[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-16 [ 0.000000] Linux version 6.1.15-200.fc37.x86_64 (XXX@XXX) (gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4), GNU ld version 2.38-25.fc37) #1 SMP PREEMPT_DYNAMIC Fri Mar 3 17:29:44 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.1.15-200.fc37.x86_64 root=UUID=HASH_801-0BE1-8F11-513F-15A080AA4580 ro rootflags=subvol=root nomodeset rhgb quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 2032 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000075549fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007554a000-0x000000007554afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007554b000-0x000000007554bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007554c000-0x0000000089a0efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000089a0f000-0x0000000089e8efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000089e8f000-0x0000000089f1efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000089f1f000-0x000000008a41efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008a41f000-0x000000008affefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x72753018-0x72763057] usable ==> usable [ 0.000000] e820: update [mem 0x72753018-0x72763057] usable ==> usable [ 0.000000] e820: update [mem 0x72741018-0x72752857] usable ==> usable [ 0.000000] e820: update [mem 0x72741018-0x72752857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000005efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000060000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000072741017] usable [ 0.000000] reserve setup_data: [mem 0x0000000072741018-0x0000000072752857] usable [ 0.000000] reserve setup_data: [mem 0x0000000072752858-0x0000000072753017] usable [ 0.000000] reserve setup_data: [mem 0x0000000072753018-0x0000000072763057] usable [ 0.000000] reserve setup_data: [mem 0x0000000072763058-0x0000000075549fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007554a000-0x000000007554afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000007554b000-0x000000007554bfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007554c000-0x0000000089a0efff] usable [ 0.000000] reserve setup_data: [mem 0x0000000089a0f000-0x0000000089e8efff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000089e8f000-0x0000000089f1efff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000089f1f000-0x000000008a41efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000008a41f000-0x000000008affefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008afff000-0x000000008affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000008b000000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000086dffffff] usable [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x8a381000 ACPI=0x8a381000 SMBIOS=0x8ad18000 MEMATTR=0x843a5018 ESRT=0x867c9c18 MOKvar=0x8ad31000 RNG=0x89f1e018 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7B51/MPG Z390 GAMING PLUS (MS-7B51), BIOS 1.10 08/22/2018 [ 0.000000] tsc: Detected 3700.000 MHz processor [ 0.000000] tsc: Detected 3699.850 MHz TSC [ 0.000625] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000627] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000635] last_pfn = 0x86e000 max_arch_pfn = 0x400000000 [ 0.000720] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001140] last_pfn = 0x8b000 max_arch_pfn = 0x400000000 [ 0.007162] found SMP MP-table at [mem 0x000fcd20-0x000fcd2f] esrt: Reserving ESRT space from 0x00000000867c9c18 to 0x00000000867c9c50. [ 0.007176] e820: update [mem 0x867c9000-0x867c9fff] usable ==> reserved [ 0.007193] Using GB pages for direct mapping [ 0.007509] secureboot: Secure boot disabled [ 0.007509] RAMDISK: [mem 0x72764000-0x749bafff] ACPI: Early table checksum verification disabled [ 0.007516] ACPI: RSDP 0x000000008A381000 000024 (v02 ALASKA) [ 0.007519] ACPI: XSDT 0x000000008A3810A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007523] ACPI: FACP 0x000000008A3C0E90 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.007527] ACPI: DSDT 0x000000008A381200 03FC8F (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.007530] ACPI: FACS 0x000000008A41E080 000040 [ 0.007532] ACPI: APIC 0x000000008A3C0FA8 0000A0 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.007534] ACPI: FPDT 0x000000008A3C1048 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007536] ACPI: FIDT 0x000000008A3C1090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007538] ACPI: MCFG 0x000000008A3C1130 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.007540] ACPI: SSDT 0x000000008A3C1170 000378 (v01 SataRe SataTabl 00001000 INTL 20160527) [ 0.007543] ACPI: SSDT 0x000000008A3C14E8 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.007545] ACPI: SSDT 0x000000008A3C2CC0 0031C8 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.007547] ACPI: HPET 0x000000008A3C5E88 000038 (v01 INTEL A M I 00000002 01000013) [ 0.007549] ACPI: SSDT 0x000000008A3C5EC0 000F9E (v02 INTEL Ther_Rvp 00001000 INTL 20160527) [ 0.007552] ACPI: SSDT 0x000000008A3C6E60 00294F (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.007554] ACPI: UEFI 0x000000008A3C97B0 000048 (v01 ALASKA A M I 00000002 01000013) [ 0.007556] ACPI: LPIT 0x000000008A3C97F8 00005C (v01 INTEL A M I 00000002 01000013) [ 0.007558] ACPI: SSDT 0x000000008A3C9858 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527) [ 0.007560] ACPI: SSDT 0x000000008A3CC038 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527) [ 0.007563] ACPI: DBGP 0x000000008A3CD038 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.007565] ACPI: DBG2 0x000000008A3CD070 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.007567] ACPI: SSDT 0x000000008A3CD0C8 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.007569] ACPI: BGRT 0x000000008A3CD210 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007571] ACPI: WSMT 0x000000008A3CD248 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007573] ACPI: Reserving FACP table memory at [mem 0x8a3c0e90-0x8a3c0fa3] ACPI: Reserving DSDT table memory at [mem 0x8a381200-0x8a3c0e8e] ACPI: Reserving FACS table memory at [mem 0x8a41e080-0x8a41e0bf] ACPI: Reserving APIC table memory at [mem 0x8a3c0fa8-0x8a3c1047] ACPI: Reserving FPDT table memory at [mem 0x8a3c1048-0x8a3c108b] ACPI: Reserving FIDT table memory at [mem 0x8a3c1090-0x8a3c112b] ACPI: Reserving MCFG table memory at [mem 0x8a3c1130-0x8a3c116b] ACPI: Reserving SSDT table memory at [mem 0x8a3c1170-0x8a3c14e7] ACPI: Reserving SSDT table memory at [mem 0x8a3c14e8-0x8a3c2cbc] ACPI: Reserving SSDT table memory at [mem 0x8a3c2cc0-0x8a3c5e87] ACPI: Reserving HPET table memory at [mem 0x8a3c5e88-0x8a3c5ebf] ACPI: Reserving SSDT table memory at [mem 0x8a3c5ec0-0x8a3c6e5d] ACPI: Reserving SSDT table memory at [mem 0x8a3c6e60-0x8a3c97ae] ACPI: Reserving UEFI table memory at [mem 0x8a3c97b0-0x8a3c97f7] ACPI: Reserving LPIT table memory at [mem 0x8a3c97f8-0x8a3c9853] ACPI: Reserving SSDT table memory at [mem 0x8a3c9858-0x8a3cc035] ACPI: Reserving SSDT table memory at [mem 0x8a3cc038-0x8a3cd035] ACPI: Reserving DBGP table memory at [mem 0x8a3cd038-0x8a3cd06b] ACPI: Reserving DBG2 table memory at [mem 0x8a3cd070-0x8a3cd0c3] ACPI: Reserving SSDT table memory at [mem 0x8a3cd0c8-0x8a3cd20b] ACPI: Reserving BGRT table memory at [mem 0x8a3cd210-0x8a3cd247] ACPI: Reserving WSMT table memory at [mem 0x8a3cd248-0x8a3cd26f] No NUMA configuration found [ 0.007848] Faking a node at [mem 0x0000000000000000-0x000000086dffffff] NODE_DATA(0) allocated [mem 0x86dfd5000-0x86dffffff] Zone ranges: [ 0.042081] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000086dffffff] Device empty [ 0.042086] Movable zone start for each node [ 0.042088] Early memory node ranges [ 0.042088] node 0: [mem 0x0000000000001000-0x000000000005efff] node 0: [mem 0x0000000000060000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x0000000075549fff] node 0: [mem 0x000000007554c000-0x0000000089a0efff] node 0: [mem 0x000000008afff000-0x000000008affffff] node 0: [mem 0x0000000100000000-0x000000086dffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.042101] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.042118] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.044353] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.044404] On node 0, zone DMA32: 5616 pages in unavailable ranges [ 0.076660] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.076734] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.076747] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.077044] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.077045] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.077046] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.077046] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.077047] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.077048] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.077084] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.077086] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.077087] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.077091] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.077091] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.077096] e820: update [mem 0x842bc000-0x84318fff] usable ==> reserved [ 0.077107] TSC deadline timer available [ 0.077108] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.077123] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0005f000-0x0005ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x72741000-0x72741fff] PM: hibernation: Registered nosave memory: [mem 0x72752000-0x72752fff] PM: hibernation: Registered nosave memory: [mem 0x72753000-0x72753fff] PM: hibernation: Registered nosave memory: [mem 0x72763000-0x72763fff] PM: hibernation: Registered nosave memory: [mem 0x7554a000-0x7554afff] PM: hibernation: Registered nosave memory: [mem 0x7554b000-0x7554bfff] PM: hibernation: Registered nosave memory: [mem 0x842bc000-0x84318fff] PM: hibernation: Registered nosave memory: [mem 0x867c9000-0x867c9fff] PM: hibernation: Registered nosave memory: [mem 0x89a0f000-0x89e8efff] PM: hibernation: Registered nosave memory: [mem 0x89e8f000-0x89f1efff] PM: hibernation: Registered nosave memory: [mem 0x89f1f000-0x8a41efff] PM: hibernation: Registered nosave memory: [mem 0x8a41f000-0x8affefff] PM: hibernation: Registered nosave memory: [mem 0x8b000000-0x8fffffff] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.077149] Booting paravirtualized kernel on bare hardware [ 0.077151] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.081713] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.081833] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.081839] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.081841] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.081865] Fallback order for Node 0: 0 [ 0.081868] Built 1 zonelists, mobility grouping on. Total pages: 8223525 [ 0.081869] Policy zone: Normal [ 0.081870] Kernel command line: BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.1.15-200.fc37.x86_64 root=UUID=HASH_801-0BE1-8F11-513F-15A080AA4580 ro rootflags=subvol=root nomodeset rhgb quiet [ 0.081917] Booted with the nomodeset parameter. Only the system framebuffer will be available [ 0.081943] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.1.15-200.fc37.x86_64", will be passed to user space. [ 0.083075] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.083640] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.083780] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.083786] software IO TLB: area num 8. [ 0.136672] Memory: 32638680K/33416880K available (16393K kernel code, 3279K rwdata, 12456K rodata, 3032K init, 4580K bss, 777940K reserved, 0K cma-reserved) [ 0.136760] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.136770] ftrace: allocating 51140 entries in 200 pages [ 0.143638] ftrace: allocated 200 pages with 3 groups [ 0.144304] Dynamic Preempt: voluntary [ 0.144325] rcu: Preemptible hierarchical RCU implementation. [ 0.144326] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.144327] Trampoline variant of Tasks RCU enabled. [ 0.144327] Rude variant of Tasks RCU enabled. [ 0.144327] Tracing variant of Tasks RCU enabled. [ 0.144328] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.144329] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.148518] NR_IRQS: 524544, nr_irqs: 1536, preallocated irqs: 16 [ 0.148768] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.149002] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.149024] Console: colour dummy device 80x25 [ 0.149040] printk: console [tty0] enabled [ 0.149055] ACPI: Core revision 20220331 [ 0.149373] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.149463] APIC: Switch to symmetric I/O mode setup [ 0.150862] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.155948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.160416] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns [ 0.160420] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) [ 0.160422] pid_max: default: 32768 minimum: 301 [ 0.162283] LSM: Security Framework initializing [ 0.162291] Yama: becoming mindful. [ 0.162295] SELinux: Initializing. [ 0.162312] LSM support for eBPF active [ 0.162313] landlock: Up and running. [ 0.162357] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.162395] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.162559] x86/cpu: SGX disabled by BIOS. [ 0.162563] CPU0: Thermal monitoring enabled (TM1) [ 0.162599] process: using mwait in idle threads [ 0.162600] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.162601] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.162605] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.162606] Spectre V2 : Mitigation: Enhanced IBRS [ 0.162607] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.162607] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.162608] RETBleed: Mitigation: Enhanced IBRS [ 0.162609] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.162610] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.162613] TAA: Mitigation: TSX disabled [ 0.162614] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.162615] SRBDS: Mitigation: Microcode [ 0.178887] Freeing SMP alternatives memory: 44K [ 0.179473] smpboot: CPU0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xd) [ 0.179570] cblist_init_generic: Setting adjustable number of callback queues. [ 0.179571] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.179581] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.179590] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.179599] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.179615] ... version: 4 [ 0.179615] ... bit width: 48 [ 0.179616] ... generic registers: 8 [ 0.179616] ... value mask: 0000ffffffffffff [ 0.179617] ... max period: 00007fffffffffff [ 0.179617] ... fixed-purpose events: 3 [ 0.179618] ... event mask: 00000007000000ff [ 0.179702] Estimated ratio of average max frequency by base frequency (times 1024): 1217 [ 0.179716] rcu: Hierarchical SRCU implementation. [ 0.179716] rcu: Max phase no-delay instances is 400. [ 0.180174] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180220] smp: Bringing up secondary CPUs ... [ 0.180275] x86: Booting SMP configuration: [ 0.180276] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.187826] smp: Brought up 1 node, 6 CPUs [ 0.187826] smpboot: Max logical packages: 1 [ 0.187826] smpboot: Total of 6 processors activated (44398.20 BogoMIPS) [ 0.189217] devtmpfs: initialized [ 0.189217] x86/mm: Memory block size: 128MB [ 0.190844] ACPI: PM: Registering ACPI NVS region [mem 0x7554a000-0x7554afff] (4096 bytes) [ 0.190846] ACPI: PM: Registering ACPI NVS region [mem 0x89f1f000-0x8a41efff] (5242880 bytes) [ 0.190922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.190926] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190961] pinctrl core: initialized pinctrl subsystem [ 0.191177] PM: RTC time: 21:07:42, date: 2023-03-13 [ 0.191412] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.191489] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.191496] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.191501] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.191586] thermal_sys: Registered thermal governor 'fair_share' [ 0.191587] thermal_sys: Registered thermal governor 'bang_bang' [ 0.191587] thermal_sys: Registered thermal governor 'step_wise' [ 0.191588] thermal_sys: Registered thermal governor 'user_space' [ 0.191598] cpuidle: using governor menu [ 0.191628] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.191628] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.191628] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.191628] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.191628] PCI: Using configuration type 1 for base access [ 0.193046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.195445] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.195445] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.195445] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.195445] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.195535] cryptd: max_cpu_qlen set to 1000 [ 0.195535] raid6: skipped pq benchmark and selected avx2x4 [ 0.195535] raid6: using avx2x2 recovery algorithm [ 0.195535] ACPI: Added _OSI(Module Device) [ 0.195535] ACPI: Added _OSI(Processor Device) [ 0.195535] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.195535] ACPI: Added _OSI(Processor Aggregator Device) [ 0.235045] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.241019] ACPI: Dynamic OEM Table Load: [ 0.241024] ACPI: SSDT 0xFFFF8BEE409D2800 0007AD (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.241745] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.242692] ACPI: Dynamic OEM Table Load: [ 0.242696] ACPI: SSDT 0xFFFF8BEE410BB800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.243580] ACPI: Dynamic OEM Table Load: [ 0.243585] ACPI: SSDT 0xFFFF8BEE409C9000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.244650] ACPI: Dynamic OEM Table Load: [ 0.244654] ACPI: SSDT 0xFFFF8BEE410B9400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.245340] ACPI: Dynamic OEM Table Load: [ 0.245344] ACPI: SSDT 0xFFFF8BEE410B8C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.248079] ACPI: Interpreter enabled [ 0.248113] ACPI: PM: (supports S0 S3 S4 S5) [ 0.248114] ACPI: Using IOAPIC for interrupt routing [ 0.248143] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248144] PCI: Using E820 reservations for host bridge windows [ 0.248860] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.256518] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.256523] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS06._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.256932] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.256935] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.257709] ACPI: PM: Power Resource [USBC] ACPI: PM: Power Resource [V0PR] ACPI: PM: Power Resource [V1PR] ACPI: PM: Power Resource [V2PR] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [FN00] ACPI: PM: Power Resource [FN01] ACPI: PM: Power Resource [FN02] ACPI: PM: Power Resource [FN03] ACPI: PM: Power Resource [FN04] ACPI: PM: Power Resource [PIN] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.266710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.267836] PCI host bridge to bus 0000:00 [ 0.267837] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 [ 0.267971] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000 [ 0.267977] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.267997] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.268162] pci 0000:00:08.0: reg 0x10: [mem 0xa113e000-0xa113efff 64bit] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 [ 0.268340] pci 0000:00:12.0: reg 0x10: [mem 0xa113d000-0xa113dfff 64bit] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 0.268571] pci 0000:00:14.0: reg 0x10: [mem 0xa1120000-0xa112ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.269969] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 0.269992] pci 0000:00:14.2: reg 0x10: [mem 0xa1136000-0xa1137fff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0xa113c000-0xa113cfff 64bit] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 0.270184] pci 0000:00:16.0: reg 0x10: [mem 0xa113b000-0xa113bfff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.270705] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 0.270724] pci 0000:00:17.0: reg 0x10: [mem 0xa1134000-0xa1135fff] pci 0000:00:17.0: reg 0x14: [mem 0xa113a000-0xa113a0ff] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f] pci 0000:00:17.0: reg 0x24: [mem 0xa1139000-0xa11397ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.271309] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100 [ 0.271747] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 0.271804] pci 0000:00:1f.3: reg 0x10: [mem 0xa1130000-0xa1133fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.274571] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 0.274617] pci 0000:00:1f.4: reg 0x10: [mem 0xa1138000-0xa11380ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 0.274925] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000 [ 0.275111] pci 0000:00:1f.6: reg 0x10: [mem 0xa1100000-0xa111ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.276363] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.276386] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.276408] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.276431] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.276453] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.276475] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.276496] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.276518] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.280864] iommu: Default domain type: Translated [ 0.280864] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.280864] SCSI subsystem initialized [ 0.280864] libata version 3.00 loaded. [ 0.280864] ACPI: bus type USB registered [ 0.280864] usbcore: registered new interface driver usbfs [ 0.280864] usbcore: registered new interface driver hub [ 0.280864] usbcore: registered new device driver usb [ 0.280864] pps_core: LinuxPPS API ver. 1 registered [ 0.280864] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.280864] PTP clock support registered [ 0.280864] EDAC MC: Ver: 3.0.0 [ 0.280864] Registered efivars operations [ 0.280864] NetLabel: Initializing [ 0.280864] NetLabel: domain hash size = 128 [ 0.280864] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.280864] NetLabel: unlabeled traffic allowed by default [ 0.280864] mctp: management component transport protocol core [ 0.280864] NET: Registered PF_MCTP protocol family [ 0.280864] PCI: Using ACPI for IRQ routing [ 0.367876] PCI: pci_cache_line_size set to 64 bytes [ 0.367942] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff] e820: reserve RAM buffer [mem 0x72741018-0x73ffffff] e820: reserve RAM buffer [mem 0x72753018-0x73ffffff] e820: reserve RAM buffer [mem 0x7554a000-0x77ffffff] e820: reserve RAM buffer [mem 0x842bc000-0x87ffffff] e820: reserve RAM buffer [mem 0x867c9000-0x87ffffff] e820: reserve RAM buffer [mem 0x89a0f000-0x8bffffff] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.367971] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.367971] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.367971] vgaarb: loaded [ 0.367971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.367971] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.369435] clocksource: Switched to clocksource tsc-early [ 0.377171] VFS: Disk quotas dquot_6.6.0 [ 0.377178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.377221] pnp: PnP ACPI init [ 0.377405] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.377407] system 00:00: [io 0x0a10-0x0a1f] has been reserved [ 0.377408] system 00:00: [io 0x0a20-0x0a2f] has been reserved [ 0.377409] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.377845] pnp 00:01: [dma 0 disabled] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.377943] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.378017] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.378126] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.378128] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.378130] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.378131] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.378132] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.378133] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.378135] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.378136] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.378291] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.378293] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.378294] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.378295] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.378296] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.378298] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.378299] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.378513] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.378693] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.378695] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 0.378696] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 0.378697] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 0.379840] pnp: PnP ACPI: found 10 devices [ 0.385141] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.385188] NET: Registered PF_INET protocol family [ 0.385292] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.387433] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.387455] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.387467] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.387623] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.387823] TCP: Hash tables configured (established 262144 bind 65536) [ 0.387898] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.387950] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.387994] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.388057] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.388062] NET: Registered PF_XDP protocol family [ 0.388066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] PCI: CLS 64 bytes, default 64 [ 0.388373] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.388373] software IO TLB: mapped [mem 0x00000000802bc000-0x00000000842bc000] (64MB) [ 0.388397] Trying to unpack rootfs image as initramfs... [ 0.389009] Initialise system trusted keyrings [ 0.389015] Key type blacklist registered [ 0.389036] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.390317] zbud: loaded [ 0.390771] integrity: Platform Keyring initialized [ 0.390774] integrity: Machine keyring initialized [ 0.396843] NET: Registered PF_ALG protocol family [ 0.396845] xor: automatically using best checksumming function avx [ 0.396846] Key type asymmetric registered [ 0.396847] Asymmetric key parser 'x509' registered [ 0.709988] Freeing initrd memory: 35164K [ 0.712619] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.712634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.712657] io scheduler mq-deadline registered [ 0.712659] io scheduler kyber registered [ 0.712683] io scheduler bfq registered [ 0.713796] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.713986] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.714335] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.714350] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.714380] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.714422] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.714862] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.715087] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.715162] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.716202] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.717110] Non-volatile memory driver v1.3 [ 0.717114] Linux agpgart interface v0.103 [ 0.717211] ACPI: bus type drm_connector registered [ 0.718280] ahci 0000:00:17.0: version 3.0 [ 0.728553] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.728556] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst [ 0.743927] scsi host0: ahci [ 0.744182] scsi host1: ahci [ 0.744429] scsi host2: ahci [ 0.744583] scsi host3: ahci [ 0.744700] scsi host4: ahci [ 0.744840] scsi host5: ahci [ 0.744868] ata1: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139100 irq 120 [ 0.744870] ata2: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139180 irq 120 [ 0.744872] ata3: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139200 irq 120 [ 0.744874] ata4: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139280 irq 120 [ 0.744876] ata5: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139300 irq 120 [ 0.744878] ata6: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139380 irq 120 [ 0.745202] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.745223] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.746295] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 0.746491] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.746543] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.746545] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.746573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.746575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.746576] usb usb1: Product: xHCI Host Controller [ 0.746577] usb usb1: Manufacturer: Linux 6.1.15-200.fc37.x86_64 xhci-hcd [ 0.746577] usb usb1: SerialNumber: ... [ 0.746699] hub 1-0:1.0: USB hub found [ 0.746714] hub 1-0:1.0: 16 ports detected [ 0.747065] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.747069] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS06._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.747080] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.747083] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.HS06._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.747869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.747871] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.747873] usb usb2: Product: xHCI Host Controller [ 0.747873] usb usb2: Manufacturer: Linux 6.1.15-200.fc37.x86_64 xhci-hcd [ 0.747874] usb usb2: SerialNumber: ... [ 0.747963] hub 2-0:1.0: USB hub found [ 0.747975] hub 2-0:1.0: 10 ports detected [ 0.748065] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.748069] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.748080] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.748083] ACPI Error: Aborting method \_SB.PCI0.XHC.RHUB.SS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.748589] usb: port power management may be unreliable [ 0.748762] usbcore: registered new interface driver usbserial_generic [ 0.748765] usbserial: USB Serial support registered for generic [ 0.748790] i8042: PNP: No PS/2 controller found. [ 0.748841] mousedev: PS/2 mouse device common for all mice [ 0.749025] rtc_cmos 00:03: RTC can wake from S4 [ 0.749916] rtc_cmos 00:03: registered as rtc0 [ 0.750077] rtc_cmos 00:03: setting system clock to 2023-03-13T21:07:43 UTC (1678741663) [ 0.750104] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 0.750290] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.750302] device-mapper: uevent: version 1.0.3 [ 0.750363] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.750450] intel_pstate: Intel P-state driver initializing [ 0.750743] intel_pstate: Disabling energy efficiency optimization [ 0.750743] intel_pstate: HWP enabled [ 0.750978] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.751154] fbcon: Deferring console take-over [ 0.751155] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.751174] hid: raw HID events driver (C) Jiri Kosina [ 0.751190] usbcore: registered new interface driver usbhid [ 0.751191] usbhid: USB HID core driver [ 0.751218] intel_pmc_core INT33A1:00: initialized [ 0.751293] drop_monitor: Initializing network drop monitor service [ 0.759302] Initializing XFRM netlink socket [ 0.759365] NET: Registered PF_INET6 protocol family [ 0.762102] Segment Routing with IPv6 [ 0.762103] RPL Segment Routing with IPv6 [ 0.762107] In-situ OAM (IOAM) with IPv6 [ 0.762120] mip6: Mobile IPv6 [ 0.762122] NET: Registered PF_PACKET protocol family [ 0.762668] microcode: sig=0x906ed, pf=0x2, revision=0xf0 [ 0.762787] microcode: Microcode Update Driver: v2.2. [ 0.762791] IPI shorthand broadcast: enabled [ 0.762795] AVX2 version of gcm_enc/dec engaged. [ 0.763056] AES CTR mode by8 optimization enabled [ 0.763273] sched_clock: Marking stable (758774357, 4483861)->(847198993, -83940775) [ 0.763375] registered taskstats version 1 [ 0.763434] Loading compiled-in X.509 certificates [ 0.769605] Loaded X.509 cert 'Fedora kernel signing key: 60b8ad489ce3b1a4bdb6ea4ce49bd9874a2668a2' [ 0.769847] zswap: loaded using pool lzo/zbud [ 0.770104] page_owner is disabled [ 0.770191] Key type .fscrypt registered [ 0.770191] Key type fscrypt-provisioning registered [ 0.770394] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 0.770403] Key type big_key registered [ 0.772379] Key type encrypted registered [ 0.773236] ima: No TPM chip found, activating TPM-bypass! [ 0.773239] Loading compiled-in module X.509 certificates [ 0.773606] Loaded X.509 cert 'Fedora kernel signing key: 60b8ad489ce3b1a4bdb6ea4ce49bd9874a2668a2' [ 0.773608] ima: Allocated hash algorithm: sha256 [ 0.773614] ima: No architecture policies found [ 0.773621] evm: Initialising EVM extended attributes: [ 0.773621] evm: security.selinux [ 0.773622] evm: security.SMACK64 (disabled) [ 0.773622] evm: security.SMACK64EXEC (disabled) [ 0.773623] evm: security.SMACK64TRANSMUTE (disabled) [ 0.773623] evm: security.SMACK64MMAP (disabled) [ 0.773623] evm: security.apparmor (disabled) [ 0.773624] evm: security.ima [ 0.773624] evm: security.capability [ 0.773625] evm: HMAC attrs: 0x1 [ 0.806647] alg: No test for 842 (842-scomp) [ 0.806668] alg: No test for 842 (842-generic) [ 0.902806] PM: Magic number: 15:251:146 [ 0.902812] hub 1-0:1.0: hash matches [ 0.902817] ata_port ata3: hash matches [ 0.902818] ata3: hash matches [ 0.902852] acpi device:17: hash matches [ 0.902907] RAS: Correctable Errors collector initialized. [ 0.987506] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 1.054520] ata4: SATA link down (SStatus 4 SControl 300) [ 1.054562] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.054612] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.054660] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.054698] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.054747] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.062175] ata3.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.062197] ata3.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.062216] ata2.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.062229] ata2.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.062401] ata2.00: supports DRM functions and may not be fully accessible [ 1.062408] ata2.00: ATA-10: CT500MX500SSD4, M3CR023, max UDMA/133 [ 1.062486] ata3.00: ATA-10: TOSHIBA THNSN81Q92CSE, 8EET6101, max UDMA/100 [ 1.062511] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.062620] ata3.00: 3750748848 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.064384] ata3.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.064397] ata3.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.064656] ata3.00: configured for UDMA/100 [ 1.064815] ata2.00: Features: Trust Dev-Sleep [ 1.066514] ata2.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.066526] ata2.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.066658] ata2.00: supports DRM functions and may not be fully accessible [ 1.067895] ata2.00: configured for UDMA/133 [ 1.069229] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.069241] ata1.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.069832] ata1.00: supports DRM functions and may not be fully accessible [ 1.069839] ata1.00: ATA-9: WDC WD120EDAZ-11F3RA0, 81.00A81, max UDMA/133 [ 1.078240] ata1.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.080530] ata1.00: Features: Trust NCQ-sndrcv NCQ-prio [ 1.087889] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.087902] ata1.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.088484] ata1.00: supports DRM functions and may not be fully accessible [ 1.099407] ata1.00: configured for UDMA/133 [ 1.099730] scsi 0:0:0:0: Direct-Access ATA WDC WD120EDAZ-11 0A81 PQ: 0 ANSI: 5 [ 1.100737] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.100954] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 1.100963] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.100998] sd 0:0:0:0: [sda] Write Protect is off [ 1.101005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.101125] scsi 1:0:0:0: Direct-Access ATA CT500MX500SSD4 023 PQ: 0 ANSI: 5 [ 1.101158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.101368] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.101851] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.102046] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.102055] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.102090] sd 1:0:0:0: [sdb] Write Protect is off [ 1.102099] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.102205] scsi 2:0:0:0: Direct-Access ATA TOSHIBA THNSN81Q 6101 PQ: 0 ANSI: 5 [ 1.102206] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.102402] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.102872] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.103025] sd 2:0:0:0: [sdc] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 1.103064] sd 2:0:0:0: [sdc] Write Protect is off [ 1.103071] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.103182] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.103288] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 1.106770] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.106782] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.107300] ata6.00: ATA-11: WDC WD160EMFZ-11AFXA0, 81.00A81, max UDMA/133 [ 1.110058] ata6.00: 31251759104 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.110284] ata6.00: Features: NCQ-sndrcv NCQ-prio [ 1.110782] sdb: sdb1 sdb2 sdb3 [ 1.111363] sd 1:0:0:0: [sdb] supports TCG Opal [ 1.111372] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.112594] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.112607] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.114043] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.114055] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.114449] ata5.00: ATA-11: WDC WD160EMFZ-11AFXA0, 81.00A81, max UDMA/133 [ 1.115858] ata6.00: configured for UDMA/133 [ 1.115966] usb 1-4: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04 [ 1.115977] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.115983] usb 1-4: Product: USB2.0 Hub [ 1.115987] usb 1-4: Manufacturer: VIA Labs, Inc. [ 1.116893] ata5.00: 31251759104 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.117092] ata5.00: Features: NCQ-sndrcv NCQ-prio [ 1.117568] hub 1-4:1.0: USB hub found [ 1.117744] hub 1-4:1.0: 4 ports detected [ 1.119393] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.119403] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.122565] ata5.00: configured for UDMA/133 [ 1.122838] scsi 4:0:0:0: Direct-Access ATA WDC WD160EMFZ-11 0A81 PQ: 0 ANSI: 5 [ 1.123794] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.124032] scsi 5:0:0:0: Direct-Access ATA WDC WD160EMFZ-11 0A81 PQ: 0 ANSI: 5 [ 1.124079] sd 4:0:0:0: [sdd] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) [ 1.124088] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 1.124177] sd 4:0:0:0: [sdd] Write Protect is off [ 1.124186] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.124357] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.124589] sd 4:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 1.124667] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.124875] sd 5:0:0:0: [sde] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) [ 1.124883] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 1.124953] sd 5:0:0:0: [sde] Write Protect is off [ 1.124962] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.125130] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.125381] sd 5:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 1.134706] ata3.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0 [ 1.134717] ata3.00: irq_stat 0x40000001 [ 1.134726] ata3.00: failed command: READ FPDMA QUEUED [ 1.134729] ata3.00: cmd 60/08:c0:00:00:00/00:00:00:00:00/40 tag 24 ncq dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) <F> [ 1.134747] ata3.00: status: { DRDY ERR } [ 1.134751] ata3.00: error: { ABRT } [ 1.135366] ata3.00: configured for UDMA/100 [ 1.135385] ata3: EH complete [ 1.145670] ata3.00: NCQ disabled due to excessive errors [ 1.145678] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 1.145684] ata3.00: irq_stat 0x40000001 [ 1.145689] ata3.00: failed command: READ FPDMA QUEUED [ 1.145693] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) <F> [ 1.145709] ata3.00: status: { DRDY ERR } [ 1.145713] ata3.00: error: { ABRT } [ 1.146577] ata3.00: configured for UDMA/100 [ 1.146599] ata3: EH complete [ 1.156496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.156506] ata3.00: irq_stat 0x40000001 [ 1.156512] ata3.00: failed command: READ DMA [ 1.156515] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.156532] ata3.00: status: { DRDY ERR } [ 1.156536] ata3.00: error: { ABRT } [ 1.157362] ata3.00: configured for UDMA/100 [ 1.157383] ata3: EH complete [ 1.167527] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.167538] ata3.00: irq_stat 0x40000001 [ 1.167543] ata3.00: failed command: READ DMA [ 1.167547] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 2 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.167564] ata3.00: status: { DRDY ERR } [ 1.167568] ata3.00: error: { ABRT } [ 1.168263] sda: sda1 [ 1.168377] ata3.00: configured for UDMA/100 [ 1.168399] ata3: EH complete [ 1.169613] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.179498] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.179508] ata3.00: irq_stat 0x40000001 [ 1.179514] ata3.00: failed command: READ DMA [ 1.179517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.179534] ata3.00: status: { DRDY ERR } [ 1.179538] ata3.00: error: { ABRT } [ 1.180372] ata3.00: configured for UDMA/100 [ 1.180392] ata3: EH complete [ 1.190496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.190507] ata3.00: irq_stat 0x40000001 [ 1.190512] ata3.00: failed command: READ DMA [ 1.190516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.190532] ata3.00: status: { DRDY ERR } [ 1.190537] ata3.00: error: { ABRT } [ 1.191436] ata3.00: configured for UDMA/100 [ 1.191460] sd 2:0:0:0: [sdc] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.191468] sd 2:0:0:0: [sdc] tag#4 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#4 Add. Sense: Unaligned write command [ 1.191480] sd 2:0:0:0: [sdc] tag#4 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.191483] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.191492] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.191505] ata3: EH complete [ 1.195056] sde: sde1 [ 1.195174] sdd: sdd1 [ 1.195334] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.195442] sd 4:0:0:0: [sdd] Attached SCSI disk [ 1.212532] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.212542] ata3.00: irq_stat 0x40000001 [ 1.212551] ata3.00: failed command: READ DMA [ 1.212555] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 25 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.212571] ata3.00: status: { DRDY ERR } [ 1.212575] ata3.00: error: { ABRT } [ 1.213402] ata3.00: configured for UDMA/100 [ 1.213438] ata3: EH complete [ 1.222496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.222507] ata3.00: irq_stat 0x40000001 [ 1.222512] ata3.00: failed command: READ DMA [ 1.222516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.222532] ata3.00: status: { DRDY ERR } [ 1.222537] ata3.00: error: { ABRT } [ 1.223436] ata3.00: configured for UDMA/100 [ 1.223458] ata3: EH complete [ 1.229682] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd [ 1.232496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.232507] ata3.00: irq_stat 0x40000001 [ 1.232513] ata3.00: failed command: READ DMA [ 1.232516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 6 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.232533] ata3.00: status: { DRDY ERR } [ 1.232537] ata3.00: error: { ABRT } [ 1.233439] ata3.00: configured for UDMA/100 [ 1.233461] ata3: EH complete [ 1.242501] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.242511] ata3.00: irq_stat 0x40000001 [ 1.242518] ata3.00: failed command: READ DMA [ 1.242521] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.242538] ata3.00: status: { DRDY ERR } [ 1.242542] ata3.00: error: { ABRT } [ 1.243439] ata3.00: configured for UDMA/100 [ 1.243461] ata3: EH complete [ 1.252496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.252506] ata3.00: irq_stat 0x40000001 [ 1.252513] ata3.00: failed command: READ DMA [ 1.252516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 9 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.252532] ata3.00: status: { DRDY ERR } [ 1.252537] ata3.00: error: { ABRT } [ 1.253444] ata3.00: configured for UDMA/100 [ 1.253466] ata3: EH complete [ 1.262496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.262506] ata3.00: irq_stat 0x40000001 [ 1.262513] ata3.00: failed command: READ DMA [ 1.262516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.262533] ata3.00: status: { DRDY ERR } [ 1.262538] ata3.00: error: { ABRT } [ 1.263439] ata3.00: configured for UDMA/100 [ 1.263463] sd 2:0:0:0: [sdc] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.263471] sd 2:0:0:0: [sdc] tag#10 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#10 Add. Sense: Unaligned write command [ 1.263482] sd 2:0:0:0: [sdc] tag#10 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.263485] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.263494] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.263507] ata3: EH complete [ 1.269754] usb 2-6: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04 [ 1.269766] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.269772] usb 2-6: Product: USB3.0 Hub [ 1.269776] usb 2-6: Manufacturer: VIA Labs, Inc. [ 1.272006] hub 2-6:1.0: USB hub found [ 1.272291] hub 2-6:1.0: 4 ports detected [ 1.283529] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.283539] ata3.00: irq_stat 0x40000001 [ 1.283547] ata3.00: failed command: READ DMA [ 1.283551] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.283568] ata3.00: status: { DRDY ERR } [ 1.283572] ata3.00: error: { ABRT } [ 1.284454] ata3.00: configured for UDMA/100 [ 1.284475] ata3: EH complete [ 1.293496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.293507] ata3.00: irq_stat 0x40000001 [ 1.293513] ata3.00: failed command: READ DMA [ 1.293517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 11 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.293534] ata3.00: status: { DRDY ERR } [ 1.293538] ata3.00: error: { ABRT } [ 1.294438] ata3.00: configured for UDMA/100 [ 1.294459] ata3: EH complete [ 1.304500] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.304511] ata3.00: irq_stat 0x40000001 [ 1.304518] ata3.00: failed command: READ DMA [ 1.304522] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 12 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.304539] ata3.00: status: { DRDY ERR } [ 1.304543] ata3.00: error: { ABRT } [ 1.305375] ata3.00: configured for UDMA/100 [ 1.305395] ata3: EH complete [ 1.314500] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.314510] ata3.00: irq_stat 0x40000001 [ 1.314517] ata3.00: failed command: READ DMA [ 1.314521] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 13 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.314538] ata3.00: status: { DRDY ERR } [ 1.314542] ata3.00: error: { ABRT } [ 1.315379] ata3.00: configured for UDMA/100 [ 1.315400] ata3: EH complete [ 1.324496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.324506] ata3.00: irq_stat 0x40000001 [ 1.324513] ata3.00: failed command: READ DMA [ 1.324517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 14 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.324534] ata3.00: status: { DRDY ERR } [ 1.324538] ata3.00: error: { ABRT } [ 1.325435] ata3.00: configured for UDMA/100 [ 1.325456] ata3: EH complete [ 1.334497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.334507] ata3.00: irq_stat 0x40000001 [ 1.334515] ata3.00: failed command: READ DMA [ 1.334518] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 15 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.334535] ata3.00: status: { DRDY ERR } [ 1.334539] ata3.00: error: { ABRT } [ 1.335438] ata3.00: configured for UDMA/100 [ 1.335461] sd 2:0:0:0: [sdc] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.335469] sd 2:0:0:0: [sdc] tag#15 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#15 Add. Sense: Unaligned write command [ 1.335480] sd 2:0:0:0: [sdc] tag#15 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.335483] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.335492] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.335504] ata3: EH complete [ 1.335544] ldm_validate_partition_table(): Disk read failed. [ 1.355531] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.355542] ata3.00: irq_stat 0x40000001 [ 1.355551] ata3.00: failed command: READ DMA [ 1.355554] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 27 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.355570] ata3.00: status: { DRDY ERR } [ 1.355574] ata3.00: error: { ABRT } [ 1.356460] ata3.00: configured for UDMA/100 [ 1.356481] ata3: EH complete [ 1.365497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.365507] ata3.00: irq_stat 0x40000001 [ 1.365515] ata3.00: failed command: READ DMA [ 1.365518] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.365534] ata3.00: status: { DRDY ERR } [ 1.365539] ata3.00: error: { ABRT } [ 1.366440] ata3.00: configured for UDMA/100 [ 1.366461] ata3: EH complete [ 1.380496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.380507] ata3.00: irq_stat 0x40000001 [ 1.380515] ata3.00: failed command: READ DMA [ 1.380518] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 17 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.380535] ata3.00: status: { DRDY ERR } [ 1.380539] ata3.00: error: { ABRT } [ 1.381434] ata3.00: configured for UDMA/100 [ 1.381456] ata3: EH complete [ 1.383487] usb 1-11: new high-speed USB device number 3 using xhci_hcd [ 1.390501] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.390511] ata3.00: irq_stat 0x40000001 [ 1.390519] ata3.00: failed command: READ DMA [ 1.390522] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.390539] ata3.00: status: { DRDY ERR } [ 1.390543] ata3.00: error: { ABRT } [ 1.391374] ata3.00: configured for UDMA/100 [ 1.391395] ata3: EH complete [ 1.400498] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.400509] ata3.00: irq_stat 0x40000001 [ 1.400514] tsc: Refined TSC clocksource calibration: 3696.001 MHz [ 1.400517] ata3.00: failed command: READ DMA [ 1.400521] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 19 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.400529] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2ad56ed, max_idle_ns: 881591064802 ns [ 1.400544] ata3.00: status: { DRDY ERR } [ 1.400550] ata3.00: error: { ABRT } [ 1.400612] clocksource: Switched to clocksource tsc [ 1.401458] ata3.00: configured for UDMA/100 [ 1.401479] ata3: EH complete [ 1.410497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.410508] ata3.00: irq_stat 0x40000001 [ 1.410516] ata3.00: failed command: READ DMA [ 1.410520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 20 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.410536] ata3.00: status: { DRDY ERR } [ 1.410540] ata3.00: error: { ABRT } [ 1.411441] ata3.00: configured for UDMA/100 [ 1.411465] sd 2:0:0:0: [sdc] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.411472] sd 2:0:0:0: [sdc] tag#20 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#20 Add. Sense: Unaligned write command [ 1.411483] sd 2:0:0:0: [sdc] tag#20 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.411486] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.411495] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.411507] ata3: EH complete [ 1.431529] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.431539] ata3.00: irq_stat 0x40000001 [ 1.431548] ata3.00: failed command: READ DMA [ 1.431552] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.431569] ata3.00: status: { DRDY ERR } [ 1.431573] ata3.00: error: { ABRT } [ 1.432458] ata3.00: configured for UDMA/100 [ 1.432479] ata3: EH complete [ 1.441497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.441507] ata3.00: irq_stat 0x40000001 [ 1.441516] ata3.00: failed command: READ DMA [ 1.441519] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.441535] ata3.00: status: { DRDY ERR } [ 1.441540] ata3.00: error: { ABRT } [ 1.442438] ata3.00: configured for UDMA/100 [ 1.442460] ata3: EH complete [ 1.451497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.451508] ata3.00: irq_stat 0x40000001 [ 1.451516] ata3.00: failed command: READ DMA [ 1.451520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.451537] ata3.00: status: { DRDY ERR } [ 1.451541] ata3.00: error: { ABRT } [ 1.452443] ata3.00: configured for UDMA/100 [ 1.452464] ata3: EH complete [ 1.461502] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.461513] ata3.00: irq_stat 0x40000001 [ 1.461521] ata3.00: failed command: READ DMA [ 1.461525] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.461541] ata3.00: status: { DRDY ERR } [ 1.461546] ata3.00: error: { ABRT } [ 1.462378] ata3.00: configured for UDMA/100 [ 1.462399] ata3: EH complete [ 1.471497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.471508] ata3.00: irq_stat 0x40000001 [ 1.471517] ata3.00: failed command: READ DMA [ 1.471520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 29 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.471537] ata3.00: status: { DRDY ERR } [ 1.471542] ata3.00: error: { ABRT } [ 1.472445] ata3.00: configured for UDMA/100 [ 1.472466] ata3: EH complete [ 1.481498] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.481508] ata3.00: irq_stat 0x40000001 [ 1.481517] ata3.00: failed command: READ DMA [ 1.481521] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.481537] ata3.00: status: { DRDY ERR } [ 1.481541] ata3.00: error: { ABRT } [ 1.482443] ata3.00: configured for UDMA/100 [ 1.482467] sd 2:0:0:0: [sdc] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.482475] sd 2:0:0:0: [sdc] tag#30 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#30 Add. Sense: Unaligned write command [ 1.482486] sd 2:0:0:0: [sdc] tag#30 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.482489] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.482497] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.482509] ata3: EH complete [ 1.502530] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.502541] ata3.00: irq_stat 0x40000001 [ 1.502550] ata3.00: failed command: READ DMA [ 1.502553] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 31 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.502570] ata3.00: status: { DRDY ERR } [ 1.502575] ata3.00: error: { ABRT } [ 1.503464] ata3.00: configured for UDMA/100 [ 1.503485] ata3: EH complete [ 1.511067] usb 1-11: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04 [ 1.511079] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.511085] usb 1-11: Product: USB2.0 Hub [ 1.511089] usb 1-11: Manufacturer: VIA Labs, Inc. [ 1.512665] hub 1-11:1.0: USB hub found [ 1.512867] hub 1-11:1.0: 4 ports detected [ 1.516501] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.516511] ata3.00: irq_stat 0x40000001 [ 1.516516] ata3.00: failed command: READ DMA [ 1.516520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.516536] ata3.00: status: { DRDY ERR } [ 1.516540] ata3.00: error: { ABRT } [ 1.517440] ata3.00: configured for UDMA/100 [ 1.517462] ata3: EH complete [ 1.526497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.526507] ata3.00: irq_stat 0x40000001 [ 1.526513] ata3.00: failed command: READ DMA [ 1.526517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.526533] ata3.00: status: { DRDY ERR } [ 1.526538] ata3.00: error: { ABRT } [ 1.527447] ata3.00: configured for UDMA/100 [ 1.527468] ata3: EH complete [ 1.536497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.536507] ata3.00: irq_stat 0x40000001 [ 1.536513] ata3.00: failed command: READ DMA [ 1.536516] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 2 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.536533] ata3.00: status: { DRDY ERR } [ 1.536537] ata3.00: error: { ABRT } [ 1.537444] ata3.00: configured for UDMA/100 [ 1.537466] ata3: EH complete [ 1.546501] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.546511] ata3.00: irq_stat 0x40000001 [ 1.546517] ata3.00: failed command: READ DMA [ 1.546520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.546536] ata3.00: status: { DRDY ERR } [ 1.546541] ata3.00: error: { ABRT } [ 1.547439] ata3.00: configured for UDMA/100 [ 1.547460] ata3: EH complete [ 1.556498] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.556508] ata3.00: irq_stat 0x40000001 [ 1.556514] ata3.00: failed command: READ DMA [ 1.556517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.556533] ata3.00: status: { DRDY ERR } [ 1.556538] ata3.00: error: { ABRT } [ 1.557437] ata3.00: configured for UDMA/100 [ 1.557460] sd 2:0:0:0: [sdc] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.557468] sd 2:0:0:0: [sdc] tag#4 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#4 Add. Sense: Unaligned write command [ 1.557479] sd 2:0:0:0: [sdc] tag#4 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.557482] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.557491] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.557503] ata3: EH complete [ 1.578529] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.578540] ata3.00: irq_stat 0x40000001 [ 1.578546] ata3.00: failed command: READ DMA [ 1.578549] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.578566] ata3.00: status: { DRDY ERR } [ 1.578570] ata3.00: error: { ABRT } [ 1.579462] ata3.00: configured for UDMA/100 [ 1.579483] ata3: EH complete [ 1.588500] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.588510] ata3.00: irq_stat 0x40000001 [ 1.588516] ata3.00: failed command: READ DMA [ 1.588520] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 6 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.588536] ata3.00: status: { DRDY ERR } [ 1.588540] ata3.00: error: { ABRT } [ 1.589441] ata3.00: configured for UDMA/100 [ 1.589463] ata3: EH complete [ 1.598498] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.598508] ata3.00: irq_stat 0x40000001 [ 1.598514] ata3.00: failed command: READ DMA [ 1.598518] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.598534] ata3.00: status: { DRDY ERR } [ 1.598539] ata3.00: error: { ABRT } [ 1.599443] ata3.00: configured for UDMA/100 [ 1.599464] ata3: EH complete [ 1.608496] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.608507] ata3.00: irq_stat 0x40000001 [ 1.608513] ata3.00: failed command: READ DMA [ 1.608517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 8 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.608534] ata3.00: status: { DRDY ERR } [ 1.608538] ata3.00: error: { ABRT } [ 1.609440] ata3.00: configured for UDMA/100 [ 1.609461] ata3: EH complete [ 1.618497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.618507] ata3.00: irq_stat 0x40000001 [ 1.618514] ata3.00: failed command: READ DMA [ 1.618518] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 9 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.618534] ata3.00: status: { DRDY ERR } [ 1.618538] ata3.00: error: { ABRT } [ 1.619369] ata3.00: configured for UDMA/100 [ 1.619390] ata3: EH complete [ 1.628497] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1.628507] ata3.00: irq_stat 0x40000001 [ 1.628514] ata3.00: failed command: READ DMA [ 1.628517] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 1.628534] ata3.00: status: { DRDY ERR } [ 1.628538] ata3.00: error: { ABRT } [ 1.629437] ata3.00: configured for UDMA/100 [ 1.629460] sd 2:0:0:0: [sdc] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 1.629468] sd 2:0:0:0: [sdc] tag#10 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#10 Add. Sense: Unaligned write command [ 1.629479] sd 2:0:0:0: [sdc] tag#10 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [ 1.629482] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 1.629491] Buffer I/O error on dev sdc, logical block 0, async page read [ 1.629503] ata3: EH complete [ 1.629548] sdc: unable to read partition table [ 1.629595] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.632778] Freeing unused decrypted memory: 2036K [ 1.634078] Freeing unused kernel image (initmem) memory: 3032K [ 1.635522] Write protecting the kernel read-only data: 32768k [ 1.636993] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.637808] Freeing unused kernel image (rodata/data gap) memory: 1880K [ 1.648036] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.648039] rodata_test: all tests were successful [ 1.648068] Run /init as init process [ 1.648069] with arguments: [ 1.648069] /init [ 1.648070] rhgb [ 1.648070] with environment: [ 1.648071] HOME=/ [ 1.648071] TERM=linux [ 1.648071] BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.1.15-200.fc37.x86_64 [ 1.823494] usb 1-4.3: new high-speed USB device number 4 using xhci_hcd [ 1.963150] usb 1-4.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.64 [ 1.963163] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.963169] usb 1-4.3: Product: USB2.0 Hub [ 1.963173] usb 1-4.3: Manufacturer: VIA Labs, Inc. [ 1.964497] hub 1-4.3:1.0: USB hub found [ 1.964865] hub 1-4.3:1.0: 4 ports detected [ 2.065777] fuse: init (API version 7.37) [ 2.613456] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.613459] ata3.00: irq_stat 0x40000001 [ 2.613475] ata3.00: failed command: READ DMA EXT [ 2.613475] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 7 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.613479] ata3.00: status: { DRDY ERR } [ 2.613479] ata3.00: error: { ABRT } [ 2.613957] ata3.00: configured for UDMA/100 [ 2.613963] sd 2:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 2.613965] sd 2:0:0:0: [sdc] tag#7 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#7 Add. Sense: Unaligned write command [ 2.613968] sd 2:0:0:0: [sdc] tag#7 CDB: Read(10) 28 00 df 8f e2 00 00 00 08 00 [ 2.613968] I/O error, dev sdc, sector 3750748672 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 2.613975] ata3: EH complete [ 2.639089] e1000e: Intel(R) PRO/1000 Network Driver [ 2.639091] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.639394] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.644489] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.644492] ata3.00: irq_stat 0x40000001 [ 2.644493] ata3.00: failed command: READ DMA EXT [ 2.644494] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 26 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.644497] ata3.00: status: { DRDY ERR } [ 2.644498] ata3.00: error: { ABRT } [ 2.644974] ata3.00: configured for UDMA/100 [ 2.644979] ata3: EH complete [ 2.654161] BTRFS: device label ... devid 1 transid 52 /dev/sdb3 scanned by (udev-worker) (393) [ 2.661455] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.661457] ata3.00: irq_stat 0x40000001 [ 2.661458] ata3.00: failed command: READ DMA EXT [ 2.661459] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 3 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.661462] ata3.00: status: { DRDY ERR } [ 2.661463] ata3.00: error: { ABRT } [ 2.661954] ata3.00: configured for UDMA/100 [ 2.661957] ata3: EH complete [ 2.686448] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.686450] ata3.00: irq_stat 0x40000001 [ 2.686452] ata3.00: failed command: READ DMA EXT [ 2.686453] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 21 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.686456] ata3.00: status: { DRDY ERR } [ 2.686457] ata3.00: error: { ABRT } [ 2.686991] ata3.00: configured for UDMA/100 [ 2.686994] ata3: EH complete [ 2.707472] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.707475] ata3.00: irq_stat 0x40000001 [ 2.707477] ata3.00: failed command: READ DMA EXT [ 2.707477] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 22 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.707480] ata3.00: status: { DRDY ERR } [ 2.707481] ata3.00: error: { ABRT } [ 2.708115] ata3.00: configured for UDMA/100 [ 2.708120] ata3: EH complete [ 2.731466] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.731469] ata3.00: irq_stat 0x40000001 [ 2.731471] ata3.00: failed command: READ DMA EXT [ 2.731472] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 23 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.731488] ata3.00: status: { DRDY ERR } [ 2.731489] ata3.00: error: { ABRT } [ 2.732043] ata3.00: configured for UDMA/100 [ 2.732048] ata3: EH complete [ 2.755467] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2.755470] ata3.00: irq_stat 0x40000001 [ 2.755472] ata3.00: failed command: READ DMA EXT [ 2.755472] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 31 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 2.755476] ata3.00: status: { DRDY ERR } [ 2.755476] ata3.00: error: { ABRT } [ 2.756131] ata3.00: configured for UDMA/100 [ 2.756137] sd 2:0:0:0: [sdc] tag#31 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 2.756139] sd 2:0:0:0: [sdc] tag#31 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#31 Add. Sense: Unaligned write command [ 2.756141] sd 2:0:0:0: [sdc] tag#31 CDB: Read(10) 28 00 df 8f e2 00 00 00 08 00 [ 2.756142] I/O error, dev sdc, sector 3750748672 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 2.756144] Buffer I/O error on dev sdc, logical block 468843584, async page read [ 2.756149] ata3: EH complete [ 2.870969] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.882957] usb 2-6.1: new SuperSpeed USB device number 3 using xhci_hcd [ 2.899837] usb 2-6.1: New USB device found, idVendor=05e3, idProduct=0749, bcdDevice=15.39 [ 2.899840] usb 2-6.1: New USB device strings: Mfr=3, Product=4, SerialNumber=... [ 2.899841] usb 2-6.1: Product: USB3.0 Card Reader [ 2.899842] usb 2-6.1: Manufacturer: Generic [ 2.899842] usb 2-6.1: SerialNumber: ... [ 2.922389] usb-storage 2-6.1:1.0: USB Mass Storage device detected [ 2.922466] scsi host6: usb-storage 2-6.1:1.0 [ 2.922508] usbcore: registered new interface driver usb-storage [ 2.924305] usbcore: registered new interface driver uas [ 2.934629] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) B5C63F39F2A3227DC77F7584C7164FEB [ 2.934631] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.934737] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 2.935379] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 3.023475] usb 1-4.3.4: new high-speed USB device number 6 using xhci_hcd [ 3.163386] usb 1-4.3.4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.23 [ 3.163399] usb 1-4.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.163405] usb 1-4.3.4: Product: USB2.0 Hub [ 3.163409] usb 1-4.3.4: Manufacturer: VIA Labs, Inc. [ 3.164757] hub 1-4.3.4:1.0: USB hub found [ 3.165001] hub 1-4.3.4:1.0: 4 ports detected [ 3.366442] BTRFS info (device sdb3): using crc32c (crc32c-intel) checksum algorithm [ 3.366464] BTRFS info (device sdb3): using free space tree [ 3.374610] BTRFS info (device sdb3): enabling ssd optimizations [ 3.871508] usb 1-XXX.XXX.XXX.XXX: new full-speed USB device number 7 using xhci_hcd [ 3.962691] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1539 PQ: 0 ANSI: 6 [ 3.964160] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1539 PQ: 0 ANSI: 6 [ 3.964385] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.964545] sd 6:0:0:1: Attached scsi generic sg6 type 0 [ 3.965552] sd 6:0:0:0: [sdf] Media removed, stopped polling [ 3.965806] sd 6:0:0:0: [sdf] Attached SCSI removable disk [ 4.012880] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=1532, idProduct=0241, bcdDevice= 2.00 [ 4.012893] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.012899] usb 1-XXX.XXX.XXX.XXX: Product: Razer BlackWidow [ 4.012903] usb 1-XXX.XXX.XXX.XXX: Manufacturer: Razer [ 4.022563] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:1532:0241.0001/input/input3 [ 4.074691] hid-generic 0003:1532:0241.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input0 [ 4.076236] input: Razer Razer BlackWidow Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:1532:0241.0002/input/input4 [ 4.091500] SELinux: Class user_namespace not defined in policy. [ 4.091502] SELinux: the above unknown classes and permissions will be allowed [ 4.094473] SELinux: policy capability network_peer_controls=1 [ 4.094475] SELinux: policy capability open_perms=1 [ 4.094476] SELinux: policy capability extended_socket_class=1 [ 4.094476] SELinux: policy capability always_check_network=0 [ 4.094477] SELinux: policy capability cgroup_seclabel=1 [ 4.094478] SELinux: policy capability nnp_nosuid_transition=1 [ 4.094478] SELinux: policy capability genfs_seclabel_symlinks=1 [ 4.094479] SELinux: policy capability ioctl_skip_cloexec=0 [ 4.127609] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:1532:0241.0002/input/input5 [ 4.127657] hid-generic 0003:1532:0241.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input1 [ 4.128364] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.2/0003:1532:0241.0003/input/input6 [ 4.128448] hid-generic 0003:1532:0241.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2 [ 4.168460] sd 6:0:0:1: [sdg] Media removed, stopped polling [ 4.168679] sd 6:0:0:1: [sdg] Attached SCSI removable disk [ 4.254431] usb 1-XXX.XXX.XXX.XXX: new high-speed USB device number 8 using xhci_hcd [ 4.612900] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=081a, bcdDevice= 0.10 [ 4.612913] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.612919] usb 1-XXX.XXX.XXX.XXX: SerialNumber: ... [ 4.708382] zram: Added device: zram0 [ 4.741457] usb 1-XXX.XXX.XXX.XXX: new full-speed USB device number 9 using xhci_hcd [ 4.874228] loop: module loaded [ 4.883715] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11 [ 4.883719] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.883720] usb 1-XXX.XXX.XXX.XXX: Product: USB Receiver [ 4.883721] usb 1-XXX.XXX.XXX.XXX: Manufacturer: Logitech [ 4.893713] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:046D:C52B.0004/input/input7 [ 4.912372] BTRFS info (device sdb3: state M): use zstd compression, level 1 [ 4.915448] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 4.915453] ata3.00: irq_stat 0x40000001 [ 4.915456] ata3.00: failed command: READ DMA [ 4.915457] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 2 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 4.915464] ata3.00: status: { DRDY ERR } [ 4.915466] ata3.00: error: { ABRT } [ 4.916127] ata3.00: configured for UDMA/100 [ 4.916135] ata3: EH complete [ 4.945621] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input0 [ 4.947723] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0005/input/input8 [ 4.947808] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0005/input/input9 [ 4.954546] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 4.954548] ata3.00: irq_stat 0x40000001 [ 4.954550] ata3.00: failed command: READ DMA [ 4.954551] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 18 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 4.954554] ata3.00: status: { DRDY ERR } [ 4.954555] ata3.00: error: { ABRT } [ 4.955334] ata3.00: configured for UDMA/100 [ 4.955340] ata3: EH complete [ 4.978489] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 4.978491] ata3.00: irq_stat 0x40000001 [ 4.978493] ata3.00: failed command: READ DMA [ 4.978493] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 19 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 4.978496] ata3.00: status: { DRDY ERR } [ 4.978497] ata3.00: error: { ABRT } [ 4.979291] ata3.00: configured for UDMA/100 [ 4.979296] ata3: EH complete [ 4.999548] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0005/input/input10 [ 4.999611] hid-generic 0003:046D:C52B.0005: input,hiddev96,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input1 [ 5.001095] hid-generic 0003:046D:C52B.0006: hiddev97,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2 [ 5.001502] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.001504] ata3.00: irq_stat 0x40000001 [ 5.001506] ata3.00: failed command: READ DMA [ 5.001506] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 20 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 5.001510] ata3.00: status: { DRDY ERR } [ 5.001523] ata3.00: error: { ABRT } [ 5.002142] ata3.00: configured for UDMA/100 [ 5.002148] ata3: EH complete [ 5.019457] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.019460] ata3.00: irq_stat 0x40000001 [ 5.019461] ata3.00: failed command: READ DMA [ 5.019462] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 2 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 5.019465] ata3.00: status: { DRDY ERR } [ 5.019466] ata3.00: error: { ABRT } [ 5.020073] ata3.00: configured for UDMA/100 [ 5.020079] ata3: EH complete [ 5.045453] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.045456] ata3.00: irq_stat 0x40000001 [ 5.045458] ata3.00: failed command: READ DMA [ 5.045458] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 3 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 5.045461] ata3.00: status: { DRDY ERR } [ 5.045476] ata3.00: error: { ABRT } [ 5.045941] ata3.00: configured for UDMA/100 [ 5.045946] sd 2:0:0:0: [sdc] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 5.045948] sd 2:0:0:0: [sdc] tag#3 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#3 Add. Sense: Unaligned write command [ 5.045951] sd 2:0:0:0: [sdc] tag#3 CDB: Read(10) 28 00 00 00 00 00 00 01 00 00 [ 5.045956] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 2 [ 5.045967] ata3: EH complete [ 5.166246] zram0: detected capacity change from 0 to 16777216 [ 5.201549] EDAC ie31200: No ECC support [ 5.201709] EDAC ie31200: No ECC support [ 5.207458] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.207461] ata3.00: irq_stat 0x40000001 [ 5.207463] ata3.00: failed command: READ DMA EXT [ 5.207463] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 12 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.207467] ata3.00: status: { DRDY ERR } [ 5.207468] ata3.00: error: { ABRT } [ 5.208907] ata3.00: configured for UDMA/100 [ 5.208917] ata3: EH complete [ 5.238929] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.243002] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 5.252450] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.252453] ata3.00: irq_stat 0x40000001 [ 5.252455] ata3.00: failed command: READ DMA EXT [ 5.252455] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 16 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.252459] ata3.00: status: { DRDY ERR } [ 5.252460] ata3.00: error: { ABRT } [ 5.252937] ata3.00: configured for UDMA/100 [ 5.252944] ata3: EH complete [ 5.272444] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.272447] ata3.00: irq_stat 0x40000001 [ 5.272449] ata3.00: failed command: READ DMA EXT [ 5.272449] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 10 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.272453] ata3.00: status: { DRDY ERR } [ 5.272454] ata3.00: error: { ABRT } [ 5.272934] ata3.00: configured for UDMA/100 [ 5.272941] ata3: EH complete [ 5.294211] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 5.294386] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 5.294440] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.294442] ata3.00: irq_stat 0x40000001 [ 5.294444] ata3.00: failed command: READ DMA EXT [ 5.294445] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 11 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.294448] ata3.00: status: { DRDY ERR } [ 5.294449] ata3.00: error: { ABRT } [ 5.294947] ata3.00: configured for UDMA/100 [ 5.294953] ata3: EH complete [ 5.297324] i2c i2c-0: 2/4 memory slots populated (from DMI) [ 5.298131] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 5.298933] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 5.312443] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.312446] ata3.00: irq_stat 0x40000001 [ 5.312448] ata3.00: failed command: READ DMA EXT [ 5.312448] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 23 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.312452] ata3.00: status: { DRDY ERR } [ 5.312452] ata3.00: error: { ABRT } [ 5.312927] ata3.00: configured for UDMA/100 [ 5.312933] ata3: EH complete [ 5.329096] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 5.329098] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.329099] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.329099] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.329100] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.330450] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.330452] ata3.00: irq_stat 0x40000001 [ 5.330455] ata3.00: failed command: READ DMA EXT [ 5.330455] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 24 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.330459] ata3.00: status: { DRDY ERR } [ 5.330459] ata3.00: error: { ABRT } [ 5.331053] ata3.00: configured for UDMA/100 [ 5.331059] ata3: EH complete [ 5.340320] logitech-djreceiver 0003:046D:C52B.0006: hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2 [ 5.347437] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 5.347439] ata3.00: irq_stat 0x40000001 [ 5.347441] ata3.00: failed command: READ DMA EXT [ 5.347442] ata3.00: cmd 25/00:08:00:e2:8f/00:00:df:00:00/e0 tag 25 dma 4096 in res 51/04:08:00:e2:8f/00:00:df:00:00/e0 Emask 0x1 (device error) [ 5.347445] ata3.00: status: { DRDY ERR } [ 5.347446] ata3.00: error: { ABRT } [ 5.347920] ata3.00: configured for UDMA/100 [ 5.347925] Buffer I/O error on dev sdc, logical block 468843584, async page read [ 5.347929] ata3: EH complete [ 5.418567] iTCO_vendor_support: vendor-support=0 [ 5.422501] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 5.422511] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 5.422525] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 5.423912] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.449888] input: Logitech Wireless Device PID:4096 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.2/0003:046D:C52B.0006/0003:046D:4096.0007/input/input13 [ 5.450167] hid-generic 0003:046D:4096.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Device PID:4096] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2:1 [ 5.450189] intel_tcc_cooling: Programmable TCC Offset detected [ 5.468570] intel_rapl_common: Found RAPL domain package [ 5.468573] intel_rapl_common: Found RAPL domain core [ 5.468574] intel_rapl_common: Found RAPL domain uncore [ 5.468575] intel_rapl_common: Found RAPL domain dram [ 5.662839] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Quota mode: none. [ 6.017386] mc: Linux media interface: v0.10 [ 6.034539] videodev: Linux video capture interface: v2.00 [ 6.095552] logitech-hidpp-device 0003:046D:4096.0007: HID++ 4.5 device connected. [ 6.101508] usb 1-XXX.XXX.XXX.XXX: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [ 6.101517] usb 1-XXX.XXX.XXX.XXX: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 [ 6.102079] usbcore: registered new interface driver snd-usb-audio [ 6.102193] usb 1-XXX.XXX.XXX.XXX: Found UVC 1.00 device <unnamed> (046d:081a) [ 6.140966] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/input/input17 [ 6.141126] usbcore: registered new interface driver uvcvideo [ 6.188417] RPC: Registered named UNIX socket transport module. [ 6.188423] RPC: Registered udp transport module. [ 6.188424] RPC: Registered tcp transport module. [ 6.188424] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.381571] input: Logitech ERGO M575 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.2/0003:046D:C52B.0006/0003:046D:4096.0007/input/input18 [ 6.384153] logitech-hidpp-device 0003:046D:4096.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech ERGO M575] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2:1 [ 6.459003] NET: Registered PF_QIPCRTR protocol family [ 9.906306] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.906476] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 12.277087] rfkill: input handler disabled [ 12.908662] usb 1-XXX.XXX.XXX.XXX: reset high-speed USB device number 8 using xhci_hcd [ 16.628491] rfkill: input handler enabled [ 17.752890] rfkill: input handler disabled [ 67.100446] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component [ 67.181402] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 67.181406] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 67.181408] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 67.181410] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 67.181411] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 67.181412] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 67.181413] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 67.181414] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 67.211452] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec [ 67.211705] hdaudio hdaudioC0D2: Unable to configure, disabling [ 67.212070] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 67.212140] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 67.212168] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 67.212194] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 67.212219] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 67.212243] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 67.212272] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 67.212298] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 217.419401] rfkill: input handler enabled [ 219.950393] EXT4-fs (sdb2): unmounting filesystem. [ 220.046888] zram0: detected capacity change from 16777216 to 0 [ 220.099745] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.099749] ata3.00: irq_stat 0x40000001 [ 220.099752] ata3.00: failed command: READ DMA [ 220.099753] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 14 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.099760] ata3.00: status: { DRDY ERR } [ 220.099761] ata3.00: error: { ABRT } [ 220.100658] ata3.00: configured for UDMA/100 [ 220.100668] ata3: EH complete [ 220.116751] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.116758] ata3.00: irq_stat 0x40000001 [ 220.116762] ata3.00: failed command: READ DMA [ 220.116764] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 9 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.116774] ata3.00: status: { DRDY ERR } [ 220.116777] ata3.00: error: { ABRT } [ 220.117873] ata3.00: configured for UDMA/100 [ 220.117890] ata3: EH complete [ 220.133753] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.133764] ata3.00: irq_stat 0x40000001 [ 220.133773] ata3.00: failed command: READ DMA [ 220.133776] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 28 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.133793] ata3.00: status: { DRDY ERR } [ 220.133797] ata3.00: error: { ABRT } [ 220.134824] ata3.00: configured for UDMA/100 [ 220.134850] ata3: EH complete [ 220.150745] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.150756] ata3.00: irq_stat 0x40000001 [ 220.150766] ata3.00: failed command: READ DMA [ 220.150769] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 29 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.150786] ata3.00: status: { DRDY ERR } [ 220.150791] ata3.00: error: { ABRT } [ 220.151765] ata3.00: configured for UDMA/100 [ 220.151790] ata3: EH complete [ 220.167745] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.167756] ata3.00: irq_stat 0x40000001 [ 220.167765] ata3.00: failed command: READ DMA [ 220.167769] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 30 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.167785] ata3.00: status: { DRDY ERR } [ 220.167789] ata3.00: error: { ABRT } [ 220.168812] ata3.00: configured for UDMA/100 [ 220.168837] ata3: EH complete [ 220.184749] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 220.184761] ata3.00: irq_stat 0x40000001 [ 220.184767] ata3.00: failed command: READ DMA [ 220.184770] ata3.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 0 dma 131072 in res 51/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 220.184787] ata3.00: status: { DRDY ERR } [ 220.184791] ata3.00: error: { ABRT } [ 220.185693] ata3.00: configured for UDMA/100 [ 220.185714] scsi_io_completion_action: 2 callbacks suppressed [ 220.185724] sd 2:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 220.185733] sd 2:0:0:0: [sdc] tag#0 Sense Key : Illegal Request [current] sd 2:0:0:0: [sdc] tag#0 Add. Sense: Unaligned write command [ 220.185745] sd 2:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 01 00 00 [ 220.185748] blk_print_req_error: 2 callbacks suppressed [ 220.185751] I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 32 prio class 2 [ 220.185778] ata3: EH complete [ 220.311117] watchdog: watchdog0: watchdog did not stop!