[ 1.226067] device-mapper: uevent: version 1.0.3 [ 1.226117] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 1.242015] xor: automatically using best checksumming function avx [ 1.262007] raid6: avx2x4 gen() 18887 MB/s [ 1.279005] raid6: avx2x2 gen() 20603 MB/s [ 1.296005] raid6: avx2x1 gen() 18968 MB/s [ 1.296022] raid6: using algorithm avx2x2 gen() 20603 MB/s [ 1.313006] raid6: .... xor() 12936 MB/s, rmw enabled [ 1.313024] raid6: using avx2x2 recovery algorithm [ 1.392014] Btrfs loaded, zoned=yes, fsverity=yes [ 1.413014] ACPI: bus type USB registered [ 1.413052] usbcore: registered new interface driver usbfs [ 1.413061] usbcore: registered new interface driver hub [ 1.413070] usbcore: registered new device driver usb [ 1.574010] tsc: Refined TSC clocksource calibration: 1895.997 MHz [ 1.574047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8cd570f7, max_idle_ns: 881590638222 ns [ 1.574058] clocksource: Switched to clocksource tsc [ 1.636020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 1.636060] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 [ 1.636080] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 [ 1.636103] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 1.642019] ACPI: button: Power Button [PWRF] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.670469] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.670608] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.670719] intel-lpss 0000:00:15.0: Failed to create debugfs entries [ 1.670824] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.671300] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 1.671472] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.671651] intel-lpss 0000:00:15.1: Failed to create debugfs entries [ 1.671774] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.671868] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_7D1-911A-5F14-78EF-632E1637A197 has zero instances [ 1.672412] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_362-801B-1C3D-2638-F8882CF5E53F has zero instances [ 1.672571] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.672697] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.672811] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.672928] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.673329] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.673663] usb usb1: Product: xHCI Host Controller [ 1.674498] usb usb1: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 1.674621] usb usb1: SerialNumber: ... [ 1.675407] wmi_bus wmi_bus-PNP0C14:02: [Firmware Bug]: WQZZ data block query control method not found [ 1.675537] hub 1-0:1.0: USB hub found [ 1.675687] hub 1-0:1.0: 12 ports detected [ 1.675835] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 1.676041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.676149] usb usb2: Product: xHCI Host Controller [ 1.676251] usb usb2: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 1.676669] usb usb2: SerialNumber: ... [ 1.676859] hub 2-0:1.0: USB hub found [ 1.677143] hub 2-0:1.0: 6 ports detected [ 1.677320] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 1.701891] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 1.702015] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 1.702112] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 1.702203] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 1.702293] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.702394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.702510] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.702615] usb usb3: Product: xHCI Host Controller [ 1.702706] usb usb3: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 1.702797] usb usb3: SerialNumber: ... [ 1.702886] hub 3-0:1.0: USB hub found [ 1.702998] hub 3-0:1.0: 2 ports detected [ 1.703111] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 1.703213] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.703303] usb usb4: Product: xHCI Host Controller [ 1.703391] usb usb4: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 1.703480] usb usb4: SerialNumber: ... [ 1.703568] ACPI: battery: Slot [BAT0] (battery present) [ 1.703578] hub 4-0:1.0: USB hub found [ 1.711362] ACPI: bus type drm_connector registered [ 1.711380] hub 4-0:1.0: 2 ports detected [ 1.712347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.717014] hid: raw HID events driver (C) Jiri Kosina [ 1.723033] Linux agpgart interface v0.103 [ 1.727044] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 1.743113] 0000:00:16.3: ttyS0 at I/O 0x3060 (irq = 19, base_baud = 115200) is a 16550A [ 1.743129] cryptd: max_cpu_qlen set to 1000 [ 1.754034] AVX2 version of gcm_enc/dec engaged. [ 1.754069] AES CTR mode by8 optimization enabled [ 1.763039] nvme nvme0: pci function 0000:3b:00.0 [ 1.770015] nvme nvme0: D3 entry latency set to 8 seconds [ 1.780029] nvme nvme0: 8/0/0 default/read/poll queues [ 1.784013] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 1.904026] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.004021] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.900851] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.900989] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.901112] usb 1-1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 3.901274] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.901418] usb 1-1: Product: USB2.0 HUB [ 3.901918] hub 1-1:1.0: USB hub found [ 3.902061] hub 1-1:1.0: 4 ports detected [ 3.902173] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 3.902344] usb 1-8: New USB device found, idVendor=06cb, idProduct=00b7, bcdDevice= 1.64 [ 3.902499] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.902651] usb 1-8: SerialNumber: ... [ 3.902794] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd [ 3.902957] usb 1-1.3: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.10 [ 3.903111] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.903252] usb 1-1.3: Product: 2.4G Receiver [ 3.903394] usb 1-1.3: Manufacturer: CX [ 3.903536] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] psmouse serio3: synaptics: Your touchpad (PNP: SYN3091 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 3.903815] usb 1-9: new high-speed USB device number 5 using xhci_hcd [ 3.903966] psmouse serio3: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00523/0x840300/0x12e800/0x500000, board id: 3352, fw id: 3170022 [ 3.904067] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11 [ 3.904079] usb 1-9: New USB device found, idVendor=04ca, idProduct=7095, bcdDevice= 0.05 [ 3.904218] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.904358] usb 1-9: Product: HP HD Camera [ 3.904497] usb 1-9: Manufacturer: DHLQLA19ICMCVB [ 3.904633] usb 1-10: new full-speed USB device number 6 using xhci_hcd [ 3.904785] usb 1-10: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 3.904929] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.905075] usbcore: registered new interface driver usbhid [ 3.905087] usbhid: USB HID core driver [ 3.905096] usbcore: registered new interface driver usbmouse [ 3.905105] usbcore: registered new interface driver usbkbd [ 3.905113] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:25A7:FA67.0001/input/input13 [ 3.905123] hid-generic 0003:25A7:FA67.0001: input,hidraw0: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:14.0-1.3/input0 [ 3.905235] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA67.0002/input/input14 [ 3.905246] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA67.0002/input/input15 [ 3.905255] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA67.0002/input/input16 [ 3.905265] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA67.0002/input/input17 [ 3.905274] hid-generic 0003:25A7:FA67.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:14.0-1.3/input1 [ 3.905380] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 [ 3.905390] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.905400] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19 [ 3.905409] fbcon: i915drmfb (fb0) is primary device [ 3.905418] Console: switching to colour frame buffer device 240x67 [ 3.905429] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.976024] EXT4-fs (nvme0n1p5): orphan cleanup on readonly fs [ 3.976069] EXT4-fs (nvme0n1p5): mounted filesystem HASH_78B-A34E-7D00-91A3-FE22B971E335 ro with ordered data mode. Quota mode: none. [ 5.994385] zram0: detected capacity change from 0 to 15977472 [ 6.014018] ACPI: AC: AC Adapter [AC] (on-line) [ 6.015012] input: Wireless hotkeys as /devices/virtual/input/input20 [ 6.023334] Consider using thermal netlink events interface [ 6.027027] tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22) [ 6.268595] thermal LNXTHERM:00: registered as thermal_zone1 [ 6.268704] ACPI: thermal: Thermal Zone [HEPZ] (30 C) [ 6.268715] thermal LNXTHERM:01: registered as thermal_zone3 [ 6.268792] ACPI: thermal: Thermal Zone [CPUZ] (50 C) [ 6.268807] thermal LNXTHERM:02: registered as thermal_zone5 [ 6.268875] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 6.268886] thermal LNXTHERM:03: registered as thermal_zone6 [ 6.268956] ACPI: thermal: Thermal Zone [EXTZ] (33 C) [ 6.268967] thermal LNXTHERM:04: registered as thermal_zone7 [ 6.269050] ACPI: thermal: Thermal Zone [LOCZ] (32 C) [ 6.269061] thermal LNXTHERM:05: registered as thermal_zone8 [ 6.269126] ACPI: thermal: Thermal Zone [BATZ] (29 C) [ 6.269134] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20240322/exoparg2-393) [ 6.269144] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20240322/psparse-531) [ 6.269151] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20240322/psparse-531) [ 6.269161] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20240322/exoparg2-393) [ 6.269167] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20240322/psparse-531) [ 6.269173] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20240322/psparse-531) [ 6.269181] ACPI: thermal: [Firmware Bug]: No valid trip points! [ 6.269189] thermal LNXTHERM:06: registered as thermal_zone9 [ 6.269261] ACPI: thermal: Thermal Zone [CHGZ] (37 C) [ 6.269271] thermal LNXTHERM:07: registered as thermal_zone10 [ 6.269333] ACPI: thermal: Thermal Zone [PCHZ] (0 C) [ 6.269343] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 6.269417] Adding 7988732k swap on /dev/zram0. Priority:100 extents:1 across:7988732k SSDsc [ 6.269425] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 6.269446] mc: Linux media interface: v0.10 [ 6.269454] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 6.269533] intel_rapl_common: Found RAPL domain package [ 6.269542] intel_rapl_common: Found RAPL domain dram [ 6.269550] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 6.269628] ACPI: bus type thunderbolt registered [ 6.269635] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 6.269709] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 6.269784] Bluetooth: Core ver 2.22 [ 6.269793] NET: Registered PF_BLUETOOTH protocol family [ 6.269801] Bluetooth: HCI device and connection manager initialized [ 6.269807] Bluetooth: HCI socket layer initialized [ 6.269816] Bluetooth: L2CAP socket layer initialized [ 6.269825] Bluetooth: SCO socket layer initialized [ 6.269833] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.269842] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.269851] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 6.269857] videodev: Linux video capture interface: v2.00 [ 6.269866] e1000e: Intel(R) PRO/1000 Network Driver [ 6.269873] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.269879] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 6.278095] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 6.278221] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-SYNA3091:00/0018:06CB:82F5.0003/input/input21 [ 6.278238] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-SYNA3091:00/0018:06CB:82F5.0003/input/input22 [ 6.278252] hid-generic 0018:06CB:82F5.0003: input,hidraw2: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 6.278426] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) D9F4FD5B37206F6E96AE11E420F3D309 [ 6.278548] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 6.278668] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 6.296299] hp_wmi: query 0x4 returned error 0x5 [ 6.305044] input: HP WMI hotkeys as /devices/virtual/input/input24 [ 6.318013] Intel(R) Wireless WiFi driver for Linux [ 6.318074] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002) [ 6.371301] usbcore: registered new interface driver btusb [ 6.371318] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 6.371332] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.371343] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.371356] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.371371] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.371387] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.371397] usb 1-9: Found UVC 1.00 device HP HD Camera (04ca:7095) [ 6.403153] usbcore: registered new interface driver uvcvideo [ 6.403169] iwlwifi 0000:3a:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000 [ 6.403686] iwlwifi 0000:3a:00.0: PCI dev 2723/0080, rev=0x340, rfid=0x10a100 [ 6.403887] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 6.403899] Bluetooth: hci0: Boot Address: 0x24800 [ 6.403914] Bluetooth: hci0: Firmware Version: 132-3.24 [ 6.403927] usb 1-10: USB disconnect, device number 6 [ 6.421504] Bluetooth: hci0: FW download error recovery failed (-19) [ 6.421526] Bluetooth: hci0: sending frame failed (-19) [ 6.421541] Bluetooth: hci0: Reading supported features failed (-19) [ 6.421551] Bluetooth: hci0: Error reading debug features [ 6.421564] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 6.421577] Bluetooth: hci0: sending frame failed (-19) [ 6.421588] Bluetooth: hci0: Failed to read MSFT supported features (-19) [ 6.421598] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 6.423192] iwlwifi 0000:3a:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 6.425691] iwlwifi 0000:3a:00.0: loaded firmware version 77.a20fb07d.0 cc-a0-77.ucode op_mode iwlmvm [ 6.425826] intel_tcc_cooling: Programmable TCC Offset detected [ 6.451634] intel_pmc_core intel_pmc_core.0: initialized [ 6.481012] intel_rapl_common: Found RAPL domain package [ 6.481040] intel_rapl_common: Found RAPL domain core [ 6.481072] intel_rapl_common: Found RAPL domain uncore [ 6.481089] intel_rapl_common: Found RAPL domain dram [ 6.481100] intel_rapl_common: Found RAPL domain psys [ 6.481112] iTCO_vendor_support: vendor-support=0 [ 6.487046] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 6.492369] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 6.492719] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.512012] iwlwifi 0000:3a:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 6.513016] Creating 1 MTD partitions on "0000:00:1f.5": [ 6.513052] 0x000000000000-0x000002000000 : "BIOS" [ 6.524010] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-SYNA3091:00/0018:06CB:82F5.0003/input/input25 [ 6.524063] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-SYNA3091:00/0018:06CB:82F5.0003/input/input26 [ 6.524090] hid-multitouch 0018:06CB:82F5.0003: input,hidraw2: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 6.564011] sof-audio-pci-intel-cnl 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.570230] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 6.570335] sof-audio-pci-intel-cnl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.571009] sof-audio-pci-intel-cnl 0000:00:1f.3: use msi interrupt mode [ 6.597014] sof-audio-pci-intel-cnl 0000:00:1f.3: hda codecs found, mask 5 [ 6.597166] sof-audio-pci-intel-cnl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 6.597259] sof-audio-pci-intel-cnl 0000:00:1f.3: DMICs detected in NHLT tables: 4 [ 6.599065] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware paths/files for ipc type 0: [ 6.599183] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware file: intel/sof/sof-cnl.ri [ 6.599266] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology file: intel/sof-tplg/sof-hda-generic-4ch.tplg [ 6.599352] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 6.599434] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 6.599515] sof-audio-pci-intel-cnl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 6.657060] iwlwifi 0000:3a:00.0: Detected RF HR B3, rfid=0x10a100 [ 6.708032] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 6.708265] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 6.721014] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 6.721155] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 7.410258] iwlwifi 0000:3a:00.0: base HW address: A679DC1B0DCCAC27DF01DA1289580802 [ 7.410520] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC215: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.410643] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.410732] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.410815] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 7.410936] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 7.411046] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 7.411149] iwlwifi 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 7.411271] usb 1-10: new full-speed USB device number 7 using xhci_hcd [ 7.411521] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.411534] usb 1-10: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 7.411688] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 7.411833] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 7.411869] Bluetooth: hci0: Device revision is 1 [ 7.411881] Bluetooth: hci0: Secure boot is enabled [ 7.411891] Bluetooth: hci0: OTP lock is enabled [ 7.411903] Bluetooth: hci0: API lock is enabled [ 7.411924] Bluetooth: hci0: Debug lock is disabled [ 7.411934] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 7.411944] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 7.411956] Bluetooth: hci0: Boot Address: 0x24800 [ 7.411977] Bluetooth: hci0: Firmware Version: 132-3.24 [ 7.411988] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.412014] Bluetooth: BNEP filters: protocol multicast [ 7.412032] Bluetooth: BNEP socket layer initialized [ 7.412043] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input28 [ 7.412056] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input29 [ 7.412078] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input30 [ 7.412090] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input31 [ 7.412100] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input32 [ 7.559010] iwlwifi 0000:3a:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 7.845010] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 7.845030] wireguard: Copyright (C) EEB1-A71F Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [ 7.888016] NET: Registered PF_PACKET protocol family [ 8.594057] Bluetooth: hci0: Waiting for firmware download to complete [ 8.595014] Bluetooth: hci0: Firmware loaded in 1624291 usecs [ 8.595045] Bluetooth: hci0: Waiting for device to boot [ 8.610014] Bluetooth: hci0: Device booted in 14467 usecs [ 8.610076] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 8.613009] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 8.615010] Bluetooth: hci0: Applying Intel DDC parameters completed [ 8.616009] Bluetooth: hci0: Firmware revision 0.3 build 132 week 3 2024 [ 8.618009] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 8.683052] Bluetooth: MGMT ver 1.22 [ 8.711021] Bluetooth: RFCOMM TTY layer initialized [ 8.711103] Bluetooth: RFCOMM socket layer initialized [ 8.711129] Bluetooth: RFCOMM ver 1.11 [ 430.845094] Non-volatile memory driver v1.3 [ 432.421026] SCSI subsystem initialized [ 432.433014] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 433.494145] warning: `hwinfo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 443.524183] usb 1-2: new high-speed USB device number 8 using xhci_hcd [ 443.651140] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00 [ 443.656482] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 443.656706] usb 1-2: Product: Mass Storage Device [ 443.656855] usb 1-2: Manufacturer: Generic [ 443.656993] usb 1-2: SerialNumber: ... [ 443.681017] usb-storage 1-2:1.0: USB Mass Storage device detected [ 443.681286] scsi host0: usb-storage 1-2:1.0 [ 443.681447] usbcore: registered new interface driver usb-storage [ 443.684044] usbcore: registered new interface driver uas [ 444.711094] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [ 444.713072] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 445.029583] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 445.029825] sd 0:0:0:0: [sda] Write Protect is off [ 445.030060] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 445.030226] sd 0:0:0:0: [sda] No Caching mode page found [ 445.030361] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 445.030479] sda: sda1 sda2 [ 445.030498] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 466.633091] usb 1-2: USB disconnect, device number 8 [ 467.842038] wlp58s0: authenticate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (local address=A679DC1B0DCCAC27DF01DA1289580802) [ 467.844011] wlp58s0: send auth to 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 467.878053] wlp58s0: authenticated [ 467.880016] wlp58s0: associate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 467.883078] wlp58s0: RX AssocResp from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (capab=0x1011 status=0 aid=19) [ 467.918056] wlp58s0: associated [ 467.983067] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F [ 468.231036] wlp58s0: deauthenticating from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F by local choice (Reason: 3=DEAUTH_LEAVING) [ 468.397013] wlp58s0: authenticate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (local address=A679DC1B0DCCAC27DF01DA1289580802) [ 468.399018] wlp58s0: send auth to 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 468.430013] wlp58s0: authenticated [ 468.432365] wlp58s0: associate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 468.435145] wlp58s0: RX AssocResp from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (capab=0x1011 status=0 aid=16) [ 468.477191] wlp58s0: associated [ 468.477300] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F [ 468.764029] wlp58s0: deauthenticating from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F by local choice (Reason: 3=DEAUTH_LEAVING) [ 470.391054] wlp58s0: authenticate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (local address=A679DC1B0DCCAC27DF01DA1289580802) [ 470.393012] wlp58s0: send auth to 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 470.427018] wlp58s0: authenticated [ 470.427040] wlp58s0: associate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 470.431045] wlp58s0: RX AssocResp from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (capab=0x1011 status=0 aid=20) [ 470.467067] wlp58s0: associated [ 470.514010] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F [ 470.711077] wlp58s0: deauthenticating from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F by local choice (Reason: 3=DEAUTH_LEAVING) [ 473.817023] wlp58s0: authenticate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (local address=A679DC1B0DCCAC27DF01DA1289580802) [ 473.819013] wlp58s0: send auth to 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 473.851074] wlp58s0: authenticated [ 473.851111] wlp58s0: associate with 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (try 1/3) [ 473.855056] wlp58s0: RX AssocResp from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F (capab=0x1011 status=0 aid=21) [ 473.889021] wlp58s0: associated [ 473.892009] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F [ 474.183015] wlp58s0: deauthenticating from 83A9CCC8A3A9CED6F6F0A37AC3DF8E1F by local choice (Reason: 3=DEAUTH_LEAVING) [ 475.735078] wlp58s0: authenticate with B722A46F0B4A01D8C8F3D06543FF6A23 (local address=A679DC1B0DCCAC27DF01DA1289580802) [ 475.737024] wlp58s0: send auth to B722A46F0B4A01D8C8F3D06543FF6A23 (try 1/3) [ 475.768020] wlp58s0: authenticated [ 475.768160] wlp58s0: associate with B722A46F0B4A01D8C8F3D06543FF6A23 (try 1/3) [ 475.775339] wlp58s0: RX AssocResp from B722A46F0B4A01D8C8F3D06543FF6A23 (capab=0x1411 status=0 aid=34) [ 475.825062] wlp58s0: associated [ 3423.495023] usb 1-1: USB disconnect, device number 2 [ 3423.611342] usb 1-1.3: USB disconnect, device number 4 [ 6737.559219] usb 1-1: new high-speed USB device number 9 using xhci_hcd [ 6737.689043] usb 1-1: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00 [ 6737.690786] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 6737.690960] usb 1-1: Product: Mass Storage Device [ 6737.691188] usb 1-1: Manufacturer: Generic [ 6737.691342] usb 1-1: SerialNumber: ... [ 6737.691507] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6737.691717] scsi host0: usb-storage 1-1:1.0 [ 6738.727044] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [ 6739.046341] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6739.046673] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 6739.046936] sd 0:0:0:0: [sda] Write Protect is off [ 6739.047138] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 6739.047320] sd 0:0:0:0: [sda] No Caching mode page found [ 6739.047567] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6739.047768] sda: sda1 sda2 [ 6739.047783] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6751.566036] wlp58s0: deauthenticating from B722A46F0B4A01D8C8F3D06543FF6A23 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6751.832016] zram0: detected capacity change from 15977472 to 0