[ 0.000000] Linux version 6.12.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.12.12-1~bpo12+1 (2025-02-23) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.170 MHz processor [ 0.002416] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002419] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008735] AGP: No AGP bridge found [ 0.008794] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008801] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008803] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010574] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010582] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016058] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] [ 0.016079] Using GB pages for direct mapping [ 0.017520] RAMDISK: [mem 0x28989000-0x304bbfff] [ 0.017529] ACPI: Early table checksum verification disabled [ 0.017532] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017536] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017542] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017547] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.017552] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017556] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017559] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017563] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017566] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017570] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017573] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017577] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017580] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017583] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] [ 0.017585] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] [ 0.017586] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] [ 0.017587] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] [ 0.017589] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] [ 0.017590] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] [ 0.017591] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] [ 0.017592] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] [ 0.017593] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] [ 0.017594] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] [ 0.017664] No NUMA configuration found [ 0.017665] Faking a node at [mem 0x0000000000000000-0x000000063effffff] [ 0.017677] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] [ 0.018041] Zone ranges: [ 0.018042] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018044] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.018046] Normal [mem 0x0000000100000000-0x000000063effffff] [ 0.018048] Device empty [ 0.018049] Movable zone start for each node [ 0.018052] Early memory node ranges [ 0.018053] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.018055] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] [ 0.018056] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] [ 0.018058] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] [ 0.018059] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] [ 0.018060] node 0: [mem 0x0000000100001000-0x000000063effffff] [ 0.018063] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] [ 0.018071] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018115] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.027971] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.027997] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.028012] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028932] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028999] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029250] ACPI: PM-Timer IO Port: 0x808 [ 0.029261] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029269] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029273] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029275] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029277] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029281] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029283] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029292] CPU topo: Max. logical packages: 1 [ 0.029293] CPU topo: Max. logical dies: 1 [ 0.029294] CPU topo: Max. dies per package: 1 [ 0.029300] CPU topo: Max. threads per core: 1 [ 0.029301] CPU topo: Num. cores per package: 8 [ 0.029302] CPU topo: Num. threads per package: 8 [ 0.029302] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.029321] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.029324] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.029325] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.029326] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.029327] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.029328] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbe4e2fff] [ 0.029330] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] [ 0.029330] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] [ 0.029332] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] [ 0.029334] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.029336] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.029337] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.029338] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.029339] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.029340] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.029341] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.029341] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.029342] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.029343] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.029344] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.029345] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.029346] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.029347] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.029348] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.029349] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.029350] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029352] Booting paravirtualized kernel on bare hardware [ 0.029354] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034926] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.036095] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.036103] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.036107] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.036129] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.036181] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64", will be passed to user space. [ 0.042749] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.046082] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.046175] Fallback order for Node 0: 0 [ 0.046180] Built 1 zonelists, mobility grouping on. Total pages: 6279886 [ 0.046182] Policy zone: Normal [ 0.046193] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.046195] AGP: Checking aperture... [ 0.052501] AGP: No AGP bridge found [ 0.052503] AGP: Node 0: aperture [bus addr 0xb0000000-0xb1ffffff] (32MB) [ 0.052505] Aperture pointing to e820 RAM. Ignoring. [ 0.052506] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052507] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052507] AGP: This costs you 64MB of RAM [ 0.052510] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052513] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] [ 0.052576] software IO TLB: area num 8. [ 0.108546] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108761] ftrace: allocating 45541 entries in 178 pages [ 0.122677] ftrace: allocated 178 pages with 4 groups [ 0.123922] Dynamic Preempt: voluntary [ 0.124170] rcu: Preemptible hierarchical RCU implementation. [ 0.124171] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.124173] Trampoline variant of Tasks RCU enabled. [ 0.124173] Rude variant of Tasks RCU enabled. [ 0.124174] Tracing variant of Tasks RCU enabled. [ 0.124174] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.124175] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.124186] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124189] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124191] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.129568] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129788] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.129889] spurious 8259A interrupt: IRQ7. [ 0.133222] Console: colour VGA+ 80x25 [ 0.133225] printk: legacy console [tty0] enabled [ 0.133497] ACPI: Core revision 20240827 [ 0.133667] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133681] APIC: Switch to symmetric I/O mode setup [ 0.134036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153683] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9613aa320, max_idle_ns: 440795210352 ns [ 0.153690] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.34 BogoMIPS (lpj=12372680) [ 0.153722] LVT offset 1 assigned for vector 0xf9 [ 0.153728] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.153730] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.153735] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153738] Spectre V2 : Mitigation: Retpolines [ 0.153739] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153740] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.153741] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.153743] RETBleed: Mitigation: untrained return thunk [ 0.153745] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153747] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153752] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153753] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153755] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153757] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153759] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.185933] Freeing SMP alternatives memory: 40K [ 0.185940] pid_max: default: 32768 minimum: 301 [ 0.186789] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.187149] landlock: Up and running. [ 0.187151] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.187286] AppArmor: AppArmor initialized [ 0.187324] TOMOYO Linux initialized [ 0.187642] LSM support for eBPF active [ 0.188062] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.188148] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298452] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.298848] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.298876] ... version: 0 [ 0.298877] ... bit width: 48 [ 0.298878] ... generic registers: 6 [ 0.298880] ... value mask: 0000ffffffffffff [ 0.298881] ... max period: 00007fffffffffff [ 0.298882] ... fixed-purpose events: 0 [ 0.298884] ... event mask: 000000000000003f [ 0.299006] signal: max sigframe size: 1776 [ 0.299073] rcu: Hierarchical SRCU implementation. [ 0.299075] rcu: Max phase no-delay instances is 1000. [ 0.299151] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.304039] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.304197] smp: Bringing up secondary CPUs ... [ 0.304393] smpboot: x86: Booting SMP configuration: [ 0.304395] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.333751] smp: Brought up 1 node, 8 CPUs [ 0.333751] smpboot: Total of 8 processors activated (49490.72 BogoMIPS) [ 0.391142] node 0 deferred pages initialised in 52ms [ 0.393703] Memory: 24363348K/25119544K available (16384K kernel code, 2484K rwdata, 11636K rodata, 4220K init, 5000K bss, 748492K reserved, 0K cma-reserved) [ 0.394967] devtmpfs: initialized [ 0.394967] x86/mm: Memory block size: 128MB [ 0.398942] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.398942] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.398942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.398942] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.398942] pinctrl core: initialized pinctrl subsystem [ 0.399772] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.401910] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.402626] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.403372] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.403419] thermal_sys: Registered thermal governor 'fair_share' [ 0.403419] thermal_sys: Registered thermal governor 'bang_bang' [ 0.403419] thermal_sys: Registered thermal governor 'step_wise' [ 0.403419] thermal_sys: Registered thermal governor 'user_space' [ 0.403419] thermal_sys: Registered thermal governor 'power_allocator' [ 0.403419] cpuidle: using governor ladder [ 0.403419] cpuidle: using governor menu [ 0.403419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.403419] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.403419] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.403419] PCI: Using configuration type 1 for base access [ 0.403419] PCI: Using configuration type 1 for extended access [ 0.403419] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.403419] mtrr: probably your BIOS does not setup all CPUs. [ 0.403419] mtrr: corrected configuration. [ 0.403419] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.406727] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406727] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.406727] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406727] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.407734] ACPI: Added _OSI(Module Device) [ 0.407734] ACPI: Added _OSI(Processor Device) [ 0.407734] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.407734] ACPI: Added _OSI(Processor Aggregator Device) [ 0.412904] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.413898] ACPI: Interpreter enabled [ 0.413916] ACPI: PM: (supports S0 S3 S4 S5) [ 0.413918] ACPI: Using IOAPIC for interrupt routing [ 0.414059] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.414097] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.414111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414113] PCI: Using E820 reservations for host bridge windows [ 0.414250] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.420786] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.420793] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.421177] PCI host bridge to bus 0000:00 [ 0.421181] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.421185] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.421187] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.421189] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.421191] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.421193] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.421195] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.421213] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.421349] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.421362] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.421366] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.421369] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.421374] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.421381] pci 0000:00:02.0: enabling Extended Tags [ 0.421406] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.421509] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.421521] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.421525] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.421528] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.421537] pci 0000:00:04.0: enabling Extended Tags [ 0.421561] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.421652] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.421664] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.421669] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.421678] pci 0000:00:05.0: enabling Extended Tags [ 0.421707] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.421801] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.421814] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.421819] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.421828] pci 0000:00:06.0: enabling Extended Tags [ 0.421852] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.421943] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.421956] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.421959] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.421962] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.421971] pci 0000:00:09.0: enabling Extended Tags [ 0.421995] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.422095] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.422107] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.422112] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.422117] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.422123] pci 0000:00:0a.0: enabling Extended Tags [ 0.422147] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.422247] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.422261] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] [ 0.422269] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] [ 0.422277] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] [ 0.422284] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] [ 0.422292] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] [ 0.422299] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] [ 0.422430] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.422443] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] [ 0.422583] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.422597] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] [ 0.422658] pci 0000:00:12.2: supports D1 D2 [ 0.422660] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.422747] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.422761] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] [ 0.422885] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.422899] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] [ 0.422960] pci 0000:00:13.2: supports D1 D2 [ 0.422962] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.423053] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.423183] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.423197] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] [ 0.423205] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] [ 0.423212] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] [ 0.423220] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] [ 0.423227] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] [ 0.423243] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.423245] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.423247] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.423248] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.423341] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.423359] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.423411] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.423496] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.423666] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.423691] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.423697] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.423798] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.423812] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] [ 0.423937] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.423951] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] [ 0.424074] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.424088] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] [ 0.424149] pci 0000:00:16.2: supports D1 D2 [ 0.424151] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.424242] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.424300] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.424353] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.424407] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.424467] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.424528] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.424625] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.424640] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.424650] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.424657] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] [ 0.424664] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] [ 0.424670] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] [ 0.424676] pci 0000:01:00.0: enabling Extended Tags [ 0.424701] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.424750] pci 0000:01:00.0: supports D1 D2 [ 0.424751] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.424834] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.424921] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.424936] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] [ 0.424966] pci 0000:01:00.1: enabling Extended Tags [ 0.425010] pci 0000:01:00.1: supports D1 D2 [ 0.425102] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.425146] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.425158] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] [ 0.425165] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] [ 0.425172] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] [ 0.425178] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] [ 0.425185] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] [ 0.425191] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] [ 0.425198] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] [ 0.425211] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.425236] pci 0000:02:00.0: PME# supported from D3hot [ 0.425314] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.425367] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.425385] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] [ 0.425423] pci 0000:03:00.0: enabling Extended Tags [ 0.425468] pci 0000:03:00.0: supports D1 D2 [ 0.425470] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425567] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.425614] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.425632] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] [ 0.425670] pci 0000:04:00.0: enabling Extended Tags [ 0.425721] pci 0000:04:00.0: supports D1 D2 [ 0.425723] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425822] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.425893] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.425913] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] [ 0.425922] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] [ 0.426023] pci 0000:05:00.0: supports D2 [ 0.426025] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.426130] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.426146] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] [ 0.426155] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] [ 0.426164] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] [ 0.426172] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] [ 0.426181] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] [ 0.426196] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] [ 0.426248] pci 0000:05:00.1: supports D2 [ 0.426250] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.433714] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.433778] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.433800] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] [ 0.433814] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] [ 0.433838] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] [ 0.433921] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.434069] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.434084] pci_bus 0000:07: extended config space not accessible [ 0.434120] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.434139] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] [ 0.434221] pci 0000:07:06.0: supports D1 D2 [ 0.434294] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.434302] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.434304] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.434306] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.434308] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.434311] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.434313] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.434962] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.435025] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.435086] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.435146] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.435196] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.435235] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.435275] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.435314] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.435509] iommu: Default domain type: Translated [ 0.435509] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.435509] pps_core: LinuxPPS API ver. 1 registered [ 0.435509] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.435509] PTP clock support registered [ 0.435509] EDAC MC: Ver: 3.0.0 [ 0.435509] NetLabel: Initializing [ 0.435509] NetLabel: domain hash size = 128 [ 0.435509] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.435509] NetLabel: unlabeled traffic allowed by default [ 0.435509] PCI: Using ACPI for IRQ routing [ 0.442632] PCI: pci_cache_line_size set to 64 bytes [ 0.442694] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.442697] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] [ 0.442699] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] [ 0.442700] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.442702] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.442703] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] [ 0.442726] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.442726] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.442726] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.442726] vgaarb: loaded [ 0.442726] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.442726] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.443849] clocksource: Switched to clocksource tsc-early [ 0.443856] VFS: Disk quotas dquot_6.6.0 [ 0.443856] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.443856] AppArmor: AppArmor Filesystem Enabled [ 0.443856] pnp: PnP ACPI init [ 0.443856] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.443856] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.443856] system 00:03: [io 0x040b] has been reserved [ 0.443856] system 00:03: [io 0x04d6] has been reserved [ 0.443856] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.443856] system 00:03: [io 0x0c14] has been reserved [ 0.443856] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.443856] system 00:03: [io 0x0c52] has been reserved [ 0.443856] system 00:03: [io 0x0c6c] has been reserved [ 0.443856] system 00:03: [io 0x0c6f] has been reserved [ 0.443856] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.443856] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.443856] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.443856] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.443856] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.443856] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.443856] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.443856] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.443856] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.443856] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.443856] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.443856] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.443856] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.443856] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.443856] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.443856] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.443856] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.443856] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.443856] pnp 00:05: [dma 2] [ 0.444002] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.444250] pnp 00:09: [dma 0 disabled] [ 0.444395] pnp: PnP ACPI: found 10 devices [ 0.451658] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.451954] NET: Registered PF_INET protocol family [ 0.452336] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.471589] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.471651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.472015] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.472653] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.472933] TCP: Hash tables configured (established 262144 bind 65536) [ 0.473264] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.473443] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.473582] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.473724] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.473738] NET: Registered PF_XDP protocol family [ 0.473763] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.473767] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.473771] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.473774] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.473779] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.473781] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.473784] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.473789] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.473792] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.473796] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.473799] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.473804] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.473806] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.473809] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.473813] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.473816] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.473819] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.473823] pci 0000:00:14.4: PCI bridge to [bus 07] [ 0.473827] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.473835] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.473838] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.473840] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.473842] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.473843] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.473846] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.473848] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.473850] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.473852] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.473854] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.473856] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.473859] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.473861] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.473863] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.473865] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.473867] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.473869] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.473871] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.473873] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 0.473875] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 0.473877] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 0.473879] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 0.473881] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.473883] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.494558] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 20131 usecs [ 0.510561] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 15445 usecs [ 0.526581] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 15455 usecs [ 0.542555] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 15588 usecs [ 0.542799] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.543149] PCI: CLS 64 bytes, default 64 [ 0.543240] Trying to unpack rootfs image as initramfs... [ 0.543742] PCI-DMA: Disabling AGP. [ 0.543821] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.543823] PCI-DMA: using GART IOMMU. [ 0.543826] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.544695] software IO TLB: tearing down default memory pool [ 0.547405] LVT offset 0 assigned for vector 0x400 [ 0.547567] perf: AMD IBS detected (0x000000ff) [ 0.547970] amd_uncore: 4 amd_nb counters detected [ 0.548738] Initialise system trusted keyrings [ 0.548754] Key type blacklist registered [ 0.548855] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.548874] zbud: loaded [ 0.549295] fuse: init (API version 7.41) [ 0.549676] integrity: Platform Keyring initialized [ 0.549682] integrity: Machine keyring initialized [ 0.573867] Key type asymmetric registered [ 0.573870] Asymmetric key parser 'x509' registered [ 1.571986] tsc: Refined TSC clocksource calibration: 3093.305 MHz [ 1.572013] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9692d4021, max_idle_ns: 440795216934 ns [ 1.575997] clocksource: Switched to clocksource tsc [ 1.613315] Freeing initrd memory: 126156K [ 1.619989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.620054] io scheduler mq-deadline registered [ 1.622241] ledtrig-cpu: registered to indicate activity on CPUs [ 1.623100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.624220] Could not retrieve perf counters (-19) [ 1.624454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.624642] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.625526] Linux agpgart interface v0.103 [ 1.626517] i8042: PNP: No PS/2 controller found. [ 1.626596] mousedev: PS/2 mouse device common for all mice [ 1.626622] rtc_cmos 00:06: RTC can wake from S4 [ 1.626844] rtc_cmos 00:06: registered as rtc0 [ 1.626869] rtc_cmos 00:06: setting system clock to 2025-03-16T11:59:29 UTC (1742126369) [ 1.626898] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.626909] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.627452] NET: Registered PF_INET6 protocol family [ 1.633655] Segment Routing with IPv6 [ 1.633675] In-situ OAM (IOAM) with IPv6 [ 1.633706] mip6: Mobile IPv6 [ 1.633711] NET: Registered PF_PACKET protocol family [ 1.633779] mpls_gso: MPLS GSO support [ 1.633793] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.634300] microcode: Current revision: 0x0600063e [ 1.634302] microcode: Updated early from: 0x06000626 [ 1.634457] IPI shorthand broadcast: enabled [ 1.637062] sched_clock: Marking stable (1632012497, 3878168)->(1655899361, -20008696) [ 1.637339] registered taskstats version 1 [ 1.637515] Loading compiled-in X.509 certificates [ 1.665148] Loaded X.509 cert 'Build time autogenerated kernel key: d2b9f7780b4c1a61ac47e8fa2c108e2eb11543ec' [ 1.667809] Demotion targets for Node 0: null [ 1.668190] Key type .fscrypt registered [ 1.668192] Key type fscrypt-provisioning registered [ 1.691823] Key type encrypted registered [ 1.691829] AppArmor: AppArmor sha256 policy hashing enabled [ 1.691841] ima: No TPM chip found, activating TPM-bypass! [ 1.691844] ima: Allocated hash algorithm: sha256 [ 1.691855] ima: No architecture policies found [ 1.691890] evm: Initialising EVM extended attributes: [ 1.691891] evm: security.selinux [ 1.691893] evm: security.SMACK64 (disabled) [ 1.691894] evm: security.SMACK64EXEC (disabled) [ 1.691895] evm: security.SMACK64TRANSMUTE (disabled) [ 1.691896] evm: security.SMACK64MMAP (disabled) [ 1.691897] evm: security.apparmor [ 1.691898] evm: security.ima [ 1.691899] evm: security.capability [ 1.691901] evm: HMAC attrs: 0x1 [ 1.693560] RAS: Correctable Errors collector initialized. [ 1.711278] clk: Disabling unused clocks [ 1.711282] PM: genpd: Disabling unused power domains [ 1.730087] Freeing unused decrypted memory: 2028K [ 1.731157] Freeing unused kernel image (initmem) memory: 4220K [ 1.731192] Write protecting the kernel read-only data: 28672k [ 1.731702] Freeing unused kernel image (rodata/data gap) memory: 652K [ 1.798635] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.798640] Run /init as init process [ 1.798641] with arguments: [ 1.798643] /init [ 1.798644] with environment: [ 1.798645] HOME=/ [ 1.798646] TERM=linux [ 1.798647] BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 [ 1.938706] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.938785] ACPI: button: Power Button [PWRB] [ 1.938847] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.952211] Floppy drive(s): fd0 is 1.44M [ 1.955276] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.955289] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.956003] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.956054] ACPI: button: Power Button [PWRF] [ 1.956569] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.961786] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.962354] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.962459] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.974030] SCSI subsystem initialized [ 1.985237] FDC 0 is a post-1991 82077 [ 1.989194] ACPI: bus type USB registered [ 1.989235] usbcore: registered new interface driver usbfs [ 1.989261] usbcore: registered new interface driver hub [ 1.989282] usbcore: registered new device driver usb [ 2.019246] ACPI: bus type drm_connector registered [ 2.036497] QUIRK: Enable AMD PLL fix [ 2.036512] libata version 3.00 loaded. [ 2.036531] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.036540] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.036547] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.036556] ehci-pci 0000:00:12.2: debug port 1 [ 2.036613] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.041421] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address XXX [ 2.041428] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.041433] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.041436] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.047926] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.048022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.048029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.048032] usb usb1: Product: EHCI Host Controller [ 2.048034] usb usb1: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.048036] usb usb1: SerialNumber: ... [ 2.048238] hub 1-0:1.0: USB hub found [ 2.048252] hub 1-0:1.0: 5 ports detected [ 2.048474] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.048487] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.048493] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.048502] ehci-pci 0000:00:13.2: debug port 1 [ 2.048530] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.064020] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.064136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.064139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.064142] usb usb2: Product: EHCI Host Controller [ 2.064144] usb usb2: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.064145] usb usb2: SerialNumber: ... [ 2.064301] hub 2-0:1.0: USB hub found [ 2.064313] hub 2-0:1.0: 5 ports detected [ 2.064553] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.064561] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.064566] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.064575] ehci-pci 0000:00:16.2: debug port 1 [ 2.064603] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.075914] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.075977] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.075981] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.075983] usb usb3: Product: EHCI Host Controller [ 2.075985] usb usb3: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.075987] usb usb3: SerialNumber: ... [ 2.076153] hub 3-0:1.0: USB hub found [ 2.076165] hub 3-0:1.0: 4 ports detected [ 2.078002] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.080580] pata_via 0000:05:00.1: version 0.3.4 [ 2.081068] scsi host0: pata_atiixp [ 2.081453] scsi host1: pata_atiixp [ 2.081537] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.081541] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.081927] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.081942] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.081999] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.082022] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.082030] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.082088] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.082990] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.082996] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 2.083001] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.083065] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.083070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.083073] usb usb5: Product: xHCI Host Controller [ 2.083075] usb usb5: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.083078] usb usb5: SerialNumber: ... [ 2.083305] scsi host2: pata_via [ 2.083494] hub 5-0:1.0: USB hub found [ 2.083508] hub 5-0:1.0: 2 ports detected [ 2.083716] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.083786] scsi host3: pata_via [ 2.083898] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 lpm-pol 0 [ 2.083901] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 lpm-pol 0 [ 2.083938] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.083942] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.083945] usb usb6: Product: xHCI Host Controller [ 2.083947] usb usb6: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.083949] usb usb6: SerialNumber: ... [ 2.084144] hub 6-0:1.0: USB hub found [ 2.084157] hub 6-0:1.0: 2 ports detected [ 2.084420] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.084427] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.084483] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.084663] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.084667] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.084672] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.084726] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.084730] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.084733] usb usb7: Product: xHCI Host Controller [ 2.084735] usb usb7: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.084737] usb usb7: SerialNumber: ... [ 2.084893] hub 7-0:1.0: USB hub found [ 2.084905] hub 7-0:1.0: 2 ports detected [ 2.085069] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.085105] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.085108] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.085110] usb usb8: Product: xHCI Host Controller [ 2.085112] usb usb8: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.085113] usb usb8: SerialNumber: ... [ 2.085247] hub 8-0:1.0: USB hub found [ 2.085258] hub 8-0:1.0: 2 ports detected [ 2.103968] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.140028] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.140034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.140036] usb usb4: Product: OHCI PCI host controller [ 2.140038] usb usb4: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.140040] usb usb4: SerialNumber: ... [ 2.140212] hub 4-0:1.0: USB hub found [ 2.140229] hub 4-0:1.0: 5 ports detected [ 2.140629] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.140636] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.140656] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.200110] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.200114] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.200117] usb usb9: Product: OHCI PCI host controller [ 2.200118] usb usb9: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.200120] usb usb9: SerialNumber: ... [ 2.200266] hub 9-0:1.0: USB hub found [ 2.200278] hub 9-0:1.0: 5 ports detected [ 2.200702] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.200709] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.200729] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.259050] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.259065] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.259083] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.259093] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.259097] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.263105] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.263110] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.263112] usb usb10: Product: OHCI PCI host controller [ 2.263114] usb usb10: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.263116] usb usb10: SerialNumber: ... [ 2.263262] hub 10-0:1.0: USB hub found [ 2.263281] hub 10-0:1.0: 2 ports detected [ 2.263588] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.263595] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.263614] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.265008] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.270516] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.315991] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.320128] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.320131] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.320133] usb usb11: Product: OHCI PCI host controller [ 2.320135] usb usb11: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.320136] usb usb11: SerialNumber: ... [ 2.320269] hub 11-0:1.0: USB hub found [ 2.320282] hub 11-0:1.0: 4 ports detected [ 2.328003] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.469924] ahci 0000:00:11.0: version 3.0 [ 2.470151] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.470156] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.470159] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.472050] scsi host4: ahci [ 2.472342] scsi host5: ahci [ 2.472557] scsi host6: ahci [ 2.472780] scsi host7: ahci [ 2.472871] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.472875] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.472879] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.472882] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.473127] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.473132] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.473135] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.473629] scsi host8: ahci [ 2.473837] scsi host9: ahci [ 2.473930] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.473934] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.475993] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.476008] sd 0:0:0:0: [sda] Write Protect is off [ 2.476011] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.476031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.476076] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.476704] usb 3-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.476710] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.476712] usb 3-1: Product: 802.11n NIC [ 2.476714] usb 3-1: Manufacturer: Realtek [ 2.476716] usb 3-1: SerialNumber: ... [ 2.496301] sda: sda1 sda2 sda3 sda4 [ 2.496574] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.544306] usb 8-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.568011] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 2.572834] usb 8-1: New USB device found, idVendor=0bc2, idProduct=50a0, bcdDevice= 1.00 [ 2.572847] usb 8-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.572853] usb 8-1: Product: FA GoFlex Desk [ 2.572858] usb 8-1: Manufacturer: Seagate [ 2.572862] usb 8-1: SerialNumber: ... [ 2.584972] usb-storage 8-1:1.0: USB Mass Storage device detected [ 2.585190] scsi host10: usb-storage 8-1:1.0 [ 2.585311] usbcore: registered new interface driver usb-storage [ 2.628365] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.676895] usb 2-1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 2.676908] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.676914] usb 2-1: SerialNumber: ... [ 2.753141] usb 4-1: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 2.753154] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.753160] usb 4-1: Product: A4Tech Gaming Mouse [ 2.753165] usb 4-1: Manufacturer: PixArt [ 2.771581] hid: raw HID events driver (C) Jiri Kosina [ 2.783448] ata7: SATA link down (SStatus 0 SControl 300) [ 2.783606] ata10: SATA link down (SStatus 0 SControl 330) [ 2.796002] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 2.940069] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.940084] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.940101] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.940131] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.940293] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.940326] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.940334] usb 2-3: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.940340] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.940447] ata6.00: configured for UDMA/133 [ 2.940638] hub 2-3:1.0: USB hub found [ 2.940707] hub 2-3:1.0: 2 ports detected [ 2.941212] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.941508] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.941627] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 2.942024] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.942344] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.942928] ata9.00: configured for UDMA/133 [ 2.943085] ata8.00: configured for UDMA/133 [ 2.945285] ata5.00: configured for UDMA/133 [ 2.945552] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 2.945999] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.946004] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.946022] sd 4:0:0:0: [sdb] Write Protect is off [ 2.946026] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.946052] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.946096] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.946105] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.946620] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.946642] sd 5:0:0:0: [sdc] Write Protect is off [ 2.946646] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.946674] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.946718] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.948098] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.976274] sdc: sdc1 sdc2 [ 2.976416] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.999484] sdb: sdb1 sdb2 sdb3 [ 2.999713] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.014256] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.014667] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.014673] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.014687] sd 8:0:0:0: [sdd] Write Protect is off [ 3.014690] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.014708] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.014743] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.043949] sdd: sdd1 sdd2 [ 3.044209] sd 8:0:0:0: [sdd] Attached SCSI disk [ 3.048053] usbcore: registered new interface driver uas [ 3.056308] usbcore: registered new interface driver usbhid [ 3.056312] usbhid: USB HID core driver [ 3.063178] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:3519.0001/input/input2 [ 3.063326] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-1/input0 [ 3.063712] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:09DA:3519.0002/input/input4 [ 3.116083] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-1/input1 [ 3.131037] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.131043] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.184715] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.238029] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.298126] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.403981] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 3.586123] usb 4-2: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.586130] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.586133] usb 4-2: Product: USB Device [ 3.586135] usb 4-2: Manufacturer: COMPANY [ 3.592452] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:09DA:FAA8.0003/input/input5 [ 3.593468] scsi 10:0:0:0: Direct-Access Seagate FA GoFlex Desk D19 PQ: 0 ANSI: 5 [ 3.594511] sd 10:0:0:0: [sde] 488397167 512-byte logical blocks: (250 GB/233 GiB) [ 3.595334] sd 10:0:0:0: [sde] Write Protect is off [ 3.595337] sd 10:0:0:0: [sde] Mode Sense: 4f 00 00 00 [ 3.596323] sd 10:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.632422] sde: sde1 [ 3.632513] sd 10:0:0:0: [sde] Attached SCSI disk [ 7.300946] [drm] amdgpu kernel modesetting enabled. [ 7.301102] amdgpu: Virtual CRAT table created for CPU [ 7.301127] amdgpu: Topology: Add CPU node [ 7.301453] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.301480] [drm] register mmio base: 0xFEA00000 [ 7.301482] [drm] register mmio size: 262144 [ 7.301564] [drm] add ip block number 0 <vi_common> [ 7.301566] [drm] add ip block number 1 <gmc_v8_0> [ 7.301568] [drm] add ip block number 2 <tonga_ih> [ 7.301569] [drm] add ip block number 3 <gfx_v8_0> [ 7.301571] [drm] add ip block number 4 <sdma_v3_0> [ 7.301572] [drm] add ip block number 5 <powerplay> [ 7.301574] [drm] add ip block number 6 <dm> [ 7.301575] [drm] add ip block number 7 <uvd_v6_0> [ 7.301576] [drm] add ip block number 8 <vce_v3_0> [ 7.302094] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.302099] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.302415] [drm] UVD is enabled in VM mode [ 7.302417] [drm] UVD ENC is enabled in VM mode [ 7.302420] [drm] VCE enabled in VM mode [ 7.302469] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.303547] Console: switching to colour dummy device 80x25 [ 7.303553] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.303556] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.303584] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.303918] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.303924] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.303932] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.303934] [drm] RAM width 256bits GDDR5 [ 7.304055] [drm] amdgpu: 8192M of VRAM memory ready [ 7.304058] [drm] amdgpu: 11997M of GTT memory ready. [ 7.304081] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.304454] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.305532] [drm] Chained IB support enabled! [ 7.310529] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.313416] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.315359] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.356200] hid-generic 0003:09DA:FAA8.0003: input,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input0 [ 7.359573] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:09DA:FAA8.0004/input/input6 [ 7.359812] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-2/input1 [ 7.363742] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:09DA:FAA8.0005/input/input7 [ 7.416004] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:09DA:FAA8.0005/input/input8 [ 7.416261] hid-generic 0003:09DA:FAA8.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-2/input2 [ 7.627484] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 7.687965] usb 4-5: new low-speed USB device number 4 using ohci-pci [ 7.689226] [drm] UVD and UVD ENC initialized successfully. [ 7.799154] [drm] VCE initialized successfully. [ 7.800178] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.800193] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.803951] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.804806] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 7.819434] fbcon: amdgpudrmfb (fb0) is primary device [ 7.897545] Console: switching to colour frame buffer device 160x64 [ 7.915673] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.067895] raid6: sse2x4 gen() 12278 MB/s [ 8.135894] raid6: sse2x2 gen() 11414 MB/s [ 8.203897] raid6: sse2x1 gen() 7804 MB/s [ 8.203898] raid6: using algorithm sse2x4 gen() 12278 MB/s [ 8.271896] raid6: .... xor() 4490 MB/s, rmw enabled [ 8.271898] raid6: using ssse3x2 recovery algorithm [ 8.273706] xor: automatically using best checksumming function avx [ 8.275146] async_tx: api initialized (async) [ 8.626026] Btrfs loaded, zoned=yes, fsverity=yes [ 9.246354] usb 4-5: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 9.246359] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.246362] usb 4-5: Product: NOVA AVR [ 9.246363] usb 4-5: Manufacturer: MGE UPS SYSTEMS [ 11.779391] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:12.0-5/input0 [ 21.440963] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 21.441009] floppy: error 10 while reading block 0 [ 21.810023] EXT4-fs (sda4): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 21.908830] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.032124] systemd[1]: RTC configured in localtime, applying delta of 300 minutes to system time. [ 22.059823] systemd[1]: Inserted module 'autofs4' [ 22.087262] systemd[1]: systemd 255.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 22.087276] systemd[1]: Detected architecture x86-64. [ 22.088970] systemd[1]: Hostname set to ... [ 22.470428] systemd[1]: Queued start job for default target graphical.target. [ 22.497459] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 22.497899] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 22.498295] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver. [ 22.498732] systemd[1]: Created slice system-tor.slice - Slice /system/tor. [ 22.499072] systemd[1]: Created slice user.slice - User and Session Slice. [ 22.499160] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 22.499379] systemd[1]: Set up automount ... [ 22.499409] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 22.499449] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 22.499466] systemd[1]: Reached target slices.target - Slice Units. [ 22.499490] systemd[1]: Reached target swap.target - Swaps. [ 22.499518] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 22.499670] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 22.499737] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 22.499867] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 22.500118] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 22.500158] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 22.500582] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 22.500708] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 22.502098] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 22.502970] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 22.503934] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 22.504801] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 22.506727] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 22.508115] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 22.509457] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 22.510895] systemd[1]: Starting XXX@XXX - Load Kernel Module dm_mod... [ 22.513348] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 22.514995] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 22.518039] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 22.524041] systemd[1]: Starting XXX@XXX - Load Kernel Module loop... [ 22.524347] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 22.526978] systemd[1]: Starting systemd-journald.service - Journal Service... [ 22.530832] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 22.530859] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 22.532202] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 22.532321] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 22.533778] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 22.536335] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 22.536502] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 22.536644] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 22.536779] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 22.537080] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 22.537680] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.537895] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs. [ 22.538361] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.538600] systemd[1]: Finished XXX@XXX - Load Kernel Module drm. [ 22.539047] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.539277] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse. [ 22.542947] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 22.544294] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 22.548310] loop: module loaded [ 22.552151] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 22.552760] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.553049] systemd[1]: Finished XXX@XXX - Load Kernel Module efi_pstore. [ 22.553460] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.553660] systemd[1]: Finished XXX@XXX - Load Kernel Module loop. [ 22.557371] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 22.560317] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 22.568534] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 22.568580] device-mapper: uevent: version 1.0.3 [ 22.568704] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 22.569735] systemd[1]: XXX@XXX: Deactivated successfully. [ 22.569981] systemd[1]: Finished XXX@XXX - Load Kernel Module dm_mod. [ 22.570286] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 22.570712] systemd-journald[459]: Collecting audit messages is disabled. [ 22.583031] EXT4-fs (sda4): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. Quota mode: none. [ 22.584532] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 22.586197] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 22.586257] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 22.587525] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 22.587553] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 22.598400] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 22.598617] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 22.600184] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 22.607571] lp: driver loaded but no devices found [ 22.614708] ppdev: user-space parallel port driver [ 22.624440] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 22.626208] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 22.649811] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 22.651294] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 22.653225] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 22.653343] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 22.653372] systemd[1]: Reached target local-fs.target - Local File Systems. [ 22.655369] systemd[1]: Listening on systemd-sysext.socket - System Extension Image Management (Varlink). [ 22.656938] systemd[1]: Starting apparmor.service - Load AppArmor profiles... [ 22.658187] systemd[1]: Starting console-setup.service - Set console font and keymap... [ 22.658269] systemd[1]: ldconfig.service - Rebuild Dynamic Linker Cache was skipped because no trigger condition checks were met. [ 22.659488] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... [ 22.663173] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... [ 22.681196] systemd[1]: Finished console-setup.service - Set console font and keymap. [ 22.683738] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 488 (systemd-binfmt) [ 22.685283] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System... [ 22.685643] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 22.691841] systemd[1]: Received SIGRTMIN+20 from PID 379 (plymouthd). [ 22.693075] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. [ 22.704453] systemd[1]: Started systemd-journald.service - Journal Service. [ 22.730002] systemd-journald[459]: Received client request to flush runtime journal. [ 22.800026] systemd-journald[459]: /var/log/journal/f15179d86e23444a937404d12eeb5157/system.journal: Journal file uses a different sequence number ID, rotating. [ 22.800037] systemd-journald[459]: Rotating system journal. [ 22.855899] random: crng init done [ 23.100723] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.126372] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 23.138498] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 23.149011] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 23.193363] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 23.205920] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 23.206708] sd 10:0:0:0: Attached scsi generic sg6 type 0 [ 23.209231] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 23.209377] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 23.209566] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 23.212286] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 23.224934] mc: Linux media interface: v0.10 [ 23.275707] acpi_cpufreq: overriding BIOS provided _PSD data [ 23.354507] at24 0-0050: supply vcc not found, using dummy regulator [ 23.356311] at24 0-0050: 256 byte spd EEPROM, read-only [ 23.356350] at24 0-0051: supply vcc not found, using dummy regulator [ 23.358128] at24 0-0051: 256 byte spd EEPROM, read-only [ 23.358167] at24 0-0052: supply vcc not found, using dummy regulator [ 23.359930] at24 0-0052: 256 byte spd EEPROM, read-only [ 23.360395] at24 0-0053: supply vcc not found, using dummy regulator [ 23.362162] at24 0-0053: 256 byte spd EEPROM, read-only [ 23.626008] cryptd: max_cpu_qlen set to 1000 [ 23.671244] videodev: Linux video capture interface: v2.00 [ 23.678358] AES CTR mode by8 optimization enabled [ 23.730821] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 23.753931] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 23.754115] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 23.754122] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] [ 23.754144] saa7134: saa7133[0]: board init: gpio is 40000 [ 23.766807] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 23.791550] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 23.850773] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 23.851040] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 23.851214] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 23.851363] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 23.852079] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 23.863927] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.864297] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 23.864671] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 23.864987] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.865354] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 23.871900] Registered IR keymap rc-avermedia-m135a [ 23.879679] IR NEC protocol handler initialized [ 23.893452] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 23.893461] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.893465] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.893468] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.893471] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 23.893473] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.893476] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 23.893479] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 23.893481] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 23.908012] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 23.908076] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 23.908124] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 23.914132] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 23.914227] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 23.918144] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 23.918254] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 23.918353] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 23.920224] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 23.920385] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 23.920534] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 24.059898] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 24.059906] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 24.059908] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 24.059911] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059913] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 24.059914] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059916] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059919] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059921] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059923] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059925] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059927] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059929] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059931] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059932] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.059934] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 24.155929] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 24.158289] kvm_amd: TSC scaling supported [ 24.158293] kvm_amd: Nested Virtualization enabled [ 24.158295] kvm_amd: Nested Paging enabled [ 24.158296] kvm_amd: LBR virtualization supported [ 24.177127] MCE: In-kernel MCE decoding enabled. [ 24.244000] tda829x 13-004b: setting tuner address to 60 [ 24.310392] usb 3-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 24.310406] usb 3-1: RTL8188EU MAC: XXX [ 24.310412] usb 3-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 24.311942] usb 3-1: Firmware revision 28.0 (signature 0x88e1) [ 24.324004] tda829x 13-004b: type set to tda8290+75a [ 24.878531] usbcore: registered new interface driver rtl8xxxu [ 24.887046] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 [ 25.095546] usb 2-1: set resolution quirk: cval->res = 384 [ 25.096823] usbcore: registered new interface driver snd-usb-audio [ 25.096905] usb 2-1: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.290012] usbcore: registered new interface driver uvcvideo [ 28.048715] saa7134: saa7133[0]: registered device video2 [v4l2] [ 28.048892] saa7134: saa7133[0]: registered device vbi0 [ 28.049012] saa7134: saa7133[0]: registered device radio0 [ 28.065634] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 28.065679] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 32.318705] Process accounting resumed [ 32.521191] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 32.987935] NET: Registered PF_QIPCRTR protocol family [ 33.796024] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 34.812789] wlxd037459855f3: No basic rates, using min rate instead [ 34.818017] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 34.818023] wlxd037459855f3: send auth to XXX (try 1/3) [ 34.819399] wlxd037459855f3: authenticated [ 34.819914] wlxd037459855f3: associate with XXX (try 1/3) [ 34.822120] wlxd037459855f3: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [ 34.822127] wlxd037459855f3: No basic rates, using min rate instead [ 34.823886] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 34.826139] wlxd037459855f3: associated [ 36.729863] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 36.729871] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 36.729874] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 48.789488] systemd-journald[459]: Time jumped backwards, rotating. [ 99.454519] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 99.498861] JFS: nTxBlock = 8192, nTxLock = 65536 [ 99.635345] QNX4 filesystem 0.2.3 registered. [ 330.274527] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 330.274546] floppy: error 10 while reading block 0 [ 332.460178] Process accounting resumed [ 632.371767] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 632.371785] floppy: error 10 while reading block 0 [ 771.246641] Non-volatile memory driver v1.3 [ 776.540633] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 783.626079] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 783.626101] floppy: error 10 while reading block 0 [ 797.550377] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 797.550395] floppy: error 10 while reading block 0