[ 0.000000] Linux version 6.6.13+bpo-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.6.13-1~bpo12+1 (2024-02-15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.572 MHz processor [ 0.002590] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002594] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008905] AGP: No AGP bridge found [ 0.008963] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008970] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008972] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010737] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010745] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016260] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016812] RAMDISK: [mem 0x2d917000-0x32c82fff] ACPI: Early table checksum verification disabled [ 0.016824] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016828] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016835] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016840] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.016844] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016849] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016852] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016856] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016860] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016863] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016867] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016870] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016874] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016877] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.016959] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017359] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017366] Movable zone start for each node [ 0.017370] Early memory node ranges [ 0.017371] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017433] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027535] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027561] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027575] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028469] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028529] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028755] ACPI: PM-Timer IO Port: 0x808 [ 0.028763] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028771] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028775] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028777] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028779] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028784] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028785] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028790] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.028809] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028841] Booting paravirtualized kernel on bare hardware [ 0.028843] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034363] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035074] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.035082] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.035086] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035111] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.035179] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64", will be passed to user space. [ 0.041745] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045045] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045138] Fallback order for Node 0: 0 [ 0.045143] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.045145] Policy zone: Normal [ 0.045154] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045156] AGP: Checking aperture... [ 0.051481] AGP: No AGP bridge found [ 0.051483] AGP: Node 0: aperture [bus addr 0x84de000000-0x84dfffffff] (32MB) [ 0.051485] Aperture beyond 4GB. Ignoring. [ 0.051486] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051487] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051487] AGP: This costs you 64MB of RAM [ 0.051490] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051493] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.097806] Memory: 3160624K/25119580K available (16384K kernel code, 2363K rwdata, 10544K rodata, 3964K init, 3628K bss, 705672K reserved, 0K cma-reserved) [ 0.106924] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107111] ftrace: allocating 43115 entries in 169 pages [ 0.120284] ftrace: allocated 169 pages with 4 groups [ 0.121455] Dynamic Preempt: voluntary [ 0.121689] rcu: Preemptible hierarchical RCU implementation. [ 0.121690] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.121692] Trampoline variant of Tasks RCU enabled. [ 0.121693] Rude variant of Tasks RCU enabled. [ 0.121693] Tracing variant of Tasks RCU enabled. [ 0.121694] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.121695] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125902] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.126103] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.126204] spurious 8259A interrupt: IRQ7. [ 0.129549] Console: colour VGA+ 80x25 [ 0.129552] printk: console [tty0] enabled [ 0.129818] ACPI: Core revision 20230628 [ 0.129978] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.129991] APIC: Switch to symmetric I/O mode setup [ 0.130339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.149990] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c978f3f059, max_idle_ns: 440795302500 ns [ 0.149997] Calibrating delay loop (skipped), value calculated using timer frequency.. 6187.14 BogoMIPS (lpj=12374288) [ 0.150020] LVT offset 1 assigned for vector 0xf9 [ 0.150027] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150029] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150033] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150035] Spectre V2 : Mitigation: Retpolines [ 0.150036] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150037] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150038] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150039] RETBleed: Mitigation: untrained return thunk [ 0.150041] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150043] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150048] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150050] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150051] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150053] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150054] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.176964] Freeing SMP alternatives memory: 36K [ 0.176969] pid_max: default: 32768 minimum: 301 [ 0.177817] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.178077] landlock: Up and running. [ 0.178078] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.178105] AppArmor: AppArmor initialized [ 0.178108] TOMOYO Linux initialized [ 0.178115] LSM support for eBPF active [ 0.178495] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.178582] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.292549] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.292811] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292832] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292860] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.292882] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.292912] ... version: 0 [ 0.292913] ... bit width: 48 [ 0.292914] ... generic registers: 6 [ 0.292915] ... value mask: 0000ffffffffffff [ 0.292916] ... max period: 00007fffffffffff [ 0.292917] ... fixed-purpose events: 0 [ 0.292918] ... event mask: 000000000000003f [ 0.293024] signal: max sigframe size: 1776 [ 0.293074] rcu: Hierarchical SRCU implementation. [ 0.293075] rcu: Max phase no-delay instances is 1000. [ 0.293993] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.293993] smp: Bringing up secondary CPUs ... [ 0.293993] smpboot: x86: Booting SMP configuration: [ 0.293993] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.323995] smp: Brought up 1 node, 8 CPUs [ 0.323995] smpboot: Max logical packages: 1 [ 0.323995] smpboot: Total of 8 processors activated (49497.15 BogoMIPS) [ 0.381165] node 0 deferred pages initialised in 52ms [ 0.382530] devtmpfs: initialized [ 0.382530] x86/mm: Memory block size: 128MB [ 0.386327] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.386327] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.386327] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386327] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.386456] pinctrl core: initialized pinctrl subsystem [ 0.387736] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.388576] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.389315] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.390450] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.390814] thermal_sys: Registered thermal governor 'fair_share' [ 0.390814] thermal_sys: Registered thermal governor 'bang_bang' [ 0.390814] thermal_sys: Registered thermal governor 'step_wise' [ 0.390814] thermal_sys: Registered thermal governor 'user_space' [ 0.390814] thermal_sys: Registered thermal governor 'power_allocator' [ 0.390814] cpuidle: using governor ladder [ 0.390814] cpuidle: using governor menu [ 0.390814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.390814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.390814] PCI: not using MMCONFIG [ 0.390814] PCI: Using configuration type 1 for base access [ 0.390814] PCI: Using configuration type 1 for extended access [ 0.390814] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.390814] mtrr: probably your BIOS does not setup all CPUs. [ 0.390814] mtrr: corrected configuration. [ 0.390871] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.390879] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390879] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.390879] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390879] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.390879] ACPI: Added _OSI(Module Device) [ 0.390879] ACPI: Added _OSI(Processor Device) [ 0.390879] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390879] ACPI: Added _OSI(Processor Aggregator Device) [ 0.397768] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.414039] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.414271] ACPI: Interpreter enabled [ 0.414289] ACPI: PM: (supports S0 S3 S4 S5) [ 0.414291] ACPI: Using IOAPIC for interrupt routing [ 0.414446] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.414492] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.414511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414513] PCI: Using E820 reservations for host bridge windows [ 0.414662] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.422148] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.422155] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.422552] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.422712] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.422729] pci 0000:00:02.0: enabling Extended Tags [ 0.422753] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.422852] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.422869] pci 0000:00:04.0: enabling Extended Tags [ 0.422893] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.422991] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.423008] pci 0000:00:05.0: enabling Extended Tags [ 0.423031] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.423121] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.423139] pci 0000:00:06.0: enabling Extended Tags [ 0.423162] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.423257] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.423274] pci 0000:00:09.0: enabling Extended Tags [ 0.423321] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.423413] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.423431] pci 0000:00:0a.0: enabling Extended Tags [ 0.423454] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.423553] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.423567] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.423724] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.423737] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.423874] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.423936] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.424026] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.424040] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.424184] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.424246] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.424333] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.424460] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.424473] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.424645] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.424781] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.424924] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.425041] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.425054] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.425206] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.425360] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.425422] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.425510] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.425566] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.425618] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.425677] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.425732] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.425783] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.425879] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 [ 0.425894] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.425949] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.426003] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.426063] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.426158] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.426172] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.426246] pci 0000:01:00.1: supports D1 D2 [ 0.426336] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.426409] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.426485] pci 0000:02:00.0: PME# supported from D3hot [ 0.426564] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.426634] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.426716] pci 0000:03:00.0: supports D1 D2 [ 0.426717] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.426815] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.426884] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.426988] pci 0000:04:00.0: supports D1 D2 [ 0.426990] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.427085] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.427165] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.427251] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.427361] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.427377] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.427478] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.438017] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.438105] pci 0000:06:00.0: reg 0x10: [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.438372] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.438422] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.438440] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.438604] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.438609] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.438615] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.438617] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.438619] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.438621] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.438623] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.439439] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.439505] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.439568] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.439629] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.439680] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.439720] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.439760] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.439800] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.439995] iommu: Default domain type: Translated [ 0.439995] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.439995] pps_core: LinuxPPS API ver. 1 registered [ 0.439995] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.439995] PTP clock support registered [ 0.439995] EDAC MC: Ver: 3.0.0 [ 0.439995] NetLabel: Initializing [ 0.439995] NetLabel: domain hash size = 128 [ 0.439995] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.439995] NetLabel: unlabeled traffic allowed by default [ 0.439995] PCI: Using ACPI for IRQ routing [ 0.445004] PCI: pci_cache_line_size set to 64 bytes [ 0.445067] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.446035] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.446035] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.446035] vgaarb: loaded [ 0.446089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.446094] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.447110] clocksource: Switched to clocksource tsc-early [ 0.447998] VFS: Disk quotas dquot_6.6.0 [ 0.448088] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.448368] AppArmor: AppArmor Filesystem Enabled [ 0.448390] pnp: PnP ACPI init [ 0.448532] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.448674] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.449141] system 00:03: [io 0x040b] has been reserved [ 0.449144] system 00:03: [io 0x04d6] has been reserved [ 0.449147] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.449149] system 00:03: [io 0x0c14] has been reserved [ 0.449152] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.449155] system 00:03: [io 0x0c52] has been reserved [ 0.449157] system 00:03: [io 0x0c6c] has been reserved [ 0.449159] system 00:03: [io 0x0c6f] has been reserved [ 0.449162] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.449164] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.449167] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.449169] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.449172] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.449174] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.449177] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.449180] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.449183] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.449185] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.449189] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.449192] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.449196] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.449200] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.449203] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.449206] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.449210] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.449338] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.449622] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.449622] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.456675] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.456983] NET: Registered PF_INET protocol family [ 0.457354] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.462202] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.462275] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.462629] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.463289] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.463582] TCP: Hash tables configured (established 262144 bind 65536) [ 0.463940] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.464137] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.464289] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.464485] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.464495] NET: Registered PF_XDP protocol family [ 0.464515] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 27378 usecs [ 0.512736] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.532734] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19334 usecs [ 0.552734] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19520 usecs [ 0.552967] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.553285] PCI: CLS 64 bytes, default 64 [ 0.553401] Trying to unpack rootfs image as initramfs... [ 0.554146] PCI-DMA: Disabling AGP. [ 0.554215] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.554217] PCI-DMA: using GART IOMMU. [ 0.554219] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.555100] software IO TLB: tearing down default memory pool [ 0.557631] LVT offset 0 assigned for vector 0x400 [ 0.562235] perf: AMD IBS detected (0x000000ff) [ 0.562242] amd_uncore: 4 amd_nb counters detected [ 0.569592] Initialise system trusted keyrings [ 0.569614] Key type blacklist registered [ 0.569735] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.569746] zbud: loaded [ 0.570152] fuse: init (API version 7.39) [ 0.570504] integrity: Platform Keyring initialized [ 0.570511] integrity: Machine keyring initialized [ 0.582142] Key type asymmetric registered [ 0.582146] Asymmetric key parser 'x509' registered [ 1.469336] Freeing initrd memory: 85424K [ 1.475942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.476014] io scheduler mq-deadline registered [ 1.478285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.478338] ACPI: \_PR_.P001: Found 2 idle states [ 1.478441] ACPI: \_PR_.P002: Found 2 idle states [ 1.478531] ACPI: \_PR_.P003: Found 2 idle states [ 1.478632] ACPI: \_PR_.P004: Found 2 idle states [ 1.478721] ACPI: \_PR_.P005: Found 2 idle states [ 1.478817] ACPI: \_PR_.P006: Found 2 idle states [ 1.478911] ACPI: \_PR_.P007: Found 2 idle states [ 1.478993] ACPI: \_PR_.P008: Found 2 idle states [ 1.479421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.479608] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.480511] Linux agpgart interface v0.103 [ 1.480578] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.481491] i8042: PNP: No PS/2 controller found. [ 1.481577] mousedev: PS/2 mouse device common for all mice [ 1.481609] rtc_cmos 00:06: RTC can wake from S4 [ 1.481806] rtc_cmos 00:06: registered as rtc0 [ 1.481828] rtc_cmos 00:06: setting system clock to 2024-05-17T12:37:46 UTC (1715949466) [ 1.481856] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.481866] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.482130] ledtrig-cpu: registered to indicate activity on CPUs [ 1.494851] NET: Registered PF_INET6 protocol family [ 1.501271] Segment Routing with IPv6 [ 1.501287] In-situ OAM (IOAM) with IPv6 [ 1.501312] mip6: Mobile IPv6 [ 1.501316] NET: Registered PF_PACKET protocol family [ 1.501358] mpls_gso: MPLS GSO support [ 1.501373] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.501951] microcode: microcode updated early to new patch_level=0x0600063e [ 1.502001] microcode: CPU6: patch_level=0x0600063e [ 1.502001] microcode: CPU2: patch_level=0x0600063e [ 1.502001] microcode: CPU3: patch_level=0x0600063e [ 1.502003] microcode: CPU7: patch_level=0x0600063e [ 1.502003] microcode: CPU4: patch_level=0x0600063e [ 1.502003] microcode: CPU5: patch_level=0x0600063e [ 1.502017] microcode: CPU1: patch_level=0x0600063e [ 1.502017] microcode: CPU0: patch_level=0x0600063e [ 1.508152] microcode: CPU6: new patch_level=0x0600063e [ 1.508154] microcode: CPU2: new patch_level=0x0600063e [ 1.514289] microcode: CPU4: new patch_level=0x0600063e [ 1.514289] microcode: CPU5: new patch_level=0x0600063e [ 1.514291] microcode: CPU1: new patch_level=0x0600063e [ 1.514290] microcode: CPU0: new patch_level=0x0600063e [ 1.514296] microcode: CPU7: new patch_level=0x0600063e [ 1.514297] microcode: CPU3: new patch_level=0x0600063e [ 1.514335] microcode: Microcode Update Driver: v2.2. [ 1.514342] IPI shorthand broadcast: enabled [ 1.516047] sched_clock: Marking stable (1512014612, 3869599)->(1537843372, -21959161) [ 1.516258] registered taskstats version 1 [ 1.516385] Loading compiled-in X.509 certificates [ 1.543708] Loaded X.509 cert 'Build time autogenerated kernel key: e89427945035c8dcb005e1ccdc6183fd860e9aa0' [ 1.546552] Key type .fscrypt registered [ 1.546554] Key type fscrypt-provisioning registered [ 1.551940] Key type encrypted registered [ 1.551945] AppArmor: AppArmor sha1 policy hashing enabled [ 1.551954] ima: No TPM chip found, activating TPM-bypass! [ 1.551957] ima: Allocated hash algorithm: sha256 [ 1.551968] ima: No architecture policies found [ 1.551980] evm: Initialising EVM extended attributes: [ 1.551981] evm: security.selinux [ 1.551982] evm: security.SMACK64 (disabled) [ 1.551984] evm: security.SMACK64EXEC (disabled) [ 1.551985] evm: security.SMACK64TRANSMUTE (disabled) [ 1.551985] evm: security.SMACK64MMAP (disabled) [ 1.551986] evm: security.apparmor [ 1.551987] evm: security.ima [ 1.551988] evm: security.capability [ 1.551989] evm: HMAC attrs: 0x1 [ 1.567898] tsc: Refined TSC clocksource calibration: 3093.300 MHz [ 1.567907] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c968ef1f4e, max_idle_ns: 440795361724 ns [ 1.567969] clocksource: Switched to clocksource tsc [ 1.731640] RAS: Correctable Errors collector initialized. [ 1.731722] clk: Disabling unused clocks [ 1.733959] Freeing unused decrypted memory: 2028K [ 1.735023] Freeing unused kernel image (initmem) memory: 3964K [ 1.756057] Write protecting the kernel read-only data: 28672k [ 1.756898] Freeing unused kernel image (rodata/data gap) memory: 1744K [ 1.819949] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.819955] Run /init as init process [ 1.819956] with arguments: [ 1.819957] /init [ 1.819958] splash [ 1.819959] with environment: [ 1.819960] HOME=/ [ 1.819961] TERM=linux [ 1.819961] BOOT_IMAGE=/boot/vmlinuz-6.6.13+bpo-amd64 [ 2.095485] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.095553] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.105050] Floppy drive(s): fd0 is 1.44M [ 2.121364] cryptd: max_cpu_qlen set to 1000 [ 2.121409] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.121422] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.121440] ACPI: button: Power Button [PWRF] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.126089] FDC 0 is a post-1991 82077 [ 2.142150] SCSI subsystem initialized [ 2.155804] ACPI: bus type USB registered [ 2.155856] usbcore: registered new interface driver usbfs [ 2.155878] usbcore: registered new interface driver hub [ 2.155903] usbcore: registered new device driver usb [ 2.193538] ACPI: bus type drm_connector registered [ 2.206590] AVX version of gcm_enc/dec engaged. [ 2.206647] AES CTR mode by8 optimization enabled [ 2.211631] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.211843] libata version 3.00 loaded. [ 2.211998] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.212004] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.212008] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.223444] pata_via 0000:05:00.1: version 0.3.4 [ 2.223546] scsi host0: pata_atiixp [ 2.223805] scsi host1: pata_atiixp [ 2.223867] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.223875] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.224454] QUIRK: Enable AMD PLL fix [ 2.224480] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.224487] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.224492] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.224499] ehci-pci 0000:00:12.2: debug port 1 [ 2.224536] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.224812] scsi host2: pata_via [ 2.224994] scsi host3: pata_via [ 2.225056] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 [ 2.225059] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 [ 2.239961] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.240030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.240034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.240036] usb usb1: Product: EHCI Host Controller [ 2.240038] usb usb1: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.240039] usb usb1: SerialNumber: ... [ 2.240224] hub 1-0:1.0: USB hub found [ 2.240234] hub 1-0:1.0: 5 ports detected [ 2.240478] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.240486] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.240491] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.240499] ehci-pci 0000:00:13.2: debug port 1 [ 2.240534] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.259910] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.259974] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.259977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.259980] usb usb2: Product: EHCI Host Controller [ 2.259981] usb usb2: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.259983] usb usb2: SerialNumber: ... [ 2.260154] hub 2-0:1.0: USB hub found [ 2.260162] hub 2-0:1.0: 5 ports detected [ 2.260395] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.260401] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.260406] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.260414] ehci-pci 0000:00:16.2: debug port 1 [ 2.260454] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.275981] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.276147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.276151] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.276156] usb usb3: Product: EHCI Host Controller [ 2.276157] usb usb3: Manufacturer: Linux 6.6.13+bpo-amd64 ehci_hcd [ 2.276159] usb usb3: SerialNumber: ... [ 2.276314] hub 3-0:1.0: USB hub found [ 2.276322] hub 3-0:1.0: 4 ports detected [ 2.396653] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.396658] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.396664] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.396668] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.396669] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.402741] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.403795] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.535977] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.607145] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.607154] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.607223] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.607451] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.607460] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.607465] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.607524] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.607528] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.607531] usb usb4: Product: xHCI Host Controller [ 2.607533] usb usb4: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.607535] usb usb4: SerialNumber: ... [ 2.607792] hub 4-0:1.0: USB hub found [ 2.607805] hub 4-0:1.0: 2 ports detected [ 2.608017] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.608050] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.608054] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.608057] usb usb5: Product: xHCI Host Controller [ 2.608059] usb usb5: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.608061] usb usb5: SerialNumber: ... [ 2.608329] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.608377] hub 5-0:1.0: USB hub found [ 2.608391] hub 5-0:1.0: 2 ports detected [ 2.611924] ahci 0000:00:11.0: version 3.0 [ 2.612130] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.612135] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.612868] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.612910] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.612979] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.612986] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.613049] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.613226] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.613230] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.613234] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.613288] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.613292] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.613295] usb usb7: Product: xHCI Host Controller [ 2.613297] usb usb7: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.613299] usb usb7: SerialNumber: ... [ 2.613412] scsi host4: ahci [ 2.613579] hub 7-0:1.0: USB hub found [ 2.613591] hub 7-0:1.0: 2 ports detected [ 2.613743] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.613789] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.613792] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.613794] usb usb8: Product: xHCI Host Controller [ 2.613796] usb usb8: Manufacturer: Linux 6.6.13+bpo-amd64 xhci-hcd [ 2.613798] usb usb8: SerialNumber: ... [ 2.613925] scsi host5: ahci [ 2.614133] scsi host6: ahci [ 2.614234] hub 8-0:1.0: USB hub found [ 2.614245] hub 8-0:1.0: 2 ports detected [ 2.614394] scsi host7: ahci [ 2.614493] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.614497] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.614500] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.614503] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.614732] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.614737] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.615184] scsi host8: ahci [ 2.615536] scsi host9: ahci [ 2.615630] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 [ 2.615637] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 [ 2.676003] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.676008] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.676010] usb usb6: Product: OHCI PCI host controller [ 2.676012] usb usb6: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.676014] usb usb6: SerialNumber: ... [ 2.676243] hub 6-0:1.0: USB hub found [ 2.676252] hub 6-0:1.0: 5 ports detected [ 2.676652] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.676666] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.676690] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.692803] usb 3-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.692808] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.692811] usb 3-1: Product: 802.11n NIC [ 2.692812] usb 3-1: Manufacturer: Realtek [ 2.692814] usb 3-1: SerialNumber: ... [ 2.720169] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.744069] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.744074] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.744077] usb usb9: Product: OHCI PCI host controller [ 2.744079] usb usb9: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.744080] usb usb9: SerialNumber: ... [ 2.744370] hub 9-0:1.0: USB hub found [ 2.744396] hub 9-0:1.0: 5 ports detected [ 2.744972] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.744978] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.744999] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.817999] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.818003] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.818005] usb usb10: Product: OHCI PCI host controller [ 2.818006] usb usb10: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.818007] usb usb10: SerialNumber: ... [ 2.818275] hub 10-0:1.0: USB hub found [ 2.818283] hub 10-0:1.0: 2 ports detected [ 2.818740] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.818746] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.818774] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.886073] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06 [ 2.886078] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.886080] usb usb11: Product: OHCI PCI host controller [ 2.886082] usb usb11: Manufacturer: Linux 6.6.13+bpo-amd64 ohci_hcd [ 2.886083] usb usb11: SerialNumber: ... [ 2.886373] hub 11-0:1.0: USB hub found [ 2.886383] hub 11-0:1.0: 4 ports detected [ 2.927791] ata7: SATA link down (SStatus 0 SControl 300) [ 2.931657] ata10: SATA link down (SStatus 0 SControl 330) [ 2.948055] usb 6-1: new low-speed USB device number 2 using ohci-pci [ 3.039975] usb 9-2: new full-speed USB device number 2 using ohci-pci [ 3.087997] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.088030] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.088058] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.088232] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 3.088285] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.088390] ata6.00: configured for UDMA/133 [ 3.089443] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 3.089923] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.089993] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.090845] ata8.00: configured for UDMA/133 [ 3.091605] ata5.00: configured for UDMA/133 [ 3.091775] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.091892] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.092210] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 3.093014] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.093297] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.094669] ata9.00: configured for UDMA/133 [ 3.095587] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.126274] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.206928] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.206934] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.206964] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.240041] usb 9-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.240046] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.240049] usb 9-2: Product: A4Tech Gaming Mouse [ 3.240051] usb 9-2: Manufacturer: PixArt [ 3.256463] sd 0:0:0:0: [sda] Write Protect is off [ 3.256467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.256485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.256509] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.256802] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.257041] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.257053] sd 5:0:0:0: [sdc] Write Protect is off [ 3.257053] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.257056] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.257058] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.257074] sd 4:0:0:0: [sdb] Write Protect is off [ 3.257074] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.257078] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.257100] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.257107] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.257141] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.257791] sda: sda1 sda2 sda3 [ 3.257845] sdc: sdc1 sdc2 [ 3.258016] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.258018] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.262281] hid: raw HID events driver (C) Jiri Kosina [ 3.312242] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.350351] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.350542] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.350547] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.350573] sd 8:0:0:0: [sdd] Write Protect is off [ 3.350577] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.350613] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.350639] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.368162] sdd: sdd1 sdd2 [ 3.368376] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 4.103014] sdb: sdb1 sdb2 sdb3 [ 4.103318] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.120262] usbcore: registered new interface driver usbhid [ 4.120267] usbhid: USB HID core driver [ 4.127199] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:09DA:3519.0001/input/input2 [ 4.127316] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 4.127666] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.1/0003:09DA:3519.0002/input/input4 [ 4.167962] usb 1-5: new high-speed USB device number 4 using ehci-pci [ 4.184117] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 4.324356] usb 1-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 4.324363] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.324655] hub 1-5:1.0: USB hub found [ 4.324727] hub 1-5:1.0: 2 ports detected [ 4.521131] usb 6-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.521137] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.521140] usb 6-1: Product: NOVA AVR [ 4.521142] usb 6-1: Manufacturer: MGE UPS SYSTEMS [ 4.616006] usb 1-5.1: new high-speed USB device number 5 using ehci-pci [ 4.940637] usb 1-5.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 4.940643] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.940646] usb 1-5.1: SerialNumber: ... [ 5.019985] usb 1-5.2: new high-speed USB device number 6 using ehci-pci [ 5.344636] usb 1-5.2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 5.344641] usb 1-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 5.344644] usb 1-5.2: SerialNumber: ... [ 7.056040] hid-generic 0003:0463:FFFF.0003: hiddev1,hidraw2: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:12.0-1/input0 [ 7.253508] [drm] amdgpu kernel modesetting enabled. [ 7.253646] amdgpu: Virtual CRAT table created for CPU [ 7.253664] amdgpu: Topology: Add CPU node [ 7.258036] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.258052] [drm] register mmio base: 0xFEA00000 [ 7.258053] [drm] register mmio size: 262144 [ 7.258173] [drm] add ip block number 0 <vi_common> [ 7.258174] [drm] add ip block number 1 <gmc_v8_0> [ 7.258175] [drm] add ip block number 2 <tonga_ih> [ 7.258176] [drm] add ip block number 3 <gfx_v8_0> [ 7.258177] [drm] add ip block number 4 <sdma_v3_0> [ 7.258178] [drm] add ip block number 5 <powerplay> [ 7.258179] [drm] add ip block number 6 <dm> [ 7.258180] [drm] add ip block number 7 <uvd_v6_0> [ 7.258181] [drm] add ip block number 8 <vce_v3_0> [ 7.258361] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 7.258404] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.258407] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.258423] [drm] UVD is enabled in VM mode [ 7.258424] [drm] UVD ENC is enabled in VM mode [ 7.258426] [drm] VCE enabled in VM mode [ 7.258454] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.259535] Console: switching to colour dummy device 80x25 [ 7.259540] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.259543] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.259577] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.259630] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 7.259964] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.259968] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.259974] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.259976] [drm] RAM width 256bits GDDR5 [ 7.260111] [drm] amdgpu: 8192M of VRAM memory ready [ 7.260113] [drm] amdgpu: 11998M of GTT memory ready. [ 7.260133] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.260509] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.260651] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 7.260837] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 7.261017] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 7.261104] [drm] Chained IB support enabled! [ 7.261131] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 7.261455] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 7.263547] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 7.266396] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 7.266523] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 7.266646] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.266820] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 7.269898] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.271014] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 7.272388] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.273526] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 7.584021] [drm] Display Core v3.2.247 initialized on DCE 11.2 [ 7.645416] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 7.646382] [drm] UVD and UVD ENC initialized successfully. [ 7.756301] [drm] VCE initialized successfully. [ 7.756944] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.756958] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.760982] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.761780] [drm] Initialized amdgpu 3.54.0 20150101 for 0000:01:00.0 on minor 0 [ 7.776182] fbcon: amdgpudrmfb (fb0) is primary device [ 7.856704] Console: switching to colour frame buffer device 160x64 [ 7.874744] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 7.923250] usb 6-2: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 7.923263] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.923269] usb 6-2: Product: USB Device [ 7.923273] usb 6-2: Manufacturer: COMPANY [ 7.929634] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:FAA8.0004/input/input5 [ 7.988360] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input0 [ 7.991573] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:FAA8.0005/input/input6 [ 7.991755] hid-generic 0003:09DA:FAA8.0005: input,hidraw4: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-2/input1 [ 7.995558] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.2/0003:09DA:FAA8.0006/input/input7 [ 8.052092] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.2/0003:09DA:FAA8.0006/input/input8 [ 8.052328] hid-generic 0003:09DA:FAA8.0006: input,hiddev2,hidraw5: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input2 [ 8.211951] raid6: sse2x4 gen() 12203 MB/s [ 8.279888] raid6: sse2x2 gen() 11410 MB/s [ 8.347948] raid6: sse2x1 gen() 7750 MB/s [ 8.347950] raid6: using algorithm sse2x4 gen() 12203 MB/s [ 8.415889] raid6: .... xor() 4537 MB/s, rmw enabled [ 8.415891] raid6: using ssse3x2 recovery algorithm [ 8.421734] xor: automatically using best checksumming function avx [ 8.427561] async_tx: api initialized (async) [ 9.267953] random: crng init done [ 9.560703] Btrfs loaded, zoned=yes, fsverity=yes [ 22.356897] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 22.356913] floppy: error 10 while reading block 0 [ 22.682678] EXT4-fs (sda1): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 22.796969] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.675201] loop: module loaded [ 23.704398] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 23.704455] device-mapper: uevent: version 1.0.3 [ 23.704500] EXT4-fs (sda1): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. Quota mode: none. [ 23.704606] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 23.758702] lp: driver loaded but no devices found [ 23.769127] ppdev: user-space parallel port driver [ 23.932456] Asymmetric key parser 'pkcs8' registered [ 24.202933] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 24.210055] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.210108] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 24.210227] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 24.210618] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 24.212294] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 24.218442] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 24.218890] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 24.221765] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 24.224637] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.233887] acpi_cpufreq: overriding BIOS provided _PSD data [ 24.235778] mc: Linux media interface: v0.10 [ 24.907860] kvm_amd: TSC scaling supported [ 24.907865] kvm_amd: Nested Virtualization enabled [ 24.907867] kvm_amd: Nested Paging enabled [ 24.907879] kvm_amd: LBR virtualization supported [ 24.947493] MCE: In-kernel MCE decoding enabled. [ 24.949729] videodev: Linux video capture interface: v2.00 [ 25.095575] usb 1-5.1: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.110542] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 25.116763] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 25.116769] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 0 [ 25.131520] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 25.155892] Registered IR keymap rc-avermedia-m135a [ 25.156024] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 25.161045] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 25.161706] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 25.163893] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 25.163973] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 25.164049] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 25.164154] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 25.170154] IR NEC protocol handler initialized [ 25.198327] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.198336] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.198339] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.198342] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 25.198344] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 25.198346] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 25.198348] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 25.198351] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 25.198353] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 25.199984] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.200036] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.200105] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.208735] usb 1-5.2: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.215073] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 25.215177] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 25.215269] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 25.215348] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 25.215441] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 25.215533] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 25.215633] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 25.215712] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 25.234268] alsactl[984]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 25.271629] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.286647] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 25.286943] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 25.287221] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.287503] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 25.297974] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 25.298811] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 25.320792] usbcore: registered new interface driver uvcvideo [ 25.371980] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 25.371992] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 25.371996] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 25.371999] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372001] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 25.372004] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372006] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372009] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372011] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372014] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372017] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372019] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372022] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372025] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372027] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.372036] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.439896] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 25.559982] tda829x 13-004b: setting tuner address to 60 [ 25.664678] usb 3-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 25.664693] usb 3-1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 25.664699] usb 3-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 25.670771] usb 3-1: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 25.671124] usb 3-1: Firmware revision 11.1 (signature 0x88e1) [ 25.675976] tda829x 13-004b: type set to tda8290+75a [ 26.261860] usbcore: registered new interface driver rtl8xxxu [ 26.275123] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 [ 26.583989] usb 1-5.1: set resolution quirk: cval->res = 384 [ 27.963983] usb 1-5.2: set resolution quirk: cval->res = 384 [ 27.964988] usbcore: registered new interface driver snd-usb-audio [ 29.964683] saa7134: saa7133[0]: registered device video4 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 29.964994] saa7134: saa7133[0]: registered device radio0 [ 29.987986] rc rc0: two consecutive events of type space [ 30.002266] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 30.002338] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 34.831654] Process accounting resumed [ 34.969625] NET: Registered PF_ALG protocol family [ 35.042765] alg: No test for hmac(md4) (hmac(md4-generic)) [ 35.146445] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 35.696717] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 (while UP) [ 36.302994] vboxdrv: loading out-of-tree module taints kernel. [ 36.303001] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 36.339282] vboxdrv: Found 8 processor cores/threads [ 36.356109] vboxdrv: TSC mode is Invariant, tentative frequency 3093300227 Hz [ 36.356115] vboxdrv: Successfully loaded version 7.0.18 r162988 (interface 0x00330004) [ 36.572492] VBoxNetFlt: Successfully started. [ 36.580705] VBoxNetAdp: Successfully started. [ 36.596124] NET: Registered PF_QIPCRTR protocol family [ 37.748936] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 [ 37.754264] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 37.756015] wlxd037459855f3: authenticated [ 37.763922] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 37.770021] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=5) [ 37.771750] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 37.774001] wlxd037459855f3: associated [ 37.851649] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 40.516069] usb 1-5.1: reset high-speed USB device number 5 using ehci-pci [ 41.076007] usb 1-5.2: reset high-speed USB device number 6 using ehci-pci