[ 0.000000] Linux version 6.2.0-32-generic (XXX@XXX) (x86_64-linux-gnu-gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #32~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 18 10:40:13 UTC 2 (Ubuntu 6.2.0-32.32~22.04.1-generic 6.2.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-32-generic root=UUID=HASH_66F-920A-06EE-7E17-93281A6A2D34 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009efffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000009f0d000-0x00000000a0649fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a064a000-0x00000000a2049fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a204a000-0x00000000a2749fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a274a000-0x00000000a27c9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a27ca000-0x00000000b4418fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b4419000-0x00000000b4419fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b441a000-0x00000000c7ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000cbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fd0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd4fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedf1000-0x00000000fedf1fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040e2fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000040e300000-0x000000042fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000fd01ffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x8c757018-0x8c764857] usable ==> usable [ 0.000000] e820: update [mem 0x8c757018-0x8c764857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009efffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009f00000-0x0000000009f0cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000009f0d000-0x000000008c757017] usable [ 0.000000] reserve setup_data: [mem 0x000000008c757018-0x000000008c764857] usable [ 0.000000] reserve setup_data: [mem 0x000000008c764858-0x00000000a0649fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a064a000-0x00000000a2049fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a204a000-0x00000000a2749fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a274a000-0x00000000a27c9fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000a27ca000-0x00000000b4418fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4419000-0x00000000b4419fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b441a000-0x00000000c7ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c8000000-0x00000000cbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf000000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fd0fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd400000-0x00000000fd4fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedf1000-0x00000000fedf1fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000040e2fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000040e300000-0x000000042fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000fd00000000-0x000000fd01ffffff] reserved [ 0.000000] efi: EFI v2.70 by HP [ 0.000000] efi: ACPI=0xa27c9000 ACPI 2.0=0xa27c9014 SMBIOS=0xa191b000 SMBIOS 3.0=0xa1919000 TPMFinalLog=0xa24b4000 ESRT=0xa1917118 MEMATTR=0x9c43d018 MOKvar=0xa1945000 RNG=0xa276f018 TPMEventLog=0x8c765018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem75: MMIO range=[0xfd000000-0xfd0fffff] (1MB) from e820 map [ 0.000000] e820: remove [mem 0xfd000000-0xfd0fffff] reserved [ 0.000000] efi: Remove mem76: MMIO range=[0xfd400000-0xfd4fffff] (1MB) from e820 map [ 0.000000] e820: remove [mem 0xfd400000-0xfd4fffff] reserved [ 0.000000] efi: Not removing mem77: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem78: MMIO range=[0xfedf1000-0xfedf1fff] (4KB) from e820 map [ 0.000000] efi: Remove mem80: MMIO range=[0xfd00000000-0xfd01ffffff] (32MB) from e820 map [ 0.000000] e820: remove [mem 0xfd00000000-0xfd01ffffff] reserved [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: HP HP EliteBook 845 G8 Notebook PC/8895, BIOS T82 Ver. 01.10.01 08/18/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2295.687 MHz processor [ 0.000354] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000356] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000361] last_pfn = 0x40e300 max_arch_pfn = 0x400000000 [ 0.000369] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001727] last_pfn = 0xc8000 max_arch_pfn = 0x400000000 [ 0.005325] esrt: Reserving ESRT space from 0x00000000a1917118 to 0x00000000a19171a0. [ 0.005336] Using GB pages for direct mapping [ 0.005877] secureboot: Secure boot enabled [ 0.005877] RAMDISK: [mem 0x8c76d000-0x909a2fff] [ 0.005882] ACPI: Early table checksum verification disabled [ 0.005885] ACPI: RSDP 0x00000000A27C9014 000024 (v02 HPQOEM) [ 0.005889] ACPI: XSDT 0x00000000A2792188 00015C (v01 HPQOEM SLIC-BPC 00000001 01000013) [ 0.005894] ACPI: FACP 0x00000000A27B3000 00010C (v05 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.005898] ACPI: DSDT 0x00000000A2798000 014465 (v02 HPQOEM 8895 00000000 INTL 20160527) [ 0.005900] ACPI: FACS 0x00000000A249E000 000040 [ 0.005902] ACPI: SSDT 0x00000000A27C7000 0002D7 (v01 HP NVTEC 00000001 INTL 20160527) [ 0.005904] ACPI: SSDT 0x00000000A27C6000 00012A (v02 HP ShmTable 00000001 INTL 20160527) [ 0.005906] ACPI: SSDT 0x00000000A27BE000 0072B0 (v02 AMD AmdTable 00000002 MSFT 04000000) [ 0.005908] ACPI: IVRS 0x00000000A27BD000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000000) [ 0.005910] ACPI: SSDT 0x00000000A27BC000 000148 (v01 HP OPALPWD 00000001 INTL 20160527) [ 0.005912] ACPI: RTMA 0x00000000A27BA000 00009E (v01 HP _HBMART_ 00001000 HP 00000001) [ 0.005914] ACPI: SSDT 0x00000000A27B8000 001575 (v02 HP UcsiAcpi 00000001 INTL 20160527) [ 0.005916] ACPI: SSDT 0x00000000A27B7000 0000FB (v02 HP UcsiCntr 00000001 INTL 20160527) [ 0.005917] ACPI: SSDT 0x00000000A27B6000 0005FB (v02 HPQOEM Tpm2Tabl 00001000 INTL 20160527) [ 0.005919] ACPI: TPM2 0x00000000A27B5000 000034 (v03 HPQOEM EDK2 00000002 01000013) [ 0.005921] ACPI: OEML 0x00000000A27B4000 000028 (v03 HPQOEM EDK2 00000002 01000013) [ 0.005923] ACPI: ASF! 0x00000000A27B2000 00006E (v32 HPQOEM 8895 00000001 HP 00000001) [ 0.005925] ACPI: MSDM 0x00000000A27B1000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.005927] ACPI: WSMT 0x00000000A27B0000 000028 (v01 HPQOEM 8895 00000001 HP 00000001) [ 0.005928] ACPI: HPET 0x00000000A27AF000 000038 (v01 HPQOEM 8895 00000001 HP 00000001) [ 0.005930] ACPI: APIC 0x00000000A27AE000 000138 (v02 HPQOEM 8895 00000001 HP 00000001) [ 0.005932] ACPI: MCFG 0x00000000A27AD000 00003C (v01 HPQOEM 8895 00000001 HP 00000001) [ 0.005934] ACPI: SSDT 0x00000000A2793000 003E88 (v02 AMD AmdTable 00000001 AMD 00000001) [ 0.005935] ACPI: CRAT 0x00000000A27C8000 000B68 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005937] ACPI: CDIT 0x00000000A2791000 000029 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005939] ACPI: SSDT 0x00000000A2790000 00019B (v01 HP HPNBCONV 00001000 INTL 20160527) [ 0.005941] ACPI: SSDT 0x00000000A278F000 00052B (v01 HP AMDTPL 00001000 INTL 20160527) [ 0.005943] ACPI: SSDT 0x00000000A278D000 0018D3 (v01 HP HPADNBWL 00001000 INTL 20160527) [ 0.005945] ACPI: SSDT 0x00000000A278C000 000032 (v01 HP HPCONDEV 00001000 INTL 20160527) [ 0.005946] ACPI: SSDT 0x00000000A278B000 000115 (v01 HP HPSANIMD 00001000 INTL 20160527) [ 0.005948] ACPI: SSDT 0x00000000A278A000 000069 (v01 HP HPCAHWID 00001000 INTL 20160527) [ 0.005950] ACPI: VFCT 0x00000000A277C000 00D884 (v01 HPQOEM SLIC-BPC 00000001 AMD 31504F47) [ 0.005952] ACPI: SSDT 0x00000000A2797000 000149 (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005954] ACPI: SSDT 0x00000000A2778000 003855 (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005955] ACPI: BGRT 0x00000000A2777000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.005957] ACPI: SSDT 0x00000000A2776000 000241 (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005959] ACPI: SSDT 0x00000000A2775000 00064D (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005961] ACPI: SSDT 0x00000000A2774000 0000D0 (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005963] ACPI: SSDT 0x00000000A2773000 000707 (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005964] ACPI: SSDT 0x00000000A2772000 00008D (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005966] ACPI: SSDT 0x00000000A2771000 00087C (v01 AMD AmdTable 00000001 INTL 20160527) [ 0.005968] ACPI: SSDT 0x00000000A27BB000 0002F9 (v02 HP PwrCtlEv 00000001 INTL 20160527) [ 0.005970] ACPI: FPDT 0x00000000A2770000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.005971] ACPI: Reserving FACP table memory at [mem 0xa27b3000-0xa27b310b] [ 0.005972] ACPI: Reserving DSDT table memory at [mem 0xa2798000-0xa27ac464] [ 0.005973] ACPI: Reserving FACS table memory at [mem 0xa249e000-0xa249e03f] [ 0.005974] ACPI: Reserving SSDT table memory at [mem 0xa27c7000-0xa27c72d6] [ 0.005974] ACPI: Reserving SSDT table memory at [mem 0xa27c6000-0xa27c6129] [ 0.005975] ACPI: Reserving SSDT table memory at [mem 0xa27be000-0xa27c52af] [ 0.005975] ACPI: Reserving IVRS table memory at [mem 0xa27bd000-0xa27bd1a3] [ 0.005976] ACPI: Reserving SSDT table memory at [mem 0xa27bc000-0xa27bc147] [ 0.005976] ACPI: Reserving RTMA table memory at [mem 0xa27ba000-0xa27ba09d] [ 0.005977] ACPI: Reserving SSDT table memory at [mem 0xa27b8000-0xa27b9574] [ 0.005978] ACPI: Reserving SSDT table memory at [mem 0xa27b7000-0xa27b70fa] [ 0.005978] ACPI: Reserving SSDT table memory at [mem 0xa27b6000-0xa27b65fa] [ 0.005979] ACPI: Reserving TPM2 table memory at [mem 0xa27b5000-0xa27b5033] [ 0.005979] ACPI: Reserving OEML table memory at [mem 0xa27b4000-0xa27b4027] [ 0.005980] ACPI: Reserving ASF! table memory at [mem 0xa27b2000-0xa27b206d] [ 0.005981] ACPI: Reserving MSDM table memory at [mem 0xa27b1000-0xa27b1054] [ 0.005981] ACPI: Reserving WSMT table memory at [mem 0xa27b0000-0xa27b0027] [ 0.005982] ACPI: Reserving HPET table memory at [mem 0xa27af000-0xa27af037] [ 0.005982] ACPI: Reserving APIC table memory at [mem 0xa27ae000-0xa27ae137] [ 0.005983] ACPI: Reserving MCFG table memory at [mem 0xa27ad000-0xa27ad03b] [ 0.005983] ACPI: Reserving SSDT table memory at [mem 0xa2793000-0xa2796e87] [ 0.005984] ACPI: Reserving CRAT table memory at [mem 0xa27c8000-0xa27c8b67] [ 0.005985] ACPI: Reserving CDIT table memory at [mem 0xa2791000-0xa2791028] [ 0.005985] ACPI: Reserving SSDT table memory at [mem 0xa2790000-0xa279019a] [ 0.005986] ACPI: Reserving SSDT table memory at [mem 0xa278f000-0xa278f52a] [ 0.005986] ACPI: Reserving SSDT table memory at [mem 0xa278d000-0xa278e8d2] [ 0.005987] ACPI: Reserving SSDT table memory at [mem 0xa278c000-0xa278c031] [ 0.005988] ACPI: Reserving SSDT table memory at [mem 0xa278b000-0xa278b114] [ 0.005988] ACPI: Reserving SSDT table memory at [mem 0xa278a000-0xa278a068] [ 0.005989] ACPI: Reserving VFCT table memory at [mem 0xa277c000-0xa2789883] [ 0.005989] ACPI: Reserving SSDT table memory at [mem 0xa2797000-0xa2797148] [ 0.005990] ACPI: Reserving SSDT table memory at [mem 0xa2778000-0xa277b854] [ 0.005991] ACPI: Reserving BGRT table memory at [mem 0xa2777000-0xa2777037] [ 0.005991] ACPI: Reserving SSDT table memory at [mem 0xa2776000-0xa2776240] [ 0.005992] ACPI: Reserving SSDT table memory at [mem 0xa2775000-0xa277564c] [ 0.005993] ACPI: Reserving SSDT table memory at [mem 0xa2774000-0xa27740cf] [ 0.005993] ACPI: Reserving SSDT table memory at [mem 0xa2773000-0xa2773706] [ 0.005994] ACPI: Reserving SSDT table memory at [mem 0xa2772000-0xa277208c] [ 0.005994] ACPI: Reserving SSDT table memory at [mem 0xa2771000-0xa277187b] [ 0.005995] ACPI: Reserving SSDT table memory at [mem 0xa27bb000-0xa27bb2f8] [ 0.005996] ACPI: Reserving FPDT table memory at [mem 0xa2770000-0xa2770043] [ 0.006154] No NUMA configuration found [ 0.006155] Faking a node at [mem 0x0000000000000000-0x000000040e2fffff] [ 0.006162] NODE_DATA(0) allocated [mem 0x40e2d5000-0x40e2fffff] [ 0.006313] Zone ranges: [ 0.006313] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006315] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006316] Normal [mem 0x0000000100000000-0x000000040e2fffff] [ 0.006317] Device empty [ 0.006317] Movable zone start for each node [ 0.006319] Early memory node ranges [ 0.006319] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.006320] node 0: [mem 0x0000000000100000-0x0000000009efffff] [ 0.006321] node 0: [mem 0x0000000009f0d000-0x00000000a0649fff] [ 0.006322] node 0: [mem 0x00000000a27ca000-0x00000000b4418fff] [ 0.006322] node 0: [mem 0x00000000b441a000-0x00000000c7ffffff] [ 0.006323] node 0: [mem 0x0000000100000000-0x000000040e2fffff] [ 0.006325] Initmem setup node 0 [mem 0x0000000000001000-0x000000040e2fffff] [ 0.006328] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006343] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.010512] On node 0, zone DMA32: 13 pages in unavailable ranges [ 0.011169] On node 0, zone DMA32: 8576 pages in unavailable ranges [ 0.011810] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.034870] On node 0, zone Normal: 7424 pages in unavailable ranges [ 0.035000] ACPI: PM-Timer IO Port: 0x408 [ 0.035010] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.035011] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.035012] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.035012] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.035013] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.035013] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.035014] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.035014] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.035015] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.035015] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.035016] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.035016] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.035016] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.035017] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.035017] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.035018] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.035033] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.035046] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.035047] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.035049] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.035052] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.035053] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.035062] e820: update [mem 0x9be36000-0x9beabfff] usable ==> reserved [ 0.035073] smpboot: Allowing 16 CPUs, 4 hotplug CPUs [ 0.035094] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.035095] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.035096] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.035097] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0cfff] [ 0.035099] PM: hibernation: Registered nosave memory: [mem 0x8c757000-0x8c757fff] [ 0.035100] PM: hibernation: Registered nosave memory: [mem 0x8c764000-0x8c764fff] [ 0.035101] PM: hibernation: Registered nosave memory: [mem 0x9be36000-0x9beabfff] [ 0.035102] PM: hibernation: Registered nosave memory: [mem 0xa064a000-0xa2049fff] [ 0.035103] PM: hibernation: Registered nosave memory: [mem 0xa204a000-0xa2749fff] [ 0.035103] PM: hibernation: Registered nosave memory: [mem 0xa274a000-0xa27c9fff] [ 0.035105] PM: hibernation: Registered nosave memory: [mem 0xb4419000-0xb4419fff] [ 0.035106] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcbffffff] [ 0.035106] PM: hibernation: Registered nosave memory: [mem 0xcc000000-0xceffffff] [ 0.035107] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff] [ 0.035107] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfed7ffff] [ 0.035108] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.035108] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedf0fff] [ 0.035109] PM: hibernation: Registered nosave memory: [mem 0xfedf1000-0xfedf1fff] [ 0.035109] PM: hibernation: Registered nosave memory: [mem 0xfedf2000-0xffffffff] [ 0.035111] [mem 0xd0000000-0xfed7ffff] available for PCI devices [ 0.035112] Booting paravirtualized kernel on bare hardware [ 0.035115] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035124] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.035743] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.035749] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.035750] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.035785] Fallback order for Node 0: 0 [ 0.035787] Built 1 zonelists, mobility grouping on. Total pages: 3951468 [ 0.035788] Policy zone: Normal [ 0.035789] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-32-generic root=UUID=HASH_66F-920A-06EE-7E17-93281A6A2D34 ro quiet splash vt.handoff=7 [ 0.035858] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.2.0-32-generic", will be passed to user space. [ 0.037830] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.038788] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038891] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.038939] software IO TLB: area num 16. [ 0.084645] Memory: 15465900K/16057408K available (20480K kernel code, 4151K rwdata, 12712K rodata, 4764K init, 17540K bss, 591248K reserved, 0K cma-reserved) [ 0.084746] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.084772] ftrace: allocating 53405 entries in 209 pages [ 0.095911] ftrace: allocated 209 pages with 4 groups [ 0.096656] Dynamic Preempt: voluntary [ 0.096691] rcu: Preemptible hierarchical RCU implementation. [ 0.096692] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.096693] Trampoline variant of Tasks RCU enabled. [ 0.096694] Rude variant of Tasks RCU enabled. [ 0.096694] Tracing variant of Tasks RCU enabled. [ 0.096694] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.096695] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.098725] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.098901] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.098991] Console: colour dummy device 80x25 [ 0.098993] printk: console [tty0] enabled [ 0.099030] ACPI: Core revision 20221020 [ 0.099271] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.099288] APIC: Switch to symmetric I/O mode setup [ 0.100319] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160 [ 0.100321] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160 [ 0.100321] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160 [ 0.100322] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160 [ 0.100323] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0 [ 0.100878] Switched APIC routing to physical flat. [ 0.102222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.119300] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21174ac26ec, max_idle_ns: 440795209452 ns [ 0.119305] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.37 BogoMIPS (lpj=9182748) [ 0.119322] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.119354] LVT offset 1 assigned for vector 0xf9 [ 0.119457] LVT offset 2 assigned for vector 0xf4 [ 0.119482] process: using mwait in idle threads [ 0.119483] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256 [ 0.119484] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.119487] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.119489] Spectre V2 : Mitigation: Retpolines [ 0.119490] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.119490] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.119491] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.119492] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.119493] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.119494] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.119500] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.119501] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.119502] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.119503] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.119504] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.119505] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.119506] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.139253] Freeing SMP alternatives memory: 44K [ 0.139256] pid_max: default: 32768 minimum: 301 [ 0.140623] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor [ 0.140629] landlock: Up and running. [ 0.140630] Yama: becoming mindful. [ 0.140651] AppArmor: AppArmor initialized [ 0.140695] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.140720] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.252886] smpboot: CPU0: AMD Ryzen 5 PRO 5650U with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0) [ 0.252973] cblist_init_generic: Setting adjustable number of callback queues. [ 0.252976] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.252986] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.252996] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.253009] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.253014] ... version: 0 [ 0.253015] ... bit width: 48 [ 0.253016] ... generic registers: 6 [ 0.253016] ... value mask: 0000ffffffffffff [ 0.253017] ... max period: 00007fffffffffff [ 0.253017] ... fixed-purpose events: 0 [ 0.253017] ... event mask: 000000000000003f [ 0.253074] signal: max sigframe size: 3376 [ 0.253093] rcu: Hierarchical SRCU implementation. [ 0.253094] rcu: Max phase no-delay instances is 1000. [ 0.253430] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.253557] smp: Bringing up secondary CPUs ... [ 0.253633] x86: Booting SMP configuration: [ 0.253634] .... node #0, CPUs: #1 [ 0.255413] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.255454] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.277528] smp: Brought up 1 node, 12 CPUs [ 0.277528] smpboot: Max logical packages: 2 [ 0.277528] smpboot: Total of 12 processors activated (55096.48 BogoMIPS) [ 0.279551] devtmpfs: initialized [ 0.279551] x86/mm: Memory block size: 128MB [ 0.279966] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0cfff] (53248 bytes) [ 0.279966] ACPI: PM: Registering ACPI NVS region [mem 0xa204a000-0xa2749fff] (7340032 bytes) [ 0.279966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.279966] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.279966] pinctrl core: initialized pinctrl subsystem [ 0.279966] PM: RTC time: 09:17:43, date: 2023-09-19 [ 0.279966] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.280146] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.280272] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.280397] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.280405] thermal_sys: Registered thermal governor 'fair_share' [ 0.280405] thermal_sys: Registered thermal governor 'bang_bang' [ 0.280405] thermal_sys: Registered thermal governor 'step_wise' [ 0.280405] thermal_sys: Registered thermal governor 'user_space' [ 0.280405] thermal_sys: Registered thermal governor 'power_allocator' [ 0.280405] EISA bus registered [ 0.280405] cpuidle: using governor ladder [ 0.280405] cpuidle: using governor menu [ 0.280405] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.280405] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.280405] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.280405] PCI: not using MMCONFIG [ 0.280405] PCI: Using configuration type 1 for base access [ 0.280405] PCI: Using configuration type 1 for extended access [ 0.280405] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.280405] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.280405] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.280405] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.280405] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.280405] ACPI: Added _OSI(Module Device) [ 0.280405] ACPI: Added _OSI(Processor Device) [ 0.280405] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.280405] ACPI: Added _OSI(Processor Aggregator Device) [ 0.296891] ACPI: 24 ACPI AML tables successfully acquired and loaded [ 0.301025] ACPI: EC: EC started [ 0.301025] ACPI: EC: interrupt blocked [ 0.301025] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.310152] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.310155] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.310156] ACPI: Interpreter enabled [ 0.310174] ACPI: PM: (supports S0 S4 S5) [ 0.310175] ACPI: Using IOAPIC for interrupt routing [ 0.310939] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.312506] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources [ 0.312509] PCI: not using MMCONFIG [ 0.312511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.312512] PCI: Using E820 reservations for host bridge windows [ 0.312770] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.313456] ACPI: \_SB_.PCI0.GP12.PXP_: New power resource [ 0.313575] ACPI: \_SB_.PCI0.GP13.NCRD.WLRT: New power resource [ 0.313895] ACPI: \_SB_.PCI0.GP24.P0NV: New power resource [ 0.314554] ACPI: \_SB_.PCI0.BUSA.XHC0.P0U0: New power resource [ 0.314615] ACPI: \_SB_.PCI0.BUSA.XHC0.P3U0: New power resource [ 0.315154] ACPI: \_SB_.PCI0.BUSA.XHC1.P0U1: New power resource [ 0.315215] ACPI: \_SB_.PCI0.BUSA.XHC1.P3U1: New power resource [ 0.315753] ACPI: \_SB_.PCI0.BUSA.HDEF.APPR: New power resource [ 0.319671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.319676] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.319713] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.319774] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.319775] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.320107] PCI host bridge to bus 0000:00 [ 0.320108] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.320109] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.320110] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.320111] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window] [ 0.320111] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window] [ 0.320112] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window] [ 0.320113] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfeafffff window] [ 0.320113] pci_bus 0000:00: root bus resource [mem 0x40e300000-0x42fffffff window] [ 0.320114] pci_bus 0000:00: root bus resource [mem 0x450200000-0xfd01ffffff window] [ 0.320115] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.320143] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 0.320378] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 0.320613] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 0.320809] pci 0000:00:01.3: [1022:1634] type 01 class 0x060400 [ 0.320880] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.320976] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 0.321170] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400 [ 0.321239] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.321341] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 0.321515] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 0.321538] pci 0000:00:08.1: enabling Extended Tags [ 0.321574] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.321699] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.321803] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.321917] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 [ 0.321952] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 [ 0.321986] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 [ 0.322022] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 [ 0.322059] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 [ 0.322094] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 [ 0.322133] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 [ 0.322167] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 [ 0.322644] pci 0000:01:00.0: [10ec:c822] type 00 class 0x028000 [ 0.322662] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.322685] pci 0000:01:00.0: reg 0x18: [mem 0xfb500000-0xfb50ffff 64bit] [ 0.322799] pci 0000:01:00.0: supports D1 D2 [ 0.322799] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.323383] pci 0000:00:01.3: PCI bridge to [bus 01] [ 0.323387] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff] [ 0.323388] pci 0000:00:01.3: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.323463] pci 0000:02:00.0: [1e0f:000c] type 00 class 0x010802 [ 0.323479] pci 0000:02:00.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit] [ 0.323650] pci 0000:02:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:02.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) [ 0.323737] pci 0000:00:02.4: PCI bridge to [bus 02] [ 0.323741] pci 0000:00:02.4: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.323793] pci 0000:03:00.0: [1002:1638] type 00 class 0x030000 [ 0.323804] pci 0000:03:00.0: reg 0x10: [mem 0x460000000-0x46fffffff 64bit pref] [ 0.323811] pci 0000:03:00.0: reg 0x18: [mem 0x470000000-0x4701fffff 64bit pref] [ 0.323816] pci 0000:03:00.0: reg 0x20: [io 0x1000-0x10ff] [ 0.323820] pci 0000:03:00.0: reg 0x24: [mem 0xfb300000-0xfb37ffff] [ 0.323828] pci 0000:03:00.0: enabling Extended Tags [ 0.323839] pci 0000:03:00.0: BAR 0: assigned to efifb [ 0.323881] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.323920] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.323989] pci 0000:03:00.1: [1002:1637] type 00 class 0x040300 [ 0.323996] pci 0000:03:00.1: reg 0x10: [mem 0xfb3c8000-0xfb3cbfff] [ 0.324016] pci 0000:03:00.1: enabling Extended Tags [ 0.324046] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.324104] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000 [ 0.324116] pci 0000:03:00.2: reg 0x18: [mem 0xfb200000-0xfb2fffff] [ 0.324125] pci 0000:03:00.2: reg 0x24: [mem 0xfb3cc000-0xfb3cdfff] [ 0.324132] pci 0000:03:00.2: enabling Extended Tags [ 0.324216] pci 0000:03:00.3: [1022:1639] type 00 class 0x0c0330 [ 0.324226] pci 0000:03:00.3: reg 0x10: [mem 0xfb000000-0xfb0fffff 64bit] [ 0.324249] pci 0000:03:00.3: enabling Extended Tags [ 0.324280] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 0.324338] pci 0000:03:00.4: [1022:1639] type 00 class 0x0c0330 [ 0.324348] pci 0000:03:00.4: reg 0x10: [mem 0xfb100000-0xfb1fffff 64bit] [ 0.324371] pci 0000:03:00.4: enabling Extended Tags [ 0.324403] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold [ 0.324461] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000 [ 0.324468] pci 0000:03:00.5: reg 0x10: [mem 0xfb380000-0xfb3bffff] [ 0.324488] pci 0000:03:00.5: enabling Extended Tags [ 0.324517] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold [ 0.324571] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300 [ 0.324578] pci 0000:03:00.6: reg 0x10: [mem 0xfb3c0000-0xfb3c7fff] [ 0.324598] pci 0000:03:00.6: enabling Extended Tags [ 0.324627] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold [ 0.324698] pci 0000:00:08.1: PCI bridge to [bus 03] [ 0.324701] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] [ 0.324702] pci 0000:00:08.1: bridge window [mem 0xfb000000-0xfb3fffff] [ 0.324705] pci 0000:00:08.1: bridge window [mem 0x460000000-0x4701fffff 64bit pref] [ 0.326281] Low-power S0 idle used by default for system suspend [ 0.326369] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.326370] ACPI: PCI: Interrupt link LNKA disabled [ 0.326448] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.326449] ACPI: PCI: Interrupt link LNKB disabled [ 0.326508] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.326508] ACPI: PCI: Interrupt link LNKC disabled [ 0.326585] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.326586] ACPI: PCI: Interrupt link LNKD disabled [ 0.326655] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.326655] ACPI: PCI: Interrupt link LNKE disabled [ 0.326710] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.326711] ACPI: PCI: Interrupt link LNKF disabled [ 0.326765] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.326766] ACPI: PCI: Interrupt link LNKG disabled [ 0.326820] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.326821] ACPI: PCI: Interrupt link LNKH disabled [ 0.327883] ACPI: EC: interrupt unblocked [ 0.327884] ACPI: EC: event unblocked [ 0.327889] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.327889] ACPI: EC: GPE=0x3 [ 0.327890] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.327891] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.327924] iommu: Default domain type: Translated [ 0.327924] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.327924] SCSI subsystem initialized [ 0.327924] libata version 3.00 loaded. [ 0.327924] ACPI: bus type USB registered [ 0.327924] usbcore: registered new interface driver usbfs [ 0.327924] usbcore: registered new interface driver hub [ 0.327924] usbcore: registered new device driver usb [ 0.332916] pps_core: LinuxPPS API ver. 1 registered [ 0.332918] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.332920] PTP clock support registered [ 0.332934] EDAC MC: Ver: 3.0.0 [ 0.332934] Registered efivars operations [ 0.335440] NetLabel: Initializing [ 0.335441] NetLabel: domain hash size = 128 [ 0.335442] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.335453] NetLabel: unlabeled traffic allowed by default [ 0.335464] mctp: management component transport protocol core [ 0.335464] NET: Registered PF_MCTP protocol family [ 0.335464] PCI: Using ACPI for IRQ routing [ 0.335464] PCI: pci_cache_line_size set to 64 bytes [ 0.335919] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.335921] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.335922] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff] [ 0.335923] e820: reserve RAM buffer [mem 0x8c757018-0x8fffffff] [ 0.335924] e820: reserve RAM buffer [mem 0x9be36000-0x9bffffff] [ 0.335924] e820: reserve RAM buffer [mem 0xa064a000-0xa3ffffff] [ 0.335925] e820: reserve RAM buffer [mem 0xb4419000-0xb7ffffff] [ 0.335926] e820: reserve RAM buffer [mem 0x40e300000-0x40fffffff] [ 0.335947] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.335947] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.335947] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.335947] vgaarb: loaded [ 0.335947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.335947] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.337386] clocksource: Switched to clocksource tsc-early [ 0.342485] VFS: Disk quotas dquot_6.6.0 [ 0.342496] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.342588] AppArmor: AppArmor Filesystem Enabled [ 0.342625] pnp: PnP ACPI init [ 0.342909] system 00:01: [io 0x0400-0x04cf] has been reserved [ 0.342912] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.342913] system 00:01: [io 0x04d6] has been reserved [ 0.342914] system 00:01: [io 0x0680-0x06ff] has been reserved [ 0.342915] system 00:01: [io 0x077a] has been reserved [ 0.342916] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.342917] system 00:01: [io 0x0c14] has been reserved [ 0.342918] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.342918] system 00:01: [io 0x0c6c] has been reserved [ 0.342919] system 00:01: [io 0x0c6f] has been reserved [ 0.342920] system 00:01: [io 0x0cd0-0x0cdb] has been reserved [ 0.342921] system 00:01: [io 0x0840-0x0847] has been reserved [ 0.342982] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.343053] system 00:04: [io 0x0200-0x027f] has been reserved [ 0.343055] system 00:04: [mem 0xfedf1000-0xfedf1fff] has been reserved [ 0.343133] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.343135] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.343136] system 00:05: [mem 0xfec20000-0xfec20fff] has been reserved [ 0.343917] pnp: PnP ACPI: found 6 devices [ 0.349126] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.349193] NET: Registered PF_INET protocol family [ 0.349506] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.351555] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.351595] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.351752] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.352074] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.352183] TCP: Hash tables configured (established 131072 bind 65536) [ 0.352291] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.352337] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.352381] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.352428] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.352438] NET: Registered PF_XDP protocol family [ 0.352448] pci 0000:00:01.3: PCI bridge to [bus 01] [ 0.352451] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff] [ 0.352454] pci 0000:00:01.3: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.352458] pci 0000:00:02.4: PCI bridge to [bus 02] [ 0.352461] pci 0000:00:02.4: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.352465] pci 0000:00:08.1: PCI bridge to [bus 03] [ 0.352466] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] [ 0.352469] pci 0000:00:08.1: bridge window [mem 0xfb000000-0xfb3fffff] [ 0.352470] pci 0000:00:08.1: bridge window [mem 0x460000000-0x4701fffff 64bit pref] [ 0.352474] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.352475] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.352476] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.352477] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window] [ 0.352478] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window] [ 0.352478] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xefffffff window] [ 0.352479] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfeafffff window] [ 0.352480] pci_bus 0000:00: resource 11 [mem 0x40e300000-0x42fffffff window] [ 0.352481] pci_bus 0000:00: resource 12 [mem 0x450200000-0xfd01ffffff window] [ 0.352482] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.352482] pci_bus 0000:01: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.352483] pci_bus 0000:02: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.352484] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.352485] pci_bus 0000:03: resource 1 [mem 0xfb000000-0xfb3fffff] [ 0.352485] pci_bus 0000:03: resource 2 [mem 0x460000000-0x4701fffff 64bit pref] [ 0.352926] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 0.352931] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec [ 0.353093] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec [ 0.353153] PCI: CLS 0 bytes, default 64 [ 0.353164] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.353190] Trying to unpack rootfs image as initramfs... [ 0.353204] pci 0000:00:01.0: Adding to iommu group 0 [ 0.353211] pci 0000:00:01.3: Adding to iommu group 1 [ 0.353218] pci 0000:00:02.0: Adding to iommu group 2 [ 0.353225] pci 0000:00:02.4: Adding to iommu group 3 [ 0.353234] pci 0000:00:08.0: Adding to iommu group 4 [ 0.353240] pci 0000:00:08.1: Adding to iommu group 5 [ 0.353248] pci 0000:00:14.0: Adding to iommu group 6 [ 0.353253] pci 0000:00:14.3: Adding to iommu group 6 [ 0.353269] pci 0000:00:18.0: Adding to iommu group 7 [ 0.353274] pci 0000:00:18.1: Adding to iommu group 7 [ 0.353279] pci 0000:00:18.2: Adding to iommu group 7 [ 0.353284] pci 0000:00:18.3: Adding to iommu group 7 [ 0.353289] pci 0000:00:18.4: Adding to iommu group 7 [ 0.353294] pci 0000:00:18.5: Adding to iommu group 7 [ 0.353300] pci 0000:00:18.6: Adding to iommu group 7 [ 0.353306] pci 0000:00:18.7: Adding to iommu group 7 [ 0.353313] pci 0000:01:00.0: Adding to iommu group 8 [ 0.353320] pci 0000:02:00.0: Adding to iommu group 9 [ 0.353338] pci 0000:03:00.0: Adding to iommu group 10 [ 0.353347] pci 0000:03:00.1: Adding to iommu group 11 [ 0.353355] pci 0000:03:00.2: Adding to iommu group 12 [ 0.353362] pci 0000:03:00.3: Adding to iommu group 13 [ 0.353370] pci 0000:03:00.4: Adding to iommu group 14 [ 0.353378] pci 0000:03:00.5: Adding to iommu group 15 [ 0.353386] pci 0000:03:00.6: Adding to iommu group 16 [ 0.355568] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.355570] pci 0000:00:00.2: PCI INT A: not connected [ 0.356042] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.356044] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.356049] AMD-Vi: Interrupt remapping enabled [ 0.356050] AMD-Vi: X2APIC enabled [ 0.579056] Freeing initrd memory: 67800K [ 0.608413] AMD-Vi: Virtual APIC enabled [ 0.608539] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.608543] software IO TLB: mapped [mem 0x00000000c4000000-0x00000000c8000000] (64MB) [ 0.608588] LVT offset 0 assigned for vector 0x400 [ 0.608648] perf: AMD IBS detected (0x000003ff) [ 0.608652] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.609039] Initialise system trusted keyrings [ 0.609049] Key type blacklist registered [ 0.609067] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.609076] zbud: loaded [ 0.609210] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.609246] fuse: init (API version 7.38) [ 0.609332] integrity: Platform Keyring initialized [ 0.609335] integrity: Machine keyring initialized [ 0.611825] Key type asymmetric registered [ 0.611826] Asymmetric key parser 'x509' registered [ 0.611843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.611896] io scheduler mq-deadline registered [ 0.613398] pcieport 0000:00:01.3: PME: Signaling with IRQ 34 [ 0.613545] pcieport 0000:00:02.4: PME: Signaling with IRQ 35 [ 0.613665] pcieport 0000:00:08.1: PME: Signaling with IRQ 36 [ 0.613735] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.613957] ACPI: AC: AC Adapter [AC] (on-line) [ 0.613988] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.613999] ACPI: button: Power Button [PWRB] [ 0.614017] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.614025] ACPI: button: Sleep Button [SLPB] [ 0.614039] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.614046] ACPI: button: Lid Switch [LID] [ 0.614063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.614086] ACPI: button: Power Button [PWRF] [ 0.614143] Estimated ratio of average max frequency by base frequency (times 1024): 1466 [ 0.614153] Monitor-Mwait will be used to enter C-1 state [ 0.614156] ACPI: \_SB_.PLTF.C000: Found 3 idle states [ 0.614253] ACPI: \_SB_.PLTF.C001: Found 3 idle states [ 0.614314] ACPI: \_SB_.PLTF.C002: Found 3 idle states [ 0.614398] ACPI: \_SB_.PLTF.C003: Found 3 idle states [ 0.614489] ACPI: \_SB_.PLTF.C004: Found 3 idle states [ 0.614580] ACPI: \_SB_.PLTF.C005: Found 3 idle states [ 0.614676] ACPI: \_SB_.PLTF.C006: Found 3 idle states [ 0.614754] ACPI: \_SB_.PLTF.C007: Found 3 idle states [ 0.614810] ACPI: \_SB_.PLTF.C008: Found 3 idle states [ 0.614869] ACPI: \_SB_.PLTF.C009: Found 3 idle states [ 0.614941] ACPI: \_SB_.PLTF.C00A: Found 3 idle states [ 0.615018] ACPI: \_SB_.PLTF.C00B: Found 3 idle states [ 0.616934] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.616936] ACPI: thermal: Thermal Zone [CPUZ] (35 C) [ 0.618000] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.618001] ACPI: thermal: Thermal Zone [GFXZ] (25 C) [ 0.619060] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.619061] ACPI: thermal: Thermal Zone [EXTZ] (31 C) [ 0.620110] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.620111] ACPI: thermal: Thermal Zone [LOCZ] (34 C) [ 0.621180] ACPI: \_TZ_.BATZ: Invalid passive threshold [ 0.621908] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.621909] ACPI: thermal: Thermal Zone [BATZ] (26 C) [ 0.622255] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20221020/exoparg2-393) [ 0.622261] fbcon: Taking over console [ 0.622269] Initialized Local Variables for Method [GTTP]: [ 0.622269] Local1: 0000000027002385 <Obj> Integer 0000000000000024 [ 0.622273] Local2: 0000000026d9b018 <Obj> Integer 0000000000000024 [ 0.622275] Initialized Arguments for Method [GTTP]: (5 arguments defined for method invocation) [ 0.622276] Arg0: 00000000f76d3dad <Obj> Integer 0000000000000005 [ 0.622278] Arg1: 00000000d0b52927 <Obj> Integer 0000000000000006 [ 0.622279] Arg2: 000000000877b684 <Obj> Integer 0000000000000010 [ 0.622281] Arg3: 000000007e55ba43 <Obj> Integer 0000000000000000 [ 0.622283] Arg4: 00000000b5ddd03e <Obj> Integer 000000000000007F [ 0.622285] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20221020/psparse-529) [ 0.622289] ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20221020/psparse-529) [ 0.622631] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20221020/exoparg2-393) [ 0.622638] Initialized Local Variables for Method [GTTP]: [ 0.622639] Local1: 000000006753542f <Obj> Integer 0000000000000024 [ 0.622641] Local2: 0000000027002385 <Obj> Integer 0000000000000024 [ 0.622643] Initialized Arguments for Method [GTTP]: (5 arguments defined for method invocation) [ 0.622644] Arg0: 00000000f76d3dad <Obj> Integer 0000000000000005 [ 0.622645] Arg1: 00000000d0b52927 <Obj> Integer 0000000000000006 [ 0.622647] Arg2: 000000007e55ba43 <Obj> Integer 0000000000000010 [ 0.622648] Arg3: 00000000f746d250 <Obj> Integer 0000000000000000 [ 0.622650] Arg4: 000000000877b684 <Obj> Integer 000000000000007F [ 0.622652] ACPI Error: Aborting method \_TZ.GTTP due to previous error (AE_AML_PACKAGE_LIMIT) (20221020/psparse-529) [ 0.622656] ACPI Error: Aborting method \_TZ.CHGZ._TMP due to previous error (AE_AML_PACKAGE_LIMIT) (20221020/psparse-529) [ 0.622781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.625768] Linux agpgart interface v0.103 [ 0.629176] ACPI: battery: Slot [BAT0] (battery present) [ 0.635999] tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22) [ 0.728362] loop: module loaded [ 0.728543] tun: Universal TUN/TAP device driver, 1.6 [ 0.728561] PPP generic driver version 2.4.2 [ 0.728634] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 [ 0.728636] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.728987] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.729053] mousedev: PS/2 mouse device common for all mice [ 0.729131] rtc_cmos 00:00: RTC can wake from S4 [ 0.729329] rtc_cmos 00:00: registered as rtc0 [ 0.729360] rtc_cmos 00:00: setting system clock to 2023-09-19T09:17:44 UTC (1695115064) [ 0.729382] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.729388] i2c_dev: i2c /dev entries driver [ 0.729436] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.729446] device-mapper: uevent: version 1.0.3 [ 0.729465] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.729476] platform eisa.0: Probing EISA bus 0 [ 0.729477] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.729478] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.729479] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.729480] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.729480] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.729481] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.729481] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.729482] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.729482] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.729483] platform eisa.0: EISA: Detected 0 cards [ 0.729676] ledtrig-cpu: registered to indicate activity on CPUs [ 0.729696] efifb: probing for efifb [ 0.729818] efifb: showing boot graphics [ 0.731382] efifb: framebuffer at 0x460000000, using 8100k, total 8100k [ 0.731383] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.731383] efifb: scrolling: redraw [ 0.731384] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.731438] Console: switching to colour frame buffer device 240x67 [ 0.732632] fb0: EFI VGA frame buffer device [ 0.732694] drop_monitor: Initializing network drop monitor service [ 0.740111] NET: Registered PF_INET6 protocol family [ 0.744370] Segment Routing with IPv6 [ 0.744375] In-situ OAM (IOAM) with IPv6 [ 0.744394] NET: Registered PF_PACKET protocol family [ 0.744427] Key type dns_resolver registered [ 0.745062] microcode: CPU1: patch_level=0x0a50000c [ 0.745062] microcode: CPU3: patch_level=0x0a50000c [ 0.745062] microcode: CPU2: patch_level=0x0a50000c [ 0.745065] microcode: CPU0: patch_level=0x0a50000c [ 0.745075] microcode: CPU6: patch_level=0x0a50000c [ 0.745075] microcode: CPU5: patch_level=0x0a50000c [ 0.745075] microcode: CPU4: patch_level=0x0a50000c [ 0.745075] microcode: CPU7: patch_level=0x0a50000c [ 0.745078] microcode: CPU9: patch_level=0x0a50000c [ 0.745078] microcode: CPU8: patch_level=0x0a50000c [ 0.745080] microcode: CPU11: patch_level=0x0a50000c [ 0.745080] microcode: CPU10: patch_level=0x0a50000c [ 0.745087] microcode: Microcode Update Driver: v2.2. [ 0.745237] resctrl: L3 allocation detected [ 0.745239] resctrl: MB allocation detected [ 0.745240] resctrl: L3 monitoring detected [ 0.745243] IPI shorthand broadcast: enabled [ 0.745938] sched_clock: Marking stable (745215764, 371301)->(754594609, -9007544) [ 0.746160] registered taskstats version 1 [ 0.746404] Loading compiled-in X.509 certificates [ 0.746729] Loaded X.509 cert 'Build time autogenerated kernel key: 17ded95d03917717f30999a429e6576b4149913b' [ 0.747006] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.747288] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.747289] blacklist: Loading compiled-in revocation X.509 certificates [ 0.747299] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.747307] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.747314] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.747322] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.747329] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.747339] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.747346] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.747354] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.747864] zswap: loaded using pool lzo/zbud [ 0.748736] Key type .fscrypt registered [ 0.748737] Key type fscrypt-provisioning registered [ 0.748849] Key type trusted registered [ 0.750487] Key type encrypted registered [ 0.750488] AppArmor: AppArmor sha1 policy hashing enabled [ 0.751109] integrity: Loading X.509 certificate: UEFI:db [ 0.751123] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.751124] integrity: Loading X.509 certificate: UEFI:db [ 0.751133] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.751134] integrity: Loading X.509 certificate: UEFI:db [ 0.751143] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.751611] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.751730] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.751733] Loading compiled-in module X.509 certificates [ 0.752016] Loaded X.509 cert 'Build time autogenerated kernel key: 17ded95d03917717f30999a429e6576b4149913b' [ 0.752017] ima: Allocated hash algorithm: sha1 [ 0.755128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.897791] evm: Initialising EVM extended attributes: [ 0.897797] evm: security.selinux [ 0.897799] evm: security.SMACK64 [ 0.897801] evm: security.SMACK64EXEC [ 0.897802] evm: security.SMACK64TRANSMUTE [ 0.897803] evm: security.SMACK64MMAP [ 0.897805] evm: security.apparmor [ 0.897807] evm: security.ima [ 0.897808] evm: security.capability [ 0.897809] evm: HMAC attrs: 0x1 [ 0.898402] PM: Magic number: 7:120:273 [ 0.898464] tty tty10: hash matches [ 0.898473] net lo: hash matches [ 0.899475] RAS: Correctable Errors collector initialized. [ 0.899493] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 0.900937] Freeing unused decrypted memory: 2036K [ 0.901387] Freeing unused kernel image (initmem) memory: 4764K [ 0.925659] Write protecting the kernel read-only data: 34816k [ 0.926246] Freeing unused kernel image (rodata/data gap) memory: 1624K [ 0.973762] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.973771] Run /init as init process [ 0.973772] with arguments: [ 0.973773] /init [ 0.973774] splash [ 0.973775] with environment: [ 0.973775] HOME=/ [ 0.973776] TERM=linux [ 0.973776] BOOT_IMAGE=/boot/vmlinuz-6.2.0-32-generic [ 1.027071] hid: raw HID events driver (C) Jiri Kosina [ 1.110207] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\_SB.PCI0.SMBS.SMBO) (20221020/utaddress-204) [ 1.110216] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.132929] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.133229] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:00/input/input5 [ 1.142000] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 1.142006] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1 [ 1.142195] xhci_hcd 0000:03:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410 [ 1.142683] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 1.142685] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2 [ 1.142687] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.142715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.142717] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.142717] usb usb1: Product: xHCI Host Controller [ 1.142718] usb usb1: Manufacturer: Linux 6.2.0-32-generic xhci-hcd [ 1.142719] usb usb1: SerialNumber: ... [ 1.142798] hub 1-0:1.0: USB hub found [ 1.142806] hub 1-0:1.0: 4 ports detected [ 1.143292] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.143303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.143304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.143305] usb usb2: Product: xHCI Host Controller [ 1.143305] usb usb2: Manufacturer: Linux 6.2.0-32-generic xhci-hcd [ 1.143306] usb usb2: SerialNumber: ... [ 1.143349] hub 2-0:1.0: USB hub found [ 1.143354] hub 2-0:1.0: 2 ports detected [ 1.143684] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 1.143688] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3 [ 1.143790] xhci_hcd 0000:03:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410 [ 1.144245] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 1.144247] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4 [ 1.144249] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.144280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.144281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.144282] usb usb3: Product: xHCI Host Controller [ 1.144283] usb usb3: Manufacturer: Linux 6.2.0-32-generic xhci-hcd [ 1.144283] usb usb3: SerialNumber: ... [ 1.144336] hub 3-0:1.0: USB hub found [ 1.144343] hub 3-0:1.0: 4 ports detected [ 1.144814] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.144824] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.144825] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.144826] usb usb4: Product: xHCI Host Controller [ 1.144826] usb usb4: Manufacturer: Linux 6.2.0-32-generic xhci-hcd [ 1.144827] usb usb4: SerialNumber: ... [ 1.144868] hub 4-0:1.0: USB hub found [ 1.144874] hub 4-0:1.0: 2 ports detected [ 1.152714] nvme 0000:02:00.0: platform quirk: setting simple suspend [ 1.152754] nvme nvme0: pci function 0000:02:00.0 [ 1.166676] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.175434] nvme nvme0: 16/0/0 default/read/poll queues [ 1.177968] nvme0n1: p1 p2 [ 1.306274] input: SYNA30D2:00 06CB:CE08 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-SYNA30D2:00/0018:06CB:CE08.0001/input/input6 [ 1.306340] input: SYNA30D2:00 06CB:CE08 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-SYNA30D2:00/0018:06CB:CE08.0001/input/input8 [ 1.306403] hid-generic 0018:06CB:CE08.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA30D2:00 06CB:CE08] on i2c-SYNA30D2:00 [ 1.400893] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 1.404391] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 1.439438] EXT4-fs (nvme0n1p2): mounted filesystem HASH_66F-920A-06EE-7E17-93281A6A2D34 with ordered data mode. Quota mode: none. [ 1.506721] systemd[1]: Inserted module 'autofs4' [ 1.569414] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [ 1.569418] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.569420] usb 3-2: Product: USB-Serial Controller D [ 1.569421] usb 3-2: Manufacturer: Prolific Technology Inc. [ 1.587488] systemd[1]: systemd 249.11-0ubuntu3.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1.587563] systemd[1]: Detected architecture x86-64. [ 1.587748] usb 1-2: New USB device found, idVendor=05e0, idProduct=1200, bcdDevice= 0.07 [ 1.587752] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.587754] usb 1-2: Product: Symbol Bar Code Scanner::EA [ 1.587756] usb 1-2: Manufacturer: Symbol Technologies, Inc, 2008 [ 1.587757] usb 1-2: SerialNumber: ... [ 1.587969] systemd[1]: Hostname set to ... [ 1.589249] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 1.632424] tsc: Refined TSC clocksource calibration: 2299.520 MHz [ 1.632435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21256fbaad4, max_idle_ns: 440795207018 ns [ 1.632721] clocksource: Switched to clocksource tsc [ 1.676844] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \xe2\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 1.692805] systemd[1]: /etc/systemd/system/greengrass.service:7: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring. [ 1.692811] systemd[1]: /etc/systemd/system/greengrass.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/greengrassd.pid \xe2\x86\x92 /run/greengrassd.pid; please update the unit file accordingly. [ 1.708389] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.709418] systemd[1]: Queued start job for default target Graphical Interface. [ 1.724638] usb 1-3: new full-speed USB device number 3 using xhci_hcd [ 1.765494] systemd[1]: Created slice Slice /system/modprobe. [ 1.765898] systemd[1]: Created slice Slice /system/systemd-fsck. [ 1.766012] systemd[1]: Created slice User and Session Slice. [ 1.766077] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.766227] systemd[1]: Set up automount ... [ 1.766272] systemd[1]: Reached target User and Group Name Lookups. [ 1.766282] systemd[1]: Reached target Remote File Systems. [ 1.766288] systemd[1]: Reached target Slice Units. [ 1.766298] systemd[1]: Reached target Mounting snaps. [ 1.766316] systemd[1]: Reached target Local Verity Protected Volumes. [ 1.766525] systemd[1]: Listening on Syslog Socket. [ 1.766583] systemd[1]: Listening on fsck to fsckd communication Socket. [ 1.766617] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 1.766721] systemd[1]: Listening on Journal Audit Socket. [ 1.766772] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.766830] systemd[1]: Listening on Journal Socket. [ 1.766970] systemd[1]: Listening on udev Control Socket. [ 1.767015] systemd[1]: Listening on udev Kernel Socket. [ 1.767486] systemd[1]: Mounting Huge Pages File System... [ 1.768333] systemd[1]: Mounting POSIX Message Queue File System... [ 1.768821] systemd[1]: Mounting Kernel Debug File System... [ 1.769259] systemd[1]: Mounting Kernel Trace File System... [ 1.770653] systemd[1]: Starting Journal Service... [ 1.771159] systemd[1]: Starting Set the console keyboard layout... [ 1.771614] systemd[1]: Starting Create List of Static Device Nodes... [ 1.772058] systemd[1]: Starting Load Kernel Module configfs... [ 1.772513] systemd[1]: Starting Load Kernel Module drm... [ 1.773029] systemd[1]: Starting Load Kernel Module efi_pstore... [ 1.773483] systemd[1]: Starting Load Kernel Module fuse... [ 1.773593] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 1.774424] systemd[1]: Starting Load Kernel Modules... [ 1.774893] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.775343] systemd[1]: Starting Coldplug All udev Devices... [ 1.776069] systemd[1]: Mounted Huge Pages File System. [ 1.776130] systemd[1]: Mounted POSIX Message Queue File System. [ 1.776179] systemd[1]: Mounted Kernel Debug File System. [ 1.776222] systemd[1]: Mounted Kernel Trace File System. [ 1.776450] systemd[1]: Finished Create List of Static Device Nodes. [ 1.776625] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.776755] systemd[1]: Finished Load Kernel Module configfs. [ 1.776879] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.776992] systemd[1]: Finished Load Kernel Module fuse. [ 1.777486] systemd[1]: Mounting FUSE Control File System... [ 1.777969] systemd[1]: Mounting Kernel Configuration File System... [ 1.778802] EXT4-fs (nvme0n1p2): re-mounted HASH_66F-920A-06EE-7E17-93281A6A2D34. Quota mode: none. [ 1.779337] systemd[1]: Finished Remount Root and Kernel File Systems. [ 1.779434] systemd[1]: Mounted FUSE Control File System. [ 1.779479] systemd[1]: Mounted Kernel Configuration File System. [ 1.780120] systemd[1]: Activating swap /swapfile... [ 1.780252] pstore: Using crash dump compression: deflate [ 1.783092] systemd[1]: Starting Load/Save Random Seed... [ 1.786177] systemd[1]: Starting Create System Users... [ 1.790752] Adding 2097148k swap on /swapfile. Priority:-2 extents:8 across:4055040k SSFS [ 1.794564] systemd[1]: Activated swap /swapfile. [ 1.795098] systemd[1]: Reached target Swaps. [ 1.810856] systemd[1]: Finished Load/Save Random Seed. [ 1.811932] pstore: Registered efi_pstore as persistent store backend [ 1.811996] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 1.812368] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.812612] systemd[1]: Finished Load Kernel Module efi_pstore. [ 1.812707] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 1.813037] systemd[1]: Finished Create System Users. [ 1.813594] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.814308] lp: driver loaded but no devices found [ 1.818697] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.820689] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 1.823202] ACPI: bus type drm_connector registered [ 1.823840] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.824028] systemd[1]: Finished Load Kernel Module drm. [ 1.825802] systemd[1]: Started Journal Service. [ 1.829054] systemd-journald[304]: Received client request to flush runtime journal. [ 1.829130] ppdev: user-space parallel port driver [ 1.835020] loop0: detected capacity change from 0 to 8 [ 1.835332] loop1: detected capacity change from 0 to 129944 [ 1.836284] loop2: detected capacity change from 0 to 129976 [ 1.837144] loop3: detected capacity change from 0 to 151248 [ 1.837770] loop4: detected capacity change from 0 to 151352 [ 1.838576] loop5: detected capacity change from 0 to 492776 [ 1.838974] loop6: detected capacity change from 0 to 485192 [ 1.839634] loop7: detected capacity change from 0 to 716168 [ 1.840504] loop8: detected capacity change from 0 to 716176 [ 1.841300] loop9: detected capacity change from 0 to 955472 [ 1.842775] loop11: detected capacity change from 0 to 187776 [ 1.842803] loop10: detected capacity change from 0 to 994336 [ 1.843102] loop12: detected capacity change from 0 to 94064 [ 1.844551] loop13: detected capacity change from 0 to 25240 [ 1.844676] loop14: detected capacity change from 0 to 109072 [ 1.845411] loop15: detected capacity change from 0 to 83648 [ 1.846281] loop16: detected capacity change from 0 to 608 [ 1.847099] loop17: detected capacity change from 0 to 904 [ 1.884123] usb 3-4: New USB device found, idVendor=0408, idProduct=5374, bcdDevice= 0.06 [ 1.884129] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 1.884130] usb 3-4: Product: HP HD Camera [ 1.884131] usb 3-4: Manufacturer: Quanta [ 1.884132] usb 3-4: SerialNumber: ... [ 1.892313] usb 1-3: New USB device found, idVendor=0bda, idProduct=b00c, bcdDevice= 0.00 [ 1.892328] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.892329] usb 1-3: Product: 802.11ac WLAN Adapter [ 1.892331] usb 1-3: Manufacturer: Realtek [ 1.892333] usb 1-3: SerialNumber: ... [ 1.909224] input: Wireless hotkeys as /devices/virtual/input/input10 [ 1.935750] ccp 0000:03:00.2: enabling device (0000 -> 0002) [ 1.936356] ccp 0000:03:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 1.946602] ccp 0000:03:00.2: tee enabled [ 1.946607] ccp 0000:03:00.2: psp enabled [ 1.989644] usbcore: registered new interface driver usbserial_generic [ 1.989652] usbserial: USB Serial support registered for generic [ 1.989710] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 1.989711] RAPL PMU: hw unit of domain package 2^-16 Joules [ 2.026090] mc: Linux media interface: v0.10 [ 2.026467] usbcore: registered new interface driver pl2303 [ 2.026477] usbserial: USB Serial support registered for pl2303 [ 2.026509] pl2303 3-2:1.0: pl2303 converter detected [ 2.026785] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.026909] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.032383] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 2.036457] cryptd: max_cpu_qlen set to 1000 [ 2.052651] usb 3-2: pl2303 converter now attached to ttyUSB0 [ 2.062418] hp_wmi: query 0x4 returned error 0x5 [ 2.065455] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 2.112290] AVX2 version of gcm_enc/dec engaged. [ 2.112325] snd_rn_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002) [ 2.112347] AES CTR mode by8 optimization enabled [ 2.113303] videodev: Linux video capture interface: v2.00 [ 2.152201] input: SYNA30D2:00 06CB:CE08 as /devices/platform/AMDI0010:00/i2c-0/i2c-SYNA30D2:00/0018:06CB:CE08.0001/input/input12 [ 2.152260] input: SYNA30D2:00 06CB:CE08 as /devices/platform/AMDI0010:00/i2c-0/i2c-SYNA30D2:00/0018:06CB:CE08.0001/input/input13 [ 2.152302] input: SYNA30D2:00 06CB:CE08 as /devices/platform/AMDI0010:00/i2c-0/i2c-SYNA30D2:00/0018:06CB:CE08.0001/input/input15 [ 2.152347] hid-multitouch 0018:06CB:CE08.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA30D2:00 06CB:CE08] on i2c-SYNA30D2:00 [ 2.199797] usb 1-4: New USB device found, idVendor=06cb, idProduct=00f0, bcdDevice= 0.00 [ 2.199803] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.199805] usb 1-4: SerialNumber: ... [ 2.220812] usb 3-4: Found UVC 1.00 device HP HD Camera (0408:5374) [ 2.229648] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-4/3-4:1.0/input/input20 [ 2.229716] usbcore: registered new interface driver uvcvideo [ 2.243865] rtw_8822ce 0000:01:00.0: enabling device (0000 -> 0003) [ 2.244722] rtw_8822ce 0000:01:00.0: WOW Firmware version 9.9.4, H2C version 15 [ 2.244747] rtw_8822ce 0000:01:00.0: Firmware version 9.9.11, H2C version 15 [ 2.262831] input: Symbol Technologies, Inc, 2008 Symbol Bar Code Scanner::EA as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:05E0:1200.0002/input/input21 [ 2.269557] rtw_8822ce 0000:01:00.0 wlp1s0: renamed from wlan0 [ 2.322783] hid-generic 0003:05E0:1200.0002: input,hidraw1: USB HID v1.10 Keyboard [Symbol Technologies, Inc, 2008 Symbol Bar Code Scanner::EA] on usb-0000:03:00.3-2/input0 [ 2.346793] usbcore: registered new interface driver usbhid [ 2.346797] usbhid: USB HID core driver [ 2.393363] Bluetooth: Core ver 2.22 [ 2.393422] NET: Registered PF_BLUETOOTH protocol family [ 2.393423] Bluetooth: HCI device and connection manager initialized [ 2.393960] Bluetooth: HCI socket layer initialized [ 2.393966] Bluetooth: L2CAP socket layer initialized [ 2.393978] Bluetooth: SCO socket layer initialized [ 2.423585] SVM: TSC scaling supported [ 2.423592] kvm: Nested Virtualization enabled [ 2.423594] SVM: kvm: Nested Paging enabled [ 2.423611] SVM: Virtual VMLOAD VMSAVE supported [ 2.423612] SVM: Virtual GIF supported [ 2.423613] SVM: LBR virtualization supported [ 2.443403] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 2.453090] MCE: In-kernel MCE decoding enabled. [ 2.468156] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002) [ 2.471093] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002) [ 2.494536] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input22 [ 2.494868] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input23 [ 2.494937] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input24 [ 2.494987] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input25 [ 2.513826] usbcore: registered new interface driver btusb [ 2.515283] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 2.516266] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 2.516269] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 2.516828] intel_rapl_common: Found RAPL domain package [ 2.516830] intel_rapl_common: Found RAPL domain core [ 2.516869] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 2.516997] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35086 [ 2.534719] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC285: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.534723] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.534724] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.534725] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 2.534725] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 2.534726] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 2.534727] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 2.624390] clocksource: timekeeping watchdog on CPU4: Marking clocksource 'tsc' as unstable because the skew is too large: [ 2.624397] clocksource: 'hpet' wd_nsec: 476802079 wd_now: 229a384 wd_last: 1c177ca mask: ffffffff [ 2.624399] clocksource: 'tsc' cs_nsec: 476007046 cs_now: 589f1f0ce cs_last: 548b3db4b mask: ffffffffffffffff [ 2.624401] clocksource: 'tsc' is current clocksource. [ 2.624404] tsc: Marking TSC unstable due to clocksource watchdog [ 2.624415] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.624417] sched_clock: Marking unstable (2624044177, 371323)<-(2633422860, -9007544) [ 2.624488] clocksource: Checking clocksource tsc synchronization from CPU 0 to CPUs 1,5-6,9-10. [ 2.626327] clocksource: Switched to clocksource hpet [ 2.823120] Bluetooth: hci0: RTL: fw version 0x19b76d7d [ 2.929134] Bluetooth: hci0: AOSP extensions version v1.00 [ 2.929137] Bluetooth: hci0: AOSP quality report is supported [ 3.873744] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input26 [ 3.873841] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input27 [ 3.875448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.875453] Bluetooth: BNEP filters: protocol multicast [ 3.875461] Bluetooth: BNEP socket layer initialized [ 3.877122] Bluetooth: MGMT ver 1.22 [ 3.880885] [drm] amdgpu kernel modesetting enabled. [ 3.884727] NET: Registered PF_ALG protocol family [ 3.885106] amdgpu: Virtual CRAT table created for CPU [ 3.885115] amdgpu: Topology: Add CPU node [ 3.885374] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x103C:0x8895 0xD2). [ 3.885491] [drm] register mmio base: 0xFB300000 [ 3.885492] [drm] register mmio size: 524288 [ 3.886995] [drm] add ip block number 0 <soc15_common> [ 3.886997] [drm] add ip block number 1 <gmc_v9_0> [ 3.886998] [drm] add ip block number 2 <vega10_ih> [ 3.886999] [drm] add ip block number 3 <psp> [ 3.887000] [drm] add ip block number 4 <smu> [ 3.887001] [drm] add ip block number 5 <dm> [ 3.887001] [drm] add ip block number 6 <gfx_v9_0> [ 3.887002] [drm] add ip block number 7 <sdma_v4_0> [ 3.887003] [drm] add ip block number 8 <vcn_v2_0> [ 3.887004] [drm] add ip block number 9 <jpeg_v2_0> [ 3.887018] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT [ 3.887021] amdgpu: ATOM BIOS: SWBRT74353.001 [ 3.888204] [drm] VCN decode is enabled in VM mode [ 3.888205] [drm] VCN encode is enabled in VM mode [ 3.888205] [drm] JPEG decode is enabled in VM mode [ 3.888337] Console: switching to colour dummy device 80x25 [ 3.888404] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 3.888406] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 3.888408] amdgpu 0000:03:00.0: amdgpu: PCIE atomic ops is not supported [ 3.888416] amdgpu 0000:03:00.0: amdgpu: MODE2 reset [ 3.888770] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 3.888775] amdgpu 0000:03:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 3.888777] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 3.888778] amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 3.888783] [drm] Detected VRAM RAM=512M, BAR=512M [ 3.888783] [drm] RAM width 64bits DDR4 [ 3.888826] [drm] amdgpu: 512M of VRAM memory ready [ 3.888827] [drm] amdgpu: 7644M of GTT memory ready. [ 3.888837] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.888960] [drm] PCIE GART of 1024M enabled. [ 3.888961] [drm] PTB located at 0x000000F41FC00000 [ 3.889833] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist [ 3.889835] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist [ 3.890428] [drm] Loading DMUB firmware via PSP: version=0x0101001F [ 3.893496] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 3 [ 3.893506] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware [ 3.983398] loop18: detected capacity change from 0 to 8 [ 4.603944] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [ 4.691306] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 4.703016] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 4.703023] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 4.704446] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully! [ 4.705510] [drm] Display Core initialized with v3.2.215! [ 4.706148] [drm] DMUB hardware initialized: version=0x0101001F [ 4.727545] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 4.919490] [drm] kiq ring mec 2 pipe 1 q 0 [ 4.922727] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 4.922746] [drm] JPEG decode initialized successfully. [ 4.924582] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 4.924641] amdgpu: sdma_bitmap: 3 [ 4.966440] memmap_init_zone_device initialised 131072 pages in 0ms [ 4.966450] amdgpu: HMM registered 512MB device memory [ 4.966482] amdgpu: SRAT table not found [ 4.966483] amdgpu: Virtual CRAT table created for GPU [ 4.966764] amdgpu: Topology: Add dGPU node [0x1638:0x1002] [ 4.966766] kfd kfd: amdgpu: added device 1002:1638 [ 4.966808] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7 [ 4.966913] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 4.966915] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 4.966917] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 4.966918] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 4.966919] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 4.966920] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 4.966921] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 4.966923] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 4.966924] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 4.966925] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 4.966927] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 4.966928] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0 [ 4.966929] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 4.966930] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 4.966932] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 4.966933] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 4.966934] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 4.969300] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:03:00.0 on minor 0 [ 4.977695] fbcon: amdgpudrmfb (fb0) is primary device [ 4.977882] [drm] DSC precompute is not needed. [ 5.043788] Console: switching to colour frame buffer device 240x67 [ 5.061672] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 5.611656] Bluetooth: RFCOMM TTY layer initialized [ 5.611668] Bluetooth: RFCOMM socket layer initialized [ 5.611675] Bluetooth: RFCOMM ver 1.11 [ 6.389231] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 6.695833] rfkill: input handler disabled [ 7.963229] wlp1s0: authenticate with XXX [ 8.433951] wlp1s0: send auth to XXX (try 1/3) [ 8.437263] wlp1s0: authenticated [ 8.440398] wlp1s0: associate with XXX (try 1/3) [ 8.443772] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=16) [ 8.444079] wlp1s0: associated [ 8.481909] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 8.712530] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 3170.247569] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.250165] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.251050] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.310456] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.311281] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.314932] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.315105] wlp1s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 3170.315829] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.399171] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.402652] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3170.486071] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3171.452176] PM: suspend entry (s2idle) [ 3171.459179] Filesystems sync: 0.006 seconds [ 3171.459445] Freezing user space processes [ 3171.461099] Freezing user space processes completed (elapsed 0.001 seconds) [ 3171.461101] OOM killer disabled. [ 3171.461101] Freezing remaining freezable tasks [ 3171.462198] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 3171.462200] printk: Suspending console(s) (use no_console_suspend to debug) [ 3171.560158] atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug [ 3171.660353] ACPI: EC: interrupt blocked [ 3171.778356] ACPI: EC: interrupt unblocked [ 3171.806902] pci 0000:00:00.2: can't derive routing for PCI INT A [ 3171.806906] pci 0000:00:00.2: PCI INT A: no GSI [ 3171.808273] [drm] PCIE GART of 1024M enabled. [ 3171.808276] [drm] PTB located at 0x000000F41FC00000 [ 3171.808295] amdgpu 0000:03:00.0: amdgpu: SMU is resuming... [ 3171.809931] amdgpu 0000:03:00.0: amdgpu: dpm has been disabled [ 3171.810954] amdgpu 0000:03:00.0: amdgpu: SMU is resumed successfully! [ 3171.817747] nvme nvme0: 16/0/0 default/read/poll queues [ 3171.894032] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 3171.894123] [drm] JPEG decode initialized successfully. [ 3171.894385] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 3171.894388] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 3171.894390] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 3171.894391] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 3171.894392] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 3171.894392] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 3171.894394] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 3171.894394] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 3171.894395] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 3171.894396] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 3171.894397] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 3171.894397] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0 [ 3171.894398] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 3171.894399] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 3171.894400] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 3171.894400] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 3171.894401] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 3172.139748] usb 1-3: reset full-speed USB device number 3 using xhci_hcd [ 3174.746756] OOM killer enabled. [ 3174.746758] Restarting tasks ... [ 3174.746843] usb 3-2: USB disconnect, device number 2 [ 3174.747974] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 3174.747995] pl2303 3-2:1.0: device disconnected [ 3174.749569] done. [ 3174.749587] random: crng reseeded on system resumption [ 3174.751361] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 3174.752340] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 3174.752343] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 3174.752403] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 3174.752424] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35086 [ 3174.755116] PM: suspend exit [ 3175.059420] Bluetooth: hci0: RTL: fw version 0x19b76d7d [ 3175.165623] Bluetooth: hci0: AOSP extensions version v1.00 [ 3175.165633] Bluetooth: hci0: AOSP quality report is supported [ 3175.165752] Bluetooth: MGMT ver 1.22 [ 3179.073415] wlp1s0: authenticate with XXX [ 3179.396484] wlp1s0: send auth to XXX (try 1/3) [ 3179.399795] wlp1s0: authenticated [ 3179.400393] wlp1s0: associate with XXX (try 1/3) [ 3179.403044] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=16) [ 3179.403357] wlp1s0: associated [ 3179.448660] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 3179.660509] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 3524.832781] usb 3-2: new full-speed USB device number 4 using xhci_hcd [ 3524.997110] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [ 3524.997121] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3524.997124] usb 3-2: Product: USB-Serial Controller D [ 3524.997127] usb 3-2: Manufacturer: Prolific Technology Inc. [ 3525.003425] pl2303 3-2:1.0: pl2303 converter detected [ 3525.031379] usb 3-2: pl2303 converter now attached to ttyUSB0 [ 3807.695358] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.697544] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.698863] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.709890] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.746984] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.748107] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.750427] wlp1s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 3807.751007] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.751743] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.861648] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3807.948489] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 3808.906535] PM: suspend entry (s2idle) [ 3808.909896] Filesystems sync: 0.003 seconds [ 3808.910137] Freezing user space processes [ 3808.911898] Freezing user space processes completed (elapsed 0.001 seconds) [ 3808.911900] OOM killer disabled. [ 3808.911901] Freezing remaining freezable tasks [ 3808.913008] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 3808.913010] printk: Suspending console(s) (use no_console_suspend to debug) [ 3809.108837] ACPI: EC: interrupt blocked [ 3809.252121] Unable to read current time from RTC [ 3809.341586] ACPI: EC: interrupt unblocked [ 3809.368995] pci 0000:00:00.2: can't derive routing for PCI INT A [ 3809.369000] pci 0000:00:00.2: PCI INT A: no GSI [ 3809.370564] [drm] PCIE GART of 1024M enabled. [ 3809.370568] [drm] PTB located at 0x000000F41FC00000 [ 3809.370587] amdgpu 0000:03:00.0: amdgpu: SMU is resuming... [ 3809.371520] amdgpu 0000:03:00.0: amdgpu: dpm has been disabled [ 3809.373335] amdgpu 0000:03:00.0: amdgpu: SMU is resumed successfully! [ 3809.381015] nvme nvme0: 16/0/0 default/read/poll queues [ 3809.458154] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 3809.458368] [drm] JPEG decode initialized successfully. [ 3809.458623] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 3809.458626] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 3809.458627] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 3809.458629] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 3809.458630] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 3809.458630] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 3809.458631] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 3809.458632] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 3809.458633] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 3809.458634] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 3809.458634] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 3809.458635] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0 [ 3809.458636] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 3809.458637] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 3809.458638] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 3809.458638] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 3809.458639] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 3809.705229] usb 1-3: reset full-speed USB device number 3 using xhci_hcd [ 3809.870415] OOM killer enabled. [ 3809.870417] Restarting tasks ... done. [ 3809.874016] random: crng reseeded on system resumption [ 3809.874305] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 3809.876114] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 3809.876118] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 3809.876197] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 3809.876236] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35086 [ 3809.877980] PM: suspend exit [ 3810.184106] Bluetooth: hci0: RTL: fw version 0x19b76d7d [ 3810.290188] Bluetooth: hci0: AOSP extensions version v1.00 [ 3810.290197] Bluetooth: hci0: AOSP quality report is supported [ 3810.290324] Bluetooth: MGMT ver 1.22 [ 3814.267360] wlp1s0: authenticate with XXX [ 3814.584513] wlp1s0: send auth to XXX (try 1/3) [ 3814.588187] wlp1s0: authenticated [ 3814.596459] wlp1s0: associate with XXX (try 1/3) [ 3814.600269] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=17) [ 3814.600686] wlp1s0: associated [ 3814.657486] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 3814.812968] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 8624.332674] usb 1-2: USB disconnect, device number 2 [ 9854.788455] usb 1-2: new full-speed USB device number 5 using xhci_hcd [ 9854.972758] usb 1-2: New USB device found, idVendor=05e0, idProduct=1200, bcdDevice= 0.07 [ 9854.972769] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9854.972772] usb 1-2: Product: Symbol Bar Code Scanner::EA [ 9854.972775] usb 1-2: Manufacturer: Symbol Technologies, Inc, 2008 [ 9854.972777] usb 1-2: SerialNumber: ... [ 9854.999999] input: Symbol Technologies, Inc, 2008 Symbol Bar Code Scanner::EA as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:05E0:1200.0003/input/input28 [ 9855.057306] hid-generic 0003:05E0:1200.0003: input,hidraw1: USB HID v1.10 Keyboard [Symbol Technologies, Inc, 2008 Symbol Bar Code Scanner::EA] on usb-0000:03:00.3-2/input0 [26878.239872] wlp1s0: Connection to AP XXX lost [26882.415725] wlp1s0: authenticate with XXX [26882.906280] wlp1s0: send auth to XXX (try 1/3) [26882.909718] wlp1s0: authenticated [26882.936389] wlp1s0: associate with XXX (try 1/3) [26882.939697] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=16) [26882.940003] wlp1s0: associated [26883.029829] wlp1s0: Limiting TX power to 36 (36 - 0) dBm as advertised by XXX [74293.687401] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [92435.571628] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [92443.183122] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [92446.286613] wlp1s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [92449.512960] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [92456.969940] wlp1s0: authenticate with XXX [92457.438112] wlp1s0: send auth to XXX (try 1/3) [92457.441453] wlp1s0: authenticated [92457.444390] wlp1s0: associate with XXX (try 1/3) [92457.447978] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=16) [92457.448342] wlp1s0: associated [92457.480169] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [92457.684604] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [92457.937783] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [93299.323514] usb 3-2: USB disconnect, device number 4 [93299.323832] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [93299.323871] pl2303 3-2:1.0: device disconnected [93301.756677] usb 3-2: new full-speed USB device number 5 using xhci_hcd [93301.921231] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [93301.921242] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [93301.921245] usb 3-2: Product: USB-Serial Controller D [93301.921248] usb 3-2: Manufacturer: Prolific Technology Inc. [93301.926786] pl2303 3-2:1.0: pl2303 converter detected [93301.954698] usb 3-2: pl2303 converter now attached to ttyUSB0 [95282.849568] usb 3-2: USB disconnect, device number 5 [95282.849980] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [95282.849997] pl2303 3-2:1.0: device disconnected [95311.236669] usb 3-2: new full-speed USB device number 6 using xhci_hcd [95311.401281] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [95311.401293] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [95311.401297] usb 3-2: Product: USB-Serial Controller D [95311.401300] usb 3-2: Manufacturer: Prolific Technology Inc. [95311.407174] pl2303 3-2:1.0: pl2303 converter detected [95311.435293] usb 3-2: pl2303 converter now attached to ttyUSB0 [96793.480359] usb 3-2: USB disconnect, device number 6 [96793.480902] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [96793.480931] pl2303 3-2:1.0: device disconnected [96796.016505] usb 3-2: new full-speed USB device number 7 using xhci_hcd [96796.181305] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [96796.181315] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [96796.181318] usb 3-2: Product: USB-Serial Controller D [96796.181321] usb 3-2: Manufacturer: Prolific Technology Inc. [96796.187311] pl2303 3-2:1.0: pl2303 converter detected [96796.215290] usb 3-2: pl2303 converter now attached to ttyUSB0 [97635.542742] usb 3-2: USB disconnect, device number 7 [97635.542869] pl2303 ttyUSB0: error sending break = -19 [97635.543274] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [97635.543282] pl2303 3-2:1.0: device disconnected [97646.228397] usb 3-2: new full-speed USB device number 8 using xhci_hcd [97646.393484] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [97646.393490] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [97646.393492] usb 3-2: Product: USB-Serial Controller D [97646.393494] usb 3-2: Manufacturer: Prolific Technology Inc. [97646.398596] pl2303 3-2:1.0: pl2303 converter detected [97646.426621] usb 3-2: pl2303 converter now attached to ttyUSB0 [98085.212240] usb 3-2: USB disconnect, device number 8 [98085.212679] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [98085.212737] pl2303 3-2:1.0: device disconnected [98088.840851] usb 3-2: new full-speed USB device number 9 using xhci_hcd [98089.005534] usb 3-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [98089.005543] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [98089.005546] usb 3-2: Product: USB-Serial Controller D [98089.005548] usb 3-2: Manufacturer: Prolific Technology Inc. [98089.011618] pl2303 3-2:1.0: pl2303 converter detected [98089.039865] usb 3-2: pl2303 converter now attached to ttyUSB0 [98764.962880] Non-volatile memory driver v1.3 [98764.965252] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [98764.965261] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [98764.965840] Lockdown: hwinfo: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [98765.126906] st: Version 20160209, fixed bufsize 32768, s/g segs 256