[ 0.000000] Linux version 6.1.69-t2-jammy (XXX@XXX) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #2 SMP PREEMPT_DYNAMIC Thu Dec 21 16:19:27 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.69-t2-jammy root=UUID=HASH_44F-5497-5119-0DE6-1D2EEE9E196F ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000605b2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000605b3000-0x0000000060732fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000060733000-0x0000000061234fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000061235000-0x0000000061235fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000061236000-0x0000000061236fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000061237000-0x000000006157dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000006157e000-0x000000006157efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006157f000-0x0000000073c7efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073c7f000-0x0000000073f4efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073f4f000-0x0000000073f9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000073f9f000-0x0000000073ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000073fff000-0x0000000073ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000074000000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078e00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff9fb000-0x00000000ffa29fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x58f04698-0x58f04cc9] usable ==> usable [ 0.000000] e820: update [mem 0x58f04698-0x58f04cc9] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000058f04697] usable [ 0.000000] reserve setup_data: [mem 0x0000000058f04698-0x0000000058f04cc9] usable [ 0.000000] reserve setup_data: [mem 0x0000000058f04cca-0x00000000605b2fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000605b3000-0x0000000060732fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000060733000-0x0000000061234fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000061235000-0x0000000061235fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000061236000-0x0000000061236fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000061237000-0x000000006157dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000006157e000-0x000000006157efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006157f000-0x0000000073c7efff] usable [ 0.000000] reserve setup_data: [mem 0x0000000073c7f000-0x0000000073f4efff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000073f4f000-0x0000000073f9efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000073f9f000-0x0000000073ffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000073fff000-0x0000000073ffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000074000000-0x0000000077ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000078e00000-0x000000007fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe010000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff9fb000-0x00000000ffa29fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] efi: EFI v2.40 by Apple [ 0.000000] efi: Apple Mac detected, using EFI v1.10 runtime services only [ 0.000000] efi: ACPI=0x73ffe000 ACPI 2.0=0x73ffe014 SMBIOS=0x73f40000 SMBIOS 3.0=0x73f3e000 MOKvar=0x73d5b000 [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: Apple Inc. MacBookAir9,1/Mac-0CFF9C7C2B63DF8D, BIOS XXX.XXX.XXX.XXX.0 (iBridge: XXX.XXX.XXX.XXX.0,0) 11/11/2023 [ 0.000000] tsc: Detected 1100.000 MHz processor [ 0.000000] tsc: Detected 1113.600 MHz TSC [ 0.002269] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002272] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002281] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.002572] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003635] last_pfn = 0x74000 max_arch_pfn = 0x400000000 [ 0.036918] Using GB pages for direct mapping [ 0.037475] Secure boot disabled [ 0.037475] RAMDISK: [mem 0x58f05000-0x5fe7dfff] ACPI: Early table checksum verification disabled [ 0.037483] ACPI: RSDP 0x0000000073FFE014 000024 (v02 APPLE ) [ 0.037487] ACPI: XSDT 0x0000000073FFD148 0000C4 (v01 APPLE Apple00 00000000 01000013) [ 0.037492] ACPI: FACP 0x0000000073FE5000 000114 (v06 APPLE Apple00 00000000 Loki 0000005F) [ 0.037498] ACPI: DSDT 0x0000000073FD9000 0073EB (v02 APPLE MacBook 00080001 INTL 20160930) [ 0.037501] ACPI: FACS 0x0000000073F78000 000040 [ 0.037504] ACPI: SSDT 0x0000000073FFC000 00032F (v02 PmRef Cpu0Ist 00003000 INTL 20160930) [ 0.037507] ACPI: SSDT 0x0000000073FFB000 0005FC (v02 PmRef ApIst 00003000 INTL 20160930) [ 0.037510] ACPI: SSDT 0x0000000073FFA000 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160930) [ 0.037512] ACPI: SSDT 0x0000000073FF9000 00030A (v02 PmRef ApCst 00003000 INTL 20160930) [ 0.037515] ACPI: SSDT 0x0000000073FF7000 001C1E (v02 CpuRef CpuSsdt 00003000 INTL 20160930) [ 0.037517] ACPI: SSDT 0x0000000073FF3000 0034C3 (v02 SaSsdt SaSsdt 00003000 INTL 20160930) [ 0.037520] ACPI: SSDT 0x0000000073FE7000 00BA9F (v02 INTEL TcssSsdt 00001000 INTL 20160930) [ 0.037522] ACPI: ECDT 0x0000000073FE6000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.037525] ACPI: HPET 0x0000000073FE4000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.037527] ACPI: APIC 0x0000000073FE3000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [ 0.037530] ACPI: MCFG 0x0000000073FE2000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.037532] ACPI: SBST 0x0000000073FE1000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.037535] ACPI: SSDT 0x0000000073FD8000 000131 (v02 APPLE ApplITbt 00001000 INTL 20160930) [ 0.037538] ACPI: SSDT 0x0000000073FD6000 000031 (v01 APPLE SsdtS3 00001000 INTL 20160930) [ 0.037540] ACPI: SSDT 0x0000000073FD5000 000051 (v01 APPLE SataAhci 00001000 INTL 20160930) [ 0.037543] ACPI: SSDT 0x0000000073FD4000 0001D0 (v02 APPLE TXhci 00001000 INTL 20160930) [ 0.037545] ACPI: SSDT 0x0000000073FD3000 0002DF (v02 APPLE Xhci 00001000 INTL 20160930) [ 0.037548] ACPI: DMAR 0x0000000073FD2000 000088 (v02 APPLE EDK2 00000002 01000013) [ 0.037550] ACPI: MCFG 0x0000000073FD1000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.037552] ACPI: Reserving FACP table memory at [mem 0x73fe5000-0x73fe5113] ACPI: Reserving DSDT table memory at [mem 0x73fd9000-0x73fe03ea] ACPI: Reserving FACS table memory at [mem 0x73f78000-0x73f7803f] ACPI: Reserving SSDT table memory at [mem 0x73ffc000-0x73ffc32e] ACPI: Reserving SSDT table memory at [mem 0x73ffb000-0x73ffb5fb] ACPI: Reserving SSDT table memory at [mem 0x73ffa000-0x73ffa385] ACPI: Reserving SSDT table memory at [mem 0x73ff9000-0x73ff9309] ACPI: Reserving SSDT table memory at [mem 0x73ff7000-0x73ff8c1d] ACPI: Reserving SSDT table memory at [mem 0x73ff3000-0x73ff64c2] ACPI: Reserving SSDT table memory at [mem 0x73fe7000-0x73ff2a9e] ACPI: Reserving ECDT table memory at [mem 0x73fe6000-0x73fe6052] ACPI: Reserving HPET table memory at [mem 0x73fe4000-0x73fe4037] ACPI: Reserving APIC table memory at [mem 0x73fe3000-0x73fe30bb] ACPI: Reserving MCFG table memory at [mem 0x73fe2000-0x73fe203b] ACPI: Reserving SBST table memory at [mem 0x73fe1000-0x73fe102f] ACPI: Reserving SSDT table memory at [mem 0x73fd8000-0x73fd8130] ACPI: Reserving SSDT table memory at [mem 0x73fd6000-0x73fd6030] ACPI: Reserving SSDT table memory at [mem 0x73fd5000-0x73fd5050] ACPI: Reserving SSDT table memory at [mem 0x73fd4000-0x73fd41cf] ACPI: Reserving SSDT table memory at [mem 0x73fd3000-0x73fd32de] ACPI: Reserving DMAR table memory at [mem 0x73fd2000-0x73fd2087] ACPI: Reserving MCFG table memory at [mem 0x73fd1000-0x73fd103b] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware [ 0.037804] No NUMA configuration found [ 0.037805] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] Zone ranges: [ 0.037996] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000027fffffff] Device empty [ 0.038001] Movable zone start for each node [ 0.038003] Early memory node ranges [ 0.038003] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000605b2fff] node 0: [mem 0x0000000060733000-0x0000000061234fff] node 0: [mem 0x0000000061237000-0x000000006157dfff] node 0: [mem 0x000000006157f000-0x0000000073c7efff] node 0: [mem 0x0000000073fff000-0x0000000073ffffff] node 0: [mem 0x0000000100000000-0x000000027fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038034] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.040239] On node 0, zone DMA32: 384 pages in unavailable ranges [ 0.040245] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.040604] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.040611] On node 0, zone DMA32: 896 pages in unavailable ranges [ 0.048236] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.048287] Reserving Intel graphics memory at [mem 0x7a000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.048666] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.048668] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.048669] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.048669] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.048670] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.048670] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.048671] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.048671] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.048718] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.048720] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.048721] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.048725] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.048727] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.048729] TSC deadline timer available [ 0.048730] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.048744] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x58f04000-0x58f04fff] PM: hibernation: Registered nosave memory: [mem 0x58f04000-0x58f04fff] PM: hibernation: Registered nosave memory: [mem 0x605b3000-0x60732fff] PM: hibernation: Registered nosave memory: [mem 0x61235000-0x61235fff] PM: hibernation: Registered nosave memory: [mem 0x61236000-0x61236fff] PM: hibernation: Registered nosave memory: [mem 0x6157e000-0x6157efff] PM: hibernation: Registered nosave memory: [mem 0x73c7f000-0x73f4efff] PM: hibernation: Registered nosave memory: [mem 0x73f4f000-0x73f9efff] PM: hibernation: Registered nosave memory: [mem 0x73f9f000-0x73ffefff] PM: hibernation: Registered nosave memory: [mem 0x74000000-0x77ffffff] PM: hibernation: Registered nosave memory: [mem 0x78000000-0x78dfffff] PM: hibernation: Registered nosave memory: [mem 0x78e00000-0x7fffffff] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe00ffff] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xff9fafff] PM: hibernation: Registered nosave memory: [mem 0xff9fb000-0xffa29fff] PM: hibernation: Registered nosave memory: [mem 0xffa2a000-0xffffffff] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.048766] Booting paravirtualized kernel on bare hardware [ 0.048768] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.048774] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.048891] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.048896] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.048898] pcpu-alloc: [0] 0 1 2 3 [ 0.048920] Fallback order for Node 0: 0 [ 0.048922] Built 1 zonelists, mobility grouping on. Total pages: 2014481 [ 0.048923] Policy zone: Normal [ 0.048924] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.69-t2-jammy root=UUID=HASH_44F-5497-5119-0DE6-1D2EEE9E196F ro quiet splash vt.handoff=7 [ 0.048991] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.1.69-t2-jammy", will be passed to user space. [ 0.049043] random: crng init done [ 0.049323] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.049460] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.049500] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.049509] software IO TLB: area num 4. [ 0.069466] Memory: 7510568K/8186476K available (18440K kernel code, 4176K rwdata, 5896K rodata, 3168K init, 17068K bss, 675648K reserved, 0K cma-reserved) [ 0.069550] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.069577] ftrace: allocating 50085 entries in 196 pages [ 0.077722] ftrace: allocated 196 pages with 3 groups [ 0.078623] Dynamic Preempt: voluntary [ 0.078647] rcu: Preemptible hierarchical RCU implementation. [ 0.078648] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.078649] Trampoline variant of Tasks RCU enabled. [ 0.078650] Rude variant of Tasks RCU enabled. [ 0.078650] Tracing variant of Tasks RCU enabled. [ 0.078651] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.078651] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.082164] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.082456] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.082640] Console: colour dummy device 80x25 [ 0.082655] printk: console [tty0] enabled [ 0.082670] ACPI: Core revision 20220331 [ 0.082783] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.082784] APIC: Switch to symmetric I/O mode setup [ 0.082786] DMAR: Host address width 39 [ 0.082787] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.082794] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e [ 0.082796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.082802] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.082804] DMAR: RMRR base: 0x00000079800000 end: 0x0000007fffffff [ 0.082807] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.082808] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.082809] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.082810] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.084469] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.084471] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.088849] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x100d48ce7a0, max_idle_ns: 440795212195 ns [ 0.088857] Calibrating delay loop (skipped), value calculated using timer frequency.. 2227.20 BogoMIPS (lpj=4454400) [ 0.088886] x86/cpu: SGX disabled by BIOS. [ 0.088894] CPU0: Thermal monitoring enabled (TM1) [ 0.088896] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.088963] process: using mwait in idle threads [ 0.088965] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.088966] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.088969] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.088971] Spectre V2 : Mitigation: Enhanced IBRS [ 0.088971] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.088972] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.088972] RETBleed: Mitigation: Enhanced IBRS [ 0.088974] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.088975] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.088979] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.088980] SRBDS: Mitigation: Microcode [ 0.088982] GDS: Mitigation: Microcode [ 0.088990] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.088991] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.088991] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.088992] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.088993] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.088993] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.088994] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.088995] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.088996] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.088997] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.088998] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.088999] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.089000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.092853] Freeing SMP alternatives memory: 44K [ 0.092853] pid_max: default: 32768 minimum: 301 [ 0.092853] LSM: Security Framework initializing [ 0.092853] landlock: Up and running. [ 0.092853] Yama: becoming mindful. [ 0.092853] AppArmor: AppArmor initialized [ 0.092853] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.092853] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.092853] smpboot: CPU0: Intel(R) Core(TM) i3-1000NG4 CPU @ 1.10GHz (family: 0x6, model: 0x7e, stepping: 0x5) [ 0.092853] cblist_init_generic: Setting adjustable number of callback queues. [ 0.092853] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.092853] cblist_init_generic: Setting adjustable number of callback queues. [ 0.092853] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.092853] cblist_init_generic: Setting adjustable number of callback queues. [ 0.092853] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.092853] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.092853] ... version: 5 [ 0.092853] ... bit width: 48 [ 0.092853] ... generic registers: 8 [ 0.092853] ... value mask: 0000ffffffffffff [ 0.092853] ... max period: 00007fffffffffff [ 0.092853] ... fixed-purpose events: 4 [ 0.092853] ... event mask: 0001000f000000ff [ 0.092853] signal: max sigframe size: 3632 [ 0.092853] Estimated ratio of average max frequency by base frequency (times 1024): 2978 [ 0.092853] rcu: Hierarchical SRCU implementation. [ 0.092853] rcu: Max phase no-delay instances is 1000. [ 0.092853] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.092853] smp: Bringing up secondary CPUs ... [ 0.092853] x86: Booting SMP configuration: [ 0.092853] .... node #0, CPUs: #1 #2 [ 0.095114] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.095114] #3 [ 0.098430] smp: Brought up 1 node, 4 CPUs [ 0.098430] smpboot: Max logical packages: 1 [ 0.098430] smpboot: Total of 4 processors activated (8908.80 BogoMIPS) [ 0.101230] devtmpfs: initialized [ 0.101230] x86/mm: Memory block size: 128MB [ 0.101442] ACPI: PM: Registering ACPI NVS region [mem 0x61235000-0x61235fff] (4096 bytes) [ 0.101442] ACPI: PM: Registering ACPI NVS region [mem 0x73f4f000-0x73f9efff] (327680 bytes) [ 0.101442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.101442] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.101442] pinctrl core: initialized pinctrl subsystem [ 0.101442] PM: RTC time: 05:39:51, date: 2023-12-29 [ 0.101661] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.101824] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.101906] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.101996] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.102011] thermal_sys: Registered thermal governor 'fair_share' [ 0.102011] thermal_sys: Registered thermal governor 'bang_bang' [ 0.102011] thermal_sys: Registered thermal governor 'step_wise' [ 0.102011] thermal_sys: Registered thermal governor 'user_space' [ 0.102011] thermal_sys: Registered thermal governor 'power_allocator' [ 0.102011] EISA bus registered [ 0.102011] cpuidle: using governor ladder [ 0.102011] cpuidle: using governor menu [ 0.102011] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.102011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.102011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.102011] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.102011] PCI: Using configuration type 1 for base access [ 0.102011] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.104980] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.104985] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.104985] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.104985] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.104985] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.105303] ACPI: Disabled all _OSI OS vendors [ 0.105307] ACPI: Added _OSI(Module Device) [ 0.105309] ACPI: Added _OSI(Processor Device) [ 0.105312] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.105314] ACPI: Added _OSI(Processor Aggregator Device) [ 0.105317] ACPI: Added _OSI(Darwin) [ 0.134758] ACPI: 13 ACPI AML tables successfully acquired and loaded [ 0.135776] ACPI: EC: EC started [ 0.135778] ACPI: EC: interrupt blocked [ 0.139405] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.139408] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.139819] ACPI: BIOS _OSI(Darwin) query honored via DMI [ 0.140388] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.141378] ACPI: Dynamic OEM Table Load: [ 0.141396] ACPI: SSDT 0xFFFF8A0C00D23A00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160930) [ 0.142276] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.142532] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CDW3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20220331/dsopcode-198) [ 0.142540] [ 0.142542] Initialized Local Variables for Method [_OSC]: [ 0.142543] Local0: (____ptrval____) <Obj> Buffer(8) 01 00 00 00 FF 70 24 00 [ 0.142557] [ 0.142559] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 0.142560] Arg0: (____ptrval____) <Obj> Buffer(16) 6E B0 11 08 27 4A F9 44 [ 0.142572] Arg1: (____ptrval____) <Obj> Integer 0000000000000001 [ 0.142578] Arg2: (____ptrval____) <Obj> Integer 0000000000000002 [ 0.142583] Arg3: (____ptrval____) <Obj> Buffer(8) 01 00 00 00 FF 70 24 00 [ 0.142594] [ 0.142597] ACPI Error: Aborting method \_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529) [ 0.143120] ACPI: Dynamic OEM Table Load: [ 0.143127] ACPI Error: AE_ALREADY_EXISTS, SSDT 0xFFFF8A0C0127BC00 Table is already loaded (20220331/tbdata-548) [ 0.143135] [ 0.143136] No Local Variables are initialized for Method [GCAP] [ 0.143139] Initialized Arguments for Method [GCAP]: (1 arguments defined for method invocation) [ 0.143140] Arg0: (____ptrval____) <Obj> Buffer(8) 00 00 00 00 BF 0B 00 00 [ 0.143151] [ 0.143154] ACPI Error: Aborting method \_SB.PR00.GCAP due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.143164] ACPI Error: Aborting method \_SB.PR00._PDC due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.143170] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 0.143634] ACPI: Dynamic OEM Table Load: [ 0.143640] ACPI Error: AE_ALREADY_EXISTS, SSDT 0xFFFF8A0C012D3800 Table is already loaded (20220331/tbdata-548) [ 0.143647] [ 0.143649] No Local Variables are initialized for Method [APPT] [ 0.143651] No Arguments are initialized for method [APPT] [ 0.143654] ACPI Error: Aborting method \_SB.PR01.APPT due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.143662] ACPI Error: Aborting method \_SB.PR01.GCAP due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.143670] ACPI Error: Aborting method \_SB.PR01._PDC due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.143676] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 0.144272] ACPI: Dynamic OEM Table Load: [ 0.144283] ACPI: SSDT 0xFFFF8A0C00D0A000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160930) [ 0.146220] ACPI: Dynamic OEM Table Load: [ 0.146226] ACPI Error: AE_ALREADY_EXISTS, SSDT 0xFFFF8A0C0127BC00 Table is already loaded (20220331/tbdata-548) [ 0.146233] [ 0.146234] No Local Variables are initialized for Method [APCT] [ 0.146237] No Arguments are initialized for method [APCT] [ 0.146240] ACPI Error: Aborting method \_SB.PR01.APCT due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.146248] ACPI Error: Aborting method \_SB.PR02.GCAP due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.146256] ACPI Error: Aborting method \_SB.PR02._PDC due to previous error (AE_ALREADY_EXISTS) (20220331/psparse-529) [ 0.146262] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 0.146972] ACPI: Interpreter enabled [ 0.147015] ACPI: PM: (supports S0 S3 S4 S5) [ 0.147017] ACPI: Using IOAPIC for interrupt routing [ 0.147072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.147074] PCI: Ignoring E820 reservations for host bridge windows [ 0.147401] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.169010] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.169020] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 0.170600] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfeafffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:8a06] type 00 class 0x060000 [ 0.171176] pci 0000:00:02.0: [8086:8a5c] type 00 class 0x030000 [ 0.171191] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.171237] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.171242] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:8a03] type 00 class 0x118000 [ 0.171805] pci 0000:00:04.0: reg 0x10: [mem 0x8fa00000-0x8fa0ffff 64bit] pci 0000:00:07.0: [8086:8a1d] type 01 class 0x060400 [ 0.172040] pci 0000:00:07.0: Overriding RP PIO Log Size to 4 [ 0.172152] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.172292] pci 0000:00:07.1: [8086:8a1f] type 01 class 0x060400 [ 0.172348] pci 0000:00:07.1: Overriding RP PIO Log Size to 4 [ 0.172457] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.172662] pci 0000:00:0d.0: [8086:8a13] type 00 class 0x0c0330 [ 0.172679] pci 0000:00:0d.0: reg 0x10: [mem 0x8fa10000-0x8fa1ffff 64bit] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.172865] pci 0000:00:0d.2: [8086:8a17] type 00 class 0x088000 [ 0.172880] pci 0000:00:0d.2: reg 0x10: [mem 0x8fa40000-0x8fa7ffff 64bit] pci 0000:00:0d.2: reg 0x18: [mem 0x8fa80000-0x8fa80fff 64bit] pci 0000:00:0d.2: supports D1 D2 [ 0.172940] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173554] pci 0000:00:14.0: [8086:38ed] type 00 class 0x0c0330 [ 0.173598] pci 0000:00:14.0: reg 0x10: [mem 0x8fa20000-0x8fa2ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.173862] pci 0000:00:14.2: [8086:38ef] type 00 class 0x050000 [ 0.173891] pci 0000:00:14.2: reg 0x10: [mem 0x8fa34000-0x8fa35fff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0x8fa36000-0x8fa36fff 64bit] pci 0000:00:16.0: [8086:38e0] type 00 class 0x078000 [ 0.174164] pci 0000:00:16.0: reg 0x10: [mem 0x8fa37000-0x8fa37fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.174549] pci 0000:00:1c.0: [8086:38b8] type 01 class 0x060400 [ 0.174725] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.174815] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.175176] pci 0000:00:1c.4: [8086:38bc] type 01 class 0x060400 [ 0.175378] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.175454] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity [ 0.175791] pci 0000:00:1f.0: [8086:3887] type 00 class 0x060100 [ 0.176103] pci 0000:00:1f.3: [8086:38c8] type 00 class 0x040300 [ 0.176171] pci 0000:00:1f.3: reg 0x10: [mem 0x8fa30000-0x8fa33fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0x00000000-0x000fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.176751] pci 0000:00:1f.4: [8086:38a3] type 00 class 0x0c0500 [ 0.176806] pci 0000:00:1f.4: reg 0x10: [mem 0x8fa38000-0x8fa380ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0x8000-0x801f] pci 0000:00:1f.5: [8086:38a4] type 00 class 0x0c8000 [ 0.177128] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] pci 0000:00:07.0: PCI bridge to [bus 01-39] pci 0000:00:07.0: bridge window [io 0x4000-0x5fff] pci 0000:00:07.0: bridge window [mem 0x81a00000-0x889fffff] pci 0000:00:07.0: bridge window [mem 0xa1300000-0xa82fffff 64bit pref] pci 0000:00:07.1: PCI bridge to [bus 3a-72] pci 0000:00:07.1: bridge window [io 0x6000-0x7fff] pci 0000:00:07.1: bridge window [mem 0x88a00000-0x8f9fffff] pci 0000:00:07.1: bridge window [mem 0xa8300000-0xaf2fffff 64bit pref] pci 0000:73:00.0: [14e4:4488] type 00 class 0x028000 [ 0.177820] pci 0000:73:00.0: reg 0x10: [mem 0x81800000-0x8180ffff 64bit] pci 0000:73:00.0: reg 0x18: [mem 0x81000000-0x813fffff 64bit] pci 0000:73:00.0: supports D1 D2 [ 0.178064] pci 0000:73:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178938] pci 0000:73:00.1: [14e4:5fa0] type 00 class 0x028000 [ 0.178969] pci 0000:73:00.1: reg 0x10: [mem 0x81810000-0x81817fff 64bit] pci 0000:73:00.1: reg 0x18: [mem 0x81400000-0x817fffff 64bit] pci 0000:73:00.1: supports D1 D2 [ 0.179210] pci 0000:73:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179882] pci 0000:00:1c.0: PCI bridge to [bus 73] pci 0000:00:1c.0: bridge window [mem 0x81000000-0x818fffff] pci 0000:74:00.0: [106b:2005] type 00 class 0x018002 [ 0.180180] pci 0000:74:00.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit pref] pci 0000:74:00.0: reg 0x18: [mem 0xa1000000-0xa107ffff 64bit pref] pci 0000:74:00.0: reg 0x20: [mem 0xa1200000-0xa120ffff 64bit pref] pci 0000:74:00.0: PME# supported from D0 D3hot D3cold [ 0.180791] pci 0000:74:00.1: [106b:1801] type 00 class 0x000000 [ 0.180819] pci 0000:74:00.1: reg 0x10: [mem 0xa0400000-0xa07fffff 64bit pref] pci 0000:74:00.1: reg 0x18: [mem 0xa1080000-0xa10fffff 64bit pref] pci 0000:74:00.1: reg 0x20: [mem 0xa1210000-0xa121ffff 64bit pref] pci 0000:74:00.1: PME# supported from D0 D3hot D3cold [ 0.181300] pci 0000:74:00.2: [106b:1802] type 00 class 0x000000 [ 0.181329] pci 0000:74:00.2: reg 0x10: [mem 0xa0800000-0xa0bfffff 64bit pref] pci 0000:74:00.2: reg 0x18: [mem 0xa1100000-0xa117ffff 64bit pref] pci 0000:74:00.2: reg 0x20: [mem 0xa1220000-0xa122ffff 64bit pref] pci 0000:74:00.2: PME# supported from D0 D3hot D3cold [ 0.181815] pci 0000:74:00.3: [106b:1803] type 00 class 0x040100 [ 0.181840] pci 0000:74:00.3: reg 0x10: [mem 0xa0c00000-0xa0ffffff 64bit pref] pci 0000:74:00.3: reg 0x18: [mem 0xa1180000-0xa11fffff 64bit pref] pci 0000:74:00.3: reg 0x20: [mem 0xa1230000-0xa123ffff 64bit pref] pci 0000:74:00.3: PME# supported from D0 D3hot D3cold [ 0.182282] pci 0000:00:1c.4: PCI bridge to [bus 74] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xa12fffff 64bit pref] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.183948] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.184116] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.184259] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.184428] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.184566] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.184705] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.184842] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.185440] ACPI: EC: interrupt unblocked [ 0.185442] ACPI: EC: event unblocked [ 0.185560] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.185562] ACPI: EC: GPE=0x6e [ 0.185564] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete [ 0.185567] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events [ 0.185785] iommu: Default domain type: Translated [ 0.185785] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.185785] SCSI subsystem initialized [ 0.185785] libata version 3.00 loaded. [ 0.185785] ACPI: bus type USB registered [ 0.185785] usbcore: registered new interface driver usbfs [ 0.185785] usbcore: registered new interface driver hub [ 0.185785] usbcore: registered new device driver usb [ 0.185785] pps_core: LinuxPPS API ver. 1 registered [ 0.185785] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.185785] PTP clock support registered [ 0.185785] EDAC MC: Ver: 3.0.0 [ 0.185785] Registered efivars operations [ 0.185785] NetLabel: Initializing [ 0.185785] NetLabel: domain hash size = 128 [ 0.185785] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.185785] NetLabel: unlabeled traffic allowed by default [ 0.185785] mctp: management component transport protocol core [ 0.185785] NET: Registered PF_MCTP protocol family [ 0.185785] PCI: Using ACPI for IRQ routing [ 0.205372] PCI: pci_cache_line_size set to 64 bytes [ 0.205827] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x58f04698-0x5bffffff] e820: reserve RAM buffer [mem 0x605b3000-0x63ffffff] e820: reserve RAM buffer [mem 0x61235000-0x63ffffff] e820: reserve RAM buffer [mem 0x6157e000-0x63ffffff] e820: reserve RAM buffer [mem 0x73c7f000-0x73ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.205854] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.205854] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.205854] vgaarb: loaded [ 0.207209] clocksource: Switched to clocksource tsc-early [ 0.223070] VFS: Disk quotas dquot_6.6.0 [ 0.223104] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.223278] AppArmor: AppArmor Filesystem Enabled [ 0.223307] pnp: PnP ACPI init [ 0.223640] system 00:00: [io 0xffff] has been reserved [ 0.223645] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.223648] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.223888] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.223891] system 00:01: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.223894] system 00:01: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.223896] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.223898] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.223901] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.223904] system 00:01: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.223906] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved [ 0.223908] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.223911] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.223913] system 00:01: [mem 0xfe010000-0xfe010fff] has been reserved [ 0.223916] system 00:01: [mem 0xfe036000-0xfe03bfff] could not be reserved [ 0.223918] system 00:01: [mem 0xfe03c000-0xfe03cfff] has been reserved [ 0.223921] system 00:01: [mem 0xfc800000-0xfcffffff] has been reserved [ 0.223923] system 00:01: [mem 0xfe100000-0xfe1fffff] has been reserved [ 0.223925] system 00:01: [mem 0xfe200000-0xfe3fffff] has been reserved [ 0.224874] pnp: PnP ACPI: found 2 devices [ 0.226460] pci 0000:00:02.0: assigning 10 device properties [ 0.226480] pci 0000:00:0d.2: assigning 9 device properties [ 0.231013] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.231099] NET: Registered PF_INET protocol family [ 0.231253] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.233915] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.233961] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.234050] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.234399] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.234678] TCP: Hash tables configured (established 65536 bind 65536) [ 0.234774] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.234819] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.234850] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.234909] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.234921] NET: Registered PF_XDP protocol family [ 0.234946] pci 0000:00:1f.3: BAR 4: assigned [mem 0x4000000000-0x40000fffff 64bit] pci 0000:00:07.0: PCI bridge to [bus 01-39] pci 0000:00:07.0: bridge window [io 0x4000-0x5fff] pci 0000:00:07.0: bridge window [mem 0x81a00000-0x889fffff] pci 0000:00:07.0: bridge window [mem 0xa1300000-0xa82fffff 64bit pref] pci 0000:00:07.1: PCI bridge to [bus 3a-72] pci 0000:00:07.1: bridge window [io 0x6000-0x7fff] pci 0000:00:07.1: bridge window [mem 0x88a00000-0x8f9fffff] pci 0000:00:07.1: bridge window [mem 0xa8300000-0xaf2fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 73] pci 0000:00:1c.0: bridge window [mem 0x81000000-0x818fffff] pci 0000:00:1c.4: PCI bridge to [bus 74] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xa12fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfeafffff window] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff] pci_bus 0000:01: resource 1 [mem 0x81a00000-0x889fffff] pci_bus 0000:01: resource 2 [mem 0xa1300000-0xa82fffff 64bit pref] pci_bus 0000:3a: resource 0 [io 0x6000-0x7fff] pci_bus 0000:3a: resource 1 [mem 0x88a00000-0x8f9fffff] pci_bus 0000:3a: resource 2 [mem 0xa8300000-0xaf2fffff 64bit pref] pci_bus 0000:73: resource 1 [mem 0x81000000-0x818fffff] pci_bus 0000:74: resource 2 [mem 0xa0000000-0xa12fffff 64bit pref] PCI: CLS 256 bytes, default 64 [ 0.236073] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.236075] software IO TLB: mapped [mem 0x0000000054f04000-0x0000000058f04000] (64MB) [ 0.236143] Trying to unpack rootfs image as initramfs... [ 0.236379] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x100d48ce7a0, max_idle_ns: 440795212195 ns [ 0.236402] clocksource: Switched to clocksource tsc [ 0.236456] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.237432] Initialise system trusted keyrings [ 0.237447] Key type blacklist registered [ 0.237561] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.241191] zbud: loaded [ 0.241960] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.242331] fuse: init (API version 7.37) [ 0.242640] integrity: Platform Keyring initialized [ 0.242651] integrity: Machine keyring initialized [ 0.264159] Key type asymmetric registered [ 0.264164] Asymmetric key parser 'x509' registered [ 1.102287] Freeing initrd memory: 114148K [ 1.105652] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.105685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.105714] io scheduler mq-deadline registered [ 1.106046] pcieport 0000:00:07.0: can't derive routing for PCI INT A [ 1.106048] pcieport 0000:00:07.0: PCI INT A: not connected [ 1.106109] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.106355] pcieport 0000:00:07.1: can't derive routing for PCI INT B [ 1.106357] pcieport 0000:00:07.1: PCI INT B: not connected [ 1.106398] pcieport 0000:00:07.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.106822] pcieport 0000:00:1c.0: AER: enabled with IRQ 124 [ 1.106885] pcieport 0000:00:1c.0: DPC: enabled with IRQ 124 [ 1.106886] pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 1.107297] pcieport 0000:00:1c.4: AER: enabled with IRQ 125 [ 1.107364] pcieport 0000:00:1c.4: DPC: enabled with IRQ 125 [ 1.107365] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 1.107512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.107735] Monitor-Mwait will be used to enter C-1 state [ 1.107742] Monitor-Mwait will be used to enter C-2 state [ 1.107748] Monitor-Mwait will be used to enter C-3 state [ 1.107751] ACPI: \_SB_.PR00: Found 3 idle states [ 1.108005] ACPI: AC: AC Adapter [ADP1] (on-line) [ 1.108046] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.108077] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.108104] ACPI: button: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.108129] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.108162] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.109773] Linux agpgart interface v0.103 [ 1.110761] loop: module loaded [ 1.110943] tun: Universal TUN/TAP device driver, 1.6 [ 1.110968] PPP generic driver version 2.4.2 [ 1.111007] VFIO - User Level meta-driver version: 0.3 [ 1.111101] i8042: PNP: No PS/2 controller found. [ 1.111136] mousedev: PS/2 mouse device common for all mice [ 1.111230] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.111951] rtc_cmos rtc_cmos: registered as rtc0 [ 1.112106] rtc_cmos rtc_cmos: setting system clock to 2023-12-29T05:39:52 UTC (1703828392) [ 1.112147] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 1.112151] i2c_dev: i2c /dev entries driver [ 1.112210] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.112229] device-mapper: uevent: version 1.0.3 [ 1.112264] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 1.112275] platform eisa.0: Probing EISA bus 0 [ 1.112277] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.112278] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.112279] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.112279] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.112280] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.112281] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.112282] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.112283] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.112283] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.112284] platform eisa.0: EISA: Detected 0 cards [ 1.112288] intel_pstate: Intel P-state driver initializing [ 1.112470] intel_pstate: HWP enabled [ 1.112491] ledtrig-cpu: registered to indicate activity on CPUs [ 1.112509] efifb: probing for efifb [ 1.112521] efifb: No BGRT, not showing boot graphics [ 1.112522] efifb: framebuffer at 0x90000000, using 20252k, total 20250k [ 1.112523] efifb: mode is 2880x1800x32, linelength=11520, pages=1 [ 1.112524] efifb: scrolling: redraw [ 1.112525] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.112551] fbcon: Deferring console take-over [ 1.112552] fb0: EFI VGA frame buffer device [ 1.112609] intel_pmc_core intel_pmc_core.0: initialized [ 1.112655] drop_monitor: Initializing network drop monitor service [ 1.112771] NET: Registered PF_INET6 protocol family [ 1.115216] Segment Routing with IPv6 [ 1.115227] In-situ OAM (IOAM) with IPv6 [ 1.115251] NET: Registered PF_PACKET protocol family [ 1.115275] Key type dns_resolver registered [ 1.115528] microcode: sig=0x706e5, pf=0x80, revision=0xc2 [ 1.115542] microcode: Microcode Update Driver: v2.2. [ 1.115547] IPI shorthand broadcast: enabled [ 1.115569] sched_clock: Marking stable (1109218166, 6252123)->(1146081936, -30611647) [ 1.115693] registered taskstats version 1 [ 1.115734] Loading compiled-in X.509 certificates [ 1.116319] Loaded X.509 cert 'Build time autogenerated kernel key: a7eed5ee01dc5c3940d3ea3cb6f4b4768179f4ab' [ 1.116483] zswap: loaded using pool lzo/zbud [ 1.116557] Key type .fscrypt registered [ 1.116558] Key type fscrypt-provisioning registered [ 1.118676] Key type encrypted registered [ 1.118684] AppArmor: AppArmor sha1 policy hashing enabled [ 1.118692] integrity: Reading UEFI Secure Boot Certs is not supported on T2 Macs. [ 1.118696] ima: No TPM chip found, activating TPM-bypass! [ 1.118698] Loading compiled-in module X.509 certificates [ 1.119185] Loaded X.509 cert 'Build time autogenerated kernel key: a7eed5ee01dc5c3940d3ea3cb6f4b4768179f4ab' [ 1.119186] ima: Allocated hash algorithm: sha1 [ 1.119192] ima: No architecture policies found [ 1.119200] evm: Initialising EVM extended attributes: [ 1.119201] evm: security.selinux [ 1.119201] evm: security.SMACK64 [ 1.119202] evm: security.SMACK64EXEC [ 1.119202] evm: security.SMACK64TRANSMUTE [ 1.119203] evm: security.SMACK64MMAP [ 1.119203] evm: security.apparmor [ 1.119204] evm: security.ima [ 1.119204] evm: security.capability [ 1.119205] evm: HMAC attrs: 0x1 [ 1.120124] PM: Magic number: 3:877:669 [ 1.120293] RAS: Correctable Errors collector initialized. [ 1.126837] Freeing unused decrypted memory: 2036K [ 1.127188] Freeing unused kernel image (initmem) memory: 3168K [ 1.166537] Write protecting the kernel read-only data: 26624k [ 1.167382] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.167507] Freeing unused kernel image (rodata/data gap) memory: 248K [ 1.186413] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.186418] Run /init as init process [ 1.186419] with arguments: [ 1.186421] /init [ 1.186421] splash [ 1.186422] with environment: [ 1.186423] HOME=/ [ 1.186423] TERM=linux [ 1.186424] BOOT_IMAGE=/boot/vmlinuz-6.1.69-t2-jammy [ 1.536786] intel-lpss INT34BA:00: error -ENXIO: IRQ index 0 not found [ 1.537001] intel-lpss: probe of INT34BA:00 failed with error -22 [ 1.549127] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.549139] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 1.550201] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000200009810 [ 1.550511] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.550515] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 1.550518] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.550703] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.550706] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.550708] usb usb1: Product: xHCI Host Controller [ 1.550710] usb usb1: Manufacturer: Linux 6.1.69-t2-jammy xhci-hcd [ 1.550712] usb usb1: SerialNumber: ... [ 1.550856] hub 1-0:1.0: USB hub found [ 1.550864] hub 1-0:1.0: 1 port detected [ 1.551143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.551146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.551148] usb usb2: Product: xHCI Host Controller [ 1.551150] usb usb2: Manufacturer: Linux 6.1.69-t2-jammy xhci-hcd [ 1.551151] usb usb2: SerialNumber: ... [ 1.551556] hub 2-0:1.0: USB hub found [ 1.551565] hub 2-0:1.0: 4 ports detected [ 1.552100] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.552105] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.553258] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810 [ 1.553670] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.553675] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.553678] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.554064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.554068] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.554070] usb usb3: Product: xHCI Host Controller [ 1.554071] usb usb3: Manufacturer: Linux 6.1.69-t2-jammy xhci-hcd [ 1.554073] usb usb3: SerialNumber: ... [ 1.554192] hub 3-0:1.0: USB hub found [ 1.554471] hub 3-0:1.0: 8 ports detected [ 1.555678] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.555681] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.555682] usb usb4: Product: xHCI Host Controller [ 1.555683] usb usb4: Manufacturer: Linux 6.1.69-t2-jammy xhci-hcd [ 1.555684] usb usb4: SerialNumber: ... [ 1.555889] hub 4-0:1.0: USB hub found [ 1.556050] hub 4-0:1.0: 6 ports detected [ 1.559087] ACPI: bus type thunderbolt registered [ 1.559253] thunderbolt 0000:00:0d.2: can't derive routing for PCI INT A [ 1.559255] thunderbolt 0000:00:0d.2: PCI INT A: not connected [ 1.573923] ACPI: bus type drm_connector registered [ 1.575330] cryptd: max_cpu_qlen set to 1000 [ 1.575554] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.575688] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.578493] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.581782] nvme nvme0: pci function 0000:74:00.0 [ 1.587284] nvme nvme0: 1/0/0 default/read/poll queues [ 1.587491] nvme nvme0: Identify NS List failed (status=0xb) [ 1.589300] nvme0n1: p1 p2 p3 [ 1.615032] AVX2 version of gcm_enc/dec engaged. [ 1.615060] AES CTR mode by8 optimization enabled [ 1.802236] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.802297] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 1.803917] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.804310] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) [ 1.814301] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.965507] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.13 [ 1.965515] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.965518] usb 3-1: Product: USB2.0 Hub [ 1.965520] usb 3-1: Manufacturer: VIA Labs, Inc. [ 1.965522] usb 3-1: SerialNumber: ... [ 1.966587] hub 3-1:1.0: USB hub found [ 1.966856] hub 3-1:1.0: 4 ports detected [ 2.029002] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.118178] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.13 [ 2.118186] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.118189] usb 2-1: Product: USB3.0 Hub [ 2.118191] usb 2-1: Manufacturer: VIA Labs, Inc. [ 2.118193] usb 2-1: SerialNumber: ... [ 2.119073] hub 2-1:1.0: USB hub found [ 2.119215] hub 2-1:1.0: 4 ports detected [ 2.718294] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 2.766389] usb 2-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.787658] usb 2-1.2: New USB device found, idVendor=2537, idProduct=1081, bcdDevice= 1.00 [ 2.787666] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.787669] usb 2-1.2: Product: NS1081 [ 2.787671] usb 2-1.2: Manufacturer: Norelsys [ 2.787673] usb 2-1.2: SerialNumber: ... [ 2.871914] usb 3-1.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 2.871922] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.871925] usb 3-1.1: Product: USB2.0 Hub [ 2.872993] hub 3-1.1:1.0: USB hub found [ 2.873330] hub 3-1.1:1.0: 4 ports detected [ 2.977135] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 2.978418] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.984098] ACPI: video: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 2.986132] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 2.986374] scsi host0: usb-storage 2-1.2:1.0 [ 2.986592] usbcore: registered new interface driver usb-storage [ 2.988792] usbcore: registered new interface driver uas [ 2.989745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.990959] acpi device:11: registered as cooling_device4 [ 2.995621] fbcon: i915drmfb (fb0) is primary device [ 2.995623] fbcon: Deferring console take-over [ 2.995626] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.058403] usb 2-1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 3.079148] usb 2-1.4: New USB device found, idVendor=0bc2, idProduct=aa16, bcdDevice= 1.00 [ 3.079151] usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 3.079152] usb 2-1.4: Product: BarracudaFastSSD [ 3.079153] usb 2-1.4: Manufacturer: Seagate [ 3.079154] usb 2-1.4: SerialNumber: ... [ 3.082128] scsi host1: uas [ 3.082626] scsi 1:0:0:0: Direct-Access Seagate BarracudaFastSSD 0002 PQ: 0 ANSI: 6 [ 3.083953] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.084205] sd 1:0:0:0: [sda] 976773167 512-byte logical blocks: (500 GB/466 GiB) [ 3.084453] sd 1:0:0:0: [sda] Write Protect is off [ 3.084456] sd 1:0:0:0: [sda] Mode Sense: 4f 00 00 00 [ 3.084702] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.084863] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.084864] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 3.093198] sda: sda1 sda2 sda3 [ 3.093338] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.162304] usb 3-1.1.2: new full-speed USB device number 4 using xhci_hcd [ 3.174255] raid6: avx512x4 gen() 45913 MB/s [ 3.242254] raid6: avx512x2 gen() 43839 MB/s [ 3.264807] usb 3-1.1.2: New USB device found, idVendor=25a7, idProduct=fa61, bcdDevice= 6.20 [ 3.264811] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.264812] usb 3-1.1.2: Product: 2.4G Receiver [ 3.264814] usb 3-1.1.2: Manufacturer: Compx [ 3.273990] hid: raw HID events driver (C) Jiri Kosina [ 3.279417] usbcore: registered new interface driver usbhid [ 3.279427] usbhid: USB HID core driver [ 3.281614] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/0003:25A7:FA61.0001/input/input5 [ 3.310255] raid6: avx512x1 gen() 36627 MB/s [ 3.338386] hid-generic 0003:25A7:FA61.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-1.1.2/input0 [ 3.338695] input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:25A7:FA61.0002/input/input6 [ 3.338826] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:25A7:FA61.0002/input/input7 [ 3.338937] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:25A7:FA61.0002/input/input8 [ 3.350292] usb 3-1.1.4: new high-speed USB device number 5 using xhci_hcd [ 3.378255] raid6: avx2x4 gen() 30795 MB/s [ 3.398364] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:25A7:FA61.0002/input/input9 [ 3.398506] hid-generic 0003:25A7:FA61.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-1.1.2/input1 [ 3.446255] raid6: avx2x2 gen() 30244 MB/s [ 3.453011] usb 3-1.1.4: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice=13.04 [ 3.453015] usb 3-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.453017] usb 3-1.1.4: Product: iPhone [ 3.453019] usb 3-1.1.4: Manufacturer: Apple Inc. [ 3.453020] usb 3-1.1.4: SerialNumber: ... [ 3.514254] raid6: avx2x1 gen() 24697 MB/s [ 3.514258] raid6: using algorithm avx512x4 gen() 45913 MB/s [ 3.582255] raid6: .... xor() 15763 MB/s, rmw enabled [ 3.582257] raid6: using avx512x2 recovery algorithm [ 3.583309] xor: automatically using best checksumming function avx [ 3.584175] async_tx: api initialized (async) [ 3.762135] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 3.990655] scsi 0:0:0:0: Direct-Access NORELSYS 1081CS0 PQ: 0 ANSI: 6 [ 3.991018] scsi 0:0:0:1: Direct-Access NORELSYS 1081CS1 PQ: 0 ANSI: 6 [ 3.991180] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 3.991377] sd 0:0:0:1: Attached scsi generic sg2 type 0 [ 3.991467] sd 0:0:0:0: [sdb] Media removed, stopped polling [ 3.991672] sd 0:0:0:1: [sdc] Media removed, stopped polling [ 3.992091] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 3.992279] sd 0:0:0:1: [sdc] Attached SCSI removable disk [ 6.017416] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 6.673334] pstore: Using crash dump compression: deflate [ 6.676213] pstore: Registered efi as persistent store backend [ 6.694461] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 6.724799] lp: driver loaded but no devices found [ 6.735992] ppdev: user-space parallel port driver [ 6.873932] apple_bce: module is from the staging directory, the quality is unknown, you have been warned. [ 6.874870] apple-bce: capturing our device [ 6.875420] apple-bce: handshake done [ 6.876429] bce-vhci bce-vhci: BCE VHCI Host Controller [ 6.876434] bce-vhci bce-vhci: new USB bus registered, assigned bus number 5 [ 6.878645] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 6.878650] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 6.878651] usb usb5: Product: BCE VHCI Host Controller [ 6.878652] usb usb5: Manufacturer: Linux 6.1.69-t2-jammy bce-vhci [ 6.878654] usb usb5: SerialNumber: ... [ 6.878814] hub 5-0:1.0: USB hub found [ 6.878829] hub 5-0:1.0: 10 ports detected [ 6.884192] bce-vhci: Unhandled system event: 18 s=0 p1=5 p2=402a5 [ 6.889619] aaudio: capturing our device [ 6.889642] aaudio 0000:74:00.3: enabling device (0000 -> 0002) [ 6.889790] aaudio aaudio: aaudio: bs len = 400000 [ 6.890064] aaudio aaudio: Received boot notification from remote [ 6.892633] bce-vhci: Unhandled system event: 18 s=0 p1=3 p2=40285 [ 6.895756] bce-vhci: Unhandled system event: 18 s=0 p1=4 p2=40285 [ 6.897807] bce-vhci: Unhandled system event: 18 s=0 p1=1 p2=40285 [ 6.900475] aaudio aaudio: Received alive notification from remote [ 6.900482] aaudio aaudio: Continuing init [ 6.901332] aaudio aaudio: Received alive notification from remote [ 6.903501] bce-vhci: Unhandled system event: 18 s=0 p1=6 p2=40285 [ 6.904607] aaudio aaudio: Remote device 21 Digital Mic [ 6.910603] aaudio aaudio: Remote device 25 Codec Output [ 6.916523] aaudio aaudio: Remote device 39 Speaker [ 6.920378] aaudio aaudio: Remote device 3f Bridge Loopback [ 6.925439] bce-vhci: Unhandled system event: 18 s=0 p1=2 p2=40285 [ 6.925747] aaudio aaudio: Remote device 44 Codec Input [ 6.929048] aaudio aaudio: aaudio: BufferStruct ver = 3 [ 6.929052] aaudio aaudio: aaudio: Num devices = 3 [ 6.929054] aaudio aaudio: aaudio: Device 0 Bridge Loopback [ 6.929134] aaudio aaudio: aaudio: Device 0 Stream 0: Output; Buffer Count = 1 [ 6.929147] aaudio aaudio: aaudio: Device 1 Speaker [ 6.929191] aaudio aaudio: aaudio: Device 1 Stream 0: Output; Buffer Count = 1 [ 6.929203] aaudio aaudio: aaudio: Device 2 Codec Output [ 6.929265] aaudio aaudio: aaudio: Device 2 Stream 0: Output; Buffer Count = 1 [ 6.929278] aaudio aaudio: aaudio: Created device 3 Digital Mic [ 6.929281] aaudio aaudio: aaudio: Created device 4 Codec Input [ 6.929283] aaudio aaudio: aaudio: Device 3 Host Stream; Input [ 6.929845] aaudio aaudio: aaudio: Device 0 Host Stream; Input [ 6.930553] aaudio aaudio: aaudio: Device 4 Host Stream; Input [ 6.942671] input: Apple T2 Audio Codec Output as /devices/pci0000:00/0000:00:1c.4/0000:74:00.3/aaudio/aaudio/card0/input11 [ 6.998694] bce_vhci_reset_device 3 [ 7.126277] usb 5-3: new high-speed USB device number 2 using apple-bce [ 7.126285] bce_vhci_enable_device [ 7.126847] bce_vhci_cmd_device_create 3 -> 1 [ 7.129368] bce_vhci_reset_device 3 [ 7.129372] bce-vhci: Not implemented: wait for pending output requests [ 7.151106] acpi-tad ACPI000E:00: Missing _PRW [ 7.190906] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10 [ 7.258269] bce_vhci_enable_device [ 7.284945] usb 5-3: New USB device found, idVendor=05ac, idProduct=8262, bcdDevice= 2.01 [ 7.284952] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.284955] usb 5-3: Product: Ambient Light Sensor [ 7.284957] usb 5-3: Manufacturer: Apple Inc. [ 7.284959] usb 5-3: SerialNumber: ... [ 7.295338] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 7.310956] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.314823] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.315493] hid-generic 0003:05AC:8262.0003: hiddev1,hidraw2: USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0 [ 7.326863] bce_vhci_reset_device 5 [ 7.386063] Bluetooth: Core ver 2.22 [ 7.386087] NET: Registered PF_BLUETOOTH protocol family [ 7.386089] Bluetooth: HCI device and connection manager initialized [ 7.386095] Bluetooth: HCI socket layer initialized [ 7.386098] Bluetooth: L2CAP socket layer initialized [ 7.386103] Bluetooth: SCO socket layer initialized [ 7.409127] wl: loading out-of-tree module taints kernel. [ 7.409135] wl: module license 'MIXED/Proprietary' taints kernel. [ 7.409137] Disabling lock debugging due to kernel taint [ 7.412019] wl: module verification failed: signature and/or required key missing - tainting kernel [ 7.417696] usbcore: registered new device driver apple-mfi-fastcharge [ 7.433171] hci_bcm4377 0000:73:00.1: can't disable ASPM; OS doesn't have ASPM control [ 7.435091] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 7.435735] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.458270] usb 5-5: new high-speed USB device number 3 using apple-bce [ 7.458277] bce_vhci_enable_device [ 7.458758] bce_vhci_cmd_device_create 5 -> 2 [ 7.461872] bce_vhci_reset_device 5 [ 7.461877] bce-vhci: Not implemented: wait for pending output requests [ 7.496087] spi-nor spi0.0: unrecognized JEDEC id bytes: f4 0c 58 12 03 00 [ 7.498144] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input12 [ 7.518882] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present) [ 7.520811] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13 [ 7.529570] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14 [ 7.536341] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input15 [ 7.594272] bce_vhci_enable_device [ 7.612998] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 7.613004] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 7.613006] RAPL PMU: hw unit of domain package 2^-14 Joules [ 7.613007] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 7.620609] usb 5-5: New USB device found, idVendor=05ac, idProduct=0280, bcdDevice= 9.20 [ 7.620617] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.620620] usb 5-5: Product: Apple Internal Keyboard / Trackpad [ 7.620623] usb 5-5: Manufacturer: Apple Inc. [ 7.620626] usb 5-5: SerialNumber: ... [ 7.646290] hci_bcm4377 0000:73:00.1: enabling device (0000 -> 0002) [ 7.754747] applesmc: key=821 fan=1 temp=34 index=32 acc=0 lux=0 kbd=0 [ 7.754870] applesmc APP0001:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 7.833803] intel_tcc_cooling: Programmable TCC Offset detected [ 7.923275] intel_rapl_common: Found RAPL domain package [ 7.923281] intel_rapl_common: Found RAPL domain core [ 7.923285] intel_rapl_common: Found RAPL domain uncore [ 7.960621] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 8.136547] input: bcm5974 as /devices/pci0000:00/0000:00:1c.4/0000:74:00.1/apple-bce/apple-bce/bce-vhci/usb5/5-5/5-5:1.2/input/input16 [ 8.161724] apple 0003:05AC:0280.0004: hiddev1,hidraw2: USB HID v1.01 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-bce-vhci-5/input0 [ 8.161992] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1c.4/0000:74:00.1/apple-bce/apple-bce/bce-vhci/usb5/5-5/5-5:1.1/0003:05AC:0280.0005/input/input17 [ 8.170359] usbcore: registered new interface driver bcm5974 [ 8.240810] apple 0003:05AC:0280.0005: input,hiddev2,hidraw3: USB HID v1.01 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-bce-vhci-5/input1 [ 8.246142] apple 0003:05AC:0280.0006: hiddev3,hidraw4: USB HID v1.01 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-bce-vhci-5/input3 [ 8.246391] apple 0003:05AC:0280.0007: hiddev4,hidraw5: USB HID v1.01 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-bce-vhci-5/input4 [ 8.295373] ================================================================================ [ 8.295384] UBSAN: shift-out-of-bounds in lib/bitmap.c:1262:16 [ 8.295389] shift exponent 128 is too large for 32-bit type 'int' [ 8.295398] Hardware name: Apple Inc. MacBookAir9,1/Mac-0CFF9C7C2B63DF8D, BIOS XXX.XXX.XXX.XXX.0 (iBridge: XXX.XXX.XXX.XXX.0,0) 11/11/2023 [ 8.295400] Call Trace: [ 8.295403] <IRQ> [ 8.295408] dump_stack_lvl+0x49/0x6d [ 8.295419] dump_stack+0x10/0x18 [ 8.295423] ubsan_epilogue+0x9/0x3a [ 8.295429] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef [ 8.295434] ? prepare_creds+0xa1/0x290 [ 8.295439] ? try_to_wake_up+0x28a/0x660 [ 8.295444] __reg_op.cold+0x14/0x38 [ 8.295447] bitmap_release_region+0xe/0x20 [ 8.295456] bcm4377_handle_ack+0x8c/0x100 [hci_bcm4377] bcm4377_poll_completion_ring+0x1ae/0x2e0 [hci_bcm4377] ? ttwu_do_activate+0x82/0x100 [ 8.295476] bcm4377_irq+0x77/0x120 [hci_bcm4377] __handle_irq_event_percpu+0x4c/0x1a0 [ 8.295487] handle_irq_event+0x39/0x80 [ 8.295490] handle_edge_irq+0x8c/0x250 [ 8.295494] __common_interrupt+0x4f/0xf0 [ 8.295500] common_interrupt+0x9f/0xb0 [ 8.295520] </IRQ> [ 8.295522] <TASK> [ 8.295523] asm_common_interrupt+0x27/0x40 [ 8.295529] RIP: 0010:close_fd+0x18/0x70 [ 8.295536] Code: 0f f1 ff eb c2 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 65 48 8b 04 25 80 fb 01 00 48 89 e5 41 56 41 55 41 54 <4c> 8b a8 f0 0b 00 00 41 89 fc 4d 8d b5 80 00 00 00 4c 89 f7 e8 ef [ 8.295539] RSP: 0018:ffffb0eb408e7ee0 EFLAGS: 00000206 [ 8.295544] RAX: ffff8a0c012c2000 RBX: 0000000000000000 RCX: 0000000000000000 [ 8.295546] RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 000000000000000f [ 8.295548] RBP: ffffb0eb408e7ef8 R08: 0000000000000000 R09: 0000000000000000 [ 8.295550] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb0eb408e7f58 [ 8.295552] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 8.295557] __x64_sys_close+0x11/0x50 [ 8.295560] do_syscall_64+0x59/0x90 [ 8.295565] ? do_syscall_64+0x69/0x90 [ 8.295569] ? do_syscall_64+0x69/0x90 [ 8.295573] ? do_syscall_64+0x69/0x90 [ 8.295577] entry_SYSCALL_64_after_hwframe+0x64/0xce [ 8.295581] RIP: 0033:0x7f3e91514d77 [ 8.295585] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 63 bc f7 ff [ 8.295587] RSP: 002b:00007ffe5f75fbc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 8.295591] RAX: ffffffffffffffda RBX: 00007f3e916886c0 RCX: 00007f3e91514d77 [ 8.295593] RDX: 00007ffe5f75fc80 RSI: 0000000000000001 RDI: 000000000000000f [ 8.295595] RBP: 000000000000000f R08: 0000000000000001 R09: 006563622d656c70 [ 8.295597] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000002 [ 8.295599] R13: 000000000000000f R14: 0000557519bf63f3 R15: 0000000000000000 [ 8.295603] </TASK> [ 8.295604] ================================================================================ [ 9.512562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.512568] Bluetooth: BNEP filters: protocol multicast [ 9.512573] Bluetooth: BNEP socket layer initialized [ 9.515564] Bluetooth: MGMT ver 1.22 [ 9.540613] NET: Registered PF_ALG protocol family [ 9.680654] loop0: detected capacity change from 0 to 8 [ 9.766700] ipheth 3-1.1.4:4.2: Apple iPhone USB Ethernet device attached [ 9.766741] usbcore: registered new interface driver ipheth [ 9.774854] ipheth 3-1.1.4:4.2 enxdabe1f5d928e: renamed from eth0 [ 11.844463] aaudio_pcm_pointer while not started [ 11.844487] aaudio_pcm_pointer while not started [ 11.894841] IPv6: ADDRCONF(NETDEV_CHANGE): enxdabe1f5d928e: link becomes ready [ 12.268741] Bluetooth: RFCOMM TTY layer initialized [ 12.268754] Bluetooth: RFCOMM socket layer initialized [ 12.268760] Bluetooth: RFCOMM ver 1.11 [ 20.308115] aaudio_pcm_pointer while not started [ 20.308133] aaudio_pcm_pointer while not started [ 20.308239] aaudio_pcm_pointer while not started [ 20.308242] aaudio_pcm_pointer while not started [ 20.308278] aaudio_pcm_pointer while not started [ 20.308280] aaudio_pcm_pointer while not started [ 20.308289] aaudio_pcm_pointer while not started [ 20.308302] aaudio_pcm_pointer while not started [ 20.308304] aaudio_pcm_pointer while not started [ 20.308306] aaudio_pcm_pointer while not started [ 70.112460] usbcore: registered new interface driver brcmfmac [ 70.112505] brcmfmac 0000:73:00.0: enabling device (0000 -> 0002) [ 70.219875] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4377b3-pcie for chip BCM4377/4 [ 70.220826] brcmfmac 0000:73:00.0: Direct firmware load for brcm/brcmfmac4377b3-pcie.apple,fiji-SPPR-u-3.1-X0.bin failed with error -2 [ 70.220930] brcmfmac 0000:73:00.0: Direct firmware load for brcm/brcmfmac4377b3-pcie.apple,fiji-SPPR-u-3.1.bin failed with error -2 [ 70.221007] brcmfmac 0000:73:00.0: Direct firmware load for brcm/brcmfmac4377b3-pcie.apple,fiji-SPPR-u.bin failed with error -2 [ 70.221087] brcmfmac 0000:73:00.0: Direct firmware load for brcm/brcmfmac4377b3-pcie.apple,fiji-SPPR.bin failed with error -2 [ 70.221163] brcmfmac 0000:73:00.0: Direct firmware load for brcm/brcmfmac4377b3-pcie.apple,fiji-X0.bin failed with error -2 [ 70.796663] brcmfmac: brcmf_c_process_txcap_blob: TxCap blob found, loading [ 70.803120] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4377/4 wl0: Jul 8 2023 00:34:19 version XXX.XXX.XXX.XXX.3.6.125 FWID 01-52f5532e [ 71.050390] brcmfmac 0000:73:00.0 wlp115s0f0: renamed from wlan0 [ 71.272907] ieee80211 phy0: brcmf_p2p_set_firmware: failed to update device address ret -52 [ 71.274155] ieee80211 phy0: brcmf_p2p_create_p2pdev: set p2p_disc error [ 71.274168] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp115s type 10 failed: err=-52 [ 74.273028] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 6 [ 78.345366] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 5 [ 78.743534] apple-mfi-fastcharge 3-1.1.4: USB disconnect, device number 5 [ 78.787445] ipheth 3-1.1.4:4.2: Apple iPhone USB Ethernet now disconnected [ 82.427579] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 4 [ 86.515686] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 3 [ 90.607081] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 2 [ 94.700382] hci_bcm4377 0000:73:00.1: failed to destroy transfer ring 1 [ 98.794934] hci_bcm4377 0000:73:00.1: failed to destroy completion ring 4 [ 102.889985] hci_bcm4377 0000:73:00.1: failed to destroy completion ring 3 [ 106.985484] hci_bcm4377 0000:73:00.1: failed to destroy completion ring 2 [ 111.081194] hci_bcm4377 0000:73:00.1: failed to destroy completion ring 1 [ 111.141036] hci_bcm4377 0000:73:00.1: can't disable ASPM; OS doesn't have ASPM control [ 115.432994] hci_bcm4377: probe of 0000:73:00.1 failed with error -110 [ 115.530895] ieee80211 phy0: brcmf_run_escan: error (-52) [ 115.530913] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 116.534654] ieee80211 phy0: brcmf_run_escan: error (-52) [ 116.534669] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 117.538232] ieee80211 phy0: brcmf_run_escan: error (-52) [ 117.538246] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 128.934194] ieee80211 phy0: brcmf_run_escan: error (-52) [ 128.934201] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 129.936918] ieee80211 phy0: brcmf_run_escan: error (-52) [ 129.936941] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 130.940320] ieee80211 phy0: brcmf_run_escan: error (-52) [ 130.940339] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 153.844234] ieee80211 phy0: brcmf_run_escan: error (-52) [ 153.844251] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 154.846817] ieee80211 phy0: brcmf_run_escan: error (-52) [ 154.846824] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52) [ 213.936489] IPv6: ADDRCONF(NETDEV_CHANGE): wlp115s0f0: link becomes ready [ 425.701419] aaudio_pcm_pointer while not started [ 425.701440] aaudio_pcm_pointer while not started [ 425.701520] aaudio_pcm_pointer while not started [ 425.701522] aaudio_pcm_pointer while not started [ 425.701567] aaudio_pcm_pointer while not started [ 425.701570] aaudio_pcm_pointer while not started [ 425.701582] aaudio_pcm_pointer while not started [ 425.701597] aaudio_pcm_pointer while not started [ 425.701599] aaudio_pcm_pointer while not started [ 425.701601] aaudio_pcm_pointer while not started [ 592.614582] aaudio_pcm_pointer while not started [ 592.614605] aaudio_pcm_pointer while not started [ 592.614699] aaudio_pcm_pointer while not started [ 592.614701] aaudio_pcm_pointer while not started [ 592.614737] aaudio_pcm_pointer while not started [ 592.614738] aaudio_pcm_pointer while not started [ 592.614748] aaudio_pcm_pointer while not started [ 592.614760] aaudio_pcm_pointer while not started [ 592.614761] aaudio_pcm_pointer while not started [ 592.614763] aaudio_pcm_pointer while not started [ 622.554522] aaudio_pcm_pointer while not started [ 622.554545] aaudio_pcm_pointer while not started [ 622.554616] aaudio_pcm_pointer while not started [ 622.554620] aaudio_pcm_pointer while not started [ 622.554680] aaudio_pcm_pointer while not started [ 622.554686] aaudio_pcm_pointer while not started [ 622.554700] aaudio_pcm_pointer while not started [ 622.554716] aaudio_pcm_pointer while not started [ 622.554718] aaudio_pcm_pointer while not started [ 622.554720] aaudio_pcm_pointer while not started [ 737.694636] exFAT-fs (nvme0n1p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 744.220187] ntfs3: Max link count 4000 [ 744.220192] ntfs3: Enabled Linux POSIX ACLs support [ 744.220193] ntfs3: Read-only LZX/Xpress compression included [ 744.220594] ntfs3: Unknown parameter 'windows_names' [ 893.434457] loop0: detected capacity change from 0 to 8 [ 901.930260] loop0: detected capacity change from 0 to 8 [ 912.299989] loop0: detected capacity change from 0 to 8 [ 926.716517] loop0: detected capacity change from 0 to 83672 [ 961.112276] loop1: detected capacity change from 0 to 8 [ 972.985101] loop1: detected capacity change from 0 to 151784 [ 975.099336] loop2: detected capacity change from 0 to 8 [ 988.964874] loop3: detected capacity change from 0 to 187776 [ 1023.377711] loop4: detected capacity change from 0 to 848128 [ 4776.823011] aaudio_pcm_pointer while not started [ 4776.823048] aaudio_pcm_pointer while not started [ 4776.823117] aaudio_pcm_pointer while not started [ 4776.823123] aaudio_pcm_pointer while not started [ 4776.823162] aaudio_pcm_pointer while not started [ 4776.823165] aaudio_pcm_pointer while not started [ 4776.823175] aaudio_pcm_pointer while not started [ 4776.823191] aaudio_pcm_pointer while not started [ 4776.823193] aaudio_pcm_pointer while not started [ 4776.823197] aaudio_pcm_pointer while not started [ 4781.062969] perf: interrupt took too long (2598 > 2500), lowering kernel.perf_event_max_sample_rate to 76750 [ 5936.757454] aaudio_pcm_pointer while not started [ 5936.757475] aaudio_pcm_pointer while not started [ 5936.757611] aaudio_pcm_pointer while not started [ 5936.757614] aaudio_pcm_pointer while not started [ 5936.757623] aaudio_pcm_pointer while not started [ 5936.757639] aaudio_pcm_pointer while not started [ 5936.757640] aaudio_pcm_pointer while not started [ 5936.757643] aaudio_pcm_pointer while not started [ 6101.330024] perf: interrupt took too long (3255 > 3247), lowering kernel.perf_event_max_sample_rate to 61250 [ 6463.243129] aaudio_pcm_pointer while not started [ 6463.243159] aaudio_pcm_pointer while not started [ 6463.243333] aaudio_pcm_pointer while not started [ 6463.243344] aaudio_pcm_pointer while not started [ 6463.243367] aaudio_pcm_pointer while not started [ 6463.243388] aaudio_pcm_pointer while not started [ 6463.243390] aaudio_pcm_pointer while not started [ 6463.243393] aaudio_pcm_pointer while not started [ 6463.243904] aaudio_pcm_pointer while not started [ 6463.243912] aaudio_pcm_pointer while not started [ 6463.243921] aaudio_pcm_pointer while not started [ 6463.243928] aaudio_pcm_pointer while not started [ 6463.243952] aaudio_pcm_pointer while not started [ 6463.243955] aaudio_pcm_pointer while not started [ 6463.243967] aaudio_pcm_pointer while not started [ 6463.243969] aaudio_pcm_pointer while not started [ 6463.243978] aaudio_pcm_pointer while not started [ 6463.243980] aaudio_pcm_pointer while not started [ 6463.244007] aaudio_pcm_pointer while not started [ 6463.244009] aaudio_pcm_pointer while not started [ 6463.244035] aaudio_pcm_pointer while not started [ 6463.244038] aaudio_pcm_pointer while not started [ 6463.244057] aaudio_pcm_pointer while not started [ 6463.244061] aaudio_pcm_pointer while not started [ 6463.244083] aaudio_pcm_pointer while not started [ 6463.244086] aaudio_pcm_pointer while not started [ 6463.244109] aaudio_pcm_pointer while not started [ 6463.244114] aaudio_pcm_pointer while not started [ 6463.244222] aaudio_pcm_pointer while not started [ 6463.244232] aaudio_pcm_pointer while not started [ 6463.244259] aaudio_pcm_pointer while not started [ 6463.244263] aaudio_pcm_pointer while not started [ 6463.245277] aaudio_pcm_pointer while not started [ 6463.245294] aaudio_pcm_pointer while not started [ 6463.245318] aaudio_pcm_pointer while not started [ 6463.245328] aaudio_pcm_pointer while not started [ 6463.245330] aaudio_pcm_pointer while not started [ 6463.245335] aaudio_pcm_pointer while not started [ 6463.245932] aaudio_pcm_pointer while not started [ 6463.245942] aaudio_pcm_pointer while not started [ 6463.245955] aaudio_pcm_pointer while not started [ 6463.246008] aaudio_pcm_pointer while not started [ 6463.246018] aaudio_pcm_pointer while not started [ 6463.246429] aaudio_pcm_pointer while not started [ 6463.246443] aaudio_pcm_pointer while not started [ 6463.246487] aaudio_pcm_pointer while not started [ 6463.246494] aaudio_pcm_pointer while not started [ 7635.099898] aaudio_pcm_pointer while not started [ 7635.099923] aaudio_pcm_pointer while not started [ 7635.100038] aaudio_pcm_pointer while not started [ 7635.100045] aaudio_pcm_pointer while not started [ 7635.100055] aaudio_pcm_pointer while not started [ 7635.100071] aaudio_pcm_pointer while not started [ 7635.100073] aaudio_pcm_pointer while not started [ 7635.100076] aaudio_pcm_pointer while not started [ 7635.100999] aaudio_pcm_pointer while not started [ 7635.101006] aaudio_pcm_pointer while not started [ 7635.101016] aaudio_pcm_pointer while not started [ 7635.101021] aaudio_pcm_pointer while not started [ 7635.101065] aaudio_pcm_pointer while not started [ 7635.101069] aaudio_pcm_pointer while not started [ 7635.101072] aaudio_pcm_pointer while not started [ 7635.101079] aaudio_pcm_pointer while not started [ 7635.101081] aaudio_pcm_pointer while not started [ 7635.101118] aaudio_pcm_pointer while not started [ 7635.101121] aaudio_pcm_pointer while not started [ 7635.101146] aaudio_pcm_pointer while not started [ 7635.101149] aaudio_pcm_pointer while not started [ 7635.101161] aaudio_pcm_pointer while not started [ 7635.101164] aaudio_pcm_pointer while not started [ 7635.101178] aaudio_pcm_pointer while not started [ 7635.101181] aaudio_pcm_pointer while not started [ 7635.101191] aaudio_pcm_pointer while not started [ 7635.101195] aaudio_pcm_pointer while not started [ 7920.758982] perf: interrupt took too long (4089 > 4068), lowering kernel.perf_event_max_sample_rate to 48750 [ 8851.613392] aaudio_pcm_pointer while not started [ 8851.613440] aaudio_pcm_pointer while not started [ 8851.613559] aaudio_pcm_pointer while not started [ 8851.613572] aaudio_pcm_pointer while not started [ 8851.613595] aaudio_pcm_pointer while not started [ 8851.613612] aaudio_pcm_pointer while not started [ 8851.613613] aaudio_pcm_pointer while not started [ 8851.613617] aaudio_pcm_pointer while not started [ 8851.614596] aaudio_pcm_pointer while not started [ 8851.614606] aaudio_pcm_pointer while not started [ 8851.614620] aaudio_pcm_pointer while not started [ 8851.614629] aaudio_pcm_pointer while not started [ 8851.614664] aaudio_pcm_pointer while not started [ 8851.614669] aaudio_pcm_pointer while not started [ 8851.614674] aaudio_pcm_pointer while not started [ 8851.614687] aaudio_pcm_pointer while not started [ 8851.614691] aaudio_pcm_pointer while not started [ 8851.614754] aaudio_pcm_pointer while not started [ 8851.614759] aaudio_pcm_pointer while not started [ 8851.614801] aaudio_pcm_pointer while not started [ 8851.614808] aaudio_pcm_pointer while not started [ 8851.614831] aaudio_pcm_pointer while not started [ 8851.614837] aaudio_pcm_pointer while not started [ 8851.614858] aaudio_pcm_pointer while not started [ 8851.614861] aaudio_pcm_pointer while not started [ 8851.614882] aaudio_pcm_pointer while not started [ 8851.614887] aaudio_pcm_pointer while not started [ 8851.614940] aaudio_pcm_pointer while not started [ 8851.614944] aaudio_pcm_pointer while not started [ 8851.614965] aaudio_pcm_pointer while not started [ 8851.614970] aaudio_pcm_pointer while not started [ 8851.614972] aaudio_pcm_pointer while not started [ 8851.614975] aaudio_pcm_pointer while not started [ 8851.616100] aaudio_pcm_pointer while not started [ 8851.616109] aaudio_pcm_pointer while not started [ 8851.616124] aaudio_pcm_pointer while not started [ 8851.616163] aaudio_pcm_pointer while not started [ 8851.616171] aaudio_pcm_pointer while not started [ 8851.616357] aaudio_pcm_pointer while not started [ 8851.616366] aaudio_pcm_pointer while not started [ 8851.616398] aaudio_pcm_pointer while not started [ 8851.616413] aaudio_pcm_pointer while not started [ 8851.618716] aaudio_pcm_pointer while not started [ 8851.618728] aaudio_pcm_pointer while not started [ 8851.618752] aaudio_pcm_pointer while not started [ 8851.618757] aaudio_pcm_pointer while not started [ 8851.618778] aaudio_pcm_pointer while not started [ 8851.618783] aaudio_pcm_pointer while not started [11087.714459] perf: interrupt took too long (5112 > 5111), lowering kernel.perf_event_max_sample_rate to 39000 [11743.508774] PM: suspend entry (deep) [11743.525619] Filesystems sync: 0.016 seconds [11743.530760] Freezing user space processes [11743.533064] Freezing user space processes completed (elapsed 0.002 seconds) [11743.533069] OOM killer disabled. [11743.533070] Freezing remaining freezable tasks [11743.534050] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [11743.534094] printk: Suspending console(s) (use no_console_suspend to debug) [11743.562923] bce_vhci: suspend started [11743.562926] bce_vhci: suspend endpoints [11743.565306] bce_vhci: suspend ports [11743.567082] bce_vhci: suspend controller [11743.569450] bce_vhci: suspend done [11743.582158] sd 1:0:0:0: [sda] Synchronizing SCSI cache [11744.098027] aaudio aaudio: Failed to reset remote access [11745.601983] brcmfmac 0000:73:00.0: brcmf_pcie_pm_enter_D3: Timeout on response for entering D3 substate [11745.601999] brcmfmac 0000:73:00.0: PM: pci_pm_suspend(): brcmf_pcie_pm_enter_D3+0x0/0x170 [brcmfmac] returns -5 [11745.602066] brcmfmac 0000:73:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -5 [11745.602079] brcmfmac 0000:73:00.0: PM: failed to suspend async: error -5 [11745.602259] PM: Some devices failed to suspend, or early wake event detected [11745.612458] nvme nvme0: 1/0/0 default/read/poll queues [11745.612606] nvme nvme0: Identify NS List failed (status=0xb) [11745.619999] aaudio_handle_reply: No queued item found for tag: S067 [11745.982866] bce_vhci: resume started [11745.982878] bce_vhci: resume controller [11745.983857] bce_vhci: resume ports [11745.985335] bce_vhci: resume endpoints [11745.986719] bce_vhci: resume done [11746.141584] OOM killer enabled. [11746.141588] Restarting tasks ... done. [11746.148649] random: crng reseeded on system resumption [11746.152653] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [11746.155842] bce_vhci_reset_device 1 [11746.271388] video LNXVIDEO:00: Restoring backlight state [11746.271569] PM: suspend exit [11746.271634] PM: suspend entry (s2idle) [11746.281889] usb 5-1: new high-speed USB device number 4 using apple-bce [11746.281896] bce_vhci_enable_device [11746.282383] bce_vhci_cmd_device_create 1 -> 3 [11746.285171] bce_vhci_reset_device 1 [11746.285175] bce-vhci: Not implemented: wait for pending output requests [11746.413888] bce_vhci_enable_device [11746.440314] usb 5-1: New USB device found, idVendor=05ac, idProduct=8233, bcdDevice= 2.01 [11746.440321] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11746.440323] usb 5-1: Product: Apple T2 Controller [11746.440325] usb 5-1: Manufacturer: Apple Inc. [11746.440327] usb 5-1: SerialNumber: ... [11746.446756] bce_vhci_reset_device 2 [11746.573268] Filesystems sync: 0.301 seconds [11746.573446] Freezing user space processes [11746.573889] usb 5-2: new high-speed USB device number 5 using apple-bce [11746.573893] bce_vhci_enable_device [11746.574412] bce_vhci_cmd_device_create 2 -> 4 [11746.575635] Freezing user space processes completed (elapsed 0.002 seconds) [11746.575639] OOM killer disabled. [11746.575639] Freezing remaining freezable tasks [11746.577030] bce_vhci_reset_device 2 [11746.577032] bce-vhci: Not implemented: wait for pending output requests [11746.710032] bce_vhci_enable_device [11746.737944] usb 5-2: New USB device found, idVendor=05ac, idProduct=8514, bcdDevice= 2.01 [11746.737957] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11746.737961] usb 5-2: Product: FaceTime HD Camera (Built-in) [11746.737965] usb 5-2: Manufacturer: Apple Inc. [11746.737968] usb 5-2: SerialNumber: ... [11746.742331] bce_vhci_reset_device 4 [11746.869982] usb 5-4: new high-speed USB device number 6 using apple-bce [11746.869996] bce_vhci_enable_device [11746.870644] bce_vhci_cmd_device_create 4 -> 5 [11746.873813] bce_vhci_reset_device 4 [11746.873821] bce-vhci: Not implemented: wait for pending output requests [11747.006048] bce_vhci_enable_device [11747.032796] usb 5-4: New USB device found, idVendor=05ac, idProduct=8103, bcdDevice= 2.15 [11747.032810] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11747.032815] usb 5-4: Product: Headset [11747.032818] usb 5-4: Manufacturer: Apple [11747.032822] usb 5-4: SerialNumber: ... [11747.040872] input: Apple Headset as /devices/pci0000:00/0000:00:1c.4/0000:74:00.1/apple-bce/apple-bce/bce-vhci/usb5/5-4/5-4:1.0/0003:05AC:8103.0008/input/input18 [11747.098359] hid-generic 0003:05AC:8103.0008: input,hidraw6: USB HID v1.01 Device [Apple Headset] on usb-bce-vhci-4/input0 [11747.099281] bce_vhci_reset_device 6 [11747.226019] usb 5-6: new high-speed USB device number 7 using apple-bce [11747.226034] bce_vhci_enable_device [11747.226629] bce_vhci_cmd_device_create 6 -> 6 [11747.229831] bce_vhci_reset_device 6 [11747.229840] bce-vhci: Not implemented: wait for pending output requests [11747.361985] bce_vhci_enable_device [11747.390351] usb 5-6: New USB device found, idVendor=05ac, idProduct=8102, bcdDevice= 2.01 [11747.390363] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11747.390367] usb 5-6: Product: Touch Bar Backlight [11747.390371] usb 5-6: Manufacturer: Apple Inc. [11747.390375] usb 5-6: SerialNumber: ... [11747.405315] Freezing remaining freezable tasks completed (elapsed 0.829 seconds) [11747.405326] printk: Suspending console(s) (use no_console_suspend to debug) [11747.422177] bce_vhci: suspend started [11747.422184] bce_vhci: suspend endpoints [11747.425319] bce_vhci: suspend ports [11747.429678] bce_vhci: suspend controller [11747.431398] bce_vhci: suspend done [11747.465972] sd 1:0:0:0: [sda] Synchronizing SCSI cache [11747.937962] aaudio aaudio: Failed to reset remote access [11751.457955] brcmfmac 0000:73:00.0: brcmf_pcie_pm_enter_D3: Timeout on response for entering D3 substate [11751.457965] brcmfmac 0000:73:00.0: PM: pci_pm_suspend(): brcmf_pcie_pm_enter_D3+0x0/0x170 [brcmfmac] returns -5 [11751.458024] brcmfmac 0000:73:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -5 [11751.458039] brcmfmac 0000:73:00.0: PM: failed to suspend async: error -5 [11751.458112] PM: Some devices failed to suspend, or early wake event detected [11751.467995] nvme nvme0: 1/0/0 default/read/poll queues [11751.468039] nvme nvme0: Identify NS List failed (status=0xb) [11751.489277] aaudio_handle_reply: No queued item found for tag: S069 [11751.839048] bce_vhci: resume started [11751.839059] bce_vhci: resume controller [11751.840074] bce_vhci: resume ports [11751.843908] bce_vhci: resume endpoints [11751.846389] bce_vhci: resume done [11751.911056] OOM killer enabled. [11751.911061] Restarting tasks ... done. [11751.920026] random: crng reseeded on system resumption [11751.920736] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [11752.015549] video LNXVIDEO:00: Restoring backlight state [11752.015692] PM: suspend exit [11752.436415] mc: Linux media interface: v0.10 [11752.457849] hid-apple-magic-backlight 0003:05AC:8102.0009: hiddev5,hidraw7: USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-6/input0 [11752.463357] videodev: Linux video capture interface: v2.00 [11752.490444] usbcore: registered new interface driver cdc_ether [11752.501818] bce_vhci_drop_endpoint 1:12 [11752.502483] bce_vhci_drop_endpoint 1:1 [11752.504382] usb 5-2: Found UVC 1.50 device FaceTime HD Camera (Built-in) (05ac:8514) [11752.504595] bce_vhci_drop_endpoint 2:11 [11752.528878] usbcore: registered new interface driver uvcvideo [11752.556643] cdc_ncm 5-1:1.0: MAC-Address: 1281A4943FDEC48D704E4DF72A7D70C9 [11752.556649] cdc_ncm 5-1:1.0: setting rx_max = 16384 [11752.557606] cdc_ncm 5-1:1.0: setting tx_max = 16384 [11752.565135] cdc_ncm 5-1:1.0 eth0: register 'cdc_ncm' at usb-bce-vhci-1, CDC NCM (NO ZLP), 1281A4943FDEC48D704E4DF72A7D70C9 [11752.565183] usbcore: registered new interface driver cdc_ncm [11752.569604] usbcore: registered new interface driver cdc_wdm [11752.571599] usbcore: registered new interface driver cdc_mbim [11752.580394] cdc_ncm 5-1:1.0 enxacde48001122: renamed from eth0 [11752.607557] ieee80211 phy0: brcmf_p2p_set_firmware: failed to update device address ret -52 [11752.608234] ieee80211 phy0: brcmf_p2p_create_p2pdev: set p2p_disc error [11752.608236] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp115s type 10 failed: err=-52 [11752.610229] IPv6: ADDRCONF(NETDEV_CHANGE): enxacde48001122: link becomes ready [11757.668682] IPv6: ADDRCONF(NETDEV_CHANGE): wlp115s0f0: link becomes ready [12496.388295] aaudio_pcm_pointer while not started [12496.388326] aaudio_pcm_pointer while not started [12496.388460] aaudio_pcm_pointer while not started [12496.388463] aaudio_pcm_pointer while not started [12496.388475] aaudio_pcm_pointer while not started [12496.388490] aaudio_pcm_pointer while not started [12496.388492] aaudio_pcm_pointer while not started [12496.388495] aaudio_pcm_pointer while not started [13585.841132] PM: suspend entry (deep) [13585.855939] Filesystems sync: 0.014 seconds [13585.856438] Freezing user space processes [13585.858358] Freezing user space processes completed (elapsed 0.001 seconds) [13585.858363] OOM killer disabled. [13585.858363] Freezing remaining freezable tasks [13585.859628] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [13585.859668] printk: Suspending console(s) (use no_console_suspend to debug) [13585.889276] bce_vhci: suspend started [13585.889280] bce_vhci: suspend endpoints [13585.889282] bce-vhci: Not implemented: wait for pending output requests [13585.893990] bce_vhci: suspend ports [13585.898087] bce_vhci: suspend controller [13585.899863] bce_vhci: suspend done [13585.918373] sd 1:0:0:0: [sda] Synchronizing SCSI cache [13586.422242] aaudio aaudio: Failed to reset remote access [13589.942253] brcmfmac 0000:73:00.0: brcmf_pcie_pm_enter_D3: Timeout on response for entering D3 substate [13589.942274] brcmfmac 0000:73:00.0: PM: pci_pm_suspend(): brcmf_pcie_pm_enter_D3+0x0/0x170 [brcmfmac] returns -5 [13589.942324] brcmfmac 0000:73:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -5 [13589.942336] brcmfmac 0000:73:00.0: PM: failed to suspend async: error -5 [13589.942491] PM: Some devices failed to suspend, or early wake event detected [13589.952616] nvme nvme0: 1/0/0 default/read/poll queues [13589.952676] nvme nvme0: Identify NS List failed (status=0xb) [13589.959151] aaudio_handle_reply: No queued item found for tag: S073 [13590.323296] bce_vhci: resume started [13590.323331] bce_vhci: resume controller [13590.324380] bce_vhci: resume ports [13590.328303] bce_vhci: resume endpoints [13590.332298] bce_vhci: resume done [13591.210829] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd [13591.942454] xhci_hcd 0000:00:0d.0: WARN: endpoint 0x81 has streams on device reset, freeing streams. [13591.942576] xhci_hcd 0000:00:0d.0: WARN: endpoint 0x02 has streams on device reset, freeing streams. [13591.942638] xhci_hcd 0000:00:0d.0: WARN: endpoint 0x83 has streams on device reset, freeing streams. [13591.942790] usb 2-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [13592.042791] usb 2-1.2: reset SuperSpeed USB device number 3 using xhci_hcd [13592.257048] OOM killer enabled. [13592.257054] Restarting tasks ... [13592.256995] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [13592.268115] done. [13592.268135] random: crng reseeded on system resumption [13592.363802] video LNXVIDEO:00: Restoring backlight state [13592.364171] PM: suspend exit [13592.364377] PM: suspend entry (s2idle)