Probe #88b07392c2 of Fujitsu Siemens LIFEBOOK E8410
Log: dmesg
[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Linux version 5.4.0-26-generic (XXX@XXX) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 (Ubuntu 5.4.0-26.30-generic 5.4.30)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed quiet splash nomodeset ---
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007decffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ded0000-0x000000007dee0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007dee1000-0x000000007dee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dee3000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU SIEMENS LIFEBOOK E8410/FJNB1D0, BIOS Version 1.16 06/13/2008
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x7ded0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07DF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 2015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] BRK [0x4fa01000, 0x4fa01fff] PGTABLE
[ 0.000000] BRK [0x4fa02000, 0x4fa02fff] PGTABLE
[ 0.000000] BRK [0x4fa03000, 0x4fa03fff] PGTABLE
[ 0.000000] BRK [0x4fa04000, 0x4fa04fff] PGTABLE
[ 0.000000] BRK [0x4fa05000, 0x4fa05fff] PGTABLE
[ 0.000000] BRK [0x4fa06000, 0x4fa06fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x78902000-0x7decffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6290 000024 (v02 FUJ )
[ 0.000000] ACPI: XSDT 0x000000007DED7726 000084 (v01 FSC PC 01160000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007DEDECD9 0002D1 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: FACP 0x000000007DEDEFAA 0000F4 (v03 FSC PC 01160000 FUJ 00000100)
[ 0.000000] ACPI: DSDT 0x000000007DED77AA 00752F (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: FACS 0x000000007DEE2FC0 000040
[ 0.000000] ACPI: FACS 0x000000007DEE2FC0 000040
[ 0.000000] ACPI: HPET 0x000000007DEDF09E 000038 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: MCFG 0x000000007DEDF0D6 00003C (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007DEDF112 0004EF (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007DEDF601 0001CA (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007DEDF7CB 0010E9 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 0x000000007DEE08B4 000447 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: APIC 0x000000007DEE0CFB 000068 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: BOOT 0x000000007DEE0D63 000028 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: ASF! 0x000000007DEE0D8B 00008B (v16 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.000000] ACPI: SLIC 0x000000007DEE0E16 000176 (v01 FSC PC 01160000 FUJ 00000100)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007decffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x788d7000-0x78901fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007decffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007decffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 8595 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007decffff]
[ 0.000000] On node 0 totalpages: 515693
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7996 pages used for memmap
[ 0.000000] DMA32 zone: 511696 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[ 0.000000] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507612
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed quiet splash nomodeset ---
[ 0.000000] You have booted with nomodeset. This means your GPU drivers are DISABLED
[ 0.000000] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[ 0.000000] Unless you actually understand what nomodeset does, you should reboot without enabling it
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1905508K/2062772K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 157264K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 44478 entries in 174 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20190816
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: PIT calibration matches HPET. 1 loops
[ 0.024000] tsc: Detected 2394.019 MHz processor
[ 0.000005] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22822598150, max_idle_ns: 440795305270 ns
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.03 BogoMIPS (lpj=9576076)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000048] LSM: Security Framework initializing
[ 0.000062] Yama: becoming mindful.
[ 0.000098] AppArmor: AppArmor initialized
[ 0.000146] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000158] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000181] *** VALIDATE tmpfs ***
[ 0.000374] *** VALIDATE proc ***
[ 0.000450] *** VALIDATE cgroup1 ***
[ 0.000451] *** VALIDATE cgroup2 ***
[ 0.000510] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.000513] process: using mwait in idle threads
[ 0.000517] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.000517] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.000521] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.000523] Spectre V2 : Mitigation: Full generic retpoline
[ 0.000523] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.000524] Speculative Store Bypass: Vulnerable
[ 0.000528] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.000691] Freeing SMP alternatives memory: 40K
[ 0.115541] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.115705] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.115713] ... version: 2
[ 0.115714] ... bit width: 40
[ 0.115714] ... generic registers: 2
[ 0.115715] ... value mask: 000000ffffffffff
[ 0.115716] ... max period: 000000007fffffff
[ 0.115717] ... fixed-purpose events: 3
[ 0.115717] ... event mask: 0000000700000003
[ 0.115772] rcu: Hierarchical SRCU implementation.
[ 0.116007] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.116007] smp: Bringing up secondary CPUs ...
[ 0.116007] x86: Booting SMP configuration:
[ 0.116007] .... node #0, CPUs: #1
[ 0.118060] smp: Brought up 1 node, 2 CPUs
[ 0.118060] smpboot: Max logical packages: 1
[ 0.118060] smpboot: Total of 2 processors activated (9576.07 BogoMIPS)
[ 0.120245] devtmpfs: initialized
[ 0.120245] x86/mm: Memory block size: 128MB
[ 0.120518] PM: Registering ACPI NVS region [mem 0x7dee1000-0x7dee2fff] (8192 bytes)
[ 0.120518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.120518] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.120518] pinctrl core: initialized pinctrl subsystem
[ 0.120518] PM: RTC time: 21:50:56, date: 2020-05-20
[ 0.120518] NET: Registered protocol family 16
[ 0.120518] EISA bus registered
[ 0.120518] cpuidle: using governor ladder
[ 0.120518] cpuidle: using governor menu
[ 0.120518] Simple Boot Flag at 0x7b set to 0x1
[ 0.120518] ACPI: bus type PCI registered
[ 0.120518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120518] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.120518] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.120518] PCI: Using configuration type 1 for base access
[ 0.124797] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.128151] ACPI: Added _OSI(Module Device)
[ 0.128152] ACPI: Added _OSI(Processor Device)
[ 0.128153] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128154] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128156] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.128157] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.128158] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.136879] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.137702] ACPI: Dynamic OEM Table Load:
[ 0.137709] ACPI: SSDT 0xFFFF8AF7B5F3F000 0003C3 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.139459] ACPI: Dynamic OEM Table Load:
[ 0.139464] ACPI: SSDT 0xFFFF8AF7B5F3EC00 0002BC (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.140338] ACPI: Dynamic OEM Table Load:
[ 0.140344] ACPI: SSDT 0xFFFF8AF7B5E74000 0005CD (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.144104] ACPI: Dynamic OEM Table Load:
[ 0.144110] ACPI: SSDT 0xFFFF8AF7B547B900 0000B8 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.144733] ACPI: Dynamic OEM Table Load:
[ 0.144738] ACPI: SSDT 0xFFFF8AF7B5466720 000047 (v01 FUJ FJNB1D0 01160000 FUJ 00000100)
[ 0.145712] ACPI: EC: EC started
[ 0.145713] ACPI: EC: interrupt blocked
[ 0.145749] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.145751] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.145753] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.145754] ACPI: Interpreter enabled
[ 0.145782] ACPI: (supports S0 S3 S4 S5)
[ 0.145783] ACPI: Using IOAPIC for interrupt routing
[ 0.145815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.146195] ACPI: Enabled 13 GPEs in block 00 to 1F
[ 0.156455] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.157093] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.157958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.157965] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.157971] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.157986] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.158781] PCI host bridge to bus 0000:00
[ 0.158783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.158785] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.158787] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.158788] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.158790] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.158791] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.158793] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.158794] pci_bus 0000:00: root bus resource [mem 0x7e000000-0xfebfffff window]
[ 0.158796] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.158809] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.158968] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.159022] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.159202] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
[ 0.159229] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
[ 0.159240] pci 0000:00:19.0: reg 0x14: [mem 0xfe425000-0xfe425fff]
[ 0.159252] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
[ 0.159338] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.159468] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.159543] pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
[ 0.159705] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.159766] pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
[ 0.159925] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.159954] pci 0000:00:1a.7: reg 0x10: [mem 0xfe426c00-0xfe426fff]
[ 0.160062] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.160200] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.160230] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit]
[ 0.160342] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.160490] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.160620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.160770] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.160898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.161049] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.161183] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.161353] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.161431] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
[ 0.161589] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.161650] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
[ 0.161799] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.161859] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
[ 0.162021] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.162048] pci 0000:00:1d.7: reg 0x10: [mem 0xfe427000-0xfe4273ff]
[ 0.162150] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.162282] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.162497] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
[ 0.162614] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.162619] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.162623] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f)
[ 0.162628] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 06e8 (mask 0007)
[ 0.162782] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.162805] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.162817] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.162828] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.162840] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.162851] pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f]
[ 0.162877] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.162878] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.162880] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.162881] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.163010] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.163037] pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
[ 0.163049] pci 0000:00:1f.2: reg 0x14: [io 0x1c1c-0x1c1f]
[ 0.163060] pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
[ 0.163071] pci 0000:00:1f.2: reg 0x1c: [io 0x1c18-0x1c1b]
[ 0.163082] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
[ 0.163093] pci 0000:00:1f.2: reg 0x24: [mem 0xfe426000-0xfe4267ff]
[ 0.163153] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163294] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.163316] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.163356] pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
[ 0.163570] pci 0000:01:00.0: [10de:0428] type 00 class 0x030000
[ 0.163602] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.163622] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.163643] pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit]
[ 0.163657] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.163672] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.163682] pci 0000:01:00.0: enabling Extended Tags
[ 0.163885] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.163887] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.163890] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdeffffff]
[ 0.163894] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.163965] pci 0000:00:1c.0: PCI bridge to [bus 04-07]
[ 0.163970] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff]
[ 0.163974] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.163981] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.164085] acpiphp: Slot [1] registered
[ 0.164092] pci 0000:00:1c.1: PCI bridge to [bus 08-0f]
[ 0.164096] pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
[ 0.164101] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff]
[ 0.164108] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.164211] pci 0000:14:00.0: [8086:4229] type 00 class 0x028000
[ 0.164272] pci 0000:14:00.0: reg 0x10: [mem 0xfe000000-0xfe001fff 64bit]
[ 0.164487] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold
[ 0.164676] pci 0000:00:1c.3: PCI bridge to [bus 14-17]
[ 0.164684] pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.164715] pci_bus 0000:1c: extended config space not accessible
[ 0.164752] pci 0000:1c:03.0: [1217:7136] type 02 class 0x060700
[ 0.164777] pci 0000:1c:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.164822] pci 0000:1c:03.0: supports D1 D2
[ 0.164824] pci 0000:1c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.164890] pci 0000:1c:03.1: [1217:7136] type 02 class 0x060700
[ 0.164911] pci 0000:1c:03.1: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.164956] pci 0000:1c:03.1: supports D1 D2
[ 0.164957] pci 0000:1c:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165021] pci 0000:1c:03.2: [1217:7120] type 00 class 0x080501
[ 0.165045] pci 0000:1c:03.2: reg 0x10: [mem 0xfe100000-0xfe1000ff]
[ 0.165161] pci 0000:1c:03.2: supports D1 D2
[ 0.165163] pci 0000:1c:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165227] pci 0000:1c:03.3: [1217:7130] type 00 class 0x018000
[ 0.165251] pci 0000:1c:03.3: reg 0x10: [mem 0xfe101000-0xfe101fff]
[ 0.165368] pci 0000:1c:03.3: supports D1 D2
[ 0.165369] pci 0000:1c:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165431] pci 0000:1c:03.4: [1217:00f7] type 00 class 0x0c0010
[ 0.165451] pci 0000:1c:03.4: reg 0x10: [mem 0xfe102000-0xfe102fff]
[ 0.165463] pci 0000:1c:03.4: reg 0x14: [mem 0xfe100800-0xfe100fff]
[ 0.165550] pci 0000:1c:03.4: supports D1 D2
[ 0.165552] pci 0000:1c:03.4: PME# supported from D0 D1 D2 D3hot
[ 0.165667] pci 0000:00:1e.0: PCI bridge to [bus 1c-1d] (subtractive decode)
[ 0.165674] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.165682] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.165684] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.165685] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.165687] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.165689] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.165690] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.165692] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.165693] pci 0000:00:1e.0: bridge window [mem 0x7e000000-0xfebfffff window] (subtractive decode)
[ 0.165705] pci 0000:1c:03.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.165738] pci_bus 0000:1d: extended config space not accessible
[ 0.165756] pci_bus 0000:1d: busn_res: [bus 1d] end can not be updated to 20
[ 0.165784] pci_bus 0000:21: extended config space not accessible
[ 0.165802] pci_bus 0000:21: busn_res: can not insert [bus 21-1d] under [bus 1c-1d] (conflicts with (null) [bus 1c-1d])
[ 0.165806] pci_bus 0000:21: busn_res: [bus 21-1d] end is updated to 24
[ 0.165809] pci_bus 0000:21: busn_res: can not insert [bus 21-24] under [bus 1c-1d] (conflicts with (null) [bus 1c-1d])
[ 0.165812] pci 0000:1c:03.1: devices behind bridge are unusable because [bus 21-24] cannot be assigned for them
[ 0.165815] pci 0000:00:1e.0: bridge has subordinate 1d but max busn 24
[ 0.166137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.166239] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.166339] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.166438] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.166538] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.166638] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.166738] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.166838] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168641] ACPI: EC: interrupt unblocked
[ 0.168641] ACPI: EC: event unblocked
[ 0.168641] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.168641] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.168646] iommu: Default domain type: Translated
[ 0.168646] SCSI subsystem initialized
[ 0.168646] libata version 3.00 loaded.
[ 0.168646] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.168646] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.168646] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.168646] vgaarb: loaded
[ 0.168646] ACPI: bus type USB registered
[ 0.168646] usbcore: registered new interface driver usbfs
[ 0.168646] usbcore: registered new interface driver hub
[ 0.168646] usbcore: registered new device driver usb
[ 0.168646] pps_core: LinuxPPS API ver. 1 registered
[ 0.168646] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.168646] PTP clock support registered
[ 0.168646] EDAC MC: Ver: 3.0.0
[ 0.168646] PCI: Using ACPI for IRQ routing
[ 0.172011] PCI: pci_cache_line_size set to 64 bytes
[ 0.172011] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.172011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.172011] e820: reserve RAM buffer [mem 0x7ded0000-0x7fffffff]
[ 0.172015] NetLabel: Initializing
[ 0.172015] NetLabel: domain hash size = 128
[ 0.172015] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.172015] NetLabel: unlabeled traffic allowed by default
[ 0.173173] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.173177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.173181] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.173181] clocksource: Switched to clocksource tsc-early
[ 0.193115] *** VALIDATE bpf ***
[ 0.193271] VFS: Disk quotas dquot_6.6.0
[ 0.193315] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.193354] *** VALIDATE ramfs ***
[ 0.193358] *** VALIDATE hugetlbfs ***
[ 0.193500] AppArmor: AppArmor Filesystem Enabled
[ 0.193551] pnp: PnP ACPI init
[ 0.193880] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.193882] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.193884] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.193886] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.193888] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.193890] system 00:00: [io 0x1100-0x111f] has been reserved
[ 0.193892] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.193894] system 00:00: [io 0x1640-0x164f] has been reserved
[ 0.193895] system 00:00: [io 0xf800-0xf87f] has been reserved
[ 0.193897] system 00:00: [io 0xf880-0xf8ff] has been reserved
[ 0.193899] system 00:00: [io 0xfc00-0xfc7f] has been reserved
[ 0.193901] system 00:00: [io 0xfc80-0xfcff] has been reserved
[ 0.193903] system 00:00: [io 0xfd00-0xfd7f] has been reserved
[ 0.193905] system 00:00: [io 0xfe00-0xfe03] has been reserved
[ 0.193913] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194121] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.194124] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.194125] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.194127] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.194129] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.194131] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.194133] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.194135] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.194137] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.194142] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194555] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.194624] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.194670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195148] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.195746] pnp 00:06: [dma 3]
[ 0.195803] pnp 00:06: Plug and Play ACPI device, IDs SMCf010 (active)
[ 0.196343] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.196749] pnp: PnP ACPI: found 8 devices
[ 0.199445] thermal_sys: Registered thermal governor 'fair_share'
[ 0.199446] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.199448] thermal_sys: Registered thermal governor 'step_wise'
[ 0.199449] thermal_sys: Registered thermal governor 'user_space'
[ 0.199450] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.203960] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.204012] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-07] add_size 1000
[ 0.204015] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-07] add_size 200000 add_align 100000
[ 0.204017] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04-07] add_size 200000 add_align 100000
[ 0.204019] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08-0f] add_size 1000
[ 0.204022] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-0f] add_size 200000 add_align 100000
[ 0.204024] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 08-0f] add_size 200000 add_align 100000
[ 0.204026] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 14-17] add_size 1000
[ 0.204029] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 14-17] add_size 200000 add_align 100000
[ 0.204047] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 1c-1d] add_size 1000
[ 0.204064] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.204071] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.204074] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80400000-0x805fffff]
[ 0.204080] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.204085] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.204089] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.204091] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.204094] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.204097] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.204100] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80a00000-0x80a000ff]
[ 0.204108] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[ 0.204110] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 0.204113] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.204115] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.204118] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdeffffff]
[ 0.204121] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.204125] pci 0000:00:1c.0: PCI bridge to [bus 04-07]
[ 0.204127] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.204133] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.204137] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.204144] pci 0000:00:1c.1: PCI bridge to [bus 08-0f]
[ 0.204146] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.204152] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff]
[ 0.204156] pci 0000:00:1c.1: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.204163] pci 0000:00:1c.3: PCI bridge to [bus 14-17]
[ 0.204166] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.204174] pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfe0fffff]
[ 0.204178] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.204191] pci 0000:1c:03.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
[ 0.204198] pci 0000:1c:03.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref]
[ 0.204201] pci 0000:1c:03.0: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
[ 0.204205] pci 0000:1c:03.1: BAR 0: assigned [mem 0x90000000-0x90000fff]
[ 0.204212] pci 0000:1c:03.1: BAR 15: assigned [mem 0x94000000-0x97ffffff pref]
[ 0.204216] pci 0000:1c:03.1: BAR 16: assigned [mem 0x98000000-0x9bffffff]
[ 0.204218] pci 0000:1c:03.0: BAR 13: assigned [io 0x6000-0x60ff]
[ 0.204219] pci 0000:1c:03.0: BAR 14: assigned [io 0x6400-0x64ff]
[ 0.204221] pci 0000:1c:03.1: BAR 13: assigned [io 0x6800-0x68ff]
[ 0.204223] pci 0000:1c:03.1: BAR 14: assigned [io 0x6c00-0x6cff]
[ 0.204226] pci 0000:1c:03.0: CardBus bridge to [bus 1d]
[ 0.204228] pci 0000:1c:03.0: bridge window [io 0x6000-0x60ff]
[ 0.204232] pci 0000:1c:03.0: bridge window [io 0x6400-0x64ff]
[ 0.204236] pci 0000:1c:03.0: bridge window [mem 0x88000000-0x8bffffff pref]
[ 0.204240] pci 0000:1c:03.0: bridge window [mem 0x8c000000-0x8fffffff]
[ 0.204245] pci 0000:1c:03.1: CardBus bridge to [bus 21-24]
[ 0.204247] pci 0000:1c:03.1: bridge window [io 0x6800-0x68ff]
[ 0.204252] pci 0000:1c:03.1: bridge window [io 0x6c00-0x6cff]
[ 0.204256] pci 0000:1c:03.1: bridge window [mem 0x94000000-0x97ffffff pref]
[ 0.204261] pci 0000:1c:03.1: bridge window [mem 0x98000000-0x9bffffff]
[ 0.204265] pci 0000:00:1e.0: PCI bridge to [bus 1c-1d]
[ 0.204268] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
[ 0.204274] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.204284] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.204286] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.204287] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.204289] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.204290] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.204292] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.204293] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.204295] pci_bus 0000:00: resource 11 [mem 0x7e000000-0xfebfffff window]
[ 0.204296] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.204298] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdeffffff]
[ 0.204299] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.204301] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.204303] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[ 0.204304] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.204306] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.204307] pci_bus 0000:08: resource 1 [mem 0x80400000-0x805fffff]
[ 0.204309] pci_bus 0000:08: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.204310] pci_bus 0000:14: resource 0 [io 0x5000-0x5fff]
[ 0.204312] pci_bus 0000:14: resource 1 [mem 0xfe000000-0xfe0fffff]
[ 0.204313] pci_bus 0000:14: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.204315] pci_bus 0000:1c: resource 0 [io 0x6000-0x6fff]
[ 0.204316] pci_bus 0000:1c: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.204318] pci_bus 0000:1c: resource 4 [io 0x0000-0x0cf7 window]
[ 0.204319] pci_bus 0000:1c: resource 5 [io 0x0d00-0xffff window]
[ 0.204321] pci_bus 0000:1c: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.204322] pci_bus 0000:1c: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.204324] pci_bus 0000:1c: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.204325] pci_bus 0000:1c: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.204327] pci_bus 0000:1c: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.204328] pci_bus 0000:1c: resource 11 [mem 0x7e000000-0xfebfffff window]
[ 0.204330] pci_bus 0000:1d: resource 0 [io 0x6000-0x60ff]
[ 0.204331] pci_bus 0000:1d: resource 1 [io 0x6400-0x64ff]
[ 0.204333] pci_bus 0000:1d: resource 2 [mem 0x88000000-0x8bffffff pref]
[ 0.204334] pci_bus 0000:1d: resource 3 [mem 0x8c000000-0x8fffffff]
[ 0.204336] pci_bus 0000:21: resource 0 [io 0x6800-0x68ff]
[ 0.204337] pci_bus 0000:21: resource 1 [io 0x6c00-0x6cff]
[ 0.204339] pci_bus 0000:21: resource 2 [mem 0x94000000-0x97ffffff pref]
[ 0.204340] pci_bus 0000:21: resource 3 [mem 0x98000000-0x9bffffff]
[ 0.204485] NET: Registered protocol family 2
[ 0.204696] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.204751] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.204861] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.204899] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.204975] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.204994] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.205104] NET: Registered protocol family 1
[ 0.205110] NET: Registered protocol family 44
[ 0.207494] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.207521] PCI: CLS 64 bytes, default 64
[ 0.207587] Trying to unpack rootfs image as initramfs...
[ 0.766149] Freeing initrd memory: 87864K
[ 0.766512] check: Scanning for low memory corruption every 60 seconds
[ 0.767094] Initialise system trusted keyrings
[ 0.767110] Key type blacklist registered
[ 0.767202] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[ 0.769405] zbud: loaded
[ 0.769967] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.770216] fuse: init (API version 7.31)
[ 0.770244] *** VALIDATE fuse ***
[ 0.770247] *** VALIDATE fuse ***
[ 0.770392] Platform Keyring initialized
[ 0.777060] Key type asymmetric registered
[ 0.777062] Asymmetric key parser 'x509' registered
[ 0.777082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.777146] io scheduler mq-deadline registered
[ 0.777687] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.777958] pcieport 0000:00:1c.1: enabling device (0100 -> 0103)
[ 0.778529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.778614] intel_idle: does not run on family 6 model 23
[ 0.778841] ACPI: AC Adapter [AC] (on-line)
[ 0.778921] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.778970] ACPI: Lid Switch [LID]
[ 0.779013] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.779036] ACPI: Power Button [PWRB]
[ 0.779077] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.779103] ACPI: Sleep Button [SLPB]
[ 0.779145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.779178] ACPI: Power Button [PWRF]
[ 0.779361] Monitor-Mwait will be used to enter C-1 state
[ 0.779366] Monitor-Mwait will be used to enter C-2 state
[ 0.779369] Monitor-Mwait will be used to enter C-3 state
[ 0.779372] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.779461] clocksource: Switched to clocksource hpet
[ 0.780194] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.780195] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.780515] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.780517] ACPI: Thermal Zone [TZ01] (27 C)
[ 0.781139] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.802418] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.802589] serial 00:06: skipping CIR port at 0x2e8 / 0x0, IRQ 3
[ 0.807836] Linux agpgart interface v0.103
[ 0.813300] battery: ACPI: Battery Slot [CMB1] (battery present)
[ 0.813384] battery: ACPI: Battery Slot [CMB2] (battery absent)
[ 0.813583] loop: module loaded
[ 0.813841] ata_piix 0000:00:1f.1: version 2.13
[ 0.814783] scsi host0: ata_piix
[ 0.815018] scsi host1: ata_piix
[ 0.815078] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
[ 0.815080] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
[ 0.815346] libphy: Fixed MDIO Bus: probed
[ 0.815347] tun: Universal TUN/TAP device driver, 1.6
[ 0.815417] PPP generic driver version 2.4.2
[ 0.815545] VFIO - User Level meta-driver version: 0.3
[ 0.815639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.815649] ehci-pci: EHCI PCI platform driver
[ 0.815883] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.815890] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.815904] ehci-pci 0000:00:1a.7: debug port 1
[ 0.819832] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.819849] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfe426c00
[ 0.832074] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.832290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.832292] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.832294] usb usb1: Product: EHCI Host Controller
[ 0.832295] usb usb1: Manufacturer: Linux 5.4.0-26-generic ehci_hcd
[ 0.832297] usb usb1: SerialNumber: ...
[ 0.832472] hub 1-0:1.0: USB hub found
[ 0.832491] hub 1-0:1.0: 4 ports detected
[ 0.832928] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.832933] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.832945] ehci-pci 0000:00:1d.7: debug port 1
[ 0.836860] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.836865] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe427000
[ 0.856092] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.856136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.856138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.856140] usb usb2: Product: EHCI Host Controller
[ 0.856141] usb usb2: Manufacturer: Linux 5.4.0-26-generic ehci_hcd
[ 0.856142] usb usb2: SerialNumber: ...
[ 0.856316] hub 2-0:1.0: USB hub found
[ 0.856324] hub 2-0:1.0: 6 ports detected
[ 0.856569] ehci-platform: EHCI generic platform driver
[ 0.856588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856591] ohci-pci: OHCI PCI platform driver
[ 0.856603] ohci-platform: OHCI generic platform driver
[ 0.856611] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.856804] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.856809] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.856817] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.856847] uhci_hcd 0000:00:1a.0: irq 22, io base 0x00001860
[ 0.856899] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.856901] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.856903] usb usb3: Product: UHCI Host Controller
[ 0.856904] usb usb3: Manufacturer: Linux 5.4.0-26-generic uhci_hcd
[ 0.856905] usb usb3: SerialNumber: ...
[ 0.857063] hub 3-0:1.0: USB hub found
[ 0.857071] hub 3-0:1.0: 2 ports detected
[ 0.857373] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.857378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.857385] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.857405] uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001880
[ 0.857459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.857461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.857462] usb usb4: Product: UHCI Host Controller
[ 0.857464] usb usb4: Manufacturer: Linux 5.4.0-26-generic uhci_hcd
[ 0.857465] usb usb4: SerialNumber: ...
[ 0.857616] hub 4-0:1.0: USB hub found
[ 0.857623] hub 4-0:1.0: 2 ports detected
[ 0.857928] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.857933] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.857939] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.857960] uhci_hcd 0000:00:1d.0: irq 22, io base 0x000018a0
[ 0.858016] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.858018] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.858019] usb usb5: Product: UHCI Host Controller
[ 0.858021] usb usb5: Manufacturer: Linux 5.4.0-26-generic uhci_hcd
[ 0.858022] usb usb5: SerialNumber: ...
[ 0.858172] hub 5-0:1.0: USB hub found
[ 0.858179] hub 5-0:1.0: 2 ports detected
[ 0.858488] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.858493] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.858500] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.858519] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0
[ 0.858583] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.858585] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.858586] usb usb6: Product: UHCI Host Controller
[ 0.858588] usb usb6: Manufacturer: Linux 5.4.0-26-generic uhci_hcd
[ 0.858589] usb usb6: SerialNumber: ...
[ 0.858735] hub 6-0:1.0: USB hub found
[ 0.858742] hub 6-0:1.0: 2 ports detected
[ 0.859036] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.859041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.859048] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.859072] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018e0
[ 0.859122] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.859124] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.859125] usb usb7: Product: UHCI Host Controller
[ 0.859127] usb usb7: Manufacturer: Linux 5.4.0-26-generic uhci_hcd
[ 0.859128] usb usb7: SerialNumber: ...
[ 0.859269] hub 7-0:1.0: USB hub found
[ 0.859277] hub 7-0:1.0: 2 ports detected
[ 0.859479] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.861681] i8042: Detected active multiplexing controller, rev 1.1
[ 0.863097] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.863102] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.863134] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.863161] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.863188] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.863368] mousedev: PS/2 mouse device common for all mice
[ 0.863716] rtc_cmos 00:04: RTC can wake from S4
[ 0.863982] rtc_cmos 00:04: registered as rtc0
[ 0.864002] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.864019] i2c /dev entries driver
[ 0.864086] device-mapper: uevent: version 1.0.3
[ 0.864198] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX
[ 0.864224] platform eisa.0: Probing EISA bus 0
[ 0.864226] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.864228] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.864229] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.864231] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.864232] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.864234] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.864235] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.864237] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.864238] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.864240] platform eisa.0: EISA: Detected 0 cards
[ 0.864244] intel_pstate: CPU model not supported
[ 0.864301] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.864406] drop_monitor: Initializing network drop monitor service
[ 0.864634] NET: Registered protocol family 10
[ 0.877103] Segment Routing with IPv6
[ 0.877140] NET: Registered protocol family 17
[ 0.877217] Key type dns_resolver registered
[ 0.877478] RAS: Correctable Errors collector initialized.
[ 0.877529] microcode: sig=0x10676, pf=0x80, revision=0x60f
[ 0.877591] microcode: Microcode Update Driver: v2.2.
[ 0.877596] IPI shorthand broadcast: enabled
[ 0.877680] registered taskstats version 1
[ 0.877693] Loading compiled-in X.509 certificates
[ 0.880989] Loaded X.509 cert 'Build time autogenerated kernel key: b559075f1a2deb8232ccd540ea3b0eb9fdd57b46'
[ 0.881044] zswap: loaded using pool lzo/zbud
[ 0.881188] Key type ._fscrypt registered
[ 0.881189] Key type .fscrypt registered
[ 0.892722] Key type big_key registered
[ 0.893709] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.899036] Key type encrypted registered
[ 0.899043] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.899053] ima: No TPM chip found, activating TPM-bypass!
[ 0.899062] ima: Allocated hash algorithm: sha1
[ 0.899072] ima: No architecture policies found
[ 0.899089] evm: Initialising EVM extended attributes:
[ 0.899090] evm: security.selinux
[ 0.899091] evm: security.SMACK64
[ 0.899092] evm: security.SMACK64EXEC
[ 0.899092] evm: security.SMACK64TRANSMUTE
[ 0.899093] evm: security.SMACK64MMAP
[ 0.899094] evm: security.apparmor
[ 0.899094] evm: security.ima
[ 0.899095] evm: security.capability
[ 0.899096] evm: HMAC attrs: 0x1
[ 0.899615] PM: Magic number: 4:513:854
[ 0.899793] rtc_cmos 00:04: setting system clock to 2020-05-20T21:50:57 UTC (1590011457)
[ 0.900612] Unstable clock detected, switching default tracing clock to "global"
[ 0.900612] If you want to keep using the local clock, then add:
[ 0.900612] "trace_clock=local"
[ 0.900612] on the kernel command line
[ 0.983800] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 0.992038] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 1.053977] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.053979] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.054272] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.054415] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.056529] Freeing unused decrypted memory: 2040K
[ 1.057994] Freeing unused kernel image memory: 2712K
[ 1.068107] Write protecting the kernel read-only data: 22528k
[ 1.069597] Freeing unused kernel image memory: 2008K
[ 1.070341] Freeing unused kernel image memory: 1196K
[ 1.084536] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.084568] x86/mm: Checking user space page tables
[ 1.098587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.098594] Run /init as init process
[ 1.192037] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.226572] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.227411] usb 2-1: New USB device found, idVendor=05dc, idProduct=a838, bcdDevice=11.00
[ 1.227414] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.227415] usb 2-1: Product: USB Flash Drive
[ 1.227417] usb 2-1: Manufacturer: Lexar
[ 1.227418] usb 2-1: SerialNumber: ...
[ 1.228739] acpi device:03: registered as cooling_device2
[ 1.228814] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
[ 1.255863] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.255865] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.256245] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.280613] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPCB.PMIO) (20190816/utaddress-204)
[ 1.280621] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.280625] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20190816/utaddress-204)
[ 1.280629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.280630] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20190816/utaddress-204)
[ 1.280634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.280634] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.280953] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.282109] sdhci: Secure Digital Host Controller Interface driver
[ 1.282110] sdhci: Copyright(c) Pierre Ossman
[ 1.284270] ahci 0000:00:1f.2: version 3.0
[ 1.284621] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.284624] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.295624] sdhci-pci 0000:1c:03.2: SDHCI controller found [1217:7120] (rev 2)
[ 1.296050] scsi host2: ahci
[ 1.300795] scsi host3: ahci
[ 1.305804] scsi host4: ahci
[ 1.305904] ata3: SATA max UDMA/133 abar m2048@0xfe426000 port 0xfe426100 irq 29
[ 1.305907] ata4: SATA max UDMA/133 abar m2048@0xfe426000 port 0xfe426180 irq 29
[ 1.305909] ata5: SATA max UDMA/133 abar m2048@0xfe426000 port 0xfe426200 irq 29
[ 1.307834] mmc0: SDHCI controller on PCI [0000:1c:03.2] using PIO
[ 1.364212] firewire_ohci 0000:1c:03.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[ 1.372066] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 1.383082] random: fast init done
[ 1.399919] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.399934] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.400067] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.496063] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 1.566267] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX
[ 1.566270] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.566299] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[ 1.567470] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.570096] usb 3-2: New USB device found, idVendor=0c24, idProduct=000f, bcdDevice=19.15
[ 1.570100] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=...
[ 1.619161] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.619183] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.619208] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.619733] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out
[ 1.619735] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out
[ 1.696100] usb 5-2: New USB device found, idVendor=413c, idProduct=3012, bcdDevice=43.01
[ 1.696102] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.696104] usb 5-2: Product: Dell USB Optical Mouse
[ 1.696105] usb 5-2: Manufacturer: Dell
[ 1.703993] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.719331] usbcore: registered new interface driver usbhid
[ 1.719332] usbhid: USB HID core driver
[ 1.722332] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:413C:3012.0001/input/input14
[ 1.722576] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.896172] firewire_core 0000:1c:03.4: created device fw0: GUID 00000e10034521c6, S400
[ 1.911252] ata3.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 1.911254] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.912144] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out
[ 1.912147] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out
[ 1.912423] ata3.00: configured for UDMA/133
[ 1.912638] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 1A01 PQ: 0 ANSI: 5
[ 1.913130] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.913150] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.913170] sd 2:0:0:0: [sda] Write Protect is off
[ 1.913172] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.913225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.964581] sda: sda1 sda2 < sda5 sda6 >
[ 1.965276] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.034515] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04791/0x302000/0x0/0x0, board id: 0, fw id: 496506
[ 2.034520] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 2.071859] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 2.144668] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.144978] scsi host5: usb-storage 2-1:1.0
[ 2.145122] usbcore: registered new interface driver usb-storage
[ 2.146798] usbcore: registered new interface driver uas
[ 3.312980] scsi 5:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
[ 3.313295] scsi 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.314707] sd 5:0:0:0: [sdb] 31285248 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.315672] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.315675] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.316685] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.342613] sdb: sdb1
[ 3.346465] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 3.798012] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input15
[ 3.980606] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.153914] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.966934] random: crng init done
[ 4.966937] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.252043] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 5.427105] usb 4-1: New USB device found, idVendor=1199, idProduct=6832, bcdDevice= 0.02
[ 5.427110] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.427113] usb 4-1: Product: Mini Card
[ 5.427117] usb 4-1: Manufacturer: Sierra Wireless, Incorporated
[ 123.140118] Adding 3998716k swap on /dev/sda5. Priority:-2 extents:1 across:3998716k FS
[ 128.137982] systemd[1]: Inserted module 'autofs4'
[ 128.164411] systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 128.184144] systemd[1]: Detected architecture x86-64.
[ 128.200611] systemd[1]: Set hostname to ...
[ 128.200802] systemd[1]: Initializing machine ID from random generator.
[ 128.403143] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 128.474984] systemd[1]: cdrom.mount: Unit is bound to inactive unit dev-sdb1.device. Stopping, too.
[ 128.478049] systemd[1]: Created slice system-modprobe.slice.
[ 128.478392] systemd[1]: Created slice User and Session Slice.
[ 128.478494] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 128.478781] systemd[1]: Set up automount ...
[ 128.478841] systemd[1]: Reached target User and Group Name Lookups.
[ 128.478872] systemd[1]: Reached target Remote File Systems.
[ 128.478903] systemd[1]: Reached target Slices.
[ 128.478937] systemd[1]: Reached target Swap.
[ 128.479064] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 128.479571] systemd[1]: Listening on LVM2 poll daemon socket.
[ 128.479834] systemd[1]: Listening on Syslog Socket.
[ 128.479922] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 128.480451] systemd[1]: Listening on Journal Audit Socket.
[ 128.480587] systemd[1]: Listening on Journal Socket (/dev/log).
[ 128.480760] systemd[1]: Listening on udev Control Socket.
[ 128.480883] systemd[1]: Listening on udev Kernel Socket.
[ 128.482033] systemd[1]: Unmounting /cdrom...
[ 128.482995] systemd[1046]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory
[ 128.491241] systemd[1]: cdrom.mount: Mount process exited, code=exited, status=32/n/a
[ 128.491262] systemd[1]: Failed unmounting /cdrom.
[ 128.491756] systemd[1]: Listening on Journal Socket.
[ 128.493354] systemd[1]: Mounting Huge Pages File System...
[ 128.494873] systemd[1]: Mounting POSIX Message Queue File System...
[ 128.496848] systemd[1]: Mounting Kernel Debug File System...
[ 128.499554] systemd[1]: Mounting Kernel Trace File System...
[ 128.502414] systemd[1]: Starting Journal Service...
[ 128.505110] systemd[1]: Starting Availability of block devices...
[ 128.515508] systemd[1]: Starting Set the console keyboard layout...
[ 128.517589] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 128.519043] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 128.519145] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 128.537641] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 128.540080] systemd[1]: Starting Load Kernel Modules...
[ 128.543870] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 128.550529] systemd[1]: Starting udev Coldplug all Devices...
[ 128.563495] systemd[1]: Starting Uncomplicated firewall...
[ 128.566853] systemd[1]: Mounted Huge Pages File System.
[ 128.567270] systemd[1]: Mounted POSIX Message Queue File System.
[ 128.567583] systemd[1]: Mounted Kernel Debug File System.
[ 128.567812] systemd[1]: Mounted Kernel Trace File System.
[ 128.568655] systemd[1]: Finished Availability of block devices.
[ 128.569621] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 128.606825] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 128.610244] systemd[1]: Finished Uncomplicated firewall.
[ 128.611598] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 128.611664] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 128.615393] systemd[1]: Starting Create System Users...
[ 128.627488] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 128.694076] lp: driver loaded but no devices found
[ 128.695767] systemd[1]: Finished Create System Users.
[ 128.697490] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 128.722622] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 128.725912] systemd[1]: Starting udev Kernel Device Manager...
[ 128.746481] ppdev: user-space parallel port driver
[ 128.750146] parport_pc 00:07: reported by Plug and Play ACPI
[ 128.750219] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 128.844224] lp0: using parport0 (interrupt-driven).
[ 128.853852] systemd[1]: Finished Load Kernel Modules.
[ 128.855936] systemd[1]: Mounting FUSE Control File System...
[ 128.858097] systemd[1]: Mounting Kernel Configuration File System...
[ 128.881091] systemd[1]: Starting Apply Kernel Variables...
[ 128.882750] systemd[1]: Mounted Kernel Configuration File System.
[ 128.896691] systemd[1]: Finished Set the console keyboard layout.
[ 128.897116] systemd[1]: Mounted FUSE Control File System.
[ 128.897448] systemd[1]: Reached target Local File Systems (Pre).
[ 128.897552] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 128.906832] systemd[1]: Mounting /tmp...
[ 128.920923] systemd[1]: Finished udev Coldplug all Devices.
[ 128.923050] systemd[1]: Finished Apply Kernel Variables.
[ 128.923423] systemd[1]: Mounted /tmp.
[ 128.932287] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 128.940253] systemd[1]: Started udev Kernel Device Manager.
[ 128.941956] systemd[1]: Starting Show Plymouth Boot Screen...
[ 128.976319] systemd[1]: plymouth-start.service: Succeeded.
[ 128.976969] systemd[1]: Started Show Plymouth Boot Screen.
[ 128.977266] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 128.977468] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 128.977514] systemd[1]: Reached target Local Encrypted Volumes.
[ 129.489454] systemd[1]: Started Journal Service.
[ 129.503513] systemd-journald[1051]: Received client request to flush runtime journal.
[ 129.986168] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
[ 129.986713] ACPI: \_SB_.FEXT: BTNI: [0xf0101]
[ 129.986773] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input16
[ 129.998042] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 130.254011] yenta_cardbus 0000:1c:03.0: CardBus bridge found [10cf:143d]
[ 130.254035] yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[ 130.271213] usbcore: registered new interface driver usbserial_generic
[ 130.271225] usbserial: USB Serial support registered for generic
[ 130.285684] usbcore: registered new interface driver sierra
[ 130.285698] usbserial: USB Serial support registered for Sierra USB modem
[ 130.285731] sierra 4-1:1.0: Sierra USB modem converter detected
[ 130.292091] usb 4-1: Sierra USB modem converter now attached to ttyUSB0
[ 130.292182] usb 4-1: Sierra USB modem converter now attached to ttyUSB1
[ 130.292254] usb 4-1: Sierra USB modem converter now attached to ttyUSB2
[ 130.308188] Bluetooth: Core ver 2.22
[ 130.308218] NET: Registered protocol family 31
[ 130.308219] Bluetooth: HCI device and connection manager initialized
[ 130.308226] Bluetooth: HCI socket layer initialized
[ 130.308229] Bluetooth: L2CAP socket layer initialized
[ 130.308234] Bluetooth: SCO socket layer initialized
[ 130.348073] usbcore: registered new interface driver btusb
[ 130.348791] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 130.351978] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 130.366980] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 130.388901] yenta_cardbus 0000:1c:03.0: ISA IRQ mask 0x0c38, PCI irq 16
[ 130.388906] yenta_cardbus 0000:1c:03.0: Socket status: 30000006
[ 130.388924] yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 130.388926] yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge window: [mem 0xfe100000-0xfe1fffff]
[ 130.388929] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfe100000-0xfe1fffff:
[ 130.388932] excluding 0xfe100000-0xfe10ffff
[ 130.399640] yenta_cardbus 0000:1c:03.1: enabling device (0080 -> 0083)
[ 130.399756] yenta_cardbus 0000:1c:03.1: CardBus bridge found [10cf:143d]
[ 130.533149] yenta_cardbus 0000:1c:03.1: ISA IRQ mask 0x0c38, PCI irq 16
[ 130.533153] yenta_cardbus 0000:1c:03.1: Socket status: 30000410
[ 130.533157] pci_bus 0000:1c: Raising subordinate bus# of parent bus (#1c) from #1d to #24
[ 130.533171] yenta_cardbus 0000:1c:03.1: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 130.533174] yenta_cardbus 0000:1c:03.1: pcmcia: parent PCI bridge window: [mem 0xfe100000-0xfe1fffff]
[ 130.533176] pcmcia_socket pcmcia_socket1: cs: memory probe 0xfe100000-0xfe1fffff:
[ 130.533180] excluding 0xfe100000-0xfe10ffff
[ 130.626013] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 130.626016] iwl4965: Copyright(c) BDC6-FA10 Intel Corporation
[ 130.626103] iwl4965 0000:14:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 130.635838] iwl4965 0000:14:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 130.674210] iwl4965 0000:14:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 130.711489] iwl4965 0000:14:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 130.727696] iwl4965 0000:14:00.0: loaded firmware version XXX.XXX.XXX.XXX
[ 130.728236] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 130.747885] kvm: disabled by bios
[ 130.782131] kvm: disabled by bios
[ 130.814417] intel_powerclamp: No package C-state available
[ 130.845351] intel_powerclamp: No package C-state available
[ 131.103197] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 131.103201] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 131.103203] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 131.103204] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 131.103206] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 131.103208] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 131.103209] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x1a
[ 131.103211] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 131.144031] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 131.144109] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 131.144178] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 131.144242] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 131.303848] iwl4965 0000:14:00.0 wlp20s0: renamed from wlan0
[ 131.321689] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 131.321697] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 131.321726] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 131.321740] clean
[ 131.321762] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 131.321772] excluding 0x60000000-0x60ffffff
[ 131.480081] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 131.480091] pcmcia_socket pcmcia_socket1: cs: memory probe 0xfe110000-0xfe1fffff:
[ 131.480583] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 131.480588] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 131.480661] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 131.480674] clean
[ 131.480749] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 131.480758] excluding 0x60000000-0x60ffffff
[ 131.512709] excluding 0xfe1fe000-0xfe20bfff
[ 131.513432] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 16)
[ 132.221159] zlua: loading out-of-tree module taints kernel.
[ 132.221163] zlua: module license 'MIT' taints kernel.
[ 132.221163] Disabling lock debugging due to kernel taint
[ 134.007947] ZFS: Loaded module v0.8.3-1ubuntu12, ZFS pool version 5000, ZFS filesystem version 5
[ 135.939274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 135.939277] Bluetooth: BNEP filters: protocol multicast
[ 135.939283] Bluetooth: BNEP socket layer initialized
[ 149.457328] Bluetooth: RFCOMM TTY layer initialized
[ 149.457337] Bluetooth: RFCOMM socket layer initialized
[ 149.457346] Bluetooth: RFCOMM ver 1.11
[ 150.029781] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
[ 161.073004] rfkill: input handler disabled
[ 188.356221] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 233.262298] perf: interrupt took too long (3135 > 3132), lowering kernel.perf_event_max_sample_rate to 63750
[ 368.757850] perf: interrupt took too long (3922 > 3918), lowering kernel.perf_event_max_sample_rate to 50750
[ 840.777073] wlp20s0: authenticate with XX:XX:XX:XX:XX:XX
[ 840.797670] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 840.804128] wlp20s0: authenticated
[ 840.808288] wlp20s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 840.815942] wlp20s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1)
[ 840.848220] wlp20s0: associated
[ 841.120395] wlp20s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 844.858686] wlp20s0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2=PREV_AUTH_NOT_VALID)
[ 853.137892] wlp20s0: authenticate with XX:XX:XX:XX:XX:XX
[ 853.147021] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 853.150722] wlp20s0: authenticated
[ 853.156097] wlp20s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 853.163818] wlp20s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1511 status=0 aid=1)
[ 853.189312] wlp20s0: associated
[ 853.244742] wlp20s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 857.203206] wlp20s0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2=PREV_AUTH_NOT_VALID)
[ 873.820866] wlp20s0: authenticate with XX:XX:XX:XX:XX:XX
[ 873.829824] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 873.834397] wlp20s0: authenticated
[ 873.840050] wlp20s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 873.844540] wlp20s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1511 status=0 aid=1)
[ 873.870536] wlp20s0: associated
[ 873.930051] wlp20s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 877.886818] wlp20s0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2=PREV_AUTH_NOT_VALID)
[ 896.064405] wlp20s0: authenticate with XX:XX:XX:XX:XX:XX
[ 896.084872] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 896.090906] wlp20s0: authenticated
[ 896.092457] wlp20s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 896.102856] wlp20s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1)
[ 896.131299] wlp20s0: associated
[ 896.131352] wlp20s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 900.145743] wlp20s0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2=PREV_AUTH_NOT_VALID)
[ 944.343139] wlp20s0: authenticate with XX:XX:XX:XX:XX:XX
[ 944.352340] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
[ 944.354447] wlp20s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
[ 944.438446] wlp20s0: authenticated
[ 944.440077] wlp20s0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
[ 944.444805] wlp20s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1511 status=0 aid=1)
[ 944.470294] wlp20s0: associated
[ 944.485184] wlp20s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX
[ 945.566769] IPv6: ADDRCONF(NETDEV_CHANGE): wlp20s0: link becomes ready
[ 945.567383] iwl4965 0000:14:00.0: Enabling power save might cause firmware crashes
[ 989.474985] perf: interrupt took too long (4909 > 4902), lowering kernel.perf_event_max_sample_rate to 40500