[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 6.1.0-15-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.66-1 (2023-12-09) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-amd64 root=UUID=HASH_107-CFC2-00FB-F303-C50B102882CA ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbb6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cbb70000-0x00000000cbb76fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cbb77000-0x00000000cc419fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc41a000-0x00000000cc6b0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cc6b1000-0x00000000dd887fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd888000-0x00000000dd8f5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd8f6000-0x00000000dd90efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd90f000-0x00000000de369fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de36a000-0x00000000def6dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000def6e000-0x00000000deffffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Acer Inc. [ 0.000000] efi: ESRT=0xdef6c918 ACPI=0xdd8fb000 ACPI 2.0=0xdd8fb000 SMBIOS=0xf04c0 MOKvar=0xde865000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Veriton M4630G/Veriton M4630G, BIOS P21-C1 04/10/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3591.721 MHz processor [ 0.000632] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000634] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000641] last_pfn = 0x21e000 max_arch_pfn = 0x400000000 [ 0.000735] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001175] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001179] last_pfn = 0xdd888 max_arch_pfn = 0x400000000 [ 0.007368] found SMP MP-table at [mem 0x000fd790-0x000fd79f] esrt: Reserving ESRT space from 0x00000000def6c918 to 0x00000000def6c950. [ 0.007411] Using GB pages for direct mapping [ 0.007962] RAMDISK: [mem 0x2e78d000-0x333bdfff] ACPI: Early table checksum verification disabled [ 0.007968] ACPI: RSDP 0x00000000DD8FB000 000024 (v02 ACRSYS) [ 0.007971] ACPI: XSDT 0x00000000DD8FB090 0000A4 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.007975] ACPI: FACP 0x00000000DD909AC8 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.007979] ACPI: DSDT 0x00000000DD8FB1C8 00E8FF (v02 ACRSYS ACRPRDCT 00000028 INTL 20120711) [ 0.007981] ACPI: FACS 0x00000000DE368080 000040 [ 0.007983] ACPI: APIC 0x00000000DD909BD8 000092 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.007985] ACPI: FPDT 0x00000000DD909C70 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.007987] ACPI: TCPA 0x00000000DD909CB8 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.007990] ACPI: MSDM 0x00000000DD909CF0 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.007992] ACPI: DBGP 0x00000000DD909D48 000034 (v01 ACRSYS ACRPRDCT 00000000 MSFT 00000005) [ 0.007994] ACPI: SLIC 0x00000000DD909D80 000176 (v01 ACRSYS ACRPRDCT 01072000 AMI 00010013) [ 0.007996] ACPI: SSDT 0x00000000DD909EF8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.007998] ACPI: SSDT 0x00000000DD90A438 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.008000] ACPI: MCFG 0x00000000DD90AF10 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097) [ 0.008002] ACPI: HPET 0x00000000DD90AF50 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005) [ 0.008004] ACPI: SSDT 0x00000000DD90AF88 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.008007] ACPI: SSDT 0x00000000DD90B2F8 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.008009] ACPI: ASF! 0x00000000DD90E820 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.008011] ACPI: DMAR 0x00000000DD90E8C8 000080 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.008013] ACPI: BGRT 0x00000000DD90E948 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.008015] ACPI: Reserving FACP table memory at [mem 0xdd909ac8-0xdd909bd3] ACPI: Reserving DSDT table memory at [mem 0xdd8fb1c8-0xdd909ac6] ACPI: Reserving FACS table memory at [mem 0xde368080-0xde3680bf] ACPI: Reserving APIC table memory at [mem 0xdd909bd8-0xdd909c69] ACPI: Reserving FPDT table memory at [mem 0xdd909c70-0xdd909cb3] ACPI: Reserving TCPA table memory at [mem 0xdd909cb8-0xdd909ce9] ACPI: Reserving MSDM table memory at [mem 0xdd909cf0-0xdd909d44] ACPI: Reserving DBGP table memory at [mem 0xdd909d48-0xdd909d7b] ACPI: Reserving SLIC table memory at [mem 0xdd909d80-0xdd909ef5] ACPI: Reserving SSDT table memory at [mem 0xdd909ef8-0xdd90a430] ACPI: Reserving SSDT table memory at [mem 0xdd90a438-0xdd90af0f] ACPI: Reserving MCFG table memory at [mem 0xdd90af10-0xdd90af4b] ACPI: Reserving HPET table memory at [mem 0xdd90af50-0xdd90af87] ACPI: Reserving SSDT table memory at [mem 0xdd90af88-0xdd90b2f4] ACPI: Reserving SSDT table memory at [mem 0xdd90b2f8-0xdd90e81f] ACPI: Reserving ASF! table memory at [mem 0xdd90e820-0xdd90e8c4] ACPI: Reserving DMAR table memory at [mem 0xdd90e8c8-0xdd90e947] ACPI: Reserving BGRT table memory at [mem 0xdd90e948-0xdd90e97f] No NUMA configuration found [ 0.008085] Faking a node at [mem 0x0000000000000000-0x000000021dffffff] NODE_DATA(0) allocated [mem 0x21dfd5000-0x21dffffff] Zone ranges: [ 0.008291] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021dffffff] Device empty [ 0.008296] Movable zone start for each node [ 0.008298] Early memory node ranges [ 0.008298] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000cbb6ffff] node 0: [mem 0x00000000cbb77000-0x00000000cc419fff] node 0: [mem 0x00000000cc6b1000-0x00000000dd887fff] node 0: [mem 0x0000000100000000-0x000000021dffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021dffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008308] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008336] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.014987] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.015571] On node 0, zone DMA32: 663 pages in unavailable ranges [ 0.015931] On node 0, zone Normal: 10104 pages in unavailable ranges [ 0.016005] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.016091] ACPI: PM-Timer IO Port: 0x1808 [ 0.016097] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.016111] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.016113] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.016115] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.016118] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.016119] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.016133] e820: update [mem 0x13a8e000-0x13aeafff] usable ==> reserved [ 0.016143] TSC deadline timer available [ 0.016144] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.016163] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x13a8e000-0x13aeafff] PM: hibernation: Registered nosave memory: [mem 0xcbb70000-0xcbb76fff] PM: hibernation: Registered nosave memory: [mem 0xcc41a000-0xcc6b0fff] PM: hibernation: Registered nosave memory: [mem 0xdd888000-0xdd8f5fff] PM: hibernation: Registered nosave memory: [mem 0xdd8f6000-0xdd90efff] PM: hibernation: Registered nosave memory: [mem 0xdd90f000-0xde369fff] PM: hibernation: Registered nosave memory: [mem 0xde36a000-0xdef6dfff] PM: hibernation: Registered nosave memory: [mem 0xdef6e000-0xdeffffff] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.016183] Booting paravirtualized kernel on bare hardware [ 0.016185] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.019674] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.019869] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.019875] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.019877] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.019903] Fallback order for Node 0: 0 [ 0.019905] Built 1 zonelists, mobility grouping on. Total pages: 2045458 [ 0.019906] Policy zone: Normal [ 0.019907] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-amd64 root=UUID=HASH_107-CFC2-00FB-F303-C50B102882CA ro quiet splash [ 0.019952] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-amd64", will be passed to user space. [ 0.019975] random: crng init done [ 0.020329] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.020533] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.020598] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.020605] software IO TLB: area num 8. [ 0.044326] Memory: 3396044K/8312348K available (14342K kernel code, 2331K rwdata, 9048K rodata, 2792K init, 17416K bss, 560952K reserved, 0K cma-reserved) [ 0.044441] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.044452] Kernel/User page tables isolation: enabled [ 0.044479] ftrace: allocating 40157 entries in 157 pages [ 0.050094] ftrace: allocated 157 pages with 5 groups [ 0.050596] Dynamic Preempt: voluntary [ 0.050623] rcu: Preemptible hierarchical RCU implementation. [ 0.050623] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.050625] Trampoline variant of Tasks RCU enabled. [ 0.050625] Rude variant of Tasks RCU enabled. [ 0.050625] Tracing variant of Tasks RCU enabled. [ 0.050626] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.050626] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.053889] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.054064] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.054119] Console: colour dummy device 80x25 [ 0.054134] printk: console [tty0] enabled [ 0.054147] ACPI: Core revision 20220331 [ 0.054230] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.054242] APIC: Switch to symmetric I/O mode setup [ 0.054244] DMAR: Host address width 39 [ 0.054245] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.054249] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.054250] DMAR: RMRR base: 0x000000dee90000 end: 0x000000dee9ffff [ 0.054253] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.054254] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.054255] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.054548] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.054550] x2apic enabled [ 0.054555] Switched APIC routing to cluster x2apic. [ 0.054967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074248] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c5c6a8b57, max_idle_ns: 440795354962 ns [ 0.074252] Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.44 BogoMIPS (lpj=14366884) [ 0.074272] CPU0: Thermal monitoring enabled (TM1) [ 0.074295] process: using mwait in idle threads [ 0.074297] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.074298] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.074300] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.074302] Spectre V2 : Mitigation: Retpolines [ 0.074302] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.074303] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.074303] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.074304] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.074305] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.074306] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.074308] MDS: Mitigation: Clear CPU buffers [ 0.074309] MMIO Stale Data: Unknown: No mitigations [ 0.074310] SRBDS: Mitigation: Microcode [ 0.074314] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.074315] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.074316] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.074317] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.074318] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.084301] Freeing SMP alternatives memory: 36K [ 0.084303] pid_max: default: 32768 minimum: 301 [ 0.089619] LSM: Security Framework initializing [ 0.089630] landlock: Up and running. [ 0.089630] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.089647] AppArmor: AppArmor initialized [ 0.089648] TOMOYO Linux initialized [ 0.089653] LSM support for eBPF active [ 0.089672] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.089680] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.090068] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.090148] cblist_init_generic: Setting adjustable number of callback queues. [ 0.090149] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.090160] cblist_init_generic: Setting adjustable number of callback queues. [ 0.090160] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.090169] cblist_init_generic: Setting adjustable number of callback queues. [ 0.090170] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.090178] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.090208] ... version: 3 [ 0.090209] ... bit width: 48 [ 0.090209] ... generic registers: 4 [ 0.090210] ... value mask: 0000ffffffffffff [ 0.090211] ... max period: 00007fffffffffff [ 0.090211] ... fixed-purpose events: 3 [ 0.090212] ... event mask: 000000070000000f [ 0.090249] signal: max sigframe size: 1776 [ 0.090249] Estimated ratio of average max frequency by base frequency (times 1024): 1080 [ 0.090249] rcu: Hierarchical SRCU implementation. [ 0.090249] rcu: Max phase no-delay instances is 1000. [ 0.090249] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.090249] smp: Bringing up secondary CPUs ... [ 0.090249] x86: Booting SMP configuration: [ 0.090249] .... node #0, CPUs: #1 #2 #3 #4 [ 0.091767] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.091767] #5 #6 #7 [ 0.094670] smp: Brought up 1 node, 8 CPUs [ 0.094670] smpboot: Max logical packages: 1 [ 0.094670] smpboot: Total of 8 processors activated (57467.53 BogoMIPS) [ 0.102278] node 0 deferred pages initialised in 8ms [ 0.104793] devtmpfs: initialized [ 0.104793] x86/mm: Memory block size: 128MB [ 0.104793] ACPI: PM: Registering ACPI NVS region [mem 0xcbb70000-0xcbb76fff] (28672 bytes) [ 0.104793] ACPI: PM: Registering ACPI NVS region [mem 0xdd90f000-0xde369fff] (10858496 bytes) [ 0.104793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.104793] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.104793] pinctrl core: initialized pinctrl subsystem [ 0.106466] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.106581] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.106642] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.106701] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.106712] thermal_sys: Registered thermal governor 'fair_share' [ 0.106712] thermal_sys: Registered thermal governor 'bang_bang' [ 0.106712] thermal_sys: Registered thermal governor 'step_wise' [ 0.106712] thermal_sys: Registered thermal governor 'user_space' [ 0.106712] thermal_sys: Registered thermal governor 'power_allocator' [ 0.106712] cpuidle: using governor ladder [ 0.106712] cpuidle: using governor menu [ 0.106712] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.106712] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.106712] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.106712] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.106712] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.106712] PCI: Using configuration type 1 for base access [ 0.106712] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.106712] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.106867] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.106871] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.106871] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.106871] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.106871] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.106871] ACPI: Added _OSI(Module Device) [ 0.106871] ACPI: Added _OSI(Processor Device) [ 0.106871] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.106871] ACPI: Added _OSI(Processor Aggregator Device) [ 0.115919] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.116925] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.117685] ACPI: Dynamic OEM Table Load: [ 0.117692] ACPI: SSDT 0xFFFF9C3040E4B400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.118343] ACPI: Dynamic OEM Table Load: [ 0.118348] ACPI: SSDT 0xFFFF9C3041134000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.119035] ACPI: Dynamic OEM Table Load: [ 0.119039] ACPI: SSDT 0xFFFF9C3041046E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.120953] ACPI: Interpreter enabled [ 0.120975] ACPI: PM: (supports S0 S3 S4 S5) [ 0.120976] ACPI: Using IOAPIC for interrupt routing [ 0.120997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.120999] PCI: Using E820 reservations for host bridge windows [ 0.121299] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.128837] ACPI: PM: Power Resource [FN00] ACPI: PM: Power Resource [FN01] ACPI: PM: Power Resource [FN02] ACPI: PM: Power Resource [FN03] ACPI: PM: Power Resource [FN04] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.128837] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.129466] PCI host bridge to bus 0000:00 [ 0.129468] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.129542] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.129571] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.129755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.129770] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.129899] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.129914] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.130020] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.130034] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.130168] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.130183] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.130327] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.130400] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.130419] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.130422] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.130582] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.130655] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.130673] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.130675] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.130841] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.130855] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.130996] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.131150] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.131161] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.131278] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.131292] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] pci 0000:01:00.0: [1002:6759] type 00 class 0x030000 [ 0.131406] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.131452] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.131555] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 0.131569] pci 0000:01:00.1: reg 0x10: [mem 0xf7e40000-0xf7e43fff 64bit] pci 0000:01:00.1: supports D1 D2 [ 0.131695] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.131975] pci 0000:03:00.0: reg 0x10: [io 0xd300-0xd3ff] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] pci 0000:03:00.0: supports D1 D2 [ 0.132451] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132777] pci 0000:03:00.1: [10ec:816a] type 00 class 0x070002 [ 0.132858] pci 0000:03:00.1: reg 0x10: [io 0xd200-0xd2ff] pci 0000:03:00.1: reg 0x18: [mem 0xf7d0e000-0xf7d0efff 64bit] pci 0000:03:00.1: reg 0x20: [mem 0xf7d08000-0xf7d0bfff 64bit] pci 0000:03:00.1: supports D1 D2 [ 0.133150] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133380] pci 0000:03:00.2: [10ec:816b] type 00 class 0x070002 [ 0.133439] pci 0000:03:00.2: reg 0x10: [io 0xd100-0xd1ff] pci 0000:03:00.2: reg 0x18: [mem 0xf7d0d000-0xf7d0dfff 64bit] pci 0000:03:00.2: reg 0x20: [mem 0xf7d04000-0xf7d07fff 64bit] pci 0000:03:00.2: supports D1 D2 [ 0.133827] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134036] pci 0000:03:00.3: [10ec:816c] type 00 class 0x0c0701 [ 0.134094] pci 0000:03:00.3: reg 0x10: [io 0xd000-0xd0ff] pci 0000:03:00.3: reg 0x18: [mem 0xf7d0c000-0xf7d0c0ff 64bit] pci 0000:03:00.3: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit] pci 0000:03:00.3: supports D1 D2 [ 0.134560] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134872] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.135684] ACPI: PCI: Interrupt link LNKB configured for IRQ 5 [ 0.135720] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.135752] ACPI: PCI: Interrupt link LNKD configured for IRQ 6 [ 0.135788] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.135789] ACPI: PCI: Interrupt link LNKE disabled [ 0.135824] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.135860] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 [ 0.135896] ACPI: PCI: Interrupt link LNKH configured for IRQ 6 [ 0.138264] iommu: Default domain type: Translated [ 0.138264] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.138301] pps_core: LinuxPPS API ver. 1 registered [ 0.138302] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.138304] PTP clock support registered [ 0.138311] EDAC MC: Ver: 3.0.0 [ 0.138407] Registered efivars operations [ 0.138407] NetLabel: Initializing [ 0.138407] NetLabel: domain hash size = 128 [ 0.138407] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.138407] NetLabel: unlabeled traffic allowed by default [ 0.138407] PCI: Using ACPI for IRQ routing [ 0.139578] PCI: pci_cache_line_size set to 64 bytes [ 0.139675] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x13a8e000-0x13ffffff] e820: reserve RAM buffer [mem 0xcbb70000-0xcbffffff] e820: reserve RAM buffer [mem 0xcc41a000-0xcfffffff] e820: reserve RAM buffer [mem 0xdd888000-0xdfffffff] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.139691] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.139691] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.139691] vgaarb: loaded [ 0.139691] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.139691] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.142265] clocksource: Switched to clocksource tsc-early [ 0.142265] VFS: Disk quotas dquot_6.6.0 [ 0.142265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.142265] AppArmor: AppArmor Filesystem Enabled [ 0.142265] pnp: PnP ACPI init [ 0.142265] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.142265] system 00:00: [io 0xffff] has been reserved [ 0.142265] system 00:00: [io 0xffff] has been reserved [ 0.142265] system 00:00: [io 0xffff] has been reserved [ 0.142265] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.142265] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.142265] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.142265] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.142265] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.142265] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.142265] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.142265] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.142265] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.142265] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.142265] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.142265] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 0.142265] pnp 00:04: [dma 0 disabled] pnp 00:05: [dma 0 disabled] pnp 00:06: [dma 0 disabled] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.143910] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143912] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.143913] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.143914] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.143916] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.143917] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.143918] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.143920] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.143921] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.143922] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.143923] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.143925] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.144094] pnp: PnP ACPI: found 10 devices [ 0.149463] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.149507] NET: Registered PF_INET protocol family [ 0.149580] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.150832] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.150852] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.150880] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.151024] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.151220] TCP: Hash tables configured (established 65536 bind 65536) [ 0.151269] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.151300] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.151319] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.151350] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.151356] NET: Registered PF_XDP protocol family [ 0.151362] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.151365] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.151367] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.151373] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0100000-0xf02fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0300000-0xf04fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf02fffff] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf04fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf02fffff] pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.151896] PCI: CLS 64 bytes, default 64 [ 0.151906] DMAR: No ATSR found [ 0.151906] DMAR: No SATC found [ 0.151908] DMAR: dmar0: Using Queued invalidation [ 0.151936] Trying to unpack rootfs image as initramfs... [ 0.151941] pci 0000:00:00.0: Adding to iommu group 0 [ 0.151950] pci 0000:00:01.0: Adding to iommu group 1 [ 0.151956] pci 0000:00:14.0: Adding to iommu group 2 [ 0.151963] pci 0000:00:16.0: Adding to iommu group 3 [ 0.151969] pci 0000:00:1a.0: Adding to iommu group 4 [ 0.151975] pci 0000:00:1b.0: Adding to iommu group 5 [ 0.151984] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.151990] pci 0000:00:1c.2: Adding to iommu group 7 [ 0.151996] pci 0000:00:1d.0: Adding to iommu group 8 [ 0.152007] pci 0000:00:1f.0: Adding to iommu group 9 [ 0.152013] pci 0000:00:1f.2: Adding to iommu group 9 [ 0.152019] pci 0000:00:1f.3: Adding to iommu group 9 [ 0.152022] pci 0000:01:00.0: Adding to iommu group 1 [ 0.152025] pci 0000:01:00.1: Adding to iommu group 1 [ 0.152036] pci 0000:03:00.0: Adding to iommu group 10 [ 0.152043] pci 0000:03:00.1: Adding to iommu group 10 [ 0.152048] pci 0000:03:00.2: Adding to iommu group 10 [ 0.152055] pci 0000:03:00.3: Adding to iommu group 10 [ 0.152726] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.152727] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.152728] software IO TLB: mapped [mem 0x00000000d9888000-0x00000000dd888000] (64MB) [ 0.153155] Initialise system trusted keyrings [ 0.153168] Key type blacklist registered [ 0.153210] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.154744] zbud: loaded [ 0.154939] integrity: Platform Keyring initialized [ 0.154943] integrity: Machine keyring initialized [ 0.154945] Key type asymmetric registered [ 0.154946] Asymmetric key parser 'x509' registered [ 0.512051] Freeing initrd memory: 78020K [ 0.515526] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.515546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.515572] io scheduler mq-deadline registered [ 0.516300] pcieport 0000:00:01.0: PME: Signaling with IRQ 25 [ 0.516444] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.516472] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.516672] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27 [ 0.516748] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.517462] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517464] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.517596] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.517598] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.517681] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.517682] ACPI: thermal: Thermal Zone [THRM] (30 C) [ 0.517803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.517974] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.518427] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.519236] 0000:03:00.1: ttyS2 at I/O 0xd200 (irq = 19, base_baud = 115200) is a 16550A [ 0.519681] 0000:03:00.2: ttyS3 at I/O 0xd100 (irq = 16, base_baud = 115200) is a 16550A [ 0.519875] Linux agpgart interface v0.103 [ 0.521239] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 71) [ 0.530340] tpm tpm0: TPM is disabled/deactivated (0x7) [ 0.532418] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.533093] i8042: PNP: No PS/2 controller found. [ 0.533171] mousedev: PS/2 mouse device common for all mice [ 0.533188] rtc_cmos 00:01: RTC can wake from S4 [ 0.533412] rtc_cmos 00:01: registered as rtc0 [ 0.533446] rtc_cmos 00:01: setting system clock to 2023-12-11T18:42:53 UTC (1702320173) [ 0.533468] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.533634] intel_pstate: Intel P-state driver initializing [ 0.533994] ledtrig-cpu: registered to indicate activity on CPUs [ 0.534220] efifb: probing for efifb [ 0.534229] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.534231] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.534232] efifb: scrolling: redraw [ 0.534232] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.534301] Console: switching to colour frame buffer device 128x48 [ 0.536283] fb0: EFI VGA frame buffer device [ 0.544920] NET: Registered PF_INET6 protocol family [ 0.548897] Segment Routing with IPv6 [ 0.548907] In-situ OAM (IOAM) with IPv6 [ 0.548923] mip6: Mobile IPv6 [ 0.548927] NET: Registered PF_PACKET protocol family [ 0.549012] mpls_gso: MPLS GSO support [ 0.549438] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.549473] microcode: Microcode Update Driver: v2.2. [ 0.549479] IPI shorthand broadcast: enabled [ 0.549497] sched_clock: Marking stable (549223174, 153700)->(554491944, -5115070) [ 0.549706] registered taskstats version 1 [ 0.549712] Loading compiled-in X.509 certificates [ 0.563266] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.563276] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.563772] zswap: loaded using pool lzo/zbud [ 0.564015] Key type .fscrypt registered [ 0.564016] Key type fscrypt-provisioning registered [ 0.567286] Key type encrypted registered [ 0.567288] AppArmor: AppArmor sha1 policy hashing enabled [ 0.567659] integrity: Loading X.509 certificate: UEFI:db [ 0.567681] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.567682] integrity: Loading X.509 certificate: UEFI:db [ 0.567695] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.567696] integrity: Loading X.509 certificate: UEFI:db [ 0.567706] integrity: Loaded X.509 cert 'Acer: c4f0474ae6b5e67a509d99132f49a4ec13f7ac68' [ 0.567855] ima: Allocated hash algorithm: sha256 [ 0.569290] ima: Error Communicating to TPM chip [ 0.570989] ima: Error Communicating to TPM chip [ 0.572664] ima: Error Communicating to TPM chip [ 0.574361] ima: Error Communicating to TPM chip [ 0.576040] ima: Error Communicating to TPM chip [ 0.577742] ima: Error Communicating to TPM chip [ 0.579451] ima: Error Communicating to TPM chip [ 0.581164] ima: Error Communicating to TPM chip [ 0.584006] ima: No architecture policies found [ 0.584028] evm: Initialising EVM extended attributes: [ 0.584029] evm: security.selinux [ 0.584030] evm: security.SMACK64 (disabled) [ 0.584031] evm: security.SMACK64EXEC (disabled) [ 0.584031] evm: security.SMACK64TRANSMUTE (disabled) [ 0.584032] evm: security.SMACK64MMAP (disabled) [ 0.584032] evm: security.apparmor [ 0.584033] evm: security.ima [ 0.584033] evm: security.capability [ 0.584034] evm: HMAC attrs: 0x1 [ 0.654571] Freeing unused decrypted memory: 2036K [ 0.654885] Freeing unused kernel image (initmem) memory: 2792K [ 0.668257] Write protecting the kernel read-only data: 26624k [ 0.668659] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 0.668819] Freeing unused kernel image (rodata/data gap) memory: 1192K [ 0.702075] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.702076] x86/mm: Checking user space page tables [ 0.733342] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.733349] Run /init as init process [ 0.733350] with arguments: [ 0.733351] /init [ 0.733351] splash [ 0.733352] with environment: [ 0.733352] HOME=/ [ 0.733353] TERM=linux [ 0.733353] BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-amd64 [ 0.820256] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.829902] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ 0.829910] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.829918] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.829922] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.829923] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 0.829927] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.829930] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.829931] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 0.829934] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 0.829938] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.829938] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.832963] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.832997] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.833546] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 0.841977] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.845003] ACPI: button: Power Button [PWRB] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.846343] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 0.846734] SCSI subsystem initialized [ 0.846757] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.847034] ACPI: bus type USB registered [ 0.847315] usbcore: registered new interface driver usbfs [ 0.847410] usbcore: registered new interface driver hub [ 0.847428] usbcore: registered new device driver usb [ 0.848451] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.859628] ACPI: bus type drm_connector registered [ 0.860195] ACPI: button: Power Button [PWRF] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.867027] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.867044] ehci-pci 0000:00:1a.0: debug port 2 [ 0.870902] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.871014] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000 [ 0.871816] libata version 3.00 loaded. [ 0.872036] cryptd: max_cpu_qlen set to 1000 [ 0.875492] r8169 0000:03:00.0 eth0: RTL8168dp/8111dp, 1CF9128047FA927CFA9F00240BC7831A, XID 28b, IRQ 28 [ 0.875497] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] r8169 0000:03:00.0 eth0: DASH enabled [ 0.875660] ahci 0000:00:1f.2: version 3.0 [ 0.875849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.875853] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.884182] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.884327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.884331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.884332] usb usb1: Product: EHCI Host Controller [ 0.884334] usb usb1: Manufacturer: Linux 6.1.0-15-amd64 ehci_hcd [ 0.884335] usb usb1: SerialNumber: ... [ 0.884476] hub 1-0:1.0: USB hub found [ 0.884486] hub 1-0:1.0: 2 ports detected [ 0.884693] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.884700] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.885799] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.885940] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.885946] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.885966] ehci-pci 0000:00:1d.0: debug port 2 [ 0.885993] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.885996] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.885998] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.886184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.886187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.886188] usb usb2: Product: xHCI Host Controller [ 0.886189] usb usb2: Manufacturer: Linux 6.1.0-15-amd64 xhci-hcd [ 0.886190] usb usb2: SerialNumber: ... [ 0.886361] hub 2-0:1.0: USB hub found [ 0.886384] hub 2-0:1.0: 12 ports detected [ 0.888085] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.888087] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.888088] usb usb4: Product: xHCI Host Controller [ 0.888088] usb usb4: Manufacturer: Linux 6.1.0-15-amd64 xhci-hcd [ 0.888089] usb usb4: SerialNumber: ... [ 0.888165] hub 4-0:1.0: USB hub found [ 0.888181] hub 4-0:1.0: 6 ports detected [ 0.889904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000 [ 0.896644] scsi host0: ahci [ 0.896743] scsi host1: ahci [ 0.896860] scsi host2: ahci [ 0.896953] scsi host3: ahci [ 0.897036] scsi host4: ahci [ 0.897116] scsi host5: ahci [ 0.897151] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 29 [ 0.897154] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 29 [ 0.897155] ata3: DUMMY [ 0.897156] ata4: DUMMY [ 0.897158] ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 29 [ 0.897159] ata6: DUMMY [ 0.908181] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.908212] r8169 0000:03:00.0 enp3s0f0: renamed from eth0 [ 0.908278] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.908282] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.908294] usb usb3: Product: EHCI Host Controller [ 0.908295] usb usb3: Manufacturer: Linux 6.1.0-15-amd64 ehci_hcd [ 0.908296] usb usb3: SerialNumber: ... [ 0.908500] hub 3-0:1.0: USB hub found [ 0.908530] hub 3-0:1.0: 2 ports detected [ 0.947693] [drm] radeon kernel modesetting enabled. [ 0.947813] Console: switching to colour dummy device 80x25 [ 0.947861] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 0.948037] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759 0x103C:0x3130 0x00). [ 0.948071] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000e7fff window] caller pci_map_rom+0x65/0x180 mapping multiple BARs [ 0.948095] ATOM BIOS: Bobafet [ 0.948250] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 0.948252] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 0.948256] [drm] Detected VRAM RAM=1024M, BAR=256M [ 0.948256] [drm] RAM width 128bits DDR [ 0.948273] [drm] radeon: 1024M of VRAM memory ready [ 0.948273] [drm] radeon: 1024M of GTT memory ready. [ 0.948277] [drm] Loading TURKS Microcode [ 0.948295] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_pfp.bin [ 0.948305] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_me.bin [ 0.948312] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin [ 0.948325] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_mc.bin [ 0.948337] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_smc.bin [ 0.948339] [drm] Internal thermal controller with fan control [ 0.952588] [drm] radeon: dpm initialized [ 0.952630] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin [ 0.952651] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 0.953017] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 0.965050] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 0.965152] radeon 0000:01:00.0: WB enabled [ 0.965153] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 0.965154] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 0.965898] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 [ 0.966440] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 0.966509] radeon 0000:01:00.0: radeon: using MSI. [ 0.966533] [drm] radeon: irq initialized. [ 0.982955] [drm] ring test on 0 succeeded in 3 usecs [ 0.982968] [drm] ring test on 3 succeeded in 8 usecs [ 1.140163] usb 2-6: new low-speed USB device number 2 using xhci_hcd [ 1.144175] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.158909] [drm] ring test on 5 succeeded in 2 usecs [ 1.158918] [drm] UVD initialized successfully. [ 1.159085] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.159176] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.164174] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.172174] tsc: Refined TSC clocksource calibration: 3591.691 MHz [ 1.172178] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a9ddad2, max_idle_ns: 440795219320 ns [ 1.309185] clocksource: Switched to clocksource tsc [ 1.309277] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.309375] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.309452] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.309454] [drm] ib test on ring 5 succeeded [ 1.309769] [drm] Radeon Display Connectors [ 1.309770] [drm] Connector 0: [ 1.309770] [drm] DP-1 [ 1.309771] [drm] HPD4 [ 1.309771] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 1.309772] [drm] Encoders: [ 1.309773] [drm] DFP1: INTERNAL_UNIPHY2 [ 1.309773] [drm] Connector 1: [ 1.309774] [drm] DP-2 [ 1.309774] [drm] HPD5 [ 1.309774] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 1.309775] [drm] Encoders: [ 1.309776] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.309776] [drm] Connector 2: [ 1.309776] [drm] DVI-I-1 [ 1.309777] [drm] HPD1 [ 1.309777] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 1.309778] [drm] Encoders: [ 1.309778] [drm] DFP3: INTERNAL_UNIPHY [ 1.309779] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.310002] ata2.00: ATA-11: WDC WDS100T2B0A-00SM50, 415020WD, max UDMA/133 [ 1.310532] ata1.00: ATAPI: HL-DT-ST DVDRAM GHD0N, 1.00, max UDMA/133 [ 1.310538] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.310921] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.310935] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.311961] ata5.00: ATA-8: ST31000524AS, HP63, max UDMA/100 [ 1.311963] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.312005] ata1.00: configured for UDMA/133 [ 1.312028] ata2.00: Features: Dev-Sleep [ 1.313418] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GHD0N 1.00 PQ: 0 ANSI: 5 [ 1.313553] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.313556] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.314574] ata5.00: configured for UDMA/100 [ 1.315291] ata2.00: configured for UDMA/133 [ 1.380872] scsi 1:0:0:0: Direct-Access ATA WDC WDS100T2B0A 20WD PQ: 0 ANSI: 5 [ 1.381364] scsi 4:0:0:0: Direct-Access ATA ST31000524AS HP63 PQ: 0 ANSI: 5 [ 1.395916] usb 2-6: New USB device found, idVendor=03f0, idProduct=304a, bcdDevice= 0.10 [ 1.395919] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.395920] usb 2-6: Product: HP Business Slim Keyboard [ 1.395921] usb 2-6: Manufacturer: Chicony [ 1.396587] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.396602] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.396609] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.396622] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.396856] hub 3-1:1.0: USB hub found [ 1.396869] hub 1-1:1.0: USB hub found [ 1.396935] hub 3-1:1.0: 6 ports detected [ 1.396955] hub 1-1:1.0: 6 ports detected [ 1.402506] hid: raw HID events driver (C) Jiri Kosina [ 1.412561] usbcore: registered new interface driver usbhid [ 1.412582] usbhid: USB HID core driver [ 1.415602] [drm] fb mappable at 0xE0363000 [ 1.415605] [drm] vram apper at 0xE0000000 [ 1.415606] [drm] size 8294400 [ 1.415607] [drm] fb depth is 24 [ 1.415607] [drm] pitch is 7680 [ 1.415703] fbcon: radeondrmfb (fb0) is primary device [ 1.416311] input: Chicony HP Business Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:03F0:304A.0001/input/input2 [ 1.463095] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.463099] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.464390] Console: switching to colour frame buffer device 240x67 [ 1.469760] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 1.476334] hid-generic 0003:03F0:304A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Business Slim Keyboard] on usb-0000:00:14.0-6/input0 [ 1.476563] input: Chicony HP Business Slim Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1/0003:03F0:304A.0002/input/input3 [ 1.484335] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 1.524180] usb 2-7: new high-speed USB device number 3 using xhci_hcd [ 1.536255] input: Chicony HP Business Slim Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1/0003:03F0:304A.0002/input/input4 [ 1.536283] input: Chicony HP Business Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1/0003:03F0:304A.0002/input/input5 [ 1.536480] hid-generic 0003:03F0:304A.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony HP Business Slim Keyboard] on usb-0000:00:14.0-6/input1 [ 1.540753] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.540928] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.540929] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.540942] sd 1:0:0:0: [sda] Write Protect is off [ 1.540944] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.540945] sd 4:0:0:0: [sdb] Write Protect is off [ 1.540948] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.540962] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.540979] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.540985] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.541006] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 1.542488] sda: sda1 sda2 sda3 [ 1.542660] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.550097] sdb: sdb1 sdb2 sdb3 [ 1.550235] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.684184] usb 3-1.4: new high-speed USB device number 3 using ehci-pci [ 1.745620] usb 2-7: New USB device found, idVendor=046d, idProduct=082b, bcdDevice=28.25 [ 1.745632] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.745633] usb 2-7: Product: Webcam C170 [ 1.745634] usb 2-7: Manufacturer: [ 1.800573] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0184, bcdDevice=84.13 [ 1.800576] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.800577] usb 3-1.4: Product: USB2.0-CRW [ 1.800578] usb 3-1.4: Manufacturer: Generic [ 1.800579] usb 3-1.4: SerialNumber: ... [ 1.876185] usb 2-8: new low-speed USB device number 4 using xhci_hcd [ 2.027252] usb 2-8: New USB device found, idVendor=04b3, idProduct=310c, bcdDevice= 2.00 [ 2.027255] usb 2-8: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2.027256] usb 2-8: Product: USB Optical Mouse [ 2.029749] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04B3:310C.0003/input/input6 [ 2.029805] hid-generic 0003:04B3:310C.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-8/input0 [ 2.545871] usbcore: registered new interface driver usb-storage [ 2.546986] usbcore: registered new interface driver uas [ 2.547684] ums-realtek 3-1.4:1.0: USB Mass Storage device detected [ 2.550634] [drm] amdgpu kernel modesetting enabled. [ 2.550750] amdgpu: CRAT table not found [ 2.550752] amdgpu: Virtual CRAT table created for CPU [ 2.550771] amdgpu: Topology: Add CPU node [ 2.554967] scsi host6: usb-storage 3-1.4:1.0 [ 2.555020] usbcore: registered new interface driver ums-realtek [ 2.921313] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 2.921341] device-mapper: uevent: version 1.0.3 [ 2.921457] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 3.108177] raid6: avx2x4 gen() 38442 MB/s [ 3.176176] raid6: avx2x2 gen() 38133 MB/s [ 3.244177] raid6: avx2x1 gen() 35473 MB/s [ 3.244178] raid6: using algorithm avx2x4 gen() 38442 MB/s [ 3.312176] raid6: .... xor() 12819 MB/s, rmw enabled [ 3.312177] raid6: using avx2x2 recovery algorithm [ 3.312822] xor: automatically using best checksumming function avx [ 3.391028] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 3.574582] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 3.576501] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 3.578497] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 3.580621] scsi 6:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS [ 3.582620] scsi 6:0:0:4: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 3.584814] sd 6:0:0:0: [sdc] Media removed, stopped polling [ 3.584977] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 3.586689] sd 6:0:0:1: [sdd] Media removed, stopped polling [ 3.586827] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 3.588730] sd 6:0:0:2: [sde] Media removed, stopped polling [ 3.588892] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 3.592710] sd 6:0:0:3: [sdf] Media removed, stopped polling [ 3.592881] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 3.594821] sd 6:0:0:4: [sdg] Media removed, stopped polling [ 3.594975] sd 6:0:0:4: [sdg] Attached SCSI removable disk [ 3.763840] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.823156] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 4.291422] pstore: Using crash dump compression: deflate [ 4.295957] loop: module loaded [ 4.298274] pstore: Registered efi as persistent store backend [ 4.299700] fuse: init (API version 7.37) [ 4.301346] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 4.309930] lp: driver loaded but no devices found [ 4.313099] ppdev: user-space parallel port driver [ 4.316649] parport_pc 00:06: reported by Plug and Play ACPI [ 4.316780] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). [ 4.469915] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.469947] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.476671] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.484376] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4.488659] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 4.493561] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 4.498373] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 4.498686] sd 6:0:0:4: Attached scsi generic sg7 type 0 [ 4.592279] IPMI message handler: version 39.2 [ 4.592844] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 4.593215] iTCO_vendor_support: vendor-support=0 [ 4.593394] at24 0-0050: supply vcc not found, using dummy regulator [ 4.596127] at24 0-0050: 256 byte spd EEPROM, read-only [ 4.596192] mc: Linux media interface: v0.10 [ 4.596265] at24 0-0051: supply vcc not found, using dummy regulator [ 4.596592] ipmi device interface [ 4.597781] at24 0-0051: 256 byte spd EEPROM, read-only [ 4.598209] at24 0-0052: supply vcc not found, using dummy regulator [ 4.600223] at24 0-0052: 256 byte spd EEPROM, read-only [ 4.600307] at24 0-0053: supply vcc not found, using dummy regulator [ 4.600461] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 4.602173] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 4.603288] at24 0-0053: 256 byte spd EEPROM, read-only [ 4.603426] ipmi_si: IPMI System Interface driver [ 4.603481] ipmi_si: Unable to find any System Interface(s) [ 4.613803] videodev: Linux video capture interface: v2.00 [ 4.622629] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 4.622633] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.622634] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.622635] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.681839] usb 2-7: Found UVC 1.00 device Webcam C170 (046d:082b) [ 4.702243] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input8 [ 4.702298] usbcore: registered new interface driver uvcvideo [ 4.760848] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 4.768239] usbcore: registered new interface driver snd-usb-audio [ 4.780315] snd_hda_codec_realtek hdaudioC1D0: ALC662 rev3: SKU not ready 0x411111f0 [ 4.780750] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.780753] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 4.780754] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.780756] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.780756] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.780757] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 4.780758] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 4.780759] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 4.781702] intel_rapl_common: Found RAPL domain package [ 4.781704] intel_rapl_common: Found RAPL domain core [ 4.781705] intel_rapl_common: Found RAPL domain dram [ 4.781709] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 4.781712] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 4.791814] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 4.791850] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 4.791883] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 4.791914] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 4.791946] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 4.791976] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 5.334034] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ 5.334995] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.696735] NET: Registered PF_QIPCRTR protocol family [ 5.727788] RTL8211B Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 5.790683] r8169 0000:03:00.0 enp3s0f0: Link is Down [ 7.512366] usb 2-7: reset high-speed USB device number 3 using xhci_hcd [ 7.607388] r8169 0000:03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 7.607398] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready [ 157.167502] usb 2-5: new high-speed USB device number 5 using xhci_hcd [ 157.316234] usb 2-5: New USB device found, idVendor=03f0, idProduct=e511, bcdDevice= 1.00 [ 157.316254] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 157.316264] usb 2-5: Product: OfficeJet 3830 series [ 157.316271] usb 2-5: Manufacturer: HP [ 157.316276] usb 2-5: SerialNumber: ... [ 157.483934] usblp 2-5:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE511 [ 157.483964] usbcore: registered new interface driver usblp [ 157.533378] usblp1: removed [ 162.920004] usb 2-5: reset high-speed USB device number 5 using xhci_hcd [ 163.073188] usblp 2-5:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE511 [ 165.533932] usblp1: removed [ 2645.331152] Did not find alt setting 2 for intf 0, config 1 [ 2675.346742] Did not find alt setting 2 for intf 0, config 1 [ 2705.352893] Did not find alt setting 2 for intf 0, config 1 [ 2735.359917] Did not find alt setting 2 for intf 0, config 1 [ 2765.383795] Did not find alt setting 2 for intf 0, config 1 [ 2795.392740] Did not find alt setting 2 for intf 0, config 1 [ 2825.415521] Did not find alt setting 2 for intf 0, config 1 [ 2855.422518] Did not find alt setting 2 for intf 0, config 1 [ 2885.430971] Did not find alt setting 2 for intf 0, config 1 [ 2915.443713] Did not find alt setting 2 for intf 0, config 1 [ 2945.452742] Did not find alt setting 2 for intf 0, config 1 [ 2975.469941] Did not find alt setting 2 for intf 0, config 1 [ 3005.478694] Did not find alt setting 2 for intf 0, config 1 [ 3035.484652] Did not find alt setting 2 for intf 0, config 1 [ 3065.490540] Did not find alt setting 2 for intf 0, config 1 [ 3095.496489] Did not find alt setting 2 for intf 0, config 1 [ 3101.853620] usb 2-5: USB disconnect, device number 5 [ 4333.736538] EXT4-fs (sda3): unmounting filesystem.