[ 0.563661] i2c_dev: i2c /dev entries driver [ 0.577027] SCSI subsystem initialized [ 0.585699] device-mapper: uevent: version 1.0.3 [ 0.585772] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.697215] xor: automatically using best checksumming function avx [ 0.714919] raid6: avx2x4 gen() 34844 MB/s [ 0.731917] raid6: avx2x2 gen() 30854 MB/s [ 0.748915] raid6: avx2x1 gen() 33213 MB/s [ 0.748917] raid6: using algorithm avx2x4 gen() 34844 MB/s [ 0.765896] raid6: .... xor() 13524 MB/s, rmw enabled [ 0.765907] raid6: using avx2x2 recovery algorithm [ 0.838320] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no [ 0.850967] ACPI: bus type USB registered [ 0.850982] usbcore: registered new interface driver usbfs [ 0.850986] usbcore: registered new interface driver hub [ 0.850993] usbcore: registered new device driver usb [ 0.851898] random: crng init done [ 1.180871] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.184982] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.195148] ACPI: button: Power Button [PWRF] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.196493] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.196504] ehci-pci 0000:00:1a.0: debug port 2 [ 1.200194] Linux agpgart interface v0.103 [ 1.200431] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000 [ 1.206908] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.206948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.206951] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.206953] usb usb1: Product: EHCI Host Controller [ 1.206955] usb usb1: Manufacturer: Linux 6.1.1-desktop-1omv2290 ehci_hcd [ 1.206956] usb usb1: SerialNumber: ... [ 1.207076] hub 1-0:1.0: USB hub found [ 1.207082] hub 1-0:1.0: 2 ports detected [ 1.207530] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.207538] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.207557] ehci-pci 0000:00:1d.0: debug port 2 [ 1.211475] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000 [ 1.216899] tsc: Refined TSC clocksource calibration: 3591.682 MHz [ 1.216905] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a15be52, max_idle_ns: 440795280454 ns [ 1.216925] clocksource: Switched to clocksource tsc [ 1.217908] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.217944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.217946] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.217949] usb usb2: Product: EHCI Host Controller [ 1.217950] usb usb2: Manufacturer: Linux 6.1.1-desktop-1omv2290 ehci_hcd [ 1.217952] usb usb2: SerialNumber: ... [ 1.218386] hub 2-0:1.0: USB hub found [ 1.218392] hub 2-0:1.0: 2 ports detected [ 1.218538] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.218545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.219602] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.219780] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.219783] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.219786] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.219821] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.219823] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.219825] usb usb3: Product: xHCI Host Controller [ 1.219827] usb usb3: Manufacturer: Linux 6.1.1-desktop-1omv2290 xhci-hcd [ 1.219828] usb usb3: SerialNumber: ... [ 1.221334] cryptd: max_cpu_qlen set to 1000 [ 1.227551] hub 3-0:1.0: USB hub found [ 1.227566] hub 3-0:1.0: 10 ports detected [ 1.227998] AVX2 version of gcm_enc/dec engaged. [ 1.228029] AES CTR mode by8 optimization enabled [ 1.229942] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.229946] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.229947] usb usb4: Product: xHCI Host Controller [ 1.229949] usb usb4: Manufacturer: Linux 6.1.1-desktop-1omv2290 xhci-hcd [ 1.229951] usb usb4: SerialNumber: ... [ 1.230045] hub 4-0:1.0: USB hub found [ 1.230053] hub 4-0:1.0: 2 ports detected [ 1.242823] libata version 3.00 loaded. [ 1.248226] ahci 0000:00:1f.2: version 3.0 [ 1.248396] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.248401] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems [ 1.249176] scsi host0: ahci [ 1.249303] scsi host1: ahci [ 1.249390] scsi host2: ahci [ 1.249481] scsi host3: ahci [ 1.249536] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 31 [ 1.249538] ata2: DUMMY [ 1.249539] ata3: DUMMY [ 1.249540] ata4: DUMMY [ 1.272890] ACPI: bus type drm_connector registered [ 1.450902] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.458903] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.466898] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.558014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559174] ata1.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133 [ 1.559355] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.560232] ata1.00: configured for UDMA/133 [ 1.560307] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5 [ 1.579224] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.579229] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.582537] hub 1-1:1.0: USB hub found [ 1.582596] hub 1-1:1.0: 4 ports detected [ 1.588222] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.588226] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.588394] hub 2-1:1.0: USB hub found [ 1.588473] hub 2-1:1.0: 6 ports detected [ 1.594478] usb 3-4: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b [ 1.594482] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.594484] usb 3-4: Product: USB2.0 Hub [ 1.595259] hub 3-4:1.0: USB hub found [ 1.595513] hub 3-4:1.0: 4 ports detected [ 1.595756] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.595759] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.595768] sd 0:0:0:0: [sda] Write Protect is off [ 1.595770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.595782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.595798] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.705669] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 1.705938] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.710902] usb 3-8: new high-speed USB device number 3 using xhci_hcd [ 1.820317] [drm] radeon kernel modesetting enabled. [ 1.820357] radeon 0000:01:00.0: SI support disabled by module param [ 1.825836] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.837173] usb 3-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 1.837178] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.837180] usb 3-8: Product: USB2.0-CRW [ 1.837182] usb 3-8: Manufacturer: Generic [ 1.837183] usb 3-8: SerialNumber: ... [ 1.843482] usbcore: registered new interface driver rtsx_usb [ 1.900903] usb 3-4.3: new low-speed USB device number 4 using xhci_hcd [ 1.980447] usb 3-4.3: New USB device found, idVendor=2635, idProduct=0601, bcdDevice= 1.00 [ 1.980452] usb 3-4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.980454] usb 3-4.3: Product: 2.4G RF MOUSE [ 1.990179] hid: raw HID events driver (C) Jiri Kosina [ 1.995018] usbcore: registered new interface driver usbhid [ 1.995021] usbhid: USB HID core driver [ 1.997696] input: 2.4G RF MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:2635:0601.0001/input/input2 [ 1.997773] hid-generic 0003:2635:0601.0001: input,hidraw0: USB HID v1.11 Mouse [ 2.4G RF MOUSE] on usb-0000:00:14.0-4.3/input0 [ 2.090943] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 2.218578] usb 3-10: string descriptor 0 read error: -22 [ 2.218582] usb 3-10: New USB device found, idVendor=04ca, idProduct=3006, bcdDevice= 0.02 [ 2.218584] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.280932] usb 3-4.4: new full-speed USB device number 6 using xhci_hcd [ 2.359422] usb 3-4.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.359426] usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.359428] usb 3-4.4: Product: USB Receiver [ 2.359429] usb 3-4.4: Manufacturer: Logitech [ 2.365785] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.0/0003:046D:C534.0002/input/input3 [ 2.416959] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4.4/input0 [ 2.419236] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/input/input4 [ 2.419315] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/input/input5 [ 2.470949] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/input/input6 [ 2.471017] hid-generic 0003:046D:C534.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4.4/input1 [ 3.549152] [drm] amdgpu kernel modesetting enabled. [ 3.549227] amdgpu: CRAT table not found [ 3.549230] amdgpu: Virtual CRAT table created for CPU [ 3.549243] amdgpu: Topology: Add CPU node [ 3.549328] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 3.551425] Console: switching to colour dummy device 80x25 [ 3.551555] [drm] initializing kernel modesetting (OLAND 0x1002:0x6611 0x174B:0x4248 0x00). [ 3.551568] [drm] register mmio base: 0xF7E00000 [ 3.551569] [drm] register mmio size: 262144 [ 3.551606] [drm] add ip block number 0 <si_common> [ 3.551607] [drm] add ip block number 1 <gmc_v6_0> [ 3.551608] [drm] add ip block number 2 <si_ih> [ 3.551609] [drm] add ip block number 3 <gfx_v6_0> [ 3.551610] [drm] add ip block number 4 <si_dma> [ 3.551612] [drm] add ip block number 5 <si_dpm> [ 3.551613] [drm] add ip block number 6 <dce_v6_0> [ 3.551614] [drm] add ip block number 7 <uvd_v3_1> [ 3.551616] kfd kfd: amdgpu: OLAND not supported in kfd [ 3.558927] [drm] BIOS signature incorrect 4e 7 [ 3.558932] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000e7fff window] caller amdgpu_read_bios+0x38/0xd0 [amdgpu] mapping multiple BARs [ 3.559284] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 3.559307] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 3.559310] amdgpu: ATOM BIOS: 113-4E248001-003 [ 3.559320] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 3.560275] [drm] PCIE gen 2 link speeds already enabled [ 3.560466] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.560986] logitech-djreceiver 0003:046D:C534.0002: hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4.4/input0 [ 3.564049] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 3.564053] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 3.564061] [drm] Detected VRAM RAM=2048M, BAR=256M [ 3.564062] [drm] RAM width 128bits DDR3 [ 3.564331] [drm] amdgpu: 2048M of VRAM memory ready [ 3.564333] [drm] amdgpu: 7973M of GTT memory ready. [ 3.564341] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.564789] amdgpu 0000:01:00.0: amdgpu: PCIE GART of 1024M enabled (table at 0x000000F400A00000). [ 3.579549] [drm] Internal thermal controller with fan control [ 3.579558] [drm] amdgpu: dpm initialized [ 3.579583] [drm] AMDGPU Display Connectors [ 3.579584] [drm] Connector 0: [ 3.579585] [drm] HDMI-A-1 [ 3.579586] [drm] HPD1 [ 3.579587] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953 [ 3.579589] [drm] Encoders: [ 3.579590] [drm] DFP1: INTERNAL_UNIPHY [ 3.579591] [drm] Connector 1: [ 3.579592] [drm] DVI-I-1 [ 3.579593] [drm] HPD2 [ 3.579593] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 3.579595] [drm] Encoders: [ 3.579596] [drm] DFP2: INTERNAL_UNIPHY [ 3.579596] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.593119] [drm] Found UVD firmware Version: 64.0 Family ID: 13 [ 3.660406] logitech-djreceiver 0003:046D:C534.0003: hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4.4/input1 [ 3.712979] logitech-djreceiver 0003:046D:C534.0003: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 3.713306] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/0003:046D:4023.0004/input/input9 [ 3.713363] hid-generic 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-4.4/input1:1 [ 3.714979] logitech-djreceiver 0003:046D:C534.0003: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.716141] input: Logitech Wireless Mouse PID:4091 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/0003:046D:4091.0005/input/input14 [ 3.716214] hid-generic 0003:046D:4091.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4091] on usb-0000:00:14.0-4.4/input1:2 [ 4.134376] [drm] UVD initialized successfully. [ 4.134492] amdgpu 0000:01:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 6, active_cu_number 6 [ 4.494478] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:01:00.0 on minor 0 [ 4.575942] fbcon: amdgpudrmfb (fb0) is primary device [ 4.666064] Console: switching to colour frame buffer device 240x67 [ 4.740375] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 5.484991] logitech-hidpp-device 0003:046D:4023.0004: HID++ 2.0 device connected. [ 6.973177] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/0003:046D:4023.0004/input/input18 [ 6.973253] logitech-hidpp-device 0003:046D:4023.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-4.4/input1:1 [ 6.993020] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:046D:C534.0003/0003:046D:4091.0005/input/input19 [ 6.993089] logitech-hidpp-device 0003:046D:4091.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-4.4/input1:2 [ 7.320803] EXT4-fs (sda7): mounted filesystem with ordered data mode. Quota mode: none. [ 10.080602] EXT4-fs (sda7): re-mounted. Quota mode: none. [ 11.676818] zram0: detected capacity change from 0 to 16328704 [ 11.856029] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 11.856058] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 11.856368] i2c i2c-8: 2/2 memory slots populated (from DMI) [ 11.856653] i2c i2c-8: Successfully instantiated SPD at 0x50 [ 11.962376] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ 11.962382] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.962389] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.962391] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.962400] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 11.962402] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.962404] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.962412] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 11.962414] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.962416] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.962416] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.030467] thermal LNXTHERM:00: registered as thermal_zone0 [ 12.030469] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 12.030624] thermal LNXTHERM:01: registered as thermal_zone1 [ 12.030625] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 12.371813] Adding 8164348k swap on /dev/zram0. Priority:100 extents:1 across:8164348k SSDscFS [ 12.447469] Bluetooth: Core ver 2.22 [ 12.447484] NET: Registered PF_BLUETOOTH protocol family [ 12.447485] Bluetooth: HCI device and connection manager initialized [ 12.447496] Bluetooth: HCI socket layer initialized [ 12.447498] Bluetooth: L2CAP socket layer initialized [ 12.447499] Bluetooth: SCO socket layer initialized [ 12.544958] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 12.578256] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 12.578282] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 12.582170] usbcore: registered new interface driver btusb [ 12.583746] usbcore: registered new interface driver ath3k [ 12.704801] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 12.704805] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.704807] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.704808] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.704809] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.704810] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 12.704811] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 12.704812] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.714851] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 12.714891] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 12.714931] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 [ 12.714965] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [ 12.715000] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [ 12.815851] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 12.815853] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.815854] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.815855] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.846189] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 66A0E38510ACA37E2F62E0A819FAD1E2, XID 4c0, IRQ 35 [ 12.846195] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.000447] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.373630] iTCO_vendor_support: vendor-support=0 [ 13.379519] iTCO_wdt iTCO_wdt.3.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 13.379591] iTCO_wdt iTCO_wdt.3.auto: initialized. heartbeat=30 sec (nowayout=0) [ 13.416296] at24 8-0050: supply vcc not found, using dummy regulator [ 13.416843] at24 8-0050: 256 byte spd EEPROM, read-only [ 13.453624] intel_rapl_common: Found RAPL domain package [ 13.453626] intel_rapl_common: Found RAPL domain core [ 13.453627] intel_rapl_common: Found RAPL domain dram [ 13.453631] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 13.453634] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 13.516958] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 13.594716] ath: phy0: ASPM enabled: 0x43 [ 13.594721] ath: EEPROM regdomain: 0x6a [ 13.594722] ath: EEPROM indicates we should expect a direct regpair map [ 13.594724] ath: Country alpha2 being used: 00 [ 13.594725] ath: Regpair used: 0x6a [ 13.595192] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.595439] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffa064c2e80000, irq=19 [ 13.604312] spi-nor spi0.0: s25fl064k (8192 Kbytes) [ 13.609676] Creating 1 MTD partitions on "intel-spi": [ 13.609679] 0x000000000000-0x000000800000 : "BIOS" [ 13.841630] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 17.174950] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.174953] Bluetooth: BNEP filters: protocol multicast [ 17.174957] Bluetooth: BNEP socket layer initialized [ 17.189874] Bluetooth: MGMT ver 1.22 [ 19.608911] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 19.748670] r8169 0000:03:00.0 enp3s0: Link is Down [ 20.039877] NET: Registered PF_PACKET protocol family [ 31.048628] Bluetooth: RFCOMM TTY layer initialized [ 31.048635] Bluetooth: RFCOMM socket layer initialized [ 31.048637] Bluetooth: RFCOMM ver 1.11 [ 90.000579] wlp4s0: authenticate with 292B71A64884F3635F5EE0F3AAB21C7D [ 90.011643] wlp4s0: send auth to 292B71A64884F3635F5EE0F3AAB21C7D (try 1/3) [ 90.012603] wlp4s0: authenticated [ 90.013898] wlp4s0: associate with 292B71A64884F3635F5EE0F3AAB21C7D (try 1/3) [ 90.015328] wlp4s0: RX AssocResp from 292B71A64884F3635F5EE0F3AAB21C7D (capab=0x31 status=0 aid=2) [ 90.015452] wlp4s0: associated [ 90.274923] ------------[ cut here ]------------ [ 90.274925] memcpy: detected field-spanning write (size 32) of single field "hk.kv_val" at drivers/net/wireless/ath/key.c:506 (size 16) [ 90.274941] WARNING: CPU: 3 PID: 846 at drivers/net/wireless/ath/key.c:506 ath_key_config+0x37c/0x3a0 [ath] Modules linked in: ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_objref nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_reject_inet nf_reject_ipv6 nf_reject_ipv4 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 af_packet ip_set nf_tables nfnetlink cmac algif_skcipher bnep cmdlinepart spi_nor mtd ath9k ath9k_common ath9k_hw intel_rapl_msr at24 regmap_i2c iTCO_wdt intel_pmc_bxt spi_intel_platform spi_intel iTCO_vendor_support watchdog ath mac80211 intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel libarc4 cfg80211 kvm irqbypass r8169 realtek rapl mdio_devres rtsx_usb_ms memstick libphy intel_cstate intel_uncore snd_hda_codec_realtek wmi_bmof snd_hda_codec_generic intel_pch_thermal ledtrig_audio ath3k snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec btusb btrtl btmtk btintel btbcm bluetooth snd_hda_core ecdh_generic [ 90.274982] rfkill ecc snd_hwdep snd_pcm joydev input_leds mei_hdcp mei_pxp snd_timer snd soundcore fan thermal lpc_ich mac_hid i2c_i801 i2c_smbus tiny_power_button fuse zram dmi_sysfs hid_logitech_hidpp hid_logitech_dj hid_generic amdgpu usbhid hid rtsx_usb_sdmmc mmc_core rtsx_usb iommu_v2 drm_buddy gpu_sched radeon i2c_algo_bit drm_display_helper sd_mod drm_ttm_helper t10_pi ttm crct10dif_pclmul crc64_rocksoft_generic crc32_pclmul crc64_rocksoft drm_kms_helper polyval_clmulni crc64 polyval_generic gf128mul sysimgblt ghash_clmulni_intel syscopyarea sysfillrect sha512_ssse3 fb_sys_fops evdev ahci libahci drm libata aesni_intel crypto_simd cryptd xhci_pci xhci_pci_renesas xhci_hcd agpgart drm_panel_orientation_quirks ehci_pci video wmi button ehci_hcd usbcore usb_common btrfs raid6_pq xor libcrc32c crc32c_intel dm_mirror dm_region_hash dm_log tls dm_multipath dm_mod scsi_mod scsi_common i2c_dev i2c_core msr ipv6 [ 90.275021] CPU: 3 PID: 846 Comm: wpa_supplicant Not tainted 6.1.1-desktop-1omv2290 #1 ea24c369bef0a7f512fe4ec4160f1072223d7526 [ 90.275023] Hardware name: Acer Aspire TC-605/Aspire TC-605, BIOS P11-A4 03/21/2014 [ 90.275025] RIP: 0010:ath_key_config+0x37c/0x3a0 [ath] Code: 41 be fb ff ff ff eb bc c6 05 95 4b 00 00 01 b9 10 00 00 00 48 c7 c7 5d b3 b3 c1 48 89 ee 48 c7 c2 52 b4 b3 c1 e8 34 45 56 f0 <0f> 0b e9 61 fd ff ff 0f 0b eb 8f 0f 0b eb 8b 48 c7 c7 ae b6 b3 c1 [ 90.275030] RSP: 0018:ffffa064c2e2f5f8 EFLAGS: 00010246 [ 90.275032] RAX: d7a47554fd30bb00 RBX: ffff8ef4cc05062c RCX: 0000000000000027 [ 90.275033] RDX: 0000000000000000 RSI: c0000000ffffefff RDI: ffff8ef78ece0498 [ 90.275034] RBP: 0000000000000020 R08: 0000000000000000 R09: ffffffffb3a74700 [ 90.275035] R10: 0000000000000000 R11: 00000000ffffefff R12: ffff8ef495f50078 [ 90.275036] R13: ffff8ef4cc050618 R14: 00000000ffffffa1 R15: ffff8ef482e1db80 [ 90.275036] FS: 00007fcda5f36d00(0000) GS:ffff8ef78ecc0000(0000) knlGS:0000000000000000 [ 90.275038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.275039] CR2: 00007fcf6a676930 CR3: 000000011191e002 CR4: 00000000001706e0 [ 90.275040] Call Trace: [ 90.275041] <TASK> [ 90.275044] ath9k_set_key+0x1f0/0x360 [ath9k c418046a6ab606c54b6eabd4ab3f2cffdfd7d92e] drv_set_key+0xb6/0x1c0 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] ieee80211_key_enable_hw_accel+0xd9/0x240 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] ieee80211_key_replace+0x3f5/0x710 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] ? synchronize_rcu+0x78/0x210 [ 90.275138] ieee80211_key_link+0x2de/0x3b0 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] ? __kmalloc+0x9a/0x1b0 [ 90.275166] ? ieee80211_key_alloc+0x40b/0x4e0 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] ieee80211_add_key+0x202/0x270 [mac80211 7a0a2110bf666e3fa5db8a68d4936ff03f7f036a] rdev_add_key+0x47/0x140 [cfg80211 60811e85b136a7553f2dee615aac122f94eb18c9] ? nl80211_parse_key+0x7a/0x310 [cfg80211 60811e85b136a7553f2dee615aac122f94eb18c9] nl80211_new_key+0x283/0x2d0 [cfg80211 60811e85b136a7553f2dee615aac122f94eb18c9] genl_rcv_msg+0x39e/0x3d0 [ 90.275309] ? nl80211_set_key+0x4a0/0x4a0 [cfg80211 60811e85b136a7553f2dee615aac122f94eb18c9] ? genl_bind+0x100/0x100 [ 90.275338] netlink_rcv_skb+0x10d/0x140 [ 90.275341] genl_rcv+0x32/0x40 [ 90.275343] netlink_unicast+0x251/0x340 [ 90.275345] netlink_sendmsg+0x332/0x410 [ 90.275348] ____sys_sendmsg+0x206/0x250 [ 90.275351] ? __import_iovec+0x32/0x120 [ 90.275355] ___sys_sendmsg+0xe3/0x120 [ 90.275357] ? slab_post_alloc_hook+0x23e/0x2f0 [ 90.275360] ? kmem_cache_alloc+0x150/0x2b0 [ 90.275363] ? inode_wait_for_writeback+0xd5/0x100 [ 90.275366] __x64_sys_sendmsg+0x8e/0xd0 [ 90.275368] do_syscall_64+0x6a/0xa0 [ 90.275370] ? __sys_setsockopt+0x12a/0x1d0 [ 90.275372] ? syscall_exit_to_user_mode+0x26/0x110 [ 90.275374] ? do_syscall_64+0x79/0xa0 [ 90.275376] ? exit_to_user_mode_loop+0x96/0xe0 [ 90.275379] ? exit_to_user_mode_prepare+0x6a/0xa0 [ 90.275381] ? syscall_exit_to_user_mode+0x26/0x110 [ 90.275383] ? do_syscall_64+0x79/0xa0 [ 90.275384] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 90.275387] RIP: 0033:0x7fcda59256b0 [ 90.275389] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 80 3d 31 3f 0d 00 00 74 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 90.275390] RSP: 002b:00007ffe7639ee38 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 90.275392] RAX: ffffffffffffffda RBX: 00000000012a0310 RCX: 00007fcda59256b0 [ 90.275393] RDX: 0000000000000000 RSI: 00007ffe7639ee88 RDI: 0000000000000005 [ 90.275393] RBP: 00007ffe7639ef48 R08: 0000000000000004 R09: 000000000000000d [ 90.275394] R10: 00007ffe7639ef48 R11: 0000000000000202 R12: 0000000000000001 [ 90.275395] R13: 000000000129e3e0 R14: 000000000132a0f0 R15: 00007ffe7639ee88 [ 90.275396] </TASK> [ 90.275397] ---[ end trace 0000000000000000 ]--- [ 90.275444] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 129.521250] logitech-hidpp-device 0003:046D:4091.0005: HID++ 4.5 device connected. [ 429.339474] Non-volatile memory driver v1.3 [ 429.519060] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 429.530667] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 430.259289] r8169 0000:03:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 433.554176] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 528.451461] wlp4s0: deauthenticating from 292B71A64884F3635F5EE0F3AAB21C7D by local choice (Reason: 3=DEAUTH_LEAVING) [ 529.397263] zram0: detected capacity change from 16328704 to 0