Probe #b8b332e92f of eMachines E725
Log: dmesg
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 4.18.16-desktop-1bP (XXX@XXX) (gcc version 8.2.1 20180824 (blackPanther 8.2.1-0.20180824.1bP)) #1 SMP Tue Oct 23 22:47:49 CEST 2018
[ 0.000000] Command line: automatic=method:cdrom initrd=/boot/cdrom/initrd_old.gz root=blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD splash quiet noiswmd audit=0 rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=791 xdriver=free
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b96bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b96c000-0x000000007b9befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b9bf000-0x000000007ba81fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ba82000-0x000000007babefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007babf000-0x000000007baebfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007baec000-0x000000007bafefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007baff000-0x000000007bafffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bb00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: eMachines eMachines E725 /eMachines E725 , BIOS V3.06 01/22/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 1 base 0FFFC0000 mask FFFFE0000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 040000000 mask FC0000000 write-back
[ 0.000000] 4 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 5 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 6 base 07BB00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.000000] BRK [0x318e2000, 0x318e2fff] PGTABLE
[ 0.000000] BRK [0x318e3000, 0x318e3fff] PGTABLE
[ 0.000000] BRK [0x318e4000, 0x318e4fff] PGTABLE
[ 0.000000] BRK [0x318e5000, 0x318e5fff] PGTABLE
[ 0.000000] BRK [0x318e6000, 0x318e6fff] PGTABLE
[ 0.000000] BRK [0x318e7000, 0x318e7fff] PGTABLE
[ 0.000000] BRK [0x318e8000, 0x318e8fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x79a52000-0x7b96bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000007BAFE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000007BAFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 0x000000007BAEE000 00984B (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 0x000000007BA8F000 000040
[ 0.000000] ACPI: FACS 0x000000007BA8F000 000040
[ 0.000000] ACPI: HPET 0x000000007BAFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 0x000000007BAFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 0x000000007BAFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 0x000000007BAF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 0x000000007BAF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 0x000000007BAED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 0x000000007BAEC000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bafffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7bae8000-0x7baebfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007bafffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007b96bfff]
[ 0.000000] node 0: [mem 0x000000007b9bf000-0x000000007ba81fff]
[ 0.000000] node 0: [mem 0x000000007babf000-0x000000007baebfff]
[ 0.000000] node 0: [mem 0x000000007baff000-0x000000007bafffff]
[ 0.000000] Reserved but unavailable: 17926 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bafffff]
[ 0.000000] On node 0 totalpages: 506362
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7852 pages used for memmap
[ 0.000000] DMA32 zone: 502365 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b96c000-0x7b9befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ba82000-0x7babefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7baec000-0x7bafefff]
[ 0.000000] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x51a with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s145816 r8192 d30312 u524288
[ 0.000000] pcpu-alloc: s145816 r8192 d30312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 498425
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: automatic=method:cdrom initrd=/boot/cdrom/initrd_old.gz root=blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD splash quiet noiswmd audit=0 rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=791 xdriver=free
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1934432K/2025448K available (12300K kernel code, 1346K rwdata, 3672K rodata, 1568K init, 656K bss, 91016K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 34488 entries in 135 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005000] tsc: Fast TSC calibration using PIT
[ 0.006000] tsc: Detected 2194.408 MHz processor
[ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa190326f8, max_idle_ns: 440795261654 ns
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.81 BogoMIPS (lpj=2194408)
[ 0.006000] pid_max: default: 32768 minimum: 301
[ 0.006000] Security Framework initialized
[ 0.006000] TOMOYO Linux initialized
[ 0.007258] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007857] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007892] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.007913] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.008244] mce: CPU supports 6 MCE banks
[ 0.008253] CPU0: Thermal monitoring enabled (TM1)
[ 0.008256] process: using mwait in idle threads
[ 0.008261] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.008262] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.008265] Spectre V2 : Mitigation: Full generic retpoline
[ 0.008266] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.008267] Speculative Store Bypass: Vulnerable
[ 0.008426] Freeing SMP alternatives memory: 32K
[ 0.011000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.011000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.011000] ... version: 2
[ 0.011000] ... bit width: 40
[ 0.011000] ... generic registers: 2
[ 0.011000] ... value mask: 000000ffffffffff
[ 0.011000] ... max period: 000000007fffffff
[ 0.011000] ... fixed-purpose events: 3
[ 0.011000] ... event mask: 0000000700000003
[ 0.011000] Hierarchical SRCU implementation.
[ 0.011106] smp: Bringing up secondary CPUs ...
[ 0.011271] x86: Booting SMP configuration:
[ 0.011273] .... node #0, CPUs: #1
[ 0.013042] smp: Brought up 1 node, 2 CPUs
[ 0.013042] smpboot: Max logical packages: 2
[ 0.013042] smpboot: Total of 2 processors activated (8777.63 BogoMIPS)
[ 0.014219] devtmpfs: initialized
[ 0.014219] x86/mm: Memory block size: 128MB
[ 0.015006] PM: Registering ACPI NVS region [mem 0x7ba82000-0x7babefff] (249856 bytes)
[ 0.015024] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.015024] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.015096] xor: measuring software checksum speed
[ 0.025002] prefetch64-sse: 12504.000 MB/sec
[ 0.035002] generic_sse: 10600.000 MB/sec
[ 0.035003] xor: using function: prefetch64-sse (12504.000 MB/sec)
[ 0.035006] pinctrl core: initialized pinctrl subsystem
[ 0.035145] RTC time: 21:18:38, date: 06/30/22
[ 0.035322] NET: Registered protocol family 16
[ 0.035630] cpuidle: using governor ladder
[ 0.035630] cpuidle: using governor menu
[ 0.035630] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.035630] Simple Boot Flag at 0x44 set to 0x1
[ 0.035630] ACPI: bus type PCI registered
[ 0.035630] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.035630] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.035630] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.035630] PCI: Using configuration type 1 for base access
[ 0.037361] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.054016] raid6: sse2x1 gen() 3300 MB/s
[ 0.071007] raid6: sse2x1 xor() 3777 MB/s
[ 0.088016] raid6: sse2x2 gen() 3789 MB/s
[ 0.105007] raid6: sse2x2 xor() 4679 MB/s
[ 0.122007] raid6: sse2x4 gen() 6820 MB/s
[ 0.139005] raid6: sse2x4 xor() 4324 MB/s
[ 0.139007] raid6: using algorithm sse2x4 gen() 6820 MB/s
[ 0.139008] raid6: .... xor() 4324 MB/s, rmw enabled
[ 0.139009] raid6: using ssse3x2 recovery algorithm
[ 0.139123] ACPI: Added _OSI(Module Device)
[ 0.139124] ACPI: Added _OSI(Processor Device)
[ 0.139125] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.139126] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.139128] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.144972] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.147873] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.148242] ACPI: Dynamic OEM Table Load:
[ 0.148249] ACPI: SSDT 0xFFFF95B776A01000 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.148570] ACPI: Dynamic OEM Table Load:
[ 0.148576] ACPI: SSDT 0xFFFF95B776A44000 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.149126] ACPI: Dynamic OEM Table Load:
[ 0.149131] ACPI: SSDT 0xFFFF95B776A34A00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.149390] ACPI: Dynamic OEM Table Load:
[ 0.149395] ACPI: SSDT 0xFFFF95B776A25480 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.149848] ACPI: EC: EC started
[ 0.149849] ACPI: EC: interrupt blocked
[ 0.154069] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[ 0.154072] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.154074] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[ 0.154075] ACPI: Interpreter enabled
[ 0.154104] ACPI: (supports S0 S3 S4 S5)
[ 0.154106] ACPI: Using IOAPIC for interrupt routing
[ 0.154140] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.154383] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.161706] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.161714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.161720] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.161734] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.162164] PCI host bridge to bus 0000:00
[ 0.162167] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.162169] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.162171] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.162174] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.162176] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.162187] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.162220] DMAR: Forcing write-buffer flush capability
[ 0.162221] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.162322] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.162336] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
[ 0.162344] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.162350] pci 0000:00:02.0: reg 0x20: [io 0x50f0-0x50f7]
[ 0.162467] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.162479] pci 0000:00:02.1: reg 0x10: [mem 0x93400000-0x934fffff 64bit]
[ 0.162636] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.162720] pci 0000:00:1a.0: reg 0x20: [io 0x50c0-0x50df]
[ 0.162900] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.164396] pci 0000:00:1a.7: reg 0x10: [mem 0x96704c00-0x96704fff]
[ 0.169057] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.169178] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.169207] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit]
[ 0.169310] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.169414] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.169520] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.169638] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.169744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.169867] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.170077] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.170203] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.170282] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf]
[ 0.170454] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.170535] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f]
[ 0.170697] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.170777] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f]
[ 0.170938] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.171024] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f]
[ 0.171192] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.172812] pci 0000:00:1d.7: reg 0x10: [mem 0x96704800-0x96704bff]
[ 0.177457] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.177567] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.178021] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.178255] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.178281] pci 0000:00:1f.2: reg 0x10: [io 0x50e8-0x50ef]
[ 0.178291] pci 0000:00:1f.2: reg 0x14: [io 0x50fc-0x50ff]
[ 0.178301] pci 0000:00:1f.2: reg 0x18: [io 0x50e0-0x50e7]
[ 0.178310] pci 0000:00:1f.2: reg 0x1c: [io 0x50f8-0x50fb]
[ 0.178320] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 0.178330] pci 0000:00:1f.2: reg 0x24: [mem 0x96704000-0x967047ff]
[ 0.178387] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178488] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.178513] pci 0000:00:1f.3: reg 0x10: [mem 0x96705000-0x967050ff 64bit]
[ 0.178539] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.178735] acpiphp: Slot [1] registered
[ 0.178741] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.178746] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.178750] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
[ 0.178757] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.179050] pci 0000:04:00.0: [14e4:4315] type 00 class 0x028000
[ 0.179160] pci 0000:04:00.0: reg 0x10: [mem 0x94600000-0x94603fff 64bit]
[ 0.179342] pci 0000:04:00.0: enabling Extended Tags
[ 0.179567] pci 0000:04:00.0: supports D1 D2
[ 0.179981] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.179986] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.179990] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
[ 0.180003] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.180075] pci 0000:05:00.0: [1969:1062] type 00 class 0x020000
[ 0.180119] pci 0000:05:00.0: reg 0x10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.180135] pci 0000:05:00.0: reg 0x18: [io 0x1000-0x107f]
[ 0.180286] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180412] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.180416] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.180420] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff]
[ 0.180427] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref]
[ 0.180452] pci_bus 0000:06: extended config space not accessible
[ 0.180520] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.180532] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.180534] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.180536] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.180538] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.288234] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.288309] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.288379] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.288450] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.288525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.288596] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.288668] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.288738] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.289466] ACPI: EC: interrupt unblocked
[ 0.289490] ACPI: EC: event unblocked
[ 0.289499] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.289501] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.289607] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.289607] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.289607] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.289607] vgaarb: loaded
[ 0.289607] SCSI subsystem initialized
[ 0.290011] libata version 3.00 loaded.
[ 0.290094] EDAC MC: Ver: 3.0.0
[ 0.290331] PCI: Using ACPI for IRQ routing
[ 0.292737] PCI: pci_cache_line_size set to 64 bytes
[ 0.293021] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.293023] e820: reserve RAM buffer [mem 0x7b96c000-0x7bffffff]
[ 0.293024] e820: reserve RAM buffer [mem 0x7ba82000-0x7bffffff]
[ 0.293025] e820: reserve RAM buffer [mem 0x7baec000-0x7bffffff]
[ 0.293027] e820: reserve RAM buffer [mem 0x7bb00000-0x7bffffff]
[ 0.293175] NetLabel: Initializing
[ 0.293176] NetLabel: domain hash size = 128
[ 0.293176] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.293199] NetLabel: unlabeled traffic allowed by default
[ 0.294103] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.294115] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.294122] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.296035] clocksource: Switched to clocksource tsc-early
[ 0.318070] VFS: Disk quotas dquot_6.6.0
[ 0.318095] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.318243] pnp: PnP ACPI init
[ 0.423996] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.424067] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.424069] system 00:00: [io 0x0610] has been reserved
[ 0.424071] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.424073] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.424076] system 00:00: [io 0x0820-0x0823] has been reserved
[ 0.424078] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.424080] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.424083] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.424086] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.424093] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.424096] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.424098] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.424100] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.424103] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.424105] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.424107] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.424115] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.424183] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.424267] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.424338] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.424525] pnp: PnP ACPI: found 4 devices
[ 0.430824] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.430874] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.430878] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.430884] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
[ 0.430888] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.430896] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.430899] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.430904] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
[ 0.430908] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.430916] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.430919] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.430924] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff]
[ 0.430929] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref]
[ 0.430936] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.430951] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430953] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.430955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430957] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.430959] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.430961] pci_bus 0000:02: resource 1 [mem 0x95700000-0x966fffff]
[ 0.430963] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.430965] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.430966] pci_bus 0000:04: resource 1 [mem 0x94600000-0x956fffff]
[ 0.430968] pci_bus 0000:04: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.430970] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 0.430972] pci_bus 0000:05: resource 1 [mem 0x93500000-0x945fffff]
[ 0.430974] pci_bus 0000:05: resource 2 [mem 0x92400000-0x933fffff 64bit pref]
[ 0.430976] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430978] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.430980] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430982] pci_bus 0000:06: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.431133] NET: Registered protocol family 2
[ 0.431343] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.431361] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.431431] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.431538] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.431607] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.431625] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.431699] NET: Registered protocol family 1
[ 0.431708] NET: Registered protocol family 44
[ 0.431727] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.444949] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6c3 took 12469 usecs
[ 0.457940] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c3 took 11518 usecs
[ 0.458156] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.458161] PCI: CLS 64 bytes, default 64
[ 0.458228] Trying to unpack rootfs image as initramfs...
[ 6.750193] Freeing initrd memory: 31848K
[ 6.751137] Initialise system trusted keyrings
[ 6.751226] workingset: timestamp_bits=56 max_order=19 bucket_order=0
[ 6.753768] zbud: loaded
[ 6.754781] pstore: using deflate compression
[ 6.755876] Key type asymmetric registered
[ 6.755878] Asymmetric key parser 'x509' registered
[ 6.755937] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 6.755977] io scheduler noop registered
[ 6.755978] io scheduler deadline registered
[ 6.756047] io scheduler cfq registered (default)
[ 6.756049] io scheduler mq-deadline registered
[ 6.756050] io scheduler kyber registered
[ 6.756102] io scheduler bfq registered
[ 6.756386] pcieport 0000:00:1c.0: enabling device (0001 -> 0003)
[ 6.757185] vesafb: mode is 1024x768x16, linelength=2048, pages=41
[ 6.757186] vesafb: scrolling: redraw
[ 6.757188] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 6.757215] vesafb: framebuffer at 0x80000000, mapped to 0x(____ptrval____), using 3072k, total 65472k
[ 6.769390] Console: switching to colour frame buffer device 128x48
[ 6.781392] fb0: VESA VGA frame buffer device
[ 6.781417] intel_idle: does not run on family 6 model 23
[ 6.781547] Monitor-Mwait will be used to enter C-1 state
[ 6.781553] Monitor-Mwait will be used to enter C-2 state
[ 6.781556] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.781618] clocksource: Switched to clocksource hpet
[ 6.782087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.782629] Linux agpgart interface v0.103
[ 6.785587] brd: module loaded
[ 6.786125] ahci 0000:00:1f.2: version 3.0
[ 6.786449] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 6.786479] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 6.786483] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 6.789547] scsi host0: ahci
[ 6.789755] scsi host1: ahci
[ 6.789890] scsi host2: ahci
[ 6.790031] scsi host3: ahci
[ 6.790078] ata1: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704100 irq 24
[ 6.790081] ata2: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704180 irq 24
[ 6.790082] ata3: DUMMY
[ 6.790083] ata4: DUMMY
[ 6.790234] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 6.817281] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.817288] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.817478] mousedev: PS/2 mouse device common for all mice
[ 6.817906] rtc_cmos 00:01: RTC can wake from S4
[ 6.818105] rtc_cmos 00:01: registered as rtc0
[ 6.818123] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 6.818169] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.818412] Key type dns_resolver registered
[ 6.818414] mpls_gso: MPLS GSO support
[ 6.818619] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 6.818679] microcode: Microcode Update Driver: v2.2.
[ 6.818852] registered taskstats version 1
[ 6.818853] Loading compiled-in X.509 certificates
[ 6.818904] zswap: loaded using pool lzo/zbud
[ 6.819572] Btrfs loaded, crc32c=crc32c-generic
[ 6.822183] Key type encrypted registered
[ 6.822689] Magic number: 10:754:349
[ 6.822839] rtc_cmos 00:01: setting system clock to 2022-06-30 21:18:45 UTC (1656623925)
[ 6.822909] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 6.823032] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 6.846512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 7.364058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.370647] ata1.00: ATA-8: WDC WD5000BEVT-22A0RT0, 01.01A01, max UDMA/133
[ 7.370649] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 7.372583] ata1.00: configured for UDMA/133
[ 7.372822] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 1A01 PQ: 0 ANSI: 5
[ 7.373171] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.373186] sd 0:0:0:0: [sda] Write Protect is off
[ 7.373189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.373212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.437300] sda: sda1 sda2
[ 7.437668] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.841076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.843058] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, 1.01, max UDMA/100
[ 7.846654] ata2.00: configured for UDMA/100
[ 7.851753] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N 1.01 PQ: 0 ANSI: 5
[ 7.852375] random: fast init done
[ 7.871434] Freeing unused kernel image memory: 1568K
[ 7.877054] Write protecting the kernel read-only data: 18432k
[ 7.878516] Freeing unused kernel image memory: 2016K
[ 7.878876] Freeing unused kernel image memory: 424K
[ 7.979699] dracut: dracut-046
[ 8.035178] loop: module loaded
[ 8.038740] dracut: root was blackPanther:LABEL=blackPantherOS-18.1-KDE-LiveCD, is now blackPanther:/dev/disk/by-label/blackPantherOS-18.1-KDE-LiveCD
[ 8.195806] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input2
[ 8.195821] ACPI: Power Button [PWRB]
[ 8.196259] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input3
[ 8.196269] ACPI: Lid Switch [LID0]
[ 8.196573] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input4
[ 8.196585] ACPI: Sleep Button [SLPB]
[ 8.196707] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.196734] ACPI: Power Button [PWRF]
[ 8.202767] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found
[ 8.363684] pci 0000:00:00.0: Intel GM45 Chipset
[ 8.363705] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.363994] pci 0000:00:00.0: detected 65536K stolen memory
[ 8.364052] checking generic (80000000 3ff0000) vs hw (80000000 10000000)
[ 8.364054] fb: switching to inteldrmfb from VESA VGA
[ 8.364092] Console: switching to colour dummy device 80x25
[ 8.364241] [drm] Replacing VGA console driver
[ 8.364836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.364838] [drm] Driver supports precise vblank timestamp query.
[ 8.365506] [drm] applying inverted panel brightness quirk
[ 8.365562] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.386384] [drm] RC6 disabled, disabling runtime PM support
[ 8.387170] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 8.387893] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 8.704090] acpi device:06: registered as cooling_device2
[ 8.704432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 8.715749] fbcon: inteldrmfb (fb0) is primary device
[ 9.397503] Console: switching to colour frame buffer device 170x48
[ 9.416195] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.432539] dracut: Starting plymouth daemon
[ 9.695868] ACPI: bus type USB registered
[ 9.695898] usbcore: registered new interface driver usbfs
[ 9.695911] usbcore: registered new interface driver hub
[ 9.701112] usbcore: registered new device driver usb
[ 9.720974] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.720977] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.721211] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.732395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.733936] ehci-pci: EHCI PCI platform driver
[ 9.736285] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 9.736296] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 9.736315] ehci-pci 0000:00:1a.7: debug port 1
[ 9.740238] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 9.745798] ehci-pci 0000:00:1a.7: irq 21, io mem 0x96704c00
[ 9.752035] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 9.752131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 9.752133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.752135] usb usb1: Product: EHCI Host Controller
[ 9.752137] usb usb1: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd
[ 9.752138] usb usb1: SerialNumber: ...
[ 9.752338] hub 1-0:1.0: USB hub found
[ 9.752347] hub 1-0:1.0: 2 ports detected
[ 9.752789] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 9.752797] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 9.752814] ehci-pci 0000:00:1d.7: debug port 1
[ 9.756741] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 9.756764] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96704800
[ 9.763343] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 9.763421] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 9.763423] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.763425] usb usb2: Product: EHCI Host Controller
[ 9.763427] usb usb2: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd
[ 9.763428] usb usb2: SerialNumber: ...
[ 9.763603] hub 2-0:1.0: USB hub found
[ 9.763612] hub 2-0:1.0: 8 ports detected
[ 9.770085] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.770436] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 9.770444] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 9.770455] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 9.770493] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0
[ 9.771685] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 9.771687] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.771689] usb usb3: Product: UHCI Host Controller
[ 9.771691] usb usb3: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd
[ 9.771693] usb usb3: SerialNumber: ...
[ 9.772530] hub 3-0:1.0: USB hub found
[ 9.772540] hub 3-0:1.0: 2 ports detected
[ 9.772957] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.772966] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 9.772975] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 9.773025] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[ 9.773107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 9.773109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.773111] usb usb4: Product: UHCI Host Controller
[ 9.773113] usb usb4: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd
[ 9.773115] usb usb4: SerialNumber: ...
[ 9.773967] hub 4-0:1.0: USB hub found
[ 9.773977] hub 4-0:1.0: 2 ports detected
[ 9.775240] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.775261] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 9.775274] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 9.775664] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 9.775751] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 9.775753] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.775755] usb usb5: Product: UHCI Host Controller
[ 9.775757] usb usb5: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd
[ 9.775758] usb usb5: SerialNumber: ...
[ 9.777149] hub 5-0:1.0: USB hub found
[ 9.777161] hub 5-0:1.0: 2 ports detected
[ 9.777619] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.777631] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 9.777643] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 9.777682] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060
[ 9.778153] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 9.778156] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.778158] usb usb6: Product: UHCI Host Controller
[ 9.778160] usb usb6: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd
[ 9.778161] usb usb6: SerialNumber: ...
[ 9.778679] hub 6-0:1.0: USB hub found
[ 9.778689] hub 6-0:1.0: 2 ports detected
[ 9.780141] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 9.780155] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 9.780168] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 9.780222] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[ 9.780604] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 9.780607] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 9.780609] usb usb7: Product: UHCI Host Controller
[ 9.780610] usb usb7: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd
[ 9.780612] usb usb7: SerialNumber: ...
[ 9.781155] hub 7-0:1.0: USB hub found
[ 9.781167] hub 7-0:1.0: 2 ports detected
[ 10.083026] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.218091] usb 2-1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
[ 10.218094] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 10.218096] usb 2-1: Product: DataTraveler 2.0
[ 10.218097] usb 2-1: Manufacturer: Kingston
[ 10.218099] usb 2-1: SerialNumber: ...
[ 10.226047] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 10.226821] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 10.226998] scsi host4: usb-storage 2-1:1.0
[ 10.227133] usbcore: registered new interface driver usb-storage
[ 10.229330] usbcore: registered new interface driver uas
[ 10.334052] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 10.399079] usb 3-1: New USB device found, idVendor=09da, idProduct=c10a, bcdDevice=10.32
[ 10.399081] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 10.399083] usb 3-1: Product: USB Mouse
[ 10.399085] usb 3-1: Manufacturer: A4Tech
[ 10.411804] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.432440] usbcore: registered new interface driver usbhid
[ 10.432443] usbhid: USB HID core driver
[ 10.434342] input: A4Tech USB Mouse Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:09DA:C10A.0001/input/input7
[ 10.434453] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:09DA:C10A.0001/input/input8
[ 10.434585] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1a.0-1/input0
[ 10.503835] usb 2-4: New USB device found, idVendor=064e, idProduct=a103, bcdDevice= 5.00
[ 10.503839] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=...
[ 10.503841] usb 2-4: Product: Video WebCam
[ 10.503843] usb 2-4: Manufacturer: SuYin
[ 10.503845] usb 2-4: SerialNumber: ...
[ 11.233492] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 11.235982] sd 4:0:0:0: [sdb] 31252480 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 11.236720] sd 4:0:0:0: [sdb] Write Protect is off
[ 11.236723] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 11.237357] sd 4:0:0:0: [sdb] No Caching mode page found
[ 11.237412] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.242218] sdb: sdb1 sdb2
[ 11.245226] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 12.206967] random: crng init done
[ 12.767107] dracut: ==> Basedev: /dev/sdb
[ 12.767202] dracut:
[ 12.767305] dracut: ==> blackPanther OS basedev is: /dev/sdb
[ 12.767400] dracut: ==> blackPanther OS livedev is: /dev/sdb2
[ 12.767492] dracut: ==> blackPanther OS basedir is: /
[ 12.767585] dracut: ==> blackPanther OS overlay is:
[ 12.767665] dracut:
[ 12.767759] dracut: ==> mount -n -o ro /dev/sdb /live/media
[ 12.849956] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 12.853125] ISO 9660 Extensions: RRIP_1991A
[ 12.856511] dracut: Run1: losetup -r /dev/loop0 /live/media/XXXXXXXXXXXXXXXXXXXXXXXXXXX
[ 12.869678] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 13.011578] dracut: Mounted root filesystem overlay
[ 13.152569] dracut: ==> Switching root
[ 13.155358] dracut: Calling /usr/sbin/switch_root /sysroot /sbin/init
[ 13.159565] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 15.548943] systemd[1]: Inserted module 'autofs4'
[ 15.720805] NET: Registered protocol family 10
[ 15.721232] Segment Routing with IPv6
[ 15.862889] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 15.876184] systemd[1]: Detected architecture x86-64.
[ 15.905473] systemd[1]: Set hostname to ...
[ 18.315959] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.316148] systemd[1]: Reached target Login Prompts.
[ 18.325948] systemd[1]: Listening on Process Core Dump Socket.
[ 18.326179] systemd[1]: Listening on udev Control Socket.
[ 18.326662] systemd[1]: Created slice User and Session Slice.
[ 18.326694] systemd[1]: Reached target Slices.
[ 18.326795] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 19.344988] systemd-journald[454]: Received request to flush runtime journal from PID 1
[ 20.873171] ACPI: AC Adapter [AC] (on-line)
[ 20.962287] thermal LNXTHERM:00: registered as thermal_zone0
[ 20.962290] ACPI: Thermal Zone [TZ01] (58 C)
[ 20.976125] ACPI: Battery Slot [BAT0] (battery absent)
[ 21.372501] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.400943] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.689163] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 22.068302] atl1c 0000:05:00.0: version XXX.XXX.XXX.XXX-NAPI
[ 22.071779] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 22.071783] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 22.071785] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 22.071787] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 22.071789] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 22.071791] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 22.088661] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 22.089594] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 22.089685] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 22.295442] media: Linux media interface: v0.10
[ 22.364875] intel_powerclamp: No package C-state available
[ 22.451920] videodev: Linux video capture interface: v2.00
[ 22.452312] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 22.454061] acer_wmi: Function bitmap for Communication Device: 0x1
[ 22.654460] wl: loading out-of-tree module taints kernel.
[ 22.654468] wl: module license 'MIXED/Proprietary' taints kernel.
[ 22.654469] Disabling lock debugging due to kernel taint
[ 22.693296] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller XXX.XXX.XXX.XXX (r587334)
[ 23.046861] iTCO_vendor_support: vendor-support=0
[ 23.051137] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 23.086705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.086773] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 23.086927] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 23.148828] wl 0000:04:00.0 wlp4s0: renamed from eth1
[ 23.256554] atl1c 0000:05:00.0 enp5s0: renamed from eth0
[ 23.260536] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[ 23.303822] uvcvideo 2-4:1.0: Entity type for entity Extension 5 was not initialized!
[ 23.303825] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 23.303828] uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized!
[ 23.303830] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 23.303923] input: Video WebCam: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[ 23.306160] usbcore: registered new interface driver uvcvideo
[ 23.306161] USB Video Class driver (1.1.1)
[ 23.758336] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 24.833393] device-mapper: uevent: version 1.0.3
[ 24.835276] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX
[ 52.624148] CAPI 2.0 started up with major 68 (middleware)
[ 55.115061] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 55.152947] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 55.228606] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 56.261880] NET: Registered protocol family 17
[ 56.350667] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 255.032147] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 257.039725] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 267.002281] Uniform Multi-Platform E-IDE driver
[ 267.021771] ide-cd driver 5.00
[ 267.036682] ide-gd driver 1.18
[ 267.213496] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 267.604349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 267.604406] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 267.604454] sd 4:0:0:0: Attached scsi generic sg2 type 0