[ 0.000000] Linux version 5.3.6-200.fc30.x86_64 (XXX@XXX) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Mon Oct 14 13:11:01 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.3.6-200.fc30.x86_64 root=/dev/mapper/XXXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dbdf9bff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbdf9c00-0x00000000dbe4bbff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbe4bc00-0x00000000dbe4dbff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dbe4dc00-0x00000000dbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c23ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. Precision WorkStation T7500 /06FW8P, BIOS A18 10/15/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3324.823 MHz processor [ 0.002707] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002709] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002712] last_pfn = 0xc24000 max_arch_pfn = 0x400000000 [ 0.002716] MTRR default type: write-back [ 0.002716] MTRR fixed ranges enabled: [ 0.002717] 00000-9FFFF write-back [ 0.002718] A0000-BFFFF uncachable [ 0.002718] C0000-DBFFF write-protect [ 0.002719] DC000-EFFFF uncachable [ 0.002720] F0000-FFFFF write-protect [ 0.002720] MTRR variable ranges enabled: [ 0.002721] 0 base 00DBF00000 mask FFFFF00000 uncachable [ 0.002722] 1 base 00DC000000 mask FFFC000000 uncachable [ 0.002723] 2 base 00E0000000 mask FFE0000000 uncachable [ 0.002723] 3 disabled [ 0.002724] 4 disabled [ 0.002724] 5 disabled [ 0.002724] 6 disabled [ 0.002725] 7 disabled [ 0.002725] 8 disabled [ 0.002726] 9 disabled [ 0.004476] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004588] last_pfn = 0xdbdf9 max_arch_pfn = 0x400000000 [ 0.023181] Using GB pages for direct mapping [ 0.023184] BRK [0x4f3001000, 0x4f3001fff] PGTABLE [ 0.023187] BRK [0x4f3002000, 0x4f3002fff] PGTABLE [ 0.023188] BRK [0x4f3003000, 0x4f3003fff] PGTABLE [ 0.023215] BRK [0x4f3004000, 0x4f3004fff] PGTABLE [ 0.023216] BRK [0x4f3005000, 0x4f3005fff] PGTABLE [ 0.023217] BRK [0x4f3006000, 0x4f3006fff] PGTABLE [ 0.023362] BRK [0x4f3007000, 0x4f3007fff] PGTABLE [ 0.023385] BRK [0x4f3008000, 0x4f3008fff] PGTABLE [ 0.023445] RAMDISK: [mem 0x3498c000-0x364bdfff] [ 0.023452] ACPI: Early table checksum verification disabled [ 0.023457] ACPI: RSDP 0x00000000000FEC30 000024 (v02 DELL ) [ 0.023460] ACPI: XSDT 0x00000000000FCAF5 00007C (v01 DELL B10K 00000015 ASL 00000061) [ 0.023465] ACPI: FACP 0x00000000000FCBED 0000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.023468] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190703/tbfadt-564) [ 0.023565] ACPI: DSDT 0x00000000FFEA219D 005908 (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.023573] ACPI: FACS 0x00000000DBDF9C00 000040 [ 0.023575] ACPI: FACS 0x00000000DBDF9C00 000040 [ 0.023670] ACPI: SSDT 0x00000000FFEA7BB6 00009C (v01 DELL st_ex 00001000 INTL 20050624) [ 0.023673] ACPI: APIC 0x00000000000FCCE1 00026A (v01 DELL B10K 00000015 ASL 00000061) [ 0.023675] ACPI: BOOT 0x00000000000FCF4B 000028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023677] ACPI: ASF! 0x00000000000FCF73 000096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.023680] ACPI: MCFG 0x00000000000FD009 00003C (v01 DELL B10K 00000015 ASL 00000061) [ 0.023682] ACPI: HPET 0x00000000000FD045 000038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023685] ACPI: TCPA 0x00000000000FD2A1 000032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023687] ACPI: DMAR 0x00000000000FD2D3 000110 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023689] ACPI: SRAT 0x00000000DBDF9C44 000570 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023692] ACPI: SLIC 0x00000000000FD07D 000176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.023935] ACPI: Local APIC address 0xfee00000 [ 0.023971] SRAT: PXM 0 -> APIC 0x20 -> Node 0 [ 0.023972] SRAT: PXM 0 -> APIC 0x22 -> Node 0 [ 0.023972] SRAT: PXM 0 -> APIC 0x24 -> Node 0 [ 0.023973] SRAT: PXM 0 -> APIC 0x30 -> Node 0 [ 0.023973] SRAT: PXM 0 -> APIC 0x32 -> Node 0 [ 0.023974] SRAT: PXM 0 -> APIC 0x34 -> Node 0 [ 0.023974] SRAT: PXM 1 -> APIC 0x00 -> Node 1 [ 0.023975] SRAT: PXM 1 -> APIC 0x02 -> Node 1 [ 0.023976] SRAT: PXM 1 -> APIC 0x04 -> Node 1 [ 0.023976] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.023977] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.023977] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.023978] SRAT: PXM 0 -> APIC 0x21 -> Node 0 [ 0.023978] SRAT: PXM 0 -> APIC 0x23 -> Node 0 [ 0.023979] SRAT: PXM 0 -> APIC 0x25 -> Node 0 [ 0.023979] SRAT: PXM 0 -> APIC 0x31 -> Node 0 [ 0.023980] SRAT: PXM 0 -> APIC 0x33 -> Node 0 [ 0.023980] SRAT: PXM 0 -> APIC 0x35 -> Node 0 [ 0.023981] SRAT: PXM 1 -> APIC 0x01 -> Node 1 [ 0.023981] SRAT: PXM 1 -> APIC 0x03 -> Node 1 [ 0.023982] SRAT: PXM 1 -> APIC 0x05 -> Node 1 [ 0.023982] SRAT: PXM 1 -> APIC 0x11 -> Node 1 [ 0.023983] SRAT: PXM 1 -> APIC 0x13 -> Node 1 [ 0.023983] SRAT: PXM 1 -> APIC 0x15 -> Node 1 [ 0.023987] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0xdbffffff] [ 0.023988] ACPI: SRAT: Node 1 PXM 1 [mem 0x100000000-0x623ffffff] [ 0.023988] ACPI: SRAT: Node 0 PXM 0 [mem 0x624000000-0xc23ffffff] [ 0.023990] NUMA: Node 1 [mem 0x00000000-0xdbffffff] + [mem 0x100000000-0x623ffffff] -> [mem 0x00000000-0x623ffffff] [ 0.024000] NODE_DATA(0) allocated [mem 0xc23fd5000-0xc23ffffff] [ 0.024020] NODE_DATA(1) allocated [mem 0x623fd5000-0x623ffffff] [ 0.156602] Zone ranges: [ 0.156605] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.156607] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.156608] Normal [mem 0x0000000100000000-0x0000000c23ffffff] [ 0.156609] Device empty [ 0.156609] Movable zone start for each node [ 0.156612] Early memory node ranges [ 0.156613] node 1: [mem 0x0000000000001000-0x000000000009cfff] [ 0.156614] node 1: [mem 0x0000000000100000-0x00000000dbdf8fff] [ 0.156615] node 1: [mem 0x0000000100000000-0x0000000623ffffff] [ 0.156618] node 0: [mem 0x0000000624000000-0x0000000c23ffffff] [ 0.156834] Zeroed struct page in unavailable ranges: 17003 pages [ 0.156835] Initmem setup node 0 [mem 0x0000000624000000-0x0000000c23ffffff] [ 0.156836] On node 0 totalpages: 6291456 [ 0.156838] Normal zone: 98304 pages used for memmap [ 0.156839] Normal zone: 6291456 pages, LIFO batch:63 [ 0.234170] Initmem setup node 1 [mem 0x0000000000001000-0x0000000623ffffff] [ 0.234173] On node 1 totalpages: 6290837 [ 0.234174] DMA zone: 64 pages used for memmap [ 0.234175] DMA zone: 21 pages reserved [ 0.234176] DMA zone: 3996 pages, LIFO batch:0 [ 0.234256] DMA32 zone: 14008 pages used for memmap [ 0.234257] DMA32 zone: 896505 pages, LIFO batch:63 [ 0.252597] Normal zone: 84224 pages used for memmap [ 0.252599] Normal zone: 5390336 pages, LIFO batch:63 [ 0.364003] ACPI: PM-Timer IO Port: 0x808 [ 0.364006] ACPI: Local APIC address 0xfee00000 [ 0.364018] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.364029] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.364035] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 [ 0.364040] IOAPIC[2]: apic_id 10, version 32, address 0xfec88000, GSI 48-71 [ 0.364042] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.364044] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.364045] ACPI: IRQ0 used by override. [ 0.364046] ACPI: IRQ9 used by override. [ 0.364048] Using ACPI (MADT) for SMP configuration information [ 0.364050] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.364057] smpboot: Allowing 64 CPUs, 40 hotplug CPUs [ 0.364073] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.364074] PM: Registered nosave memory: [mem 0x0009d000-0x000effff] [ 0.364074] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.364076] PM: Registered nosave memory: [mem 0xdbdf9000-0xdbdf9fff] [ 0.364076] PM: Registered nosave memory: [mem 0xdbdfa000-0xdbe4afff] [ 0.364077] PM: Registered nosave memory: [mem 0xdbe4b000-0xdbe4bfff] [ 0.364077] PM: Registered nosave memory: [mem 0xdbe4c000-0xdbe4cfff] [ 0.364078] PM: Registered nosave memory: [mem 0xdbe4d000-0xdbe4dfff] [ 0.364078] PM: Registered nosave memory: [mem 0xdbe4e000-0xdbffffff] [ 0.364079] PM: Registered nosave memory: [mem 0xdc000000-0xf7ffffff] [ 0.364079] PM: Registered nosave memory: [mem 0xf8000000-0xfcffffff] [ 0.364080] PM: Registered nosave memory: [mem 0xfd000000-0xfdffffff] [ 0.364080] PM: Registered nosave memory: [mem 0xfe000000-0xfecfffff] [ 0.364081] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff] [ 0.364081] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.364082] PM: Registered nosave memory: [mem 0xfef00000-0xffafffff] [ 0.364082] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.364084] [mem 0xdc000000-0xf7ffffff] available for PCI devices [ 0.364085] Booting paravirtualized kernel on bare hardware [ 0.364088] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.523274] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2 [ 0.526968] percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u262144 [ 0.526980] pcpu-alloc: s176128 r8192 d28672 u262144 alloc=1*2097152 [ 0.526981] pcpu-alloc: [0] 00 01 02 03 04 05 12 13 [0] 14 15 16 17 24 26 28 30 [ 0.526984] pcpu-alloc: [0] 32 34 36 38 40 42 44 46 [0] 48 50 52 54 56 58 60 62 [ 0.526987] pcpu-alloc: [1] 06 07 08 09 10 11 18 19 [1] 20 21 22 23 25 27 29 31 [ 0.526990] pcpu-alloc: [1] 33 35 37 39 41 43 45 47 [1] 49 51 53 55 57 59 61 63 [ 0.527034] Built 2 zonelists, mobility grouping on. Total pages: 12385672 [ 0.527035] Policy zone: Normal [ 0.527037] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.3.6-200.fc30.x86_64 root=/dev/mapper/XXXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.527151] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.527152] printk: log_buf_len total cpu_extra contributions: 258048 bytes [ 0.527152] printk: log_buf_len min size: 262144 bytes [ 0.527261] printk: log_buf_len: 524288 bytes [ 0.527261] printk: early log buf free: 250448(95%) [ 0.527938] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.709782] Memory: 49399372K/50329172K available (12291K kernel code, 1541K rwdata, 4564K rodata, 2272K init, 4468K bss, 929800K reserved, 0K cma-reserved) [ 0.709792] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0 [ 0.710457] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2 [ 0.710488] Kernel/User page tables isolation: enabled [ 0.710536] ftrace: allocating 40064 entries in 157 pages [ 0.725701] rcu: Hierarchical RCU implementation. [ 0.725702] rcu: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=64. [ 0.725703] Tasks RCU enabled. [ 0.725703] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.725704] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64 [ 0.728797] NR_IRQS: 65792, nr_irqs: 1752, preallocated irqs: 16 [ 0.732507] Console: colour VGA+ 80x25 [ 0.732510] printk: console [tty0] enabled [ 0.732609] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.732612] ACPI: Core revision 20190703 [ 0.833649] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.833661] APIC: Switch to symmetric I/O mode setup [ 0.833663] DMAR: Host address width 40 [ 0.833664] DMAR: DRHD base: 0x000000dfffe000 flags: 0x0 [ 0.833668] DMAR: dmar0: reg_base_addr dfffe000 ver 1:0 cap c90780106f0462 ecap f020fe [ 0.833669] DMAR: DRHD base: 0x000000fedc0000 flags: 0x1 [ 0.833673] DMAR: dmar1: reg_base_addr fedc0000 ver 1:0 cap c90780106f0462 ecap f020fe [ 0.833674] DMAR: RMRR base: 0x000000dbe58000 end: 0x000000dbe6ffff [ 0.833675] DMAR: ATSR flags: 0x0 [ 0.833675] DMAR: ATSR flags: 0x0 [ 0.833677] DMAR-IR: IOAPIC id 10 under DRHD base 0xdfffe000 IOMMU 0 [ 0.833678] DMAR-IR: IOAPIC id 9 under DRHD base 0xfedc0000 IOMMU 1 [ 0.833678] DMAR-IR: IOAPIC id 8 under DRHD base 0xfedc0000 IOMMU 1 [ 0.834291] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.834295] Switched APIC routing to physical flat. [ 0.835180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.839668] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fece58d5bd, max_idle_ns: 440795251644 ns [ 0.839671] Calibrating delay loop (skipped), value calculated using timer frequency.. 6649.64 BogoMIPS (lpj=3324823) [ 0.839673] pid_max: default: 65536 minimum: 512 [ 0.839839] LSM: Security Framework initializing [ 0.839858] Yama: becoming mindful. [ 0.839886] SELinux: Initializing. [ 0.839942] *** VALIDATE SELinux *** [ 0.852188] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc) [ 0.858407] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc) [ 0.858674] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc) [ 0.858865] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc) [ 0.859221] *** VALIDATE proc *** [ 0.859388] *** VALIDATE cgroup1 *** [ 0.859389] *** VALIDATE cgroup2 *** [ 0.859476] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.859484] process: using mwait in idle threads [ 0.859487] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.859488] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.859492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.859494] Spectre V2 : Mitigation: Full generic retpoline [ 0.859494] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.859494] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.859496] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.859496] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.859497] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.859500] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.859659] Freeing SMP alternatives memory: 36K [ 0.860802] smpboot: CPU 0 Converting physical 1 to logical package 0 [ 0.962866] smpboot: CPU0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz (family: 0x6, model: 0x2c, stepping: 0x2) [ 0.963051] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.963057] core: CPUID marked event: 'bus cycles' unavailable [ 0.963059] ... version: 3 [ 0.963059] ... bit width: 48 [ 0.963059] ... generic registers: 4 [ 0.963060] ... value mask: 0000ffffffffffff [ 0.963060] ... max period: 000000007fffffff [ 0.963061] ... fixed-purpose events: 3 [ 0.963061] ... event mask: 000000070000000f [ 0.963144] rcu: Hierarchical SRCU implementation. [ 0.966844] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.967640] smp: Bringing up secondary CPUs ... [ 0.967761] x86: Booting SMP configuration: [ 0.967762] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.976801] .... node #1, CPUs: #6 [ 0.106406] smpboot: CPU 6 Converting physical 0 to logical package 1 [ 0.106406] smpboot: CPU 6 Converting physical 0 to logical die 1 [ 1.037790] #7 #8 #9 #10 #11 [ 1.046830] .... node #0, CPUs: #12 [ 1.048782] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 1.048832] #13 #14 #15 #16 #17 [ 1.057846] .... node #1, CPUs: #18 #19 #20 #21 #22 #23 [ 1.068757] smp: Brought up 2 nodes, 24 CPUs [ 1.068757] smpboot: Max logical packages: 6 [ 1.068757] smpboot: Total of 24 processors activated (159592.68 BogoMIPS) [ 1.073423] devtmpfs: initialized [ 1.073701] x86/mm: Memory block size: 128MB [ 1.080544] PM: Registering ACPI NVS region [mem 0xdbdf9c00-0xdbe4bbff] (335872 bytes) [ 1.080681] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.080725] futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc) [ 1.081098] pinctrl core: initialized pinctrl subsystem [ 1.081230] PM: RTC time: 20:06:23, date: 2019-10-26 [ 1.081504] NET: Registered protocol family 16 [ 1.081737] cpuidle: using governor menu [ 1.081775] Simple Boot Flag at 0x7a set to 0x1 [ 1.081823] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.081824] ACPI: bus type PCI registered [ 1.081825] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.082011] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 1.082014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 1.082028] PCI: Using configuration type 1 for base access [ 1.085679] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 1.088681] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.088681] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.243874] cryptd: max_cpu_qlen set to 1000 [ 1.248682] alg: No test for lzo-rle (lzo-rle-generic) [ 1.248685] alg: No test for lzo-rle (lzo-rle-scomp) [ 1.248685] alg: No test for 842 (842-generic) [ 1.248685] alg: No test for 842 (842-scomp) [ 1.251831] ACPI: Added _OSI(Module Device) [ 1.251832] ACPI: Added _OSI(Processor Device) [ 1.251832] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.251833] ACPI: Added _OSI(Processor Aggregator Device) [ 1.251834] ACPI: Added _OSI(Linux-Dell-Video) [ 1.251835] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.251835] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.333504] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.340812] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.357661] ACPI: Interpreter enabled [ 1.357684] ACPI: (supports S0 S3 S4 S5) [ 1.357685] ACPI: Using IOAPIC for interrupt routing [ 1.357801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.358021] ACPI: Enabled 16 GPEs in block 00 to 3F [ 1.512916] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) [ 1.512916] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.512916] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.528865] PCI host bridge to bus 0000:00 [ 1.528868] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.528869] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 1.528870] pci_bus 0000:00: root bus resource [io 0x03bc-0x03bf window] [ 1.528871] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 1.528872] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.528873] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window] [ 1.528874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.528874] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window] [ 1.528875] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 1.528876] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 1.528877] pci_bus 0000:00: root bus resource [mem 0xdbf00000-0xdeffffff window] [ 1.528878] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window] [ 1.528879] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window] [ 1.528880] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window] [ 1.528881] pci_bus 0000:00: root bus resource [bus 00-7f] [ 1.528894] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 1.528928] pci 0000:00:00.0: enabling Extended Tags [ 1.528965] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.529316] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 1.529349] pci 0000:00:01.0: enabling Extended Tags [ 1.529389] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.529748] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 1.529783] pci 0000:00:03.0: enabling Extended Tags [ 1.529822] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.530175] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 1.530209] pci 0000:00:07.0: enabling Extended Tags [ 1.530248] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.530603] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 1.530983] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 1.531359] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 1.531753] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 1.531797] pci 0000:00:1a.0: reg 0x20: [io 0x1f20-0x1f3f] [ 1.532164] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 1.532208] pci 0000:00:1a.1: reg 0x20: [io 0x1f00-0x1f1f] [ 1.532575] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 1.532619] pci 0000:00:1a.2: reg 0x20: [io 0x1c00-0x1c1f] [ 1.532988] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 1.533009] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ffa000-0xf7ffa3ff] [ 1.533090] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.533429] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 1.533451] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ffc000-0xf7ffffff 64bit] [ 1.533524] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.533863] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 1.533945] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.534297] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 1.534378] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.534731] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 1.534774] pci 0000:00:1d.0: reg 0x20: [io 0x1f80-0x1f9f] [ 1.535141] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 1.535185] pci 0000:00:1d.1: reg 0x20: [io 0x1f60-0x1f7f] [ 1.535557] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 1.535600] pci 0000:00:1d.2: reg 0x20: [io 0x1f40-0x1f5f] [ 1.535973] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 1.535994] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff] [ 1.536075] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.536405] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.536801] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 1.536881] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 1.536885] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO [ 1.536888] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 1.536890] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 1.536892] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f) [ 1.537253] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 1.537271] pci 0000:00:1f.2: reg 0x10: [io 0x1e00-0x1e07] [ 1.537278] pci 0000:00:1f.2: reg 0x14: [io 0x1e10-0x1e13] [ 1.537284] pci 0000:00:1f.2: reg 0x18: [io 0x1e20-0x1e27] [ 1.537291] pci 0000:00:1f.2: reg 0x1c: [io 0x1e30-0x1e33] [ 1.537298] pci 0000:00:1f.2: reg 0x20: [io 0x1ec0-0x1edf] [ 1.537305] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff] [ 1.537344] pci 0000:00:1f.2: PME# supported from D3hot [ 1.537679] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 1.537696] pci 0000:00:1f.3: reg 0x10: [mem 0xf7ffb000-0xf7ffb0ff 64bit] [ 1.537715] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff] [ 1.538094] pci 0000:01:00.0: [12d8:e130] type 01 class 0x060400 [ 1.538141] pci 0000:01:00.0: enabling Extended Tags [ 1.538148] pci 0000:01:00.0: Enable PCIe Retrain Link quirk [ 1.538194] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.540688] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 1.540694] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 1.540731] pci_bus 0000:02: extended config space not accessible [ 1.540779] pci 0000:01:00.0: PCI bridge to [bus 02] [ 1.540833] pci 0000:03:00.0: [1002:68f9] type 00 class 0x030000 [ 1.540852] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.540862] pci 0000:03:00.0: reg 0x18: [mem 0xf7de0000-0xf7dfffff 64bit] [ 1.540868] pci 0000:03:00.0: reg 0x20: [io 0xdc00-0xdcff] [ 1.540880] pci 0000:03:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref] [ 1.540885] pci 0000:03:00.0: enabling Extended Tags [ 1.540923] pci 0000:03:00.0: supports D1 D2 [ 1.540980] pci 0000:03:00.1: [1002:aa68] type 00 class 0x040300 [ 1.540999] pci 0000:03:00.1: reg 0x10: [mem 0xf7ddc000-0xf7ddffff 64bit] [ 1.541031] pci 0000:03:00.1: enabling Extended Tags [ 1.541067] pci 0000:03:00.1: supports D1 D2 [ 1.543689] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.543693] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 1.543697] pci 0000:00:03.0: bridge window [mem 0xf7d00000-0xf7efffff] [ 1.543702] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.543753] pci 0000:00:07.0: PCI bridge to [bus 04] [ 1.543760] pci 0000:00:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 1.543807] pci 0000:05:00.0: [1000:0058] type 00 class 0x010000 [ 1.543829] pci 0000:05:00.0: reg 0x10: [io 0xcc00-0xccff] [ 1.543844] pci 0000:05:00.0: reg 0x14: [mem 0xf79ec000-0xf79effff 64bit] [ 1.543858] pci 0000:05:00.0: reg 0x1c: [mem 0xf79f0000-0xf79fffff 64bit] [ 1.543877] pci 0000:05:00.0: reg 0x30: [mem 0xf7a00000-0xf7afffff pref] [ 1.543885] pci 0000:05:00.0: enabling Extended Tags [ 1.543941] pci 0000:05:00.0: supports D1 D2 [ 1.543965] pci 0000:05:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:1c.0 (capable of 16.000 Gb/s with 2.5 GT/s x8 link) [ 1.546697] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.546701] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 1.546705] pci 0000:00:1c.0: bridge window [mem 0xf7900000-0xf7afffff] [ 1.546775] pci 0000:06:00.0: [14e4:1681] type 00 class 0x020000 [ 1.546813] pci 0000:06:00.0: reg 0x10: [mem 0xf78e0000-0xf78effff 64bit] [ 1.546830] pci 0000:06:00.0: reg 0x18: [mem 0xf78f0000-0xf78fffff 64bit] [ 1.546872] pci 0000:06:00.0: enabling Extended Tags [ 1.546972] pci 0000:06:00.0: PME# supported from D3hot D3cold [ 1.547089] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 1.547093] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 1.547113] pci_bus 0000:07: extended config space not accessible [ 1.547142] pci 0000:07:0a.0: [104c:8023] type 00 class 0x0c0010 [ 1.547158] pci 0000:07:0a.0: reg 0x10: [mem 0xf77fb000-0xf77fb7ff] [ 1.547167] pci 0000:07:0a.0: reg 0x14: [mem 0xf77fc000-0xf77fffff] [ 1.547236] pci 0000:07:0a.0: supports D1 D2 [ 1.547237] pci 0000:07:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.547296] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.547301] pci 0000:00:1e.0: bridge window [mem 0xf7700000-0xf77fffff] [ 1.547305] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.547306] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode) [ 1.547307] pci 0000:00:1e.0: bridge window [io 0x03bc-0x03bf window] (subtractive decode) [ 1.547308] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode) [ 1.547309] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.547310] pci 0000:00:1e.0: bridge window [io 0x0d00-0xefff window] (subtractive decode) [ 1.547311] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.547312] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode) [ 1.547313] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) [ 1.547314] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 1.547315] pci 0000:00:1e.0: bridge window [mem 0xdbf00000-0xdeffffff window] (subtractive decode) [ 1.547316] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff window] (subtractive decode) [ 1.547317] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode) [ 1.547318] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode) [ 1.578282] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus 20-3d]) [ 1.578285] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.589722] PCI host bridge to bus 0000:20 [ 1.589724] pci_bus 0000:20: root bus resource [io 0xf000-0xffff window] [ 1.589725] pci_bus 0000:20: root bus resource [mem 0xdf000000-0xdfffffff window] [ 1.589726] pci_bus 0000:20: root bus resource [mem 0x000a0000-0x000b0000 window] [ 1.589728] pci_bus 0000:20: busn_res: can not insert [bus 20-3d] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 1.589729] pci_bus 0000:20: root bus resource [bus 20-3d] [ 1.589740] pci 0000:20:03.0: [8086:340a] type 01 class 0x060400 [ 1.589769] pci 0000:20:03.0: enabling Extended Tags [ 1.589802] pci 0000:20:03.0: PME# supported from D0 D3hot D3cold [ 1.590050] pci 0000:20:07.0: [8086:340e] type 01 class 0x060400 [ 1.590079] pci 0000:20:07.0: enabling Extended Tags [ 1.590112] pci 0000:20:07.0: PME# supported from D0 D3hot D3cold [ 1.590357] pci 0000:20:09.0: [8086:3410] type 01 class 0x060400 [ 1.590384] pci 0000:20:09.0: enabling Extended Tags [ 1.590414] pci 0000:20:09.0: PME# supported from D0 D3hot D3cold [ 1.590663] pci 0000:20:14.0: [8086:342e] type 00 class 0x080000 [ 1.590930] pci 0000:20:14.1: [8086:3422] type 00 class 0x080000 [ 1.591195] pci 0000:20:14.2: [8086:3423] type 00 class 0x080000 [ 1.591487] pci 0000:20:03.0: PCI bridge to [bus 22] [ 1.591490] pci 0000:20:03.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 1.591522] pci 0000:20:07.0: PCI bridge to [bus 23] [ 1.591525] pci 0000:20:07.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 1.591553] pci 0000:20:09.0: PCI bridge to [bus 24] [ 1.591556] pci 0000:20:09.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 1.592317] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.593239] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.594159] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.595099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.596024] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.596963] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.597882] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.598805] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.599402] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 1.599402] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.599402] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.599402] vgaarb: loaded [ 1.599402] SCSI subsystem initialized [ 1.599712] libata version 3.00 loaded. [ 1.599712] ACPI: bus type USB registered [ 1.599720] usbcore: registered new interface driver usbfs [ 1.599725] usbcore: registered new interface driver hub [ 1.599808] usbcore: registered new device driver usb [ 1.599840] pps_core: LinuxPPS API ver. 1 registered [ 1.599841] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 1.599843] PTP clock support registered [ 1.599896] EDAC MC: Ver: 3.0.0 [ 1.599896] PCI: Using ACPI for IRQ routing [ 1.601039] PCI: Discovered peer bus 3e [ 1.601040] PCI: root bus 3e: using default resources [ 1.601040] PCI: Probing PCI hardware (bus 3e) [ 1.601056] PCI host bridge to bus 0000:3e [ 1.601057] pci_bus 0000:3e: root bus resource [io 0x0000-0xffff] [ 1.601058] pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff] [ 1.601059] pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff] [ 1.601061] pci_bus 0000:3e: busn_res: can not insert [bus 3e-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 1.601064] pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000 [ 1.601097] pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000 [ 1.601136] pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000 [ 1.601172] pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000 [ 1.601201] pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000 [ 1.601236] pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000 [ 1.601278] pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000 [ 1.601314] pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000 [ 1.601343] pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000 [ 1.601378] pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000 [ 1.601407] pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000 [ 1.601442] pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000 [ 1.601473] pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000 [ 1.601509] pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000 [ 1.601539] pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000 [ 1.601574] pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000 [ 1.601604] pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000 [ 1.601639] pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000 [ 1.601677] pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000 [ 1.601707] pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000 [ 1.601743] pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000 [ 1.601772] pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000 [ 1.601812] pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000 [ 1.601841] pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000 [ 1.601885] pci_bus 0000:3e: busn_res: [bus 3e-ff] end is updated to 3e [ 1.601886] pci_bus 0000:3e: busn_res: can not insert [bus 3e] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 1.601892] PCI: Discovered peer bus 3f [ 1.601893] PCI: root bus 3f: using default resources [ 1.601893] PCI: Probing PCI hardware (bus 3f) [ 1.601909] PCI host bridge to bus 0000:3f [ 1.601911] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 1.601912] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff] [ 1.601913] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 1.601914] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 1.601917] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000 [ 1.601956] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000 [ 1.601990] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000 [ 1.602027] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000 [ 1.602058] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000 [ 1.602096] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000 [ 1.602129] pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000 [ 1.602167] pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000 [ 1.602198] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000 [ 1.602236] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000 [ 1.602267] pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000 [ 1.602305] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000 [ 1.602336] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000 [ 1.602374] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000 [ 1.602414] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000 [ 1.602445] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000 [ 1.602486] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000 [ 1.602517] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000 [ 1.602555] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000 [ 1.602586] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000 [ 1.602627] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000 [ 1.602657] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000 [ 1.602701] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000 [ 1.602732] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000 [ 1.602780] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 1.602782] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 1.602787] PCI: pci_cache_line_size set to 64 bytes [ 1.602821] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xff970000-0xff9707ff]: no compatible bridge window [ 1.602886] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 1.602887] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.602888] e820: reserve RAM buffer [mem 0xdbdf9c00-0xdbffffff] [ 1.603029] NetLabel: Initializing [ 1.603030] NetLabel: domain hash size = 128 [ 1.603030] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.603044] NetLabel: unlabeled traffic allowed by default [ 1.603048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.603048] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.604714] clocksource: Switched to clocksource tsc-early [ 1.621436] VFS: Disk quotas dquot_6.6.0 [ 1.621515] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.621558] *** VALIDATE hugetlbfs *** [ 1.621641] pnp: PnP ACPI init [ 1.624348] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 1.624349] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 1.624406] system 00:00: [io 0x0c00-0x0c7f] has been reserved [ 1.624412] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.624641] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.636784] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.648639] pnp: PnP ACPI: found 3 devices [ 1.649802] thermal_sys: Registered thermal governor 'fair_share' [ 1.649803] thermal_sys: Registered thermal governor 'bang_bang' [ 1.649804] thermal_sys: Registered thermal governor 'step_wise' [ 1.649804] thermal_sys: Registered thermal governor 'user_space' [ 1.654342] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.654421] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0000000-0xf00007ff] [ 1.654425] pci 0000:01:00.0: PCI bridge to [bus 02] [ 1.654435] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 1.654438] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 1.654444] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.654445] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 1.654448] pci 0000:00:03.0: bridge window [mem 0xf7d00000-0xf7efffff] [ 1.654450] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.654454] pci 0000:00:07.0: PCI bridge to [bus 04] [ 1.654457] pci 0000:00:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 1.654462] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.654464] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 1.654468] pci 0000:00:1c.0: bridge window [mem 0xf7900000-0xf7afffff] [ 1.654474] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 1.654477] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 1.654484] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.654487] pci 0000:00:1e.0: bridge window [mem 0xf7700000-0xf77fffff] [ 1.654494] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.654495] pci_bus 0000:00: resource 5 [io 0x03b0-0x03bb window] [ 1.654496] pci_bus 0000:00: resource 6 [io 0x03bc-0x03bf window] [ 1.654496] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df window] [ 1.654497] pci_bus 0000:00: resource 8 [io 0x03e0-0x0cf7 window] [ 1.654498] pci_bus 0000:00: resource 9 [io 0x0d00-0xefff window] [ 1.654499] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 1.654500] pci_bus 0000:00: resource 11 [mem 0x000c0000-0x000effff window] [ 1.654501] pci_bus 0000:00: resource 12 [mem 0x000f0000-0x000fffff window] [ 1.654502] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xf7ffffff window] [ 1.654503] pci_bus 0000:00: resource 14 [mem 0xdbf00000-0xdeffffff window] [ 1.654504] pci_bus 0000:00: resource 15 [mem 0xff980000-0xff980fff window] [ 1.654505] pci_bus 0000:00: resource 16 [mem 0xff97c000-0xff97ffff window] [ 1.654506] pci_bus 0000:00: resource 17 [mem 0xfed20000-0xfed9ffff window] [ 1.654507] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 1.654508] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.654509] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7efffff] [ 1.654509] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 1.654510] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 1.654511] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 1.654512] pci_bus 0000:05: resource 1 [mem 0xf7900000-0xf7afffff] [ 1.654513] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff] [ 1.654514] pci_bus 0000:07: resource 1 [mem 0xf7700000-0xf77fffff] [ 1.654515] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.654516] pci_bus 0000:07: resource 5 [io 0x03b0-0x03bb window] [ 1.654517] pci_bus 0000:07: resource 6 [io 0x03bc-0x03bf window] [ 1.654518] pci_bus 0000:07: resource 7 [io 0x03c0-0x03df window] [ 1.654519] pci_bus 0000:07: resource 8 [io 0x03e0-0x0cf7 window] [ 1.654520] pci_bus 0000:07: resource 9 [io 0x0d00-0xefff window] [ 1.654520] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window] [ 1.654521] pci_bus 0000:07: resource 11 [mem 0x000c0000-0x000effff window] [ 1.654522] pci_bus 0000:07: resource 12 [mem 0x000f0000-0x000fffff window] [ 1.654523] pci_bus 0000:07: resource 13 [mem 0xe0000000-0xf7ffffff window] [ 1.654524] pci_bus 0000:07: resource 14 [mem 0xdbf00000-0xdeffffff window] [ 1.654525] pci_bus 0000:07: resource 15 [mem 0xff980000-0xff980fff window] [ 1.654526] pci_bus 0000:07: resource 16 [mem 0xff97c000-0xff97ffff window] [ 1.654527] pci_bus 0000:07: resource 17 [mem 0xfed20000-0xfed9ffff window] [ 1.654546] pci 0000:20:03.0: PCI bridge to [bus 22] [ 1.654549] pci 0000:20:03.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 1.654553] pci 0000:20:07.0: PCI bridge to [bus 23] [ 1.654556] pci 0000:20:07.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 1.654560] pci 0000:20:09.0: PCI bridge to [bus 24] [ 1.654562] pci 0000:20:09.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 1.654567] pci_bus 0000:20: resource 4 [io 0xf000-0xffff window] [ 1.654568] pci_bus 0000:20: resource 5 [mem 0xdf000000-0xdfffffff window] [ 1.654569] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000b0000 window] [ 1.654570] pci_bus 0000:22: resource 1 [mem 0xdfe00000-0xdfefffff] [ 1.654571] pci_bus 0000:23: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 1.654572] pci_bus 0000:24: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 1.654577] pci_bus 0000:3e: resource 4 [io 0x0000-0xffff] [ 1.654578] pci_bus 0000:3e: resource 5 [mem 0x00000000-0xffffffffff] [ 1.654581] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 1.654581] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xffffffffff] [ 1.654675] NET: Registered protocol family 2 [ 1.655052] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, vmalloc) [ 1.655293] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc) [ 1.655964] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc) [ 1.656115] TCP: Hash tables configured (established 524288 bind 65536) [ 1.656290] UDP hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc) [ 1.656501] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc) [ 1.656881] NET: Registered protocol family 1 [ 1.656886] NET: Registered protocol family 44 [ 1.663449] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.663457] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 1.663540] PCI: CLS 64 bytes, default 64 [ 1.663616] Trying to unpack rootfs image as initramfs... [ 2.046036] Freeing initrd memory: 27848K [ 2.052732] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.052735] software IO TLB: mapped [mem 0xd7df9000-0xdbdf9000] (64MB) [ 2.057932] Initialise system trusted keyrings [ 2.057947] Key type blacklist registered [ 2.058000] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 2.059490] zbud: loaded [ 2.060534] Platform Keyring initialized [ 2.064674] NET: Registered protocol family 38 [ 2.064677] Key type asymmetric registered [ 2.064678] Asymmetric key parser 'x509' registered [ 2.064685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 2.064762] io scheduler mq-deadline registered [ 2.064763] io scheduler kyber registered [ 2.064798] io scheduler bfq registered [ 2.065020] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 2.069341] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.069362] intel_idle: MWAIT substates: 0x1120 [ 2.069362] intel_idle: v0.4.1 model 0x2C [ 2.070292] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.070388] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.070428] ACPI: Power Button [VBTN] [ 2.070459] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.070473] ACPI: Power Button [PWRF] [ 2.071422] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.092046] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.094091] Non-volatile memory driver v1.3 [ 2.094125] Linux agpgart interface v0.103 [ 2.098146] ahci 0000:00:1f.2: version 3.0 [ 2.098925] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode [ 2.098928] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ccc ems sxs [ 2.108514] scsi host0: ahci [ 2.109132] scsi host1: ahci [ 2.109541] scsi host2: ahci [ 2.110073] scsi host3: ahci [ 2.110609] scsi host4: ahci [ 2.111160] scsi host5: ahci [ 2.111259] ata1: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000100 irq 32 [ 2.111261] ata2: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000180 irq 33 [ 2.111263] ata3: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000200 irq 34 [ 2.111264] ata4: DUMMY [ 2.111265] ata5: DUMMY [ 2.111267] ata6: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000380 irq 37 [ 2.111428] libphy: Fixed MDIO Bus: probed [ 2.111616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.111623] ehci-pci: EHCI PCI platform driver [ 2.112190] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 2.112229] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.112241] ehci-pci 0000:00:1a.7: debug port 1 [ 2.116158] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 2.116176] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ffa000 [ 2.122736] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.122806] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.122809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.122811] usb usb1: Product: EHCI Host Controller [ 2.122813] usb usb1: Manufacturer: Linux 5.3.6-200.fc30.x86_64 ehci_hcd [ 2.122815] usb usb1: SerialNumber: ... [ 2.123051] hub 1-0:1.0: USB hub found [ 2.123064] hub 1-0:1.0: 6 ports detected [ 2.123636] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.123780] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.123795] ehci-pci 0000:00:1d.7: debug port 1 [ 2.127694] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.127707] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000 [ 2.133740] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.133800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.133803] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.133804] usb usb2: Product: EHCI Host Controller [ 2.133806] usb usb2: Manufacturer: Linux 5.3.6-200.fc30.x86_64 ehci_hcd [ 2.133808] usb usb2: SerialNumber: ... [ 2.134074] hub 2-0:1.0: USB hub found [ 2.134085] hub 2-0:1.0: 6 ports detected [ 2.134232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.134236] ohci-pci: OHCI PCI platform driver [ 2.134248] uhci_hcd: USB Universal Host Controller Interface driver [ 2.134655] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.134751] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.134757] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.134785] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001f20 [ 2.134834] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.134835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.134836] usb usb3: Product: UHCI Host Controller [ 2.134837] usb usb3: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.134838] usb usb3: SerialNumber: ... [ 2.135043] hub 3-0:1.0: USB hub found [ 2.135056] hub 3-0:1.0: 2 ports detected [ 2.135557] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.135698] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.135704] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.135742] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001f00 [ 2.135812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.135813] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.135814] usb usb4: Product: UHCI Host Controller [ 2.135815] usb usb4: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.135816] usb usb4: SerialNumber: ... [ 2.136041] hub 4-0:1.0: USB hub found [ 2.136053] hub 4-0:1.0: 2 ports detected [ 2.136543] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.136601] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.136606] uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.136623] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001c00 [ 2.136659] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.136661] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.136662] usb usb5: Product: UHCI Host Controller [ 2.136662] usb usb5: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.136663] usb usb5: SerialNumber: ... [ 2.136793] hub 5-0:1.0: USB hub found [ 2.136800] hub 5-0:1.0: 2 ports detected [ 2.137301] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.137429] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.137435] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.137457] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001f80 [ 2.137500] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.137501] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.137502] usb usb6: Product: UHCI Host Controller [ 2.137503] usb usb6: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.137504] usb usb6: SerialNumber: ... [ 2.137632] hub 6-0:1.0: USB hub found [ 2.137637] hub 6-0:1.0: 2 ports detected [ 2.138112] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.138198] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.138204] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.138222] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001f60 [ 2.138264] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.138266] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.138266] usb usb7: Product: UHCI Host Controller [ 2.138267] usb usb7: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.138268] usb usb7: SerialNumber: ... [ 2.138369] hub 7-0:1.0: USB hub found [ 2.138374] hub 7-0:1.0: 2 ports detected [ 2.138912] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.138981] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.138986] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.139015] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001f40 [ 2.139051] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.139052] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.139053] usb usb8: Product: UHCI Host Controller [ 2.139054] usb usb8: Manufacturer: Linux 5.3.6-200.fc30.x86_64 uhci_hcd [ 2.139055] usb usb8: SerialNumber: ... [ 2.139165] hub 8-0:1.0: USB hub found [ 2.139169] hub 8-0:1.0: 2 ports detected [ 2.139286] usbcore: registered new interface driver usbserial_generic [ 2.139291] usbserial: USB Serial support registered for generic [ 2.139304] i8042: PNP: No PS/2 controller found. [ 2.139304] i8042: Probing ports directly. [ 2.142146] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.142151] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.142257] mousedev: PS/2 mouse device common for all mice [ 2.142355] rtc_cmos 00:01: RTC can wake from S4 [ 2.162560] rtc_cmos 00:01: registered as rtc0 [ 2.162562] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs [ 2.162631] device-mapper: uevent: version 1.0.3 [ 2.162810] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 2.162963] intel_pstate: CPU model not supported [ 2.163384] hidraw: raw HID events driver (C) Jiri Kosina [ 2.163431] usbcore: registered new interface driver usbhid [ 2.163431] usbhid: USB HID core driver [ 2.163531] drop_monitor: Initializing network drop monitor service [ 2.163647] Initializing XFRM netlink socket [ 2.163883] NET: Registered protocol family 10 [ 2.169302] Segment Routing with IPv6 [ 2.169319] mip6: Mobile IPv6 [ 2.169321] NET: Registered protocol family 17 [ 2.172601] RAS: Correctable Errors collector initialized. [ 2.172655] microcode: sig=0x206c2, pf=0x1, revision=0x1f [ 2.173659] microcode: Microcode Update Driver: v2.2. [ 2.173669] SSE version of gcm_enc/dec engaged. [ 2.214199] sched_clock: Marking stable (2108776384, 105406607)->(2280995224, -66812233) [ 2.217443] registered taskstats version 1 [ 2.217455] Loading compiled-in X.509 certificates [ 2.256277] Loaded X.509 cert 'Fedora kernel signing key: eb1bd540d5b42add51d392bbcf882902fa2b3db9' [ 2.256325] zswap: loaded using pool lzo/zbud [ 2.267066] Key type big_key registered [ 2.270947] Key type encrypted registered [ 2.270958] ima: No TPM chip found, activating TPM-bypass! [ 2.270966] ima: Allocated hash algorithm: sha256 [ 2.270978] No architecture policies found [ 2.271479] PM: Magic number: 7:167:145 [ 2.271495] ata_port ata2: hash matches [ 2.271496] ata2: hash matches [ 2.271590] memory memory282: hash matches [ 2.272607] rtc_cmos 00:01: setting system clock to 2019-10-26T20:06:25 UTC (1572120385) [ 2.415919] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.421725] ata1.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, D100, max UDMA/100 [ 2.423914] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.423934] ata6: SATA link down (SStatus 0 SControl 300) [ 2.424013] ata3: SATA link down (SStatus 0 SControl 300) [ 2.424818] ata1.00: configured for UDMA/100 [ 2.428874] ata2.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB, AXM08D1Q, max UDMA/133 [ 2.428877] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.430605] ata2.00: configured for UDMA/133 [ 2.437049] scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353C D100 PQ: 0 ANSI: 5 [ 2.443736] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.546522] sr 0:0:0:0: [sr0] scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray [ 2.546524] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.547384] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.547564] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.548263] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 8D1Q PQ: 0 ANSI: 5 [ 2.548754] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.549102] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.549119] sd 1:0:0:0: [sda] Write Protect is off [ 2.549121] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.549146] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.551070] sda: sda1 sda2 [ 2.552767] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.556808] Freeing unused decrypted memory: 2040K [ 2.559363] Freeing unused kernel image memory: 2272K [ 2.561753] Write protecting the kernel read-only data: 20480k [ 2.568004] Freeing unused kernel image memory: 2016K [ 2.571896] Freeing unused kernel image memory: 1580K [ 2.578464] usb 1-1: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11 [ 2.578466] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.578467] usb 1-1: Product: USB2.0 Hub [ 2.578468] usb 1-1: Manufacturer: VIA Labs, Inc. [ 2.579371] hub 1-1:1.0: USB hub found [ 2.580210] hub 1-1:1.0: 4 ports detected [ 2.582464] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.582469] rodata_test: all tests were successful [ 2.582470] x86/mm: Checking user space page tables [ 2.591590] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.591592] Run /init as init process [ 2.614796] systemd[1]: systemd v241-12.git323cdf4.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.627914] systemd[1]: Detected architecture x86-64. [ 2.627916] systemd[1]: Running in initial RAM disk. [ 2.639823] systemd[1]: Set hostname to ... [ 2.701075] random: systemd: uninitialized urandom read (16 bytes read) [ 2.701088] systemd[1]: Reached target Slices. [ 2.701184] random: systemd: uninitialized urandom read (16 bytes read) [ 2.701238] systemd[1]: Listening on Journal Audit Socket. [ 2.701251] random: systemd: uninitialized urandom read (16 bytes read) [ 2.701258] systemd[1]: Reached target Swap. [ 2.701345] systemd[1]: Listening on Journal Socket. [ 2.705275] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.706207] systemd[1]: Starting Load Kernel Modules... [ 2.708785] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.747605] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.757849] Bridge firewalling registered [ 2.839687] usb 1-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 2.839689] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.839690] usb 1-2: Product: ASM1153E [ 2.839691] usb 1-2: Manufacturer: Inateck [ 2.839692] usb 1-2: SerialNumber: ... [ 2.917688] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 3.018487] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11 [ 3.018489] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.018490] usb 1-1.4: Product: USB2.0 Hub [ 3.018491] usb 1-1.4: Manufacturer: VIA Labs, Inc. [ 3.019388] hub 1-1.4:1.0: USB hub found [ 3.020234] hub 1-1.4:1.0: 4 ports detected [ 3.105731] tsc: Refined TSC clocksource calibration: 3324.999 MHz [ 3.106578] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fed8c1abef, max_idle_ns: 440795363067 ns [ 3.106725] clocksource: Switched to clocksource tsc [ 3.127729] usb 1-3: new high-speed USB device number 5 using ehci-pci [ 3.168925] usbcore: registered new interface driver usb-storage [ 3.176302] scsi host6: uas [ 3.176404] usbcore: registered new interface driver uas [ 3.177583] scsi 6:0:0:0: Direct-Access Inateck ASM1153E 0 PQ: 0 ANSI: 6 [ 3.179224] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.181079] sd 6:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.181082] sd 6:0:0:0: [sdb] 4096-byte physical blocks [ 3.181576] sd 6:0:0:0: [sdb] Write Protect is off [ 3.181578] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.182354] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.182854] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 3.262351] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 3.264323] usb 1-3: New USB device found, idVendor=fafa, idProduct=fafa, bcdDevice= 1.02 [ 3.264325] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.264327] usb 1-3: SerialNumber: ... [ 3.264605] usb-storage 1-3:1.0: USB Mass Storage device detected [ 3.266032] scsi host7: usb-storage 1-3:1.0 [ 3.271754] Fusion MPT base driver 3.04.20 [ 3.271755] Copyright (c) 3DE9-49E0 LSI Corporation [ 3.285112] tg3.c:v3.137 (May 11, 2014) [ 3.295402] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 3.295405] tg3 0000:06:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.295407] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.295409] tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.296492] Fusion MPT SAS Host driver 3.04.20 [ 3.296970] mptbase: ioc0: Initiating bringup [ 3.304454] random: fast init done [ 3.336611] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 3.338687] usb 1-1.4.4: new high-speed USB device number 6 using ehci-pci [ 3.339776] firewire_ohci 0000:07:0a.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 3.413365] [drm] radeon kernel modesetting enabled. [ 3.413438] radeon 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 3.413440] radeon 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf7de0000 -> 0xf7dfffff [ 3.413442] radeon 0000:03:00.0: vgaarb: deactivate vga console [ 3.414007] Console: switching to colour dummy device 80x25 [ 3.414603] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2181 0x00). [ 3.414686] ATOM BIOS: Cedar [ 3.414763] radeon 0000:03:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 3.414764] radeon 0000:03:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF [ 3.414767] [drm] Detected VRAM RAM=512M, BAR=256M [ 3.414768] [drm] RAM width 64bits DDR [ 3.414931] [TTM] Zone kernel: Available graphics memory: 24717582 KiB [ 3.414931] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.414932] [TTM] Initializing pool allocator [ 3.414936] [TTM] Initializing DMA pool allocator [ 3.414955] [drm] radeon: 512M of VRAM memory ready [ 3.414958] [drm] radeon: 1024M of GTT memory ready. [ 3.414966] [drm] Loading CEDAR Microcode [ 3.415030] [drm] Internal thermal controller with fan control [ 3.438182] usb 1-1.4.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14 [ 3.438184] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.438185] usb 1-1.4.4: Product: USB2.0 Hub [ 3.438187] usb 1-1.4.4: Manufacturer: VIA Labs, Inc. [ 3.439112] hub 1-1.4.4:1.0: USB hub found [ 3.440075] hub 1-1.4.4:1.0: 4 ports detected [ 3.444199] [drm] radeon: dpm initialized [ 3.444285] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.445351] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3.454933] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 3.455111] radeon 0000:03:00.0: WB enabled [ 3.455114] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x(____ptrval____) [ 3.455115] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x(____ptrval____) [ 3.455846] radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____) [ 3.455848] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.455849] [drm] Driver supports precise vblank timestamp query. [ 3.455853] radeon 0000:03:00.0: radeon: MSI limited to 32-bit [ 3.455912] radeon 0000:03:00.0: radeon: using MSI. [ 3.455938] [drm] radeon: irq initialized. [ 3.473247] [drm] ring test on 0 succeeded in 1 usecs [ 3.473256] [drm] ring test on 3 succeeded in 2 usecs [ 3.549740] usb 1-4: new high-speed USB device number 7 using ehci-pci [ 3.644767] ioc0: LSISAS1068E B3: Capabilities={Initiator} [ 3.650342] [drm] ring test on 5 succeeded in 1 usecs [ 3.650347] [drm] UVD initialized successfully. [ 3.650497] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.650570] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.730645] usb 1-4: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 5.01 [ 3.730646] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.730647] usb 1-4: Product: USB3.0 Device [ 3.730648] usb 1-4: Manufacturer: USB3.0 Device [ 3.730649] usb 1-4: SerialNumber: ... [ 3.731419] scsi host8: uas [ 3.732455] scsi 8:0:0:0: Direct-Access SAMSUNG SSD UM410 Series 0501 PQ: 0 ANSI: 6 [ 3.733961] scsi 8:0:0:0: Attached scsi generic sg3 type 0 [ 3.735699] sd 8:0:0:0: [sdc] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 3.735700] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 3.736060] sd 8:0:0:0: [sdc] Write Protect is off [ 3.736061] sd 8:0:0:0: [sdc] Mode Sense: 5f 00 00 08 [ 3.736781] sd 8:0:0:0: [sdc] Disabling FUA [ 3.736783] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.737055] sd 8:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 3.809721] usb 1-XXX.XXX.XXX.XXX: new full-speed USB device number 8 using ehci-pci [ 3.841972] firewire_core 0000:07:0a.0: created device fw0: GUID 807303182dac4e00, S400 [ 3.907747] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03 [ 3.907751] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.907752] usb 1-XXX.XXX.XXX.XXX: Product: USB Receiver [ 3.907754] usb 1-XXX.XXX.XXX.XXX: Manufacturer: Logitech [ 3.909980] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:046D:C52B.0001/input/input5 [ 3.962152] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input0 [ 3.964641] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0002/input/input6 [ 3.965040] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0002/input/input7 [ 4.016957] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C52B.0002/input/input8 [ 4.017308] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input1 [ 4.019300] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input2 [ 4.140736] usb 1-XXX.XXX.XXX.XXX: new low-speed USB device number 9 using ehci-pci [ 4.282245] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.07 [ 4.282249] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.282251] usb 1-XXX.XXX.XXX.XXX: Product: Dell USB Keyboard [ 4.282252] usb 1-XXX.XXX.XXX.XXX: Manufacturer: Dell [ 4.286235] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:413C:2003.0004/input/input10 [ 4.305810] [drm] ib test on ring 5 succeeded [ 4.306380] [drm] Radeon Display Connectors [ 4.306381] [drm] Connector 0: [ 4.306381] [drm] DP-1 [ 4.306381] [drm] HPD2 [ 4.306382] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 4.306383] [drm] Encoders: [ 4.306383] [drm] DFP1: INTERNAL_UNIPHY1 [ 4.306384] [drm] Connector 1: [ 4.306384] [drm] DVI-I-1 [ 4.306385] [drm] HPD4 [ 4.306386] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 4.306386] [drm] Encoders: [ 4.306387] [drm] DFP2: INTERNAL_UNIPHY [ 4.306387] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.324330] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 4.324787] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 4.326669] sd 7:0:0:0: [sdd] 15536128 512-byte logical blocks: (7.95 GB/7.41 GiB) [ 4.328043] sd 7:0:0:0: [sdd] Write Protect is off [ 4.328046] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 4.329417] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.336045] sdd: sdd1 [ 4.337846] hid-generic 0003:413C:2003.0004: input,hidraw3: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input0 [ 4.340022] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 4.367308] [drm] fb mappable at 0xE034D000 [ 4.367308] [drm] vram apper at 0xE0000000 [ 4.367309] [drm] size 5324800 [ 4.367309] [drm] fb depth is 24 [ 4.367310] [drm] pitch is 5888 [ 4.367372] fbcon: radeondrmfb (fb0) is primary device [ 4.392617] Console: switching to colour frame buffer device 180x56 [ 4.394979] radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device [ 4.406830] [drm] Initialized radeon 2.50.0 20080528 for 0000:03:00.0 on minor 0 [ 4.692277] sdc: sdc1 [ 4.695968] sd 8:0:0:0: [sdc] Attached SCSI disk [ 6.768363] sdb: sdb1 sdb2 sdb3 sdb4 [ 6.772970] sd 6:0:0:0: [sdb] Attached SCSI disk [ 6.884749] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input2 [ 6.991963] input: Logitech Unifying Device. Wireless PID:1017 Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.2/0003:046D:C52B.0003/0003:046D:1017.0005/input/input11 [ 6.992141] hid-generic 0003:046D:1017.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input2:1 [ 7.031782] input: Logitech Anywhere MX as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.2/0003:046D:C52B.0003/0003:046D:1017.0005/input/input15 [ 7.032024] logitech-hidpp-device 0003:046D:1017.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-0000:00:1a.7-XXX.XXX.XXX.XXX/input2:1 [ 7.057729] random: crng init done [ 7.057737] random: 7 urandom warning(s) missed due to ratelimiting [ 27.903786] scsi host9: ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 [ 27.960262] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 0, sas_addr 0x1221000000000000 [ 27.964885] scsi 9:0:0:0: Direct-Access ATA ST3250318AS HP40 PQ: 0 ANSI: 5 [ 27.995944] scsi 9:0:0:0: Attached scsi generic sg5 type 0 [ 27.997740] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000 [ 28.034248] scsi 9:0:1:0: Direct-Access ATA ST250DM000-1BD14 KC45 PQ: 0 ANSI: 5 [ 28.064139] scsi 9:0:1:0: Attached scsi generic sg6 type 0 [ 28.065946] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000 [ 28.074124] scsi 9:0:2:0: Direct-Access ATA ST3250318AS CC45 PQ: 0 ANSI: 5 [ 28.079324] sd 9:0:2:0: Attached scsi generic sg7 type 0 [ 28.080834] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x1221000002000000 [ 28.086136] sd 9:0:2:0: [sde] 488281250 512-byte logical blocks: (250 GB/233 GiB) [ 28.090858] scsi 9:0:3:0: Direct-Access ATA Hitachi HUS72403 A5F0 PQ: 0 ANSI: 5 [ 28.098756] sd 9:0:3:0: Attached scsi generic sg8 type 0 [ 28.100698] mptsas: ioc0: attaching raid volume, channel 1, id 0 [ 28.106426] sd 9:0:3:0: [sdf] 4294967294 512-byte logical blocks: (2.20 TB/2.00 TiB) [ 28.109514] sd 9:0:3:0: [sdf] Write Protect is off [ 28.109517] sd 9:0:3:0: [sdf] Mode Sense: 73 00 00 08 [ 28.113176] sd 9:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.127446] sd 9:0:2:0: [sde] Write Protect is off [ 28.127449] sd 9:0:2:0: [sde] Mode Sense: 73 00 00 08 [ 28.139381] sd 9:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.184542] sdf: sdf1 [ 28.198643] sde: sde1 [ 28.217169] sd 9:0:3:0: [sdf] Attached SCSI disk [ 28.255994] sd 9:0:2:0: [sde] Attached SCSI disk [ 28.802982] scsi 9:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5 [ 28.812164] sd 9:1:0:0: Attached scsi generic sg9 type 0 [ 28.813248] sd 9:1:0:0: [sdg] 487325696 512-byte logical blocks: (250 GB/232 GiB) [ 28.813559] sd 9:1:0:0: [sdg] Write Protect is off [ 28.813562] sd 9:1:0:0: [sdg] Mode Sense: 03 00 00 08 [ 28.813910] sd 9:1:0:0: [sdg] No Caching mode page found [ 28.813912] sd 9:1:0:0: [sdg] Assuming drive cache: write through [ 28.825370] sdg: sdg1 sdg2 [ 28.827853] sd 9:1:0:0: [sdg] Attached SCSI disk [ 29.744009] PM: Image not found (code -22) [ 29.809852] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 30.230979] systemd-journald[418]: Received SIGTERM from PID 1 (systemd). [ 30.260030] printk: systemd: 23 output lines suppressed due to ratelimiting [ 30.826692] SELinux: policy capability network_peer_controls=1 [ 30.826693] SELinux: policy capability open_perms=1 [ 30.826693] SELinux: policy capability extended_socket_class=1 [ 30.826694] SELinux: policy capability always_check_network=0 [ 30.826694] SELinux: policy capability cgroup_seclabel=1 [ 30.826695] SELinux: policy capability nnp_nosuid_transition=1 [ 30.857207] systemd[1]: Successfully loaded SELinux policy in 425.651ms. [ 30.878551] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time. [ 30.931412] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 44.268ms. [ 30.940153] systemd[1]: systemd v241-12.git323cdf4.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 30.952856] systemd[1]: Detected architecture x86-64. [ 30.953727] systemd[1]: Set hostname to ... [ 31.205906] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid \xe2\x86\x92 /run/gssproxy.pid; please update the unit file accordingly. [ 31.290579] systemd[1]: /usr/lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid \xe2\x86\x92 /run/sssd.pid; please update the unit file accordingly. [ 31.291840] systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid \xe2\x86\x92 /run/mdadm/mdadm.pid; please update the unit file accordingly. [ 31.293728] systemd[1]: /usr/lib/systemd/system/iscsid.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsid.pid \xe2\x86\x92 /run/iscsid.pid; please update the unit file accordingly. [ 31.294168] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsiuio.pid \xe2\x86\x92 /run/iscsiuio.pid; please update the unit file accordingly. [ 31.456790] systemd[1]: initrd-switch-root.service: Succeeded. [ 31.457150] systemd[1]: Stopped Switch Root. [ 31.484640] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 31.537720] Adding 24784892k swap on /dev/mapper/XXXXXXXXXXXX Priority:-2 extents:1 across:24784892k SSFS [ 31.572705] fuse: init (API version 7.31) [ 31.759520] systemd-journald[846]: Received request to flush runtime journal from PID 1 [ 32.063470] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (INTERRUPT) [ 32.063486] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED) [ 32.063598] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT) [ 32.063607] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 32.063615] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 32.117303] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20190703/utaddress-204) [ 32.117310] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20190703/utaddress-204) [ 32.117313] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20190703/utaddress-204) [ 32.117316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.117353] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 32.118281] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 32.229805] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 32.234842] dell-smbios HASH_3CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 32.291611] iTCO_vendor_support: vendor-support=0 [ 32.292568] gpio_ich gpio_ich.1.auto: GPIO from 451 to 511 [ 32.318593] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_994-A997-11DA-B012-B622A1EF5492/input/input16 [ 32.319658] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 32.319712] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 32.319986] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 32.432596] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 32.450440] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17 [ 32.500405] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 32.844008] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 32.844010] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 32.844011] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 32.844012] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 32.844013] snd_hda_codec_analog hdaudioC0D0: inputs: [ 32.844014] snd_hda_codec_analog hdaudioC0D0: Mic=0x14 [ 32.844015] snd_hda_codec_analog hdaudioC0D0: Line=0x15 [ 33.017374] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 33.017525] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 33.017702] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 33.017831] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 34.120155] alua: device handler registered [ 34.127780] emc: device handler registered [ 34.134189] rdac: device handler registered [ 35.207382] loop: module loaded [ 35.240738] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 35.446736] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 35.447359] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 35.791065] RPC: Registered named UNIX socket transport module. [ 35.791066] RPC: Registered udp transport module. [ 35.791067] RPC: Registered tcp transport module. [ 35.791067] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.116318] vboxdrv: loading out-of-tree module taints kernel. [ 36.116542] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 36.125198] vboxdrv: Found 24 processor cores [ 36.142386] vboxdrv: TSC mode is Invariant, tentative frequency 3325021908 Hz [ 36.142387] vboxdrv: Successfully loaded version 6.0.14 (interface 0x00290008) [ 36.377005] VBoxNetFlt: Successfully started. [ 36.389777] VBoxNetAdp: Successfully started. [ 36.405776] VBoxPciLinuxInit [ 36.405780] vboxpci: IOMMU not found (not registered) [ 37.732654] overlayfs: missing 'lowerdir' [ 38.164117] tun: Universal TUN/TAP device driver, 1.6 [ 38.165963] virbr0: port 1(virbr0-nic) entered blocking state [ 38.165964] virbr0: port 1(virbr0-nic) entered disabled state [ 38.166039] device virbr0-nic entered promiscuous mode [ 38.262818] virbr0: port 1(virbr0-nic) entered blocking state [ 38.262821] virbr0: port 1(virbr0-nic) entered listening state [ 38.299364] virbr0: port 1(virbr0-nic) entered disabled state [ 44.326446] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 44.343268] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended [ 44.374754] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 52.267604] logitech-hidpp-device 0003:046D:1017.0005: HID++ 1.0 device connected. [ 52.379602] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 57.529698] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 57.529704] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 57.529719] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 63.562774] abrt-applet[2628]: segfault at 0 ip 00007fcda6b09fec sp 00007ffd748eaee0 error 4 in libreport-gtk.so.0.0.1[7fcda6b02000+9000] [ 63.562780] Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 54 ba ff ff ff ff 48 8d 35 1b 1c 00 00 55 48 83 ec 08 e8 d4 9e ff ff <48> 8b 38 48 89 c5 e8 e9 94 ff ff 48 89 ef 49 89 c4 e8 8e a1 ff ff [ 366.726125] EXT4-fs (sdb2): error count since last fsck: 271 [ 366.726135] EXT4-fs (sdb2): initial error at time 1568311160: ext4_iget:4508: inode 264224 [ 366.726139] EXT4-fs (sdb2): last error at time 1571697230: ext4_lookup:1700: inode 930887 [ 384.947704] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 611.897769] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 947.555868] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 947.635871] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 1088.571914] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 1088.683910] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 2085.179897] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 3081.278510] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 3099.812518] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 3166.298536] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 3245.142565] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 3416.356613] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 5733.907311] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 6157.373722] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=1 [ 6157.373725] mptbase: ioc0: PhysDisk is now online [ 6157.394023] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 [ 6157.394026] mptbase: ioc0: volume is now optimal, enabled, resync in progress [ 6157.401179] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 [ 6157.401182] mptbase: ioc0: volume is now optimal, enabled [ 6736.137612] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 8617.870178] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 8645.926188] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 8867.334360] perf: interrupt took too long (3149 > 3138), lowering kernel.perf_event_max_sample_rate to 63000 [ 8965.384285] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [ 9627.276481] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [12079.145216] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [12272.855286] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [12454.279340] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [12454.359332] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [12516.551355] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13067.313525] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13107.477540] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13128.667509] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13383.647617] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13401.475618] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13408.417617] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13408.703621] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13516.167648] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [13567.975251] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [15305.204187] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [15307.152191] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [15309.362189] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16136.984427] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16155.514448] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16163.706450] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16174.912453] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16257.554478] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16463.114539] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16463.384562] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [16499.678271] perf: interrupt took too long (3939 > 3936), lowering kernel.perf_event_max_sample_rate to 50000 [16718.876613] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [17032.652704] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [17035.618722] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [17928.306946] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18025.631009] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18040.093012] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18040.803011] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18070.099020] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18070.433018] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18089.529055] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18098.223038] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18098.443042] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18099.223029] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18100.507025] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18100.795030] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18129.663035] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18130.021034] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18130.149012] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [18700.705755] usb 1-3: USB disconnect, device number 5 [18947.954977] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null) [18999.214092] usb 1-4: USB disconnect, device number 7 [18999.221181] sd 8:0:0:0: [sdc] Synchronizing SCSI cache [18999.348430] sd 8:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [19003.103457] usb 1-4: new high-speed USB device number 10 using ehci-pci [19003.282543] usb 1-4: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 5.01 [19003.282546] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19003.282548] usb 1-4: Product: USB3.0 Device [19003.282550] usb 1-4: Manufacturer: USB3.0 Device [19003.282552] usb 1-4: SerialNumber: ... [19003.284148] scsi host7: uas [19003.754375] scsi 7:0:0:0: Direct-Access SAMSUNG SSD UM410 Series 0501 PQ: 0 ANSI: 6 [19003.756215] sd 7:0:0:0: Attached scsi generic sg3 type 0 [19003.757667] sd 7:0:0:0: [sdc] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [19003.757668] sd 7:0:0:0: [sdc] 4096-byte physical blocks [19003.758057] sd 7:0:0:0: [sdc] Write Protect is off [19003.758059] sd 7:0:0:0: [sdc] Mode Sense: 5f 00 00 08 [19003.758644] sd 7:0:0:0: [sdc] Disabling FUA [19003.758646] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [19003.758896] sd 7:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [19003.762190] sdc: sdc1 [19003.765929] sd 7:0:0:0: [sdc] Attached SCSI disk [19030.301307] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [19030.957310] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [19091.272625] usb 1-4: USB disconnect, device number 10 [19091.281168] sd 7:0:0:0: [sdc] Synchronizing SCSI cache [19091.409046] sd 7:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [19496.092925] usb 1-4: new high-speed USB device number 11 using ehci-pci [19496.229318] usb 1-4: New USB device found, idVendor=fafa, idProduct=fafa, bcdDevice= 1.02 [19496.229321] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19496.229323] usb 1-4: SerialNumber: ... [19496.230130] usb-storage 1-4:1.0: USB Mass Storage device detected [19496.230559] scsi host7: usb-storage 1-4:1.0 [19497.294334] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [19497.295118] sd 7:0:0:0: Attached scsi generic sg3 type 0 [19497.296732] sd 7:0:0:0: [sdc] 15536128 512-byte logical blocks: (7.95 GB/7.41 GiB) [19497.297859] sd 7:0:0:0: [sdc] Write Protect is off [19497.297862] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [19497.298925] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [19497.304911] sdc: sdc1 [19497.310623] sd 7:0:0:0: [sdc] Attached SCSI removable disk [19497.590611] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [20861.365862] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [20861.771864] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [20890.339866] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [22654.478157] usb 1-1.4.3: new high-speed USB device number 12 using ehci-pci [22654.763143] usb 1-1.4.3: New USB device found, idVendor=046d, idProduct=082c, bcdDevice= 0.11 [22654.763147] usb 1-1.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [22654.763149] usb 1-1.4.3: Product: HD Webcam C615 [22654.763151] usb 1-1.4.3: SerialNumber: ... [22654.804298] mc: Linux media interface: v0.10 [22654.830323] videodev: Linux video capture interface: v2.00 [22655.017172] usb 1-1.4.3: current rate 850259 is different from the runtime rate 16000 [22655.020510] usb 1-1.4.3: current rate 5210760 is different from the runtime rate 24000 [22655.024013] usb 1-1.4.3: current rate 12284159 is different from the runtime rate 32000 [22655.027762] usb 1-1.4.3: current rate 10194535 is different from the runtime rate 48000 [22655.056386] usbcore: registered new interface driver snd-usb-audio [22655.056496] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c) [22655.093729] uvcvideo 1-1.4.3:1.2: Entity type for entity Extension 5 was not initialized! [22655.093732] uvcvideo 1-1.4.3:1.2: Entity type for entity Processing 2 was not initialized! [22655.093733] uvcvideo 1-1.4.3:1.2: Entity type for entity Camera 1 was not initialized! [22655.093734] uvcvideo 1-1.4.3:1.2: Entity type for entity Extension 6 was not initialized! [22655.093736] uvcvideo 1-1.4.3:1.2: Entity type for entity Extension 7 was not initialized! [22655.093737] uvcvideo 1-1.4.3:1.2: Entity type for entity Extension 8 was not initialized! [22655.093931] input: HD Webcam C615 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/input/input22 [22655.094194] usbcore: registered new interface driver uvcvideo [22655.094195] USB Video Class driver (1.1.1) [22655.127918] usb 1-1.4.3: current rate 16721465 is different from the runtime rate 48000 [22655.144543] usb 1-1.4.3: current rate 204129 is different from the runtime rate 48000 [22735.811739] usb 1-1.4.3: reset high-speed USB device number 12 using ehci-pci [25607.981291] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [25832.761314] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [26375.340813] usb 1-4: USB disconnect, device number 11 [28939.714291] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [30017.169792] usb 1-3: new high-speed USB device number 13 using ehci-pci [30017.306229] usb 1-3: New USB device found, idVendor=fafa, idProduct=fafa, bcdDevice= 1.02 [30017.306233] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [30017.306235] usb 1-3: SerialNumber: ... [30017.307096] usb-storage 1-3:1.0: USB Mass Storage device detected [30017.307478] scsi host7: usb-storage 1-3:1.0 [30018.329221] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [30018.329750] sd 7:0:0:0: Attached scsi generic sg3 type 0 [30018.332154] sd 7:0:0:0: [sdc] 15536128 512-byte logical blocks: (7.95 GB/7.41 GiB) [30018.333246] sd 7:0:0:0: [sdc] Write Protect is off [30018.333249] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [30018.334392] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [30018.340153] sdc: sdc1 [30018.345793] sd 7:0:0:0: [sdc] Attached SCSI removable disk [30018.613211] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [30027.569865] usb 1-4: new high-speed USB device number 14 using ehci-pci [30027.748985] usb 1-4: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 5.01 [30027.748988] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [30027.748991] usb 1-4: Product: USB3.0 Device [30027.748993] usb 1-4: Manufacturer: USB3.0 Device [30027.748994] usb 1-4: SerialNumber: ... [30027.750734] scsi host8: uas [30028.221957] scsi 8:0:0:0: Direct-Access SAMSUNG SSD UM410 Series 0501 PQ: 0 ANSI: 6 [30028.223902] sd 8:0:0:0: Attached scsi generic sg4 type 0 [30028.225553] sd 8:0:0:0: [sdd] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [30028.225556] sd 8:0:0:0: [sdd] 4096-byte physical blocks [30028.225950] sd 8:0:0:0: [sdd] Write Protect is off [30028.225953] sd 8:0:0:0: [sdd] Mode Sense: 5f 00 00 08 [30028.226623] sd 8:0:0:0: [sdd] Disabling FUA [30028.226626] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [30028.226956] sd 8:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [30028.231073] sdd: sdd1 [30028.235488] sd 8:0:0:0: [sdd] Attached SCSI disk [30417.688733] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [32295.459295] logitech-hidpp-device 0003:046D:1017.0005: multiplier = 8 [35576.396964] loki-electron-w[51758]: segfault at 0 ip 00007ff0440f86aa sp 00007ffdbff125d8 error 4 in libc-2.29.so[7ff044080000+14d000] [35576.396973] Code: f3 0f 1e fa 66 0f ef c0 66 0f ef c9 66 0f ef d2 66 0f ef db 48 89 f8 48 89 f9 48 81 e1 ff 0f 00 00 48 81 f9 cf 0f 00 00 77 66 <f3> 0f 6f 20 66 0f 74 e0 66 0f d7 d4 85 d2 74 04 0f bc c2 c3 48 83