Probe #5fb1e739a2 of Lenovo ThinkPad R61 8933W6M

Log: dmesg

[ 0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02 [ 0.000000] Linux version 5.3.0-46-generic (XXX@XXX) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #38~18.04.1-Ubuntu SMP Tue Mar 31 04:17:56 UTC 2020 (Ubuntu 5.3.0-46.38~18.04.1-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=/dev/mapper/XXXXXXXXXXXXXXX ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6affff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6b0000-0x000000007f6cbfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f6cc000-0x000000007f6fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LENOVO 8933W6M/8933W6M, BIOS 7OETB5WW (2.15 ) 05/08/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.560 MHz processor [ 0.015553] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.015556] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015563] last_pfn = 0x7f6b0 max_arch_pfn = 0x400000000 [ 0.015570] MTRR default type: uncachable [ 0.015571] MTRR fixed ranges enabled: [ 0.015573] 00000-9FFFF write-back [ 0.015574] A0000-BFFFF uncachable [ 0.015575] C0000-CFFFF write-protect [ 0.015577] D0000-DFFFF uncachable [ 0.015578] E0000-FFFFF write-protect [ 0.015579] MTRR variable ranges enabled: [ 0.015581] 0 base 000000000 mask F80000000 write-back [ 0.015583] 1 base 07F700000 mask FFFF00000 uncachable [ 0.015584] 2 base 07F800000 mask FFF800000 uncachable [ 0.015585] 3 disabled [ 0.015586] 4 disabled [ 0.015587] 5 disabled [ 0.015588] 6 disabled [ 0.015589] 7 disabled [ 0.016290] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.016419] total RAM covered: 2039M [ 0.016810] Found optimal setting for mtrr clean up [ 0.016812] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.026502] found SMP MP-table at [mem 0x000f6a00-0x000f6a0f] [ 0.033184] check: Scanning 1 areas for low memory corruption [ 0.033192] BRK [0x0ae01000, 0x0ae01fff] PGTABLE [ 0.033194] BRK [0x0ae02000, 0x0ae02fff] PGTABLE [ 0.033196] BRK [0x0ae03000, 0x0ae03fff] PGTABLE [ 0.033237] BRK [0x0ae04000, 0x0ae04fff] PGTABLE [ 0.033240] BRK [0x0ae05000, 0x0ae05fff] PGTABLE [ 0.033377] BRK [0x0ae06000, 0x0ae06fff] PGTABLE [ 0.033421] RAMDISK: [mem 0x32ce5000-0x35669fff] [ 0.033434] ACPI: Early table checksum verification disabled [ 0.033439] ACPI: RSDP 0x00000000000F69D0 000024 (v02 LENOVO) [ 0.033444] ACPI: XSDT 0x000000007F6BC828 00008C (v01 LENOVO TP-7O 00002150 LTP 00000000) [ 0.033453] ACPI: FACP 0x000000007F6BC900 0000F4 (v03 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033459] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20190703/tbfadt-569) [ 0.033463] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20190703/tbfadt-624) [ 0.033469] ACPI: DSDT 0x000000007F6BCD1D 00EEA2 (v01 LENOVO TP-7O 00002150 MSFT 03000000) [ 0.033474] ACPI: FACS 0x000000007F6E4000 000040 [ 0.033478] ACPI: FACS 0x000000007F6E4000 000040 [ 0.033482] ACPI: SSDT 0x000000007F6BCAB4 000269 (v01 LENOVO TP-7O 00002150 MSFT 03000000) [ 0.033487] ACPI: ECDT 0x000000007F6CBBBF 000052 (v01 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033492] ACPI: TCPA 0x000000007F6CBC11 000032 (v02 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033496] ACPI: APIC 0x000000007F6CBC43 000068 (v01 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033501] ACPI: MCFG 0x000000007F6CBCAB 00003C (v01 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033506] ACPI: HPET 0x000000007F6CBCE7 000038 (v01 LENOVO TP-7O 00002150 LNVO 00000001) [ 0.033510] ACPI: SLIC 0x000000007F6CBE62 000176 (v01 LENOVO TP-7O 00002150 LTP 00000000) [ 0.033515] ACPI: BOOT 0x000000007F6CBFD8 000028 (v01 LENOVO TP-7O 00002150 LTP 00000001) [ 0.033519] ACPI: SSDT 0x000000007F6E2697 00025F (v01 LENOVO TP-7O 00002150 INTL 20050513) [ 0.033524] ACPI: SSDT 0x000000007F6E28F6 0000A6 (v01 LENOVO TP-7O 00002150 INTL 20050513) [ 0.033529] ACPI: SSDT 0x000000007F6E299C 0004F7 (v01 LENOVO TP-7O 00002150 INTL 20050513) [ 0.033534] ACPI: SSDT 0x000000007F6E2E93 0001D8 (v01 LENOVO TP-7O 00002150 INTL 20050513) [ 0.033548] ACPI: Local APIC address 0xfee00000 [ 0.033674] No NUMA configuration found [ 0.033676] Faking a node at [mem 0x0000000000000000-0x000000007f6affff] [ 0.033691] NODE_DATA(0) allocated [mem 0x7f685000-0x7f6affff] [ 0.034075] Zone ranges: [ 0.034076] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.034078] DMA32 [mem 0x0000000001000000-0x000000007f6affff] [ 0.034080] Normal empty [ 0.034081] Device empty [ 0.034082] Movable zone start for each node [ 0.034087] Early memory node ranges [ 0.034088] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.034089] node 0: [mem 0x0000000000100000-0x000000007f6affff] [ 0.034130] Zeroed struct page in unavailable ranges: 2484 pages [ 0.034132] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6affff] [ 0.034134] On node 0 totalpages: 521804 [ 0.034135] DMA zone: 64 pages used for memmap [ 0.034136] DMA zone: 21 pages reserved [ 0.034138] DMA zone: 3996 pages, LIFO batch:0 [ 0.034227] DMA32 zone: 8091 pages used for memmap [ 0.034228] DMA32 zone: 517808 pages, LIFO batch:63 [ 0.050535] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff] [ 0.051048] ACPI: PM-Timer IO Port: 0x1008 [ 0.051050] ACPI: Local APIC address 0xfee00000 [ 0.051064] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.051066] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.051081] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.051085] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.051087] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.051089] ACPI: IRQ0 used by override. [ 0.051091] ACPI: IRQ9 used by override. [ 0.051094] Using ACPI (MADT) for SMP configuration information [ 0.051097] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.051106] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.051131] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.051133] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.051134] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.051135] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.051136] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] [ 0.051137] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff] [ 0.051138] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.051141] [mem 0x80000000-0xefffffff] available for PCI devices [ 0.051143] Booting paravirtualized kernel on bare hardware [ 0.051148] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.051159] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.052230] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576 [ 0.052241] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152 [ 0.052242] pcpu-alloc: [0] 0 1 [ 0.052293] Built 1 zonelists, mobility grouping on. Total pages: 513628 [ 0.052294] Policy zone: DMA32 [ 0.052298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=/dev/mapper/XXXXXXXXXXXXXXX ro quiet splash vt.handoff=1 [ 0.053279] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.053742] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.053805] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.053811] Calgary: detecting Calgary via BIOS EBDA area [ 0.053812] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.073158] Memory: 1973760K/2087216K available (14339K kernel code, 2369K rwdata, 4664K rodata, 2660K init, 5076K bss, 113456K reserved, 0K cma-reserved) [ 0.073171] random: get_random_u64 called from __kmem_cache_create+0x41/0x540 with crng_init=0 [ 0.073442] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.073470] Kernel/User page tables isolation: enabled [ 0.073502] ftrace: allocating 43282 entries in 170 pages [ 0.101320] rcu: Hierarchical RCU implementation. [ 0.101323] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.101325] Tasks RCU enabled. [ 0.101326] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.101327] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.106423] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.106723] vt handoff: transparent VT on vt#1 [ 0.106736] Console: colour dummy device 80x25 [ 0.106742] printk: console [tty0] enabled [ 0.106773] ACPI: Core revision 20190703 [ 0.106938] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.106958] APIC: Switch to symmetric I/O mode setup [ 0.107409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.126958] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e1c75eb8d, max_idle_ns: 440795252744 ns [ 0.126964] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.12 BogoMIPS (lpj=7182240) [ 0.126967] pid_max: default: 32768 minimum: 301 [ 0.127019] LSM: Security Framework initializing [ 0.127037] Yama: becoming mindful. [ 0.127079] AppArmor: AppArmor initialized [ 0.127140] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.127154] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.127413] *** VALIDATE proc *** [ 0.127499] *** VALIDATE cgroup1 *** [ 0.127501] *** VALIDATE cgroup2 *** [ 0.127567] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.127571] process: using mwait in idle threads [ 0.127575] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.127577] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.127580] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.127582] Spectre V2 : Mitigation: Full generic retpoline [ 0.127583] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.127584] Speculative Store Bypass: Vulnerable [ 0.127589] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.127786] Freeing SMP alternatives memory: 40K [ 0.241120] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz (family: 0x6, model: 0xf, stepping: 0xd) [ 0.241328] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.241336] core: PEBS disabled due to CPU errata [ 0.241338] ... version: 2 [ 0.241339] ... bit width: 40 [ 0.241340] ... generic registers: 2 [ 0.241341] ... value mask: 000000ffffffffff [ 0.241342] ... max period: 000000007fffffff [ 0.241343] ... fixed-purpose events: 3 [ 0.241344] ... event mask: 0000000700000003 [ 0.241410] rcu: Hierarchical SRCU implementation. [ 0.242861] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.242926] smp: Bringing up secondary CPUs ... [ 0.242960] x86: Booting SMP configuration: [ 0.242960] .... node #0, CPUs: #1 [ 0.242960] TSC synchronization [CPU#0 -> CPU#1]: [ 0.242960] Measured 385812 cycles TSC warp between CPUs, turning off TSC clock. [ 0.242960] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.243062] smp: Brought up 1 node, 2 CPUs [ 0.243062] smpboot: Max logical packages: 1 [ 0.243062] smpboot: Total of 2 processors activated (7182.24 BogoMIPS) [ 0.244457] devtmpfs: initialized [ 0.244457] x86/mm: Memory block size: 128MB [ 0.247006] PM: Registering ACPI NVS region [mem 0x7f6cc000-0x7f6fffff] (212992 bytes) [ 0.247106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.247106] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.247106] pinctrl core: initialized pinctrl subsystem [ 0.247280] PM: RTC time: 06:41:40, date: 2020-04-26 [ 0.247477] NET: Registered protocol family 16 [ 0.247642] EISA bus registered [ 0.247642] cpuidle: using governor ladder [ 0.247642] cpuidle: using governor menu [ 0.247642] Simple Boot Flag at 0x35 set to 0x1 [ 0.247642] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.247642] ACPI: bus type PCI registered [ 0.247642] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.247642] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.247642] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.247642] PCI: Using configuration type 1 for base access [ 0.251460] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.255137] ACPI: Added _OSI(Module Device) [ 0.255139] ACPI: Added _OSI(Processor Device) [ 0.255140] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.255142] ACPI: Added _OSI(Processor Aggregator Device) [ 0.255143] ACPI: Added _OSI(Linux-Dell-Video) [ 0.255145] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.255146] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.276432] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.277685] ACPI: EC: EC started [ 0.277686] ACPI: EC: interrupt blocked [ 0.279349] ACPI: \: Used as first EC [ 0.279352] ACPI: \: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.279353] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.279789] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.295922] ACPI: Dynamic OEM Table Load: [ 0.295931] ACPI: SSDT 0xFFFF9AE83CAE4800 000282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.297534] ACPI: Dynamic OEM Table Load: [ 0.297543] ACPI: SSDT 0xFFFF9AE83CAD9000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.299645] ACPI: Dynamic OEM Table Load: [ 0.299645] ACPI: SSDT 0xFFFF9AE83CB15C00 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.303053] ACPI: Dynamic OEM Table Load: [ 0.303060] ACPI: SSDT 0xFFFF9AE83C0CF540 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.304510] ACPI: Interpreter enabled [ 0.304541] ACPI: (supports S0 S3 S4 S5) [ 0.304543] ACPI: Using IOAPIC for interrupt routing [ 0.304587] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.305001] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.314871] ACPI: Power Resource [PUBS] (on) [ 0.315162] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.317523] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.327306] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.328166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.328409] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.328650] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.328891] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.329132] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.329373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.329614] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.329854] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.330032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.330040] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.330765] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.331588] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.331590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.331609] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.332041] PCI host bridge to bus 0000:00 [ 0.332045] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.332048] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.332050] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.332052] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.332054] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.332056] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.332058] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.332060] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.332063] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.332079] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.332253] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 0.332271] pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf80fffff 64bit] [ 0.332280] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.332287] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807] [ 0.332448] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 0.332464] pci 0000:00:02.1: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit] [ 0.332721] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.332840] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f] [ 0.333044] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.333155] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f] [ 0.333390] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.333439] pci 0000:00:1a.7: reg 0x10: [mem 0xf8504800-0xf8504bff] [ 0.333632] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.333814] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.333869] pci 0000:00:1b.0: reg 0x10: [mem 0xf8300000-0xf8303fff 64bit] [ 0.334073] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.334280] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.334595] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.334795] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.335112] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.335318] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.335635] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.335837] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 [ 0.336160] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.336366] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.336686] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.336890] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.337019] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f] [ 0.337221] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.337338] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f] [ 0.337547] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.337673] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf] [ 0.337911] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.337965] pci 0000:00:1d.7: reg 0x10: [mem 0xf8504c00-0xf8504fff] [ 0.338166] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.338339] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.338678] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.338863] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.338871] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.338878] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.338884] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.338890] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.339096] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.339135] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.339157] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.339181] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.339196] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.339220] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f] [ 0.339264] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.339266] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.339268] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.339270] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.339430] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.339488] pci 0000:00:1f.2: reg 0x10: [io 0x1c00-0x1c07] [ 0.339516] pci 0000:00:1f.2: reg 0x14: [io 0x18d4-0x18d7] [ 0.339535] pci 0000:00:1f.2: reg 0x18: [io 0x18d8-0x18df] [ 0.339552] pci 0000:00:1f.2: reg 0x1c: [io 0x18d0-0x18d3] [ 0.339578] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ff] [ 0.339600] pci 0000:00:1f.2: reg 0x24: [mem 0xf8504000-0xf85047ff] [ 0.339716] pci 0000:00:1f.2: PME# supported from D3hot [ 0.339884] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.339923] pci 0000:00:1f.3: reg 0x10: [mem 0xf8505000-0xf85050ff] [ 0.340006] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] [ 0.340306] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.340311] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.340321] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.340338] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf86fffff 64bit pref] [ 0.340460] pci 0000:03:00.0: [168c:1014] type 00 class 0x020000 [ 0.340510] pci 0000:03:00.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit] [ 0.340865] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.340871] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.340880] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.340897] pci 0000:00:1c.1: bridge window [mem 0xf8700000-0xf87fffff 64bit pref] [ 0.341099] pci 0000:04:00.0: [14e4:1693] type 00 class 0x020000 [ 0.341232] pci 0000:04:00.0: reg 0x10: [mem 0xf8200000-0xf820ffff 64bit] [ 0.341463] pci 0000:04:00.0: enabling Extended Tags [ 0.341801] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.342194] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.342205] pci 0000:00:1c.2: bridge window [mem 0xf8200000-0xf82fffff] [ 0.342347] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.342355] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.342362] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.342376] pci 0000:00:1c.3: bridge window [mem 0xd7d00000-0xd7dfffff 64bit pref] [ 0.342510] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.342515] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 0.342523] pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff] [ 0.342539] pci 0000:00:1c.4: bridge window [mem 0xd7a00000-0xd7afffff 64bit pref] [ 0.342593] pci_bus 0000:15: extended config space not accessible [ 0.342678] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 [ 0.342708] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via CardBus function) [ 0.342710] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller [ 0.342753] pci 0000:15:00.0: reg 0x10: [mem 0xd78ff000-0xd78fffff] [ 0.342828] pci 0000:15:00.0: supports D1 D2 [ 0.342830] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342954] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010 [ 0.343001] pci 0000:15:00.1: reg 0x10: [mem 0xd78fe800-0xd78fefff] [ 0.343202] pci 0000:15:00.1: supports D1 D2 [ 0.343205] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.343310] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 [ 0.343355] pci 0000:15:00.2: reg 0x10: [mem 0xd78fe400-0xd78fe4ff] [ 0.343551] pci 0000:15:00.2: supports D1 D2 [ 0.343553] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.343667] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000 [ 0.343711] pci 0000:15:00.4: reg 0x10: [mem 0xd78fdc00-0xd78fdcff] [ 0.343906] pci 0000:15:00.4: supports D1 D2 [ 0.343908] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.344016] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000 [ 0.344058] pci 0000:15:00.5: reg 0x10: [mem 0xd78fd800-0xd78fd8ff] [ 0.344259] pci 0000:15:00.5: supports D1 D2 [ 0.344261] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.344456] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.344465] pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] [ 0.344475] pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd78fffff] [ 0.344485] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.344488] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.344490] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.344492] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.344494] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.344497] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.344499] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.344501] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.344503] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff window] (subtractive decode) [ 0.344561] pci_bus 0000:16: extended config space not accessible [ 0.344592] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17 [ 0.348083] ACPI: EC: interrupt unblocked [ 0.348102] ACPI: EC: event unblocked [ 0.348114] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.348117] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events [ 0.348253] SCSI subsystem initialized [ 0.348253] libata version 3.00 loaded. [ 0.348253] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.348253] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.348253] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.348253] vgaarb: loaded [ 0.348253] ACPI: bus type USB registered [ 0.348253] usbcore: registered new interface driver usbfs [ 0.348253] usbcore: registered new interface driver hub [ 0.348253] usbcore: registered new device driver usb [ 0.348253] pps_core: LinuxPPS API ver. 1 registered [ 0.348253] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.348253] PTP clock support registered [ 0.348253] EDAC MC: Ver: 3.0.0 [ 0.351177] PCI: Using ACPI for IRQ routing [ 0.354028] PCI: pci_cache_line_size set to 64 bytes [ 0.354216] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.354218] e820: reserve RAM buffer [mem 0x7f6b0000-0x7fffffff] [ 0.354393] NetLabel: Initializing [ 0.354395] NetLabel: domain hash size = 128 [ 0.354396] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.354423] NetLabel: unlabeled traffic allowed by default [ 0.354450] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.354450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.354450] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.356024] clocksource: Switched to clocksource hpet [ 0.382948] VFS: Disk quotas dquot_6.6.0 [ 0.383002] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.383054] *** VALIDATE hugetlbfs *** [ 0.383235] AppArmor: AppArmor Filesystem Enabled [ 0.383293] pnp: PnP ACPI init [ 0.384426] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.384429] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.384432] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.384434] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.384437] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.384439] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.384442] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.384445] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.384447] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.384450] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.384453] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.384455] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.384458] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.384461] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.384470] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.384688] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.384693] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.384696] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.384699] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.384701] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.384704] system 00:01: [io 0x1600-0x165f] could not be reserved [ 0.384707] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.384710] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.384712] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.384715] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.384717] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.384720] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.384728] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.384836] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384880] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.384920] pnp 00:04: Plug and Play ACPI device, IDs LEN0005 PNP0f13 (active) [ 0.385757] pnp 00:05: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.386906] pnp: PnP ACPI: found 6 devices [ 0.390725] thermal_sys: Registered thermal governor 'fair_share' [ 0.390727] thermal_sys: Registered thermal governor 'bang_bang' [ 0.390728] thermal_sys: Registered thermal governor 'step_wise' [ 0.390730] thermal_sys: Registered thermal governor 'user_space' [ 0.390731] thermal_sys: Registered thermal governor 'power_allocator' [ 0.395272] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.395336] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.395340] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.395372] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.395376] pci 0000:00:1c.2: BAR 13: assigned [io 0xa000-0xafff] [ 0.395381] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.395387] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.395400] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.395410] pci 0000:00:1c.0: bridge window [mem 0xf8600000-0xf86fffff 64bit pref] [ 0.395421] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.395426] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.395439] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.395448] pci 0000:00:1c.1: bridge window [mem 0xf8700000-0xf87fffff 64bit pref] [ 0.395457] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.395462] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff] [ 0.395475] pci 0000:00:1c.2: bridge window [mem 0xf8200000-0xf82fffff] [ 0.395482] pci 0000:00:1c.2: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.395495] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.395501] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.395512] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.395519] pci 0000:00:1c.3: bridge window [mem 0xd7d00000-0xd7dfffff 64bit pref] [ 0.395536] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.395541] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 0.395550] pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff] [ 0.395555] pci 0000:00:1c.4: bridge window [mem 0xd7a00000-0xd7afffff 64bit pref] [ 0.395572] pci 0000:15:00.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref] [ 0.395577] pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff] [ 0.395580] pci 0000:15:00.0: BAR 13: assigned [io 0x6000-0x60ff] [ 0.395582] pci 0000:15:00.0: BAR 14: assigned [io 0x6400-0x64ff] [ 0.395585] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.395587] pci 0000:15:00.0: bridge window [io 0x6000-0x60ff] [ 0.395597] pci 0000:15:00.0: bridge window [io 0x6400-0x64ff] [ 0.395607] pci 0000:15:00.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 0.395614] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff] [ 0.395623] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.395628] pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] [ 0.395639] pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd78fffff] [ 0.395646] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.395660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.395662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.395664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.395666] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.395668] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.395670] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.395672] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff window] [ 0.395674] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff window] [ 0.395677] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.395679] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.395681] pci_bus 0000:02: resource 2 [mem 0xf8600000-0xf86fffff 64bit pref] [ 0.395683] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.395685] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.395687] pci_bus 0000:03: resource 2 [mem 0xf8700000-0xf87fffff 64bit pref] [ 0.395689] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] [ 0.395691] pci_bus 0000:04: resource 1 [mem 0xf8200000-0xf82fffff] [ 0.395693] pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.395695] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.395697] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.395699] pci_bus 0000:05: resource 2 [mem 0xd7d00000-0xd7dfffff 64bit pref] [ 0.395701] pci_bus 0000:0d: resource 0 [io 0x5000-0x5fff] [ 0.395703] pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff] [ 0.395705] pci_bus 0000:0d: resource 2 [mem 0xd7a00000-0xd7afffff 64bit pref] [ 0.395707] pci_bus 0000:15: resource 0 [io 0x6000-0x9fff] [ 0.395709] pci_bus 0000:15: resource 1 [mem 0xd4000000-0xd78fffff] [ 0.395711] pci_bus 0000:15: resource 2 [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.395713] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7 window] [ 0.395715] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff window] [ 0.395717] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.395719] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.395721] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.395723] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.395725] pci_bus 0000:15: resource 10 [mem 0x80000000-0xfebfffff window] [ 0.395727] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff window] [ 0.395729] pci_bus 0000:16: resource 0 [io 0x6000-0x60ff] [ 0.395731] pci_bus 0000:16: resource 1 [io 0x6400-0x64ff] [ 0.395733] pci_bus 0000:16: resource 2 [mem 0xd8000000-0xdbffffff pref] [ 0.395735] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff] [ 0.395915] NET: Registered protocol family 2 [ 0.396189] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.396240] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.396352] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.396407] TCP: Hash tables configured (established 16384 bind 16384) [ 0.396482] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.396501] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.396629] NET: Registered protocol family 1 [ 0.396638] NET: Registered protocol family 44 [ 0.396658] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.398350] PCI: CLS 64 bytes, default 64 [ 0.398430] Trying to unpack rootfs image as initramfs... [ 1.373521] Freeing initrd memory: 42516K [ 1.373852] check: Scanning for low memory corruption every 60 seconds [ 1.374590] Initialise system trusted keyrings [ 1.374606] Key type blacklist registered [ 1.374718] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.377799] zbud: loaded [ 1.378545] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.378906] fuse: init (API version 7.31) [ 1.379146] Platform Keyring initialized [ 1.386702] Key type asymmetric registered [ 1.386704] Asymmetric key parser 'x509' registered [ 1.386724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.386804] io scheduler mq-deadline registered [ 1.387451] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 [ 1.387512] pcieport 0000:00:1c.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) [ 1.387993] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 [ 1.388057] pcieport 0000:00:1c.1: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) [ 1.388528] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26 [ 1.388580] pcieport 0000:00:1c.2: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) [ 1.389024] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27 [ 1.389072] pcieport 0000:00:1c.3: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) [ 1.389515] pcieport 0000:00:1c.4: PME: Signaling with IRQ 28 [ 1.389566] pcieport 0000:00:1c.4: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) [ 1.389808] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.389927] vesafb: mode is 1280x800x32, linelength=5120, pages=0 [ 1.389928] vesafb: scrolling: redraw [ 1.389930] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.389950] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 4032k, total 4032k [ 1.390034] fbcon: Deferring console take-over [ 1.390035] fb0: VESA VGA frame buffer device [ 1.390058] intel_idle: does not run on family 6 model 15 [ 1.390550] ACPI: AC Adapter [AC] (on-line) [ 1.390643] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.390673] ACPI: Lid Switch [LID] [ 1.390734] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.390751] ACPI: Sleep Button [SLPB] [ 1.390824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.390842] ACPI: Power Button [PWRF] [ 1.391821] Monitor-Mwait will be used to enter C-1 state [ 1.391839] Monitor-Mwait will be used to enter C-2 state [ 1.391856] Monitor-Mwait will be used to enter C-3 state [ 1.397754] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.397756] ACPI: Thermal Zone [THM0] (28 C) [ 1.399743] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.399745] ACPI: Thermal Zone [THM1] (26 C) [ 1.400162] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 1.400212] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.405077] Linux agpgart interface v0.103 [ 1.408289] tpm_tis 00:05: 1.2 TPM (device-id 0xFFFF, rev-id 255) [ 1.412349] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->10000us B 10000->10000us C 0->752000us D 0->752000us [ 1.420257] tpm tpm0: TPM is disabled/deactivated (0x6) [ 2.264360] loop: module loaded [ 2.264683] ata_piix 0000:00:1f.1: version 2.13 [ 2.265817] scsi host0: ata_piix [ 2.266135] scsi host1: ata_piix [ 2.266214] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 2.266215] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 2.266402] libphy: Fixed MDIO Bus: probed [ 2.266403] tun: Universal TUN/TAP device driver, 1.6 [ 2.266467] PPP generic driver version 2.4.2 [ 2.266510] ata2: port disabled--ignoring [ 2.266554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.266560] ehci-pci: EHCI PCI platform driver [ 2.266738] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 2.266747] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.270685] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 2.270701] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf8504800 [ 2.283056] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.283167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.283171] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.283175] usb usb1: Product: EHCI Host Controller [ 2.283178] usb usb1: Manufacturer: Linux 5.3.0-46-generic ehci_hcd [ 2.283181] usb usb1: SerialNumber: ... [ 2.283417] hub 1-0:1.0: USB hub found [ 2.283428] hub 1-0:1.0: 4 ports detected [ 2.283844] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.283853] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.283878] ehci-pci 0000:00:1d.7: debug port 1 [ 2.287800] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.287819] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf8504c00 [ 2.303016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.303240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.303243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.303245] usb usb2: Product: EHCI Host Controller [ 2.303247] usb usb2: Manufacturer: Linux 5.3.0-46-generic ehci_hcd [ 2.303249] usb usb2: SerialNumber: ... [ 2.303501] hub 2-0:1.0: USB hub found [ 2.303535] hub 2-0:1.0: 6 ports detected [ 2.304039] ehci-platform: EHCI generic platform driver [ 2.304068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.304073] ohci-pci: OHCI PCI platform driver [ 2.304092] ohci-platform: OHCI generic platform driver [ 2.304104] uhci_hcd: USB Universal Host Controller Interface driver [ 2.304247] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.304255] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.304266] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.304303] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 2.304483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.304486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.304488] usb usb3: Product: UHCI Host Controller [ 2.304491] usb usb3: Manufacturer: Linux 5.3.0-46-generic uhci_hcd [ 2.304493] usb usb3: SerialNumber: ... [ 2.304686] hub 3-0:1.0: USB hub found [ 2.304711] hub 3-0:1.0: 2 ports detected [ 2.305049] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.305057] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.305067] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.305108] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 2.305272] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.305274] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.305277] usb usb4: Product: UHCI Host Controller [ 2.305279] usb usb4: Manufacturer: Linux 5.3.0-46-generic uhci_hcd [ 2.305281] usb usb4: SerialNumber: ... [ 2.305452] hub 4-0:1.0: USB hub found [ 2.305469] hub 4-0:1.0: 2 ports detected [ 2.305775] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.305782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.305793] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.305830] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 [ 2.305917] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.305920] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.305922] usb usb5: Product: UHCI Host Controller [ 2.305924] usb usb5: Manufacturer: Linux 5.3.0-46-generic uhci_hcd [ 2.305927] usb usb5: SerialNumber: ... [ 2.306093] hub 5-0:1.0: USB hub found [ 2.306103] hub 5-0:1.0: 2 ports detected [ 2.306409] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.306416] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.306440] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.306475] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 2.306552] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.306555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.306557] usb usb6: Product: UHCI Host Controller [ 2.306559] usb usb6: Manufacturer: Linux 5.3.0-46-generic uhci_hcd [ 2.306561] usb usb6: SerialNumber: ... [ 2.306739] hub 6-0:1.0: USB hub found [ 2.306749] hub 6-0:1.0: 2 ports detected [ 2.307088] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.307099] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.307108] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.307150] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 2.307237] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.307239] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.307241] usb usb7: Product: UHCI Host Controller [ 2.307244] usb usb7: Manufacturer: Linux 5.3.0-46-generic uhci_hcd [ 2.307245] usb usb7: SerialNumber: ... [ 2.307416] hub 7-0:1.0: USB hub found [ 2.307425] hub 7-0:1.0: 2 ports detected [ 2.307691] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.315110] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.315117] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.315361] mousedev: PS/2 mouse device common for all mice [ 2.315739] rtc_cmos 00:02: RTC can wake from S4 [ 2.315978] rtc_cmos 00:02: registered as rtc0 [ 2.316012] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.316025] i2c /dev entries driver [ 2.316105] device-mapper: uevent: version 1.0.3 [ 2.316242] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 2.316275] platform eisa.0: Probing EISA bus 0 [ 2.316278] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.316280] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.316282] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.316285] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.316287] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.316289] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.316291] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.316293] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.316295] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.316298] platform eisa.0: EISA: Detected 0 cards [ 2.316302] intel_pstate: CPU model not supported [ 2.316378] ledtrig-cpu: registered to indicate activity on CPUs [ 2.316803] NET: Registered protocol family 10 [ 2.320925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.328488] Segment Routing with IPv6 [ 2.328533] NET: Registered protocol family 17 [ 2.328651] Key type dns_resolver registered [ 2.328986] RAS: Correctable Errors collector initialized. [ 2.329044] microcode: sig=0x6fd, pf=0x80, revision=0xa4 [ 2.329156] microcode: Microcode Update Driver: v2.2. [ 2.329496] registered taskstats version 1 [ 2.329511] Loading compiled-in X.509 certificates [ 2.333025] Loaded X.509 cert 'Build time autogenerated kernel key: 5650732eee8a3c09a605a6628308b9d1fc90aa8a' [ 2.333078] zswap: loaded using pool lzo/zbud [ 2.343201] Key type big_key registered [ 2.343210] Key type trusted registered [ 2.348275] Key type encrypted registered [ 2.348282] AppArmor: AppArmor sha1 policy hashing enabled [ 2.348301] ima: Allocated hash algorithm: sha1 [ 2.351197] ima: Error Communicating to TPM chip [ 2.354270] ima: Error Communicating to TPM chip [ 2.357189] ima: Error Communicating to TPM chip [ 2.360253] ima: Error Communicating to TPM chip [ 2.363288] ima: Error Communicating to TPM chip [ 2.366305] ima: Error Communicating to TPM chip [ 2.369154] ima: Error Communicating to TPM chip [ 2.372204] ima: Error Communicating to TPM chip [ 2.384431] No architecture policies found [ 2.384446] evm: Initialising EVM extended attributes: [ 2.384447] evm: security.selinux [ 2.384448] evm: security.SMACK64 [ 2.384449] evm: security.SMACK64EXEC [ 2.384450] evm: security.SMACK64TRANSMUTE [ 2.384450] evm: security.SMACK64MMAP [ 2.384451] evm: security.apparmor [ 2.384452] evm: security.ima [ 2.384453] evm: security.capability [ 2.384454] evm: HMAC attrs: 0x1 [ 2.385060] PM: Magic number: 0:708:671 [ 2.385268] rtc_cmos 00:02: setting system clock to 2020-04-26T06:41:42 UTC (1587883302) [ 2.389214] Unstable clock detected, switching default tracing clock to "global" [ 2.389214] If you want to keep using the local clock, then add: [ 2.389214] "trace_clock=local" [ 2.389214] on the kernel command line [ 2.425923] ata1.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, 1.04, max UDMA/33 [ 2.436301] scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-T10N 1.04 PQ: 0 ANSI: 5 [ 2.455044] random: fast init done [ 2.495463] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.495465] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.495783] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.495922] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.498906] Freeing unused decrypted memory: 2040K [ 2.500651] Freeing unused kernel image memory: 2660K [ 2.511058] Write protecting the kernel read-only data: 22528k [ 2.512613] Freeing unused kernel image memory: 2008K [ 2.513656] Freeing unused kernel image memory: 1480K [ 2.535891] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.535908] x86/mm: Checking user space page tables [ 2.558498] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.558502] Run /init as init process [ 2.579546] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.579759] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.579771] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.760026] tg3.c:v3.137 (May 11, 2014) [ 2.770347] sdhci: Secure Digital Host Controller Interface driver [ 2.770348] sdhci: Copyright(c) Pierre Ossman [ 2.772910] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 2.779006] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 2.779086] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 2.779249] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.783496] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.783690] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.793147] ahci 0000:00:1f.2: version 3.0 [ 2.793450] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode [ 2.793454] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 2.794767] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.794852] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 2.795206] tg3 0000:04:00.0: invalid large VPD tag 7f at offset 128 [ 2.796252] tg3 0000:04:00.0 eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 2.796255] tg3 0000:04:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.796258] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.796261] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.797666] scsi host2: ahci [ 2.804492] scsi host3: ahci [ 2.809211] scsi host4: ahci [ 2.809345] ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 29 [ 2.809347] ata4: DUMMY [ 2.809352] ata5: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 29 [ 2.843190] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 2.868837] tg3 0000:04:00.0 ens4: renamed from eth0 [ 2.972053] usb 5-1: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 2.972057] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2.972059] usb 5-1: Product: USB Optical Mouse [ 2.983948] hidraw: raw HID events driver (C) Jiri Kosina [ 3.003408] usbcore: registered new interface driver usbhid [ 3.003410] usbhid: USB HID core driver [ 3.007927] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:1BCF:0005.0001/input/input6 [ 3.008087] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 3.122206] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.122450] ata5: SATA link down (SStatus 0 SControl 300) [ 3.123458] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.123462] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.123606] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.123609] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.124626] ata3.00: ATA-7: ST960813AS, 3.CLF, max UDMA/100 [ 3.124628] ata3.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.126007] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.126009] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.126123] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.126125] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.127104] ata3.00: configured for UDMA/100 [ 3.127399] scsi 2:0:0:0: Direct-Access ATA ST960813AS F PQ: 0 ANSI: 5 [ 3.127966] sd 2:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.9 GiB) [ 3.127996] sd 2:0:0:0: [sda] Write Protect is off [ 3.127999] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.128040] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.128104] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.137762] sda: sda1 [ 3.138657] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.403012] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.463082] usb 2-2: New USB device found, idVendor=093a, idProduct=2700, bcdDevice= 1.00 [ 3.463087] usb 2-2: New USB device strings: Mfr=16, Product=96, SerialNumber=... [ 3.463091] usb 2-2: Product: USB2.0_Camera [ 3.463093] usb 2-2: Manufacturer: PixArt Imaging Inc. [ 4.066881] fbcon: Taking over console [ 4.067138] Console: switching to colour frame buffer device 160x50 [ 4.107077] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 4.138185] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5 [ 4.616545] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.870012] random: crng init done [ 4.870016] random: 7 urandom warning(s) missed due to ratelimiting [ 7.011265] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.031111] systemd[1]: Detected architecture x86-64. [ 7.057160] systemd[1]: Set hostname to ... [ 11.591996] systemd[1]: Reached target Remote File Systems. [ 11.592511] systemd[1]: Created slice User and Session Slice. [ 11.592811] systemd[1]: Created slice System Slice. [ 11.593000] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.593102] systemd[1]: Listening on udev Kernel Socket. [ 11.593235] systemd[1]: Listening on LVM2 poll daemon socket. [ 11.593350] systemd[1]: Listening on LVM2 metadata daemon socket. [ 11.976610] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 12.115193] systemd[1]: Started Uncomplicated firewall. [ 12.463993] lp: driver loaded but no devices found [ 12.566523] systemd[1]: Started Journal Service. [ 12.685825] systemd-journald[337]: Received request to flush runtime journal from PID 1 [ 12.875969] ppdev: user-space parallel port driver [ 23.624897] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20190703/utaddress-213) [ 23.624906] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.624913] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213) [ 23.624918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.624920] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213) [ 23.624925] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.624926] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 23.813151] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.816089] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 24.152219] pci 0000:00:00.0: Intel 965GM Chipset [ 24.152255] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 24.152784] pci 0000:00:00.0: detected 8192K stolen memory [ 24.152844] checking generic (e0000000 3f0000) vs hw (e0000000 10000000) [ 24.152846] fb0: switching to inteldrmfb from VESA VGA [ 24.152997] Console: switching to colour dummy device 80x25 [ 24.153074] i915 0000:00:02.0: vgaarb: deactivate vga console [ 24.154106] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 24.154108] [drm] Driver supports precise vblank timestamp query. [ 24.158088] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 24.186861] [drm] RC6 disabled, disabling runtime PM support [ 24.187252] [drm] Initialized overlay support. [ 24.187727] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 24.188019] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 24.191558] acpi device:02: registered as cooling_device2 [ 24.191705] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 24.339128] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 24.339304] ath5k 0000:03:00.0: registered as 'phy0' [ 24.375867] Non-volatile memory driver v1.3 [ 24.383453] fbcon: i915drmfb (fb0) is primary device [ 24.383542] Console: switching to colour frame buffer device 160x50 [ 24.383582] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 24.628411] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac [ 24.680534] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 24.680536] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 24.680538] thinkpad_acpi: ThinkPad BIOS 7OETB5WW (2.15 ), EC 7KHT24WW-1.08 [ 24.680539] thinkpad_acpi: Lenovo ThinkPad R61, model 8933W6M [ 24.684881] thinkpad_acpi: ACPI backlight control delay disabled [ 24.685277] thinkpad_acpi: radio switch found; radios are disabled [ 24.685300] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 24.685301] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 24.694397] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 24.709612] battery: new extension: ThinkPad Battery Extension [ 24.709697] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 24.768896] r592: driver successfully loaded [ 24.821065] snd_hda_codec_conexant hdaudioC0D0: CX20549 (Venice): BIOS auto-probing. [ 24.821383] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20549 (Venice): line_outs=1 (0x10/0x0/0x0/0x0/0x0) type:speaker [ 24.821386] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.821389] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 24.821391] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 24.821393] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x13/0x0 [ 24.821395] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 24.821397] snd_hda_codec_conexant hdaudioC0D0: Mic=0x14 [ 24.821400] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x15 [ 24.821402] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x12 [ 24.829827] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 24.829931] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 24.830023] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 24.854730] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 24.866911] mc: Linux media interface: v0.10 [ 24.973621] videodev: Linux video capture interface: v2.00 [ 24.987857] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 24.987864] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 24.987872] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x6000-0x9fff] [ 24.987875] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd78fffff] [ 24.987877] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd78fffff: [ 24.987887] excluding 0xd7570000-0xd78fffff [ 24.987891] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff 64bit pref] [ 24.987893] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: [ 24.987898] excluding 0xd8000000-0xdbffffff [ 25.082023] usb 2-2: current rate 15872 is different from the runtime rate 16000 [ 25.085508] usb 2-2: current rate 47872 is different from the runtime rate 48000 [ 25.101564] usbcore: registered new interface driver snd-usb-audio [ 25.171571] r852: driver loaded successfully [ 25.247134] ath: EEPROM regdomain: 0x62 [ 25.247137] ath: EEPROM indicates we should expect a direct regpair map [ 25.247140] ath: Country alpha2 being used: 00 [ 25.247142] ath: Regpair used: 0x62 [ 25.247440] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 25.248067] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61) [ 25.513280] kvm: disabled by bios [ 25.549459] kvm: disabled by bios [ 25.715470] uvcvideo: Found UVC 1.00 device USB2.0_Camera (093a:2700) [ 25.733482] uvcvideo 2-2:1.0: Entity type for entity Extension 4 was not initialized! [ 25.733487] uvcvideo 2-2:1.0: Entity type for entity Processing 3 was not initialized! [ 25.733489] uvcvideo 2-2:1.0: Entity type for entity Camera 1 was not initialized! [ 25.733615] input: USB2.0_Camera: USB2.0_Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input13 [ 25.733750] usbcore: registered new interface driver uvcvideo [ 25.733752] USB Video Class driver (1.1.1) [ 25.814293] intel_powerclamp: No package C-state available [ 25.847476] intel_powerclamp: No package C-state available [ 31.989228] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 31.989238] excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 31.989274] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 31.989289] clean [ 31.989315] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 31.989328] excluding 0x60000000-0x60ffffff [ 32.129003] ath5k 0000:03:00.0 wls3: renamed from wlan0 [ 41.463015] Adding 999420k swap on /dev/mapper/XXXXXXXXXXXXXXXXXX Priority:-2 extents:1 across:999420k FS [ 60.868902] tg3 0000:04:00.0 ens4: Link is up at 100 Mbps, full duplex [ 60.868906] tg3 0000:04:00.0 ens4: Flow control is on for TX and on for RX [ 60.868929] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready [ 63.762138] wls3: authenticate with XX:XX:XX:XX:XX:XX [ 63.767257] wls3: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 63.768798] wls3: authenticated [ 63.775040] wls3: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 63.777276] wls3: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0xc01 status=0 aid=1) [ 63.777378] wls3: associated [ 63.777508] ath: EEPROM regdomain: 0x80cb [ 63.777509] ath: EEPROM indicates we should expect a country code [ 63.777510] ath: doing EEPROM country->regdmn map search [ 63.777511] ath: country maps to regdmn code: 0x37 [ 63.777512] ath: Country alpha2 being used: CZ [ 63.777513] ath: Regpair used: 0x37 [ 63.777515] ath: regdomain 0x80cb dynamically updated by country element [ 63.777700] IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready [ 89.887311] usb 2-2: current rate 47872 is different from the runtime rate 48000 [ 89.921197] usb 2-2: current rate 47872 is different from the runtime rate 48000 [ 109.863497] rfkill: input handler disabled [ 239.836420] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 410.190328] perf: interrupt took too long (3177 > 3141), lowering kernel.perf_event_max_sample_rate to 62750 [ 610.035144] perf: interrupt took too long (3976 > 3971), lowering kernel.perf_event_max_sample_rate to 50250 [ 1118.321359] perf: interrupt took too long (4986 > 4970), lowering kernel.perf_event_max_sample_rate to 40000 [ 1563.071125] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1563.105230] usb 1-3: New USB device found, idVendor=13fe, idProduct=4223, bcdDevice= 1.00 [ 1563.105233] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1563.105236] usb 1-3: Product: USB DISK Pro [ 1563.105238] usb 1-3: SerialNumber: ... [ 1564.813338] usb-storage 1-3:1.0: USB Mass Storage device detected [ 1564.813560] scsi host5: usb-storage 1-3:1.0 [ 1564.813746] usbcore: registered new interface driver usb-storage [ 1564.980150] usbcore: registered new interface driver uas [ 1565.837129] scsi 5:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 6 [ 1565.838031] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1567.554646] sd 5:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB) [ 1567.555886] sd 5:0:0:0: [sdb] Write Protect is off [ 1567.555892] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1567.556617] sd 5:0:0:0: [sdb] No Caching mode page found [ 1567.556624] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1567.573842] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 1575.524678] EXT4-fs (sdb): recovery complete [ 1576.298906] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) [ 2793.334587] sdb: sdb1 sdb2 [ 3002.987037] perf: interrupt took too long (6234 > 6232), lowering kernel.perf_event_max_sample_rate to 32000 [ 3203.654408] usb 1-3: USB disconnect, device number 2 [ 3206.723059] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 3206.757297] usb 1-3: New USB device found, idVendor=13fe, idProduct=4223, bcdDevice= 1.00 [ 3206.757304] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3206.757309] usb 1-3: Product: USB DISK Pro [ 3206.757315] usb 1-3: SerialNumber: ... [ 3206.757928] usb-storage 1-3:1.0: USB Mass Storage device detected [ 3206.758275] scsi host5: usb-storage 1-3:1.0 [ 3207.793372] scsi 5:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 6 [ 3207.794156] scsi 5:0:0:0: Attached scsi generic sg2 type 0 [ 3209.396834] sd 5:0:0:0: [sdb] 15100224 512-byte logical blocks: (7.73 GB/7.20 GiB) [ 3209.397691] sd 5:0:0:0: [sdb] Write Protect is off [ 3209.397695] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3209.398451] sd 5:0:0:0: [sdb] No Caching mode page found [ 3209.398458] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 3209.404473] sdb: sdb1 sdb2 [ 3209.408300] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 3210.839939] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 3210.842556] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 3211.004426] ISO 9660 Extensions: RRIP_1991A [ 3247.485024] usb 1-3: USB disconnect, device number 3 [ 3318.375015] usb 2-2: current rate 47872 is different from the runtime rate 48000


Hardware for Linux and BSD

GitHub