[ 8357.681829] ieee80211 phy20: channel change: 2432 -> 2437 failed (2). [ 8357.947010] ieee80211 phy20: channel change: -1 -> 2437 failed (2). [ 8358.212148] ieee80211 phy20: channel change: -1 -> 2437 failed (2). [ 8358.476820] ieee80211 phy20: channel change: -1 -> 2437 failed (2). [ 8358.476848] usb 1-4.2: restart device (7) [ 8359.695737] usb 1-4.2: firmware upload failed (-110). [ 8359.792347] usb 1-4.2: Failed to restart device (-110). [ 8359.840482] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840498] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840504] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840509] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840513] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840517] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840521] ieee80211 phy20: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8359.840526] ieee80211 phy20: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8359.840530] ieee80211 phy20: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8360.064565] usb 1-4.2: reset high-speed USB device number 9 using ehci-pci [ 8360.340573] usb 1-4.2: reset high-speed USB device number 9 using ehci-pci [ 8360.499949] usb 1-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8360.499969] usb 1-4.2: firmware API: 1.9.6 2012-07-07 [ 8360.906503] ath: EEPROM regdomain: 0x8114 [ 8360.906517] ath: EEPROM indicates we should expect a country code [ 8360.906521] ath: doing EEPROM country->regdmn map search [ 8360.906524] ath: country maps to regdmn code: 0x37 [ 8360.906533] ath: Country alpha2 being used: DE [ 8360.906536] ath: Regpair used: 0x37 [ 8360.906614] ieee80211 phy21: Selected rate control algorithm 'minstrel_ht' [ 8360.914534] carl9170 1-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8360.914927] usb 1-4.2: Atheros AR9170 is registered as 'phy21' [ 8362.174399] ieee80211 phy21: channel change: 2432 -> 2437 failed (2). [ 8362.439471] ieee80211 phy21: channel change: -1 -> 2437 failed (2). [ 8362.704484] ieee80211 phy21: channel change: -1 -> 2437 failed (2). [ 8362.969420] ieee80211 phy21: channel change: -1 -> 2437 failed (2). [ 8362.969448] usb 1-4.2: restart device (7) [ 8364.207821] usb 1-4.2: firmware upload failed (-110). [ 8364.556548] usb 1-4.2: reset high-speed USB device number 9 using ehci-pci [ 8364.824573] usb 1-4.2: reset high-speed USB device number 9 using ehci-pci [ 8364.983914] usb 1-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8364.983934] usb 1-4.2: firmware API: 1.9.6 2012-07-07 [ 8365.389719] ath: EEPROM regdomain: 0x8114 [ 8365.389730] ath: EEPROM indicates we should expect a country code [ 8365.389734] ath: doing EEPROM country->regdmn map search [ 8365.389737] ath: country maps to regdmn code: 0x37 [ 8365.389742] ath: Country alpha2 being used: DE [ 8365.389745] ath: Regpair used: 0x37 [ 8365.389814] ieee80211 phy22: Selected rate control algorithm 'minstrel_ht' [ 8365.399505] carl9170 1-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8365.400889] usb 1-4.2: Atheros AR9170 is registered as 'phy22' [ 8372.561643] net_ratelimit: 66 callbacks suppressed [ 8372.561661] r8169 0000:05:00.0 enp5s0: Link is Down [ 8375.759808] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8376.052764] usb 1-4: USB disconnect, device number 5 [ 8376.052780] usb 1-4.2: USB disconnect, device number 9 [ 8376.061849] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061873] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061885] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061895] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061904] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061912] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061920] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8376.061929] ieee80211 phy22: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8381.844557] usb 2-4: new high-speed USB device number 7 using ehci-pci [ 8382.004017] usb 2-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 8382.004036] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8382.004045] usb 2-4: Product: USB2.1 Hub [ 8382.004051] usb 2-4: Manufacturer: GenesysLogic [ 8382.005546] hub 2-4:1.0: USB hub found [ 8382.005876] hub 2-4:1.0: 4 ports detected [ 8382.512558] usb 2-4.2: new high-speed USB device number 8 using ehci-pci [ 8382.675766] usb 2-4.2: New USB device found, idVendor=057c, idProduct=84ff, bcdDevice= 4.04 [ 8382.675784] usb 2-4.2: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 8382.675793] usb 2-4.2: Product: FRITZ!WLAN USB Stick N [ 8382.675800] usb 2-4.2: Manufacturer: AVM Berlin [ 8382.675805] usb 2-4.2: SerialNumber: ... [ 8382.678445] usb-storage 2-4.2:1.0: USB Mass Storage device detected [ 8382.678928] scsi host7: usb-storage 2-4.2:1.0 [ 8383.693605] scsi 7:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS [ 8383.695817] sr 7:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 8383.732635] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 8383.732998] sr 7:0:0:0: Attached scsi generic sg6 type 5 [ 8400.000210] net_ratelimit: 55 callbacks suppressed [ 8400.000226] r8169 0000:05:00.0 enp5s0: Link is Down [ 8408.714819] usb 2-4.2: USB disconnect, device number 8 [ 8409.944498] usb 2-4.2: new high-speed USB device number 9 using ehci-pci [ 8410.111754] usb 2-4.2: New USB device found, idVendor=057c, idProduct=8401, bcdDevice= 4.04 [ 8410.111779] usb 2-4.2: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 8410.111788] usb 2-4.2: Product: FRITZ!WLAN USB Stick N [ 8410.111794] usb 2-4.2: Manufacturer: AVM Berlin [ 8410.111800] usb 2-4.2: SerialNumber: ... [ 8410.224516] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8410.376013] usb 2-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8410.376033] usb 2-4.2: firmware API: 1.9.6 2012-07-07 [ 8410.783819] ath: EEPROM regdomain: 0x8114 [ 8410.783833] ath: EEPROM indicates we should expect a country code [ 8410.783838] ath: doing EEPROM country->regdmn map search [ 8410.783841] ath: country maps to regdmn code: 0x37 [ 8410.783845] ath: Country alpha2 being used: DE [ 8410.783848] ath: Regpair used: 0x37 [ 8410.783920] ieee80211 phy23: Selected rate control algorithm 'minstrel_ht' [ 8410.792244] usb 2-4.2: Atheros AR9170 is registered as 'phy23' [ 8410.812946] carl9170 2-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8411.716773] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8417.584360] wlx246511cac39c: authenticate with XXX [ 8417.659291] wlx246511cac39c: send auth to XXX (try 1/3) [ 8417.665276] wlx246511cac39c: authenticated [ 8417.668568] wlx246511cac39c: associate with XXX (try 1/3) [ 8417.673507] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 8417.677582] wlx246511cac39c: associated [ 8417.753852] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 8561.866672] ieee80211 phy23: channel change: 2417 -> 2437 failed (2). [ 8562.131810] ieee80211 phy23: channel change: -1 -> 2437 failed (2). [ 8562.396808] ieee80211 phy23: channel change: -1 -> 2437 failed (2). [ 8562.661655] ieee80211 phy23: channel change: -1 -> 2437 failed (2). [ 8562.661681] usb 2-4.2: restart device (7) [ 8563.887803] usb 2-4.2: firmware upload failed (-110). [ 8563.983752] usb 2-4.2: Failed to restart device (-110). [ 8563.996591] ieee80211 phy23: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8563.996615] ieee80211 phy23: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8564.040613] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 8564.040986] ieee80211 phy23: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8564.041016] ieee80211 phy23: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8564.252473] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8564.532455] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8564.691782] usb 2-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8564.691804] usb 2-4.2: firmware API: 1.9.6 2012-07-07 [ 8565.094070] ath: EEPROM regdomain: 0x8114 [ 8565.094084] ath: EEPROM indicates we should expect a country code [ 8565.094089] ath: doing EEPROM country->regdmn map search [ 8565.094092] ath: country maps to regdmn code: 0x37 [ 8565.094096] ath: Country alpha2 being used: DE [ 8565.094100] ath: Regpair used: 0x37 [ 8565.094176] ieee80211 phy24: Selected rate control algorithm 'minstrel_ht' [ 8565.100243] usb 2-4.2: Atheros AR9170 is registered as 'phy24' [ 8565.109797] carl9170 2-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8566.377731] ieee80211 phy24: channel change: 2432 -> 2437 failed (2). [ 8566.642935] ieee80211 phy24: channel change: -1 -> 2437 failed (2). [ 8566.907899] ieee80211 phy24: channel change: -1 -> 2437 failed (2). [ 8567.172819] ieee80211 phy24: channel change: -1 -> 2437 failed (2). [ 8567.172849] usb 2-4.2: restart device (7) [ 8568.399771] usb 2-4.2: firmware upload failed (-110). [ 8568.496454] usb 2-4.2: Failed to restart device (-110). [ 8568.544631] ieee80211 phy24: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8568.544779] ieee80211 phy24: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8568.728570] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8568.996564] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8569.155851] usb 2-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8569.155871] usb 2-4.2: firmware API: 1.9.6 2012-07-07 [ 8569.562922] ath: EEPROM regdomain: 0x8114 [ 8569.562933] ath: EEPROM indicates we should expect a country code [ 8569.562938] ath: doing EEPROM country->regdmn map search [ 8569.562941] ath: country maps to regdmn code: 0x37 [ 8569.562945] ath: Country alpha2 being used: DE [ 8569.562948] ath: Regpair used: 0x37 [ 8569.563018] ieee80211 phy25: Selected rate control algorithm 'minstrel_ht' [ 8569.573177] carl9170 2-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8569.577972] usb 2-4.2: Atheros AR9170 is registered as 'phy25' [ 8570.826192] ieee80211 phy25: channel change: 2432 -> 2437 failed (2). [ 8571.091514] ieee80211 phy25: channel change: -1 -> 2437 failed (2). [ 8571.356354] ieee80211 phy25: channel change: -1 -> 2437 failed (2). [ 8571.621317] ieee80211 phy25: channel change: -1 -> 2437 failed (2). [ 8571.621341] usb 2-4.2: restart device (7) [ 8572.847826] usb 2-4.2: firmware upload failed (-110). [ 8572.943883] usb 2-4.2: Failed to restart device (-110). [ 8572.980802] ieee80211 phy25: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8573.180559] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8573.448554] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8573.607914] usb 2-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8573.607934] usb 2-4.2: firmware API: 1.9.6 2012-07-07 [ 8574.010125] ath: EEPROM regdomain: 0x8114 [ 8574.010138] ath: EEPROM indicates we should expect a country code [ 8574.010143] ath: doing EEPROM country->regdmn map search [ 8574.010145] ath: country maps to regdmn code: 0x37 [ 8574.010149] ath: Country alpha2 being used: DE [ 8574.010153] ath: Regpair used: 0x37 [ 8574.010225] ieee80211 phy26: Selected rate control algorithm 'minstrel_ht' [ 8574.018301] usb 2-4.2: Atheros AR9170 is registered as 'phy26' [ 8574.021121] carl9170 2-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8575.286633] ieee80211 phy26: channel change: 2432 -> 2437 failed (2). [ 8575.551836] ieee80211 phy26: channel change: -1 -> 2437 failed (2). [ 8575.816808] ieee80211 phy26: channel change: -1 -> 2437 failed (2). [ 8576.081773] ieee80211 phy26: channel change: -1 -> 2437 failed (2). [ 8576.081798] usb 2-4.2: restart device (7) [ 8577.327793] usb 2-4.2: firmware upload failed (-110). [ 8577.424590] usb 2-4.2: Failed to restart device (-110). [ 8577.464813] ieee80211 phy26: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 8577.652560] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8577.920559] usb 2-4.2: reset high-speed USB device number 9 using ehci-pci [ 8578.079877] usb 2-4.2: driver API: 1.9.9 2016-02-15 [1-1] [ 8578.079896] usb 2-4.2: firmware API: 1.9.6 2012-07-07 [ 8578.487822] ath: EEPROM regdomain: 0x8114 [ 8578.487836] ath: EEPROM indicates we should expect a country code [ 8578.487840] ath: doing EEPROM country->regdmn map search [ 8578.487843] ath: country maps to regdmn code: 0x37 [ 8578.487847] ath: Country alpha2 being used: DE [ 8578.487851] ath: Regpair used: 0x37 [ 8578.487923] ieee80211 phy27: Selected rate control algorithm 'minstrel_ht' [ 8578.493903] carl9170 2-4.2:1.0 wlx246511cac39c: renamed from wlan0 [ 8578.496742] usb 2-4.2: Atheros AR9170 is registered as 'phy27' [ 8580.484535] usb 2-4.2: no command feedback received (-110). [ 8580.484560] usb 2-4.2: restart device (6) [ 8581.508525] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8582.532490] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8583.556554] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8584.580539] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8585.604536] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8586.628541] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8587.652536] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8588.676524] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8589.700527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8590.724528] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8591.748529] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8592.772527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8593.796527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8594.820526] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8595.844531] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8596.868534] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8597.892527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8598.916527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8599.940529] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8600.964536] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8601.988532] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8603.012528] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8604.036526] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8605.060527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8606.084531] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8607.108526] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8608.132534] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8609.156525] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8610.180527] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8611.204528] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8612.228533] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8613.252492] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8614.276538] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8615.300535] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8616.324531] ieee80211 phy27: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8617.348536] ieee80211 phy27: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 8618.372539] ieee80211 phy27: writing reg 0x1d0104 (val 0x1) failed (-110) [ 8620.422777] usb 2-4.2: kill pending tx urbs. [ 8621.585098] usb 2-4.2: device restarted successfully. [ 8621.600580] ieee80211 phy27: Hardware restart was requested [ 8622.628534] ------------[ cut here ]------------ [ 8622.628543] Hardware became unavailable during restart. [ 8622.628615] WARNING: CPU: 2 PID: 27027 at net/mac80211/util.c:2340 ieee80211_reconfig+0xd3/0x1080 [mac80211] [ 8622.628814] Modules linked in: carl9170 ath ccm rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 libarc4 xt_MASQUERADE xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bpfilter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq kvm_amd snd_seq_device ccp snd_timer snd kvm soundcore k10temp mac_hid efi_pstore sch_fq_codel iptable_filter ip6table_filter ip6_tables br_netfilter bridge stp llc arp_tables ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp parport ip_tables x_tables autofs4 amdgpu iommu_v2 gpu_sched radeon uas usb_storage [ 8622.629023] i2c_algo_bit drm_ttm_helper hid_generic ttm pata_acpi usbhid hid drm_kms_helper syscopyarea sysfillrect sysimgblt r8169 realtek fb_sys_fops cec pata_atiixp rc_core xhci_pci ahci i2c_piix4 drm xhci_pci_renesas libahci [ 8622.629082] CPU: 2 PID: 27027 Comm: kworker/2:2 Tainted: G OE 5.13.0-52-generic #59~20.04.1-Ubuntu [ 8622.629093] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS L1.81 10/02/2013 [ 8622.629099] Workqueue: events_freezable ieee80211_restart_work [mac80211] [ 8622.629239] RIP: 0010:ieee80211_reconfig+0xd3/0x1080 [mac80211] [ 8622.629400] Code: 0f 85 31 03 00 00 41 c6 84 24 6c 05 00 00 00 4c 89 e7 e8 e0 41 fc ff 41 89 c6 85 c0 74 13 48 c7 c7 a0 df 3f c1 e8 d7 df df d8 <0f> 0b eb c1 88 5d cf 49 8b 44 24 40 44 8b a8 b8 00 00 00 e8 55 3a [ 8622.629409] RSP: 0018:ffffbae5c392fdd8 EFLAGS: 00010286 [ 8622.629417] RAX: 0000000000000000 RBX: ffff9b90d9481948 RCX: 0000000000000027 [ 8622.629423] RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9b91bbb20988 [ 8622.629428] RBP: ffffbae5c392fe20 R08: ffff9b91bbb20980 R09: ffffbae5c392fbb0 [ 8622.629434] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9b90d9480820 [ 8622.629438] R13: ffff9b90d9481948 R14: 00000000ffffff92 R15: ffff9b91bbb347c0 [ 8622.629444] FS: 0000000000000000(0000) GS:ffff9b91bbb00000(0000) knlGS:0000000000000000 [ 8622.629451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8622.629457] CR2: 000016e1003e2000 CR3: 000000006caf8000 CR4: 00000000000006e0 [ 8622.629463] Call Trace: [ 8622.629468] <TASK> [ 8622.629477] ieee80211_restart_work+0x109/0x170 [mac80211] [ 8622.629616] process_one_work+0x220/0x3c0 [ 8622.629629] worker_thread+0x4d/0x3f0 [ 8622.629639] ? process_one_work+0x3c0/0x3c0 [ 8622.629648] kthread+0x12b/0x150 [ 8622.629656] ? set_kthread_struct+0x40/0x40 [ 8622.629665] ret_from_fork+0x22/0x30 [ 8622.629680] </TASK> [ 8622.629683] ---[ end trace 9dcaecbd077cb80f ]--- [ 8622.630023] ------------[ cut here ]------------ [ 8622.630028] wlx246511cac39c: Failed check-sdata-in-driver check, flags: 0x0 [ 8622.630083] WARNING: CPU: 2 PID: 27027 at net/mac80211/driver-ops.c:97 drv_remove_interface+0xe8/0xf0 [mac80211] [ 8622.630236] Modules linked in: carl9170 ath ccm rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 libarc4 xt_MASQUERADE xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bpfilter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq kvm_amd snd_seq_device ccp snd_timer snd kvm soundcore k10temp mac_hid efi_pstore sch_fq_codel iptable_filter ip6table_filter ip6_tables br_netfilter bridge stp llc arp_tables ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp parport ip_tables x_tables autofs4 amdgpu iommu_v2 gpu_sched radeon uas usb_storage [ 8622.630433] i2c_algo_bit drm_ttm_helper hid_generic ttm pata_acpi usbhid hid drm_kms_helper syscopyarea sysfillrect sysimgblt r8169 realtek fb_sys_fops cec pata_atiixp rc_core xhci_pci ahci i2c_piix4 drm xhci_pci_renesas libahci [ 8622.630488] CPU: 2 PID: 27027 Comm: kworker/2:2 Tainted: G W OE 5.13.0-52-generic #59~20.04.1-Ubuntu [ 8622.630497] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS L1.81 10/02/2013 [ 8622.630502] Workqueue: events_freezable ieee80211_restart_work [mac80211] [ 8622.630641] RIP: 0010:drv_remove_interface+0xe8/0xf0 [mac80211] [ 8622.630780] Code: 75 92 48 8b 83 80 04 00 00 48 8d b3 a0 04 00 00 48 c7 c7 30 c3 3f c1 c6 05 e6 94 0b 00 01 48 85 c0 48 0f 45 f0 e8 62 99 e3 d8 <0f> 0b e9 63 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 49 89 d7 [ 8622.630788] RSP: 0018:ffffbae5c392fc60 EFLAGS: 00010286 [ 8622.630795] RAX: 0000000000000000 RBX: ffff9b90f2178940 RCX: 0000000000000027 [ 8622.630800] RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9b91bbb20988 [ 8622.630806] RBP: ffffbae5c392fc70 R08: ffff9b91bbb20980 R09: ffffbae5c392fa38 [ 8622.630811] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9b90d9480820 [ 8622.630816] R13: ffff9b90f2179640 R14: ffff9b90d9481078 R15: ffff9b90d9480820 [ 8622.630821] FS: 0000000000000000(0000) GS:ffff9b91bbb00000(0000) knlGS:0000000000000000 [ 8622.630828] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8622.630833] CR2: 000016e1003e2000 CR3: 000000006caf8000 CR4: 00000000000006e0 [ 8622.630839] Call Trace: [ 8622.630842] <TASK> [ 8622.630848] ieee80211_do_stop+0x56e/0x7c0 [mac80211] [ 8622.630998] ? _raw_spin_unlock_bh+0x1e/0x20 [ 8622.631011] ? dev_reset_queue.constprop.0+0x40/0x90 [ 8622.631022] ieee80211_stop+0x41/0xb0 [mac80211] [ 8622.631170] __dev_close_many+0xa2/0x110 [ 8622.631181] dev_close_many+0x7f/0x120 [ 8622.631191] dev_close.part.0+0x41/0x70 [ 8622.631201] dev_close+0x18/0x20 [ 8622.631210] cfg80211_shutdown_all_interfaces+0x50/0xf0 [cfg80211] [ 8622.631371] ieee80211_restart_work+0x139/0x170 [mac80211] [ 8622.631509] process_one_work+0x220/0x3c0 [ 8622.631521] worker_thread+0x4d/0x3f0 [ 8622.631530] ? process_one_work+0x3c0/0x3c0 [ 8622.631539] kthread+0x12b/0x150 [ 8622.631546] ? set_kthread_struct+0x40/0x40 [ 8622.631555] ret_from_fork+0x22/0x30 [ 8622.631569] </TASK> [ 8622.631572] ---[ end trace 9dcaecbd077cb810 ]--- [ 8622.631622] ------------[ cut here ]------------ [ 8622.631625] WARNING: CPU: 2 PID: 27027 at net/mac80211/driver-ops.c:36 drv_stop+0xc3/0xd0 [mac80211] [ 8622.631767] Modules linked in: carl9170 ath ccm rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 libarc4 xt_MASQUERADE xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bpfilter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq kvm_amd snd_seq_device ccp snd_timer snd kvm soundcore k10temp mac_hid efi_pstore sch_fq_codel iptable_filter ip6table_filter ip6_tables br_netfilter bridge stp llc arp_tables ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp parport ip_tables x_tables autofs4 amdgpu iommu_v2 gpu_sched radeon uas usb_storage [ 8622.631959] i2c_algo_bit drm_ttm_helper hid_generic ttm pata_acpi usbhid hid drm_kms_helper syscopyarea sysfillrect sysimgblt r8169 realtek fb_sys_fops cec pata_atiixp rc_core xhci_pci ahci i2c_piix4 drm xhci_pci_renesas libahci [ 8622.632012] CPU: 2 PID: 27027 Comm: kworker/2:2 Tainted: G W OE 5.13.0-52-generic #59~20.04.1-Ubuntu [ 8622.632020] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS L1.81 10/02/2013 [ 8622.632025] Workqueue: events_freezable ieee80211_restart_work [mac80211] [ 8622.632163] RIP: 0010:drv_stop+0xc3/0xd0 [mac80211] [ 8622.632301] Code: 3e 89 c0 48 0f a3 05 cc d8 3f da 73 96 48 8b 05 63 0b 0c 00 48 85 c0 74 0c 48 8b 78 08 48 89 de e8 02 35 04 00 e9 79 ff ff ff <0f> 0b 5b 5d c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 [ 8622.632308] RSP: 0018:ffffbae5c392fc50 EFLAGS: 00010246 [ 8622.632314] RAX: 0000000000000000 RBX: ffff9b90d9480820 RCX: 0000000000000000 [ 8622.632319] RDX: ffff9b90df934500 RSI: 0000000000000282 RDI: ffff9b90d9480820 [ 8622.632325] RBP: ffffbae5c392fc58 R08: ffff9b9180050c00 R09: ffff9b9180402da0 [ 8622.632330] R10: 0000000000000000 R11: ffffffff9b46cdd8 R12: ffff9b90d9480820 [ 8622.632335] R13: ffff9b90f2179640 R14: ffff9b90d9481078 R15: ffff9b90d9480820 [ 8622.632340] FS: 0000000000000000(0000) GS:ffff9b91bbb00000(0000) knlGS:0000000000000000 [ 8622.632346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8622.632352] CR2: 000016e1003e2000 CR3: 000000006caf8000 CR4: 00000000000006e0 [ 8622.632357] Call Trace: [ 8622.632360] <TASK> [ 8622.632364] ieee80211_stop_device+0x46/0x50 [mac80211] [ 8622.632578] ieee80211_do_stop+0x59b/0x7c0 [mac80211] [ 8622.632730] ? _raw_spin_unlock_bh+0x1e/0x20 [ 8622.632741] ? dev_reset_queue.constprop.0+0x40/0x90 [ 8622.632752] ieee80211_stop+0x41/0xb0 [mac80211] [ 8622.632899] __dev_close_many+0xa2/0x110 [ 8622.632910] dev_close_many+0x7f/0x120 [ 8622.632920] dev_close.part.0+0x41/0x70 [ 8622.632929] dev_close+0x18/0x20 [ 8622.632938] cfg80211_shutdown_all_interfaces+0x50/0xf0 [cfg80211] [ 8622.633081] ieee80211_restart_work+0x139/0x170 [mac80211] [ 8622.633220] process_one_work+0x220/0x3c0 [ 8622.633232] worker_thread+0x4d/0x3f0 [ 8622.633241] ? process_one_work+0x3c0/0x3c0 [ 8622.633250] kthread+0x12b/0x150 [ 8622.633258] ? set_kthread_struct+0x40/0x40 [ 8622.633266] ret_from_fork+0x22/0x30 [ 8622.633280] </TASK> [ 8622.633283] ---[ end trace 9dcaecbd077cb811 ]--- [ 8821.508097] usb 2-4.2: USB disconnect, device number 9 [ 8822.532545] usb 2-4.2: kill pending tx urbs. [ 8823.556539] usb 2-4.2: stuck tx urbs! [ 8830.440523] usb 2-4.3: new high-speed USB device number 10 using ehci-pci [ 8830.603898] usb 2-4.3: New USB device found, idVendor=057c, idProduct=84ff, bcdDevice= 4.04 [ 8830.603916] usb 2-4.3: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 8830.603926] usb 2-4.3: Product: FRITZ!WLAN USB Stick N [ 8830.603933] usb 2-4.3: Manufacturer: AVM Berlin [ 8830.603938] usb 2-4.3: SerialNumber: ... [ 8830.606516] usb-storage 2-4.3:1.0: USB Mass Storage device detected [ 8830.607040] scsi host7: usb-storage 2-4.3:1.0 [ 8831.629673] scsi 7:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS [ 8831.631872] sr 7:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 8831.700627] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 8831.701041] sr 7:0:0:0: Attached scsi generic sg6 type 5 [ 8834.169684] usb 2-4: USB disconnect, device number 7 [ 8834.169700] usb 2-4.3: USB disconnect, device number 10 [ 8884.328536] usb 2-4: new high-speed USB device number 11 using ehci-pci [ 8884.488047] usb 2-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 8884.488066] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8884.488074] usb 2-4: Product: USB2.1 Hub [ 8884.488081] usb 2-4: Manufacturer: GenesysLogic [ 8884.489437] hub 2-4:1.0: USB hub found [ 8884.489755] hub 2-4:1.0: 4 ports detected [ 8884.996568] usb 2-4.3: new high-speed USB device number 12 using ehci-pci [ 8885.159794] usb 2-4.3: New USB device found, idVendor=057c, idProduct=84ff, bcdDevice= 4.04 [ 8885.159813] usb 2-4.3: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 8885.159822] usb 2-4.3: Product: FRITZ!WLAN USB Stick N [ 8885.159829] usb 2-4.3: Manufacturer: AVM Berlin [ 8885.159834] usb 2-4.3: SerialNumber: ... [ 8885.162032] usb-storage 2-4.3:1.0: USB Mass Storage device detected [ 8885.162657] scsi host7: usb-storage 2-4.3:1.0 [ 8886.189875] scsi 7:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS [ 8886.191898] sr 7:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 8886.240627] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 8886.240972] sr 7:0:0:0: Attached scsi generic sg6 type 5 [ 8911.399525] usb 2-4.3: USB disconnect, device number 12 [ 8912.528543] usb 2-4.3: new high-speed USB device number 13 using ehci-pci [ 8912.691903] usb 2-4.3: New USB device found, idVendor=057c, idProduct=8401, bcdDevice= 4.04 [ 8912.691921] usb 2-4.3: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 8912.691931] usb 2-4.3: Product: FRITZ!WLAN USB Stick N [ 8912.691937] usb 2-4.3: Manufacturer: AVM Berlin [ 8912.691943] usb 2-4.3: SerialNumber: ... [ 8912.804546] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 8912.955977] usb 2-4.3: driver API: 1.9.9 2016-02-15 [1-1] [ 8912.955996] usb 2-4.3: firmware API: 1.9.6 2012-07-07 [ 8913.364191] ath: EEPROM regdomain: 0x8114 [ 8913.364205] ath: EEPROM indicates we should expect a country code [ 8913.364209] ath: doing EEPROM country->regdmn map search [ 8913.364212] ath: country maps to regdmn code: 0x37 [ 8913.364216] ath: Country alpha2 being used: DE [ 8913.364219] ath: Regpair used: 0x37 [ 8913.364289] ieee80211 phy28: Selected rate control algorithm 'minstrel_ht' [ 8913.375386] usb 2-4.3: Atheros AR9170 is registered as 'phy28' [ 8913.378520] carl9170 2-4.3:1.0 wlx246511cac39c: renamed from wlan0 [ 8920.114779] wlx246511cac39c: authenticate with XXX [ 8920.189060] wlx246511cac39c: send auth to XXX (try 1/3) [ 8920.194965] wlx246511cac39c: authenticated [ 8920.196500] wlx246511cac39c: associate with XXX (try 1/3) [ 8920.203504] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 8920.207330] wlx246511cac39c: associated [ 8920.293592] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 8934.714045] ieee80211 phy28: channel change: 5700 -> 2437 failed (2). [ 8936.462119] ieee80211 phy28: channel change: 5785 -> 2437 failed (2). [ 8936.727370] ieee80211 phy28: channel change: -1 -> 2437 failed (2). [ 8939.538997] ieee80211 phy28: channel change: 5210 -> 2437 failed (2). [ 8955.358651] ieee80211 phy28: channel change: 2412 -> 2437 failed (2). [ 8957.150408] ieee80211 phy28: channel change: 2427 -> 2437 failed (2). [ 8957.415699] ieee80211 phy28: channel change: -1 -> 2437 failed (2). [ 8958.884493] usb 2-4.3: no command feedback received (-110). [ 8958.884520] usb 2-4.3: restart device (6) [ 8959.908542] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 8960.932500] ieee80211 phy28: writing reg 0x1d0104 (val 0x3) failed (-110) [ 8962.982719] usb 2-4.3: kill pending tx urbs. [ 8965.156500] usb 2-4.3: firmware upload failed (-110). [ 8965.251554] usb 2-4.3: Failed to restart device (-110). [ 8965.280736] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280761] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280774] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280784] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280792] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280801] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280809] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280817] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.280826] ieee80211 phy28: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 8965.304528] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 8965.548503] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 8965.820459] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 8965.979888] usb 2-4.3: driver API: 1.9.9 2016-02-15 [1-1] [ 8965.979909] usb 2-4.3: firmware API: 1.9.6 2012-07-07 [ 8966.390561] ath: EEPROM regdomain: 0x8114 [ 8966.390573] ath: EEPROM indicates we should expect a country code [ 8966.390577] ath: doing EEPROM country->regdmn map search [ 8966.390580] ath: country maps to regdmn code: 0x37 [ 8966.390584] ath: Country alpha2 being used: DE [ 8966.390588] ath: Regpair used: 0x37 [ 8966.390656] ieee80211 phy29: Selected rate control algorithm 'minstrel_ht' [ 8966.401376] usb 2-4.3: Atheros AR9170 is registered as 'phy29' [ 8966.403118] carl9170 2-4.3:1.0 wlx246511cac39c: renamed from wlan0 [ 8971.498479] wlx246511cac39c: authenticate with XXX [ 8971.573734] wlx246511cac39c: send auth to XXX (try 1/3) [ 8971.579652] wlx246511cac39c: authenticated [ 8971.580491] wlx246511cac39c: associate with XXX (try 1/3) [ 8971.588617] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 8971.592948] wlx246511cac39c: associated [ 8971.670259] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 8992.126842] net_ratelimit: 30 callbacks suppressed [ 8993.900660] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9014.316985] wlx246511cac39c: authenticate with XXX [ 9014.391446] wlx246511cac39c: send auth to XXX (try 1/3) [ 9014.397372] wlx246511cac39c: authenticated [ 9014.404557] wlx246511cac39c: associate with XXX (try 1/3) [ 9014.409319] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9014.413700] wlx246511cac39c: associated [ 9014.486008] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9027.910924] ieee80211 phy29: channel change: 5805 -> 2437 failed (2). [ 9028.176040] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9029.590340] ieee80211 phy29: channel change: 5170 -> 2437 failed (2). [ 9029.855588] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9030.120949] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9030.898569] ieee80211 phy29: channel change: 5190 -> 2437 failed (2). [ 9031.686450] ieee80211 phy29: channel change: 5210 -> 2437 failed (2). [ 9031.951616] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9032.216600] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9032.481439] ieee80211 phy29: channel change: -1 -> 2437 failed (2). [ 9032.481464] usb 2-4.3: restart device (7) [ 9033.711705] usb 2-4.3: firmware upload failed (-110). [ 9033.808341] usb 2-4.3: Failed to restart device (-110). [ 9033.824540] ieee80211 phy29: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9033.824579] ieee80211 phy29: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9033.825071] ieee80211 phy29: reading regs failed (-5) [ 9033.848482] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9033.848858] ieee80211 phy29: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9033.848873] ieee80211 phy29: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9034.096438] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9034.372482] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9034.531599] usb 2-4.3: driver API: 1.9.9 2016-02-15 [1-1] [ 9034.531611] usb 2-4.3: firmware API: 1.9.6 2012-07-07 [ 9034.936837] ath: EEPROM regdomain: 0x8114 [ 9034.936850] ath: EEPROM indicates we should expect a country code [ 9034.936854] ath: doing EEPROM country->regdmn map search [ 9034.936857] ath: country maps to regdmn code: 0x37 [ 9034.936861] ath: Country alpha2 being used: DE [ 9034.936865] ath: Regpair used: 0x37 [ 9034.936934] ieee80211 phy30: Selected rate control algorithm 'minstrel_ht' [ 9034.941782] usb 2-4.3: Atheros AR9170 is registered as 'phy30' [ 9034.949810] carl9170 2-4.3:1.0 wlx246511cac39c: renamed from wlan0 [ 9036.202654] ieee80211 phy30: channel change: 2432 -> 2437 failed (2). [ 9036.467713] ieee80211 phy30: channel change: -1 -> 2437 failed (2). [ 9036.732644] ieee80211 phy30: channel change: -1 -> 2437 failed (2). [ 9036.997648] ieee80211 phy30: channel change: -1 -> 2437 failed (2). [ 9036.997677] usb 2-4.3: restart device (7) [ 9038.227748] usb 2-4.3: firmware upload failed (-110). [ 9038.323727] usb 2-4.3: Failed to restart device (-110). [ 9038.356716] ieee80211 phy30: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9038.564508] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9038.832547] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9038.991896] usb 2-4.3: driver API: 1.9.9 2016-02-15 [1-1] [ 9038.991917] usb 2-4.3: firmware API: 1.9.6 2012-07-07 [ 9039.399691] ath: EEPROM regdomain: 0x8114 [ 9039.399703] ath: EEPROM indicates we should expect a country code [ 9039.399707] ath: doing EEPROM country->regdmn map search [ 9039.399710] ath: country maps to regdmn code: 0x37 [ 9039.399714] ath: Country alpha2 being used: DE [ 9039.399718] ath: Regpair used: 0x37 [ 9039.399785] ieee80211 phy31: Selected rate control algorithm 'minstrel_ht' [ 9039.405761] usb 2-4.3: Atheros AR9170 is registered as 'phy31' [ 9039.410460] carl9170 2-4.3:1.0 wlx246511cac39c: renamed from wlan0 [ 9040.645947] ieee80211 phy31: channel change: 2432 -> 2437 failed (2). [ 9040.911162] ieee80211 phy31: channel change: -1 -> 2437 failed (2). [ 9041.176126] ieee80211 phy31: channel change: -1 -> 2437 failed (2). [ 9041.441093] ieee80211 phy31: channel change: -1 -> 2437 failed (2). [ 9041.441118] usb 2-4.3: restart device (7) [ 9042.671731] usb 2-4.3: firmware upload failed (-110). [ 9042.768428] usb 2-4.3: Failed to restart device (-110). [ 9042.808790] ieee80211 phy31: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9042.984564] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9043.252536] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9043.411832] usb 2-4.3: driver API: 1.9.9 2016-02-15 [1-1] [ 9043.411852] usb 2-4.3: firmware API: 1.9.6 2012-07-07 [ 9043.816741] ath: EEPROM regdomain: 0x8114 [ 9043.816753] ath: EEPROM indicates we should expect a country code [ 9043.816757] ath: doing EEPROM country->regdmn map search [ 9043.816760] ath: country maps to regdmn code: 0x37 [ 9043.816764] ath: Country alpha2 being used: DE [ 9043.816767] ath: Regpair used: 0x37 [ 9043.816832] ieee80211 phy32: Selected rate control algorithm 'minstrel_ht' [ 9043.827178] usb 2-4.3: Atheros AR9170 is registered as 'phy32' [ 9043.829319] carl9170 2-4.3:1.0 wlx246511cac39c: renamed from wlan0 [ 9045.082410] ieee80211 phy32: channel change: 2432 -> 2437 failed (2). [ 9045.347610] ieee80211 phy32: channel change: -1 -> 2437 failed (2). [ 9045.612581] ieee80211 phy32: channel change: -1 -> 2437 failed (2). [ 9045.877573] ieee80211 phy32: channel change: -1 -> 2437 failed (2). [ 9045.877596] usb 2-4.3: restart device (7) [ 9047.119819] usb 2-4.3: firmware upload failed (-110). [ 9047.215757] usb 2-4.3: Failed to restart device (-110). [ 9047.256811] ieee80211 phy32: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9047.464550] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9047.736528] usb 2-4.3: reset high-speed USB device number 13 using ehci-pci [ 9047.817257] usb 2-4: USB disconnect, device number 11 [ 9047.817273] usb 2-4.3: USB disconnect, device number 0 [ 9048.264507] usb 2-4.3: device not accepting address 13, error -22 [ 9063.124538] usb 2-4: new high-speed USB device number 14 using ehci-pci [ 9063.311867] usb 2-4: New USB device found, idVendor=057c, idProduct=84ff, bcdDevice= 4.04 [ 9063.311885] usb 2-4: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 9063.311895] usb 2-4: Product: FRITZ!WLAN USB Stick N [ 9063.311901] usb 2-4: Manufacturer: AVM Berlin [ 9063.311907] usb 2-4: SerialNumber: ... [ 9063.314496] usb-storage 2-4:1.0: USB Mass Storage device detected [ 9063.314992] scsi host7: usb-storage 2-4:1.0 [ 9064.333821] scsi 7:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS [ 9064.335841] sr 7:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 9064.388616] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 9064.389047] sr 7:0:0:0: Attached scsi generic sg6 type 5 [ 9064.593206] usb 2-4: USB disconnect, device number 14 [ 9065.852538] usb 2-4: new high-speed USB device number 15 using ehci-pci [ 9066.039887] usb 2-4: New USB device found, idVendor=057c, idProduct=8401, bcdDevice= 4.04 [ 9066.039906] usb 2-4: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 9066.039916] usb 2-4: Product: FRITZ!WLAN USB Stick N [ 9066.039922] usb 2-4: Manufacturer: AVM Berlin [ 9066.039928] usb 2-4: SerialNumber: ... [ 9066.176538] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9066.352090] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9066.352109] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9066.766054] ath: EEPROM regdomain: 0x8114 [ 9066.766068] ath: EEPROM indicates we should expect a country code [ 9066.766072] ath: doing EEPROM country->regdmn map search [ 9066.766075] ath: country maps to regdmn code: 0x37 [ 9066.766079] ath: Country alpha2 being used: DE [ 9066.766082] ath: Regpair used: 0x37 [ 9066.766153] ieee80211 phy33: Selected rate control algorithm 'minstrel_ht' [ 9066.778141] usb 2-4: Atheros AR9170 is registered as 'phy33' [ 9066.781115] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9067.664758] usbcore: registered new interface driver usbserial_generic [ 9067.664773] usbserial: USB Serial support registered for generic [ 9067.683872] usbcore: registered new interface driver option [ 9067.683889] usbserial: USB Serial support registered for GSM modem (1-port) [ 9073.522595] wlx246511cac39c: authenticate with XXX [ 9073.597121] wlx246511cac39c: send auth to XXX (try 1/3) [ 9073.603121] wlx246511cac39c: authenticated [ 9073.604511] wlx246511cac39c: associate with XXX (try 1/3) [ 9073.609206] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9073.613425] wlx246511cac39c: associated [ 9073.689679] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9073.971730] ieee80211 phy33: rx stream does not start with a first_mpdu frame tag. [ 9073.974837] ieee80211 phy33: rx stream does not start with a first_mpdu frame tag. [ 9086.350608] ieee80211 phy33: channel change: 5620 -> 2437 failed (2). [ 9087.114510] ieee80211 phy33: channel change: 5640 -> 2437 failed (2). [ 9087.882413] ieee80211 phy33: channel change: 5660 -> 2437 failed (2). [ 9088.147928] ieee80211 phy33: channel change: -1 -> 2437 failed (2). [ 9090.270138] ieee80211 phy33: channel change: 5765 -> 2437 failed (2). [ 9093.546733] ieee80211 phy33: channel change: 5230 -> 2437 failed (2). [ 9104.614922] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9171.646451] wlx246511cac39c: authenticate with XXX [ 9171.720970] wlx246511cac39c: send auth to XXX (try 1/3) [ 9171.729323] wlx246511cac39c: authenticated [ 9171.732435] wlx246511cac39c: associate with XXX (try 1/3) [ 9171.737245] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9171.741314] wlx246511cac39c: associated [ 9171.853650] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9207.844472] usb 2-4: no command feedback received (-110). [ 9207.844499] usb 2-4: restart device (6) [ 9208.872502] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 9209.892522] ieee80211 phy33: writing reg 0x1d0104 (val 0x3) failed (-110) [ 9211.942708] usb 2-4: kill pending tx urbs. [ 9214.116482] usb 2-4: firmware upload failed (-110). [ 9214.219184] usb 2-4: Failed to restart device (-110). [ 9214.236749] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236763] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236770] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236775] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236779] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236783] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236787] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236793] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.236797] ieee80211 phy33: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9214.260544] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9214.512522] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9214.836530] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9215.019826] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9215.019857] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9215.425507] ath: EEPROM regdomain: 0x8114 [ 9215.425519] ath: EEPROM indicates we should expect a country code [ 9215.425524] ath: doing EEPROM country->regdmn map search [ 9215.425527] ath: country maps to regdmn code: 0x37 [ 9215.425531] ath: Country alpha2 being used: DE [ 9215.425534] ath: Regpair used: 0x37 [ 9215.425602] ieee80211 phy34: Selected rate control algorithm 'minstrel_ht' [ 9215.439049] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9215.439687] usb 2-4: Atheros AR9170 is registered as 'phy34' [ 9220.489308] wlx246511cac39c: authenticate with XXX [ 9220.564036] wlx246511cac39c: send auth to XXX (try 1/3) [ 9220.569955] wlx246511cac39c: authenticated [ 9220.576533] wlx246511cac39c: associate with XXX (try 1/3) [ 9220.581207] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9220.585315] wlx246511cac39c: associated [ 9220.677619] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9220.978979] net_ratelimit: 29 callbacks suppressed [ 9220.978989] ieee80211 phy34: rx stream does not start with a first_mpdu frame tag. [ 9229.057942] ieee80211 phy34: channel change: 5300 -> 2437 failed (2). [ 9229.323396] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9230.170916] ieee80211 phy34: channel change: 5320 -> 2437 failed (2). [ 9230.437346] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9230.702259] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9231.438773] ieee80211 phy34: channel change: 5745 -> 2437 failed (2). [ 9231.703993] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9231.826689] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9231.969182] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9264.214447] wlx246511cac39c: authenticate with XXX [ 9264.292660] wlx246511cac39c: send auth to XXX (try 1/3) [ 9264.298824] wlx246511cac39c: authenticated [ 9264.300530] wlx246511cac39c: associate with XXX (try 1/3) [ 9264.305340] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9264.309923] wlx246511cac39c: associated [ 9264.390191] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9493.002687] ieee80211 phy34: channel change: 2417 -> 2437 failed (2). [ 9494.318407] ieee80211 phy34: channel change: 2427 -> 2437 failed (2). [ 9494.583697] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9494.848614] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9495.113669] ieee80211 phy34: channel change: -1 -> 2437 failed (2). [ 9495.113696] usb 2-4: restart device (7) [ 9496.335738] usb 2-4: firmware upload failed (-110). [ 9496.431676] usb 2-4: Failed to restart device (-110). [ 9496.452556] ieee80211 phy34: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9496.452579] ieee80211 phy34: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9496.480543] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9496.481117] ieee80211 phy34: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9496.481145] ieee80211 phy34: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9496.696469] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9497.012502] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9497.195822] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9497.195842] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9497.600997] ath: EEPROM regdomain: 0x8114 [ 9497.601011] ath: EEPROM indicates we should expect a country code [ 9497.601015] ath: doing EEPROM country->regdmn map search [ 9497.601018] ath: country maps to regdmn code: 0x37 [ 9497.601022] ath: Country alpha2 being used: DE [ 9497.601026] ath: Regpair used: 0x37 [ 9497.601095] ieee80211 phy35: Selected rate control algorithm 'minstrel_ht' [ 9497.609666] usb 2-4: Atheros AR9170 is registered as 'phy35' [ 9497.611304] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9498.710552] ieee80211 phy35: channel change: 2427 -> 2432 failed (2). [ 9498.975758] ieee80211 phy35: channel change: -1 -> 2432 failed (2). [ 9499.240728] ieee80211 phy35: channel change: -1 -> 2432 failed (2). [ 9499.505653] ieee80211 phy35: channel change: -1 -> 2432 failed (2). [ 9499.505682] usb 2-4: restart device (7) [ 9500.719728] usb 2-4: firmware upload failed (-110). [ 9500.815768] usb 2-4: Failed to restart device (-110). [ 9500.852762] ieee80211 phy35: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9501.068532] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9501.384516] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9501.567781] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9501.567801] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9501.977207] ath: EEPROM regdomain: 0x8114 [ 9501.977221] ath: EEPROM indicates we should expect a country code [ 9501.977226] ath: doing EEPROM country->regdmn map search [ 9501.977228] ath: country maps to regdmn code: 0x37 [ 9501.977232] ath: Country alpha2 being used: DE [ 9501.977236] ath: Regpair used: 0x37 [ 9501.977305] ieee80211 phy36: Selected rate control algorithm 'minstrel_ht' [ 9501.980272] usb 2-4: Atheros AR9170 is registered as 'phy36' [ 9501.990065] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9503.102012] ieee80211 phy36: channel change: 2427 -> 2432 failed (2). [ 9503.589909] ieee80211 phy36: channel change: 2432 -> 2437 failed (2). [ 9503.854913] ieee80211 phy36: channel change: -1 -> 2437 failed (2). [ 9509.619724] wlx246511cac39c: authenticate with XXX [ 9509.694469] wlx246511cac39c: send auth to XXX (try 1/3) [ 9509.697551] wlx246511cac39c: authenticated [ 9509.697906] wlx246511cac39c: waiting for beacon from XXX [ 9510.027221] wlx246511cac39c: authenticate with XXX [ 9510.102529] wlx246511cac39c: send auth to XXX (try 1/3) [ 9510.108528] wlx246511cac39c: authenticated [ 9510.116538] wlx246511cac39c: associate with XXX (try 1/3) [ 9510.121367] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9510.125666] wlx246511cac39c: associated [ 9510.213958] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9532.638646] ieee80211 phy36: channel change: 2442 -> 2437 failed (2). [ 9532.903818] ieee80211 phy36: channel change: -1 -> 2437 failed (2). [ 9533.168892] ieee80211 phy36: channel change: -1 -> 2437 failed (2). [ 9533.433867] ieee80211 phy36: channel change: -1 -> 2437 failed (2). [ 9533.433897] usb 2-4: restart device (7) [ 9534.671773] usb 2-4: firmware upload failed (-110). [ 9534.767737] usb 2-4: Failed to restart device (-110). [ 9534.780596] ieee80211 phy36: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9534.780622] ieee80211 phy36: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9534.804522] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9534.805133] ieee80211 phy36: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9534.805161] ieee80211 phy36: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9535.032505] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9535.352529] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9535.535799] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9535.535810] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9535.945998] ath: EEPROM regdomain: 0x8114 [ 9535.946012] ath: EEPROM indicates we should expect a country code [ 9535.946016] ath: doing EEPROM country->regdmn map search [ 9535.946019] ath: country maps to regdmn code: 0x37 [ 9535.946024] ath: Country alpha2 being used: DE [ 9535.946027] ath: Regpair used: 0x37 [ 9535.946100] ieee80211 phy37: Selected rate control algorithm 'minstrel_ht' [ 9535.955232] usb 2-4: Atheros AR9170 is registered as 'phy37' [ 9535.960748] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9537.261807] ieee80211 phy37: channel change: 2432 -> 2437 failed (2). [ 9537.527018] ieee80211 phy37: channel change: -1 -> 2437 failed (2). [ 9537.791986] ieee80211 phy37: channel change: -1 -> 2437 failed (2). [ 9538.056947] ieee80211 phy37: channel change: -1 -> 2437 failed (2). [ 9538.056975] usb 2-4: restart device (7) [ 9539.279705] usb 2-4: firmware upload failed (-110). [ 9539.375656] usb 2-4: Failed to restart device (-110). [ 9539.416730] ieee80211 phy37: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9539.664524] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9539.980525] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9540.163798] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9540.163819] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9540.571725] ath: EEPROM regdomain: 0x8114 [ 9540.571738] ath: EEPROM indicates we should expect a country code [ 9540.571742] ath: doing EEPROM country->regdmn map search [ 9540.571745] ath: country maps to regdmn code: 0x37 [ 9540.571749] ath: Country alpha2 being used: DE [ 9540.571753] ath: Regpair used: 0x37 [ 9540.571824] ieee80211 phy38: Selected rate control algorithm 'minstrel_ht' [ 9540.577329] usb 2-4: Atheros AR9170 is registered as 'phy38' [ 9540.583388] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9541.690266] ieee80211 phy38: channel change: 2427 -> 2432 failed (2). [ 9541.955681] ieee80211 phy38: channel change: -1 -> 2432 failed (2). [ 9542.220569] ieee80211 phy38: channel change: -1 -> 2432 failed (2). [ 9548.274299] wlx246511cac39c: authenticate with XXX [ 9548.349838] wlx246511cac39c: send auth to XXX (try 1/3) [ 9548.355884] wlx246511cac39c: authenticated [ 9548.356427] wlx246511cac39c: associate with XXX (try 1/3) [ 9548.361265] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9548.365956] wlx246511cac39c: associated [ 9548.434244] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9579.345940] ieee80211 phy38: channel change: 2422 -> 2437 failed (2). [ 9579.611475] ieee80211 phy38: channel change: -1 -> 2437 failed (2). [ 9579.877211] ieee80211 phy38: channel change: -1 -> 2437 failed (2). [ 9580.142152] ieee80211 phy38: channel change: -1 -> 2437 failed (2). [ 9580.142179] usb 2-4: restart device (7) [ 9581.363784] usb 2-4: firmware upload failed (-110). [ 9581.459737] usb 2-4: Failed to restart device (-110). [ 9581.476555] ieee80211 phy38: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9581.476580] ieee80211 phy38: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9581.504517] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9581.505063] ieee80211 phy38: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9581.505094] ieee80211 phy38: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9581.744508] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9582.076472] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9582.259875] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9582.259897] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9582.670042] ath: EEPROM regdomain: 0x8114 [ 9582.670056] ath: EEPROM indicates we should expect a country code [ 9582.670060] ath: doing EEPROM country->regdmn map search [ 9582.670063] ath: country maps to regdmn code: 0x37 [ 9582.670067] ath: Country alpha2 being used: DE [ 9582.670070] ath: Regpair used: 0x37 [ 9582.670140] ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' [ 9582.681014] usb 2-4: Atheros AR9170 is registered as 'phy39' [ 9582.681736] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9583.089715] ieee80211 phy39: channel change: -1 -> 2412 failed (2). [ 9584.410002] ieee80211 phy39: channel change: 2432 -> 2437 failed (2). [ 9584.675202] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9588.859977] wlx246511cac39c: authenticate with XXX [ 9588.934694] wlx246511cac39c: send auth to XXX (try 1/3) [ 9588.940624] wlx246511cac39c: authenticated [ 9588.941019] wlx246511cac39c: associating with AP with corrupt beacon [ 9588.944567] wlx246511cac39c: associate with XXX (try 1/3) [ 9588.949230] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9588.953984] wlx246511cac39c: associated [ 9589.049477] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9647.186712] ieee80211 phy39: channel change: 2412 -> 2437 failed (2). [ 9647.451807] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9647.717151] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9651.250085] ieee80211 phy39: channel change: 2442 -> 2437 failed (2). [ 9651.515337] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9651.780792] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9652.046302] ieee80211 phy39: channel change: -1 -> 2437 failed (2). [ 9652.046331] usb 2-4: restart device (7) [ 9653.263769] usb 2-4: firmware upload failed (-110). [ 9653.358115] usb 2-4: Failed to restart device (-110). [ 9653.388592] ieee80211 phy39: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9653.388621] ieee80211 phy39: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9653.404467] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9653.404813] ieee80211 phy39: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9653.404829] ieee80211 phy39: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9653.628523] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9653.956394] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9654.147465] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9654.147473] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9654.547910] ath: EEPROM regdomain: 0x8114 [ 9654.547924] ath: EEPROM indicates we should expect a country code [ 9654.547928] ath: doing EEPROM country->regdmn map search [ 9654.547932] ath: country maps to regdmn code: 0x37 [ 9654.547936] ath: Country alpha2 being used: DE [ 9654.547939] ath: Regpair used: 0x37 [ 9654.548010] ieee80211 phy40: Selected rate control algorithm 'minstrel_ht' [ 9654.557125] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9654.558318] usb 2-4: Atheros AR9170 is registered as 'phy40' [ 9655.658212] ieee80211 phy40: channel change: 2427 -> 2432 failed (2). [ 9659.918220] wlx246511cac39c: authenticate with XXX [ 9659.992949] wlx246511cac39c: send auth to XXX (try 1/3) [ 9659.999012] wlx246511cac39c: authenticated [ 9660.000772] wlx246511cac39c: associate with XXX (try 1/3) [ 9660.005615] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9660.010321] wlx246511cac39c: associated [ 9660.082504] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9694.383032] ieee80211 phy40: channel change: 2412 -> 2437 failed (2). [ 9694.647962] ieee80211 phy40: channel change: -1 -> 2437 failed (2). [ 9695.886603] ieee80211 phy40: channel change: 2422 -> 2437 failed (2). [ 9696.151818] ieee80211 phy40: channel change: -1 -> 2437 failed (2). [ 9696.417222] ieee80211 phy40: channel change: -1 -> 2437 failed (2). [ 9696.539441] Bluetooth: Core ver 2.22 [ 9696.539492] NET: Registered protocol family 31 [ 9696.539494] Bluetooth: HCI device and connection manager initialized [ 9696.539499] Bluetooth: HCI socket layer initialized [ 9696.539501] Bluetooth: L2CAP socket layer initialized [ 9696.539506] Bluetooth: SCO socket layer initialized [ 9696.683068] ieee80211 phy40: channel change: -1 -> 2437 failed (2). [ 9696.683099] usb 2-4: restart device (7) [ 9697.903691] usb 2-4: firmware upload failed (-110). [ 9697.999605] usb 2-4: Failed to restart device (-110). [ 9698.028605] ieee80211 phy40: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9698.028631] ieee80211 phy40: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9698.048485] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9698.048995] ieee80211 phy40: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9698.049024] ieee80211 phy40: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9698.284434] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9698.608451] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9698.791998] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9698.792021] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9699.195403] ath: EEPROM regdomain: 0x8114 [ 9699.195418] ath: EEPROM indicates we should expect a country code [ 9699.195422] ath: doing EEPROM country->regdmn map search [ 9699.195426] ath: country maps to regdmn code: 0x37 [ 9699.195429] ath: Country alpha2 being used: DE [ 9699.195433] ath: Regpair used: 0x37 [ 9699.195503] ieee80211 phy41: Selected rate control algorithm 'minstrel_ht' [ 9699.198254] usb 2-4: Atheros AR9170 is registered as 'phy41' [ 9699.208220] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9700.329725] ieee80211 phy41: channel change: 2427 -> 2432 failed (2). [ 9700.861652] ieee80211 phy41: channel change: 2432 -> 2437 failed (2). [ 9705.099288] wlx246511cac39c: authenticate with XXX [ 9705.174502] wlx246511cac39c: send auth to XXX (try 1/3) [ 9705.180545] wlx246511cac39c: authenticated [ 9705.184504] wlx246511cac39c: associate with XXX (try 1/3) [ 9705.189300] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9705.193782] wlx246511cac39c: associated [ 9705.285819] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9712.228500] usb 2-4: no command feedback received (-110). [ 9712.228527] usb 2-4: restart device (6) [ 9713.252493] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 9714.276453] ieee80211 phy41: writing reg 0x1d0104 (val 0x3) failed (-110) [ 9716.326739] usb 2-4: kill pending tx urbs. [ 9718.500487] usb 2-4: firmware upload failed (-110). [ 9718.605292] usb 2-4: Failed to restart device (-110). [ 9718.628717] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628750] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628756] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628761] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628765] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628770] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628774] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628778] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.628782] ieee80211 phy41: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9718.648700] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9718.868451] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9719.184525] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9719.367845] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9719.367866] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9719.776622] ath: EEPROM regdomain: 0x8114 [ 9719.776636] ath: EEPROM indicates we should expect a country code [ 9719.776640] ath: doing EEPROM country->regdmn map search [ 9719.776643] ath: country maps to regdmn code: 0x37 [ 9719.776647] ath: Country alpha2 being used: DE [ 9719.776651] ath: Regpair used: 0x37 [ 9719.776723] ieee80211 phy42: Selected rate control algorithm 'minstrel_ht' [ 9719.786330] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9719.787239] usb 2-4: Atheros AR9170 is registered as 'phy42' [ 9724.854601] wlx246511cac39c: authenticate with XXX [ 9724.929976] wlx246511cac39c: send auth to XXX (try 1/3) [ 9724.936487] wlx246511cac39c: authenticated [ 9724.944457] wlx246511cac39c: associate with XXX (try 1/3) [ 9724.949128] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9724.953219] wlx246511cac39c: associated [ 9725.051535] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9728.442454] ieee80211 phy42: channel change: 2427 -> 2437 failed (2). [ 9732.222075] ieee80211 phy42: channel change: 2462 -> 2437 failed (2). [ 9732.487330] ieee80211 phy42: channel change: -1 -> 2437 failed (2). [ 9734.478854] ieee80211 phy42: channel change: 5220 -> 2437 failed (2). [ 9734.744193] ieee80211 phy42: channel change: -1 -> 2437 failed (2). [ 9735.009345] ieee80211 phy42: channel change: -1 -> 2437 failed (2). [ 9735.274975] ieee80211 phy42: channel change: -1 -> 2437 failed (2). [ 9735.275005] usb 2-4: restart device (7) [ 9736.495666] usb 2-4: firmware upload failed (-110). [ 9736.592150] net_ratelimit: 8 callbacks suppressed [ 9736.592158] usb 2-4: Failed to restart device (-110). [ 9736.604770] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604784] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604790] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604795] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604800] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604804] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604808] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604813] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.604817] ieee80211 phy42: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9736.632428] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9736.844400] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9737.160451] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9737.343755] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9737.343777] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9737.750484] ath: EEPROM regdomain: 0x8114 [ 9737.750491] ath: EEPROM indicates we should expect a country code [ 9737.750492] ath: doing EEPROM country->regdmn map search [ 9737.750493] ath: country maps to regdmn code: 0x37 [ 9737.750494] ath: Country alpha2 being used: DE [ 9737.750495] ath: Regpair used: 0x37 [ 9737.750528] ieee80211 phy43: Selected rate control algorithm 'minstrel_ht' [ 9737.752480] usb 2-4: Atheros AR9170 is registered as 'phy43' [ 9737.773710] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9743.050959] wlx246511cac39c: authenticate with XXX [ 9743.125705] wlx246511cac39c: send auth to XXX (try 1/3) [ 9743.131613] wlx246511cac39c: authenticated [ 9743.132452] wlx246511cac39c: associate with XXX (try 1/3) [ 9743.137238] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9743.142092] wlx246511cac39c: associated [ 9743.230292] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9769.636109] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9774.618255] wlx246511cac39c: authenticate with XXX [ 9774.692838] wlx246511cac39c: send auth to XXX (try 1/3) [ 9774.698747] wlx246511cac39c: authenticated [ 9774.700420] wlx246511cac39c: associate with XXX (try 1/3) [ 9774.707350] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9774.711096] wlx246511cac39c: associated [ 9774.782388] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9779.770170] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9783.169725] wlx246511cac39c: authenticate with XXX [ 9783.244775] wlx246511cac39c: send auth to XXX (try 1/3) [ 9783.250847] wlx246511cac39c: authenticated [ 9783.252639] wlx246511cac39c: associate with XXX (try 1/3) [ 9783.257435] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9783.262032] wlx246511cac39c: associated [ 9783.358783] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9785.970539] ieee80211 phy43: channel change: 2422 -> 2437 failed (2). [ 9791.706701] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9797.606238] wlx246511cac39c: authenticate with XXX [ 9797.680926] wlx246511cac39c: send auth to XXX (try 1/3) [ 9797.687037] wlx246511cac39c: authenticated [ 9797.688452] wlx246511cac39c: associate with XXX (try 1/3) [ 9797.693460] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9797.697660] wlx246511cac39c: associated [ 9797.805474] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9816.256696] net_ratelimit: 9 callbacks suppressed [ 9825.679110] ieee80211 phy43: channel change: 2437 -> 2437 failed (2). [ 9825.944992] ieee80211 phy43: channel change: -1 -> 2437 failed (2). [ 9826.209927] ieee80211 phy43: channel change: -1 -> 2437 failed (2). [ 9826.690470] ieee80211 phy43: channel change: 2437 -> 2437 failed (2). [ 9828.454257] ieee80211 phy43: channel change: 2452 -> 2437 failed (2). [ 9831.426083] ieee80211 phy43: channel change: 5220 -> 2437 failed (2). [ 9833.202520] ieee80211 phy43: channel change: 5280 -> 2437 failed (2). [ 9833.467898] ieee80211 phy43: channel change: -1 -> 2437 failed (2). [ 9833.732818] ieee80211 phy43: channel change: -1 -> 2437 failed (2). [ 9833.997847] ieee80211 phy43: channel change: -1 -> 2437 failed (2). [ 9833.997876] usb 2-4: restart device (7) [ 9835.215835] usb 2-4: firmware upload failed (-110). [ 9835.311853] usb 2-4: Failed to restart device (-110). [ 9835.324560] ieee80211 phy43: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9835.324586] ieee80211 phy43: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9835.372506] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9835.373079] ieee80211 phy43: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9835.373110] ieee80211 phy43: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9835.592489] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9835.916394] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9836.107724] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9836.107745] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9836.513422] ath: EEPROM regdomain: 0x8114 [ 9836.513436] ath: EEPROM indicates we should expect a country code [ 9836.513441] ath: doing EEPROM country->regdmn map search [ 9836.513444] ath: country maps to regdmn code: 0x37 [ 9836.513448] ath: Country alpha2 being used: DE [ 9836.513451] ath: Regpair used: 0x37 [ 9836.513520] ieee80211 phy44: Selected rate control algorithm 'minstrel_ht' [ 9836.522395] usb 2-4: Atheros AR9170 is registered as 'phy44' [ 9836.524037] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9837.849794] ieee80211 phy44: channel change: 2432 -> 2437 failed (2). [ 9838.114996] ieee80211 phy44: channel change: -1 -> 2437 failed (2). [ 9838.379965] ieee80211 phy44: channel change: -1 -> 2437 failed (2). [ 9838.644927] ieee80211 phy44: channel change: -1 -> 2437 failed (2). [ 9838.644951] usb 2-4: restart device (7) [ 9839.887706] usb 2-4: firmware upload failed (-110). [ 9839.984405] usb 2-4: Failed to restart device (-110). [ 9840.028748] ieee80211 phy44: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9840.232508] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9840.548514] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9840.731780] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9840.731799] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9841.135727] ath: EEPROM regdomain: 0x8114 [ 9841.135740] ath: EEPROM indicates we should expect a country code [ 9841.135744] ath: doing EEPROM country->regdmn map search [ 9841.135747] ath: country maps to regdmn code: 0x37 [ 9841.135751] ath: Country alpha2 being used: DE [ 9841.135754] ath: Regpair used: 0x37 [ 9841.135821] ieee80211 phy45: Selected rate control algorithm 'minstrel_ht' [ 9841.146123] usb 2-4: Atheros AR9170 is registered as 'phy45' [ 9841.147780] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9842.570069] ieee80211 phy45: channel change: 2432 -> 2437 failed (2). [ 9842.835417] ieee80211 phy45: channel change: -1 -> 2437 failed (2). [ 9843.100258] ieee80211 phy45: channel change: -1 -> 2437 failed (2). [ 9843.365335] ieee80211 phy45: channel change: -1 -> 2437 failed (2). [ 9843.365358] usb 2-4: restart device (7) [ 9844.591738] usb 2-4: firmware upload failed (-110). [ 9844.687692] usb 2-4: Failed to restart device (-110). [ 9844.732521] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732544] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732556] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732566] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732574] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732583] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732591] ieee80211 phy45: writing reg 0x1c36f0 (val 0x5000) failed (-5) [ 9844.732600] ieee80211 phy45: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9844.732608] ieee80211 phy45: writing reg 0x1c36f0 (val 0x2400) failed (-5) [ 9844.960503] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9845.276513] usb 2-4: reset high-speed USB device number 15 using ehci-pci [ 9845.459812] usb 2-4: driver API: 1.9.9 2016-02-15 [1-1] [ 9845.459832] usb 2-4: firmware API: 1.9.6 2012-07-07 [ 9845.864872] ath: EEPROM regdomain: 0x8114 [ 9845.864883] ath: EEPROM indicates we should expect a country code [ 9845.864888] ath: doing EEPROM country->regdmn map search [ 9845.864891] ath: country maps to regdmn code: 0x37 [ 9845.864895] ath: Country alpha2 being used: DE [ 9845.864899] ath: Regpair used: 0x37 [ 9845.864967] ieee80211 phy46: Selected rate control algorithm 'minstrel_ht' [ 9845.872680] usb 2-4: Atheros AR9170 is registered as 'phy46' [ 9845.875509] carl9170 2-4:1.0 wlx246511cac39c: renamed from wlan0 [ 9846.970821] ieee80211 phy46: channel change: 2427 -> 2432 failed (2). [ 9852.866268] wlx246511cac39c: authenticate with XXX [ 9852.941206] wlx246511cac39c: send auth to XXX (try 1/3) [ 9852.947272] wlx246511cac39c: authenticated [ 9852.948481] wlx246511cac39c: associate with XXX (try 1/3) [ 9852.953283] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [ 9852.957481] wlx246511cac39c: associated [ 9853.037739] IPv6: ADDRCONF(NETDEV_CHANGE): wlx246511cac39c: link becomes ready [ 9866.525068] wlx246511cac39c: authenticate with XXX [ 9866.599518] wlx246511cac39c: send auth to XXX (try 1/3) [ 9866.602929] wlx246511cac39c: send auth to XXX (try 2/3) [ 9866.606175] wlx246511cac39c: send auth to XXX (try 3/3) [ 9866.609706] wlx246511cac39c: authentication with XXX timed out [ 9867.425176] wlx246511cac39c: authenticate with XXX [ 9867.501402] wlx246511cac39c: send auth to XXX (try 1/3) [ 9867.507344] wlx246511cac39c: authenticated [ 9867.507693] wlx246511cac39c: waiting for beacon from XXX [ 9867.576451] wlx246511cac39c: associate with XXX (try 1/3) [ 9867.581204] wlx246511cac39c: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [ 9867.585687] wlx246511cac39c: associated [ 9927.534389] ieee80211 phy46: channel change: 5560 -> 2412 failed (2). [ 9936.139733] net_ratelimit: 28 callbacks suppressed [10089.472707] usb 2-4: USB disconnect, device number 15 [10089.500474] wlx246511cac39c: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [10089.500895] ieee80211 phy46: writing reg 0x1c36f0 (val 0x5000) failed (-5) [10089.500926] ieee80211 phy46: writing reg 0x1c36f0 (val 0x5000) failed (-5) [10098.108493] usb 2-4: new high-speed USB device number 16 using ehci-pci [10098.281071] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [10098.281089] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10098.281098] usb 2-4: Product: 802.11 n WLAN [10098.281105] usb 2-4: Manufacturer: Ralink [10098.281111] usb 2-4: SerialNumber: ... [10098.416448] usb 2-4: reset high-speed USB device number 16 using ehci-pci [10098.581980] ieee80211 phy47: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [10098.610196] ieee80211 phy47: rt2x00_set_rf: Info - RF chipset 5372 detected [10098.610474] ieee80211 phy47: Selected rate control algorithm 'minstrel_ht' [10098.672199] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [10098.702315] ieee80211 phy47: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [10098.702379] ieee80211 phy47: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [10191.115368] wlxec22800d3169: authenticate with XXX [10191.136824] wlxec22800d3169: send auth to XXX (try 1/3) [10191.144626] wlxec22800d3169: authenticated [10191.148429] wlxec22800d3169: associate with XXX (try 1/3) [10191.155445] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [10191.164577] wlxec22800d3169: associated [10191.232785] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [10666.162638] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [11374.562390] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [11378.152434] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [11379.572425] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [11380.648421] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [11609.326232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [11609.326242] Bluetooth: BNEP filters: protocol multicast [11609.326251] Bluetooth: BNEP socket layer initialized [12400.568851] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [13237.594255] loop31: detected capacity change from 0 to 19384 [13649.564811] loop32: detected capacity change from 0 to 488424 [13863.382500] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [13863.382619] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [13863.382746] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [13863.382869] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [13863.383019] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [13909.442938] loop8: detected capacity change from 0 to 235496 [13944.357003] loop0: detected capacity change from 0 to 113792 [13970.811262] loop3: detected capacity change from 0 to 129480 [14427.456262] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [14690.998646] loop5: detected capacity change from 0 to 124368 [14746.760281] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [15249.361014] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [15252.591954] wlxec22800d3169: authenticate with XXX [15252.611539] wlxec22800d3169: send auth to XXX (try 1/3) [15253.056653] wlxec22800d3169: authenticated [15253.060296] wlxec22800d3169: associate with XXX (try 1/3) [15253.241104] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [15253.250150] wlxec22800d3169: associated [15253.368540] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [15904.253543] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [15904.369147] wlxec22800d3169: authenticate with XXX [15904.388959] wlxec22800d3169: send auth to XXX (try 1/3) [15904.394745] wlxec22800d3169: authenticated [15904.396175] wlxec22800d3169: associate with XXX (try 1/3) [15904.403732] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [15904.413121] wlxec22800d3169: associated [15906.766611] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [16103.996205] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [16155.600229] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [16157.016243] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [16158.028221] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [16159.584196] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [16228.103808] wlxec22800d3169: authenticate with XXX [16228.138098] wlxec22800d3169: send auth to XXX (try 1/3) [16228.177699] wlxec22800d3169: send auth to XXX (try 2/3) [16228.201441] wlxec22800d3169: send auth to XXX (try 3/3) [16228.242930] wlxec22800d3169: authentication with XXX timed out [34265.997499] wlxec22800d3169: authenticate with XXX [34266.014880] wlxec22800d3169: send auth to XXX (try 1/3) [34266.022776] wlxec22800d3169: authenticated [34266.026711] wlxec22800d3169: associate with XXX (try 1/3) [34266.031074] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [34266.040083] wlxec22800d3169: associated [34266.183753] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [34462.640242] sdb: [34516.619428] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [34516.652376] sdb: [35378.579845] loop33: detected capacity change from 0 to 98272 [35401.423771] loop34: detected capacity change from 0 to 8 [35476.475443] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [35497.420106] loop26: detected capacity change from 0 to 709280 [35597.695853] loop9: detected capacity change from 0 to 357936 [35603.851341] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [35661.607441] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [35661.682889] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [35661.683008] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [35661.683134] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [35661.683258] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [35661.683387] ieee80211 phy47: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [36334.859614] loop10: detected capacity change from 0 to 161712 [37662.938290] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [37671.669329] wlxec22800d3169: authenticate with XXX [37671.688678] wlxec22800d3169: send auth to XXX (try 1/3) [37671.694471] wlxec22800d3169: authenticated [37671.695342] wlxec22800d3169: associate with XXX (try 1/3) [37671.700202] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [37671.709579] wlxec22800d3169: associated [37671.787493] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [37795.754854] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [37796.017716] wlxec22800d3169: authenticate with XXX [37796.038576] wlxec22800d3169: send auth to XXX (try 1/3) [37796.044822] wlxec22800d3169: authenticated [37796.047243] wlxec22800d3169: associate with XXX (try 1/3) [37796.056589] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [37796.065751] wlxec22800d3169: associated [37796.094370] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [37798.500429] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [37798.773170] wlxec22800d3169: authenticate with XXX [37798.792744] wlxec22800d3169: send auth to XXX (try 1/3) [37798.798506] wlxec22800d3169: authenticated [37798.799271] wlxec22800d3169: associate with XXX (try 1/3) [37798.803564] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [37798.812565] wlxec22800d3169: associated [37798.847499] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [37820.419272] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [37821.079275] ieee80211 phy47: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [38217.647128] usb 2-4: USB disconnect, device number 16 [38217.667249] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [38217.991150] usb 2-4: new high-speed USB device number 17 using ehci-pci [38223.307706] usb 2-4: device descriptor read/64, error -110 [38238.919221] usb 2-4: device descriptor read/64, error -110 [38239.159241] usb 2-4: new high-speed USB device number 18 using ehci-pci [38244.295302] usb 2-4: device descriptor read/64, error -110 [38259.911310] usb 2-4: device descriptor read/64, error -110 [38260.019318] usb usb2-port4: attempt power cycle [38260.463285] usb 2-4: new high-speed USB device number 19 using ehci-pci [38265.671675] usb 2-4: device descriptor read/8, error -110 [38271.047762] usb 2-4: device descriptor read/8, error -110 [38271.283284] usb 2-4: new high-speed USB device number 20 using ehci-pci [38274.758510] usb 2-4: device descriptor read/8, error -71 [38274.907969] usb 2-4: device descriptor read/8, error -71 [38275.015314] usb usb2-port4: unable to enumerate USB device [38368.399300] usb 2-4: new high-speed USB device number 21 using ehci-pci [38368.571819] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [38368.571837] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [38368.571846] usb 2-4: Product: 802.11 n WLAN [38368.571853] usb 2-4: Manufacturer: Ralink [38368.571859] usb 2-4: SerialNumber: ... [38368.711301] usb 2-4: reset high-speed USB device number 21 using ehci-pci [38368.876856] ieee80211 phy48: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [38368.905068] ieee80211 phy48: rt2x00_set_rf: Info - RF chipset 5372 detected [38368.905345] ieee80211 phy48: Selected rate control algorithm 'minstrel_ht' [38369.577261] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [38369.819104] ieee80211 phy48: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [38369.838319] ieee80211 phy48: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [38371.390163] wlxec22800d3169: authenticate with XXX [38371.409504] wlxec22800d3169: send auth to XXX (try 1/3) [38371.415887] wlxec22800d3169: authenticated [38371.423263] wlxec22800d3169: associate with XXX (try 1/3) [38371.427575] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [38371.436782] wlxec22800d3169: associated [38371.519559] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [38430.633427] CE: hpet increased min_delta_ns to 20115 nsec [38612.322154] usb 2-4: USB disconnect, device number 21 [38612.347311] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [38612.675302] usb 2-4: new high-speed USB device number 22 using ehci-pci [38612.847999] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [38612.848020] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [38612.848029] usb 2-4: Product: 802.11 n WLAN [38612.848035] usb 2-4: Manufacturer: Ralink [38612.848041] usb 2-4: SerialNumber: ... [38612.983284] usb 2-4: reset high-speed USB device number 22 using ehci-pci [38613.148787] ieee80211 phy49: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [38613.176996] ieee80211 phy49: rt2x00_set_rf: Info - RF chipset 5372 detected [38613.177275] ieee80211 phy49: Selected rate control algorithm 'minstrel_ht' [38613.234095] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [38613.263114] ieee80211 phy49: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [38613.264184] ieee80211 phy49: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [38614.814137] wlxec22800d3169: authenticate with XXX [38614.833477] wlxec22800d3169: send auth to XXX (try 1/3) [38614.857563] wlxec22800d3169: authenticated [38614.859380] wlxec22800d3169: associate with XXX (try 1/3) [38614.877057] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [38614.886201] wlxec22800d3169: associated [38614.987566] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [38673.301387] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [38674.828567] wlxec22800d3169: authenticate with XXX [38674.848288] wlxec22800d3169: send auth to XXX (try 1/3) [38674.853994] wlxec22800d3169: authenticated [38674.855232] wlxec22800d3169: associate with XXX (try 1/3) [38674.859458] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [38674.868413] wlxec22800d3169: associated [38674.939472] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [38906.662257] usb 2-4: USB disconnect, device number 22 [38906.687343] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [38907.091286] usb 2-4: new high-speed USB device number 23 using ehci-pci [38907.263879] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [38907.263897] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [38907.263907] usb 2-4: Product: 802.11 n WLAN [38907.263913] usb 2-4: Manufacturer: Ralink [38907.263918] usb 2-4: SerialNumber: ... [38907.403251] usb 2-4: reset high-speed USB device number 23 using ehci-pci [38907.568793] ieee80211 phy50: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [38907.597128] ieee80211 phy50: rt2x00_set_rf: Info - RF chipset 5372 detected [38907.597405] ieee80211 phy50: Selected rate control algorithm 'minstrel_ht' [38907.646692] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [38907.674015] ieee80211 phy50: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [38907.674069] ieee80211 phy50: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [38912.217294] wlxec22800d3169: authenticate with XXX [38912.236678] wlxec22800d3169: send auth to XXX (try 1/3) [38912.270456] wlxec22800d3169: authenticated [38912.271269] wlxec22800d3169: associate with XXX (try 1/3) [38912.303650] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [38912.312949] wlxec22800d3169: associated [38914.383556] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [38943.199426] usb 2-4: USB disconnect, device number 23 [38943.227296] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [38943.567290] usb 2-4: new high-speed USB device number 24 using ehci-pci [38943.739886] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [38943.739906] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [38943.739915] usb 2-4: Product: 802.11 n WLAN [38943.739922] usb 2-4: Manufacturer: Ralink [38943.739928] usb 2-4: SerialNumber: ... [38943.875283] usb 2-4: reset high-speed USB device number 24 using ehci-pci [38944.040801] ieee80211 phy51: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [38944.069012] ieee80211 phy51: rt2x00_set_rf: Info - RF chipset 5372 detected [38944.069290] ieee80211 phy51: Selected rate control algorithm 'minstrel_ht' [38944.123540] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [38944.165276] ieee80211 phy51: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [38944.165347] ieee80211 phy51: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [38945.705807] wlxec22800d3169: authenticate with XXX [38945.725434] wlxec22800d3169: send auth to XXX (try 1/3) [38945.732696] wlxec22800d3169: authenticated [38945.735313] wlxec22800d3169: associate with XXX (try 1/3) [38945.753167] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [38945.762582] wlxec22800d3169: associated [38945.843544] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [39015.983341] usb 2-4: USB disconnect, device number 24 [39016.003345] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [39016.327213] usb 2-4: new high-speed USB device number 25 using ehci-pci [39016.499932] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [39016.499954] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [39016.499963] usb 2-4: Product: 802.11 n WLAN [39016.499971] usb 2-4: Manufacturer: Ralink [39016.499976] usb 2-4: SerialNumber: ... [39016.635285] usb 2-4: reset high-speed USB device number 25 using ehci-pci [39016.808555] ieee80211 phy52: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [39016.836804] ieee80211 phy52: rt2x00_set_rf: Info - RF chipset 5372 detected [39016.837079] ieee80211 phy52: Selected rate control algorithm 'minstrel_ht' [39016.895796] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [39016.932660] ieee80211 phy52: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [39016.932726] ieee80211 phy52: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [39018.501494] wlxec22800d3169: authenticate with XXX [39018.520712] wlxec22800d3169: send auth to XXX (try 1/3) [39018.528740] wlxec22800d3169: authenticated [39018.531288] wlxec22800d3169: associate with XXX (try 1/3) [39018.540978] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [39018.549978] wlxec22800d3169: associated [39020.627587] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [41980.386853] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 13 in queue 0 [41980.966170] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [41980.966289] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [41980.966413] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [42075.883425] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [42125.122604] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [42302.365731] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [42930.406657] r8169 0000:05:00.0 enp5s0: Link is Down [42933.378050] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [42934.050433] r8169 0000:05:00.0 enp5s0: Link is Down [42937.807274] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [42945.107759] r8169 0000:05:00.0 enp5s0: Link is Down [42948.951594] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [43135.228965] r8169 0000:05:00.0 enp5s0: Link is Down [43603.010879] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [44370.611484] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [44370.698115] wlxec22800d3169: authenticate with XXX [44370.717437] wlxec22800d3169: send auth to XXX (try 1/3) [44370.723230] wlxec22800d3169: authenticated [44370.725081] wlxec22800d3169: associate with XXX (try 1/3) [44370.729415] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [44370.738603] wlxec22800d3169: associated [45943.595392] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [45956.778853] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [45956.778970] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [45956.779095] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [45956.779220] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [45959.167389] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [45959.707041] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 14 in queue 0 [45971.501792] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [45972.413924] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [45972.414043] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [46024.319378] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46277.146335] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 13 in queue 0 [46277.181657] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [46277.181777] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [46277.181903] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [46285.223361] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46306.731391] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [46320.791394] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46322.283391] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46323.348600] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [46323.348719] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [46323.348846] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [46371.551406] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46405.193022] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 10 in queue 2 [46414.791421] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46432.946110] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46432.946228] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46432.946352] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46432.946477] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46432.946601] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46432.946727] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [46505.795451] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46507.691452] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46508.351450] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46676.729280] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [46708.323526] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [46717.095532] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [46782.095035] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [46792.031565] wlxec22800d3169: authenticate with XXX [46792.052080] wlxec22800d3169: send auth to XXX (try 1/3) [46792.058152] wlxec22800d3169: authenticated [46792.059524] wlxec22800d3169: associate with XXX (try 1/3) [46792.063796] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [46792.072899] wlxec22800d3169: associated [46792.147795] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [46819.172647] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [46821.582872] wlxec22800d3169: authenticate with XXX [46821.616741] wlxec22800d3169: send auth to XXX (try 1/3) [46821.622559] wlxec22800d3169: authenticated [46821.627481] wlxec22800d3169: associate with XXX (try 1/3) [46821.631849] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [46821.640760] wlxec22800d3169: associated [46823.731882] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [47115.526253] wlxec22800d3169: authenticate with XXX [47115.547107] wlxec22800d3169: send auth to XXX (try 1/3) [47115.591024] wlxec22800d3169: send auth to XXX (try 2/3) [47115.621648] wlxec22800d3169: send auth to XXX (try 3/3) [47115.665149] wlxec22800d3169: authentication with XXX timed out [47459.524072] wlxec22800d3169: authenticate with XXX [47459.541276] wlxec22800d3169: send auth to XXX (try 1/3) [47459.547025] wlxec22800d3169: authenticated [47459.547777] wlxec22800d3169: associate with XXX (try 1/3) [47459.552002] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [47459.561732] wlxec22800d3169: associated [47459.644133] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [47483.423012] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [47485.915421] wlxec22800d3169: authenticate with XXX [47485.934960] wlxec22800d3169: send auth to XXX (try 1/3) [47485.941977] wlxec22800d3169: authenticated [47485.947795] wlxec22800d3169: associate with XXX (try 1/3) [47485.952125] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [47485.961106] wlxec22800d3169: associated [47486.032131] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [47617.199932] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47746.417043] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [47766.919964] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47767.520014] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47767.831530] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [47782.215948] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47782.820011] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47783.420002] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47785.319972] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47785.931947] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47786.516603] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [47786.516722] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [47797.760017] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47798.428021] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47799.428015] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47800.088010] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47809.428025] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47822.808035] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47823.408030] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47824.068021] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47824.864002] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 13 in queue 0 [47824.864121] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 13 in queue 0 [47826.268040] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47836.292011] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47837.604041] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47838.203988] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47839.156033] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47839.824034] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47840.535955] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 10 in queue 2 [47840.536082] ieee80211 phy52: rt2800_txdone: Warning - Data pending for entry 10 in queue 2 [47841.015992] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [47842.912036] ieee80211 phy52: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [47966.173148] rt2800usb_tx_sta_fifo_read_completed: 3 callbacks suppressed [47966.173227] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.183481] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.192866] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.202613] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.222489] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.233205] usb 2-4: USB disconnect, device number 25 [47966.234286] ieee80211 phy52: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1130 with error -19 [47966.244860] ieee80211 phy52: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [47966.312146] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [47966.392307] ------------[ cut here ]------------ [47966.392314] Have pending ack frames! [47966.392366] WARNING: CPU: 5 PID: 115245 at net/mac80211/main.c:1416 ieee80211_free_ack_frame+0x38/0x50 [mac80211] [47966.392438] Modules linked in: xt_LOG nf_log_syslog xt_recent xt_hl ip6t_rt xt_limit xt_addrtype ip6t_REJECT nf_reject_ipv6 xt_nat binfmt_misc dummy bnep nfnetlink bluetooth ecdh_generic ecc option usb_wwan usbserial carl9170 ath ccm rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 libarc4 xt_MASQUERADE xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bpfilter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq kvm_amd snd_seq_device ccp snd_timer snd kvm soundcore k10temp mac_hid efi_pstore sch_fq_codel iptable_filter ip6table_filter [47966.392509] ip6_tables br_netfilter bridge stp llc arp_tables ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp parport ip_tables x_tables autofs4 amdgpu iommu_v2 gpu_sched radeon uas usb_storage i2c_algo_bit drm_ttm_helper hid_generic ttm pata_acpi usbhid hid drm_kms_helper syscopyarea sysfillrect sysimgblt r8169 realtek fb_sys_fops cec pata_atiixp rc_core xhci_pci ahci i2c_piix4 drm xhci_pci_renesas libahci [47966.392543] CPU: 5 PID: 115245 Comm: kworker/5:1 Tainted: G W OE 5.13.0-52-generic #59~20.04.1-Ubuntu [47966.392546] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS L1.81 10/02/2013 [47966.392548] Workqueue: usb_hub_wq hub_event [47966.392554] RIP: 0010:ieee80211_free_ack_frame+0x38/0x50 [mac80211] [47966.392589] Code: 89 e5 41 54 49 89 f4 74 0e 4c 89 e7 e8 61 a1 c4 d8 31 c0 41 5c 5d c3 48 c7 c7 de 49 40 c1 c6 05 72 cd 0b 00 01 e8 02 d2 e3 d8 <0f> 0b 4c 89 e7 e8 3e a1 c4 d8 31 c0 41 5c 5d c3 0f 1f 84 00 00 00 [47966.392592] RSP: 0018:ffffbae5c5e87a68 EFLAGS: 00010286 [47966.392594] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 [47966.392596] RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9b91bbca0988 [47966.392598] RBP: ffffbae5c5e87a70 R08: ffff9b91bbca0980 R09: ffffbae5c5e87840 [47966.392599] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9b90dfa39100 [47966.392600] R13: 0000000080000000 R14: 0000000000000000 R15: ffff9b91027f4030 [47966.392602] FS: 0000000000000000(0000) GS:ffff9b91bbc80000(0000) knlGS:0000000000000000 [47966.392604] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [47966.392605] CR2: 00000000012ad908 CR3: 0000000105a0a000 CR4: 00000000000006e0 [47966.392607] Call Trace: [47966.392609] <TASK> [47966.392611] ? ieee80211_free_hw+0xa0/0xa0 [mac80211] [47966.392647] idr_for_each+0x60/0xd0 [47966.392651] ? rt2x00usb_free_reg+0x47/0x60 [rt2x00usb] [47966.392656] ieee80211_free_hw+0x35/0xa0 [mac80211] [47966.392691] rt2x00usb_disconnect+0x35/0x60 [rt2x00usb] [47966.392695] usb_unbind_interface+0x8c/0x260 [47966.392701] device_release_driver_internal+0x103/0x1f0 [47966.392705] device_release_driver+0x12/0x20 [47966.392708] bus_remove_device+0xe1/0x150 [47966.392710] device_del+0x192/0x3f0 [47966.392713] ? usb_remove_ep_devs+0x1f/0x30 [47966.392719] usb_disable_device+0x95/0x1c0 [47966.392722] usb_disconnect+0xc0/0x270 [47966.392727] hub_port_connect+0x89/0x8c0 [47966.392729] port_event+0x56c/0x840 [47966.392731] ? get_cpu_idle_time+0x4b/0xf0 [47966.392735] hub_event+0x157/0x3b0 [47966.392738] process_one_work+0x220/0x3c0 [47966.392742] worker_thread+0x4d/0x3f0 [47966.392744] ? process_one_work+0x3c0/0x3c0 [47966.392747] kthread+0x12b/0x150 [47966.392749] ? set_kthread_struct+0x40/0x40 [47966.392752] ret_from_fork+0x22/0x30 [47966.392756] </TASK> [47966.392757] ---[ end trace 9dcaecbd077cb812 ]--- [47966.664130] usb 2-4: new high-speed USB device number 26 using ehci-pci [47966.836850] usb 2-4: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [47966.836869] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [47966.836879] usb 2-4: Product: 802.11 n WLAN [47966.836886] usb 2-4: Manufacturer: Ralink [47966.836892] usb 2-4: SerialNumber: ... [47966.972113] usb 2-4: reset high-speed USB device number 26 using ehci-pci [47967.137627] ieee80211 phy53: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [47967.166001] ieee80211 phy53: rt2x00_set_rf: Info - RF chipset 5372 detected [47967.166249] ieee80211 phy53: Selected rate control algorithm 'minstrel_ht' [47967.221769] rt2800usb 2-4:1.0 wlxec22800d3169: renamed from wlan0 [47967.256035] ieee80211 phy53: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [47967.256105] ieee80211 phy53: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [47968.816431] wlxec22800d3169: authenticate with XXX [47968.835574] wlxec22800d3169: send auth to XXX (try 1/3) [47969.000894] wlxec22800d3169: authenticated [47969.004047] wlxec22800d3169: associate with XXX (try 1/3) [47969.043258] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [47969.052762] wlxec22800d3169: associated [47969.136392] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [48056.596088] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48076.460086] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48092.460118] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48124.124135] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48124.788141] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48124.894821] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 1 in queue 2 [48124.896336] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [48125.680119] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48131.166924] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167043] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167168] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167294] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167418] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167544] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167667] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167792] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.167918] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48131.168109] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [48156.572175] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [48313.800222] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48466.942649] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [48694.388373] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [48695.340348] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [48716.643736] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [48813.403951] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [49074.968546] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49083.748598] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49084.348601] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [49142.652588] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49143.320609] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49143.373061] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [49143.373181] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [49162.216642] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49178.172637] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [49178.835321] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [49178.835439] ieee80211 phy53: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [49248.516686] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [50230.293032] ieee80211 phy53: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [50235.095707] wlxec22800d3169: authenticate with XXX [50235.116635] wlxec22800d3169: send auth to XXX (try 1/3) [50235.151837] wlxec22800d3169: send auth to XXX (try 2/3) [50235.186990] wlxec22800d3169: send auth to XXX (try 3/3) [50235.218334] wlxec22800d3169: authentication with XXX timed out [50375.200281] wlxec22800d3169: authenticate with XXX [50375.217916] wlxec22800d3169: send auth to XXX (try 1/3) [50375.253372] wlxec22800d3169: authenticated [50375.257139] wlxec22800d3169: associate with XXX (try 1/3) [50375.262793] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [50375.272043] wlxec22800d3169: associated [50375.353530] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [50391.678182] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [50426.561154] wlxec22800d3169: authenticate with XXX [50426.580572] wlxec22800d3169: send auth to XXX (try 1/3) [50426.611469] wlxec22800d3169: authenticated [50426.617156] wlxec22800d3169: associate with XXX (try 1/3) [50426.624341] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [50426.633350] wlxec22800d3169: associated [50428.721438] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [50648.912161] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [50697.155602] wlxec22800d3169: authenticate with XXX [50697.190392] wlxec22800d3169: send auth to XXX (try 1/3) [50697.196318] wlxec22800d3169: authenticated [50697.197272] wlxec22800d3169: associate with XXX (try 1/3) [50697.204589] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [50697.213768] wlxec22800d3169: associated [50697.289579] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [50816.788285] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [50827.064452] wlxec22800d3169: authenticate with XXX [50827.155221] wlxec22800d3169: send auth to XXX (try 1/3) [50827.161059] wlxec22800d3169: authenticated [50827.165337] wlxec22800d3169: associate with XXX (try 1/3) [50827.179619] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [50827.188665] wlxec22800d3169: associated [50827.253635] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [50890.975290] usb 2-4: USB disconnect, device number 26 [50890.989420] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [50895.033437] usb 2-5: new high-speed USB device number 27 using ehci-pci [50895.206164] usb 2-5: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [50895.206184] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [50895.206193] usb 2-5: Product: 802.11 n WLAN [50895.206200] usb 2-5: Manufacturer: Ralink [50895.206206] usb 2-5: SerialNumber: ... [50895.345444] usb 2-5: reset high-speed USB device number 27 using ehci-pci [50895.510949] ieee80211 phy54: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [50895.539160] ieee80211 phy54: rt2x00_set_rf: Info - RF chipset 5372 detected [50895.539439] ieee80211 phy54: Selected rate control algorithm 'minstrel_ht' [50895.594501] rt2800usb 2-5:1.0 wlxec22800d3169: renamed from wlan0 [50895.632164] ieee80211 phy54: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [50895.632230] ieee80211 phy54: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [50905.145452] wlxec22800d3169: authenticate with XXX [50905.180712] wlxec22800d3169: send auth to XXX (try 1/3) [50905.186390] wlxec22800d3169: authenticated [50905.189341] wlxec22800d3169: associate with XXX (try 1/3) [50905.193549] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [50905.202477] wlxec22800d3169: associated [50905.277714] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [50937.058936] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [50964.852259] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [50964.852380] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [50964.852504] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [50970.317405] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [50971.653441] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [50972.317387] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [50972.444834] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [50972.444952] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [50972.445077] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [50985.381474] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [50997.965479] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51018.209482] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51019.944982] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 10 in queue 2 [51024.021484] usb 2-4: new high-speed USB device number 28 using ehci-pci [51024.178339] usb 2-4: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [51024.178359] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51024.178369] usb 2-4: Product: Cruzer Blade [51024.178376] usb 2-4: Manufacturer: SanDisk [51024.178382] usb 2-4: SerialNumber: ... [51024.178944] usb-storage 2-4:1.0: USB Mass Storage device detected [51024.179552] scsi host7: usb-storage 2-4:1.0 [51025.190676] scsi 7:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [51025.197026] sd 7:0:0:0: Attached scsi generic sg6 type 0 [51025.199181] sd 7:0:0:0: [sdg] 122585088 512-byte logical blocks: (62.8 GB/58.5 GiB) [51025.200765] sd 7:0:0:0: [sdg] Write Protect is off [51025.200779] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00 [51025.201903] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [51025.240389] sdg: sdg1 sdg2 [51025.264404] sd 7:0:0:0: [sdg] Attached SCSI removable disk [51026.355668] exfat: Deprecated parameter 'namecase' [51073.444141] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [51113.005464] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51256.653562] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51257.321574] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51257.430875] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [51257.430994] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [51257.431119] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [51257.431245] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [51268.049578] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51274.797561] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [51276.941596] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [52301.452405] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [52334.092891] wlxec22800d3169: authenticate with XXX [52334.127183] wlxec22800d3169: send auth to XXX (try 1/3) [52334.174011] wlxec22800d3169: send auth to XXX (try 2/3) [52334.203269] wlxec22800d3169: send auth to XXX (try 3/3) [52334.241129] wlxec22800d3169: authentication with XXX timed out [52353.346102] wlxec22800d3169: authenticate with XXX [52353.437942] wlxec22800d3169: send auth to XXX (try 1/3) [52353.471130] wlxec22800d3169: authenticated [52353.474057] wlxec22800d3169: associate with XXX (try 1/3) [52353.480632] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=4) [52353.489740] wlxec22800d3169: associated [52353.570599] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [52438.906578] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [52466.776448] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [52466.791413] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [52568.050887] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [52573.842409] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [52573.857635] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [52573.873032] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [52612.012778] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [52623.006041] wlxec22800d3169: authenticate with XXX [52623.040315] wlxec22800d3169: send auth to XXX (try 1/3) [52623.066980] wlxec22800d3169: authenticated [52623.074174] wlxec22800d3169: associate with XXX (try 1/3) [52623.107019] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [52623.116255] wlxec22800d3169: associated [52623.214510] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [52632.456838] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [53406.714552] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [53407.330558] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53407.930575] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [53408.538575] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53409.434586] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [53409.976137] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [53409.976256] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [53409.976383] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [53409.976505] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [53409.976629] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [53410.038562] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53412.654517] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53413.322582] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53439.358543] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [53439.966596] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [53552.722427] r8169 0000:05:00.0 enp5s0: Link is Down [53555.648274] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [53651.451587] r8169 0000:05:00.0 enp5s0: Link is Down [53655.129325] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [53695.266541] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [53700.978301] wlxec22800d3169: authenticate with XXX [53701.013792] wlxec22800d3169: send auth to XXX (try 1/3) [53701.044651] wlxec22800d3169: authenticated [53701.046679] wlxec22800d3169: associate with XXX (try 1/3) [53701.220072] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [53701.229272] wlxec22800d3169: associated [53701.303050] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [54173.154895] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [54239.830950] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [55170.262782] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [55170.380506] wlxec22800d3169: authenticate with XXX [55170.400380] wlxec22800d3169: send auth to XXX (try 1/3) [55170.406168] wlxec22800d3169: authenticated [55170.407459] wlxec22800d3169: associate with XXX (try 1/3) [55170.411811] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [55170.420783] wlxec22800d3169: associated [56004.307732] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56004.364527] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [56005.743730] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56006.647746] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56043.571779] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56044.171776] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56045.011794] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56045.264470] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 14 in queue 0 [56047.411750] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56048.019799] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56048.927740] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56049.539799] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56049.640724] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 14 in queue 0 [56050.451820] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56051.059741] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56051.536203] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 1 in queue 2 [56051.671732] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56052.283747] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56053.199757] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56053.815728] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56054.483766] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56055.387751] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [56055.991791] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [56064.970098] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [56073.594480] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 0 [56073.594501] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 0 [56084.478815] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [56281.672005] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [56307.754637] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [56307.856901] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [56369.822679] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [62306.101302] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [62311.173769] wlxec22800d3169: authenticate with XXX [62311.208083] wlxec22800d3169: send auth to XXX (try 1/3) [62311.214923] wlxec22800d3169: authenticated [62311.222698] wlxec22800d3169: associate with XXX (try 1/3) [62311.230759] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [62311.239723] wlxec22800d3169: associated [62311.326872] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [62320.271158] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [62320.387659] wlxec22800d3169: authenticate with XXX [62320.407891] wlxec22800d3169: send auth to XXX (try 1/3) [62320.413726] wlxec22800d3169: authenticated [62320.414599] wlxec22800d3169: associate with XXX (try 1/3) [62320.418856] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [62320.427824] wlxec22800d3169: associated [62339.196513] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [62339.196635] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [62339.196760] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [62339.197384] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [62520.627011] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [62535.289271] wlxec22800d3169: authenticate with XXX [62535.309181] wlxec22800d3169: send auth to XXX (try 1/3) [62535.315551] wlxec22800d3169: authenticated [62535.318781] wlxec22800d3169: associate with XXX (try 1/3) [62535.324381] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [62535.333400] wlxec22800d3169: associated [62535.415058] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [62540.729446] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [62543.044763] wlxec22800d3169: authenticate with XXX [62543.080904] wlxec22800d3169: send auth to XXX (try 1/3) [62543.086615] wlxec22800d3169: authenticated [62543.090737] wlxec22800d3169: associate with XXX (try 1/3) [62543.095063] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [62543.104043] wlxec22800d3169: associated [62543.187042] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [62682.254779] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [62682.862796] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [62703.825624] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [62855.502310] wlxec22800d3169: authenticate with XXX [62855.521524] wlxec22800d3169: send auth to XXX (try 1/3) [62857.358883] wlxec22800d3169: send auth to XXX (try 2/3) [62857.364678] wlxec22800d3169: authenticated [62857.366849] wlxec22800d3169: associate with XXX (try 1/3) [62857.373131] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [62857.382225] wlxec22800d3169: associated [62857.455091] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [62879.903234] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [62902.147473] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 11 in queue 2 [62902.147594] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 11 in queue 2 [63054.592976] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [63064.554520] wlxec22800d3169: authenticate with XXX [63064.587460] wlxec22800d3169: send auth to XXX (try 1/3) [63064.590143] wlxec22800d3169: authenticated [63064.591057] wlxec22800d3169: associate with XXX (try 1/3) [63064.602087] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [63064.611223] wlxec22800d3169: associated [63064.748263] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [63071.993998] wlxec22800d3169: authenticate with XXX [63072.027494] wlxec22800d3169: send auth to XXX (try 1/3) [63072.034370] wlxec22800d3169: authenticated [63072.039020] wlxec22800d3169: associate with XXX (try 1/3) [63072.059085] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [63072.068066] wlxec22800d3169: associated [63079.140552] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [63084.014271] wlxec22800d3169: authenticate with XXX [63084.048816] wlxec22800d3169: send auth to XXX (try 1/3) [63084.051623] wlxec22800d3169: authenticated [63084.054918] wlxec22800d3169: associate with XXX (try 1/3) [63084.061603] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [63084.070574] wlxec22800d3169: associated [63084.212492] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [63091.213473] wlxec22800d3169: authenticate with XXX [63091.249637] wlxec22800d3169: send auth to XXX (try 1/3) [63091.257023] wlxec22800d3169: authenticated [63091.258947] wlxec22800d3169: associate with XXX (try 1/3) [63093.086490] wlxec22800d3169: associate with XXX (try 2/3) [63093.147128] wlxec22800d3169: associate with XXX (try 3/3) [63094.994767] wlxec22800d3169: association with XXX timed out [63104.759103] wlxec22800d3169: authenticate with XXX [63104.792006] wlxec22800d3169: send auth to XXX (try 1/3) [63104.802136] wlxec22800d3169: authenticated [63104.806815] wlxec22800d3169: associate with XXX (try 1/3) [63106.627691] wlxec22800d3169: associate with XXX (try 2/3) [63106.635907] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [63106.644924] wlxec22800d3169: associated [63114.018306] wlxec22800d3169: authenticate with XXX [63114.053315] wlxec22800d3169: send auth to XXX (try 1/3) [63114.069367] wlxec22800d3169: authenticated [63114.074940] wlxec22800d3169: associate with XXX (try 1/3) [63114.088730] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [63114.097757] wlxec22800d3169: associated [63121.030525] wlxec22800d3169: authenticate with XXX [63121.064753] wlxec22800d3169: send auth to XXX (try 1/3) [63122.894437] wlxec22800d3169: send auth to XXX (try 2/3) [63122.898389] wlxec22800d3169: authenticated [63122.898924] wlxec22800d3169: associate with XXX (try 1/3) [63123.364224] wlxec22800d3169: aborting association with XXX by local choice (Reason: 3=DEAUTH_LEAVING) [63126.258358] wlxec22800d3169: authenticate with XXX [63126.275746] wlxec22800d3169: send auth to XXX (try 1/3) [63126.281501] wlxec22800d3169: authenticated [63126.282992] wlxec22800d3169: associate with XXX (try 1/3) [63126.287320] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [63126.296508] wlxec22800d3169: associated [63126.359310] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [63198.249377] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [63199.237090] wlxec22800d3169: authenticate with XXX [63199.273712] wlxec22800d3169: send auth to XXX (try 1/3) [63199.301597] wlxec22800d3169: authenticated [63199.303225] wlxec22800d3169: associate with XXX (try 1/3) [63201.095685] wlxec22800d3169: associate with XXX (try 2/3) [63201.100829] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [63201.110291] wlxec22800d3169: associated [63201.271387] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [63204.491552] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [63207.259525] wlxec22800d3169: authenticate with XXX [63207.300462] wlxec22800d3169: send auth to XXX (try 1/3) [63207.307757] wlxec22800d3169: authenticated [63207.311056] wlxec22800d3169: associate with XXX (try 1/3) [63207.315296] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [63207.324404] wlxec22800d3169: associated [63207.395259] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [63745.302446] usb 2-4: USB disconnect, device number 28 [63745.319259] blk_update_request: I/O error, dev sdg, sector 42679400 op 0x1:(WRITE) flags 0x104000 phys_seg 24 prio class 0 [63745.319336] blk_update_request: I/O error, dev sdg, sector 42679640 op 0x1:(WRITE) flags 0x104000 phys_seg 30 prio class 0 [63745.319382] blk_update_request: I/O error, dev sdg, sector 42679880 op 0x1:(WRITE) flags 0x104000 phys_seg 30 prio class 0 [63745.319403] blk_update_request: I/O error, dev sdg, sector 42680120 op 0x1:(WRITE) flags 0x104000 phys_seg 30 prio class 0 [63745.319422] blk_update_request: I/O error, dev sdg, sector 42680360 op 0x1:(WRITE) flags 0x104000 phys_seg 29 prio class 0 [63745.319439] blk_update_request: I/O error, dev sdg, sector 42680600 op 0x1:(WRITE) flags 0x104000 phys_seg 29 prio class 0 [63745.319456] blk_update_request: I/O error, dev sdg, sector 42680840 op 0x1:(WRITE) flags 0x104000 phys_seg 30 prio class 0 [63745.319473] blk_update_request: I/O error, dev sdg, sector 42681080 op 0x1:(WRITE) flags 0x104000 phys_seg 29 prio class 0 [63745.319870] blk_update_request: I/O error, dev sdg, sector 42681320 op 0x1:(WRITE) flags 0x100000 phys_seg 25 prio class 0 [63745.320030] blk_update_request: I/O error, dev sdg, sector 42681520 op 0x1:(WRITE) flags 0x4000 phys_seg 30 prio class 0 [63745.406555] Buffer I/O error on dev sdg1, logical block 0, lost async page write [63794.007064] r8169 0000:05:00.0 enp5s0: Link is Down [63796.972178] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [63899.486834] r8169 0000:05:00.0 enp5s0: Link is Down [63913.835582] r8169 0000:05:00.0 enp5s0: Link is Up - 100Mbps/Full - flow control rx/tx [64263.389036] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [64311.339335] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [64311.702706] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [64312.722819] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [64521.264524] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [65143.764282] wlxec22800d3169: disconnect from AP XXX for new auth to XXX [65143.845795] wlxec22800d3169: authenticate with XXX [65143.865337] wlxec22800d3169: send auth to XXX (try 1/3) [65143.869867] wlxec22800d3169: authenticated [65143.871923] wlxec22800d3169: associate with XXX (try 1/3) [65143.884695] wlxec22800d3169: RX ReassocResp from XXX (capab=0x1431 status=0 aid=2) [65143.893633] wlxec22800d3169: associated [65154.666391] wlxec22800d3169: authenticate with XXX [65154.687386] wlxec22800d3169: send auth to XXX (try 1/3) [65154.695133] wlxec22800d3169: authenticated [65154.695908] wlxec22800d3169: associate with XXX (try 1/3) [65154.717295] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [65154.726296] wlxec22800d3169: associated [65166.820282] wlxec22800d3169: disconnect from AP XXX for new auth to XXX [65166.933959] wlxec22800d3169: authenticate with XXX [65166.953521] wlxec22800d3169: send auth to XXX (try 1/3) [65167.002368] wlxec22800d3169: send auth to XXX (try 2/3) [65167.039360] wlxec22800d3169: send auth to XXX (try 3/3) [65167.091484] wlxec22800d3169: authentication with XXX timed out [65167.258716] wlxec22800d3169: authenticate with XXX [65167.277279] wlxec22800d3169: send auth to XXX (try 1/3) [65167.286873] wlxec22800d3169: authenticated [65167.287883] wlxec22800d3169: associate with XXX (try 1/3) [65167.292557] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [65167.301756] wlxec22800d3169: associated [65968.749277] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [65968.764321] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [65968.869298] wlxec22800d3169: authenticate with XXX [65968.889035] wlxec22800d3169: send auth to XXX (try 1/3) [65968.894794] wlxec22800d3169: authenticated [65968.896292] wlxec22800d3169: associate with XXX (try 1/3) [65968.900750] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [65968.909950] wlxec22800d3169: associated [65969.269441] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [66314.744341] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [66423.749392] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [67786.345158] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67786.945093] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67816.109184] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67817.001160] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [67819.973173] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67820.573174] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67855.509189] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67856.109192] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67868.741202] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67869.016393] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 0 [67869.016530] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 0 [67869.341199] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67870.233196] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67870.833197] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67871.678201] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 0 in queue 0 [67871.725205] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67873.329188] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67873.929226] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67874.021820] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 10 in queue 0 [67900.100709] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [67919.581204] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67921.229235] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [67921.304842] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 4 in queue 0 [67928.689216] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68570.625518] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68571.821520] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68572.421515] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68573.021113] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 0 [68674.741565] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68675.199282] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 2 in queue 0 [68676.173569] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68683.815100] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 8 in queue 0 [68684.289415] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 0 [68687.833568] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68688.725561] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68688.974587] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 10 in queue 0 [68696.553576] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68697.603158] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 0 [68697.625583] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68698.637576] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68699.237574] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [68699.348059] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 13 in queue 0 [68700.951364] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 3 in queue 0 [68700.961554] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [69966.562237] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [70041.422599] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [70076.586196] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [70077.186222] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [70077.803985] ieee80211 phy54: rt2800_txdone: Warning - Data pending for entry 7 in queue 0 [70078.002188] ieee80211 phy54: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [70932.838350] wlxec22800d3169: authenticate with XXX [70932.872069] wlxec22800d3169: send auth to XXX (try 1/3) [70932.913911] wlxec22800d3169: send auth to XXX (try 2/3) [70932.961013] wlxec22800d3169: send auth to XXX (try 3/3) [70933.000018] wlxec22800d3169: authentication with XXX timed out [71396.492157] usb 2-5: USB disconnect, device number 27 [71405.922819] usb 2-5: new high-speed USB device number 29 using ehci-pci [71406.094811] usb 2-5: New USB device found, idVendor=07d1, idProduct=3c0a, bcdDevice= 1.01 [71406.094829] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [71406.094838] usb 2-5: Product: 11n Adapter [71406.094845] usb 2-5: Manufacturer: Ralink [71406.094851] usb 2-5: SerialNumber: ... [71406.230829] usb 2-5: reset high-speed USB device number 29 using ehci-pci [71406.396260] ieee80211 phy55: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected [71406.424470] ieee80211 phy55: rt2x00_set_rf: Info - RF chipset 0008 detected [71406.424747] ieee80211 phy55: Selected rate control algorithm 'minstrel_ht' [71406.866043] rt2800usb 2-5:1.0 wlxbcf68501fef3: renamed from wlan0 [71407.172665] ieee80211 phy55: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [71407.188240] ieee80211 phy55: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [71479.051545] wlxbcf68501fef3: authenticate with XXX [71479.075524] wlxbcf68501fef3: send auth to XXX (try 1/3) [71479.081364] wlxbcf68501fef3: authenticated [71479.082837] wlxbcf68501fef3: associate with XXX (try 1/3) [71479.092121] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [71479.101163] wlxbcf68501fef3: associated [71481.175154] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [71582.935100] wlxbcf68501fef3: disconnect from AP XXX for new auth to XXX [71583.085018] wlxbcf68501fef3: authenticate with XXX [71583.108957] wlxbcf68501fef3: send auth to XXX (try 1/3) [71583.918868] wlxbcf68501fef3: send auth to XXX (try 2/3) [71584.878886] wlxbcf68501fef3: send auth to XXX (try 3/3) [71585.903071] wlxbcf68501fef3: authentication with XXX timed out [71587.165554] wlxbcf68501fef3: authenticate with XXX [71587.209601] wlxbcf68501fef3: send auth to XXX (try 1/3) [71587.252244] wlxbcf68501fef3: authenticated [71587.254905] wlxbcf68501fef3: associate with XXX (try 1/3) [71587.271980] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [71587.281228] wlxbcf68501fef3: associated [71597.610842] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [71599.302913] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [71599.906933] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [71600.417361] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 1 in queue 2 [71601.114846] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [71606.830919] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [71614.652757] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [71622.107117] wlxbcf68501fef3: authenticate with XXX [71622.131429] wlxbcf68501fef3: send auth to XXX (try 1/3) [71622.150152] wlxbcf68501fef3: authenticated [71622.154854] wlxbcf68501fef3: associate with XXX (try 1/3) [71622.198425] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [71622.207805] wlxbcf68501fef3: associated [71622.303231] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [71689.638898] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [71695.518926] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [71696.634384] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [71696.634499] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [74640.374881] loop34: detected capacity change from 0 to 234441648 [74640.451711] loop34: p1 [74641.116596] loop35: detected capacity change from 0 to 234441648 [74641.136652] loop35: p1 [74642.416649] loop36: detected capacity change from 0 to 234441648 [74642.440595] loop36: p1 [74651.900659] loop37: detected capacity change from 0 to 234441648 [74651.925299] loop37: p1 [74879.734717] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [74886.586421] wlxbcf68501fef3: authenticate with XXX [74886.634429] wlxbcf68501fef3: send auth to XXX (try 1/3) [74886.640153] wlxbcf68501fef3: authenticated [74886.648344] wlxbcf68501fef3: associate with XXX (try 1/3) [74886.652585] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [74886.661915] wlxbcf68501fef3: associated [74886.748675] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [75511.060698] usb 2-4: new high-speed USB device number 30 using ehci-pci [75511.218792] usb 2-4: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.02 [75511.218812] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [75511.218821] usb 2-4: Product: iPhone [75511.218828] usb 2-4: Manufacturer: Apple Inc. [75511.218834] usb 2-4: SerialNumber: ... [75512.523169] usbcore: registered new device driver apple-mfi-fastcharge [75513.337188] usbcore: registered new interface driver ipheth [75609.423450] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [75609.423568] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [75609.423694] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [76334.653063] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76335.481007] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76336.097057] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76336.381039] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381082] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381201] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381325] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381448] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381573] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76336.381698] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76337.057003] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76338.045058] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76342.629079] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76344.025046] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76401.925114] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76402.953095] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76403.613115] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76404.517059] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76405.117018] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76405.961019] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76406.502579] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [76406.502694] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [76406.502819] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [76406.502944] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 14 in queue 2 [76406.584184] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [76407.177060] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76408.745059] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76411.753176] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [76421.053063] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76421.653055] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76422.261031] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76423.165059] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76423.825124] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76424.725087] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76425.329130] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76425.620723] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [76425.640842] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [76425.640962] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [76426.301064] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76426.537355] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [76426.540363] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 1 in queue 2 [76426.540482] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 1 in queue 2 [76433.361041] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76434.025081] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76434.815589] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [76434.815709] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [76434.815836] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 0 in queue 2 [76439.025114] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76440.001056] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76467.157855] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76467.157976] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76467.158100] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76467.158225] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76484.933131] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76490.653095] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76511.893157] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76512.557119] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76513.461113] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76513.583891] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76513.584012] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76519.170810] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76519.612302] wlxbcf68501fef3: authenticate with XXX [76519.636445] wlxbcf68501fef3: send auth to XXX (try 1/3) [76520.481563] wlxbcf68501fef3: aborting authentication with XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76520.638794] wlxbcf68501fef3: authenticate with XXX [76520.662886] wlxbcf68501fef3: send auth to XXX (try 1/3) [76521.046335] wlxbcf68501fef3: authenticated [76521.053093] wlxbcf68501fef3: associate with XXX (try 1/3) [76521.064388] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [76521.073476] wlxbcf68501fef3: associated [76523.169289] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [76531.181070] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76531.845154] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76532.809127] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76533.473149] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76533.582052] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [76537.269083] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76537.873163] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76546.297177] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76546.649109] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [76570.993124] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76571.661138] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76582.238216] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76584.005117] wlxbcf68501fef3: authenticate with XXX [76584.032705] wlxbcf68501fef3: send auth to XXX (try 1/3) [76584.071803] wlxbcf68501fef3: authenticated [76584.077147] wlxbcf68501fef3: associate with XXX (try 1/3) [76584.105815] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [76584.114976] wlxbcf68501fef3: associated [76584.181276] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [76589.809164] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76593.722276] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76593.722394] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [76602.625809] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [76602.625956] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [76602.626053] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [76602.626176] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [76612.686513] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76612.950845] wlxbcf68501fef3: authenticate with XXX [76612.975208] wlxbcf68501fef3: send auth to XXX (try 1/3) [76612.981159] wlxbcf68501fef3: authenticated [76612.985197] wlxbcf68501fef3: associate with XXX (try 1/3) [76612.994511] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [76613.003785] wlxbcf68501fef3: associated [76613.034301] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [76631.109173] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76631.769194] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76633.569213] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76634.233147] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76651.893192] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76652.553168] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76653.593184] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76654.269207] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76655.585159] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76656.209181] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76656.821175] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76657.445174] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76658.273156] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76658.877262] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76659.477188] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76660.089245] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76660.923870] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [76660.923991] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [76660.924115] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [76660.924240] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [76660.924365] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [76661.009217] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76669.000036] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76669.619805] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 7 in queue 0 [76671.001154] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76671.613250] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76672.225236] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76714.994606] wlxbcf68501fef3: authenticate with XXX [76715.019898] wlxbcf68501fef3: send auth to XXX (try 1/3) [76715.025619] wlxbcf68501fef3: authenticated [76715.029254] wlxbcf68501fef3: associate with XXX (try 1/3) [76715.035745] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [76715.044719] wlxbcf68501fef3: associated [76715.109477] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [76733.181239] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 0 [76746.537215] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76748.749178] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76749.421180] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76751.669395] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [76752.028444] wlxbcf68501fef3: authenticate with XXX [76752.055443] wlxbcf68501fef3: send auth to XXX (try 1/3) [76752.885232] wlxbcf68501fef3: send auth to XXX (try 2/3) [76753.873268] wlxbcf68501fef3: send auth to XXX (try 3/3) [76754.865560] wlxbcf68501fef3: authentication with XXX timed out [76755.520850] wlxbcf68501fef3: authenticate with XXX [76755.543659] wlxbcf68501fef3: send auth to XXX (try 1/3) [76756.913268] wlxbcf68501fef3: send auth to XXX (try 2/3) [76757.545541] wlxbcf68501fef3: send auth to XXX (try 3/3) [76758.869213] wlxbcf68501fef3: authentication with XXX timed out [76760.315969] wlxbcf68501fef3: authenticate with XXX [76760.356121] wlxbcf68501fef3: send auth to XXX (try 1/3) [76760.669822] wlxbcf68501fef3: authenticated [76760.673341] wlxbcf68501fef3: associate with XXX (try 1/3) [76760.716704] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [76760.725867] wlxbcf68501fef3: associated [76760.821503] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [76771.300670] wlxbcf68501fef3: disassociated from XXX (Reason: 1=UNSPECIFIED) [76772.843886] wlxbcf68501fef3: authenticate with XXX [76772.887149] wlxbcf68501fef3: send auth to XXX (try 1/3) [76772.891500] wlxbcf68501fef3: authenticated [76772.893164] wlxbcf68501fef3: associate with XXX (try 1/3) [76772.903995] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [76772.913095] wlxbcf68501fef3: associated [76778.685543] wlxbcf68501fef3: disconnect from AP XXX for new auth to XXX [76778.839407] wlxbcf68501fef3: authenticate with XXX [76778.862462] wlxbcf68501fef3: send auth to XXX (try 1/3) [76778.954313] wlxbcf68501fef3: authenticated [76778.957236] wlxbcf68501fef3: associate with XXX (try 1/3) [76778.961682] wlxbcf68501fef3: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [76778.970597] wlxbcf68501fef3: associated [76929.288768] apple-mfi-fastcharge 2-4: USB disconnect, device number 30 [76944.589364] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76945.189341] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76946.489306] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76955.585339] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76978.845342] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76979.761310] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [76980.685347] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [76981.289319] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77014.699332] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [77014.699450] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [77014.699576] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 4 in queue 2 [77034.329369] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77063.661928] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [77181.178710] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [77181.178827] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [77181.178952] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 13 in queue 2 [77270.458093] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [77270.458209] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [77270.458334] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [77270.458458] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [77270.485211] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [77270.485330] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [77270.485507] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 3 in queue 2 [77303.625491] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [77305.885497] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77311.441486] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77312.101452] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77450.918494] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [77453.404643] wlxbcf68501fef3: authenticate with XXX [77453.448498] wlxbcf68501fef3: send auth to XXX (try 1/3) [77453.454344] wlxbcf68501fef3: authenticated [77453.461527] wlxbcf68501fef3: associate with XXX (try 1/3) [77453.465928] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [77453.475189] wlxbcf68501fef3: associated [77453.553847] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [77517.769039] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [77517.769134] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [77587.297626] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77628.429591] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77634.005634] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77634.665667] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77689.593695] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77690.193676] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [77699.645673] ieee80211 phy55: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [77709.092749] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [77709.855896] ieee80211 phy55: rt2800_txdone: Warning - Data pending for entry 9 in queue 0 [77711.855714] wlxbcf68501fef3: authenticate with XXX [77711.878732] wlxbcf68501fef3: send auth to XXX (try 1/3) [77712.910051] wlxbcf68501fef3: authenticated [77712.917695] wlxbcf68501fef3: associate with XXX (try 1/3) [77712.923220] wlxbcf68501fef3: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [77712.932238] wlxbcf68501fef3: associated [77712.999234] IPv6: ADDRCONF(NETDEV_CHANGE): wlxbcf68501fef3: link becomes ready [77721.017530] wlxbcf68501fef3: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [77756.571165] wlxbcf68501fef3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [77770.866955] usb 2-5: USB disconnect, device number 29 [77772.645687] usb 2-5: new high-speed USB device number 31 using ehci-pci [77772.822087] usb 2-5: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [77772.822105] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77772.822116] usb 2-5: Product: 802.11 n WLAN [77772.822123] usb 2-5: Manufacturer: Ralink [77772.822129] usb 2-5: SerialNumber: ... [77772.957730] usb 2-5: reset high-speed USB device number 31 using ehci-pci [77773.123150] ieee80211 phy56: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [77773.151495] ieee80211 phy56: rt2x00_set_rf: Info - RF chipset 5372 detected [77773.151771] ieee80211 phy56: Selected rate control algorithm 'minstrel_ht' [77773.977804] rt2800usb 2-5:1.0 wlxec22800d3169: renamed from wlan0 [77774.220100] ieee80211 phy56: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [77774.240516] ieee80211 phy56: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [77881.729695] wlxec22800d3169: authenticate with XXX [77881.749701] wlxec22800d3169: send auth to XXX (try 1/3) [77881.755431] wlxec22800d3169: authenticated [77881.757747] wlxec22800d3169: associate with XXX (try 1/3) [77881.762057] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [77881.771011] wlxec22800d3169: associated [77883.873973] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [77903.210488] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 7 in queue 2 [77907.497893] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [77957.005783] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [78047.225845] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [78111.786569] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [78112.081620] wlxec22800d3169: authenticate with XXX [78112.104087] wlxec22800d3169: send auth to XXX (try 1/3) [78112.109844] wlxec22800d3169: authenticated [78112.113818] wlxec22800d3169: associate with XXX (try 1/3) [78112.123130] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [78112.132541] wlxec22800d3169: associated [78112.191517] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [78116.148177] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [78126.062571] wlxec22800d3169: authenticate with XXX [78126.081623] wlxec22800d3169: send auth to XXX (try 1/3) [78126.097875] wlxec22800d3169: authenticated [78126.101840] wlxec22800d3169: associate with XXX (try 1/3) [78126.108337] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [78126.117302] wlxec22800d3169: associated [78126.186000] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [78158.312780] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [78160.673246] wlxec22800d3169: authenticate with XXX [78160.707290] wlxec22800d3169: send auth to XXX (try 1/3) [78160.712978] wlxec22800d3169: authenticated [78160.714244] wlxec22800d3169: associate with XXX (try 1/3) [78160.720779] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [78160.729816] wlxec22800d3169: associated [78160.802088] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [78163.763278] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [78168.482833] wlxec22800d3169: authenticate with XXX [78168.575664] wlxec22800d3169: send auth to XXX (try 1/3) [78168.582277] wlxec22800d3169: authenticated [78168.585871] wlxec22800d3169: associate with XXX (try 1/3) [78168.590957] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [78168.599942] wlxec22800d3169: associated [78168.670219] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [78240.836812] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 5 in queue 2 [78241.850435] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [78241.850553] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [78241.850678] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [78241.850803] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 12 in queue 2 [78242.945959] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [78243.068784] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [78243.068899] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [78243.549910] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [78244.985889] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [78246.877437] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [78246.877554] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [78246.877679] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [78246.877804] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [78246.877942] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 9 in queue 2 [78247.022672] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [78247.022791] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 15 in queue 2 [78257.291169] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 8 in queue 2 [78454.512324] r8169 0000:05:00.0 enp5s0: Link is Down [78528.271165] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [78564.374133] r8169 0000:05:00.0 enp5s0: Link is Down [78566.725898] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [78567.755790] r8169 0000:05:00.0 enp5s0: Link is Down [78570.887629] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [79200.667704] r8169 0000:05:00.0 enp5s0: Link is Down [79205.509363] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [79207.032589] r8169 0000:05:00.0 enp5s0: Link is Down [79211.497797] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [79219.917116] r8169 0000:05:00.0 enp5s0: Link is Down [79225.649487] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [79271.704355] r8169 0000:05:00.0 enp5s0: Link is Down [79274.189468] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [79275.067310] r8169 0000:05:00.0 enp5s0: Link is Down [79277.775593] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [81978.603445] wlxec22800d3169: authenticate with XXX [81978.623399] wlxec22800d3169: send auth to XXX (try 1/3) [81978.656252] wlxec22800d3169: send auth to XXX (try 2/3) [81978.682616] wlxec22800d3169: send auth to XXX (try 3/3) [81978.723487] wlxec22800d3169: authentication with XXX timed out [82008.179868] wlxec22800d3169: authenticate with XXX [82008.212250] wlxec22800d3169: send auth to XXX (try 1/3) [82008.217949] wlxec22800d3169: authenticated [82008.220194] wlxec22800d3169: associate with XXX (try 1/3) [82008.226559] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [82008.235641] wlxec22800d3169: associated [82008.303760] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [82908.718684] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 2 in queue 2 [83047.181647] ieee80211 phy56: rt2800_txdone: Warning - Data pending for entry 6 in queue 2 [83096.080149] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [83096.760135] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [83098.140139] ieee80211 phy56: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [83851.068996] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [83864.563330] wlxec22800d3169: authenticate with XXX [83864.597979] wlxec22800d3169: send auth to XXX (try 1/3) [83864.612091] wlxec22800d3169: authenticated [83864.612414] wlxec22800d3169: associate with XXX (try 1/3) [83864.616642] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [83864.625735] wlxec22800d3169: associated [83864.704792] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [87570.792672] wlxec22800d3169: disassociated from XXX (Reason: 1=UNSPECIFIED) [87571.017737] wlxec22800d3169: authenticate with XXX [87571.038255] wlxec22800d3169: send auth to XXX (try 1/3) [87571.065676] wlxec22800d3169: authenticated [87571.066956] wlxec22800d3169: associate with XXX (try 1/3) [87571.072650] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [87571.081700] wlxec22800d3169: associated [87584.832101] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [87584.846254] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [87590.090968] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [87590.167745] wlxec22800d3169: authenticate with XXX [87590.187135] wlxec22800d3169: send auth to XXX (try 1/3) [87590.294870] wlxec22800d3169: send auth to XXX (try 2/3) [87590.406892] wlxec22800d3169: send auth to XXX (try 3/3) [87590.510872] wlxec22800d3169: authentication with XXX timed out [87597.265698] wlxec22800d3169: authenticate with XXX [87597.300223] wlxec22800d3169: send auth to XXX (try 1/3) [87597.410418] wlxec22800d3169: send auth to XXX (try 2/3) [87597.421810] wlxec22800d3169: authenticated [87597.426880] wlxec22800d3169: associate with XXX (try 1/3) [87597.435755] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [87597.444847] wlxec22800d3169: associated [92423.862809] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [92424.002792] wlxec22800d3169: authenticate with XXX [92424.023832] wlxec22800d3169: send auth to XXX (try 1/3) [92424.029816] wlxec22800d3169: authenticated [92424.037494] wlxec22800d3169: associate with XXX (try 1/3) [92424.042682] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [92424.052164] wlxec22800d3169: associated [92784.386492] r8169 0000:05:00.0 enp5s0: Link is Down [93877.864215] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [93883.914050] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [93894.888356] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [93904.946561] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [93904.990763] wlxec22800d3169: authenticate with XXX [93905.015543] wlxec22800d3169: send auth to XXX (try 1/3) [93905.021231] wlxec22800d3169: authenticated [93905.023351] wlxec22800d3169: associate with XXX (try 1/3) [93905.028529] wlxec22800d3169: RX AssocResp from XXX (capab=0x31 status=0 aid=1) [93905.037834] wlxec22800d3169: associated [93910.052507] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [93921.928193] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [93922.027980] wlxec22800d3169: authenticate with XXX [93922.047778] wlxec22800d3169: send auth to XXX (try 1/3) [93922.054667] wlxec22800d3169: authenticated [93922.055491] wlxec22800d3169: associate with XXX (try 1/3) [93922.059939] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [93922.068865] wlxec22800d3169: associated [94068.566996] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [94071.759242] wlxec22800d3169: authenticate with XXX [94071.794870] wlxec22800d3169: send auth to XXX (try 1/3) [94071.800779] wlxec22800d3169: authenticated [94071.808749] wlxec22800d3169: associate with XXX (try 1/3) [94071.813470] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [94071.822548] wlxec22800d3169: associated [94071.892966] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [94122.939012] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [94167.840589] r8169 0000:05:00.0 enp5s0: Link is Down [94176.695752] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [94178.247793] r8169 0000:05:00.0 enp5s0: Link is Down [94183.031323] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [94198.585057] r8169 0000:05:00.0 enp5s0: Link is Down [94203.118906] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [94227.474961] wlxec22800d3169: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [94238.040717] wlxec22800d3169: authenticate with XXX [94238.061276] wlxec22800d3169: send auth to XXX (try 1/3) [94238.166290] wlxec22800d3169: send auth to XXX (try 2/3) [94238.172301] wlxec22800d3169: authenticated [94238.174304] wlxec22800d3169: associate with XXX (try 1/3) [94238.180801] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=3) [94238.189820] wlxec22800d3169: associated [94238.282487] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec22800d3169: link becomes ready [94249.614412] r8169 0000:05:00.0 enp5s0: Link is Down [94255.279645] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [94446.876454] wlxec22800d3169: disconnect from AP XXX for new auth to XXX [94446.973518] wlxec22800d3169: authenticate with XXX [94446.992987] wlxec22800d3169: send auth to XXX (try 1/3) [94446.998924] wlxec22800d3169: authenticated [94447.004039] wlxec22800d3169: associate with XXX (try 1/3) [94447.018304] wlxec22800d3169: RX ReassocResp from XXX (capab=0x1431 status=0 aid=2) [94447.027609] wlxec22800d3169: associated [94447.088099] wlxec22800d3169: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [94452.456331] wlxec22800d3169: disconnect from AP XXX for new auth to XXX [94452.549231] wlxec22800d3169: authenticate with XXX [94452.568853] wlxec22800d3169: send auth to XXX (try 1/3) [94452.578023] wlxec22800d3169: authenticated [94452.580018] wlxec22800d3169: associate with XXX (try 1/3) [94452.590318] wlxec22800d3169: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [94452.599416] wlxec22800d3169: associated [94746.503634] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [94752.361405] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [94755.618864] wlxec22800d3169: AP XXX changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [94765.856505] wlxec22800d3169: deauthenticated from XXX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [94765.931205] wlxec22800d3169: authenticate with XXX [94765.950156] wlxec22800d3169: send auth to XXX (try 1/3) [94765.955960] wlxec22800d3169: authenticated [94765.961838] wlxec22800d3169: associate with XXX (try 1/3) [94765.966170] wlxec22800d3169: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [94765.975112] wlxec22800d3169: associated [94770.366613] wlxec22800d3169: authenticate with XXX [94770.400846] wlxec22800d3169: send auth to XXX (try 1/3) [94770.404228] wlxec22800d3169: authenticated [94770.406789] wlxec22800d3169: associate with XXX (try 1/3) [94770.412781] wlxec22800d3169: RX AssocResp from XXX (capab=0x1431 status=0 aid=2) [94770.424551] wlxec22800d3169: associated [94770.452243] wlxec22800d3169: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [94779.479308] wlxec22800d3169: disconnect from AP XXX for new auth to XXX [94779.588970] wlxec22800d3169: authenticate with XXX [94779.608652] wlxec22800d3169: send auth to XXX (try 1/3) [94779.614314] wlxec22800d3169: authenticated [94779.617208] wlxec22800d3169: associate with XXX (try 1/3) [94779.621558] wlxec22800d3169: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [94779.631164] wlxec22800d3169: associated [95159.884973] r8169 0000:05:00.0 enp5s0: Link is Down [95172.864140] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx