[ 0.000000] microcode: updated early: 0x1a -> 0x28, date = 2019-11-12 [ 0.000000] Linux version 6.4.11-zen2-1-zen (XXX@XXX) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 ZEN SMP PREEMPT_DYNAMIC Sat, 19 Aug 2023 15:38:10 +0000 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=HASH_FD6-C320-E37C-B81A-954728FB9043 rw rootflags=subvol=@ loglevel=3 nowatchdog nvme_load=YES [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000050000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c655bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c655c000-0x00000000c6562fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c6563000-0x00000000c69a7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c69a8000-0x00000000c6d5efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c6d5f000-0x00000000d96fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d96ff000-0x00000000d98f4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d98f5000-0x00000000d9914fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9915000-0x00000000d9a06fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d9a07000-0x00000000d9f7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9f80000-0x00000000d9ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.3.1 by American Megatrends [ 0.000000] efi: ACPI=0xd98fb000 ACPI 2.0=0xd98fb000 SMBIOS=0xd9f7e498 [ 0.000000] efi: Remove mem138: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem139: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem140: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map [ 0.000000] efi: Not removing mem141: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.000000] efi: Not removing mem142: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem143: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteDesk 800 G1 TWR/18E4, BIOS L01 v02.71 05/09/2017 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3591.893 MHz processor [ 0.000658] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000660] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000668] last_pfn = 0x81fe00 max_arch_pfn = 0x400000000 [ 0.000674] total RAM covered: 32702M [ 0.000791] Found optimal setting for mtrr clean up [ 0.000791] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G [ 0.000794] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001095] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved [ 0.001098] last_pfn = 0xda000 max_arch_pfn = 0x400000000 [ 0.004195] found SMP MP-table at [mem 0x000f4d40-0x000f4d4f] Using GB pages for direct mapping [ 0.004658] Secure boot disabled [ 0.004659] RAMDISK: [mem 0x35edb000-0x36f64fff] ACPI: Early table checksum verification disabled [ 0.004665] ACPI: RSDP 0x00000000D98FB000 000024 (v02 HPQOEM) [ 0.004668] ACPI: XSDT 0x00000000D98FB090 00009C (v01 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004673] ACPI: FACP 0x00000000D9909000 00010C (v05 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004677] ACPI: DSDT 0x00000000D98FB1B8 00DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112) [ 0.004680] ACPI: FACS 0x00000000D9A05080 000040 [ 0.004682] ACPI: APIC 0x00000000D9909110 000092 (v03 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004684] ACPI: FPDT 0x00000000D99091A8 000044 (v01 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004686] ACPI: SSDT 0x00000000D99091F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.004689] ACPI: SSDT 0x00000000D9909730 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.004691] ACPI: SSDT 0x00000000D990A208 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ 0.004694] ACPI: MCFG 0x00000000D990A3D0 00003C (v01 HPQOEM SLIC-BPC 20170509 MSFT 00000097) [ 0.004696] ACPI: HPET 0x00000000D990A410 000038 (v01 HPQOEM SLIC-BPC 20170509 AMI. 00000005) [ 0.004698] ACPI: SSDT 0x00000000D990A448 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.004701] ACPI: SSDT 0x00000000D990A7B8 00348C (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.004703] ACPI: SSDT 0x00000000D990DC48 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.004705] ACPI: SLIC 0x00000000D99142D8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.004708] ACPI: ASF! 0x00000000D9914450 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.004710] ACPI: TCPA 0x00000000D99144F8 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.004712] ACPI: DMAR 0x00000000D9914530 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.004714] ACPI: Reserving FACP table memory at [mem 0xd9909000-0xd990910b] ACPI: Reserving DSDT table memory at [mem 0xd98fb1b8-0xd9908ffd] ACPI: Reserving FACS table memory at [mem 0xd9a05080-0xd9a050bf] ACPI: Reserving APIC table memory at [mem 0xd9909110-0xd99091a1] ACPI: Reserving FPDT table memory at [mem 0xd99091a8-0xd99091eb] ACPI: Reserving SSDT table memory at [mem 0xd99091f0-0xd9909728] ACPI: Reserving SSDT table memory at [mem 0xd9909730-0xd990a207] ACPI: Reserving SSDT table memory at [mem 0xd990a208-0xd990a3ce] ACPI: Reserving MCFG table memory at [mem 0xd990a3d0-0xd990a40b] ACPI: Reserving HPET table memory at [mem 0xd990a410-0xd990a447] ACPI: Reserving SSDT table memory at [mem 0xd990a448-0xd990a7b4] ACPI: Reserving SSDT table memory at [mem 0xd990a7b8-0xd990dc43] ACPI: Reserving SSDT table memory at [mem 0xd990dc48-0xd99142d6] ACPI: Reserving SLIC table memory at [mem 0xd99142d8-0xd991444d] ACPI: Reserving ASF! table memory at [mem 0xd9914450-0xd99144f4] ACPI: Reserving TCPA table memory at [mem 0xd99144f8-0xd9914529] ACPI: Reserving DMAR table memory at [mem 0xd9914530-0xd99145e7] No NUMA configuration found [ 0.004772] Faking a node at [mem 0x0000000000000000-0x000000081fdfffff] NODE_DATA(0) allocated [mem 0x81fdfb000-0x81fdfffff] Zone ranges: [ 0.004812] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000081fdfffff] Device empty [ 0.004816] Movable zone start for each node [ 0.004817] Early memory node ranges [ 0.004817] node 0: [mem 0x0000000000001000-0x000000000004efff] node 0: [mem 0x0000000000050000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x00000000c655bfff] node 0: [mem 0x00000000c6563000-0x00000000c69a7fff] node 0: [mem 0x00000000c6d5f000-0x00000000d96fefff] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff] node 0: [mem 0x0000000100000000-0x000000081fdfffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000081fdfffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004830] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004850] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.009670] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.010139] On node 0, zone DMA32: 951 pages in unavailable ranges [ 0.010156] On node 0, zone DMA32: 2304 pages in unavailable ranges [ 0.055873] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.055880] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.055895] Reserving Intel graphics memory at [mem 0xdc200000-0xde1fffff] ACPI: PM-Timer IO Port: 0x408 [ 0.056008] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.056017] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.056020] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.056021] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.056024] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.056025] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.056029] TSC deadline timer available [ 0.056030] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.056046] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0004f000-0x0004ffff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xc655c000-0xc6562fff] PM: hibernation: Registered nosave memory: [mem 0xc69a8000-0xc6d5efff] PM: hibernation: Registered nosave memory: [mem 0xd96ff000-0xd98f4fff] PM: hibernation: Registered nosave memory: [mem 0xd98f5000-0xd9914fff] PM: hibernation: Registered nosave memory: [mem 0xd9915000-0xd9a06fff] PM: hibernation: Registered nosave memory: [mem 0xd9a07000-0xd9f7ffff] PM: hibernation: Registered nosave memory: [mem 0xd9f80000-0xd9ffefff] PM: hibernation: Registered nosave memory: [mem 0xda000000-0xdbffffff] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xde1fffff] PM: hibernation: Registered nosave memory: [mem 0xde200000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0xde200000-0xfebfffff] available for PCI devices [ 0.056067] Booting paravirtualized kernel on bare hardware [ 0.056069] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.060679] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.061006] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.061011] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.061013] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.061029] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=HASH_FD6-C320-E37C-B81A-954728FB9043 rw rootflags=subvol=@ loglevel=3 nowatchdog nvme_load=YES [ 0.061098] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-zen nvme_load=YES", will be passed to user space. [ 0.061123] random: crng init done [ 0.064280] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.065925] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.066013] Fallback order for Node 0: 0 [ 0.066016] Built 1 zonelists, mobility grouping on. Total pages: 8229356 [ 0.066017] Policy zone: Normal [ 0.066236] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.066244] software IO TLB: area num 8. [ 0.149612] Memory: 32489876K/33440632K available (18432K kernel code, 2140K rwdata, 12632K rodata, 3536K init, 3644K bss, 950496K reserved, 0K cma-reserved) [ 0.149721] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.149731] Kernel/User page tables isolation: enabled [ 0.149760] ftrace: allocating 45279 entries in 177 pages [ 0.156618] ftrace: allocated 177 pages with 4 groups [ 0.156681] Dynamic Preempt: full [ 0.156708] rcu: Preemptible hierarchical RCU implementation. [ 0.156709] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.156710] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.156711] Trampoline variant of Tasks RCU enabled. [ 0.156711] Rude variant of Tasks RCU enabled. [ 0.156711] Tracing variant of Tasks RCU enabled. [ 0.156712] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.156712] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.158909] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.159080] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.159181] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.159206] Console: colour dummy device 80x25 [ 0.159208] printk: console [tty0] enabled [ 0.159241] ACPI: Core revision 20230331 [ 0.159337] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.159350] APIC: Switch to symmetric I/O mode setup [ 0.159352] DMAR: Host address width 39 [ 0.159353] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.159356] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.159358] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.159361] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.159362] DMAR: RMRR base: 0x000000d988b000 end: 0x000000d9897fff [ 0.159364] DMAR: RMRR base: 0x000000dc000000 end: 0x000000de1fffff [ 0.159366] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.159367] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.159368] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.159823] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.159825] x2apic enabled [ 0.159830] Switched APIC routing to cluster x2apic. [ 0.160241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.164351] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c668f4de6, max_idle_ns: 440795232695 ns [ 0.164355] Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.78 BogoMIPS (lpj=3591893) [ 0.164375] CPU0: Thermal monitoring enabled (TM1) [ 0.164400] process: using mwait in idle threads [ 0.164402] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.164404] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.164406] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.164408] Spectre V2 : Mitigation: Retpolines [ 0.164408] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.164409] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.164410] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.164411] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.164412] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.164413] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.164415] MDS: Mitigation: Clear CPU buffers [ 0.164416] MMIO Stale Data: Unknown: No mitigations [ 0.164417] SRBDS: Mitigation: Microcode [ 0.164421] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.164422] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.164422] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.164424] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.164425] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.178718] Freeing SMP alternatives memory: 48K [ 0.178721] pid_max: default: 32768 minimum: 301 [ 0.183072] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity [ 0.183083] landlock: Up and running. [ 0.183084] Yama: becoming mindful. [ 0.183089] LSM support for eBPF active [ 0.183127] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183153] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183407] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.183523] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183524] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183540] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183540] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183549] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183550] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183559] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.183591] ... version: 3 [ 0.183591] ... bit width: 48 [ 0.183592] ... generic registers: 4 [ 0.183592] ... value mask: 0000ffffffffffff [ 0.183593] ... max period: 00007fffffffffff [ 0.183594] ... fixed-purpose events: 3 [ 0.183594] ... event mask: 000000070000000f [ 0.183685] signal: max sigframe size: 1776 [ 0.183699] Estimated ratio of average max frequency by base frequency (times 1024): 1080 [ 0.183719] rcu: Hierarchical SRCU implementation. [ 0.183720] rcu: Max phase no-delay instances is 400. [ 0.184211] smp: Bringing up secondary CPUs ... [ 0.184282] x86: Booting SMP configuration: [ 0.184283] .... node #0, CPUs: #1 #2 #3 #4 [ 0.189865] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.189865] #5 #6 #7 [ 0.191504] smp: Brought up 1 node, 8 CPUs [ 0.191504] smpboot: Max logical packages: 1 [ 0.191504] smpboot: Total of 8 processors activated (57470.28 BogoMIPS) [ 0.193390] devtmpfs: initialized [ 0.193391] x86/mm: Memory block size: 128MB [ 0.194921] ACPI: PM: Registering ACPI NVS region [mem 0xc655c000-0xc6562fff] (28672 bytes) [ 0.194921] ACPI: PM: Registering ACPI NVS region [mem 0xd9915000-0xd9a06fff] (991232 bytes) [ 0.194921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.194921] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.194921] pinctrl core: initialized pinctrl subsystem [ 0.194921] PM: RTC time: 01:12:22, date: 2023-08-23 [ 0.195485] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.195739] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.195933] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.196124] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.196143] thermal_sys: Registered thermal governor 'fair_share' [ 0.196143] thermal_sys: Registered thermal governor 'bang_bang' [ 0.196143] thermal_sys: Registered thermal governor 'step_wise' [ 0.196143] thermal_sys: Registered thermal governor 'user_space' [ 0.196143] thermal_sys: Registered thermal governor 'power_allocator' [ 0.196143] cpuidle: using governor ladder [ 0.196143] cpuidle: using governor menu [ 0.196143] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.196143] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.196143] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.196143] PCI: not using MMCONFIG [ 0.196143] PCI: Using configuration type 1 for base access [ 0.196373] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.196498] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.196503] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.198475] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.198477] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.198479] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.198480] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.198610] ACPI: Added _OSI(Module Device) [ 0.198610] ACPI: Added _OSI(Processor Device) [ 0.198610] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.198610] ACPI: Added _OSI(Processor Aggregator Device) [ 0.206513] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.207396] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.208850] ACPI: Dynamic OEM Table Load: [ 0.208850] ACPI: SSDT 0xFFFF9F47C19D9C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.208850] ACPI: Dynamic OEM Table Load: [ 0.208850] ACPI: SSDT 0xFFFF9F47C19F5800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.209443] ACPI: Dynamic OEM Table Load: [ 0.209446] ACPI: SSDT 0xFFFF9F47C18D5C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.211126] ACPI: Interpreter enabled [ 0.211147] ACPI: PM: (supports S0 S3 S4 S5) [ 0.211148] ACPI: Using IOAPIC for interrupt routing [ 0.211648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.212148] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.212156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.212157] PCI: Using E820 reservations for host bridge windows [ 0.212353] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.221887] ACPI: \_TZ_.FN00: New power resource [ 0.221921] ACPI: \_TZ_.FN01: New power resource [ 0.221953] ACPI: \_TZ_.FN02: New power resource [ 0.221985] ACPI: \_TZ_.FN03: New power resource [ 0.222016] ACPI: \_TZ_.FN04: New power resource [ 0.222650] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.222655] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.223497] PCI host bridge to bus 0000:00 [ 0.223498] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.223569] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.223598] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.223846] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.223852] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.223870] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.223942] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.224032] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.224155] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.224170] pci 0000:00:16.0: reg 0x10: [mem 0xf7e40000-0xf7e4000f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.224264] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.224274] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3e000-0xf7e3efff] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.224376] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.224495] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.224509] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.224640] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.224652] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.224767] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.224831] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.225064] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.225129] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.225365] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.225430] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.225661] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.225725] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.225960] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.225974] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.226113] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.226265] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.226275] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.226390] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.226404] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:01.0: PCI bridge to [bus 01] acpiphp: Slot [1] registered [ 0.226550] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [14f1:8880] type 00 class 0x040000 [ 0.226653] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit] pci 0000:03:00.0: supports D1 D2 [ 0.226830] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229370] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf79fffff] pci 0000:04:00.0: [1b21:1182] type 01 class 0x060400 [ 0.229489] pci 0000:04:00.0: enabling Extended Tags [ 0.229555] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.229682] pci 0000:00:1c.3: PCI bridge to [bus 04-07] pci 0000:00:1c.3: bridge window [io 0xd000-0xefff] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff] pci 0000:05:03.0: [1b21:1182] type 01 class 0x060400 [ 0.229801] pci 0000:05:03.0: enabling Extended Tags [ 0.229863] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold [ 0.229959] pci 0000:05:07.0: [1b21:1182] type 01 class 0x060400 [ 0.230013] pci 0000:05:07.0: enabling Extended Tags [ 0.230075] pci 0000:05:07.0: PME# supported from D0 D3hot D3cold [ 0.230176] pci 0000:04:00.0: PCI bridge to [bus 05-07] pci 0000:04:00.0: bridge window [io 0xd000-0xefff] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7dfffff] pci 0000:06:00.0: [10ec:8125] type 00 class 0x020000 [ 0.230281] pci 0000:06:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:06:00.0: reg 0x18: [mem 0xf7d10000-0xf7d1ffff 64bit] pci 0000:06:00.0: reg 0x20: [mem 0xf7d20000-0xf7d23fff 64bit] pci 0000:06:00.0: reg 0x30: [mem 0xf7d00000-0xf7d0ffff pref] pci 0000:06:00.0: supports D1 D2 [ 0.230512] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.230825] pci 0000:05:03.0: PCI bridge to [bus 06] pci 0000:05:03.0: bridge window [io 0xe000-0xefff] pci 0000:05:03.0: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:07:00.0: [10ec:8125] type 00 class 0x020000 [ 0.231081] pci 0000:07:00.0: reg 0x10: [io 0xd000-0xd0ff] pci 0000:07:00.0: reg 0x18: [mem 0xf7c10000-0xf7c1ffff 64bit] pci 0000:07:00.0: reg 0x20: [mem 0xf7c20000-0xf7c23fff 64bit] pci 0000:07:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref] pci 0000:07:00.0: supports D1 D2 [ 0.231307] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.231617] pci 0000:05:07.0: PCI bridge to [bus 07] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] pci 0000:05:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:08:00.0: [1b21:2812] type 01 class 0x060400 [ 0.231756] pci 0000:08:00.0: enabling Extended Tags [ 0.231829] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.231898] pci 0000:08:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.231995] pci 0000:00:1c.4: PCI bridge to [bus 08-0b] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7bfffff] pci 0000:09:00.0: [1b21:2812] type 01 class 0x060400 [ 0.232104] pci 0000:09:00.0: enabling Extended Tags [ 0.232177] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.232331] pci 0000:09:08.0: [1b21:2812] type 01 class 0x060400 [ 0.232385] pci 0000:09:08.0: enabling Extended Tags [ 0.232458] pci 0000:09:08.0: PME# supported from D0 D3hot D3cold [ 0.232606] pci 0000:08:00.0: PCI bridge to [bus 09-0b] pci 0000:08:00.0: bridge window [mem 0xf7a00000-0xf7bfffff] pci 0000:0a:00.0: [15b7:5009] type 00 class 0x010802 [ 0.232702] pci 0000:0a:00.0: reg 0x10: [mem 0xf7b00000-0xf7b03fff 64bit] pci 0000:0a:00.0: reg 0x20: [mem 0xf7b04000-0xf7b040ff 64bit] pci 0000:0a:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.233042] pci 0000:09:00.0: PCI bridge to [bus 0a] pci 0000:09:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] pci 0000:0b:00.0: [c0a9:540a] type 00 class 0x010802 [ 0.233137] pci 0000:0b:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit] pci 0000:0b:00.0: enabling Extended Tags [ 0.233390] pci 0000:0b:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.233473] pci 0000:09:08.0: PCI bridge to [bus 0b] pci 0000:09:08.0: bridge window [mem 0xf7a00000-0xf7afffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.234315] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.234353] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.234391] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.234428] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 0.234464] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.234465] ACPI: PCI: Interrupt link LNKF disabled [ 0.234501] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.234537] ACPI: PCI: Interrupt link LNKH configured for IRQ 5 [ 0.235787] iommu: Default domain type: Translated [ 0.235787] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.235787] SCSI subsystem initialized [ 0.235787] libata version 3.00 loaded. [ 0.235787] ACPI: bus type USB registered [ 0.235787] usbcore: registered new interface driver usbfs [ 0.235787] usbcore: registered new interface driver hub [ 0.235787] usbcore: registered new device driver usb [ 0.235787] pps_core: LinuxPPS API ver. 1 registered [ 0.235787] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.235787] PTP clock support registered [ 0.235787] EDAC MC: Ver: 3.0.0 [ 0.235787] efivars: Registered efivars operations [ 0.236375] NetLabel: Initializing [ 0.236376] NetLabel: domain hash size = 128 [ 0.236377] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.236388] NetLabel: unlabeled traffic allowed by default [ 0.236391] mctp: management component transport protocol core [ 0.236391] NET: Registered PF_MCTP protocol family [ 0.236394] PCI: Using ACPI for IRQ routing [ 0.237435] PCI: pci_cache_line_size set to 64 bytes [ 0.237502] e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0xc655c000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc69a8000-0xc7ffffff] e820: reserve RAM buffer [mem 0xd96ff000-0xdbffffff] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff] e820: reserve RAM buffer [mem 0x81fe00000-0x81fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.237538] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.237538] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.237538] vgaarb: loaded [ 0.238540] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.238546] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.240397] clocksource: Switched to clocksource tsc-early [ 0.250471] VFS: Disk quotas dquot_6.6.0 [ 0.250480] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.250544] pnp: PnP ACPI init [ 0.250621] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.250704] pnp 00:01: can't evaluate _CRS: 12311 [ 0.250777] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.250882] system 00:04: [io 0x0a20-0x0a3f] has been reserved [ 0.250884] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 0.250970] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.251109] pnp 00:08: [dma 0 disabled] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.251643] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.251645] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.251646] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.251648] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.251649] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.251650] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.251651] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.251653] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 0.251654] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.251655] system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.251656] system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.251866] pnp: PnP ACPI: found 11 devices [ 0.257322] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.257365] NET: Registered PF_INET protocol family [ 0.257476] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.259856] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.259886] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.259982] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.260213] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.260412] TCP: Hash tables configured (established 262144 bind 65536) [ 0.260498] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.260562] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.260622] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.260683] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.260688] NET: Registered PF_XDP protocol family [ 0.260695] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.260698] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.260700] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.260709] pci 0000:00:1c.0: BAR 14: assigned [mem 0xde200000-0xde3fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xde400000-0xde5fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xde200000-0xde3fffff] pci 0000:00:1c.0: bridge window [mem 0xde400000-0xde5fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf79fffff] pci 0000:05:03.0: PCI bridge to [bus 06] pci 0000:05:03.0: bridge window [io 0xe000-0xefff] pci 0000:05:03.0: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:05:07.0: PCI bridge to [bus 07] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] pci 0000:05:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:04:00.0: PCI bridge to [bus 05-07] pci 0000:04:00.0: bridge window [io 0xd000-0xefff] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7dfffff] pci 0000:00:1c.3: PCI bridge to [bus 04-07] pci 0000:00:1c.3: bridge window [io 0xd000-0xefff] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff] pci 0000:09:00.0: PCI bridge to [bus 0a] pci 0000:09:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] pci 0000:09:08.0: PCI bridge to [bus 0b] pci 0000:09:08.0: bridge window [mem 0xf7a00000-0xf7afffff] pci 0000:08:00.0: PCI bridge to [bus 09-0b] pci 0000:08:00.0: bridge window [mem 0xf7a00000-0xf7bfffff] pci 0000:00:1c.4: PCI bridge to [bus 08-0b] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7bfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xde200000-0xfeafffff window] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xde200000-0xde3fffff] pci_bus 0000:02: resource 2 [mem 0xde400000-0xde5fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf79fffff] pci_bus 0000:04: resource 0 [io 0xd000-0xefff] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7dfffff] pci_bus 0000:05: resource 0 [io 0xd000-0xefff] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7dfffff] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff] pci_bus 0000:08: resource 1 [mem 0xf7a00000-0xf7bfffff] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7bfffff] pci_bus 0000:0a: resource 1 [mem 0xf7b00000-0xf7bfffff] pci_bus 0000:0b: resource 1 [mem 0xf7a00000-0xf7afffff] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x820 took 15805 usecs [ 0.293311] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x820 took 15602 usecs [ 0.293352] PCI: CLS 64 bytes, default 64 [ 0.293367] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.293367] software IO TLB: mapped [mem 0x00000000c255c000-0x00000000c655c000] (64MB) [ 0.293397] Trying to unpack rootfs image as initramfs... [ 0.298772] Initialise system trusted keyrings [ 0.298781] Key type blacklist registered [ 0.298813] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 0.298826] zbud: loaded [ 0.298937] integrity: Platform Keyring initialized [ 0.298940] integrity: Machine keyring initialized [ 0.306693] Key type asymmetric registered [ 0.306696] Asymmetric key parser 'x509' registered [ 0.306715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.306760] io scheduler mq-deadline registered [ 0.306761] io scheduler kyber registered [ 0.306771] io scheduler bfq registered [ 0.308179] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.308608] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.309278] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.310288] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.310799] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.310976] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.310977] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.311097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.311206] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.312611] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.312773] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.312948] Non-volatile memory driver v1.3 [ 0.312950] Linux agpgart interface v0.103 [ 0.317274] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.337381] Freeing initrd memory: 16936K [ 0.345504] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.346176] ahci 0000:00:1f.2: version 3.0 [ 0.346344] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x2f impl SATA mode [ 0.346347] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.358791] scsi host0: ahci [ 0.359051] scsi host1: ahci [ 0.359297] scsi host2: ahci [ 0.359396] scsi host3: ahci [ 0.359489] scsi host4: ahci [ 0.359548] scsi host5: ahci [ 0.359571] ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 35 [ 0.359574] ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 35 [ 0.359576] ata3: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a200 irq 35 [ 0.359578] ata4: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a280 irq 35 [ 0.359579] ata5: DUMMY [ 0.359581] ata6: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a380 irq 35 [ 0.359677] ACPI: bus type drm_connector registered [ 0.360022] usbcore: registered new interface driver usbserial_generic [ 0.360029] usbserial: USB Serial support registered for generic [ 0.360087] rtc_cmos 00:02: RTC can wake from S4 [ 0.360191] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.360197] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.360212] ehci-pci 0000:00:1a.0: debug port 2 [ 0.360314] rtc_cmos 00:02: registered as rtc0 [ 0.360361] rtc_cmos 00:02: setting system clock to 2023-08-23T01:12:22 UTC (1692753142) [ 0.360380] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.360502] intel_pstate: Intel P-state driver initializing [ 0.360772] ledtrig-cpu: registered to indicate activity on CPUs [ 0.361052] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.361194] fbcon: Deferring console take-over [ 0.361195] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.361232] hid: raw HID events driver (C) Jiri Kosina [ 0.361309] drop_monitor: Initializing network drop monitor service [ 0.364140] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 0.369950] Initializing XFRM netlink socket [ 0.369979] NET: Registered PF_INET6 protocol family [ 0.370270] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.370328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 0.370340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.370341] usb usb1: Product: EHCI Host Controller [ 0.370342] usb usb1: Manufacturer: Linux 6.4.11-zen2-1-zen ehci_hcd [ 0.370343] usb usb1: SerialNumber: ... [ 0.370524] hub 1-0:1.0: USB hub found [ 0.370529] hub 1-0:1.0: 3 ports detected [ 0.370678] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.370684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.370694] ehci-pci 0000:00:1d.0: debug port 2 [ 0.374627] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 0.374692] Segment Routing with IPv6 [ 0.374694] RPL Segment Routing with IPv6 [ 0.374700] In-situ OAM (IOAM) with IPv6 [ 0.374719] NET: Registered PF_PACKET protocol family [ 0.375222] microcode: Microcode Update Driver: v2.2. [ 0.375228] IPI shorthand broadcast: enabled [ 0.376441] sched_clock: Marking stable (376000878, 245123)->(379230790, -2984789) [ 0.376607] registered taskstats version 1 [ 0.377021] Loading compiled-in X.509 certificates [ 0.378977] Loaded X.509 cert 'Build time autogenerated kernel key: 4d40984d437c74a9815bec3cbf02947bc87298db' [ 0.379752] zswap: loaded using pool zstd/zsmalloc [ 0.381029] Key type .fscrypt registered [ 0.381030] Key type fscrypt-provisioning registered [ 0.381329] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.381471] integrity: Loading X.509 certificate: UEFI:db [ 0.381474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 0.381476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.381477] usb usb2: Product: EHCI Host Controller [ 0.381478] usb usb2: Manufacturer: Linux 6.4.11-zen2-1-zen ehci_hcd [ 0.381479] usb usb2: SerialNumber: ... [ 0.381506] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.381506] integrity: Loading X.509 certificate: UEFI:db [ 0.381520] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.381520] integrity: Loading X.509 certificate: UEFI:db [ 0.381545] integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529' [ 0.381929] hub 2-0:1.0: USB hub found [ 0.381934] hub 2-0:1.0: 3 ports detected [ 0.382864] PM: Magic number: 3:13:206 [ 0.382916] acpi device:2e: hash matches [ 0.384962] RAS: Correctable Errors collector initialized. [ 0.385012] clk: Disabling unused clocks [ 0.610307] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.618306] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.670494] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.670514] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.670528] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.670540] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.670554] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.674827] ata2.00: ATA-9: Timetec MS05, U1013A0, max UDMA/133 [ 0.675484] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 0.675489] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.675891] ata3.00: ATA-8: WDC WD20EARS-42S0XB0, 12.01D04, max UDMA/133 [ 0.676599] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.676909] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.680312] ata6.00: ATA-8: WDC WD20EARS-42S0XB0, 12.01D04, max UDMA/133 [ 0.680918] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.682148] ata3.00: configured for UDMA/133 [ 0.685901] ata2.00: configured for UDMA/133 [ 0.686389] ata6.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 0.686394] ata6.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.691542] ata6.00: configured for UDMA/133 [ 0.701273] ata1.00: ATA-10: ST1000LM035-1RK172, 0001, max UDMA/133 [ 0.706040] ata4.00: ATA-8: ST500LM021-1KJ152, 0002LIM1, max UDMA/133 [ 0.706045] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 0.738712] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.738716] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.739113] hub 1-1:1.0: USB hub found [ 0.739156] hub 1-1:1.0: 6 ports detected [ 0.746744] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.746749] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.747152] hub 2-1:1.0: USB hub found [ 0.747373] hub 2-1:1.0: 8 ports detected [ 0.786038] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.818002] ata4.00: configured for UDMA/133 [ 0.835120] ata1.00: configured for UDMA/133 [ 0.835239] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 0001 PQ: 0 ANSI: 5 [ 0.835496] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.835498] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.835516] scsi 1:0:0:0: Direct-Access ATA Timetec MS05 3A0 PQ: 0 ANSI: 5 [ 0.835523] sd 0:0:0:0: [sda] Write Protect is off [ 0.835526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.835610] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.835747] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 0.836117] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 0.836126] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-42S 1D04 PQ: 0 ANSI: 5 [ 0.836129] sd 1:0:0:0: [sdb] Write Protect is off [ 0.836132] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.836152] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836171] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 0.836422] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.836426] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 0.836441] sd 2:0:0:0: [sdc] Write Protect is off [ 0.836444] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.836453] scsi 3:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5 [ 0.836466] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836489] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 0.836681] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.836684] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 0.836690] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-42S 1D04 PQ: 0 ANSI: 5 [ 0.836695] sd 3:0:0:0: [sdd] Write Protect is off [ 0.836698] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 0.836715] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836737] sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 0.836865] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.836867] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 0.836878] sd 5:0:0:0: [sde] Write Protect is off [ 0.836880] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 0.836897] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836916] sd 5:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 0.837576] sdb: sdb1 sdb2 sdb3 [ 0.837709] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.885858] sdc: sdc1 [ 0.886117] sd 2:0:0:0: [sdc] Attached SCSI disk [ 0.890448] sda: sda1 [ 0.890584] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.893400] sde: sde1 [ 0.893651] sd 5:0:0:0: [sde] Attached SCSI disk [ 0.894829] sdd: sdd1 [ 0.894982] sd 3:0:0:0: [sdd] Attached SCSI disk [ 0.896280] Freeing unused decrypted memory: 2036K [ 0.896583] Freeing unused kernel image (initmem) memory: 3536K [ 0.902345] Write protecting the kernel read-only data: 32768k [ 0.903078] Freeing unused kernel image (rodata/data gap) memory: 1704K [ 0.984675] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.984679] rodata_test: all tests were successful [ 0.984680] x86/mm: Checking user space page tables [ 1.023814] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.023818] Run /init as init process [ 1.023820] with arguments: [ 1.023821] /init [ 1.023821] with environment: [ 1.023822] HOME=/ [ 1.023822] TERM=linux [ 1.023823] BOOT_IMAGE=/vmlinuz-linux-zen [ 1.023823] nvme_load=YES [ 1.064341] fbcon: Taking over console [ 1.064942] Console: switching to colour frame buffer device 100x37 [ 1.190631] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.193359] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.193417] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.196001] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.196008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.197083] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.197295] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.197300] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.197303] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.197349] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 1.197351] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.197353] usb usb3: Product: xHCI Host Controller [ 1.197355] usb usb3: Manufacturer: Linux 6.4.11-zen2-1-zen xhci-hcd [ 1.197356] usb usb3: SerialNumber: ... [ 1.197507] hub 3-0:1.0: USB hub found [ 1.197526] hub 3-0:1.0: 15 ports detected [ 1.203139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04 [ 1.203144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.203146] usb usb4: Product: xHCI Host Controller [ 1.203147] usb usb4: Manufacturer: Linux 6.4.11-zen2-1-zen xhci-hcd [ 1.203148] usb usb4: SerialNumber: ... [ 1.203258] hub 4-0:1.0: USB hub found [ 1.203272] hub 4-0:1.0: 6 ports detected [ 1.203895] usb: port power management may be unreliable [ 1.208733] nvme nvme0: pci function 0000:0b:00.0 [ 1.208734] nvme nvme1: pci function 0000:0a:00.0 [ 1.215207] nvme nvme0: missing or invalid SUBNQN field. [ 1.218315] nvme nvme1: allocated 32 MiB host memory buffer. [ 1.219216] nvme nvme1: 8/0/0 default/read/poll queues [ 1.222912] nvme1n1: p1 [ 1.344308] tsc: Refined TSC clocksource calibration: 3591.682 MHz [ 1.344317] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a15be52, max_idle_ns: 440795280454 ns [ 1.344344] clocksource: Switched to clocksource tsc [ 1.442309] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.543985] nvme nvme0: allocated 128 MiB host memory buffer. [ 1.571073] usb 3-1: New USB device found, idVendor=291a, idProduct=b817, bcdDevice= 4.63 [ 1.571078] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.571090] usb 3-1: Product: USB2.0 Hub [ 1.571091] usb 3-1: Manufacturer: Anker [ 1.572371] hub 3-1:1.0: USB hub found [ 1.572575] hub 3-1:1.0: 5 ports detected [ 1.635378] nvme nvme0: 8/0/0 default/read/poll queues [ 1.649324] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.655033] nvme0n1: p1 [ 1.668535] raid6: skipped pq benchmark and selected avx2x4 [ 1.668537] raid6: using avx2x2 recovery algorithm [ 1.670875] xor: measuring software checksum speed [ 1.671163] prefetch64-sse : 34474 MB/sec [ 1.671513] generic_sse : 30371 MB/sec [ 1.671514] xor: using function: prefetch64-sse (34474 MB/sec) [ 1.684964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.695689] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.709889] usb 4-1: New USB device found, idVendor=291a, idProduct=a817, bcdDevice= 4.63 [ 1.709893] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.709895] usb 4-1: Product: USB3.0 Hub [ 1.709895] usb 4-1: Manufacturer: Anker [ 1.711110] hub 4-1:1.0: USB hub found [ 1.711310] hub 4-1:1.0: 4 ports detected [ 1.768702] Btrfs loaded, zoned=yes, fsverity=yes [ 1.769748] BTRFS: device fsid HASH_FD6-C320-E37C-B81A-954728FB9043 devid 1 transid 622653 /dev/nvme1n1p1 scanned by (udev-worker) (163) [ 1.770895] BTRFS: device fsid HASH_FD6-C320-E37C-B81A-954728FB9043 devid 2 transid 622653 /dev/nvme0n1p1 scanned by (udev-worker) (158) [ 1.799730] BTRFS info (device nvme1n1p1): using crc32c (crc32c-intel) checksum algorithm [ 1.799737] BTRFS info (device nvme1n1p1): using free space tree [ 1.824252] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1.952935] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56 [ 1.952953] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.952955] usb 3-2: Product: USB2.1 Hub [ 1.952956] usb 3-2: Manufacturer: GenesysLogic [ 1.953999] hub 3-2:1.0: USB hub found [ 1.954250] hub 3-2:1.0: 4 ports detected [ 1.978525] BTRFS info (device nvme1n1p1): enabling ssd optimizations [ 1.978528] BTRFS info (device nvme1n1p1): auto enabling async discard [ 2.065388] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.080284] usb 4-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56 [ 2.080287] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.080289] usb 4-2: Product: USB3.1 Hub [ 2.080290] usb 4-2: Manufacturer: GenesysLogic [ 2.082455] hub 4-2:1.0: USB hub found [ 2.082762] hub 4-2:1.0: 4 ports detected [ 2.938308] usb 3-9: new high-speed USB device number 5 using xhci_hcd [ 2.984260] device-mapper: uevent: version 1.0.3 [ 2.984378] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 3.018501] loop: module loaded [ 3.018683] fuse: init (API version 7.38) [ 3.025807] RPC: Registered named UNIX socket transport module. [ 3.025810] RPC: Registered udp transport module. [ 3.025811] RPC: Registered tcp transport module. [ 3.025812] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.034613] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.034645] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.034672] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.034689] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.034711] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 3.042107] Asymmetric key parser 'pkcs8' registered [ 3.067592] usb 3-9: New USB device found, idVendor=2001, idProduct=331e, bcdDevice= 2.10 [ 3.067596] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.067597] usb 3-9: Product: 802.11ac NIC [ 3.067598] usb 3-9: Manufacturer: Realtek [ 3.067599] usb 3-9: SerialNumber: ... [ 3.182438] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 3.202175] usb 4-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.01 [ 3.202178] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.202179] usb 4-3: Product: USB3.2 Hub [ 3.202180] usb 4-3: Manufacturer: Generic [ 3.204160] hub 4-3:1.0: USB hub found [ 3.205408] hub 4-3:1.0: 4 ports detected [ 3.220057] BTRFS info (device nvme1n1p1: state M): use zstd compression, level 3 [ 3.263317] usb 3-1.5: new high-speed USB device number 6 using xhci_hcd [ 3.279573] loop0: detected capacity change from 0 to 8 [ 3.280454] loop1: detected capacity change from 0 to 129944 [ 3.281928] loop2: detected capacity change from 0 to 129976 [ 3.287620] loop3: detected capacity change from 0 to 109072 [ 3.289341] loop4: detected capacity change from 0 to 83648 [ 3.293264] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.343503] usb 3-1.5: New USB device found, idVendor=291a, idProduct=8338, bcdDevice= 0.01 [ 3.343507] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.343508] usb 3-1.5: Product: Anker USB-C Hub Device [ 3.343509] usb 3-1.5: Manufacturer: Anker [ 3.343510] usb 3-1.5: SerialNumber: ... [ 3.430263] usb 3-2.2: new high-speed USB device number 7 using xhci_hcd [ 3.553403] block device autoloading is deprecated and will be removed. [ 3.553444] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230331/utaddress-204) [ 3.553451] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.553455] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.553458] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.553460] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230331/utaddress-204) [ 3.553464] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.553467] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.553468] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230331/utaddress-204) [ 3.553471] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.553475] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.553475] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.556633] e1000e: Intel(R) PRO/1000 Network Driver [ 3.556636] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.556830] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.599750] usb 4-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 3.601528] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.602024] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.602052] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.602752] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 3.603059] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 3.603363] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 3.603657] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 3.603950] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 3.623826] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01 [ 3.623832] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.623835] usb 4-1.1: Product: RTL9210B-CG [ 3.623836] usb 4-1.1: Manufacturer: Realtek [ 3.623838] usb 4-1.1: SerialNumber: ... [ 3.627721] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.650889] r8169 0000:06:00.0: enabling device (0100 -> 0103) [ 3.651023] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.659289] mc: Linux media interface: v0.10 [ 3.668536] usb 4-1.1: Enable of device-initiated U1 failed. [ 3.669194] usb 4-1.1: Enable of device-initiated U2 failed. [ 3.674711] r8169 0000:06:00.0 eth0: RTL8125B, 4478B4D79700AF8F33ED3D1A89EA5A64, XID 641, IRQ 57 [ 3.674716] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] r8169 0000:07:00.0: enabling device (0100 -> 0103) [ 3.674860] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.690059] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102) [ 3.690229] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102) [ 3.693890] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) B6C2493F9E621A36B4060F855EAB307A [ 3.693907] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.693953] e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.695008] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.695013] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.695014] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.695015] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.695016] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.695352] videodev: Linux video capture interface: v2.00 [ 3.705062] cryptd: max_cpu_qlen set to 1000 [ 3.717754] r8169 0000:07:00.0 eth2: RTL8125B, 1048A50C5E98C9A973344D3FB4CB28B3, XID 641, IRQ 58 [ 3.717762] r8169 0000:07:00.0 eth2: jumbo features [frames: 9194 bytes, tx checksumming: ko] AVX2 version of gcm_enc/dec engaged. [ 3.724643] AES CTR mode by8 optimization enabled [ 3.730268] usb 3-11: new full-speed USB device number 8 using xhci_hcd [ 3.791023] usb 3-2.2: New USB device found, idVendor=0bda, idProduct=4e27, bcdDevice= 0.04 [ 3.791031] usb 3-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 3.791033] usb 3-2.2: Product: USB SPDIF Adapter [ 3.791034] usb 3-2.2: Manufacturer: Generic [ 3.791036] usb 3-2.2: SerialNumber: ... [ 3.814973] md127: detected capacity change from 0 to 3421423616 [ 3.843645] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 3.844314] usb 3-11: device descriptor read/64, error -71 [ 3.853755] r8169 0000:07:00.0 enp7s0: renamed from eth2 [ 3.862494] e1000e 0000:00:19.0 eno1: renamed from eth1 [ 4.064533] iTCO_vendor_support: vendor-support=0 [ 4.069267] usb 3-11: device descriptor read/64, error -71 [ 4.079831] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.079835] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 4.079837] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.079839] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.079840] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.079842] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 4.079843] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 4.081054] REISERFS warning: read_super_block: reiserfs filesystem is deprecated and scheduled to be removed from the kernel in 2025 [ 4.081059] REISERFS (device sde1): found reiserfs format "3.6" with standard journal [ 4.081076] REISERFS (device sde1): using ordered data mode [ 4.081077] reiserfs: using flush barriers [ 4.094651] Console: switching to colour dummy device 80x25 [ 4.114865] REISERFS (device sde1): journal params: device sde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 4.114998] REISERFS (device sde1): checking transaction log (sde1) [ 4.239296] REISERFS (device sde1): Using r5 hash to sort names [ 4.291256] usb 3-11: new full-speed USB device number 9 using xhci_hcd [ 4.299066] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6 [ 4.344851] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 4.345217] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled [ 4.348567] XFS (sdc1): Mounting V5 Filesystem HASH_7F9-CABE-DE5D-CBED-4E90A0D40936 [ 4.361471] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460) [ 4.377714] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 4.393773] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 4.393887] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.402874] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.407250] usb 3-11: device descriptor read/64, error -71 [ 4.420609] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 4.425324] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 4.460906] XFS (md127): Mounting V5 Filesystem HASH_D2F-C9C3-D952-54DA-607D1C59A183 [ 4.491413] at24 0-0050: supply vcc not found, using dummy regulator [ 4.492361] at24 0-0050: 256 byte spd EEPROM, read-only [ 4.492888] at24 0-0051: supply vcc not found, using dummy regulator [ 4.497270] at24 0-0051: 256 byte spd EEPROM, read-only [ 4.497296] at24 0-0052: supply vcc not found, using dummy regulator [ 4.498603] at24 0-0052: 256 byte spd EEPROM, read-only [ 4.498624] at24 0-0053: supply vcc not found, using dummy regulator [ 4.499890] at24 0-0053: 256 byte spd EEPROM, read-only [ 4.501075] EXT4-fs (sdb2): mounted filesystem HASH_393-EEB5-8CDE-E44A-4D9DD35EA5A4 r/w with ordered data mode. Quota mode: none. [ 4.546983] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 4.569573] Creating 1 MTD partitions on "intel-spi": [ 4.569579] 0x000000000000-0x000001000000 : "BIOS" [ 4.597331] intel_rapl_common: Found RAPL domain package [ 4.597336] intel_rapl_common: Found RAPL domain core [ 4.597337] intel_rapl_common: Found RAPL domain uncore [ 4.597338] intel_rapl_common: Found RAPL domain dram [ 4.597342] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 4.597347] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 4.627264] usb 3-11: device descriptor read/64, error -71 [ 4.654091] XFS (sdc1): Ending clean mount [ 4.737477] usb usb3-port11: attempt power cycle [ 4.851358] usb 4-6: new SuperSpeed USB device number 6 using xhci_hcd [ 4.863985] usb 4-6: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 4.863988] usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 4.863989] usb 4-6: Product: ASMT105x [ 4.863990] usb 4-6: Manufacturer: ASMT [ 4.863991] usb 4-6: SerialNumber: ... [ 4.929435] usb 4-1.4: new SuperSpeed USB device number 7 using xhci_hcd [ 4.941838] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 4.941842] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.941843] usb 4-1.4: Product: USB 10/100/1000 LAN [ 4.941844] usb 4-1.4: Manufacturer: Realtek [ 4.941845] usb 4-1.4: SerialNumber: ... [ 5.029271] usb 3-2.3: new high-speed USB device number 10 using xhci_hcd [ 5.039021] cx23885: cx23885 driver version 0.0.4 loaded [ 5.039056] cx23885 0000:03:00.0: enabling device (0100 -> 0102) [ 5.039156] cx23885: CORE cx23885[0]: subsystem: 0070:2211, board: Hauppauge WinTV-HVR1270 [card=18,autodetected] XFS (md127): Ending clean mount [ 5.150703] usb 3-2.3: New USB device found, idVendor=19d2, idProduct=1432, bcdDevice=52.87 [ 5.150708] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.150710] usb 3-2.3: Product: ZTE Technologies MSM [ 5.150711] usb 3-2.3: Manufacturer: ZTE,Incorporated [ 5.150713] usb 3-2.3: SerialNumber: ... [ 5.452274] usb 3-11: new full-speed USB device number 11 using xhci_hcd [ 5.452391] usb 3-11: Device not responding to setup address. [ 5.656556] usb 3-11: Device not responding to setup address. [ 5.864321] usb 3-11: device not accepting address 11, error -71 [ 5.978353] usb 3-11: new full-speed USB device number 12 using xhci_hcd [ 5.978577] usb 3-11: Device not responding to setup address. [ 6.121574] tveeprom: Hauppauge model 22111, rev C2F5, serial# ... [ 6.121578] tveeprom: MAC address is 378DBF752879CF4B4A48FDE65EBFB61A [ 6.121580] tveeprom: tuner model is NXP 18271C2 (idx 155, type 54) [ 6.121581] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 6.121583] tveeprom: audio processor is CX23888 (idx 40) [ 6.121584] tveeprom: decoder processor is CX23888 (idx 34) [ 6.121585] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 6.121586] cx23885: cx23885[0]: hauppauge eeprom: model=22111 [ 6.185346] usb 3-11: Device not responding to setup address. [ 6.221745] cx25840 9-0044: cx23888 A/V decoder found @ 0x88 (cx23885[0]) [ 6.327571] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 6.328058] ACPI: video: Video Device [PEG0] (multi-head: yes rom: no post: no) [ 6.328200] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 6.328255] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 6.328288] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.340641] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.367955] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.371420] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.379216] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 6.379288] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 6.379341] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 6.392255] usb 3-11: device not accepting address 12, error -71 [ 6.392299] usb usb3-port11: unable to enumerate USB device [ 6.506272] usb 3-12: new full-speed USB device number 13 using xhci_hcd [ 6.650159] usb 3-12: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 6.650161] usb 3-12: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 6.650163] usb 3-12: Product: CSR8510 A10 [ 6.767271] usb 3-13: new high-speed USB device number 14 using xhci_hcd [ 6.856738] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 6.890525] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6.890528] cx23885: cx23885[0]: cx23885 based dvb card [ 6.900656] tda18271 8-0060: creating new instance [ 6.901945] usb 3-13: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01 [ 6.901948] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.901950] usb 3-13: Product: USB2.1 Hub [ 6.901951] usb 3-13: Manufacturer: Generic [ 6.902762] tda18271: TDA18271HD/C2 detected @ 8-0060 [ 6.903624] hub 3-13:1.0: USB hub found [ 6.904178] hub 3-13:1.0: 5 ports detected [ 7.020327] usb 3-14: new high-speed USB device number 15 using xhci_hcd [ 7.077370] dvbdev: DVB: registering new adapter (cx23885[0]) [ 7.077376] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3305 VSB/QAM Frontend)... [ 7.077884] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 [ 7.077889] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf7800000 [ 7.104323] Registered IR keymap rc-hauppauge [ 7.108193] IR RC5(x/sz) protocol handler initialized [ 7.130362] rc rc0: cx23885 IR (Hauppauge WinTV-HVR1270) as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rc/rc0 [ 7.130436] rc rc0: lirc_dev: driver cx23885 registered at minor = 0, raw IR receiver, no transmitter [ 7.130468] input: cx23885 IR (Hauppauge WinTV-HVR1270) as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rc/rc0/input15 [ 7.148546] usb 3-14: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 7.148551] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.148552] usb 3-14: Product: Flash Drive [ 7.148553] usb 3-14: Manufacturer: Samsung [ 7.148554] usb 3-14: SerialNumber: ... [ 7.224332] usb 3-13.1: new full-speed USB device number 16 using xhci_hcd [ 7.316372] usb 3-13.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 7.316378] usb 3-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.316379] usb 3-13.1: Product: USB Receiver [ 7.316380] usb 3-13.1: Manufacturer: Logitech [ 7.403326] usb 3-13.2: new high-speed USB device number 17 using xhci_hcd [ 7.492063] usb 3-13.2: New USB device found, idVendor=1949, idProduct=03a8, bcdDevice= 2.23 [ 7.492069] usb 3-13.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.492070] usb 3-13.2: Product: AFTMM [ 7.492071] usb 3-13.2: Manufacturer: Amazon [ 7.492072] usb 3-13.2: SerialNumber: ... [ 7.494759] usbcore: registered new device driver usbip-host [ 7.505771] vboxdrv: loading out-of-tree module taints kernel. [ 7.505776] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 7.521714] vboxdrv: Found 8 processor cores/threads [ 7.537434] vboxdrv: TSC mode is Invariant, tentative frequency 3591670694 Hz [ 7.537437] vboxdrv: Successfully loaded version 7.0.10 r158379 (interface 0x00330004) [ 7.539337] VBoxNetAdp: Successfully started. [ 7.541203] VBoxNetFlt: Successfully started. [ 7.590801] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.591009] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.685120] rtw_8822bu 3-9:1.0: Firmware version 27.2.0, H2C version 13 [ 7.821043] loop5: detected capacity change from 0 to 8 [ 7.843566] usbcore: registered new interface driver rtw_8822bu [ 7.882816] Loading iSCSI transport class v2.0-870. [ 7.958661] capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use) [ 7.983057] tun: Universal TUN/TAP device driver, 1.6 [ 8.233212] usb-storage 3-14:1.0: USB Mass Storage device detected [ 8.233353] scsi host6: usb-storage 3-14:1.0 [ 8.233466] usbcore: registered new interface driver usb-storage [ 8.241329] NET: Registered PF_QIPCRTR protocol family [ 8.316513] usb 4-1.1: Enable of device-initiated U1 failed. [ 8.320072] usb 4-1.1: Enable of device-initiated U2 failed. [ 8.330060] scsi host7: uas [ 8.336582] scsi 7:0:0:0: Direct-Access Realtek RTL9210B-CG 1.00 PQ: 0 ANSI: 6 [ 8.356030] scsi host8: uas [ 8.357722] usbcore: registered new interface driver uas [ 8.359615] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 8.361874] sd 7:0:0:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 8.361879] sd 7:0:0:0: [sdf] 4096-byte physical blocks [ 8.361977] Bluetooth: Core ver 2.22 [ 8.362013] NET: Registered PF_BLUETOOTH protocol family [ 8.362015] Bluetooth: HCI device and connection manager initialized [ 8.362019] Bluetooth: HCI socket layer initialized [ 8.362022] Bluetooth: L2CAP socket layer initialized [ 8.362026] Bluetooth: SCO socket layer initialized [ 8.364963] sd 7:0:0:0: [sdf] Write Protect is off [ 8.364970] sd 7:0:0:0: [sdf] Mode Sense: 37 00 00 08 [ 8.367615] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.368862] sd 7:0:0:0: [sdf] Preferred minimum I/O size 512 bytes not a multiple of physical block size (4096 bytes) [ 8.368867] sd 7:0:0:0: [sdf] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 8.369938] scsi 8:0:0:0: Direct-Access KINGSTON SA400S37240G 0 PQ: 0 ANSI: 6 [ 8.371332] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 8.371486] sd 8:0:0:0: [sdg] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 8.371601] sd 8:0:0:0: [sdg] Write Protect is off [ 8.371604] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00 [ 8.371763] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.371888] sd 8:0:0:0: [sdg] Preferred minimum I/O size 512 bytes [ 8.371891] sd 8:0:0:0: [sdg] Optimal transfer size 33553920 bytes [ 8.374978] sdg: sdg1 [ 8.376244] sd 8:0:0:0: [sdg] Attached SCSI disk [ 8.380605] usbcore: registered new device driver r8152-cfgselector [ 8.382710] sdf: sdf1 [ 8.382840] sd 7:0:0:0: [sdf] Attached SCSI disk [ 8.385922] usbip-host 4-1.4: 4-1.4 is not in match_busid table... skip! [ 8.461026] usbcore: registered new interface driver option [ 8.461043] usbserial: USB Serial support registered for GSM modem (1-port) [ 8.461111] option 3-2.3:1.0: GSM modem (1-port) converter detected [ 8.461297] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 8.462915] option 3-2.3:1.1: GSM modem (1-port) converter detected [ 8.475427] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 8.477711] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 7 using xhci_hcd [ 8.477825] option 3-2.3:1.2: GSM modem (1-port) converter detected [ 8.477997] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 8.487042] usbcore: registered new interface driver btusb [ 8.489078] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb [ 8.489084] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10 [ 8.507639] usbcore: registered new interface driver cdc_wdm [ 8.535434] qmi_wwan 3-2.3:1.3: cdc-wdm0: USB WDM device [ 8.544461] r8152 4-1.4:1.0: load rtl8153a-4 v2 02/07/20 successfully [ 8.548598] wwan wwan0: port wwan0qmi0 attached [ 8.586396] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC) [ 8.599122] input: Generic USB SPDIF Adapter Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:0BDA:4E27.0001/input/input16 [ 8.643559] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.643564] Bluetooth: BNEP filters: protocol multicast [ 8.643570] Bluetooth: BNEP socket layer initialized [ 8.650370] input: Generic USB SPDIF Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:0BDA:4E27.0001/input/input17 [ 8.650461] hid-generic 0003:0BDA:4E27.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Generic USB SPDIF Adapter] on usb-0000:00:14.0-2.2/input2 [ 8.652131] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.0/0003:046D:C52B.0002/input/input18 [ 8.657279] Bluetooth: MGMT ver 1.22 [ 8.666419] NET: Registered PF_ALG protocol family [ 8.683639] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1578 'lxc-info' [ 8.703768] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input0 [ 8.707707] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input19 [ 8.708171] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input20 [ 8.755453] r8169 0000:06:00.0 enp6s0: Link is Down [ 8.755743] qmi_wwan 3-2.3:1.3 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2.3, WWAN/QMI device, 09900273B2138509EAE2C72469F21D4D [ 8.755868] usbcore: registered new interface driver qmi_wwan [ 8.760760] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input21 [ 8.761000] r8152 4-1.4:1.0 eth0: v1.12.13 [ 8.761092] hid-generic 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input1 [ 8.766285] hid-generic 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input2 [ 8.766551] usbcore: registered new interface driver usbhid [ 8.766554] usbhid: USB HID core driver [ 8.775604] usbcore: registered new interface driver r8152 [ 8.781336] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [ 8.790436] usbcore: registered new interface driver cdc_ether [ 8.799234] usbcore: registered new interface driver r8153_ecm [ 8.856079] F2FS-fs (sdf1): Mounted with checkpoint version = b31d614 [ 8.949461] r8169 0000:07:00.0 enp7s0: Link is Down [ 8.952547] usbcore: registered new interface driver snd-usb-audio [ 8.953289] qmi_wwan 3-2.3:1.3 wwp0s20u2u3i3: renamed from wwan0 [ 8.989752] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input2 [ 9.005268] cx23885 0000:03:00.0: invalid VPD tag 0xff (size 65535) at offset 10 [ 9.029084] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 9.030284] r8169 0000:06:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 9.048318] r8169 0000:07:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 9.072562] RPC: Registered rdma transport module. [ 9.072565] RPC: Registered rdma backchannel transport module. [ 9.097682] input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input23 [ 9.097848] input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input24 [ 9.097926] hid-generic 0003:046D:404D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:14.0-13.1/input2:1 [ 9.118196] mousedev: PS/2 mouse device common for all mice [ 9.242401] NFSD: Using nfsdcld client tracking operations. [ 9.242406] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 9.289348] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input28 [ 9.289768] logitech-hidpp-device 0003:046D:404D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-13.1/input2:1 [ 9.687062] r8152 4-1.4:1.0 enp0s20u1u4: renamed from eth0 [ 11.487817] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u1u4: link becomes ready [ 11.488021] r8152 4-1.4:1.0 enp0s20u1u4: carrier on [ 11.706939] rfkill: input handler disabled [ 12.082218] Bluetooth: RFCOMM TTY layer initialized [ 12.082226] Bluetooth: RFCOMM socket layer initialized [ 12.082229] Bluetooth: RFCOMM ver 1.11 [ 12.108535] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 12.108575] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 12.506574] r8169 0000:06:00.0 enp6s0: Link is Up - 2.5Gbps/Full - flow control off [ 12.506586] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 12.509072] bridge0: port 1(enp6s0) entered blocking state [ 12.509086] bridge0: port 1(enp6s0) entered disabled state [ 12.509099] r8169 0000:06:00.0 enp6s0: entered allmulticast mode [ 12.509191] r8169 0000:06:00.0 enp6s0: entered promiscuous mode [ 12.509375] bridge0: port 1(enp6s0) entered blocking state [ 12.509378] bridge0: port 1(enp6s0) entered listening state [ 13.716019] scsi 6:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6 [ 13.716217] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 13.716459] sd 6:0:0:0: [sdh] 250626566 512-byte logical blocks: (128 GB/120 GiB) [ 13.716590] sd 6:0:0:0: [sdh] Write Protect is off [ 13.716591] sd 6:0:0:0: [sdh] Mode Sense: 43 00 00 00 [ 13.716714] sd 6:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.727580] sdh: sdh1 [ 13.727711] sd 6:0:0:0: [sdh] Attached SCSI removable disk [ 15.809002] wlan0: authenticate with 1CBEF1D7D2C11FF84AD7673AD5420C37 [ 16.468742] wlan0: send auth to 1CBEF1D7D2C11FF84AD7673AD5420C37 (try 1/3) [ 16.493848] wlan0: authenticate with 1CBEF1D7D2C11FF84AD7673AD5420C37 [ 16.493856] wlan0: send auth to 1CBEF1D7D2C11FF84AD7673AD5420C37 (try 1/3) [ 16.497496] wlan0: authenticated [ 16.499305] wlan0: associate with 1CBEF1D7D2C11FF84AD7673AD5420C37 (try 1/3) [ 16.503460] wlan0: RX AssocResp from 1CBEF1D7D2C11FF84AD7673AD5420C37 (capab=0x1011 status=0 aid=12) [ 16.508441] wlan0: associated [ 16.515470] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 1CBEF1D7D2C11FF84AD7673AD5420C37 [ 16.558394] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.054006] warning: `pmdalinux' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 20.216214] traps: pmdalinux[1635] general protection fault ip:7f0d87d602dd sp:7ffd086771b8 error:0 in libc.so.6[7f0d87c26000+15f000] bridge0: port 1(enp6s0) entered learning state [ 27.777309] bridge0: port 1(enp6s0) entered forwarding state [ 27.777378] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready