[ 0.000000] Linux version 6.8.0-38-generic (XXX@XXX) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #38-Ubuntu SMP PREEMPT_DYNAMIC Fri Jun 7 15:25:01 UTC 2024 (Ubuntu 6.8.0-38.38-generic 6.8.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-38-generic root=UUID=HASH_140-276A-DEAD-64CA-F43136B3A73B ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cb7efff] usable [ 0.000000] BIOS-e820: [mem 0x000000008cb7f000-0x000000008de7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008de7f000-0x000000008df7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008df7f000-0x000000008dffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008dfff000-0x000000008dffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x815ea018-0x815fa057] usable ==> usable [ 0.000000] e820: update [mem 0x815ea018-0x815fa057] usable ==> usable [ 0.000000] e820: update [mem 0x815e0018-0x815e9457] usable ==> usable [ 0.000000] e820: update [mem 0x815e0018-0x815e9457] usable ==> usable [ 0.000000] e820: update [mem 0x815d0018-0x815df457] usable ==> usable [ 0.000000] e820: update [mem 0x815d0018-0x815df457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000815d0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000815d0018-0x00000000815df457] usable [ 0.000000] reserve setup_data: [mem 0x00000000815df458-0x00000000815e0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000815e0018-0x00000000815e9457] usable [ 0.000000] reserve setup_data: [mem 0x00000000815e9458-0x00000000815ea017] usable [ 0.000000] reserve setup_data: [mem 0x00000000815ea018-0x00000000815fa057] usable [ 0.000000] reserve setup_data: [mem 0x00000000815fa058-0x000000008cb7efff] usable [ 0.000000] reserve setup_data: [mem 0x000000008cb7f000-0x000000008de7efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008de7f000-0x000000008df7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000008df7f000-0x000000008dffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000008dfff000-0x000000008dffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000044edfffff] usable [ 0.000000] efi: EFI v2.3.1 by HPQ [ 0.000000] efi: ACPI=0x8dffe000 ACPI 2.0=0x8dffe014 SMBIOS=0x8d333218 MOKvar=0x8d324000 INITRD=0x81b11698 [ 0.000000] efi: Not removing mem66: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem67: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.000000] efi: Not removing mem68: MMIO range=[0xffdb0000-0xffdcefff] (124KB) from e820 map [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 850 G1/198F, BIOS L71 Ver. 01.49 02/24/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.123 MHz processor [ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000016] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000029] last_pfn = 0x44ee00 max_arch_pfn = 0x400000000 [ 0.000040] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs [ 0.000043] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000534] last_pfn = 0x8e000 max_arch_pfn = 0x400000000 [ 0.012965] Using GB pages for direct mapping [ 0.013623] secureboot: Secure boot disabled [ 0.013624] RAMDISK: [mem 0x740fa000-0x77fa8fff] ACPI: Early table checksum verification disabled [ 0.014154] ACPI: RSDP 0x000000008DFFE014 000024 (v02 HPQOEM) [ 0.014162] ACPI: XSDT 0x000000008DFFE120 0000B4 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.014171] ACPI: FACP 0x000000008DFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001) [ 0.014181] ACPI: DSDT 0x000000008DFD1000 02555B (v02 HPQOEM 198F 00000001 INTL 20110112) [ 0.014188] ACPI: FACS 0x000000008DDE3000 000040 [ 0.014193] ACPI: FACS 0x000000008DDE3000 000040 [ 0.014199] ACPI: HPET 0x000000008DFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.014205] ACPI: APIC 0x000000008DFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.014211] ACPI: MCFG 0x000000008DFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.014216] ACPI: TCPA 0x000000008DFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001) [ 0.014222] ACPI: SSDT 0x000000008DFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.014229] ACPI: SSDT 0x000000008DFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.014234] ACPI: SLIC 0x000000008DFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.014240] ACPI: FPDT 0x000000008DFCA000 000044 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.014246] ACPI: BGRT 0x000000008DFC9000 000038 (v00 HPQOEM 198F 00000001 HP 00000001) [ 0.014252] ACPI: SSDT 0x000000008DFC5000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112) [ 0.014258] ACPI: SSDT 0x000000008DFC4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.014265] ACPI: SSDT 0x000000008DFC3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.014271] ACPI: SSDT 0x000000008DFC2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.014277] ACPI: SSDT 0x000000008DFC1000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.014283] ACPI: SSDT 0x000000008DFBF000 001455 (v01 HP AMDSGTBL 00001000 INTL 20110112) [ 0.014289] ACPI: ASF! 0x000000008DFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001) [ 0.014296] ACPI: DMAR 0x000000008DFBE000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.014300] ACPI: Reserving FACP table memory at [mem 0x8dffc000-0x8dffc10b] ACPI: Reserving DSDT table memory at [mem 0x8dfd1000-0x8dff655a] ACPI: Reserving FACS table memory at [mem 0x8dde3000-0x8dde303f] ACPI: Reserving FACS table memory at [mem 0x8dde3000-0x8dde303f] ACPI: Reserving HPET table memory at [mem 0x8dffb000-0x8dffb037] ACPI: Reserving APIC table memory at [mem 0x8dffa000-0x8dffa0bb] ACPI: Reserving MCFG table memory at [mem 0x8dff9000-0x8dff903b] ACPI: Reserving TCPA table memory at [mem 0x8dff7000-0x8dff7031] ACPI: Reserving SSDT table memory at [mem 0x8dfce000-0x8dfce312] ACPI: Reserving SSDT table memory at [mem 0x8dfcd000-0x8dfcd489] ACPI: Reserving SLIC table memory at [mem 0x8dfcc000-0x8dfcc175] ACPI: Reserving FPDT table memory at [mem 0x8dfca000-0x8dfca043] ACPI: Reserving BGRT table memory at [mem 0x8dfc9000-0x8dfc9037] ACPI: Reserving SSDT table memory at [mem 0x8dfc5000-0x8dfc5465] ACPI: Reserving SSDT table memory at [mem 0x8dfc4000-0x8dfc4543] ACPI: Reserving SSDT table memory at [mem 0x8dfc3000-0x8dfc3af2] ACPI: Reserving SSDT table memory at [mem 0x8dfc2000-0x8dfc21d4] ACPI: Reserving SSDT table memory at [mem 0x8dfc1000-0x8dfc1705] ACPI: Reserving SSDT table memory at [mem 0x8dfbf000-0x8dfc0454] ACPI: Reserving ASF! table memory at [mem 0x8dff8000-0x8dff80a4] ACPI: Reserving DMAR table memory at [mem 0x8dfbe000-0x8dfbe0af] No NUMA configuration found [ 0.014488] Faking a node at [mem 0x0000000000000000-0x000000044edfffff] NODE_DATA(0) allocated [mem 0x44edd5000-0x44edfffff] Zone ranges: [ 0.014803] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000044edfffff] Device empty [ 0.014815] Movable zone start for each node [ 0.014819] Early memory node ranges [ 0.014820] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x000000008cb7efff] node 0: [mem 0x000000008dfff000-0x000000008dffffff] node 0: [mem 0x0000000100000000-0x000000044edfffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000044edfffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014842] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014872] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.019316] On node 0, zone DMA32: 5248 pages in unavailable ranges [ 0.045983] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.046045] On node 0, zone Normal: 4608 pages in unavailable ranges [ 0.046055] Reserving Intel graphics memory at [mem 0x8f200000-0xaf1fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.046153] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.046156] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.046158] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.046159] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.046161] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.046162] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.046164] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.046165] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.046177] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.046182] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.046186] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.046193] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.046195] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.046209] e820: update [mem 0x8a248000-0x8a25bfff] usable ==> reserved [ 0.046229] TSC deadline timer available [ 0.046230] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.046250] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x815d0000-0x815d0fff] PM: hibernation: Registered nosave memory: [mem 0x815df000-0x815dffff] PM: hibernation: Registered nosave memory: [mem 0x815e0000-0x815e0fff] PM: hibernation: Registered nosave memory: [mem 0x815e9000-0x815e9fff] PM: hibernation: Registered nosave memory: [mem 0x815ea000-0x815eafff] PM: hibernation: Registered nosave memory: [mem 0x815fa000-0x815fafff] PM: hibernation: Registered nosave memory: [mem 0x8a248000-0x8a25bfff] PM: hibernation: Registered nosave memory: [mem 0x8cb7f000-0x8de7efff] PM: hibernation: Registered nosave memory: [mem 0x8de7f000-0x8df7efff] PM: hibernation: Registered nosave memory: [mem 0x8df7f000-0x8dffefff] PM: hibernation: Registered nosave memory: [mem 0x8e000000-0x8f1fffff] PM: hibernation: Registered nosave memory: [mem 0x8f200000-0xaf1fffff] PM: hibernation: Registered nosave memory: [mem 0xaf200000-0xe00f7fff] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffdaffff] PM: hibernation: Registered nosave memory: [mem 0xffdb0000-0xffdcefff] PM: hibernation: Registered nosave memory: [mem 0xffdcf000-0xffffffff] [mem 0xaf200000-0xe00f7fff] available for PCI devices [ 0.046300] Booting paravirtualized kernel on bare hardware [ 0.046303] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.046315] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.047126] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.047138] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.047142] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.047181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-38-generic root=UUID=HASH_140-276A-DEAD-64CA-F43136B3A73B ro quiet splash vt.handoff=7 [ 0.047316] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-38-generic", will be passed to user space. [ 0.047340] random: crng init done [ 0.049280] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.050257] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.050476] Fallback order for Node 0: 0 [ 0.050482] Built 1 zonelists, mobility grouping on. Total pages: 3981722 [ 0.050484] Policy zone: Normal [ 0.050495] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.050506] software IO TLB: area num 8. [ 0.116711] Memory: 15623604K/16180332K available (22528K kernel code, 4440K rwdata, 14300K rodata, 4972K init, 4736K bss, 556468K reserved, 0K cma-reserved) [ 0.118330] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.118352] Kernel/User page tables isolation: enabled [ 0.118404] ftrace: allocating 57844 entries in 226 pages [ 0.133954] ftrace: allocated 226 pages with 4 groups [ 0.135253] Dynamic Preempt: voluntary [ 0.135369] rcu: Preemptible hierarchical RCU implementation. [ 0.135371] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.135373] Trampoline variant of Tasks RCU enabled. [ 0.135374] Rude variant of Tasks RCU enabled. [ 0.135375] Tracing variant of Tasks RCU enabled. [ 0.135376] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.135377] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.140069] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.140312] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.140444] Console: colour dummy device 80x25 [ 0.140449] printk: legacy console [tty0] enabled [ 0.140532] ACPI: Core revision 20230628 [ 0.140792] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.140794] APIC: Switch to symmetric I/O mode setup [ 0.140798] DMAR: Host address width 39 [ 0.140800] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.140815] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.140819] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.140824] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.140827] DMAR: RMRR base: 0x0000008dd18000 end: 0x0000008dd37fff [ 0.140832] DMAR: RMRR base: 0x0000008f000000 end: 0x000000af1fffff [ 0.140834] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x000000008f000000-0x00000000af1fffff], contact BIOS vendor for fixes [ 0.140836] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x000000008f000000-0x00000000af1fffff] BIOS vendor: Hewlett-Packard; Ver: L71 Ver. 01.49; Product Version: A3009DD10203 [ 0.140841] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.140844] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.140846] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.141515] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.141519] x2apic enabled [ 0.141616] APIC: Switched APIC routing to: cluster x2apic [ 0.142161] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f389b4e04, max_idle_ns: 440795202126 ns [ 0.142171] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.24 BogoMIPS (lpj=2494123) [ 0.142205] CPU0: Thermal monitoring enabled (TM1) [ 0.142247] process: using mwait in idle threads [ 0.142253] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.142255] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.142260] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.142263] Spectre V2 : Mitigation: Retpolines [ 0.142265] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.142266] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.142267] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.142270] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.142272] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.142274] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.142277] MDS: Mitigation: Clear CPU buffers [ 0.142279] MMIO Stale Data: Unknown: No mitigations [ 0.142281] SRBDS: Mitigation: Microcode [ 0.142288] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.142290] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.142292] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.142294] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.142297] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.143167] Freeing SMP alternatives memory: 48K [ 0.143167] pid_max: default: 32768 minimum: 301 [ 0.143167] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.143167] landlock: Up and running. [ 0.143167] Yama: becoming mindful. [ 0.143167] AppArmor: AppArmor initialized [ 0.143167] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.143167] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.143167] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.143167] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.143167] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.143167] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.143167] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.143167] ... version: 3 [ 0.143167] ... bit width: 48 [ 0.143167] ... generic registers: 4 [ 0.143167] ... value mask: 0000ffffffffffff [ 0.143167] ... max period: 00007fffffffffff [ 0.143167] ... fixed-purpose events: 3 [ 0.143167] ... event mask: 000000070000000f [ 0.143167] signal: max sigframe size: 1776 [ 0.143167] Estimated ratio of average max frequency by base frequency (times 1024): 1064 [ 0.143167] rcu: Hierarchical SRCU implementation. [ 0.143167] rcu: Max phase no-delay instances is 400. [ 0.143987] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.144119] smp: Bringing up secondary CPUs ... [ 0.144290] smpboot: x86: Booting SMP configuration: [ 0.144292] .... node #0, CPUs: #2 #1 #3 [ 0.145498] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.145498] smp: Brought up 1 node, 4 CPUs [ 0.145498] smpboot: Max logical packages: 2 [ 0.145498] smpboot: Total of 4 processors activated (19952.98 BogoMIPS) [ 0.146829] devtmpfs: initialized [ 0.146829] x86/mm: Memory block size: 128MB [ 0.149250] ACPI: PM: Registering ACPI NVS region [mem 0x8de7f000-0x8df7efff] (1048576 bytes) [ 0.149299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.149315] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.149416] pinctrl core: initialized pinctrl subsystem [ 0.149525] PM: RTC time: 15:00:09, date: 2024-07-11 [ 0.150524] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.150886] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.151072] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.151257] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.151361] thermal_sys: Registered thermal governor 'fair_share' [ 0.151364] thermal_sys: Registered thermal governor 'bang_bang' [ 0.151366] thermal_sys: Registered thermal governor 'step_wise' [ 0.151368] thermal_sys: Registered thermal governor 'user_space' [ 0.151369] thermal_sys: Registered thermal governor 'power_allocator' [ 0.151380] EISA bus registered [ 0.151396] cpuidle: using governor ladder [ 0.151402] cpuidle: using governor menu [ 0.151482] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.151484] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.151634] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.151645] PCI: Using configuration type 1 for base access [ 0.151713] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.151845] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.152222] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.152225] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.152230] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.152233] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.153307] ACPI: Added _OSI(Module Device) [ 0.153311] ACPI: Added _OSI(Processor Device) [ 0.153314] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.153317] ACPI: Added _OSI(Processor Aggregator Device) [ 0.184828] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.187361] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.208762] ACPI: Dynamic OEM Table Load: [ 0.208776] ACPI: SSDT 0xFFFF903A01052800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.210277] ACPI: Dynamic OEM Table Load: [ 0.210289] ACPI: SSDT 0xFFFF903A01810800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.211890] ACPI: Dynamic OEM Table Load: [ 0.211900] ACPI: SSDT 0xFFFF903A01E4F000 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.214089] ACPI: _OSC evaluated successfully for all CPUs [ 0.214202] ACPI: EC: EC started [ 0.214204] ACPI: EC: interrupt blocked [ 1.652240] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.652246] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 1.652249] ACPI: Interpreter enabled [ 1.652297] ACPI: PM: (supports S0 S3 S4 S5) [ 1.652300] ACPI: Using IOAPIC for interrupt routing [ 1.653772] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 1.655495] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.655497] PCI: Using E820 reservations for host bridge windows [ 1.656021] ACPI: Enabled 8 GPEs in block 00 to 7F [ 1.658540] ACPI: \_SB_.PCI0.HDEF.APPR: New power resource [ 1.664235] ACPI: \_SB_.PCI0.LPCB.SIO_.COM1.COMP: New power resource [ 1.664801] ACPI: \_SB_.PCI0.LPCB.SIO_.LPT0.LPP_: New power resource [ 1.667388] ACPI: \_SB_.PCI0.RP06.PXP6: New power resource [ 1.782483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.782494] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.786955] PCI host bridge to bus 0000:00 [ 1.786959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 conventional PCI endpoint [ 1.787116] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 conventional PCI endpoint [ 1.787129] pci 0000:00:02.0: BAR 0 [mem 0xd0000000-0xd03fffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0x4000-0x403f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 1.787453] pci 0000:00:03.0: BAR 0 [mem 0xd0830000-0xd0833fff 64bit] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 conventional PCI endpoint [ 1.787622] pci 0000:00:14.0: BAR 0 [mem 0xd0820000-0xd082ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.787814] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 conventional PCI endpoint [ 1.787832] pci 0000:00:16.0: BAR 0 [mem 0xd0839000-0xd083901f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.787968] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002 conventional PCI endpoint [ 1.787982] pci 0000:00:16.3: BAR 0 [io 0x40b0-0x40b7] pci 0000:00:16.3: BAR 1 [mem 0xd083f000-0xd083ffff] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 conventional PCI endpoint [ 1.788134] pci 0000:00:19.0: BAR 0 [mem 0xd0800000-0xd081ffff] pci 0000:00:19.0: BAR 1 [mem 0xd083e000-0xd083efff] pci 0000:00:19.0: BAR 2 [io 0x4080-0x409f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.788325] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 1.788341] pci 0000:00:1b.0: BAR 0 [mem 0xd0834000-0xd0837fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.788525] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 PCIe Root Port [ 1.788552] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.788651] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.788654] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.789136] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 PCIe Root Port [ 1.789163] pci 0000:00:1c.3: PCI bridge to [bus 02] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.789272] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 1.789275] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 1.789764] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 PCIe Root Port [ 1.789792] pci 0000:00:1c.4: PCI bridge to [bus 03] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.789900] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 1.789903] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 1.791393] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400 PCIe Root Port [ 1.791421] pci 0000:00:1c.5: PCI bridge to [bus 04] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.791529] pci 0000:00:1c.5: Enabling MPC IRBNCE [ 1.791532] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled [ 1.792003] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 conventional PCI endpoint [ 1.792019] pci 0000:00:1d.0: BAR 0 [mem 0xd083d000-0xd083d3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.792232] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 conventional PCI endpoint [ 1.792472] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 conventional PCI endpoint [ 1.792486] pci 0000:00:1f.2: BAR 0 [io 0x40a8-0x40af] pci 0000:00:1f.2: BAR 1 [io 0x40bc-0x40bf] pci 0000:00:1f.2: BAR 2 [io 0x40a0-0x40a7] pci 0000:00:1f.2: BAR 3 [io 0x40b8-0x40bb] pci 0000:00:1f.2: BAR 4 [io 0x4060-0x407f] pci 0000:00:1f.2: BAR 5 [mem 0xd083c000-0xd083c7ff] pci 0000:00:1f.2: PME# supported from D3hot [ 1.792662] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 conventional PCI endpoint [ 1.792678] pci 0000:00:1f.3: BAR 0 [mem 0xd0838000-0xd08380ff 64bit] pci 0000:00:1f.3: BAR 4 [io 0xef80-0xef9f] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 PCIe Endpoint [ 1.792988] pci 0000:02:00.0: BAR 0 [mem 0xd0600000-0xd0601fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.793515] pci 0000:00:1c.3: PCI bridge to [bus 02] pci 0000:03:00.0: [1002:6601] type 00 class 0x030000 PCIe Legacy Endpoint [ 1.793641] pci 0000:03:00.0: BAR 0 [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:03:00.0: BAR 2 [mem 0xd0500000-0xd053ffff 64bit] pci 0000:03:00.0: BAR 4 [io 0x3000-0x30ff] pci 0000:03:00.0: ROM [mem 0xfffe0000-0xffffffff pref] pci 0000:03:00.0: enabling Extended Tags [ 1.793800] pci 0000:03:00.0: supports D1 D2 [ 1.793802] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 1.793857] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 1.794001] pci 0000:03:00.1: [1002:aab0] type 00 class 0x040300 PCIe Legacy Endpoint [ 1.794028] pci 0000:03:00.1: BAR 0 [mem 0xd0540000-0xd0543fff 64bit] pci 0000:03:00.1: enabling Extended Tags [ 1.794175] pci 0000:03:00.1: supports D1 D2 [ 1.794340] pci 0000:00:1c.4: PCI bridge to [bus 03] pci 0000:04:00.0: [10ec:5227] type 00 class 0xff0000 PCIe Endpoint [ 1.794430] pci 0000:04:00.0: BAR 0 [mem 0xd0400000-0xd0400fff] pci 0000:04:00.0: supports D1 D2 [ 1.794578] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.794759] pci 0000:00:1c.5: PCI bridge to [bus 04] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 1.796451] ACPI: PCI: Interrupt link LNKA disabled [ 1.796527] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 1.796529] ACPI: PCI: Interrupt link LNKB disabled [ 1.796601] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 1.796603] ACPI: PCI: Interrupt link LNKC disabled [ 1.796675] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 1.796677] ACPI: PCI: Interrupt link LNKD disabled [ 1.796749] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 1.796751] ACPI: PCI: Interrupt link LNKE disabled [ 1.796822] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 1.796824] ACPI: PCI: Interrupt link LNKF disabled [ 1.796895] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 1.796897] ACPI: PCI: Interrupt link LNKG disabled [ 1.796969] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 1.796971] ACPI: PCI: Interrupt link LNKH disabled [ 1.797708] ACPI: EC: interrupt unblocked [ 1.797711] ACPI: EC: event unblocked [ 1.797714] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.797717] ACPI: EC: GPE=0x6 [ 1.797719] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 1.797722] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 1.797821] iommu: Default domain type: Translated [ 1.797821] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.797821] SCSI subsystem initialized [ 1.798181] libata version 3.00 loaded. [ 1.798213] ACPI: bus type USB registered [ 1.798235] usbcore: registered new interface driver usbfs [ 1.798245] usbcore: registered new interface driver hub [ 1.798257] usbcore: registered new device driver usb [ 1.798294] pps_core: LinuxPPS API ver. 1 registered [ 1.798296] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 1.798300] PTP clock support registered [ 1.798321] EDAC MC: Ver: 3.0.0 [ 1.798321] efivars: Registered efivars operations [ 1.798501] NetLabel: Initializing [ 1.798504] NetLabel: domain hash size = 128 [ 1.798506] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.798533] NetLabel: unlabeled traffic allowed by default [ 1.798556] mctp: management component transport protocol core [ 1.798556] NET: Registered PF_MCTP protocol family [ 1.798556] PCI: Using ACPI for IRQ routing [ 1.803839] PCI: pci_cache_line_size set to 64 bytes [ 1.803893] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] e820: reserve RAM buffer [mem 0x815d0018-0x83ffffff] e820: reserve RAM buffer [mem 0x815e0018-0x83ffffff] e820: reserve RAM buffer [mem 0x815ea018-0x83ffffff] e820: reserve RAM buffer [mem 0x8a248000-0x8bffffff] e820: reserve RAM buffer [mem 0x8cb7f000-0x8fffffff] e820: reserve RAM buffer [mem 0x8e000000-0x8fffffff] e820: reserve RAM buffer [mem 0x44ee00000-0x44fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.804180] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.804182] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.804191] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.804193] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.804195] vgaarb: loaded [ 1.804270] clocksource: Switched to clocksource tsc-early [ 1.805073] VFS: Disk quotas dquot_6.6.0 [ 1.805096] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.805288] AppArmor: AppArmor Filesystem Enabled [ 1.805344] pnp: PnP ACPI init [ 1.805692] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.805698] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.805701] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.805703] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.805706] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.805709] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.805712] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.805714] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.805717] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.805719] system 00:00: [mem 0xaf210000-0xaf21ffff] has been reserved [ 1.805970] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.805974] system 00:01: [io 0xffff] has been reserved [ 1.805977] system 00:01: [io 0xffff] has been reserved [ 1.805979] system 00:01: [io 0xffff] has been reserved [ 1.805981] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.805984] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.806849] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 1.806854] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved [ 1.807268] pnp: PnP ACPI: found 7 devices [ 1.813656] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.813752] NET: Registered PF_INET protocol family [ 1.813970] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.841025] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.841072] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.841179] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.841519] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.841945] TCP: Hash tables configured (established 131072 bind 65536) [ 1.842096] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 1.842170] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.842232] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.842345] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.842356] NET: Registered PF_XDP protocol family [ 1.842363] pci 0000:03:00.0: ROM [mem 0xfffe0000-0xffffffff pref]: can't claim; no compatible bridge window [ 1.842374] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.842379] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1.842394] pci 0000:00:1c.5: bridge window [mem 0xaf300000-0xaf4fffff 64bit pref]: assigned [ 1.842399] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]: assigned [ 1.842404] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] pci 0000:00:1c.3: PCI bridge to [bus 02] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] pci 0000:03:00.0: ROM [mem 0xd0560000-0xd057ffff pref]: assigned [ 1.842436] pci 0000:00:1c.4: PCI bridge to [bus 03] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 04] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] pci 0000:00:1c.5: bridge window [mem 0xaf300000-0xaf4fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xaf200000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xd0400000-0xd04fffff] pci_bus 0000:04: resource 2 [mem 0xaf300000-0xaf4fffff 64bit pref] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.843127] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 1.843529] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 1.843545] PCI: CLS 64 bytes, default 64 [ 1.843630] DMAR: No ATSR found [ 1.843631] DMAR: No SATC found [ 1.843633] DMAR: IOMMU feature pgsel_inv inconsistent [ 1.843635] DMAR: IOMMU feature sc_support inconsistent [ 1.843637] DMAR: IOMMU feature pass_through inconsistent [ 1.843638] DMAR: dmar0: Using Queued invalidation [ 1.843647] DMAR: dmar1: Using Queued invalidation [ 1.843687] Trying to unpack rootfs image as initramfs... [ 1.962461] pci 0000:00:02.0: Adding to iommu group 0 [ 1.970860] pci 0000:00:00.0: Adding to iommu group 1 [ 1.970875] pci 0000:00:03.0: Adding to iommu group 2 [ 1.970889] pci 0000:00:14.0: Adding to iommu group 3 [ 1.970913] pci 0000:00:16.0: Adding to iommu group 4 [ 1.970926] pci 0000:00:16.3: Adding to iommu group 4 [ 1.970938] pci 0000:00:19.0: Adding to iommu group 5 [ 1.970957] pci 0000:00:1b.0: Adding to iommu group 6 [ 1.970970] pci 0000:00:1c.0: Adding to iommu group 7 [ 1.970984] pci 0000:00:1c.3: Adding to iommu group 8 [ 1.970998] pci 0000:00:1c.4: Adding to iommu group 9 [ 1.971012] pci 0000:00:1c.5: Adding to iommu group 10 [ 1.971025] pci 0000:00:1d.0: Adding to iommu group 11 [ 1.971054] pci 0000:00:1f.0: Adding to iommu group 12 [ 1.971069] pci 0000:00:1f.2: Adding to iommu group 12 [ 1.971083] pci 0000:00:1f.3: Adding to iommu group 12 [ 1.971097] pci 0000:02:00.0: Adding to iommu group 13 [ 1.971120] pci 0000:03:00.0: Adding to iommu group 14 [ 1.971135] pci 0000:03:00.1: Adding to iommu group 14 [ 1.971149] pci 0000:04:00.0: Adding to iommu group 15 [ 1.972827] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.972834] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.972836] software IO TLB: mapped [mem 0x000000008503d000-0x000000008903d000] (64MB) [ 1.973698] Initialise system trusted keyrings [ 1.973712] Key type blacklist registered [ 1.973807] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.973845] zbud: loaded [ 1.974385] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.974580] fuse: init (API version 7.39) [ 1.974840] integrity: Platform Keyring initialized [ 1.974853] integrity: Machine keyring initialized [ 2.001906] Key type asymmetric registered [ 2.001914] Asymmetric key parser 'x509' registered [ 2.001964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 2.002083] io scheduler mq-deadline registered [ 2.003759] Freeing initrd memory: 64188K [ 2.004323] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42 [ 2.004669] pcieport 0000:00:1c.3: PME: Signaling with IRQ 43 [ 2.004996] pcieport 0000:00:1c.4: PME: Signaling with IRQ 44 [ 2.005332] pcieport 0000:00:1c.5: PME: Signaling with IRQ 45 [ 2.005365] pcieport 0000:00:1c.5: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 2.005571] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.006395] ACPI: AC: AC Adapter [AC] (on-line) [ 2.006482] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.006510] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.006573] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.006729] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.031055] ACPI: thermal: Thermal Zone [CPUZ] (30 C) [ 2.055050] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.055057] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 2.070011] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.070018] ACPI: thermal: Thermal Zone [EXTZ] (0 C) [ 2.085155] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.085162] ACPI: thermal: Thermal Zone [LOCZ] (38 C) [ 2.100261] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.100268] ACPI: thermal: Thermal Zone [BATZ] (29 C) [ 2.100837] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.100841] ACPI: thermal: Thermal Zone [PCHZ] (0 C) [ 2.101170] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.104396] serial 0000:00:16.3: enabling device (0001 -> 0003) [ 2.121740] ACPI: battery: Slot [BAT0] (battery present) [ 2.125085] 0000:00:16.3: ttyS4 at I/O 0x40b0 (irq = 19, base_baud = 115200) is a 16550A [ 2.125619] hpet_acpi_add: no address or irqs in _CRS [ 2.125641] Linux agpgart interface v0.103 [ 2.129370] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) [ 2.159484] loop: module loaded [ 2.159813] ACPI: bus type drm_connector registered [ 2.160174] tun: Universal TUN/TAP device driver, 1.6 [ 2.160232] PPP generic driver version 2.4.2 [ 2.160422] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.160596] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.160607] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.160626] ehci-pci 0000:00:1d.0: debug port 2 [ 2.161575] i8042: Detected active multiplexing controller, rev 1.1 [ 2.162257] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.162265] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.162268] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.162270] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.162272] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.162420] mousedev: PS/2 mouse device common for all mice [ 2.162637] rtc_cmos 00:02: RTC can wake from S4 [ 2.162989] rtc_cmos 00:02: registered as rtc0 [ 2.163039] rtc_cmos 00:02: setting system clock to 2024-07-11T15:00:11 UTC (1720710011) [ 2.163074] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 2.163088] i2c_dev: i2c /dev entries driver [ 2.164583] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd083d000 [ 2.164647] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 2.164665] device-mapper: uevent: version 1.0.3 [ 2.164736] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 2.164770] platform eisa.0: Probing EISA bus 0 [ 2.164778] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.164781] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.164783] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.164785] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.164787] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.164789] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.164791] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.164793] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.164794] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.164796] platform eisa.0: EISA: Detected 0 cards [ 2.164806] intel_pstate: Intel P-state driver initializing [ 2.165414] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165588] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 2.166420] fbcon: Deferring console take-over [ 2.166425] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 2.166499] drop_monitor: Initializing network drop monitor service [ 2.166607] NET: Registered PF_INET6 protocol family [ 2.170852] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.171063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 2.171069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.171082] usb usb1: Product: EHCI Host Controller [ 2.171085] usb usb1: Manufacturer: Linux 6.8.0-38-generic ehci_hcd [ 2.171087] usb usb1: SerialNumber: ... [ 2.171335] hub 1-0:1.0: USB hub found [ 2.171353] hub 1-0:1.0: 3 ports detected [ 2.173702] Segment Routing with IPv6 [ 2.173719] In-situ OAM (IOAM) with IPv6 [ 2.173754] NET: Registered PF_PACKET protocol family [ 2.173796] Key type dns_resolver registered [ 2.174112] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 2.174161] microcode: Current revision: 0x00000026 [ 2.174255] IPI shorthand broadcast: enabled [ 2.176110] sched_clock: Marking stable (2174002338, 1820875)->(2241299106, -65475893) [ 2.176302] registered taskstats version 1 [ 2.176533] Loading compiled-in X.509 certificates [ 2.177229] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 2.177260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.177879] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 2.178423] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 2.178425] blacklist: Loading compiled-in revocation X.509 certificates [ 2.178446] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 2.178460] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 2.178475] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 2.178488] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 2.178502] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 2.178515] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 2.178528] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 2.178542] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 2.182544] Key type .fscrypt registered [ 2.182547] Key type fscrypt-provisioning registered [ 2.182593] Key type trusted registered [ 2.198723] Key type encrypted registered [ 2.198731] AppArmor: AppArmor sha256 policy hashing enabled [ 2.204778] Loading compiled-in module X.509 certificates [ 2.205374] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 2.205377] ima: Allocated hash algorithm: sha256 [ 2.241969] ima: No architecture policies found [ 2.241994] evm: Initialising EVM extended attributes: [ 2.241995] evm: security.selinux [ 2.241998] evm: security.SMACK64 [ 2.241999] evm: security.SMACK64EXEC [ 2.242000] evm: security.SMACK64TRANSMUTE [ 2.242002] evm: security.SMACK64MMAP [ 2.242003] evm: security.apparmor [ 2.242004] evm: security.ima [ 2.242005] evm: security.capability [ 2.242007] evm: HMAC attrs: 0x1 [ 2.242521] PM: Magic number: 0:385:32 [ 2.246536] RAS: Correctable Errors collector initialized. [ 2.246615] clk: Disabling unused clocks [ 2.248026] Freeing unused decrypted memory: 2028K [ 2.248698] Freeing unused kernel image (initmem) memory: 4972K [ 2.248759] Write protecting the kernel read-only data: 36864k [ 2.248955] Freeing unused kernel image (rodata/data gap) memory: 36K [ 2.296806] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.296808] x86/mm: Checking user space page tables [ 2.342891] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.342896] Run /init as init process [ 2.342897] with arguments: [ 2.342899] /init [ 2.342900] splash [ 2.342901] with environment: [ 2.342902] HOME=/ [ 2.342902] TERM=linux [ 2.342903] BOOT_IMAGE=/boot/vmlinuz-6.8.0-38-generic [ 2.407847] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.526400] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_362-801B-1C3D-2638-F8882CF5E53F has zero instances [ 2.536148] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 2.536158] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.536621] hub 1-1:1.0: USB hub found [ 2.536769] hub 1-1:1.0: 8 ports detected [ 2.539115] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002) [ 2.539861] e1000e: Intel(R) PRO/1000 Network Driver [ 2.539865] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.542240] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.542323] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.542761] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.544575] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 2.547784] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.547795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.547801] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.548428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 2.548434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.548437] usb usb2: Product: xHCI Host Controller [ 2.548440] usb usb2: Manufacturer: Linux 6.8.0-38-generic xhci-hcd [ 2.548443] usb usb2: SerialNumber: ... [ 2.556028] ahci 0000:00:1f.2: version 3.0 [ 2.562714] hub 2-0:1.0: USB hub found [ 2.562749] hub 2-0:1.0: 9 ports detected [ 2.568353] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 2.568364] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.593723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 2.593732] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.593736] usb usb3: Product: xHCI Host Controller [ 2.593740] usb usb3: Manufacturer: Linux 6.8.0-38-generic xhci-hcd [ 2.593742] usb usb3: SerialNumber: ... [ 2.594909] scsi host0: ahci [ 2.595667] hub 3-0:1.0: USB hub found [ 2.596162] hub 3-0:1.0: 4 ports detected [ 2.600783] scsi host1: ahci [ 2.600931] ata1: SATA max UDMA/133 abar m2048@0xd083c000 port 0xd083c100 irq 53 lpm-pol 3 [ 2.600937] ata2: DUMMY [ 2.724086] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.787574] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) BBA3C48FB221A3261452FDEA08A1E669 [ 2.787583] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.787616] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.823942] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 2.908510] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.910537] ata1.00: supports DRM functions and may not be fully accessible [ 2.910546] ata1.00: ATA-9: SAMSUNG MZ7TY256HDHP-000L7, MAT03L6Q, max UDMA/133 [ 2.911448] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.913885] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 2.914627] ata1.00: supports DRM functions and may not be fully accessible [ 2.918390] ata1.00: configured for UDMA/133 [ 2.928547] ahci 0000:00:1f.2: port does not support device sleep [ 2.929073] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TY256 3L6Q PQ: 0 ANSI: 5 [ 2.929724] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.929833] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.929911] sd 0:0:0:0: [sda] Write Protect is off [ 2.929917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.929950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.929990] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.932138] sda: sda1 sda2 [ 2.932553] sd 0:0:0:0: [sda] supports TCG Opal [ 2.932558] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.936230] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.950187] usb 2-3: New USB device found, idVendor=0424, idProduct=2134, bcdDevice=50.00 [ 2.950194] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.950196] usb 2-3: Product: USB2134B [ 2.950198] usb 2-3: Manufacturer: SMSC [ 2.951009] hub 2-3:1.0: USB hub found [ 2.951045] hub 2-3:1.0: 4 ports detected [ 2.989897] tsc: Refined TSC clocksource calibration: 2494.226 MHz [ 2.989911] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns [ 2.989951] clocksource: Switched to clocksource tsc [ 3.064035] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd [ 3.077110] usb 3-3: New USB device found, idVendor=0424, idProduct=5534, bcdDevice=50.00 [ 3.077127] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 3.077133] usb 3-3: Product: USB5534B [ 3.077138] usb 3-3: Manufacturer: SMSC [ 3.078844] hub 3-3:1.0: USB hub found [ 3.079101] hub 3-3:1.0: 4 ports detected [ 3.080714] usb: port power management may be unreliable [ 3.190924] usb 2-5: new full-speed USB device number 3 using xhci_hcd [ 3.318766] usb 2-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04 [ 3.318783] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.318790] usb 2-5: SerialNumber: ... [ 3.392937] usb 2-3.2: new full-speed USB device number 4 using xhci_hcd [ 3.469168] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 3.482616] usb 2-3.2: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 3.482633] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.594944] usb 2-7: new high-speed USB device number 5 using xhci_hcd [ 3.758807] usb 2-7: New USB device found, idVendor=04f2, idProduct=b389, bcdDevice=85.62 [ 3.758855] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 3.758862] usb 2-7: Product: HP HD Webcam [ 3.758868] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.758875] usb 2-7: SerialNumber: ... [ 4.256099] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4706] psmouse serio3: synaptics: queried min coordinates: x [1368..], y [1234..] psmouse serio3: synaptics: Your touchpad (PNP: SYN3003 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 4.350605] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2769, fw id: 1478014 [ 4.388812] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 4.761204] EXT4-fs (sda2): orphan cleanup on readonly fs [ 4.761604] EXT4-fs (sda2): mounted filesystem HASH_140-276A-DEAD-64CA-F43136B3A73B ro with ordered data mode. Quota mode: none. [ 5.379664] pstore: Using crash dump compression: deflate [ 5.421518] lp: driver loaded but no devices found [ 5.431906] ppdev: user-space parallel port driver [ 5.444886] EXT4-fs (sda2): re-mounted HASH_140-276A-DEAD-64CA-F43136B3A73B r/w. Quota mode: none. [ 5.498585] pstore: Registered efi_pstore as persistent store backend [ 5.510298] Adding 4194300k swap on /swap.img. Priority:-2 extents:9 across:59146240k SS [ 5.558241] loop0: detected capacity change from 0 to 8 [ 5.567585] loop1: detected capacity change from 0 to 152040 [ 5.567762] loop2: detected capacity change from 0 to 149488 [ 5.571114] loop3: detected capacity change from 0 to 495928 [ 5.581784] loop4: detected capacity change from 0 to 943256 [ 5.583488] loop5: detected capacity change from 0 to 21952 [ 5.589109] loop6: detected capacity change from 0 to 187776 [ 5.596061] loop7: detected capacity change from 0 to 25240 [ 5.605045] loop8: detected capacity change from 0 to 26472 [ 5.606377] loop9: detected capacity change from 0 to 109032 [ 5.610968] loop11: detected capacity change from 0 to 904 [ 5.611598] loop12: detected capacity change from 0 to 284400 [ 5.617083] loop10: detected capacity change from 0 to 79520 [ 6.065664] input: Wireless hotkeys as /devices/virtual/input/input12 [ 6.159896] hp_accel: laptop model unknown, using default axes configuration [ 6.286979] mc: Linux media interface: v0.10 [ 6.287089] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) [ 6.287429] lis3lv02d: 8 bits 3DC sensor found [ 6.287644] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 6.287668] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 6.288231] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.288525] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.288657] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 6.288744] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 6.289913] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 6.363398] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 6.368005] videodev: Linux video capture interface: v2.00 [ 6.391257] Intel(R) Wireless WiFi driver for Linux [ 6.391332] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 6.413978] iwlwifi 0000:02:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0 [ 6.413994] iwlwifi 0000:02:00.0: PCI dev 08b1/4060, rev=0x144, rfid=0xd55555d5 [ 6.433047] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm [ 6.454239] Bluetooth: Core ver 2.22 [ 6.454273] NET: Registered PF_BLUETOOTH protocol family [ 6.454276] Bluetooth: HCI device and connection manager initialized [ 6.454282] Bluetooth: HCI socket layer initialized [ 6.454285] Bluetooth: L2CAP socket layer initialized [ 6.454291] Bluetooth: SCO socket layer initialized [ 6.457330] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14 [ 6.508795] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.508803] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.508805] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.508807] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.508809] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 7.045396] cryptd: max_cpu_qlen set to 1000 [ 7.048507] at24 0-0050: supply vcc not found, using dummy regulator [ 7.055924] at24 0-0050: 256 byte spd EEPROM, read-only [ 7.059310] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 7.065241] AVX2 version of gcm_enc/dec engaged. [ 7.065296] AES CTR mode by8 optimization enabled [ 7.072092] usb 2-7: Found UVC 1.00 device HP HD Webcam (04f2:b389) [ 7.078719] usbcore: registered new interface driver uvcvideo [ 7.087217] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 7.087578] i915 0000:00:02.0: vgaarb: deactivate vga console [ 7.087667] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 7.087675] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 7.092903] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 7.105068] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002) [ 7.105215] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 7.105219] snd_hda_intel 0000:03:00.1: Force to non-snoop mode [ 7.154993] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem [ 7.189504] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 7.189515] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 7.189518] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 7.189522] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 7.189525] snd_hda_codec_idt hdaudioC0D0: inputs: [ 7.189527] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 7.189530] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 7.189533] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 7.203853] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:03:00.1/sound/card1/input15 [ 7.219733] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:03:00.1/sound/card1/input16 [ 7.237043] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144 [ 7.237067] usbcore: registered new interface driver btusb [ 7.239593] Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013 [ 7.240692] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 7.246915] spi-nor spi0.0: BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash [ 7.246921] spi-nor: probe of spi0.0 failed with error -95 [ 7.260802] iwlwifi 0000:02:00.0: base HW address: 39DC57681783DD0656011E76C64B895C, OTP minor version: 0x0 [ 7.261947] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 7.262072] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 7.262191] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 7.270063] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 7.367448] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1 [ 7.370059] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.370483] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21 [ 7.370700] ACPI: video: [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS [ 7.380628] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated [ 7.381185] ACPI: video: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 7.381516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/LNXVIDEO:01/input/input22 [ 7.383613] i915 display info: display version: 7 [ 7.383620] i915 display info: cursor_needs_physical: no [ 7.383623] i915 display info: has_cdclk_crawl: no [ 7.383625] i915 display info: has_cdclk_squash: no [ 7.383627] i915 display info: has_ddi: yes [ 7.383629] i915 display info: has_dp_mst: yes [ 7.383632] i915 display info: has_dsb: no [ 7.383634] i915 display info: has_fpga_dbg: yes [ 7.383636] i915 display info: has_gmch: no [ 7.383638] i915 display info: has_hotplug: yes [ 7.383640] i915 display info: has_hti: no [ 7.383642] i915 display info: has_ipc: no [ 7.383644] i915 display info: has_overlay: no [ 7.383646] i915 display info: has_psr: yes [ 7.383648] i915 display info: has_psr_hw_tracking: yes [ 7.383650] i915 display info: overlay_needs_physical: no [ 7.383653] i915 display info: supports_tv: no [ 7.383655] i915 display info: has_hdcp: no [ 7.383657] i915 display info: has_dmc: no [ 7.383659] i915 display info: has_dsc: no [ 7.389109] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.393768] fbcon: i915drmfb (fb0) is primary device [ 7.393774] fbcon: Deferring console take-over [ 7.393779] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 7.400271] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card2/input23 [ 7.400366] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card2/input24 [ 7.400451] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card2/input25 [ 7.463164] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.552043] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0 [ 7.596896] intel_rapl_common: Found RAPL domain package [ 7.596904] intel_rapl_common: Found RAPL domain core [ 7.596906] intel_rapl_common: Found RAPL domain uncore [ 7.596907] intel_rapl_common: Found RAPL domain dram [ 8.741448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.741456] Bluetooth: BNEP filters: protocol multicast [ 8.741462] Bluetooth: BNEP socket layer initialized [ 8.750579] Bluetooth: MGMT ver 1.22 [ 8.764233] NET: Registered PF_ALG protocol family [ 9.272841] loop13: detected capacity change from 0 to 8 [ 9.329976] NET: Registered PF_QIPCRTR protocol family [ 10.662005] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 11.589847] Bluetooth: RFCOMM TTY layer initialized [ 11.589857] Bluetooth: RFCOMM socket layer initialized [ 11.589862] Bluetooth: RFCOMM ver 1.11 [ 13.786005] wlo1: 80 MHz not supported, disabling VHT [ 13.791615] wlo1: authenticate with 463540C1BC7E0FC1628FECFCF71F644E (local address=39DC57681783DD0656011E76C64B895C) [ 13.792495] wlo1: send auth to 463540C1BC7E0FC1628FECFCF71F644E (try 1/3) [ 13.793895] wlo1: authenticated [ 13.794849] wlo1: associate with 463540C1BC7E0FC1628FECFCF71F644E (try 1/3) [ 13.796101] wlo1: RX AssocResp from 463540C1BC7E0FC1628FECFCF71F644E (capab=0x1011 status=0 aid=3) [ 13.805688] wlo1: associated [ 13.838472] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 463540C1BC7E0FC1628FECFCF71F644E [ 14.087529] rfkill: input handler disabled [ 21.376606] rfkill: input handler enabled [ 24.089711] rfkill: input handler disabled [ 439.690944] rfkill: input handler enabled [ 440.374536] wlo1: deauthenticating from 463540C1BC7E0FC1628FECFCF71F644E by local choice (Reason: 3=DEAUTH_LEAVING)