[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2019-02-26 [ 0.000000] Linux version 4.12.14-lp151.28.4-default (XXX@XXX) (gcc version 7.4.0 (SUSE Linux) ) #1 SMP Fri May 24 07:57:46 UTC 2019 (af35fd1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.4-default root=UUID=HASH_1F4-3F38-E8F3-A5C6-5D47D298D5CA ramdisk_blocksize=4096 isofrom=/dev/disk/by-label/MULTIBOOT:/multiboot/openSUSE-Leap-15.1-NET-x86_64/openSUSE-Leap-15.1-NET-x86_64.iso isofrom_device=/dev/disk/by-label/MULTIBOOT isofrom_system=/multiboot/openSUSE-Leap-15.1-NET-x86_64/openSUSE-Leap-15.1-NET-x86_64.iso loader=syslinux resume=/dev/disk/by-uuid/HASH_E74-3CA3-AE97-ED14-5D1415EEB884 mitigations=auto quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf992fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf993000-0x00000000cf999fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf99a000-0x00000000d0385fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d0386000-0x00000000d0846fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d0847000-0x00000000d7db3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8759fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d875a000-0x00000000d87fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbcf4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbcf5000-0x00000000dbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Latitude E5440/061CGT, BIOS A00 09/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbcf5 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd970-0x000fd97f] mapped at [ffffffffff200970] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0308c000, 0x0308cfff] PGTABLE [ 0.000000] BRK [0x0308d000, 0x0308dfff] PGTABLE [ 0.000000] BRK [0x0308e000, 0x0308efff] PGTABLE [ 0.000000] BRK [0x0308f000, 0x0308ffff] PGTABLE [ 0.000000] BRK [0x03090000, 0x03090fff] PGTABLE [ 0.000000] BRK [0x03091000, 0x03091fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34485000-0x36239fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000EEF20 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000D8FEF090 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D8FFD010 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D8FEF1B8 00DE53 (v02 DELL CBX3 00000014 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DA7FE080 000040 [ 0.000000] ACPI: APIC 0x00000000D8FFD120 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D8FFD198 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 0x00000000D8FFD1E0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 0x00000000D8FFD358 000200 (v01 INTEL sensrhub 00000000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000D8FFD558 000151 (v01 Intel zpoddult 00001000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000D8FFD6B0 000548 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000D8FFDBF8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: HPET 0x00000000D8FFE6D0 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D8FFE708 000455 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: MCFG 0x00000000D8FFEB60 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: ASF! 0x00000000D8FFEBA0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: MSDM 0x00000000D8FFEC48 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: CSRT 0x00000000D8FFECA0 0000C4 (v01 INTL HSWULT-R 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000D8FFED68 0000B0 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21ede3000-0x21edf8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf992fff] [ 0.000000] node 0: [mem 0x00000000cf99a000-0x00000000d0385fff] [ 0.000000] node 0: [mem 0x00000000d0847000-0x00000000d7db3fff] [ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000d8759fff] [ 0.000000] node 0: [mem 0x00000000d8800000-0x00000000d8fadfff] [ 0.000000] node 0: [mem 0x00000000d9000000-0x00000000da71bfff] [ 0.000000] node 0: [mem 0x00000000da800000-0x00000000dbcf4fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ 0.000000] On node 0 totalpages: 2072981 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13969 pages used for memmap [ 0.000000] DMA32 zone: 893957 pages, LIFO batch:63 [ 0.000000] Normal zone: 18360 pages used for memmap [ 0.000000] Normal zone: 1175040 pages, LIFO batch:63 [ 0.000000] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf993000-0xcf999fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0386000-0xd0846fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd875a000-0xd87fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbcf5000-0xdbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 48 pages/cpu @ffff88021ea00000 s159744 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s159744 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2040567 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.4-default root=UUID=HASH_1F4-3F38-E8F3-A5C6-5D47D298D5CA ramdisk_blocksize=4096 isofrom=/dev/disk/by-label/MULTIBOOT:/multiboot/openSUSE-Leap-15.1-NET-x86_64/openSUSE-Leap-15.1-NET-x86_64.iso isofrom_device=/dev/disk/by-label/MULTIBOOT isofrom_system=/multiboot/openSUSE-Leap-15.1-NET-x86_64/openSUSE-Leap-15.1-NET-x86_64.iso loader=syslinux resume=/dev/disk/by-uuid/HASH_E74-3CA3-AE97-ED14-5D1415EEB884 mitigations=auto quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 5690564K/8291924K available (10256K kernel code, 1470K rwdata, 3480K rodata, 2096K init, 9888K bss, 261836K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 34497 entries in 135 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:728 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2494.393 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.78 BogoMIPS (lpj=9977572) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170303 [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.004000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.004000] CPU0: Thermal monitoring enabled (TM1) [ 0.004000] process: using mwait in idle threads [ 0.004000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.004000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.004000] Spectre V2 : Mitigation: Full generic retpoline [ 0.004000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.004000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.004000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.004000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.004000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.004000] MDS: Mitigation: Clear CPU buffers [ 0.004000] Freeing SMP alternatives memory: 32K [ 0.008056] DMAR: Host address width 39 [ 0.008057] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.008066] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.008066] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.008070] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.008071] DMAR: RMRR base: 0x000000d7f18000 end: 0x000000d7f26fff [ 0.008072] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff [ 0.008074] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.008074] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.008075] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.008388] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.008389] x2apic enabled [ 0.008394] Switched APIC routing to cluster x2apic. [ 0.008991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049322] TSC deadline timer enabled [ 0.049323] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.049395] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.049439] ... version: 3 [ 0.049439] ... bit width: 48 [ 0.049440] ... generic registers: 4 [ 0.049440] ... value mask: 0000ffffffffffff [ 0.049441] ... max period: 00007fffffffffff [ 0.049441] ... fixed-purpose events: 3 [ 0.049442] ... event mask: 000000070000000f [ 0.049963] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.049976] smp: Bringing up secondary CPUs ... [ 0.050054] x86: Booting SMP configuration: [ 0.050056] .... node #0, CPUs: #1 #2 [ 0.051656] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.051656] #3 [ 0.051656] smp: Brought up 1 node, 4 CPUs [ 0.051656] smpboot: Max logical packages: 1 [ 0.051656] smpboot: Total of 4 processors activated (19955.14 BogoMIPS) [ 0.059624] node 0 initialised, 584881 pages in 8ms [ 0.060154] devtmpfs: initialized [ 0.060154] x86/mm: Memory block size: 128MB [ 0.061897] evm: security.selinux [ 0.061898] evm: security.ima [ 0.061898] evm: security.capability [ 0.061914] PM: Registering ACPI NVS region [mem 0xcf993000-0xcf999fff] (28672 bytes) [ 0.061914] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes) [ 0.061914] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061914] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.061914] pinctrl core: initialized pinctrl subsystem [ 0.061914] RTC time: 18:47:36, date: 06/03/19 [ 0.061914] NET: Registered protocol family 16 [ 0.061914] cpuidle: using governor ladder [ 0.061914] cpuidle: using governor menu [ 0.061914] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.061914] ACPI: bus type PCI registered [ 0.061914] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.061914] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.061914] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.061914] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.061914] PCI: Using configuration type 1 for base access [ 0.061914] dmi type 0xB1 record - unknown flag [ 0.061914] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.064556] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.064556] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.064556] ACPI: Added _OSI(Module Device) [ 0.064556] ACPI: Added _OSI(Processor Device) [ 0.064556] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064556] ACPI: Added _OSI(Processor Aggregator Device) [ 0.077456] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.080748] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.085336] ACPI: Dynamic OEM Table Load: [ 0.085341] ACPI: SSDT 0xFFFF880186B82C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.085934] ACPI: Dynamic OEM Table Load: [ 0.085938] ACPI: SSDT 0xFFFF88021EB62800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.086594] ACPI: Dynamic OEM Table Load: [ 0.086598] ACPI: SSDT 0xFFFF880186BA3600 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.087712] ACPI : EC: EC started [ 0.087712] ACPI : EC: interrupt blocked [ 0.089854] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.089857] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.089858] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.089858] ACPI: Interpreter enabled [ 0.089889] ACPI: (supports S0 S3 S4 S5) [ 0.089890] ACPI: Using IOAPIC for interrupt routing [ 0.089922] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.090185] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.105322] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.105327] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.105613] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.105806] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.105807] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.106353] PCI host bridge to bus 0000:00 [ 0.106355] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.106356] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.106358] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.106359] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.106360] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.106362] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.106364] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.106365] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.106372] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.106462] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.106471] pci 0000:00:02.0: reg 0x10: [mem 0xf6c00000-0xf6ffffff 64bit] [ 0.106477] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.106481] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.106567] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.106575] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.106681] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.106696] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.106746] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.106823] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.106839] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f01f 64bit] [ 0.106900] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.106973] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002 [ 0.106986] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.106994] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.107125] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 0.107138] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.107144] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff] [ 0.107151] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.107199] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.107276] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.107290] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.107349] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.107425] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.107493] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.107635] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.107704] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.107840] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.107901] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.108039] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.108055] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.108133] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.108216] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.108387] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.108398] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.108404] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.108410] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.108415] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.108421] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.108427] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.108456] pci 0000:00:1f.2: PME# supported from D3hot [ 0.108527] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.108539] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.108555] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.110506] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501 [ 0.110534] pci 0000:01:00.0: reg 0x10: [mem 0xf7b01000-0xf7b01fff] [ 0.110547] pci 0000:01:00.0: reg 0x14: [mem 0xf7b00000-0xf7b007ff] [ 0.110691] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.123954] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.123958] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.124082] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 [ 0.124179] pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a01fff 64bit] [ 0.124467] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.136081] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.136086] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.136172] acpiphp: Slot [1] registered [ 0.136193] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.136222] pci 0000:03:00.0: reg 0x10: [mem 0xf7000000-0xf70007ff 64bit] [ 0.136234] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe0ff] [ 0.148021] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.148024] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.148027] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff] [ 0.148032] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref] [ 0.150036] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.150102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.150167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.150231] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.150295] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.150359] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.150422] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.150485] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.152199] ACPI : EC: interrupt unblocked [ 0.152216] ACPI : EC: event unblocked [ 0.152238] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.152239] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.152305] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.152305] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.152305] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.152305] vgaarb: loaded [ 0.152305] SCSI subsystem initialized [ 0.152305] libata version 3.00 loaded. [ 0.152305] Linux cec interface: v0.10 [ 0.152305] EDAC MC: Ver: 3.0.0 [ 0.154007] PCI: Using ACPI for IRQ routing [ 0.154007] PCI: pci_cache_line_size set to 64 bytes [ 0.154247] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff] [ 0.154248] e820: reserve RAM buffer [mem 0xcf993000-0xcfffffff] [ 0.154250] e820: reserve RAM buffer [mem 0xd0386000-0xd3ffffff] [ 0.154251] e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff] [ 0.154252] e820: reserve RAM buffer [mem 0xd875a000-0xdbffffff] [ 0.154254] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff] [ 0.154255] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff] [ 0.154256] e820: reserve RAM buffer [mem 0xdbcf5000-0xdbffffff] [ 0.154258] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ 0.154368] NetLabel: Initializing [ 0.154369] NetLabel: domain hash size = 128 [ 0.154369] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.154387] NetLabel: unlabeled traffic allowed by default [ 0.158012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.158012] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.160002] clocksource: Switched to clocksource hpet [ 0.169520] VFS: Disk quotas dquot_6.6.0 [ 0.169540] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.169630] AppArmor: AppArmor Filesystem Enabled [ 0.169660] pnp: PnP ACPI init [ 0.169770] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.169773] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.170121] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.170123] system 00:01: [io 0xffff] has been reserved [ 0.170124] system 00:01: [io 0xffff] has been reserved [ 0.170127] system 00:01: [io 0xffff] has been reserved [ 0.170129] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.170130] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.170132] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.170133] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.170136] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.170137] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.170139] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170163] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.170214] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.170217] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.170266] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.170268] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170304] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.170322] pnp 00:06: Plug and Play ACPI device, IDs DLL05de PNP0f13 (active) [ 0.171308] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.171807] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.171810] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.171811] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.171813] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.171815] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.171817] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.171819] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.171821] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.171823] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.171825] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.171827] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.171829] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.171831] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.174050] pnp: PnP ACPI: found 9 devices [ 0.180151] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.180174] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.180178] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.180185] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.180188] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.180195] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.180196] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.180200] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff] [ 0.180202] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref] [ 0.180208] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.180209] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.180210] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.180212] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ 0.180213] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window] [ 0.180214] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window] [ 0.180215] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window] [ 0.180216] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.180218] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.180219] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.180220] pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf79fffff] [ 0.180221] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref] [ 0.180339] NET: Registered protocol family 2 [ 0.180471] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.180558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.180669] TCP: Hash tables configured (established 65536 bind 65536) [ 0.180697] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.180717] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.180763] NET: Registered protocol family 1 [ 0.180767] NET: Registered protocol family 44 [ 0.180776] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.210014] PCI: CLS 64 bytes, default 64 [ 0.210048] Unpacking initramfs... [ 3.135423] Freeing initrd memory: 30420K [ 3.135468] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.135471] software IO TLB [mem 0xd3db4000-0xd7db4000] (64MB) mapped at [ffff8800d3db4000-ffff8800d7db3fff] [ 3.135549] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.135550] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.135550] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.135551] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.135551] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.135714] Scanning for low memory corruption every 60 seconds [ 3.136397] workingset: timestamp_bits=37 max_order=21 bucket_order=0 [ 3.136431] zbud: loaded [ 3.137676] Key type asymmetric registered [ 3.137677] Asymmetric key parser 'x509' registered [ 3.137685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.137710] io scheduler noop registered [ 3.137710] io scheduler deadline registered [ 3.137720] io scheduler cfq registered (default) [ 3.137721] io scheduler mq-deadline registered [ 3.137722] io scheduler kyber registered [ 3.137728] io scheduler bfq registered [ 3.138196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.138215] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 3.138215] vesafb: scrolling: redraw [ 3.138217] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.138230] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001800000, using 5632k, total 5632k [ 3.244634] Console: switching to colour frame buffer device 200x56 [ 3.350730] fb0: VESA VGA frame buffer device [ 3.350751] intel_idle: MWAIT substates: 0x11142120 [ 3.350752] intel_idle: v0.4.1 model 0x45 [ 3.350906] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.351008] GHES: HEST is not enabled! [ 3.351082] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.372317] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 3.372641] Non-volatile memory driver v1.3 [ 3.372699] Linux agpgart interface v0.103 [ 3.373295] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.373815] i8042: Warning: Keylock active [ 3.376146] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.376159] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.376277] mousedev: PS/2 mouse device common for all mice [ 3.376342] rtc_cmos 00:02: RTC can wake from S4 [ 3.376499] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.376533] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.376553] intel_pstate: Intel P-state driver initializing [ 3.376554] intel_pstate: Intel P-state setting Mobile Load-based policy [ 3.376761] ledtrig-cpu: registered to indicate activity on CPUs [ 3.376801] hidraw: raw HID events driver (C) Jiri Kosina [ 3.377153] NET: Registered protocol family 10 [ 3.377771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.390117] Segment Routing with IPv6 [ 3.390428] mce: Using 7 MCE banks [ 3.390462] microcode: sig=0x40651, pf=0x40, revision=0x25 [ 3.390504] microcode: Microcode Update Driver: v2.2. [ 3.390513] sched_clock: Marking stable (3390500750, 0)->(3391680817, -1180067) [ 3.390694] registered taskstats version 1 [ 3.390711] zswap: loaded using pool lzo/zbud [ 3.390778] page_owner is disabled [ 3.395428] Key type big_key registered [ 3.397272] Key type encrypted registered [ 3.397275] AppArmor: AppArmor sha1 policy hashing enabled [ 3.397277] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 3.397278] ima: Allocated hash algorithm: sha256 [ 3.397301] evm: HMAC attrs: 0x1 [ 3.397591] Magic number: 7:370:796 [ 3.397698] rtc_cmos 00:02: setting system clock to 2019-06-03 18:47:39 UTC (1559587659) [ 3.397753] PM: Checking hibernation image partition /dev/disk/by-uuid/HASH_E74-3CA3-AE97-ED14-5D1415EEB884 [ 4.156031] tsc: Refined TSC clocksource calibration: 2494.227 MHz [ 4.156041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ec29a0f, max_idle_ns: 440795214066 ns [ 4.589676] random: fast init done [ 4.710734] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input3 [ 4.723078] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2 [ 4.729647] PM: Hibernation image not present or could not be loaded. [ 4.731225] Freeing unused kernel memory: 2096K [ 4.744019] Write protecting the kernel read-only data: 16384k [ 4.744572] Freeing unused kernel memory: 2020K [ 4.746056] Freeing unused kernel memory: 616K [ 4.758909] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 4.758997] systemd[1]: Detected architecture x86-64. [ 4.758999] systemd[1]: Running in initial RAM disk. [ 4.759012] systemd[1]: No hostname configured. [ 4.759017] systemd[1]: Set hostname to ... [ 4.759036] random: systemd: uninitialized urandom read (16 bytes read) [ 4.759040] systemd[1]: Initializing machine ID from random generator. [ 4.817682] random: systemd: uninitialized urandom read (16 bytes read) [ 4.817694] systemd[1]: Reached target Swap. [ 4.817739] random: systemd: uninitialized urandom read (16 bytes read) [ 4.817782] systemd[1]: Listening on Journal Socket. [ 4.817821] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.817853] systemd[1]: Listening on udev Kernel Socket. [ 4.856590] alua: device handler registered [ 4.856927] emc: device handler registered [ 4.857204] rdac: device handler registered [ 4.860787] device-mapper: uevent: version 1.0.3 [ 4.860841] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 5.169276] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 5.170709] ACPI: Lid Switch [LID0] [ 5.170776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 5.170824] ACPI: Power Button [PBTN] [ 5.170873] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 5.170913] ACPI: Sleep Button [SBTN] [ 5.170965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 5.171002] ACPI: Power Button [PWRF] [ 5.176778] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 5.183161] ACPI: bus type USB registered [ 5.183184] usbcore: registered new interface driver usbfs [ 5.183193] usbcore: registered new interface driver hub [ 5.183208] usbcore: registered new device driver usb [ 5.191740] ahci 0000:00:1f.2: version 3.0 [ 5.191972] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 5.191994] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x7 impl RAID mode [ 5.191997] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part sxs deso sadm sds apst [ 5.211990] scsi host0: ahci [ 5.231968] scsi host1: ahci [ 5.293993] clocksource: Switched to clocksource tsc [ 5.297835] scsi host2: ahci [ 5.297837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.297911] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 42 [ 5.297913] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 42 [ 5.297915] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 42 [ 5.298116] ehci-pci: EHCI PCI platform driver [ 5.298368] checking generic (e0000000 580000) vs hw (e0000000 10000000) [ 5.298369] fb: switching to inteldrmfb from VESA VGA [ 5.298492] Console: switching to colour dummy device 80x25 [ 5.298640] [drm] Replacing VGA console driver [ 5.301730] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.301731] [drm] Driver supports precise vblank timestamp query. [ 5.302263] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.303327] sdhci: Secure Digital Host Controller Interface driver [ 5.303328] sdhci: Copyright(c) Pierre Ossman [ 5.304482] sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev 1) [ 5.306485] mmc0: Unknown controller version (3). You may experience problems. [ 5.311579] mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA [ 5.350296] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 5.351947] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.352848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 5.353072] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.353081] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 5.354144] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 5.354149] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 5.354270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.354273] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.354275] usb usb1: Product: xHCI Host Controller [ 5.354277] usb usb1: Manufacturer: Linux 4.12.14-lp151.28.4-default xhci-hcd [ 5.354278] usb usb1: SerialNumber: ... [ 5.354427] hub 1-0:1.0: USB hub found [ 5.354444] hub 1-0:1.0: 9 ports detected [ 5.355643] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.355648] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 5.355711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.355713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.355714] usb usb2: Product: xHCI Host Controller [ 5.355716] usb usb2: Manufacturer: Linux 4.12.14-lp151.28.4-default xhci-hcd [ 5.355717] usb usb2: SerialNumber: ... [ 5.355840] hub 2-0:1.0: USB hub found [ 5.355850] hub 2-0:1.0: 4 ports detected [ 5.356595] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.356601] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 5.356612] ehci-pci 0000:00:1d.0: debug port 2 [ 5.360524] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5.360542] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7c3b000 [ 5.362279] fbcon: inteldrmfb (fb0) is primary device [ 5.379990] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.380067] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.380069] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.380071] usb usb3: Product: EHCI Host Controller [ 5.380072] usb usb3: Manufacturer: Linux 4.12.14-lp151.28.4-default ehci_hcd [ 5.380073] usb usb3: SerialNumber: ... [ 5.380242] hub 3-0:1.0: USB hub found [ 5.380252] hub 3-0:1.0: 3 ports detected [ 5.400027] firewire_ohci 0000:03:00.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x10 [ 5.533953] random: crng init done [ 5.533954] random: 7 urandom warning(s) missed due to ratelimiting [ 5.611169] ata1: SATA link down (SStatus 0 SControl 300) [ 5.688036] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 5.716035] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 5.851046] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411 [ 5.851048] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.851050] usb 1-1: Product: 4-Port USB 2.0 Hub [ 5.851051] usb 1-1: Manufacturer: Generic [ 5.851868] hub 1-1:1.0: USB hub found [ 5.852975] hub 1-1:1.0: 4 ports detected [ 5.872378] usb 3-1: New USB device found, idVendor=8087, idProduct=8000 [ 5.872380] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 5.872778] hub 3-1:1.0: USB hub found [ 5.872855] hub 3-1:1.0: 8 ports detected [ 5.918020] firewire_core 0000:03:00.0: created device fw0: GUID 4205903200c20000, S400 [ 5.918024] firewire_core 0000:03:00.0: phy config: new root=ffc1, gap_count=5 [ 5.928045] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.928419] ata2.00: ATA-10: KINGSTON SA400S37240G, SBFKB1E1, max UDMA/133 [ 5.928421] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 5.928724] ata2.00: configured for UDMA/133 [ 5.928889] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1E1 PQ: 0 ANSI: 5 [ 5.929119] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.929212] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 5.929233] sd 1:0:0:0: [sda] Write Protect is off [ 5.929236] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.929265] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.929841] sda: sda1 sda2 < sda5 > [ 5.930140] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.972630] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 6.008615] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411 [ 6.008617] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.008619] usb 2-2: Product: 4-Port USB 3.0 Hub [ 6.008620] usb 2-2: Manufacturer: Generic [ 6.017784] hub 2-2:1.0: USB hub found [ 6.018979] hub 2-2:1.0: 4 ports detected [ 6.127999] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 6.160035] usb 3-1.8: new high-speed USB device number 3 using ehci-pci [ 6.243482] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.245283] ata3.00: ATAPI: HL-DT-ST DVD+/-RW GU70N, A104, max UDMA/100 [ 6.247347] ata3.00: configured for UDMA/100 [ 6.248658] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU70N A104 PQ: 0 ANSI: 5 [ 6.268394] usb 3-1.8: New USB device found, idVendor=0424, idProduct=2514 [ 6.268396] usb 3-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.268772] hub 3-1.8:1.0: USB hub found [ 6.268854] hub 3-1.8:1.0: 4 ports detected [ 6.278196] usb 1-2: New USB device found, idVendor=062a, idProduct=4101 [ 6.278198] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.278199] usb 1-2: Product: 2.4G Keyboard Mouse [ 6.278201] usb 1-2: Manufacturer: MOSART Semi. [ 6.280775] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 6.283130] usbcore: registered new interface driver usbhid [ 6.283130] usbhid: USB HID core driver [ 6.284104] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:062A:4101.0001/input/input9 [ 6.344344] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2/input0 [ 6.344745] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:062A:4101.0002/input/input10 [ 6.356037] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd [ 6.404379] hid-generic 0003:062A:4101.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2/input1 [ 6.472112] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=5411 [ 6.472115] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.472116] usb 1-1.1: Product: 4-Port USB 2.0 Hub [ 6.472117] usb 1-1.1: Manufacturer: Generic [ 6.472980] hub 1-1.1:1.0: USB hub found [ 6.474065] hub 1-1.1:1.0: 4 ports detected [ 6.548997] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd [ 6.555319] Console: switching to colour frame buffer device 200x56 [ 6.555988] usb 3-1.8.1: new full-speed USB device number 4 using ehci-pci [ 6.571351] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.584960] usb 2-2.1: New USB device found, idVendor=0bda, idProduct=0411 [ 6.584962] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.584963] usb 2-2.1: Product: 4-Port USB 3.0 Hub [ 6.584964] usb 2-2.1: Manufacturer: Generic [ 6.595151] hub 2-2.1:1.0: USB hub found [ 6.596700] hub 2-2.1:1.0: 4 ports detected [ 6.647164] PM: Starting manual resume from disk [ 6.647168] PM: Hibernation image partition 8:5 present [ 6.647168] PM: Looking for hibernation image. [ 6.647331] PM: Image not found (code -22) [ 6.647332] PM: Hibernation image not present or could not be loaded. [ 6.673352] usb 3-1.8.1: New USB device found, idVendor=138a, idProduct=003f [ 6.673354] usb 3-1.8.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.673355] usb 3-1.8.1: SerialNumber: ... [ 6.691973] raid6: sse2x1 gen() 6025 MB/s [ 6.703961] usb 1-6: new high-speed USB device number 5 using xhci_hcd [ 6.751959] usb 3-1.8.2: new full-speed USB device number 5 using ehci-pci [ 6.759968] raid6: sse2x1 xor() 5768 MB/s [ 6.827973] raid6: sse2x2 gen() 11767 MB/s [ 6.861979] usb 3-1.8.2: New USB device found, idVendor=8087, idProduct=07dc [ 6.861981] usb 3-1.8.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.895973] raid6: sse2x2 xor() 7741 MB/s [ 6.925688] usb 1-6: New USB device found, idVendor=0c45, idProduct=64d0 [ 6.925689] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 6.925691] usb 1-6: Product: Laptop_Integrated_Webcam_HD [ 6.925692] usb 1-6: Manufacturer: CN0767N972487393B18CA00 [ 6.931982] usb 1-1.2: new high-speed USB device number 6 using xhci_hcd [ 6.963975] raid6: sse2x4 gen() 14002 MB/s [ 7.031972] raid6: sse2x4 xor() 8859 MB/s [ 7.047680] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=5411 [ 7.047682] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.047683] usb 1-1.2: Product: 4-Port USB 2.0 Hub [ 7.047684] usb 1-1.2: Manufacturer: Generic [ 7.049115] hub 1-1.2:1.0: USB hub found [ 7.050266] hub 1-1.2:1.0: 4 ports detected [ 7.099974] raid6: avx2x1 gen() 19343 MB/s [ 7.120587] usb 2-2.2: new SuperSpeed USB device number 4 using xhci_hcd [ 7.154772] usb 2-2.2: New USB device found, idVendor=0bda, idProduct=0411 [ 7.154774] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.154775] usb 2-2.2: Product: 4-Port USB 3.0 Hub [ 7.154776] usb 2-2.2: Manufacturer: Generic [ 7.164631] hub 2-2.2:1.0: USB hub found [ 7.165957] hub 2-2.2:1.0: 4 ports detected [ 7.167955] raid6: avx2x1 xor() 13308 MB/s [ 7.227982] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd [ 7.235972] raid6: avx2x2 gen() 22416 MB/s [ 7.303972] raid6: avx2x2 xor() 14051 MB/s [ 7.342583] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=5411 [ 7.342585] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.342586] usb 1-1.3: Product: 4-Port USB 2.0 Hub [ 7.342587] usb 1-1.3: Manufacturer: Generic [ 7.343378] hub 1-1.3:1.0: USB hub found [ 7.344700] hub 1-1.3:1.0: 4 ports detected [ 7.371973] raid6: avx2x4 gen() 25449 MB/s [ 7.416587] usb 2-2.3: new SuperSpeed USB device number 5 using xhci_hcd [ 7.439966] raid6: avx2x4 xor() 16677 MB/s [ 7.439967] raid6: using algorithm avx2x4 gen() 25449 MB/s [ 7.439968] raid6: .... xor() 16677 MB/s, rmw enabled [ 7.439969] raid6: using avx2x2 recovery algorithm [ 7.442823] xor: automatically using best checksumming function avx [ 7.449973] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.449986] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.450138] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 7.450943] usb 2-2.3: New USB device found, idVendor=0bda, idProduct=0411 [ 7.450945] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.450947] usb 2-2.3: Product: 4-Port USB 3.0 Hub [ 7.450949] usb 2-2.3: Manufacturer: Generic [ 7.460840] hub 2-2.3:1.0: USB hub found [ 7.462027] hub 2-2.3:1.0: 4 ports detected [ 7.464506] Btrfs loaded, crc32c=crc32c-intel, assert=on [ 7.466937] BTRFS: device fsid HASH_1F4-3F38-E8F3-A5C6-5D47D298D5CA devid 1 transid 14489 /dev/sda1 [ 7.503682] BTRFS info (device sda1): disk space caching is enabled [ 7.503685] BTRFS info (device sda1): has skinny extents [ 7.519978] usb 1-1.2.2: new high-speed USB device number 8 using xhci_hcd [ 7.525002] BTRFS info (device sda1): detected SSD devices, enabling SSD mode [ 7.624103] usb 1-1.2.2: New USB device found, idVendor=05e3, idProduct=0736 [ 7.624105] usb 1-1.2.2: New USB device strings: Mfr=3, Product=4, SerialNumber=... [ 7.624107] usb 1-1.2.2: Product: USB Storage [ 7.624108] usb 1-1.2.2: Manufacturer: Generic [ 7.624109] usb 1-1.2.2: SerialNumber: ... [ 7.627477] usb-storage 1-1.2.2:1.0: USB Mass Storage device detected [ 7.627713] scsi host3: usb-storage 1-1.2.2:1.0 [ 7.627791] usbcore: registered new interface driver usb-storage [ 7.628521] usbcore: registered new interface driver uas [ 7.699964] usb 1-1.4: new high-speed USB device number 9 using xhci_hcd [ 7.794527] systemd-journald[157]: Received SIGTERM from PID 1 (systemd). [ 7.814207] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=5411 [ 7.814209] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.814210] usb 1-1.4: Product: 4-Port USB 2.0 Hub [ 7.814211] usb 1-1.4: Manufacturer: Generic [ 7.816085] hub 1-1.4:1.0: USB hub found [ 7.817315] hub 1-1.4:1.0: 4 ports detected [ 7.823465] systemd: 18 output lines suppressed due to ratelimiting [ 7.888618] usb 2-2.4: new SuperSpeed USB device number 6 using xhci_hcd [ 7.928583] usb 2-2.4: New USB device found, idVendor=0bda, idProduct=0411 [ 7.928586] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.928588] usb 2-2.4: Product: 4-Port USB 3.0 Hub [ 7.928589] usb 2-2.4: Manufacturer: Generic [ 7.939449] hub 2-2.4:1.0: USB hub found [ 7.940860] hub 2-2.4:1.0: 4 ports detected [ 8.138674] BTRFS info (device sda1): disk space caching is enabled [ 8.376336] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.376342] ACPI: Battery Slot [BAT0] (battery present) [ 8.378532] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.378539] ACPI: Battery Slot [BAT1] (battery absent) [ 8.382035] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 8.382087] ACPI: AC Adapter [AC] (on-line) [ 8.422418] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.423798] pps_core: LinuxPPS API ver. 1 registered [ 8.423800] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 8.425964] PTP clock support registered [ 8.441445] parport_pc 00:07: [io 0x0378-0x037b] [ 8.441459] parport_pc 00:07: [io 0x0278-0x027b] [ 8.441469] parport_pc 00:07: [io 0x03bc-0x03bf] [ 8.441477] parport_pc 00:07: [io 0x0378-0x037b] [ 8.443380] parport_pc 00:07: [irq 7] [ 8.458471] parport_pc 00:07: activated [ 8.458475] parport_pc 00:07: reported by Plug and Play ACPI [ 8.468600] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 8.477679] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.477683] ACPI: Thermal Zone [THM] (25 C) [ 8.481528] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 8.481530] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.482569] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 8.482598] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 8.485536] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12 [ 8.485610] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input13 [ 8.485673] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input14 [ 8.485737] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input15 [ 8.485801] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input16 [ 8.493012] Intel(R) Wireless WiFi driver for Linux [ 8.493013] Copyright(c) 2003- 2015 Intel Corporation [ 8.499000] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 8.499004] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 8.499006] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 8.499008] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 8.499009] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 8.499011] snd_hda_codec_realtek hdaudioC2D0: Dock Mic=0x19 [ 8.499013] snd_hda_codec_realtek hdaudioC2D0: Headset Mic=0x1a [ 8.499015] snd_hda_codec_realtek hdaudioC2D0: Internal Mic=0x12 [ 8.512783] AVX2 version of gcm_enc/dec engaged. [ 8.512784] AES CTR mode by8 optimization enabled [ 8.535017] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm [ 8.556515] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17 [ 8.556579] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18 [ 8.556647] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input19 [ 8.556711] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input20 [ 8.559071] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 8.561407] dell-smbios HASH_3CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 8.563014] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 8.563556] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_994-A997-11DA-B012-B622A1EF5492/input/input21 [ 8.593660] dell_laptop: Using dell-rbtn acpi driver for receiving events [ 8.609551] iTCO_vendor_support: vendor-support=0 [ 8.615948] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.616028] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 8.620817] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 8.640922] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 0272 PQ: 0 ANSI: 0 [ 8.641088] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 8.662532] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 8.673541] iwlwifi 0000:02:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 8.675996] ppdev: user-space parallel port driver [ 8.747431] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 8.747434] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 8.747468] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 8.752612] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.761330] intel_rapl: Found RAPL domain package [ 8.761332] intel_rapl: Found RAPL domain core [ 8.761333] intel_rapl: Found RAPL domain uncore [ 8.761334] intel_rapl: Found RAPL domain dram [ 8.761337] intel_rapl: RAPL package 0 domain package locked by BIOS [ 8.761341] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 8.786302] e1000e 0000:00:19.0 em1: renamed from eth0 [ 8.800211] Adding 8289276k swap on /dev/sda5. Priority:-1 extents:1 across:8289276k SSFS [ 8.877907] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.879300] sd 3:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 8.880110] sd 3:0:0:0: [sdb] Write Protect is off [ 8.880113] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 8.880943] sd 3:0:0:0: [sdb] No Caching mode page found [ 8.881558] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 8.885882] sdb: sdb1 [ 8.888060] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 8.933687] firewire_core 0000:03:00.0: created device fw1: GUID 000aac0400581b17, S400 [ 9.098278] systemd-journald[420]: Received request to flush runtime journal from PID 1 [ 9.478720] Linux video capture interface: v2.00 [ 9.621503] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0) [ 9.660994] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input22 [ 9.661085] usbcore: registered new interface driver uvcvideo [ 9.661086] USB Video Class driver (1.1.1) [ 10.323819] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 10.337132] ip6_tables: (C) FCB9-52CA Netfilter Core Team [ 10.361237] Ebtables v2.0 registered [ 10.391545] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 10.483856] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 10.520282] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 10.597892] Bluetooth: Core ver 2.22 [ 10.597906] NET: Registered protocol family 31 [ 10.597907] Bluetooth: HCI device and connection manager initialized [ 10.597909] Bluetooth: HCI socket layer initialized [ 10.597911] Bluetooth: L2CAP socket layer initialized [ 10.597915] Bluetooth: SCO socket layer initialized [ 10.732113] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 10.735820] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.741398] Netfilter messages via NETLINK v0.30. [ 10.745790] ip_set: protocol 6 [ 10.864633] usbcore: registered new interface driver btusb [ 10.878548] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 10.880128] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 10.978876] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.099526] Bluetooth: hci0: Intel firmware patch completed and activated [ 11.157029] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.157031] Bluetooth: BNEP filters: protocol multicast [ 11.157034] Bluetooth: BNEP socket layer initialized [ 11.251866] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.407521] NET: Registered protocol family 17 [ 11.469429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.219388] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 12.219391] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO [ 12.219418] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready [ 14.891302] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.958494] Bluetooth: RFCOMM TTY layer initialized [ 16.958503] Bluetooth: RFCOMM socket layer initialized [ 16.958508] Bluetooth: RFCOMM ver 1.11 [ 44.673154] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.676365] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.760988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 164.773079] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 164.776411] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 505.722023] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 671.807377] BTRFS info (device sda1): qgroup scan completed (inconsistency flag cleared) [ 738.159470] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 739.055086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 739.055087] EDD information not available. [ 746.300512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 746.300514] EDD information not available. [ 756.764362] parport_pc 00:07: reported by Plug and Play ACPI [ 756.771832] lp: driver loaded but no devices found [ 756.898402] parport_pc 00:07: reported by Plug and Play ACPI [ 756.907831] lp: driver loaded but no devices found [ 757.952222] parport_pc 00:07: reported by Plug and Play ACPI [ 757.958044] lp: driver loaded but no devices found [ 767.448167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 767.448168] EDD information not available. [ 769.288421] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 769.288423] EDD information not available. [ 820.718131] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1135.684893] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1450.669265] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1765.674286] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1785.038084] fuse init (API version 7.26) [ 2080.663726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2395.679400] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2710.661541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2950.911929] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 2950.911932] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known. [ 2950.920784] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio. [ 2950.920787] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled) [ 2951.126015] usb 3-1.8.2: USB disconnect, device number 5 [ 2951.688921] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 2951.688923] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known. [ 2951.821081] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 2951.821083] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled) [ 2952.062259] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2952.109917] usb 3-1.8.2: new full-speed USB device number 6 using ehci-pci [ 2952.133855] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2952.224061] usb 3-1.8.2: New USB device found, idVendor=8087, idProduct=07dc [ 2952.224064] usb 3-1.8.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2952.238695] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 2952.239708] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 2952.458704] Bluetooth: hci0: Intel firmware patch completed and activated [ 3011.656405] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3316.660458] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3631.673812] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3946.660085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4261.700338] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4576.708046] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4891.689173] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5206.648424] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5521.685604] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5652.652265] firewire_core 0000:03:00.0: phy config: new root=ffc1, gap_count=5 [ 5653.174061] firewire_core 0000:03:00.0: created device fw1: GUID 000a3501e38d8fdc, S400 [ 5836.645682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6151.707893] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6466.646915] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6544.527411] snd-fireface fw1.0: transaction failed: bus reset [ 6552.856447] firewire_ohci 0000:03:00.0: isochronous cycle inconsistent [ 6553.436446] firewire_core 0000:03:00.0: phy config: new root=ffc1, gap_count=5 [ 6558.320741] firewire_core 0000:03:00.0: created device fw1: GUID 000a3501e38d8fdc, S400 [ 6637.351035] snd-fireface fw1.0: transaction failed: bus reset [ 6648.921028] firewire_ohci 0000:03:00.0: isochronous cycle inconsistent [ 6649.428872] firewire_core 0000:03:00.0: created device fw1: GUID 000aac0400581b17, S400 [ 6649.428876] firewire_core 0000:03:00.0: phy config: new root=ffc1, gap_count=5 [ 6651.438982] firewire_core 0000:03:00.0: BM lock failed (timeout), making local node (ffc0) root [ 6651.438985] firewire_core 0000:03:00.0: phy config: new root=ffc0, gap_count=5 [ 6705.006712] firewire fw1.0: transaction failed: bus reset [ 6705.062715] firewire fw1.0: transaction failed: bus reset [ 6705.118713] firewire fw1.0: transaction failed: bus reset [ 6781.689974] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7090.743922] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=424297 end=424298) time 1804 us, min 1043, max 1049, scanline start 948, end 1064 [ 7096.651496] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7411.696191] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7726.650545] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7762.235359] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=464508 end=464509) time 1814 us, min 1043, max 1049, scanline start 1042, end 79 [ 7788.401302] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=466075 end=466076) time 1804 us, min 1043, max 1049, scanline start 936, end 1053 [ 7793.544909] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=466383 end=466384) time 1808 us, min 1043, max 1049, scanline start 954, end 1070 [ 7866.471187] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=470750 end=470751) time 1803 us, min 1043, max 1049, scanline start 1021, end 58 [ 7980.158312] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=477558 end=477559) time 1813 us, min 1043, max 1049, scanline start 971, end 7 [ 7995.873087] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=478499 end=478500) time 1806 us, min 1043, max 1049, scanline start 1027, end 64 [ 8041.693983] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8356.654015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8405.251967] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=503014 end=503015) time 1804 us, min 1043, max 1049, scanline start 959, end 1076 [ 8521.210909] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=509958 end=509959) time 1803 us, min 1043, max 1049, scanline start 957, end 1074 [ 8617.666304] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=515734 end=515735) time 1813 us, min 1043, max 1049, scanline start 1024, end 61 [ 8671.691041] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8986.655450] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9095.395922] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=544342 end=544343) time 1811 us, min 1043, max 1049, scanline start 1024, end 61 [ 9096.564434] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=544412 end=544413) time 1804 us, min 1043, max 1049, scanline start 998, end 35 [ 9136.175569] libasound_modul[18405]: segfault at 1 ip 0000000000000001 sp 00007ffede91c9b8 error 14 in libasound_module_conf_pulse.so[7f4887a9a000+1000] [ 9137.943372] libasound_modul[18407]: segfault at 1 ip 0000000000000001 sp 00007ffebd25ece8 error 14 in libasound_module_conf_pulse.so[7fca92d53000+1000] [ 9142.514448] libasound_modul[18409]: segfault at 1 ip 0000000000000001 sp 00007ffcf75f0178 error 14 in libasound_module_pcm_usb_stream.so[7efff2a83000+3000]