl 00001000 INTL 20160527) [ 0.007629] ACPI: WSMT 0x000000003FB7D000 000028 (v01 HPQOEM 00000000 00000000) [ 0.007631] ACPI: DMAR 0x000000003FB7C000 0000B8 (v02 INTEL TGL 00000002 INTL 01000013) [ 0.007634] ACPI: SSDT 0x000000003FB74000 0074D3 (v02 HPQOEM MS-SSDT 00003000 INTL 20160527) [ 0.007636] ACPI: LPIT 0x000000003FB7E000 00005C (v01 HPQOEM TGL-ULT 00000002 01000013) [ 0.007638] ACPI: MCFG 0x000000003FB73000 00003C (v01 HPQOEM TGL-ULT 00000002 01000013) [ 0.007640] ACPI: SSDT 0x000000003FB72000 00019B (v01 HP HPNBCONV 00001000 INTL 20160527) [ 0.007642] ACPI: SSDT 0x000000003FB71000 000609 (v01 HP INTTPL 00001000 INTL 20160527) [ 0.007644] ACPI: SSDT 0x000000003FB6E000 0029E7 (v01 HP HPINNBWL 00001000 INTL 20160527) [ 0.007646] ACPI: SSDT 0x000000003FB6D000 000032 (v01 HP HPCONDEV 00001000 INTL 20160527) [ 0.007649] ACPI: SSDT 0x000000003FB6C000 000115 (v01 HP HPSANIMD 00001000 INTL 20160527) [ 0.007651] ACPI: SSDT 0x000000003FB6B000 000E17 (v02 HP HPINTELG 00001000 INTL 20160527) [ 0.007653] ACPI: SSDT 0x000000003FB6A000 000069 (v01 HP HPCAHWID 00001000 INTL 20160527) [ 0.007655] ACPI: UEFI 0x000000003FA9F000 00063A (v01 INTEL RstVmdE 00000000 ?? 00000000) [ 0.007657] ACPI: UEFI 0x000000003FA9E000 00005C (v01 INTEL RstVmdV 00000000 ?? 00000000) [ 0.007660] ACPI: BGRT 0x000000003FB68000 000038 (v01 HPQOEM TGL-ULT 00000002 01000013) [ 0.007662] ACPI: ASF! 0x000000003FB69000 0000A0 (v32 HPQOEM UYAMIHC 00000002 01000013) [ 0.007664] ACPI: PTDT 0x000000003FB67000 000024 (v00 HPQOEM SLIC-BPC 00000005 MSFT 0100000D) [ 0.007666] ACPI: SSDT 0x000000003FBE0000 0002F9 (v02 HP PwrCtlEv 00000001 INTL 20160527) [ 0.007668] ACPI: FPDT 0x000000003FB87000 000044 (v01 HPQOEM TGL-ULT 00000002 01000013) [ 0.007670] ACPI: Reserving FACP table memory at [mem 0x3fbca000-0x3fbca113] ACPI: Reserving DSDT table memory at [mem 0x3fb88000-0x3fbc7e0f] ACPI: Reserving FACS table memory at [mem 0x3faa4000-0x3faa403f] ACPI: Reserving SSDT table memory at [mem 0x3fbfb000-0x3fbfc87b] ACPI: Reserving SSDT table memory at [mem 0x3fbfa000-0x3fbfa2d6] ACPI: Reserving SSDT table memory at [mem 0x3fbf9000-0x3fbf9129] ACPI: Reserving SSDT table memory at [mem 0x3fbf6000-0x3fbf855b] ACPI: Reserving SSDT table memory at [mem 0x3fbea000-0x3fbf51d9] ACPI: Reserving RTMA table memory at [mem 0x3fbe9000-0x3fbe909d] ACPI: Reserving SSDT table memory at [mem 0x3fbe7000-0x3fbe8574] ACPI: Reserving SSDT table memory at [mem 0x3fbe6000-0x3fbe60fa] ACPI: Reserving OEML table memory at [mem 0x3fbe5000-0x3fbe5027] ACPI: Reserving SSDT table memory at [mem 0x3fbe4000-0x3fbe45fa] ACPI: Reserving TPM2 table memory at [mem 0x3fbe3000-0x3fbe304b] ACPI: Reserving SSDT table memory at [mem 0x3fbe1000-0x3fbe2d54] ACPI: Reserving SSDT table memory at [mem 0x3fbdd000-0x3fbdfe42] ACPI: Reserving SSDT table memory at [mem 0x3fbd9000-0x3fbdc374] ACPI: Reserving SSDT table memory at [mem 0x3fbcd000-0x3fbd86e2] ACPI: Reserving MSDM table memory at [mem 0x3fbcc000-0x3fbcc054] ACPI: Reserving WSMT table memory at [mem 0x3fbcb000-0x3fbcb027] ACPI: Reserving HPET table memory at [mem 0x3fbc9000-0x3fbc9037] ACPI: Reserving APIC table memory at [mem 0x3fbc8000-0x3fbc812b] ACPI: Reserving SSDT table memory at [mem 0x3fbfd000-0x3fbfd9e4] ACPI: Reserving NHLT table memory at [mem 0x3fb85000-0x3fb86b26] ACPI: Reserving SSDT table memory at [mem 0x3fb7f000-0x3fb84ddf] ACPI: Reserving WSMT table memory at [mem 0x3fb7d000-0x3fb7d027] ACPI: Reserving DMAR table memory at [mem 0x3fb7c000-0x3fb7c0b7] ACPI: Reserving SSDT table memory at [mem 0x3fb74000-0x3fb7b4d2] ACPI: Reserving LPIT table memory at [mem 0x3fb7e000-0x3fb7e05b] ACPI: Reserving MCFG table memory at [mem 0x3fb73000-0x3fb7303b] ACPI: Reserving SSDT table memory at [mem 0x3fb72000-0x3fb7219a] ACPI: Reserving SSDT table memory at [mem 0x3fb71000-0x3fb71608] ACPI: Reserving SSDT table memory at [mem 0x3fb6e000-0x3fb709e6] ACPI: Reserving SSDT table memory at [mem 0x3fb6d000-0x3fb6d031] ACPI: Reserving SSDT table memory at [mem 0x3fb6c000-0x3fb6c114] ACPI: Reserving SSDT table memory at [mem 0x3fb6b000-0x3fb6be16] ACPI: Reserving SSDT table memory at [mem 0x3fb6a000-0x3fb6a068] ACPI: Reserving UEFI table memory at [mem 0x3fa9f000-0x3fa9f639] ACPI: Reserving UEFI table memory at [mem 0x3fa9e000-0x3fa9e05b] ACPI: Reserving BGRT table memory at [mem 0x3fb68000-0x3fb68037] ACPI: Reserving ASF! table memory at [mem 0x3fb69000-0x3fb6909f] ACPI: Reserving PTDT table memory at [mem 0x3fb67000-0x3fb67023] ACPI: Reserving SSDT table memory at [mem 0x3fbe0000-0x3fbe02f8] ACPI: Reserving FPDT table memory at [mem 0x3fb87000-0x3fb87043] No NUMA configuration found [ 0.007912] Faking a node at [mem 0x0000000000000000-0x00000004af7fffff] NODE_DATA(0) allocated [mem 0x4af7d5000-0x4af7fffff] Zone ranges: [ 0.008019] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000004af7fffff] Device empty [ 0.008022] Movable zone start for each node [ 0.008023] Early memory node ranges [ 0.008024] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000003c88dfff] node 0: [mem 0x000000003fbff000-0x000000003fbfffff] node 0: [mem 0x0000000100000000-0x00000004af7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000004af7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008050] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.009246] On node 0, zone DMA32: 13169 pages in unavailable ranges [ 0.027079] On node 0, zone Normal: 1024 pages in unavailable ranges [ 0.027092] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.027113] Reserving Intel graphics memory at [mem 0x4c800000-0x507fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.027429] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.027430] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.027431] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.027431] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.027431] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.027432] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.027432] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.027433] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.027433] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.027434] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.027434] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.027435] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.027435] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.027436] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.027436] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.027437] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.027472] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.027474] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.027475] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.027478] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.027479] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.027489] e820: update [mem 0x34d56000-0x34dcbfff] usable ==> reserved [ 0.027495] TSC deadline timer available [ 0.027495] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.027503] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x34d56000-0x34dcbfff] PM: hibernation: Registered nosave memory: [mem 0x3c88e000-0x3fa90fff] PM: hibernation: Registered nosave memory: [mem 0x3fa91000-0x3fb32fff] PM: hibernation: Registered nosave memory: [mem 0x3fb33000-0x3fbfefff] PM: hibernation: Registered nosave memory: [mem 0x3fc00000-0x45ffffff] PM: hibernation: Registered nosave memory: [mem 0x46000000-0x469fffff] PM: hibernation: Registered nosave memory: [mem 0x46a00000-0x46bfffff] PM: hibernation: Registered nosave memory: [mem 0x46c00000-0x47bfffff] PM: hibernation: Registered nosave memory: [mem 0x47c00000-0x507fffff] PM: hibernation: Registered nosave memory: [mem 0x50800000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] [mem 0x50800000-0xfed1ffff] available for PCI devices [ 0.027513] Booting paravirtualized kernel on bare hardware [ 0.027515] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.027520] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.027967] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.027971] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.027973] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.027986] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-48-generic root=UUID=HASH_150-F548-B59F-C1A0-33F6E344BC92 ro quiet splash vt.handoff=7 [ 0.028037] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-48-generic", will be passed to user space. [ 0.029274] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.029876] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.029954] Fallback order for Node 0: 0 [ 0.029956] Built 1 zonelists, mobility grouping on. Total pages: 4048012 [ 0.029957] Policy zone: Normal [ 0.029962] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.029973] software IO TLB: area num 8. [ 0.062002] Memory: 15855196K/16449716K available (22528K kernel code, 4441K rwdata, 14316K rodata, 4976K init, 4732K bss, 594260K reserved, 0K cma-reserved) [ 0.062542] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.062562] ftrace: allocating 57904 entries in 227 pages [ 0.069185] ftrace: allocated 227 pages with 5 groups [ 0.069901] Dynamic Preempt: voluntary [ 0.069950] rcu: Preemptible hierarchical RCU implementation. [ 0.069950] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.069951] Trampoline variant of Tasks RCU enabled. [ 0.069952] Rude variant of Tasks RCU enabled. [ 0.069952] Tracing variant of Tasks RCU enabled. [ 0.069953] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.069953] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.071661] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.071948] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.072179] Console: colour dummy device 80x25 [ 0.072181] printk: legacy console [tty0] enabled [ 0.072210] ACPI: Core revision 20230628 [ 0.072472] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.072473] APIC: Switch to symmetric I/O mode setup [ 0.072474] DMAR: Host address width 39 [ 0.072475] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.072481] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.072483] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.072486] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.072487] DMAR: DRHD base: 0x000000fed85000 flags: 0x0 [ 0.072491] DMAR: dmar2: reg_base_addr fed85000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.072492] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.072496] DMAR: dmar3: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.072498] DMAR: RMRR base: 0x0000004c000000 end: 0x000000507fffff [ 0.072500] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 3 [ 0.072501] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.072501] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.074445] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.074447] x2apic enabled [ 0.074510] APIC: Switched APIC routing to: cluster x2apic [ 0.078966] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns [ 0.078973] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.40 BogoMIPS (lpj=2995200) [ 0.079001] CPU0: Thermal monitoring enabled (TM1) [ 0.079004] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.079115] process: using mwait in idle threads [ 0.079118] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.079119] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.079122] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.079125] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit [ 0.079125] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall [ 0.079126] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.079127] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.079127] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.079129] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.079130] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.079132] GDS: Mitigation: Microcode [ 0.079139] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.079140] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.079140] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.079141] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.079142] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.079142] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.079143] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.079143] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' [ 0.079144] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.079145] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.079145] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.079146] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.079147] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.079148] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 [ 0.079148] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format. [ 0.079970] Freeing SMP alternatives memory: 48K [ 0.079970] pid_max: default: 32768 minimum: 301 [ 0.079970] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.079970] landlock: Up and running. [ 0.079970] Yama: becoming mindful. [ 0.079970] AppArmor: AppArmor initialized [ 0.079970] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.079970] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.079970] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.079970] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.079970] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.079970] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.079970] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.079970] ... version: 5 [ 0.079970] ... bit width: 48 [ 0.079970] ... generic registers: 8 [ 0.079970] ... value mask: 0000ffffffffffff [ 0.079970] ... max period: 00007fffffffffff [ 0.079970] ... fixed-purpose events: 4 [ 0.079970] ... event mask: 0001000f000000ff [ 0.079970] signal: max sigframe size: 3632 [ 0.079970] Estimated ratio of average max frequency by base frequency (times 1024): 1467 [ 0.079970] rcu: Hierarchical SRCU implementation. [ 0.079970] rcu: Max phase no-delay instances is 400. [ 0.079970] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.079970] smp: Bringing up secondary CPUs ... [ 0.079970] smpboot: x86: Booting SMP configuration: [ 0.079970] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.082999] smp: Brought up 1 node, 8 CPUs [ 0.083005] smpboot: Max logical packages: 1 [ 0.083006] smpboot: Total of 8 processors activated (47923.20 BogoMIPS) [ 0.084648] devtmpfs: initialized [ 0.084648] x86/mm: Memory block size: 128MB [ 0.085670] ACPI: PM: Registering ACPI NVS region [mem 0x3fa91000-0x3fb32fff] (663552 bytes) [ 0.085670] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.085670] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.085670] pinctrl core: initialized pinctrl subsystem [ 0.085971] PM: RTC time: 17:37:28, date: 2024-11-16 [ 0.086301] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.086493] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.086606] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.086720] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.086739] thermal_sys: Registered thermal governor 'fair_share' [ 0.086739] thermal_sys: Registered thermal governor 'bang_bang' [ 0.086739] thermal_sys: Registered thermal governor 'step_wise' [ 0.086739] thermal_sys: Registered thermal governor 'user_space' [ 0.086739] thermal_sys: Registered thermal governor 'power_allocator' [ 0.086739] EISA bus registered [ 0.086739] cpuidle: using governor ladder [ 0.086739] cpuidle: using governor menu [ 0.086739] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.087015] PCI: ECAM [mem 0xc0000000-0xc54fffff] (base 0xc0000000) for domain 0000 [bus 00-54] PCI: Using configuration type 1 for base access [ 0.087131] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.088016] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.088016] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.088016] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.088016] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.088053] ACPI: Added _OSI(Module Device) [ 0.088054] ACPI: Added _OSI(Processor Device) [ 0.088055] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.088056] ACPI: Added _OSI(Processor Aggregator Device) [ 0.153636] ACPI: 24 ACPI AML tables successfully acquired and loaded [ 0.155645] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.164383] ACPI: Dynamic OEM Table Load: [ 0.164393] ACPI: SSDT 0xFFFF9A82C006D000 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.165609] ACPI: Dynamic OEM Table Load: [ 0.165616] ACPI: SSDT 0xFFFF9A82C0079800 000689 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.166590] ACPI: Dynamic OEM Table Load: [ 0.166596] ACPI: SSDT 0xFFFF9A82C0063A00 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.167453] ACPI: Dynamic OEM Table Load: [ 0.167460] ACPI: SSDT 0xFFFF9A82C006D400 000316 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.168481] ACPI: Dynamic OEM Table Load: [ 0.168488] ACPI: SSDT 0xFFFF9A82C187B000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.169524] ACPI: Dynamic OEM Table Load: [ 0.169529] ACPI: SSDT 0xFFFF9A82C007A000 00048A (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.170485] ACPI: Dynamic OEM Table Load: [ 0.170491] ACPI: SSDT 0xFFFF9A82C007A800 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.171437] ACPI: Dynamic OEM Table Load: [ 0.171443] ACPI: SSDT 0xFFFF9A82C007B000 00048A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.175115] ACPI: _OSC evaluated successfully for all CPUs [ 0.175149] ACPI: EC: EC started [ 0.175150] ACPI: EC: interrupt blocked [ 0.194090] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.194093] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.194094] ACPI: Interpreter enabled [ 0.194142] ACPI: PM: (supports S0 S3 S4 S5) [ 0.194143] ACPI: Using IOAPIC for interrupt routing [ 0.195302] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.195303] PCI: Ignoring E820 reservations for host bridge windows [ 0.196331] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.201493] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTPR: New power resource [ 0.210006] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource [ 0.210098] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource [ 0.210186] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource [ 0.215786] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 0.220312] ACPI: \_SB_.PC00.VMD0.VOL0.V0PR: New power resource [ 0.220356] ACPI: \_SB_.PC00.VMD0.VOL1.V1PR: New power resource [ 0.220397] ACPI: \_SB_.PC00.VMD0.VOL2.V2PR: New power resource [ 0.220438] ACPI: \_SB_.PC00.VMD0.VOL3.V3PR: New power resource [ 0.220513] ACPI: \_SB_.PC00.TBT0: New power resource [ 0.220563] ACPI: \_SB_.PC00.TBT1: New power resource [ 0.220609] ACPI: \_SB_.PC00.D3C_: New power resource [ 0.438295] ACPI: \PIN_: New power resource [ 0.438693] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-54]) [ 0.438698] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 0.446604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x50800000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-54] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 conventional PCI endpoint [ 0.446840] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.446847] pci 0000:00:02.0: BAR 0 [mem 0x603e000000-0x603effffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0x3000-0x303f] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.446871] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs [ 0.446899] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs [ 0.447038] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 conventional PCI endpoint [ 0.447053] pci 0000:00:04.0: BAR 0 [mem 0x603f240000-0x603f25ffff 64bit] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400 PCIe Root Port [ 0.447337] pci 0000:00:07.0: PCI bridge to [bus 01-2a] pci 0000:00:07.0: bridge window [mem 0x62000000-0x6e1fffff] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] pci 0000:00:07.0: Overriding RP PIO Log Size to 4 [ 0.447427] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.448153] pci 0000:00:07.1: [8086:9a25] type 01 class 0x060400 PCIe Root Port [ 0.448173] pci 0000:00:07.1: PCI bridge to [bus 2b-54] pci 0000:00:07.1: bridge window [mem 0x54000000-0x601fffff] pci 0000:00:07.1: bridge window [mem 0x6020000000-0x603bffffff 64bit pref] pci 0000:00:07.1: Overriding RP PIO Log Size to 4 [ 0.448260] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.449007] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint [ 0.449014] pci 0000:00:0a.0: BAR 0 [mem 0x603f290000-0x603f297fff 64bit] pci 0000:00:0a.0: enabling Extended Tags [ 0.449118] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 conventional PCI endpoint [ 0.449129] pci 0000:00:0d.0: BAR 0 [mem 0x603f280000-0x603f28ffff 64bit] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.449548] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 conventional PCI endpoint [ 0.449559] pci 0000:00:0d.2: BAR 0 [mem 0x603f200000-0x603f23ffff 64bit] pci 0000:00:0d.2: BAR 2 [mem 0x603f2a9000-0x603f2a9fff 64bit] pci 0000:00:0d.2: supports D1 D2 [ 0.449598] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449733] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400 PCIe Root Complex Integrated Endpoint [ 0.449745] pci 0000:00:0e.0: BAR 0 [mem 0x603c000000-0x603dffffff 64bit pref] pci 0000:00:0e.0: BAR 2 [mem 0x52000000-0x53ffffff] pci 0000:00:0e.0: BAR 4 [mem 0x603f100000-0x603f1fffff 64bit] pci 0000:00:12.0: [8086:a0fc] type 00 class 0x070000 conventional PCI endpoint [ 0.449988] pci 0000:00:12.0: BAR 0 [mem 0x603f270000-0x603f27ffff 64bit] pci 0000:00:12.0: PME# supported from D0 D3hot [ 0.450494] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 conventional PCI endpoint [ 0.450513] pci 0000:00:14.0: BAR 0 [mem 0x603f260000-0x603f26ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.450982] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 conventional PCI endpoint [ 0.451002] pci 0000:00:14.2: BAR 0 [mem 0x603f2a0000-0x603f2a3fff 64bit] pci 0000:00:14.2: BAR 2 [mem 0x603f2a8000-0x603f2a8fff 64bit] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint [ 0.451173] pci 0000:00:14.3: BAR 0 [mem 0x603f29c000-0x603f29ffff 64bit] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.451564] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 conventional PCI endpoint [ 0.451592] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000 conventional PCI endpoint [ 0.452065] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 conventional PCI endpoint [ 0.452453] pci 0000:00:16.0: BAR 0 [mem 0x603f2a5000-0x603f2a5fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.452956] pci 0000:00:16.3: [8086:a0e3] type 00 class 0x070002 conventional PCI endpoint [ 0.452973] pci 0000:00:16.3: BAR 0 [io 0x3060-0x3067] pci 0000:00:16.3: BAR 1 [mem 0x6e201000-0x6e201fff] pci 0000:00:1d.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 0.453674] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 conventional PCI endpoint [ 0.453989] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 conventional PCI endpoint [ 0.454031] pci 0000:00:1f.3: BAR 0 [mem 0x603f298000-0x603f29bfff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0x603f000000-0x603f0fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.454644] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 conventional PCI endpoint [ 0.454665] pci 0000:00:1f.4: BAR 0 [mem 0x603f2a4000-0x603f2a40ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 conventional PCI endpoint [ 0.454917] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] pci 0000:00:07.0: PCI bridge to [bus 01-2a] pci 0000:00:07.1: PCI bridge to [bus 2b-54] Low-power S0 idle used by default for system suspend [ 0.470956] ACPI: EC: interrupt unblocked [ 0.470957] ACPI: EC: event unblocked [ 0.470971] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.470972] ACPI: EC: GPE=0x6e [ 0.470973] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.470974] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 0.471030] iommu: Default domain type: Translated [ 0.471030] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.471070] SCSI subsystem initialized [ 0.471073] libata version 3.00 loaded. [ 0.471073] ACPI: bus type USB registered [ 0.471073] usbcore: registered new interface driver usbfs [ 0.471073] usbcore: registered new interface driver hub [ 0.471073] usbcore: registered new device driver usb [ 0.471073] pps_core: LinuxPPS API ver. 1 registered [ 0.471073] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.471073] PTP clock support registered [ 0.471073] EDAC MC: Ver: 3.0.0 [ 0.471133] efivars: Registered efivars operations [ 0.471133] NetLabel: Initializing [ 0.471133] NetLabel: domain hash size = 128 [ 0.471133] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.471142] NetLabel: unlabeled traffic allowed by default [ 0.471151] mctp: management component transport protocol core [ 0.471151] NET: Registered PF_MCTP protocol family [ 0.471151] PCI: Using ACPI for IRQ routing [ 0.473905] PCI: pci_cache_line_size set to 64 bytes [ 0.473996] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window [ 0.474085] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x34d56000-0x37ffffff] e820: reserve RAM buffer [mem 0x3c88e000-0x3fffffff] e820: reserve RAM buffer [mem 0x3fc00000-0x3fffffff] e820: reserve RAM buffer [mem 0x4af800000-0x4afffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.474110] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.474110] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.474110] vgaarb: loaded [ 0.474110] clocksource: Switched to clocksource tsc-early [ 0.474465] VFS: Disk quotas dquot_6.6.0 [ 0.474472] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.474568] AppArmor: AppArmor Filesystem Enabled [ 0.474589] pnp: PnP ACPI init [ 0.474864] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.474866] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.474974] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.475039] system 00:04: [io 0x0200-0x027f] has been reserved [ 0.475040] system 00:04: [mem 0xfedf0000-0xfedfffff] has been reserved [ 0.475345] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.475360] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.475361] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.475362] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.475363] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.475364] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.475365] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.476429] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.476430] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.476431] system 00:06: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.476432] system 00:06: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.476433] system 00:06: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.476434] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.476435] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.476436] system 00:06: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.476436] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.476437] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.476696] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.477008] system 00:08: [mem 0xfe042008-0xfe042fff] has been reserved [ 0.477009] system 00:08: [mem 0xfe043000-0xfe043fff] has been reserved [ 0.477168] system 00:09: [mem 0xfe042000-0xfe042007] has been reserved [ 0.477376] pnp: PnP ACPI: found 10 devices [ 0.482645] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.482700] NET: Registered PF_INET protocol family [ 0.482888] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.493429] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.493452] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.493489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.493684] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.493822] TCP: Hash tables configured (established 131072 bind 65536) [ 0.493882] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.493906] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.493927] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.493974] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.493979] NET: Registered PF_XDP protocol family [ 0.493985] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.493993] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned [ 0.493996] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned [ 0.493999] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned [ 0.494000] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned [ 0.494001] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned [ 0.494058] pci 0000:00:15.1: BAR 0 [mem 0x4017001000-0x4017001fff 64bit]: assigned [ 0.494073] pci 0000:00:1f.5: BAR 0 [mem 0x50800000-0x50800fff]: assigned [ 0.494083] pci 0000:00:07.0: PCI bridge to [bus 01-2a] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] pci 0000:00:07.0: bridge window [mem 0x62000000-0x6e1fffff] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] pci 0000:00:07.1: PCI bridge to [bus 2b-54] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] pci 0000:00:07.1: bridge window [mem 0x54000000-0x601fffff] pci 0000:00:07.1: bridge window [mem 0x6020000000-0x603bffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x50800000-0xbfffffff window] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0x62000000-0x6e1fffff] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] pci_bus 0000:2b: resource 1 [mem 0x54000000-0x601fffff] pci_bus 0000:2b: resource 2 [mem 0x6020000000-0x603bffffff 64bit pref] pci 0000:00:0d.0: enabling device (0000 -> 0002) [ 0.494320] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.494680] PCI: CLS 0 bytes, default 64 [ 0.494713] DMAR: No ATSR found [ 0.494714] DMAR: No SATC found [ 0.494715] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.494716] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.494716] DMAR: IOMMU feature nwfs inconsistent [ 0.494717] DMAR: IOMMU feature dit inconsistent [ 0.494717] DMAR: IOMMU feature sc_support inconsistent [ 0.494718] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.494718] DMAR: dmar2: Using Queued invalidation [ 0.494722] DMAR: dmar1: Using Queued invalidation [ 0.494724] DMAR: dmar0: Using Queued invalidation [ 0.494725] DMAR: dmar3: Using Queued invalidation [ 0.494759] Trying to unpack rootfs image as initramfs... [ 0.494897] pci 0000:00:07.1: Adding to iommu group 0 [ 0.494952] pci 0000:00:07.0: Adding to iommu group 1 [ 0.494995] pci 0000:00:02.0: Adding to iommu group 2 [ 0.495237] pci 0000:00:00.0: Adding to iommu group 3 [ 0.495244] pci 0000:00:04.0: Adding to iommu group 4 [ 0.495249] pci 0000:00:0a.0: Adding to iommu group 5 [ 0.495258] pci 0000:00:0d.0: Adding to iommu group 6 [ 0.495263] pci 0000:00:0d.2: Adding to iommu group 6 [ 0.495269] pci 0000:00:0e.0: Adding to iommu group 7 [ 0.495276] pci 0000:00:12.0: Adding to iommu group 8 [ 0.495285] pci 0000:00:14.0: Adding to iommu group 9 [ 0.495291] pci 0000:00:14.2: Adding to iommu group 9 [ 0.495296] pci 0000:00:14.3: Adding to iommu group 10 [ 0.495305] pci 0000:00:15.0: Adding to iommu group 11 [ 0.495311] pci 0000:00:15.1: Adding to iommu group 11 [ 0.495321] pci 0000:00:16.0: Adding to iommu group 12 [ 0.495328] pci 0000:00:16.3: Adding to iommu group 12 [ 0.495335] pci 0000:00:1d.0: Adding to iommu group 13 [ 0.495348] pci 0000:00:1f.0: Adding to iommu group 14 [ 0.495354] pci 0000:00:1f.3: Adding to iommu group 14 [ 0.495360] pci 0000:00:1f.4: Adding to iommu group 14 [ 0.495367] pci 0000:00:1f.5: Adding to iommu group 14 [ 0.495936] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.495937] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.495938] software IO TLB: mapped [mem 0x000000002a950000-0x000000002e950000] (64MB) [ 0.495999] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff] caller __uncore_imc_init_box+0x100/0x150 mapping multiple BARs [ 0.497942] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns [ 0.497955] clocksource: Switched to clocksource tsc [ 0.498318] Initialise system trusted keyrings [ 0.498324] Key type blacklist registered [ 0.498346] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.498352] zbud: loaded [ 0.498489] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.498553] fuse: init (API version 7.39) [ 0.498628] integrity: Platform Keyring initialized [ 0.498631] integrity: Machine keyring initialized [ 0.504854] Key type asymmetric registered [ 0.504855] Asymmetric key parser 'x509' registered [ 0.504865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.504890] io scheduler mq-deadline registered [ 0.505208] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 [ 0.505223] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.505474] pcieport 0000:00:07.1: PME: Signaling with IRQ 125 [ 0.505487] pcieport 0000:00:07.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.505594] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.505776] Monitor-Mwait will be used to enter C-1 state [ 0.505797] Monitor-Mwait will be used to enter C-2 state [ 0.505800] Monitor-Mwait will be used to enter C-3 state [ 0.505804] ACPI: \_SB_.PR00: Found 3 idle states [ 0.506193] ACPI: AC: AC Adapter [AC] (on-line) [ 0.506234] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.506244] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.506264] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.506283] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.506413] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.511088] ACPI: thermal: Thermal Zone [CPUZ] (49 C) [ 0.514524] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.514525] ACPI: thermal: Thermal Zone [GFXZ] (25 C) [ 0.517207] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.517208] ACPI: thermal: Thermal Zone [EXTZ] (47 C) [ 0.520201] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.520202] ACPI: thermal: Thermal Zone [LOCZ] (29 C) [ 0.525081] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.525083] ACPI: thermal: Thermal Zone [BATZ] (31 C) [ 0.527960] thermal LNXTHERM:05: registered as thermal_zone5 [ 0.527962] ACPI: thermal: Thermal Zone [CHGZ] (43 C) [ 0.528016] thermal LNXTHERM:06: registered as thermal_zone6 [ 0.528017] ACPI: thermal: Thermal Zone [BAGZ] (30 C) [ 0.531016] thermal LNXTHERM:07: registered as thermal_zone7 [ 0.531018] ACPI: thermal: Thermal Zone [PCHZ] (0 C) [ 0.531313] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.532659] serial 0000:00:12.0: enabling device (0000 -> 0002) [ 0.532875] serial 0000:00:16.3: enabling device (0001 -> 0003) [ 0.547786] ACPI: battery: Slot [BAT0] (battery present) [ 0.553626] 0000:00:16.3: ttyS4 at I/O 0x3060 (irq = 19, base_baud = 115200) is a 16550A [ 0.554068] hpet_acpi_add: no address or irqs in _CRS [ 0.554087] Linux agpgart interface v0.103 [ 0.558620] tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22) [ 0.568128] Freeing initrd memory: 64204K [ 0.580562] loop: module loaded [ 0.580787] ACPI: bus type drm_connector registered [ 0.580958] tun: Universal TUN/TAP device driver, 1.6 [ 0.580976] PPP generic driver version 2.4.2 [ 0.581037] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.581038] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.581490] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.581545] mousedev: PS/2 mouse device common for all mice [ 0.581694] rtc_cmos 00:01: RTC can wake from S4 [ 0.582591] rtc_cmos 00:01: registered as rtc0 [ 0.582770] rtc_cmos 00:01: setting system clock to 2024-11-16T17:37:28 UTC (1731778648) [ 0.582799] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.582808] i2c_dev: i2c /dev entries driver [ 0.583237] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.583245] device-mapper: uevent: version 1.0.3 [ 0.583274] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.583287] platform eisa.0: Probing EISA bus 0 [ 0.583289] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.583290] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.583290] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.583291] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.583292] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.583292] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.583293] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.583294] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.583294] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.583295] platform eisa.0: EISA: Detected 0 cards [ 0.583298] intel_pstate: Intel P-state driver initializing [ 0.583877] intel_pstate: HWP enabled [ 0.583980] ledtrig-cpu: registered to indicate activity on CPUs [ 0.584179] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.584908] fbcon: Deferring console take-over [ 0.584909] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.584972] drop_monitor: Initializing network drop monitor service [ 0.585050] NET: Registered PF_INET6 protocol family [ 0.588697] Segment Routing with IPv6 [ 0.588701] In-situ OAM (IOAM) with IPv6 [ 0.588718] NET: Registered PF_PACKET protocol family [ 0.588739] Key type dns_resolver registered [ 0.589189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.589241] microcode: Current revision: 0x000000b8 [ 0.589328] resctrl: L2 allocation detected [ 0.589338] IPI shorthand broadcast: enabled [ 0.590269] sched_clock: Marking stable (583001048, 6849134)->(625176891, -35326709) [ 0.590361] registered taskstats version 1 [ 0.590491] Loading compiled-in X.509 certificates [ 0.590889] Loaded X.509 cert 'Build time autogenerated kernel key: e13f5fac25ba0248e211b752d6790eb60e5be51d' [ 0.591232] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.591571] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.591572] blacklist: Loading compiled-in revocation X.509 certificates [ 0.591583] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.591591] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.591599] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.591607] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.591617] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.591625] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.591633] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.591641] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.593574] Key type .fscrypt registered [ 0.593575] Key type fscrypt-provisioning registered [ 0.593609] Key type trusted registered [ 0.598903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.600929] Key type encrypted registered [ 0.600942] AppArmor: AppArmor sha256 policy hashing enabled [ 0.601406] integrity: Loading X.509 certificate: UEFI:db [ 0.601423] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.601424] integrity: Loading X.509 certificate: UEFI:db [ 0.601435] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.601436] integrity: Loading X.509 certificate: UEFI:db [ 0.601446] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.602406] Loading compiled-in module X.509 certificates [ 0.602761] Loaded X.509 cert 'Build time autogenerated kernel key: e13f5fac25ba0248e211b752d6790eb60e5be51d' [ 0.602762] ima: Allocated hash algorithm: sha256 [ 0.647149] ima: No architecture policies found [ 0.647216] evm: Initialising EVM extended attributes: [ 0.647219] evm: security.selinux [ 0.647222] evm: security.SMACK64 [ 0.647225] evm: security.SMACK64EXEC [ 0.647227] evm: security.SMACK64TRANSMUTE [ 0.647229] evm: security.SMACK64MMAP [ 0.647231] evm: security.apparmor [ 0.647233] evm: security.ima [ 0.647235] evm: security.capability [ 0.647237] evm: HMAC attrs: 0x1 [ 0.647998] PM: Magic number: 0:618:643 [ 0.653459] RAS: Correctable Errors collector initialized. [ 0.653552] clk: Disabling unused clocks [ 0.664584] Freeing unused decrypted memory: 2028K [ 0.665245] Freeing unused kernel image (initmem) memory: 4976K [ 0.665247] Write protecting the kernel read-only data: 36864k [ 0.665476] Freeing unused kernel image (rodata/data gap) memory: 20K [ 0.672746] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.672750] Run /init as init process [ 0.672751] with arguments: [ 0.672752] /init [ 0.672753] splash [ 0.672753] with environment: [ 0.672753] HOME=/ [ 0.672754] TERM=linux [ 0.672754] BOOT_IMAGE=/boot/vmlinuz-6.8.0-48-generic [ 0.749594] hid: raw HID events driver (C) Jiri Kosina [ 0.751441] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_7D1-911A-5F14-78EF-632E1637A197 has zero instances [ 0.751474] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_362-801B-1C3D-2638-F8882CF5E53F has zero instances [ 0.753593] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 0.753600] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 0.754186] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 [ 0.754188] pci_bus 10000:e0: root bus resource [bus e0-ff] pci_bus 10000:e0: root bus resource [mem 0x52000000-0x53ffffff] pci_bus 10000:e0: root bus resource [mem 0x603f102000-0x603f1fffff 64bit] pci 10000:e0:1d.0: [8086:a0b0] type 01 class 0x060400 PCIe Root Port [ 0.754268] pci 10000:e0:1d.0: PCI bridge to [bus e1] pci 10000:e0:1d.0: bridge window [io 0x0000-0x0fff] pci 10000:e0:1d.0: bridge window [mem 0x52000000-0x520fffff] pci 10000:e0:1d.0: PME# supported from D0 D3hot D3cold [ 0.754383] pci 10000:e0:1d.0: PTM enabled (root), 4ns granularity [ 0.754740] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 0.755255] wmi_bus wmi_bus-PNP0C14:02: WQZZ data block query control method not found [ 0.755576] pci 10000:e0:1d.0: Adding to iommu group 7 [ 0.755622] pci 10000:e0:1d.2: [8086:a0b2] type 01 class 0x060400 PCIe Root Port [ 0.755651] pci 10000:e0:1d.2: PCI bridge to [bus e2] pci 10000:e0:1d.2: bridge window [io 0x0000-0x0fff] pci 10000:e0:1d.2: bridge window [mem 0x52100000-0x521fffff] pci 10000:e0:1d.2: PME# supported from D0 D3hot D3cold [ 0.755760] pci 10000:e0:1d.2: PTM enabled (root), 4ns granularity [ 0.756170] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 0.756175] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 0.756178] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.756192] pci 10000:e0:1d.2: Adding to iommu group 7 [ 0.756211] pci 10000:e0:1d.0: Primary bus is hard wired to 0 [ 0.756261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 0.756264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.756265] usb usb1: Product: xHCI Host Controller [ 0.756267] usb usb1: Manufacturer: Linux 6.8.0-48-generic xhci-hcd [ 0.756268] usb usb1: SerialNumber: ... [ 0.756364] pci 10000:e1:00.0: [8086:0975] type 00 class 0x010802 PCIe Endpoint [ 0.756403] pci 10000:e1:00.0: BAR 0 [mem 0x52000000-0x52003fff 64bit] hub 1-0:1.0: USB hub found [ 0.756682] hub 1-0:1.0: 1 port detected [ 0.756939] pci 10000:e1:00.0: Adding to iommu group 7 [ 0.756996] pci 10000:e0:1d.0: PCI bridge to [bus e1] pci 10000:e0:1d.2: Primary bus is hard wired to 0 [ 0.757114] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 0.757116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.757118] usb usb2: Product: xHCI Host Controller [ 0.757118] usb usb2: Manufacturer: Linux 6.8.0-48-generic xhci-hcd [ 0.757119] usb usb2: SerialNumber: ... [ 0.757168] pci 10000:e2:00.0: [8086:0975] type 00 class 0x010802 PCIe Endpoint [ 0.757197] pci 10000:e2:00.0: BAR 0 [mem 0x52100000-0x52103fff 64bit] pci 10000:e2:00.0: enabling Extended Tags [ 0.757849] pci 10000:e2:00.0: Adding to iommu group 7 [ 0.757910] pci 10000:e0:1d.2: PCI bridge to [bus e2] pci 10000:e0:1d.0: Primary bus is hard wired to 0 [ 0.757928] pci 10000:e0:1d.2: Primary bus is hard wired to 0 [ 0.757974] hub 2-0:1.0: USB hub found [ 0.757989] hub 2-0:1.0: 4 ports detected [ 0.761000] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.761007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.762168] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 0.763759] ACPI: bus type thunderbolt registered [ 0.765312] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.765316] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.765320] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.765410] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 0.765413] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.765415] usb usb3: Product: xHCI Host Controller [ 0.765416] usb usb3: Manufacturer: Linux 6.8.0-48-generic xhci-hcd [ 0.765417] usb usb3: SerialNumber: ... [ 0.765868] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 0.766672] hub 3-0:1.0: USB hub found [ 0.766797] hub 3-0:1.0: 12 ports detected [ 0.767810] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 0.779593] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 0.779596] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.779597] usb usb4: Product: xHCI Host Controller [ 0.779598] usb usb4: Manufacturer: Linux 6.8.0-48-generic xhci-hcd [ 0.779599] usb usb4: SerialNumber: ... [ 0.779664] hub 4-0:1.0: USB hub found [ 0.779677] hub 4-0:1.0: 4 ports detected [ 0.790894] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 0.791128] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 0.935114] pci 10000:e0:1d.0: bridge window [mem 0x52000000-0x520fffff]: assigned [ 0.935120] pci 10000:e0:1d.2: bridge window [mem 0x52100000-0x521fffff]: assigned [ 0.935121] pci 10000:e0:1d.0: bridge window [io size 0x1000]: can't assign; no space [ 0.935123] pci 10000:e0:1d.0: bridge window [io size 0x1000]: failed to assign [ 0.935123] pci 10000:e0:1d.2: bridge window [io size 0x1000]: can't assign; no space [ 0.935124] pci 10000:e0:1d.2: bridge window [io size 0x1000]: failed to assign [ 0.935126] pci 10000:e1:00.0: BAR 0 [mem 0x52000000-0x52003fff 64bit]: assigned [ 0.935144] pci 10000:e0:1d.0: PCI bridge to [bus e1] pci 10000:e0:1d.0: bridge window [mem 0x52000000-0x520fffff] pci 10000:e2:00.0: BAR 0 [mem 0x52100000-0x52103fff 64bit]: assigned [ 0.935171] pci 10000:e0:1d.2: PCI bridge to [bus e2] pci 10000:e0:1d.2: bridge window [mem 0x52100000-0x521fffff] pci 10000:e1:00.0: VMD: Default LTR value set by driver [ 0.935277] pci 10000:e2:00.0: VMD: Default LTR value set by driver [ 0.935303] pcieport 10000:e0:1d.0: can't derive routing for PCI INT A [ 0.935304] pcieport 10000:e0:1d.0: PCI INT A: no GSI [ 0.935419] pcieport 10000:e0:1d.0: PME: Signaling with IRQ 179 [ 0.935526] pcieport 10000:e0:1d.2: can't derive routing for PCI INT C [ 0.935527] pcieport 10000:e0:1d.2: PCI INT C: no GSI [ 0.935594] pcieport 10000:e0:1d.2: PME: Signaling with IRQ 180 [ 0.935707] vmd 0000:00:0e.0: Bound to PCI domain 10000 [ 1.017024] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 1.076752] input: SYNA30B8:00 06CB:CE1A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA30B8:00/0018:06CB:CE1A.0001/input/input5 [ 1.076810] input: SYNA30B8:00 06CB:CE1A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA30B8:00/0018:06CB:CE1A.0001/input/input6 [ 1.076867] hid-generic 0018:06CB:CE1A.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA30B8:00 06CB:CE1A] on i2c-SYNA30B8:00 [ 1.077161] input: WACF4233:00 056A:4998 Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input8 [ 1.077198] input: WACF4233:00 056A:4998 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input9 [ 1.077220] input: WACF4233:00 056A:4998 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input10 [ 1.077254] input: WACF4233:00 056A:4998 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input11 [ 1.077287] input: WACF4233:00 056A:4998 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input12 [ 1.077325] hid-generic 0018:056A:4998.0002: input,hidraw1: I2C HID v1.00 Mouse [WACF4233:00 056A:4998] on i2c-WACF4233:00 [ 1.079315] usbcore: registered new interface driver usbhid [ 1.079318] usbhid: USB HID core driver [ 1.081086] nvme nvme1: pci function 10000:e2:00.0 [ 1.081087] nvme nvme0: pci function 10000:e1:00.0 [ 1.084450] pcieport 10000:e0:1d.0: can't derive routing for PCI INT A [ 1.084452] nvme 10000:e1:00.0: PCI INT A: not connected [ 1.084456] pcieport 10000:e0:1d.2: can't derive routing for PCI INT A [ 1.084458] nvme 10000:e2:00.0: PCI INT A: no GSI [ 1.090822] nvme nvme0: 8/0/0 default/read/poll queues [ 1.094032] nvme0n1: p1 p2 [ 1.106022] nvme nvme1: 8/0/0 default/read/poll queues [ 1.147430] usb 3-1: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01 [ 1.147437] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.147440] usb 3-1: Product: USB Receiver [ 1.147443] usb 3-1: Manufacturer: Logitech [ 1.150771] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C548.0003/input/input13 [ 1.159063] input: SYNA30B8:00 06CB:CE1A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA30B8:00/0018:06CB:CE1A.0001/input/input14 [ 1.219432] hid-generic 0003:046D:C548.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 [ 1.219823] input: SYNA30B8:00 06CB:CE1A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA30B8:00/0018:06CB:CE1A.0001/input/input15 [ 1.221003] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C548.0004/input/input17 [ 1.235587] hid-multitouch 0018:06CB:CE1A.0001: input,hidraw2: I2C HID v1.00 Mouse [SYNA30B8:00 06CB:CE1A] on i2c-SYNA30B8:00 [ 1.235692] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C548.0004/input/input18 [ 1.314438] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C548.0004/input/input19 [ 1.328249] hid-generic 0003:046D:C548.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 [ 1.329776] hid-generic 0003:046D:C548.0005: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2 [ 1.330031] wacom 0018:056A:4998.0002: hidraw4: I2C HID v1.00 Mouse [WACF4233:00 056A:4998] on i2c-WACF4233:00 [ 1.330124] input: Wacom HID 4998 Pen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input20 [ 1.330260] input: Wacom HID 4998 Finger as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF4233:00/0018:056A:4998.0002/input/input21 [ 1.444039] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1.602966] usb 3-2: New USB device found, idVendor=0408, idProduct=5349, bcdDevice= 0.07 [ 1.602978] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.602982] usb 3-2: Product: HP HD Camera [ 1.602985] usb 3-2: Manufacturer: Quanta [ 1.602988] usb 3-2: SerialNumber: ... [ 1.732039] usb 3-7: new full-speed USB device number 4 using xhci_hcd [ 1.861409] usb 3-7: New USB device found, idVendor=06cb, idProduct=00e9, bcdDevice= 0.00 [ 1.861420] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.861423] usb 3-7: SerialNumber: ... [ 1.979032] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 2.108299] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02 [ 2.108311] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.958414] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 [ 3.969643] hid-generic 001F:8087:0AC2.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.976073] hid-generic 001F:8087:0AC2.0007: hidraw6: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.982044] hid-generic 001F:8087:0AC2.0008: hidraw7: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.987437] hid-generic 001F:8087:0AC2.0009: hidraw8: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.993504] hid-generic 001F:8087:0AC2.000A: hidraw9: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.997572] hid-generic 001F:8087:0AC2.000B: hidraw10: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 3.999764] hid-sensor-hub 001F:8087:0AC2.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.000622] hid-sensor-hub 001F:8087:0AC2.0007: hidraw6: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.001516] hid-sensor-hub 001F:8087:0AC2.0008: hidraw7: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.002391] hid-sensor-hub 001F:8087:0AC2.0009: hidraw8: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.003220] hid-sensor-hub 001F:8087:0AC2.000A: hidraw9: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.003587] hid-sensor-hub 001F:8087:0AC2.000B: hidraw10: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 4.020642] EXT4-fs (nvme0n1p2): mounted filesystem HASH_150-F548-B59F-C1A0-33F6E344BC92 ro with ordered data mode. Quota mode: none. [ 4.392804] pstore: Using crash dump compression: deflate [ 4.424982] EXT4-fs (nvme0n1p2): re-mounted HASH_150-F548-B59F-C1A0-33F6E344BC92 r/w. Quota mode: none. [ 4.426381] pstore: Registered efi_pstore as persistent store backend [ 4.427825] lp: driver loaded but no devices found [ 4.430398] ppdev: user-space parallel port driver [ 4.434592] Adding 4194300k swap on /swap.img. Priority:-2 extents:34 across:223739904k SS [ 4.459311] loop0: detected capacity change from 0 to 8 [ 4.459342] loop1: detected capacity change from 0 to 151296 [ 4.459369] loop2: detected capacity change from 0 to 152112 [ 4.460168] loop3: detected capacity change from 0 to 560352 [ 4.461905] loop4: detected capacity change from 0 to 559056 [ 4.462718] loop5: detected capacity change from 0 to 21952 [ 4.464731] loop6: detected capacity change from 0 to 22752 [ 4.465136] loop7: detected capacity change from 0 to 1034424 [ 4.465790] loop8: detected capacity change from 0 to 187776 [ 4.466837] loop9: detected capacity change from 0 to 14080 [ 4.468159] loop10: detected capacity change from 0 to 14032 [ 4.468820] loop11: detected capacity change from 0 to 203936 [ 4.470282] loop12: detected capacity change from 0 to 21584 [ 4.472039] loop13: detected capacity change from 0 to 21848 [ 4.473042] loop14: detected capacity change from 0 to 79520 [ 4.473339] loop15: detected capacity change from 0 to 1000 [ 4.474353] loop16: detected capacity change from 0 to 1136 [ 4.476314] loop17: detected capacity change from 0 to 887208 [ 4.476844] loop18: detected capacity change from 0 to 912168 [ 4.478332] loop19: detected capacity change from 0 to 1110944 [ 4.479052] loop20: detected capacity change from 0 to 1110048 [ 4.589630] input: Wireless hotkeys as /devices/virtual/input/input23 [ 4.601448] input: Intel HID events as /devices/platform/INTC1051:00/input/input24 [ 4.606204] Consider using thermal netlink events interface [ 4.627575] intel_pmc_core INT33A1:00: initialized [ 4.654165] EDAC igen6: v2.5.1 [ 4.674125] mc: Linux media interface: v0.10 [ 4.675904] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 4.676123] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.676171] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.681684] i2c i2c-2: 8/8 memory slots populated (from DMI) [ 4.702529] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.703503] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.703895] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.704063] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.722065] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.722068] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.722069] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.722070] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.722070] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.724474] cryptd: max_cpu_qlen set to 1000 [ 4.730602] hp_wmi: query 0x4 returned error 0x5 [ 4.733655] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.733725] videodev: Linux video capture interface: v2.00 [ 4.735329] AVX2 version of gcm_enc/dec engaged. [ 4.735425] intel_rapl_common: Found RAPL domain package [ 4.740486] AES CTR mode by8 optimization enabled [ 4.741093] input: HP WMI hotkeys as /devices/virtual/input/input25 [ 4.749264] Intel(R) Wireless WiFi driver for Linux [ 4.749339] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 4.755980] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 [ 4.756002] iwlwifi 0000:00:14.3: PCI dev a0f0/0070, rev=0x351, rfid=0x10a100 [ 4.766589] Bluetooth: Core ver 2.22 [ 4.766895] NET: Registered PF_BLUETOOTH protocol family [ 4.766897] Bluetooth: HCI device and connection manager initialized [ 4.766901] Bluetooth: HCI socket layer initialized [ 4.766941] Bluetooth: L2CAP socket layer initialized [ 4.766946] Bluetooth: SCO socket layer initialized [ 4.770988] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 4.771255] iwlwifi 0000:00:14.3: loaded firmware version 77.ad46c98b.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm [ 4.783265] usb 3-2: Found UVC 1.50 device HP HD Camera (0408:5349) [ 4.833024] usb 3-2: Found UVC 1.50 device HP HD Camera (0408:5349) [ 4.860704] usbcore: registered new interface driver uvcvideo [ 5.083535] intel_rapl_msr: PL4 support detected. [ 5.083612] intel_rapl_common: Found RAPL domain package [ 5.083616] intel_rapl_common: Found RAPL domain core [ 5.083619] intel_rapl_common: Found RAPL domain uncore [ 5.083622] intel_rapl_common: Found RAPL domain psys [ 5.088224] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 5.097344] Creating 1 MTD partitions on "0000:00:1f.5": [ 5.097350] 0x000000000000-0x000002000000 : "BIOS" [ 5.115070] i915 0000:00:02.0: vgaarb: deactivate vga console [ 5.115132] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 5.115653] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351 [ 5.115689] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.115719] thermal thermal_zone12: failed to read out thermal zone (-61) [ 5.116607] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 5.118065] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12) [ 5.127030] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 5.127218] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 5.147298] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1 [ 5.149178] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.149546] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26 [ 5.149719] i915 display info: display version: 12 [ 5.149721] i915 display info: cursor_needs_physical: no [ 5.149722] i915 display info: has_cdclk_crawl: no [ 5.149723] i915 display info: has_cdclk_squash: no [ 5.149724] i915 display info: has_ddi: yes [ 5.149725] i915 display info: has_dp_mst: yes [ 5.149726] i915 display info: has_dsb: yes [ 5.149727] i915 display info: has_fpga_dbg: yes [ 5.149728] i915 display info: has_gmch: no [ 5.149729] i915 display info: has_hotplug: yes [ 5.149730] i915 display info: has_hti: no [ 5.149731] i915 display info: has_ipc: yes [ 5.149732] i915 display info: has_overlay: no [ 5.149733] i915 display info: has_psr: yes [ 5.149734] i915 display info: has_psr_hw_tracking: yes [ 5.149735] i915 display info: overlay_needs_physical: no [ 5.149736] i915 display info: supports_tv: no [ 5.149737] i915 display info: has_hdcp: yes [ 5.149738] i915 display info: has_dmc: yes [ 5.149739] i915 display info: has_dsc: yes [ 5.151951] fbcon: i915drmfb (fb0) is primary device [ 5.151953] fbcon: Deferring console take-over [ 5.151954] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.168754] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.168842] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.170620] intel_tcc_cooling: TCC Offset locked [ 5.181141] usbcore: registered new interface driver btusb [ 5.182872] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018 [ 5.183878] Bluetooth: hci0: Device revision is 2 [ 5.183880] Bluetooth: hci0: Secure boot is enabled [ 5.183881] Bluetooth: hci0: OTP lock is enabled [ 5.183882] Bluetooth: hci0: API lock is enabled [ 5.183882] Bluetooth: hci0: Debug lock is disabled [ 5.183883] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.189295] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi [ 5.189309] Bluetooth: hci0: Boot Address: 0x24800 [ 5.189310] Bluetooth: hci0: Firmware Version: 249-27.23 [ 5.294089] iwlwifi 0000:00:14.3: Detected RF HR B5, rfid=0x10a100 [ 5.325171] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.325276] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.325288] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.325504] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 5.325560] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.332117] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 5.353314] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 [ 5.353319] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 5.353322] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 4 [ 5.356416] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware paths/files for ipc type 0: [ 5.356419] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware file: intel/sof/sof-tgl.ri [ 5.356420] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology file: intel/sof-tplg/sof-hda-generic-4ch.tplg [ 5.357327] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 5.357329] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.357333] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 5.359644] iwlwifi 0000:00:14.3: base HW address: 7E00C3EBF5F13F7B085C6721E40C5874 [ 5.376185] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0 [ 5.447545] RPC: Registered named UNIX socket transport module. [ 5.447551] RPC: Registered udp transport module. [ 5.447552] RPC: Registered tcp transport module. [ 5.447553] RPC: Registered tcp-with-tls transport module. [ 5.447554] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.456414] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 5.456418] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.465798] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.466109] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 5.487987] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.487992] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.487994] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.487995] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.487995] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.487997] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 5.641050] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.641054] Bluetooth: BNEP filters: protocol multicast [ 5.641058] Bluetooth: BNEP socket layer initialized [ 5.769870] block nvme0n1: No UUID available providing old NGUID [ 5.848175] NET: Registered PF_QIPCRTR protocol family [ 5.874917] loop21: detected capacity change from 0 to 8 [ 5.961253] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230628/psargs-330) [ 5.961268] [ 5.961270] No Local Variables are initialized for Method [_OSC] [ 5.961272] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 5.961273] Arg0: 00000000f148a095 <Obj> Buffer(16) 5D A8 3B B2 B7 C8 42 35 [ 5.961286] Arg1: 000000002fa2d496 <Obj> Integer 0000000000000001 [ 5.961291] Arg2: 0000000016ea8947 <Obj> Integer 0000000000000002 [ 5.961296] Arg3: 0000000055bdcaa9 <Obj> Buffer(8) 00 00 00 00 05 00 00 00 [ 5.961305] [ 5.961307] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529) [ 6.264370] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 6.280471] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input27 [ 6.280513] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input28 [ 6.280540] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input29 [ 6.280568] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input30 [ 6.280602] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input31 [ 6.315555] hid-sensor-hub 001F:8087:0AC2.0007: hid_field_extract() called with n (192) > 32! (kworker/5:1) [ 6.434796] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 6.892283] Bluetooth: hci0: Waiting for firmware download to complete [ 6.893858] Bluetooth: hci0: Firmware loaded in 1664606 usecs [ 6.893903] Bluetooth: hci0: Waiting for device to boot [ 6.908860] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 6.908876] Bluetooth: hci0: Device booted in 14634 usecs [ 6.909306] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc [ 6.910864] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.911892] Bluetooth: hci0: Firmware revision 0.4 build 249 week 27 2023 [ 6.913886] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 6.979203] Bluetooth: MGMT ver 1.22 [ 6.981744] NET: Registered PF_ALG protocol family [ 6.995343] Bluetooth: RFCOMM TTY layer initialized [ 6.995351] Bluetooth: RFCOMM socket layer initialized [ 6.995356] Bluetooth: RFCOMM ver 1.11 [ 7.021184] intel-hid INTC1051:00: switch event received, enable switches supports [ 7.021226] input: Intel HID switches as /devices/platform/INTC1051:00/input/input32 [ 7.801517] rfkill: input handler disabled [ 8.778848] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.778872] Bluetooth: HIDP socket layer initialized [ 8.780045] hid-generic 0005:2DC8:5111.000C: unknown main item tag 0x0 [ 8.780194] input: 8BitDo Lite SE as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/bluetooth/hci0/hci0:256/0005:2DC8:5111.000C/input/input33 [ 8.780443] hid-generic 0005:2DC8:5111.000C: input,hidraw11: BLUETOOTH HID v1.00 Gamepad [8BitDo Lite SE] on 8007FA0157AA4E52D6272A22A837382D [ 9.640293] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [ 9.641463] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [ 9.670261] wlp0s20f3: authenticated [ 9.670879] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [ 9.683793] wlp0s20f3: RX AssocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=10) [ 9.693352] wlp0s20f3: associated [ 9.783094] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [ 9.794597] hp_wmi: Unknown event_id - 20 - 0x32ff [ 10.011653] netfs: FS-Cache loaded [ 10.038049] nfs: Deprecated parameter 'intr' [ 10.114009] NFS: Registering the id_resolver key type [ 10.114018] Key type id_resolver registered [ 10.114018] Key type id_legacy registered [ 18.228019] rfkill: input handler enabled [ 19.138307] rfkill: input handler disabled [ 1792.349378] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [ 1792.380389] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [ 1792.381666] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [ 1792.411140] wlp0s20f3: authenticated [ 1792.412472] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [ 1792.417205] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=16) [ 1792.428186] wlp0s20f3: associated [ 1792.448400] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [ 1818.902828] hp_wmi: Unknown event_id - 131073 - 0x1 [ 5417.611129] wlp0s20f3: deauthenticating from AAB307495971D2236A1989F6A7AF6571 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5417.949593] PM: suspend entry (s2idle) [ 5417.952304] Filesystems sync: 0.002 seconds [ 5418.054064] Freezing user space processes [ 5418.056578] Freezing user space processes completed (elapsed 0.002 seconds) [ 5418.056585] OOM killer disabled. [ 5418.056587] Freezing remaining freezable tasks [ 5418.058057] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 5418.058062] printk: Suspending console(s) (use no_console_suspend to debug) [ 5418.795184] ACPI: EC: interrupt blocked [111781.449065] ACPI: EC: interrupt unblocked [111782.122002] OOM killer enabled. [111782.122005] Restarting tasks ... [111782.121955] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [111782.122994] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [111782.124209] done. [111782.124228] random: crng reseeded on system resumption [111782.129914] PM: suspend exit [111782.130310] thermal thermal_zone12: failed to read out thermal zone (-61) [111785.421087] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [111785.422327] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [111785.455646] wlp0s20f3: authenticated [111785.457245] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [111785.461451] wlp0s20f3: RX AssocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [111785.471091] wlp0s20f3: associated [111785.527402] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [111804.682447] hp_wmi: Unknown event_id - 131073 - 0x0 [114069.794312] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [114069.819285] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [114069.820395] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [114069.850443] wlp0s20f3: authenticated [114069.852824] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [114069.857750] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=16) [114069.868220] wlp0s20f3: associated [114069.900188] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [114102.978298] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [114103.015965] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [114103.017193] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [114103.052996] wlp0s20f3: authenticated [114103.055287] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [114103.060537] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [114103.070406] wlp0s20f3: associated [114103.129290] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [114404.662108] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [114404.689785] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [114404.690780] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [114404.824420] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 2/3) [114404.928426] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 3/3) [114405.032420] wlp0s20f3: authentication with AAB307495971D2236A1989F6A7AF6571 timed out [114405.387166] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [114405.388359] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [114405.419874] wlp0s20f3: authenticated [114405.420338] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [114405.432231] wlp0s20f3: RX AssocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [114405.443853] wlp0s20f3: associated [114405.526814] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [115673.980027] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). [115673.980038] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115674.053671] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [115674.053685] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115674.100804] wlp0s20f3: deauthenticating from 728BE298E6BDBE790D88AC73B29FCC55 by local choice (Reason: 3=DEAUTH_LEAVING) [115674.916622] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). [115674.916636] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115674.964104] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [115674.964120] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115676.223769] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). [115676.223780] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115676.303376] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [115676.303389] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [115679.604129] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [115679.605261] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [115679.634649] wlp0s20f3: authenticated [115679.635653] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [115679.640836] wlp0s20f3: RX AssocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [115679.654640] wlp0s20f3: associated [115679.654830] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [116803.708815] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [116803.731736] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [116803.732645] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [116803.763092] wlp0s20f3: authenticated [116803.764078] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [116803.768332] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=15) [116803.777904] wlp0s20f3: associated [116803.839737] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [116835.537666] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [116835.571908] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [116835.572768] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [116835.604927] wlp0s20f3: authenticated [116835.605679] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [116835.612089] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [116835.622198] wlp0s20f3: associated [116835.696805] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [119288.311518] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [119288.340334] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119288.341866] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119288.369895] wlp0s20f3: authenticated [119288.371796] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119288.379291] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [119288.387883] wlp0s20f3: associated [119288.430068] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [119345.973746] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [119346.008352] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119346.009894] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119346.038602] wlp0s20f3: authenticated [119346.039679] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119346.047142] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [119346.057900] wlp0s20f3: associated [119346.057965] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [119362.798803] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [119362.829202] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119362.830306] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119362.861715] wlp0s20f3: authenticated [119362.864077] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119362.876416] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [119362.886857] wlp0s20f3: associated [119362.977565] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [119553.705453] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [119553.739457] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119553.740530] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119553.769372] wlp0s20f3: authenticated [119553.770635] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119553.782189] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [119553.791976] wlp0s20f3: associated [119553.830784] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [119569.257659] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [119569.281432] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119569.282260] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119569.312404] wlp0s20f3: authenticated [119569.313882] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119569.316972] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [119569.327981] wlp0s20f3: associated [119569.328039] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [119695.937005] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [119695.962588] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119695.963644] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119695.997525] wlp0s20f3: authenticated [119695.998147] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [119696.004046] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [119696.013346] wlp0s20f3: associated [119696.070461] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [119711.794070] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [119711.821821] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [119711.822841] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119711.853303] wlp0s20f3: authenticated [119711.855463] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [119711.863627] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [119711.873151] wlp0s20f3: associated [119711.965390] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120054.773477] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120054.800352] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120054.801166] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120054.831935] wlp0s20f3: authenticated [120054.832531] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120054.838321] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [120054.847347] wlp0s20f3: associated [120054.897956] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120069.842902] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120069.882097] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120069.883335] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120069.914930] wlp0s20f3: authenticated [120069.916799] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120069.921862] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120069.930888] wlp0s20f3: associated [120069.964822] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120133.257154] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120133.293331] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120133.294487] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120133.327958] wlp0s20f3: authenticated [120133.328750] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120133.333291] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=5) [120133.343657] wlp0s20f3: associated [120133.343850] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120151.868837] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120151.896502] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120151.897585] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120151.929791] wlp0s20f3: authenticated [120151.932131] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120151.937639] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120151.948122] wlp0s20f3: associated [120151.989066] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120485.201618] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120485.235052] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120485.236228] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120485.269550] wlp0s20f3: authenticated [120485.270555] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120485.276497] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [120485.287008] wlp0s20f3: associated [120485.298347] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120593.810973] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120593.832293] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120593.833156] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120593.865211] wlp0s20f3: authenticated [120593.866425] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120593.870665] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120593.878098] wlp0s20f3: associated [120593.961175] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120613.013449] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120613.045471] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120613.046707] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120613.075178] wlp0s20f3: authenticated [120613.075809] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120613.080963] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [120613.090332] wlp0s20f3: associated [120613.097566] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120669.676553] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120669.701949] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120669.702987] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120669.732995] wlp0s20f3: authenticated [120669.733772] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120669.737992] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120669.747449] wlp0s20f3: associated [120669.838984] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120701.949322] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120701.980189] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120701.981246] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120702.016882] wlp0s20f3: authenticated [120702.018431] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120702.021385] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [120702.031242] wlp0s20f3: associated [120702.085418] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120843.864512] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120843.894577] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120843.895679] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120843.927424] wlp0s20f3: authenticated [120843.927819] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120843.930475] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120843.938921] wlp0s20f3: associated [120844.025703] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [120905.938071] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [120905.965126] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120905.966162] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120905.999127] wlp0s20f3: authenticated [120905.999919] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [120906.006015] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [120906.016269] wlp0s20f3: associated [120906.072645] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [120923.275957] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [120923.304503] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [120923.305756] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120923.337150] wlp0s20f3: authenticated [120923.338237] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [120923.341212] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [120923.351419] wlp0s20f3: associated [120923.387980] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121148.569308] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121148.599833] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121148.600988] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121148.634281] wlp0s20f3: authenticated [121148.635286] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121148.641410] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121148.651858] wlp0s20f3: associated [121148.665384] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121155.525178] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121155.553561] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121155.554777] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121155.685462] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 2/3) [121155.688717] wlp0s20f3: authenticated [121155.689408] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121155.693947] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121155.699956] wlp0s20f3: associated [121155.738937] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121236.251668] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121236.283661] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121236.284868] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121236.316868] wlp0s20f3: authenticated [121236.317892] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121236.324145] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121236.332824] wlp0s20f3: associated [121236.425291] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121251.679843] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121251.712275] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121251.713811] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121251.745192] wlp0s20f3: authenticated [121251.746158] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121251.749733] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121251.760012] wlp0s20f3: associated [121251.793088] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121275.200517] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121275.227680] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121275.228621] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121275.261422] wlp0s20f3: authenticated [121275.262588] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121275.269711] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121275.279802] wlp0s20f3: associated [121275.338466] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121290.574603] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121290.602578] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121290.603424] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121290.634815] wlp0s20f3: authenticated [121290.635855] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121290.640138] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121290.649331] wlp0s20f3: associated [121290.705890] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121323.877547] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121323.909906] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121323.911175] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121323.941836] wlp0s20f3: authenticated [121323.942459] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121323.954043] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121323.962486] wlp0s20f3: associated [121323.980704] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121354.462792] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121354.485781] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121354.486739] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121354.518095] wlp0s20f3: authenticated [121354.519032] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121354.524811] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121354.534693] wlp0s20f3: associated [121354.604693] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121379.484350] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121379.513143] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121379.514307] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121379.545590] wlp0s20f3: authenticated [121379.547481] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121379.552483] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121379.562005] wlp0s20f3: associated [121379.586009] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121395.631336] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121395.652020] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121395.652891] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121395.687110] wlp0s20f3: authenticated [121395.687754] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121395.692357] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121395.702506] wlp0s20f3: associated [121395.770554] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121461.194886] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121461.221001] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121461.221859] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121461.251849] wlp0s20f3: authenticated [121461.252977] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121461.256504] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121461.265561] wlp0s20f3: associated [121461.306221] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121478.396447] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121478.426395] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121478.427598] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121478.455908] wlp0s20f3: authenticated [121478.457273] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121478.460404] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121478.470032] wlp0s20f3: associated [121478.512685] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121559.675816] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121559.702875] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121559.703666] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121559.733757] wlp0s20f3: authenticated [121559.734778] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121559.739312] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121559.748105] wlp0s20f3: associated [121559.814157] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121574.725914] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121574.750137] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121574.750999] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121574.885070] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 2/3) [121574.989205] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 3/3) [121575.093204] wlp0s20f3: authentication with AAB307495971D2236A1989F6A7AF6571 timed out [121575.346038] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121575.347042] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121575.377326] wlp0s20f3: authenticated [121575.378049] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121575.385177] wlp0s20f3: RX AssocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121575.395545] wlp0s20f3: associated [121575.481865] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121608.828420] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121608.852412] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121608.853264] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121608.884643] wlp0s20f3: authenticated [121608.885663] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121608.890150] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121608.898668] wlp0s20f3: associated [121608.975487] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121641.084378] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121641.118111] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121641.119073] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121641.148750] wlp0s20f3: authenticated [121641.149248] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121641.156111] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=2) [121641.165067] wlp0s20f3: associated [121641.224744] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121655.358348] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121655.387097] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121655.388266] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121655.416511] wlp0s20f3: authenticated [121655.417512] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121655.422807] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121655.431869] wlp0s20f3: associated [121655.463501] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121688.537608] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121688.571813] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121688.572821] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121688.604767] wlp0s20f3: authenticated [121688.606221] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121688.610844] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121688.619901] wlp0s20f3: associated [121688.637372] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121737.854913] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121737.879445] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121737.880292] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121737.915265] wlp0s20f3: authenticated [121737.916014] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121737.919039] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121737.929166] wlp0s20f3: associated [121738.000046] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121770.256616] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121770.288281] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121770.289449] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121770.330799] wlp0s20f3: authenticated [121770.332707] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121770.336140] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121770.347241] wlp0s20f3: associated [121770.355425] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121886.244464] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121886.270952] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121886.271794] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121886.303153] wlp0s20f3: authenticated [121886.303744] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121886.307830] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121886.316344] wlp0s20f3: associated [121886.383983] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [121931.708453] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [121931.739322] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121931.740283] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121931.770480] wlp0s20f3: authenticated [121931.771572] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [121931.775851] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [121931.784755] wlp0s20f3: associated [121931.844135] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [121985.304158] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [121985.332417] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [121985.333581] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121985.364878] wlp0s20f3: authenticated [121985.365566] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [121985.369626] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [121985.378111] wlp0s20f3: associated [121985.404915] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122049.678741] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122049.706566] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122049.707619] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122049.742392] wlp0s20f3: authenticated [122049.743677] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122049.747880] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122049.757909] wlp0s20f3: associated [122049.812383] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122065.785004] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122065.817162] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122065.818243] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122065.846429] wlp0s20f3: authenticated [122065.846949] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122065.851054] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122065.860138] wlp0s20f3: associated [122065.893589] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122131.081783] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122131.106613] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122131.107522] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122131.137515] wlp0s20f3: authenticated [122131.138065] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122131.145001] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122131.155078] wlp0s20f3: associated [122131.222781] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122166.241397] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122166.274038] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122166.275073] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122166.306737] wlp0s20f3: authenticated [122166.307664] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122166.313026] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122166.322399] wlp0s20f3: associated [122166.350440] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122224.616754] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122224.649883] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122224.650614] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122224.685457] wlp0s20f3: authenticated [122224.686678] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122224.691431] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122224.700407] wlp0s20f3: associated [122224.717256] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122273.149296] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122273.175935] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122273.177151] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122273.208792] wlp0s20f3: authenticated [122273.209516] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122273.213017] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122273.221957] wlp0s20f3: associated [122273.258797] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122369.779093] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122369.806454] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122369.807401] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122369.840358] wlp0s20f3: authenticated [122369.841199] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122369.852695] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122369.862314] wlp0s20f3: associated [122369.923906] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122393.741459] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122393.766428] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122393.767267] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122393.798742] wlp0s20f3: authenticated [122393.799618] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122393.802040] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122393.812198] wlp0s20f3: associated [122393.888331] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122522.455951] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122522.488830] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122522.489869] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122522.522346] wlp0s20f3: authenticated [122522.522874] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122522.527336] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122522.536598] wlp0s20f3: associated [122522.606591] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122596.317048] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122596.341278] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122596.342097] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122596.373927] wlp0s20f3: authenticated [122596.376282] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122596.382250] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122596.391904] wlp0s20f3: associated [122596.441706] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122691.738831] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122691.764033] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122691.765070] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122691.797470] wlp0s20f3: authenticated [122691.798896] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122691.805607] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122691.815401] wlp0s20f3: associated [122691.878714] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122744.884611] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122744.909300] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122744.910332] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122744.941521] wlp0s20f3: authenticated [122744.943849] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122744.948070] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122744.959018] wlp0s20f3: associated [122745.026872] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122790.038180] wlp0s20f3: deauthenticated from AAB307495971D2236A1989F6A7AF6571 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [122790.095462] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122790.096295] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122790.123742] wlp0s20f3: authenticated [122790.124692] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122790.128987] wlp0s20f3: RX AssocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122790.140312] wlp0s20f3: associated [122790.186733] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122804.312611] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122804.353102] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122804.354151] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122804.383099] wlp0s20f3: authenticated [122804.383888] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122804.389685] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122804.399171] wlp0s20f3: associated [122804.419341] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122875.446057] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122875.471774] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122875.472775] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122875.503136] wlp0s20f3: authenticated [122875.504203] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122875.508497] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122875.518490] wlp0s20f3: associated [122875.590027] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122939.961359] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122939.987721] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122939.988596] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122940.019896] wlp0s20f3: authenticated [122940.020320] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122940.024101] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122940.033643] wlp0s20f3: associated [122940.103279] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [122954.396310] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [122954.421524] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122954.422488] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122954.451625] wlp0s20f3: authenticated [122954.452599] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [122954.456689] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [122954.464449] wlp0s20f3: associated [122954.542350] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [122986.653016] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [122986.680780] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [122986.681692] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122986.715906] wlp0s20f3: authenticated [122986.717176] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [122986.721807] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [122986.731739] wlp0s20f3: associated [122986.799045] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123015.526584] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123015.554605] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123015.555567] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123015.587809] wlp0s20f3: authenticated [123015.588692] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123015.592811] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123015.602804] wlp0s20f3: associated [123015.676605] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123047.879164] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [123047.908448] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123047.909679] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123047.940683] wlp0s20f3: authenticated [123047.942254] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123047.946599] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123047.954879] wlp0s20f3: associated [123048.036040] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123062.983781] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123063.016418] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123063.017557] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123063.049031] wlp0s20f3: authenticated [123063.049535] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123063.053820] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123063.061836] wlp0s20f3: associated [123063.089242] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123077.217750] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [123077.250594] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123077.251714] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123077.285107] wlp0s20f3: authenticated [123077.285812] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123077.293483] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123077.302798] wlp0s20f3: associated [123077.426993] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123101.701795] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123101.732575] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123101.733790] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123101.765397] wlp0s20f3: authenticated [123101.767249] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123101.772232] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123101.782159] wlp0s20f3: associated [123101.802567] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123134.973006] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [123135.004631] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123135.005781] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123135.036679] wlp0s20f3: authenticated [123135.037928] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123135.045494] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123135.055946] wlp0s20f3: associated [123135.079646] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123181.562471] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123181.597908] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123181.598978] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123181.630406] wlp0s20f3: authenticated [123181.632813] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123181.636150] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123181.644963] wlp0s20f3: associated [123181.671344] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123260.314110] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [123260.349610] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123260.350837] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123260.385374] wlp0s20f3: authenticated [123260.386115] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123260.389856] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123260.399513] wlp0s20f3: associated [123260.419588] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123380.805156] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123380.833783] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123380.834743] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123380.865052] wlp0s20f3: authenticated [123380.866284] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123380.869907] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123380.878441] wlp0s20f3: associated [123380.946425] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123387.288059] hp_wmi: Unknown event_id - 20 - 0x32fe [123414.081188] wlp0s20f3: deauthenticated from AAB307495971D2236A1989F6A7AF6571 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [123414.103136] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123414.104414] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123414.138618] wlp0s20f3: authenticated [123414.139875] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123414.153885] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123414.163796] wlp0s20f3: associated [123414.228937] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123445.014201] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123445.038028] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123445.038998] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123445.068095] wlp0s20f3: authenticated [123445.069439] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123445.075556] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123445.085869] wlp0s20f3: associated [123445.152847] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123638.470821] wlp0s20f3: disconnect from AP AAB307495971D2236A1989F6A7AF6571 for new auth to 728BE298E6BDBE790D88AC73B29FCC55 [123638.492919] wlp0s20f3: authenticate with 728BE298E6BDBE790D88AC73B29FCC55 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123638.493753] wlp0s20f3: send auth to 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123638.522519] wlp0s20f3: authenticated [123638.524022] wlp0s20f3: associate with 728BE298E6BDBE790D88AC73B29FCC55 (try 1/3) [123638.536841] wlp0s20f3: RX ReassocResp from 728BE298E6BDBE790D88AC73B29FCC55 (capab=0x1511 status=0 aid=6) [123638.545420] wlp0s20f3: associated [123638.594805] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 728BE298E6BDBE790D88AC73B29FCC55 [123668.655317] wlp0s20f3: disconnect from AP 728BE298E6BDBE790D88AC73B29FCC55 for new auth to AAB307495971D2236A1989F6A7AF6571 [123668.682085] wlp0s20f3: authenticate with AAB307495971D2236A1989F6A7AF6571 (local address=7E00C3EBF5F13F7B085C6721E40C5874) [123668.683413] wlp0s20f3: send auth to AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123668.713273] wlp0s20f3: authenticated [123668.715507] wlp0s20f3: associate with AAB307495971D2236A1989F6A7AF6571 (try 1/3) [123668.720746] wlp0s20f3: RX ReassocResp from AAB307495971D2236A1989F6A7AF6571 (capab=0x1111 status=0 aid=10) [123668.728823] wlp0s20f3: associated [123668.800021] wlp0s20f3: Limiting TX power to 36 (36 - 0) dBm as advertised by AAB307495971D2236A1989F6A7AF6571 [123720.508297] rfkill: input handler enabled [123721.194685] wlp0s20f3: deauthenticating from AAB307495971D2236A1989F6A7AF6571 by local choice (Reason: 3=DEAUTH_LEAVING) [123721.651526] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230628/psargs-330) [123721.651546] [123721.651549] No Local Variables are initialized for Method [_OSC] [123721.651553] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [123721.651555] Arg0: 00000000402845d3 <Obj> Buffer(16) 5D A8 3B B2 B7 C8 42 35 [123721.651575] Arg1: 00000000c63fe983 <Obj> Integer 0000000000000001 [123721.651584] Arg2: 0000000081466286 <Obj> Integer 0000000000000002 [123721.651591] Arg3: 0000000032224162 <Obj> Buffer(8) 00 00 00 00 00 00 00 00 [123721.651607] [123721.651610] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529)