[ 0.625244] i2c_dev: i2c /dev entries driver [ 0.633620] SCSI subsystem initialized [ 0.639164] device-mapper: uevent: version 1.0.3 [ 0.639222] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.777720] xor: automatically using best checksumming function avx [ 0.795359] raid6: avx2x4 gen() 38884 MB/s [ 0.812408] raid6: avx2x2 gen() 23020 MB/s [ 0.829351] raid6: avx2x1 gen() 30429 MB/s [ 0.829352] raid6: using algorithm avx2x4 gen() 38884 MB/s [ 0.846352] raid6: .... xor() 20630 MB/s, rmw enabled [ 0.846352] raid6: using avx2x2 recovery algorithm [ 0.916576] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no [ 0.928965] ACPI: bus type USB registered [ 0.928979] usbcore: registered new interface driver usbfs [ 0.928984] usbcore: registered new interface driver hub [ 0.928990] usbcore: registered new device driver usb [ 0.943361] random: crng init done [ 1.260541] Linux agpgart interface v0.103 [ 1.261405] tsc: Refined TSC clocksource calibration: 3600.000 MHz [ 1.261410] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns [ 1.261427] clocksource: Switched to clocksource tsc [ 1.274021] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.287541] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.287693] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.290320] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 1.294895] ACPI: button: Power Button [PWRF] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.314122] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.315340] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.323765] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.323770] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.323773] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.325390] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.325394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.325396] usb usb1: Product: xHCI Host Controller [ 1.325397] usb usb1: Manufacturer: Linux 6.1.2-desktop-1omv2301 xhci-hcd [ 1.325399] usb usb1: SerialNumber: ... [ 1.330259] ACPI: bus type drm_connector registered [ 1.330476] hub 1-0:1.0: USB hub found [ 1.330942] rtsx_pci 0000:02:00.0: enabling device (0100 -> 0102) [ 1.330951] hub 1-0:1.0: 16 ports detected [ 1.339574] cryptd: max_cpu_qlen set to 1000 [ 1.353384] libata version 3.00 loaded. [ 1.354906] AVX2 version of gcm_enc/dec engaged. [ 1.354940] AES CTR mode by8 optimization enabled [ 1.355533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.355537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.355539] usb usb2: Product: xHCI Host Controller [ 1.355540] usb usb2: Manufacturer: Linux 6.1.2-desktop-1omv2301 xhci-hcd [ 1.355542] usb usb2: SerialNumber: ... [ 1.362798] ahci 0000:00:17.0: version 3.0 [ 1.369672] hub 2-0:1.0: USB hub found [ 1.369702] hub 2-0:1.0: 10 ports detected [ 1.371387] nvme nvme0: pci function 0000:01:00.0 [ 1.373078] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.373082] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.376731] usb: port power management may be unreliable [ 1.379191] scsi host0: ahci [ 1.379660] scsi host1: ahci [ 1.379710] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 127 [ 1.379713] ata2: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b180 irq 127 [ 1.397807] nvme nvme0: 8/0/0 default/read/poll queues [ 1.399964] nvme0n1: p1 p2 p3 [ 1.591355] usb 1-7: new low-speed USB device number 2 using xhci_hcd [ 1.690461] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.690478] ata2: SATA link down (SStatus 4 SControl 300) [ 1.691482] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3W0, max UDMA/133 [ 1.693522] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.693525] ata1.00: Features: NCQ-prio [ 1.696830] ata1.00: configured for UDMA/133 [ 1.696890] scsi 0:0:0:0: Direct-Access ATA HGST HTS721010A9 A3W0 PQ: 0 ANSI: 5 [ 1.715972] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.715975] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.715982] sd 0:0:0:0: [sda] Write Protect is off [ 1.715983] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.715993] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.716015] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.727721] usb 1-7: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00 [ 1.727724] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.727726] usb 1-7: Product: Microsoft USB Optical Mouse [ 1.727728] usb 1-7: Manufacturer: PixArt [ 1.842358] usb 1-8: new low-speed USB device number 3 using xhci_hcd [ 1.973450] usb 1-8: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10 [ 1.973452] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.973454] usb 1-8: Product: USB Keyboard [ 1.973456] usb 1-8: Manufacturer: SEM [ 1.996741] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.089358] usb 1-10: new high-speed USB device number 4 using xhci_hcd [ 2.225684] usb 1-10: New USB device found, idVendor=1bcf, idProduct=2b94, bcdDevice=67.11 [ 2.225688] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.225689] usb 1-10: Product: Integrated_Webcam_FHD [ 2.225691] usb 1-10: Manufacturer: CKFEF49F304010001BE2 [ 2.269341] hid: raw HID events driver (C) Jiri Kosina [ 2.274708] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.276096] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.277197] usbcore: registered new interface driver usbhid [ 2.277199] usbhid: USB HID core driver [ 2.279003] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.279685] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:00CB.0001/input/input3 [ 2.279741] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-7/input0 [ 2.279834] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1A2C:2124.0002/input/input4 [ 2.332396] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-8/input0 [ 2.332512] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1A2C:2124.0003/input/input5 [ 2.385393] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1A2C:2124.0003/input/input6 [ 2.385425] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-8/input1 [ 2.546852] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP [ 2.579270] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.581537] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.581676] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.619425] fbcon: i915drmfb (fb0) is primary device [ 2.646203] Console: switching to colour frame buffer device 240x67 [ 2.664806] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.775980] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.534217] zram0: detected capacity change from 0 to 16078848 [ 3.597144] Adding 8039420k swap on /dev/zram0. Priority:100 extents:1 across:8039420k SSDscFS [ 3.850257] Adding 9227464k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:9227464k SSDscFS [ 3.863844] intel-lpss 0000:00:15.0: enabling device (0100 -> 0102) [ 3.864067] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 3.866341] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 3.878160] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4.019308] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.019312] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 4.019691] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.019693] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 4.056936] mc: Linux media interface: v0.10 [ 4.058470] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.058525] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.058578] pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000 [ 4.058641] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] e1000e: Intel(R) PRO/1000 Network Driver [ 4.060621] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.060839] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.064098] i2c i2c-4: 2/2 memory slots populated (from DMI) [ 4.064462] i2c i2c-4: Successfully instantiated SPD at 0x50 [ 4.093125] input: Dell AIO WMI hotkeys as /devices/virtual/input/input8 [ 4.105755] videodev: Linux video capture interface: v2.00 [ 4.133509] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 4.154825] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.154828] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.154829] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.154830] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.154831] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.178428] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input9 [ 4.233489] usb 1-10: Found UVC 1.00 device Integrated_Webcam_FHD (1bcf:2b94) [ 4.238035] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102) [ 4.238208] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.257566] input: Integrated_Webcam_FHD: Integrat as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input10 [ 4.257657] usbcore: registered new interface driver uvcvideo [ 4.285232] intel_tcc_cooling: Programmable TCC Offset detected [ 4.289098] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3661: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 4.289103] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 4.289105] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 4.289107] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.289109] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.289110] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1b [ 4.289112] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x19 [ 4.289113] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.327728] iTCO_vendor_support: vendor-support=0 [ 4.328483] ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 4.330487] iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 4.333396] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 4.333437] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 4.333476] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 4.333510] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.333546] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.353173] intel_rapl_common: Found RAPL domain package [ 4.353176] intel_rapl_common: Found RAPL domain core [ 4.353178] intel_rapl_common: Found RAPL domain uncore [ 4.353179] intel_rapl_common: Found RAPL domain dram [ 4.442737] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 4.505948] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 0F8754C9C2A254B934FB2AFC8B018426 [ 4.505955] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 4.506016] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 4.510124] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 4.664391] tpm_tis: probe of MSFT0101:00 failed with error -1 [ 7.833866] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 7.833940] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 7.852645] NET: Registered PF_PACKET protocol family [ 174.199469] i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers [ 174.199478] i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited [ 420.217832] Non-volatile memory driver v1.3 [ 420.312635] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 420.322671] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 423.793461] Bluetooth: Core ver 2.22 [ 423.793476] NET: Registered PF_BLUETOOTH protocol family [ 423.793478] Bluetooth: HCI device and connection manager initialized [ 423.793480] Bluetooth: HCI socket layer initialized [ 423.793482] Bluetooth: L2CAP socket layer initialized [ 423.793484] Bluetooth: SCO socket layer initialized [ 424.271769] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 424.273649] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 942.469455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 942.469459] Bluetooth: BNEP filters: protocol multicast [ 942.469463] Bluetooth: BNEP socket layer initialized [ 6342.141990] zram0: detected capacity change from 16078848 to 0