[ 5.695506] hub 4-1.3.3:1.0: USB hub found [ 5.695966] hub 4-1.3.3:1.0: 4 ports detected [ 5.715815] r8152 5-1.1:1.0 enp6s0f4u1u1: renamed from eth0 [ 5.980271] usb 4-XXX.XXX.XXX.XXX: new full-speed USB device number 8 using xhci_hcd [ 6.096353] rfkill: input handler disabled [ 6.098815] usb 4-XXX.XXX.XXX.XXX: New USB device found, idVendor=17ef, idProduct=a38f, bcdDevice= 0.00 [ 6.098819] usb 4-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.098821] usb 4-XXX.XXX.XXX.XXX: Product: 40AS [ 6.098822] usb 4-XXX.XXX.XXX.XXX: Manufacturer: Cypress Semiconductor [ 6.098824] usb 4-XXX.XXX.XXX.XXX: SerialNumber: ... [ 6.160463] hid-generic 0003:17EF:A38F.0004: hiddev1,hidraw3: USB HID v1.11 Device [Cypress Semiconductor 40AS] on usb-0000:06:00.4-XXX.XXX.XXX.XXX/input1 [ 6.233543] usb 4-XXX.XXX.XXX.XXX: new full-speed USB device number 9 using xhci_hcd [ 6.543075] usb 4-XXX.XXX.XXX.XXX: New USB device found, idVendor=17ef, idProduct=a396, bcdDevice= 0.14 [ 6.543081] usb 4-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.543084] usb 4-XXX.XXX.XXX.XXX: Product: ThinkPad USB-C Dock Gen2 USB Audio [ 6.543085] usb 4-XXX.XXX.XXX.XXX: Manufacturer: Lenovo [ 6.543087] usb 4-XXX.XXX.XXX.XXX: SerialNumber: ... [ 6.680502] input: Lenovo ThinkPad USB-C Dock Gen2 USB Audio as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb4/4-1/4-1.3/4-1.3.3/4-XXX.XXX.XXX.XXX/4-XXX.XXX.XXX.XXX:XXX.3/0003:17EF:A396.0005/input/input24 [ 6.737480] hid-generic 0003:17EF:A396.0005: input,hidraw4: USB HID v1.11 Device [Lenovo ThinkPad USB-C Dock Gen2 USB Audio] on usb-0000:06:00.4-XXX.XXX.XXX.XXX/input3 [ 6.810242] usb 4-XXX.XXX.XXX.XXX: new low-speed USB device number 10 using xhci_hcd [ 6.917924] usb 4-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20 [ 6.917927] usb 4-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.917928] usb 4-XXX.XXX.XXX.XXX: Product: USB-PS/2 Optical Mouse [ 6.917929] usb 4-XXX.XXX.XXX.XXX: Manufacturer: Logitech [ 7.014517] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb4/4-1/4-1.3/4-1.3.3/4-XXX.XXX.XXX.XXX/4-XXX.XXX.XXX.XXX:XXX.0/0003:046D:C050.0006/input/input25 [ 7.014983] hid-generic 0003:046D:C050.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:06:00.4-XXX.XXX.XXX.XXX/input0 [ 7.084774] usbcore: registered new interface driver snd-usb-audio [ 7.633935] [drm] Failed to add display topology, DTM TA is not initialized. [ 10.401232] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 10.412255] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 10.443828] wlp3s0: authenticated [ 10.446901] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 10.458660] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 10.478577] wlp3s0: associated [ 10.520977] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 11.835686] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 11.835688] wireguard: Copyright (C) A495-00C9 Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [ 14.111693] rfkill: input handler enabled [ 14.206050] fuse: init (API version 7.31) [ 16.136019] rfkill: input handler disabled [ 9435.013006] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800 [11795.182247] perf: interrupt took too long (3142 > 3130), lowering kernel.perf_event_max_sample_rate to 63600 [19404.501896] perf: interrupt took too long (4525 > 3927), lowering kernel.perf_event_max_sample_rate to 44100 [29492.185512] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29492.194930] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29492.330578] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [29492.342654] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [29492.361012] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [29816.522143] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29816.531667] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29816.564468] wlp3s0: authenticated [29816.567218] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29816.575865] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=2) [29816.589156] wlp3s0: associated [29816.600132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [29884.349374] wlp3s0: Connection to AP XX:XX:XX:XX:XX:XX lost [29884.531932] wlp3s0: Connection to AP XX:XX:XX:XX:XX:XX lost [29897.973628] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29897.981954] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29898.021896] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [29898.033215] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [29898.044185] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [34308.498369] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [34308.506625] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [34308.538568] wlp3s0: authenticated [34308.540104] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [34308.549804] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=8) [34308.566035] wlp3s0: associated [34309.569157] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [54881.005633] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 3=DEAUTH_LEAVING) [81693.288170] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [81693.297192] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [81693.368532] wlp3s0: authenticated [81693.372103] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [81693.384825] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [81693.403778] wlp3s0: associated [81693.425025] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [95146.547402] usb 2-2: new high-speed USB device number 5 using xhci_hcd [95146.691754] usb 2-2: New USB device found, idVendor=2a70, idProduct=f003, bcdDevice= 4.14 [95146.691756] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [95146.691757] usb 2-2: Product: GM1913 [95146.691758] usb 2-2: Manufacturer: OnePlus [95146.691759] usb 2-2: SerialNumber: ... [95146.723838] usb-storage 2-2:1.1: USB Mass Storage device detected [95146.724135] scsi host0: usb-storage 2-2:1.1 [95146.724289] usbcore: registered new interface driver usb-storage [95146.726915] usbcore: registered new interface driver uas [95147.733951] scsi 0:0:0:0: CD-ROM OnePlus Device Driver 0414 PQ: 0 ANSI: 2 [95147.734516] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [95147.762235] sr 0:0:0:0: Power-on or device reset occurred [95147.766092] sr 0:0:0:0: [sr0] scsi-1 drive [95147.766098] cdrom: Uniform CD-ROM driver Revision: 3.20 [95147.824939] sr 0:0:0:0: Attached scsi CD-ROM sr0 [95148.021262] ISO 9660 Extensions: Microsoft Joliet Level 3 [95148.027088] ISOFS: changing to secondary root [98557.586429] usb 2-2: USB disconnect, device number 5 [98590.009094] wlp3s0: Connection to AP XX:XX:XX:XX:XX:XX lost [98590.261257] wlp3s0: Connection to AP XX:XX:XX:XX:XX:XX lost [101800.498948] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [101800.506256] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [101800.539909] wlp3s0: authenticated [101800.543352] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [101800.556474] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=3) [101800.573579] wlp3s0: associated [101800.585115] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [102258.664633] [drm] Failed to add display topology, DTM TA is not initialized. [102259.744891] [drm] Failed to add display topology, DTM TA is not initialized. [102262.537948] [drm] Failed to add display topology, DTM TA is not initialized. [102263.888541] [drm] Failed to add display topology, DTM TA is not initialized. [102263.918832] [drm] Failed to add display topology, DTM TA is not initialized. [134922.801750] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 3=DEAUTH_LEAVING) [135693.140260] usb 2-2: new high-speed USB device number 6 using xhci_hcd [135693.288468] usb 2-2: New USB device found, idVendor=2a70, idProduct=f003, bcdDevice= 4.14 [135693.288473] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [135693.288475] usb 2-2: Product: GM1913 [135693.288477] usb 2-2: Manufacturer: OnePlus [135693.288478] usb 2-2: SerialNumber: ... [135693.301297] usb-storage 2-2:1.1: USB Mass Storage device detected [135693.301808] scsi host0: usb-storage 2-2:1.1 [135694.314974] scsi 0:0:0:0: CD-ROM OnePlus Device Driver 0414 PQ: 0 ANSI: 2 [135694.316419] sr 0:0:0:0: Power-on or device reset occurred [135694.317237] sr 0:0:0:0: [sr0] scsi-1 drive [135694.340963] sr 0:0:0:0: Attached scsi CD-ROM sr0 [135694.341237] sr 0:0:0:0: Attached scsi generic sg0 type 5 [135694.506438] ISO 9660 Extensions: Microsoft Joliet Level 3 [135694.506737] ISOFS: changing to secondary root [135702.008413] usb 2-2: USB disconnect, device number 6 [135702.540256] usb 2-2: new high-speed USB device number 7 using xhci_hcd [135702.685273] usb 2-2: New USB device found, idVendor=2a70, idProduct=f00e, bcdDevice= 4.14 [135702.685278] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [135702.685281] usb 2-2: Product: GM1913 [135702.685283] usb 2-2: Manufacturer: OnePlus [135702.685284] usb 2-2: SerialNumber: ... [135702.781489] rndis_host 2-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.3-2, RNDIS device, XX:XX:XX:XX:XX:XX [135702.781535] usbcore: registered new interface driver rndis_host [135702.792084] rndis_host 2-2:1.0 enp6s0f3u2: renamed from usb0 [135780.377723] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [135780.388753] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [135780.422310] wlp3s0: authenticated [135780.423294] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [135780.435795] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [135780.450630] wlp3s0: associated [135780.462435] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [175361.797766] [drm] Failed to add display topology, DTM TA is not initialized. [175362.857897] [drm] Failed to add display topology, DTM TA is not initialized. [175362.885316] [drm] Failed to add display topology, DTM TA is not initialized. [175365.654371] [drm] Failed to add display topology, DTM TA is not initialized. [175367.157336] [drm] Failed to add display topology, DTM TA is not initialized. [175367.190604] [drm] Failed to add display topology, DTM TA is not initialized. [175500.532886] usb 5-1.2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [175500.551087] usb 5-1.2: New USB device found, idVendor=054c, idProduct=0c34, bcdDevice= 2.00 [175500.551092] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [175500.551095] usb 5-1.2: Product: ILCE-7M3 [175500.551096] usb 5-1.2: Manufacturer: Sony [175500.551098] usb 5-1.2: SerialNumber: ... [177861.511809] usb 5-1.2: USB disconnect, device number 5 [177873.035904] usb 5-1.2: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd [177873.053921] usb 5-1.2: New USB device found, idVendor=054c, idProduct=0c34, bcdDevice= 2.00 [177873.053925] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [177873.053928] usb 5-1.2: Product: ILCE-7M3 [177873.053930] usb 5-1.2: Manufacturer: Sony [177873.053932] usb 5-1.2: SerialNumber: ... [178110.968610] usb 5-1.2: USB disconnect, device number 6 [179124.421581] usb 2-2: USB disconnect, device number 7 [179124.421729] rndis_host 2-2:1.0 enp6s0f3u2: unregister 'rndis_host' usb-0000:06:00.3-2, RNDIS device [179141.311060] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [179141.320116] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [179141.357711] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [179141.375930] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [179141.385666] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [179148.157914] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [179148.170579] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [179148.306026] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [179148.309242] wlp3s0: authenticated [179148.312373] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [179148.322075] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=3) [179148.330718] wlp3s0: associated [179400.965673] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [179400.975205] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [179401.013818] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [179401.023893] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [179401.033902] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [186218.414609] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186218.426396] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186218.458113] wlp3s0: authenticated [186218.461629] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [186218.472305] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=4) [186218.491766] wlp3s0: associated [186218.508175] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [205659.116321] usb 2-2: new high-speed USB device number 8 using xhci_hcd [205659.261139] usb 2-2: New USB device found, idVendor=2a70, idProduct=f003, bcdDevice= 4.14 [205659.261144] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [205659.261146] usb 2-2: Product: GM1913 [205659.261148] usb 2-2: Manufacturer: OnePlus [205659.261149] usb 2-2: SerialNumber: ... [205659.270210] usb-storage 2-2:1.1: USB Mass Storage device detected [205659.270609] scsi host0: usb-storage 2-2:1.1 [205660.280641] scsi 0:0:0:0: CD-ROM OnePlus Device Driver 0414 PQ: 0 ANSI: 2 [205660.281333] sr 0:0:0:0: Power-on or device reset occurred [205660.281956] sr 0:0:0:0: [sr0] scsi-1 drive [205660.306766] sr 0:0:0:0: Attached scsi CD-ROM sr0 [205660.306929] sr 0:0:0:0: Attached scsi generic sg0 type 5 [205660.473132] ISO 9660 Extensions: Microsoft Joliet Level 3 [205660.473454] ISOFS: changing to secondary root [212894.169434] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [212896.124951] r8169 0000:02:00.0: invalid short VPD tag 00 at offset 1 [212896.252240] serial 0000:02:00.1: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [212896.382278] serial 0000:02:00.2: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [212896.512233] pci 0000:02:00.3: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [212896.642251] ehci-pci 0000:02:00.4: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update