[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 5.16.18-200.fc35.x86_64 (XXX@XXX) (gcc (GCC) 11.2.1 20220127 (Red Hat 11.2.1-9), GNU ld version 2.37-10.fc35) #1 SMP PREEMPT Mon Mar 28 14:10:07 UTC 2022 [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt5)/vmlinuz-5.16.18-200.fc35.x86_64 root=/dev/mapper/XXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd234fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd235000-0x00000000bd23bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd23c000-0x00000000bd699fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd69a000-0x00000000bdad2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdad3000-0x00000000dda92fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dda93000-0x00000000ddca0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddca1000-0x00000000ddcc0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ddcc1000-0x00000000de1e9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de1ea000-0x00000000deffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000061effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xbcc5f018-0xbcc6f057] usable ==> usable [ 0.000000] e820: update [mem 0xbcc5f018-0xbcc6f057] usable ==> usable [ 0.000000] e820: update [mem 0xbcc51018-0xbcc5e857] usable ==> usable [ 0.000000] e820: update [mem 0xbcc51018-0xbcc5e857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bcc51017] usable [ 0.000000] reserve setup_data: [mem 0x00000000bcc51018-0x00000000bcc5e857] usable [ 0.000000] reserve setup_data: [mem 0x00000000bcc5e858-0x00000000bcc5f017] usable [ 0.000000] reserve setup_data: [mem 0x00000000bcc5f018-0x00000000bcc6f057] usable [ 0.000000] reserve setup_data: [mem 0x00000000bcc6f058-0x00000000bd234fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bd235000-0x00000000bd23bfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bd23c000-0x00000000bd699fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bd69a000-0x00000000bdad2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bdad3000-0x00000000dda92fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dda93000-0x00000000ddca0fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ddca1000-0x00000000ddcc0fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ddcc1000-0x00000000de1e9fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000de1ea000-0x00000000deffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000061effffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xdef5b898 ACPI 2.0=0xddca7000 ACPI=0xddca7000 SMBIOS=0xf04d0 MOKvar=0xdbb83000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUS All Series/H97-PLUS, BIOS 2103 06/27/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3600.221 MHz processor [ 0.000506] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000509] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000514] last_pfn = 0x61f000 max_arch_pfn = 0x400000000 [ 0.000585] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001054] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001059] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.006575] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.006585] esrt: Reserving ESRT space from 0x00000000def5b898 to 0x00000000def5b8d0. [ 0.006591] e820: update [mem 0xdbb83000-0xdbb83fff] usable ==> reserved [ 0.006615] Using GB pages for direct mapping [ 0.006929] secureboot: Secure boot disabled [ 0.006929] RAMDISK: [mem 0x5cee0000-0x6003efff] [ 0.006933] ACPI: Early table checksum verification disabled [ 0.006935] ACPI: RSDP 0x00000000DDCA7000 000024 (v02 ALASKA) [ 0.006938] ACPI: XSDT 0x00000000DDCA7080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006943] ACPI: FACP 0x00000000DDCB8918 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.006946] ACPI: DSDT 0x00000000DDCA7198 01177F (v02 ALASKA A M I 00000006 INTL 20120711) [ 0.006949] ACPI: FACS 0x00000000DE1E9F80 000040 [ 0.006951] ACPI: APIC 0x00000000DDCB8A28 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.006953] ACPI: FPDT 0x00000000DDCB8AC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006955] ACPI: SSDT 0x00000000DDCB8B08 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711) [ 0.006957] ACPI: SSDT 0x00000000DDCB96F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.006960] ACPI: SSDT 0x00000000DDCB9C38 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117) [ 0.006962] ACPI: MCFG 0x00000000DDCBA7B0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.006964] ACPI: HPET 0x00000000DDCBA7F0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.006966] ACPI: SSDT 0x00000000DDCBA828 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.006968] ACPI: SSDT 0x00000000DDCBAB98 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711) [ 0.006970] ACPI: BGRT 0x00000000DDCC0750 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006972] ACPI: Reserving FACP table memory at [mem 0xddcb8918-0xddcb8a23] [ 0.006973] ACPI: Reserving DSDT table memory at [mem 0xddca7198-0xddcb8916] [ 0.006974] ACPI: Reserving FACS table memory at [mem 0xde1e9f80-0xde1e9fbf] [ 0.006975] ACPI: Reserving APIC table memory at [mem 0xddcb8a28-0xddcb8ab9] [ 0.006976] ACPI: Reserving FPDT table memory at [mem 0xddcb8ac0-0xddcb8b03] [ 0.006977] ACPI: Reserving SSDT table memory at [mem 0xddcb8b08-0xddcb96f5] [ 0.006978] ACPI: Reserving SSDT table memory at [mem 0xddcb96f8-0xddcb9c30] [ 0.006979] ACPI: Reserving SSDT table memory at [mem 0xddcb9c38-0xddcba7ab] [ 0.006979] ACPI: Reserving MCFG table memory at [mem 0xddcba7b0-0xddcba7eb] [ 0.006980] ACPI: Reserving HPET table memory at [mem 0xddcba7f0-0xddcba827] [ 0.006981] ACPI: Reserving SSDT table memory at [mem 0xddcba828-0xddcbab94] [ 0.006982] ACPI: Reserving SSDT table memory at [mem 0xddcbab98-0xddcc06f5] [ 0.006983] ACPI: Reserving BGRT table memory at [mem 0xddcc0750-0xddcc0787] [ 0.007025] No NUMA configuration found [ 0.007026] Faking a node at [mem 0x0000000000000000-0x000000061effffff] [ 0.007034] NODE_DATA(0) allocated [mem 0x61efd5000-0x61effffff] [ 0.044196] Zone ranges: [ 0.044198] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.044200] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.044201] Normal [mem 0x0000000100000000-0x000000061effffff] [ 0.044202] Device empty [ 0.044203] Movable zone start for each node [ 0.044205] Early memory node ranges [ 0.044206] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.044207] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.044208] node 0: [mem 0x0000000000100000-0x00000000bd234fff] [ 0.044209] node 0: [mem 0x00000000bd23c000-0x00000000bd699fff] [ 0.044209] node 0: [mem 0x00000000bdad3000-0x00000000dda92fff] [ 0.044210] node 0: [mem 0x00000000defff000-0x00000000deffffff] [ 0.044211] node 0: [mem 0x0000000100000000-0x000000061effffff] [ 0.044213] Initmem setup node 0 [mem 0x0000000000001000-0x000000061effffff] [ 0.044217] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.044219] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.044244] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.048732] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.049517] On node 0, zone DMA32: 1081 pages in unavailable ranges [ 0.049560] On node 0, zone DMA32: 5484 pages in unavailable ranges [ 0.080907] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.080940] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.081013] ACPI: PM-Timer IO Port: 0x1808 [ 0.081019] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.081028] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.081030] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.081032] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.081034] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.081035] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.081039] efi_bgrt: Ignoring BGRT: invalid image address [ 0.081040] TSC deadline timer available [ 0.081041] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.081062] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.081064] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.081065] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.081066] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.081068] PM: hibernation: Registered nosave memory: [mem 0xbcc51000-0xbcc51fff] [ 0.081069] PM: hibernation: Registered nosave memory: [mem 0xbcc5e000-0xbcc5efff] [ 0.081070] PM: hibernation: Registered nosave memory: [mem 0xbcc5f000-0xbcc5ffff] [ 0.081071] PM: hibernation: Registered nosave memory: [mem 0xbcc6f000-0xbcc6ffff] [ 0.081073] PM: hibernation: Registered nosave memory: [mem 0xbd235000-0xbd23bfff] [ 0.081075] PM: hibernation: Registered nosave memory: [mem 0xbd69a000-0xbdad2fff] [ 0.081076] PM: hibernation: Registered nosave memory: [mem 0xdbb83000-0xdbb83fff] [ 0.081078] PM: hibernation: Registered nosave memory: [mem 0xdda93000-0xddca0fff] [ 0.081078] PM: hibernation: Registered nosave memory: [mem 0xddca1000-0xddcc0fff] [ 0.081079] PM: hibernation: Registered nosave memory: [mem 0xddcc1000-0xde1e9fff] [ 0.081079] PM: hibernation: Registered nosave memory: [mem 0xde1ea000-0xdeffefff] [ 0.081081] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.081081] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.081082] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.081083] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.081083] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.081084] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.081084] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.081085] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.081085] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.081086] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.081087] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.081087] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.081089] [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.081090] Booting paravirtualized kernel on bare hardware [ 0.081092] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.085254] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.085432] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.085438] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.085440] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.085469] Fallback order for Node 0: 0 [ 0.085472] Built 1 zonelists, mobility grouping on. Total pages: 6178362 [ 0.085473] Policy zone: Normal [ 0.085474] Kernel command line: BOOT_IMAGE=(hd0,gpt5)/vmlinuz-5.16.18-200.fc35.x86_64 root=/dev/mapper/XXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.085540] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt5)/vmlinuz-5.16.18-200.fc35.x86_64", will be passed to user space. [ 0.086843] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.087512] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.087577] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.147207] Memory: 24260192K/25106372K available (16394K kernel code, 3571K rwdata, 10680K rodata, 2684K init, 4892K bss, 845920K reserved, 0K cma-reserved) [ 0.147213] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0 [ 0.147332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.147343] Kernel/User page tables isolation: enabled [ 0.147360] ftrace: allocating 48124 entries in 188 pages [ 0.159321] ftrace: allocated 188 pages with 5 groups [ 0.159901] Dynamic Preempt: voluntary [ 0.159931] rcu: Preemptible hierarchical RCU implementation. [ 0.159932] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.159933] Trampoline variant of Tasks RCU enabled. [ 0.159934] Rude variant of Tasks RCU enabled. [ 0.159934] Tracing variant of Tasks RCU enabled. [ 0.159934] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.159935] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.162972] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.163225] random: crng done (trusting CPU's manufacturer) [ 0.163244] Console: colour dummy device 80x25 [ 0.163254] printk: console [tty0] enabled [ 0.163275] ACPI: Core revision 20210930 [ 0.163375] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.163385] APIC: Switch to symmetric I/O mode setup [ 0.163448] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.163777] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.168385] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e5240dc2b, max_idle_ns: 440795340004 ns [ 0.168389] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.44 BogoMIPS (lpj=3600221) [ 0.168391] pid_max: default: 32768 minimum: 301 [ 0.174038] LSM: Security Framework initializing [ 0.174046] Yama: becoming mindful. [ 0.174054] SELinux: Initializing. [ 0.174079] LSM support for eBPF active [ 0.174080] landlock: Up and running. [ 0.174144] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.174198] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.174408] CPU0: Thermal monitoring enabled (TM1) [ 0.174435] process: using mwait in idle threads [ 0.174437] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.174438] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.174441] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.174442] Spectre V2 : Mitigation: Retpolines [ 0.174443] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.174443] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.174444] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.174445] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.174446] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.174449] SRBDS: Mitigation: Microcode [ 0.174449] MDS: Mitigation: Clear CPU buffers [ 0.176359] Freeing SMP alternatives memory: 44K [ 0.176452] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1080 [ 0.176457] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.176579] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.176605] ... version: 3 [ 0.176606] ... bit width: 48 [ 0.176606] ... generic registers: 4 [ 0.176607] ... value mask: 0000ffffffffffff [ 0.176608] ... max period: 00007fffffffffff [ 0.176608] ... fixed-purpose events: 3 [ 0.176609] ... event mask: 000000070000000f [ 0.176704] rcu: Hierarchical SRCU implementation. [ 0.177318] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.177386] smp: Bringing up secondary CPUs ... [ 0.177386] x86: Booting SMP configuration: [ 0.177389] .... node #0, CPUs: #1 #2 #3 #4 [ 0.182473] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.182490] #5 #6 #7 [ 0.183793] smp: Brought up 1 node, 8 CPUs [ 0.183793] smpboot: Max logical packages: 1 [ 0.183793] smpboot: Total of 8 processors activated (57603.53 BogoMIPS) [ 0.185017] devtmpfs: initialized [ 0.185017] x86/mm: Memory block size: 128MB [ 0.186409] ACPI: PM: Registering ACPI NVS region [mem 0xbd235000-0xbd23bfff] (28672 bytes) [ 0.186412] ACPI: PM: Registering ACPI NVS region [mem 0xddcc1000-0xde1e9fff] (5410816 bytes) [ 0.186524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.186527] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.186580] pinctrl core: initialized pinctrl subsystem [ 0.186669] PM: RTC time: 06:59:52, date: 2022-04-13 [ 0.186773] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.186853] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.186860] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.186866] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.186880] thermal_sys: Registered thermal governor 'fair_share' [ 0.186880] thermal_sys: Registered thermal governor 'bang_bang' [ 0.186880] thermal_sys: Registered thermal governor 'step_wise' [ 0.186880] thermal_sys: Registered thermal governor 'user_space' [ 0.186880] cpuidle: using governor menu [ 0.186880] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.186880] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.186880] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.186880] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.186880] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.186880] PCI: Using configuration type 1 for base access [ 0.186880] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.187547] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.188672] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.188680] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.188680] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.188680] cryptd: max_cpu_qlen set to 1000 [ 0.188680] raid6: skip pq benchmark and using algorithm avx2x4 [ 0.188680] raid6: using avx2x2 recovery algorithm [ 0.188680] ACPI: Added _OSI(Module Device) [ 0.188680] ACPI: Added _OSI(Processor Device) [ 0.188680] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.188680] ACPI: Added _OSI(Processor Aggregator Device) [ 0.188680] ACPI: Added _OSI(Linux-Dell-Video) [ 0.188680] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.188680] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.198848] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.200303] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ [ 0.200305] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ [ 0.200497] ACPI: Dynamic OEM Table Load: [ 0.200501] ACPI: SSDT 0xFFFF88E600F7FC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.201129] ACPI: Dynamic OEM Table Load: [ 0.201133] ACPI: SSDT 0xFFFF88E600EBD000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.201792] ACPI: Dynamic OEM Table Load: [ 0.201795] ACPI: SSDT 0xFFFF88E60029C800 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.203987] ACPI: Interpreter enabled [ 0.204010] ACPI: PM: (supports S0 S3 S4 S5) [ 0.204011] ACPI: Using IOAPIC for interrupt routing [ 0.204031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.204528] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.204985] ACPI: PM: Power Resource [PG00] [ 0.205278] ACPI: PM: Power Resource [PG01] [ 0.205540] ACPI: PM: Power Resource [PG02] [ 0.213776] ACPI: PM: Power Resource [FN00] [ 0.213822] ACPI: PM: Power Resource [FN01] [ 0.213863] ACPI: PM: Power Resource [FN02] [ 0.213908] ACPI: PM: Power Resource [FN03] [ 0.213951] ACPI: PM: Power Resource [FN04] [ 0.214518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.214524] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.214632] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.214732] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] [ 0.214733] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.215040] PCI host bridge to bus 0000:00 [ 0.215042] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.215044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.215045] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.215046] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.215047] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.215048] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.215057] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.215108] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.215138] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.215345] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330 [ 0.215360] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit] [ 0.215412] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.215470] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000 [ 0.215485] pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit] [ 0.215537] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.215640] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320 [ 0.215654] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff] [ 0.215725] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.215784] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300 [ 0.215796] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit] [ 0.215849] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.215908] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400 [ 0.215972] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.216162] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400 [ 0.216226] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.216406] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.216471] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.216656] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320 [ 0.216669] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff] [ 0.216741] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.216802] pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100 [ 0.216940] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601 [ 0.216949] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.216955] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.216961] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.216966] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.216972] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.216977] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f15000-0xf7f157ff] [ 0.217006] pci 0000:00:1f.2: PME# supported from D3hot [ 0.217056] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500 [ 0.217070] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f14000-0xf7f140ff 64bit] [ 0.217086] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.217168] pci 0000:01:00.0: [1002:6658] type 00 class 0x030000 [ 0.217178] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.217185] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.217189] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.217194] pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff] [ 0.217198] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref] [ 0.217210] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.217214] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.217240] pci 0000:01:00.0: supports D1 D2 [ 0.217241] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.217312] pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300 [ 0.217322] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit] [ 0.217369] pci 0000:01:00.1: supports D1 D2 [ 0.217415] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.217417] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.217418] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.217420] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.217467] acpiphp: Slot [1] registered [ 0.217470] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.217535] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.217554] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.217580] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit] [ 0.217596] pci 0000:03:00.0: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit pref] [ 0.217695] pci 0000:03:00.0: supports D1 D2 [ 0.217695] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217873] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.217876] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.217879] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.217883] pci 0000:00:1c.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.217928] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401 [ 0.218127] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode) [ 0.218131] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.218135] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.218136] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.218137] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.218138] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.218139] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.218164] pci_bus 0000:05: extended config space not accessible [ 0.218183] pci 0000:05:00.0: [168c:0013] type 00 class 0x020000 [ 0.218205] pci 0000:05:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff] [ 0.218390] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode) [ 0.218401] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.218408] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode) [ 0.218409] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.218410] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.218411] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.218412] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.218413] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.219110] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.219141] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.219171] ACPI: PCI: Interrupt link LNKC configured for IRQ 6 [ 0.219200] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.219230] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.219261] ACPI: PCI: Interrupt link LNKF configured for IRQ 15 [ 0.219290] ACPI: PCI: Interrupt link LNKG configured for IRQ 14 [ 0.219319] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 0.219605] iommu: Default domain type: Translated [ 0.219605] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.219605] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.219605] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.219605] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.219605] vgaarb: loaded [ 0.219605] SCSI subsystem initialized [ 0.219605] libata version 3.00 loaded. [ 0.219605] ACPI: bus type USB registered [ 0.219605] usbcore: registered new interface driver usbfs [ 0.219605] usbcore: registered new interface driver hub [ 0.219605] usbcore: registered new device driver usb [ 0.219605] pps_core: LinuxPPS API ver. 1 registered [ 0.219605] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.219605] PTP clock support registered [ 0.219605] EDAC MC: Ver: 3.0.0 [ 0.219605] Registered efivars operations [ 0.219605] NetLabel: Initializing [ 0.219605] NetLabel: domain hash size = 128 [ 0.219605] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.219605] NetLabel: unlabeled traffic allowed by default [ 0.219605] mctp: management component transport protocol core [ 0.219605] NET: Registered PF_MCTP protocol family [ 0.219605] PCI: Using ACPI for IRQ routing [ 0.221241] PCI: pci_cache_line_size set to 64 bytes [ 0.221277] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.221278] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.221279] e820: reserve RAM buffer [mem 0xbcc51018-0xbfffffff] [ 0.221280] e820: reserve RAM buffer [mem 0xbcc5f018-0xbfffffff] [ 0.221281] e820: reserve RAM buffer [mem 0xbd235000-0xbfffffff] [ 0.221282] e820: reserve RAM buffer [mem 0xbd69a000-0xbfffffff] [ 0.221283] e820: reserve RAM buffer [mem 0xdbb83000-0xdbffffff] [ 0.221284] e820: reserve RAM buffer [mem 0xdda93000-0xdfffffff] [ 0.221285] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.221285] e820: reserve RAM buffer [mem 0x61f000000-0x61fffffff] [ 0.221290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.221290] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.222407] clocksource: Switched to clocksource tsc-early [ 0.232943] VFS: Disk quotas dquot_6.6.0 [ 0.232955] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.233017] pnp: PnP ACPI init [ 0.233132] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.233214] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.233255] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.233326] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.233331] system 00:04: [io 0x02a0-0x02af] has been reserved [ 0.233332] system 00:04: [io 0x0a00-0x0aff] has been reserved [ 0.233367] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.233538] pnp 00:06: [dma 0 disabled] [ 0.233928] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233930] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.233934] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.233936] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.233937] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.233939] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.233940] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.233941] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.233943] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.233944] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.233946] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.234068] pnp: PnP ACPI: found 8 devices [ 0.239584] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.239628] NET: Registered PF_INET protocol family [ 0.239769] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.241355] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.241386] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.241580] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.241671] TCP: Hash tables configured (established 262144 bind 65536) [ 0.241774] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.241856] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.241906] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.241982] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.241986] NET: Registered PF_XDP protocol family [ 0.241995] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.241997] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.242000] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.242002] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.242005] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.242012] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.242014] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.242017] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.242019] pci 0000:00:1c.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.242023] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.242029] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.242040] pci 0000:00:1c.3: PCI bridge to [bus 04-05] [ 0.242043] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.242048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.242050] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.242051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.242052] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.242053] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window] [ 0.242054] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.242055] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.242055] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref] [ 0.242057] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.242057] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.242058] pci_bus 0000:03: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref] [ 0.242059] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.242060] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.242061] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.242062] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.242063] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.242064] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xfeafffff window] [ 0.242065] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.242066] pci_bus 0000:05: resource 4 [mem 0xf7c00000-0xf7cfffff] [ 0.242067] pci_bus 0000:05: resource 5 [io 0x0000-0x0cf7 window] [ 0.242068] pci_bus 0000:05: resource 6 [io 0x0d00-0xffff window] [ 0.242069] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff window] [ 0.242069] pci_bus 0000:05: resource 8 [mem 0x000d0000-0x000dffff window] [ 0.242070] pci_bus 0000:05: resource 9 [mem 0xe0000000-0xfeafffff window] [ 0.258452] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6e0 took 15781 usecs [ 0.274450] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6e0 took 15608 usecs [ 0.274477] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.274484] pci 0000:04:00.0: Disabling ASPM L0s/L1 [ 0.274489] PCI: CLS 64 bytes, default 64 [ 0.274516] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.274517] software IO TLB: mapped [mem 0x00000000cbcc5000-0x00000000cfcc5000] (64MB) [ 0.274562] Trying to unpack rootfs image as initramfs... [ 0.280315] Initialise system trusted keyrings [ 0.280327] Key type blacklist registered [ 0.280361] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.281774] zbud: loaded [ 0.282296] integrity: Platform Keyring initialized [ 0.290032] NET: Registered PF_ALG protocol family [ 0.290034] xor: automatically using best checksumming function avx [ 0.290035] Key type asymmetric registered [ 0.290036] Asymmetric key parser 'x509' registered [ 0.290058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.290089] io scheduler mq-deadline registered [ 0.290091] io scheduler kyber registered [ 0.290115] io scheduler bfq registered [ 0.290700] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.291352] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.291936] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.291955] ACPI: button: Power Button [PWRB] [ 0.291978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.292083] ACPI: button: Power Button [PWRF] [ 0.292603] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.292605] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.292756] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.292757] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.292911] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.292966] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.294968] Non-volatile memory driver v1.3 [ 0.294988] Linux agpgart interface v0.103 [ 0.295502] ahci 0000:00:1f.2: version 3.0 [ 0.295606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode [ 0.295609] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.301763] scsi host0: ahci [ 0.301900] scsi host1: ahci [ 0.301990] scsi host2: ahci [ 0.302053] scsi host3: ahci [ 0.302119] scsi host4: ahci [ 0.302185] scsi host5: ahci [ 0.302212] ata1: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15100 irq 28 [ 0.302214] ata2: DUMMY [ 0.302215] ata3: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15200 irq 28 [ 0.302216] ata4: DUMMY [ 0.302217] ata5: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15300 irq 28 [ 0.302218] ata6: DUMMY [ 0.302412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.302415] ehci-pci: EHCI PCI platform driver [ 0.302491] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.302533] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.302541] ehci-pci 0000:00:1a.0: debug port 2 [ 0.306444] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7f17000 [ 0.314404] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.314438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 0.314440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.314441] usb usb1: Product: EHCI Host Controller [ 0.314443] usb usb1: Manufacturer: Linux 5.16.18-200.fc35.x86_64 ehci_hcd [ 0.314444] usb usb1: SerialNumber: ... [ 0.314557] hub 1-0:1.0: USB hub found [ 0.314562] hub 1-0:1.0: 2 ports detected [ 0.314727] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.314784] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.314793] ehci-pci 0000:00:1d.0: debug port 2 [ 0.318711] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000 [ 0.325411] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.325456] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 0.325458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.325459] usb usb2: Product: EHCI Host Controller [ 0.325461] usb usb2: Manufacturer: Linux 5.16.18-200.fc35.x86_64 ehci_hcd [ 0.325462] usb usb2: SerialNumber: ... [ 0.325566] hub 2-0:1.0: USB hub found [ 0.325571] hub 2-0:1.0: 2 ports detected [ 0.325678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.325682] ohci-pci: OHCI PCI platform driver [ 0.325688] uhci_hcd: USB Universal Host Controller Interface driver [ 0.325787] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.325850] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.326911] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.327043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16 [ 0.327046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.327047] usb usb3: Product: xHCI Host Controller [ 0.327048] usb usb3: Manufacturer: Linux 5.16.18-200.fc35.x86_64 xhci-hcd [ 0.327049] usb usb3: SerialNumber: ... [ 0.327154] hub 3-0:1.0: USB hub found [ 0.327170] hub 3-0:1.0: 14 ports detected [ 0.327575] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.327632] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.327635] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.327667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16 [ 0.327669] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.327670] usb usb4: Product: xHCI Host Controller [ 0.327671] usb usb4: Manufacturer: Linux 5.16.18-200.fc35.x86_64 xhci-hcd [ 0.327672] usb usb4: SerialNumber: ... [ 0.327780] hub 4-0:1.0: USB hub found [ 0.327791] hub 4-0:1.0: 6 ports detected [ 0.328016] usbcore: registered new interface driver usbserial_generic [ 0.328023] usbserial: USB Serial support registered for generic [ 0.328036] i8042: PNP: No PS/2 controller found. [ 0.328083] mousedev: PS/2 mouse device common for all mice [ 0.328174] rtc_cmos 00:02: RTC can wake from S4 [ 0.328363] rtc_cmos 00:02: registered as rtc0 [ 0.328398] rtc_cmos 00:02: setting system clock to 2022-04-13T06:59:52 UTC (1649833192) [ 0.328409] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.328612] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.328627] device-mapper: uevent: version 1.0.3 [ 0.328684] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.328775] intel_pstate: Intel P-state driver initializing [ 0.329521] efifb: probing for efifb [ 0.329531] efifb: No BGRT, not showing boot graphics [ 0.329531] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.329532] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.329533] efifb: scrolling: redraw [ 0.329533] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.329578] fbcon: Deferring console take-over [ 0.329580] fb0: EFI VGA frame buffer device [ 0.329607] hid: raw HID events driver (C) Jiri Kosina [ 0.329640] usbcore: registered new interface driver usbhid [ 0.329640] usbhid: USB HID core driver [ 0.329726] drop_monitor: Initializing network drop monitor service [ 0.329774] Initializing XFRM netlink socket [ 0.329853] NET: Registered PF_INET6 protocol family [ 0.556409] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.564409] usb 3-6: new full-speed USB device number 2 using xhci_hcd [ 0.564416] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.607913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.607939] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.607965] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.608244] ata1.00: supports DRM functions and may not be fully accessible [ 0.608246] ata1.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ02B6Q, max UDMA/133 [ 0.608647] ata1.00: disabling queued TRIM support [ 0.608649] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.609087] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210930/psargs-330) [ 0.609092] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210930/psparse-529) [ 0.609097] ata5.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100 [ 0.610010] ata3.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133 [ 0.610432] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.610538] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210930/psargs-330) [ 0.610543] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210930/psparse-529) [ 0.610548] ata5.00: configured for UDMA/100 [ 0.610865] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 0.611163] ata1.00: supports DRM functions and may not be fully accessible [ 0.611529] ata1.00: disabling queued TRIM support [ 0.613149] ata3.00: configured for UDMA/133 [ 0.613787] ata1.00: configured for UDMA/133 [ 0.613991] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5 [ 0.614373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.614450] ata1.00: Enabling discard_zeroes_data [ 0.614517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EALX-009 1H15 PQ: 0 ANSI: 5 [ 0.614519] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.614563] sd 0:0:0:0: [sda] Write Protect is off [ 0.614565] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.614590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.614654] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.614756] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.614767] sd 2:0:0:0: [sdb] Write Protect is off [ 0.614768] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.614781] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.614908] ata1.00: Enabling discard_zeroes_data [ 0.616154] Freeing initrd memory: 50556K [ 0.616298] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5 [ 0.621306] Segment Routing with IPv6 [ 0.621308] RPL Segment Routing with IPv6 [ 0.621316] In-situ OAM (IOAM) with IPv6 [ 0.621336] mip6: Mobile IPv6 [ 0.621337] NET: Registered PF_PACKET protocol family [ 0.621720] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.621781] microcode: Microcode Update Driver: v2.2. [ 0.621786] IPI shorthand broadcast: enabled [ 0.621792] AVX2 version of gcm_enc/dec engaged. [ 0.621843] AES CTR mode by8 optimization enabled [ 0.622032] sched_clock: Marking stable (621793290, 229917)->(629382284, -7359077) [ 0.622264] registered taskstats version 1 [ 0.622355] Loading compiled-in X.509 certificates [ 0.626715] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 0.626864] ata1.00: Enabling discard_zeroes_data [ 0.631523] sdb: sdb1 sdb2 [ 0.638055] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.638058] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.638589] sd 0:0:0:0: [sda] supports TCG Opal [ 0.638591] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.641686] sd 2:0:0:0: [sdb] Attached SCSI disk [ 0.646237] Loaded X.509 cert 'Fedora kernel signing key: 7c8aa450c55ec76ac3adde1b1b789564f5fb7d57' [ 0.646457] zswap: loaded using pool lzo/zbud [ 0.646780] page_owner is disabled [ 0.646818] Key type ._fscrypt registered [ 0.646819] Key type .fscrypt registered [ 0.646819] Key type fscrypt-provisioning registered [ 0.647097] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 0.647114] Key type big_key registered [ 0.649452] Key type encrypted registered [ 0.649983] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.664317] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.664364] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 0.672584] integrity: Loaded X.509 cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' [ 0.672587] ima: No TPM chip found, activating TPM-bypass! [ 0.672590] Loading compiled-in module X.509 certificates [ 0.673020] Loaded X.509 cert 'Fedora kernel signing key: 7c8aa450c55ec76ac3adde1b1b789564f5fb7d57' [ 0.673021] ima: Allocated hash algorithm: sha256 [ 0.673027] ima: No architecture policies found [ 0.673037] evm: Initialising EVM extended attributes: [ 0.673038] evm: security.selinux [ 0.673038] evm: security.SMACK64 (disabled) [ 0.673039] evm: security.SMACK64EXEC (disabled) [ 0.673039] evm: security.SMACK64TRANSMUTE (disabled) [ 0.673040] evm: security.SMACK64MMAP (disabled) [ 0.673040] evm: security.apparmor (disabled) [ 0.673040] evm: security.ima [ 0.673041] evm: security.capability [ 0.673041] evm: HMAC attrs: 0x1 [ 0.686726] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00 [ 0.686730] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.687007] hub 1-1:1.0: USB hub found [ 0.687098] hub 1-1:1.0: 6 ports detected [ 0.692199] alg: No test for 842 (842-scomp) [ 0.692218] alg: No test for 842 (842-generic) [ 0.693717] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00 [ 0.693720] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.693752] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 0.693754] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 0.693755] usb 3-6: Product: USB Receiver [ 0.693756] usb 3-6: Manufacturer: Logitech [ 0.693849] hub 2-1:1.0: USB hub found [ 0.693957] hub 2-1:1.0: 8 ports detected [ 0.696183] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52B.0001/input/input2 [ 0.747610] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0 [ 0.749437] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52B.0002/input/input3 [ 0.749625] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52B.0002/input/input4 [ 0.783159] PM: Magic number: 2:42:974 [ 0.783249] memory memory21: hash matches [ 0.783293] RAS: Correctable Errors collector initialized. [ 0.801480] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52B.0002/input/input5 [ 0.801631] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1 [ 0.802953] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [ 0.803844] Freeing unused decrypted memory: 2036K [ 0.804203] Freeing unused kernel image (initmem) memory: 2684K [ 0.805446] usb 4-6: new SuperSpeed USB device number 2 using xhci_hcd [ 0.808410] Write protecting the kernel read-only data: 30720k [ 0.808919] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.809213] Freeing unused kernel image (rodata/data gap) memory: 1608K [ 0.817637] usb 4-6: New USB device found, idVendor=413c, idProduct=8440, bcdDevice= 1.10 [ 0.817641] usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.818433] hub 4-6:1.0: USB hub found [ 0.818946] hub 4-6:1.0: 2 ports detected [ 0.843011] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.843013] rodata_test: all tests were successful [ 0.843014] x86/mm: Checking user space page tables [ 0.874815] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.874818] Run /init as init process [ 0.874819] with arguments: [ 0.874819] /init [ 0.874820] rhgb [ 0.874820] with environment: [ 0.874821] HOME=/ [ 0.874821] TERM=linux [ 0.874822] BOOT_IMAGE=(hd0,gpt5)/vmlinuz-5.16.18-200.fc35.x86_64 [ 0.890830] systemd[1]: systemd v249.9-1.fc35 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 0.890930] systemd[1]: Detected architecture x86-64. [ 0.890932] systemd[1]: Running in initial RAM disk. [ 0.890962] systemd[1]: Hostname set to ... [ 0.931420] usb 3-10: new high-speed USB device number 3 using xhci_hcd [ 0.942052] systemd[1]: Queued start job for default target Initrd Default Target. [ 0.942193] systemd[1]: Reached target Initrd /usr File System. [ 0.942232] systemd[1]: Reached target Local File Systems. [ 0.942246] systemd[1]: Reached target Slice Units. [ 0.942257] systemd[1]: Reached target Swaps. [ 0.942267] systemd[1]: Reached target Timer Units. [ 0.942325] systemd[1]: Listening on D-Bus System Message Bus Socket. [ 0.942466] systemd[1]: Listening on Journal Audit Socket. [ 0.942531] systemd[1]: Listening on Journal Socket (/dev/log). [ 0.942599] systemd[1]: Listening on Journal Socket. [ 0.942668] systemd[1]: Listening on udev Control Socket. [ 0.942721] systemd[1]: Listening on udev Kernel Socket. [ 0.942732] systemd[1]: Reached target Socket Units. [ 0.943802] systemd[1]: Starting Create List of Static Device Nodes... [ 0.943853] systemd[1]: Condition check resulted in Memstrack Anylazing Service being skipped. [ 0.944321] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 0.945503] systemd[1]: Starting Journal Service... [ 0.946177] systemd[1]: Starting Load Kernel Modules... [ 0.946233] systemd[1]: Condition check resulted in Create System Users being skipped. [ 0.946822] systemd[1]: Starting Setup Virtual Console... [ 0.947594] systemd[1]: Finished Create List of Static Device Nodes. [ 0.948531] systemd[1]: Starting Create Static Device Nodes in /dev... [ 0.954482] systemd[1]: Finished Create Static Device Nodes in /dev. [ 0.958766] fuse: init (API version 7.35) [ 0.962625] IPMI message handler: version 39.2 [ 0.963926] ipmi device interface [ 0.964729] systemd[1]: Finished Load Kernel Modules. [ 0.965673] systemd[1]: Starting Apply Kernel Variables... [ 0.969897] systemd[1]: Finished Apply Kernel Variables. [ 0.984035] systemd[1]: Started Journal Service. [ 1.057655] usb 3-10: New USB device found, idVendor=413c, idProduct=8442, bcdDevice= 1.00 [ 1.057661] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.057663] usb 3-10: SerialNumber: ... [ 1.058218] hub 3-10:1.0: USB hub found [ 1.058273] hub 3-10:1.0: 6 ports detected [ 1.282398] tsc: Refined TSC clocksource calibration: 3599.996 MHz [ 1.282405] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44fb235b, max_idle_ns: 440795341910 ns [ 1.282425] clocksource: Switched to clocksource tsc [ 1.297211] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.302896] ACPI: bus type drm_connector registered [ 1.305613] r8169 0000:03:00.0 eth0: RTL8168g/8111g, XXX, XID 4c0, IRQ 30 [ 1.305618] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.330400] usb 3-10.5: new high-speed USB device number 4 using xhci_hcd [ 1.406581] usb 3-10.5: New USB device found, idVendor=0451, idProduct=82ff, bcdDevice= 2.00 [ 1.406587] usb 3-10.5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.407588] hid-generic 0003:0451:82FF.0004: hiddev98,hidraw0: USB HID v1.11 Device [HID 0451:82ff] on usb-0000:00:14.0-10.5/input0 [ 1.407866] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.421926] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [ 1.455375] [drm] radeon kernel modesetting enabled. [ 1.455427] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.455430] fb0: switching to radeon from EFI VGA [ 1.455496] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 1.455718] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x174B:0xE258 0x00). [ 1.455735] [drm] doorbell mmio base: 0xF0000000 [ 1.455736] [drm] doorbell mmio size: 8388608 [ 1.455759] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 1.455762] caller pci_map_rom+0x69/0x1b0 mapping multiple BARs [ 1.455788] ATOM BIOS: Bonaire [ 1.455837] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 1.455840] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF [ 1.455844] [drm] Detected VRAM RAM=1024M, BAR=256M [ 1.455845] [drm] RAM width 128bits DDR [ 1.455871] [drm] radeon: 1024M of VRAM memory ready [ 1.455872] [drm] radeon: 2048M of GTT memory ready. [ 1.455881] [drm] Loading bonaire Microcode [ 1.464163] [drm] Internal thermal controller with fan control [ 1.471395] usb 3-10.6: new high-speed USB device number 5 using xhci_hcd [ 1.471520] [drm] radeon: dpm initialized [ 1.483879] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 1.489212] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 1.489219] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 1.490053] [drm] PCIE gen 3 link speeds already enabled [ 1.527725] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). [ 1.527834] radeon 0000:01:00.0: WB enabled [ 1.527843] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 1.527846] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 [ 1.527848] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 [ 1.527849] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 1.527851] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 [ 1.528208] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 [ 1.528349] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 [ 1.528351] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c [ 1.532900] radeon 0000:01:00.0: radeon: using MSI. [ 1.532923] [drm] radeon: irq initialized. [ 1.535023] [drm] ring test on 0 succeeded in 3 usecs [ 1.535091] [drm] ring test on 1 succeeded in 3 usecs [ 1.535103] [drm] ring test on 2 succeeded in 3 usecs [ 1.535265] [drm] ring test on 3 succeeded in 4 usecs [ 1.535272] [drm] ring test on 4 succeeded in 4 usecs [ 1.537766] input: Logitech Wireless Device PID:4040 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:4040.0005/input/input7 [ 1.541912] hid-generic 0003:046D:4040.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:4040] on usb-0000:00:14.0-6/input2:1 [ 1.542198] input: Logitech Wireless Device PID:2011 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:2011.0006/input/input11 [ 1.542326] hid-generic 0003:046D:2011.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:2011] on usb-0000:00:14.0-6/input2:2 [ 1.547573] usb 3-10.6: New USB device found, idVendor=413c, idProduct=82ee, bcdDevice= 1.10 [ 1.547576] usb 3-10.6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.566637] input: Logitech M280/320/275 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:4040.0005/input/input15 [ 1.566714] logitech-hidpp-device 0003:046D:4040.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M280/320/275] on usb-0000:00:14.0-6/input2:1 [ 1.581401] [drm] ring test on 5 succeeded in 2 usecs [ 1.601421] [drm] UVD initialized successfully. [ 1.674725] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:2011.0006/input/input16 [ 1.674853] logitech-hidpp-device 0003:046D:2011.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-6/input2:2 [ 1.711501] [drm] ring test on 6 succeeded in 22 usecs [ 1.711510] [drm] ring test on 7 succeeded in 3 usecs [ 1.711512] [drm] VCE initialized successfully. [ 1.712262] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.712402] [drm] ib test on ring 1 succeeded in 0 usecs [ 1.712537] [drm] ib test on ring 2 succeeded in 0 usecs [ 1.712671] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.712805] [drm] ib test on ring 4 succeeded in 0 usecs [ 2.234463] [drm] ib test on ring 5 succeeded [ 2.255367] [drm] ib test on ring 6 succeeded [ 2.256105] [drm] ib test on ring 7 succeeded [ 2.256472] [drm] Radeon Display Connectors [ 2.256473] [drm] Connector 0: [ 2.256474] [drm] DP-1 [ 2.256475] [drm] HPD2 [ 2.256476] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 2.256479] [drm] Encoders: [ 2.256480] [drm] DFP1: INTERNAL_UNIPHY2 [ 2.256481] [drm] Connector 1: [ 2.256481] [drm] HDMI-A-1 [ 2.256482] [drm] HPD3 [ 2.256483] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 2.256485] [drm] Encoders: [ 2.256486] [drm] DFP2: INTERNAL_UNIPHY2 [ 2.256487] [drm] Connector 2: [ 2.256487] [drm] DVI-D-1 [ 2.256488] [drm] HPD1 [ 2.256489] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 2.256491] [drm] Encoders: [ 2.256492] [drm] DFP3: INTERNAL_UNIPHY1 [ 2.256492] [drm] Connector 3: [ 2.256493] [drm] DVI-I-1 [ 2.256494] [drm] HPD6 [ 2.256494] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 2.256496] [drm] Encoders: [ 2.256497] [drm] DFP4: INTERNAL_UNIPHY [ 2.256498] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.330401] [drm] fb mappable at 0xE0731000 [ 2.330403] [drm] vram apper at 0xE0000000 [ 2.330404] [drm] size 14745600 [ 2.330405] [drm] fb depth is 24 [ 2.330406] [drm] pitch is 10240 [ 2.330447] fbcon: radeondrmfb (fb0) is primary device [ 2.330449] fbcon: Deferring console take-over [ 2.330451] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 2.343574] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 2.349834] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.808376] [drm] amdgpu kernel modesetting enabled. [ 2.808464] amdgpu: CRAT table not found [ 2.808467] amdgpu: Virtual CRAT table created for CPU [ 2.808480] amdgpu: Topology: Add CPU node [ 3.140069] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 3.444468] systemd-journald[281]: Received SIGTERM from PID 1 (systemd). [ 3.639288] SELinux: policy capability network_peer_controls=1 [ 3.639291] SELinux: policy capability open_perms=1 [ 3.639292] SELinux: policy capability extended_socket_class=1 [ 3.639292] SELinux: policy capability always_check_network=0 [ 3.639293] SELinux: policy capability cgroup_seclabel=1 [ 3.639293] SELinux: policy capability nnp_nosuid_transition=1 [ 3.639293] SELinux: policy capability genfs_seclabel_symlinks=0 [ 3.668949] systemd[1]: Successfully loaded SELinux policy in 68.176ms. [ 3.686198] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 3.746421] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 25.334ms. [ 3.753361] systemd[1]: systemd v249.11-1.fc35 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.765453] systemd[1]: Detected architecture x86-64. [ 3.821262] systemd-sysv-generator[706]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.825112] systemd-sysv-generator[706]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.825175] systemd-sysv-generator[706]: SysV service '/etc/rc.d/init.d/vpnagentd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.854357] zram: Added device: zram0 [ 4.149296] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 4.149466] systemd[1]: Stopped Switch Root. [ 4.149776] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 4.149997] systemd[1]: Created slice Virtual Machine and Container Slice. [ 4.150255] systemd[1]: Created slice Slice /system/getty. [ 4.150559] systemd[1]: Created slice Slice /system/modprobe. [ 4.150798] systemd[1]: Created slice Slice /system/systemd-fsck. [ 4.151042] systemd[1]: Created slice Slice /system/systemd-zram-setup. [ 4.151243] systemd[1]: Created slice User and Session Slice. [ 4.151271] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 4.151357] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.151693] systemd[1]: Set up automount ... [ 4.151740] systemd[1]: Reached target Local Encrypted Volumes. [ 4.151764] systemd[1]: Reached target Login Prompts. [ 4.151792] systemd[1]: Stopped target Switch Root. [ 4.151812] systemd[1]: Stopped target Initrd File Systems. [ 4.151831] systemd[1]: Stopped target Initrd Root File System. [ 4.151876] systemd[1]: Reached target Slice Units. [ 4.151909] systemd[1]: Reached target Local Verity Protected Volumes. [ 4.152201] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.152817] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.154702] systemd[1]: Listening on multipathd control socket. [ 4.156246] systemd[1]: Listening on Process Core Dump Socket. [ 4.156347] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.156698] systemd[1]: Listening on udev Control Socket. [ 4.156913] systemd[1]: Listening on udev Kernel Socket. [ 4.157541] systemd[1]: Activating swap /dev/mapper/XXXXXXXXXXXXX [ 4.158718] systemd[1]: Mounting Huge Pages File System... [ 4.159599] systemd[1]: Mounting POSIX Message Queue File System... [ 4.160422] systemd[1]: Mounting Kernel Debug File System... [ 4.161222] systemd[1]: Mounting Kernel Trace File System... [ 4.161386] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 4.162276] systemd[1]: Starting Create List of Static Device Nodes... [ 4.163110] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 4.164069] systemd[1]: Starting Load Kernel Module configfs... [ 4.164768] Adding 8388604k swap on /dev/mapper/XXXXXXXXXXX Priority:-2 extents:1 across:8388604k SSFS [ 4.165194] systemd[1]: Starting Load Kernel Module drm... [ 4.166078] systemd[1]: Starting Load Kernel Module fuse... [ 4.166922] systemd[1]: Starting Preprocess NFS configuration convertion... [ 4.166993] systemd[1]: plymouth-switch-root.service: Deactivated successfully. [ 4.167044] systemd[1]: Stopped Plymouth switch root service. [ 4.167234] systemd[1]: Stopped Journal Service. [ 4.168922] systemd[1]: Starting Journal Service... [ 4.170932] systemd[1]: Starting Load Kernel Modules... [ 4.172164] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.172545] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 4.173907] systemd[1]: Starting Coldplug All udev Devices... [ 4.178307] systemd[1]: Activated swap /dev/mapper/XXXXXXXXXXX [ 4.179556] systemd[1]: Mounted Huge Pages File System. [ 4.179683] systemd[1]: Mounted POSIX Message Queue File System. [ 4.179796] systemd[1]: Mounted Kernel Debug File System. [ 4.179905] systemd[1]: Mounted Kernel Trace File System. [ 4.180269] systemd[1]: Finished Create List of Static Device Nodes. [ 4.180525] systemd[1]: XXX@XXX: Deactivated successfully. [ 4.180681] systemd[1]: Finished Load Kernel Module configfs. [ 4.180906] systemd[1]: XXX@XXX: Deactivated successfully. [ 4.181047] systemd[1]: Finished Load Kernel Module drm. [ 4.181269] systemd[1]: XXX@XXX: Deactivated successfully. [ 4.181438] systemd[1]: Finished Load Kernel Module fuse. [ 4.181756] systemd[1]: nfs-convert.service: Deactivated successfully. [ 4.181898] systemd[1]: Finished Preprocess NFS configuration convertion. [ 4.183066] systemd[1]: Mounting FUSE Control File System... [ 4.184136] systemd[1]: Mounting Kernel Configuration File System... [ 4.184741] systemd[1]: Mounted FUSE Control File System. [ 4.184955] EXT4-fs (dm-0): re-mounted. Opts: (null). Quota mode: none. [ 4.186085] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.186333] systemd[1]: Mounted Kernel Configuration File System. [ 4.186481] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped. [ 4.186524] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 4.188132] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.189176] systemd[1]: Starting Load/Save Random Seed... [ 4.189265] systemd-journald[728]: File /run/log/journal/0f9fcdb93e0542fe804be8326fedec35/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 4.189280] systemd[1]: Condition check resulted in Create System Users being skipped. [ 4.190378] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.191016] systemd[1]: Finished Load Kernel Modules. [ 4.192314] systemd[1]: Starting Apply Kernel Variables... [ 4.193973] systemd[1]: Started Journal Service. [ 4.201905] systemd-journald[728]: Received client request to flush runtime journal. [ 4.532923] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20210930/utaddress-204) [ 4.532932] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.532935] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210930/utaddress-204) [ 4.532939] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.532941] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210930/utaddress-204) [ 4.532945] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210930/utaddress-204) [ 4.532948] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.532950] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210930/utaddress-204) [ 4.532953] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210930/utaddress-204) [ 4.532955] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.532956] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.568865] input: PC Speaker as /devices/platform/pcspkr/input/input17 [ 4.574072] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 4.574104] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.577977] i2c i2c-9: 4/4 memory slots populated (from DMI) [ 4.580868] i2c i2c-9: Successfully instantiated SPD at 0x50 [ 4.583994] i2c i2c-9: Successfully instantiated SPD at 0x51 [ 4.585224] i2c i2c-9: Successfully instantiated SPD at 0x52 [ 4.587167] i2c i2c-9: Successfully instantiated SPD at 0x53 [ 4.640591] asus_wmi: ASUS WMI generic driver loaded [ 4.659783] asus_wmi: Initialization: 0x0 [ 4.659813] asus_wmi: BIOS WMI version: 0.9 [ 4.659857] asus_wmi: SFUN value: 0x0 [ 4.659860] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 4.662464] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input18 [ 4.670573] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.671127] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.704501] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 4.704505] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.704506] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.704507] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.732364] zram0: detected capacity change from 0 to 16777216 [ 4.819408] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 4.842467] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 4.858057] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 4.895894] iTCO_vendor_support: vendor-support=0 [ 4.906372] ath5k 0000:05:00.0: enabling device (0000 -> 0002) [ 4.906483] ath5k 0000:05:00.0: registered as 'phy0' [ 4.906701] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 4.908867] at24 9-0050: supply vcc not found, using dummy regulator [ 4.909485] at24 9-0050: 256 byte spd EEPROM, read-only [ 4.909511] at24 9-0051: supply vcc not found, using dummy regulator [ 4.910125] at24 9-0051: 256 byte spd EEPROM, read-only [ 4.910145] at24 9-0052: supply vcc not found, using dummy regulator [ 4.910768] at24 9-0052: 256 byte spd EEPROM, read-only [ 4.910788] at24 9-0053: supply vcc not found, using dummy regulator [ 4.911370] at24 9-0053: 256 byte spd EEPROM, read-only [ 4.916911] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.916915] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.916918] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.916920] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.916921] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 4.916923] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.916925] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.916926] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.916928] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.917283] iTCO_wdt iTCO_wdt.1.auto: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860) [ 4.922989] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 4.925904] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 4.928296] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 4.929285] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 4.938912] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 4.941792] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24 [ 4.942253] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [ 4.945900] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [ 4.945964] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 [ 4.946015] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 [ 4.946065] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 [ 4.975660] intel_rapl_common: Found RAPL domain package [ 4.975664] intel_rapl_common: Found RAPL domain core [ 4.975666] intel_rapl_common: Found RAPL domain dram [ 5.513077] ath: EEPROM regdomain: 0x0 [ 5.513081] ath: EEPROM indicates default country code should be used [ 5.513082] ath: doing EEPROM country->regdmn map search [ 5.513083] ath: country maps to regdmn code: 0x3a [ 5.513084] ath: Country alpha2 being used: US [ 5.513085] ath: Regpair used: 0x3a [ 5.513110] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.513881] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) [ 5.521450] ath5k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 5.986151] loop: module loaded [ 5.986788] loop0: detected capacity change from 0 to 113592 [ 5.989957] loop1: detected capacity change from 0 to 333552 [ 5.993764] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.029713] loop2: detected capacity change from 0 to 132648 [ 6.031317] loop3: detected capacity change from 0 to 262224 [ 6.097140] loop4: detected capacity change from 0 to 63672 [ 6.174658] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.176772] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.220309] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.361741] RPC: Registered named UNIX socket transport module. [ 6.361744] RPC: Registered udp transport module. [ 6.361745] RPC: Registered tcp transport module. [ 6.361745] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.212524] NET: Registered PF_QIPCRTR protocol family [ 8.119432] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 8.251510] r8169 0000:03:00.0 enp3s0: Link is Down [ 11.477617] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.477626] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 14.595657] tun: Universal TUN/TAP device driver, 1.6 [ 14.930838] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 21.282101] rfkill: input handler disabled [ 31.614659] logitech-hidpp-device 0003:046D:2011.0006: HID++ 1.0 device connected. [ 35.093542] rfkill: input handler enabled [ 37.878236] rfkill: input handler disabled [ 260.592993] logitech-hidpp-device 0003:046D:4040.0005: HID++ 4.1 device connected. [ 1291.640886] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 6690.740754] usb 3-10: USB disconnect, device number 3 [ 6690.740766] usb 3-10.5: USB disconnect, device number 4 [ 6690.743195] usb 3-10.6: USB disconnect, device number 5 [ 6690.925597] usb 4-6: USB disconnect, device number 2 [ 6691.113562] usb 3-10: new high-speed USB device number 6 using xhci_hcd [ 6691.239849] usb 3-10: New USB device found, idVendor=413c, idProduct=8442, bcdDevice= 1.00 [ 6691.239862] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6691.239868] usb 3-10: SerialNumber: ... [ 6691.240996] hub 3-10:1.0: USB hub found [ 6691.241041] hub 3-10:1.0: 6 ports detected [ 6691.517552] usb 3-10.5: new high-speed USB device number 7 using xhci_hcd [ 6691.593916] usb 3-10.5: New USB device found, idVendor=0451, idProduct=82ff, bcdDevice= 2.00 [ 6691.593935] usb 3-10.5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6691.596138] hid-generic 0003:0451:82FF.0007: hiddev97,hidraw0: USB HID v1.11 Device [HID 0451:82ff] on usb-0000:00:14.0-10.5/input0 [ 6691.708546] usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd [ 6691.720911] usb 4-6: New USB device found, idVendor=413c, idProduct=8440, bcdDevice= 1.10 [ 6691.720928] usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6691.722344] hub 4-6:1.0: USB hub found [ 6691.722867] hub 4-6:1.0: 2 ports detected [ 6691.784561] usb 3-10.6: new high-speed USB device number 8 using xhci_hcd [ 6691.860801] usb 3-10.6: New USB device found, idVendor=413c, idProduct=82ee, bcdDevice= 1.10 [ 6691.860814] usb 3-10.6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6712.888833] show_signal: 7 callbacks suppressed [ 6712.888836] traps: dleyna-renderer[18979] trap divide error ip:7f8c4c899ba4 sp:7ffec7b2df10 error:0 in libglib-2.0.so.0.7000.5[7f8c4c873000+91000] [18074.570044] usb 3-6: USB disconnect, device number 2 [18076.024088] usb 3-6: new full-speed USB device number 9 using xhci_hcd [18076.152365] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [18076.152369] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [18076.152371] usb 3-6: Product: USB Receiver [18076.152372] usb 3-6: Manufacturer: Logitech [18076.158851] logitech-djreceiver 0003:046D:C52B.000A: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [18076.274765] input: Logitech M280/320/275 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.000A/0003:046D:4040.000B/input/input30 [18076.274913] logitech-hidpp-device 0003:046D:4040.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech M280/320/275] on usb-0000:00:14.0-6/input2:1 [18076.280823] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.000A/0003:046D:2011.000C/input/input31 [18076.281007] logitech-hidpp-device 0003:046D:2011.000C: input,hidraw3: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-6/input2:2 [18077.356716] logitech-hidpp-device 0003:046D:2011.000C: HID++ 1.0 device connected. [18079.504761] logitech-hidpp-device 0003:046D:4040.000B: HID++ 4.1 device connected. [22966.096820] traps: dleyna-renderer[62679] trap divide error ip:7f6bee744ba4 sp:7ffc3c105b50 error:0 in libglib-2.0.so.0.7000.5[7f6bee71e000+91000] [24038.773820] sanchosql[66030]: segfault at 8 ip 00007f5bdaaee3c8 sp 00007ffe99ffa348 error 4 in libglibmm-2.4.so.1.3.0[7f5bdaac4000+35000] [24038.773829] Code: 00 90 f3 0f 1e fa 48 8d 47 10 48 c7 47 08 00 00 00 00 48 89 07 c6 47 10 00 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 8d 47 10 <48> 8b 56 08 48 89 07 4c 8b 06 4c 01 c2 4c 89 c6 e9 d3 62 00 00 90 [24045.108553] sanchosql[66077]: segfault at 8 ip 00007fe348e0a3c8 sp 00007ffc5737f9e8 error 4 in libglibmm-2.4.so.1.3.0[7fe348de0000+35000] [24045.108583] Code: 00 90 f3 0f 1e fa 48 8d 47 10 48 c7 47 08 00 00 00 00 48 89 07 c6 47 10 00 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 8d 47 10 <48> 8b 56 08 48 89 07 4c 8b 06 4c 01 c2 4c 89 c6 e9 d3 62 00 00 90 [30767.162321] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [32146.516276] radeon 0000:01:00.0: IH ring buffer overflow (0x00000010, 0x00000000, 0x00000020) [37287.031367] SELinux: Converting 758 SID table entries... [37287.036376] SELinux: policy capability network_peer_controls=1 [37287.036378] SELinux: policy capability open_perms=1 [37287.036379] SELinux: policy capability extended_socket_class=1 [37287.036379] SELinux: policy capability always_check_network=0 [37287.036380] SELinux: policy capability cgroup_seclabel=1 [37287.036380] SELinux: policy capability nnp_nosuid_transition=1 [37287.036381] SELinux: policy capability genfs_seclabel_symlinks=0 [37288.445467] systemd-sysv-generator[96746]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [37288.445551] systemd-sysv-generator[96746]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [37288.445577] systemd-sysv-generator[96746]: SysV service '/etc/rc.d/init.d/vpnagentd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [37311.155132] st: Version 20160209, fixed bufsize 32768, s/g segs 256