[ 0.000000] Linux version 6.7.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.7.12-1~bpo12+1 (2024-05-06) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.506 MHz processor [ 0.002673] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002676] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008988] AGP: No AGP bridge found [ 0.009047] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.009054] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.009056] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010823] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010833] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016320] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016804] RAMDISK: [mem 0x2d72d000-0x32b8dfff] ACPI: Early table checksum verification disabled [ 0.016816] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016821] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016828] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016833] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.016839] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016843] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016846] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016850] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016854] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016858] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016861] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016865] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016869] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016872] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.016956] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017356] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017363] Movable zone start for each node [ 0.017367] Early memory node ranges [ 0.017368] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017431] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027506] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027533] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027547] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028443] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028505] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028733] ACPI: PM-Timer IO Port: 0x808 [ 0.028743] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028751] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028755] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028757] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028760] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028764] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028765] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028770] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.028790] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028825] Booting paravirtualized kernel on bare hardware [ 0.028827] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034261] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.034969] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.034977] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.034980] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035007] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.035075] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64", will be passed to user space. [ 0.041670] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045045] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045138] Fallback order for Node 0: 0 [ 0.045144] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.045146] Policy zone: Normal [ 0.045155] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045157] AGP: Checking aperture... [ 0.051459] AGP: No AGP bridge found [ 0.051461] AGP: Node 0: aperture [bus addr 0xbcdc000000-0xbcddffffff] (32MB) [ 0.051463] Aperture beyond 4GB. Ignoring. [ 0.051464] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051465] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051466] AGP: This costs you 64MB of RAM [ 0.051469] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051472] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.097634] Memory: 3159644K/25119580K available (16384K kernel code, 2365K rwdata, 10668K rodata, 3992K init, 3568K bss, 706652K reserved, 0K cma-reserved) [ 0.106896] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107086] ftrace: allocating 43389 entries in 170 pages [ 0.120343] ftrace: allocated 170 pages with 4 groups [ 0.121572] Dynamic Preempt: voluntary [ 0.121806] rcu: Preemptible hierarchical RCU implementation. [ 0.121807] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.121809] Trampoline variant of Tasks RCU enabled. [ 0.121809] Rude variant of Tasks RCU enabled. [ 0.121810] Tracing variant of Tasks RCU enabled. [ 0.121811] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.121812] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125988] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.126194] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.126294] spurious 8259A interrupt: IRQ7. [ 0.129647] Console: colour VGA+ 80x25 [ 0.129649] printk: legacy console [tty0] enabled [ 0.129914] ACPI: Core revision 20230628 [ 0.130073] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.130087] APIC: Switch to symmetric I/O mode setup [ 0.130462] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150086] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c97511bc47, max_idle_ns: 440795244908 ns [ 0.150093] Calibrating delay loop (skipped), value calculated using timer frequency.. 6187.01 BogoMIPS (lpj=12374024) [ 0.150116] LVT offset 1 assigned for vector 0xf9 [ 0.150123] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150125] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150129] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150132] Spectre V2 : Mitigation: Retpolines [ 0.150133] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150134] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150135] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150136] RETBleed: Mitigation: untrained return thunk [ 0.150138] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150140] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150145] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150147] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150148] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150150] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150152] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.176947] Freeing SMP alternatives memory: 36K [ 0.176953] pid_max: default: 32768 minimum: 301 [ 0.177827] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.178081] landlock: Up and running. [ 0.178082] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.178118] AppArmor: AppArmor initialized [ 0.178121] TOMOYO Linux initialized [ 0.178128] LSM support for eBPF active [ 0.178513] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.178599] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.292589] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.292853] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292875] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292898] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292921] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.292952] ... version: 0 [ 0.292953] ... bit width: 48 [ 0.292954] ... generic registers: 6 [ 0.292955] ... value mask: 0000ffffffffffff [ 0.292956] ... max period: 00007fffffffffff [ 0.292957] ... fixed-purpose events: 0 [ 0.292958] ... event mask: 000000000000003f [ 0.293068] signal: max sigframe size: 1776 [ 0.293130] rcu: Hierarchical SRCU implementation. [ 0.293131] rcu: Max phase no-delay instances is 1000. [ 0.294089] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.294089] smp: Bringing up secondary CPUs ... [ 0.294103] smpboot: x86: Booting SMP configuration: [ 0.294105] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.324092] smp: Brought up 1 node, 8 CPUs [ 0.324092] smpboot: Max logical packages: 1 [ 0.324092] smpboot: Total of 8 processors activated (49496.09 BogoMIPS) [ 0.381774] node 0 deferred pages initialised in 52ms [ 0.383344] devtmpfs: initialized [ 0.383344] x86/mm: Memory block size: 128MB [ 0.387110] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.387110] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.387110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.387110] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.387110] pinctrl core: initialized pinctrl subsystem [ 0.387821] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.388671] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.390471] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.391233] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.391593] thermal_sys: Registered thermal governor 'fair_share' [ 0.391593] thermal_sys: Registered thermal governor 'bang_bang' [ 0.391593] thermal_sys: Registered thermal governor 'step_wise' [ 0.391593] thermal_sys: Registered thermal governor 'user_space' [ 0.391593] thermal_sys: Registered thermal governor 'power_allocator' [ 0.391593] cpuidle: using governor ladder [ 0.391593] cpuidle: using governor menu [ 0.391593] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.391593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.391593] PCI: not using MMCONFIG [ 0.391593] PCI: Using configuration type 1 for base access [ 0.391593] PCI: Using configuration type 1 for extended access [ 0.391593] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.391593] mtrr: probably your BIOS does not setup all CPUs. [ 0.391593] mtrr: corrected configuration. [ 0.391593] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.391593] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391593] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.391593] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391593] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.394118] ACPI: Added _OSI(Module Device) [ 0.394120] ACPI: Added _OSI(Processor Device) [ 0.394121] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.394122] ACPI: Added _OSI(Processor Aggregator Device) [ 0.397715] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.416623] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.416623] ACPI: Interpreter enabled [ 0.416623] ACPI: PM: (supports S0 S3 S4 S5) [ 0.416623] ACPI: Using IOAPIC for interrupt routing [ 0.416623] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.416623] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.416623] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.416623] PCI: Using E820 reservations for host bridge windows [ 0.416623] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.423757] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.423764] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.424166] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.424321] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.424339] pci 0000:00:02.0: enabling Extended Tags [ 0.424363] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.424462] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.424480] pci 0000:00:04.0: enabling Extended Tags [ 0.424503] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.424595] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.424612] pci 0000:00:05.0: enabling Extended Tags [ 0.424635] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.424727] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.424744] pci 0000:00:06.0: enabling Extended Tags [ 0.424768] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.424864] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.424881] pci 0000:00:09.0: enabling Extended Tags [ 0.424904] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.424998] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.425016] pci 0000:00:0a.0: enabling Extended Tags [ 0.425039] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.425143] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.425157] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.425318] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.425332] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.425470] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.425533] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.425627] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.425640] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.425778] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.425840] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.425929] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.426060] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.426073] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.426238] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.426373] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.426533] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.426651] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.426664] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.426801] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.426943] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.427005] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.427092] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.427148] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.427201] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.427257] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.427320] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.427372] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.427472] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 [ 0.427487] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.427542] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.427593] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.427661] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.427754] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.427769] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.427842] pci 0000:01:00.1: supports D1 D2 [ 0.427931] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.427997] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.428074] pci 0000:02:00.0: PME# supported from D3hot [ 0.428153] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.428230] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.428312] pci 0000:03:00.0: supports D1 D2 [ 0.428313] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.428419] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.428488] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.428568] pci 0000:04:00.0: supports D1 D2 [ 0.428569] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.428667] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.428745] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.428832] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.428972] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.428987] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.429088] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.438127] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.438216] pci 0000:06:00.0: reg 0x10: [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.438483] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.438535] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.438553] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.438734] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.438739] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.438745] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.438747] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.438749] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.438751] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.438753] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.439537] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.439598] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.439660] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.439722] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.439773] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.439814] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.439854] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.439895] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.440077] iommu: Default domain type: Translated [ 0.440077] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.440077] pps_core: LinuxPPS API ver. 1 registered [ 0.440077] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.440077] PTP clock support registered [ 0.440077] EDAC MC: Ver: 3.0.0 [ 0.440077] NetLabel: Initializing [ 0.440077] NetLabel: domain hash size = 128 [ 0.440077] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.440077] NetLabel: unlabeled traffic allowed by default [ 0.440077] PCI: Using ACPI for IRQ routing [ 0.445219] PCI: pci_cache_line_size set to 64 bytes [ 0.445282] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.446138] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.446138] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.446138] vgaarb: loaded [ 0.446149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.446154] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.450093] clocksource: Switched to clocksource tsc-early [ 0.450110] VFS: Disk quotas dquot_6.6.0 [ 0.450110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.450110] AppArmor: AppArmor Filesystem Enabled [ 0.450110] pnp: PnP ACPI init [ 0.450110] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.450110] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.451819] system 00:03: [io 0x040b] has been reserved [ 0.451822] system 00:03: [io 0x04d6] has been reserved [ 0.451825] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.451827] system 00:03: [io 0x0c14] has been reserved [ 0.451829] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.451831] system 00:03: [io 0x0c52] has been reserved [ 0.451833] system 00:03: [io 0x0c6c] has been reserved [ 0.451834] system 00:03: [io 0x0c6f] has been reserved [ 0.451836] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.451838] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.451840] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.451842] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.451844] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.451846] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.451848] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.451850] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.451852] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.451854] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.451856] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.451860] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.451863] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.451865] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.451868] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.451870] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.451873] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.451980] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.452205] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.452708] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.459919] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.460226] NET: Registered PF_INET protocol family [ 0.460608] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.465429] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.465500] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.465849] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.466506] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.466789] TCP: Hash tables configured (established 262144 bind 65536) [ 0.467150] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.467338] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.467485] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.467703] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.467713] NET: Registered PF_XDP protocol family [ 0.467738] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 23272 usecs [ 0.511751] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19339 usecs [ 0.531748] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.551748] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19520 usecs [ 0.551986] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.552300] PCI: CLS 64 bytes, default 64 [ 0.552400] Trying to unpack rootfs image as initramfs... [ 0.553145] PCI-DMA: Disabling AGP. [ 0.553217] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.553219] PCI-DMA: using GART IOMMU. [ 0.553221] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.554085] software IO TLB: tearing down default memory pool [ 0.556596] LVT offset 0 assigned for vector 0x400 [ 0.559010] perf: AMD IBS detected (0x000000ff) [ 0.559119] amd_uncore: 4 amd_nb counters detected [ 0.559128] amd_uncore: 0 amd_l2 counters detected [ 0.559941] Initialise system trusted keyrings [ 0.559955] Key type blacklist registered [ 0.560023] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.560032] zbud: loaded [ 0.560452] fuse: init (API version 7.39) [ 0.560792] integrity: Platform Keyring initialized [ 0.560797] integrity: Machine keyring initialized [ 0.560799] Key type asymmetric registered [ 0.560801] Asymmetric key parser 'x509' registered [ 1.477839] Freeing initrd memory: 86404K [ 1.484208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.484286] io scheduler mq-deadline registered [ 1.486532] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.486578] ACPI: \_PR_.P001: Found 2 idle states [ 1.486681] ACPI: \_PR_.P002: Found 2 idle states [ 1.486771] ACPI: \_PR_.P003: Found 2 idle states [ 1.486861] ACPI: \_PR_.P004: Found 2 idle states [ 1.487009] ACPI: \_PR_.P005: Found 2 idle states [ 1.487109] ACPI: \_PR_.P006: Found 2 idle states [ 1.487204] ACPI: \_PR_.P007: Found 2 idle states [ 1.487301] ACPI: \_PR_.P008: Found 2 idle states [ 1.487721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.487916] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.488750] Linux agpgart interface v0.103 [ 1.489618] i8042: PNP: No PS/2 controller found. [ 1.489786] mousedev: PS/2 mouse device common for all mice [ 1.489812] rtc_cmos 00:06: RTC can wake from S4 [ 1.490022] rtc_cmos 00:06: registered as rtc0 [ 1.490046] rtc_cmos 00:06: setting system clock to 2024-07-01T13:51:10 UTC (1719841870) [ 1.490074] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.490086] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.490264] ledtrig-cpu: registered to indicate activity on CPUs [ 1.504178] NET: Registered PF_INET6 protocol family [ 1.509823] Segment Routing with IPv6 [ 1.509850] In-situ OAM (IOAM) with IPv6 [ 1.509892] mip6: Mobile IPv6 [ 1.509896] NET: Registered PF_PACKET protocol family [ 1.509940] mpls_gso: MPLS GSO support [ 1.509954] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.510501] microcode: Current revision: 0x0600063e [ 1.510504] microcode: Updated early from: 0x06000626 [ 1.510655] IPI shorthand broadcast: enabled [ 1.512375] sched_clock: Marking stable (1508013561, 3874864)->(1530877818, -18989393) [ 1.512560] registered taskstats version 1 [ 1.512684] Loading compiled-in X.509 certificates [ 1.540409] Loaded X.509 cert 'Build time autogenerated kernel key: 43de8aa80a227f11d49dc72550bfb28e4b254851' [ 1.543220] Key type .fscrypt registered [ 1.543222] Key type fscrypt-provisioning registered [ 1.552347] cryptd: max_cpu_qlen set to 1000 [ 1.563816] AVX version of gcm_enc/dec engaged. [ 1.563873] AES CTR mode by8 optimization enabled [ 1.575935] tsc: Refined TSC clocksource calibration: 3093.306 MHz [ 1.575943] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c969448c73, max_idle_ns: 440795345271 ns [ 1.576003] clocksource: Switched to clocksource tsc [ 1.603646] Key type encrypted registered [ 1.603659] AppArmor: AppArmor sha1 policy hashing enabled [ 1.603681] ima: No TPM chip found, activating TPM-bypass! [ 1.603686] ima: Allocated hash algorithm: sha256 [ 1.603712] ima: No architecture policies found [ 1.603725] evm: Initialising EVM extended attributes: [ 1.603726] evm: security.selinux [ 1.603727] evm: security.SMACK64 (disabled) [ 1.603728] evm: security.SMACK64EXEC (disabled) [ 1.603730] evm: security.SMACK64TRANSMUTE (disabled) [ 1.603731] evm: security.SMACK64MMAP (disabled) [ 1.603732] evm: security.apparmor [ 1.603733] evm: security.ima [ 1.603733] evm: security.capability [ 1.603734] evm: HMAC attrs: 0x1 [ 1.783944] RAS: Correctable Errors collector initialized. [ 1.784029] clk: Disabling unused clocks [ 1.786261] Freeing unused decrypted memory: 2028K [ 1.787351] Freeing unused kernel image (initmem) memory: 3992K [ 1.787354] Write protecting the kernel read-only data: 28672k [ 1.788126] Freeing unused kernel image (rodata/data gap) memory: 1620K [ 1.851662] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.851667] Run /init as init process [ 1.851669] with arguments: [ 1.851670] /init [ 1.851671] splash [ 1.851672] with environment: [ 1.851673] HOME=/ [ 1.851674] TERM=linux [ 1.851675] BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 [ 2.113556] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.113617] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.121839] Floppy drive(s): fd0 is 1.44M [ 2.132032] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.132045] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.132255] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.140310] ACPI: button: Power Button [PWRF] FDC 0 is a post-1991 82077 [ 2.148162] SCSI subsystem initialized [ 2.163447] ACPI: bus type USB registered [ 2.163498] usbcore: registered new interface driver usbfs [ 2.163516] usbcore: registered new interface driver hub [ 2.163546] usbcore: registered new device driver usb [ 2.200890] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.200897] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.200901] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] ACPI: bus type drm_connector registered [ 2.203826] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.215114] libata version 3.00 loaded. [ 2.222111] QUIRK: Enable AMD PLL fix [ 2.222144] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.222158] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.222165] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.222173] ehci-pci 0000:00:12.2: debug port 1 [ 2.222215] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.224312] pata_via 0000:05:00.1: version 0.3.4 [ 2.224937] scsi host0: pata_atiixp [ 2.225270] scsi host1: pata_via [ 2.225369] scsi host2: pata_atiixp [ 2.225430] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.225434] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.225928] scsi host3: pata_via [ 2.225991] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 2.225994] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 2.235983] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.236102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.236106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.236108] usb usb1: Product: EHCI Host Controller [ 2.236110] usb usb1: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.236112] usb usb1: SerialNumber: ... [ 2.236275] hub 1-0:1.0: USB hub found [ 2.236286] hub 1-0:1.0: 5 ports detected [ 2.236558] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.236565] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.236570] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.236579] ehci-pci 0000:00:13.2: debug port 1 [ 2.236618] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.247964] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.255984] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.256117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.256123] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.256126] usb usb2: Product: EHCI Host Controller [ 2.256128] usb usb2: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.256129] usb usb2: SerialNumber: ... [ 2.256311] hub 2-0:1.0: USB hub found [ 2.256322] hub 2-0:1.0: 5 ports detected [ 2.256574] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.256581] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.256586] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.256595] ehci-pci 0000:00:16.2: debug port 1 [ 2.256626] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.275906] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.275961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.275965] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.275967] usb usb3: Product: EHCI Host Controller [ 2.275969] usb usb3: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.275970] usb usb3: SerialNumber: ... [ 2.276128] hub 3-0:1.0: USB hub found [ 2.276138] hub 3-0:1.0: 4 ports detected [ 2.276393] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.276401] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.276459] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.276647] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.276653] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.276665] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.276709] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.276712] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.276715] usb usb4: Product: xHCI Host Controller [ 2.276716] usb usb4: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.276718] usb usb4: SerialNumber: ... [ 2.276869] hub 4-0:1.0: USB hub found [ 2.276882] hub 4-0:1.0: 2 ports detected [ 2.277037] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.277079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.277083] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.277085] usb usb5: Product: xHCI Host Controller [ 2.277086] usb usb5: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.277089] usb usb5: SerialNumber: ... [ 2.277234] hub 5-0:1.0: USB hub found [ 2.277247] hub 5-0:1.0: 2 ports detected [ 2.277496] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.277502] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 2.277557] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.277718] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.277723] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.277727] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.277781] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.277785] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.277787] usb usb6: Product: xHCI Host Controller [ 2.277789] usb usb6: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.277791] usb usb6: SerialNumber: ... [ 2.277972] hub 6-0:1.0: USB hub found [ 2.277985] hub 6-0:1.0: 2 ports detected [ 2.278171] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.278205] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.278208] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.278210] usb usb7: Product: xHCI Host Controller [ 2.278212] usb usb7: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.278213] usb usb7: SerialNumber: ... [ 2.278373] hub 7-0:1.0: USB hub found [ 2.278386] hub 7-0:1.0: 2 ports detected [ 2.398838] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.398843] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.398848] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.398851] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.398853] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.404904] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.406167] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.532004] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.622715] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.622725] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 2.622764] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.626231] ahci 0000:00:11.0: version 3.0 [ 2.626485] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.626491] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.627397] scsi host4: ahci [ 2.627587] scsi host5: ahci [ 2.627763] scsi host6: ahci [ 2.628022] scsi host7: ahci [ 2.628132] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 0 [ 2.628135] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 0 [ 2.628138] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 0 [ 2.628141] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 0 [ 2.628380] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.628386] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.629252] scsi host8: ahci [ 2.629468] scsi host9: ahci [ 2.629565] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.629569] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.683996] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.684001] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.684004] usb usb8: Product: OHCI PCI host controller [ 2.684006] usb usb8: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.684007] usb usb8: SerialNumber: ... [ 2.684240] hub 8-0:1.0: USB hub found [ 2.684250] hub 8-0:1.0: 5 ports detected [ 2.684661] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.684667] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.684694] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.696723] usb 3-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.696727] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.696730] usb 3-1: Product: 802.11n NIC [ 2.696731] usb 3-1: Manufacturer: Realtek [ 2.696733] usb 3-1: SerialNumber: ... [ 2.748158] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.748162] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.748164] usb usb9: Product: OHCI PCI host controller [ 2.748166] usb usb9: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.748167] usb usb9: SerialNumber: ... [ 2.748445] hub 9-0:1.0: USB hub found [ 2.748455] hub 9-0:1.0: 5 ports detected [ 2.748841] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.748847] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.748867] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.752176] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.816007] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.816011] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.816014] usb usb10: Product: OHCI PCI host controller [ 2.816015] usb usb10: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.816016] usb usb10: SerialNumber: ... [ 2.816291] hub 10-0:1.0: USB hub found [ 2.816301] hub 10-0:1.0: 2 ports detected [ 2.816615] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.816625] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.816646] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.880015] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.880020] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.880023] usb usb11: Product: OHCI PCI host controller [ 2.880025] usb usb11: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.880026] usb usb11: SerialNumber: ... [ 2.880249] hub 11-0:1.0: USB hub found [ 2.880259] hub 11-0:1.0: 4 ports detected [ 2.943823] ata10: SATA link down (SStatus 0 SControl 330) [ 2.943847] ata7: SATA link down (SStatus 0 SControl 300) [ 2.979986] usb 8-1: new full-speed USB device number 2 using ohci-pci [ 3.043981] usb 9-1: new low-speed USB device number 2 using ohci-pci [ 3.104009] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.104010] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.104040] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.104080] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.104143] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 3.104173] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.104277] ata6.00: configured for UDMA/133 [ 3.105240] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.105364] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 3.105517] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.105968] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.106013] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.106809] ata8.00: configured for UDMA/133 [ 3.106933] ata9.00: configured for UDMA/133 [ 3.107494] ata5.00: configured for UDMA/133 [ 3.107623] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.108110] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 3.112152] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.146281] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.178963] usb 8-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.178970] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.178973] usb 8-1: Product: USB Device [ 3.178974] usb 8-1: Manufacturer: COMPANY [ 3.196560] hid: raw HID events driver (C) Jiri Kosina [ 3.214945] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.214950] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.256643] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.256657] sd 0:0:0:0: [sda] Write Protect is off [ 3.256660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.256678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.256702] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.256892] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.257102] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.257106] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.257118] sd 4:0:0:0: [sdb] Write Protect is off [ 3.257121] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.257125] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.257138] sd 5:0:0:0: [sdc] Write Protect is off [ 3.257140] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.257141] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.257159] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.257168] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.257183] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.257929] sda: sda1 sda2 sda3 [ 3.258020] sdc: sdc1 sdc2 [ 3.258134] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.258169] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.271984] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.292155] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.326252] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.326460] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.326464] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.326478] sd 8:0:0:0: [sdd] Write Protect is off [ 3.326481] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.326503] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.326535] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.346104] sdd: sdd1 sdd2 [ 3.346358] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 3.639981] usb 8-2: new full-speed USB device number 3 using ohci-pci [ 3.644812] usb 2-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.644817] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.644819] usb 2-2: SerialNumber: ... [ 3.771981] usb 2-3: new high-speed USB device number 4 using ehci-pci [ 3.841060] usb 8-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.841073] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.841079] usb 8-2: Product: A4Tech Gaming Mouse [ 3.841083] usb 8-2: Manufacturer: PixArt [ 3.870370] usbcore: registered new interface driver usbhid [ 3.870373] usbhid: USB HID core driver [ 4.144759] usb 2-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 4.144763] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.144766] usb 2-3: SerialNumber: ... [ 4.618266] usb 9-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.618278] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.618284] usb 9-1: Product: NOVA AVR [ 4.618289] usb 9-1: Manufacturer: MGE UPS SYSTEMS [ 5.730182] sdb: sdb1 sdb2 sdb3 [ 5.730541] sd 4:0:0:0: [sdb] Attached SCSI disk [ 5.736917] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 5.796245] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 5.796418] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 5.796503] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 5.796830] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 5.856088] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 5.856240] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 5.856423] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:09DA:3519.0004/input/input6 [ 5.856504] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 5.856827] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:09DA:3519.0005/input/input8 [ 5.920146] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 7.152101] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-1/input0 [ 9.122921] [drm] amdgpu kernel modesetting enabled. [ 9.123047] amdgpu: Virtual CRAT table created for CPU [ 9.123069] amdgpu: Topology: Add CPU node [ 9.123362] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 9.123387] [drm] register mmio base: 0xFEA00000 [ 9.123389] [drm] register mmio size: 262144 [ 9.123450] [drm] add ip block number 0 <vi_common> [ 9.123453] [drm] add ip block number 1 <gmc_v8_0> [ 9.123454] [drm] add ip block number 2 <tonga_ih> [ 9.123456] [drm] add ip block number 3 <gfx_v8_0> [ 9.123457] [drm] add ip block number 4 <sdma_v3_0> [ 9.123458] [drm] add ip block number 5 <powerplay> [ 9.123460] [drm] add ip block number 6 <dm> [ 9.123461] [drm] add ip block number 7 <uvd_v6_0> [ 9.123462] [drm] add ip block number 8 <vce_v3_0> [ 9.123645] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 9.123695] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 9.123698] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 9.123752] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 9.123923] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 9.124048] [drm] UVD is enabled in VM mode [ 9.124049] [drm] UVD ENC is enabled in VM mode [ 9.124051] [drm] VCE enabled in VM mode [ 9.124086] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 9.125157] Console: switching to colour dummy device 80x25 [ 9.125163] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 9.125166] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 9.125202] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 9.125241] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 9.125544] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 9.125547] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 9.125555] [drm] Detected VRAM RAM=8192M, BAR=256M [ 9.125556] [drm] RAM width 256bits GDDR5 [ 9.125720] [drm] amdgpu: 8192M of VRAM memory ready [ 9.125723] [drm] amdgpu: 11998M of GTT memory ready. [ 9.125746] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 9.126127] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 9.126258] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 9.126445] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 9.126626] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 9.126712] [drm] Chained IB support enabled! [ 9.126740] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 9.127079] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 9.129409] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 9.132036] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 9.132240] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 9.135235] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 9.136395] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 9.137795] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 9.138810] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 9.449296] [drm] Display Core v3.2.259 initialized on DCE 11.2 [ 9.511683] [drm] UVD and UVD ENC initialized successfully. [ 9.621611] [drm] VCE initialized successfully. [ 9.622150] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 9.622164] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 9.625383] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 9.625985] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:01:00.0 on minor 0 [ 9.640417] fbcon: amdgpudrmfb (fb0) is primary device [ 9.728277] Console: switching to colour frame buffer device 160x64 [ 9.746211] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 9.883893] raid6: sse2x4 gen() 12259 MB/s [ 9.951895] raid6: sse2x2 gen() 11399 MB/s [ 10.019894] raid6: sse2x1 gen() 7814 MB/s [ 10.019896] raid6: using algorithm sse2x4 gen() 12259 MB/s [ 10.087892] raid6: .... xor() 4509 MB/s, rmw enabled [ 10.087894] raid6: using ssse3x2 recovery algorithm [ 10.089934] xor: automatically using best checksumming function avx [ 10.091416] async_tx: api initialized (async) [ 10.859977] random: crng init done [ 11.143276] Btrfs loaded, zoned=yes, fsverity=yes [ 23.944388] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 23.944405] floppy: error 10 while reading block 0 [ 24.272652] EXT4-fs (sda1): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 24.388737] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 25.238683] loop: module loaded [ 25.258815] EXT4-fs (sda1): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. Quota mode: none. [ 25.258971] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 25.259025] device-mapper: uevent: version 1.0.3 [ 25.259151] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 25.312263] lp: driver loaded but no devices found [ 25.320104] ppdev: user-space parallel port driver [ 25.499958] Asymmetric key parser 'pkcs8' registered [ 25.778219] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.778409] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 25.778786] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 25.778846] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 25.779012] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 25.779066] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 25.862717] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 25.867089] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 25.867227] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 25.867368] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 25.873914] acpi_cpufreq: overriding BIOS provided _PSD data [ 26.241622] mc: Linux media interface: v0.10 [ 26.386275] videodev: Linux video capture interface: v2.00 [ 26.412085] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 26.520523] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 26.583949] kvm_amd: TSC scaling supported [ 26.583955] kvm_amd: Nested Virtualization enabled [ 26.583957] kvm_amd: Nested Paging enabled [ 26.583965] kvm_amd: LBR virtualization supported [ 26.599172] MCE: In-kernel MCE decoding enabled. [ 26.616589] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 26.623059] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 26.623166] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 26.623275] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 26.623378] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 26.623481] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 26.642287] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 26.642300] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.642304] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 26.642307] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 26.642309] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 26.642312] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 26.642315] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 26.642317] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 26.642319] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 26.645530] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 26.645715] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 26.645725] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 26.662379] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 26.663455] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 26.663538] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 26.665117] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 26.665317] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 26.665537] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 26.665693] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 26.667459] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 26.684022] Registered IR keymap rc-avermedia-m135a [ 26.756929] IR NEC protocol handler initialized [ 26.758590] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 26.758909] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 26.759210] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 26.759509] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.759804] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 26.761702] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 26.762680] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 26.783950] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 26.784008] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 26.784060] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input16 [ 26.947908] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 26.947927] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 26.947937] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 26.947945] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947952] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 26.947959] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947967] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947974] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947981] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947988] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.947995] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.948003] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.948010] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.948018] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.948025] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.948033] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 27.008002] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 27.119984] tda829x 13-004b: setting tuner address to 60 [ 27.131610] usb 3-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 27.131615] usb 3-1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 27.131618] usb 3-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 27.136195] usb 3-1: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 27.136341] usb 3-1: Firmware revision 11.1 (signature 0x88e1) [ 27.223978] tda829x 13-004b: type set to tda8290+75a [ 27.726397] usbcore: registered new interface driver rtl8xxxu [ 27.735785] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 [ 28.099978] usb 2-2: set resolution quirk: cval->res = 384 [ 28.100508] usb 2-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 29.555981] usb 2-3: set resolution quirk: cval->res = 384 [ 29.556912] usbcore: registered new interface driver snd-usb-audio [ 29.557043] usb 2-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 29.600293] usbcore: registered new interface driver uvcvideo [ 31.484698] saa7134: saa7133[0]: registered device video4 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 31.485094] saa7134: saa7133[0]: registered device radio0 [ 31.512745] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 31.512840] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 36.369680] Process accounting resumed [ 36.462960] NET: Registered PF_ALG protocol family [ 36.546775] alg: No test for hmac(md4) (hmac(md4-generic)) [ 36.613435] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 37.003915] rc rc0: two consecutive events of type space [ 37.136703] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 (while UP) [ 37.857665] vboxdrv: loading out-of-tree module taints kernel. [ 37.857674] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 37.895285] vboxdrv: Found 8 processor cores/threads [ 37.916096] vboxdrv: TSC mode is Invariant, tentative frequency 3093347556 Hz [ 37.916102] vboxdrv: Successfully loaded version 7.0.18 r162988 (interface 0x00330004) [ 38.137805] VBoxNetFlt: Successfully started. [ 38.150874] VBoxNetAdp: Successfully started. [ 38.317768] NET: Registered PF_QIPCRTR protocol family [ 39.334195] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 39.334202] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 39.337069] wlxd037459855f3: authenticated [ 39.339923] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 39.344443] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=4) [ 39.346183] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 39.348442] wlxd037459855f3: associated [ 39.405687] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 40.249798] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 40.249805] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 40.249807] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 42.064004] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 42.716071] usb 2-3: reset high-speed USB device number 4 using ehci-pci [ 1945.585697] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1945.585716] floppy: error 10 while reading block 0 [ 2456.431635] Non-volatile memory driver v1.3 [ 2461.693699] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 2468.820323] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 2468.820345] floppy: error 10 while reading block 0 [ 2482.652298] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 2482.652317] floppy: error 10 while reading block 0 [ 2487.401116] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 2487.752056] Bluetooth: Core ver 2.22 [ 2487.752095] NET: Registered PF_BLUETOOTH protocol family [ 2487.752097] Bluetooth: HCI device and connection manager initialized [ 2487.752101] Bluetooth: HCI socket layer initialized [ 2487.752103] Bluetooth: L2CAP socket layer initialized [ 2487.752108] Bluetooth: SCO socket layer initialized [ 2501.975888] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 2501.975907] floppy: error 10 while reading block 0 [ 2504.496423] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 2506.105281] vdpauinfo:sh3[89385]: segfault at 8 ip 00007f7954743494 sp 00007f79473fb718 error 4 in libLLVM-15.so.1[7f7953200000+677c000] likely on CPU 3 (core 3, socket 0) [ 2506.105297] Code: ff 48 3d 00 08 00 00 0f 94 c0 64 48 8b 0c 25 28 00 00 00 48 3b 4c 24 10 75 05 48 83 c4 18 c3 e8 a2 6a 85 ff 66 90 48 8b 47 08 <80> 78 08 12 0f 94 c0 c3 0f 1f 40 00 48 8b 47 08 80 78 08 13 0f 94 [ 2595.074862] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2597.374583] watchdog: watchdog0: watchdog did not stop!