Log: dmesg
[ 0.000000] reserve setup_data: [mem 0x0000000073cab058-0x0000000074224fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000074225000-0x0000000074225fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000074226000-0x0000000074226fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000074227000-0x000000008bd4dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008bd4e000-0x000000008c88dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008c88e000-0x000000008cf7dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008cffe000-0x000000008cffefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026effffff] usable
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x8cffd014 SMBIOS=0x8c0d8000 SMBIOS 3.0=0x8c0d6000 ESRT=0x8c0d3298 MEMATTR=0x7c97b018 TPMEventLog=0x73cac018
[ 0.000000] [Firmware Bug]: TPM Final Events table missing or invalid
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP NOTEBOOK/832A, BIOS F.32 11/23/2017
[ 0.000000] tsc: Detected 2700.000 MHz processor
[ 0.001602] tsc: Detected 2699.909 MHz TSC
[ 0.001602] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001604] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001613] last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[ 0.001620] MTRR default type: write-back
[ 0.001621] MTRR fixed ranges enabled:
[ 0.001623] 00000-9FFFF write-back
[ 0.001623] A0000-BFFFF uncachable
[ 0.001624] C0000-FFFFF write-protect
[ 0.001625] MTRR variable ranges enabled:
[ 0.001627] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.001628] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.001628] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.001629] 3 base 008E000000 mask 7FFE000000 uncachable
[ 0.001630] 4 base 008D800000 mask 7FFF800000 uncachable
[ 0.001630] 5 disabled
[ 0.001631] 6 disabled
[ 0.001631] 7 disabled
[ 0.001632] 8 disabled
[ 0.001632] 9 disabled
[ 0.002184] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002412] last_pfn = 0x8cfff max_arch_pfn = 0x400000000
[ 0.016056] esrt: Reserving ESRT space from 0x000000008c0d3298 to 0x000000008c0d32d0.
[ 0.016064] check: Scanning 1 areas for low memory corruption
[ 0.016067] Using GB pages for direct mapping
[ 0.016070] BRK [0x263401000, 0x263401fff] PGTABLE
[ 0.016071] BRK [0x263402000, 0x263402fff] PGTABLE
[ 0.016072] BRK [0x263403000, 0x263403fff] PGTABLE
[ 0.016114] BRK [0x263404000, 0x263404fff] PGTABLE
[ 0.016115] BRK [0x263405000, 0x263405fff] PGTABLE
[ 0.016272] BRK [0x263406000, 0x263406fff] PGTABLE
[ 0.016304] BRK [0x263407000, 0x263407fff] PGTABLE
[ 0.016371] BRK [0x263408000, 0x263408fff] PGTABLE
[ 0.016427] BRK [0x263409000, 0x263409fff] PGTABLE
[ 0.016503] BRK [0x26340a000, 0x26340afff] PGTABLE
[ 0.016582] secureboot: Secure boot enabled
[ 0.016584] RAMDISK: [mem 0x3d0c3000-0x3fffdfff]
[ 0.016591] ACPI: Early table checksum verification disabled
[ 0.016594] ACPI: RSDP 0x000000008CFFD014 000024 (v02 HPQOEM)
[ 0.016597] ACPI: XSDT 0x000000008CFAB188 000134 (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)
[ 0.016603] ACPI: FACP 0x000000008CFDC000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000)
[ 0.016608] ACPI: DSDT 0x000000008CFAF000 029717 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.016611] ACPI: FACS 0x000000008CF59000 000040
[ 0.016613] ACPI: UEFI 0x000000008CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016616] ACPI: UEFI 0x000000008CFFB000 000042 (v01 HPQOEM INSYDE 00000002 HP 00040000)
[ 0.016618] ACPI: SSDT 0x000000008CFF3000 007764 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016621] ACPI: MSDM 0x000000008CFF2000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.016624] ACPI: SSDT 0x000000008CFF1000 0004C3 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016626] ACPI: SSDT 0x000000008CFF0000 000046 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.016629] ACPI: TPM2 0x000000008CFEF000 000034 (v03 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.016632] ACPI: SSDT 0x000000008CFEB000 003898 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.016635] ACPI: SSDT 0x000000008CFE1000 009328 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016637] ACPI: ASF! 0x000000008CFE0000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016640] ACPI: ASPT 0x000000008CFDF000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016643] ACPI: BOOT 0x000000008CFDE000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016645] ACPI: DBGP 0x000000008CFDD000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.016648] ACPI: HPET 0x000000008CFDB000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016650] ACPI: APIC 0x000000008CFDA000 0000BC (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.016653] ACPI: MCFG 0x000000008CFD9000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016656] ACPI: SSDT 0x000000008CFAE000 00050D (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
[ 0.016658] ACPI: SSDT 0x000000008CFAD000 000E24 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016661] ACPI: SSDT 0x000000008CFAC000 00018E (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016663] ACPI: LPIT 0x000000008CFAA000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.016666] ACPI: WSMT 0x000000008CFA9000 000028 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.016669] ACPI: SSDT 0x000000008CFA8000 00029F (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
[ 0.016671] ACPI: SSDT 0x000000008CFA7000 000346 (v01 HPQOEM INSYDE 00000000 ACPI 00040000)
[ 0.016674] ACPI: SSDT 0x000000008CFA3000 003002 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016677] ACPI: SSDT 0x000000008CFA2000 00051E (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016679] ACPI: DBGP 0x000000008CFA1000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.016682] ACPI: DBG2 0x000000008CFA0000 000054 (v00 HPQOEM INSYDE 00000002 HP 00040000)
[ 0.016684] ACPI: SSDT 0x000000008CF9E000 0010B0 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.016687] ACPI: SSDT 0x000000008CF9D000 000EDE (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.016690] ACPI: DMAR 0x000000008CF9C000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016692] ACPI: NHLT 0x000000008CF9B000 00002D (v00 HPQOEM INSYDE 00000002 HP 00040000)
[ 0.016695] ACPI: FPDT 0x000000008CF9A000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.016698] ACPI: BGRT 0x000000008CF99000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.016705] ACPI: Local APIC address 0xfee00000
[ 0.016879] No NUMA configuration found
[ 0.016880] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[ 0.016890] NODE_DATA(0) allocated [mem 0x26efd5000-0x26effffff]
[ 0.017137] Zone ranges:
[ 0.017137] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.017139] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.017140] Normal [mem 0x0000000100000000-0x000000026effffff]
[ 0.017141] Device empty
[ 0.017141] Movable zone start for each node
[ 0.017144] Early memory node ranges
[ 0.017145] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.017146] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.017147] node 0: [mem 0x0000000000100000-0x0000000074224fff]
[ 0.017148] node 0: [mem 0x0000000074227000-0x000000008bd4dfff]
[ 0.017148] node 0: [mem 0x000000008cffe000-0x000000008cffefff]
[ 0.017149] node 0: [mem 0x0000000100000000-0x000000026effffff]
[ 0.017347] Zeroed struct page in unavailable ranges: 21271 pages
[ 0.017349] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[ 0.017350] On node 0 totalpages: 2075881
[ 0.017351] DMA zone: 64 pages used for memmap
[ 0.017352] DMA zone: 21 pages reserved
[ 0.017353] DMA zone: 3996 pages, LIFO batch:0
[ 0.017396] DMA32 zone: 8886 pages used for memmap
[ 0.017397] DMA32 zone: 568653 pages, LIFO batch:63
[ 0.027533] Normal zone: 23488 pages used for memmap
[ 0.027534] Normal zone: 1503232 pages, LIFO batch:63
[ 0.049579] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[ 0.049725] ACPI: PM-Timer IO Port: 0x1808
[ 0.049727] ACPI: Local APIC address 0xfee00000
[ 0.049733] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.049734] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.049734] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.049735] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.049735] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.049736] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.049736] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.049737] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.049764] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.049766] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.049767] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.049769] ACPI: IRQ0 used by override.
[ 0.049770] ACPI: IRQ9 used by override.
[ 0.049771] Using ACPI (MADT) for SMP configuration information
[ 0.049773] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.049779] e820: update [mem 0x7c182000-0x7c18bfff] usable ==> reserved
[ 0.049789] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.049809] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.049810] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.049812] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.049813] PM: Registered nosave memory: [mem 0x73c8c000-0x73c8cfff]
[ 0.049815] PM: Registered nosave memory: [mem 0x73c9a000-0x73c9afff]
[ 0.049815] PM: Registered nosave memory: [mem 0x73c9b000-0x73c9bfff]
[ 0.049817] PM: Registered nosave memory: [mem 0x73cab000-0x73cabfff]
[ 0.049818] PM: Registered nosave memory: [mem 0x74225000-0x74225fff]
[ 0.049819] PM: Registered nosave memory: [mem 0x74226000-0x74226fff]
[ 0.049821] PM: Registered nosave memory: [mem 0x7c182000-0x7c18bfff]
[ 0.049822] PM: Registered nosave memory: [mem 0x8bd4e000-0x8c88dfff]
[ 0.049823] PM: Registered nosave memory: [mem 0x8c88e000-0x8cf7dfff]
[ 0.049823] PM: Registered nosave memory: [mem 0x8cf7e000-0x8cffdfff]
[ 0.049825] PM: Registered nosave memory: [mem 0x8cfff000-0x8fffffff]
[ 0.049825] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.049826] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.049826] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.049827] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.049827] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.049828] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.049828] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.049829] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.049829] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.049830] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.049830] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.049831] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.049831] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.049832] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.049832] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.049833] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.049834] [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.049835] Booting paravirtualized kernel on bare hardware
[ 0.049839] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.049845] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.050132] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.050139] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.050140] pcpu-alloc: [0] 0 1 2 3
[ 0.050169] Built 1 zonelists, mobility grouping on. Total pages: 2043422
[ 0.050169] Policy zone: Normal
[ 0.050171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=HASH_39B-A58D-48A0-078A-D17B4EE075CA ro quiet splash vt.handoff=7
[ 0.051056] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.051483] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.051535] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.058580] Calgary: detecting Calgary via BIOS EBDA area
[ 0.058581] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.092791] Memory: 7976980K/8303524K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 326544K reserved, 0K cma-reserved)
[ 0.092799] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.092948] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.092965] Kernel/User page tables isolation: enabled
[ 0.092982] ftrace: allocating 44488 entries in 174 pages
[ 0.111324] rcu: Hierarchical RCU implementation.
[ 0.111326] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.111327] Tasks RCU enabled.
[ 0.111328] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.111328] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.114445] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.115008] random: crng done (trusting CPU's manufacturer)
[ 0.115031] vt handoff: transparent VT on vt#7
[ 0.115038] Console: colour dummy device 80x25
[ 0.115043] printk: console [tty0] enabled
[ 0.115065] ACPI: Core revision 20190816
[ 0.115487] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.115561] APIC: Switch to symmetric I/O mode setup
[ 0.115563] DMAR: Host address width 39
[ 0.115564] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.115570] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.115571] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.115575] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.115576] DMAR: RMRR base: 0x0000008c7b9000 end: 0x0000008c7d8fff
[ 0.115577] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[ 0.115578] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.115579] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.115580] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.117442] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.117444] x2apic enabled
[ 0.117457] Switched APIC routing to cluster x2apic.
[ 0.121480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139635] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[ 0.139640] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636)
[ 0.139642] pid_max: default: 32768 minimum: 301
[ 0.142343] LSM: Security Framework initializing
[ 0.142356] Yama: becoming mindful.
[ 0.142386] AppArmor: AppArmor initialized
[ 0.142435] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.142450] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.142467] *** VALIDATE tmpfs ***
[ 0.142616] *** VALIDATE proc ***
[ 0.142665] *** VALIDATE cgroup1 ***
[ 0.142666] *** VALIDATE cgroup2 ***
[ 0.142741] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.142759] process: using mwait in idle threads
[ 0.142762] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.142762] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.142766] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.142768] Spectre V2 : Mitigation: Full generic retpoline
[ 0.142768] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.142769] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.142770] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.142770] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.142772] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.142778] SRBDS: Mitigation: Microcode
[ 0.142778] MDS: Mitigation: Clear CPU buffers
[ 0.143043] Freeing SMP alternatives memory: 40K
[ 0.147742] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.147899] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.147905] ... version: 4
[ 0.147906] ... bit width: 48
[ 0.147906] ... generic registers: 4
[ 0.147907] ... value mask: 0000ffffffffffff
[ 0.147907] ... max period: 00007fffffffffff
[ 0.147908] ... fixed-purpose events: 3
[ 0.147908] ... event mask: 000000070000000f
[ 0.147948] rcu: Hierarchical SRCU implementation.
[ 0.148829] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.148882] smp: Bringing up secondary CPUs ...
[ 0.148970] x86: Booting SMP configuration:
[ 0.148971] .... node #0, CPUs: #1 #2
[ 0.152167] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.152167] #3
[ 0.152167] smp: Brought up 1 node, 4 CPUs
[ 0.152167] smpboot: Max logical packages: 1
[ 0.152167] smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
[ 0.153543] devtmpfs: initialized
[ 0.153543] x86/mm: Memory block size: 128MB
[ 0.155778] PM: Registering ACPI NVS region [mem 0x74225000-0x74225fff] (4096 bytes)
[ 0.155778] PM: Registering ACPI NVS region [mem 0x8c88e000-0x8cf7dfff] (7274496 bytes)
[ 0.155812] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.155812] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.155812] pinctrl core: initialized pinctrl subsystem
[ 0.155903] PM: RTC time: 03:47:19, date: 2020-08-31
[ 0.156045] NET: Registered protocol family 16
[ 0.156139] EISA bus registered
[ 0.156139] cpuidle: using governor ladder
[ 0.156139] cpuidle: using governor menu
[ 0.156139] Simple Boot Flag at 0x44 set to 0x1
[ 0.156139] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.156139] ACPI: bus type PCI registered
[ 0.156139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.156139] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.156139] PCI: Using configuration type 1 for base access
[ 0.156139] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.157085] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.157085] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.159754] ACPI: Added _OSI(Module Device)
[ 0.159755] ACPI: Added _OSI(Processor Device)
[ 0.159756] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.159757] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.159758] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.159759] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.159760] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.216068] ACPI: 15 ACPI AML tables successfully acquired and loaded
[ 0.220343] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.224808] ACPI: Dynamic OEM Table Load:
[ 0.224830] ACPI: SSDT 0xFFFF894765266000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.227011] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.228967] ACPI: Dynamic OEM Table Load:
[ 0.228976] ACPI: SSDT 0xFFFF894764F5E000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.231458] ACPI: Dynamic OEM Table Load:
[ 0.231467] ACPI: SSDT 0xFFFF894765263000 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.233970] ACPI: Dynamic OEM Table Load:
[ 0.233978] ACPI: SSDT 0xFFFF894764D30800 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.238302] ACPI: EC: EC started
[ 0.238302] ACPI: EC: interrupt blocked
[ 0.238787] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.238788] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.238790] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.238790] ACPI: Interpreter enabled
[ 0.238845] ACPI: (supports S0 S3 S4 S5)
[ 0.238846] ACPI: Using IOAPIC for interrupt routing
[ 0.238890] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240345] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.249310] ACPI: Power Resource [WRST] (on)
[ 0.249853] ACPI: Power Resource [WRST] (on)
[ 0.250380] ACPI: Power Resource [WRST] (on)
[ 0.250907] ACPI: Power Resource [WRST] (on)
[ 0.251228] ACPI: Power Resource [WRST] (on)
[ 0.252068] ACPI: Power Resource [WRST] (on)
[ 0.252610] ACPI: Power Resource [WRST] (on)
[ 0.253150] ACPI: Power Resource [WRST] (on)
[ 0.253682] ACPI: Power Resource [WRST] (on)
[ 0.254209] ACPI: Power Resource [WRST] (on)
[ 0.254733] ACPI: Power Resource [WRST] (on)
[ 0.255261] ACPI: Power Resource [WRST] (on)
[ 0.255763] ACPI: Power Resource [WRST] (on)
[ 0.256260] ACPI: Power Resource [WRST] (on)
[ 0.256754] ACPI: Power Resource [WRST] (on)
[ 0.257254] ACPI: Power Resource [WRST] (on)
[ 0.257750] ACPI: Power Resource [WRST] (on)
[ 0.258253] ACPI: Power Resource [WRST] (on)
[ 0.258749] ACPI: Power Resource [WRST] (on)
[ 0.259248] ACPI: Power Resource [WRST] (on)
[ 0.274268] ACPI: Power Resource [FN00] (off)
[ 0.274387] ACPI: Power Resource [FN01] (off)
[ 0.274513] ACPI: Power Resource [FN02] (off)
[ 0.274632] ACPI: Power Resource [FN03] (off)
[ 0.274748] ACPI: Power Resource [FN04] (off)
[ 0.276252] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.276259] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.276514] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.276755] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.276756] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.279241] PCI host bridge to bus 0000:00
[ 0.279244] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.279245] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.279246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.279247] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.279248] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.279249] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.279250] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.279251] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.279252] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.279253] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.279254] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.279255] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.279256] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.279257] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.279258] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.279259] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.279260] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.279261] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.279262] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.279272] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.280532] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.280545] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[ 0.280551] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.280556] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.280573] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.281586] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.281601] pci 0000:00:04.0: reg 0x10: [mem 0xb1220000-0xb1227fff 64bit]
[ 0.282657] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.282674] pci 0000:00:08.0: reg 0x10: [mem 0xb1232000-0xb1232fff 64bit]
[ 0.283707] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.283732] pci 0000:00:14.0: reg 0x10: [mem 0xb1210000-0xb121ffff 64bit]
[ 0.283807] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.284907] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.284931] pci 0000:00:14.2: reg 0x10: [mem 0xb1233000-0xb1233fff 64bit]
[ 0.285982] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.286011] pci 0000:00:16.0: reg 0x10: [mem 0xb1234000-0xb1234fff 64bit]
[ 0.286093] pci 0000:00:16.0: PME# supported from D3hot
[ 0.287154] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.287174] pci 0000:00:17.0: reg 0x10: [mem 0xb1230000-0xb1231fff]
[ 0.287183] pci 0000:00:17.0: reg 0x14: [mem 0xb1237000-0xb12370ff]
[ 0.287191] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087]
[ 0.287199] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b]
[ 0.287207] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.287215] pci 0000:00:17.0: reg 0x24: [mem 0xb1235000-0xb12357ff]
[ 0.287262] pci 0000:00:17.0: PME# supported from D3hot
[ 0.288295] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.288386] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.289457] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.289548] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.290638] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.291762] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.291780] pci 0000:00:1f.2: reg 0x10: [mem 0xb122c000-0xb122ffff]
[ 0.292845] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 0.292877] pci 0000:00:1f.3: reg 0x10: [mem 0xb1228000-0xb122bfff 64bit]
[ 0.292913] pci 0000:00:1f.3: reg 0x20: [mem 0xb1200000-0xb120ffff 64bit]
[ 0.292968] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.294084] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.294144] pci 0000:00:1f.4: reg 0x10: [mem 0xb1236000-0xb12360ff 64bit]
[ 0.294214] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f]
[ 0.295347] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.295379] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.295408] pci 0000:01:00.0: reg 0x18: [mem 0xb1104000-0xb1104fff 64bit]
[ 0.295426] pci 0000:01:00.0: reg 0x20: [mem 0xb1100000-0xb1103fff 64bit]
[ 0.295536] pci 0000:01:00.0: supports D1 D2
[ 0.295537] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.295774] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.295777] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.295780] pci 0000:00:1c.0: bridge window [mem 0xb1100000-0xb11fffff]
[ 0.296013] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
[ 0.296115] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1001fff 64bit]
[ 0.296466] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.297099] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.297103] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb10fffff]
[ 0.305605] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.305676] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.305745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.305814] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.305882] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.305950] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.306018] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.306086] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.307230] ACPI: EC: interrupt unblocked
[ 0.307252] ACPI: EC: event unblocked
[ 0.307264] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.307265] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.307355] iommu: Default domain type: Translated
[ 0.307355] SCSI subsystem initialized
[ 0.307645] libata version 3.00 loaded.
[ 0.307661] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.307661] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.307661] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.307661] vgaarb: loaded
[ 0.307666] ACPI: bus type USB registered
[ 0.307680] usbcore: registered new interface driver usbfs
[ 0.307686] usbcore: registered new interface driver hub
[ 0.307699] usbcore: registered new device driver usb
[ 0.307724] pps_core: LinuxPPS API ver. 1 registered
[ 0.307725] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX>
[ 0.307727] PTP clock support registered
[ 0.307741] EDAC MC: Ver: 3.0.0
[ 0.307884] Registered efivars operations
[ 0.307884] PCI: Using ACPI for IRQ routing
[ 0.335053] PCI: pci_cache_line_size set to 64 bytes
[ 0.335427] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.335428] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.335429] e820: reserve RAM buffer [mem 0x73c8c018-0x73ffffff]
[ 0.335430] e820: reserve RAM buffer [mem 0x73c9b018-0x73ffffff]
[ 0.335430] e820: reserve RAM buffer [mem 0x74225000-0x77ffffff]
[ 0.335431] e820: reserve RAM buffer [mem 0x7c182000-0x7fffffff]
[ 0.335432] e820: reserve RAM buffer [mem 0x8bd4e000-0x8bffffff]
[ 0.335432] e820: reserve RAM buffer [mem 0x8cfff000-0x8fffffff]
[ 0.335433] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[ 0.335638] NetLabel: Initializing
[ 0.335638] NetLabel: domain hash size = 128
[ 0.335638] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.335638] NetLabel: unlabeled traffic allowed by default
[ 0.336323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.336326] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.339642] clocksource: Switched to clocksource tsc-early
[ 0.351676] *** VALIDATE bpf ***
[ 0.351772] VFS: Disk quotas dquot_6.6.0
[ 0.351791] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.351818] *** VALIDATE ramfs ***
[ 0.351821] *** VALIDATE hugetlbfs ***
[ 0.351897] AppArmor: AppArmor Filesystem Enabled
[ 0.351928] pnp: PnP ACPI init
[ 0.352177] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.352178] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.352180] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.352181] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.352183] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.352184] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.352185] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.352190] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352580] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.352583] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352785] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.352786] system 00:02: [io 0xfd60-0xfd63] has been reserved
[ 0.352788] system 00:02: [io 0xffff] has been reserved
[ 0.352789] system 00:02: [io 0xffff] has been reserved
[ 0.352790] system 00:02: [io 0xffff] has been reserved
[ 0.352791] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.352792] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.352795] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352911] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.352952] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.352955] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.352994] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.353019] pnp 00:06: Plug and Play ACPI device, IDs SYN3251 PNP0f13 (active)
[ 0.365410] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.365411] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.365413] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.365414] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.365415] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.365418] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366114] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.366116] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.366117] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.366118] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.366119] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.366121] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.366122] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.366123] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
[ 0.366125] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.366126] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.366127] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
[ 0.366130] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367026] pnp: PnP ACPI: found 9 devices
[ 0.368201] thermal_sys: Registered thermal governor 'fair_share'
[ 0.368202] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.368202] thermal_sys: Registered thermal governor 'step_wise'
[ 0.368203] thermal_sys: Registered thermal governor 'user_space'
[ 0.368204] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.372703] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.372736] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.372739] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.372744] pci 0000:00:1c.0: bridge window [mem 0xb1100000-0xb11fffff]
[ 0.372750] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.372754] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb10fffff]
[ 0.372761] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.372762] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.372763] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.372764] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.372765] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.372766] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.372767] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.372768] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.372769] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.372770] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.372771] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.372772] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.372773] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.372775] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.372776] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.372776] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.372778] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[ 0.372779] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.372780] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.372781] pci_bus 0000:01: resource 1 [mem 0xb1100000-0xb11fffff]
[ 0.372782] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb10fffff]
[ 0.373008] NET: Registered protocol family 2
[ 0.373158] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.373202] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.373350] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.373423] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.373456] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.373481] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.373538] NET: Registered protocol family 1
[ 0.373543] NET: Registered protocol family 44
[ 0.373554] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.375335] PCI: CLS 64 bytes, default 64
[ 0.375374] Trying to unpack rootfs image as initramfs...
[ 0.499001] Initramfs unpacking failed: Decoding failed
[ 0.505824] Freeing initrd memory: 48364K
[ 0.523706] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.523713] software IO TLB: mapped [mem 0x87703000-0x8b703000] (64MB)
[ 0.524000] check: Scanning for low memory corruption every 60 seconds
[ 0.526016] Initialise system trusted keyrings
[ 0.526033] Key type blacklist registered
[ 0.526067] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.527294] zbud: loaded
[ 0.527650] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.527798] fuse: init (API version 7.31)
[ 0.527837] *** VALIDATE fuse ***
[ 0.527839] *** VALIDATE fuse ***
[ 0.527926] Platform Keyring initialized
[ 0.532714] Key type asymmetric registered
[ 0.532715] Asymmetric key parser 'x509' registered
[ 0.532723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.532761] io scheduler mq-deadline registered
[ 0.533174] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[ 0.533461] pcieport 0000:00:1c.5: AER: enabled with IRQ 123
[ 0.533531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.533588] efifb: probing for efifb
[ 0.533611] efifb: showing boot graphics
[ 0.534118] efifb: framebuffer at 0xa0000000, using 4128k, total 4128k
[ 0.534119] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.534120] efifb: scrolling: redraw
[ 0.534121] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.534165] fbcon: Deferring console take-over
[ 0.534166] fb0: EFI VGA frame buffer device
[ 0.534172] intel_idle: MWAIT substates: 0x11142120
[ 0.534173] intel_idle: v0.4.1 model 0x8E
[ 0.534393] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.534604] ACPI: AC Adapter [ACAD] (off-line)
[ 0.534680] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input0
[ 0.534695] ACPI: Lid Switch [LID0]
[ 0.534745] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.534937] ACPI: Power Button [PWRF]
[ 0.536224] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.536225] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.536417] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.536418] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.536493] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.536494] ACPI: Thermal Zone [TZ02] (10 C)
[ 0.536744] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.538555] Linux agpgart interface v0.103
[ 0.600333] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.602172] loop: module loaded
[ 0.602373] libphy: Fixed MDIO Bus: probed
[ 0.602373] tun: Universal TUN/TAP device driver, 1.6
[ 0.602402] PPP generic driver version 2.4.2
[ 0.602448] VFIO - User Level meta-driver version: 0.3
[ 0.602527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.602529] ehci-pci: EHCI PCI platform driver
[ 0.602539] ehci-platform: EHCI generic platform driver
[ 0.602551] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.602553] ohci-pci: OHCI PCI platform driver
[ 0.602559] ohci-platform: OHCI generic platform driver
[ 0.602565] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.602815] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.602820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.603888] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 0.604093] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.604292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.604293] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.604295] usb usb1: Product: xHCI Host Controller
[ 0.604296] usb usb1: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 0.604297] usb usb1: SerialNumber: ...
[ 0.604434] hub 1-0:1.0: USB hub found
[ 0.604449] hub 1-0:1.0: 12 ports detected
[ 0.605801] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.605804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.605806] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.605837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.605838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.605839] usb usb2: Product: xHCI Host Controller
[ 0.605840] usb usb2: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 0.605841] usb usb2: SerialNumber: ...
[ 0.605959] hub 2-0:1.0: USB hub found
[ 0.605969] hub 2-0:1.0: 6 ports detected
[ 0.606376] usb: port power management may be unreliable
[ 0.606677] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.630558] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.630561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.630746] mousedev: PS/2 mouse device common for all mice
[ 0.631099] rtc_cmos 00:03: RTC can wake from S4
[ 0.631625] rtc_cmos 00:03: registered as rtc0
[ 0.631638] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.631651] i2c /dev entries driver
[ 0.631697] device-mapper: uevent: version 1.0.3
[ 0.631747] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX
[ 0.631764] platform eisa.0: Probing EISA bus 0
[ 0.631765] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.631766] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.631767] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.631768] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.631769] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.631770] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.631770] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.631771] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.631772] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.631773] platform eisa.0: EISA: Detected 0 cards
[ 0.631776] intel_pstate: Intel P-state driver initializing
[ 0.632083] intel_pstate: HWP enabled
[ 0.632109] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.632112] EFI Variables Facility v0.08 2004-May-17
[ 0.642005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.684362] intel_pmc_core INT33A1:00: initialized
[ 0.684463] drop_monitor: Initializing network drop monitor service
[ 0.684602] NET: Registered protocol family 10
[ 0.692567] Segment Routing with IPv6
[ 0.692591] NET: Registered protocol family 17
[ 0.692638] Key type dns_resolver registered
[ 0.693101] RAS: Correctable Errors collector initialized.
[ 0.693187] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[ 0.693315] microcode: Microcode Update Driver: v2.2.
[ 0.693319] IPI shorthand broadcast: enabled
[ 0.693328] sched_clock: Marking stable (692415095, 895086)->(695479920, -2169739)
[ 0.693520] registered taskstats version 1
[ 0.693531] Loading compiled-in X.509 certificates
[ 0.695296] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[ 0.695320] zswap: loaded using pool lzo/zbud
[ 0.695377] Key type ._fscrypt registered
[ 0.695378] Key type .fscrypt registered
[ 0.702344] Key type big_key registered
[ 0.702349] Key type trusted registered
[ 0.705725] Key type encrypted registered
[ 0.705728] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.707469] integrity: Loading X.509 certificate: UEFI:db
[ 0.707508] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.707509] integrity: Loading X.509 certificate: UEFI:db
[ 0.707533] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.707533] integrity: Loading X.509 certificate: UEFI:db
[ 0.707550] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec'
[ 0.708035] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.709687] integrity: Loaded X.509 cert '... Secure Boot Module Signature key: ...'
[ 0.709688] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.709854] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.711520] ima: Allocated hash algorithm: sha1
[ 0.888297] ima: No architecture policies found
[ 0.888311] evm: Initialising EVM extended attributes:
[ 0.888312] evm: security.selinux
[ 0.888312] evm: security.SMACK64
[ 0.888313] evm: security.SMACK64EXEC
[ 0.888313] evm: security.SMACK64TRANSMUTE
[ 0.888314] evm: security.SMACK64MMAP
[ 0.888314] evm: security.apparmor
[ 0.888314] evm: security.ima
[ 0.888315] evm: security.capability
[ 0.888315] evm: HMAC attrs: 0x1
[ 0.889308] PM: Magic number: 0:893:766
[ 0.889348] acpi MSFT0001:01: hash matches
[ 0.889519] rtc_cmos 00:03: setting system clock to 2020-08-31T03:47:20 UTC (1598845640)
[ 0.889705] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[ 0.890539] Freeing unused decrypted memory: 2040K
[ 0.891002] Freeing unused kernel image memory: 2712K
[ 0.891028] Write protecting the kernel read-only data: 22528k
[ 0.891540] Freeing unused kernel image memory: 2008K
[ 0.891774] Freeing unused kernel image memory: 1192K
[ 0.899990] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.899992] x86/mm: Checking user space page tables
[ 0.908068] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.908073] Run /init as init process
[ 0.943654] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.022682] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found
[ 1.028853] ahci 0000:00:17.0: version 3.0
[ 1.029119] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 1.029122] ahci 0000:00:17.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 1.030830] scsi host0: ahci
[ 1.030878] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.032123] scsi host1: ahci
[ 1.032331] scsi host2: ahci
[ 1.032384] ata1: SATA max UDMA/133 abar m2048@0xb1235000 port 0xb1235100 irq 125
[ 1.032386] ata2: SATA max UDMA/133 abar m2048@0xb1235000 port 0xb1235180 irq 125
[ 1.032387] ata3: SATA max UDMA/133 abar m2048@0xb1235000 port 0xb1235200 irq 125
[ 1.033151] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.042446] libphy: r8169: probed
[ 1.042681] r8169 0000:01:00.0 eth0: RTL8168h/8111h, XX:XX:XX:XX:XX:XX, XID 541, IRQ 126
[ 1.042683] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.074475] r8169 0000:01:00.0 eno1: renamed from eth0
[ 1.093855] usb 1-4: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
[ 1.093856] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=...
[ 1.220305] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.352845] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.352866] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.352883] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.353684] ata1.00: ATA-9: WDC WD10JPVX-60JC3T1, 02.01A02, max UDMA/133
[ 1.353685] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.354608] ata1.00: configured for UDMA/133
[ 1.365295] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-60J 1A02 PQ: 0 ANSI: 5
[ 1.365493] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.365599] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.365601] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.365619] sd 0:0:0:0: [sda] Write Protect is off
[ 1.365620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.365704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.399410] usb 1-5: New USB device found, idVendor=04f2, idProduct=b5d5, bcdDevice=26.14
[ 1.399412] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=...
[ 1.399413] usb 1-5: Product: HP TrueVision HD Camera
[ 1.399414] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.399414] usb 1-5: SerialNumber: ...
[ 1.450743] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.451178] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.528153] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[ 1.556305] tsc: Refined TSC clocksource calibration: 2711.992 MHz
[ 1.556310] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27177f186d4, max_idle_ns: 440795313200 ns
[ 1.556539] clocksource: Switched to clocksource tsc
[ 1.680023] usb 1-6: New USB device found, idVendor=04f3, idProduct=250e, bcdDevice=57.22
[ 1.680025] usb 1-6: New USB device strings: Mfr=4, Product=14, SerialNumber=...
[ 1.680026] usb 1-6: Product: Touchscreen
[ 1.680027] usb 1-6: Manufacturer: ELAN
[ 1.687437] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.694168] usbcore: registered new interface driver usbhid
[ 1.694169] usbhid: USB HID core driver
[ 1.696313] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input5
[ 1.696400] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input6
[ 1.696439] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input7
[ 1.696521] hid-generic 0003:04F3:250E.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0
[ 1.846460] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[ 1.880542] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[ 1.880548] psmouse serio1: synaptics: Your touchpad (PNP: SYN3251 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX.
[ 1.948246] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2e800/0x400000, board id: 3320, fw id: 2659795
[ 1.993017] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 3.117817] fbcon: Taking over console
[ 3.117882] Console: switching to colour frame buffer device 170x48
[ 3.181853] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.260338] systemd[1]: Inserted module 'autofs4'
[ 5.570824] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.588408] systemd[1]: Detected architecture x86-64.
[ 5.629517] systemd[1]: Set hostname to ...
[ 5.646356] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[ 8.103520] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 8.825580] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock \xe2\x86\x92 /run/docker.sock; please update the unit file accordingly.
[ 9.111892] systemd[1]: Created slice system-modprobe.slice.
[ 9.112153] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.112366] systemd[1]: Created slice User and Session Slice.
[ 9.112419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.112633] systemd[1]: Set up automount ...
[ 9.112671] systemd[1]: Reached target User and Group Name Lookups.
[ 9.112688] systemd[1]: Reached target Remote File Systems.
[ 9.112697] systemd[1]: Reached target Slices.
[ 9.112800] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.112847] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.112996] systemd[1]: Listening on Journal Audit Socket.
[ 9.113059] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.113145] systemd[1]: Listening on Journal Socket.
[ 9.113217] systemd[1]: Listening on udev Control Socket.
[ 9.113262] systemd[1]: Listening on udev Kernel Socket.
[ 9.114077] systemd[1]: Mounting Huge Pages File System...
[ 9.114945] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.116250] systemd[1]: Mounting Kernel Debug File System...
[ 9.117397] systemd[1]: Mounting Kernel Trace File System...
[ 9.118974] systemd[1]: Starting Journal Service...
[ 9.120255] systemd[1]: Starting Set the console keyboard layout...
[ 9.121629] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 9.122713] systemd[1]: Starting Load Kernel Module drm...
[ 9.202135] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.202170] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 9.294176] systemd[1]: Starting Load Kernel Modules...
[ 9.295307] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 9.296187] systemd[1]: Starting udev Coldplug all Devices...
[ 9.297006] systemd[1]: Starting Uncomplicated firewall...
[ 9.298433] systemd[1]: Mounted Huge Pages File System.
[ 9.298534] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.298613] systemd[1]: Mounted Kernel Debug File System.
[ 9.298692] systemd[1]: Mounted Kernel Trace File System.
[ 9.395459] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 9.420978] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 9.422454] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 9.423198] systemd[1]: Activating swap /swapfile...
[ 9.502681] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 9.502752] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 9.503480] systemd[1]: Starting Load/Save Random Seed...
[ 9.504813] systemd[1]: Starting Create System Users...
[ 9.505001] systemd[1]: Started Journal Service.
[ 9.657506] systemd-journald[325]: Received client request to flush runtime journal.
[ 9.887727] Adding 4194300k swap on /swapfile. Priority:-2 extents:102 across:12492796k FS
[ 10.203500] lp: driver loaded but no devices found
[ 10.262736] ppdev: user-space parallel port driver
[ 15.801665] intel_rapl_common: Found RAPL domain package
[ 15.801666] intel_rapl_common: Found RAPL domain dram
[ 15.801734] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 15.812920] input: HP Wireless hotkeys as /devices/virtual/input/input9
[ 15.837678] acpi INT33D6:00: intel-vbtn: created platform device
[ 15.837890] intel-vbtn INT33D6:00: failed to read Intel Virtual Button driver
[ 16.096400] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 16.215902] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.216206] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.497028] checking generic (a0000000 408000) vs hw (a0000000 10000000)
[ 16.497029] fb0: switching to inteldrmfb from EFI VGA
[ 16.497097] Console: switching to colour dummy device 80x25
[ 16.497124] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 16.498078] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.498078] [drm] Driver supports precise vblank timestamp query.
[ 16.498543] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.511146] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 16.513338] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.514409] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 16.518837] fbcon: i915drmfb (fb0) is primary device
[ 16.518893] Console: switching to colour frame buffer device 170x48
[ 16.518911] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 16.555632] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 16.945578] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 17.973489] Intel(R) Wireless WiFi driver for Linux
[ 17.973490] Copyright(c) 2003- 2015 Intel Corporation
[ 18.003469] iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 18.292722] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 19.023726] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 19.023728] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 19.023728] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 19.023729] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 19.023729] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 19.023730] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 19.116573] intel_rapl_common: Found RAPL domain package
[ 19.116574] intel_rapl_common: Found RAPL domain core
[ 19.116575] intel_rapl_common: Found RAPL domain uncore
[ 19.116576] intel_rapl_common: Found RAPL domain dram
[ 19.488001] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[ 19.509055] iwlwifi 0000:02:00.0: base HW address: XX:XX:XX:XX:XX:XX
[ 19.540022] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 19.540857] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 19.543698] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[ 19.650576] cryptd: max_cpu_qlen set to 1000
[ 19.757613] AVX2 version of gcm_enc/dec engaged.
[ 19.757615] AES CTR mode by8 optimization enabled
[ 20.640188] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.640432] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 20.943778] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 20.943781] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.943783] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 20.943784] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.943785] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.943787] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 20.943788] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 20.962180] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 20.962218] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 20.962253] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 20.962288] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 20.962320] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 20.962353] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 20.962384] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 27.134200] Bluetooth: Core ver 2.22
[ 27.134218] NET: Registered protocol family 31
[ 27.134219] Bluetooth: HCI device and connection manager initialized
[ 27.134222] Bluetooth: HCI socket layer initialized
[ 27.134223] Bluetooth: L2CAP socket layer initialized
[ 27.134226] Bluetooth: SCO socket layer initialized
[ 27.278776] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input19
[ 27.278847] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input20
[ 27.278883] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:250E.0001/input/input21
[ 27.278958] hid-multitouch 0003:04F3:250E.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0
[ 27.366184] mc: Linux media interface: v0.10
[ 27.400375] usbcore: registered new interface driver btusb
[ 27.410738] Bluetooth: hci0: read Intel version: 370810225019140f34
[ 27.410740] Bluetooth: hci0: Intel device is already patched. patch num: 34
[ 27.490664] videodev: Linux video capture interface: v2.00
[ 28.173877] uvcvideo: Found UVC 1.00 device HP TrueVision HD Camera (04f2:b5d5)
[ 28.184770] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 28.184773] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 28.184774] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 28.184946] input: HP TrueVision HD Camera: HP Tru as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23
[ 28.185060] usbcore: registered new interface driver uvcvideo
[ 28.185060] USB Video Class driver (1.1.1)
[ 37.035524] vboxdrv: loading out-of-tree module taints kernel.
[ 37.042183] vboxdrv: Found 4 processor cores
[ 37.060062] vboxdrv: TSC mode is Invariant, tentative frequency 2711991674 Hz
[ 37.060063] vboxdrv: Successfully loaded version 6.0.22 (interface 0x00290008)
[ 37.361048] VBoxNetFlt: Successfully started.
[ 37.405008] VBoxNetAdp: Successfully started.
[ 38.854027] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.854029] Bluetooth: BNEP filters: protocol multicast
[ 38.854033] Bluetooth: BNEP socket layer initialized
[ 38.884107] NET: Registered protocol family 38
[ 42.264060] bpfilter: Loaded bpfilter_umh pid 1214
[ 42.264301] Started bpfilter
[ 45.296340] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 45.408868] r8169 0000:01:00.0 eno1: Link is Down
[ 48.491538] aufs 5.4.3-20200302
[ 48.813021] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[ 48.813033] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 50.120904] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 50.126532] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 50.131903] wlo1: authenticated
[ 50.132258] iwlwifi 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[ 50.132263] iwlwifi 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[ 50.135737] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 50.142930] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
[ 50.145084] wlo1: associated
[ 50.162803] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 50.448148] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 66.730951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 66.917484] Bridge firewalling registered
[ 68.139180] Initializing XFRM netlink socket
[ 80.454848] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 81.699936] rfkill: input handler disabled
[ 134.449285] rfkill: input handler enabled
[ 135.334132] Bluetooth: RFCOMM TTY layer initialized
[ 135.334146] Bluetooth: RFCOMM socket layer initialized
[ 135.334161] Bluetooth: RFCOMM ver 1.11
[ 142.683775] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 145.364676] rfkill: input handler disabled
[ 163.482952] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1043.426752] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 4290.925139] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[ 4291.074585] usb 1-1: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[ 4291.074591] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[ 4291.074595] usb 1-1: Product: Mass Storage Device
[ 4291.074598] usb 1-1: Manufacturer: Generic
[ 4291.074601] usb 1-1: SerialNumber: ...
[ 4291.749165] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 4291.749306] scsi host3: usb-storage 1-1:1.0
[ 4291.749405] usbcore: registered new interface driver usb-storage
[ 4291.771098] usbcore: registered new interface driver uas
[ 4292.757947] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[ 4292.758919] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4293.008136] sd 3:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 4293.008384] sd 3:0:0:0: [sdb] Write Protect is off
[ 4293.008389] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4293.008541] sd 3:0:0:0: [sdb] No Caching mode page found
[ 4293.008549] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4293.028050] sdb: sdb1 sdb2
[ 4293.029993] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4293.658010] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4293.790272] EXT4-fs (sdb2): 1 orphan inode deleted
[ 4293.790277] EXT4-fs (sdb2): recovery complete
[ 4293.810440] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5028.654723] sdb: sdb1 sdb2
[ 5099.232519] usb 1-1: USB disconnect, device number 5
[ 6064.444291] r8169 0000:01:00.0 eno1: Link is Down
[ 6940.038953] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 7187.003749] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7187.009178] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7187.114209] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7187.122171] wlo1: authenticated
[ 7187.122717] iwlwifi 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[ 7187.122724] iwlwifi 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[ 7187.126294] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 7187.230640] wlo1: associate with XX:XX:XX:XX:XX:XX (try 2/3)
[ 7187.338684] wlo1: associate with XX:XX:XX:XX:XX:XX (try 3/3)
[ 7187.446267] wlo1: association with XX:XX:XX:XX:XX:XX timed out
[ 7188.580895] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7188.585939] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7188.690676] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7188.796826] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7188.898680] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7198.337239] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7198.341955] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7198.446291] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7198.552706] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7198.654636] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7206.696885] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7206.702107] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7206.806740] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7206.912841] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7207.018686] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7236.245477] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7236.250542] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7236.354307] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7236.460885] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7236.566729] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7264.039863] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7264.045561] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7264.154269] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7264.260013] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7264.362739] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7292.045368] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7292.052333] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7292.055854] wlo1: authenticated
[ 7292.058343] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 7292.066097] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1)
[ 7292.068671] wlo1: associated
[ 7292.270856] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 7319.193714] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7320.390011] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7320.396052] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7320.498801] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7320.604527] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7320.706755] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7327.863944] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7327.869146] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7327.974829] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7328.081028] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7328.186801] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7343.768578] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7343.773845] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7343.878824] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7343.984674] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7344.086818] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7363.004542] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7363.010560] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7363.114884] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7363.220795] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7363.322435] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7374.418859] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7374.423611] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7374.530417] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7374.636123] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7374.738456] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7388.188715] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7388.194034] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7388.298437] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7388.404257] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7388.506696] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7399.545523] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7399.551134] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7399.654869] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7399.760829] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7399.862937] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7441.114157] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7441.118902] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7441.222955] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7441.328992] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7441.431025] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7452.474655] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7452.479287] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7452.582949] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7452.688981] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7452.794992] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7493.115833] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7493.121387] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7493.227051] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 7493.332826] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 7493.435039] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 7738.765133] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 7746.172905] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 7746.178549] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 7746.184288] wlo1: authenticated
[ 7746.186853] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 7746.193633] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1)
[ 7746.197006] wlo1: associated
[ 7746.407011] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 8070.905469] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8075.088960] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8075.094502] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8075.099445] wlo1: authenticated
[ 8075.099859] iwlwifi 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[ 8075.099864] iwlwifi 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[ 8075.103281] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 8075.215804] wlo1: associate with XX:XX:XX:XX:XX:XX (try 2/3)
[ 8075.319380] wlo1: associate with XX:XX:XX:XX:XX:XX (try 3/3)
[ 8075.427773] wlo1: association with XX:XX:XX:XX:XX:XX timed out
[ 8088.586159] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8088.591613] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8088.695813] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8088.801905] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8088.903754] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8090.434760] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8090.440933] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8090.551364] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8090.657167] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8090.759376] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8094.685099] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8094.690152] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8094.795371] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8094.901792] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8095.007784] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8113.252320] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8113.257438] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8113.363842] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8113.469942] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8113.575668] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8122.146105] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8122.152761] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8122.154634] wlo1: authenticated
[ 8122.159405] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 8122.167379] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1)
[ 8122.170171] wlo1: associated
[ 8122.372625] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 8140.755628] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8151.176535] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8151.180720] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8151.283817] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8151.392018] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8151.495853] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8158.641250] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8158.646339] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8158.751779] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8158.856867] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8158.959860] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8162.389394] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8162.395635] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8162.499919] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8162.605977] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8162.711868] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8193.024451] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[ 8231.150352] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8231.155327] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8231.263505] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8231.369198] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8231.471541] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8241.633503] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8241.638868] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8241.743542] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8241.850001] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8241.951983] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8262.023052] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8262.029008] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8262.132000] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8262.238166] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8262.340001] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8285.406414] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8285.411459] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8285.516047] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8285.622033] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8285.728011] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8363.508191] r8169 0000:01:00.0 eno1: Link is Down
[ 8367.641410] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[ 8722.141426] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8722.146606] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8722.252528] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8722.358218] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8722.464564] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8741.414876] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8741.419737] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8741.524550] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8741.630458] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8741.732606] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8749.095342] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8749.101308] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8749.204619] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8749.310109] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8749.412565] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8779.085521] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8779.089918] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8779.127293] wlo1: authenticated
[ 8779.127488] iwlwifi 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[ 8779.127490] iwlwifi 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[ 8779.128140] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 8779.268644] wlo1: associate with XX:XX:XX:XX:XX:XX (try 2/3)
[ 8779.372618] wlo1: associate with XX:XX:XX:XX:XX:XX (try 3/3)
[ 8779.480606] wlo1: association with XX:XX:XX:XX:XX:XX timed out
[ 8790.519449] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8790.523659] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8790.628614] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8790.734512] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8790.836178] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8805.128702] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8805.133498] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8805.240681] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8805.346586] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8805.448648] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8818.377102] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8818.382780] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8818.488669] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8818.594612] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8818.696663] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 8829.784443] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 8829.790615] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 8829.896453] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 8830.002419] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 8830.104669] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[ 9696.130266] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[ 9696.134106] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 9696.237714] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 9696.343665] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[ 9696.445743] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[10318.131084] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10318.138222] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10318.171312] wlo1: authenticated
[10318.171527] iwlwifi 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
[10318.171530] iwlwifi 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
[10318.173941] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[10318.282281] wlo1: associate with XX:XX:XX:XX:XX:XX (try 2/3)
[10318.386316] wlo1: associate with XX:XX:XX:XX:XX:XX (try 3/3)
[10318.494329] wlo1: association with XX:XX:XX:XX:XX:XX timed out
[10329.513941] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10329.517836] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10329.622248] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[10329.728179] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[10329.830273] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[10346.025817] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10346.030741] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10346.134190] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[10346.240150] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[10346.342139] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[10357.370810] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10357.376477] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10357.482159] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[10357.587714] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[10357.690132] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[10368.754039] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10368.760249] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10368.866066] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[10368.971256] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[10369.074105] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[10394.279249] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[10394.285401] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[10394.393652] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[10394.499919] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[10394.602026] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11202.016061] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11202.020570] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11202.124357] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11202.230612] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11202.332829] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11215.273490] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11215.277477] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11215.380836] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11215.486711] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11215.588409] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11227.962353] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11227.969193] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11228.072853] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11228.178704] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11228.280829] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11239.186010] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11239.190320] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11239.292846] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11239.398713] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11239.500822] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11255.973971] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11255.980605] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11256.084802] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11256.190480] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11256.292841] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11267.316299] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11267.321078] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11267.428858] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11267.534752] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11267.644815] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11281.960416] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11281.965103] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11282.068807] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11282.174713] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11282.280732] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11293.188932] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11293.193610] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11293.296842] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11293.402757] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11293.504817] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11587.865821] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11587.870242] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11587.976794] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11588.082747] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11588.184872] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11601.114269] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11601.118632] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11601.224808] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11601.330697] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11601.432883] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11619.139095] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11619.144406] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11619.252429] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11619.358723] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11619.460827] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11630.479889] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11630.483978] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11630.592666] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11630.698749] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11630.804818] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11640.975540] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11640.982218] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11641.088806] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11641.194723] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11641.296817] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11652.196160] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11652.199988] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11652.308350] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11652.413738] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11652.520310] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11666.962410] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[11666.967946] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[11667.072440] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[11667.178750] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[11667.280836] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[11947.464916] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[11947.614216] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[11947.614222] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[11947.614226] usb 1-2: Product: Mass Storage Device
[11947.614229] usb 1-2: Manufacturer: Generic
[11947.614232] usb 1-2: SerialNumber: ...
[11947.615884] usb-storage 1-2:1.0: USB Mass Storage device detected
[11947.616604] scsi host3: usb-storage 1-2:1.0
[11948.633943] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[11948.635059] sd 3:0:0:0: Attached scsi generic sg1 type 0
[11948.914824] sd 3:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[11948.915077] sd 3:0:0:0: [sdb] Write Protect is off
[11948.915083] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[11948.915320] sd 3:0:0:0: [sdb] No Caching mode page found
[11948.915329] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[11948.931397] sdb: sdb1 sdb2
[11948.933130] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[11949.484786] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[12355.998514] sdb: sdb1 sdb2
[13072.594419] usb 1-2: USB disconnect, device number 6
[13563.119029] usb 1-1: new high-speed USB device number 7 using xhci_hcd
[13563.268471] usb 1-1: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[13563.268477] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[13563.268480] usb 1-1: Product: Mass Storage Device
[13563.268483] usb 1-1: Manufacturer: Generic
[13563.268486] usb 1-1: SerialNumber: ...
[13563.270010] usb-storage 1-1:1.0: USB Mass Storage device detected
[13563.270254] scsi host3: usb-storage 1-1:1.0
[13564.283597] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[13564.284763] sd 3:0:0:0: Attached scsi generic sg1 type 0
[13564.454886] sd 3:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[13564.455204] sd 3:0:0:0: [sdb] Write Protect is off
[13564.455210] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[13564.455369] sd 3:0:0:0: [sdb] No Caching mode page found
[13564.455377] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[13564.473389] sdb: sdb1 sdb2
[13564.475189] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[13564.999030] ISO 9660 Extensions: Microsoft Joliet Level 3
[13565.001694] ISO 9660 Extensions: Microsoft Joliet Level 3
[13565.025965] ISO 9660 Extensions: RRIP_1991A
[13849.565719] sdb: sdb1 sdb2
[13902.097232] usb 1-1: USB disconnect, device number 7
[14109.559539] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[14109.708798] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[14109.708805] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[14109.708809] usb 1-2: Product: Mass Storage Device
[14109.708812] usb 1-2: Manufacturer: Generic
[14109.708815] usb 1-2: SerialNumber: ...
[14109.710290] usb-storage 1-2:1.0: USB Mass Storage device detected
[14109.712696] scsi host3: usb-storage 1-2:1.0
[14110.716351] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[14110.716993] sd 3:0:0:0: Attached scsi generic sg1 type 0
[14126.004710] usb 1-2: USB disconnect, device number 8
[14126.023837] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[14126.023839] sd 3:0:0:0: [sdb] Sense not available.
[14126.023842] sd 3:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[14126.023843] sd 3:0:0:0: [sdb] 0-byte physical blocks
[14126.023895] sd 3:0:0:0: [sdb] Write Protect is off
[14126.023897] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[14126.023946] sd 3:0:0:0: [sdb] Asking for cache data failed
[14126.023950] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14126.044126] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[14126.044132] sd 3:0:0:0: [sdb] Sense not available.
[14126.044194] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[14134.751548] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[14134.900993] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[14134.901000] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[14134.901004] usb 1-2: Product: Mass Storage Device
[14134.901007] usb 1-2: Manufacturer: Generic
[14134.901010] usb 1-2: SerialNumber: ...
[14134.902606] usb-storage 1-2:1.0: USB Mass Storage device detected
[14134.902884] scsi host3: usb-storage 1-2:1.0
[14135.932563] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[14135.933673] sd 3:0:0:0: Attached scsi generic sg1 type 0
[14136.094427] sd 3:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[14136.094605] sd 3:0:0:0: [sdb] Write Protect is off
[14136.094609] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[14136.094753] sd 3:0:0:0: [sdb] No Caching mode page found
[14136.094761] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14136.109344] sdb: sdb1 sdb2
[14136.111237] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[14136.673120] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[14137.729088] EXT4-fs (sdb2): recovery complete
[14137.778333] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[14397.045872] sdb: sdb1 sdb2 sdb3
[14496.579624] usb 1-2: USB disconnect, device number 9
[17807.680445] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[17807.680447] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[17807.703017] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[17807.703019] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21144.573856] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21144.573865] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21144.585884] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21144.585892] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21145.061626] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21145.061628] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21145.071606] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21145.071607] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21164.498259] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21164.498266] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21164.509359] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21164.509365] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21165.612656] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21165.612665] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21165.623487] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21165.623494] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21414.344480] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21414.344488] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21414.354237] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21414.354245] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21448.433385] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[21448.433394] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[21448.445012] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[21448.445022] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22663.824408] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[22663.834569] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[22664.411594] r8169 0000:01:00.0 eno1: Link is Down
[22665.132073] PM: suspend entry (deep)
[22665.214518] Filesystems sync: 0.082 seconds
[22665.215513] Freezing user space processes ... (elapsed 0.004 seconds) done.
[22665.219897] OOM killer disabled.
[22665.219898] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[22665.221556] printk: Suspending console(s) (use no_console_suspend to debug)
[22665.241811] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[22665.318463] sd 0:0:0:0: [sda] Stopping disk
[22665.926977] ACPI: EC: interrupt blocked
[22665.970328] ACPI: Preparing to enter system sleep state S3
[22665.974557] ACPI: EC: event blocked
[22665.974559] ACPI: EC: EC stopped
[22665.974560] PM: Saving platform NVS memory
[22665.974679] Disabling non-boot CPUs ...
[22665.975341] IRQ 128: no longer affine to CPU1
[22665.976377] smpboot: CPU 1 is now offline
[22665.981324] IRQ 129: no longer affine to CPU2
[22665.982379] smpboot: CPU 2 is now offline
[22665.987387] IRQ 122: no longer affine to CPU3
[22665.988423] smpboot: CPU 3 is now offline
[22665.995505] ACPI: Low-level resume complete
[22665.995599] ACPI: EC: EC started
[22665.995600] PM: Restoring platform NVS memory
[22665.998240] Enabling non-boot CPUs ...
[22665.998286] x86: Booting SMP configuration:
[22665.998287] smpboot: Booting Node 0 Processor 1 APIC 0x2
[22666.000346] microcode: sig=0x806e9, pf=0x80, revision=0x62
[22666.002155] microcode: updated to revision 0xd6, date = 2020-04-27
[22666.002490] CPU1 is up
[22666.002516] smpboot: Booting Node 0 Processor 2 APIC 0x1
[22666.002830] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[22666.003146] CPU2 is up
[22666.003173] smpboot: Booting Node 0 Processor 3 APIC 0x3
[22666.003742] CPU3 is up
[22666.005140] ACPI: Waking up from system sleep state S3
[22666.010398] ACPI: button: The lid device is not compliant to SW_LID.
[22666.011244] ACPI: EC: interrupt unblocked
[22666.057549] ACPI: EC: event unblocked
[22666.059958] sd 0:0:0:0: [sda] Starting disk
[22666.305327] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[22666.374000] ata3: SATA link down (SStatus 4 SControl 300)
[22666.374034] ata2: SATA link down (SStatus 0 SControl 300)
[22666.581171] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[22666.796374] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[22666.828072] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[22666.856968] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[22667.013528] acpi LNXPOWER:13: Turning OFF
[22667.013727] acpi LNXPOWER:12: Turning OFF
[22667.013919] acpi LNXPOWER:11: Turning OFF
[22667.014107] acpi LNXPOWER:10: Turning OFF
[22667.014295] acpi LNXPOWER:0f: Turning OFF
[22667.014485] acpi LNXPOWER:0e: Turning OFF
[22667.014674] acpi LNXPOWER:0d: Turning OFF
[22667.014865] acpi LNXPOWER:0c: Turning OFF
[22667.015055] acpi LNXPOWER:0b: Turning OFF
[22667.015245] acpi LNXPOWER:0a: Turning OFF
[22667.015434] acpi LNXPOWER:09: Turning OFF
[22667.015623] acpi LNXPOWER:08: Turning OFF
[22667.015815] acpi LNXPOWER:07: Turning OFF
[22667.016006] acpi LNXPOWER:06: Turning OFF
[22667.016195] acpi LNXPOWER:05: Turning OFF
[22667.016387] acpi LNXPOWER:04: Turning OFF
[22667.016602] acpi LNXPOWER:03: Turning OFF
[22667.016791] acpi LNXPOWER:02: Turning OFF
[22667.016979] acpi LNXPOWER:01: Turning OFF
[22667.017168] acpi LNXPOWER:00: Turning OFF
[22667.017311] OOM killer enabled.
[22667.017313] Restarting tasks ...
[22667.022480] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[22667.024364] done.
[22667.045264] Bluetooth: hci0: read Intel version: 370810225019140f00
[22667.101123] PM: suspend exit
[22668.892976] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[22669.039488] ata1.00: configured for UDMA/133
[22669.234988] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[22669.435741] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[22669.541742] r8169 0000:01:00.0 eno1: Link is Down
[22669.627341] Bluetooth: hci0: Intel firmware patch completed and activated
[22673.771400] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[22673.771432] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[22697.044210] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22697.049947] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22697.153039] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22697.263287] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22697.364988] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22704.250432] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22704.255778] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22704.361040] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22704.466967] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22704.569048] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22706.090935] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22706.095757] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22706.201064] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22706.306960] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22706.409033] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22708.082594] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[22708.082604] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.092660] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[22708.092669] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.240434] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[22708.240438] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.250822] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[22708.250826] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.389226] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[22708.389227] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.400367] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[22708.400369] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.535945] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[22708.535950] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22708.546734] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[22708.546739] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22709.672403] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[22709.672413] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22709.682152] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[22709.682162] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[22716.612602] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22716.616941] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22716.721046] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22716.826989] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22716.929059] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22723.742615] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22723.746793] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22723.853082] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22723.958940] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22724.060667] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22734.971052] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22734.976393] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22735.081057] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22735.190605] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22735.292638] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22749.171070] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[22749.175508] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[22749.280669] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[22749.386710] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[22749.489073] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[22822.246490] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[22905.621594] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[23092.021377] usb 1-2: new high-speed USB device number 10 using xhci_hcd
[23092.170841] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[23092.170848] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=...
[23092.170852] usb 1-2: Product: Mass Storage Device
[23092.170855] usb 1-2: Manufacturer: Generic
[23092.170858] usb 1-2: SerialNumber: ...
[23092.176107] usb-storage 1-2:1.0: USB Mass Storage device detected
[23092.176495] scsi host3: usb-storage 1-2:1.0
[23093.190344] scsi 3:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[23093.191418] sd 3:0:0:0: Attached scsi generic sg1 type 0
[23093.471077] sd 3:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[23093.471363] sd 3:0:0:0: [sdb] Write Protect is off
[23093.471369] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[23093.471631] sd 3:0:0:0: [sdb] No Caching mode page found
[23093.471640] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[23093.488010] sdb: sdb1 sdb2 sdb3
[23093.489974] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[23094.207855] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[23094.207873] ext4 filesystem being mounted at /media/XXXXXXXXXX supports timestamps until 2038 (0x7fffffff)
[23094.328034] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[23094.331209] XFS (sdb3): Mounting V5 Filesystem
[23094.842234] XFS (sdb3): Ending clean mount
[23095.479841] xfs filesystem being mounted at /media/XXXXXX supports timestamps until 2038 (0x7fffffff)
[23105.574660] XFS (sdb3): Unmounting Filesystem
[23403.975532] sdb: sdb1 sdb2
[23739.061859] usb 1-2: USB disconnect, device number 10
[25208.151140] i915 0000:00:02.0: HDMI-A-1: EDID is invalid:
[25208.151147] [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[25208.151149] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151151] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151153] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151155] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151156] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151158] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[25208.151160] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[48261.176174] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[48261.184371] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[48261.275395] r8169 0000:01:00.0 eno1: Link is Down
[48261.418295] PM: suspend entry (deep)
[48261.736463] Filesystems sync: 0.318 seconds
[48261.737935] Freezing user space processes ... (elapsed 0.005 seconds) done.
[48261.743827] OOM killer disabled.
[48261.743828] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[48261.745703] printk: Suspending console(s) (use no_console_suspend to debug)
[48261.776735] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[48261.903963] sd 0:0:0:0: [sda] Stopping disk
[48262.493577] ACPI: EC: interrupt blocked
[48262.536881] ACPI: Preparing to enter system sleep state S3
[48262.540756] ACPI: EC: event blocked
[48262.540758] ACPI: EC: EC stopped
[48262.540759] PM: Saving platform NVS memory
[48262.540880] Disabling non-boot CPUs ...
[48262.541638] IRQ 128: no longer affine to CPU1
[48262.543456] smpboot: CPU 1 is now offline
[48262.548514] smpboot: CPU 2 is now offline
[48262.552468] IRQ 122: no longer affine to CPU3
[48262.552478] IRQ 123: no longer affine to CPU3
[48262.552491] IRQ 129: no longer affine to CPU3
[48262.553531] smpboot: CPU 3 is now offline
[48262.559679] ACPI: Low-level resume complete
[48262.559773] ACPI: EC: EC started
[48262.559774] PM: Restoring platform NVS memory
[48262.562272] Enabling non-boot CPUs ...
[48262.562321] x86: Booting SMP configuration:
[48262.562322] smpboot: Booting Node 0 Processor 1 APIC 0x2
[48262.562670] microcode: sig=0x806e9, pf=0x80, revision=0x62
[48262.564796] CPU1 is up
[48262.564826] smpboot: Booting Node 0 Processor 2 APIC 0x1
[48262.565146] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[48262.565474] CPU2 is up
[48262.565501] smpboot: Booting Node 0 Processor 3 APIC 0x3
[48262.566082] CPU3 is up
[48262.567534] ACPI: Waking up from system sleep state S3
[48262.572332] ACPI: EC: interrupt unblocked
[48262.616427] ACPI: EC: event unblocked
[48262.617577] sd 0:0:0:0: [sda] Starting disk
[48262.863228] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[48262.929894] ata3: SATA link down (SStatus 4 SControl 300)
[48262.930165] ata2: SATA link down (SStatus 0 SControl 300)
[48263.143296] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[48263.419274] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[48263.573428] acpi LNXPOWER:13: Turning OFF
[48263.573486] acpi LNXPOWER:12: Turning OFF
[48263.573541] acpi LNXPOWER:11: Turning OFF
[48263.573596] acpi LNXPOWER:10: Turning OFF
[48263.573651] acpi LNXPOWER:0f: Turning OFF
[48263.573706] acpi LNXPOWER:0e: Turning OFF
[48263.573761] acpi LNXPOWER:0d: Turning OFF
[48263.573816] acpi LNXPOWER:0c: Turning OFF
[48263.573870] acpi LNXPOWER:0b: Turning OFF
[48263.573925] acpi LNXPOWER:0a: Turning OFF
[48263.573980] acpi LNXPOWER:09: Turning OFF
[48263.574035] acpi LNXPOWER:08: Turning OFF
[48263.574090] acpi LNXPOWER:07: Turning OFF
[48263.574146] acpi LNXPOWER:06: Turning OFF
[48263.574200] acpi LNXPOWER:05: Turning OFF
[48263.574256] acpi LNXPOWER:04: Turning OFF
[48263.574311] acpi LNXPOWER:03: Turning OFF
[48263.574365] acpi LNXPOWER:02: Turning OFF
[48263.574419] acpi LNXPOWER:01: Turning OFF
[48263.574473] acpi LNXPOWER:00: Turning OFF
[48263.574514] OOM killer enabled.
[48263.574514] Restarting tasks ... done.
[48263.592088] Bluetooth: hci0: read Intel version: 370810225019140f00
[48263.592092] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[48263.653126] thermal thermal_zone6: failed to read out thermal zone (-61)
[48263.660560] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[48263.707083] PM: suspend exit
[48263.838119] Bluetooth: hci0: Intel firmware patch completed and activated
[48263.940533] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[48263.970660] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[48265.463104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[48265.611959] ata1.00: configured for UDMA/133
[48265.881516] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[48265.984233] r8169 0000:01:00.0 eno1: Link is Down
[48270.149050] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[48270.149082] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[59119.833276] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[61296.712508] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[66396.548083] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[66396.558888] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[66396.734639] r8169 0000:01:00.0 eno1: Link is Down
[66397.167465] PM: suspend entry (deep)
[66397.461810] Filesystems sync: 0.294 seconds
[66397.463058] Freezing user space processes ... (elapsed 0.005 seconds) done.
[66397.468366] OOM killer disabled.
[66397.468367] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[66397.469827] printk: Suspending console(s) (use no_console_suspend to debug)
[66397.487134] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[66397.561407] sd 0:0:0:0: [sda] Stopping disk
[66398.179987] ACPI: EC: interrupt blocked
[66398.223308] ACPI: Preparing to enter system sleep state S3
[66398.227185] ACPI: EC: event blocked
[66398.227187] ACPI: EC: EC stopped
[66398.227188] PM: Saving platform NVS memory
[66398.227308] Disabling non-boot CPUs ...
[66398.228006] IRQ 128: no longer affine to CPU1
[66398.229041] smpboot: CPU 1 is now offline
[66398.233933] smpboot: CPU 2 is now offline
[66398.238270] IRQ 122: no longer affine to CPU3
[66398.238278] IRQ 123: no longer affine to CPU3
[66398.238292] IRQ 129: no longer affine to CPU3
[66398.239324] smpboot: CPU 3 is now offline
[66398.244861] ACPI: Low-level resume complete
[66398.244954] ACPI: EC: EC started
[66398.244954] PM: Restoring platform NVS memory
[66398.247467] Enabling non-boot CPUs ...
[66398.247516] x86: Booting SMP configuration:
[66398.247517] smpboot: Booting Node 0 Processor 1 APIC 0x2
[66398.247864] microcode: sig=0x806e9, pf=0x80, revision=0x62
[66398.249986] CPU1 is up
[66398.250015] smpboot: Booting Node 0 Processor 2 APIC 0x1
[66398.250324] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[66398.250656] CPU2 is up
[66398.250683] smpboot: Booting Node 0 Processor 3 APIC 0x3
[66398.251271] CPU3 is up
[66398.252655] ACPI: Waking up from system sleep state S3
[66398.257674] ACPI: EC: interrupt unblocked
[66398.303643] ACPI: EC: event unblocked
[66398.304971] sd 0:0:0:0: [sda] Starting disk
[66398.553641] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[66398.619815] ata3: SATA link down (SStatus 4 SControl 300)
[66398.620537] ata2: SATA link down (SStatus 0 SControl 300)
[66398.837692] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[66399.012242] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[66399.042075] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[66399.121655] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[66399.275552] acpi LNXPOWER:13: Turning OFF
[66399.275682] acpi LNXPOWER:12: Turning OFF
[66399.275814] acpi LNXPOWER:11: Turning OFF
[66399.275929] acpi LNXPOWER:10: Turning OFF
[66399.276053] acpi LNXPOWER:0f: Turning OFF
[66399.276176] acpi LNXPOWER:0e: Turning OFF
[66399.276298] acpi LNXPOWER:0d: Turning OFF
[66399.276428] acpi LNXPOWER:0c: Turning OFF
[66399.276552] acpi LNXPOWER:0b: Turning OFF
[66399.276675] acpi LNXPOWER:0a: Turning OFF
[66399.276792] acpi LNXPOWER:09: Turning OFF
[66399.276922] acpi LNXPOWER:08: Turning OFF
[66399.277046] acpi LNXPOWER:07: Turning OFF
[66399.277169] acpi LNXPOWER:06: Turning OFF
[66399.277299] acpi LNXPOWER:05: Turning OFF
[66399.277445] acpi LNXPOWER:04: Turning OFF
[66399.277569] acpi LNXPOWER:03: Turning OFF
[66399.277685] acpi LNXPOWER:02: Turning OFF
[66399.277808] acpi LNXPOWER:01: Turning OFF
[66399.277932] acpi LNXPOWER:00: Turning OFF
[66399.278014] OOM killer enabled.
[66399.278017] Restarting tasks ...
[66399.283787] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[66399.297658] Bluetooth: hci0: read Intel version: 370810225019140f00
[66399.297726] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[66399.310652] done.
[66399.311695] thermal thermal_zone6: failed to read out thermal zone (-61)
[66399.365663] PM: suspend exit
[66399.645226] Bluetooth: hci0: Intel firmware patch completed and activated
[66401.213913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[66401.357668] ata1.00: configured for UDMA/133
[66401.517917] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[66401.622713] r8169 0000:01:00.0 eno1: Link is Down
[66405.830011] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[66405.830043] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[68269.850734] docker0: port 1(veth2d2da9f) entered blocking state
[68269.850737] docker0: port 1(veth2d2da9f) entered disabled state
[68269.850840] device veth2d2da9f entered promiscuous mode
[68271.759121] eth0: renamed from veth92304b8
[68271.858249] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[68271.858264] IPv6: ADDRCONF(NETDEV_CHANGE): veth2d2da9f: link becomes ready
[68271.858306] docker0: port 1(veth2d2da9f) entered blocking state
[68271.858307] docker0: port 1(veth2d2da9f) entered forwarding state
[68271.858341] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[83106.113178] znc[36182]: segfault at 8 ip 000056077645fa82 sp 00007fff5a301de0 error 4 in znc[560776400000+12d000]
[83106.113243] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[83130.047995] znc[42799]: segfault at 8 ip 0000563c84f05a82 sp 00007ffe78eaaa50 error 4 in znc[563c84ea6000+12d000]
[83130.048000] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[83319.049909] docker0: port 2(vethede7442) entered blocking state
[83319.049915] docker0: port 2(vethede7442) entered disabled state
[83319.055765] device vethede7442 entered promiscuous mode
[83319.814408] eth0: renamed from veth1a9ef42
[83319.912030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[83319.912046] IPv6: ADDRCONF(NETDEV_CHANGE): vethede7442: link becomes ready
[83319.912097] docker0: port 2(vethede7442) entered blocking state
[83319.912099] docker0: port 2(vethede7442) entered forwarding state
[83642.787809] znc[48559]: segfault at 8 ip 000055faef623a82 sp 00007ffebbe1d800 error 4 in znc[55faef5c4000+12d000]
[83642.787815] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[90762.006183] znc[49870]: segfault at 8 ip 00005651b37f3a82 sp 00007ffe4805ba10 error 4 in znc[5651b3794000+12d000]
[90762.006188] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[91494.005610] znc[50158]: segfault at 8 ip 00005583a8675a82 sp 00007fff8645a940 error 4 in znc[5583a8616000+12d000]
[91494.005615] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[93604.525481] docker0: port 2(vethede7442) entered disabled state
[93604.526440] veth1a9ef42: renamed from eth0
[93604.901695] docker0: port 2(vethede7442) entered disabled state
[93604.909332] device vethede7442 left promiscuous mode
[93604.909342] docker0: port 2(vethede7442) entered disabled state
[93907.270358] docker0: port 2(veth5ff6c95) entered blocking state
[93907.270360] docker0: port 2(veth5ff6c95) entered disabled state
[93907.270412] device veth5ff6c95 entered promiscuous mode
[93907.270475] docker0: port 2(veth5ff6c95) entered blocking state
[93907.270477] docker0: port 2(veth5ff6c95) entered forwarding state
[93907.272272] docker0: port 2(veth5ff6c95) entered disabled state
[93908.109266] eth0: renamed from veth1409d0e
[93908.238860] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[93908.238895] IPv6: ADDRCONF(NETDEV_CHANGE): veth5ff6c95: link becomes ready
[93908.238971] docker0: port 2(veth5ff6c95) entered blocking state
[93908.238973] docker0: port 2(veth5ff6c95) entered forwarding state
[93995.459419] znc[66668]: segfault at 8 ip 00005610ed11ea82 sp 00007ffd7698a9c0 error 4 in znc[5610ed0bf000+12d000]
[93995.459443] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[95294.584711] docker0: port 2(veth5ff6c95) entered disabled state
[95294.585572] veth1409d0e: renamed from eth0
[95294.796238] docker0: port 2(veth5ff6c95) entered disabled state
[95294.801753] device veth5ff6c95 left promiscuous mode
[95294.801766] docker0: port 2(veth5ff6c95) entered disabled state
[96087.960878] znc[67965]: segfault at 0 ip 0000000000000000 sp 00007ffc3fe1b198 error 14 in znc[560274b76000+3c000]
[96087.960894] Code: Bad RIP value.
[96123.531986] znc[68544]: segfault at 8 ip 0000555896919a82 sp 00007ffec7fd4e20 error 4 in znc[5558968ba000+12d000]
[96123.532004] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[96777.214082] znc[68651]: segfault at 8 ip 0000560f97279a82 sp 00007ffe9aa87e40 error 4 in znc[560f9721a000+12d000]
[96777.214103] Code: 54 49 89 d4 55 53 48 89 fb 48 89 f7 4c 8d 73 10 e8 b3 09 fa ff 4c 89 33 48 89 df 48 c7 43 08 00 00 00 00 48 89 c5 c6 43 10 00 <49> 8b 74 24 08 48 01 c6 e8 e1 16 fa ff 48 b8 ff ff ff ff ff ff ff
[97220.229284] znc[69792]: segfault at 0 ip 0000000000000000 sp 00007ffe4b073558 error 14 in znc[562b86fec000+3c000]
[97220.229304] Code: Bad RIP value.
[100769.402632] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[100773.597617] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[100778.393258] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[100793.477133] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[100793.482670] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[100793.486801] wlo1: authenticated
[100793.489998] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[100793.493986] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[100793.499171] wlo1: associated
[100793.509783] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[100793.548248] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[100795.435929] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[101048.253107] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[101057.575889] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[101952.522308] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[101958.362839] debugfs: File 'le_min_key_size' in directory 'hci0' already present!
[101958.362849] debugfs: File 'le_max_key_size' in directory 'hci0' already present!
[101962.835883] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[101962.839892] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[101962.843559] wlo1: authenticated
[101962.845518] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[101962.849533] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[101962.857328] wlo1: associated
[101962.875724] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[101962.885177] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[101967.203913] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[101972.296645] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[102106.019602] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[102109.946339] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[102109.950522] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[102109.956096] wlo1: authenticated
[102109.957465] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[102109.961616] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[102109.975756] wlo1: associated
[102109.985740] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[102110.038057] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[102356.631211] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[106504.058709] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[106504.059748] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[106504.060809] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[106504.061858] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[106504.062909] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[106504.062914] psmouse serio1: issuing reconnect request
[106504.751074] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[106504.780660] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[106773.244263] traps: znc[70008] general protection fault ip:5650177c8a88 sp:7ffccb15cff0 error:0 in znc[565017715000+12d000]
[107140.738587] znc[74683]: segfault at 128 ip 00005591c0e34727 sp 00007ffff082b5d0 error 4 in znc[5591c0d69000+12d000]
[107140.738612] Code: 00 00 00 48 89 e2 e8 68 54 f3 ff ba ff ff ff ff 85 c0 75 04 8b 54 24 20 89 d0 48 81 c4 98 00 00 00 c3 90 48 81 ec 98 00 00 00 <48> 8b 37 bf 01 00 00 00 48 89 e2 e8 39 54 f3 ff 85 c0 0f 94 c0 48
[112709.606606] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[116343.913557] docker0: port 1(veth2d2da9f) entered disabled state
[116343.915620] veth92304b8: renamed from eth0
[116344.201488] docker0: port 1(veth2d2da9f) entered disabled state
[116344.208014] device veth2d2da9f left promiscuous mode
[116344.208028] docker0: port 1(veth2d2da9f) entered disabled state
[116538.247971] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[116538.247979] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[116538.257684] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[116538.257692] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[125260.673101] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[125260.685112] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[125260.852359] r8169 0000:01:00.0 eno1: Link is Down
[125261.556525] PM: suspend entry (deep)
[125261.864795] Filesystems sync: 0.308 seconds
[125261.906438] Freezing user space processes ... (elapsed 0.005 seconds) done.
[125261.911831] OOM killer disabled.
[125261.911832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[125261.913638] printk: Suspending console(s) (use no_console_suspend to debug)
[125261.914263] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[125261.933878] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[125262.114771] sd 0:0:0:0: [sda] Stopping disk
[125262.700197] ACPI: EC: interrupt blocked
[125262.742606] ACPI: Preparing to enter system sleep state S3
[125262.746481] ACPI: EC: event blocked
[125262.746483] ACPI: EC: EC stopped
[125262.746484] PM: Saving platform NVS memory
[125262.746604] Disabling non-boot CPUs ...
[125262.747343] IRQ 128: no longer affine to CPU1
[125262.749156] smpboot: CPU 1 is now offline
[125262.752745] smpboot: CPU 2 is now offline
[125262.754306] IRQ 122: no longer affine to CPU3
[125262.754309] IRQ 123: no longer affine to CPU3
[125262.754314] IRQ 129: no longer affine to CPU3
[125262.755317] smpboot: CPU 3 is now offline
[125262.758754] ACPI: Low-level resume complete
[125262.758847] ACPI: EC: EC started
[125262.758848] PM: Restoring platform NVS memory
[125262.761404] Enabling non-boot CPUs ...
[125262.761454] x86: Booting SMP configuration:
[125262.761455] smpboot: Booting Node 0 Processor 1 APIC 0x2
[125262.761801] microcode: sig=0x806e9, pf=0x80, revision=0x62
[125262.763942] CPU1 is up
[125262.763971] smpboot: Booting Node 0 Processor 2 APIC 0x1
[125262.764304] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[125262.764628] CPU2 is up
[125262.764658] smpboot: Booting Node 0 Processor 3 APIC 0x3
[125262.765245] CPU3 is up
[125262.766637] ACPI: Waking up from system sleep state S3
[125262.771565] ACPI: EC: interrupt unblocked
[125262.814530] ACPI: EC: event unblocked
[125262.815683] sd 0:0:0:0: [sda] Starting disk
[125263.060496] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[125263.131329] ata2: SATA link down (SStatus 0 SControl 300)
[125263.131941] ata3: SATA link down (SStatus 4 SControl 300)
[125263.336440] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[125263.616424] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[125263.788507] acpi LNXPOWER:13: Turning OFF
[125263.788646] acpi LNXPOWER:12: Turning OFF
[125263.788769] acpi LNXPOWER:11: Turning OFF
[125263.788892] acpi LNXPOWER:10: Turning OFF
[125263.789008] acpi LNXPOWER:0f: Turning OFF
[125263.789131] acpi LNXPOWER:0e: Turning OFF
[125263.789262] acpi LNXPOWER:0d: Turning OFF
[125263.789378] acpi LNXPOWER:0c: Turning OFF
[125263.789500] acpi LNXPOWER:0b: Turning OFF
[125263.789616] acpi LNXPOWER:0a: Turning OFF
[125263.789754] acpi LNXPOWER:09: Turning OFF
[125263.789877] acpi LNXPOWER:08: Turning OFF
[125263.790008] acpi LNXPOWER:07: Turning OFF
[125263.790140] acpi LNXPOWER:06: Turning OFF
[125263.790264] acpi LNXPOWER:05: Turning OFF
[125263.790387] acpi LNXPOWER:04: Turning OFF
[125263.790504] acpi LNXPOWER:03: Turning OFF
[125263.790624] acpi LNXPOWER:02: Turning OFF
[125263.790747] acpi LNXPOWER:01: Turning OFF
[125263.790864] acpi LNXPOWER:00: Turning OFF
[125263.790944] OOM killer enabled.
[125263.790947] Restarting tasks ...
[125263.802814] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[125263.814370] Bluetooth: hci0: read Intel version: 370810225019140f00
[125263.814374] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[125263.824419] done.
[125263.884289] PM: suspend exit
[125264.129452] Bluetooth: hci0: Intel firmware patch completed and activated
[125264.140560] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[125264.170237] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[125265.664323] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[125265.810504] ata1.00: configured for UDMA/133
[125266.550917] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[125266.654233] r8169 0000:01:00.0 eno1: Link is Down
[125270.320647] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[125270.326068] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[125270.332806] wlo1: authenticated
[125270.336317] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[125270.340323] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[125270.344477] wlo1: associated
[125270.354671] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[125270.356426] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[125270.398254] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[125270.398278] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[125343.313481] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[125343.313491] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[125343.324031] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[125343.324038] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[130579.111783] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[140766.399009] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[140766.399019] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[140766.408997] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[140766.409004] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[151657.294293] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[151657.304758] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[151657.437911] r8169 0000:01:00.0 eno1: Link is Down
[151657.602222] PM: suspend entry (deep)
[151657.950361] Filesystems sync: 0.348 seconds
[151657.951807] Freezing user space processes ... (elapsed 0.005 seconds) done.
[151657.957035] OOM killer disabled.
[151657.957036] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[151657.958382] printk: Suspending console(s) (use no_console_suspend to debug)
[151657.958925] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[151657.986121] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[151658.089691] sd 0:0:0:0: [sda] Stopping disk
[151658.675648] ACPI: EC: interrupt blocked
[151658.718924] ACPI: Preparing to enter system sleep state S3
[151658.722809] ACPI: EC: event blocked
[151658.722811] ACPI: EC: EC stopped
[151658.722812] PM: Saving platform NVS memory
[151658.722932] Disabling non-boot CPUs ...
[151658.723637] IRQ 128: no longer affine to CPU1
[151658.724681] smpboot: CPU 1 is now offline
[151658.729612] smpboot: CPU 2 is now offline
[151658.731273] IRQ 122: no longer affine to CPU3
[151658.731275] IRQ 123: no longer affine to CPU3
[151658.731280] IRQ 129: no longer affine to CPU3
[151658.732281] smpboot: CPU 3 is now offline
[151658.735351] ACPI: Low-level resume complete
[151658.735443] ACPI: EC: EC started
[151658.735443] PM: Restoring platform NVS memory
[151658.738029] Enabling non-boot CPUs ...
[151658.738077] x86: Booting SMP configuration:
[151658.738078] smpboot: Booting Node 0 Processor 1 APIC 0x2
[151658.738424] microcode: sig=0x806e9, pf=0x80, revision=0x62
[151658.740570] CPU1 is up
[151658.740596] smpboot: Booting Node 0 Processor 2 APIC 0x1
[151658.740903] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[151658.741234] CPU2 is up
[151658.741265] smpboot: Booting Node 0 Processor 3 APIC 0x3
[151658.741847] CPU3 is up
[151658.743131] ACPI: Waking up from system sleep state S3
[151658.747905] ACPI: EC: interrupt unblocked
[151658.793479] ACPI: EC: event unblocked
[151658.794299] sd 0:0:0:0: [sda] Starting disk
[151659.040797] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[151659.107406] ata2: SATA link down (SStatus 0 SControl 300)
[151659.107862] ata3: SATA link down (SStatus 4 SControl 300)
[151659.320748] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[151659.564305] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[151659.593977] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[151659.600723] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[151659.772792] acpi LNXPOWER:13: Turning OFF
[151659.772911] acpi LNXPOWER:12: Turning OFF
[151659.773087] acpi LNXPOWER:11: Turning OFF
[151659.773220] acpi LNXPOWER:10: Turning OFF
[151659.773377] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[151659.773699] acpi LNXPOWER:0f: Turning OFF
[151659.773806] acpi LNXPOWER:0e: Turning OFF
[151659.773915] acpi LNXPOWER:0d: Turning OFF
[151659.774036] acpi LNXPOWER:0c: Turning OFF
[151659.774158] acpi LNXPOWER:0b: Turning OFF
[151659.774283] acpi LNXPOWER:0a: Turning OFF
[151659.774406] acpi LNXPOWER:09: Turning OFF
[151659.774522] acpi LNXPOWER:08: Turning OFF
[151659.774653] acpi LNXPOWER:07: Turning OFF
[151659.774775] acpi LNXPOWER:06: Turning OFF
[151659.774899] acpi LNXPOWER:05: Turning OFF
[151659.775021] acpi LNXPOWER:04: Turning OFF
[151659.775154] acpi LNXPOWER:03: Turning OFF
[151659.775277] acpi LNXPOWER:02: Turning OFF
[151659.775400] acpi LNXPOWER:01: Turning OFF
[151659.775524] acpi LNXPOWER:00: Turning OFF
[151659.775604] OOM killer enabled.
[151659.775605] Restarting tasks ...
[151659.782727] Bluetooth: hci0: read Intel version: 370810225019140f00
[151659.782782] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[151659.812925] done.
[151659.868671] PM: suspend exit
[151660.122852] Bluetooth: hci0: Intel firmware patch completed and activated
[151661.628981] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[151661.774775] ata1.00: configured for UDMA/133
[151661.942368] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[151662.046014] r8169 0000:01:00.0 eno1: Link is Down
[151665.682872] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[151665.689189] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[151665.692374] wlo1: authenticated
[151665.700551] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[151665.704779] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[151665.712374] wlo1: associated
[151665.712413] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[151665.723976] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[151665.849883] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[151665.849913] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[160374.723297] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[160374.734883] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[160374.829030] r8169 0000:01:00.0 eno1: Link is Down
[160375.120500] PM: suspend entry (deep)
[160375.457717] Filesystems sync: 0.337 seconds
[160375.459309] Freezing user space processes ... (elapsed 0.005 seconds) done.
[160375.465230] OOM killer disabled.
[160375.465231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[160375.467084] printk: Suspending console(s) (use no_console_suspend to debug)
[160375.467775] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[160375.489107] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[160375.551204] sd 0:0:0:0: [sda] Stopping disk
[160376.138551] ACPI: EC: interrupt blocked
[160376.181885] ACPI: Preparing to enter system sleep state S3
[160376.185673] ACPI: EC: event blocked
[160376.185674] ACPI: EC: EC stopped
[160376.185676] PM: Saving platform NVS memory
[160376.185798] Disabling non-boot CPUs ...
[160376.186533] IRQ 128: no longer affine to CPU1
[160376.187565] smpboot: CPU 1 is now offline
[160376.192570] smpboot: CPU 2 is now offline
[160376.193819] IRQ 122: no longer affine to CPU3
[160376.193821] IRQ 123: no longer affine to CPU3
[160376.193825] IRQ 129: no longer affine to CPU3
[160376.194819] smpboot: CPU 3 is now offline
[160376.197829] ACPI: Low-level resume complete
[160376.197922] ACPI: EC: EC started
[160376.197922] PM: Restoring platform NVS memory
[160376.200452] Enabling non-boot CPUs ...
[160376.200502] x86: Booting SMP configuration:
[160376.200503] smpboot: Booting Node 0 Processor 1 APIC 0x2
[160376.200850] microcode: sig=0x806e9, pf=0x80, revision=0x62
[160376.202998] CPU1 is up
[160376.203025] smpboot: Booting Node 0 Processor 2 APIC 0x1
[160376.203342] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[160376.203684] CPU2 is up
[160376.203713] smpboot: Booting Node 0 Processor 3 APIC 0x3
[160376.204298] CPU3 is up
[160376.205679] ACPI: Waking up from system sleep state S3
[160376.210581] ACPI: EC: interrupt unblocked
[160376.252547] ACPI: EC: event unblocked
[160376.253872] sd 0:0:0:0: [sda] Starting disk
[160376.499746] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[160376.566317] ata3: SATA link down (SStatus 4 SControl 300)
[160376.566866] ata2: SATA link down (SStatus 0 SControl 300)
[160376.775646] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[160376.970510] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[160377.000389] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[160377.055649] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[160377.213982] acpi LNXPOWER:13: Turning OFF
[160377.214105] acpi LNXPOWER:12: Turning OFF
[160377.214223] acpi LNXPOWER:11: Turning OFF
[160377.214345] acpi LNXPOWER:10: Turning OFF
[160377.214470] acpi LNXPOWER:0f: Turning OFF
[160377.214593] acpi LNXPOWER:0e: Turning OFF
[160377.214708] acpi LNXPOWER:0d: Turning OFF
[160377.214832] acpi LNXPOWER:0c: Turning OFF
[160377.214956] acpi LNXPOWER:0b: Turning OFF
[160377.215079] acpi LNXPOWER:0a: Turning OFF
[160377.215203] acpi LNXPOWER:09: Turning OFF
[160377.215323] acpi LNXPOWER:08: Turning OFF
[160377.215476] acpi LNXPOWER:07: Turning OFF
[160377.215597] acpi LNXPOWER:06: Turning OFF
[160377.215722] acpi LNXPOWER:05: Turning OFF
[160377.215846] acpi LNXPOWER:04: Turning OFF
[160377.215966] acpi LNXPOWER:03: Turning OFF
[160377.216081] acpi LNXPOWER:02: Turning OFF
[160377.216205] acpi LNXPOWER:01: Turning OFF
[160377.216329] acpi LNXPOWER:00: Turning OFF
[160377.216400] OOM killer enabled.
[160377.216401] Restarting tasks ...
[160377.232836] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[160377.242301] Bluetooth: hci0: read Intel version: 370810225019140f00
[160377.242305] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[160377.245874] done.
[160377.315589] PM: suspend exit
[160377.592543] Bluetooth: hci0: Intel firmware patch completed and activated
[160379.091903] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[160379.237341] ata1.00: configured for UDMA/133
[160379.450036] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[160379.556989] r8169 0000:01:00.0 eno1: Link is Down
[160383.057897] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[160383.061510] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[160383.064640] wlo1: authenticated
[160383.067449] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[160383.071389] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[160383.073200] wlo1: associated
[160383.086631] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[160383.152515] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[160383.660410] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[160383.660422] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[172462.843389] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[172462.844437] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[172462.845506] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[172462.846553] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[172462.847610] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[172462.847617] psmouse serio1: issuing reconnect request
[172463.559015] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[172463.591891] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[187740.250115] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[187740.260954] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[187740.405536] r8169 0000:01:00.0 eno1: Link is Down
[187740.972246] PM: suspend entry (deep)
[187741.427653] Filesystems sync: 0.455 seconds
[187741.428872] Freezing user space processes ... (elapsed 0.005 seconds) done.
[187741.434372] OOM killer disabled.
[187741.434374] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[187741.436266] printk: Suspending console(s) (use no_console_suspend to debug)
[187741.436983] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[187741.451420] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[187741.623925] sd 0:0:0:0: [sda] Stopping disk
[187742.213628] ACPI: EC: interrupt blocked
[187742.255862] ACPI: Preparing to enter system sleep state S3
[187742.259597] ACPI: EC: event blocked
[187742.259598] ACPI: EC: EC stopped
[187742.259600] PM: Saving platform NVS memory
[187742.259719] Disabling non-boot CPUs ...
[187742.260420] IRQ 128: no longer affine to CPU1
[187742.261454] smpboot: CPU 1 is now offline
[187742.266626] smpboot: CPU 2 is now offline
[187742.268120] IRQ 122: no longer affine to CPU3
[187742.268122] IRQ 123: no longer affine to CPU3
[187742.268126] IRQ 129: no longer affine to CPU3
[187742.269121] smpboot: CPU 3 is now offline
[187742.272254] ACPI: Low-level resume complete
[187742.272346] ACPI: EC: EC started
[187742.272347] PM: Restoring platform NVS memory
[187742.274928] Enabling non-boot CPUs ...
[187742.274980] x86: Booting SMP configuration:
[187742.274980] smpboot: Booting Node 0 Processor 1 APIC 0x2
[187742.275328] microcode: sig=0x806e9, pf=0x80, revision=0x62
[187742.277538] CPU1 is up
[187742.277566] smpboot: Booting Node 0 Processor 2 APIC 0x1
[187742.277876] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[187742.278210] CPU2 is up
[187742.278240] smpboot: Booting Node 0 Processor 3 APIC 0x3
[187742.278825] CPU3 is up
[187742.280156] ACPI: Waking up from system sleep state S3
[187742.284936] ACPI: EC: interrupt unblocked
[187742.327357] ACPI: EC: event unblocked
[187742.328478] sd 0:0:0:0: [sda] Starting disk
[187742.577705] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[187742.640356] ata3: SATA link down (SStatus 4 SControl 300)
[187742.640773] ata2: SATA link down (SStatus 0 SControl 300)
[187742.865708] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[187743.049024] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[187743.078898] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[187743.149702] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[187743.299181] acpi LNXPOWER:13: Turning OFF
[187743.299240] acpi LNXPOWER:12: Turning OFF
[187743.299296] acpi LNXPOWER:11: Turning OFF
[187743.299351] acpi LNXPOWER:10: Turning OFF
[187743.299405] acpi LNXPOWER:0f: Turning OFF
[187743.299461] acpi LNXPOWER:0e: Turning OFF
[187743.299515] acpi LNXPOWER:0d: Turning OFF
[187743.299570] acpi LNXPOWER:0c: Turning OFF
[187743.299625] acpi LNXPOWER:0b: Turning OFF
[187743.299680] acpi LNXPOWER:0a: Turning OFF
[187743.299734] acpi LNXPOWER:09: Turning OFF
[187743.299789] acpi LNXPOWER:08: Turning OFF
[187743.299844] acpi LNXPOWER:07: Turning OFF
[187743.299899] acpi LNXPOWER:06: Turning OFF
[187743.299953] acpi LNXPOWER:05: Turning OFF
[187743.300009] acpi LNXPOWER:04: Turning OFF
[187743.300064] acpi LNXPOWER:03: Turning OFF
[187743.300118] acpi LNXPOWER:02: Turning OFF
[187743.300172] acpi LNXPOWER:01: Turning OFF
[187743.300226] acpi LNXPOWER:00: Turning OFF
[187743.300268] OOM killer enabled.
[187743.300268] Restarting tasks ... done.
[187743.326375] Bluetooth: hci0: read Intel version: 370810225019140f00
[187743.326425] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[187743.337577] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[187743.393636] PM: suspend exit
[187743.674416] Bluetooth: hci0: Intel firmware patch completed and activated
[187745.165950] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[187745.306765] ata1.00: configured for UDMA/133
[187745.834426] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[187745.939020] r8169 0000:01:00.0 eno1: Link is Down
[187749.626859] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[187749.632363] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[187749.635894] wlo1: authenticated
[187749.637598] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[187749.642378] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[187749.646621] wlo1: associated
[187749.656675] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[187749.689879] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[187749.726107] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[187749.726140] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[190356.446225] docker0: port 1(veth7f39dfe) entered blocking state
[190356.446229] docker0: port 1(veth7f39dfe) entered disabled state
[190356.455962] device veth7f39dfe entered promiscuous mode
[190357.478191] eth0: renamed from vetha210b43
[190357.549779] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[190357.549795] IPv6: ADDRCONF(NETDEV_CHANGE): veth7f39dfe: link becomes ready
[190357.549841] docker0: port 1(veth7f39dfe) entered blocking state
[190357.549841] docker0: port 1(veth7f39dfe) entered forwarding state
[192423.177723] docker0: port 2(veth4524a88) entered blocking state
[192423.177727] docker0: port 2(veth4524a88) entered disabled state
[192423.177909] device veth4524a88 entered promiscuous mode
[192424.047739] eth0: renamed from veth660ac8e
[192424.131625] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[192424.131643] IPv6: ADDRCONF(NETDEV_CHANGE): veth4524a88: link becomes ready
[192424.131697] docker0: port 2(veth4524a88) entered blocking state
[192424.131699] docker0: port 2(veth4524a88) entered forwarding state
[193706.902843] docker0: port 2(veth4524a88) entered disabled state
[193706.903028] veth660ac8e: renamed from eth0
[193707.124658] docker0: port 2(veth4524a88) entered disabled state
[193707.130348] device veth4524a88 left promiscuous mode
[193707.130361] docker0: port 2(veth4524a88) entered disabled state
[193721.647682] docker0: port 1(veth7f39dfe) entered disabled state
[193721.647919] vetha210b43: renamed from eth0
[193721.846949] docker0: port 1(veth7f39dfe) entered disabled state
[193721.853760] device veth7f39dfe left promiscuous mode
[193721.853777] docker0: port 1(veth7f39dfe) entered disabled state
[208970.363827] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[208970.375128] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[208970.590932] r8169 0000:01:00.0 eno1: Link is Down
[208971.183103] PM: suspend entry (deep)
[208971.638141] Filesystems sync: 0.455 seconds
[208971.639632] Freezing user space processes ... (elapsed 0.005 seconds) done.
[208971.645167] OOM killer disabled.
[208971.645169] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[208971.647023] printk: Suspending console(s) (use no_console_suspend to debug)
[208971.647650] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[208971.668330] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[208971.763406] sd 0:0:0:0: [sda] Stopping disk
[208972.349967] ACPI: EC: interrupt blocked
[208972.393138] ACPI: Preparing to enter system sleep state S3
[208972.397006] ACPI: EC: event blocked
[208972.397007] ACPI: EC: EC stopped
[208972.397009] PM: Saving platform NVS memory
[208972.397132] Disabling non-boot CPUs ...
[208972.397888] IRQ 128: no longer affine to CPU1
[208972.398921] smpboot: CPU 1 is now offline
[208972.404887] smpboot: CPU 2 is now offline
[208972.408946] IRQ 122: no longer affine to CPU3
[208972.408954] IRQ 123: no longer affine to CPU3
[208972.408968] IRQ 129: no longer affine to CPU3
[208972.409986] smpboot: CPU 3 is now offline
[208972.416057] ACPI: Low-level resume complete
[208972.416149] ACPI: EC: EC started
[208972.416149] PM: Restoring platform NVS memory
[208972.418686] Enabling non-boot CPUs ...
[208972.418737] x86: Booting SMP configuration:
[208972.418738] smpboot: Booting Node 0 Processor 1 APIC 0x2
[208972.419085] microcode: sig=0x806e9, pf=0x80, revision=0x62
[208972.421221] CPU1 is up
[208972.421249] smpboot: Booting Node 0 Processor 2 APIC 0x1
[208972.421559] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[208972.421891] CPU2 is up
[208972.421919] smpboot: Booting Node 0 Processor 3 APIC 0x3
[208972.422506] CPU3 is up
[208972.423889] ACPI: Waking up from system sleep state S3
[208972.428757] ACPI: EC: interrupt unblocked
[208972.480589] ACPI: EC: event unblocked
[208972.482709] sd 0:0:0:0: [sda] Starting disk
[208972.727459] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[208972.797639] ata3: SATA link down (SStatus 4 SControl 300)
[208972.798558] ata2: SATA link down (SStatus 0 SControl 300)
[208973.003512] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[208973.192452] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[208973.222335] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[208973.279456] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[208973.441408] acpi LNXPOWER:13: Turning OFF
[208973.441466] acpi LNXPOWER:12: Turning OFF
[208973.441521] acpi LNXPOWER:11: Turning OFF
[208973.441576] acpi LNXPOWER:10: Turning OFF
[208973.441630] acpi LNXPOWER:0f: Turning OFF
[208973.441685] acpi LNXPOWER:0e: Turning OFF
[208973.441740] acpi LNXPOWER:0d: Turning OFF
[208973.441794] acpi LNXPOWER:0c: Turning OFF
[208973.441849] acpi LNXPOWER:0b: Turning OFF
[208973.441904] acpi LNXPOWER:0a: Turning OFF
[208973.441958] acpi LNXPOWER:09: Turning OFF
[208973.442013] acpi LNXPOWER:08: Turning OFF
[208973.442069] acpi LNXPOWER:07: Turning OFF
[208973.442124] acpi LNXPOWER:06: Turning OFF
[208973.442178] acpi LNXPOWER:05: Turning OFF
[208973.442233] acpi LNXPOWER:04: Turning OFF
[208973.442288] acpi LNXPOWER:03: Turning OFF
[208973.442342] acpi LNXPOWER:02: Turning OFF
[208973.442397] acpi LNXPOWER:01: Turning OFF
[208973.442451] acpi LNXPOWER:00: Turning OFF
[208973.442493] OOM killer enabled.
[208973.442493] Restarting tasks ... done.
[208973.448800] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[208973.458374] Bluetooth: hci0: read Intel version: 370810225019140f00
[208973.458379] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[208973.547507] PM: suspend exit
[208973.791790] Bluetooth: hci0: Intel firmware patch completed and activated
[208975.331754] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[208975.471934] ata1.00: configured for UDMA/133
[208975.914299] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[208976.016480] r8169 0000:01:00.0 eno1: Link is Down
[208979.639091] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[208979.644544] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[208979.647866] wlo1: authenticated
[208979.651279] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[208979.661660] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[208979.666581] wlo1: associated
[208979.676323] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[208979.755910] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[208980.225815] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[208980.225828] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[212111.545248] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[212111.546225] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[212111.547302] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[212111.548363] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[212111.549476] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[212111.549481] psmouse serio1: issuing reconnect request
[212112.252930] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[212112.284593] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[236927.570256] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[236927.580905] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[236927.783350] r8169 0000:01:00.0 eno1: Link is Down
[236928.379273] PM: suspend entry (deep)
[236928.862872] Filesystems sync: 0.483 seconds
[236928.864160] Freezing user space processes ... (elapsed 0.005 seconds) done.
[236928.869776] OOM killer disabled.
[236928.869778] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[236928.871582] printk: Suspending console(s) (use no_console_suspend to debug)
[236928.895345] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[236928.922424] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[236929.012918] sd 0:0:0:0: [sda] Stopping disk
[236929.599873] ACPI: EC: interrupt blocked
[236929.643282] ACPI: Preparing to enter system sleep state S3
[236929.646981] ACPI: EC: event blocked
[236929.646983] ACPI: EC: EC stopped
[236929.646984] PM: Saving platform NVS memory
[236929.647107] Disabling non-boot CPUs ...
[236929.647863] IRQ 128: no longer affine to CPU1
[236929.648895] smpboot: CPU 1 is now offline
[236929.653805] smpboot: CPU 2 is now offline
[236929.658183] IRQ 122: no longer affine to CPU3
[236929.658192] IRQ 123: no longer affine to CPU3
[236929.658206] IRQ 129: no longer affine to CPU3
[236929.659247] smpboot: CPU 3 is now offline
[236929.664902] ACPI: Low-level resume complete
[236929.664996] ACPI: EC: EC started
[236929.664996] PM: Restoring platform NVS memory
[236929.667537] Enabling non-boot CPUs ...
[236929.667588] x86: Booting SMP configuration:
[236929.667589] smpboot: Booting Node 0 Processor 1 APIC 0x2
[236929.667936] microcode: sig=0x806e9, pf=0x80, revision=0x62
[236929.670067] CPU1 is up
[236929.670098] smpboot: Booting Node 0 Processor 2 APIC 0x1
[236929.670406] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[236929.670737] CPU2 is up
[236929.670766] smpboot: Booting Node 0 Processor 3 APIC 0x3
[236929.671356] CPU3 is up
[236929.672742] ACPI: Waking up from system sleep state S3
[236929.677568] ACPI: EC: interrupt unblocked
[236929.722214] ACPI: EC: event unblocked
[236929.723413] sd 0:0:0:0: [sda] Starting disk
[236929.969689] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[236930.036644] ata2: SATA link down (SStatus 0 SControl 300)
[236930.036707] ata3: SATA link down (SStatus 4 SControl 300)
[236930.249675] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[236930.436833] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[236930.466678] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[236930.533655] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[236930.691816] acpi LNXPOWER:13: Turning OFF
[236930.691874] acpi LNXPOWER:12: Turning OFF
[236930.691929] acpi LNXPOWER:11: Turning OFF
[236930.691984] acpi LNXPOWER:10: Turning OFF
[236930.692039] acpi LNXPOWER:0f: Turning OFF
[236930.692094] acpi LNXPOWER:0e: Turning OFF
[236930.692149] acpi LNXPOWER:0d: Turning OFF
[236930.692204] acpi LNXPOWER:0c: Turning OFF
[236930.692259] acpi LNXPOWER:0b: Turning OFF
[236930.692314] acpi LNXPOWER:0a: Turning OFF
[236930.692369] acpi LNXPOWER:09: Turning OFF
[236930.692423] acpi LNXPOWER:08: Turning OFF
[236930.692479] acpi LNXPOWER:07: Turning OFF
[236930.692534] acpi LNXPOWER:06: Turning OFF
[236930.692589] acpi LNXPOWER:05: Turning OFF
[236930.692644] acpi LNXPOWER:04: Turning OFF
[236930.692699] acpi LNXPOWER:03: Turning OFF
[236930.692754] acpi LNXPOWER:02: Turning OFF
[236930.692808] acpi LNXPOWER:01: Turning OFF
[236930.692863] acpi LNXPOWER:00: Turning OFF
[236930.692906] OOM killer enabled.
[236930.692906] Restarting tasks ... done.
[236930.711714] Bluetooth: hci0: read Intel version: 370810225019140f00
[236930.711764] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[236930.730054] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[236930.789659] PM: suspend exit
[236931.065221] Bluetooth: hci0: Intel firmware patch completed and activated
[236932.581575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[236932.721737] ata1.00: configured for UDMA/133
[236933.264304] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[236933.371040] r8169 0000:01:00.0 eno1: Link is Down
[236937.014909] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[236937.020072] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[236937.024312] wlo1: authenticated
[236937.025479] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[236937.030176] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[236937.034686] wlo1: associated
[236937.045525] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[236937.052189] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[236937.543679] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[236937.543714] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[238794.372241] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[238794.373879] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[238794.374926] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[238794.375979] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[238794.377031] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[238794.377034] psmouse serio1: issuing reconnect request
[238795.064598] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[238795.094136] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[242046.816684] traps: komorebi[131475] trap int3 ip:7fb05172a0d5 sp:7ffc6c736070 error:0 in libglib-2.0.so.0.6400.3[7fb0516ee000+84000]
[242395.154169] traps: komorebi[131880] trap int3 ip:7effa62590d5 sp:7ffd5562f810 error:0 in libglib-2.0.so.0.6400.3[7effa621d000+84000]
[242511.622350] traps: komorebi[132105] trap int3 ip:7ff2671f60d5 sp:7ffdcf489430 error:0 in libglib-2.0.so.0.6400.3[7ff2671ba000+84000]
[242545.463948] traps: komorebi[132200] trap int3 ip:7ff45d06e0d5 sp:7ffd230491f0 error:0 in libglib-2.0.so.0.6400.3[7ff45d032000+84000]
[242750.942834] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[243644.372981] JFS: nTxBlock = 8192, nTxLock = 65536
[243644.449956] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[243644.555652] QNX4 filesystem 0.2.3 registered.
[243644.746915] raid6: avx2x4 gen() 10359 MB/s
[243644.794912] raid6: avx2x4 xor() 18686 MB/s
[243644.842911] raid6: avx2x2 gen() 26898 MB/s
[243644.890909] raid6: avx2x2 xor() 16998 MB/s
[243644.938910] raid6: avx2x1 gen() 22195 MB/s
[243644.986906] raid6: avx2x1 xor() 15691 MB/s
[243645.034945] raid6: sse2x4 gen() 12774 MB/s
[243645.082910] raid6: sse2x4 xor() 7973 MB/s
[243645.130945] raid6: sse2x2 gen() 11031 MB/s
[243645.178942] raid6: sse2x2 xor() 7415 MB/s
[243645.226946] raid6: sse2x1 gen() 9793 MB/s
[243645.274941] raid6: sse2x1 xor() 5611 MB/s
[243645.274942] raid6: using algorithm avx2x2 gen() 26898 MB/s
[243645.274943] raid6: .... xor() 16998 MB/s, rmw enabled
[243645.274943] raid6: using avx2x2 recovery algorithm
[243645.312909] xor: automatically using best checksumming function avx
[243645.413117] Btrfs loaded, crc32c=crc32c-intel
[246175.697450] usb 1-2: new high-speed USB device number 11 using xhci_hcd
[246175.846749] usb 1-2: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18
[246175.846758] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[246175.846798] usb 1-2: Product: LG-H873
[246175.846803] usb 1-2: Manufacturer: LGE
[246175.846808] usb 1-2: SerialNumber: ...
[246180.117077] usb 1-2: USB disconnect, device number 11
[246180.709396] usb 1-2: new full-speed USB device number 12 using xhci_hcd
[246180.837411] usb 1-2: device descriptor read/64, error -71
[246181.417402] usb 1-2: new high-speed USB device number 13 using xhci_hcd
[246181.566384] usb 1-2: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18
[246181.566390] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[246181.566393] usb 1-2: Product: LG-H873
[246181.566396] usb 1-2: Manufacturer: LGE
[246181.566398] usb 1-2: SerialNumber: ...
[249807.599822] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[249807.609904] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[249807.931925] r8169 0000:01:00.0 eno1: Link is Down
[249808.613871] PM: suspend entry (deep)
[249809.153816] Filesystems sync: 0.539 seconds
[249809.230563] Freezing user space processes ... (elapsed 0.005 seconds) done.
[249809.236553] OOM killer disabled.
[249809.236554] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[249809.238384] printk: Suspending console(s) (use no_console_suspend to debug)
[249809.239004] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[249809.254721] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[249809.347707] sd 0:0:0:0: [sda] Stopping disk
[249809.936626] ACPI: EC: interrupt blocked
[249809.982981] ACPI: Preparing to enter system sleep state S3
[249809.986776] ACPI: EC: event blocked
[249809.986778] ACPI: EC: EC stopped
[249809.986780] PM: Saving platform NVS memory
[249809.986903] Disabling non-boot CPUs ...
[249809.987763] IRQ 128: no longer affine to CPU1
[249809.988780] smpboot: CPU 1 is now offline
[249809.994024] smpboot: CPU 2 is now offline
[249809.998884] IRQ 122: no longer affine to CPU3
[249809.998893] IRQ 123: no longer affine to CPU3
[249809.998907] IRQ 129: no longer affine to CPU3
[249809.999939] smpboot: CPU 3 is now offline
[249810.005973] ACPI: Low-level resume complete
[249810.006066] ACPI: EC: EC started
[249810.006066] PM: Restoring platform NVS memory
[249810.008561] Enabling non-boot CPUs ...
[249810.008613] x86: Booting SMP configuration:
[249810.008613] smpboot: Booting Node 0 Processor 1 APIC 0x2
[249810.008960] microcode: sig=0x806e9, pf=0x80, revision=0x62
[249810.011127] CPU1 is up
[249810.011156] smpboot: Booting Node 0 Processor 2 APIC 0x1
[249810.011465] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[249810.011835] CPU2 is up
[249810.011865] smpboot: Booting Node 0 Processor 3 APIC 0x3
[249810.012490] CPU3 is up
[249810.013889] ACPI: Waking up from system sleep state S3
[249810.018736] ACPI: EC: interrupt unblocked
[249810.063580] ACPI: EC: event unblocked
[249810.064973] sd 0:0:0:0: [sda] Starting disk
[249810.357493] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[249810.380186] ata2: SATA link down (SStatus 0 SControl 300)
[249810.380611] ata3: SATA link down (SStatus 4 SControl 300)
[249810.633553] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[249810.774457] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[249810.804825] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[249810.909528] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[249811.063770] acpi LNXPOWER:13: Turning OFF
[249811.063829] acpi LNXPOWER:12: Turning OFF
[249811.063885] acpi LNXPOWER:11: Turning OFF
[249811.063939] acpi LNXPOWER:10: Turning OFF
[249811.063994] acpi LNXPOWER:0f: Turning OFF
[249811.064049] acpi LNXPOWER:0e: Turning OFF
[249811.064103] acpi LNXPOWER:0d: Turning OFF
[249811.064158] acpi LNXPOWER:0c: Turning OFF
[249811.064212] acpi LNXPOWER:0b: Turning OFF
[249811.064267] acpi LNXPOWER:0a: Turning OFF
[249811.064322] acpi LNXPOWER:09: Turning OFF
[249811.064376] acpi LNXPOWER:08: Turning OFF
[249811.064432] acpi LNXPOWER:07: Turning OFF
[249811.064487] acpi LNXPOWER:06: Turning OFF
[249811.064541] acpi LNXPOWER:05: Turning OFF
[249811.064597] acpi LNXPOWER:04: Turning OFF
[249811.064652] acpi LNXPOWER:03: Turning OFF
[249811.064706] acpi LNXPOWER:02: Turning OFF
[249811.064761] acpi LNXPOWER:01: Turning OFF
[249811.064815] acpi LNXPOWER:00: Turning OFF
[249811.064856] OOM killer enabled.
[249811.064856] Restarting tasks ...
[249811.079289] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[249811.083092] done.
[249811.088182] Bluetooth: hci0: read Intel version: 370810225019140f00
[249811.088186] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[249811.145348] PM: suspend exit
[249811.359187] Bluetooth: hci0: Intel firmware patch completed and activated
[249812.909312] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[249813.057467] ata1.00: configured for UDMA/133
[249813.565580] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[249813.671027] r8169 0000:01:00.0 eno1: Link is Down
[249817.303891] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[249817.308759] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[249817.311332] wlo1: authenticated
[249817.313273] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[249817.317228] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[249817.318911] wlo1: associated
[249817.336981] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[249817.398269] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[249817.820300] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[249817.820321] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[259975.764163] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[261942.499261] wlo1: Connection to AP XX:XX:XX:XX:XX:XX lost
[261942.630258] wlo1: Connection to AP XX:XX:XX:XX:XX:XX lost
[261981.500095] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[261981.504357] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[261981.609879] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[261981.715749] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[261981.818009] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[262171.469034] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[262171.475106] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[262171.478363] wlo1: authenticated
[262171.481864] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[262171.493342] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
[262171.495386] wlo1: associated
[262171.510069] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[262171.518750] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[262178.209457] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[262180.236913] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[262180.241760] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[262180.244772] wlo1: authenticated
[262180.245882] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[262180.259762] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
[262180.264175] wlo1: associated
[262180.273889] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[262180.310781] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[263425.528288] wlo1: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 3=DEAUTH_LEAVING)
[263426.467154] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[263426.470475] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[263426.574931] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[263426.680793] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 3/3)
[263426.783289] wlo1: authentication with XX:XX:XX:XX:XX:XX timed out
[263467.427531] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[263467.433264] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[263467.441817] wlo1: authenticated
[263467.442819] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[263467.452888] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
[263467.455933] wlo1: associated
[263467.476208] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[263467.542755] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[263500.149190] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[263502.198363] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[263502.202822] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[263502.205680] wlo1: authenticated
[263502.207660] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[263502.217440] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
[263502.221474] wlo1: associated
[263502.233291] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[263502.256928] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[265628.724927] br-490b9818602a: port 1(veth041ad17) entered blocking state
[265628.724934] br-490b9818602a: port 1(veth041ad17) entered disabled state
[265628.725158] device veth041ad17 entered promiscuous mode
[265630.421843] eth0: renamed from veth618636e
[265630.445724] IPv6: ADDRCONF(NETDEV_CHANGE): veth041ad17: link becomes ready
[265630.445930] br-490b9818602a: port 1(veth041ad17) entered blocking state
[265630.445935] br-490b9818602a: port 1(veth041ad17) entered forwarding state
[265630.446164] IPv6: ADDRCONF(NETDEV_CHANGE): br-490b9818602a: link becomes ready
[265800.347302] br-490b9818602a: port 1(veth041ad17) entered disabled state
[265800.347859] veth618636e: renamed from eth0
[265800.504689] br-490b9818602a: port 1(veth041ad17) entered disabled state
[265800.509768] device veth041ad17 left promiscuous mode
[265800.509780] br-490b9818602a: port 1(veth041ad17) entered disabled state
[265807.022651] docker0: port 1(veth81987bb) entered blocking state
[265807.022655] docker0: port 1(veth81987bb) entered disabled state
[265807.026194] device veth81987bb entered promiscuous mode
[265807.708985] eth0: renamed from vetha3a49de
[265807.769478] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[265807.769495] IPv6: ADDRCONF(NETDEV_CHANGE): veth81987bb: link becomes ready
[265807.769541] docker0: port 1(veth81987bb) entered blocking state
[265807.769543] docker0: port 1(veth81987bb) entered forwarding state
[267573.223893] docker0: port 1(veth81987bb) entered disabled state
[267573.224286] vetha3a49de: renamed from eth0
[267573.501035] docker0: port 1(veth81987bb) entered disabled state
[267573.507629] device veth81987bb left promiscuous mode
[267573.507644] docker0: port 1(veth81987bb) entered disabled state
[267661.915093] docker0: port 1(veth1266177) entered blocking state
[267661.915096] docker0: port 1(veth1266177) entered disabled state
[267661.915278] device veth1266177 entered promiscuous mode
[267662.567366] eth0: renamed from veth78f3351
[267662.667048] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[267662.667064] IPv6: ADDRCONF(NETDEV_CHANGE): veth1266177: link becomes ready
[267662.667108] docker0: port 1(veth1266177) entered blocking state
[267662.667109] docker0: port 1(veth1266177) entered forwarding state
[267663.044441] veth78f3351: renamed from eth0
[267663.095878] docker0: port 1(veth1266177) entered disabled state
[267663.255686] docker0: port 1(veth1266177) entered disabled state
[267663.261955] device veth1266177 left promiscuous mode
[267663.261972] docker0: port 1(veth1266177) entered disabled state
[267779.810235] docker0: port 1(veth6621551) entered blocking state
[267779.810237] docker0: port 1(veth6621551) entered disabled state
[267779.810340] device veth6621551 entered promiscuous mode
[267780.483108] eth0: renamed from veth35b4aa3
[267780.592963] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[267780.592980] IPv6: ADDRCONF(NETDEV_CHANGE): veth6621551: link becomes ready
[267780.593032] docker0: port 1(veth6621551) entered blocking state
[267780.593038] docker0: port 1(veth6621551) entered forwarding state
[267866.442349] docker0: port 1(veth6621551) entered disabled state
[267866.442921] veth35b4aa3: renamed from eth0
[267866.631775] docker0: port 1(veth6621551) entered disabled state
[267866.638832] device veth6621551 left promiscuous mode
[267866.638843] docker0: port 1(veth6621551) entered disabled state
[267876.089580] docker0: port 1(veth42333e4) entered blocking state
[267876.089583] docker0: port 1(veth42333e4) entered disabled state
[267876.089757] device veth42333e4 entered promiscuous mode
[267876.760015] eth0: renamed from vetha406baf
[267876.861187] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[267876.861203] IPv6: ADDRCONF(NETDEV_CHANGE): veth42333e4: link becomes ready
[267876.861249] docker0: port 1(veth42333e4) entered blocking state
[267876.861250] docker0: port 1(veth42333e4) entered forwarding state
[269195.326669] docker0: port 1(veth42333e4) entered disabled state
[269195.326914] vetha406baf: renamed from eth0
[269195.525723] docker0: port 1(veth42333e4) entered disabled state
[269195.531910] device veth42333e4 left promiscuous mode
[269195.531922] docker0: port 1(veth42333e4) entered disabled state
[269213.896207] br-7998b87ee15e: port 1(vethba90b33) entered blocking state
[269213.896215] br-7998b87ee15e: port 1(vethba90b33) entered disabled state
[269213.896558] device vethba90b33 entered promiscuous mode
[269214.058698] br-7998b87ee15e: port 2(veth15e4710) entered blocking state
[269214.058705] br-7998b87ee15e: port 2(veth15e4710) entered disabled state
[269214.059071] device veth15e4710 entered promiscuous mode
[269214.059696] br-7998b87ee15e: port 2(veth15e4710) entered blocking state
[269214.059702] br-7998b87ee15e: port 2(veth15e4710) entered forwarding state
[269214.059952] br-7998b87ee15e: port 2(veth15e4710) entered disabled state
[269215.204039] eth0: renamed from veth97348eb
[269215.248267] eth0: renamed from vethd1ae81b
[269215.268402] IPv6: ADDRCONF(NETDEV_CHANGE): vethba90b33: link becomes ready
[269215.268626] br-7998b87ee15e: port 1(vethba90b33) entered blocking state
[269215.268632] br-7998b87ee15e: port 1(vethba90b33) entered forwarding state
[269215.268788] IPv6: ADDRCONF(NETDEV_CHANGE): br-7998b87ee15e: link becomes ready
[269215.269283] IPv6: ADDRCONF(NETDEV_CHANGE): veth15e4710: link becomes ready
[269215.269428] br-7998b87ee15e: port 2(veth15e4710) entered blocking state
[269215.269433] br-7998b87ee15e: port 2(veth15e4710) entered forwarding state
[270587.123575] br-7998b87ee15e: port 2(veth15e4710) entered disabled state
[270587.123734] vethd1ae81b: renamed from eth0
[270587.223814] br-7998b87ee15e: port 1(vethba90b33) entered disabled state
[270587.223941] veth97348eb: renamed from eth0
[270587.397415] br-7998b87ee15e: port 2(veth15e4710) entered disabled state
[270587.404061] device veth15e4710 left promiscuous mode
[270587.404075] br-7998b87ee15e: port 2(veth15e4710) entered disabled state
[270587.456689] br-7998b87ee15e: port 1(vethba90b33) entered disabled state
[270587.463626] device vethba90b33 left promiscuous mode
[270587.463643] br-7998b87ee15e: port 1(vethba90b33) entered disabled state
[271133.441870] docker0: port 1(veth3c71a35) entered blocking state
[271133.441872] docker0: port 1(veth3c71a35) entered disabled state
[271133.442488] device veth3c71a35 entered promiscuous mode
[271134.148688] eth0: renamed from veth3ab7253
[271134.243067] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[271134.243083] IPv6: ADDRCONF(NETDEV_CHANGE): veth3c71a35: link becomes ready
[271134.243129] docker0: port 1(veth3c71a35) entered blocking state
[271134.243131] docker0: port 1(veth3c71a35) entered forwarding state
[271142.530016] docker0: port 1(veth3c71a35) entered disabled state
[271142.530682] veth3ab7253: renamed from eth0
[271142.817307] docker0: port 1(veth3c71a35) entered disabled state
[271142.823557] device veth3c71a35 left promiscuous mode
[271142.823570] docker0: port 1(veth3c71a35) entered disabled state
[271150.227857] br-7b8e1b6314e2: port 1(veth45c095a) entered blocking state
[271150.227865] br-7b8e1b6314e2: port 1(veth45c095a) entered disabled state
[271150.228285] device veth45c095a entered promiscuous mode
[271150.972285] eth0: renamed from veth283b17c
[271150.992603] IPv6: ADDRCONF(NETDEV_CHANGE): veth45c095a: link becomes ready
[271150.992759] br-7b8e1b6314e2: port 1(veth45c095a) entered blocking state
[271150.992765] br-7b8e1b6314e2: port 1(veth45c095a) entered forwarding state
[271150.992916] IPv6: ADDRCONF(NETDEV_CHANGE): br-7b8e1b6314e2: link becomes ready
[271162.904032] br-7b8e1b6314e2: port 2(vethb589e0a) entered blocking state
[271162.904035] br-7b8e1b6314e2: port 2(vethb589e0a) entered disabled state
[271162.904200] device vethb589e0a entered promiscuous mode
[271163.732163] eth0: renamed from vethafe1c21
[271163.760714] IPv6: ADDRCONF(NETDEV_CHANGE): vethb589e0a: link becomes ready
[271163.760918] br-7b8e1b6314e2: port 2(vethb589e0a) entered blocking state
[271163.760924] br-7b8e1b6314e2: port 2(vethb589e0a) entered forwarding state
[271471.105418] br-7b8e1b6314e2: port 2(vethb589e0a) entered disabled state
[271471.105624] vethafe1c21: renamed from eth0
[271471.294010] br-7b8e1b6314e2: port 2(vethb589e0a) entered disabled state
[271471.299362] device vethb589e0a left promiscuous mode
[271471.299375] br-7b8e1b6314e2: port 2(vethb589e0a) entered disabled state
[271475.566507] br-7b8e1b6314e2: port 1(veth45c095a) entered disabled state
[271475.566694] veth283b17c: renamed from eth0
[271475.733135] br-7b8e1b6314e2: port 1(veth45c095a) entered disabled state
[271475.739629] device veth45c095a left promiscuous mode
[271475.739642] br-7b8e1b6314e2: port 1(veth45c095a) entered disabled state
[271627.947392] br-b6d778330791: port 1(veth93cb0c4) entered blocking state
[271627.947396] br-b6d778330791: port 1(veth93cb0c4) entered disabled state
[271627.947969] device veth93cb0c4 entered promiscuous mode
[271628.089431] br-b6d778330791: port 2(veth78fe05d) entered blocking state
[271628.089435] br-b6d778330791: port 2(veth78fe05d) entered disabled state
[271628.089630] device veth78fe05d entered promiscuous mode
[271628.090161] br-b6d778330791: port 2(veth78fe05d) entered blocking state
[271628.090166] br-b6d778330791: port 2(veth78fe05d) entered forwarding state
[271628.090409] br-b6d778330791: port 2(veth78fe05d) entered disabled state
[271629.108175] eth0: renamed from veth22107a4
[271629.124764] IPv6: ADDRCONF(NETDEV_CHANGE): veth93cb0c4: link becomes ready
[271629.124830] br-b6d778330791: port 1(veth93cb0c4) entered blocking state
[271629.124832] br-b6d778330791: port 1(veth93cb0c4) entered forwarding state
[271629.124901] IPv6: ADDRCONF(NETDEV_CHANGE): br-b6d778330791: link becomes ready
[271629.210599] eth0: renamed from veth254853f
[271629.240635] IPv6: ADDRCONF(NETDEV_CHANGE): veth78fe05d: link becomes ready
[271629.240810] br-b6d778330791: port 2(veth78fe05d) entered blocking state
[271629.240815] br-b6d778330791: port 2(veth78fe05d) entered forwarding state
[275302.758298] docker0: port 1(veth7deb677) entered blocking state
[275302.758305] docker0: port 1(veth7deb677) entered disabled state
[275302.758519] device veth7deb677 entered promiscuous mode
[275302.758820] docker0: port 1(veth7deb677) entered blocking state
[275302.758826] docker0: port 1(veth7deb677) entered forwarding state
[275302.760815] docker0: port 1(veth7deb677) entered disabled state
[275303.508839] eth0: renamed from veth31ffbfa
[275303.627358] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[275303.627373] IPv6: ADDRCONF(NETDEV_CHANGE): veth7deb677: link becomes ready
[275303.627422] docker0: port 1(veth7deb677) entered blocking state
[275303.627423] docker0: port 1(veth7deb677) entered forwarding state
[275370.956148] veth31ffbfa: renamed from eth0
[275370.972612] docker0: port 1(veth7deb677) entered disabled state
[275371.132809] docker0: port 1(veth7deb677) entered disabled state
[275371.134901] device veth7deb677 left promiscuous mode
[275371.134905] docker0: port 1(veth7deb677) entered disabled state
[280162.084328] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[280162.095386] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[280162.294319] r8169 0000:01:00.0 eno1: Link is Down
[280162.998340] PM: suspend entry (deep)
[280163.825215] Filesystems sync: 0.826 seconds
[280163.839894] Freezing user space processes ... (elapsed 0.005 seconds) done.
[280163.845661] OOM killer disabled.
[280163.845662] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[280163.847163] printk: Suspending console(s) (use no_console_suspend to debug)
[280163.847466] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[280163.873707] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[280163.873926] sd 0:0:0:0: [sda] Stopping disk
[280164.464212] ACPI: EC: interrupt blocked
[280164.506489] ACPI: Preparing to enter system sleep state S3
[280164.510312] ACPI: EC: event blocked
[280164.510314] ACPI: EC: EC stopped
[280164.510315] PM: Saving platform NVS memory
[280164.510434] Disabling non-boot CPUs ...
[280164.511297] IRQ 128: no longer affine to CPU1
[280164.512316] smpboot: CPU 1 is now offline
[280164.518925] smpboot: CPU 2 is now offline
[280164.523332] IRQ 122: no longer affine to CPU3
[280164.523341] IRQ 123: no longer affine to CPU3
[280164.523354] IRQ 129: no longer affine to CPU3
[280164.524372] smpboot: CPU 3 is now offline
[280164.530697] ACPI: Low-level resume complete
[280164.530791] ACPI: EC: EC started
[280164.530791] PM: Restoring platform NVS memory
[280164.533421] Enabling non-boot CPUs ...
[280164.533470] x86: Booting SMP configuration:
[280164.533471] smpboot: Booting Node 0 Processor 1 APIC 0x2
[280164.533818] microcode: sig=0x806e9, pf=0x80, revision=0x62
[280164.536003] CPU1 is up
[280164.536031] smpboot: Booting Node 0 Processor 2 APIC 0x1
[280164.536350] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[280164.536740] CPU2 is up
[280164.536769] smpboot: Booting Node 0 Processor 3 APIC 0x3
[280164.537402] CPU3 is up
[280164.538723] ACPI: Waking up from system sleep state S3
[280164.543661] ACPI: EC: interrupt unblocked
[280164.586547] ACPI: EC: event unblocked
[280164.588050] sd 0:0:0:0: [sda] Starting disk
[280164.884881] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[280164.903810] ata3: SATA link down (SStatus 4 SControl 300)
[280164.904235] ata2: SATA link down (SStatus 0 SControl 300)
[280165.164852] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[280165.296018] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[280165.325880] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[280165.440888] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[280165.590288] acpi LNXPOWER:13: Turning OFF
[280165.590347] acpi LNXPOWER:12: Turning OFF
[280165.590403] acpi LNXPOWER:11: Turning OFF
[280165.590457] acpi LNXPOWER:10: Turning OFF
[280165.590512] acpi LNXPOWER:0f: Turning OFF
[280165.590568] acpi LNXPOWER:0e: Turning OFF
[280165.590622] acpi LNXPOWER:0d: Turning OFF
[280165.590678] acpi LNXPOWER:0c: Turning OFF
[280165.590733] acpi LNXPOWER:0b: Turning OFF
[280165.590788] acpi LNXPOWER:0a: Turning OFF
[280165.590843] acpi LNXPOWER:09: Turning OFF
[280165.590897] acpi LNXPOWER:08: Turning OFF
[280165.590953] acpi LNXPOWER:07: Turning OFF
[280165.591008] acpi LNXPOWER:06: Turning OFF
[280165.591063] acpi LNXPOWER:05: Turning OFF
[280165.591119] acpi LNXPOWER:04: Turning OFF
[280165.591174] acpi LNXPOWER:03: Turning OFF
[280165.591228] acpi LNXPOWER:02: Turning OFF
[280165.591282] acpi LNXPOWER:01: Turning OFF
[280165.591337] acpi LNXPOWER:00: Turning OFF
[280165.591382] OOM killer enabled.
[280165.591382] Restarting tasks ...
[280165.602180] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[280165.614076] done.
[280165.618248] Bluetooth: hci0: read Intel version: 370810225019140f00
[280165.618294] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[280165.684741] PM: suspend exit
[280165.982423] Bluetooth: hci0: Intel firmware patch completed and activated
[280167.429121] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[280167.580556] ata1.00: configured for UDMA/133
[280167.893994] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[280167.998322] r8169 0000:01:00.0 eno1: Link is Down
[280171.639629] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[280171.644996] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[280171.648197] wlo1: authenticated
[280171.648623] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[280171.652805] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[280171.657031] wlo1: associated
[280171.680072] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[280171.685946] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[280172.144552] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[280172.144581] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[282422.506832] br-b6d778330791: port 1(veth93cb0c4) entered disabled state
[282422.506903] veth22107a4: renamed from eth0
[282422.638653] br-b6d778330791: port 1(veth93cb0c4) entered disabled state
[282422.641217] device veth93cb0c4 left promiscuous mode
[282422.641222] br-b6d778330791: port 1(veth93cb0c4) entered disabled state
[282427.562149] br-b6d778330791: port 1(veth7416ca2) entered blocking state
[282427.562151] br-b6d778330791: port 1(veth7416ca2) entered disabled state
[282427.562205] device veth7416ca2 entered promiscuous mode
[282427.562266] br-b6d778330791: port 1(veth7416ca2) entered blocking state
[282427.562267] br-b6d778330791: port 1(veth7416ca2) entered forwarding state
[282427.571727] br-b6d778330791: port 1(veth7416ca2) entered disabled state
[282428.309199] eth0: renamed from veth8452817
[282428.345847] IPv6: ADDRCONF(NETDEV_CHANGE): veth7416ca2: link becomes ready
[282428.346035] br-b6d778330791: port 1(veth7416ca2) entered blocking state
[282428.346040] br-b6d778330791: port 1(veth7416ca2) entered forwarding state
[282428.660748] br-b6d778330791: port 1(veth7416ca2) entered disabled state
[282428.660829] veth8452817: renamed from eth0
[282428.815905] br-b6d778330791: port 1(veth7416ca2) entered disabled state
[282428.822152] device veth7416ca2 left promiscuous mode
[282428.822168] br-b6d778330791: port 1(veth7416ca2) entered disabled state
[282486.688318] br-b6d778330791: port 1(veth40d82eb) entered blocking state
[282486.688320] br-b6d778330791: port 1(veth40d82eb) entered disabled state
[282486.688453] device veth40d82eb entered promiscuous mode
[282487.474102] eth0: renamed from veth7cf43de
[282487.496726] IPv6: ADDRCONF(NETDEV_CHANGE): veth40d82eb: link becomes ready
[282487.496933] br-b6d778330791: port 1(veth40d82eb) entered blocking state
[282487.496939] br-b6d778330791: port 1(veth40d82eb) entered forwarding state
[282908.570208] br-b6d778330791: port 1(veth40d82eb) entered disabled state
[282908.574966] veth7cf43de: renamed from eth0
[282908.695594] br-b6d778330791: port 1(veth40d82eb) entered disabled state
[282908.701691] device veth40d82eb left promiscuous mode
[282908.701701] br-b6d778330791: port 1(veth40d82eb) entered disabled state
[282912.552015] br-b6d778330791: port 1(vethaeb3ab9) entered blocking state
[282912.552016] br-b6d778330791: port 1(vethaeb3ab9) entered disabled state
[282912.553764] device vethaeb3ab9 entered promiscuous mode
[282913.318878] eth0: renamed from veth30022af
[282913.339794] IPv6: ADDRCONF(NETDEV_CHANGE): vethaeb3ab9: link becomes ready
[282913.339968] br-b6d778330791: port 1(vethaeb3ab9) entered blocking state
[282913.339972] br-b6d778330791: port 1(vethaeb3ab9) entered forwarding state
[283624.599264] br-b6d778330791: port 3(veth88cc74e) entered blocking state
[283624.599268] br-b6d778330791: port 3(veth88cc74e) entered disabled state
[283624.599500] device veth88cc74e entered promiscuous mode
[283625.417539] eth0: renamed from veth05e50c3
[283625.440906] IPv6: ADDRCONF(NETDEV_CHANGE): veth88cc74e: link becomes ready
[283625.441110] br-b6d778330791: port 3(veth88cc74e) entered blocking state
[283625.441116] br-b6d778330791: port 3(veth88cc74e) entered forwarding state
[284748.228747] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[284751.803329] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[284751.806748] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[284751.809789] wlo1: authenticated
[284751.813410] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[284751.821407] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[284751.827243] wlo1: associated
[284751.836258] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[284751.855570] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[284805.615796] wlo1: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 3=DEAUTH_LEAVING)
[284812.563108] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[284812.567663] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[284812.570898] wlo1: authenticated
[284812.574818] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[284812.580822] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[284812.589599] wlo1: associated
[284812.589634] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[284825.845922] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[284829.109804] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[284829.114537] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[284829.117698] wlo1: authenticated
[284829.119566] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[284829.126366] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[284829.130050] wlo1: associated
[284829.139821] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[284829.172611] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[296498.577601] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[296498.588162] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[296498.849515] r8169 0000:01:00.0 eno1: Link is Down
[296499.332010] PM: suspend entry (deep)
[296500.269994] Filesystems sync: 0.937 seconds
[296500.271363] Freezing user space processes ... (elapsed 0.005 seconds) done.
[296500.276841] OOM killer disabled.
[296500.276841] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[296500.278353] printk: Suspending console(s) (use no_console_suspend to debug)
[296500.278604] wlo1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING)
[296500.308856] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[296500.309108] sd 0:0:0:0: [sda] Stopping disk
[296500.898508] ACPI: EC: interrupt blocked
[296500.941660] ACPI: Preparing to enter system sleep state S3
[296500.945523] ACPI: EC: event blocked
[296500.945525] ACPI: EC: EC stopped
[296500.945526] PM: Saving platform NVS memory
[296500.945647] Disabling non-boot CPUs ...
[296500.946515] IRQ 128: no longer affine to CPU1
[296500.947547] smpboot: CPU 1 is now offline
[296500.954580] smpboot: CPU 2 is now offline
[296500.958846] IRQ 122: no longer affine to CPU3
[296500.958854] IRQ 123: no longer affine to CPU3
[296500.958867] IRQ 129: no longer affine to CPU3
[296500.959884] smpboot: CPU 3 is now offline
[296500.965961] ACPI: Low-level resume complete
[296500.966055] ACPI: EC: EC started
[296500.966055] PM: Restoring platform NVS memory
[296500.968676] Enabling non-boot CPUs ...
[296500.968724] x86: Booting SMP configuration:
[296500.968725] smpboot: Booting Node 0 Processor 1 APIC 0x2
[296500.969072] microcode: sig=0x806e9, pf=0x80, revision=0x62
[296500.971266] CPU1 is up
[296500.971293] smpboot: Booting Node 0 Processor 2 APIC 0x1
[296500.971605] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[296500.972001] CPU2 is up
[296500.972031] smpboot: Booting Node 0 Processor 3 APIC 0x3
[296500.972665] CPU3 is up
[296500.973998] ACPI: Waking up from system sleep state S3
[296500.978814] ACPI: EC: interrupt unblocked
[296501.021322] ACPI: EC: event unblocked
[296501.021853] sd 0:0:0:0: [sda] Starting disk
[296501.315989] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[296501.334621] ata2: SATA link down (SStatus 0 SControl 300)
[296501.335586] ata3: SATA link down (SStatus 4 SControl 300)
[296501.596018] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[296501.736771] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[296501.766379] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[296501.872043] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[296502.026278] acpi LNXPOWER:13: Turning OFF
[296502.026337] acpi LNXPOWER:12: Turning OFF
[296502.026393] acpi LNXPOWER:11: Turning OFF
[296502.026448] acpi LNXPOWER:10: Turning OFF
[296502.026504] acpi LNXPOWER:0f: Turning OFF
[296502.026559] acpi LNXPOWER:0e: Turning OFF
[296502.026614] acpi LNXPOWER:0d: Turning OFF
[296502.026669] acpi LNXPOWER:0c: Turning OFF
[296502.026724] acpi LNXPOWER:0b: Turning OFF
[296502.026779] acpi LNXPOWER:0a: Turning OFF
[296502.026834] acpi LNXPOWER:09: Turning OFF
[296502.026889] acpi LNXPOWER:08: Turning OFF
[296502.026944] acpi LNXPOWER:07: Turning OFF
[296502.026999] acpi LNXPOWER:06: Turning OFF
[296502.027054] acpi LNXPOWER:05: Turning OFF
[296502.027110] acpi LNXPOWER:04: Turning OFF
[296502.027165] acpi LNXPOWER:03: Turning OFF
[296502.027219] acpi LNXPOWER:02: Turning OFF
[296502.027274] acpi LNXPOWER:01: Turning OFF
[296502.027329] acpi LNXPOWER:00: Turning OFF
[296502.027370] OOM killer enabled.
[296502.027371] Restarting tasks ... done.
[296502.039856] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[296502.052603] Bluetooth: hci0: read Intel version: 370810225019140f00
[296502.052608] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq
[296502.099933] PM: suspend exit
[296502.416739] Bluetooth: hci0: Intel firmware patch completed and activated
[296503.871848] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[296504.017825] ata1.00: configured for UDMA/133
[296504.557191] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[296504.661405] r8169 0000:01:00.0 eno1: Link is Down
[296508.244696] wlo1: authenticate with XX:XX:XX:XX:XX:XX
[296508.249475] wlo1: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[296508.253691] wlo1: authenticated
[296508.255917] wlo1: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[296508.259971] wlo1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2)
[296508.262134] wlo1: associated
[296508.275276] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[296508.354476] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[296508.422980] r8169 0000:01:00.0 eno1: Link is Up - 1Gbps/Full - flow control off
[296508.423012] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[297220.432662] Process accounting resumed
[297220.929916] Process accounting resumed
[298335.513885] usb 1-2: USB disconnect, device number 13
[298335.825714] usb 1-2: new high-speed USB device number 14 using xhci_hcd
[298335.976504] usb 1-2: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18
[298335.976513] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[298335.976519] usb 1-2: Product: LG-H873
[298335.976524] usb 1-2: Manufacturer: LGE
[298335.976529] usb 1-2: SerialNumber: ...
[300319.903065] usb 1-2: USB disconnect, device number 14
[300320.210651] usb 1-2: new high-speed USB device number 15 using xhci_hcd
[300320.360199] usb 1-2: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18
[300320.360206] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[300320.360210] usb 1-2: Product: LG-H873
[300320.360213] usb 1-2: Manufacturer: LGE
[300320.360216] usb 1-2: SerialNumber: ...
[301800.205081] Non-volatile memory driver v1.3
[301800.209623] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[301800.209640] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[301800.212438] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[301800.433779] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[301801.966035] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[301801.967791] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7