-- Logs begin at Mon 2022-05-30 06:14:53 CEST, end at Sun 2023-09-03 21:28:27 CEST. -- [ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 4.18.16-desktop-1bP (XXX@XXX) (gcc version 8.2.1 20180824 (blackPanther 8.2.1-0.20180824.1bP)) #1 SMP Tue Oct 23 22:47:49 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.16-desktop-1bP root=UUID=HASH_68C-182A-402C-4045-0AC43D0A1D3A ro quiet splash resume=UUID=HASH_323-D770-E1FF-0796-CC1D622E8A14 loglevel=0 vga=791 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b96bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b96c000-0x000000007b9befff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b9bf000-0x000000007ba81fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ba82000-0x000000007babefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007babf000-0x000000007baebfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007baec000-0x000000007bafefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007baff000-0x000000007bafffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bb00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: eMachines eMachines E725 /eMachines E725 , BIOS V1.06 07/11/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask FFFF00000 write-protect [ 0.000000] 1 base 0FFFC0000 mask FFFFE0000 uncachable [ 0.000000] 2 base 000000000 mask FC0000000 write-back [ 0.000000] 3 base 040000000 mask FC0000000 write-back [ 0.000000] 4 base 07C000000 mask FFC000000 uncachable [ 0.000000] 5 base 07BC00000 mask FFFC00000 uncachable [ 0.000000] 6 base 07BB00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] BRK [0x138e2000, 0x138e2fff] PGTABLE [ 0.000000] BRK [0x138e3000, 0x138e3fff] PGTABLE [ 0.000000] BRK [0x138e4000, 0x138e4fff] PGTABLE [ 0.000000] BRK [0x138e5000, 0x138e5fff] PGTABLE [ 0.000000] BRK [0x138e6000, 0x138e6fff] PGTABLE [ 0.000000] BRK [0x138e7000, 0x138e7fff] PGTABLE [ 0.000000] BRK [0x138e8000, 0x138e8fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36638000-0x37313fff] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x000000007BAFE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000007BAFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 0x000000007BAEE000 00937D (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 0x000000007BA8F000 000040 [ 0.000000] ACPI: FACS 0x000000007BA8F000 000040 [ 0.000000] ACPI: HPET 0x000000007BAFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 0x000000007BAFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 0x000000007BAFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: ASF! 0x000000007BAF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: NSLI 0x000000007BAF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 0x000000007BAED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 0x000000007BAEC000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bafffff] NODE_DATA(0) allocated [mem 0x7bae8000-0x7baebfff] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x000000007bafffff] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x000000007b96bfff] node 0: [mem 0x000000007b9bf000-0x000000007ba81fff] node 0: [mem 0x000000007babf000-0x000000007baebfff] node 0: [mem 0x000000007baff000-0x000000007bafffff] Reserved but unavailable: 17926 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bafffff] On node 0 totalpages: 506362 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7852 pages used for memmap [ 0.000000] DMA32 zone: 502365 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: Registered nosave memory: [mem 0x7b96c000-0x7b9befff] PM: Registered nosave memory: [mem 0x7ba82000-0x7babefff] PM: Registered nosave memory: [mem 0x7baec000-0x7bafefff] [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x51a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s145816 r8192 d30312 u524288 [ 0.000000] pcpu-alloc: s145816 r8192 d30312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 498425 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.16-desktop-1bP root=UUID=HASH_68C-182A-402C-4045-0AC43D0A1D3A ro quiet splash resume=UUID=HASH_323-D770-E1FF-0796-CC1D622E8A14 loglevel=0 vga=791 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1953112K/2025448K available (12300K kernel code, 1346K rwdata, 3672K rodata, 1568K init, 656K bss, 72336K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 34488 entries in 135 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 2094.680 MHz processor [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e318ef40d0, max_idle_ns: 440795258949 ns [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.36 BogoMIPS (lpj=2094680) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] TOMOYO Linux initialized [ 0.008049] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008650] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008688] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.008708] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.009038] mce: CPU supports 6 MCE banks [ 0.009046] CPU0: Thermal monitoring enabled (TM1) [ 0.009049] process: using mwait in idle threads [ 0.009054] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.009055] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.009059] Spectre V2 : Mitigation: Full generic retpoline [ 0.009060] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.009061] Speculative Store Bypass: Vulnerable [ 0.009225] Freeing SMP alternatives memory: 32K [ 0.012000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.012000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.012000] ... version: 2 [ 0.012000] ... bit width: 40 [ 0.012000] ... generic registers: 2 [ 0.012000] ... value mask: 000000ffffffffff [ 0.012000] ... max period: 000000007fffffff [ 0.012000] ... fixed-purpose events: 3 [ 0.012000] ... event mask: 0000000700000003 [ 0.012000] Hierarchical SRCU implementation. [ 0.012139] smp: Bringing up secondary CPUs ... [ 0.012306] x86: Booting SMP configuration: [ 0.012308] .... node #0, CPUs: #1 [ 0.014045] smp: Brought up 1 node, 2 CPUs [ 0.014045] smpboot: Max logical packages: 2 [ 0.014045] smpboot: Total of 2 processors activated (8378.72 BogoMIPS) [ 0.015228] devtmpfs: initialized [ 0.015228] x86/mm: Memory block size: 128MB [ 0.016005] PM: Registering ACPI NVS region [mem 0x7ba82000-0x7babefff] (249856 bytes) [ 0.016024] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.016024] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.016104] xor: measuring software checksum speed [ 0.026002] prefetch64-sse: 11936.000 MB/sec [ 0.036001] generic_sse: 10116.000 MB/sec [ 0.036003] xor: using function: prefetch64-sse (11936.000 MB/sec) [ 0.036006] pinctrl core: initialized pinctrl subsystem [ 0.036149] RTC time: 4:58:01, date: 09/03/23 [ 0.036331] NET: Registered protocol family 16 [ 0.036484] cpuidle: using governor ladder [ 0.036484] cpuidle: using governor menu [ 0.036484] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.036484] Simple Boot Flag at 0x44 set to 0x1 [ 0.036484] ACPI: bus type PCI registered [ 0.036484] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.037018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.037030] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.037030] PCI: Using configuration type 1 for base access [ 0.037131] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.037132] mtrr: probably your BIOS does not setup all CPUs. [ 0.037133] mtrr: corrected configuration. [ 0.038466] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.055015] raid6: sse2x1 gen() 3175 MB/s [ 0.072005] raid6: sse2x1 xor() 3603 MB/s [ 0.089005] raid6: sse2x2 gen() 3492 MB/s [ 0.106005] raid6: sse2x2 xor() 4468 MB/s [ 0.123007] raid6: sse2x4 gen() 6511 MB/s [ 0.140006] raid6: sse2x4 xor() 4244 MB/s [ 0.140008] raid6: using algorithm sse2x4 gen() 6511 MB/s [ 0.140009] raid6: .... xor() 4244 MB/s, rmw enabled [ 0.140010] raid6: using ssse3x2 recovery algorithm [ 0.140129] ACPI: Added _OSI(Module Device) [ 0.140131] ACPI: Added _OSI(Processor Device) [ 0.140132] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.140133] ACPI: Added _OSI(Processor Aggregator Device) [ 0.140135] ACPI: Added _OSI(Linux-Dell-Video) [ 0.146217] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.149192] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.149562] ACPI: Dynamic OEM Table Load: [ 0.149569] ACPI: SSDT 0xFFFF991A78A01C00 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.149907] ACPI: Dynamic OEM Table Load: [ 0.149913] ACPI: SSDT 0xFFFF991A78A2C000 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.150477] ACPI: Dynamic OEM Table Load: [ 0.150483] ACPI: SSDT 0xFFFF991A78A24C00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.150748] ACPI: Dynamic OEM Table Load: [ 0.150753] ACPI: SSDT 0xFFFF991A789C5300 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.151233] ACPI: EC: EC started [ 0.151234] ACPI: EC: interrupt blocked [ 0.158072] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC [ 0.158074] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.158076] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions [ 0.158077] ACPI: Interpreter enabled [ 0.158110] ACPI: (supports S0 S3 S4 S5) [ 0.158111] ACPI: Using IOAPIC for interrupt routing [ 0.158150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158398] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.165981] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.165989] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.166017] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.166455] PCI host bridge to bus 0000:00 [ 0.166458] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.166511] DMAR: Forcing write-buffer flush capability [ 0.166512] DMAR: Disabling IOMMU for graphics on this chipset [ 0.166620] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.166635] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x50f0-0x50f7] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.166782] pci 0000:00:02.1: reg 0x10: [mem 0x93400000-0x934fffff 64bit] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.167032] pci 0000:00:1a.0: reg 0x20: [io 0x50c0-0x50df] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.168824] pci 0000:00:1a.7: reg 0x10: [mem 0x96704c00-0x96704fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.173580] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.173610] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.174171] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.174287] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.174408] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.174524] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.174649] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.174760] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.174892] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.174977] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.175237] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.175489] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.175741] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.177404] pci 0000:00:1d.7: reg 0x10: [mem 0x96704800-0x96704bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.182579] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.182747] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.183076] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.183102] pci 0000:00:1f.2: reg 0x10: [io 0x50e8-0x50ef] pci 0000:00:1f.2: reg 0x14: [io 0x50fc-0x50ff] pci 0000:00:1f.2: reg 0x18: [io 0x50e0-0x50e7] pci 0000:00:1f.2: reg 0x1c: [io 0x50f8-0x50fb] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] pci 0000:00:1f.2: reg 0x24: [mem 0x96704000-0x967047ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.183321] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.183348] pci 0000:00:1f.3: reg 0x10: [mem 0x96705000-0x967050ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] acpiphp: Slot [1] registered [ 0.183590] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000 [ 0.183746] pci 0000:04:00.0: reg 0x10: [mem 0x94600000-0x9460ffff 64bit] pci 0000:04:00.0: supports D1 [ 0.183948] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.184113] pci 0000:00:1c.1: PCI bridge to [bus 04] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] pci 0000:05:00.0: [1969:1062] type 00 class 0x020000 [ 0.184255] pci 0000:05:00.0: reg 0x10: [mem 0x93500000-0x9353ffff 64bit] pci 0000:05:00.0: reg 0x18: [io 0x1000-0x107f] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184543] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref] pci_bus 0000:06: extended config space not accessible [ 0.184653] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.184665] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.184667] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.184669] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.184671] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.288240] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288391] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.288537] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.288610] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.288683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288756] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.289494] ACPI: EC: interrupt unblocked [ 0.289517] ACPI: EC: event unblocked [ 0.289527] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.289530] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.289647] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.289647] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.289647] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.289647] vgaarb: loaded [ 0.289647] SCSI subsystem initialized [ 0.290021] libata version 3.00 loaded. [ 0.290100] EDAC MC: Ver: 3.0.0 [ 0.290142] PCI: Using ACPI for IRQ routing [ 0.292621] PCI: pci_cache_line_size set to 64 bytes [ 0.292701] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x7b96c000-0x7bffffff] e820: reserve RAM buffer [mem 0x7ba82000-0x7bffffff] e820: reserve RAM buffer [mem 0x7baec000-0x7bffffff] e820: reserve RAM buffer [mem 0x7bb00000-0x7bffffff] NetLabel: Initializing [ 0.292859] NetLabel: domain hash size = 128 [ 0.292860] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.292883] NetLabel: unlabeled traffic allowed by default [ 0.293031] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.293037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.293042] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.295027] clocksource: Switched to clocksource tsc-early [ 0.317888] VFS: Disk quotas dquot_6.6.0 [ 0.317921] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.318060] pnp: PnP ACPI init [ 0.424110] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.424192] system 00:00: [io 0x0610] has been reserved [ 0.424194] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.424196] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.424199] system 00:00: [io 0x0820-0x0823] has been reserved [ 0.424201] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.424203] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.424206] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.424209] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.424212] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.424214] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.424217] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.424219] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.424222] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.424224] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.424226] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.424235] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.424308] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.424395] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.424488] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1d SYN1b00 SYN0002 PNP0f13 (active) [ 0.424659] pnp: PnP ACPI: found 4 devices [ 0.431024] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.431077] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 04] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0x95700000-0x966fffff] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0x94600000-0x956fffff] pci_bus 0000:04: resource 2 [mem 0x91400000-0x923fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] pci_bus 0000:05: resource 1 [mem 0x93500000-0x945fffff] pci_bus 0000:05: resource 2 [mem 0x92400000-0x933fffff 64bit pref] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:06: resource 7 [mem 0x80000000-0xfebfffff window] NET: Registered protocol family 2 [ 0.431552] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.431571] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.431645] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.431754] TCP: Hash tables configured (established 16384 bind 16384) [ 0.431828] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.431849] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.431951] NET: Registered protocol family 1 [ 0.431960] NET: Registered protocol family 44 [ 0.431980] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6c3 took 12351 usecs [ 0.459056] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c3 took 12438 usecs [ 0.459084] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.459089] PCI: CLS 64 bytes, default 64 [ 0.459156] Trying to unpack rootfs image as initramfs... [ 0.678968] Freeing initrd memory: 13168K [ 0.679917] Initialise system trusted keyrings [ 0.680018] workingset: timestamp_bits=56 max_order=19 bucket_order=0 [ 0.682698] zbud: loaded [ 0.683755] pstore: using deflate compression [ 0.684830] Key type asymmetric registered [ 0.684832] Asymmetric key parser 'x509' registered [ 0.684895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.684956] io scheduler noop registered [ 0.684957] io scheduler deadline registered [ 0.685016] io scheduler cfq registered (default) [ 0.685017] io scheduler mq-deadline registered [ 0.685018] io scheduler kyber registered [ 0.685069] io scheduler bfq registered [ 0.685361] pcieport 0000:00:1c.0: enabling device (0001 -> 0003) [ 0.686208] vesafb: mode is 1024x768x16, linelength=2048, pages=41 [ 0.686209] vesafb: scrolling: redraw [ 0.686211] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.686229] vesafb: framebuffer at 0x80000000, mapped to 0x(____ptrval____), using 3072k, total 65472k [ 0.698392] Console: switching to colour frame buffer device 128x48 [ 0.710397] fb0: VESA VGA frame buffer device [ 0.710420] intel_idle: does not run on family 6 model 23 [ 0.710539] Monitor-Mwait will be used to enter C-1 state [ 0.710547] Monitor-Mwait will be used to enter C-2 state [ 0.710552] tsc: Marking TSC unstable due to TSC halts in idle [ 0.710645] clocksource: Switched to clocksource hpet [ 0.711080] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.711699] Linux agpgart interface v0.103 [ 0.714764] brd: module loaded [ 0.715337] ahci 0000:00:1f.2: version 3.0 [ 0.715689] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.715731] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.715735] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs [ 0.726752] scsi host0: ahci [ 0.726976] scsi host1: ahci [ 0.727136] scsi host2: ahci [ 0.727261] scsi host3: ahci [ 0.727386] scsi host4: ahci [ 0.727517] scsi host5: ahci [ 0.727565] ata1: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704100 irq 24 [ 0.727568] ata2: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704180 irq 24 [ 0.727569] ata3: DUMMY [ 0.727570] ata4: DUMMY [ 0.727573] ata5: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704300 irq 24 [ 0.727575] ata6: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704380 irq 24 [ 0.727750] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 0.753822] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.753829] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.754035] mousedev: PS/2 mouse device common for all mice [ 0.754576] rtc_cmos 00:01: RTC can wake from S4 [ 0.754765] rtc_cmos 00:01: registered as rtc0 [ 0.754787] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.754834] ledtrig-cpu: registered to indicate activity on CPUs [ 0.755096] Key type dns_resolver registered [ 0.755097] mpls_gso: MPLS GSO support [ 0.755304] microcode: sig=0x1067a, pf=0x80, revision=0xa0b [ 0.755369] microcode: Microcode Update Driver: v2.2. [ 0.755555] registered taskstats version 1 [ 0.755556] Loading compiled-in X.509 certificates [ 0.755610] zswap: loaded using pool lzo/zbud [ 0.756292] Btrfs loaded, crc32c=crc32c-generic [ 0.759625] Key type encrypted registered [ 0.760140] Magic number: 7:108:969 [ 0.760309] rtc_cmos 00:01: setting system clock to 2023-09-03 04:58:01 UTC (1693717081) [ 0.760401] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 0.782910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.201077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.256657] ata1.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 1.256659] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.258740] ata1.00: configured for UDMA/133 [ 1.258983] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 1A11 PQ: 0 ANSI: 5 [ 1.259328] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.259361] sd 0:0:0:0: [sda] Write Protect is off [ 1.259364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.259421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.298745] sda: sda1 sda2 [ 1.299315] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.551635] random: fast init done [ 1.729076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.730878] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100 [ 1.733566] ata2.00: configured for UDMA/100 [ 1.739498] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5 [ 2.061989] ata5: SATA link down (SStatus 0 SControl 300) [ 2.374965] ata6: SATA link down (SStatus 0 SControl 300) [ 2.375013] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 2.377830] Freeing unused kernel image memory: 1568K [ 2.382071] Write protecting the kernel read-only data: 18432k [ 2.383494] Freeing unused kernel image memory: 2016K [ 2.383849] Freeing unused kernel image memory: 424K [ 2.479430] laci-pc dracut: dracut-046 [ 2.972408] pci 0000:00:00.0: Intel GM45 Chipset [ 2.972433] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.972732] pci 0000:00:00.0: detected 65536K stolen memory [ 2.972768] checking generic (80000000 3ff0000) vs hw (80000000 10000000) [ 2.972770] fb: switching to inteldrmfb from VESA VGA [ 2.972809] Console: switching to colour dummy device 80x25 [ 2.973470] [drm] Replacing VGA console driver [ 2.974081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.974082] [drm] Driver supports precise vblank timestamp query. [ 2.974735] [drm] applying inverted panel brightness quirk [ 2.974795] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.995675] [drm] RC6 disabled, disabling runtime PM support [ 2.996602] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 2.997374] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 3.312095] acpi device:06: registered as cooling_device2 [ 3.312186] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2 [ 3.323197] fbcon: inteldrmfb (fb0) is primary device [ 3.978156] Console: switching to colour frame buffer device 170x48 [ 3.996942] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.013480] laci-pc dracut: Starting plymouth daemon [ 4.327634] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.327639] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.327882] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.360534] ACPI: bus type USB registered [ 4.360567] usbcore: registered new interface driver usbfs [ 4.360579] usbcore: registered new interface driver hub [ 4.362086] usbcore: registered new device driver usb [ 4.387267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.388138] ehci-pci: EHCI PCI platform driver [ 4.388439] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 4.388449] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.388466] ehci-pci 0000:00:1a.7: debug port 1 [ 4.392391] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 4.400224] ehci-pci 0000:00:1a.7: irq 21, io mem 0x96704c00 [ 4.407080] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.407155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.407157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.407159] usb usb1: Product: EHCI Host Controller [ 4.407161] usb usb1: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 4.407163] usb usb1: SerialNumber: ... [ 4.407350] hub 1-0:1.0: USB hub found [ 4.407366] hub 1-0:1.0: 2 ports detected [ 4.407807] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.407817] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.407833] ehci-pci 0000:00:1d.7: debug port 1 [ 4.411737] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 4.412282] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96704800 [ 4.419042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.419115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.419117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.419119] usb usb2: Product: EHCI Host Controller [ 4.419121] usb usb2: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 4.419123] usb usb2: SerialNumber: ... [ 4.419308] hub 2-0:1.0: USB hub found [ 4.419317] hub 2-0:1.0: 8 ports detected [ 4.425231] uhci_hcd: USB Universal Host Controller Interface driver [ 4.425566] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.425575] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.425585] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.425626] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0 [ 4.425703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.425705] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.425708] usb usb3: Product: UHCI Host Controller [ 4.425709] usb usb3: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.425711] usb usb3: SerialNumber: ... [ 4.427152] hub 3-0:1.0: USB hub found [ 4.427162] hub 3-0:1.0: 2 ports detected [ 4.427572] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.427582] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.427592] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.427619] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 4.427690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.427693] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.427695] usb usb4: Product: UHCI Host Controller [ 4.427696] usb usb4: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.427698] usb usb4: SerialNumber: ... [ 4.429122] hub 4-0:1.0: USB hub found [ 4.429132] hub 4-0:1.0: 2 ports detected [ 4.429559] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.429568] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 4.429578] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.429630] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080 [ 4.429706] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.429708] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.429711] usb usb5: Product: UHCI Host Controller [ 4.429713] usb usb5: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.429715] usb usb5: SerialNumber: ... [ 4.431902] hub 5-0:1.0: USB hub found [ 4.431917] hub 5-0:1.0: 2 ports detected [ 4.432372] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.432384] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 4.432394] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.432433] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060 [ 4.432521] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.432523] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.432526] usb usb6: Product: UHCI Host Controller [ 4.432528] usb usb6: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.432530] usb usb6: SerialNumber: ... [ 4.432780] hub 6-0:1.0: USB hub found [ 4.432795] hub 6-0:1.0: 2 ports detected [ 4.433288] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.433302] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 4.433313] uhci_hcd 0000:00:1d.3: detected 2 ports [ 4.433365] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040 [ 4.433454] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.433457] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.433459] usb usb7: Product: UHCI Host Controller [ 4.433461] usb usb7: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.433462] usb usb7: SerialNumber: ... [ 4.441776] hub 7-0:1.0: USB hub found [ 4.441794] hub 7-0:1.0: 2 ports detected [ 4.779662] PM: Image not found (code -22) [ 4.864417] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.930040] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 5.014127] laci-pc dracut: Checking ext4: /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A [ 5.014368] laci-pc dracut: issuing e2fsck -a /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A [ 5.022749] random: crng init done [ 5.081721] laci-pc dracut: /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A: clean, 462467/15020640 files, 7471353/59965440 blocks [ 5.085133] laci-pc dracut: Mounting /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A with -o rw,noatime,ro [ 5.107108] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 5.107112] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 5.107114] usb 4-1: Product: CSR8510 A10 [ 5.197823] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.375407] laci-pc dracut: Mounted root filesystem /dev/sda1 [ 5.635023] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 5.802234] usb 2-4: New USB device found, idVendor=04f2, idProduct=b044, bcdDevice=11.12 [ 5.802237] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 5.802239] usb 2-4: Product: CNF7017 [ 5.802241] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 5.802243] usb 2-4: SerialNumber: ... [ 5.805254] laci-pc dracut: Switching root [ 5.809237] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 7.120094] NET: Registered protocol family 10 [ 7.120519] Segment Routing with IPv6 [ 12.546805] vboxsf: err -19 connecting to guest PCI-device [ 12.546870] vboxsf: make sure you are inside a VirtualBox VM [ 12.546928] vboxsf: and check dmesg for vboxguest errors [ 12.594939] EXT4-fs (sda1): re-mounted. Opts: (null) [ 16.628055] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input3 [ 16.628071] ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input4 [ 16.628167] ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input5 [ 16.628238] ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 16.628368] ACPI: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 16.836157] ACPI: Thermal Zone [TZ01] (41 C) [ 17.024466] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found [ 17.383886] ACPI: AC Adapter [AC] (on-line) [ 17.519611] atl1c 0000:05:00.0: version XXX.XXX.XXX.XXX-NAPI [ 17.721073] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.725553] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.961434] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 17.961438] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 17.961440] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 17.961442] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.961444] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.961446] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 17.970627] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 17.970887] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 17.970961] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 18.251575] ath: phy0: Enable LNA combining [ 18.254205] ath: phy0: ASPM enabled: 0x43 [ 18.254208] ath: EEPROM regdomain: 0x65 [ 18.254209] ath: EEPROM indicates we should expect a direct regpair map [ 18.254212] ath: Country alpha2 being used: 00 [ 18.254213] ath: Regpair used: 0x65 [ 18.490268] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 18.490846] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbbccc0890000, irq=17 [ 18.789002] wl: loading out-of-tree module taints kernel. [ 18.789041] wl: module license 'MIXED/Proprietary' taints kernel. [ 18.789042] Disabling lock debugging due to kernel taint [ 22.224103] ACPI: Battery Slot [BAT0] (battery absent) [ 23.368820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 23.676442] Bluetooth: Core ver 2.22 [ 23.676520] NET: Registered protocol family 31 [ 23.676521] Bluetooth: HCI device and connection manager initialized [ 23.678710] Bluetooth: HCI socket layer initialized [ 23.678714] Bluetooth: L2CAP socket layer initialized [ 23.678731] Bluetooth: SCO socket layer initialized [ 23.733320] usbcore: registered new interface driver btusb [ 24.514604] media: Linux media interface: v0.10 [ 24.640183] videodev: Linux video capture interface: v2.00 [ 24.827132] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044) [ 24.899537] intel_powerclamp: No package C-state available [ 24.912302] uvcvideo 2-4:1.0: Entity type for entity Extension 5 was not initialized! [ 24.912306] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized! [ 24.912309] uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized! [ 24.912311] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized! [ 24.912360] intel_powerclamp: No package C-state available [ 24.912416] input: CNF7017: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11 [ 24.912531] usbcore: registered new interface driver uvcvideo [ 24.912532] USB Video Class driver (1.1.1) [ 24.948652] Adding 4334700k swap on /dev/sda2. Priority:-2 extents:1 across:4334700k FS [ 25.787204] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000/0x0, board id: 0, fw id: 502560 [ 25.952511] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 26.995761] acer_wmi: Acer Laptop ACPI-WMI Extras [ 26.996860] acer_wmi: Function bitmap for Communication Device: 0x1 [ 27.417372] vboxsf: err -19 connecting to guest PCI-device [ 27.417452] vboxsf: make sure you are inside a VirtualBox VM [ 27.417524] vboxsf: and check dmesg for vboxguest errors [ 27.758194] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 27.767775] iTCO_vendor_support: vendor-support=0 [ 27.769376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 27.769449] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 27.770429] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 27.838237] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 27.844253] atl1c 0000:05:00.0 enp5s0: renamed from eth0 [ 28.239119] vboxsf: err -19 connecting to guest PCI-device [ 28.239198] vboxsf: make sure you are inside a VirtualBox VM [ 28.239271] vboxsf: and check dmesg for vboxguest errors [ 28.787110] device-mapper: uevent: version 1.0.3 [ 28.787266] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 32.504104] CAPI 2.0 started up with major 68 (middleware) [ 36.157907] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.157910] Bluetooth: BNEP filters: protocol multicast [ 36.157916] Bluetooth: BNEP socket layer initialized [ 36.611498] NET: Registered protocol family 38 [ 41.134732] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 41.148711] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 41.161237] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 41.176685] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 41.199901] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 42.981451] NET: Registered protocol family 17 [ 43.480771] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 46.439829] loop: module loaded [ 46.774514] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 52.982924] Initializing XFRM netlink socket [ 54.182279] cryptd: max_cpu_qlen set to 1000 [ 55.878546] AVX or AES-NI instructions are not detected. [ 55.890699] AVX or AES-NI instructions are not detected. [ 58.474524] IPv4 over IPsec tunneling driver [ 61.709488] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 61.735220] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 61.763298] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 69.995048] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 70.003594] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 70.027951] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 75.557365] Bluetooth: RFCOMM TTY layer initialized [ 75.557375] Bluetooth: RFCOMM socket layer initialized [ 75.557387] Bluetooth: RFCOMM ver 1.11 [ 115.293969] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 164.681384] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 164.700780] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 164.702720] wlp4s0: authenticated [ 164.703326] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 164.724113] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [ 164.724270] wlp4s0: associated [ 164.743646] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 180.392730] fuse init (API version 7.27) [ 3964.822590] pci 0000:00:1e.0: PCI bridge to [bus 06] pci_bus 0000:06: Allocating resources [ 3964.822719] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 3964.822722] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 3964.822725] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 3964.822737] pci 0000:00:1e.0: BAR 14: assigned [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: BAR 15: assigned [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [ 3964.930000] pci_bus 0000:04: Allocating resources [ 3964.930050] pci_bus 0000:05: Allocating resources [ 3964.930077] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] PM: suspend entry (deep) [ 3971.712685] PM: Syncing filesystems ... [ 3975.061864] done. [ 3975.132738] Freezing user space processes ... (elapsed 0.113 seconds) done. [ 3975.246524] OOM killer disabled. [ 3975.246525] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3975.247973] Suspending console(s) (use no_console_suspend to debug) [ 3975.248396] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 3975.257128] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3975.364764] sd 0:0:0:0: [sda] Stopping disk [ 3975.702475] ACPI: EC: interrupt blocked [ 3975.715246] ACPI: Preparing to enter system sleep state S3 [ 3975.715383] ACPI: EC: event blocked [ 3975.715383] ACPI: EC: EC stopped [ 3975.715384] PM: Saving platform NVS memory [ 3975.715678] Disabling non-boot CPUs ... [ 3975.722506] smpboot: CPU 1 is now offline [ 3975.723130] ACPI: Low-level resume complete [ 3975.723130] ACPI: EC: EC started [ 3975.723130] PM: Restoring platform NVS memory [ 3975.729409] Enabling non-boot CPUs ... [ 3975.729464] x86: Booting SMP configuration: [ 3975.729466] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3976.079124] cache: parent cpu1 should not be sleeping [ 3976.190063] CPU1 is up [ 3976.191670] ACPI: Waking up from system sleep state S3 [ 3976.194675] ACPI: EC: interrupt unblocked [ 3976.208665] usb usb3: root hub lost power or was reset [ 3976.208693] usb usb4: root hub lost power or was reset [ 3976.208728] usb usb5: root hub lost power or was reset [ 3976.208749] usb usb6: root hub lost power or was reset [ 3976.208789] usb usb7: root hub lost power or was reset [ 3976.209882] ath: phy0: ASPM enabled: 0x43 [ 3976.211777] sd 0:0:0:0: [sda] Starting disk [ 3976.214117] ACPI: button: The lid device is not compliant to SW_LID. [ 3976.312791] ACPI: EC: event unblocked [ 3976.452071] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 3976.533761] ata5: SATA link down (SStatus 0 SControl 300) [ 3976.533793] ata6: SATA link down (SStatus 0 SControl 300) [ 3976.546066] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [ 3976.688055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3976.695579] ata2.00: configured for UDMA/100 [ 3977.401640] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3979.373198] ata1.00: configured for UDMA/133 [ 3979.395480] OOM killer enabled. [ 3979.395482] Restarting tasks ... done. [ 3979.403082] video LNXVIDEO:01: Restoring backlight state [ 3979.404054] PM: suspend exit [ 3981.841179] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 3981.853836] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 3982.224074] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 3983.025830] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 3985.396114] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 3987.976296] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 3987.996873] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3988.000750] wlp4s0: authenticated [ 3988.006082] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3988.029586] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [ 3988.029745] wlp4s0: associated [ 3988.067468] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 6156.466678] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [ 6156.466815] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [ 6156.577062] pci_bus 0000:04: Allocating resources [ 6156.577093] pci_bus 0000:05: Allocating resources [ 6156.577116] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6164.057465] PM: suspend entry (deep) [ 6164.057469] PM: Syncing filesystems ... [ 6164.333055] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6165.999368] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6166.044639] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6172.898890] done. [ 6173.273780] Freezing user space processes ... (elapsed 0.144 seconds) done. [ 6173.418178] OOM killer disabled. [ 6173.418179] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6173.419257] Suspending console(s) (use no_console_suspend to debug) [ 6173.435151] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6173.435371] sd 0:0:0:0: [sda] Stopping disk [ 6173.802418] ACPI: EC: interrupt blocked [ 6173.816259] ACPI: Preparing to enter system sleep state S3 [ 6173.816420] ACPI: EC: event blocked [ 6173.816421] ACPI: EC: EC stopped [ 6173.816422] PM: Saving platform NVS memory [ 6173.816753] Disabling non-boot CPUs ... [ 6173.823488] smpboot: CPU 1 is now offline [ 6173.823685] ACPI: Low-level resume complete [ 6173.823685] ACPI: EC: EC started [ 6173.823685] PM: Restoring platform NVS memory [ 6173.830273] Enabling non-boot CPUs ... [ 6173.830330] x86: Booting SMP configuration: [ 6173.830331] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6174.071060] cache: parent cpu1 should not be sleeping [ 6174.210814] CPU1 is up [ 6174.214451] ACPI: Waking up from system sleep state S3 [ 6174.217411] ACPI: EC: interrupt unblocked [ 6174.231385] usb usb3: root hub lost power or was reset [ 6174.231541] usb usb4: root hub lost power or was reset [ 6174.231614] usb usb5: root hub lost power or was reset [ 6174.231663] usb usb6: root hub lost power or was reset [ 6174.231717] usb usb7: root hub lost power or was reset [ 6174.232853] ath: phy0: ASPM enabled: 0x43 [ 6174.233275] sd 0:0:0:0: [sda] Starting disk [ 6174.336739] ACPI: EC: event unblocked [ 6174.474057] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 6174.550490] ata6: SATA link down (SStatus 0 SControl 300) [ 6174.550517] ata5: SATA link down (SStatus 0 SControl 300) [ 6174.571067] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [ 6174.704077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6174.721476] ata2.00: configured for UDMA/100 [ 6175.428101] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6177.450153] ata1.00: configured for UDMA/133 [ 6177.471442] OOM killer enabled. [ 6177.471443] Restarting tasks ... done. [ 6177.481197] video LNXVIDEO:01: Restoring backlight state [ 6177.482187] PM: suspend exit [ 6177.495880] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6177.508818] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6177.513361] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6177.557805] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6179.671994] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6180.861073] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6185.106212] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6185.126157] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6185.129058] wlp4s0: authenticated [ 6185.130257] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6185.151086] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [ 6185.151246] wlp4s0: associated [ 6185.158283] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 8500.638063] CE: hpet increased min_delta_ns to 20115 nsec [ 9970.795430] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [ 9970.795567] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [ 9970.904984] pci_bus 0000:04: Allocating resources [ 9970.905047] pci_bus 0000:05: Allocating resources [ 9970.905070] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9972.052570] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9972.085733] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9972.310039] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9976.340730] PM: suspend entry (deep) [ 9976.340734] PM: Syncing filesystems ... done. [ 9978.039655] Freezing user space processes ... (elapsed 0.015 seconds) done. [ 9978.055356] OOM killer disabled. [ 9978.055357] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 9978.056286] Suspending console(s) (use no_console_suspend to debug) [ 9978.076801] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9978.318817] sd 0:0:0:0: [sda] Stopping disk [ 9978.665473] ACPI: EC: interrupt blocked [ 9978.678211] ACPI: Preparing to enter system sleep state S3 [ 9978.678346] ACPI: EC: event blocked [ 9978.678347] ACPI: EC: EC stopped [ 9978.678348] PM: Saving platform NVS memory [ 9978.678636] Disabling non-boot CPUs ... [ 9978.685475] smpboot: CPU 1 is now offline [ 9978.685635] ACPI: Low-level resume complete [ 9978.685635] ACPI: EC: EC started [ 9978.685635] PM: Restoring platform NVS memory [ 9978.692286] Enabling non-boot CPUs ... [ 9978.692339] x86: Booting SMP configuration: [ 9978.692340] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9978.799722] cache: parent cpu1 should not be sleeping [ 9978.894113] CPU1 is up [ 9978.895801] ACPI: Waking up from system sleep state S3 [ 9978.898746] ACPI: EC: interrupt unblocked [ 9978.912747] usb usb3: root hub lost power or was reset [ 9978.912842] usb usb4: root hub lost power or was reset [ 9978.912906] usb usb5: root hub lost power or was reset [ 9978.912907] usb usb6: root hub lost power or was reset [ 9978.912961] usb usb7: root hub lost power or was reset [ 9978.914090] ath: phy0: ASPM enabled: 0x43 [ 9978.914184] sd 0:0:0:0: [sda] Starting disk [ 9979.016618] ACPI: EC: event unblocked [ 9979.155058] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 9979.237999] ata6: SATA link down (SStatus 0 SControl 300) [ 9979.238036] ata5: SATA link down (SStatus 0 SControl 300) [ 9979.251671] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [ 9979.392411] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9979.400010] ata2.00: configured for UDMA/100 [ 9979.796612] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9982.409099] ata1.00: configured for UDMA/133 [ 9982.430452] OOM killer enabled. [ 9982.430454] Restarting tasks ... done. [ 9982.446106] video LNXVIDEO:01: Restoring backlight state [ 9982.447281] PM: suspend exit [ 9982.484959] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 9982.498825] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 9982.516114] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9982.579146] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9982.697518] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9983.717534] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 9985.009265] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 9985.029366] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 9985.038626] wlp4s0: authenticated [ 9985.045477] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 9985.066316] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [ 9985.066475] wlp4s0: associated [ 9985.074526] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [10393.250269] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [10393.250405] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [10393.362959] pci_bus 0000:04: Allocating resources [10393.362988] pci_bus 0000:05: Allocating resources [10393.363041] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [10393.573003] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10393.646433] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10393.780860] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10394.401756] PM: suspend entry (deep) [10394.401760] PM: Syncing filesystems ... done. [10396.176660] Freezing user space processes ... (elapsed 0.001 seconds) done. [10396.178288] OOM killer disabled. [10396.178289] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [10396.179259] Suspending console(s) (use no_console_suspend to debug) [10396.192146] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10396.411899] sd 0:0:0:0: [sda] Stopping disk [10396.751485] ACPI: EC: interrupt blocked [10396.765236] ACPI: Preparing to enter system sleep state S3 [10396.765372] ACPI: EC: event blocked [10396.765372] ACPI: EC: EC stopped [10396.765373] PM: Saving platform NVS memory [10396.765664] Disabling non-boot CPUs ... [10396.768181] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20180531/evregion-266) [10396.768189] ACPI Error: Method parse/execution failed \_SB.PCI0.WMID.WGDS, AE_BAD_PARAMETER (20180531/psparse-516) [10396.768197] ACPI Error: Method parse/execution failed \_SB.PCI0.WMID.WMBA, AE_BAD_PARAMETER (20180531/psparse-516) [10396.770465] smpboot: CPU 1 is now offline [10396.770967] ACPI: Low-level resume complete [10396.770967] ACPI: EC: EC started [10396.770967] PM: Restoring platform NVS memory [10396.777249] Enabling non-boot CPUs ... [10396.777306] x86: Booting SMP configuration: [10396.777308] smpboot: Booting Node 0 Processor 1 APIC 0x1 [10396.951183] cache: parent cpu1 should not be sleeping [10397.045280] CPU1 is up [10397.047761] ACPI: Waking up from system sleep state S3 [10397.050701] ACPI: EC: interrupt unblocked [10397.064443] usb usb3: root hub lost power or was reset [10397.064660] usb usb4: root hub lost power or was reset [10397.064732] usb usb5: root hub lost power or was reset [10397.064803] usb usb6: root hub lost power or was reset [10397.064868] usb usb7: root hub lost power or was reset [10397.066095] ath: phy0: ASPM enabled: 0x43 [10397.067383] sd 0:0:0:0: [sda] Starting disk [10397.168614] ACPI: EC: event unblocked [10397.308067] usb 2-4: reset high-speed USB device number 3 using ehci-pci [10397.389663] ata6: SATA link down (SStatus 0 SControl 300) [10397.389707] ata5: SATA link down (SStatus 0 SControl 300) [10397.403080] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [10397.544068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10397.551653] ata2.00: configured for UDMA/100 [10398.269973] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10400.441423] ata1.00: configured for UDMA/133 [10400.460348] OOM killer enabled. [10400.460350] Restarting tasks ... done. [10400.473086] video LNXVIDEO:01: Restoring backlight state [10400.476299] PM: suspend exit [10400.500729] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [10400.517152] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [10400.522985] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10400.612334] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10400.675309] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10401.691645] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [10402.874434] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [10402.893399] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [10402.895206] wlp4s0: authenticated [10402.897042] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [10402.962370] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [10402.962518] wlp4s0: associated [10402.971049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [16222.217575] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [16222.217707] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [16222.328930] pci_bus 0000:04: Allocating resources [16222.328958] pci_bus 0000:05: Allocating resources [16222.328976] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [16222.596944] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16222.629180] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16222.693324] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16222.718765] PM: suspend entry (deep) [16222.718768] PM: Syncing filesystems ... [16223.814670] done. [16223.814961] Freezing user space processes ... (elapsed 0.001 seconds) done. [16223.816846] OOM killer disabled. [16223.816848] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16223.818248] Suspending console(s) (use no_console_suspend to debug) [16223.835122] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16224.002117] sd 0:0:0:0: [sda] Stopping disk [16224.332476] ACPI: EC: interrupt blocked [16224.346240] ACPI: Preparing to enter system sleep state S3 [16224.346400] ACPI: EC: event blocked [16224.346401] ACPI: EC: EC stopped [16224.346402] PM: Saving platform NVS memory [16224.346728] Disabling non-boot CPUs ... [16224.353460] smpboot: CPU 1 is now offline [16224.354045] ACPI: Low-level resume complete [16224.354045] ACPI: EC: EC started [16224.354045] PM: Restoring platform NVS memory [16224.360328] Enabling non-boot CPUs ... [16224.360385] x86: Booting SMP configuration: [16224.360387] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16224.990085] cache: parent cpu1 should not be sleeping [16225.406126] CPU1 is up [16225.407746] ACPI: Waking up from system sleep state S3 [16225.410699] ACPI: EC: interrupt unblocked [16225.424603] usb usb5: root hub lost power or was reset [16225.424679] usb usb6: root hub lost power or was reset [16225.424727] usb usb7: root hub lost power or was reset [16225.424773] usb usb3: root hub lost power or was reset [16225.425219] usb usb4: root hub lost power or was reset [16225.425864] ath: phy0: ASPM enabled: 0x43 [16225.425903] sd 0:0:0:0: [sda] Starting disk [16225.529592] ACPI: EC: event unblocked [16225.666037] usb 2-4: reset high-speed USB device number 3 using ehci-pci [16225.749512] ata5: SATA link down (SStatus 0 SControl 300) [16225.749538] ata6: SATA link down (SStatus 0 SControl 300) [16225.764062] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [16225.904042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16225.908551] ata2.00: configured for UDMA/100 [16226.636539] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16228.092184] ata1.00: configured for UDMA/133 [16228.114377] OOM killer enabled. [16228.114378] Restarting tasks ... done. [16228.129086] video LNXVIDEO:01: Restoring backlight state [16228.131003] PM: suspend exit [16228.161460] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [16228.174741] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [16228.183332] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16228.253062] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16228.378991] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16229.402429] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16230.514367] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [16230.533489] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16230.535187] wlp4s0: authenticated [16230.536287] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16230.601639] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [16230.601790] wlp4s0: associated [16230.609138] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [16959.789901] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [16959.790079] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [16959.905305] pci_bus 0000:04: Allocating resources [16959.905334] pci_bus 0000:05: Allocating resources [16959.905358] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [16960.389129] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16960.443535] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16960.527953] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16961.475155] PM: suspend entry (deep) [16961.475160] PM: Syncing filesystems ... done. [16963.863214] Freezing user space processes ... (elapsed 0.024 seconds) done. [16963.887831] OOM killer disabled. [16963.887832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16963.889251] Suspending console(s) (use no_console_suspend to debug) [16963.902167] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16964.153475] sd 0:0:0:0: [sda] Stopping disk [16964.499482] ACPI: EC: interrupt blocked [16964.512225] ACPI: Preparing to enter system sleep state S3 [16964.512361] ACPI: EC: event blocked [16964.512362] ACPI: EC: EC stopped [16964.512363] PM: Saving platform NVS memory [16964.512653] Disabling non-boot CPUs ... [16964.519470] smpboot: CPU 1 is now offline [16964.520049] ACPI: Low-level resume complete [16964.520049] ACPI: EC: EC started [16964.520049] PM: Restoring platform NVS memory [16964.526351] Enabling non-boot CPUs ... [16964.526410] x86: Booting SMP configuration: [16964.526411] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16964.847133] cache: parent cpu1 should not be sleeping [16964.941277] CPU1 is up [16964.943768] ACPI: Waking up from system sleep state S3 [16964.946734] ACPI: EC: interrupt unblocked [16964.961285] usb usb3: root hub lost power or was reset [16964.961569] usb usb4: root hub lost power or was reset [16964.961650] usb usb5: root hub lost power or was reset [16964.961722] usb usb6: root hub lost power or was reset [16964.961786] usb usb7: root hub lost power or was reset [16964.962988] ath: phy0: ASPM enabled: 0x43 [16964.964356] sd 0:0:0:0: [sda] Starting disk [16965.065669] ACPI: EC: event unblocked [16965.204053] usb 2-4: reset high-speed USB device number 3 using ehci-pci [16965.285666] ata6: SATA link down (SStatus 0 SControl 300) [16965.285708] ata5: SATA link down (SStatus 0 SControl 300) [16965.299063] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [16965.441060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16965.448662] ata2.00: configured for UDMA/100 [16966.161577] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16968.179818] ata1.00: configured for UDMA/133 [16968.199460] OOM killer enabled. [16968.199461] Restarting tasks ... [16968.224784] done. [16968.226439] video LNXVIDEO:01: Restoring backlight state [16968.228499] PM: suspend exit [16968.279613] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [16968.293111] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [16968.295961] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16968.384352] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16968.449679] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16969.523353] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [16970.561362] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [16970.581423] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16970.583936] wlp4s0: authenticated [16970.586076] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16970.651428] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=5) [16970.651573] wlp4s0: associated [16970.659250] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [24784.435192] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [24797.525947] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [24797.610433] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [24800.947665] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready