[ 0.000000] Linux version 6.12.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.12.12-1~bpo12+1 (2025-02-23) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.436 MHz processor [ 0.002365] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002368] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008680] AGP: No AGP bridge found [ 0.008739] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008746] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008748] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010514] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010521] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.015968] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.017693] RAMDISK: [mem 0x28989000-0x304bbfff] ACPI: Early table checksum verification disabled [ 0.017705] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017709] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017716] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017721] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.017726] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017730] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017733] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017737] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017740] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017743] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017747] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017750] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017754] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017757] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017838] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] Zone ranges: [ 0.018215] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.018222] Movable zone start for each node [ 0.018226] Early memory node ranges [ 0.018226] node 0: [mem 0x0000000000001000-0x0000000000099fff] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018287] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028154] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.028181] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.028196] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.029118] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.029185] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029413] ACPI: PM-Timer IO Port: 0x808 [ 0.029424] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029432] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029436] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029438] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029440] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029445] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029446] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029456] CPU topo: Max. logical packages: 1 [ 0.029457] CPU topo: Max. logical dies: 1 [ 0.029457] CPU topo: Max. dies per package: 1 [ 0.029463] CPU topo: Max. threads per core: 1 [ 0.029464] CPU topo: Num. cores per package: 8 [ 0.029465] CPU topo: Num. threads per package: 8 [ 0.029465] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.029485] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029516] Booting paravirtualized kernel on bare hardware [ 0.029518] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035087] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.036202] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.036211] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.036214] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.036237] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.036289] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64", will be passed to user space. [ 0.042899] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.046202] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.046296] Fallback order for Node 0: 0 [ 0.046301] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 0.046302] Policy zone: Normal [ 0.046313] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.046315] AGP: Checking aperture... [ 0.052618] AGP: No AGP bridge found [ 0.052620] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.052622] Aperture pointing to e820 RAM. Ignoring. [ 0.052623] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052624] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052624] AGP: This costs you 64MB of RAM [ 0.052627] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052630] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.108602] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108817] ftrace: allocating 45541 entries in 178 pages [ 0.122726] ftrace: allocated 178 pages with 4 groups [ 0.123967] Dynamic Preempt: voluntary [ 0.124215] rcu: Preemptible hierarchical RCU implementation. [ 0.124216] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.124217] Trampoline variant of Tasks RCU enabled. [ 0.124218] Rude variant of Tasks RCU enabled. [ 0.124219] Tracing variant of Tasks RCU enabled. [ 0.124219] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.124220] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.124230] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124233] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124236] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.129599] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129819] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.129921] spurious 8259A interrupt: IRQ7. [ 0.133248] Console: colour VGA+ 80x25 [ 0.133251] printk: legacy console [tty0] enabled [ 0.133522] ACPI: Core revision 20240827 [ 0.133692] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133705] APIC: Switch to symmetric I/O mode setup [ 0.134080] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153705] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c970f170cf, max_idle_ns: 440795332114 ns [ 0.153713] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.87 BogoMIPS (lpj=12373744) [ 0.153745] LVT offset 1 assigned for vector 0xf9 [ 0.153751] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.153753] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.153759] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153762] Spectre V2 : Mitigation: Retpolines [ 0.153763] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153764] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.153765] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.153766] RETBleed: Mitigation: untrained return thunk [ 0.153769] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153771] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153776] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153778] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153779] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153781] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153783] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.185893] Freeing SMP alternatives memory: 40K [ 0.185900] pid_max: default: 32768 minimum: 301 [ 0.186749] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.187109] landlock: Up and running. [ 0.187111] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.187244] AppArmor: AppArmor initialized [ 0.187282] TOMOYO Linux initialized [ 0.187598] LSM support for eBPF active [ 0.188018] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.188103] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298071] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.298465] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.298494] ... version: 0 [ 0.298495] ... bit width: 48 [ 0.298496] ... generic registers: 6 [ 0.298497] ... value mask: 0000ffffffffffff [ 0.298499] ... max period: 00007fffffffffff [ 0.298500] ... fixed-purpose events: 0 [ 0.298501] ... event mask: 000000000000003f [ 0.298623] signal: max sigframe size: 1776 [ 0.298690] rcu: Hierarchical SRCU implementation. [ 0.298692] rcu: Max phase no-delay instances is 1000. [ 0.298767] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.304062] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.304220] smp: Bringing up secondary CPUs ... [ 0.304419] smpboot: x86: Booting SMP configuration: [ 0.304421] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.333768] smp: Brought up 1 node, 8 CPUs [ 0.333768] smpboot: Total of 8 processors activated (49494.97 BogoMIPS) [ 0.393758] node 0 deferred pages initialised in 56ms [ 0.393765] Memory: 24363060K/25119540K available (16384K kernel code, 2484K rwdata, 11636K rodata, 4220K init, 5000K bss, 748488K reserved, 0K cma-reserved) [ 0.394905] devtmpfs: initialized [ 0.394905] x86/mm: Memory block size: 128MB [ 0.400021] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.400021] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.400021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.400021] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.400021] pinctrl core: initialized pinctrl subsystem [ 0.402160] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.402982] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.403703] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.404444] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.404496] thermal_sys: Registered thermal governor 'fair_share' [ 0.404496] thermal_sys: Registered thermal governor 'bang_bang' [ 0.404496] thermal_sys: Registered thermal governor 'step_wise' [ 0.404496] thermal_sys: Registered thermal governor 'user_space' [ 0.404496] thermal_sys: Registered thermal governor 'power_allocator' [ 0.404496] cpuidle: using governor ladder [ 0.404496] cpuidle: using governor menu [ 0.404496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.404496] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.404496] PCI: Using configuration type 1 for base access [ 0.404496] PCI: Using configuration type 1 for extended access [ 0.404496] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.404496] mtrr: probably your BIOS does not setup all CPUs. [ 0.404496] mtrr: corrected configuration. [ 0.404496] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.408003] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408003] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.408003] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408003] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.410897] ACPI: Added _OSI(Module Device) [ 0.410897] ACPI: Added _OSI(Processor Device) [ 0.410897] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.410897] ACPI: Added _OSI(Processor Aggregator Device) [ 0.415355] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.430526] ACPI: Interpreter enabled [ 0.430526] ACPI: PM: (supports S0 S3 S4 S5) [ 0.430526] ACPI: Using IOAPIC for interrupt routing [ 0.430526] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.430526] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.430526] PCI: Using E820 reservations for host bridge windows [ 0.430526] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.439037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.439044] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.439407] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.439583] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.439597] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 0.439640] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.439745] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.439757] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 0.439797] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.439886] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.439898] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 0.439936] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.440028] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.440040] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 0.440077] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.440168] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.440181] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 0.440220] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.440315] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.440327] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 0.440367] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.440466] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.440480] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.440636] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.440811] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.440874] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.440959] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.440973] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.441108] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.441171] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.441257] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.441384] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.441398] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.441446] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.441448] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.441449] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.441541] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.441558] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.441692] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.441837] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.441862] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.441868] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.441981] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.442140] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.442275] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.442339] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.442428] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.442484] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.442536] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.442588] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.442646] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.442707] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.442803] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.442818] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.442879] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.442929] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.442987] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.443075] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.443090] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.443164] pci 0000:01:00.1: supports D1 D2 [ 0.443267] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.443323] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.443400] pci 0000:02:00.0: PME# supported from D3hot [ 0.443478] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.443546] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.443629] pci 0000:03:00.0: supports D1 D2 [ 0.443631] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.443729] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.443794] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.443877] pci 0000:04:00.0: supports D1 D2 [ 0.443878] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.443976] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.444065] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.444156] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.444266] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.444282] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.444385] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.449736] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.449823] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.450090] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 0.450141] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.450159] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.450315] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.450323] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.450325] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.450327] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.450329] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.450331] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.450333] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.451000] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.451063] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.451124] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.451184] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.451235] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.451274] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.451313] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.451353] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.451543] iommu: Default domain type: Translated [ 0.451543] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.451543] pps_core: LinuxPPS API ver. 1 registered [ 0.451543] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.451543] PTP clock support registered [ 0.451543] EDAC MC: Ver: 3.0.0 [ 0.451543] NetLabel: Initializing [ 0.451543] NetLabel: domain hash size = 128 [ 0.451543] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.451543] NetLabel: unlabeled traffic allowed by default [ 0.451543] PCI: Using ACPI for IRQ routing [ 0.458644] PCI: pci_cache_line_size set to 64 bytes [ 0.458705] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.458739] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.458739] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.458739] vgaarb: loaded [ 0.458739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.458739] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.459878] clocksource: Switched to clocksource tsc-early [ 0.459886] VFS: Disk quotas dquot_6.6.0 [ 0.459886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.459886] AppArmor: AppArmor Filesystem Enabled [ 0.459886] pnp: PnP ACPI init [ 0.459886] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459886] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.459886] system 00:03: [io 0x040b] has been reserved [ 0.459886] system 00:03: [io 0x04d6] has been reserved [ 0.459886] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.459886] system 00:03: [io 0x0c14] has been reserved [ 0.459886] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.459886] system 00:03: [io 0x0c52] has been reserved [ 0.459886] system 00:03: [io 0x0c6c] has been reserved [ 0.459886] system 00:03: [io 0x0c6f] has been reserved [ 0.459886] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.459886] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.459886] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.459886] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.459886] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.459886] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.459886] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.459886] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.459886] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.459886] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.459886] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.459886] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.459886] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.459886] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.459886] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.459886] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.459886] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.459886] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.459978] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.460458] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.467807] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.468108] NET: Registered PF_INET protocol family [ 0.468497] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.487766] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.487830] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.488180] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.488778] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.489068] TCP: Hash tables configured (established 262144 bind 65536) [ 0.489388] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.489568] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.489708] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.489848] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.489862] NET: Registered PF_XDP protocol family [ 0.489885] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 20036 usecs [ 0.526585] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 15449 usecs [ 0.542581] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 15413 usecs [ 0.558579] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 15612 usecs [ 0.558825] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.559173] PCI: CLS 64 bytes, default 64 [ 0.559274] Trying to unpack rootfs image as initramfs... [ 0.559962] PCI-DMA: Disabling AGP. [ 0.560056] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.560060] PCI-DMA: using GART IOMMU. [ 0.560063] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.560939] software IO TLB: tearing down default memory pool [ 0.565733] LVT offset 0 assigned for vector 0x400 [ 0.567940] perf: AMD IBS detected (0x000000ff) [ 0.568314] amd_uncore: 4 amd_nb counters detected [ 0.569243] Initialise system trusted keyrings [ 0.569261] Key type blacklist registered [ 0.569356] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.569376] zbud: loaded [ 0.569857] fuse: init (API version 7.41) [ 0.570262] integrity: Platform Keyring initialized [ 0.570279] integrity: Machine keyring initialized [ 0.598078] Key type asymmetric registered [ 0.598084] Asymmetric key parser 'x509' registered [ 1.572173] tsc: Refined TSC clocksource calibration: 3093.306 MHz [ 1.572200] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969448c73, max_idle_ns: 440795345271 ns [ 1.572237] clocksource: Switched to clocksource tsc [ 1.632224] Freeing initrd memory: 126156K [ 1.638873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.638953] io scheduler mq-deadline registered [ 1.641149] ledtrig-cpu: registered to indicate activity on CPUs [ 1.642029] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.643126] Could not retrieve perf counters (-19) [ 1.643440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.643626] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.644496] Linux agpgart interface v0.103 [ 1.645391] i8042: PNP: No PS/2 controller found. [ 1.645470] mousedev: PS/2 mouse device common for all mice [ 1.645496] rtc_cmos 00:06: RTC can wake from S4 [ 1.645734] rtc_cmos 00:06: registered as rtc0 [ 1.645758] rtc_cmos 00:06: setting system clock to 2025-03-20T15:35:47 UTC (1742484947) [ 1.645791] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.645802] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.646348] NET: Registered PF_INET6 protocol family [ 1.652582] Segment Routing with IPv6 [ 1.652618] In-situ OAM (IOAM) with IPv6 [ 1.652669] mip6: Mobile IPv6 [ 1.652678] NET: Registered PF_PACKET protocol family [ 1.652819] mpls_gso: MPLS GSO support [ 1.652832] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.653339] microcode: Current revision: 0x0600063e [ 1.653342] microcode: Updated early from: 0x06000626 [ 1.653510] IPI shorthand broadcast: enabled [ 1.656021] sched_clock: Marking stable (1652012198, 3869631)->(1675471612, -19589783) [ 1.656234] registered taskstats version 1 [ 1.656403] Loading compiled-in X.509 certificates [ 1.684312] Loaded X.509 cert 'Build time autogenerated kernel key: d2b9f7780b4c1a61ac47e8fa2c108e2eb11543ec' [ 1.687080] Demotion targets for Node 0: null [ 1.687377] Key type .fscrypt registered [ 1.687379] Key type fscrypt-provisioning registered [ 1.712479] Key type encrypted registered [ 1.712485] AppArmor: AppArmor sha256 policy hashing enabled [ 1.712505] ima: No TPM chip found, activating TPM-bypass! [ 1.712508] ima: Allocated hash algorithm: sha256 [ 1.712521] ima: No architecture policies found [ 1.712536] evm: Initialising EVM extended attributes: [ 1.712537] evm: security.selinux [ 1.712538] evm: security.SMACK64 (disabled) [ 1.712540] evm: security.SMACK64EXEC (disabled) [ 1.712541] evm: security.SMACK64TRANSMUTE (disabled) [ 1.712542] evm: security.SMACK64MMAP (disabled) [ 1.712543] evm: security.apparmor [ 1.712544] evm: security.ima [ 1.712545] evm: security.capability [ 1.712546] evm: HMAC attrs: 0x1 [ 1.714437] RAS: Correctable Errors collector initialized. [ 1.731962] clk: Disabling unused clocks [ 1.731967] PM: genpd: Disabling unused power domains [ 1.751000] Freeing unused decrypted memory: 2028K [ 1.752041] Freeing unused kernel image (initmem) memory: 4220K [ 1.752076] Write protecting the kernel read-only data: 28672k [ 1.752524] Freeing unused kernel image (rodata/data gap) memory: 652K [ 1.819528] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.819534] Run /init as init process [ 1.819535] with arguments: [ 1.819537] /init [ 1.819538] with environment: [ 1.819539] HOME=/ [ 1.819540] TERM=linux [ 1.819541] BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 [ 1.961888] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.961936] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.971400] Floppy drive(s): fd0 is 1.44M [ 1.976754] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.976766] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.981468] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.982042] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.982145] ACPI: button: Power Button [PWRF] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.989653] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.989735] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.990636] FDC 0 is a post-1991 82077 [ 2.002302] SCSI subsystem initialized [ 2.013893] ACPI: bus type USB registered [ 2.013942] usbcore: registered new interface driver usbfs [ 2.013961] usbcore: registered new interface driver hub [ 2.013989] usbcore: registered new device driver usb [ 2.049122] ACPI: bus type drm_connector registered [ 2.060936] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.060949] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.060958] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] libata version 3.00 loaded. [ 2.067531] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.071137] QUIRK: Enable AMD PLL fix [ 2.071169] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.071177] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.071183] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.071190] ehci-pci 0000:00:12.2: debug port 1 [ 2.071232] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.077200] pata_via 0000:05:00.1: version 0.3.4 [ 2.077811] scsi host0: pata_atiixp [ 2.078053] scsi host1: pata_via [ 2.078200] scsi host2: pata_atiixp [ 2.078255] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.078258] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.078365] scsi host3: pata_via [ 2.078420] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 2.078422] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 2.079995] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.080020] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.080107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.080111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.080114] usb usb1: Product: EHCI Host Controller [ 2.080116] usb usb1: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.080121] usb usb1: SerialNumber: ... [ 2.080326] hub 1-0:1.0: USB hub found [ 2.080339] hub 1-0:1.0: 5 ports detected [ 2.080568] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.080575] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.080580] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.080590] ehci-pci 0000:00:13.2: debug port 1 [ 2.080620] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.096057] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.096164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.096168] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.096170] usb usb2: Product: EHCI Host Controller [ 2.096172] usb usb2: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.096174] usb usb2: SerialNumber: ... [ 2.096334] hub 2-0:1.0: USB hub found [ 2.096346] hub 2-0:1.0: 5 ports detected [ 2.096586] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.096594] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.096599] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.096608] ehci-pci 0000:00:16.2: debug port 1 [ 2.096637] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.111906] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.111968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.111971] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.111974] usb usb3: Product: EHCI Host Controller [ 2.111976] usb usb3: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.111978] usb usb3: SerialNumber: ... [ 2.112151] hub 3-0:1.0: USB hub found [ 2.112163] hub 3-0:1.0: 4 ports detected [ 2.112392] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.112400] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.112463] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.112624] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.112628] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.112632] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.112647] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.112696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.112699] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.112701] usb usb4: Product: xHCI Host Controller [ 2.112703] usb usb4: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.112705] usb usb4: SerialNumber: ... [ 2.112847] hub 4-0:1.0: USB hub found [ 2.112862] hub 4-0:1.0: 2 ports detected [ 2.113018] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.113055] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.113084] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.113120] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.113123] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.113125] usb usb5: Product: xHCI Host Controller [ 2.113127] usb usb5: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.113129] usb usb5: SerialNumber: ... [ 2.113270] hub 5-0:1.0: USB hub found [ 2.113285] hub 5-0:1.0: 2 ports detected [ 2.113528] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.113534] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.113585] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.113736] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.113746] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.113750] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.113806] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.113810] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.113812] usb usb7: Product: xHCI Host Controller [ 2.113814] usb usb7: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.113816] usb usb7: SerialNumber: ... [ 2.113973] hub 7-0:1.0: USB hub found [ 2.113988] hub 7-0:1.0: 2 ports detected [ 2.114147] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.114198] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.114201] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.114203] usb usb8: Product: xHCI Host Controller [ 2.114205] usb usb8: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.114207] usb usb8: SerialNumber: ... [ 2.114347] hub 8-0:1.0: USB hub found [ 2.114362] hub 8-0:1.0: 2 ports detected [ 2.176072] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.176077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.176079] usb usb6: Product: OHCI PCI host controller [ 2.176081] usb usb6: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.176082] usb usb6: SerialNumber: ... [ 2.176222] hub 6-0:1.0: USB hub found [ 2.176234] hub 6-0:1.0: 5 ports detected [ 2.176620] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.176627] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.176646] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.235977] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.235984] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.235987] usb usb9: Product: OHCI PCI host controller [ 2.235990] usb usb9: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.235993] usb usb9: SerialNumber: ... [ 2.236203] hub 9-0:1.0: USB hub found [ 2.236218] hub 9-0:1.0: 5 ports detected [ 2.236715] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.236724] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.236749] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.244204] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.244210] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.244215] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.244871] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.300019] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.300024] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.300027] usb usb10: Product: OHCI PCI host controller [ 2.300031] usb usb10: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.300033] usb usb10: SerialNumber: ... [ 2.300187] hub 10-0:1.0: USB hub found [ 2.300198] hub 10-0:1.0: 2 ports detected [ 2.300483] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.300490] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.300517] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.343979] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.360059] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.360063] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.360066] usb usb11: Product: OHCI PCI host controller [ 2.360067] usb usb11: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.360069] usb usb11: SerialNumber: ... [ 2.360283] hub 11-0:1.0: USB hub found [ 2.360293] hub 11-0:1.0: 4 ports detected [ 2.404270] ahci 0000:00:11.0: version 3.0 [ 2.404499] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.404505] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.404508] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.410248] scsi host4: ahci [ 2.410582] scsi host5: ahci [ 2.410794] scsi host6: ahci [ 2.411029] scsi host7: ahci [ 2.411113] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.411118] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.411121] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.411124] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.411362] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.411367] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.411370] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.411853] scsi host8: ahci [ 2.412227] scsi host9: ahci [ 2.412311] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.412315] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.413588] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.413602] sd 0:0:0:0: [sda] Write Protect is off [ 2.413605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.413624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.413665] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.444551] sda: sda1 sda2 [ 2.444742] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.492224] usb 2-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.492229] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.492513] hub 2-1:1.0: USB hub found [ 2.492595] hub 2-1:1.0: 2 ports detected [ 2.596305] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.599980] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 2.724078] ata6: SATA link down (SStatus 0 SControl 300) [ 2.724134] ata8: SATA link down (SStatus 0 SControl 300) [ 2.787132] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 2.787145] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.787151] usb 6-1: Product: USB Device [ 2.787156] usb 6-1: Manufacturer: COMPANY [ 2.806068] hid: raw HID events driver (C) Jiri Kosina [ 2.816056] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 2.880004] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.880036] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.880060] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.880089] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.880181] ata7.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.880224] ata7.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.880362] ata7.00: configured for UDMA/133 [ 2.881100] ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.881208] ata10.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.881337] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.882177] ata9.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.882552] ata5.00: configured for UDMA/133 [ 2.882577] ata10.00: configured for UDMA/133 [ 2.882804] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.882998] ata9.00: configured for UDMA/133 [ 2.883234] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.883240] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.883255] sd 4:0:0:0: [sdb] Write Protect is off [ 2.883259] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.883284] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.883311] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.883324] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.883806] sd 6:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.883819] sd 6:0:0:0: [sdc] Write Protect is off [ 2.883822] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.883841] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.883888] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.885732] scsi 8:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.920283] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.920596] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.930169] sdb: sdb1 sdb2 [ 2.930488] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.943075] scsi 9:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 3.009330] usbcore: registered new interface driver usbhid [ 3.009335] usbhid: USB HID core driver [ 3.012368] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.069891] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.069898] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.148168] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.148367] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 3.148484] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.148827] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 3.204020] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.204315] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.303966] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 3.306021] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 3.347478] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.396878] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 3.400747] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 3.400752] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.400755] usb 2-1.1: Product: 802.11n NIC [ 3.400757] usb 2-1.1: Manufacturer: Realtek [ 3.400758] usb 2-1.1: SerialNumber: ... [ 3.427957] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 3.519996] usb 2-3: new high-speed USB device number 5 using ehci-pci [ 3.612060] usb 6-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.612065] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.612068] usb 6-2: Product: A4Tech Gaming Mouse [ 3.612069] usb 6-2: Manufacturer: PixArt [ 3.618323] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:3519.0004/input/input6 [ 3.618559] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.622564] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:3519.0005/input/input8 [ 3.676196] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 3.880772] usb 2-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.880778] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.880781] usb 2-3: SerialNumber: ... [ 4.374197] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.374202] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.374204] usb 9-2: Product: NOVA AVR [ 4.374206] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 6.908098] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 7.233580] [drm] amdgpu kernel modesetting enabled. [ 7.233724] amdgpu: Virtual CRAT table created for CPU [ 7.233759] amdgpu: Topology: Add CPU node [ 7.234068] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.234095] [drm] register mmio base: 0xFEA00000 [ 7.234096] [drm] register mmio size: 262144 [ 7.234176] [drm] add ip block number 0 <vi_common> [ 7.234180] [drm] add ip block number 1 <gmc_v8_0> [ 7.234182] [drm] add ip block number 2 <tonga_ih> [ 7.234184] [drm] add ip block number 3 <gfx_v8_0> [ 7.234186] [drm] add ip block number 4 <sdma_v3_0> [ 7.234188] [drm] add ip block number 5 <powerplay> [ 7.234190] [drm] add ip block number 6 <dm> [ 7.234191] [drm] add ip block number 7 <uvd_v6_0> [ 7.234192] [drm] add ip block number 8 <vce_v3_0> [ 7.234439] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.234444] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.234744] [drm] UVD is enabled in VM mode [ 7.234745] [drm] UVD ENC is enabled in VM mode [ 7.234747] [drm] VCE enabled in VM mode [ 7.234785] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.235866] Console: switching to colour dummy device 80x25 [ 7.235888] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.235891] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.235924] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.236234] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.236238] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.236244] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.236246] [drm] RAM width 256bits GDDR5 [ 7.236372] [drm] amdgpu: 8192M of VRAM memory ready [ 7.236374] [drm] amdgpu: 11997M of GTT memory ready. [ 7.236392] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.236761] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.237927] [drm] Chained IB support enabled! [ 7.242816] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.245683] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.247400] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.559687] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 7.624350] [drm] UVD and UVD ENC initialized successfully. [ 7.734293] [drm] VCE initialized successfully. [ 7.735317] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.735332] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.739087] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.739934] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 7.756207] fbcon: amdgpudrmfb (fb0) is primary device [ 7.836662] Console: switching to colour frame buffer device 160x64 [ 7.855062] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.007950] raid6: sse2x4 gen() 12217 MB/s [ 8.075948] raid6: sse2x2 gen() 11419 MB/s [ 8.143948] raid6: sse2x1 gen() 7837 MB/s [ 8.143950] raid6: using algorithm sse2x4 gen() 12217 MB/s [ 8.211948] raid6: .... xor() 4553 MB/s, rmw enabled [ 8.211951] raid6: using ssse3x2 recovery algorithm [ 8.213738] xor: automatically using best checksumming function avx [ 8.215242] async_tx: api initialized (async) [ 8.560891] Btrfs loaded, zoned=yes, fsverity=yes [ 21.345045] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 21.345105] floppy: error 10 while reading block 0 [ 21.653021] EXT4-fs (sdc4): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 21.751592] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.321939] loop: module loaded [ 22.342443] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 22.342578] device-mapper: uevent: version 1.0.3 [ 22.342847] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 22.365948] EXT4-fs (sdc4): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. Quota mode: none. [ 22.375015] lp: driver loaded but no devices found [ 22.382555] ppdev: user-space parallel port driver [ 22.667745] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.667810] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 22.712807] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 22.741613] sr 8:0:0:0: Attached scsi generic sg3 type 5 [ 22.754077] sr 9:0:0:0: Attached scsi generic sg4 type 5 [ 22.876312] acpi_cpufreq: overriding BIOS provided _PSD data [ 22.877347] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 22.877461] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 22.881048] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 22.905694] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 22.910861] at24 0-0050: supply vcc not found, using dummy regulator [ 22.915889] random: crng init done [ 22.925881] mc: Linux media interface: v0.10 [ 22.943936] at24 0-0050: 256 byte spd EEPROM, read-only [ 22.944140] at24 0-0051: supply vcc not found, using dummy regulator [ 22.944281] cryptd: max_cpu_qlen set to 1000 [ 22.946017] at24 0-0051: 256 byte spd EEPROM, read-only [ 22.946111] at24 0-0052: supply vcc not found, using dummy regulator [ 22.956732] at24 0-0052: 256 byte spd EEPROM, read-only [ 22.956787] at24 0-0053: supply vcc not found, using dummy regulator [ 22.968507] at24 0-0053: 256 byte spd EEPROM, read-only [ 22.972510] AES CTR mode by8 optimization enabled [ 23.000452] videodev: Linux video capture interface: v2.00 [ 23.078832] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 23.079801] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 23.079816] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 23.134369] usb 2-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 23.142545] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 23.181164] usbcore: registered new interface driver uvcvideo [ 23.197070] Registered IR keymap rc-avermedia-m135a [ 23.232290] IR NEC protocol handler initialized [ 23.233893] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.234223] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 23.233973] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 23.234530] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 23.234825] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.235112] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 23.251749] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 23.251853] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 23.251986] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 23.252093] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 23.252183] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 23.252272] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 23.259936] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 23.259995] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 23.260055] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 23.348726] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 23.348733] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.348736] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.348739] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 23.348741] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 23.348742] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 23.348744] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 23.348746] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 23.348748] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 23.370493] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 23.370600] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 23.370702] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 23.370935] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 23.371019] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 23.371126] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 23.371430] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 23.371507] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 23.415975] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 23.415982] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 23.415984] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 23.415987] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415989] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 23.415990] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415992] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415994] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415995] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415996] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.415998] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416000] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416001] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416003] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416004] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.416006] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.496164] kvm_amd: TSC scaling supported [ 23.496168] kvm_amd: Nested Virtualization enabled [ 23.496169] kvm_amd: Nested Paging enabled [ 23.496171] kvm_amd: LBR virtualization supported [ 23.517821] MCE: In-kernel MCE decoding enabled. [ 23.539974] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 23.623985] tda829x 13-004b: setting tuner address to 60 [ 23.695723] usb 2-1.1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 23.695739] usb 2-1.1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 23.695745] usb 2-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 23.696882] usb 2-1.1: Firmware revision 28.0 (signature 0x88e1) [ 23.715902] tda829x 13-004b: type set to tda8290+75a [ 24.259211] usbcore: registered new interface driver rtl8xxxu [ 24.272612] rtl8xxxu 2-1.1:1.0 wlxd037459855f3: renamed from wlan0 [ 24.563983] usb 2-3: set resolution quirk: cval->res = 384 [ 24.565165] usbcore: registered new interface driver snd-usb-audio [ 27.420770] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 27.424108] saa7134: saa7133[0]: registered device radio0 [ 27.459378] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 27.459416] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 31.693067] Process accounting resumed [ 31.829354] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 32.027709] NET: Registered PF_QIPCRTR protocol family [ 33.912667] wlxd037459855f3: No basic rates, using min rate instead [ 33.912682] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 33.918001] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 33.918008] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 33.920886] wlxd037459855f3: authenticated [ 33.923922] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 33.926388] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=8) [ 33.926396] wlxd037459855f3: No basic rates, using min rate instead [ 33.928115] usb 2-1.1: rtl8xxxu_bss_info_changed: HT supported [ 33.930367] wlxd037459855f3: associated [ 34.022141] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 35.784227] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 35.784234] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 35.784238] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 36.088073] usb 2-3: reset high-speed USB device number 5 using ehci-pci [ 44.308186] usb 2-3: reset high-speed USB device number 5 using ehci-pci [ 138.854680] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 139.474723] watchdog: watchdog0: watchdog did not stop!