[ 0.962177] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000 [ 0.962203] pci 0000:00:12.0: reg 0x10: [mem 0x4022113000-0x4022113fff 64bit] [ 0.963982] pci 0000:00:13.0: [8086:9dfc] type 00 class 0x070000 [ 0.964011] pci 0000:00:13.0: reg 0x10: [mem 0x402210c000-0x402210dfff 64bit] [ 0.964095] pci 0000:00:13.0: PME# supported from D0 D3hot [ 0.965907] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330 [ 0.965932] pci 0000:00:14.0: reg 0x10: [mem 0xc8220000-0xc822ffff 64bit] [ 0.966019] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.967839] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000 [ 0.967864] pci 0000:00:14.2: reg 0x10: [mem 0xc8230000-0xc8231fff 64bit] [ 0.967877] pci 0000:00:14.2: reg 0x18: [mem 0x4022112000-0x4022112fff 64bit] [ 0.969693] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000 [ 0.969841] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.972042] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000 [ 0.972190] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.974357] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000 [ 0.974387] pci 0000:00:16.0: reg 0x10: [mem 0x402210f000-0x402210ffff 64bit] [ 0.974484] pci 0000:00:16.0: PME# supported from D3hot [ 0.976313] pci 0000:00:16.3: [8086:9de3] type 00 class 0x070002 [ 0.976339] pci 0000:00:16.3: reg 0x10: [io 0x3060-0x3067] [ 0.976349] pci 0000:00:16.3: reg 0x14: [mem 0xc8233000-0xc8233fff] [ 0.978190] pci 0000:00:1c.0: [8086:9dbc] type 01 class 0x060400 [ 0.979925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.979953] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity [ 0.981824] pci 0000:00:1c.7: [8086:9dbf] type 01 class 0x060400 [ 0.981943] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.981967] pci 0000:00:1c.7: PTM enabled (root), 4dns granularity [ 0.983780] pci 0000:00:1d.0: [8086:9db4] type 01 class 0x060400 [ 0.983887] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.983909] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity [ 0.985786] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100 [ 0.987641] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040100 [ 0.987709] pci 0000:00:1f.3: reg 0x10: [mem 0x4022108000-0x402210bfff 64bit] [ 0.987773] pci 0000:00:1f.3: reg 0x20: [mem 0x4022000000-0x40220fffff 64bit] [ 0.987913] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.989889] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500 [ 0.989927] pci 0000:00:1f.4: reg 0x10: [mem 0x402210e000-0x402210e0ff 64bit] [ 0.989953] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.991748] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000 [ 0.991769] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.993508] pci 0000:00:1f.6: [8086:15bd] type 00 class 0x020000 [ 0.993566] pci 0000:00:1f.6: reg 0x10: [mem 0xc8200000-0xc821ffff] [ 0.993806] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.995736] pci 0000:01:00.0: [8086:15e7] type 01 class 0x060400 [ 0.995809] pci 0000:01:00.0: enabling Extended Tags [ 0.995924] pci 0000:01:00.0: supports D1 D2 [ 0.995926] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.995998] pci 0000:01:00.0: PTM enabled, 4dns granularity [ 0.996014] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 0.996147] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.996152] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.996158] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.996238] pci 0000:02:00.0: [8086:15e7] type 01 class 0x060400 [ 0.996314] pci 0000:02:00.0: enabling Extended Tags [ 0.996428] pci 0000:02:00.0: supports D1 D2 [ 0.996429] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.996559] pci 0000:02:01.0: [8086:15e7] type 01 class 0x060400 [ 0.996635] pci 0000:02:01.0: enabling Extended Tags [ 0.996748] pci 0000:02:01.0: supports D1 D2 [ 0.996750] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.996876] pci 0000:02:02.0: [8086:15e7] type 01 class 0x060400 [ 0.996952] pci 0000:02:02.0: enabling Extended Tags [ 0.997063] pci 0000:02:02.0: supports D1 D2 [ 0.997065] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.997234] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 0.997245] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.997252] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.997322] pci 0000:03:00.0: [8086:15e8] type 00 class 0x088000 [ 0.997360] pci 0000:03:00.0: reg 0x10: [mem 0xc6000000-0xc603ffff] [ 0.997373] pci 0000:03:00.0: reg 0x14: [mem 0xc6040000-0xc6040fff] [ 0.997442] pci 0000:03:00.0: enabling Extended Tags [ 0.997561] pci 0000:03:00.0: supports D1 D2 [ 0.997562] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.997739] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.997749] pci 0000:02:00.0: bridge window [mem 0xc6000000-0xc60fffff] [ 0.997809] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 0.997819] pci 0000:02:01.0: bridge window [mem 0xb0000000-0xc5efffff] [ 0.997826] pci 0000:02:01.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.997916] pci 0000:39:00.0: [8086:15e9] type 00 class 0x0c0330 [ 0.997955] pci 0000:39:00.0: reg 0x10: [mem 0xc5f00000-0xc5f0ffff] [ 0.998167] pci 0000:39:00.0: supports D1 D2 [ 0.998168] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.998253] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 0.998390] pci 0000:02:02.0: PCI bridge to [bus 39] [ 0.998400] pci 0000:02:02.0: bridge window [mem 0xc5f00000-0xc5ffffff] [ 0.998709] pci 0000:3a:00.0: [8086:2723] type 00 class 0x028000 [ 0.998837] pci 0000:3a:00.0: reg 0x10: [mem 0xc8100000-0xc8103fff 64bit] [ 0.999192] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.999944] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 0.999949] pci 0000:00:1c.7: bridge window [mem 0xc8100000-0xc81fffff] [ 1.000022] pci 0000:3b:00.0: [15b7:5002] type 00 class 0x010802 [ 1.000056] pci 0000:3b:00.0: reg 0x10: [mem 0xc8000000-0xc8003fff 64bit] [ 1.000090] pci 0000:3b:00.0: reg 0x20: [mem 0xc8004000-0xc80040ff 64bit] [ 1.000332] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 1.000337] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc80fffff] [ 1.005315] ACPI: EC: interrupt unblocked [ 1.005327] ACPI: EC: event unblocked [ 1.005340] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.005342] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 1.005430] iommu: Default domain type: Translated [ 1.005450] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.005450] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.005450] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.005450] vgaarb: loaded [ 1.005450] EDAC MC: Ver: 3.0.0 [ 1.005450] Registered efivars operations [ 1.005450] PCI: Using ACPI for IRQ routing [ 1.020175] PCI: pci_cache_line_size set to 64 bytes [ 1.020589] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 1.020591] e820: reserve RAM buffer [mem 0x966ab000-0x97ffffff] [ 1.020593] e820: reserve RAM buffer [mem 0x97c10000-0x97ffffff] [ 1.020594] e820: reserve RAM buffer [mem 0x45d800000-0x45fffffff] [ 1.020752] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.020757] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 1.023520] clocksource: Switched to clocksource tsc-early [ 1.023523] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023524] Tracing disabled due to lockdown [ 1.023525] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023525] Tracing disabled due to lockdown [ 1.023526] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023527] Tracing disabled due to lockdown [ 1.023529] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023529] Tracing disabled due to lockdown [ 1.023530] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023531] Tracing disabled due to lockdown [ 1.023532] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 1.023532] Tracing disabled due to lockdown [ 1.023606] VFS: Disk quotas dquot_6.6.0 [ 1.023630] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.023777] AppArmor: AppArmor Filesystem Enabled [ 1.023793] pnp: PnP ACPI init [ 1.023921] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 1.023927] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.024482] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.024484] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved [ 1.024486] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 1.024491] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 1.024494] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 1.024496] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved [ 1.024498] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 1.024503] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.025080] system 00:02: [io 0x2000-0x20fe] has been reserved [ 1.025085] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.025336] system 00:03: [io 0x0680-0x069f] has been reserved [ 1.025338] system 00:03: [io 0x164e-0x164f] has been reserved [ 1.025342] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.025423] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.025582] system 00:05: [io 0x1854-0x1857] has been reserved [ 1.025586] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.025614] pnp 00:06: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 1.025638] pnp 00:07: Plug and Play ACPI device, IDs SYN3091 SYN0100 SYN0002 PNP0f13 (active) [ 1.025724] system 00:08: [io 0x0200-0x027f] has been reserved [ 1.025727] system 00:08: [mem 0xfedf0000-0xfedfffff] has been reserved [ 1.025731] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.026660] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.027624] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.027626] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.027628] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.027630] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 1.027631] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.027633] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.027635] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.027637] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.027642] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.028016] pnp: PnP ACPI: found 11 devices [ 1.029645] thermal_sys: Registered thermal governor 'fair_share' [ 1.029646] thermal_sys: Registered thermal governor 'bang_bang' [ 1.029647] thermal_sys: Registered thermal governor 'step_wise' [ 1.029648] thermal_sys: Registered thermal governor 'user_space' [ 1.034165] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.034213] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 1.034217] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 1000 [ 1.034219] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 2000 [ 1.034232] pci 0000:00:15.0: BAR 0: assigned [mem 0x4022110000-0x4022110fff 64bit] [ 1.034297] pci 0000:00:15.1: BAR 0: assigned [mem 0x4022111000-0x4022111fff 64bit] [ 1.034350] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x5fff] [ 1.034354] pci 0000:01:00.0: BAR 13: assigned [io 0x4000-0x4fff] [ 1.034357] pci 0000:02:01.0: BAR 13: assigned [io 0x4000-0x4fff] [ 1.034359] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.034367] pci 0000:02:00.0: bridge window [mem 0xc6000000-0xc60fffff] [ 1.034377] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 1.034380] pci 0000:02:01.0: bridge window [io 0x4000-0x4fff] [ 1.034385] pci 0000:02:01.0: bridge window [mem 0xb0000000-0xc5efffff] [ 1.034390] pci 0000:02:01.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034397] pci 0000:02:02.0: PCI bridge to [bus 39] [ 1.034403] pci 0000:02:02.0: bridge window [mem 0xc5f00000-0xc5ffffff] [ 1.034413] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 1.034415] pci 0000:01:00.0: bridge window [io 0x4000-0x4fff] [ 1.034421] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc60fffff] [ 1.034425] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034432] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 1.034434] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff] [ 1.034438] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xc60fffff] [ 1.034441] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034446] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 1.034450] pci 0000:00:1c.7: bridge window [mem 0xc8100000-0xc81fffff] [ 1.034457] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 1.034461] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc80fffff] [ 1.034474] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.034477] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.034478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.034480] pci_bus 0000:00: resource 7 [mem 0x9e800000-0xefffffff window] [ 1.034481] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 1.034483] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] [ 1.034485] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff] [ 1.034486] pci_bus 0000:01: resource 1 [mem 0xb0000000-0xc60fffff] [ 1.034487] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034489] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 1.034490] pci_bus 0000:02: resource 1 [mem 0xb0000000-0xc60fffff] [ 1.034492] pci_bus 0000:02: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034493] pci_bus 0000:03: resource 1 [mem 0xc6000000-0xc60fffff] [ 1.034495] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 1.034496] pci_bus 0000:04: resource 1 [mem 0xb0000000-0xc5efffff] [ 1.034498] pci_bus 0000:04: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 1.034499] pci_bus 0000:39: resource 1 [mem 0xc5f00000-0xc5ffffff] [ 1.034501] pci_bus 0000:3a: resource 1 [mem 0xc8100000-0xc81fffff] [ 1.034502] pci_bus 0000:3b: resource 1 [mem 0xc8000000-0xc80fffff] [ 1.034706] NET: Registered protocol family 2 [ 1.034881] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.034912] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.035114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.035346] TCP: Hash tables configured (established 131072 bind 65536) [ 1.035383] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.035436] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.035538] NET: Registered protocol family 1 [ 1.035545] NET: Registered protocol family 44 [ 1.035558] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.036975] PCI: CLS 128 bytes, default 64 [ 1.037025] Trying to unpack rootfs image as initramfs... [ 2.155055] Freeing initrd memory: 39656K [ 2.155130] DMAR: No ATSR found [ 2.155195] DMAR: dmar0: Using Queued invalidation [ 2.155199] DMAR: dmar1: Using Queued invalidation [ 2.155807] pci 0000:00:00.0: Adding to iommu group 0 [ 2.161875] pci 0000:00:02.0: Adding to iommu group 1 [ 2.162164] pci 0000:00:02.0: Using iommu direct mapping [ 2.162218] pci 0000:00:04.0: Adding to iommu group 2 [ 2.162304] pci 0000:00:12.0: Adding to iommu group 3 [ 2.162374] pci 0000:00:13.0: Adding to iommu group 4 [ 2.162523] pci 0000:00:14.0: Adding to iommu group 5 [ 2.162539] pci 0000:00:14.2: Adding to iommu group 5 [ 2.162623] pci 0000:00:15.0: Adding to iommu group 6 [ 2.162639] pci 0000:00:15.1: Adding to iommu group 6 [ 2.162733] pci 0000:00:16.0: Adding to iommu group 7 [ 2.162750] pci 0000:00:16.3: Adding to iommu group 7 [ 2.162851] pci 0000:00:1c.0: Adding to iommu group 8 [ 2.162852] pci 0000:00:1c.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.162938] pci 0000:00:1c.7: Adding to iommu group 9 [ 2.163017] pci 0000:00:1d.0: Adding to iommu group 10 [ 2.165524] pci 0000:00:1f.0: Adding to iommu group 11 [ 2.165558] pci 0000:00:1f.3: Adding to iommu group 11 [ 2.165573] pci 0000:00:1f.4: Adding to iommu group 11 [ 2.165589] pci 0000:00:1f.5: Adding to iommu group 11 [ 2.165604] pci 0000:00:1f.6: Adding to iommu group 11 [ 2.165689] pci 0000:01:00.0: Adding to iommu group 12 [ 2.165691] pci 0000:01:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.165767] pci 0000:02:00.0: Adding to iommu group 13 [ 2.165768] pci 0000:02:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.165853] pci 0000:02:01.0: Adding to iommu group 14 [ 2.165855] pci 0000:02:01.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.165928] pci 0000:02:02.0: Adding to iommu group 15 [ 2.165929] pci 0000:02:02.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.166048] pci 0000:03:00.0: Adding to iommu group 16 [ 2.166050] pci 0000:03:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.166142] pci 0000:39:00.0: Adding to iommu group 17 [ 2.166144] pci 0000:39:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 2.166229] pci 0000:3a:00.0: Adding to iommu group 18 [ 2.166307] pci 0000:3b:00.0: Adding to iommu group 19 [ 2.166553] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 2.166554] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.166557] software IO TLB: mapped [mem 0x8d6ff000-0x916ff000] (64MB) [ 2.167084] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 2.167085] Tracing disabled due to lockdown [ 2.167086] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 2.167087] Can not register tracer mmiotrace due to lockdown [ 2.167088] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot [ 2.167089] Can not register tracer blk due to lockdown [ 2.167090] Warning: could not register the block tracer [ 2.167250] Initialise system trusted keyrings [ 2.167262] Key type blacklist registered [ 2.167313] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 2.169109] zbud: loaded [ 2.169385] Platform Keyring initialized [ 2.169388] Key type asymmetric registered [ 2.169389] Asymmetric key parser 'x509' registered [ 2.169398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.169461] io scheduler mq-deadline registered [ 2.171828] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 2.171862] pcieport 0000:00:1c.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.172327] pcieport 0000:00:1c.7: PME: Signaling with IRQ 123 [ 2.172648] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 2.173345] pcieport 0000:02:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.173678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.173699] efifb: probing for efifb [ 2.173715] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k [ 2.173717] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 2.173717] efifb: scrolling: redraw [ 2.173719] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.173822] Console: switching to colour frame buffer device 240x67 [ 2.179758] fb0: EFI VGA frame buffer device [ 2.179778] intel_idle: MWAIT substates: 0x11142120 [ 2.179784] intel_idle: v0.4.1 model 0x8E [ 2.180394] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.181345] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.181347] ACPI: Thermal Zone [HEPZ] (30 C) [ 2.189475] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.189477] ACPI: Thermal Zone [CPUZ] (18 C) [ 2.196028] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.196030] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.200338] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.200340] ACPI: Thermal Zone [EXTZ] (28 C) [ 2.204465] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.204467] ACPI: Thermal Zone [LOCZ] (27 C) [ 2.211167] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.211169] ACPI: Thermal Zone [BATZ] (23 C) [ 2.211209] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20190816/exoparg2-396) [ 2.211284] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-531) [ 2.211341] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-531) [ 2.212717] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20190816/exoparg2-396) [ 2.212788] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-531) [ 2.212844] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-531) [ 2.212904] [Firmware Bug]: No valid trip found [ 2.217110] thermal LNXTHERM:07: registered as thermal_zone6 [ 2.217112] ACPI: Thermal Zone [PCHZ] (0 C) [ 2.217425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.218325] serial 0000:00:13.0: enabling device (0000 -> 0002) [ 2.218791] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 2.239799] 0000:00:16.3: ttyS0 at I/O 0x3060 (irq = 19, base_baud = 115200) is a 16550A [ 2.240240] Linux agpgart interface v0.103 [ 2.240328] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 2.240329] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 2.241136] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.241947] i8042: Detected active multiplexing controller, rev 1.1 [ 2.242317] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.242323] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.242354] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.242378] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.242400] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.242725] mousedev: PS/2 mouse device common for all mice [ 2.242793] rtc_cmos 00:04: RTC can wake from S4 [ 2.243692] rtc_cmos 00:04: registered as rtc0 [ 2.243713] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.243725] intel_pstate: Intel P-state driver initializing [ 2.244435] intel_pstate: HWP enabled [ 2.245009] ledtrig-cpu: registered to indicate activity on CPUs [ 2.245194] drop_monitor: Initializing network drop monitor service [ 2.245396] NET: Registered protocol family 10 [ 2.255628] Segment Routing with IPv6 [ 2.255645] mip6: Mobile IPv6 [ 2.255646] NET: Registered protocol family 17 [ 2.255775] mpls_gso: MPLS GSO support [ 2.256545] microcode: sig=0x806ec, pf=0x80, revision=0xc6 [ 2.256834] microcode: Microcode Update Driver: v2.2. [ 2.256851] IPI shorthand broadcast: enabled [ 2.256856] sched_clock: Marking stable (2251411999, 5095031)->(2263674899, -7167869) [ 2.257302] registered taskstats version 1 [ 2.257303] Loading compiled-in X.509 certificates [ 2.267226] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.289163] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.289178] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 2.289202] zswap: loaded using pool lzo/zbud [ 2.289477] Key type ._fscrypt registered [ 2.289478] Key type .fscrypt registered [ 2.289492] AppArmor: AppArmor sha1 policy hashing enabled [ 2.290611] integrity: Loading X.509 certificate: UEFI:db [ 2.290662] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 2.290663] integrity: Loading X.509 certificate: UEFI:db [ 2.290682] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 2.290682] integrity: Loading X.509 certificate: UEFI:db [ 2.290700] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 2.293862] rtc_cmos 00:04: setting system clock to 2020-02-04T08:45:33 UTC (1580805933) [ 2.293903] Lockdown: swapper/0: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 2.294657] Freeing unused kernel image memory: 1660K [ 2.350782] Write protecting the kernel read-only data: 16384k [ 2.352019] Freeing unused kernel image memory: 2036K [ 2.352334] Freeing unused kernel image memory: 348K [ 2.360488] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.360490] Run /init as init process [ 2.475413] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 2.475456] ACPI: Sleep Button [SLPB] [ 2.475546] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 [ 2.475581] ACPI: Lid Switch [LID] [ 2.475640] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 [ 2.475662] ACPI: Power Button [PWRB] [ 2.475764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 2.475848] ACPI: Power Button [PWRF] [ 2.493120] acpi PNP0C14:01: duplicate WMI GUID HASH_221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.493188] acpi PNP0C14:02: duplicate WMI GUID HASH_221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.496311] hidraw: raw HID events driver (C) Jiri Kosina [ 2.506902] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 2.509692] pps_core: LinuxPPS API ver. 1 registered [ 2.509693] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 2.510808] ACPI: bus type USB registered [ 2.510834] usbcore: registered new interface driver usbfs [ 2.510845] usbcore: registered new interface driver hub [ 2.510885] usbcore: registered new device driver usb [ 2.512423] PTP clock support registered [ 2.521475] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 2.521541] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 2.524383] cryptd: max_cpu_qlen set to 1000 [ 2.524769] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 2.526340] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.532914] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.532915] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.533084] nvme nvme0: pci function 0000:3b:00.0 [ 2.547479] AVX2 version of gcm_enc/dec engaged. [ 2.547480] AES CTR mode by8 optimization enabled [ 2.551589] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.551957] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.551966] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.553153] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 2.553159] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported [ 2.553411] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.553413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.553415] usb usb1: Product: xHCI Host Controller [ 2.553416] usb usb1: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 2.553417] usb usb1: SerialNumber: ... [ 2.580155] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 2.580340] hub 1-0:1.0: USB hub found [ 2.580363] hub 1-0:1.0: 12 ports detected [ 2.612803] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.617986] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.617991] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.617995] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.618375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 2.618376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.618378] usb usb2: Product: xHCI Host Controller [ 2.618379] usb usb2: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 2.618380] usb usb2: SerialNumber: ... [ 2.618519] hub 2-0:1.0: USB hub found [ 2.618532] hub 2-0:1.0: 6 ports detected [ 2.619905] usb: port power management may be unreliable [ 2.623129] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 2.623136] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 2.624486] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 2.624990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.624992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.624993] usb usb3: Product: xHCI Host Controller [ 2.624994] usb usb3: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 2.624996] usb usb3: SerialNumber: ... [ 2.625398] hub 3-0:1.0: USB hub found [ 2.625423] hub 3-0:1.0: 2 ports detected [ 2.628370] battery: ACPI: Battery Slot [BAT0] (battery present) [ 2.630352] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 2.630356] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 2.630359] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.630416] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 2.630418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.630419] usb usb4: Product: xHCI Host Controller [ 2.630420] usb usb4: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 2.630421] usb usb4: SerialNumber: ... [ 2.630583] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.630617] hub 4-0:1.0: USB hub found [ 2.630631] hub 4-0:1.0: 2 ports detected [ 2.635200] i915 0000:00:02.0: VT-d active for gfx access [ 2.635203] checking generic (a0000000 7e9000) vs hw (a0000000 10000000) [ 2.635204] fb0: switching to inteldrmfb from EFI VGA [ 2.635283] Console: switching to colour dummy device 80x25 [ 2.635320] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.637459] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.637460] [drm] Driver supports precise vblank timestamp query. [ 2.639794] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.639834] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2) [ 2.639838] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 2.639841] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2 [ 2.639843] i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management. [ 2.639844] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 2.647587] i2c_hid i2c-SYNA3091:00: i2c-SYNA3091:00 supply vdd not found, using dummy regulator [ 2.647602] i2c_hid i2c-SYNA3091:00: i2c-SYNA3091:00 supply vddl not found, using dummy regulator [ 2.660743] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 2.664698] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.665163] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 2.680068] fbcon: i915drmfb (fb0) is primary device [ 2.696791] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 2.696793] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.696899] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 2.697777] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.798859] nvme nvme0: 8/0/0 default/read/poll queues [ 2.803821] nvme0n1: p1 p2 p3 p4 p5 p6 [ 2.950558] usb 1-8: new full-speed USB device number 2 using xhci_hcd [ 3.100742] usb 1-8: New USB device found, idVendor=06cb, idProduct=00b7, bcdDevice= 1.64 [ 3.100746] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.100748] usb 1-8: SerialNumber: ... [ 3.182592] tsc: Refined TSC clocksource calibration: 1895.995 MHz [ 3.182603] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8c8f6b19, max_idle_ns: 881590456694 ns [ 3.182679] clocksource: Switched to clocksource tsc [ 3.230565] usb 1-9: new high-speed USB device number 3 using xhci_hcd [ 3.430170] usb 1-9: New USB device found, idVendor=0408, idProduct=5343, bcdDevice= 0.11 [ 3.430174] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 3.430177] usb 1-9: Product: HP HD Camera [ 3.430179] usb 1-9: Manufacturer: Quanta [ 3.430181] usb 1-9: SerialNumber: ... [ 3.478718] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10 [ 3.562753] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 3.713489] usb 1-10: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 3.713496] usb 1-10: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 3.713510] usb 1-10: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 3.713514] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.848278] Console: switching to colour frame buffer device 240x67 [ 3.871853] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 3.890037] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input13 [ 3.890759] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input14 [ 3.890942] hid-generic 0018:06CB:82F5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 4.283847] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 4.318054] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 4.318071] psmouse serio3: synaptics: Your touchpad (PNP: SYN3091 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 4.379834] psmouse serio3: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00523/0x840300/0x12e800/0x500000, board id: 3352, fw id: 2888704 [ 4.419377] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input12 [ 8.120739] ish-hid {HASH_D58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 8.122761] hid-generic 001F:8087:0AC2.0002: hidraw1: <UNKNOWN> HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 8.340383] device-mapper: uevent: version 1.0.3 [ 8.340617] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 32.739163] NET: Registered protocol family 38 [ 33.213951] Lockdown: resume: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 33.300531] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 33.345435] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 33.418163] systemd[1]: Inserted module 'autofs4' [ 33.627125] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 33.646992] systemd[1]: Detected architecture x86-64. [ 33.663837] systemd[1]: Set hostname to ... [ 33.664464] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 33.664534] Lockdown: systemd: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 33.984182] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 33.984301] systemd[1]: Listening on Journal Audit Socket. [ 33.984451] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 33.984527] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 33.984669] systemd[1]: Created slice User and Session Slice. [ 33.984680] systemd[1]: Reached target Slices. [ 34.009362] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro [ 34.009974] lp: driver loaded but no devices found [ 34.015730] ppdev: user-space parallel port driver [ 34.104152] systemd-journald[484]: Received request to flush runtime journal from PID 1 [ 34.127498] ACPI: AC Adapter [AC] (off-line) [ 34.128692] input: HP Wireless hotkeys as /devices/virtual/input/input17 [ 34.150109] tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22) [ 34.186145] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 34.204494] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 34.205948] iTCO_vendor_support: vendor-support=0 [ 34.206046] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 34.207712] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 34.207802] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 34.207969] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 34.208340] intel_rapl_common: Found RAPL domain package [ 34.208342] intel_rapl_common: Found RAPL domain dram [ 34.212253] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 34.215185] mc: Linux media interface: v0.10 [ 34.283931] EFI Variables Facility v0.08 2004-May-17 [ 34.287513] input: PC Speaker as /devices/platform/pcspkr/input/input18 [ 34.287805] intel_rapl_common: Found RAPL domain package [ 34.287807] intel_rapl_common: Found RAPL domain core [ 34.287808] intel_rapl_common: Found RAPL domain uncore [ 34.287809] intel_rapl_common: Found RAPL domain dram [ 34.339929] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 34.339930] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 34.339931] RAPL PMU: hw unit of domain package 2^-14 Joules [ 34.339931] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 34.339932] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 34.339932] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 34.369143] videodev: Linux video capture interface: v2.00 [ 34.382999] pstore: Using crash dump compression: deflate [ 34.383025] pstore: Registered efi as persistent store backend [ 34.401731] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input19 [ 34.419938] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input20 [ 34.426800] hid-multitouch 0018:06CB:82F5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 34.496118] uvcvideo: Found UVC 1.50 device HP HD Camera (0408:5343) [ 34.511650] uvcvideo 1-9:1.0: Entity type for entity Microsoft Extended Controls Uni was not initialized! [ 34.511654] uvcvideo 1-9:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized! [ 34.511656] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized! [ 34.511658] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized! [ 34.511661] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized! [ 34.511800] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input23 [ 34.513644] uvcvideo: Found UVC 1.50 device HP HD Camera (0408:5343) [ 34.519667] uvcvideo 1-9:1.2: Entity type for entity Microsoft Extended Controls Uni was not initialized! [ 34.519671] uvcvideo 1-9:1.2: Entity type for entity Extension 9 was not initialized! [ 34.519673] uvcvideo 1-9:1.2: Entity type for entity Extension 11 was not initialized! [ 34.519675] uvcvideo 1-9:1.2: Entity type for entity Camera 8 was not initialized! [ 34.519812] input: HP HD Camera: HP IR Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/input/input24 [ 34.519900] usbcore: registered new interface driver uvcvideo [ 34.519901] USB Video Class driver (1.1.1) [ 34.532261] hp_wmi: query 0x4 returned error 0x5 [ 34.534213] hp_wmi: query 0x4 returned error 0x5 [ 34.536226] hp_wmi: query 0xd returned error 0x5 [ 34.536297] input: HP WMI hotkeys as /devices/virtual/input/input22 [ 34.539372] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 34.548189] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 34.549853] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 34.554673] Adding 16601084k swap on /dev/mapper/XXXXXXXXXXXX Priority:-2 extents:1 across:16601084k SSFS [ 34.563539] hp_wmi: query 0x1b returned error 0x5 [ 34.574318] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) [ 34.577866] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 34.774697] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC215: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 34.774705] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 34.774710] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 34.774714] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 34.774717] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 34.774722] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 34.790125] Bluetooth: Core ver 2.22 [ 34.790157] NET: Registered protocol family 31 [ 34.790159] Bluetooth: HCI device and connection manager initialized [ 34.790166] Bluetooth: HCI socket layer initialized [ 34.790171] Bluetooth: L2CAP socket layer initialized [ 34.790178] Bluetooth: SCO socket layer initialized [ 34.790226] Intel(R) Wireless WiFi driver for Linux [ 34.790228] Copyright(c) 2003- 2015 Intel Corporation [ 34.791411] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002) [ 34.799329] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-cc-a0-50.ucode (-2) [ 34.799410] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2 [ 34.799443] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-cc-a0-49.ucode (-2) [ 34.799511] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2 [ 34.803790] iwlwifi 0000:3a:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [ 34.803821] iwlwifi 0000:3a:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 34.803829] iwlwifi 0000:3a:00.0: Found debug destination: EXTERNAL_DRAM [ 34.803833] iwlwifi 0000:3a:00.0: Found debug configuration: 0 [ 34.804472] iwlwifi 0000:3a:00.0: loaded firmware version 48.13675109.0 op_mode iwlmvm [ 34.896734] usbcore: registered new interface driver btusb [ 34.906500] Bluetooth: hci0: Firmware revision 0.0 build 4 week 13 2019 [ 34.914870] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 34.915061] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 34.915254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 34.915425] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 34.915603] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 34.915764] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 34.915929] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 34.916097] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32 [ 35.050905] iwlwifi 0000:3a:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 35.065596] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 35.065938] iwlwifi 0000:3a:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 35.159706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.159707] Bluetooth: BNEP filters: protocol multicast [ 35.159712] Bluetooth: BNEP socket layer initialized [ 35.230775] iwlwifi 0000:3a:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 35.246018] thermal thermal_zone13: failed to read out thermal zone (-61) [ 35.248488] iwlwifi 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 35.531510] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 35.696897] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 35.737344] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 35.902393] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 37.818538] Bluetooth: RFCOMM TTY layer initialized [ 37.818557] Bluetooth: RFCOMM socket layer initialized [ 37.818568] Bluetooth: RFCOMM ver 1.11 [ 39.143048] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 40.213329] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 40.218799] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 40.244852] wlp58s0: authenticated [ 40.250591] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 40.255344] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 40.260229] wlp58s0: associated [ 40.324520] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 47.804991] broken atomic modeset userspace detected, disabling atomic [ 49.229095] fuse: init (API version 7.31) [ 49.728583] show_signal: 11 callbacks suppressed [ 49.728588] traps: light-locker[1363] trap int3 ip:7fad9f8bbc75 sp:7ffe341fde60 error:0 in libglib-2.0.so.0.5800.3[7fad9f883000+7e000] [ 792.934005] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 792.943744] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 792.972063] PM: suspend entry (deep) [ 792.975199] Filesystems sync: 0.003 seconds [ 792.975703] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [ 792.975809] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 792.979898] OOM killer disabled. [ 792.979899] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 792.981301] printk: Suspending console(s) (use no_console_suspend to debug) [ 792.981976] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 793.104973] e1000e: EEE TX LPI TIMER: 00000011 [ 794.654901] ACPI: EC: interrupt blocked [ 794.759778] ACPI: Preparing to enter system sleep state S3 [ 794.761971] ACPI: EC: event blocked [ 794.761972] ACPI: EC: EC stopped [ 794.761974] PM: Saving platform NVS memory [ 794.762015] Disabling non-boot CPUs ... [ 794.762811] IRQ 164: no longer affine to CPU1 [ 794.763856] smpboot: CPU 1 is now offline [ 794.768552] IRQ 165: no longer affine to CPU2 [ 794.769572] smpboot: CPU 2 is now offline [ 794.771937] IRQ 166: no longer affine to CPU3 [ 794.772951] smpboot: CPU 3 is now offline [ 794.775243] IRQ 167: no longer affine to CPU4 [ 794.776655] smpboot: CPU 4 is now offline [ 794.778933] IRQ 168: no longer affine to CPU5 [ 794.779941] smpboot: CPU 5 is now offline [ 794.782058] IRQ 169: no longer affine to CPU6 [ 794.783081] smpboot: CPU 6 is now offline [ 794.785538] IRQ 170: no longer affine to CPU7 [ 794.786561] smpboot: CPU 7 is now offline [ 794.792227] ACPI: Low-level resume complete [ 794.792344] ACPI: EC: EC started [ 794.792345] PM: Restoring platform NVS memory [ 794.793628] Enabling non-boot CPUs ... [ 794.793678] x86: Booting SMP configuration: [ 794.793680] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 794.794693] CPU1 is up [ 794.794730] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 794.795383] CPU2 is up [ 794.795399] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 794.795904] CPU3 is up [ 794.795919] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 794.796513] CPU4 is up [ 794.796536] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 794.797046] CPU5 is up [ 794.797062] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 794.797585] CPU6 is up [ 794.797600] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 794.798131] CPU7 is up [ 794.800382] ACPI: Waking up from system sleep state S3 [ 794.807758] hp_wmi: Unknown event_id - 23 - 0x0 [ 794.872283] ACPI: EC: interrupt unblocked [ 794.990775] ACPI: EC: event unblocked [ 795.000403] hp_wmi: Unknown event_id - 23 - 0x1 [ 795.013403] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 795.113603] nvme nvme0: 8/0/0 default/read/poll queues [ 795.177847] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 795.247425] usb 1-8: reset full-speed USB device number 2 using xhci_hcd [ 795.523403] usb 1-9: reset high-speed USB device number 3 using xhci_hcd [ 795.799427] usb 1-10: reset full-speed USB device number 4 using xhci_hcd [ 795.960339] acpi LNXPOWER:07: Turning OFF [ 795.960591] acpi LNXPOWER:03: Turning OFF [ 795.963225] OOM killer enabled. [ 795.963227] Restarting tasks ... [ 795.963307] pci_bus 0000:03: Allocating resources [ 795.963332] pci_bus 0000:39: Allocating resources [ 795.966712] pci_bus 0000:03: Allocating resources [ 795.966757] pci_bus 0000:39: Allocating resources [ 795.967199] done. [ 796.067389] PM: suspend exit [ 796.189471] e1000e: enp0s31f6 NIC Link is Down [ 796.346363] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 796.378593] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 796.482168] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 796.483172] Bluetooth: hci0: Device revision is 1 [ 796.483177] Bluetooth: hci0: Secure boot is enabled [ 796.483179] Bluetooth: hci0: OTP lock is enabled [ 796.483182] Bluetooth: hci0: API lock is enabled [ 796.483184] Bluetooth: hci0: Debug lock is disabled [ 796.483188] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 796.488858] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi [ 796.488867] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 798.209642] Bluetooth: hci0: Waiting for firmware download to complete [ 798.210267] Bluetooth: hci0: Firmware loaded in 1689082 usecs [ 798.210337] Bluetooth: hci0: Waiting for device to boot [ 798.223102] Bluetooth: hci0: Device booted in 12485 usecs [ 798.232289] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc [ 798.232298] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 798.247173] Bluetooth: hci0: Applying Intel DDC parameters completed [ 798.331151] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 800.538954] ish-hid {HASH_D58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 801.399158] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 801.403239] usb 1-5: new low-speed USB device number 6 using xhci_hcd [ 801.531180] usb 1-5: device descriptor read/64, error -71 [ 801.767133] usb 1-5: device descriptor read/64, error -71 [ 802.003152] usb 1-5: new low-speed USB device number 7 using xhci_hcd [ 802.131175] usb 1-5: device descriptor read/64, error -71 [ 802.367187] usb 1-5: device descriptor read/64, error -71 [ 802.475218] usb usb1-port5: attempt power cycle [ 802.543520] pcieport 0000:02:01.0: pciehp: Slot(1): Card present [ 802.543524] pcieport 0000:02:01.0: pciehp: Slot(1): Link Up [ 802.679227] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 [ 802.679381] pci 0000:04:00.0: enabling Extended Tags [ 802.679689] pci 0000:04:00.0: supports D1 D2 [ 802.679692] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 802.679832] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:02:01.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 802.680175] pci 0000:04:00.0: Adding to iommu group 20 [ 802.680179] pci 0000:04:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 802.691311] pci 0000:04:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 802.691559] pci 0000:05:01.0: [8086:15d3] type 01 class 0x060400 [ 802.691730] pci 0000:05:01.0: enabling Extended Tags [ 802.691960] pci 0000:05:01.0: supports D1 D2 [ 802.691962] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 802.692248] pci 0000:05:01.0: Adding to iommu group 21 [ 802.692250] pci 0000:05:01.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 802.692382] pci 0000:04:00.0: PCI bridge to [bus 05-38] [ 802.692397] pci 0000:04:00.0: bridge window [io 0x0000-0x0fff] [ 802.692404] pci 0000:04:00.0: bridge window [mem 0x00000000-0x000fffff] [ 802.692417] pci 0000:04:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 802.692422] pci 0000:05:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 802.692610] pci 0000:06:00.0: [1b73:1100] type 00 class 0x0c0330 [ 802.692683] pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 802.692716] pci 0000:06:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 802.692747] pci 0000:06:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 802.692949] pci 0000:06:00.0: supports D1 [ 802.692950] pci 0000:06:00.0: PME# supported from D0 D1 D3hot D3cold [ 802.693142] pci 0000:06:00.0: Adding to iommu group 21 [ 802.693144] pci 0000:06:00.0: DMAR: Use Intel IOMMU bounce page dma_ops [ 802.703258] pci 0000:05:01.0: PCI bridge to [bus 06-38] [ 802.703278] pci 0000:05:01.0: bridge window [io 0x0000-0x0fff] [ 802.703288] pci 0000:05:01.0: bridge window [mem 0x00000000-0x000fffff] [ 802.703304] pci 0000:05:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 802.703311] pci_bus 0000:06: busn_res: [bus 06-38] end is updated to 06 [ 802.703324] pci_bus 0000:05: busn_res: [bus 05-38] end is updated to 06 [ 802.703350] pci 0000:04:00.0: BAR 14: assigned [mem 0xb0000000-0xb00fffff] [ 802.703354] pci 0000:04:00.0: BAR 15: assigned [mem 0x4000000000-0x40000fffff 64bit pref] [ 802.703358] pci 0000:04:00.0: BAR 13: assigned [io 0x4000-0x4fff] [ 802.703364] pci 0000:05:01.0: BAR 14: assigned [mem 0xb0000000-0xb00fffff] [ 802.703367] pci 0000:05:01.0: BAR 15: assigned [mem 0x4000000000-0x40000fffff 64bit pref] [ 802.703371] pci 0000:05:01.0: BAR 13: assigned [io 0x4000-0x4fff] [ 802.703378] pci 0000:06:00.0: BAR 0: assigned [mem 0xb0000000-0xb000ffff 64bit] [ 802.703412] pci 0000:06:00.0: BAR 2: assigned [mem 0xb0010000-0xb0010fff 64bit] [ 802.703443] pci 0000:06:00.0: BAR 4: assigned [mem 0xb0011000-0xb0011fff 64bit] [ 802.703475] pci 0000:05:01.0: PCI bridge to [bus 06] [ 802.703481] pci 0000:05:01.0: bridge window [io 0x4000-0x4fff] [ 802.703494] pci 0000:05:01.0: bridge window [mem 0xb0000000-0xb00fffff] [ 802.703503] pci 0000:05:01.0: bridge window [mem 0x4000000000-0x40000fffff 64bit pref] [ 802.703518] pci 0000:04:00.0: PCI bridge to [bus 05-06] [ 802.703524] pci 0000:04:00.0: bridge window [io 0x4000-0x4fff] [ 802.703536] pci 0000:04:00.0: bridge window [mem 0xb0000000-0xb00fffff] [ 802.703545] pci 0000:04:00.0: bridge window [mem 0x4000000000-0x40000fffff 64bit pref] [ 802.703561] pcieport 0000:02:01.0: PCI bridge to [bus 04-38] [ 802.703565] pcieport 0000:02:01.0: bridge window [io 0x4000-0x4fff] [ 802.703573] pcieport 0000:02:01.0: bridge window [mem 0xb0000000-0xc5efffff] [ 802.703580] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 802.703654] pcieport 0000:04:00.0: enabling device (0000 -> 0003) [ 802.704307] pcieport 0000:05:01.0: enabling device (0000 -> 0003) [ 802.705072] pci 0000:06:00.0: enabling device (0000 -> 0002) [ 802.706251] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 802.706271] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 802.707832] xhci_hcd 0000:06:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x0000000000000010 [ 802.708775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 802.708777] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 802.708779] usb usb5: Product: xHCI Host Controller [ 802.708781] usb usb5: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 802.708783] usb usb5: SerialNumber: ... [ 802.709043] hub 5-0:1.0: USB hub found [ 802.709068] hub 5-0:1.0: 4 ports detected [ 802.709434] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 802.709440] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6 [ 802.709444] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 802.709476] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 802.709505] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 802.709508] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 802.709509] usb usb6: Product: xHCI Host Controller [ 802.709511] usb usb6: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd [ 802.709513] usb usb6: SerialNumber: ... [ 802.709767] hub 6-0:1.0: USB hub found [ 802.709791] hub 6-0:1.0: 4 ports detected [ 803.047099] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 803.099869] hp_wmi: Unknown event_id - 131073 - 0x0 [ 803.131111] usb 1-5: new low-speed USB device number 8 using xhci_hcd [ 803.131522] usb 1-5: Device not responding to setup address. [ 803.242020] usb 5-1: New USB device found, idVendor=043e, idProduct=9a46, bcdDevice=52.37 [ 803.242025] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 803.242028] usb 5-1: Product: USB2.1 Hub [ 803.242031] usb 5-1: Manufacturer: LG Electronics Inc. [ 803.244101] hub 5-1:1.0: USB hub found [ 803.247295] hub 5-1:1.0: 4 ports detected [ 803.339520] usb 1-5: Device not responding to setup address. [ 803.367264] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 803.373883] thunderbolt 0-1: new device found, vendor=0x1e device=0x10 [ 803.373884] thunderbolt 0-1: LG Electronics UltraFine 5K [ 803.391674] usb 6-1: New USB device found, idVendor=043e, idProduct=9a44, bcdDevice=52.37 [ 803.391679] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 803.391683] usb 6-1: Product: USB3.1 Hub [ 803.391686] usb 6-1: Manufacturer: LG Electronics Inc. [ 803.393799] hub 6-1:1.0: USB hub found [ 803.394256] hub 6-1:1.0: 4 ports detected [ 803.547179] usb 1-5: device not accepting address 8, error -71 [ 803.567181] usb 5-1.1: new high-speed USB device number 3 using xhci_hcd [ 803.679094] usb 1-5: new low-speed USB device number 9 using xhci_hcd [ 803.679504] usb 1-5: Device not responding to setup address. [ 803.691438] usb 5-1.1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00 [ 803.691444] usb 5-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 803.691447] usb 5-1.1: Product: USB 2.0 Hub [MTT] [ 803.693431] hub 5-1.1:1.0: USB hub found [ 803.693491] hub 5-1.1:1.0: 7 ports detected [ 803.771158] usb 6-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 803.795761] usb 6-1.4: New USB device found, idVendor=043e, idProduct=9a00, bcdDevice= 1.00 [ 803.795767] usb 6-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 803.797932] hub 6-1.4:1.0: USB hub found [ 803.797994] hub 6-1.4:1.0: 3 ports detected [ 803.887537] usb 1-5: Device not responding to setup address. [ 803.903118] usb 5-1.4: new high-speed USB device number 4 using xhci_hcd [ 804.028087] usb 5-1.4: New USB device found, idVendor=043e, idProduct=9a02, bcdDevice= 1.00 [ 804.028093] usb 5-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 804.028096] usb 5-1.4: SerialNumber: ... [ 804.030497] hub 5-1.4:1.0: USB hub found [ 804.030560] hub 5-1.4:1.0: 3 ports detected [ 804.095090] usb 1-5: device not accepting address 9, error -71 [ 804.095201] usb usb1-port5: unable to enumerate USB device [ 804.131137] usb 5-1.1.1: new low-speed USB device number 5 using xhci_hcd [ 804.269686] usb 5-1.1.1: New USB device found, idVendor=04d9, idProduct=0269, bcdDevice=11.10 [ 804.269690] usb 5-1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 804.269693] usb 5-1.1.1: Product: USB Keyboard [ 804.335167] usb 5-1.4.1: new high-speed USB device number 6 using xhci_hcd [ 804.459402] usb 5-1.4.1: New USB device found, idVendor=043e, idProduct=9a4b, bcdDevice= 0.1e [ 804.459407] usb 5-1.4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 804.459410] usb 5-1.4.1: Product: USB Audio [ 804.459413] usb 5-1.4.1: Manufacturer: LG Electronics Inc. [ 804.539347] usb 5-1.1.2: new low-speed USB device number 7 using xhci_hcd [ 804.594411] usbcore: registered new interface driver snd-usb-audio [ 804.664542] usb 5-1.1.2: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01 [ 804.664545] usb 5-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 804.664547] usb 5-1.1.2: Product: USB Laser Mouse [ 804.664548] usb 5-1.1.2: Manufacturer: Logitech [ 804.702340] input: USB Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:01.0/0000:04:00.0/0000:05:01.0/0000:06:00.0/usb5/5-1/5-1.1/5-1.1.1/5-1.1.1:1.0/0003:04D9:0269.0003/input/input37 [ 804.743241] usb 5-1.4.2: new full-speed USB device number 8 using xhci_hcd [ 804.759683] hid-generic 0003:04D9:0269.0003: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:06:00.0-1.1.1/input0 [ 804.767461] input: USB Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:01.0/0000:04:00.0/0000:05:01.0/0000:06:00.0/usb5/5-1/5-1.1/5-1.1.1/5-1.1.1:1.1/0003:04D9:0269.0004/input/input38 [ 804.831622] hid-generic 0003:04D9:0269.0004: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:06:00.0-1.1.1/input1 [ 804.835572] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:01.0/0000:04:00.0/0000:05:01.0/0000:06:00.0/usb5/5-1/5-1.1/5-1.1.2/5-1.1.2:1.0/0003:046D:C069.0005/input/input39 [ 804.836026] hid-generic 0003:046D:C069.0005: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:06:00.0-1.1.2/input0 [ 804.836126] usbcore: registered new interface driver usbhid [ 804.836128] usbhid: USB HID core driver [ 804.849169] usb 5-1.4.2: New USB device found, idVendor=043e, idProduct=9a40, bcdDevice= 3.04 [ 804.849174] usb 5-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 804.849178] usb 5-1.4.2: Product: USB Controls [ 804.849180] usb 5-1.4.2: Manufacturer: LG Electronics Inc. [ 804.871584] hid-generic 0003:043E:9A40.0006: hiddev0,hidraw4: USB HID v1.11 Device [LG Electronics Inc. USB Controls] on usb-0000:06:00.0-1.4.2/input0 [ 804.872975] hid-generic 0003:043E:9A40.0007: hiddev1,hidraw5: USB HID v1.11 Device [LG Electronics Inc. USB Controls] on usb-0000:06:00.0-1.4.2/input1 [ 804.874607] hid-generic 0003:043E:9A40.0008: hiddev2,hidraw6: USB HID v1.11 Device [LG Electronics Inc. USB Controls] on usb-0000:06:00.0-1.4.2/input2 [ 805.207224] usb 6-1.4.3: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 805.228131] usb 6-1.4.3: LPM exit latency is zeroed, disabling LPM. [ 805.228764] usb 6-1.4.3: New USB device found, idVendor=043e, idProduct=9a4d, bcdDevice= 1.13 [ 805.228769] usb 6-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 805.228772] usb 6-1.4.3: Product: LG UltraFine Display Camera [ 805.228775] usb 6-1.4.3: Manufacturer: LG Electronlcs Inc. [ 805.235183] uvcvideo: Found UVC 1.10 device LG UltraFine Display Camera (043e:9a4d) [ 805.264249] uvcvideo 6-1.4.3:1.0: Entity type for entity Extension 3 was not initialized! [ 805.264254] uvcvideo 6-1.4.3:1.0: Entity type for entity Processing 2 was not initialized! [ 805.264257] uvcvideo 6-1.4.3:1.0: Entity type for entity Camera 1 was not initialized! [ 805.264437] input: LG UltraFine Display Camera as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:01.0/0000:04:00.0/0000:05:01.0/0000:06:00.0/usb6/6-1/6-1.4/6-1.4.3/6-1.4.3:1.0/input/input40 [ 805.265807] hid-generic 0003:043E:9A4D.0009: hiddev3,hidraw7: USB HID v1.01 Device [LG Electronlcs Inc. LG UltraFine Display Camera] on usb-0000:06:00.0-1.4.3/input2 [ 875.078458] pcieport 0000:02:01.0: pciehp: Slot(1): Link Down [ 875.078462] pcieport 0000:02:01.0: pciehp: Slot(1): Card not present [ 875.078494] xhci_hcd 0000:06:00.0: remove, state 4 [ 875.078507] usb usb6: USB disconnect, device number 1 [ 875.078511] usb 6-1: USB disconnect, device number 2 [ 875.078515] usb 6-1.4: USB disconnect, device number 3 [ 875.078518] usb 6-1.4.3: USB disconnect, device number 4 [ 875.148187] xhci_hcd 0000:06:00.0: USB bus 6 deregistered [ 875.148294] xhci_hcd 0000:06:00.0: xHCI host controller not responding, assume dead [ 875.148407] xhci_hcd 0000:06:00.0: remove, state 1 [ 875.148430] usb usb5: USB disconnect, device number 1 [ 875.148434] usb 5-1: USB disconnect, device number 2 [ 875.148437] usb 5-1.1: USB disconnect, device number 3 [ 875.148441] usb 5-1.1.1: USB disconnect, device number 5 [ 875.339788] usb 5-1.1.2: USB disconnect, device number 7 [ 875.416602] usb 5-1.4: USB disconnect, device number 4 [ 875.416607] usb 5-1.4.1: USB disconnect, device number 6 [ 875.417551] usb 5-1.4.2: USB disconnect, device number 8 [ 875.422263] xhci_hcd 0000:06:00.0: Host halt failed, -19 [ 875.422269] xhci_hcd 0000:06:00.0: Host not accessible, reset failed. [ 875.423037] xhci_hcd 0000:06:00.0: USB bus 5 deregistered [ 875.424385] pci 0000:06:00.0: Removing from iommu group 21 [ 875.424449] pci_bus 0000:06: busn_res: [bus 06] is released [ 875.424614] pci 0000:05:01.0: Removing from iommu group 21 [ 875.424810] pci_bus 0000:05: busn_res: [bus 05-06] is released [ 875.424943] pci 0000:04:00.0: Removing from iommu group 20 [ 875.671625] thunderbolt 0-1: device disconnected [ 893.444606] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 893.454559] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 893.485657] PM: suspend entry (deep) [ 893.536321] Filesystems sync: 0.050 seconds [ 893.537071] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.ddc [ 893.537312] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [ 893.537524] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.sfi [ 893.537704] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 893.540615] OOM killer disabled. [ 893.540617] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 893.542255] printk: Suspending console(s) (use no_console_suspend to debug) [ 893.651008] e1000e: EEE TX LPI TIMER: 00000011 [ 893.963955] ACPI: EC: interrupt blocked [ 894.068850] ACPI: Preparing to enter system sleep state S3 [ 894.071041] ACPI: EC: event blocked [ 894.071043] ACPI: EC: EC stopped [ 894.071044] PM: Saving platform NVS memory [ 894.071085] Disabling non-boot CPUs ... [ 894.072883] smpboot: CPU 1 is now offline [ 894.076944] smpboot: CPU 2 is now offline [ 894.081057] smpboot: CPU 3 is now offline [ 894.086000] smpboot: CPU 4 is now offline [ 894.089888] smpboot: CPU 5 is now offline [ 894.093858] smpboot: CPU 6 is now offline [ 894.098117] smpboot: CPU 7 is now offline [ 894.104578] ACPI: Low-level resume complete [ 894.104699] ACPI: EC: EC started [ 894.104700] PM: Restoring platform NVS memory [ 894.105994] Enabling non-boot CPUs ... [ 894.106043] x86: Booting SMP configuration: [ 894.106045] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 894.107054] CPU1 is up [ 894.107082] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 894.107625] CPU2 is up [ 894.107641] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 894.108149] CPU3 is up [ 894.108165] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 894.108763] CPU4 is up [ 894.108785] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 894.109295] CPU5 is up [ 894.109312] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 894.109843] CPU6 is up [ 894.109858] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 894.110402] CPU7 is up [ 894.112657] ACPI: Waking up from system sleep state S3 [ 894.121012] hp_wmi: Unknown event_id - 23 - 0x0 [ 894.124116] hp_wmi: Unknown event_id - 0 - 0x0 [ 894.185849] ACPI: EC: interrupt unblocked [ 894.304537] ACPI: EC: event unblocked [ 894.315286] hp_wmi: Unknown event_id - 23 - 0x1 [ 894.326360] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 894.423128] nvme nvme0: 8/0/0 default/read/poll queues [ 894.490903] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 894.556869] usb 1-10: reset full-speed USB device number 4 using xhci_hcd [ 894.832820] usb 1-9: reset high-speed USB device number 3 using xhci_hcd [ 895.108868] usb 1-8: reset full-speed USB device number 2 using xhci_hcd [ 895.269070] acpi LNXPOWER:07: Turning OFF [ 895.269328] acpi LNXPOWER:03: Turning OFF [ 895.272851] OOM killer enabled. [ 895.272853] Restarting tasks ... [ 895.272930] pci_bus 0000:03: Allocating resources [ 895.272956] pci_bus 0000:39: Allocating resources [ 895.273447] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 895.274476] Bluetooth: hci0: Device revision is 1 [ 895.274479] Bluetooth: hci0: Secure boot is enabled [ 895.274481] Bluetooth: hci0: OTP lock is enabled [ 895.274482] Bluetooth: hci0: API lock is enabled [ 895.274483] Bluetooth: hci0: Debug lock is disabled [ 895.274486] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 895.274493] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 895.277764] done. [ 895.352761] pci_bus 0000:03: Allocating resources [ 895.352789] pci_bus 0000:39: Allocating resources [ 895.378226] PM: suspend exit [ 895.516124] e1000e: enp0s31f6 NIC Link is Down [ 895.666596] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 895.697845] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 897.116398] Bluetooth: hci0: Waiting for firmware download to complete [ 897.117262] Bluetooth: hci0: Firmware loaded in 1801313 usecs [ 897.117348] Bluetooth: hci0: Waiting for device to boot [ 897.130483] Bluetooth: hci0: Device booted in 12904 usecs [ 897.130490] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 897.145448] Bluetooth: hci0: Applying Intel DDC parameters completed [ 897.660545] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 899.872858] ish-hid {HASH_D58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 900.732558] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 1051.714784] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1051.719186] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1051.743892] wlp58s0: authenticated [ 1051.745178] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1051.746789] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1051.753233] wlp58s0: associated [ 1053.852634] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1064.858966] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1064.864615] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1064.888624] wlp58s0: authenticated [ 1064.889243] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1064.890824] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1064.896245] wlp58s0: associated [ 1066.992800] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1090.165773] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1090.170652] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1090.195139] wlp58s0: authenticated [ 1090.197396] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1090.199076] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1090.204896] wlp58s0: associated [ 1092.326159] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1102.976431] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1102.980245] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1103.003396] wlp58s0: authenticated [ 1103.005421] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1103.011983] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 1103.017967] wlp58s0: associated [ 1105.133637] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1254.704884] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1254.709268] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1254.734919] wlp58s0: authenticated [ 1254.742122] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1254.744579] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 1254.753234] wlp58s0: associated [ 1255.022883] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 1272.431935] Non-volatile memory driver v1.3 [ 1272.437221] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1272.437241] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1272.438505] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1272.438720] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1274.286479] SCSI subsystem initialized [ 1274.305527] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1276.399768] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 1276.400538] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 1276.562381] Lockdown: biosdecode: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1287.376492] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1287.385397] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1287.393934] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1287.418106] wlp58s0: authenticated [ 1287.422329] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1287.423970] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1287.429501] wlp58s0: associated [ 1447.025418] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1447.033875] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1447.039051] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1447.063288] wlp58s0: authenticated [ 1447.071129] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1447.072812] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 1447.078293] wlp58s0: associated [ 1466.295426] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1466.295445] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1466.296544] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1466.296744] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1470.098071] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 1470.098705] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 1470.357320] Lockdown: biosdecode: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 1478.577816] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1478.585277] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1478.589758] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1478.614707] wlp58s0: authenticated [ 1478.619283] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1478.621032] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1478.627217] wlp58s0: associated [ 1510.362489] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1510.370261] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1510.376630] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1510.401163] wlp58s0: authenticated [ 1510.403329] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1510.404975] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 1510.410381] wlp58s0: associated [ 1542.347653] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1542.356286] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1542.362101] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1542.386575] wlp58s0: authenticated [ 1542.391473] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1542.393128] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1542.398668] wlp58s0: associated [ 1574.288745] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1574.296331] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1574.301432] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1574.326227] wlp58s0: authenticated [ 1574.327727] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1574.329313] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 1574.335229] wlp58s0: associated [ 1606.656045] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1606.665995] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1606.673210] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1606.698373] wlp58s0: authenticated [ 1606.699777] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1606.701492] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1606.707588] wlp58s0: associated [ 1638.080856] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1638.090772] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1638.096804] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1638.126159] wlp58s0: authenticated [ 1638.127994] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1638.129729] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 1638.135287] wlp58s0: associated [ 1939.934476] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1939.942590] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1939.947336] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1939.972073] wlp58s0: authenticated [ 1939.973347] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1939.974995] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 1939.981084] wlp58s0: associated [ 1971.935681] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 1971.945101] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 1971.951755] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1971.982373] wlp58s0: authenticated [ 1971.989452] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1971.992072] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 1971.998284] wlp58s0: associated [ 2004.204003] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2004.211238] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2004.215974] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2004.242337] wlp58s0: authenticated [ 2004.245222] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2004.246983] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2004.252874] wlp58s0: associated [ 2036.651974] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2036.660606] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2036.665985] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2036.690789] wlp58s0: authenticated [ 2036.694990] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2036.696760] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 2036.702860] wlp58s0: associated [ 2131.142479] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2131.157338] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2131.163587] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2131.187115] wlp58s0: authenticated [ 2131.187799] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2131.189414] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2131.194593] wlp58s0: associated [ 2227.044751] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2227.053629] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2227.060213] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2227.084738] wlp58s0: authenticated [ 2227.090600] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2227.092401] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 2227.098753] wlp58s0: associated [ 2258.481386] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2258.488557] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2258.493306] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2258.517741] wlp58s0: authenticated [ 2258.518230] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2258.519824] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2258.525336] wlp58s0: associated [ 2289.960318] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2289.966485] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2289.970624] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2289.996991] wlp58s0: authenticated [ 2289.997836] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2289.999480] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 2290.004442] wlp58s0: associated [ 2321.711992] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2321.720248] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2321.725684] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2321.751658] wlp58s0: authenticated [ 2321.753585] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2321.755335] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2321.761188] wlp58s0: associated [ 2417.064162] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2417.071947] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2417.076723] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2417.102773] wlp58s0: authenticated [ 2417.104422] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2417.106228] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 2417.112108] wlp58s0: associated [ 2512.806815] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2512.815342] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2512.820841] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2512.850903] wlp58s0: authenticated [ 2512.851303] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2512.853023] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2512.859109] wlp58s0: associated [ 2671.436788] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 2671.445071] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2671.449741] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2671.474458] wlp58s0: authenticated [ 2671.477634] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2671.479307] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 2671.485308] wlp58s0: associated [ 2980.253426] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 2980.258603] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 2980.270651] PM: suspend entry (deep) [ 2980.282179] Filesystems sync: 0.011 seconds [ 2980.283201] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [ 2980.283470] Freezing user space processes ... (elapsed 0.247 seconds) done. [ 2980.530592] OOM killer disabled. [ 2980.530594] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2980.532425] printk: Suspending console(s) (use no_console_suspend to debug) [ 2980.533333] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2980.639463] e1000e: EEE TX LPI TIMER: 00000011 [ 2982.193602] ACPI: EC: interrupt blocked [ 2982.299325] ACPI: Preparing to enter system sleep state S3 [ 2982.301537] ACPI: EC: event blocked [ 2982.301539] ACPI: EC: EC stopped [ 2982.301540] PM: Saving platform NVS memory [ 2982.301582] Disabling non-boot CPUs ... [ 2982.303397] smpboot: CPU 1 is now offline [ 2982.309419] smpboot: CPU 2 is now offline [ 2982.315221] smpboot: CPU 3 is now offline [ 2982.320679] smpboot: CPU 4 is now offline [ 2982.325468] smpboot: CPU 5 is now offline [ 2982.330059] smpboot: CPU 6 is now offline [ 2982.334815] smpboot: CPU 7 is now offline [ 2982.341230] ACPI: Low-level resume complete [ 2982.341350] ACPI: EC: EC started [ 2982.341351] PM: Restoring platform NVS memory [ 2982.342631] Enabling non-boot CPUs ... [ 2982.342680] x86: Booting SMP configuration: [ 2982.342682] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2982.343678] CPU1 is up [ 2982.343715] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2982.344255] CPU2 is up [ 2982.344272] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 2982.344782] CPU3 is up [ 2982.344798] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 2982.345389] CPU4 is up [ 2982.345408] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 2982.345920] CPU5 is up [ 2982.345936] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 2982.346464] CPU6 is up [ 2982.346479] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 2982.347021] CPU7 is up [ 2982.349259] ACPI: Waking up from system sleep state S3 [ 2982.356476] hp_wmi: Unknown event_id - 23 - 0x0 [ 2982.420716] ACPI: EC: interrupt unblocked [ 2982.538624] ACPI: EC: event unblocked [ 2982.547510] hp_wmi: Unknown event_id - 23 - 0x1 [ 2982.561234] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 2982.657681] nvme nvme0: 8/0/0 default/read/poll queues [ 2982.725236] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 2982.787250] usb 1-8: reset full-speed USB device number 2 using xhci_hcd [ 2983.063235] usb 1-10: reset full-speed USB device number 4 using xhci_hcd [ 2983.339133] usb 1-9: reset high-speed USB device number 3 using xhci_hcd [ 2983.548040] acpi LNXPOWER:07: Turning OFF [ 2983.548292] acpi LNXPOWER:03: Turning OFF [ 2983.553017] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 2983.554167] OOM killer enabled. [ 2983.554169] Restarting tasks ... [ 2983.554297] pci_bus 0000:03: Allocating resources [ 2983.554327] pci_bus 0000:39: Allocating resources [ 2983.556078] pci_bus 0000:03: Allocating resources [ 2983.556107] pci_bus 0000:39: Allocating resources [ 2983.557730] Bluetooth: hci0: Device revision is 1 [ 2983.557734] Bluetooth: hci0: Secure boot is enabled [ 2983.557736] Bluetooth: hci0: OTP lock is enabled [ 2983.557738] Bluetooth: hci0: API lock is enabled [ 2983.557741] Bluetooth: hci0: Debug lock is disabled [ 2983.557745] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 2983.558373] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi [ 2983.558383] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 2983.559937] done. [ 2983.671431] PM: suspend exit [ 2983.785745] e1000e: enp0s31f6 NIC Link is Down [ 2983.919828] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 2983.951018] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 2984.117586] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 2984.283072] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 2984.329993] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 2984.494741] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 2985.458326] Bluetooth: hci0: Waiting for firmware download to complete [ 2985.458843] Bluetooth: hci0: Firmware loaded in 1862495 usecs [ 2985.458999] Bluetooth: hci0: Waiting for device to boot [ 2985.471855] Bluetooth: hci0: Device booted in 12609 usecs [ 2985.471912] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc [ 2985.471918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 2985.486937] Bluetooth: hci0: Applying Intel DDC parameters completed [ 2985.586891] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 2988.088435] ish-hid {HASH_D58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 2988.666743] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 2988.669691] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 2988.674479] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2988.699057] wlp58s0: authenticated [ 2988.702750] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2988.704416] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 2988.710551] wlp58s0: associated [ 2988.948957] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 3084.639368] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3084.648049] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 3084.653177] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3084.679688] wlp58s0: authenticated [ 3084.683858] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3084.685675] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 3084.691787] wlp58s0: associated [ 3306.658457] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3306.665866] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 3306.670625] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3306.695246] wlp58s0: authenticated [ 3306.696864] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3306.698588] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 3306.704600] wlp58s0: associated [ 3338.419668] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3338.427972] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 3338.433840] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3338.458093] wlp58s0: authenticated [ 3338.458535] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3338.460120] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 3338.466365] wlp58s0: associated [ 3370.216252] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3370.224757] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 3370.230255] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3370.254965] wlp58s0: authenticated [ 3370.255358] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3370.257038] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 3370.262835] wlp58s0: associated [ 3529.065692] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3529.077272] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 3529.084756] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3529.109216] wlp58s0: authenticated [ 3529.111742] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3529.113494] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 3529.119856] wlp58s0: associated [ 5691.247081] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 5691.255673] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 5691.260884] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 5691.285416] wlp58s0: authenticated [ 5691.290231] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 5691.291939] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 5691.296852] wlp58s0: associated [ 5722.622984] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 5722.630534] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 5722.635146] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 5722.659397] wlp58s0: authenticated [ 5722.662313] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 5722.663881] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 5722.669159] wlp58s0: associated [ 6008.301190] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6008.308315] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 6008.312950] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6008.339722] wlp58s0: authenticated [ 6008.343802] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6008.345512] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [ 6008.350489] wlp58s0: associated [ 6040.021598] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6040.029612] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 6040.035316] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6040.060069] wlp58s0: authenticated [ 6040.060760] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6040.062417] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6040.068155] wlp58s0: associated [ 6717.864406] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 6724.033843] broken atomic modeset userspace detected, disabling atomic [ 6725.726808] traps: light-locker[20765] trap int3 ip:7f70020fbc75 sp:7fff0f45fca0 error:0 in libglib-2.0.so.0.5800.3[7f70020c3000+7e000] [ 6867.428170] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 6867.434224] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 6867.450351] PM: suspend entry (deep) [ 6867.462828] Filesystems sync: 0.012 seconds [ 6867.463460] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.ddc [ 6867.463718] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [ 6867.463847] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.sfi [ 6867.463954] Freezing user space processes ... (elapsed 0.239 seconds) done. [ 6867.703131] OOM killer disabled. [ 6867.703133] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6867.704662] printk: Suspending console(s) (use no_console_suspend to debug) [ 6867.705942] wlp58s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6867.811569] e1000e: EEE TX LPI TIMER: 00000011 [ 6869.365385] ACPI: EC: interrupt blocked [ 6869.470814] ACPI: Preparing to enter system sleep state S3 [ 6869.473012] ACPI: EC: event blocked [ 6869.473014] ACPI: EC: EC stopped [ 6869.473015] PM: Saving platform NVS memory [ 6869.473055] Disabling non-boot CPUs ... [ 6869.475737] smpboot: CPU 1 is now offline [ 6869.480790] smpboot: CPU 2 is now offline [ 6869.485446] smpboot: CPU 3 is now offline [ 6869.491181] smpboot: CPU 4 is now offline [ 6869.495905] smpboot: CPU 5 is now offline [ 6869.500815] smpboot: CPU 6 is now offline [ 6869.506560] smpboot: CPU 7 is now offline [ 6869.514425] ACPI: Low-level resume complete [ 6869.514544] ACPI: EC: EC started [ 6869.514545] PM: Restoring platform NVS memory [ 6869.515835] Enabling non-boot CPUs ... [ 6869.515887] x86: Booting SMP configuration: [ 6869.515888] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6869.516893] CPU1 is up [ 6869.516933] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6869.517462] CPU2 is up [ 6869.517479] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6869.517990] CPU3 is up [ 6869.518005] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 6869.518626] CPU4 is up [ 6869.518645] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 6869.519158] CPU5 is up [ 6869.519174] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 6869.519698] CPU6 is up [ 6869.519714] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 6869.520246] CPU7 is up [ 6869.522492] ACPI: Waking up from system sleep state S3 [ 6869.529556] hp_wmi: Unknown event_id - 23 - 0x0 [ 6869.595359] ACPI: EC: interrupt unblocked [ 6869.714063] ACPI: EC: event unblocked [ 6869.723299] hp_wmi: Unknown event_id - 23 - 0x1 [ 6869.737617] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 6869.833166] nvme nvme0: 8/0/0 default/read/poll queues [ 6869.901741] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 6869.962851] usb 1-9: reset high-speed USB device number 3 using xhci_hcd [ 6870.238897] usb 1-8: reset full-speed USB device number 2 using xhci_hcd [ 6870.514900] usb 1-10: reset full-speed USB device number 4 using xhci_hcd [ 6870.674024] acpi LNXPOWER:07: Turning OFF [ 6870.674219] acpi LNXPOWER:03: Turning OFF [ 6870.676499] OOM killer enabled. [ 6870.676501] Restarting tasks ... [ 6870.676577] pci_bus 0000:03: Allocating resources [ 6870.676601] pci_bus 0000:39: Allocating resources [ 6870.678945] done. [ 6870.690042] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 6870.693891] Bluetooth: hci0: Device revision is 1 [ 6870.693894] Bluetooth: hci0: Secure boot is enabled [ 6870.693896] Bluetooth: hci0: OTP lock is enabled [ 6870.693897] Bluetooth: hci0: API lock is enabled [ 6870.693898] Bluetooth: hci0: Debug lock is disabled [ 6870.693901] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6870.693906] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 6870.771129] pci_bus 0000:03: Allocating resources [ 6870.771727] pci_bus 0000:39: Allocating resources [ 6870.840901] PM: suspend exit [ 6870.949175] e1000e: enp0s31f6 NIC Link is Down [ 6871.084267] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 6871.115459] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 6871.292294] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 6871.458351] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 6871.506694] iwlwifi 0000:3a:00.0: Applying debug destination EXTERNAL_DRAM [ 6871.672408] iwlwifi 0000:3a:00.0: FW already configured (0) - re-configuring [ 6872.602955] Bluetooth: hci0: Waiting for firmware download to complete [ 6872.603150] Bluetooth: hci0: Firmware loaded in 1880036 usecs [ 6872.603262] Bluetooth: hci0: Waiting for device to boot [ 6872.616179] Bluetooth: hci0: Device booted in 12713 usecs [ 6872.616188] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 6872.631216] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6872.918595] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 6875.258892] ish-hid {HASH_D58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 6875.716912] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 6875.722518] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6875.747125] wlp58s0: authenticated [ 6875.754524] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6875.756042] wlp58s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6875.760738] wlp58s0: associated [ 6875.990542] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device [ 6876.005048] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 6939.376889] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6939.385126] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 6939.390192] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6939.414606] wlp58s0: authenticated [ 6939.418787] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6939.420470] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6939.425802] wlp58s0: associated [ 6970.932717] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6970.940353] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 6970.945835] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6970.975219] wlp58s0: authenticated [ 6970.977594] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6970.979319] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6970.985187] wlp58s0: associated [ 7129.736199] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 7129.746013] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 7129.751417] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7129.775883] wlp58s0: authenticated [ 7129.777115] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7129.778720] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 7129.784116] wlp58s0: associated [ 7288.403472] wlp58s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 7288.412238] wlp58s0: authenticate with XX:XX:XX:XX:XX:XX [ 7288.418116] wlp58s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7288.442539] wlp58s0: authenticated [ 7288.445842] wlp58s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7288.447628] wlp58s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 7288.454191] wlp58s0: associated [ 7293.428304] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 7293.428320] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 7293.429529] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 7293.429705] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot [ 7297.192566] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot [ 7297.193332] Lockdown: systemd-logind: hibernation is restricted; see https://wiki.debian.org/SecureBoot