[ 0.000000] Linux version 6.5.1-1-cachyos (XXX@XXX) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.40.90) #1 SMP PREEMPT_DYNAMIC Sat, 02 Sep 2023 20:53:32 +0000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b609efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b609f000-0x00000000b60a5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b60a6000-0x00000000b6bd0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b6bd1000-0x00000000b7146fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7147000-0x00000000d6038fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6039000-0x00000000d60d0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d60d1000-0x00000000d60e0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d60e1000-0x00000000d61d3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d61d4000-0x00000000d6ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb488c018-0xb489c057] usable ==> usable [ 0.000000] e820: update [mem 0xb488c018-0xb489c057] usable ==> usable [ 0.000000] e820: update [mem 0xb487b018-0xb488b457] usable ==> usable [ 0.000000] e820: update [mem 0xb487b018-0xb488b457] usable ==> usable [ 0.000000] e820: update [mem 0xb486a018-0xb487a457] usable ==> usable [ 0.000000] e820: update [mem 0xb486a018-0xb487a457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b486a017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b486a018-0x00000000b487a457] usable [ 0.000000] reserve setup_data: [mem 0x00000000b487a458-0x00000000b487b017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b487b018-0x00000000b488b457] usable [ 0.000000] reserve setup_data: [mem 0x00000000b488b458-0x00000000b488c017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b488c018-0x00000000b489c057] usable [ 0.000000] reserve setup_data: [mem 0x00000000b489c058-0x00000000b609efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b609f000-0x00000000b60a5fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b60a6000-0x00000000b6bd0fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b6bd1000-0x00000000b7146fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b7147000-0x00000000d6038fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d6039000-0x00000000d60d0fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d60d1000-0x00000000d60e0fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000d60e1000-0x00000000d61d3fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000d61d4000-0x00000000d6ffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d7800000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] efi: EFI v2.3.1 by American Megatrends [ 0.000000] efi: ACPI=0xd61a2000 ACPI 2.0=0xd61a2000 SMBIOS=0xf04c0 RNG=0xd60e0f98 INITRD=0xb7194898 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem164: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem165: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem166: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map [ 0.000000] efi: Not removing mem167: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.000000] efi: Not removing mem168: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem169: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87X-UD5H/Z87X-UD5H-CF, BIOS 10e 11/14/2017 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.874 MHz processor [ 0.000650] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000652] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000662] last_pfn = 0x21f600 max_arch_pfn = 0x400000000 [ 0.000669] total RAM covered: 8046M [ 0.000830] Found optimal setting for mtrr clean up [ 0.000831] gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G [ 0.000835] MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs [ 0.000837] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001104] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved [ 0.001107] last_pfn = 0xd7000 max_arch_pfn = 0x400000000 [ 0.007655] found SMP MP-table at [mem 0x000fd720-0x000fd72f] Using GB pages for direct mapping [ 0.008107] Secure boot disabled [ 0.008107] RAMDISK: [mem 0xadd94000-0xaf579fff] ACPI: Early table checksum verification disabled [ 0.008112] ACPI: RSDP 0x00000000D61A2000 000024 (v02 ALASKA) [ 0.008116] ACPI: XSDT 0x00000000D61A2078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008121] ACPI: FACP 0x00000000D61AFA18 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.008125] ACPI: DSDT 0x00000000D61A2188 00D889 (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.008128] ACPI: FACS 0x00000000D61D2080 000040 [ 0.008131] ACPI: APIC 0x00000000D61AFB28 000062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.008133] ACPI: FPDT 0x00000000D61AFB90 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008136] ACPI: SSDT 0x00000000D61AFBD8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.008139] ACPI: SSDT 0x00000000D61B0118 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.008141] ACPI: MCFG 0x00000000D61B0BF0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.008143] ACPI: HPET 0x00000000D61B0C30 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.008146] ACPI: SSDT 0x00000000D61B0C68 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.008148] ACPI: SSDT 0x00000000D61B0FD8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.008151] ACPI: MATS 0x00000000D61B44C0 000034 (v02 ALASKA A M I 00000002 w x2 00000000) [ 0.008153] ACPI: Reserving FACP table memory at [mem 0xd61afa18-0xd61afb23] ACPI: Reserving DSDT table memory at [mem 0xd61a2188-0xd61afa10] ACPI: Reserving FACS table memory at [mem 0xd61d2080-0xd61d20bf] ACPI: Reserving APIC table memory at [mem 0xd61afb28-0xd61afb89] ACPI: Reserving FPDT table memory at [mem 0xd61afb90-0xd61afbd3] ACPI: Reserving SSDT table memory at [mem 0xd61afbd8-0xd61b0110] ACPI: Reserving SSDT table memory at [mem 0xd61b0118-0xd61b0bef] ACPI: Reserving MCFG table memory at [mem 0xd61b0bf0-0xd61b0c2b] ACPI: Reserving HPET table memory at [mem 0xd61b0c30-0xd61b0c67] ACPI: Reserving SSDT table memory at [mem 0xd61b0c68-0xd61b0fd4] ACPI: Reserving SSDT table memory at [mem 0xd61b0fd8-0xd61b44b8] ACPI: Reserving MATS table memory at [mem 0xd61b44c0-0xd61b44f3] No NUMA configuration found [ 0.008209] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff] NODE_DATA(0) allocated [mem 0x21f5fb000-0x21f5fffff] Zone ranges: [ 0.008235] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021f5fffff] Device empty [ 0.008241] Movable zone start for each node [ 0.008241] Early memory node ranges [ 0.008241] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000b609efff] node 0: [mem 0x00000000b60a6000-0x00000000b6bd0fff] node 0: [mem 0x00000000b7147000-0x00000000d6038fff] node 0: [mem 0x00000000d6fff000-0x00000000d6ffffff] node 0: [mem 0x0000000100000000-0x000000021f5fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008254] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008279] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.013267] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.014132] On node 0, zone DMA32: 1398 pages in unavailable ranges [ 0.014167] On node 0, zone DMA32: 4038 pages in unavailable ranges [ 0.022107] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.022133] On node 0, zone Normal: 2560 pages in unavailable ranges [ 0.022139] Reserving Intel graphics memory at [mem 0xd7a00000-0xdf9fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.022219] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.022228] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.022231] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.022232] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.022236] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.022237] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.022242] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.022243] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.022261] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xb486a000-0xb486afff] PM: hibernation: Registered nosave memory: [mem 0xb487a000-0xb487afff] PM: hibernation: Registered nosave memory: [mem 0xb487b000-0xb487bfff] PM: hibernation: Registered nosave memory: [mem 0xb488b000-0xb488bfff] PM: hibernation: Registered nosave memory: [mem 0xb488c000-0xb488cfff] PM: hibernation: Registered nosave memory: [mem 0xb489c000-0xb489cfff] PM: hibernation: Registered nosave memory: [mem 0xb609f000-0xb60a5fff] PM: hibernation: Registered nosave memory: [mem 0xb6bd1000-0xb7146fff] PM: hibernation: Registered nosave memory: [mem 0xd6039000-0xd60d0fff] PM: hibernation: Registered nosave memory: [mem 0xd60d1000-0xd60e0fff] PM: hibernation: Registered nosave memory: [mem 0xd60e1000-0xd61d3fff] PM: hibernation: Registered nosave memory: [mem 0xd61d4000-0xd6ffefff] PM: hibernation: Registered nosave memory: [mem 0xd7000000-0xd77fffff] PM: hibernation: Registered nosave memory: [mem 0xd7800000-0xdf9fffff] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0xdfa00000-0xfebfffff] available for PCI devices [ 0.022289] Booting paravirtualized kernel on bare hardware [ 0.022291] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns [ 0.027460] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.027743] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u1048576 [ 0.027749] pcpu-alloc: s225280 r8192 d28672 u1048576 alloc=1*2097152 [ 0.027751] pcpu-alloc: [0] 0 1 [ 0.027861] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.028719] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.029168] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.029201] Fallback order for Node 0: 0 [ 0.029205] Built 1 zonelists, mobility grouping on. Total pages: 2019962 [ 0.029206] Policy zone: Normal [ 0.029434] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.029439] software IO TLB: area num 2. [ 0.062288] Memory: 7705988K/8208744K available (18432K kernel code, 2138K rwdata, 12752K rodata, 3572K init, 3584K bss, 502496K reserved, 0K cma-reserved) [ 0.062490] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.062501] Kernel/User page tables isolation: enabled [ 0.062530] ftrace: allocating 45993 entries in 180 pages [ 0.069448] ftrace: allocated 180 pages with 4 groups [ 0.069497] BORE (Burst-Oriented Response Enhancer) CPU Scheduler modification 3.1.3 by Masahito Suzuki [ 0.069514] Dynamic Preempt: full [ 0.069534] rcu: Preemptible hierarchical RCU implementation. [ 0.069534] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2. [ 0.069535] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.069536] Trampoline variant of Tasks RCU enabled. [ 0.069537] Rude variant of Tasks RCU enabled. [ 0.069537] Tracing variant of Tasks RCU enabled. [ 0.069538] rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies. [ 0.069538] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.071922] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16 [ 0.072104] rcu: Offload RCU callbacks from CPUs: 0-1. [ 0.072106] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.072204] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.072230] Console: colour dummy device 80x25 [ 0.072232] printk: console [tty0] enabled [ 0.072273] ACPI: Core revision 20230331 [ 0.072367] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.072378] APIC: Switch to symmetric I/O mode setup [ 0.072697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.082378] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e05fec5ed1, max_idle_ns: 440795356672 ns [ 0.082382] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.74 BogoMIPS (lpj=6385748) [ 0.082403] CPU0: Thermal monitoring enabled (TM1) [ 0.082420] process: using mwait in idle threads [ 0.082423] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.082424] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.082427] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.082429] Spectre V2 : Mitigation: Retpolines [ 0.082430] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.082430] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.082431] Speculative Store Bypass: Vulnerable [ 0.082434] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.082434] MMIO Stale Data: Unknown: No mitigations [ 0.082435] SRBDS: Vulnerable: No microcode [ 0.082439] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.082440] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.082441] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.098071] Freeing SMP alternatives memory: 48K [ 0.098075] pid_max: default: 32768 minimum: 301 [ 0.102591] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity [ 0.102615] landlock: Up and running. [ 0.102616] Yama: becoming mindful. [ 0.102621] LSM support for eBPF active [ 0.102649] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.102658] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.209885] smpboot: CPU0: Intel(R) Pentium(R) CPU G3258 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.210011] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.210027] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.210036] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.210047] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.210084] ... version: 3 [ 0.210085] ... bit width: 48 [ 0.210086] ... generic registers: 8 [ 0.210086] ... value mask: 0000ffffffffffff [ 0.210087] ... max period: 00007fffffffffff [ 0.210088] ... fixed-purpose events: 3 [ 0.210089] ... event mask: 00000007000000ff [ 0.210192] signal: max sigframe size: 1520 [ 0.210207] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.210229] rcu: Hierarchical SRCU implementation. [ 0.210230] rcu: Max phase no-delay instances is 800. [ 0.210380] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.210380] smp: Bringing up secondary CPUs ... [ 0.210380] smpboot: x86: Booting SMP configuration: [ 0.210380] .... node #0, CPUs: #1 [ 0.210380] smp: Brought up 1 node, 2 CPUs [ 0.210380] smpboot: Max logical packages: 1 [ 0.210380] smpboot: Total of 2 processors activated (12771.49 BogoMIPS) [ 0.210380] devtmpfs: initialized [ 0.210380] x86/mm: Memory block size: 128MB [ 0.210875] ACPI: PM: Registering ACPI NVS region [mem 0xb609f000-0xb60a5fff] (28672 bytes) [ 0.210877] ACPI: PM: Registering ACPI NVS region [mem 0xd60e1000-0xd61d3fff] (995328 bytes) [ 0.210918] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns [ 0.210922] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.210956] pinctrl core: initialized pinctrl subsystem [ 0.211051] PM: RTC time: 12:12:57, date: 2023-09-04 [ 0.211473] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.211618] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.211676] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.211732] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.211860] thermal_sys: Registered thermal governor 'fair_share' [ 0.211862] thermal_sys: Registered thermal governor 'bang_bang' [ 0.211862] thermal_sys: Registered thermal governor 'step_wise' [ 0.211863] thermal_sys: Registered thermal governor 'user_space' [ 0.211864] thermal_sys: Registered thermal governor 'power_allocator' [ 0.211874] cpuidle: using governor ladder [ 0.211877] cpuidle: using governor menu [ 0.211935] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.211936] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.212001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.212005] PCI: not using MMCONFIG [ 0.212006] PCI: Using configuration type 1 for base access [ 0.212065] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.212154] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.214421] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.214421] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.214421] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.214421] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.214644] ACPI: Added _OSI(Module Device) [ 0.214644] ACPI: Added _OSI(Processor Device) [ 0.214644] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.214644] ACPI: Added _OSI(Processor Aggregator Device) [ 0.222201] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.223074] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.225010] ACPI: Dynamic OEM Table Load: [ 0.225015] ACPI: SSDT 0xFFFF8CD980350800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.225661] ACPI: Dynamic OEM Table Load: [ 0.225666] ACPI: SSDT 0xFFFF8CD98086D000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.226334] ACPI: Dynamic OEM Table Load: [ 0.226337] ACPI: SSDT 0xFFFF8CD980238200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.227196] ACPI: Interpreter enabled [ 0.227219] ACPI: PM: (supports S0 S3 S4 S5) [ 0.227220] ACPI: Using IOAPIC for interrupt routing [ 0.227731] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.228428] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.228436] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.228437] PCI: Using E820 reservations for host bridge windows [ 0.228708] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.237339] ACPI: \_TZ_.FN00: New power resource [ 0.237392] ACPI: \_TZ_.FN01: New power resource [ 0.237442] ACPI: \_TZ_.FN02: New power resource [ 0.237493] ACPI: \_TZ_.FN03: New power resource [ 0.237541] ACPI: \_TZ_.FN04: New power resource [ 0.238145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.238151] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.238893] PCI host bridge to bus 0000:00 [ 0.238894] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.238970] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000 [ 0.238978] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.239000] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.239078] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.239172] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.239300] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.239314] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3f000-0xf7d3f00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.239411] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.239422] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3d000-0xf7d3dfff] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.239541] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.239555] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.239689] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.239701] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.239819] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.239886] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.240158] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.240226] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.240488] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.240556] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.240817] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 0.240884] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.241141] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.241155] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.241297] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.241451] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.241461] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.241574] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.241587] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: working around ROM BAR overlap defect [ 0.241776] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 [ 0.241800] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf79fffff] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f] pci 0000:02:00.0: reg 0x1c: [mem 0xf7a00000-0xf7a03fff] pci 0000:02:00.0: reg 0x30: [mem 0xf7800000-0xf78fffff pref] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.242149] pci 0000:00:1c.3: PCI bridge to [bus 02] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf7afffff] pci 0000:03:00.0: [1b4b:9230] type 00 class 0x010601 [ 0.242238] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f] pci 0000:03:00.0: reg 0x24: [mem 0xf7c10000-0xf7c107ff] pci 0000:03:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1 [ 0.242342] pci 0000:03:00.0: PME# supported from D3hot [ 0.242440] pci 0000:00:1c.4: PCI bridge to [bus 03] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401 [ 0.242642] pci 0000:04:00.0: supports D1 D2 [ 0.242643] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242705] pci 0000:00:1c.6: PCI bridge to [bus 04-05] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff] pci_bus 0000:05: extended config space not accessible [ 0.242775] pci 0000:05:01.0: [1106:3044] type 00 class 0x0c0010 [ 0.242800] pci 0000:05:01.0: reg 0x10: [mem 0xf7b00000-0xf7b007ff] pci 0000:05:01.0: reg 0x14: [io 0xc000-0xc07f] pci 0000:05:01.0: supports D2 [ 0.242920] pci 0000:05:01.0: PME# supported from D2 D3hot D3cold [ 0.243026] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode) [ 0.243035] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] pci 0000:04:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.243049] pci 0000:04:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] (subtractive decode) [ 0.243776] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.243819] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.243820] ACPI: PCI: Interrupt link LNKB disabled [ 0.243859] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.243899] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.243937] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 0.243976] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.243977] ACPI: PCI: Interrupt link LNKF disabled [ 0.244015] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.244054] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.244435] iommu: Default domain type: Translated [ 0.244436] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.244567] SCSI subsystem initialized [ 0.244596] libata version 3.00 loaded. [ 0.244600] ACPI: bus type USB registered [ 0.244609] usbcore: registered new interface driver usbfs [ 0.244613] usbcore: registered new interface driver hub [ 0.244617] usbcore: registered new device driver usb [ 0.244633] pps_core: LinuxPPS API ver. 1 registered [ 0.244634] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.244636] PTP clock support registered [ 0.244644] EDAC MC: Ver: 3.0.0 [ 0.244739] efivars: Registered efivars operations [ 0.244739] NetLabel: Initializing [ 0.244739] NetLabel: domain hash size = 128 [ 0.244739] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.244739] NetLabel: unlabeled traffic allowed by default [ 0.244739] mctp: management component transport protocol core [ 0.244739] NET: Registered PF_MCTP protocol family [ 0.244739] PCI: Using ACPI for IRQ routing [ 0.245789] PCI: pci_cache_line_size set to 64 bytes [ 0.245832] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0xb486a018-0xb7ffffff] e820: reserve RAM buffer [mem 0xb487b018-0xb7ffffff] e820: reserve RAM buffer [mem 0xb488c018-0xb7ffffff] e820: reserve RAM buffer [mem 0xb609f000-0xb7ffffff] e820: reserve RAM buffer [mem 0xb6bd1000-0xb7ffffff] e820: reserve RAM buffer [mem 0xd6039000-0xd7ffffff] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.245875] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.245875] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.245875] vgaarb: loaded [ 0.245875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.245875] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.248414] clocksource: Switched to clocksource tsc-early [ 0.248526] VFS: Disk quotas dquot_6.6.0 [ 0.248534] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.248589] pnp: PnP ACPI init [ 0.248652] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.248807] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.248809] system 00:01: [io 0xffff] has been reserved [ 0.248810] system 00:01: [io 0xffff] has been reserved [ 0.248812] system 00:01: [io 0xffff] has been reserved [ 0.248813] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.248814] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.248815] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.248816] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.248817] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.248818] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.248875] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.248991] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.248992] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.248993] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.249211] pnp 00:05: [dma 0 disabled] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.249637] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.249639] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.249641] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.249642] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.249644] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.249645] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.249646] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.249648] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.249649] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.249650] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.249652] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.249653] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.249849] pnp: PnP ACPI: found 8 devices [ 0.255120] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.255181] NET: Registered PF_INET protocol family [ 0.255257] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.256820] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.256843] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.256873] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.257024] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.257249] TCP: Hash tables configured (established 65536 bind 65536) [ 0.257304] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.257331] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.257351] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.257392] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.257399] NET: Registered PF_XDP protocol family [ 0.257413] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.3: PCI bridge to [bus 02] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf7afffff] pci 0000:00:1c.4: PCI bridge to [bus 03] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:04:00.0: PCI bridge to [bus 05] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] pci 0000:04:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] pci 0000:00:1c.6: PCI bridge to [bus 04-05] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.6: bridge window [mem 0xf7b00000-0xf7bfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfeafffff window] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf7afffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff] pci_bus 0000:05: resource 4 [io 0xc000-0xcfff] pci_bus 0000:05: resource 5 [mem 0xf7b00000-0xf7bfffff] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x820 took 18122 usecs [ 0.294318] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x820 took 17555 usecs [ 0.294343] PCI: CLS 64 bytes, default 64 [ 0.294348] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.294348] software IO TLB: mapped [mem 0x00000000c28b5000-0x00000000c68b5000] (64MB) [ 0.294389] Trying to unpack rootfs image as initramfs... [ 0.296573] Initialise system trusted keyrings [ 0.296582] Key type blacklist registered [ 0.296626] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 0.296639] zbud: loaded [ 0.296748] integrity: Platform Keyring initialized [ 0.296751] integrity: Machine keyring initialized [ 0.304243] Key type asymmetric registered [ 0.304252] Asymmetric key parser 'x509' registered [ 0.304272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.304334] io scheduler mq-deadline registered [ 0.304336] io scheduler kyber registered [ 0.304348] io scheduler bfq registered [ 0.304348] BFQ I/O-scheduler: BFQ-CachyOS v6.5 (with cgroups support) [ 0.305000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.305026] efifb: probing for efifb [ 0.305038] efifb: No BGRT, not showing boot graphics [ 0.305039] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.305040] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.305041] efifb: scrolling: redraw [ 0.305042] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.305078] fbcon: Deferring console take-over [ 0.305079] fb0: EFI VGA frame buffer device [ 0.305087] intel_idle: max_cstate 1 reached [ 0.305209] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.306277] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.306335] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.306796] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.306982] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.306984] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.307130] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.307308] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.308998] Non-volatile memory driver v1.3 [ 0.309001] Linux agpgart interface v0.103 [ 0.309026] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.309173] ahci 0000:00:1f.2: version 3.0 [ 0.309312] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode [ 0.309315] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.320586] scsi host0: ahci [ 0.320667] scsi host1: ahci [ 0.320727] scsi host2: ahci [ 0.320794] scsi host3: ahci [ 0.320854] scsi host4: ahci [ 0.320916] scsi host5: ahci [ 0.320938] ata1: DUMMY [ 0.320940] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 28 [ 0.320941] ata3: DUMMY [ 0.320942] ata4: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a280 irq 28 [ 0.320943] ata5: DUMMY [ 0.320944] ata6: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a380 irq 28 [ 0.321084] ahci 0000:03:00.0: controller can do FBS, turning on CAP_FBS [ 0.331277] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.331283] ahci 0000:03:00.0: flags: 64bit ncq fbs pio [ 0.331802] scsi host6: ahci [ 0.331883] scsi host7: ahci [ 0.331943] scsi host8: ahci [ 0.332003] scsi host9: ahci [ 0.332066] scsi host10: ahci [ 0.332130] scsi host11: ahci [ 0.332189] scsi host12: ahci [ 0.332256] scsi host13: ahci [ 0.332280] ata7: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10100 irq 29 [ 0.332283] ata8: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10180 irq 29 [ 0.332284] ata9: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10200 irq 29 [ 0.332286] ata10: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10280 irq 29 [ 0.332288] ata11: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10300 irq 29 [ 0.332290] ata12: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10380 irq 29 [ 0.332291] ata13: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10400 irq 29 [ 0.332293] ata14: SATA max UDMA/133 abar m2048@0xf7c10000 port 0xf7c10480 irq 29 [ 0.332330] ACPI: bus type drm_connector registered [ 0.332730] usbcore: registered new interface driver usbserial_generic [ 0.332734] usbserial: USB Serial support registered for generic [ 0.332821] rtc_cmos 00:02: RTC can wake from S4 [ 0.333022] rtc_cmos 00:02: registered as rtc0 [ 0.333051] rtc_cmos 00:02: setting system clock to 2023-09-04T12:12:57 UTC (1693829577) [ 0.333070] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.333129] intel_pstate: Intel P-state driver initializing [ 0.333200] ledtrig-cpu: registered to indicate activity on CPUs [ 0.333372] hid: raw HID events driver (C) Jiri Kosina [ 0.333454] drop_monitor: Initializing network drop monitor service [ 0.345093] Initializing XFRM netlink socket [ 0.345121] NET: Registered PF_INET6 protocol family [ 0.345422] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.345428] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.345438] ehci-pci 0000:00:1a.0: debug port 2 [ 0.349345] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000 [ 0.358259] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.358304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.358306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.358308] usb usb1: Product: EHCI Host Controller [ 0.358309] usb usb1: Manufacturer: Linux 6.5.1-1-cachyos ehci_hcd [ 0.358310] usb usb1: SerialNumber: ... [ 0.358406] hub 1-0:1.0: USB hub found [ 0.358411] hub 1-0:1.0: 2 ports detected [ 0.358571] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.358575] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.358585] ehci-pci 0000:00:1d.0: debug port 2 [ 0.362499] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3b000 [ 0.372267] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.372316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.372318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.372319] usb usb2: Product: EHCI Host Controller [ 0.372320] usb usb2: Manufacturer: Linux 6.5.1-1-cachyos ehci_hcd [ 0.372321] usb usb2: SerialNumber: ... [ 0.372423] hub 2-0:1.0: USB hub found [ 0.372428] hub 2-0:1.0: 2 ports detected [ 0.403066] Freeing initrd memory: 24472K [ 0.407345] Segment Routing with IPv6 [ 0.407348] RPL Segment Routing with IPv6 [ 0.407358] In-situ OAM (IOAM) with IPv6 [ 0.407383] NET: Registered PF_PACKET protocol family [ 0.407556] microcode: Microcode Update Driver: v2.2. [ 0.407562] IPI shorthand broadcast: enabled [ 0.408532] sched_clock: Marking stable (408002788, 246050)->(421767173, -13518335) [ 0.408616] registered taskstats version 1 [ 0.408692] Loading compiled-in X.509 certificates [ 0.410975] Loaded X.509 cert 'Build time autogenerated kernel key: 870bc1d3f1d07ffce2b77c705d6f0b1738a0c35a' [ 0.411243] zswap: loaded using pool zstd/zsmalloc [ 0.412587] Key type .fscrypt registered [ 0.412588] Key type fscrypt-provisioning registered [ 0.413431] PM: Magic number: 7:757:227 [ 0.413491] acpi PNP0200:00: hash matches [ 0.516275] RAS: Correctable Errors collector initialized. [ 0.516326] clk: Disabling unused clocks [ 0.600249] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.614249] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.642363] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.642376] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.642465] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.643036] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 0.643039] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.643565] ata6.00: ATA-8: ST1000VX005-2EZ102, SC23, max UDMA/133 [ 0.643710] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.644472] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 0.644475] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.644659] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100 [ 0.645131] ata6.00: configured for UDMA/133 [ 0.645519] ata2.00: configured for UDMA/100 [ 0.647143] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB00 PQ: 0 ANSI: 5 [ 0.656870] ata4.00: ATA-8: KINGSTON SHFS37A120G, 603ABBF0, max UDMA/133 [ 0.658441] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.658459] ata8: SATA link down (SStatus 0 SControl 300) [ 0.658478] ata10: SATA link down (SStatus 0 SControl 300) [ 0.658503] ata9: SATA link down (SStatus 0 SControl 300) [ 0.658514] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 0.658531] ata11: SATA link down (SStatus 0 SControl 300) [ 0.658551] ata7: SATA link down (SStatus 0 SControl 300) [ 0.658574] ata13: SATA link down (SStatus 0 SControl 300) [ 0.658595] ata12: SATA link down (SStatus 0 SControl 300) [ 0.658640] ata14.00: configured for UDMA/66 [ 0.692339] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.699161] ata4.00: configured for UDMA/133 [ 0.699203] scsi 3:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5 [ 0.699356] scsi 5:0:0:0: Direct-Access ATA ST1000VX005-2EZ1 SC23 PQ: 0 ANSI: 5 [ 0.699367] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 0.699374] sd 3:0:0:0: [sda] Write Protect is off [ 0.699375] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.699384] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.699395] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.699529] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.699531] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 0.699536] sd 5:0:0:0: [sdb] Write Protect is off [ 0.699537] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.699544] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.699555] sd 5:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 0.699746] scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 [ 0.700278] sda: sda1 sda2 [ 0.700339] sd 3:0:0:0: [sda] Attached SCSI disk [ 0.719918] sdb: sdb1 sdb2 sdb3 [ 0.719984] sd 5:0:0:0: [sdb] Attached SCSI disk [ 0.736603] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 0.736605] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.736762] hub 1-1:1.0: USB hub found [ 0.736852] hub 1-1:1.0: 6 ports detected [ 0.750601] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 0.750604] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.750756] hub 2-1:1.0: USB hub found [ 0.750850] hub 2-1:1.0: 8 ports detected [ 1.026370] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.026541] ata14.00: configured for UDMA/66 [ 1.304254] tsc: Refined TSC clocksource calibration: 3192.606 MHz [ 1.304257] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 1.304265] clocksource: Switched to clocksource tsc [ 1.362367] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.362536] ata14.00: configured for UDMA/66 [ 1.698373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.698540] ata14.00: configured for UDMA/66 [ 2.034373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.034540] ata14.00: configured for UDMA/66 [ 2.370386] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.370552] ata14.00: configured for UDMA/66 [ 2.706373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.706540] ata14.00: configured for UDMA/66 [ 3.042373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.042541] ata14.00: configured for UDMA/66 [ 3.378386] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.378553] ata14.00: configured for UDMA/66 [ 3.714373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.714540] ata14.00: configured for UDMA/66 [ 4.050372] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.050539] ata14.00: configured for UDMA/66 [ 4.386380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.386547] ata14.00: configured for UDMA/66 [ 4.706393] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.706560] ata14.00: configured for UDMA/66 [ 5.042394] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.042562] ata14.00: configured for UDMA/66 [ 5.378384] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.378550] ata14.00: configured for UDMA/66 [ 5.714394] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.714560] ata14.00: configured for UDMA/66 [ 6.050394] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.050561] ata14.00: configured for UDMA/66 [ 6.386385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.386553] ata14.00: configured for UDMA/66 [ 6.722395] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.722561] ata14.00: configured for UDMA/66 [ 7.058388] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.058554] ata14.00: configured for UDMA/66 [ 7.394384] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.394551] ata14.00: configured for UDMA/66 [ 7.730394] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.730561] ata14.00: configured for UDMA/66 [ 8.066394] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.066560] ata14.00: configured for UDMA/66 [ 8.402385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.402552] ata14.00: configured for UDMA/66 [ 8.722393] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.722559] ata14.00: configured for UDMA/66 [ 8.723424] Freeing unused decrypted memory: 2036K [ 8.723759] Freeing unused kernel image (initmem) memory: 3572K [ 8.734262] Write protecting the kernel read-only data: 32768k [ 8.734509] Freeing unused kernel image (rodata/data gap) memory: 1584K [ 8.774571] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.774575] rodata_test: all tests were successful [ 8.774576] x86/mm: Checking user space page tables [ 8.813117] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.813129] Run /init as init process [ 8.813130] with arguments: [ 8.813131] /init [ 8.813132] splash [ 8.813132] with environment: [ 8.813133] HOME=/ [ 8.813133] TERM=linux [ 9.055045] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.055227] ata14.00: configured for UDMA/66 [ 9.196069] raid6: skipped pq benchmark and selected sse2x4 [ 9.196073] raid6: using ssse3x2 recovery algorithm [ 9.200218] xor: measuring software checksum speed [ 9.200809] prefetch64-sse : 28070 MB/sec [ 9.201207] generic_sse : 24844 MB/sec [ 9.201208] xor: using function: prefetch64-sse (28070 MB/sec) [ 9.228425] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.228433] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 9.229494] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 9.229671] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.229673] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 9.229675] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 9.250569] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 9.250574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 9.250575] usb usb3: Product: xHCI Host Controller [ 9.250576] usb usb3: Manufacturer: Linux 6.5.1-1-cachyos xhci-hcd [ 9.250577] usb usb3: SerialNumber: ... [ 9.250712] hub 3-0:1.0: USB hub found [ 9.250729] hub 3-0:1.0: 14 ports detected [ 9.266913] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 9.266918] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 9.266919] usb usb4: Product: xHCI Host Controller [ 9.266920] usb usb4: Manufacturer: Linux 6.5.1-1-cachyos xhci-hcd [ 9.266921] usb usb4: SerialNumber: ... [ 9.267021] hub 4-0:1.0: USB hub found [ 9.267033] hub 4-0:1.0: 6 ports detected [ 9.356332] Btrfs loaded, zoned=yes, fsverity=yes [ 9.360106] BTRFS: device fsid HASH_12D-E469-1B56-7351-19BCBFE647B1 devid 1 transid 36202 /dev/sda2 scanned by (udev-worker) (246) [ 9.361674] cryptd: max_cpu_qlen set to 1000 [ 9.364526] firewire_ohci 0000:05:01.0: enabling device (0000 -> 0003) [ 9.376571] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.376746] ata14.00: configured for UDMA/66 [ 9.381629] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.381632] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.403730] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.424305] firewire_ohci 0000:05:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 9.500312] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 9.634423] usb 3-2: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00 [ 9.634428] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.634430] usb 3-2: Product: 802.11n [ 9.634431] usb 3-2: Manufacturer: Realtek [ 9.634432] usb 3-2: SerialNumber: ... [ 9.714465] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.714642] ata14.00: configured for UDMA/66 [ 9.750494] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd [ 9.766310] usb 4-5: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 9.766313] usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 9.767729] hub 4-5:1.0: USB hub found [ 9.768009] hub 4-5:1.0: 4 ports detected [ 9.791501] Setting dangerous option enable_dc - tainting kernel [ 9.792138] i915 0000:00:02.0: vgaarb: deactivate vga console [ 9.793206] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.815736] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 9.817046] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.817259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 9.882590] usb 3-9: new high-speed USB device number 3 using xhci_hcd [ 9.883399] fbcon: i915drmfb (fb0) is primary device [ 9.883400] fbcon: Deferring console take-over [ 9.883402] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 9.907821] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm [ 9.907829] BTRFS info (device sda2): using free space tree [ 9.915217] BTRFS info (device sda2): enabling ssd optimizations [ 9.915220] BTRFS info (device sda2): auto enabling async discard [ 9.944485] firewire_core 0000:05:01.0: created device fw0: GUID 00342b90b3e25b00, S400 [ 10.016440] usb 3-9: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 10.016445] usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.017250] hub 3-9:1.0: USB hub found [ 10.017304] hub 3-9:1.0: 4 ports detected [ 10.082377] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.082553] ata14.00: configured for UDMA/66 [ 10.134395] usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd [ 10.149965] usb 4-6: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 10.149969] usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.151240] hub 4-6:1.0: USB hub found [ 10.151500] hub 4-6:1.0: 4 ports detected [ 10.266252] usb 3-10: new high-speed USB device number 4 using xhci_hcd [ 10.398426] usb 3-10: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 10.398428] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.399231] hub 3-10:1.0: USB hub found [ 10.399247] hub 3-10:1.0: 4 ports detected [ 10.402385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.402560] ata14.00: configured for UDMA/66 [ 10.480254] usb 3-9.1: new low-speed USB device number 5 using xhci_hcd [ 10.581648] usb 3-9.1: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10 [ 10.581651] usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.581653] usb 3-9.1: Product: USB Keyboard [ 10.581654] usb 3-9.1: Manufacturer: SEM [ 10.668252] usb 3-9.3: new high-speed USB device number 6 using xhci_hcd [ 10.738386] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 10.738556] ata14.00: configured for UDMA/66 [ 10.764645] usb 3-9.3: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 10.764648] usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.764650] usb 3-9.3: Product: Cruzer Blade [ 10.764651] usb 3-9.3: Manufacturer: SanDisk [ 10.764652] usb 3-9.3: SerialNumber: ... [ 10.846254] usb 3-9.4: new full-speed USB device number 7 using xhci_hcd [ 10.944349] usb 3-9.4: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00 [ 10.944352] usb 3-9.4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 10.944354] usb 3-9.4: Product: 2.4G Mouse [ 11.074381] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 11.074549] ata14.00: configured for UDMA/66 [ 11.410384] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 11.410551] ata14.00: configured for UDMA/66 [ 11.742566] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 11.742752] ata14.00: configured for UDMA/66 [ 12.065490] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.065678] ata14.00: configured for UDMA/66 [ 12.086370] zram: Added device: zram0 [ 12.269499] device-mapper: uevent: version 1.0.3 [ 12.269696] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 12.270173] loop: module loaded [ 12.276505] fuse: init (API version 7.38) [ 12.320975] BTRFS info (device sda2: state M): force zstd compression, level 3 [ 12.385133] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.385312] ata14.00: configured for UDMA/66 [ 12.720710] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.720892] ata14.00: configured for UDMA/66 [ 12.769163] zram0: detected capacity change from 0 to 31830016 [ 13.002423] Adding 15915004k swap on /dev/zram0. Priority:100 extents:1 across:15915004k SSDscFS [ 13.056750] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.056939] ata14.00: configured for UDMA/66 [ 13.163028] dca service started, version 1.12.1 [ 13.181472] e1000e: Intel(R) PRO/1000 Network Driver [ 13.181475] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 13.181646] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 13.184904] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:1A2C:2124.0001/input/input3 [ 13.188660] usb-storage 3-9.3:1.0: USB Mass Storage device detected [ 13.189172] scsi host14: usb-storage 3-9.3:1.0 [ 13.190645] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20230331/utaddress-204) [ 13.190650] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 13.190653] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 13.190656] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 13.190657] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230331/utaddress-204) [ 13.190659] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 13.190661] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 13.190662] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230331/utaddress-204) [ 13.190664] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 13.190666] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 13.190666] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.193683] usbcore: registered new interface driver usb-storage [ 13.211254] igb: Intel(R) Gigabit Ethernet Network Driver [ 13.211257] igb: Copyright (c) 3B2C-7BF4 Intel Corporation. [ 13.220317] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 13.220776] usbcore: registered new interface driver uas [ 13.239320] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 13.239416] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 13.239436] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 13.239770] i2c i2c-7: 2/4 memory slots populated (from DMI) [ 13.240035] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-9.1/input0 [ 13.240062] i2c i2c-7: Successfully instantiated SPD at 0x50 [ 13.241259] i2c i2c-7: Successfully instantiated SPD at 0x52 [ 13.246461] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:1A2C:2124.0002/input/input5 [ 13.287137] pps pps0: new PPS source ptp0 [ 13.289776] igb 0000:02:00.0: added PHC on eth0 [ 13.289797] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 13.289798] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 115E5256EF61C20FEEC87B21701C1E08 [ 13.289842] igb 0000:02:00.0: eth0: PBA No: 000200-000 [ 13.289843] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 13.301548] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:1A2C:2124.0002/input/input6 [ 13.301594] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-9.1/input1 [ 13.304210] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4:1.0/0003:1EA7:0064.0003/input/input7 [ 13.304347] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4:1.0/0003:1EA7:0064.0003/input/input8 [ 13.304415] hid-generic 0003:1EA7:0064.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-9.4/input0 [ 13.304442] usbcore: registered new interface driver usbhid [ 13.304444] usbhid: USB HID core driver [ 13.324129] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 13.362697] igb 0000:02:00.0 enp2s0: renamed from eth0 [ 13.392381] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.392732] ata14.00: configured for UDMA/66 [ 13.507126] at24 7-0050: supply vcc not found, using dummy regulator [ 13.509017] at24 7-0050: 256 byte spd EEPROM, read-only [ 13.509047] at24 7-0052: supply vcc not found, using dummy regulator [ 13.509565] at24 7-0052: 256 byte spd EEPROM, read-only [ 13.548629] iTCO_vendor_support: vendor-support=0 [ 13.554883] mousedev: PS/2 mouse device common for all mice [ 13.577724] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.577964] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.579159] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) CB405F72BB11527FE28C1871D6B11AA2 [ 13.579164] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 13.579202] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 13.580787] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 13.580791] cfg80211: failed to load regulatory.db [ 13.588241] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 13.588244] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 13.588245] RAPL PMU: hw unit of domain package 2^-14 Joules [ 13.588246] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 13.588246] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 13.599691] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 13.723816] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 13.723945] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.724694] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 13.729752] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.732003] ata14.00: configured for UDMA/66 [ 13.735768] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 13.767824] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 13.767863] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 13.767893] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 13.783555] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC898: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 13.783561] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.783563] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 13.783565] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 13.783566] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e [ 13.783567] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 13.783568] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 13.783570] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 13.783571] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 13.783572] snd_hda_codec_realtek hdaudioC1D2: dig-in=0x1f [ 13.793809] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 13.805121] Creating 1 MTD partitions on "intel-spi": [ 13.805126] 0x000000000000-0x000001000000 : "BIOS" [ 13.808074] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 13.808117] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 13.808149] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 13.808177] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 13.808218] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 13.808245] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 13.808283] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 13.808311] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 13.971278] usb 3-2: RTL8188FU rev B (SMIC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 13.971285] usb 3-2: RTL8188FU MAC: 22C2F37FB5BB6EB431DFE7C1707E5E67 [ 13.971287] usb 3-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188fufw.bin [ 13.973307] usb 3-2: Firmware revision 4.0 (signature 0x88f1) [ 14.066322] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.066513] ata14.00: configured for UDMA/66 [ 14.075115] intel_rapl_common: Found RAPL domain package [ 14.075119] intel_rapl_common: Found RAPL domain core [ 14.075120] intel_rapl_common: Found RAPL domain uncore [ 14.075121] intel_rapl_common: Found RAPL domain dram [ 14.200451] scsi 14:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 14.203128] sd 14:0:0:0: [sdc] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 14.204352] sd 14:0:0:0: [sdc] Write Protect is off [ 14.204355] sd 14:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 14.204656] sd 14:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 14.208132] sdc: sdc1 [ 14.208203] sd 14:0:0:0: [sdc] Attached SCSI removable disk [ 14.399076] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.403094] ata14.00: configured for UDMA/66 [ 14.736102] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.736292] ata14.00: configured for UDMA/66 [ 15.019190] usbcore: registered new interface driver rtl8xxxu [ 15.022215] rtl8xxxu 3-2:1.0 wlp0s20u2: renamed from wlan0 [ 15.058180] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.060383] ata14.00: configured for UDMA/66 [ 15.394269] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.394479] ata14.00: configured for UDMA/66 [ 15.731294] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.731488] ata14.00: configured for UDMA/66 [ 16.066494] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.066672] ata14.00: configured for UDMA/66 [ 16.386504] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.386680] ata14.00: configured for UDMA/66 [ 16.718274] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.718596] ata14.00: configured for UDMA/66 [ 17.043012] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 17.043197] ata14.00: configured for UDMA/66 [ 17.362144] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 17.362328] ata14.00: configured for UDMA/66 [ 17.696469] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 17.696654] ata14.00: configured for UDMA/66 [ 18.007628] wlp0s20u2: authenticate with A43F34A74F72D84524AB61EC9D14AD25 [ 18.013586] wlp0s20u2: send auth to A43F34A74F72D84524AB61EC9D14AD25 (try 1/3) [ 18.015437] wlp0s20u2: authenticated [ 18.015579] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.015766] ata14.00: configured for UDMA/66 [ 18.016258] wlp0s20u2: associate with A43F34A74F72D84524AB61EC9D14AD25 (try 1/3) [ 18.019544] wlp0s20u2: RX AssocResp from A43F34A74F72D84524AB61EC9D14AD25 (capab=0x411 status=0 aid=1) [ 18.020330] usb 3-2: rtl8xxxu_bss_info_changed: HT supported [ 18.022097] wlp0s20u2: associated [ 18.339188] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.340410] ata14.00: configured for UDMA/66 [ 18.671320] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.671939] ata14.00: configured for UDMA/66 [ 18.763518] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=726 'kwin_wayland' [ 19.026687] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.026942] ata14.00: configured for UDMA/66 [ 19.361591] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.361812] ata14.00: configured for UDMA/66 [ 19.584988] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 19.686529] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.686721] ata14.00: configured for UDMA/66 [ 20.018507] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.018716] ata14.00: configured for UDMA/66 [ 20.338550] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.338737] ata14.00: configured for UDMA/66 [ 20.658961] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.659150] ata14.00: configured for UDMA/66 [ 20.978563] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.978744] ata14.00: configured for UDMA/66 [ 21.296834] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.297029] ata14.00: configured for UDMA/66 [ 21.616156] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.616359] ata14.00: configured for UDMA/66 [ 21.938621] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.938821] ata14.00: configured for UDMA/66 [ 22.271938] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.272132] ata14.00: configured for UDMA/66 [ 22.594937] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.595128] ata14.00: configured for UDMA/66 [ 22.927065] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.927675] ata14.00: configured for UDMA/66 [ 23.249952] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.250147] ata14.00: configured for UDMA/66 [ 23.566878] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.567068] ata14.00: configured for UDMA/66 [ 23.890565] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.890775] ata14.00: configured for UDMA/66 [ 24.210377] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.210562] ata14.00: configured for UDMA/66 [ 24.542975] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.543157] ata14.00: configured for UDMA/66 [ 24.866557] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.866745] ata14.00: configured for UDMA/66 [ 25.186434] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.186610] ata14.00: configured for UDMA/66 [ 25.506384] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.506563] ata14.00: configured for UDMA/66 [ 25.826646] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.826828] ata14.00: configured for UDMA/66 [ 26.148534] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.148736] ata14.00: configured for UDMA/66 [ 26.485521] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.485872] ata14.00: configured for UDMA/66 [ 26.818320] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 26.818533] ata14.00: configured for UDMA/66 [ 27.137109] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.140374] ata14.00: configured for UDMA/66 [ 27.474375] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.474553] ata14.00: configured for UDMA/66 [ 27.810483] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.810661] ata14.00: configured for UDMA/66 [ 28.146380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.146557] ata14.00: configured for UDMA/66 [ 28.482385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.482566] ata14.00: configured for UDMA/66 [ 28.818372] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 28.818550] ata14.00: configured for UDMA/66 [ 29.154402] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.154580] ata14.00: configured for UDMA/66 [ 29.490380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.490560] ata14.00: configured for UDMA/66 [ 29.826366] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.826611] ata14.00: configured for UDMA/66 [ 30.162374] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.162551] ata14.00: configured for UDMA/66 [ 30.498522] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.498701] ata14.00: configured for UDMA/66 [ 30.818374] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.818552] ata14.00: configured for UDMA/66 [ 31.154332] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.154512] ata14.00: configured for UDMA/66 [ 31.490402] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.490583] ata14.00: configured for UDMA/66 [ 31.826373] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.826551] ata14.00: configured for UDMA/66 [ 32.162472] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.162652] ata14.00: configured for UDMA/66 [ 32.498380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.498559] ata14.00: configured for UDMA/66 [ 32.835299] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.835486] ata14.00: configured for UDMA/66 [ 33.170432] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.170611] ata14.00: configured for UDMA/66 [ 33.490387] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.490567] ata14.00: configured for UDMA/66 [ 33.826377] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.826554] ata14.00: configured for UDMA/66 [ 34.162383] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.162557] ata14.00: configured for UDMA/66 [ 34.498371] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.498548] ata14.00: configured for UDMA/66 [ 34.834385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.834557] ata14.00: configured for UDMA/66 [ 35.171246] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.171426] ata14.00: configured for UDMA/66 [ 35.506380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.506558] ata14.00: configured for UDMA/66 [ 35.842431] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.842609] ata14.00: configured for UDMA/66 [ 36.178371] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.178548] ata14.00: configured for UDMA/66 [ 36.515003] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.515183] ata14.00: configured for UDMA/66 [ 36.850478] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.850658] ata14.00: configured for UDMA/66 [ 37.170380] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.170561] ata14.00: configured for UDMA/66 [ 37.506374] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.506551] ata14.00: configured for UDMA/66 [ 37.842377] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.842556] ata14.00: configured for UDMA/66 [ 38.179289] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.179471] ata14.00: configured for UDMA/66 [ 38.514470] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.514665] ata14.00: configured for UDMA/66 [ 38.834433] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.834611] ata14.00: configured for UDMA/66 [ 39.170469] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.170648] ata14.00: configured for UDMA/66 [ 39.506458] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.506638] ata14.00: configured for UDMA/66 [ 39.842866] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.843051] ata14.00: configured for UDMA/66 [ 40.174316] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.174491] ata14.00: configured for UDMA/66 [ 40.307158] wlp0s20u2: deauthenticating from A43F34A74F72D84524AB61EC9D14AD25 by local choice (Reason: 3=DEAUTH_LEAVING) [ 40.515211] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.515388] ata14.00: configured for UDMA/66 [ 40.846324] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.846498] ata14.00: configured for UDMA/66 [ 41.170385] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.170559] ata14.00: configured for UDMA/66 [ 41.506798] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.506987] ata14.00: configured for UDMA/66 [ 41.842637] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.842815] ata14.00: configured for UDMA/66 [ 41.919351] zram0: detected capacity change from 31830016 to 0