Probe #2616a209d9 of HP EliteBook 840 G6

Log: dmesg

[ 0.000000] microcode: updated early: 0xca -> 0xf8, date = 2023-02-26 [ 0.000000] Linux version 6.5.0-35-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #35~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue May 7 09:00:52 UTC 2 (Ubuntu 6.5.0-35.35~22.04.1-generic 6.5.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-35-generic root=UUID=HASH_050-0BDA-9D6B-362C-DB383CD05E9E ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f39fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096f3a000-0x0000000097afffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000097b00000-0x0000000097b8efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000097b8f000-0x0000000097c0efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000097c0f000-0x0000000097c0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097c10000-0x000000009e7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025d7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.6 by HP [ 0.000000] efi: ACPI=0x97c0e000 ACPI 2.0=0x97c0e014 ESRT=0x96fe6b98 TPMFinalLog=0x97b37000 SMBIOS=0x96fe5000 MEMATTR=0x93615018 MOKvar=0x96fd8000 RNG=0x97b96018 TPMEventLog=0x8e695018 [ 0.000000] random: crng init done [ 0.000000] efi: Not removing mem61: MMIO range=[0xfe010000-0xfe010fff] (4KB) from e820 map [ 0.000000] efi: Remove mem62: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.1 present. [ 0.000000] DMI: HP HP EliteBook 840 G6/8549, BIOS R70 Ver. 01.04.03 02/10/2020 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000015] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000028] last_pfn = 0x25d800 max_arch_pfn = 0x400000000 [ 0.000036] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs [ 0.000040] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000933] last_pfn = 0x97c10 max_arch_pfn = 0x400000000 [ 0.015864] esrt: Reserving ESRT space from 0x0000000096fe6b98 to 0x0000000096fe6bf8. [ 0.015884] Using GB pages for direct mapping [ 0.016600] secureboot: Secure boot disabled [ 0.016601] RAMDISK: [mem 0x85cbc000-0x89fbdfff] [ 0.016614] ACPI: Early table checksum verification disabled [ 0.016618] ACPI: RSDP 0x0000000097C0E014 000024 (v02 HPQOEM) [ 0.016627] ACPI: XSDT 0x0000000097BBA188 000154 (v01 HPQOEM SLIC-BPC 00000000 INTL 20160422) [ 0.016638] ACPI: FACP 0x0000000097BF2000 000114 (v06 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.016648] ACPI: DSDT 0x0000000097BC7000 027946 (v02 HPQOEM 8549 00000000 INTL 20160527) [ 0.016655] ACPI: FACS 0x0000000097B31000 000040 [ 0.016661] ACPI: SSDT 0x0000000097C0C000 0002D7 (v01 HP NVTEC 00000001 INTL 20160527) [ 0.016668] ACPI: SSDT 0x0000000097C0B000 00012A (v02 HP ShmTable 00000001 INTL 20160527) [ 0.016674] ACPI: SSDT 0x0000000097C09000 001B5F (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.016681] ACPI: SSDT 0x0000000097C08000 0009CF (v02 CtdpB CtdpB 00001000 INTL 20160527) [ 0.016687] ACPI: SSDT 0x0000000097BFB000 00CE82 (v02 AcpiRe PLT_RTD3 00001000 INTL 20160527) [ 0.016693] ACPI: RTMA 0x0000000097BF9000 00009E (v01 HP _HBMART_ 00001000 HP 00000001) [ 0.016700] ACPI: SSDT 0x0000000097BF7000 001575 (v02 HP UcsiAcpi 00000001 INTL 20160527) [ 0.016706] ACPI: SSDT 0x0000000097BF6000 0000FB (v02 HP UcsiCntr 00000001 INTL 20160527) [ 0.016712] ACPI: MSDM 0x0000000097BF5000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.016718] ACPI: SLIC 0x0000000097BF4000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.016725] ACPI: WSMT 0x0000000097BF3000 000028 (v01 HPQOEM 8549 00000001 HP 00000001) [ 0.016731] ACPI: HPET 0x0000000097BF1000 000038 (v01 HPQOEM 8549 00000001 HP 00000001) [ 0.016737] ACPI: APIC 0x0000000097BF0000 00012C (v03 HPQOEM 8549 00000001 HP 00000001) [ 0.016743] ACPI: MCFG 0x0000000097BEF000 00003C (v01 HPQOEM 8549 00000001 HP 00000001) [ 0.016749] ACPI: SSDT 0x0000000097BC6000 000746 (v02 HPQOEM PtidDevc 00001000 INTL 20160527) [ 0.016755] ACPI: SSDT 0x0000000097BC5000 00089D (v02 HPQOEM HP_XHC_P 00000000 INTL 20160527) [ 0.016761] ACPI: NHLT 0x0000000097BC3000 0017F1 (v00 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016768] ACPI: SSDT 0x0000000097BBF000 003D00 (v02 DptfTa DptfTabl 00001000 INTL 20160527) [ 0.016774] ACPI: SSDT 0x0000000097BBB000 003125 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.016780] ACPI: LPIT 0x0000000097C0D000 000094 (v01 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016786] ACPI: WSMT 0x0000000097BB9000 000028 (v01 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016793] ACPI: SSDT 0x0000000097BB8000 0003CE (v02 INTEL Tpm2Tabl 00001000 INTL 20160527) [ 0.016799] ACPI: TPM2 0x0000000097BB7000 000034 (v04 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016805] ACPI: UEFI 0x0000000097B2B000 000042 (v01 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016811] ACPI: OEML 0x0000000097BB6000 000028 (v03 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016817] ACPI: DMAR 0x0000000097BB5000 0000C8 (v01 INTEL WHL 00000002 INTL 01000013) [ 0.016824] ACPI: SSDT 0x0000000097BA1000 013C48 (v02 HP HPTBT 00001000 INTL 20160527) [ 0.016830] ACPI: SSDT 0x0000000097BA0000 000821 (v01 HP HPINWWAN 00001000 INTL 20160527) [ 0.016836] ACPI: SSDT 0x0000000097B9F000 00013B (v01 HP HPNBCONV 00001000 INTL 20160527) [ 0.016843] ACPI: SSDT 0x0000000097B9E000 000328 (v01 HP INTTPL 00001000 INTL 20160527) [ 0.016849] ACPI: SSDT 0x0000000097B9C000 001377 (v01 HP HPINNBWL 00001000 INTL 20160527) [ 0.016855] ACPI: SSDT 0x0000000097B9B000 000032 (v01 HP HPCONDEV 00001000 INTL 20160527) [ 0.016861] ACPI: SSDT 0x0000000097B9A000 000115 (v01 HP HPSANIMD 00001000 INTL 20160527) [ 0.016867] ACPI: SSDT 0x0000000097B99000 000069 (v01 HP HPCAHWID 00001000 INTL 20160527) [ 0.016873] ACPI: FPDT 0x0000000097B98000 000044 (v01 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016880] ACPI: BGRT 0x0000000097B97000 000038 (v01 INTEL CFL-ULT 20170001 INTL 20160422) [ 0.016886] ACPI: SSDT 0x0000000097BFA000 0002F9 (v02 HP PwrCtlEv 00000001 INTL 20160527) [ 0.016891] ACPI: Reserving FACP table memory at [mem 0x97bf2000-0x97bf2113] [ 0.016894] ACPI: Reserving DSDT table memory at [mem 0x97bc7000-0x97bee945] [ 0.016896] ACPI: Reserving FACS table memory at [mem 0x97b31000-0x97b3103f] [ 0.016898] ACPI: Reserving SSDT table memory at [mem 0x97c0c000-0x97c0c2d6] [ 0.016900] ACPI: Reserving SSDT table memory at [mem 0x97c0b000-0x97c0b129] [ 0.016902] ACPI: Reserving SSDT table memory at [mem 0x97c09000-0x97c0ab5e] [ 0.016904] ACPI: Reserving SSDT table memory at [mem 0x97c08000-0x97c089ce] [ 0.016905] ACPI: Reserving SSDT table memory at [mem 0x97bfb000-0x97c07e81] [ 0.016907] ACPI: Reserving RTMA table memory at [mem 0x97bf9000-0x97bf909d] [ 0.016909] ACPI: Reserving SSDT table memory at [mem 0x97bf7000-0x97bf8574] [ 0.016911] ACPI: Reserving SSDT table memory at [mem 0x97bf6000-0x97bf60fa] [ 0.016912] ACPI: Reserving MSDM table memory at [mem 0x97bf5000-0x97bf5054] [ 0.016914] ACPI: Reserving SLIC table memory at [mem 0x97bf4000-0x97bf4175] [ 0.016916] ACPI: Reserving WSMT table memory at [mem 0x97bf3000-0x97bf3027] [ 0.016918] ACPI: Reserving HPET table memory at [mem 0x97bf1000-0x97bf1037] [ 0.016920] ACPI: Reserving APIC table memory at [mem 0x97bf0000-0x97bf012b] [ 0.016921] ACPI: Reserving MCFG table memory at [mem 0x97bef000-0x97bef03b] [ 0.016923] ACPI: Reserving SSDT table memory at [mem 0x97bc6000-0x97bc6745] [ 0.016925] ACPI: Reserving SSDT table memory at [mem 0x97bc5000-0x97bc589c] [ 0.016927] ACPI: Reserving NHLT table memory at [mem 0x97bc3000-0x97bc47f0] [ 0.016929] ACPI: Reserving SSDT table memory at [mem 0x97bbf000-0x97bc2cff] [ 0.016930] ACPI: Reserving SSDT table memory at [mem 0x97bbb000-0x97bbe124] [ 0.016932] ACPI: Reserving LPIT table memory at [mem 0x97c0d000-0x97c0d093] [ 0.016934] ACPI: Reserving WSMT table memory at [mem 0x97bb9000-0x97bb9027] [ 0.016936] ACPI: Reserving SSDT table memory at [mem 0x97bb8000-0x97bb83cd] [ 0.016938] ACPI: Reserving TPM2 table memory at [mem 0x97bb7000-0x97bb7033] [ 0.016939] ACPI: Reserving UEFI table memory at [mem 0x97b2b000-0x97b2b041] [ 0.016941] ACPI: Reserving OEML table memory at [mem 0x97bb6000-0x97bb6027] [ 0.016943] ACPI: Reserving DMAR table memory at [mem 0x97bb5000-0x97bb50c7] [ 0.016945] ACPI: Reserving SSDT table memory at [mem 0x97ba1000-0x97bb4c47] [ 0.016947] ACPI: Reserving SSDT table memory at [mem 0x97ba0000-0x97ba0820] [ 0.016949] ACPI: Reserving SSDT table memory at [mem 0x97b9f000-0x97b9f13a] [ 0.016950] ACPI: Reserving SSDT table memory at [mem 0x97b9e000-0x97b9e327] [ 0.016952] ACPI: Reserving SSDT table memory at [mem 0x97b9c000-0x97b9d376] [ 0.016954] ACPI: Reserving SSDT table memory at [mem 0x97b9b000-0x97b9b031] [ 0.016956] ACPI: Reserving SSDT table memory at [mem 0x97b9a000-0x97b9a114] [ 0.016958] ACPI: Reserving SSDT table memory at [mem 0x97b99000-0x97b99068] [ 0.016960] ACPI: Reserving FPDT table memory at [mem 0x97b98000-0x97b98043] [ 0.016961] ACPI: Reserving BGRT table memory at [mem 0x97b97000-0x97b97037] [ 0.016963] ACPI: Reserving SSDT table memory at [mem 0x97bfa000-0x97bfa2f8] [ 0.017485] No NUMA configuration found [ 0.017487] Faking a node at [mem 0x0000000000000000-0x000000025d7fffff] [ 0.017509] NODE_DATA(0) allocated [mem 0x25d7d3000-0x25d7fdfff] [ 0.017910] Zone ranges: [ 0.017912] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017916] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017919] Normal [mem 0x0000000100000000-0x000000025d7fffff] [ 0.017922] Device empty [ 0.017924] Movable zone start for each node [ 0.017928] Early memory node ranges [ 0.017929] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.017932] node 0: [mem 0x0000000000100000-0x0000000096f39fff] [ 0.017935] node 0: [mem 0x0000000097c0f000-0x0000000097c0ffff] [ 0.017937] node 0: [mem 0x0000000100000000-0x000000025d7fffff] [ 0.017940] Initmem setup node 0 [mem 0x0000000000001000-0x000000025d7fffff] [ 0.017948] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017984] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027004] On node 0, zone DMA32: 3285 pages in unavailable ranges [ 0.048651] On node 0, zone Normal: 1008 pages in unavailable ranges [ 0.048829] On node 0, zone Normal: 10240 pages in unavailable ranges [ 0.048858] Reserving Intel graphics memory at [mem 0x9c800000-0x9e7fffff] [ 0.049832] ACPI: PM-Timer IO Port: 0x1808 [ 0.049855] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.049860] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.049862] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.049863] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.049865] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.049866] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.049868] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.049869] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.049871] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.049873] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.049874] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.049876] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.049877] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.049879] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.049880] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.049882] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.049938] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.049944] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.049948] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.049956] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.049958] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.049970] e820: update [mem 0x930f0000-0x93138fff] usable ==> reserved [ 0.049986] TSC deadline timer available [ 0.049988] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.050010] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.050014] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.050017] PM: hibernation: Registered nosave memory: [mem 0x930f0000-0x93138fff] [ 0.050020] PM: hibernation: Registered nosave memory: [mem 0x96f3a000-0x97afffff] [ 0.050022] PM: hibernation: Registered nosave memory: [mem 0x97b00000-0x97b8efff] [ 0.050023] PM: hibernation: Registered nosave memory: [mem 0x97b8f000-0x97c0efff] [ 0.050026] PM: hibernation: Registered nosave memory: [mem 0x97c10000-0x9e7fffff] [ 0.050028] PM: hibernation: Registered nosave memory: [mem 0x9e800000-0xfe00ffff] [ 0.050029] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.050031] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.050034] [mem 0x9e800000-0xfe00ffff] available for PCI devices [ 0.050036] Booting paravirtualized kernel on bare hardware [ 0.050039] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.050051] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.050961] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.050972] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.050977] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.051016] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-35-generic root=UUID=HASH_050-0BDA-9D6B-362C-DB383CD05E9E ro quiet splash vt.handoff=7 [ 0.051170] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.5.0-35-generic", will be passed to user space. [ 0.053199] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.054198] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.054415] Fallback order for Node 0: 0 [ 0.054421] Built 1 zonelists, mobility grouping on. Total pages: 2017566 [ 0.054423] Policy zone: Normal [ 0.054432] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.054443] software IO TLB: area num 8. [ 0.127325] Memory: 7725348K/8199012K available (20480K kernel code, 4266K rwdata, 13192K rodata, 4816K init, 17372K bss, 473404K reserved, 0K cma-reserved) [ 0.127831] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.127884] ftrace: allocating 55276 entries in 216 pages [ 0.146047] ftrace: allocated 216 pages with 4 groups [ 0.147441] Dynamic Preempt: voluntary [ 0.147504] rcu: Preemptible hierarchical RCU implementation. [ 0.147506] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.147508] Trampoline variant of Tasks RCU enabled. [ 0.147509] Rude variant of Tasks RCU enabled. [ 0.147510] Tracing variant of Tasks RCU enabled. [ 0.147512] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.147513] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.153531] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.153891] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.154210] Console: colour dummy device 80x25 [ 0.154215] printk: console [tty0] enabled [ 0.154309] ACPI: Core revision 20230331 [ 0.155086] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.155089] APIC: Switch to symmetric I/O mode setup [ 0.155093] DMAR: Host address width 39 [ 0.155096] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.155109] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.155115] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.155121] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.155125] DMAR: RMRR base: 0x0000009798f000 end: 0x000000979aefff [ 0.155129] DMAR: RMRR base: 0x0000009c000000 end: 0x0000009e7fffff [ 0.155131] DMAR: RMRR base: 0x000000979e0000 end: 0x00000097a5ffff [ 0.155135] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.155138] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.155140] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.158314] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.158317] x2apic enabled [ 0.158349] Switched APIC routing to cluster x2apic. [ 0.165385] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.165398] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) [ 0.165442] x86/cpu: SGX disabled by BIOS. [ 0.165457] CPU0: Thermal monitoring enabled (TM1) [ 0.165544] process: using mwait in idle threads [ 0.165560] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.165562] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.165568] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.165573] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit [ 0.165575] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.165576] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.165578] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.165580] RETBleed: Mitigation: Enhanced IBRS [ 0.165583] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.165586] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.165596] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.165599] SRBDS: Mitigation: Microcode [ 0.165603] GDS: Mitigation: Microcode [ 0.165612] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.165615] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.165617] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.165619] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.165621] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.165623] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.165626] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.165629] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.165631] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.169392] Freeing SMP alternatives memory: 44K [ 0.169392] pid_max: default: 32768 minimum: 301 [ 0.169392] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.169392] landlock: Up and running. [ 0.169392] Yama: becoming mindful. [ 0.169392] AppArmor: AppArmor initialized [ 0.169392] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.169392] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.169392] process: Switch to broadcast mode on CPU0 [ 0.169392] smpboot: CPU0: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xc) [ 0.169392] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.169392] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.169392] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.169392] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.169392] ... version: 4 [ 0.169392] ... bit width: 48 [ 0.169392] ... generic registers: 4 [ 0.169392] ... value mask: 0000ffffffffffff [ 0.169392] ... max period: 00007fffffffffff [ 0.169392] ... fixed-purpose events: 3 [ 0.169392] ... event mask: 000000070000000f [ 0.169392] signal: max sigframe size: 2032 [ 0.169392] Estimated ratio of average max frequency by base frequency (times 1024): 2104 [ 0.169392] rcu: Hierarchical SRCU implementation. [ 0.169392] rcu: Max phase no-delay instances is 1000. [ 0.169392] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.169392] smp: Bringing up secondary CPUs ... [ 0.169392] smpboot: x86: Booting SMP configuration: [ 0.169392] .... node #0, CPUs: #1 #2 #3 [ 0.015261] process: Switch to broadcast mode on CPU1 [ 0.015261] process: Switch to broadcast mode on CPU2 [ 0.015261] process: Switch to broadcast mode on CPU3 [ 0.173578] #4 #5 #6 #7 [ 0.015261] process: Switch to broadcast mode on CPU4 [ 0.174889] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.015261] process: Switch to broadcast mode on CPU5 [ 0.015261] process: Switch to broadcast mode on CPU6 [ 0.015261] process: Switch to broadcast mode on CPU7 [ 0.174889] smp: Brought up 1 node, 8 CPUs [ 0.174889] smpboot: Max logical packages: 1 [ 0.174889] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.177886] devtmpfs: initialized [ 0.177886] x86/mm: Memory block size: 128MB [ 0.178869] ACPI: PM: Registering ACPI NVS region [mem 0x97b00000-0x97b8efff] (585728 bytes) [ 0.178869] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.178869] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.178869] pinctrl core: initialized pinctrl subsystem [ 0.178869] PM: RTC time: 08:41:10, date: 2024-05-24 [ 0.178869] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.179221] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.181544] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.181657] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.181693] thermal_sys: Registered thermal governor 'fair_share' [ 0.181693] thermal_sys: Registered thermal governor 'bang_bang' [ 0.181693] thermal_sys: Registered thermal governor 'step_wise' [ 0.181693] thermal_sys: Registered thermal governor 'user_space' [ 0.181693] thermal_sys: Registered thermal governor 'power_allocator' [ 0.181693] EISA bus registered [ 0.181693] cpuidle: using governor ladder [ 0.181693] cpuidle: using governor menu [ 0.181732] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.181732] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.181732] PCI: not using MMCONFIG [ 0.181732] PCI: Using configuration type 1 for base access [ 0.182066] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.182079] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.182079] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.182079] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.182079] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.182079] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.182079] fbcon: Taking over console [ 0.182079] ACPI: Added _OSI(Module Device) [ 0.182079] ACPI: Added _OSI(Processor Device) [ 0.182079] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.182079] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297191] ACPI: 22 ACPI AML tables successfully acquired and loaded [ 0.302951] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.378388] ACPI: Dynamic OEM Table Load: [ 0.378388] ACPI: SSDT 0xFFFF8BB201167B00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.380324] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.382547] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20230331/dsopcode-198) [ 0.382568] No Local Variables are initialized for Method [_OSC] [ 0.382572] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 0.382574] Arg0: (____ptrval____) <Obj> Buffer(16) 6E B0 11 08 27 4A F9 44 [ 0.382590] Arg1: (____ptrval____) <Obj> Integer 0000000000000001 [ 0.382597] Arg2: (____ptrval____) <Obj> Integer 0000000000000002 [ 0.382603] Arg3: (____ptrval____) <Obj> Buffer(8) 01 00 00 00 FF 70 64 00 [ 0.382619] ACPI Error: Aborting method \_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20230331/psparse-529) [ 0.383452] ACPI: Dynamic OEM Table Load: [ 0.383470] ACPI: SSDT 0xFFFF8BB201184400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.385813] ACPI: Dynamic OEM Table Load: [ 0.385831] ACPI: SSDT 0xFFFF8BB20117B000 0004FD (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.388941] ACPI: Dynamic OEM Table Load: [ 0.388960] ACPI: SSDT 0xFFFF8BB20117E000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.391655] ACPI: Dynamic OEM Table Load: [ 0.391675] ACPI: SSDT 0xFFFF8BB20118C000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.395390] ACPI: Dynamic OEM Table Load: [ 0.395407] ACPI: SSDT 0xFFFF8BB201182400 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.403134] ACPI: EC: EC started [ 0.403137] ACPI: EC: interrupt blocked [ 0.421446] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.421452] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.421455] ACPI: Interpreter enabled [ 0.421559] ACPI: PM: (supports S0 S3 S4 S5) [ 0.421562] ACPI: Using IOAPIC for interrupt routing [ 0.424656] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.430459] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource [ 0.430477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.430479] PCI: Using E820 reservations for host bridge windows [ 0.431792] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.446728] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource [ 0.449464] ACPI: \_SB_.PCI0.RP03.PXP_: New power resource [ 0.452071] ACPI: \_SB_.PCI0.RP05.PXP_: New power resource [ 0.458210] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.469848] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource [ 0.470283] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource [ 0.470700] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource [ 0.483393] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource [ 0.487933] ACPI: \PIN_: New power resource [ 0.490205] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.490220] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.492531] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.497092] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC] [ 0.503440] PCI host bridge to bus 0000:00 [ 0.503445] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.503450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.503453] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.503456] pci_bus 0000:00: root bus resource [mem 0x9e800000-0xefffffff window] [ 0.503459] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.503462] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.503465] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.503513] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000 [ 0.503666] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000 [ 0.503682] pci 0000:00:02.0: reg 0x10: [mem 0xc7000000-0xc7ffffff 64bit] [ 0.503693] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.503701] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.503733] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.503747] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.504120] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.504137] pci 0000:00:04.0: reg 0x10: [mem 0x4022100000-0x4022107fff 64bit] [ 0.504793] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000 [ 0.504821] pci 0000:00:12.0: reg 0x10: [mem 0x4022111000-0x4022111fff 64bit] [ 0.505048] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330 [ 0.505070] pci 0000:00:14.0: reg 0x10: [mem 0xc8220000-0xc822ffff 64bit] [ 0.505153] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.506210] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000 [ 0.506241] pci 0000:00:14.2: reg 0x10: [mem 0xc8230000-0xc8231fff 64bit] [ 0.506258] pci 0000:00:14.2: reg 0x18: [mem 0x4022110000-0x4022110fff 64bit] [ 0.506570] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000 [ 0.506670] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.507729] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000 [ 0.507830] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.508829] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000 [ 0.508858] pci 0000:00:16.0: reg 0x10: [mem 0x402210d000-0x402210dfff 64bit] [ 0.508968] pci 0000:00:16.0: PME# supported from D3hot [ 0.510192] pci 0000:00:1c.0: [8086:9dbc] type 01 class 0x060400 [ 0.510344] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.510391] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.512188] pci 0000:00:1c.7: [8086:9dbf] type 01 class 0x060400 [ 0.512324] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.512362] pci 0000:00:1c.7: PTM enabled (root), 4ns granularity [ 0.514125] pci 0000:00:1d.0: [8086:9db4] type 01 class 0x060400 [ 0.514324] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.514385] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.516197] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100 [ 0.516913] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040100 [ 0.516969] pci 0000:00:1f.3: reg 0x10: [mem 0x4022108000-0x402210bfff 64bit] [ 0.517037] pci 0000:00:1f.3: reg 0x20: [mem 0x4022000000-0x40220fffff 64bit] [ 0.517186] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.519273] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500 [ 0.519310] pci 0000:00:1f.4: reg 0x10: [mem 0x402210c000-0x402210c0ff 64bit] [ 0.519339] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.519936] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000 [ 0.519959] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.520167] pci 0000:00:1f.6: [8086:15be] type 00 class 0x020000 [ 0.520208] pci 0000:00:1f.6: reg 0x10: [mem 0xc8200000-0xc821ffff] [ 0.520421] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.521187] pci 0000:01:00.0: [8086:15e7] type 01 class 0x060400 [ 0.521254] pci 0000:01:00.0: enabling Extended Tags [ 0.521391] pci 0000:01:00.0: supports D1 D2 [ 0.521392] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521502] pci 0000:01:00.0: PTM enabled, 4ns granularity [ 0.521537] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.521756] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.521764] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.521771] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.521880] pci 0000:02:00.0: [8086:15e7] type 01 class 0x060400 [ 0.521948] pci 0000:02:00.0: enabling Extended Tags [ 0.522075] pci 0000:02:00.0: supports D1 D2 [ 0.522077] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.522317] pci 0000:02:01.0: [8086:15e7] type 01 class 0x060400 [ 0.522384] pci 0000:02:01.0: enabling Extended Tags [ 0.522517] pci 0000:02:01.0: supports D1 D2 [ 0.522519] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.522755] pci 0000:02:02.0: [8086:15e7] type 01 class 0x060400 [ 0.522822] pci 0000:02:02.0: enabling Extended Tags [ 0.522944] pci 0000:02:02.0: supports D1 D2 [ 0.522946] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.523240] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 0.523252] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.523261] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.523354] pci 0000:03:00.0: [8086:15e8] type 00 class 0x088000 [ 0.523380] pci 0000:03:00.0: reg 0x10: [mem 0xc6000000-0xc603ffff] [ 0.523395] pci 0000:03:00.0: reg 0x14: [mem 0xc6040000-0xc6040fff] [ 0.523467] pci 0000:03:00.0: enabling Extended Tags [ 0.523597] pci 0000:03:00.0: supports D1 D2 [ 0.523599] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.523838] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.523850] pci 0000:02:00.0: bridge window [mem 0xc6000000-0xc60fffff] [ 0.523916] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 0.523927] pci 0000:02:01.0: bridge window [mem 0xb0000000-0xc5efffff] [ 0.523935] pci 0000:02:01.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.524057] pci 0000:39:00.0: [8086:15e9] type 00 class 0x0c0330 [ 0.524084] pci 0000:39:00.0: reg 0x10: [mem 0xc5f00000-0xc5f0ffff] [ 0.524175] pci 0000:39:00.0: enabling Extended Tags [ 0.524321] pci 0000:39:00.0: supports D1 D2 [ 0.524323] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.524459] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.524671] pci 0000:02:02.0: PCI bridge to [bus 39] [ 0.524683] pci 0000:02:02.0: bridge window [mem 0xc5f00000-0xc5ffffff] [ 0.525011] pci 0000:3a:00.0: [8086:2723] type 00 class 0x028000 [ 0.525088] pci 0000:3a:00.0: reg 0x10: [mem 0xc8100000-0xc8103fff 64bit] [ 0.525535] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.526702] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 0.526712] pci 0000:00:1c.7: bridge window [mem 0xc8100000-0xc81fffff] [ 0.527041] pci 0000:3b:00.0: [8086:f1a8] type 00 class 0x010802 [ 0.527071] pci 0000:3b:00.0: reg 0x10: [mem 0xc8000000-0xc8003fff 64bit] [ 0.527554] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 0.527562] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.534274] ACPI: EC: interrupt unblocked [ 0.534277] ACPI: EC: event unblocked [ 0.534292] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.534295] ACPI: EC: GPE=0x6e [ 0.534298] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.534302] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.534445] iommu: Default domain type: Translated [ 0.534445] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.534445] SCSI subsystem initialized [ 0.534445] libata version 3.00 loaded. [ 0.534445] ACPI: bus type USB registered [ 0.534445] usbcore: registered new interface driver usbfs [ 0.534445] usbcore: registered new interface driver hub [ 0.534445] usbcore: registered new device driver usb [ 0.534445] pps_core: LinuxPPS API ver. 1 registered [ 0.534445] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.534445] PTP clock support registered [ 0.534445] EDAC MC: Ver: 3.0.0 [ 0.534445] efivars: Registered efivars operations [ 0.534445] NetLabel: Initializing [ 0.534445] NetLabel: domain hash size = 128 [ 0.534445] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.534445] NetLabel: unlabeled traffic allowed by default [ 0.534445] mctp: management component transport protocol core [ 0.534445] NET: Registered PF_MCTP protocol family [ 0.534445] PCI: Using ACPI for IRQ routing [ 0.550987] PCI: pci_cache_line_size set to 64 bytes [ 0.551472] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.551476] e820: reserve RAM buffer [mem 0x930f0000-0x93ffffff] [ 0.551478] e820: reserve RAM buffer [mem 0x96f3a000-0x97ffffff] [ 0.551481] e820: reserve RAM buffer [mem 0x97c10000-0x97ffffff] [ 0.551483] e820: reserve RAM buffer [mem 0x25d800000-0x25fffffff] [ 0.551536] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.551536] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.551536] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.551536] vgaarb: loaded [ 0.554468] clocksource: Switched to clocksource tsc-early [ 0.570764] VFS: Disk quotas dquot_6.6.0 [ 0.570787] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.570988] AppArmor: AppArmor Filesystem Enabled [ 0.571067] pnp: PnP ACPI init [ 0.571330] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 0.572099] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.572105] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.572109] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.572112] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.572115] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.572118] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.572121] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.572859] system 00:02: [io 0x2000-0x20fe] has been reserved [ 0.573182] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.573187] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.573508] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.573714] system 00:08: [io 0x0200-0x027f] has been reserved [ 0.573719] system 00:08: [mem 0xfedf0000-0xfedfffff] has been reserved [ 0.577710] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.577715] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.577719] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.577721] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.577724] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.577728] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.577731] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.577734] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.578275] pnp: PnP ACPI: found 11 devices [ 0.584948] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.585061] NET: Registered PF_INET protocol family [ 0.585225] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.588127] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.588178] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.588276] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.588581] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.589024] TCP: Hash tables configured (established 65536 bind 65536) [ 0.589153] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.589202] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.589239] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.589322] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.589332] NET: Registered PF_XDP protocol family [ 0.589348] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 0.589356] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 1000 [ 0.589361] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 2000 [ 0.589376] pci 0000:00:15.0: BAR 0: assigned [mem 0x402210e000-0x402210efff 64bit] [ 0.589444] pci 0000:00:15.1: BAR 0: assigned [mem 0x402210f000-0x402210ffff 64bit] [ 0.589509] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x5fff] [ 0.589515] pci 0000:01:00.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.589519] pci 0000:02:01.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.589523] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.589531] pci 0000:02:00.0: bridge window [mem 0xc6000000-0xc60fffff] [ 0.589543] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 0.589547] pci 0000:02:01.0: bridge window [io 0x4000-0x4fff] [ 0.589553] pci 0000:02:01.0: bridge window [mem 0xb0000000-0xc5efffff] [ 0.589559] pci 0000:02:01.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589568] pci 0000:02:02.0: PCI bridge to [bus 39] [ 0.589575] pci 0000:02:02.0: bridge window [mem 0xc5f00000-0xc5ffffff] [ 0.589586] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 0.589589] pci 0000:01:00.0: bridge window [io 0x4000-0x4fff] [ 0.589596] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.589601] pci 0000:01:00.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589609] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.589613] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff] [ 0.589618] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xc60fffff] [ 0.589622] pci 0000:00:1c.0: bridge window [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589629] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 0.589634] pci 0000:00:1c.7: bridge window [mem 0xc8100000-0xc81fffff] [ 0.589642] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 0.589647] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.589657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.589660] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.589663] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.589666] pci_bus 0000:00: resource 7 [mem 0x9e800000-0xefffffff window] [ 0.589669] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.589672] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] [ 0.589675] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff] [ 0.589677] pci_bus 0000:01: resource 1 [mem 0xb0000000-0xc60fffff] [ 0.589680] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589683] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.589685] pci_bus 0000:02: resource 1 [mem 0xb0000000-0xc60fffff] [ 0.589688] pci_bus 0000:02: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589691] pci_bus 0000:03: resource 1 [mem 0xc6000000-0xc60fffff] [ 0.589694] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.589696] pci_bus 0000:04: resource 1 [mem 0xb0000000-0xc5efffff] [ 0.589699] pci_bus 0000:04: resource 2 [mem 0x4000000000-0x4021ffffff 64bit pref] [ 0.589702] pci_bus 0000:39: resource 1 [mem 0xc5f00000-0xc5ffffff] [ 0.589705] pci_bus 0000:3a: resource 1 [mem 0xc8100000-0xc81fffff] [ 0.589707] pci_bus 0000:3b: resource 1 [mem 0xc8000000-0xc80fffff] [ 0.589987] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.591652] PCI: CLS 128 bytes, default 64 [ 0.591685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.591687] software IO TLB: mapped [mem 0x0000000080695000-0x0000000084695000] (64MB) [ 0.591737] Trying to unpack rootfs image as initramfs... [ 0.592841] Initialise system trusted keyrings [ 0.592855] Key type blacklist registered [ 0.592930] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.592953] zbud: loaded [ 0.593320] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.593469] fuse: init (API version 7.38) [ 0.593684] integrity: Platform Keyring initialized [ 0.593691] integrity: Machine keyring initialized [ 0.607788] Key type asymmetric registered [ 0.607794] Asymmetric key parser 'x509' registered [ 0.607827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.607899] io scheduler mq-deadline registered [ 0.608405] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.608448] pcieport 0000:00:1c.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.609042] pcieport 0000:00:1c.7: PME: Signaling with IRQ 123 [ 0.609452] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 0.610304] pcieport 0000:02:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.610770] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.610873] efifb: probing for efifb [ 0.610905] efifb: showing boot graphics [ 0.612368] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k [ 0.612371] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.612375] efifb: scrolling: redraw [ 0.612376] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.612537] Console: switching to colour frame buffer device 240x67 [ 0.615962] fb0: EFI VGA frame buffer device [ 0.617792] ACPI: AC: AC Adapter [AC] (on-line) [ 0.617899] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.617934] ACPI: button: Sleep Button [SLPB] [ 0.617983] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.618011] ACPI: button: Lid Switch [LID] [ 0.618055] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.618083] ACPI: button: Power Button [PWRB] [ 0.618132] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.618212] ACPI: button: Power Button [PWRF] [ 0.620130] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.620136] ACPI: thermal: Thermal Zone [HEPZ] (30 C) [ 0.627391] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.627396] ACPI: thermal: Thermal Zone [CPUZ] (0 C) [ 0.633537] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.633542] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 0.637147] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.637153] ACPI: thermal: Thermal Zone [EXTZ] (40 C) [ 0.640763] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.640769] ACPI: thermal: Thermal Zone [LOCZ] (40 C) [ 0.646843] thermal LNXTHERM:05: registered as thermal_zone5 [ 0.646849] ACPI: thermal: Thermal Zone [BATZ] (34 C) [ 0.646912] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20230331/exoparg2-393) [ 0.646972] Initialized Local Variables for Method [GETP]: [ 0.646974] Local0: 00000000089b3f3a <Obj> Integer 0000000000000003 [ 0.646986] Initialized Arguments for Method [GETP]: (2 arguments defined for method invocation) [ 0.646988] Arg0: 000000001f56324c <Obj> Integer 0000000000000005 [ 0.646995] Arg1: 000000006ea506e5 <Obj> Integer 0000000000000003 [ 0.647006] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20230331/psparse-529) [ 0.647065] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20230331/psparse-529) [ 0.648774] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20230331/exoparg2-393) [ 0.648837] Initialized Local Variables for Method [GETP]: [ 0.648839] Local0: 000000006ea506e5 <Obj> Integer 0000000000000003 [ 0.648850] Initialized Arguments for Method [GETP]: (2 arguments defined for method invocation) [ 0.648852] Arg0: 000000001f56324c <Obj> Integer 0000000000000005 [ 0.648859] Arg1: 00000000e1208124 <Obj> Integer 0000000000000003 [ 0.648870] ACPI Error: Aborting method \_TZ.GETP due to previous error (AE_AML_PACKAGE_LIMIT) (20230331/psparse-529) [ 0.648912] ACPI Error: Aborting method \_TZ.CHGZ._CRT due to previous error (AE_AML_PACKAGE_LIMIT) (20230331/psparse-529) [ 0.648958] ACPI: thermal: [Firmware Bug]: No valid trip found [ 0.652605] thermal LNXTHERM:07: registered as thermal_zone6 [ 0.652610] ACPI: thermal: Thermal Zone [PCHZ] (0 C) [ 0.653050] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.658043] hpet_acpi_add: no address or irqs in _CRS [ 0.658081] Linux agpgart interface v0.103 [ 0.662518] tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22) [ 0.669503] ACPI: battery: Slot [BAT0] (battery present) [ 0.688913] loop: module loaded [ 0.689507] tun: Universal TUN/TAP device driver, 1.6 [ 0.689624] PPP generic driver version 2.4.2 [ 0.689888] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.690672] i8042: Detected active multiplexing controller, rev 1.1 [ 0.690986] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.690996] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.691051] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.691085] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.691115] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.691390] mousedev: PS/2 mouse device common for all mice [ 0.691925] rtc_cmos 00:04: RTC can wake from S4 [ 0.693463] rtc_cmos 00:04: registered as rtc0 [ 0.693697] rtc_cmos 00:04: setting system clock to 2024-05-24T08:41:11 UTC (1716540071) [ 0.693744] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram [ 0.693762] i2c_dev: i2c /dev entries driver [ 0.694676] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.694698] device-mapper: uevent: version 1.0.3 [ 0.694834] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.694887] platform eisa.0: Probing EISA bus 0 [ 0.694892] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.694895] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.694898] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.694900] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.694902] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.694905] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.694907] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.694909] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.694911] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.694913] platform eisa.0: EISA: Detected 0 cards [ 0.694919] intel_pstate: Intel P-state driver initializing [ 0.695618] intel_pstate: HWP enabled [ 0.696053] ledtrig-cpu: registered to indicate activity on CPUs [ 0.696236] intel_pmc_core intel_pmc_core.0: initialized [ 0.696299] drop_monitor: Initializing network drop monitor service [ 0.710350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.712462] NET: Registered PF_INET6 protocol family [ 0.984919] Freeing initrd memory: 68616K [ 0.989996] Segment Routing with IPv6 [ 0.990011] In-situ OAM (IOAM) with IPv6 [ 0.990053] NET: Registered PF_PACKET protocol family [ 0.990124] Key type dns_resolver registered [ 0.990999] microcode: Microcode Update Driver: v2.2. [ 0.991005] IPI shorthand broadcast: enabled [ 0.992165] sched_clock: Marking stable (980003552, 11261362)->(1063518597, -72253683) [ 0.992361] registered taskstats version 1 [ 0.993270] Loading compiled-in X.509 certificates [ 0.993694] Loaded X.509 cert 'Build time autogenerated kernel key: 73705a51282eea04e7eb4bef93768faf542bd3c0' [ 0.994062] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.994424] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.994426] blacklist: Loading compiled-in revocation X.509 certificates [ 0.994450] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.994460] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.994470] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.994480] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.994495] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.994505] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.994515] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.994525] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.995899] Key type .fscrypt registered [ 0.995901] Key type fscrypt-provisioning registered [ 0.995943] Key type trusted registered [ 0.998255] Key type encrypted registered [ 0.998258] AppArmor: AppArmor sha1 policy hashing enabled [ 0.999248] integrity: Loading X.509 certificate: UEFI:db [ 0.999337] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.999339] integrity: Loading X.509 certificate: UEFI:db [ 0.999357] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.999358] integrity: Loading X.509 certificate: UEFI:db [ 0.999389] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.000433] Loading compiled-in module X.509 certificates [ 1.000819] Loaded X.509 cert 'Build time autogenerated kernel key: 73705a51282eea04e7eb4bef93768faf542bd3c0' [ 1.000821] ima: Allocated hash algorithm: sha1 [ 1.040128] ima: No architecture policies found [ 1.040161] evm: Initialising EVM extended attributes: [ 1.040162] evm: security.selinux [ 1.040165] evm: security.SMACK64 [ 1.040167] evm: security.SMACK64EXEC [ 1.040168] evm: security.SMACK64TRANSMUTE [ 1.040170] evm: security.SMACK64MMAP [ 1.040171] evm: security.apparmor [ 1.040173] evm: security.ima [ 1.040174] evm: security.capability [ 1.040176] evm: HMAC attrs: 0x1 [ 1.040871] PM: Magic number: 8:776:675 [ 1.040975] vtconsole vtcon0: hash matches [ 1.048104] RAS: Correctable Errors collector initialized. [ 1.048194] clk: Disabling unused clocks [ 1.050434] Freeing unused decrypted memory: 2036K [ 1.051788] Freeing unused kernel image (initmem) memory: 4816K [ 1.067576] Write protecting the kernel read-only data: 34816k [ 1.068326] Freeing unused kernel image (rodata/data gap) memory: 1144K [ 1.101946] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.101953] Run /init as init process [ 1.101955] with arguments: [ 1.101956] /init [ 1.101958] splash [ 1.101959] with environment: [ 1.101960] HOME=/ [ 1.101961] TERM=linux [ 1.101962] BOOT_IMAGE=/boot/vmlinuz-6.5.0-35-generic [ 1.172812] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_7D1-911A-5F14-78EF-632E1637A197 has zero instances [ 1.172826] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: HASH_362-801B-1C3D-2638-F8882CF5E53F has zero instances [ 1.173750] wmi_bus wmi_bus-PNP0C14:02: WQZZ data block query control method not found [ 1.191043] hid: raw HID events driver (C) Jiri Kosina [ 1.198058] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.198378] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.199465] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 1.202214] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 1.202471] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.202520] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.202807] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.202814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.202820] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.202862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.202866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.202868] usb usb1: Product: xHCI Host Controller [ 1.202869] usb usb1: Manufacturer: Linux 6.5.0-35-generic xhci-hcd [ 1.202871] usb usb1: SerialNumber: ... [ 1.203030] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.203193] hub 1-0:1.0: USB hub found [ 1.203213] hub 1-0:1.0: 12 ports detected [ 1.203816] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.212257] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 1.212749] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.213181] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.213187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.213189] usb usb2: Product: xHCI Host Controller [ 1.213191] usb usb2: Manufacturer: Linux 6.5.0-35-generic xhci-hcd [ 1.213192] usb usb2: SerialNumber: ... [ 1.213688] hub 2-0:1.0: USB hub found [ 1.213707] hub 2-0:1.0: 6 ports detected [ 1.216382] usb: port power management may be unreliable [ 1.217158] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 1.217167] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 1.218305] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 1.218635] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 1.218642] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 1.218646] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.218685] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.218688] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.218690] usb usb3: Product: xHCI Host Controller [ 1.218692] usb usb3: Manufacturer: Linux 6.5.0-35-generic xhci-hcd [ 1.218694] usb usb3: SerialNumber: ... [ 1.218848] hub 3-0:1.0: USB hub found [ 1.218859] hub 3-0:1.0: 2 ports detected [ 1.219783] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.219787] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.219788] usb usb4: Product: xHCI Host Controller [ 1.219789] usb usb4: Manufacturer: Linux 6.5.0-35-generic xhci-hcd [ 1.219791] usb usb4: SerialNumber: ... [ 1.220089] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.220096] hub 4-0:1.0: USB hub found [ 1.220108] hub 4-0:1.0: 2 ports detected [ 1.220576] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.247739] ACPI: bus type thunderbolt registered [ 1.255650] e1000e: Intel(R) PRO/1000 Network Driver [ 1.255657] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.255743] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 1.256296] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.388855] nvme nvme0: pci function 0000:3b:00.0 [ 1.394889] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input11 [ 1.395092] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input12 [ 1.395341] hid-generic 0018:06CB:82F5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 1.398931] nvme nvme0: 8/0/0 default/read/poll queues [ 1.403195] nvme0n1: p1 p2 [ 1.443482] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.471319] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 1.511923] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) XXX [ 1.511937] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.512057] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 1.531543] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.607358] tsc: Refined TSC clocksource calibration: 1800.001 MHz [ 1.607375] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22aa45f0, max_idle_ns: 440795269146 ns [ 1.607435] clocksource: Switched to clocksource tsc [ 1.631855] usb 1-1: New USB device found, idVendor=0b0e, idProduct=245e, bcdDevice= 1.87 [ 1.631866] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.631871] usb 1-1: Product: Jabra Link 370 [ 1.631874] usb 1-1: SerialNumber: ... [ 1.759350] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 1.914040] usb 1-3: New USB device found, idVendor=03f0, idProduct=026a, bcdDevice= 3.33 [ 1.914052] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.914057] usb 1-3: Product: L830-EB [ 1.914064] usb 1-3: Manufacturer: HP Inc. [ 1.914068] usb 1-3: SerialNumber: ... [ 2.168666] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10 [ 2.815274] usb 1-8: new full-speed USB device number 5 using xhci_hcd [ 2.936949] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4730] [ 2.964546] usb 1-8: New USB device found, idVendor=06cb, idProduct=00b7, bcdDevice= 1.64 [ 2.964550] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.964551] usb 1-8: SerialNumber: ... [ 2.967155] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1184..] [ 2.967162] psmouse serio3: synaptics: Your touchpad (PNP: SYN3091 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 3.021932] psmouse serio3: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00523/0x840300/0x12e800/0x500000, board id: 3352, fw id: 2888704 [ 3.056633] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input14 [ 3.095280] usb 1-9: new high-speed USB device number 6 using xhci_hcd [ 3.263286] EXT4-fs (nvme0n1p2): mounted filesystem HASH_050-0BDA-9D6B-362C-DB383CD05E9E ro with ordered data mode. Quota mode: none. [ 3.291790] usb 1-9: New USB device found, idVendor=0408, idProduct=5343, bcdDevice= 0.08 [ 3.291795] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 3.291797] usb 1-9: Product: HP HD Camera [ 3.291799] usb 1-9: Manufacturer: Quanta [ 3.291800] usb 1-9: SerialNumber: ... [ 3.403236] systemd[1]: Inserted module 'autofs4' [ 3.423373] usb 1-10: new full-speed USB device number 7 using xhci_hcd [ 3.548126] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.548421] systemd[1]: Detected architecture x86-64. [ 3.548955] systemd[1]: Hostname set to ... [ 3.573359] usb 1-10: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 3.573374] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.592903] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 3.650969] block nvme0n1: the capability attribute has been deprecated. [ 3.739330] systemd[1]: /etc/systemd/system/vpnagentd.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/vpnagentd.pid \xe2\x86\x92 /run/vpnagentd.pid; please update the unit file accordingly. [ 3.757231] systemd[1]: Configuration file /lib/systemd/system/tmxbc.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 3.835466] systemd[1]: sshd.service: Cannot add dependency job, ignoring: Unit sshd.service failed to load properly, please adjust/correct and reload service manager: File exists [ 3.836164] systemd[1]: Queued start job for default target Graphical Interface. [ 3.853071] systemd[1]: Created slice Slice /system/modprobe. [ 3.853470] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.853658] systemd[1]: Created slice User and Session Slice. [ 3.853715] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.853878] systemd[1]: Set up automount ... [ 3.853941] systemd[1]: Reached target Remote File Systems. [ 3.853952] systemd[1]: Reached target Slice Units. [ 3.853967] systemd[1]: Reached target Mounting snaps. [ 3.853988] systemd[1]: Reached target Local Verity Protected Volumes. [ 3.854110] systemd[1]: Listening on Syslog Socket. [ 3.854178] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.854225] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.854375] systemd[1]: Listening on Journal Audit Socket. [ 3.854437] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.854510] systemd[1]: Listening on Journal Socket. [ 3.854620] systemd[1]: Listening on Network Service Netlink Socket. [ 3.854719] systemd[1]: Listening on udev Control Socket. [ 3.854774] systemd[1]: Listening on udev Kernel Socket. [ 3.855384] systemd[1]: Mounting Huge Pages File System... [ 3.856007] systemd[1]: Mounting POSIX Message Queue File System... [ 3.856775] systemd[1]: Mounting Kernel Debug File System... [ 3.857454] systemd[1]: Mounting Kernel Trace File System... [ 3.858871] systemd[1]: Starting Journal Service... [ 3.860087] systemd[1]: Starting Set the console keyboard layout... [ 3.860848] systemd[1]: Starting Create List of Static Device Nodes... [ 3.861636] systemd[1]: Starting Load Kernel Module configfs... [ 3.862646] systemd[1]: Starting Load Kernel Module drm... [ 3.863658] systemd[1]: Starting Load Kernel Module efi_pstore... [ 3.865100] systemd[1]: Starting Load Kernel Module fuse... [ 3.865453] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped. [ 3.865678] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.867780] pstore: Using crash dump compression: deflate [ 3.868321] systemd[1]: Starting Load Kernel Modules... [ 3.881945] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.895702] systemd[1]: Starting Coldplug All udev Devices... [ 3.914975] pstore: Registered efi_pstore as persistent store backend [ 3.915124] systemd[1]: Mounted Huge Pages File System. [ 3.915458] systemd[1]: Mounted POSIX Message Queue File System. [ 3.915587] systemd[1]: Mounted Kernel Debug File System. [ 3.915695] systemd[1]: Mounted Kernel Trace File System. [ 3.916258] systemd[1]: Finished Create List of Static Device Nodes. [ 3.916641] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.916943] systemd[1]: Finished Load Kernel Module configfs. [ 3.917120] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.917273] systemd[1]: Finished Load Kernel Module efi_pstore. [ 3.917435] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.917579] systemd[1]: Finished Load Kernel Module fuse. [ 3.918443] systemd[1]: Mounting FUSE Control File System... [ 3.919537] systemd[1]: Mounting Kernel Configuration File System... [ 3.920658] systemd[1]: Mounted FUSE Control File System. [ 3.921479] systemd[1]: Mounted Kernel Configuration File System. [ 3.944080] ACPI: bus type drm_connector registered [ 3.944793] systemd[1]: Started Journal Service. [ 3.948806] lp: driver loaded but no devices found [ 3.951683] ppdev: user-space parallel port driver [ 3.960333] EXT4-fs (nvme0n1p2): re-mounted HASH_050-0BDA-9D6B-362C-DB383CD05E9E r/w. Quota mode: none. [ 3.967617] Adding 4194300k swap on /swap.img. Priority:-2 extents:14 across:453025792k SSFS [ 3.970407] systemd-journald[321]: Received client request to flush runtime journal. [ 3.977228] systemd-journald[321]: File /var/log/journal/1f435466fe1043da9fb070db79177235/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 4.029671] loop0: detected capacity change from 0 to 136 [ 4.032446] loop1: detected capacity change from 0 to 8 [ 4.036831] loop2: detected capacity change from 0 to 330144 [ 4.041190] loop3: detected capacity change from 0 to 330136 [ 4.045580] loop4: detected capacity change from 0 to 113992 [ 4.049687] loop5: detected capacity change from 0 to 113992 [ 4.054127] loop6: detected capacity change from 0 to 130960 [ 4.057154] loop7: detected capacity change from 0 to 130960 [ 4.064864] loop8: detected capacity change from 0 to 151992 [ 4.066543] loop9: detected capacity change from 0 to 152040 [ 4.073870] loop10: detected capacity change from 0 to 135320 [ 4.076537] loop11: detected capacity change from 0 to 135328 [ 4.081877] loop12: detected capacity change from 0 to 2195704 [ 4.088890] loop13: detected capacity change from 0 to 2201568 [ 4.091973] loop14: detected capacity change from 0 to 549384 [ 4.096216] loop15: detected capacity change from 0 to 552192 [ 4.100883] loop16: detected capacity change from 0 to 337560 [ 4.103594] loop17: detected capacity change from 0 to 716176 [ 4.108698] loop18: detected capacity change from 0 to 1032504 [ 4.110055] loop19: detected capacity change from 0 to 1034424 [ 4.113496] loop20: detected capacity change from 0 to 187776 [ 4.115643] loop21: detected capacity change from 0 to 178216 [ 4.117612] loop22: detected capacity change from 0 to 178240 [ 4.120183] loop23: detected capacity change from 0 to 15064 [ 4.122033] loop24: detected capacity change from 0 to 15128 [ 4.124129] loop25: detected capacity change from 0 to 1372392 [ 4.127079] loop26: detected capacity change from 0 to 1376552 [ 4.128165] loop27: detected capacity change from 0 to 80072 [ 4.130410] loop28: detected capacity change from 0 to 79328 [ 4.132433] loop29: detected capacity change from 0 to 175680 [ 4.134217] loop30: detected capacity change from 0 to 175680 [ 4.135933] loop31: detected capacity change from 0 to 657576 [ 4.137706] loop32: detected capacity change from 0 to 657616 [ 4.139512] loop33: detected capacity change from 0 to 661400 [ 4.141662] loop34: detected capacity change from 0 to 927864 [ 4.143811] loop35: detected capacity change from 0 to 710400 [ 4.145729] loop36: detected capacity change from 0 to 710848 [ 4.147993] loop37: detected capacity change from 0 to 1011152 [ 4.149605] loop38: detected capacity change from 0 to 1016480 [ 4.307827] input: Wireless hotkeys as /devices/virtual/input/input16 [ 4.316473] Consider using thermal netlink events interface [ 4.392737] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 4.458201] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 4.464448] mc: Linux media interface: v0.10 [ 4.464867] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.466182] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.466416] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.471016] cdc_acm 1-3:1.2: ttyACM0: USB ACM device [ 4.471243] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.472007] spi-nor spi0.0: mx25l25635e (32768 Kbytes) [ 4.474991] usbcore: registered new interface driver usbhid [ 4.474999] usbhid: USB HID core driver [ 4.475215] hp_wmi: query 0x4 returned error 0x5 [ 4.483539] usbcore: registered new interface driver cdc_acm [ 4.483546] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.486218] Creating 1 MTD partitions on "0000:00:1f.5": [ 4.486224] 0x000000000000-0x000002000000 : "BIOS" [ 4.491144] videodev: Linux video capture interface: v2.00 [ 4.493403] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 4.497755] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.544601] intel_rapl_common: Found RAPL domain package [ 4.544606] intel_rapl_common: Found RAPL domain dram [ 4.547750] usbcore: registered new interface driver cdc_ether [ 4.548012] Intel(R) Wireless WiFi driver for Linux [ 4.548194] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002) [ 4.548563] Bluetooth: Core ver 2.22 [ 4.548588] NET: Registered PF_BLUETOOTH protocol family [ 4.548590] Bluetooth: HCI device and connection manager initialized [ 4.548595] Bluetooth: HCI socket layer initialized [ 4.548597] Bluetooth: L2CAP socket layer initialized [ 4.548601] Bluetooth: SCO socket layer initialized [ 4.556912] usbcore: registered new interface driver cdc_ncm [ 4.557991] iwlwifi 0000:3a:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000 [ 4.558118] iwlwifi 0000:3a:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100 [ 4.559077] usbcore: registered new interface driver cdc_wdm [ 4.575627] iwlwifi 0000:3a:00.0: api flags index 2 larger than supported by driver [ 4.575647] iwlwifi 0000:3a:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 4.575852] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.575856] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.575858] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.575859] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.575861] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.575862] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.576501] iwlwifi 0000:3a:00.0: loaded firmware version 77.2df8986f.0 cc-a0-77.ucode op_mode iwlmvm [ 4.584547] cryptd: max_cpu_qlen set to 1000 [ 4.586382] usb 1-9: Found UVC 1.50 device HP HD Camera (0408:5343) [ 4.594329] usbcore: registered new interface driver btusb [ 4.595775] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 4.596782] Bluetooth: hci0: Device revision is 1 [ 4.596789] Bluetooth: hci0: Secure boot is enabled [ 4.596790] Bluetooth: hci0: OTP lock is enabled [ 4.596791] Bluetooth: hci0: API lock is enabled [ 4.596792] Bluetooth: hci0: Debug lock is disabled [ 4.596793] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4.607404] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 4.607562] Bluetooth: hci0: Boot Address: 0x24800 [ 4.607565] Bluetooth: hci0: Firmware Version: 126-5.22 [ 4.610222] usb 1-9: Found UVC 1.50 device HP HD Camera (0408:5343) [ 4.620326] usbcore: registered new interface driver uvcvideo [ 4.626020] AVX2 version of gcm_enc/dec engaged. [ 4.627098] cdc_mbim 1-3:1.0: setting rx_max = 16384 [ 4.628160] cdc_mbim 1-3:1.0: cdc-wdm0: USB WDM device [ 4.628331] cdc_mbim 1-3:1.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-3, CDC MBIM, XXX [ 4.628370] usbcore: registered new interface driver cdc_mbim [ 4.671312] AES CTR mode by8 optimization enabled [ 4.701064] input: SYNA3091:00 06CB:82F5 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input18 [ 4.701198] input: SYNA3091:00 06CB:82F5 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3091:00/0018:06CB:82F5.0001/input/input19 [ 4.701318] hid-multitouch 0018:06CB:82F5.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3091:00 06CB:82F5] on i2c-SYNA3091:00 [ 5.150995] intel_rapl_common: Found RAPL domain package [ 5.151003] intel_rapl_common: Found RAPL domain core [ 5.151002] input: Jabra Link 370 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0B0E:245E.0002/input/input21 [ 5.151004] intel_rapl_common: Found RAPL domain uncore [ 5.151006] intel_rapl_common: Found RAPL domain dram [ 5.151007] intel_rapl_common: Found RAPL domain psys [ 5.169067] Console: switching to colour dummy device 80x25 [ 5.169545] i915 0000:00:02.0: vgaarb: deactivate vga console [ 5.181212] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.183051] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 5.188621] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 5.188970] iwlwifi 0000:3a:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 5.189120] thermal thermal_zone12: failed to read out thermal zone (-61) [ 5.207710] jabra 0003:0B0E:245E.0002: input,hiddev1,hidraw1: USB HID v1.11 Device [Jabra Link 370] on usb-0000:00:14.0-1/input3 [ 5.212189] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.212401] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.228762] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 5.228773] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 5.228779] i915 0000:00:02.0: [drm] [ENCODER:128:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it [ 5.257747] usbcore: registered new interface driver snd-usb-audio [ 5.328997] intel_tcc_cooling: Programmable TCC Offset detected [ 5.338866] iwlwifi 0000:3a:00.0: Detected RF HR B3, rfid=0x10a100 [ 5.359079] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.359202] sof-audio-pci-intel-cnl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.359218] sof-audio-pci-intel-cnl 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.359855] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 5.410073] iwlwifi 0000:3a:00.0: base HW address: XXX [ 5.659326] iwlwifi 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 6.130620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.130626] Bluetooth: BNEP filters: protocol multicast [ 6.130633] Bluetooth: BNEP socket layer initialized [ 6.315843] Bluetooth: hci0: Waiting for firmware download to complete [ 6.316741] Bluetooth: hci0: Firmware loaded in 1669268 usecs [ 6.316778] Bluetooth: hci0: Waiting for device to boot [ 6.331756] Bluetooth: hci0: Device booted in 14638 usecs [ 6.331769] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 6.334099] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 6.334739] loop39: detected capacity change from 0 to 8 [ 6.335757] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.336750] Bluetooth: hci0: Firmware revision 0.3 build 126 week 5 2022 [ 6.338766] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 6.400337] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 6.403820] Bluetooth: MGMT ver 1.22 [ 6.404419] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.404974] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22 [ 6.405482] sof-audio-pci-intel-cnl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.410067] NET: Registered PF_ALG protocol family [ 6.478036] fbcon: i915drmfb (fb0) is primary device [ 6.593297] iwlwifi 0000:3a:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 7.645811] Console: switching to colour frame buffer device 240x67 [ 7.663848] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 7.695407] sof-audio-pci-intel-cnl 0000:00:1f.3: use msi interrupt mode [ 7.726889] sof-audio-pci-intel-cnl 0000:00:1f.3: hda codecs found, mask 5 [ 7.726893] sof-audio-pci-intel-cnl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 7.726898] sof-audio-pci-intel-cnl 0000:00:1f.3: DMICs detected in NHLT tables: 4 [ 7.731417] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:0:0-b678a [ 7.731421] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0 [ 7.731429] sof-audio-pci-intel-cnl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 7.834592] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:0:0-b678a [ 7.834596] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0 [ 7.845853] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology: ABI 3:20:0 Kernel ABI 3:23:0 [ 7.846161] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 7.860453] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC215: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.860459] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.860462] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.860465] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 7.860466] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 7.860468] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 8.572717] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input23 [ 8.572892] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input24 [ 8.573098] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input25 [ 8.573244] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input26 [ 8.573431] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input27 [ 9.141734] warning: `kesl' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 9.192514] bpfilter: Loaded bpfilter_umh pid 2050 [ 9.192959] Started bpfilter [ 9.572295] wlp58s0: authenticate with XXX [ 9.572322] wlp58s0: 80 MHz not supported, disabling VHT [ 9.583012] wlp58s0: send auth to XXX (try 1/3) [ 9.615582] wlp58s0: authenticated [ 9.619302] wlp58s0: associate with XXX (try 1/3) [ 9.628322] wlp58s0: RX AssocResp from XXX (capab=0x431 status=0 aid=4) [ 9.673928] wlp58s0: associated [ 13.571224] wlp58s0: Connection to AP XXX lost [ 13.949007] wlp58s0: authenticate with XXX [ 13.959246] wlp58s0: send auth to XXX (try 1/3) [ 13.988628] wlp58s0: authenticated [ 13.991305] wlp58s0: associate with XXX (try 1/3) [ 13.995108] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=5) [ 14.029931] wlp58s0: associated [ 14.056819] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 15.881336] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.884664] Bridge firewalling registered [ 15.999017] Initializing XFRM netlink socket [ 16.473164] rfkill: input handler disabled [ 17.706893] dsa_filter_hook: loading out-of-tree module taints kernel. [ 17.706899] dsa_filter_hook: module verification failed: signature and/or required key missing - tainting kernel [ 17.757306] dsa_filter: module license 'Proprietary' taints kernel. [ 17.757313] Disabling lock debugging due to kernel taint [ 17.757316] dsa_filter: module license taints kernel. [ 17.860379] dsa: loading filter XXX.XXX.XXX.XXX [ 17.871850] dsa: registered on device 10:121 [ 17.871924] dsa: registered on ssl device 10:120 [ 17.872118] dsa: filter loaded OK [ 47.806352] wlp58s0: disconnect from AP XXX for new auth to XXX [ 47.884573] wlp58s0: authenticate with XXX [ 47.884656] wlp58s0: 80 MHz not supported, disabling VHT [ 47.904426] wlp58s0: send auth to XXX (try 1/3) [ 47.940593] wlp58s0: authenticated [ 47.947748] wlp58s0: associate with XXX (try 1/3) [ 47.958492] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 48.006006] wlp58s0: associated [ 136.714966] wlp58s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 146.752176] systemd-journald[321]: File /var/log/journal/1f435466fe1043da9fb070db79177235/user-XXXX.journal corrupted or uncleanly shut down, renaming and replacing. [ 169.748852] rfkill: input handler enabled [ 171.653621] Bluetooth: RFCOMM TTY layer initialized [ 171.653632] Bluetooth: RFCOMM socket layer initialized [ 171.653638] Bluetooth: RFCOMM ver 1.11 [ 192.980482] rfkill: input handler disabled [ 351.566508] wlp58s0: authenticate with XXX [ 351.566531] wlp58s0: 80 MHz not supported, disabling VHT [ 351.577590] wlp58s0: send auth to XXX (try 1/3) [ 351.611340] wlp58s0: authenticated [ 351.615955] wlp58s0: associate with XXX (try 1/3) [ 351.624223] wlp58s0: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [ 351.662106] wlp58s0: associated [ 363.806052] wlp58s0: deauthenticated from XXX (Reason: 2=PREV_AUTH_NOT_VALID) [ 364.217568] wlp58s0: authenticate with XXX [ 364.233281] wlp58s0: send auth to XXX (try 1/3) [ 364.263385] wlp58s0: authenticated [ 364.267290] wlp58s0: associate with XXX (try 1/3) [ 364.270086] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 364.308847] wlp58s0: associated [ 364.370924] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 398.799662] wlp58s0: disconnect from AP XXX for new auth to XXX [ 398.897056] wlp58s0: authenticate with XXX [ 398.897074] wlp58s0: 80 MHz not supported, disabling VHT [ 398.908792] wlp58s0: send auth to XXX (try 1/3) [ 398.955292] wlp58s0: authenticated [ 398.959757] wlp58s0: associate with XXX (try 1/3) [ 399.067752] wlp58s0: associate with XXX (try 2/3) [ 399.078201] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 401.349821] wlp58s0: authenticate with XXX [ 401.362350] wlp58s0: send auth to XXX (try 1/3) [ 401.396888] wlp58s0: authenticated [ 401.399618] wlp58s0: associate with XXX (try 1/3) [ 401.405088] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 401.461575] wlp58s0: associated [ 401.461626] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 502.301207] wlp58s0: disconnect from AP XXX for new auth to XXX [ 502.362594] wlp58s0: authenticate with XXX [ 502.362674] wlp58s0: 80 MHz not supported, disabling VHT [ 502.381322] wlp58s0: send auth to XXX (try 1/3) [ 502.547700] wlp58s0: send auth to XXX (try 2/3) [ 502.552062] wlp58s0: authenticated [ 502.555734] wlp58s0: associate with XXX (try 1/3) [ 502.663870] wlp58s0: associate with XXX (try 2/3) [ 502.767737] wlp58s0: associate with XXX (try 3/3) [ 502.967455] wlp58s0: association with XXX timed out [ 503.165595] wlp58s0: authenticate with XXX [ 503.177787] wlp58s0: send auth to XXX (try 1/3) [ 503.210386] wlp58s0: authenticated [ 503.211364] wlp58s0: associate with XXX (try 1/3) [ 503.225538] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 503.283671] wlp58s0: associated [ 503.283707] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 536.690732] wlp58s0: disconnect from AP XXX for new auth to XXX [ 536.792979] wlp58s0: authenticate with XXX [ 536.793065] wlp58s0: 80 MHz not supported, disabling VHT [ 536.812122] wlp58s0: send auth to XXX (try 1/3) [ 536.846089] wlp58s0: authenticated [ 536.847339] wlp58s0: associate with XXX (try 1/3) [ 536.955573] wlp58s0: associate with XXX (try 2/3) [ 536.964652] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 539.186068] wlp58s0: authenticate with XXX [ 539.186099] wlp58s0: 80 MHz not supported, disabling VHT [ 539.202756] wlp58s0: send auth to XXX (try 1/3) [ 539.272279] wlp58s0: authenticated [ 539.275708] wlp58s0: associate with XXX (try 1/3) [ 539.284805] wlp58s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 539.329949] wlp58s0: associated [ 572.371586] wlp58s0: disconnect from AP XXX for new auth to XXX [ 572.483740] wlp58s0: authenticate with XXX [ 572.499573] wlp58s0: send auth to XXX (try 1/3) [ 572.529829] wlp58s0: authenticated [ 572.531388] wlp58s0: associate with XXX (try 1/3) [ 572.534006] wlp58s0: RX ReassocResp from XXX (capab=0x411 status=0 aid=2) [ 572.581459] wlp58s0: associated [ 572.581509] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 703.721205] wlp58s0: disconnect from AP XXX for new auth to XXX [ 703.811919] wlp58s0: authenticate with XXX [ 703.811932] wlp58s0: 80 MHz not supported, disabling VHT [ 703.823502] wlp58s0: send auth to XXX (try 1/3) [ 703.853470] wlp58s0: authenticated [ 703.855372] wlp58s0: associate with XXX (try 1/3) [ 703.862826] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=5) [ 703.899882] wlp58s0: associated [ 851.042669] wlp58s0: Connection to AP XXX lost [ 851.410193] wlp58s0: authenticate with XXX [ 851.427626] wlp58s0: send auth to XXX (try 1/3) [ 851.461381] wlp58s0: authenticated [ 851.463591] wlp58s0: associate with XXX (try 1/3) [ 851.469631] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=6) [ 851.529997] wlp58s0: associated [ 851.530047] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 884.586313] wlp58s0: disconnect from AP XXX for new auth to XXX [ 884.695345] wlp58s0: authenticate with XXX [ 884.695423] wlp58s0: 80 MHz not supported, disabling VHT [ 884.713673] wlp58s0: send auth to XXX (try 1/3) [ 884.746348] wlp58s0: authenticated [ 884.751346] wlp58s0: associate with XXX (try 1/3) [ 884.755626] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 884.803610] wlp58s0: associated [ 893.508865] wlp58s0: Connection to AP XXX lost [ 893.905821] wlp58s0: authenticate with XXX [ 893.917314] wlp58s0: send auth to XXX (try 1/3) [ 893.953277] wlp58s0: authenticated [ 893.955616] wlp58s0: associate with XXX (try 1/3) [ 893.959376] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=6) [ 894.018180] wlp58s0: associated [ 894.018231] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 927.462373] wlp58s0: disconnect from AP XXX for new auth to XXX [ 927.565741] wlp58s0: authenticate with XXX [ 927.565826] wlp58s0: 80 MHz not supported, disabling VHT [ 927.585336] wlp58s0: send auth to XXX (try 1/3) [ 927.618064] wlp58s0: authenticated [ 927.619642] wlp58s0: associate with XXX (try 1/3) [ 927.624440] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 927.670294] wlp58s0: associated [ 934.844874] wlp58s0: Connection to AP XXX lost [ 935.170031] wlp58s0: authenticate with XXX [ 935.180812] wlp58s0: send auth to XXX (try 1/3) [ 935.210904] wlp58s0: authenticated [ 935.215627] wlp58s0: associate with XXX (try 1/3) [ 935.218345] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=5) [ 935.271013] wlp58s0: associated [ 935.271042] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 968.725250] wlp58s0: disconnect from AP XXX for new auth to XXX [ 968.786819] wlp58s0: authenticate with XXX [ 968.786973] wlp58s0: 80 MHz not supported, disabling VHT [ 968.799790] wlp58s0: send auth to XXX (try 1/3) [ 968.836242] wlp58s0: authenticated [ 968.843361] wlp58s0: associate with XXX (try 1/3) [ 968.951392] wlp58s0: associate with XXX (try 2/3) [ 968.954063] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 970.621630] wlp58s0: authenticate with XXX [ 970.629041] wlp58s0: send auth to XXX (try 1/3) [ 970.663805] wlp58s0: authenticated [ 970.671365] wlp58s0: associate with XXX (try 1/3) [ 970.678276] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=5) [ 970.717681] wlp58s0: associated [ 970.717733] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1037.338449] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1037.433861] wlp58s0: authenticate with XXX [ 1037.433950] wlp58s0: 80 MHz not supported, disabling VHT [ 1037.452396] wlp58s0: send auth to XXX (try 1/3) [ 1037.487653] wlp58s0: authenticated [ 1037.491626] wlp58s0: associate with XXX (try 1/3) [ 1037.499605] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 1037.550436] wlp58s0: associated [ 1080.150504] wlp58s0: Connection to AP XXX lost [ 1080.506006] wlp58s0: authenticate with XXX [ 1080.523620] wlp58s0: send auth to XXX (try 1/3) [ 1080.553124] wlp58s0: authenticated [ 1080.555608] wlp58s0: associate with XXX (try 1/3) [ 1080.558397] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 1080.617923] wlp58s0: associated [ 1080.617972] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1113.626432] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1113.753364] wlp58s0: authenticate with XXX [ 1113.753457] wlp58s0: 80 MHz not supported, disabling VHT [ 1113.768927] wlp58s0: send auth to XXX (try 1/3) [ 1113.806249] wlp58s0: authenticated [ 1113.807639] wlp58s0: associate with XXX (try 1/3) [ 1113.819954] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 1113.865882] wlp58s0: associated [ 1122.441829] wlp58s0: Connection to AP XXX lost [ 1122.773748] wlp58s0: authenticate with XXX [ 1122.787618] wlp58s0: send auth to XXX (try 1/3) [ 1122.817954] wlp58s0: authenticated [ 1122.823544] wlp58s0: associate with XXX (try 1/3) [ 1122.826386] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=5) [ 1122.880137] wlp58s0: associated [ 1122.880206] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1156.329671] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1156.432641] wlp58s0: authenticate with XXX [ 1156.432654] wlp58s0: 80 MHz not supported, disabling VHT [ 1156.451628] wlp58s0: send auth to XXX (try 1/3) [ 1156.482530] wlp58s0: authenticated [ 1156.487375] wlp58s0: associate with XXX (try 1/3) [ 1156.491355] wlp58s0: RX ReassocResp from XXX (capab=0x431 status=0 aid=3) [ 1156.541479] wlp58s0: associated [ 1567.062107] wlp58s0: Connection to AP XXX lost [ 1567.421958] wlp58s0: authenticate with XXX [ 1567.439585] wlp58s0: send auth to XXX (try 1/3) [ 1567.469217] wlp58s0: authenticated [ 1567.471648] wlp58s0: associate with XXX (try 1/3) [ 1567.475369] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=4) [ 1567.532542] wlp58s0: associated [ 1567.532579] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1600.555291] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1600.653017] wlp58s0: authenticate with XXX [ 1600.653095] wlp58s0: 80 MHz not supported, disabling VHT [ 1600.671728] wlp58s0: send auth to XXX (try 1/3) [ 1600.704272] wlp58s0: authenticated [ 1600.707345] wlp58s0: associate with XXX (try 1/3) [ 1600.811804] wlp58s0: associate with XXX (try 2/3) [ 1600.821892] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 1602.681628] wlp58s0: authenticate with XXX [ 1602.681648] wlp58s0: 80 MHz not supported, disabling VHT [ 1602.690203] wlp58s0: send auth to XXX (try 1/3) [ 1602.721422] wlp58s0: authenticated [ 1602.723658] wlp58s0: associate with XXX (try 1/3) [ 1602.728735] wlp58s0: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [ 1602.788355] wlp58s0: associated [ 1608.141916] wlp58s0: Connection to AP XXX lost [ 1608.428967] wlp58s0: authenticate with XXX [ 1608.440856] wlp58s0: send auth to XXX (try 1/3) [ 1608.473258] wlp58s0: authenticated [ 1608.475343] wlp58s0: associate with XXX (try 1/3) [ 1608.489554] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=4) [ 1608.525926] wlp58s0: associated [ 1608.549351] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1706.522155] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1706.626911] wlp58s0: authenticate with XXX [ 1706.626925] wlp58s0: 80 MHz not supported, disabling VHT [ 1706.642645] wlp58s0: send auth to XXX (try 1/3) [ 1706.676813] wlp58s0: authenticated [ 1706.679404] wlp58s0: associate with XXX (try 1/3) [ 1706.787379] wlp58s0: associate with XXX (try 2/3) [ 1706.793120] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 1707.956806] wlp58s0: authenticate with XXX [ 1707.965119] wlp58s0: send auth to XXX (try 1/3) [ 1707.996265] wlp58s0: authenticated [ 1708.003383] wlp58s0: associate with XXX (try 1/3) [ 1708.005838] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=4) [ 1708.040751] wlp58s0: associated [ 1708.081573] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1878.201103] wlp58s0: disconnect from AP XXX for new auth to XXX [ 1878.293081] wlp58s0: authenticate with XXX [ 1878.293095] wlp58s0: 80 MHz not supported, disabling VHT [ 1878.311675] wlp58s0: send auth to XXX (try 1/3) [ 1878.349704] wlp58s0: authenticated [ 1878.351392] wlp58s0: associate with XXX (try 1/3) [ 1878.366157] wlp58s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [ 1880.077990] wlp58s0: authenticate with XXX [ 1880.086955] wlp58s0: send auth to XXX (try 1/3) [ 1880.119690] wlp58s0: authenticated [ 1880.123662] wlp58s0: associate with XXX (try 1/3) [ 1880.127689] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=4) [ 1880.180395] wlp58s0: associated [ 1880.218064] wlp58s0: Limiting TX power to 20 (23 - 3) dBm as advertised by XXX [ 1892.325490] Non-volatile memory driver v1.3 [ 1895.346338] st: Version 20160209, fixed bufsize 32768, s/g segs 256


Hardware for Linux and BSD

GitHub