Probe #c2db4be7a9 of Lenovo ThinkPad L520 5015W4...
Log: dmesg.1
[ 0.000000] Linux version 6.11.0-19-generic (XXX@XXX) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #19~24.04.1-Ubuntu SMP PREEMPT_DYNAMIC Mon Feb 17 11:51:52 UTC 2 (Ubuntu 6.11.0-19.19~24.04.1-generic 6.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.11.0-19-generic root=UUID=HASH_AA5-D59B-555B-0853-0DD3D947A60D ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c6a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6a7c000-0x00000000c6a81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6a82000-0x00000000c6bebfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6bec000-0x00000000c6c0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6c0f000-0x00000000c6c6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6c70000-0x00000000c6cf0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6cf1000-0x00000000c6f0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6f0f000-0x00000000c6f17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6f18000-0x00000000c6f1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6f1f000-0x00000000c6f6efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6f6f000-0x00000000c6f9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6f9f000-0x00000000c6fddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6fde000-0x00000000c6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c6fff000-0x00000000c6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 5015W49/5015W49, BIOS 8GET39WW (1.16 ) 03/21/2012
[ 0.000000] DMI: Memory slots populated: 2/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.926 MHz processor
[ 0.002561] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002566] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002581] last_pfn = 0x22f800 max_arch_pfn = 0x400000000
[ 0.002592] total RAM covered: 8048M
[ 0.002891] Found optimal setting for mtrr clean up
[ 0.002893] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.002900] MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs
[ 0.002903] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003845] e820: update [mem 0xc7800000-0xffffffff] usable ==> reserved
[ 0.003857] last_pfn = 0xc7000 max_arch_pfn = 0x400000000
[ 0.012002] found SMP MP-table at [mem 0x000f6a20-0x000f6a2f] RAMDISK: [mem 0x2fdad000-0x33ecdfff] ACPI: Early table checksum verification disabled
[ 0.014346] ACPI: RSDP 0x00000000000F66D0 000024 (v04 LENOVO)
[ 0.014352] ACPI: XSDT 0x00000000C6FF1A45 00006C (v01 LENOVO TP-8G 00001160 LTP 00000000)
[ 0.014361] ACPI: FACP 0x00000000C6FE0000 0000F4 (v03 LENOVO TP-8G 00001160 PTEC 00000001)
[ 0.014369] ACPI: DSDT 0x00000000C6FE1000 00D129 (v02 LENOVO TP-8G 00001160 INTL 20060912)
[ 0.014374] ACPI: FACS 0x00000000C6F8CFC0 000040
[ 0.014378] ACPI: FACS 0x00000000C6F8CFC0 000040
[ 0.014383] ACPI: HPET 0x00000000C6FFED6A 000038 (v01 LENOVO TP-8G 00001160 PTEC 00000001)
[ 0.014387] ACPI: MCFG 0x00000000C6FFEDA2 00003C (v01 LENOVO TP-8G 00001160 PTEC 00000001)
[ 0.014392] ACPI: APIC 0x00000000C6FFEDDE 000084 (v01 LENOVO TP-8G 00001160 LTP 00000000)
[ 0.014397] ACPI: BOOT 0x00000000C6FFEE62 000028 (v01 LENOVO TP-8G 00001160 LTP 00000001)
[ 0.014401] ACPI: SLIC 0x00000000C6FFEE8A 000176 (v01 LENOVO TP-8G 00001160 LTP 00000000)
[ 0.014406] ACPI: TCPA 0x00000000C6FEF000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.014411] ACPI: SSDT 0x00000000C6FDF000 00073E (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.014416] ACPI: SSDT 0x00000000C6FDE000 000996 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.014420] ACPI: Reserving FACP table memory at [mem 0xc6fe0000-0xc6fe00f3] ACPI: Reserving DSDT table memory at [mem 0xc6fe1000-0xc6fee128] ACPI: Reserving FACS table memory at [mem 0xc6f8cfc0-0xc6f8cfff] ACPI: Reserving FACS table memory at [mem 0xc6f8cfc0-0xc6f8cfff] ACPI: Reserving HPET table memory at [mem 0xc6ffed6a-0xc6ffeda1] ACPI: Reserving MCFG table memory at [mem 0xc6ffeda2-0xc6ffeddd] ACPI: Reserving APIC table memory at [mem 0xc6ffedde-0xc6ffee61] ACPI: Reserving BOOT table memory at [mem 0xc6ffee62-0xc6ffee89] ACPI: Reserving SLIC table memory at [mem 0xc6ffee8a-0xc6ffefff] ACPI: Reserving TCPA table memory at [mem 0xc6fef000-0xc6fef031] ACPI: Reserving SSDT table memory at [mem 0xc6fdf000-0xc6fdf73d] ACPI: Reserving SSDT table memory at [mem 0xc6fde000-0xc6fde995] No NUMA configuration found
[ 0.014585] Faking a node at [mem 0x0000000000000000-0x000000022f7fffff] NODE_DATA(0) allocated [mem 0x22f7d1000-0x22f7fbfff] Zone ranges:
[ 0.014869] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000022f7fffff] Device empty
[ 0.014878] Movable zone start for each node
[ 0.014882] Early memory node ranges
[ 0.014883] node 0: [mem 0x0000000000001000-0x000000000009bfff] node 0: [mem 0x0000000000100000-0x000000001fffffff] node 0: [mem 0x0000000020200000-0x000000003fffffff] node 0: [mem 0x0000000040200000-0x00000000c6a7bfff] node 0: [mem 0x00000000c6a82000-0x00000000c6bebfff] node 0: [mem 0x00000000c6c0f000-0x00000000c6c6ffff] node 0: [mem 0x00000000c6f0f000-0x00000000c6f17fff] node 0: [mem 0x00000000c6f1f000-0x00000000c6f6efff] node 0: [mem 0x00000000c6f9f000-0x00000000c6fddfff] node 0: [mem 0x00000000c6fff000-0x00000000c6ffffff] node 0: [mem 0x0000000100000000-0x000000022f7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f7fffff] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014936] On node 0, zone DMA: 100 pages in unavailable ranges
[ 0.016778] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.020787] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.020797] On node 0, zone DMA32: 6 pages in unavailable ranges
[ 0.020800] On node 0, zone DMA32: 35 pages in unavailable ranges
[ 0.020812] On node 0, zone DMA32: 671 pages in unavailable ranges
[ 0.020814] On node 0, zone DMA32: 7 pages in unavailable ranges
[ 0.020817] On node 0, zone DMA32: 48 pages in unavailable ranges
[ 0.020819] On node 0, zone DMA32: 33 pages in unavailable ranges
[ 0.029894] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.029935] On node 0, zone Normal: 2048 pages in unavailable ranges
[ 0.029944] Reserving Intel graphics memory at [mem 0xc8000000-0xcfffffff] ACPI: PM-Timer IO Port: 0x408
[ 0.030255] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.030258] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.030259] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.030260] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.030272] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.030277] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.030279] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.030286] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.030287] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.030293] TSC deadline timer available
[ 0.030300] CPU topo: Max. logical packages: 1
[ 0.030302] CPU topo: Max. logical dies: 1
[ 0.030303] CPU topo: Max. dies per package: 1
[ 0.030309] CPU topo: Max. threads per core: 2
[ 0.030311] CPU topo: Num. cores per package: 2
[ 0.030312] CPU topo: Num. threads per package: 4
[ 0.030313] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.030347] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff] PM: hibernation: Registered nosave memory: [mem 0xc6a7c000-0xc6a81fff] PM: hibernation: Registered nosave memory: [mem 0xc6bec000-0xc6c0efff] PM: hibernation: Registered nosave memory: [mem 0xc6c70000-0xc6cf0fff] PM: hibernation: Registered nosave memory: [mem 0xc6cf1000-0xc6f0efff] PM: hibernation: Registered nosave memory: [mem 0xc6f18000-0xc6f1efff] PM: hibernation: Registered nosave memory: [mem 0xc6f6f000-0xc6f9efff] PM: hibernation: Registered nosave memory: [mem 0xc6fde000-0xc6ffefff] PM: hibernation: Registered nosave memory: [mem 0xc7000000-0xcfffffff] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xe00f7fff] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xe00f9000-0xfed1bfff] available for PCI devices
[ 0.030395] Booting paravirtualized kernel on bare hardware
[ 0.030397] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.030409] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.030800] percpu: Embedded 88 pages/cpu s237568 r8192 d114688 u524288
[ 0.030815] pcpu-alloc: s237568 r8192 d114688 u524288 alloc=1*2097152
[ 0.030819] pcpu-alloc: [0] 0 1 2 3
[ 0.030851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.11.0-19-generic root=UUID=HASH_AA5-D59B-555B-0853-0DD3D947A60D ro quiet splash vt.handoff=7
[ 0.030980] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.11.0-19-generic", will be passed to user space.
[ 0.031939] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.032429] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.032542] Fallback order for Node 0: 0
[ 0.032546] Built 1 zonelists, mobility grouping on. Total pages: 2056315
[ 0.032548] Policy zone: Normal
[ 0.032560] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.032566] software IO TLB: area num 4.
[ 0.124900] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.125077] Kernel/User page tables isolation: enabled
[ 0.125186] ftrace: allocating 59199 entries in 232 pages
[ 0.137835] ftrace: allocated 232 pages with 4 groups
[ 0.139011] Dynamic Preempt: voluntary
[ 0.139276] rcu: Preemptible hierarchical RCU implementation.
[ 0.139278] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.139280] Trampoline variant of Tasks RCU enabled.
[ 0.139281] Rude variant of Tasks RCU enabled.
[ 0.139282] Tracing variant of Tasks RCU enabled.
[ 0.139283] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.139284] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.139298] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.139301] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.139304] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.144189] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.144454] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.144617] Console: colour dummy device 80x25
[ 0.144622] printk: legacy console [tty0] enabled
[ 0.144958] ACPI: Core revision 20240322
[ 0.145326] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.145350] APIC: Switch to symmetric I/O mode setup
[ 0.145423] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.145898] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150344] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21147c20c01, max_idle_ns: 440795274146 ns
[ 0.150353] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.85 BogoMIPS (lpj=2294926)
[ 0.150376] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.150385] CPU0: Thermal monitoring enabled (TM1)
[ 0.150415] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.150417] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.150422] process: using mwait in idle threads
[ 0.150425] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.150429] Spectre V2 : Mitigation: Retpolines
[ 0.150430] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.150431] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.150432] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.150435] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.150437] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.150439] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.150442] MDS: Mitigation: Clear CPU buffers
[ 0.150443] MMIO Stale Data: Unknown: No mitigations
[ 0.150450] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.150452] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.150453] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.150455] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.150458] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.184217] Freeing SMP alternatives memory: 48K
[ 0.184227] pid_max: default: 32768 minimum: 301
[ 0.185257] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,ima,evm
[ 0.185577] landlock: Up and running.
[ 0.185579] Yama: becoming mindful.
[ 0.185689] AppArmor: AppArmor initialized
[ 0.186072] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.186088] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.187468] smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.187872] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.187897] ... version: 3
[ 0.187899] ... bit width: 48
[ 0.187900] ... generic registers: 4
[ 0.187901] ... value mask: 0000ffffffffffff
[ 0.187902] ... max period: 00007fffffffffff
[ 0.187904] ... fixed-purpose events: 3
[ 0.187905] ... event mask: 000000070000000f
[ 0.188108] signal: max sigframe size: 1776
[ 0.188132] Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.190337] rcu: Hierarchical SRCU implementation.
[ 0.190342] rcu: Max phase no-delay instances is 400.
[ 0.190428] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.191145] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.191251] smp: Bringing up secondary CPUs ...
[ 0.191463] smpboot: x86: Booting SMP configuration:
[ 0.191465] .... node #0, CPUs: #1 #2 #3
[ 0.194538] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.195423] smp: Brought up 1 node, 4 CPUs
[ 0.195423] smpboot: Total of 4 processors activated (18359.40 BogoMIPS)
[ 0.196514] Memory: 7885940K/8225260K available (22528K kernel code, 4518K rwdata, 14876K rodata, 5096K init, 4528K bss, 329876K reserved, 0K cma-reserved)
[ 0.196872] devtmpfs: initialized
[ 0.196872] x86/mm: Memory block size: 128MB
[ 0.198576] ACPI: PM: Registering ACPI NVS region [mem 0xc6c70000-0xc6cf0fff] (528384 bytes)
[ 0.198576] ACPI: PM: Registering ACPI NVS region [mem 0xc6f6f000-0xc6f9efff] (196608 bytes)
[ 0.198576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.198576] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.199481] pinctrl core: initialized pinctrl subsystem
[ 0.199598] PM: RTC time: 23:42:57, date: 2025-03-22
[ 0.200714] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.200986] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.201093] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.201205] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.201541] thermal_sys: Registered thermal governor 'fair_share'
[ 0.201544] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.201546] thermal_sys: Registered thermal governor 'step_wise'
[ 0.201547] thermal_sys: Registered thermal governor 'user_space'
[ 0.201549] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.201559] EISA bus registered
[ 0.201570] cpuidle: using governor ladder
[ 0.201570] cpuidle: using governor menu
[ 0.201570] Simple Boot Flag at 0x36 set to 0x1
[ 0.201570] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.201866] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ 0.201877] PCI: Using configuration type 1 for base access
[ 0.201951] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.202015] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.204416] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.204416] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.206507] ACPI: Added _OSI(Module Device)
[ 0.206511] ACPI: Added _OSI(Processor Device)
[ 0.206513] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206514] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.220419] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.223008] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.252880] ACPI: Dynamic OEM Table Load:
[ 0.252892] ACPI: SSDT 0xFFFF9F4F814BC800 0007E7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253235] ACPI: Dynamic OEM Table Load:
[ 0.253242] ACPI: SSDT 0xFFFF9F4F80ABA800 000303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254355] ACPI: Dynamic OEM Table Load:
[ 0.254355] ACPI: SSDT 0xFFFF9F4F80C4C200 000119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.258010] ACPI: EC: EC started
[ 0.258013] ACPI: EC: interrupt blocked
[ 0.259985] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.259989] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.259992] ACPI: Interpreter enabled
[ 0.260028] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.260030] ACPI: Using IOAPIC for interrupt routing
[ 0.261071] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: [Firmware Info]: ECAM [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.266167] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ 0.266173] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266175] PCI: Using E820 reservations for host bridge windows
[ 0.266644] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.272870] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.278549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.278559] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.278648] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.279039] acpi PNP0A08:00: host bridge window expanded to [mem 0xd0000000-0xfeb00000 window]; [mem 0xfeaff000-0xfeb00000 window] ignored
[ 0.279410] PCI host bridge to bus 0000:00
[ 0.279419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeb00000 window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 conventional PCI endpoint
[ 0.279544] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 conventional PCI endpoint
[ 0.279554] pci 0000:00:02.0: BAR 0 [mem 0xf0000000-0xf03fffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0x1800-0x183f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.279740] pci 0000:00:16.0: BAR 0 [mem 0xf0904000-0xf090400f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.279905] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.279923] pci 0000:00:1a.0: BAR 0 [mem 0xf0907000-0xf09073ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.280125] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ 0.280145] pci 0000:00:1b.0: BAR 0 [mem 0xf0900000-0xf0903fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280328] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port
[ 0.280364] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.280558] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 PCIe Root Port
[ 0.280591] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.280785] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 PCIe Root Port
[ 0.280818] pci 0000:00:1c.2: PCI bridge to [bus 04] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.281011] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 PCIe Root Port
[ 0.281043] pci 0000:00:1c.3: PCI bridge to [bus 05-07] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] pci 0000:00:1c.3: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.281239] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port
[ 0.281290] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.281532] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 PCIe Root Port
[ 0.281583] pci 0000:00:1c.5: PCI bridge to [bus 09] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.5: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.281828] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.281846] pci 0000:00:1d.0: BAR 0 [mem 0xf0908000-0xf09083ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.282048] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 conventional PCI endpoint
[ 0.282271] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 conventional PCI endpoint
[ 0.282286] pci 0000:00:1f.2: BAR 0 [io 0x1858-0x185f] pci 0000:00:1f.2: BAR 1 [io 0x184c-0x184f] pci 0000:00:1f.2: BAR 2 [io 0x1850-0x1857] pci 0000:00:1f.2: BAR 3 [io 0x1848-0x184b] pci 0000:00:1f.2: BAR 4 [io 0x1860-0x187f] pci 0000:00:1f.2: BAR 5 [mem 0xf0909000-0xf09097ff] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.282481] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.282501] pci 0000:00:1f.3: BAR 0 [mem 0xf090a000-0xf090a0ff 64bit] pci 0000:00:1f.3: BAR 4 [io 0x1880-0x189f] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:8176] type 00 class 0x028000 PCIe Endpoint
[ 0.282831] pci 0000:03:00.0: BAR 0 [io 0x2000-0x20ff] pci 0000:03:00.0: BAR 2 [mem 0xf0500000-0xf0503fff 64bit] pci 0000:03:00.0: supports D1 D2
[ 0.283047] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.283216] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000 PCIe Endpoint
[ 0.283348] pci 0000:04:00.0: BAR 0 [mem 0xf0600000-0xf0600fff] pci 0000:04:00.0: supports D1 D2
[ 0.283518] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.283658] pci 0000:00:1c.2: PCI bridge to [bus 04] acpiphp: Slot [1] registered
[ 0.283751] pci 0000:00:1c.3: PCI bridge to [bus 05-07] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.284158] pci 0000:09:00.0: BAR 0 [io 0x4000-0x40ff] pci 0000:09:00.0: BAR 2 [mem 0xf0a04000-0xf0a04fff 64bit pref] pci 0000:09:00.0: BAR 4 [mem 0xf0a00000-0xf0a03fff 64bit pref] pci 0000:09:00.0: supports D1 D2
[ 0.284712] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285013] pci 0000:00:1c.5: PCI bridge to [bus 09] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.287824] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.287909] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.287994] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.288082] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.288085] ACPI: PCI: Interrupt link LNKE disabled
[ 0.288167] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.288169] ACPI: PCI: Interrupt link LNKF disabled
[ 0.288250] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.288334] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.289336] ACPI: EC: interrupt unblocked
[ 0.289338] ACPI: EC: event unblocked
[ 0.289342] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.289343] ACPI: EC: GPE=0x16
[ 0.289346] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.289348] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.289479] iommu: Default domain type: Translated
[ 0.289479] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.289650] SCSI subsystem initialized
[ 0.289661] libata version 3.00 loaded.
[ 0.289661] ACPI: bus type USB registered
[ 0.289661] usbcore: registered new interface driver usbfs
[ 0.289661] usbcore: registered new interface driver hub
[ 0.289661] usbcore: registered new device driver usb
[ 0.289661] pps_core: LinuxPPS API ver. 1 registered
[ 0.289661] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.289661] PTP clock support registered
[ 0.289661] EDAC MC: Ver: 3.0.0
[ 0.290653] NetLabel: Initializing
[ 0.290656] NetLabel: domain hash size = 128
[ 0.290658] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.290684] NetLabel: unlabeled traffic allowed by default
[ 0.290711] mctp: management component transport protocol core
[ 0.290711] NET: Registered PF_MCTP protocol family
[ 0.290711] PCI: Using ACPI for IRQ routing
[ 0.290711] PCI: pci_cache_line_size set to 64 bytes
[ 0.290711] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] e820: reserve RAM buffer [mem 0xc6a7c000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc6bec000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc6c70000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc6f18000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc6f6f000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc6fde000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc7000000-0xc7ffffff] e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.290711] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.290711] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.290711] vgaarb: loaded
[ 0.290711] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.290711] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.292385] clocksource: Switched to clocksource tsc-early
[ 0.293698] VFS: Disk quotas dquot_6.6.0
[ 0.293738] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.293970] AppArmor: AppArmor Filesystem Enabled
[ 0.293996] pnp: PnP ACPI init
[ 0.294184] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.294189] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.294192] system 00:00: [io 0xffff] has been reserved
[ 0.294194] system 00:00: [io 0xffff] has been reserved
[ 0.294196] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.294199] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.294201] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.294203] system 00:00: [io 0x1600-0x16fe] has been reserved
[ 0.294205] system 00:00: [io 0xfe00] has been reserved
[ 0.294207] system 00:00: [io 0x0700-0x070f] has been reserved
[ 0.294320] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.295480] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.295484] system 00:05: [mem 0x00000000-0x00007fff] could not be reserved
[ 0.295487] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.295489] system 00:05: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.295492] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.295494] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.295496] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.295498] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.295501] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.295503] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.295505] system 00:05: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.297900] pnp: PnP ACPI: found 6 devices
[ 0.304610] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.304856] NET: Registered PF_INET protocol family
[ 0.304988] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.327480] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.327521] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.327573] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.327855] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.328209] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.328431] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.328528] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.328564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.328682] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.328692] NET: Registered PF_XDP protocol family
[ 0.328704] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.328710] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.328715] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.328718] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 0.328721] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[ 0.328738] pci 0000:00:1c.2: bridge window [mem 0xe0100000-0xe02fffff 64bit pref]: assigned
[ 0.328743] pci 0000:00:1c.4: bridge window [mem 0xe0300000-0xe04fffff]: assigned
[ 0.328747] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe06fffff 64bit pref]: assigned
[ 0.328751] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]: assigned
[ 0.328754] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]: assigned
[ 0.328759] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] pci 0000:00:1c.2: PCI bridge to [bus 04] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff] pci 0000:00:1c.2: bridge window [mem 0xe0100000-0xe02fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-07] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] pci 0000:00:1c.3: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 08] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.4: bridge window [mem 0xe0300000-0xe04fffff] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe06fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 09] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.5: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfeb00000 window] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf06fffff] pci_bus 0000:04: resource 2 [mem 0xe0100000-0xe02fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff] pci_bus 0000:05: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] pci_bus 0000:08: resource 1 [mem 0xe0300000-0xe04fffff] pci_bus 0000:08: resource 2 [mem 0xe0500000-0xe06fffff 64bit pref] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] pci_bus 0000:09: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref] PCI: CLS 64 bytes, default 64
[ 0.329540] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.329541] software IO TLB: mapped [mem 0x00000000bcc00000-0x00000000c0c00000] (64MB)
[ 0.329607] Trying to unpack rootfs image as initramfs...
[ 0.330382] Initialise system trusted keyrings
[ 0.330401] Key type blacklist registered
[ 0.330492] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.330530] zbud: loaded
[ 0.332627] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.333539] fuse: init (API version 7.40)
[ 0.333843] integrity: Platform Keyring initialized
[ 0.333853] integrity: Machine keyring initialized
[ 0.352680] Key type asymmetric registered
[ 0.352687] Asymmetric key parser 'x509' registered
[ 0.352774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.352888] io scheduler mq-deadline registered
[ 0.354104] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.466160] ACPI: AC: AC Adapter [ACAD] (off-line)
[ 0.466280] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.466346] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.466434] ACPI: button: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.466530] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.466632] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.471251] ACPI: thermal: Thermal Zone [TZ00] (35 C)
[ 0.471533] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.475851] Linux agpgart interface v0.103
[ 0.479417] loop: module loaded
[ 0.479837] ACPI: bus type drm_connector registered
[ 0.481485] tun: Universal TUN/TAP device driver, 1.6
[ 0.481593] PPP generic driver version 2.4.2
[ 0.481896] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.481950] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.481968] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.482004] ehci-pci 0000:00:1a.0: debug port 2
[ 0.485996] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0907000
[ 0.491871] Freeing initrd memory: 66692K
[ 0.526171] ACPI: battery: Slot [BAT1] (battery present)
[ 0.528706] i8042: Detected active multiplexing controller, rev 1.1
[ 0.529861] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.529870] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.529873] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.529875] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.529877] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.530075] mousedev: PS/2 mouse device common for all mice
[ 0.530302] rtc_cmos 00:01: RTC can wake from S4
[ 0.530376] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.530530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 0.530535] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.530538] usb usb1: Product: EHCI Host Controller
[ 0.530542] usb usb1: Manufacturer: Linux 6.11.0-19-generic ehci_hcd
[ 0.530545] usb usb1: SerialNumber: ...
[ 0.530668] rtc_cmos 00:01: registered as rtc0
[ 0.530705] rtc_cmos 00:01: setting system clock to 2025-03-22T23:42:57 UTC (1742686977)
[ 0.530765] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.530785] hub 1-0:1.0: USB hub found
[ 0.530786] i2c_dev: i2c /dev entries driver
[ 0.530828] hub 1-0:1.0: 3 ports detected
[ 0.530925] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.530987] device-mapper: uevent: version 1.0.3
[ 0.531102] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX
[ 0.531144] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.531145] platform eisa.0: Probing EISA bus 0
[ 0.531151] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.531155] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.531156] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.531160] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.531164] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.531167] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.531171] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.531173] ehci-pci 0000:00:1d.0: debug port 2
[ 0.531174] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.531178] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.531181] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.531183] platform eisa.0: EISA: Detected 0 cards
[ 0.531191] intel_pstate: Intel P-state driver initializing
[ 0.535186] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0908000
[ 0.535190] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.535695] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.537190] fbcon: Deferring console take-over
[ 0.537205] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.537386] drop_monitor: Initializing network drop monitor service
[ 0.537780] NET: Registered PF_INET6 protocol family
[ 0.541366] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.541462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 0.541466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.541469] usb usb2: Product: EHCI Host Controller
[ 0.541471] usb usb2: Manufacturer: Linux 6.11.0-19-generic ehci_hcd
[ 0.541473] usb usb2: SerialNumber: ...
[ 0.541664] hub 2-0:1.0: USB hub found
[ 0.541676] hub 2-0:1.0: 3 ports detected
[ 0.547986] Segment Routing with IPv6
[ 0.548020] In-situ OAM (IOAM) with IPv6
[ 0.548080] NET: Registered PF_PACKET protocol family
[ 0.548155] Key type dns_resolver registered
[ 0.548850] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.548924] microcode: Current revision: 0x0000002f
[ 0.548927] microcode: Updated early from: 0x00000025
[ 0.549021] IPI shorthand broadcast: enabled
[ 0.551586] sched_clock: Marking stable (550490110, 860311)->(572911223, -21560802)
[ 0.551844] registered taskstats version 1
[ 0.552141] Loading compiled-in X.509 certificates
[ 0.553206] Loaded X.509 cert 'Build time autogenerated kernel key: 81facc2b0c2c6f4a0b463946bfa0b8ef0d12a9eb'
[ 0.554155] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.555063] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.555067] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.555100] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.555125] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 0.555149] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 0.555175] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 0.555199] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 0.555222] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 0.555252] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 0.555276] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 0.561649] Demotion targets for Node 0: null
[ 0.561888] Key type .fscrypt registered
[ 0.561891] Key type fscrypt-provisioning registered
[ 0.578291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.583949] Key type encrypted registered
[ 0.583968] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.583983] ima: No TPM chip found, activating TPM-bypass!
[ 0.584000] Loading compiled-in module X.509 certificates
[ 0.584948] Loaded X.509 cert 'Build time autogenerated kernel key: 81facc2b0c2c6f4a0b463946bfa0b8ef0d12a9eb'
[ 0.584952] ima: Allocated hash algorithm: sha256
[ 0.584974] ima: No architecture policies found
[ 0.585006] evm: Initialising EVM extended attributes:
[ 0.585008] evm: security.selinux
[ 0.585010] evm: security.SMACK64
[ 0.585011] evm: security.SMACK64EXEC
[ 0.585012] evm: security.SMACK64TRANSMUTE
[ 0.585013] evm: security.SMACK64MMAP
[ 0.585014] evm: security.apparmor
[ 0.585015] evm: security.ima
[ 0.585016] evm: security.capability
[ 0.585017] evm: HMAC attrs: 0x1
[ 0.585488] PM: Magic number: 1:760:757
[ 0.585513] tty ttyS8: hash matches
[ 0.591311] RAS: Correctable Errors collector initialized.
[ 0.613606] clk: Disabling unused clocks
[ 0.613614] PM: genpd: Disabling unused power domains
[ 0.615996] Freeing unused decrypted memory: 2028K
[ 0.616994] Freeing unused kernel image (initmem) memory: 5096K
[ 0.617120] Write protecting the kernel read-only data: 38912k
[ 0.617732] Freeing unused kernel image (rodata/data gap) memory: 1508K
[ 0.680556] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.680561] x86/mm: Checking user space page tables
[ 0.741377] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.741398] Run /init as init process
[ 0.741402] with arguments:
[ 0.741404] /init
[ 0.741406] splash
[ 0.741408] with environment:
[ 0.741409] HOME=/
[ 0.741411] TERM=linux
[ 0.741413] BOOT_IMAGE=/boot/vmlinuz-6.11.0-19-generic
[ 0.775363] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.793374] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.906807] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.906816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=...
[ 0.907070] hub 1-1:1.0: USB hub found
[ 0.909358] hub 1-1:1.0: 6 ports detected
[ 0.922409] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.922421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=...
[ 0.924192] hub 2-1:1.0: USB hub found
[ 0.924273] hub 2-1:1.0: 6 ports detected
[ 1.157595] ahci 0000:00:1f.2: version 3.0
[ 1.158826] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.167705] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.169221] Non-volatile memory driver v1.3
[ 1.169780] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[ 1.169790] ahci 0000:00:1f.2: 5/6 ports implemented (port mask 0x3b)
[ 1.169795] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.180293] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 1.180299] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1.180300] thinkpad_acpi: ThinkPad BIOS 8GET39WW (1.16 ), EC 80HT01WW-00.00000
[ 1.180302] thinkpad_acpi: Lenovo ThinkPad L520, model 5015W49
[ 1.182363] scsi host0: ahci
[ 1.182644] scsi host1: ahci
[ 1.182858] scsi host2: ahci
[ 1.183145] scsi host3: ahci
[ 1.183400] thinkpad_acpi: radio switch found; radios are enabled
[ 1.183435] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 1.183624] scsi host4: ahci
[ 1.183664] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 1.183668] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 1.183840] r8169 0000:09:00.0 eth0: RTL8168d/8111d, FC5A20BF2ED3E022EA0E04CEE8E72D17, XID 283, IRQ 26
[ 1.183850] r8169 0000:09:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] scsi host5: ahci
[ 1.185173] ata1: SATA max UDMA/133 abar m2048@0xf0909000 port 0xf0909100 irq 24 lpm-pol 3
[ 1.185180] ata2: SATA max UDMA/133 abar m2048@0xf0909000 port 0xf0909180 irq 24 lpm-pol 3
[ 1.185184] ata3: DUMMY
[ 1.185187] ata4: SATA max UDMA/133 abar m2048@0xf0909000 port 0xf0909280 irq 24 lpm-pol 0
[ 1.185192] ata5: SATA max UDMA/133 abar m2048@0xf0909000 port 0xf0909300 irq 24 lpm-pol 0
[ 1.185196] ata6: SATA max UDMA/133 abar m2048@0xf0909000 port 0xf0909380 irq 24 lpm-pol 0
[ 1.185538] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 1.185799] usb 1-1.6: new full-speed USB device number 3 using ehci-pci
[ 1.186321] r8169 0000:09:00.0 enp9s0: renamed from eth0
[ 1.191556] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1.194886] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.202113] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1.202279] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1.207742] thinkpad_acpi: secondary fan control detected & enabled
[ 1.208847] thinkpad_acpi: battery 2 registered (start 0, stop 0, behaviours: 0x1)
[ 1.208881] ACPI: battery: new extension: ThinkPad Battery Extension
[ 1.209194] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 1.278384] usb 1-1.6: New USB device found, idVendor=0a5c, idProduct=217f, bcdDevice= 7.48
[ 1.278396] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.278401] usb 1-1.6: Product: Broadcom Bluetooth Device
[ 1.278404] usb 1-1.6: Manufacturer: Broadcom Corp
[ 1.278407] usb 1-1.6: SerialNumber: ...
[ 1.395820] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 1.395874] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 1.395919] clocksource: Switched to clocksource tsc
[ 1.431953] usb 2-1.4: New USB device found, idVendor=5986, idProduct=03b4, bcdDevice= 5.25
[ 1.431977] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.431985] usb 2-1.4: Product: Integrated Camera
[ 1.431991] usb 2-1.4: Manufacturer: Ricoh Company Ltd.
[ 1.457453] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.458053] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1.458277] ata1.00: ATA-9: HS-SSD-E100 128G, SN07985, max UDMA/133
[ 1.458346] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.458572] ata1.00: Features: Dev-Sleep
[ 1.458999] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1.459327] ata1.00: configured for UDMA/133
[ 1.470023] scsi 0:0:0:0: Direct-Access ATA HS-SSD-E100 128G 985 PQ: 0 ANSI: 5
[ 1.471265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.471315] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.471371] sd 0:0:0:0: [sda] Write Protect is off
[ 1.471385] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.471491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.471649] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.485619] sda: sda1 sda2
[ 1.485936] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.777143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.780446] ata2.00: ACPI cmd ef/CDAFD4DDA34B62B84EC8618743A6934C(SET FEATURES) filtered out
[ 1.782313] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
[ 1.785934] ata2.00: ACPI cmd ef/CDAFD4DDA34B62B84EC8618743A6934C(SET FEATURES) filtered out
[ 1.787797] ata2.00: configured for UDMA/100
[ 1.792193] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
[ 1.843809] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.843830] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.866215] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.866560] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.121085] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..4820] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.199854] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 2.199945] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 2.247761] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 2.488687] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.800906] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.012994] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.260037] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input14
[ 3.433874] random: crng init done
[ 3.499646] EXT4-fs (sda2): mounted filesystem HASH_AA5-D59B-555B-0853-0DD3D947A60D ro with ordered data mode. Quota mode: none.
[ 4.092981] EXT4-fs (sda2): re-mounted HASH_AA5-D59B-555B-0853-0DD3D947A60D r/w. Quota mode: none.
[ 4.095229] lp: driver loaded but no devices found
[ 4.105415] ppdev: user-space parallel port driver
[ 4.131432] Adding 4194300k swap on /swap.img. Priority:-2 extents:33 across:4587520k SS
[ 4.245553] loop0: detected capacity change from 0 to 8
[ 4.262727] loop1: detected capacity change from 0 to 151328
[ 4.279640] loop2: detected capacity change from 0 to 22800
[ 4.295827] loop3: detected capacity change from 0 to 528456
[ 4.297241] loop4: detected capacity change from 0 to 1056784
[ 4.312195] loop5: detected capacity change from 0 to 187776
[ 4.322678] loop6: detected capacity change from 0 to 22056
[ 4.324473] loop7: detected capacity change from 0 to 91008
[ 4.338613] loop8: detected capacity change from 0 to 1136
[ 4.341107] loop9: detected capacity change from 0 to 431640
[ 5.514909] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240322/utaddress-204)
[ 5.514924] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 5.514930] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ 5.514940] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 5.514943] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ 5.514951] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 5.514954] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ 5.514961] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 5.514963] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.524824] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.528117] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.528528] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.574656] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.578843] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 5.579361] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 6.681012] i915 0000:00:02.0: [drm] Found SANDYBRIDGE (device ID 0116) display version 6.00 stepping N/A
[ 6.732015] Bluetooth: Core ver 2.22
[ 6.732058] NET: Registered PF_BLUETOOTH protocol family
[ 6.732062] Bluetooth: HCI device and connection manager initialized
[ 6.732068] Bluetooth: HCI socket layer initialized
[ 6.732073] Bluetooth: L2CAP socket layer initialized
[ 6.732081] Bluetooth: SCO socket layer initialized
[ 6.734913] mc: Linux media interface: v0.10
[ 6.738296] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.747569] at24 0-0050: supply vcc not found, using dummy regulator
[ 6.758056] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.758066] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.758069] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.758072] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.760805] at24 0-0050: 256 byte spd EEPROM, read-only
[ 6.768014] at24 0-0052: supply vcc not found, using dummy regulator
[ 6.778060] at24 0-0052: 256 byte spd EEPROM, read-only
[ 6.802173] videodev: Linux video capture interface: v2.00
[ 6.854752] cryptd: max_cpu_qlen set to 1000
[ 6.875715] rtl8192ce: Chip Version ID: B_CHIP_88C
[ 6.892817] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 6.899900] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.903215] rtlwifi: rtlwifi: wireless switch is on
[ 6.905195] usbcore: registered new interface driver btusb
[ 7.039737] rtl8192ce 0000:03:00.0 wlp3s0: renamed from wlan0
[ 7.092986] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[ 7.162115] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
[ 7.190783] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.203952] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 7.221626] acpi device:37: registered as cooling_device5
[ 7.248240] intel_rapl_common: Found RAPL domain package
[ 7.248249] intel_rapl_common: Found RAPL domain core
[ 7.248252] intel_rapl_common: Found RAPL domain uncore
[ 7.279047] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.279639] usb 2-1.4: Found UVC 1.00 device Integrated Camera (5986:03b4)
[ 7.279852] fbcon: i915drmfb (fb0) is primary device
[ 7.279856] fbcon: Deferring console take-over
[ 7.279860] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 7.400650] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.400663] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.400668] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.400673] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.400676] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.400680] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.400684] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.448622] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 7.448735] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 7.448842] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 7.448953] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 7.449044] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 7.527448] loop10: detected capacity change from 0 to 8
[ 7.806023] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.806033] Bluetooth: BNEP filters: protocol multicast
[ 7.806040] Bluetooth: BNEP socket layer initialized
[ 7.809546] Bluetooth: MGMT ver 1.23
[ 8.017764] NET: Registered PF_QIPCRTR protocol family
[ 8.409547] usbcore: registered new interface driver uvcvideo
[ 9.090598] RTL8211B Gigabit Ethernet r8169-0-900:00: attached PHY driver (mii_bus:phy_addr=r8169-0-900:00, irq=MAC)
[ 9.248175] r8169 0000:09:00.0 enp9s0: No native access to PCI extended config space, falling back to CSI
[ 9.251057] r8169 0000:09:00.0 enp9s0: Link is Down
[ 10.739570] wlp3s0: authenticate with 1F33EAEBDB8587A233F443C3985FE083 (local address=401AD3EA4D9F88514FAC4629702C92D9)
[ 10.739581] wlp3s0: send auth to 1F33EAEBDB8587A233F443C3985FE083 (try 1/3)
[ 10.750953] wlp3s0: authenticated
[ 10.751949] wlp3s0: associate with 1F33EAEBDB8587A233F443C3985FE083 (try 1/3)
[ 10.755776] wlp3s0: RX AssocResp from 1F33EAEBDB8587A233F443C3985FE083 (capab=0x1c11 status=0 aid=4)
[ 10.756557] wlp3s0: associated
[ 10.773986] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 1F33EAEBDB8587A233F443C3985FE083
[ 11.966209] Bluetooth: RFCOMM TTY layer initialized
[ 11.966235] Bluetooth: RFCOMM socket layer initialized
[ 11.966248] Bluetooth: RFCOMM ver 1.11
[ 164.228195] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 164.239711] sd 0:0:0:0: [sda] Stopping disk
[ 170.629828] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 170.641568] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 170.642445] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 170.642819] ata1.00: configured for UDMA/133
[ 170.642873] ata1.00: Entering active power mode
[ 170.653197] sd 0:0:0:0: [sda] Starting disk
[ 170.653362] sd 0:0:0:0: [sda] Starting disk
[ 170.653713] sd 0:0:0:0: [sda] Starting disk
[ 228.817421] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 228.829111] sd 0:0:0:0: [sda] Stopping disk
[ 234.632634] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 234.644360] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 234.645213] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 234.645701] ata1.00: configured for UDMA/133
[ 234.645784] ata1.00: Entering active power mode
[ 234.656127] sd 0:0:0:0: [sda] Starting disk
[ 234.656312] sd 0:0:0:0: [sda] Starting disk
[ 234.656521] sd 0:0:0:0: [sda] Starting disk
[ 286.194740] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 286.206507] sd 0:0:0:0: [sda] Stopping disk
[ 292.490021] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 292.501779] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 292.502847] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 292.503176] ata1.00: configured for UDMA/133
[ 292.503215] ata1.00: Entering active power mode
[ 292.513531] sd 0:0:0:0: [sda] Starting disk
[ 292.513656] sd 0:0:0:0: [sda] Starting disk
[ 292.513827] sd 0:0:0:0: [sda] Starting disk
[ 366.036293] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 366.047796] sd 0:0:0:0: [sda] Stopping disk
[ 371.851485] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 371.863131] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 371.864609] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 371.865212] ata1.00: configured for UDMA/133
[ 371.865380] ata1.00: Entering active power mode
[ 371.875724] sd 0:0:0:0: [sda] Starting disk
[ 371.875845] sd 0:0:0:0: [sda] Starting disk
[ 371.881328] sd 0:0:0:0: [sda] Starting disk
[ 397.872294] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 397.883864] sd 0:0:0:0: [sda] Stopping disk
[ 403.596090] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 403.607931] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 403.609154] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 403.609493] ata1.00: configured for UDMA/133
[ 403.609532] ata1.00: Entering active power mode
[ 403.619916] sd 0:0:0:0: [sda] Starting disk
[ 403.620021] sd 0:0:0:0: [sda] Starting disk
[ 403.625918] sd 0:0:0:0: [sda] Starting disk
[ 428.381494] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 428.392963] sd 0:0:0:0: [sda] Stopping disk
[ 434.828816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 434.840564] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 434.841750] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 434.842091] ata1.00: configured for UDMA/133
[ 434.842130] ata1.00: Entering active power mode
[ 434.852480] sd 0:0:0:0: [sda] Starting disk
[ 434.852598] sd 0:0:0:0: [sda] Starting disk
[ 434.858536] sd 0:0:0:0: [sda] Starting disk
[ 466.382209] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 466.393570] sd 0:0:0:0: [sda] Stopping disk
[ 472.717517] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 472.729426] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 472.730636] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 472.731243] ata1.00: configured for UDMA/133
[ 472.731292] ata1.00: Entering active power mode
[ 472.741612] sd 0:0:0:0: [sda] Starting disk
[ 472.741744] sd 0:0:0:0: [sda] Starting disk
[ 472.742211] sd 0:0:0:0: [sda] Starting disk
[ 499.158869] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 499.170391] sd 0:0:0:0: [sda] Stopping disk
[ 505.486146] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 505.497928] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 505.499130] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 505.499468] ata1.00: configured for UDMA/133
[ 505.499506] ata1.00: Entering active power mode
[ 505.509812] sd 0:0:0:0: [sda] Starting disk
[ 505.509948] sd 0:0:0:0: [sda] Starting disk
[ 505.515850] sd 0:0:0:0: [sda] Starting disk
[ 541.268210] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 541.279720] sd 0:0:0:0: [sda] Stopping disk
[ 547.466728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 547.478520] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 547.479164] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 547.479509] ata1.00: configured for UDMA/133
[ 547.479551] ata1.00: Entering active power mode
[ 547.489820] sd 0:0:0:0: [sda] Starting disk
[ 547.489932] sd 0:0:0:0: [sda] Starting disk
[ 547.490391] sd 0:0:0:0: [sda] Starting disk
[ 573.264982] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 573.276435] sd 0:0:0:0: [sda] Stopping disk
[ 579.719603] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 579.731300] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 579.731974] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 579.732326] ata1.00: configured for UDMA/133
[ 579.732375] ata1.00: Entering active power mode
[ 579.742697] sd 0:0:0:0: [sda] Starting disk
[ 579.742815] sd 0:0:0:0: [sda] Starting disk
[ 579.743376] sd 0:0:0:0: [sda] Starting disk
[ 606.169461] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 606.181375] sd 0:0:0:0: [sda] Stopping disk
[ 608.589575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 608.601387] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 608.602265] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 608.602586] ata1.00: configured for UDMA/133
[ 608.602626] ata1.00: Entering active power mode
[ 608.612938] sd 0:0:0:0: [sda] Starting disk
[ 608.613055] sd 0:0:0:0: [sda] Starting disk
[ 608.613225] sd 0:0:0:0: [sda] Starting disk
[ 638.781153] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 638.792839] sd 0:0:0:0: [sda] Stopping disk
[ 644.739405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 644.751129] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 644.752220] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 644.752883] ata1.00: configured for UDMA/133
[ 644.752987] ata1.00: Entering active power mode
[ 644.763275] sd 0:0:0:0: [sda] Starting disk
[ 644.763435] sd 0:0:0:0: [sda] Starting disk
[ 644.769214] sd 0:0:0:0: [sda] Starting disk
[ 764.435656] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 764.447407] sd 0:0:0:0: [sda] Stopping disk
[ 769.663628] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 769.675397] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 769.676482] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 769.676810] ata1.00: configured for UDMA/133
[ 769.676850] ata1.00: Entering active power mode
[ 769.687180] sd 0:0:0:0: [sda] Starting disk
[ 769.687261] sd 0:0:0:0: [sda] Starting disk
[ 769.687313] sd 0:0:0:0: [sda] Starting disk
[ 893.202687] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 893.214216] sd 0:0:0:0: [sda] Stopping disk
[ 898.101567] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 898.113322] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 898.114292] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 898.114654] ata1.00: configured for UDMA/133
[ 898.114700] ata1.00: Entering active power mode
[ 898.125049] sd 0:0:0:0: [sda] Starting disk
[ 898.125159] sd 0:0:0:0: [sda] Starting disk
[ 898.134009] sd 0:0:0:0: [sda] Starting disk
[ 965.293020] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 965.304520] sd 0:0:0:0: [sda] Stopping disk
[ 971.390077] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 971.401746] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 971.402436] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 971.402809] ata1.00: configured for UDMA/133
[ 971.402854] ata1.00: Entering active power mode
[ 971.413169] sd 0:0:0:0: [sda] Starting disk
[ 971.413291] sd 0:0:0:0: [sda] Starting disk
[ 971.413770] sd 0:0:0:0: [sda] Starting disk
[ 1037.978811] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 1118.787921] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1118.799696] sd 0:0:0:0: [sda] Stopping disk
[ 1124.475000] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1124.486962] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1124.488190] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1124.488771] ata1.00: configured for UDMA/133
[ 1124.488825] ata1.00: Entering active power mode
[ 1124.499070] sd 0:0:0:0: [sda] Starting disk
[ 1124.499237] sd 0:0:0:0: [sda] Starting disk
[ 1124.504709] sd 0:0:0:0: [sda] Starting disk
[ 1150.867120] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1150.878808] sd 0:0:0:0: [sda] Stopping disk
[ 1156.730034] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1156.741846] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1156.742983] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1156.743324] ata1.00: configured for UDMA/133
[ 1156.743364] ata1.00: Entering active power mode
[ 1156.753684] sd 0:0:0:0: [sda] Starting disk
[ 1156.753856] sd 0:0:0:0: [sda] Starting disk
[ 1156.753897] sd 0:0:0:0: [sda] Starting disk
[ 1256.320955] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1256.332355] sd 0:0:0:0: [sda] Stopping disk
[ 1256.356856] sd 0:0:0:0: [sda] Starting disk
[ 1256.368852] sd 0:0:0:0: [sda] Starting disk
[ 1266.706908] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=120 ID=56561 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1267.218902] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=120 ID=56562 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1267.730500] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=119 ID=56563 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1269.778925] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=119 ID=56564 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1273.205671] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=120 ID=56565 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1281.042929] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=120 ID=56566 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1295.890508] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=121 ID=56567 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1320.594665] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1320.606131] sd 0:0:0:0: [sda] Stopping disk
[ 1325.074421] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=76 TOS=0x00 PREC=0x00 TTL=121 ID=56568 PROTO=TCP SPT=443 DPT=45830 WINDOW=1044 RES=0x00 ACK PSH URGP=0
[ 1326.711108] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1326.723011] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1326.724100] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1326.724703] ata1.00: configured for UDMA/133
[ 1326.724761] ata1.00: Entering active power mode
[ 1326.735018] sd 0:0:0:0: [sda] Starting disk
[ 1326.735143] sd 0:0:0:0: [sda] Starting disk
[ 1326.740795] sd 0:0:0:0: [sda] Starting disk
[ 1353.029278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1353.040742] sd 0:0:0:0: [sda] Stopping disk
[ 1354.638735] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1354.650555] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1354.651455] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1354.651798] ata1.00: configured for UDMA/133
[ 1354.651837] ata1.00: Entering active power mode
[ 1354.662153] sd 0:0:0:0: [sda] Starting disk
[ 1354.662274] sd 0:0:0:0: [sda] Starting disk
[ 1354.662497] sd 0:0:0:0: [sda] Starting disk
[ 1418.911352] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 1419.334151] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:99350FD4887FE31271A816F21BF00B14 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13953 PROTO=2
[ 1509.694000] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1509.705772] sd 0:0:0:0: [sda] Stopping disk
[ 1513.227935] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1513.239580] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1513.240412] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1513.240774] ata1.00: configured for UDMA/133
[ 1513.240849] ata1.00: Entering active power mode
[ 1513.251043] sd 0:0:0:0: [sda] Starting disk
[ 1513.251134] sd 0:0:0:0: [sda] Starting disk
[ 1513.251860] sd 0:0:0:0: [sda] Starting disk
[ 1518.970208] loop10: detected capacity change from 0 to 437951
[ 1525.665310] loop11: detected capacity change from 0 to 437951
[ 1526.627282] loop12: detected capacity change from 0 to 437951
[ 1531.894287] loop13: detected capacity change from 0 to 437951
[ 1681.935683] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:99350FD4887FE31271A816F21BF00B14 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=25453 PROTO=2
[ 1772.425619] loop14: detected capacity change from 0 to 437951
[ 1798.075546] loop15: detected capacity change from 0 to 437951
[ 1951.300599] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1951.311868] sd 0:0:0:0: [sda] Stopping disk
[ 1957.488756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1957.500190] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1957.500686] ata1.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A(SECURITY FREEZE LOCK) filtered out
[ 1957.500967] ata1.00: configured for UDMA/133
[ 1957.500995] ata1.00: Entering active power mode
[ 1957.511114] sd 0:0:0:0: [sda] Starting disk
[ 1957.511170] sd 0:0:0:0: [sda] Starting disk
[ 1957.512465] sd 0:0:0:0: [sda] Starting disk
[ 1991.527755] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 2053.783174] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:8D50E6696AF7FE1AC17F62F731A10367 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 2060.302234] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:99350FD4887FE31271A816F21BF00B14 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=34987 PROTO=2
[ 2189.056883] [UFW BLOCK] IN=wlp3s0 OUT= MAC=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:99350FD4887FE31271A816F21BF00B14 SRC=XXX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=60414 PROTO=2
[ 2313.273482] workqueue: delayed_fput hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND
[ 2313.818502] wlp3s0: deauthenticating from 1F33EAEBDB8587A233F443C3985FE083 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2313.819806] r8169 0000:09:00.0 enp9s0: Link is Down