[ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22 [ 0.000000] Linux version 5.0.0-13-generic (XXX@XXX) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #14-Ubuntu SMP Mon Apr 15 14:59:14 UTC 2019 (Ubuntu 5.0.0-13.14-generic 5.0.6) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a775dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a775e000-0x00000000a7abbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a7abc000-0x00000000aaa56fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaa57000-0x00000000aaab6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aaab7000-0x00000000aafd5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aafd6000-0x00000000ac413fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ac414000-0x00000000acee5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acee6000-0x00000000acffdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000acffe000-0x00000000acffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0xace2fc98 ACPI=0xab71c000 ACPI 2.0=0xab71c000 SMBIOS=0xf05b0 MPS=0xfd700 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2196.837 MHz processor [ 0.002494] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002496] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002504] last_pfn = 0x24f000 max_arch_pfn = 0x400000000 [ 0.002508] MTRR default type: uncachable [ 0.002509] MTRR fixed ranges enabled: [ 0.002510] 00000-9FFFF write-back [ 0.002511] A0000-BFFFF uncachable [ 0.002512] C0000-FFFFF write-protect [ 0.002513] MTRR variable ranges enabled: [ 0.002514] 0 base 0000000000 mask 7F80000000 write-back [ 0.002515] 1 base 0080000000 mask 7FE0000000 write-back [ 0.002516] 2 base 00A0000000 mask 7FF8000000 write-back [ 0.002517] 3 base 00A8000000 mask 7FFC000000 write-back [ 0.002518] 4 base 00AC000000 mask 7FFF000000 write-back [ 0.002519] 5 base 0100000000 mask 7F00000000 write-back [ 0.002519] 6 base 0200000000 mask 7F80000000 write-back [ 0.002520] 7 base 0260000000 mask 7FE0000000 uncachable [ 0.002521] 8 base 0250000000 mask 7FF0000000 uncachable [ 0.002522] 9 base 024F000000 mask 7FFF000000 uncachable [ 0.003376] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003525] total RAM covered: 8128M [ 0.003827] Found optimal setting for mtrr clean up [ 0.003828] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.004679] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved [ 0.004684] last_pfn = 0xacfff max_arch_pfn = 0x400000000 [ 0.013683] found SMP MP-table at [mem 0x000fd910-0x000fd91f] mapped at [(____ptrval____)] [ 0.013698] esrt: Reserving ESRT space from 0x00000000ace2fc98 to 0x00000000ace2fcd0. [ 0.013706] check: Scanning 1 areas for low memory corruption [ 0.013708] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.013711] Using GB pages for direct mapping [ 0.013713] BRK [0x1d3401000, 0x1d3401fff] PGTABLE [ 0.013715] BRK [0x1d3402000, 0x1d3402fff] PGTABLE [ 0.013716] BRK [0x1d3403000, 0x1d3403fff] PGTABLE [ 0.013743] BRK [0x1d3404000, 0x1d3404fff] PGTABLE [ 0.013745] BRK [0x1d3405000, 0x1d3405fff] PGTABLE [ 0.013866] BRK [0x1d3406000, 0x1d3406fff] PGTABLE [ 0.013892] BRK [0x1d3407000, 0x1d3407fff] PGTABLE [ 0.013929] BRK [0x1d3408000, 0x1d3408fff] PGTABLE [ 0.013967] BRK [0x1d3409000, 0x1d3409fff] PGTABLE [ 0.014040] BRK [0x1d340a000, 0x1d340afff] PGTABLE [ 0.014069] BRK [0x1d340b000, 0x1d340bfff] PGTABLE [ 0.014098] RAMDISK: [mem 0x32f3f000-0x35796fff] [ 0.014106] ACPI: Early table checksum verification disabled [ 0.014109] ACPI: RSDP 0x00000000AB71C000 000024 (v02 _ASUS_) [ 0.014113] ACPI: XSDT 0x00000000AB71C0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014118] ACPI: FACP 0x00000000AB7360F8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014123] ACPI: DSDT 0x00000000AB71C218 019EE0 (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.014126] ACPI: FACS 0x00000000AC411F80 000040 [ 0.014129] ACPI: APIC 0x00000000AB736208 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014132] ACPI: FPDT 0x00000000AB736290 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014134] ACPI: FIDT 0x00000000AB7362D8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014137] ACPI: ECDT 0x00000000AB736378 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.014140] ACPI: MCFG 0x00000000AB736440 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.014142] ACPI: HPET 0x00000000AB736480 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.014145] ACPI: SSDT 0x00000000AB7364B8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.014148] ACPI: UEFI 0x00000000AB7367D0 000042 (v01 00000000 00000000) [ 0.014151] ACPI: SSDT 0x00000000AB736818 000194 (v01 Intel zpodd 00001000 INTL 20120913) [ 0.014154] ACPI: ASF! 0x00000000AB7369B0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.014157] ACPI: SSDT 0x00000000AB736A50 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.014159] ACPI: SSDT 0x00000000AB736F90 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.014162] ACPI: TPM2 0x00000000AB737B08 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.014165] ACPI: SSDT 0x00000000AB737B40 000041 (v01 Ssdt PttSsdt 00001000 INTL 20120913) [ 0.014168] ACPI: SSDT 0x00000000AB737B88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.014170] ACPI: SSDT 0x00000000AB73ADD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.014173] ACPI: PCCT 0x00000000AB73B168 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.014176] ACPI: SSDT 0x00000000AB73B1D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.014179] ACPI: SSDT 0x00000000AB73BCA0 006B80 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.014181] ACPI: DMAR 0x00000000AB742820 0000B0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.014184] ACPI: BGRT 0x00000000AB7428D0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.014187] ACPI: MSDM 0x00000000AAAB5E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) [ 0.014196] ACPI: Local APIC address 0xfee00000 [ 0.014283] No NUMA configuration found [ 0.014284] Faking a node at [mem 0x0000000000000000-0x000000024effffff] [ 0.014295] NODE_DATA(0) allocated [mem 0x24efd5000-0x24effffff] [ 0.014521] Zone ranges: [ 0.014521] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014523] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.014524] Normal [mem 0x0000000100000000-0x000000024effffff] [ 0.014525] Device empty [ 0.014526] Movable zone start for each node [ 0.014529] Early memory node ranges [ 0.014530] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.014531] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.014532] node 0: [mem 0x0000000000100000-0x00000000a775dfff] [ 0.014532] node 0: [mem 0x00000000a7abc000-0x00000000aaa56fff] [ 0.014533] node 0: [mem 0x00000000aaab7000-0x00000000aafd5fff] [ 0.014534] node 0: [mem 0x00000000acffe000-0x00000000acffefff] [ 0.014534] node 0: [mem 0x0000000100000000-0x000000024effffff] [ 0.014890] Zeroed struct page in unavailable ranges: 21578 pages [ 0.014892] Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff] [ 0.014893] On node 0 totalpages: 2071478 [ 0.014894] DMA zone: 64 pages used for memmap [ 0.014895] DMA zone: 25 pages reserved [ 0.014896] DMA zone: 3997 pages, LIFO batch:0 [ 0.015001] DMA32 zone: 10865 pages used for memmap [ 0.015002] DMA32 zone: 695321 pages, LIFO batch:63 [ 0.034511] Normal zone: 21440 pages used for memmap [ 0.034513] Normal zone: 1372160 pages, LIFO batch:63 [ 0.069173] Reserving Intel graphics memory at [mem 0xae000000-0xafffffff] [ 0.069242] ACPI: PM-Timer IO Port: 0x1808 [ 0.069244] ACPI: Local APIC address 0xfee00000 [ 0.069251] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x18]) [ 0.069252] ACPI: NMI not connected to LINT 1! [ 0.069253] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0xf7]) [ 0.069253] ACPI: NMI not connected to LINT 1! [ 0.069254] ACPI: LAPIC_NMI (acpi_id[0x03] high res lint[0x0]) [ 0.069254] ACPI: NMI not connected to LINT 1! [ 0.069255] ACPI: LAPIC_NMI (acpi_id[0x04] dfl res lint[0x0]) [ 0.069255] ACPI: NMI not connected to LINT 1! [ 0.069266] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.069268] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.069269] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.069271] ACPI: IRQ0 used by override. [ 0.069272] ACPI: IRQ9 used by override. [ 0.069274] Using ACPI (MADT) for SMP configuration information [ 0.069275] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.069286] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.069306] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.069308] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.069309] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.069310] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.069311] PM: Registered nosave memory: [mem 0xa775e000-0xa7abbfff] [ 0.069313] PM: Registered nosave memory: [mem 0xaaa57000-0xaaab6fff] [ 0.069315] PM: Registered nosave memory: [mem 0xaafd6000-0xac413fff] [ 0.069315] PM: Registered nosave memory: [mem 0xac414000-0xacee5fff] [ 0.069316] PM: Registered nosave memory: [mem 0xacee6000-0xacffdfff] [ 0.069318] PM: Registered nosave memory: [mem 0xacfff000-0xad7fffff] [ 0.069318] PM: Registered nosave memory: [mem 0xad800000-0xafffffff] [ 0.069319] PM: Registered nosave memory: [mem 0xb0000000-0xf7ffffff] [ 0.069319] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.069320] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.069320] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.069321] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.069321] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.069322] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.069323] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.069323] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.069324] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.069324] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.069325] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.069327] [mem 0xb0000000-0xf7ffffff] available for PCI devices [ 0.069328] Booting paravirtualized kernel on bare hardware [ 0.069331] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.069339] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0 [ 0.069346] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.069599] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.069605] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.069606] pcpu-alloc: [0] 0 1 2 3 [ 0.069632] Built 1 zonelists, mobility grouping on. Total pages: 2039084 [ 0.069633] Policy zone: Normal [ 0.069634] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- [ 0.075372] Calgary: detecting Calgary via BIOS EBDA area [ 0.075374] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.096914] Memory: 7952660K/8285912K available (14339K kernel code, 2334K rwdata, 4292K rodata, 2576K init, 5204K bss, 333252K reserved, 0K cma-reserved) [ 0.097041] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.097047] Kernel/User page tables isolation: enabled [ 0.097062] ftrace: allocating 41532 entries in 163 pages [ 0.115614] rcu: Hierarchical RCU implementation. [ 0.115615] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.115616] Tasks RCU enabled. [ 0.115617] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.115618] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.118778] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.118981] Console: colour dummy device 80x25 [ 0.118985] printk: console [tty0] enabled [ 0.119001] ACPI: Core revision 20181213 [ 0.119292] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.119299] hpet clockevent registered [ 0.119304] APIC: Switch to symmetric I/O mode setup [ 0.119306] DMAR: Host address width 39 [ 0.119307] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.119312] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.119313] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.119316] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.119317] DMAR: RMRR base: 0x000000ace3f000 end: 0x000000ace4dfff [ 0.119318] DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff [ 0.119320] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.119321] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.119322] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.119322] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.119811] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.119812] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.120400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.139305] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1faa86f50d9, max_idle_ns: 440795268731 ns [ 0.139318] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.67 BogoMIPS (lpj=8787348) [ 0.139321] pid_max: default: 32768 minimum: 301 [ 0.141949] LSM: Security Framework initializing [ 0.141960] Yama: becoming mindful. [ 0.141977] AppArmor: AppArmor initialized [ 0.143156] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.143751] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.143784] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.143802] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.144035] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.144036] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.144041] mce: CPU supports 7 MCE banks [ 0.144052] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.144063] process: using mwait in idle threads [ 0.144065] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.144066] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.144068] Spectre V2 : Mitigation: Full generic retpoline [ 0.144069] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.144069] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.144076] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.144077] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.144078] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.144328] Freeing SMP alternatives memory: 36K [ 0.147378] TSC deadline timer enabled [ 0.147380] smpboot: CPU0: Intel(R) Core(TM) i3-5020U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.147483] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.147535] ... version: 3 [ 0.147535] ... bit width: 48 [ 0.147536] ... generic registers: 4 [ 0.147536] ... value mask: 0000ffffffffffff [ 0.147537] ... max period: 00007fffffffffff [ 0.147538] ... fixed-purpose events: 3 [ 0.147538] ... event mask: 000000070000000f [ 0.147574] rcu: Hierarchical SRCU implementation. [ 0.148222] random: crng done (trusting CPU's manufacturer) [ 0.148576] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.148625] smp: Bringing up secondary CPUs ... [ 0.148715] x86: Booting SMP configuration: [ 0.148717] .... node #0, CPUs: #1 #2 #3 [ 0.151904] smp: Brought up 1 node, 4 CPUs [ 0.151904] smpboot: Max logical packages: 1 [ 0.151904] smpboot: Total of 4 processors activated (17574.69 BogoMIPS) [ 0.155519] devtmpfs: initialized [ 0.155519] x86/mm: Memory block size: 128MB [ 0.156015] PM: Registering ACPI NVS region [mem 0xaafd6000-0xac413fff] (21225472 bytes) [ 0.156015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.156015] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.156015] pinctrl core: initialized pinctrl subsystem [ 0.156015] RTC time: 04:15:28, date: 2019-06-29 [ 0.156015] NET: Registered protocol family 16 [ 0.156015] EISA bus registered [ 0.156015] cpuidle: using governor ladder [ 0.156015] cpuidle: using governor menu [ 0.156015] Detected 1 PCC Subspaces [ 0.156015] Registering PCC driver as Mailbox controller [ 0.156015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.156015] ACPI: bus type PCI registered [ 0.156015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.156015] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.156015] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.156015] PCI: Using configuration type 1 for base access [ 0.156672] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.156672] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.156672] ACPI: Added _OSI(Module Device) [ 0.156672] ACPI: Added _OSI(Processor Device) [ 0.156672] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.156672] ACPI: Added _OSI(Processor Aggregator Device) [ 0.156672] ACPI: Added _OSI(Linux-Dell-Video) [ 0.156672] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.156672] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.195224] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.196825] ACPI: EC: EC started [ 0.196825] ACPI: EC: interrupt blocked [ 0.198859] ACPI: \: Used as first EC [ 0.198860] ACPI: \: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.198861] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.205238] ACPI: Dynamic OEM Table Load: [ 0.205245] ACPI: SSDT 0xFFFF91F444DB0800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.206052] ACPI: Dynamic OEM Table Load: [ 0.206058] ACPI: SSDT 0xFFFF91F444CFE800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.206923] ACPI: Dynamic OEM Table Load: [ 0.206927] ACPI: SSDT 0xFFFF91F444D45800 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.208690] ACPI: Interpreter enabled [ 0.208724] ACPI: (supports S0 S3 S4 S5) [ 0.208726] ACPI: Using IOAPIC for interrupt routing [ 0.208766] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.209515] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.213661] ACPI: Power Resource [PG00] (on) [ 0.214212] ACPI: Power Resource [PG01] (on) [ 0.214760] ACPI: Power Resource [PG02] (on) [ 0.229179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.229185] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.230159] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.230160] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.230999] PCI host bridge to bus 0000:00 [ 0.231001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.231003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.231004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.231005] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.231006] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.231013] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.231143] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.231155] pci 0000:00:02.0: reg 0x10: [mem 0xb1000000-0xb1ffffff 64bit] [ 0.231161] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.231165] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.231179] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.231310] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.231320] pci 0000:00:03.0: reg 0x10: [mem 0xb221c000-0xb221ffff 64bit] [ 0.231457] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.231469] pci 0000:00:04.0: reg 0x10: [mem 0xb2210000-0xb2217fff 64bit] [ 0.231619] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.231637] pci 0000:00:14.0: reg 0x10: [mem 0xb2200000-0xb220ffff 64bit] [ 0.231693] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.231801] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.231819] pci 0000:00:16.0: reg 0x10: [mem 0xb2225000-0xb222501f 64bit] [ 0.231877] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.232014] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.232032] pci 0000:00:1b.0: reg 0x10: [mem 0xb2218000-0xb221bfff 64bit] [ 0.232088] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.232214] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.232282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.232444] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.232514] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.232676] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.232746] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.232911] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.232931] pci 0000:00:1d.0: reg 0x10: [mem 0xb2223000-0xb22233ff] [ 0.233014] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.233130] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.233348] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.233363] pci 0000:00:1f.2: reg 0x10: [io 0x40b0-0x40b7] [ 0.233369] pci 0000:00:1f.2: reg 0x14: [io 0x40a0-0x40a3] [ 0.233375] pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097] [ 0.233381] pci 0000:00:1f.2: reg 0x1c: [io 0x4080-0x4083] [ 0.233386] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.233392] pci 0000:00:1f.2: reg 0x24: [mem 0xb2222000-0xb22227ff] [ 0.233427] pci 0000:00:1f.2: PME# supported from D3hot [ 0.233530] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.233545] pci 0000:00:1f.3: reg 0x10: [mem 0xb2221000-0xb22210ff 64bit] [ 0.233563] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.233689] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.233722] pci 0000:00:1f.6: reg 0x10: [mem 0xb2220000-0xb2220fff 64bit] [ 0.234010] acpiphp: Slot [1] registered [ 0.234014] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.234093] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.234123] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.234150] pci 0000:02:00.0: reg 0x18: [mem 0xb2104000-0xb2104fff 64bit] [ 0.234167] pci 0000:02:00.0: reg 0x20: [mem 0xb2100000-0xb2103fff 64bit] [ 0.234268] pci 0000:02:00.0: supports D1 D2 [ 0.234269] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.234432] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.234435] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.234437] pci 0000:00:1c.2: bridge window [mem 0xb2100000-0xb21fffff] [ 0.234527] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000 [ 0.234583] pci 0000:03:00.0: reg 0x10: [mem 0xb2000000-0xb207ffff 64bit] [ 0.234661] pci 0000:03:00.0: reg 0x30: [mem 0xb2080000-0xb208ffff pref] [ 0.234779] pci 0000:03:00.0: supports D1 D2 [ 0.234780] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.234958] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.234962] pci 0000:00:1c.3: bridge window [mem 0xb2000000-0xb20fffff] [ 0.236335] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236408] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.236480] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.236551] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.236621] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.236691] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 *14 15) [ 0.236761] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.236832] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15) [ 0.237464] ACPI: EC: interrupt unblocked [ 0.237464] ACPI: EC: event unblocked [ 0.237464] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.237464] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.237469] SCSI subsystem initialized [ 0.237469] libata version 3.00 loaded. [ 0.237469] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.237469] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.237469] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.237469] vgaarb: loaded [ 0.237469] ACPI: bus type USB registered [ 0.237469] usbcore: registered new interface driver usbfs [ 0.237469] usbcore: registered new interface driver hub [ 0.237469] usbcore: registered new device driver usb [ 0.237469] pps_core: LinuxPPS API ver. 1 registered [ 0.237469] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.237469] PTP clock support registered [ 0.237469] EDAC MC: Ver: 3.0.0 [ 0.237469] Registered efivars operations [ 0.239348] PCI: Using ACPI for IRQ routing [ 0.240572] PCI: pci_cache_line_size set to 64 bytes [ 0.240616] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.240617] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.240618] e820: reserve RAM buffer [mem 0xa775e000-0xa7ffffff] [ 0.240619] e820: reserve RAM buffer [mem 0xaaa57000-0xabffffff] [ 0.240620] e820: reserve RAM buffer [mem 0xaafd6000-0xabffffff] [ 0.240620] e820: reserve RAM buffer [mem 0xacfff000-0xafffffff] [ 0.240621] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff] [ 0.240721] NetLabel: Initializing [ 0.240722] NetLabel: domain hash size = 128 [ 0.240723] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.240737] NetLabel: unlabeled traffic allowed by default [ 0.240750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.240750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.243325] clocksource: Switched to clocksource tsc-early [ 0.254790] VFS: Disk quotas dquot_6.6.0 [ 0.254805] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.254920] AppArmor: AppArmor Filesystem Enabled [ 0.254949] pnp: PnP ACPI init [ 0.255210] system 00:00: [io 0x0240-0x0259] has been reserved [ 0.255215] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.255333] pnp 00:01: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.255383] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) [ 0.255503] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.255505] system 00:03: [io 0xffff] has been reserved [ 0.255506] system 00:03: [io 0xffff] has been reserved [ 0.255507] system 00:03: [io 0xffff] has been reserved [ 0.255508] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.255509] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.255513] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.255569] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.255615] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.255618] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.255844] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.255846] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.255847] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.255848] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.255850] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.255851] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.255852] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.255854] system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.255855] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.255856] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.255858] system 00:06: [mem 0xb0010000-0xb001ffff] has been reserved [ 0.255859] system 00:06: [mem 0xb0000000-0xb000ffff] has been reserved [ 0.255862] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.256464] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.257334] pnp: PnP ACPI: found 8 devices [ 0.263044] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.263068] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.263077] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.263079] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.263082] pci 0000:00:1c.2: bridge window [mem 0xb2100000-0xb21fffff] [ 0.263088] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.263092] pci 0000:00:1c.3: bridge window [mem 0xb2000000-0xb20fffff] [ 0.263099] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.263100] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.263101] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.263103] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 0.263104] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.263105] pci_bus 0000:02: resource 1 [mem 0xb2100000-0xb21fffff] [ 0.263106] pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb20fffff] [ 0.263279] NET: Registered protocol family 2 [ 0.263423] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.263451] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.263546] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.263655] TCP: Hash tables configured (established 65536 bind 65536) [ 0.263692] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.263714] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.263787] NET: Registered protocol family 1 [ 0.263791] NET: Registered protocol family 44 [ 0.263800] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.287428] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a6 took 22821 usecs [ 0.287448] PCI: CLS 64 bytes, default 64 [ 0.287486] Unpacking initramfs... [ 8.627156] Freeing initrd memory: 41312K [ 8.647340] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8.647342] software IO TLB: mapped [mem 0xa28af000-0xa68af000] (64MB) [ 8.647554] check: Scanning for low memory corruption every 60 seconds [ 8.649283] Initialise system trusted keyrings [ 8.649290] Key type blacklist registered [ 8.649322] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 8.650699] zbud: loaded [ 8.651143] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 8.651334] fuse init (API version 7.28) [ 8.688380] Key type asymmetric registered [ 8.688382] Asymmetric key parser 'x509' registered [ 8.688393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 8.688431] io scheduler mq-deadline registered [ 8.688800] pcieport 0000:00:1c.0: Signaling PME with IRQ 42 [ 8.689008] pcieport 0000:00:1c.2: Signaling PME with IRQ 43 [ 8.689184] pcieport 0000:00:1c.3: Signaling PME with IRQ 44 [ 8.689237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.689302] efifb: probing for efifb [ 8.689319] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k [ 8.689320] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 8.689321] efifb: scrolling: redraw [ 8.689322] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 8.690987] Console: switching to colour frame buffer device 128x48 [ 8.692557] fb0: EFI VGA frame buffer device [ 8.692565] intel_idle: MWAIT substates: 0x11142120 [ 8.692566] intel_idle: v0.4.1 model 0x3D [ 8.692809] intel_idle: lapic_timer_reliable_states 0xffffffff [ 8.693010] ACPI: AC Adapter [AC0] (on-line) [ 8.693096] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 8.693102] ACPI: Lid Switch [LID] [ 8.693130] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 8.693140] ACPI: Sleep Button [SLPB] [ 8.693169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.693175] ACPI: Power Button [PWRF] [ 8.694483] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.694484] ACPI: Thermal Zone [THRM] (44 C) [ 8.694663] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 8.698471] Linux agpgart interface v0.103 [ 8.705320] battery: ACPI: Battery Slot [BAT0] (battery present) [ 8.711048] loop: module loaded [ 8.711257] libphy: Fixed MDIO Bus: probed [ 8.711258] tun: Universal TUN/TAP device driver, 1.6 [ 8.711286] PPP generic driver version 2.4.2 [ 8.711333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.711335] ehci-pci: EHCI PCI platform driver [ 8.711531] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 8.711538] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 8.711548] ehci-pci 0000:00:1d.0: debug port 2 [ 8.715450] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 8.715466] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb2223000 [ 8.731363] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 8.731414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 8.731416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.731417] usb usb1: Product: EHCI Host Controller [ 8.731418] usb usb1: Manufacturer: Linux 5.0.0-13-generic ehci_hcd [ 8.731419] usb usb1: SerialNumber: ... [ 8.731540] hub 1-0:1.0: USB hub found [ 8.731545] hub 1-0:1.0: 2 ports detected [ 8.731695] ehci-platform: EHCI generic platform driver [ 8.731712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.731715] ohci-pci: OHCI PCI platform driver [ 8.731725] ohci-platform: OHCI generic platform driver [ 8.731733] uhci_hcd: USB Universal Host Controller Interface driver [ 8.731912] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.731916] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 8.732955] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 8.732958] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 8.733091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 8.733092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.733093] usb usb2: Product: xHCI Host Controller [ 8.733094] usb usb2: Manufacturer: Linux 5.0.0-13-generic xhci-hcd [ 8.733095] usb usb2: SerialNumber: ... [ 8.733185] hub 2-0:1.0: USB hub found [ 8.733199] hub 2-0:1.0: 11 ports detected [ 8.736761] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.736764] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 8.736766] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 8.736796] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 8.736798] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.736799] usb usb3: Product: xHCI Host Controller [ 8.736800] usb usb3: Manufacturer: Linux 5.0.0-13-generic xhci-hcd [ 8.736800] usb usb3: SerialNumber: ... [ 8.736889] hub 3-0:1.0: USB hub found [ 8.736896] hub 3-0:1.0: 4 ports detected [ 8.738581] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 8.742559] i8042: Detected active multiplexing controller, rev 1.1 [ 8.743786] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.743789] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 8.743813] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 8.743830] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 8.743847] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 8.743942] mousedev: PS/2 mouse device common for all mice [ 8.744070] rtc_cmos 00:04: RTC can wake from S4 [ 8.744213] rtc_cmos 00:04: registered as rtc0 [ 8.744228] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 8.744233] i2c /dev entries driver [ 8.744316] device-mapper: uevent: version 1.0.3 [ 8.744373] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 8.744393] platform eisa.0: Probing EISA bus 0 [ 8.744395] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 8.744396] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 8.744397] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 8.744398] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 8.744399] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 8.744400] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 8.744401] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 8.744401] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 8.744402] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 8.744403] platform eisa.0: EISA: Detected 0 cards [ 8.744410] intel_pstate: Intel P-state driver initializing [ 8.744585] ledtrig-cpu: registered to indicate activity on CPUs [ 8.744588] EFI Variables Facility v0.08 2004-May-17 [ 8.746745] NET: Registered protocol family 10 [ 8.752651] Segment Routing with IPv6 [ 8.752677] NET: Registered protocol family 17 [ 8.752716] Key type dns_resolver registered [ 8.752987] RAS: Correctable Errors collector initialized. [ 8.753019] microcode: sig=0x306d4, pf=0x40, revision=0x2b [ 8.753088] microcode: Microcode Update Driver: v2.2. [ 8.753098] sched_clock: Marking stable (8752736741, 347412)->(8755822529, -2738376) [ 8.753314] registered taskstats version 1 [ 8.753323] Loading compiled-in X.509 certificates [ 8.755079] Loaded X.509 cert 'Build time autogenerated kernel key: a91cf5411f714b0dcaaa6539e6139a929efd4f6a' [ 8.755225] Couldn't get size: 0x800000000000000e [ 8.755248] MODSIGN: Couldn't get UEFI db list [ 8.755342] Couldn't get size: 0x800000000000000e [ 8.755361] MODSIGN: Couldn't get UEFI MokListRT [ 8.755430] Couldn't get size: 0x800000000000000e [ 8.755448] MODSIGN: Couldn't get UEFI dbx list [ 8.755473] zswap: loaded using pool lzo/zbud [ 8.761834] Key type big_key registered [ 8.761839] Key type trusted registered [ 8.764894] Key type encrypted registered [ 8.764900] AppArmor: AppArmor sha1 policy hashing enabled [ 8.765228] ima: Allocated hash algorithm: sha1 [ 8.775668] No architecture policies found [ 8.775679] evm: Initialising EVM extended attributes: [ 8.775680] evm: security.selinux [ 8.775681] evm: security.SMACK64 [ 8.775681] evm: security.SMACK64EXEC [ 8.775682] evm: security.SMACK64TRANSMUTE [ 8.775682] evm: security.SMACK64MMAP [ 8.775683] evm: security.apparmor [ 8.775683] evm: security.ima [ 8.775684] evm: security.capability [ 8.775684] evm: HMAC attrs: 0x1 [ 8.776389] Magic number: 7:321:263 [ 8.776429] acpi device:6f: hash matches [ 8.776506] rtc_cmos 00:04: setting system clock to 2019-06-29T04:15:37 UTC (1561781737) [ 8.777989] Freeing unused decrypted memory: 2040K [ 8.778498] Freeing unused kernel image memory: 2576K [ 8.785682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 8.811435] Write protecting the kernel read-only data: 22528k [ 8.811966] Freeing unused kernel image memory: 2016K [ 8.812320] Freeing unused kernel image memory: 1852K [ 8.824256] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.824257] x86/mm: Checking user space page tables [ 8.835861] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.835863] Run /init as init process [ 8.936122] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 8.936148] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 8.956465] libphy: r8169: probed [ 8.956795] r8169 0000:02:00.0 eth0: RTL8168g/8111g, XX:XX:XX:XX:XX:XX, XID 509, IRQ 46 [ 8.956797] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 8.966159] ahci 0000:00:1f.2: version 3.0 [ 8.976575] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 8.976579] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 8.979658] scsi host0: ahci [ 8.981072] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 8.982447] scsi host1: ahci [ 8.982613] scsi host2: ahci [ 8.987322] scsi host3: ahci [ 8.987392] ata1: SATA max UDMA/133 abar m2048@0xb2222000 port 0xb2222100 irq 47 [ 8.987394] ata2: SATA max UDMA/133 abar m2048@0xb2222000 port 0xb2222180 irq 47 [ 8.987395] ata3: DUMMY [ 8.987396] ata4: DUMMY [ 8.994373] VFIO - User Level meta-driver version: 0.3 [ 9.025597] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 9.025599] fb0: switching to inteldrmfb from EFI VGA [ 9.025622] Console: switching to colour dummy device 80x25 [ 9.025719] [drm] Replacing VGA console driver [ 9.026817] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.026818] [drm] Driver supports precise vblank timestamp query. [ 9.027248] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.054617] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 [ 9.057734] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.062014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 9.066281] fbcon: inteldrmfb (fb0) is primary device [ 9.071324] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 9.075406] usb 2-5: new high-speed USB device number 2 using xhci_hcd [ 9.227922] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 9.227923] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 9.228194] hub 1-1:1.0: USB hub found [ 9.228255] hub 1-1:1.0: 8 ports detected [ 9.244398] usb 2-5: New USB device found, idVendor=0bda, idProduct=57b5, bcdDevice= 0.12 [ 9.244400] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 9.244401] usb 2-5: Product: USB Camera [ 9.244402] usb 2-5: Manufacturer: 04081-0005360015281084624 [ 9.244403] usb 2-5: SerialNumber: ... [ 9.302652] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.302667] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.302862] ata1.00: both IDENTIFYs aborted, assuming NODEV [ 9.304979] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100 [ 9.307586] ata2.00: configured for UDMA/100 [ 9.309397] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5 [ 9.339037] sr 1:0:0:0: [sr0] scsi3-mmc drive: 47x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.339039] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.339271] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.339376] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 9.371403] usb 2-8: new high-speed USB device number 3 using xhci_hcd [ 9.519891] usb 2-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 9.519893] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.519894] usb 2-8: Product: USB2.0-CRW [ 9.519895] usb 2-8: Manufacturer: Generic [ 9.519896] usb 2-8: SerialNumber: ... [ 9.523963] usbcore: registered new interface driver rtsx_usb [ 9.636949] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f00) [ 9.651013] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e. [ 9.655363] tsc: Refined TSC clocksource calibration: 2196.821 MHz [ 9.655371] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1faa77c7738, max_idle_ns: 440795287426 ns [ 9.655385] clocksource: Switched to clocksource tsc [ 9.665121] psmouse serio4: elantech: Elan sample query result 00, 23, 64 [ 9.733022] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12 [ 10.293786] Console: switching to colour frame buffer device 170x48 [ 10.312666] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 13.465449] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 13.469419] ISO 9660 Extensions: RRIP_1991A [ 59.956079] systemd[1]: Inserted module 'autofs4' [ 60.191072] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 60.207513] systemd[1]: Detected architecture x86-64. [ 60.210729] systemd[1]: Set hostname to ... [ 60.210963] systemd[1]: Initializing machine ID from random generator. [ 62.541226] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid \xe2\x86\x92 /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. [ 62.542560] systemd[1]: cdrom.mount: Unit is bound to inactive unit dev-sr0.device. Stopping, too. [ 62.544002] systemd[1]: Reached target User and Group Name Lookups. [ 62.544127] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 62.544237] systemd[1]: Listening on udev Control Socket. [ 62.544337] systemd[1]: Listening on Journal Socket (/dev/log). [ 62.547970] systemd[936]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 64.155386] systemd-journald[947]: Received request to flush runtime journal from PID 1 [ 66.745895] lp: driver loaded but no devices found [ 67.265599] ppdev: user-space parallel port driver [ 69.263726] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 69.263728] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 69.263729] RAPL PMU: hw unit of domain package 2^-14 Joules [ 69.263730] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 69.263731] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 91.386923] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input13 [ 91.401758] cryptd: max_cpu_qlen set to 1000 [ 91.958581] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 92.624667] asus_wmi: ASUS WMI generic driver loaded [ 94.758184] asus_wmi: Initialization: 0x1 [ 94.758240] asus_wmi: BIOS WMI version: 7.9 [ 94.758297] asus_wmi: SFUN value: 0xa0077 [ 94.760187] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14 [ 94.762717] asus_wmi: Number of fans: 1 [ 95.983129] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 95.985500] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 99.028046] AVX2 version of gcm_enc/dec engaged. [ 99.028047] AES CTR mode by8 optimization enabled [ 103.664087] media: Linux media interface: v0.10 [ 106.748185] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0 [ 106.748232] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 106.758726] videodev: Linux video capture interface: v2.00 [ 107.734143] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 107.734246] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 107.734343] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 107.734443] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 107.734539] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 110.284272] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 110.284274] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 110.284275] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 110.284276] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 110.284277] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 110.284278] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 110.333599] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 111.950576] intel_rapl: Found RAPL domain package [ 111.950578] intel_rapl: Found RAPL domain core [ 111.950579] intel_rapl: Found RAPL domain uncore [ 111.950580] intel_rapl: Found RAPL domain dram [ 111.950583] intel_rapl: RAPL package 0 domain package locked by BIOS [ 111.950590] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 112.097220] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b5) [ 112.106844] uvcvideo 2-5:1.0: Entity type for entity Extension 7 was not initialized! [ 112.106847] uvcvideo 2-5:1.0: Entity type for entity Processing 2 was not initialized! [ 112.106848] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized! [ 112.106849] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized! [ 112.106917] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input21 [ 112.107020] usbcore: registered new interface driver uvcvideo [ 112.107021] USB Video Class driver (1.1.1) [ 114.249266] ath: phy0: Disable PLL PowerSave [ 114.256652] ath: phy0: Enable LNA combining [ 114.257892] ath: phy0: ASPM enabled: 0x43 [ 114.257894] ath: EEPROM regdomain: 0x6c [ 114.257894] ath: EEPROM indicates we should expect a direct regpair map [ 114.257896] ath: Country alpha2 being used: 00 [ 114.257896] ath: Regpair used: 0x6c [ 115.187264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 115.187848] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa9b041680000, irq=19 [ 116.008685] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 132.546452] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 132.649554] r8169 0000:02:00.0 enp2s0: Link is Down [ 837.992172] rfkill: input handler disabled [ 891.321413] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 891.336320] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 891.344860] wlp3s0: authenticated [ 891.347363] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 891.351139] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 891.351283] wlp3s0: associated [ 891.351426] ath: EEPROM regdomain: 0x8348 [ 891.351428] ath: EEPROM indicates we should expect a country code [ 891.351429] ath: doing EEPROM country->regdmn map search [ 891.351431] ath: country maps to regdmn code: 0x3a [ 891.351432] ath: Country alpha2 being used: US [ 891.351433] ath: Regpair used: 0x3a [ 891.351435] ath: regdomain 0x8348 dynamically updated by country element [ 899.388896] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 966.985042] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 967.006296] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 967.014358] wlp3s0: authenticated [ 967.015312] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 967.019415] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4) [ 967.019559] wlp3s0: associated [ 967.019898] ath: EEPROM regdomain: 0x8348 [ 967.019900] ath: EEPROM indicates we should expect a country code [ 967.019901] ath: doing EEPROM country->regdmn map search [ 967.019902] ath: country maps to regdmn code: 0x3a [ 967.019903] ath: Country alpha2 being used: US [ 967.019904] ath: Regpair used: 0x3a [ 967.019906] ath: regdomain 0x8348 dynamically updated by country element [ 967.085341] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 2275.449644] proc_thermal 0000:00:04.0: Unsupported event [0x84] [ 2320.907234] asus_wmi: Unknown key cf pressed [ 2321.469674] proc_thermal 0000:00:04.0: Unsupported event [0x84] [13760.252982] usb 2-1: new high-speed USB device number 4 using xhci_hcd [13760.409543] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [13760.409549] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13760.409552] usb 2-1: Product: SAMSUNG_Android [13760.409555] usb 2-1: Manufacturer: SAMSUNG [13760.409558] usb 2-1: SerialNumber: ... [13774.896598] usb 2-1: USB disconnect, device number 4 [13775.288831] usb 2-1: new high-speed USB device number 5 using xhci_hcd [13775.441754] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [13775.441760] usb 2-1: New USB device strings: Mfr=7, Product=8, SerialNumber=... [13775.441763] usb 2-1: Product: SAMSUNG_Android [13775.441766] usb 2-1: Manufacturer: SAMSUNG [13775.441768] usb 2-1: SerialNumber: ... [13790.542604] usb 2-1: USB disconnect, device number 5 [13790.928814] usb 2-1: new high-speed USB device number 6 using xhci_hcd [13791.083307] usb 2-1: New USB device found, idVendor=04e8, idProduct=685b, bcdDevice= 4.00 [13791.083313] usb 2-1: New USB device strings: Mfr=7, Product=8, SerialNumber=... [13791.083316] usb 2-1: Product: SAMSUNG_Android [13791.083319] usb 2-1: Manufacturer: SAMSUNG [13791.083321] usb 2-1: SerialNumber: ... [13793.052589] usb-storage 2-1:1.0: USB Mass Storage device detected [13793.053318] scsi host4: usb-storage 2-1:1.0 [13793.053592] usbcore: registered new interface driver usb-storage [13793.098723] usbcore: registered new interface driver uas [13794.078031] scsi 4:0:0:0: CD-ROM SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [13794.079581] sr 4:0:0:0: [sr1] scsi3-mmc drive: 0x/0x cd/rw tray [13794.080228] sr 4:0:0:0: Attached scsi CD-ROM sr1 [13794.080578] sr 4:0:0:0: Attached scsi generic sg1 type 5 [13821.516273] usb 2-1: USB disconnect, device number 6 [13821.948580] usb 2-1: new high-speed USB device number 7 using xhci_hcd [13822.102969] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [13822.102975] usb 2-1: New USB device strings: Mfr=7, Product=8, SerialNumber=... [13822.102979] usb 2-1: Product: SAMSUNG_Android [13822.102981] usb 2-1: Manufacturer: SAMSUNG [13822.102984] usb 2-1: SerialNumber: ... [15590.000803] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [15590.015482] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15590.023742] wlp3s0: authenticated [15590.025905] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15590.029840] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [15590.030003] wlp3s0: associated [15590.030135] ath: EEPROM regdomain: 0x8348 [15590.030136] ath: EEPROM indicates we should expect a country code [15590.030139] ath: doing EEPROM country->regdmn map search [15590.030141] ath: country maps to regdmn code: 0x3a [15590.030142] ath: Country alpha2 being used: US [15590.030144] ath: Regpair used: 0x3a [15590.030146] ath: regdomain 0x8348 dynamically updated by country element [15590.059027] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [15868.195788] usb 2-1: USB disconnect, device number 7 [15875.325014] usb 2-1: new high-speed USB device number 8 using xhci_hcd [15875.474343] usb 2-1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 3.18 [15875.474349] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [15875.474352] usb 2-1: Product: LG-H910 [15875.474355] usb 2-1: Manufacturer: LGE [15875.474357] usb 2-1: SerialNumber: ... [16643.378696] proc_thermal 0000:00:04.0: Unsupported event [0x84] [16643.748992] asus_wmi: Unknown key cf pressed [16644.382696] proc_thermal 0000:00:04.0: Unsupported event [0x84] [16664.128769] asus_wmi: Unknown key cf pressed [16664.394645] proc_thermal 0000:00:04.0: Unsupported event [0x84] [16670.394613] proc_thermal 0000:00:04.0: Unsupported event [0x84] [16670.912894] asus_wmi: Unknown key cf pressed [16671.398610] proc_thermal 0000:00:04.0: Unsupported event [0x84] [17324.018399] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [17643.658253] usb 2-1: USB disconnect, device number 8 [18980.699237] proc_thermal 0000:00:04.0: Unsupported event [0x84] [18981.597081] asus_wmi: Unknown key cf pressed [18981.703515] proc_thermal 0000:00:04.0: Unsupported event [0x84] [19007.051146] proc_thermal 0000:00:04.0: Unsupported event [0x84] [19009.473350] asus_wmi: Unknown key cf pressed [19010.055067] proc_thermal 0000:00:04.0: Unsupported event [0x84] [19704.936174] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [19704.950941] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19704.961568] wlp3s0: authenticated [19704.964695] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19704.968696] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [19704.968846] wlp3s0: associated [19704.968981] ath: EEPROM regdomain: 0x8348 [19704.968983] ath: EEPROM indicates we should expect a country code [19704.968985] ath: doing EEPROM country->regdmn map search [19704.968987] ath: country maps to regdmn code: 0x3a [19704.968988] ath: Country alpha2 being used: US [19704.968989] ath: Regpair used: 0x3a [19704.968992] ath: regdomain 0x8348 dynamically updated by country element [19705.007818] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [21292.791776] proc_thermal 0000:00:04.0: Unsupported event [0x84] [21682.587757] PM: suspend entry (deep) [21682.587759] PM: Syncing filesystems ... done. [21682.588841] Freezing user space processes ... (elapsed 0.003 seconds) done. [21682.591966] OOM killer disabled. [21682.591967] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21682.593289] printk: Suspending console(s) (use no_console_suspend to debug) [21682.593515] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [21683.039610] ACPI: EC: interrupt blocked [21683.079092] ACPI: Preparing to enter system sleep state S3 [21683.089740] ACPI: EC: event blocked [21683.089742] ACPI: EC: EC stopped [21683.089743] PM: Saving platform NVS memory [21683.090073] Disabling non-boot CPUs ... [21683.090752] IRQ 48: no longer affine to CPU1 [21683.091791] smpboot: CPU 1 is now offline [21683.096226] IRQ 46: no longer affine to CPU2 [21683.097247] smpboot: CPU 2 is now offline [21683.101938] IRQ 19: no longer affine to CPU3 [21683.101942] IRQ 23: no longer affine to CPU3 [21683.101945] IRQ 43: no longer affine to CPU3 [21683.101947] IRQ 44: no longer affine to CPU3 [21683.101949] IRQ 45: no longer affine to CPU3 [21683.102961] smpboot: CPU 3 is now offline [21683.109620] ACPI: Low-level resume complete [21683.109763] ACPI: EC: EC started [21683.109765] PM: Restoring platform NVS memory [21683.120076] Enabling non-boot CPUs ... [21683.120228] x86: Booting SMP configuration: [21683.120234] smpboot: Booting Node 0 Processor 1 APIC 0x2 [21683.128833] cache: parent cpu1 should not be sleeping [21683.129705] CPU1 is up [21683.129811] smpboot: Booting Node 0 Processor 2 APIC 0x1 [21683.131994] cache: parent cpu2 should not be sleeping [21683.133284] CPU2 is up [21683.133375] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21683.135205] cache: parent cpu3 should not be sleeping [21683.136044] CPU3 is up [21683.151264] ACPI: Waking up from system sleep state S3 [21683.216333] ACPI: EC: interrupt unblocked [21683.258198] ACPI: EC: event unblocked [21683.258281] usb usb2: root hub lost power or was reset [21683.258291] usb usb3: root hub lost power or was reset [21683.262628] ath: phy0: ASPM enabled: 0x43 [21683.263273] ACPI: button: The lid device is not compliant to SW_LID. [21683.364162] r8169 0000:02:00.0 enp2s0: Link is Down [21683.507802] usb 1-1: reset high-speed USB device number 2 using ehci-pci [21683.575579] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21683.596214] ata2.00: configured for UDMA/100 [21683.619923] usb 2-5: reset high-speed USB device number 2 using xhci_hcd [21683.847891] proc_thermal 0000:00:04.0: Unsupported event [0x84] [21683.895955] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [21684.048080] OOM killer enabled. [21684.048083] Restarting tasks ... done. [21684.220164] PM: suspend exit [21684.350951] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [21684.477942] r8169 0000:02:00.0 enp2s0: Link is Down [21685.099733] proc_thermal 0000:00:04.0: Unsupported event [0x84] [21685.607104] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [21685.621827] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [21685.630739] wlp3s0: authenticated [21685.631645] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [21685.638743] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=7) [21685.638901] wlp3s0: associated [21685.639053] ath: EEPROM regdomain: 0x8348 [21685.639054] ath: EEPROM indicates we should expect a country code [21685.639056] ath: doing EEPROM country->regdmn map search [21685.639058] ath: country maps to regdmn code: 0x3a [21685.639060] ath: Country alpha2 being used: US [21685.639061] ath: Regpair used: 0x3a [21685.639064] ath: regdomain 0x8348 dynamically updated by country element [21685.735904] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [21688.627738] ata1: link is slow to respond, please be patient (ready=0) [21693.287711] ata1: COMRESET failed (errno=-16) [21694.186549] VFS: busy inodes on changed media or resized disk sr0 [21698.627704] ata1: link is slow to respond, please be patient (ready=0) [21703.323620] ata1: COMRESET failed (errno=-16) [21708.643663] ata1: link is slow to respond, please be patient (ready=0) [21738.379540] ata1: COMRESET failed (errno=-16) [21738.379552] ata1: limiting SATA link speed to 3.0 Gbps [21743.439491] ata1: COMRESET failed (errno=-16) [21743.439499] ata1: reset failed, giving up [23255.022035] PM: suspend entry (deep) [23255.022037] PM: Syncing filesystems ... done. [23255.022380] Freezing user space processes ... (elapsed 0.003 seconds) done. [23255.025413] OOM killer disabled. [23255.025414] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [23255.026818] printk: Suspending console(s) (use no_console_suspend to debug) [23255.027057] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [23255.483609] ACPI: EC: interrupt blocked [23255.523394] ACPI: Preparing to enter system sleep state S3 [23255.534283] ACPI: EC: event blocked [23255.534284] ACPI: EC: EC stopped [23255.534285] PM: Saving platform NVS memory [23255.534625] Disabling non-boot CPUs ... [23255.535277] IRQ 48: no longer affine to CPU1 [23255.536316] smpboot: CPU 1 is now offline [23255.538910] IRQ 46: no longer affine to CPU2 [23255.540386] smpboot: CPU 2 is now offline [23255.542508] IRQ 19: no longer affine to CPU3 [23255.542513] IRQ 23: no longer affine to CPU3 [23255.542517] IRQ 43: no longer affine to CPU3 [23255.542520] IRQ 44: no longer affine to CPU3 [23255.543541] smpboot: CPU 3 is now offline [23255.549648] ACPI: Low-level resume complete [23255.549790] ACPI: EC: EC started [23255.549793] PM: Restoring platform NVS memory [23255.559684] Enabling non-boot CPUs ... [23255.559918] x86: Booting SMP configuration: [23255.559924] smpboot: Booting Node 0 Processor 1 APIC 0x2 [23255.568525] cache: parent cpu1 should not be sleeping [23255.569399] CPU1 is up [23255.569505] smpboot: Booting Node 0 Processor 2 APIC 0x1 [23255.571588] cache: parent cpu2 should not be sleeping [23255.572966] CPU2 is up [23255.573066] smpboot: Booting Node 0 Processor 3 APIC 0x3 [23255.574905] cache: parent cpu3 should not be sleeping [23255.575631] CPU3 is up [23255.697845] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff [23255.708615] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [23255.709199] ACPI: Waking up from system sleep state S3 [23255.730589] ACPI: EC: interrupt unblocked [23255.773919] ACPI: EC: event unblocked [23255.773994] usb usb2: root hub lost power or was reset [23255.774004] usb usb3: root hub lost power or was reset [23255.777929] ath: phy0: ASPM enabled: 0x43 [23255.880703] r8169 0000:02:00.0 enp2s0: Link is Down [23256.032371] usb 1-1: reset high-speed USB device number 2 using ehci-pci [23256.092504] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [23256.113196] ata2.00: configured for UDMA/100 [23256.136529] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [23256.292352] proc_thermal 0000:00:04.0: Unsupported event [0x84] [23256.412453] usb 2-5: reset high-speed USB device number 2 using xhci_hcd [23256.586435] OOM killer enabled. [23256.586437] Restarting tasks ... done. [23256.744490] PM: suspend exit [23256.906945] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [23257.034300] r8169 0000:02:00.0 enp2s0: Link is Down [23257.524252] proc_thermal 0000:00:04.0: Unsupported event [0x84] [23258.161046] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [23258.175794] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23258.190631] wlp3s0: authenticated [23258.192134] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23258.197425] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=5) [23258.197574] wlp3s0: associated [23258.197667] ath: EEPROM regdomain: 0x8348 [23258.197668] ath: EEPROM indicates we should expect a country code [23258.197669] ath: doing EEPROM country->regdmn map search [23258.197670] ath: country maps to regdmn code: 0x3a [23258.197671] ath: Country alpha2 being used: US [23258.197671] ath: Regpair used: 0x3a [23258.197673] ath: regdomain 0x8348 dynamically updated by country element [23258.225483] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [23261.128113] ata1: link is slow to respond, please be patient (ready=0) [23265.788207] ata1: COMRESET failed (errno=-16) [23266.694599] VFS: busy inodes on changed media or resized disk sr0 [23271.112172] ata1: link is slow to respond, please be patient (ready=0) [23275.824080] ata1: COMRESET failed (errno=-16) [23281.195714] ata1: link is slow to respond, please be patient (ready=0) [23310.879927] ata1: COMRESET failed (errno=-16) [23310.879934] ata1: limiting SATA link speed to 1.5 Gbps [23315.931929] ata1: COMRESET failed (errno=-16) [23315.931938] ata1: reset failed, giving up [23549.616388] perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [25109.049504] PM: suspend entry (deep) [25109.049516] PM: Syncing filesystems ... done. [25109.049911] Freezing user space processes ... (elapsed 0.002 seconds) done. [25109.052590] OOM killer disabled. [25109.052591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25109.053970] printk: Suspending console(s) (use no_console_suspend to debug) [25109.054260] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [25109.503020] ACPI: EC: interrupt blocked [25109.542968] ACPI: Preparing to enter system sleep state S3 [25109.553973] ACPI: EC: event blocked [25109.553975] ACPI: EC: EC stopped [25109.553976] PM: Saving platform NVS memory [25109.554316] Disabling non-boot CPUs ... [25109.555083] IRQ 48: no longer affine to CPU1 [25109.556103] smpboot: CPU 1 is now offline [25109.558100] IRQ 46: no longer affine to CPU2 [25109.559427] smpboot: CPU 2 is now offline [25109.560992] IRQ 19: no longer affine to CPU3 [25109.560996] IRQ 23: no longer affine to CPU3 [25109.560998] IRQ 43: no longer affine to CPU3 [25109.561000] IRQ 44: no longer affine to CPU3 [25109.562018] smpboot: CPU 3 is now offline [25109.565502] ACPI: Low-level resume complete [25109.565577] ACPI: EC: EC started [25109.565578] PM: Restoring platform NVS memory [25109.575451] Enabling non-boot CPUs ... [25109.575538] x86: Booting SMP configuration: [25109.575540] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25109.578173] cache: parent cpu1 should not be sleeping [25109.578447] CPU1 is up [25109.578481] smpboot: Booting Node 0 Processor 2 APIC 0x1 [25109.579175] cache: parent cpu2 should not be sleeping [25109.579559] CPU2 is up [25109.579588] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25109.580223] cache: parent cpu3 should not be sleeping [25109.580625] CPU3 is up [25109.696047] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff [25109.706693] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [25109.706910] ACPI: Waking up from system sleep state S3 [25109.715188] ACPI: EC: interrupt unblocked [25109.754624] ACPI: EC: event unblocked [25109.754737] ath: phy0: ASPM enabled: 0x43 [25109.755398] usb usb2: root hub lost power or was reset [25109.755401] usb usb3: root hub lost power or was reset [25109.859551] r8169 0000:02:00.0 enp2s0: Link is Down [25110.001178] usb 1-1: reset high-speed USB device number 2 using ehci-pci [25110.072954] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [25110.092919] ata2.00: configured for UDMA/100 [25110.113417] usb 2-5: reset high-speed USB device number 2 using xhci_hcd [25110.329225] proc_thermal 0000:00:04.0: Unsupported event [0x84] [25110.389304] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [25110.541486] OOM killer enabled. [25110.541488] Restarting tasks ... done. [25110.748904] PM: suspend exit [25111.545217] proc_thermal 0000:00:04.0: Unsupported event [0x84] [25115.073176] ata1: link is slow to respond, please be patient (ready=0) [25119.773122] ata1: COMRESET failed (errno=-16) [25120.149598] sr 1:0:0:0: [sr0] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [25120.149603] sr 1:0:0:0: [sr0] tag#29 Sense Key : Unit Attention [current] [25120.149607] sr 1:0:0:0: [sr0] tag#29 Add. Sense: Not ready to ready change, medium may have changed [25120.149611] sr 1:0:0:0: [sr0] tag#29 CDB: Read(10) 28 00 00 00 8e 31 00 00 02 00 [25120.149614] print_req_error: I/O error, dev sr0, sector 145604 flags 80700 [25120.149694] print_req_error: I/O error, dev sr0, sector 145604 flags 0 [25120.149739] print_req_error: I/O error, dev loop0, sector 138698 flags 0 [25120.149767] SQUASHFS error: squashfs_read_data failed to read block 0x43b960d [25120.149774] print_req_error: I/O error, dev sr0, sector 145604 flags 0 [25120.149776] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.149779] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.149868] print_req_error: I/O error, dev loop0, sector 138700 flags 0 [25120.149887] print_req_error: I/O error, dev sr0, sector 145604 flags 0 [25120.149932] print_req_error: I/O error, dev loop0, sector 138702 flags 0 [25120.149948] print_req_error: I/O error, dev sr0, sector 145612 flags 0 [25120.150016] print_req_error: I/O error, dev loop0, sector 138704 flags 0 [25120.150034] print_req_error: I/O error, dev sr0, sector 145612 flags 0 [25120.156942] SQUASHFS error: squashfs_read_data failed to read block 0x43b960d [25120.156948] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.156954] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.156962] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.156964] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.156967] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.156968] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.156972] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.156974] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.160841] SQUASHFS error: squashfs_read_data failed to read block 0x43b960d [25120.160846] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.160854] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.160860] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.160862] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.160872] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.160875] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.160878] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.160880] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.161094] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.161098] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.168046] SQUASHFS error: squashfs_read_data failed to read block 0x33a30ee3 [25120.168052] SQUASHFS error: Unable to read fragment cache entry [33a30ee3] [25120.168054] SQUASHFS error: Unable to read page, block 33a30ee3, size 5c8d [25120.168062] SQUASHFS error: Unable to read fragment cache entry [33a30ee3] [25120.168063] SQUASHFS error: Unable to read page, block 33a30ee3, size 5c8d [25120.168065] SQUASHFS error: Unable to read fragment cache entry [33a30ee3] [25120.168066] SQUASHFS error: Unable to read page, block 33a30ee3, size 5c8d [25120.168068] SQUASHFS error: Unable to read fragment cache entry [33a30ee3] [25120.168070] SQUASHFS error: Unable to read page, block 33a30ee3, size 5c8d [25120.168074] SQUASHFS error: Unable to read fragment cache entry [33a30ee3] [25120.168075] SQUASHFS error: Unable to read page, block 33a30ee3, size 5c8d [25120.178989] SQUASHFS error: squashfs_read_data failed to read block 0x43b960d [25120.178994] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.178996] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.183076] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.183081] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.212783] SQUASHFS error: squashfs_read_data failed to read block 0x1f08e1b [25120.213489] SQUASHFS error: squashfs_read_data failed to read block 0x1f08e1b [25120.340646] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [25120.467340] r8169 0000:02:00.0 enp2s0: Link is Down [25120.643927] SQUASHFS error: squashfs_read_data failed to read block 0x43b960d [25120.643931] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.643932] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.643936] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.643938] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.643943] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.643944] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.643947] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.643948] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.643951] SQUASHFS error: Unable to read fragment cache entry [43b960d] [25120.643953] SQUASHFS error: Unable to read page, block 43b960d, size 9b91 [25120.645755] SQUASHFS error: squashfs_read_data failed to read block 0x43d67af [25120.755318] VFS: busy inodes on changed media or resized disk sr0 [25125.105138] ata1: link is slow to respond, please be patient (ready=0) [25129.825104] ata1: COMRESET failed (errno=-16) [25135.201137] ata1: link is slow to respond, please be patient (ready=0) [25164.881072] ata1: COMRESET failed (errno=-16) [25169.920996] ata1: COMRESET failed (errno=-16) [25169.921002] ata1: reset failed, giving up [25657.199394] perf: interrupt took too long (3150 > 3146), lowering kernel.perf_event_max_sample_rate to 63500 [25783.584218] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [25783.598941] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [25783.601569] wlp3s0: authenticated [25783.603084] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [25783.614300] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [25783.614442] wlp3s0: associated [25783.614539] ath: EEPROM regdomain: 0x8348 [25783.614540] ath: EEPROM indicates we should expect a country code [25783.614541] ath: doing EEPROM country->regdmn map search [25783.614543] ath: country maps to regdmn code: 0x3a [25783.614544] ath: Country alpha2 being used: US [25783.614544] ath: Regpair used: 0x3a [25783.614546] ath: regdomain 0x8348 dynamically updated by country element [25783.614882] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [25783.720122] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28617.004688] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28617.025002] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28617.039716] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28617.045195] wlp3s0: authenticated [28617.046749] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28617.058881] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28617.059085] wlp3s0: associated [28617.059333] ath: EEPROM regdomain: 0x8348 [28617.059334] ath: EEPROM indicates we should expect a country code [28617.059335] ath: doing EEPROM country->regdmn map search [28617.059336] ath: country maps to regdmn code: 0x3a [28617.059337] ath: Country alpha2 being used: US [28617.059338] ath: Regpair used: 0x3a [28617.059339] ath: regdomain 0x8348 dynamically updated by country element [28620.452055] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28620.466094] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28620.480774] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28620.484085] wlp3s0: authenticated [28620.486966] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28620.497630] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28620.497760] wlp3s0: associated [28620.497902] ath: EEPROM regdomain: 0x8348 [28620.497903] ath: EEPROM indicates we should expect a country code [28620.497904] ath: doing EEPROM country->regdmn map search [28620.497905] ath: country maps to regdmn code: 0x3a [28620.497906] ath: Country alpha2 being used: US [28620.497907] ath: Regpair used: 0x3a [28620.497908] ath: regdomain 0x8348 dynamically updated by country element [28620.612957] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28898.615715] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28898.629377] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28898.644149] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28898.646848] wlp3s0: authenticated [28898.649654] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28898.665590] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28898.665739] wlp3s0: associated [28898.665884] ath: EEPROM regdomain: 0x8348 [28898.665885] ath: EEPROM indicates we should expect a country code [28898.665886] ath: doing EEPROM country->regdmn map search [28898.665887] ath: country maps to regdmn code: 0x3a [28898.665888] ath: Country alpha2 being used: US [28898.665889] ath: Regpair used: 0x3a [28898.665890] ath: regdomain 0x8348 dynamically updated by country element [28898.847935] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28918.784439] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28918.797951] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28918.812635] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28918.817935] wlp3s0: authenticated [28918.818487] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28918.828362] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28918.828507] wlp3s0: associated [28918.828855] ath: EEPROM regdomain: 0x8348 [28918.828856] ath: EEPROM indicates we should expect a country code [28918.828857] ath: doing EEPROM country->regdmn map search [28918.828858] ath: country maps to regdmn code: 0x3a [28918.828859] ath: Country alpha2 being used: US [28918.828860] ath: Regpair used: 0x3a [28918.828861] ath: regdomain 0x8348 dynamically updated by country element [28919.006897] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28924.224399] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28924.237890] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28924.253015] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28924.255842] wlp3s0: authenticated [28924.258598] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28924.277349] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28924.277491] wlp3s0: associated [28924.277590] ath: EEPROM regdomain: 0x8348 [28924.277591] ath: EEPROM indicates we should expect a country code [28924.277592] ath: doing EEPROM country->regdmn map search [28924.277593] ath: country maps to regdmn code: 0x3a [28924.277594] ath: Country alpha2 being used: US [28924.277595] ath: Regpair used: 0x3a [28924.277597] ath: regdomain 0x8348 dynamically updated by country element [28924.447839] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28927.383619] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28927.399285] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28927.414001] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28927.418637] wlp3s0: authenticated [28927.422748] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28927.435540] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28927.435671] wlp3s0: associated [28927.436024] ath: EEPROM regdomain: 0x8348 [28927.436025] ath: EEPROM indicates we should expect a country code [28927.436026] ath: doing EEPROM country->regdmn map search [28927.436028] ath: country maps to regdmn code: 0x3a [28927.436029] ath: Country alpha2 being used: US [28927.436030] ath: Regpair used: 0x3a [28927.436032] ath: regdomain 0x8348 dynamically updated by country element [28927.608487] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28931.408797] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28931.422180] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28931.436880] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28931.439770] wlp3s0: authenticated [28931.446948] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28931.460780] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28931.460928] wlp3s0: associated [28931.461300] ath: EEPROM regdomain: 0x8348 [28931.461301] ath: EEPROM indicates we should expect a country code [28931.461302] ath: doing EEPROM country->regdmn map search [28931.461303] ath: country maps to regdmn code: 0x3a [28931.461304] ath: Country alpha2 being used: US [28931.461305] ath: Regpair used: 0x3a [28931.461306] ath: regdomain 0x8348 dynamically updated by country element [28931.615762] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28945.392699] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28945.409653] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28945.424314] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28945.429023] wlp3s0: authenticated [28945.433327] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28945.446765] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28945.446899] wlp3s0: associated [28945.447173] ath: EEPROM regdomain: 0x8348 [28945.447174] ath: EEPROM indicates we should expect a country code [28945.447175] ath: doing EEPROM country->regdmn map search [28945.447177] ath: country maps to regdmn code: 0x3a [28945.447178] ath: Country alpha2 being used: US [28945.447179] ath: Regpair used: 0x3a [28945.447180] ath: regdomain 0x8348 dynamically updated by country element [28945.630814] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28958.413801] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28958.427555] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [28958.442283] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28958.447900] wlp3s0: authenticated [28958.452296] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28958.467512] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [28958.467662] wlp3s0: associated [28958.468019] ath: EEPROM regdomain: 0x8348 [28958.468020] ath: EEPROM indicates we should expect a country code [28958.468022] ath: doing EEPROM country->regdmn map search [28958.468023] ath: country maps to regdmn code: 0x3a [28958.468024] ath: Country alpha2 being used: US [28958.468025] ath: Regpair used: 0x3a [28958.468026] ath: regdomain 0x8348 dynamically updated by country element [28958.649283] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29019.184686] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29019.198669] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29019.213768] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29019.216179] wlp3s0: authenticated [29019.219296] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29019.229326] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29019.229457] wlp3s0: associated [29019.229585] ath: EEPROM regdomain: 0x8348 [29019.229586] ath: EEPROM indicates we should expect a country code [29019.229587] ath: doing EEPROM country->regdmn map search [29019.229588] ath: country maps to regdmn code: 0x3a [29019.229589] ath: Country alpha2 being used: US [29019.229590] ath: Regpair used: 0x3a [29019.229591] ath: regdomain 0x8348 dynamically updated by country element [29019.360214] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29022.628334] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29022.644581] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29022.659308] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29022.662130] wlp3s0: authenticated [29022.663108] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29022.677468] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29022.677613] wlp3s0: associated [29022.677728] ath: EEPROM regdomain: 0x8348 [29022.677729] ath: EEPROM indicates we should expect a country code [29022.677730] ath: doing EEPROM country->regdmn map search [29022.677731] ath: country maps to regdmn code: 0x3a [29022.677733] ath: Country alpha2 being used: US [29022.677733] ath: Regpair used: 0x3a [29022.677735] ath: regdomain 0x8348 dynamically updated by country element [29022.751310] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29044.401785] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29044.415295] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29044.430002] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29044.432407] wlp3s0: authenticated [29044.436191] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29044.449438] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29044.449569] wlp3s0: associated [29044.449722] ath: EEPROM regdomain: 0x8348 [29044.449723] ath: EEPROM indicates we should expect a country code [29044.449724] ath: doing EEPROM country->regdmn map search [29044.449725] ath: country maps to regdmn code: 0x3a [29044.449726] ath: Country alpha2 being used: US [29044.449727] ath: Regpair used: 0x3a [29044.449728] ath: regdomain 0x8348 dynamically updated by country element [29044.549472] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29052.802304] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29052.817750] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29052.832494] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29052.835407] wlp3s0: authenticated [29052.836537] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29052.849969] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29052.850116] wlp3s0: associated [29052.850207] ath: EEPROM regdomain: 0x8348 [29052.850208] ath: EEPROM indicates we should expect a country code [29052.850209] ath: doing EEPROM country->regdmn map search [29052.850210] ath: country maps to regdmn code: 0x3a [29052.850211] ath: Country alpha2 being used: US [29052.850212] ath: Regpair used: 0x3a [29052.850214] ath: regdomain 0x8348 dynamically updated by country element [29052.856744] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29078.775625] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29078.789100] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29078.803868] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29078.806541] wlp3s0: authenticated [29078.809877] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29078.823838] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29078.823974] wlp3s0: associated [29078.824107] ath: EEPROM regdomain: 0x8348 [29078.824108] ath: EEPROM indicates we should expect a country code [29078.824109] ath: doing EEPROM country->regdmn map search [29078.824110] ath: country maps to regdmn code: 0x3a [29078.824111] ath: Country alpha2 being used: US [29078.824112] ath: Regpair used: 0x3a [29078.824113] ath: regdomain 0x8348 dynamically updated by country element [29078.955917] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29081.415961] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29081.429244] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29081.443915] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29081.450062] wlp3s0: authenticated [29081.454012] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29081.475831] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29081.475977] wlp3s0: associated [29081.476325] ath: EEPROM regdomain: 0x8348 [29081.476326] ath: EEPROM indicates we should expect a country code [29081.476327] ath: doing EEPROM country->regdmn map search [29081.476328] ath: country maps to regdmn code: 0x3a [29081.476329] ath: Country alpha2 being used: US [29081.476330] ath: Regpair used: 0x3a [29081.476332] ath: regdomain 0x8348 dynamically updated by country element [29081.528731] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29129.190195] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29129.207231] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29129.222172] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29129.224793] wlp3s0: authenticated [29129.228349] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29129.238506] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29129.238639] wlp3s0: associated [29129.238772] ath: EEPROM regdomain: 0x8348 [29129.238774] ath: EEPROM indicates we should expect a country code [29129.238775] ath: doing EEPROM country->regdmn map search [29129.238776] ath: country maps to regdmn code: 0x3a [29129.238777] ath: Country alpha2 being used: US [29129.238777] ath: Regpair used: 0x3a [29129.238779] ath: regdomain 0x8348 dynamically updated by country element [29129.336718] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29152.185603] usb 2-3: new high-speed USB device number 9 using xhci_hcd [29152.337683] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29152.337686] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29152.337689] usb 2-3: Product: SAMSUNG_Android [29152.337691] usb 2-3: Manufacturer: SAMSUNG [29152.337692] usb 2-3: SerialNumber: ... [29157.530184] usb 2-3: reset high-speed USB device number 9 using xhci_hcd [29159.884392] usb 2-3: USB disconnect, device number 9 [29160.190025] usb 2-3: new high-speed USB device number 10 using xhci_hcd [29160.341925] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29160.341932] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29160.341936] usb 2-3: Product: SAMSUNG_Android [29160.341941] usb 2-3: Manufacturer: SAMSUNG [29160.341944] usb 2-3: SerialNumber: ... [29162.566343] usb 2-3: reset high-speed USB device number 10 using xhci_hcd [29164.282323] usb 2-3: USB disconnect, device number 10 [29164.590208] usb 2-3: new high-speed USB device number 11 using xhci_hcd [29164.741617] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29164.741619] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29164.741621] usb 2-3: Product: SAMSUNG_Android [29164.741622] usb 2-3: Manufacturer: SAMSUNG [29164.741623] usb 2-3: SerialNumber: ... [29167.490717] usb 2-3: reset high-speed USB device number 11 using xhci_hcd [29169.818311] usb 2-3: USB disconnect, device number 11 [29170.126548] usb 2-3: new high-speed USB device number 12 using xhci_hcd [29170.279055] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29170.279060] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29170.279064] usb 2-3: Product: SAMSUNG_Android [29170.279067] usb 2-3: Manufacturer: SAMSUNG [29170.279070] usb 2-3: SerialNumber: ... [29172.450445] usb 2-3: USB disconnect, device number 12 [29172.762685] usb 2-3: new high-speed USB device number 13 using xhci_hcd [29172.919034] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29172.919039] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29172.919043] usb 2-3: Product: SAMSUNG_Android [29172.919046] usb 2-3: Manufacturer: SAMSUNG [29172.919048] usb 2-3: SerialNumber: ... [29173.247057] usb 2-3: reset high-speed USB device number 13 using xhci_hcd [29174.130234] usb 2-3: USB disconnect, device number 13 [29174.582821] usb 2-3: new high-speed USB device number 14 using xhci_hcd [29174.636355] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29174.650374] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29174.665301] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29174.668494] wlp3s0: authenticated [29174.670834] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29174.686341] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29174.686483] wlp3s0: associated [29174.686595] ath: EEPROM regdomain: 0x8348 [29174.686596] ath: EEPROM indicates we should expect a country code [29174.686597] ath: doing EEPROM country->regdmn map search [29174.686598] ath: country maps to regdmn code: 0x3a [29174.686599] ath: Country alpha2 being used: US [29174.686600] ath: Regpair used: 0x3a [29174.686602] ath: regdomain 0x8348 dynamically updated by country element [29174.726798] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29174.742602] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29174.742605] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29174.742607] usb 2-3: Product: SAMSUNG_Android [29174.742608] usb 2-3: Manufacturer: SAMSUNG [29174.742609] usb 2-3: SerialNumber: ... [29177.839339] usb 2-3: reset high-speed USB device number 14 using xhci_hcd [29184.522397] usb 2-3: USB disconnect, device number 14 [29184.831335] usb 2-3: new high-speed USB device number 15 using xhci_hcd [29184.983506] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29184.983512] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29184.983515] usb 2-3: Product: SAMSUNG_Android [29184.983518] usb 2-3: Manufacturer: SAMSUNG [29184.983521] usb 2-3: SerialNumber: ... [29188.876517] usb 2-3: USB disconnect, device number 15 [29189.183463] usb 2-3: new high-speed USB device number 16 using xhci_hcd [29189.334799] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29189.334801] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29189.334802] usb 2-3: Product: SAMSUNG_Android [29189.334804] usb 2-3: Manufacturer: SAMSUNG [29189.334805] usb 2-3: SerialNumber: ... [29190.232541] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29190.246870] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [29190.261594] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29190.266181] wlp3s0: authenticated [29190.267528] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29190.279625] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1421 status=0 aid=2) [29190.279762] wlp3s0: associated [29190.279862] ath: EEPROM regdomain: 0x8348 [29190.279862] ath: EEPROM indicates we should expect a country code [29190.279864] ath: doing EEPROM country->regdmn map search [29190.279865] ath: country maps to regdmn code: 0x3a [29190.279866] ath: Country alpha2 being used: US [29190.279867] ath: Regpair used: 0x3a [29190.279868] ath: regdomain 0x8348 dynamically updated by country element [29190.338776] usb 2-3: USB disconnect, device number 16 [29190.367125] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29190.663551] usb 2-3: new high-speed USB device number 17 using xhci_hcd [29190.817589] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29190.817592] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29190.817593] usb 2-3: Product: SAMSUNG_Android [29190.817594] usb 2-3: Manufacturer: SAMSUNG [29190.817595] usb 2-3: SerialNumber: ... [29192.407024] usb 2-3: USB disconnect, device number 17 [29192.723692] usb 2-3: new high-speed USB device number 18 using xhci_hcd [29192.876987] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29192.876989] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29192.876991] usb 2-3: Product: SAMSUNG_Android [29192.876992] usb 2-3: Manufacturer: SAMSUNG [29192.876993] usb 2-3: SerialNumber: ... [29197.747393] usb 2-3: USB disconnect, device number 18 [29198.059949] usb 2-3: new high-speed USB device number 19 using xhci_hcd [29198.215626] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29198.215630] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29198.215632] usb 2-3: Product: SAMSUNG_Android [29198.215634] usb 2-3: Manufacturer: SAMSUNG [29198.215636] usb 2-3: SerialNumber: ... [29211.253279] usb 2-3: USB disconnect, device number 19 [29211.564679] usb 2-3: new high-speed USB device number 20 using xhci_hcd [29211.718085] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29211.718088] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29211.718091] usb 2-3: Product: SAMSUNG_Android [29211.718092] usb 2-3: Manufacturer: SAMSUNG [29211.718094] usb 2-3: SerialNumber: ... [29232.056143] usb 2-3: USB disconnect, device number 20 [29232.365800] usb 2-3: new high-speed USB device number 21 using xhci_hcd [29232.518399] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29232.518405] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29232.518408] usb 2-3: Product: SAMSUNG_Android [29232.518411] usb 2-3: Manufacturer: SAMSUNG [29232.518413] usb 2-3: SerialNumber: ... [29241.149675] usb 2-3: USB disconnect, device number 21 [29241.458271] usb 2-3: new high-speed USB device number 22 using xhci_hcd [29241.611935] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29241.611938] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29241.611939] usb 2-3: Product: SAMSUNG_Android [29241.611940] usb 2-3: Manufacturer: SAMSUNG [29241.611941] usb 2-3: SerialNumber: ... [29242.740666] usb 2-3: USB disconnect, device number 22 [29243.050379] usb 2-3: new high-speed USB device number 23 using xhci_hcd [29248.662739] usb 2-3: device descriptor read/64, error -110 [29248.926109] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29248.926112] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29248.926114] usb 2-3: Product: SAMSUNG_Android [29248.926115] usb 2-3: Manufacturer: SAMSUNG [29248.926116] usb 2-3: SerialNumber: ... [29253.020520] usb 2-3: USB disconnect, device number 23 [29253.326965] usb 2-3: new high-speed USB device number 24 using xhci_hcd [29253.478549] usb 2-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00 [29253.478552] usb 2-3: New USB device strings: Mfr=7, Product=8, SerialNumber=... [29253.478553] usb 2-3: Product: SAMSUNG_Android [29253.478554] usb 2-3: Manufacturer: SAMSUNG [29253.478555] usb 2-3: SerialNumber: ... [29253.934959] usb 2-1: new high-speed USB device number 25 using xhci_hcd [29254.083903] usb 2-1: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00 [29254.083906] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29254.083908] usb 2-1: Product: Disk [29254.083910] usb 2-1: Manufacturer: USB [29254.083911] usb 2-1: SerialNumber: ... [29254.085110] usb-storage 2-1:1.0: USB Mass Storage device detected [29254.086806] scsi host4: usb-storage 2-1:1.0 [29255.095488] scsi 4:0:0:0: Direct-Access USB Disk 2.60 PQ: 0 ANSI: 2 [29255.095895] sd 4:0:0:0: Attached scsi generic sg1 type 0 [29255.096423] sd 4:0:0:0: [sda] 257472 512-byte logical blocks: (132 MB/126 MiB) [29255.096568] sd 4:0:0:0: [sda] Write Protect is off [29255.096571] sd 4:0:0:0: [sda] Mode Sense: 0b 00 00 08 [29255.096709] sd 4:0:0:0: [sda] No Caching mode page found [29255.096714] sd 4:0:0:0: [sda] Assuming drive cache: write through [29255.100697] sda: sda1 [29255.101709] sd 4:0:0:0: [sda] Attached SCSI removable disk [29259.714935] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [29281.948271] usb 2-3: USB disconnect, device number 24