[122604.974457] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [122604.974465] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [122605.024555] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [122605.033579] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [122605.033601] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [122605.070031] ata1.00: configured for UDMA/133 [122605.323017] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [122605.588987] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [122606.309642] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [122606.576245] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [122607.253945] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [122607.255298] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [122607.259992] wlp3s0: authenticated [122607.260096] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [122607.260554] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [122607.269342] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [122607.273198] wlp3s0: associated [122607.273455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [122633.047009] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [122633.047025] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [138461.106538] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [138461.235361] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138461.503329] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138462.049348] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138462.325463] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138462.840371] PM: suspend entry (deep) [138463.408214] Filesystems sync: 0.567 seconds [138463.465895] Freezing user space processes ... (elapsed 0.002 seconds) done. [138463.468688] OOM killer disabled. [138463.468690] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [138463.469937] printk: Suspending console(s) (use no_console_suspend to debug) [138463.477210] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [138463.479152] sd 1:0:0:0: [sdb] Stopping disk [138463.480869] sd 0:0:0:0: [sda] Synchronizing SCSI cache [138463.500954] sd 0:0:0:0: [sda] Stopping disk [138464.855237] PM: suspend devices took 1.385 seconds [138464.868512] ACPI: EC: interrupt blocked [138464.881490] ACPI: Preparing to enter system sleep state S3 [138464.954228] ACPI: EC: event blocked [138464.954230] ACPI: EC: EC stopped [138464.954231] PM: Saving platform NVS memory [138464.954384] Disabling non-boot CPUs ... [138464.956331] smpboot: CPU 1 is now offline [138464.958749] IRQ 30: no longer affine to CPU2 [138464.959790] smpboot: CPU 2 is now offline [138464.963175] smpboot: CPU 3 is now offline [138464.966707] smpboot: CPU 4 is now offline [138464.969650] IRQ 23: no longer affine to CPU5 [138464.970682] smpboot: CPU 5 is now offline [138464.972803] IRQ 16: no longer affine to CPU6 [138464.973872] smpboot: CPU 6 is now offline [138464.976030] IRQ 28: no longer affine to CPU7 [138464.976036] IRQ 29: no longer affine to CPU7 [138464.976041] IRQ 33: no longer affine to CPU7 [138464.977105] smpboot: CPU 7 is now offline [138464.979867] ACPI: Low-level resume complete [138464.979923] ACPI: EC: EC started [138464.979924] PM: Restoring platform NVS memory [138464.981435] Enabling non-boot CPUs ... [138464.981495] x86: Booting SMP configuration: [138464.981496] smpboot: Booting Node 0 Processor 1 APIC 0x2 [138464.985527] CPU1 is up [138464.985584] smpboot: Booting Node 0 Processor 2 APIC 0x4 [138464.989256] CPU2 is up [138464.989297] smpboot: Booting Node 0 Processor 3 APIC 0x6 [138464.992968] CPU3 is up [138464.993009] smpboot: Booting Node 0 Processor 4 APIC 0x1 [138464.995891] CPU4 is up [138464.995927] smpboot: Booting Node 0 Processor 5 APIC 0x3 [138464.998691] CPU5 is up [138464.998725] smpboot: Booting Node 0 Processor 6 APIC 0x5 [138465.001491] CPU6 is up [138465.001524] smpboot: Booting Node 0 Processor 7 APIC 0x7 [138465.004317] CPU7 is up [138465.006789] ACPI: Waking up from system sleep state S3 [138465.073616] ACPI: EC: interrupt unblocked [138465.097495] ACPI: EC: event unblocked [138465.097548] usb usb3: root hub lost power or was reset [138465.097550] usb usb4: root hub lost power or was reset [138465.098108] usb usb1: root hub lost power or was reset [138465.098137] usb usb2: root hub lost power or was reset [138465.101994] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [138465.102023] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [138465.107776] sd 1:0:0:0: [sdb] Starting disk [138465.107845] sd 0:0:0:0: [sda] Starting disk [138465.110489] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138465.377050] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138465.419567] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [138465.421660] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138465.421663] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138465.426993] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138465.426998] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138465.428764] ata3.00: configured for UDMA/133 [138465.432153] usb 2-1: reset high-speed USB device number 2 using ehci-pci [138465.432160] usb 1-1: reset high-speed USB device number 2 using ehci-pci [138465.838141] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [138465.986161] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [138466.130130] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [138466.210370] PM: resume devices took 1.113 seconds [138466.210411] OOM killer enabled. [138466.210412] Restarting tasks ... done. [138466.467580] PM: suspend exit [138466.468169] Bluetooth: hci0: unexpected event for opcode 0x0000 [138467.239048] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [138467.241385] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [138467.418130] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138467.418138] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138467.449073] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [138467.451672] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [138467.468509] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [138467.477518] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138467.477524] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138467.513916] ata2.00: configured for UDMA/133 [138467.649108] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138467.649112] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138467.699123] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [138467.708110] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [138467.708112] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [138467.744501] ata1.00: configured for UDMA/133 [138467.987424] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138468.253472] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138468.952375] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138469.218504] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [138469.889818] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [138469.890894] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [138469.894169] wlp3s0: authenticated [138469.894322] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [138469.894987] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [138469.898727] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [138469.902548] wlp3s0: associated [138469.902967] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [138495.805462] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [138495.805479] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [149773.506906] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [149773.628455] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149773.896635] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149773.993440] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149774.269680] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149774.813106] PM: suspend entry (deep) [149775.391641] Filesystems sync: 0.578 seconds [149775.449748] Freezing user space processes ... (elapsed 0.002 seconds) done. [149775.452745] OOM killer disabled. [149775.452747] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [149775.454079] printk: Suspending console(s) (use no_console_suspend to debug) [149775.466141] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [149775.467081] sd 0:0:0:0: [sda] Synchronizing SCSI cache [149775.468005] sd 1:0:0:0: [sdb] Stopping disk [149775.513887] sd 0:0:0:0: [sda] Stopping disk [149776.861014] PM: suspend devices took 1.407 seconds [149776.874618] ACPI: EC: interrupt blocked [149776.887621] ACPI: Preparing to enter system sleep state S3 [149776.960352] ACPI: EC: event blocked [149776.960354] ACPI: EC: EC stopped [149776.960355] PM: Saving platform NVS memory [149776.960506] Disabling non-boot CPUs ... [149776.962453] smpboot: CPU 1 is now offline [149776.964968] IRQ 30: no longer affine to CPU2 [149776.966016] smpboot: CPU 2 is now offline [149776.969445] smpboot: CPU 3 is now offline [149776.973005] smpboot: CPU 4 is now offline [149776.975830] IRQ 23: no longer affine to CPU5 [149776.976865] smpboot: CPU 5 is now offline [149776.979063] IRQ 16: no longer affine to CPU6 [149776.980106] smpboot: CPU 6 is now offline [149776.982267] IRQ 28: no longer affine to CPU7 [149776.982272] IRQ 29: no longer affine to CPU7 [149776.982278] IRQ 33: no longer affine to CPU7 [149776.983335] smpboot: CPU 7 is now offline [149776.986067] ACPI: Low-level resume complete [149776.986122] ACPI: EC: EC started [149776.986123] PM: Restoring platform NVS memory [149776.987629] Enabling non-boot CPUs ... [149776.987689] x86: Booting SMP configuration: [149776.987690] smpboot: Booting Node 0 Processor 1 APIC 0x2 [149776.991726] CPU1 is up [149776.991784] smpboot: Booting Node 0 Processor 2 APIC 0x4 [149776.995461] CPU2 is up [149776.995502] smpboot: Booting Node 0 Processor 3 APIC 0x6 [149776.999166] CPU3 is up [149776.999214] smpboot: Booting Node 0 Processor 4 APIC 0x1 [149777.002150] CPU4 is up [149777.002188] smpboot: Booting Node 0 Processor 5 APIC 0x3 [149777.004974] CPU5 is up [149777.005009] smpboot: Booting Node 0 Processor 6 APIC 0x5 [149777.007783] CPU6 is up [149777.007818] smpboot: Booting Node 0 Processor 7 APIC 0x7 [149777.010609] CPU7 is up [149777.013082] ACPI: Waking up from system sleep state S3 [149777.113738] ACPI: EC: interrupt unblocked [149777.138658] ACPI: EC: event unblocked [149777.138671] usb usb1: root hub lost power or was reset [149777.138726] usb usb3: root hub lost power or was reset [149777.138728] usb usb4: root hub lost power or was reset [149777.138785] usb usb2: root hub lost power or was reset [149777.140231] mei_me 0000:00:16.0: FW not ready: resetting. [149777.140380] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [149777.142591] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [149777.142740] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [149777.142812] sd 0:0:0:0: [sda] Starting disk [149777.142814] sd 1:0:0:0: [sdb] Starting disk [149777.156283] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149777.449609] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [149777.451693] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149777.451697] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149777.457136] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149777.457142] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149777.458957] ata3.00: configured for UDMA/133 [149777.478306] usb 2-1: reset high-speed USB device number 2 using ehci-pci [149777.478312] usb 1-1: reset high-speed USB device number 2 using ehci-pci [149777.647416] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149777.884263] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [149778.026275] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [149778.174316] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [149778.256024] PM: resume devices took 1.117 seconds [149778.256052] OOM killer enabled. [149778.256053] Restarting tasks ... done. [149778.465633] PM: suspend exit [149778.466976] Bluetooth: hci0: unexpected event for opcode 0x0000 [149779.270190] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [149779.272527] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [149779.457485] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149779.457488] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149779.507535] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [149779.516538] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149779.516540] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149779.531174] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [149779.533489] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [149779.553014] ata2.00: configured for UDMA/133 [149779.709486] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149779.709489] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149779.759545] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [149779.768539] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [149779.768542] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [149779.804937] ata1.00: configured for UDMA/133 [149780.061562] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149780.327840] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149781.043219] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149781.310068] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [149781.931822] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [149781.934064] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [149781.937569] wlp3s0: authenticated [149781.937811] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [149781.938120] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [149781.944330] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [149781.949630] wlp3s0: associated [149781.949910] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [152292.526825] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [152292.582311] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152292.850299] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152293.484308] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152293.760411] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152294.284795] PM: suspend entry (deep) [152294.977364] Filesystems sync: 0.692 seconds [152295.035951] Freezing user space processes ... (elapsed 0.002 seconds) done. [152295.038911] OOM killer disabled. [152295.038913] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [152295.039907] printk: Suspending console(s) (use no_console_suspend to debug) [152295.049834] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [152295.050947] sd 0:0:0:0: [sda] Synchronizing SCSI cache [152295.051689] sd 1:0:0:0: [sdb] Stopping disk [152295.065746] sd 0:0:0:0: [sda] Stopping disk [152296.418406] PM: suspend devices took 1.378 seconds [152296.432429] ACPI: EC: interrupt blocked [152296.445446] ACPI: Preparing to enter system sleep state S3 [152296.518176] ACPI: EC: event blocked [152296.518178] ACPI: EC: EC stopped [152296.518179] PM: Saving platform NVS memory [152296.518333] Disabling non-boot CPUs ... [152296.520270] smpboot: CPU 1 is now offline [152296.522724] IRQ 30: no longer affine to CPU2 [152296.524353] smpboot: CPU 2 is now offline [152296.527614] smpboot: CPU 3 is now offline [152296.530995] smpboot: CPU 4 is now offline [152296.533822] IRQ 23: no longer affine to CPU5 [152296.534857] smpboot: CPU 5 is now offline [152296.536954] IRQ 16: no longer affine to CPU6 [152296.538024] smpboot: CPU 6 is now offline [152296.540219] IRQ 28: no longer affine to CPU7 [152296.540224] IRQ 29: no longer affine to CPU7 [152296.540229] IRQ 33: no longer affine to CPU7 [152296.541266] smpboot: CPU 7 is now offline [152296.544113] ACPI: Low-level resume complete [152296.544201] ACPI: EC: EC started [152296.544203] PM: Restoring platform NVS memory [152296.546814] Enabling non-boot CPUs ... [152296.546916] x86: Booting SMP configuration: [152296.546919] smpboot: Booting Node 0 Processor 1 APIC 0x2 [152296.552701] CPU1 is up [152296.552807] smpboot: Booting Node 0 Processor 2 APIC 0x4 [152296.558018] CPU2 is up [152296.558092] smpboot: Booting Node 0 Processor 3 APIC 0x6 [152296.563294] CPU3 is up [152296.563400] smpboot: Booting Node 0 Processor 4 APIC 0x1 [152296.567159] CPU4 is up [152296.567224] smpboot: Booting Node 0 Processor 5 APIC 0x3 [152296.570638] CPU5 is up [152296.570699] smpboot: Booting Node 0 Processor 6 APIC 0x5 [152296.574117] CPU6 is up [152296.574175] smpboot: Booting Node 0 Processor 7 APIC 0x7 [152296.577637] CPU7 is up [152296.581654] ACPI: Waking up from system sleep state S3 [152296.596179] ACPI: EC: interrupt unblocked [152296.620207] ACPI: EC: event unblocked [152296.620260] usb usb1: root hub lost power or was reset [152296.620287] usb usb3: root hub lost power or was reset [152296.620291] usb usb4: root hub lost power or was reset [152296.620319] usb usb2: root hub lost power or was reset [152296.624204] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [152296.624233] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [152296.624377] sd 0:0:0:0: [sda] Starting disk [152296.624385] sd 1:0:0:0: [sdb] Starting disk [152296.636821] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152296.902785] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152296.935893] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [152296.937877] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152296.937883] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152296.943273] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152296.943278] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152296.945139] ata3.00: configured for UDMA/133 [152296.956432] usb 2-1: reset high-speed USB device number 2 using ehci-pci [152296.956448] usb 1-1: reset high-speed USB device number 2 using ehci-pci [152297.362423] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [152297.504418] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [152297.646390] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [152297.815041] PM: resume devices took 1.195 seconds [152297.815413] OOM killer enabled. [152297.815416] Restarting tasks ... done. [152298.032790] PM: suspend exit [152298.033427] Bluetooth: hci0: unexpected event for opcode 0x0000 [152298.757324] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [152298.758708] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [152298.767728] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152298.767732] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152298.817821] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [152298.826791] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152298.826795] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152298.863182] ata2.00: configured for UDMA/133 [152299.070321] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [152299.072644] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [152299.234567] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152299.234571] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152299.284722] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [152299.293726] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [152299.293729] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [152299.330187] ata1.00: configured for UDMA/133 [152299.536708] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152299.801796] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152300.438731] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152300.704822] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [152301.446374] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [152301.448489] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [152301.455536] wlp3s0: authenticated [152301.455647] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [152301.456259] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [152301.463471] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=7) [152301.470604] wlp3s0: associated [152301.470901] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [152326.843536] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [152326.843552] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [159324.350012] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [159324.392623] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159324.660560] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159325.247423] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159325.516112] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159325.961303] PM: suspend entry (deep) [159326.681593] Filesystems sync: 0.720 seconds [159326.738856] Freezing user space processes ... (elapsed 0.002 seconds) done. [159326.741112] OOM killer disabled. [159326.741114] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [159326.742108] printk: Suspending console(s) (use no_console_suspend to debug) [159326.752508] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [159326.752562] sd 0:0:0:0: [sda] Synchronizing SCSI cache [159326.754346] sd 1:0:0:0: [sdb] Stopping disk [159326.774323] sd 0:0:0:0: [sda] Stopping disk [159328.120365] PM: suspend devices took 1.378 seconds [159328.133493] ACPI: EC: interrupt blocked [159328.146727] ACPI: Preparing to enter system sleep state S3 [159328.288276] ACPI: EC: event blocked [159328.288277] ACPI: EC: EC stopped [159328.288278] PM: Saving platform NVS memory [159328.288376] Disabling non-boot CPUs ... [159328.290736] smpboot: CPU 1 is now offline [159328.292608] IRQ 30: no longer affine to CPU2 [159328.293630] smpboot: CPU 2 is now offline [159328.296432] smpboot: CPU 3 is now offline [159328.299391] smpboot: CPU 4 is now offline [159328.302048] IRQ 23: no longer affine to CPU5 [159328.303076] smpboot: CPU 5 is now offline [159328.305038] IRQ 16: no longer affine to CPU6 [159328.306082] smpboot: CPU 6 is now offline [159328.308275] IRQ 28: no longer affine to CPU7 [159328.308280] IRQ 29: no longer affine to CPU7 [159328.308285] IRQ 33: no longer affine to CPU7 [159328.309327] smpboot: CPU 7 is now offline [159328.312209] ACPI: Low-level resume complete [159328.312264] ACPI: EC: EC started [159328.312265] PM: Restoring platform NVS memory [159328.313814] Enabling non-boot CPUs ... [159328.313873] x86: Booting SMP configuration: [159328.313874] smpboot: Booting Node 0 Processor 1 APIC 0x2 [159328.317899] CPU1 is up [159328.318001] smpboot: Booting Node 0 Processor 2 APIC 0x4 [159328.321693] CPU2 is up [159328.321734] smpboot: Booting Node 0 Processor 3 APIC 0x6 [159328.325424] CPU3 is up [159328.325465] smpboot: Booting Node 0 Processor 4 APIC 0x1 [159328.328409] CPU4 is up [159328.328445] smpboot: Booting Node 0 Processor 5 APIC 0x3 [159328.331206] CPU5 is up [159328.331239] smpboot: Booting Node 0 Processor 6 APIC 0x5 [159328.334013] CPU6 is up [159328.334047] smpboot: Booting Node 0 Processor 7 APIC 0x7 [159328.336842] CPU7 is up [159328.339299] ACPI: Waking up from system sleep state S3 [159329.251790] ACPI: EC: interrupt unblocked [159329.276687] ACPI: EC: event unblocked [159329.276741] usb usb3: root hub lost power or was reset [159329.276743] usb usb4: root hub lost power or was reset [159329.277305] sd 0:0:0:0: [sda] Starting disk [159329.277324] sd 1:0:0:0: [sdb] Starting disk [159329.277453] usb usb1: root hub lost power or was reset [159329.277456] usb usb2: root hub lost power or was reset [159329.281352] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [159329.281353] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [159329.290686] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159329.557290] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159329.590672] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [159329.592733] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159329.592737] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159329.598132] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159329.598137] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159329.599949] ata3.00: configured for UDMA/133 [159329.619327] usb 1-1: reset high-speed USB device number 2 using ehci-pci [159329.619334] usb 2-1: reset high-speed USB device number 2 using ehci-pci [159330.025353] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [159330.168310] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [159330.310311] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [159330.478488] PM: resume devices took 1.202 seconds [159330.478526] OOM killer enabled. [159330.478527] Restarting tasks ... done. [159330.579243] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [159330.581527] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [159330.734185] PM: suspend exit [159330.735649] Bluetooth: hci0: unexpected event for opcode 0x0000 [159330.751652] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159330.751655] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159330.788237] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [159330.790509] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [159330.801672] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [159330.810662] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159330.810665] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159330.847051] ata2.00: configured for UDMA/133 [159330.973093] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159330.973097] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159331.023148] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [159331.032139] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [159331.032143] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [159331.068528] ata1.00: configured for UDMA/133 [159332.188616] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159332.454572] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159333.064239] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159333.330729] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [159333.843289] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [159333.845973] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [159333.846700] wlp3s0: authenticated [159333.847178] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [159333.850160] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [159333.852744] wlp3s0: associated [159333.899825] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [159334.237109] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [159337.628237] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [159360.494530] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [159360.494546] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [159377.813288] nouveau 0000:01:00.0: Enabling HDA controller [160052.764864] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160052.768530] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160052.785305] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [160052.799154] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [160052.799960] wlp3s0: authenticated [160052.800299] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [160053.055152] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160053.058698] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160053.070742] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [160053.085015] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [160053.099262] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [160053.656276] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160053.658063] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160053.659825] wlp3s0: authenticated [160053.661041] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [160053.663862] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [160053.684614] wlp3s0: associated [160053.862468] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [160067.491520] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [160067.543284] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [160067.820265] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [160067.965497] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160067.968184] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160067.968872] wlp3s0: authenticated [160067.968998] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [160067.999822] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [160068.002913] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [160068.021997] wlp3s0: associated [160068.032805] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [160069.434060] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [160069.701795] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [160070.229707] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160070.233797] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160070.234481] wlp3s0: authenticated [160070.236442] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [160070.288782] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [160070.291847] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [160070.312878] wlp3s0: associated [160070.390347] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [160070.686922] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [160101.511374] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [160101.530220] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [160101.534081] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [160101.535718] wlp3s0: authenticated [160101.536087] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [160101.580238] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [160101.584293] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [160101.604253] wlp3s0: associated [160101.682312] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [161896.387951] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [161896.964397] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [161896.969077] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [161896.969744] wlp3s0: authenticated [161896.970835] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [161897.072524] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [161897.075751] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [161897.096719] wlp3s0: associated [161897.174391] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [161928.398018] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [161928.417022] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [161928.421498] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [161928.423169] wlp3s0: authenticated [161928.424866] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [161928.428495] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [161928.447487] wlp3s0: associated [161928.670461] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162348.992038] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162348.996173] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162348.996958] wlp3s0: authenticated [162348.997961] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162349.001161] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [162349.020358] wlp3s0: associated [162349.057557] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162380.281487] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [162380.300760] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162380.305453] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162380.307131] wlp3s0: authenticated [162380.308857] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [162380.350427] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162380.354398] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [162380.374798] wlp3s0: associated [162380.451088] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162801.637006] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162801.641459] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162801.642255] wlp3s0: authenticated [162801.645034] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [162801.917848] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162801.921923] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162801.922628] wlp3s0: authenticated [162801.923138] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162801.927334] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [162801.947232] wlp3s0: associated [162801.947464] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162833.050826] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [162833.069700] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162833.073334] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162833.075008] wlp3s0: authenticated [162833.075501] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162833.079239] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [162833.099022] wlp3s0: associated [162833.153155] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162929.630374] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162929.650752] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162929.652119] wlp3s0: authenticated [162929.653281] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [162929.655672] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162929.658786] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [162929.677897] wlp3s0: associated [162930.372037] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [162993.953866] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [162993.972843] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [162993.977159] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [162993.979408] wlp3s0: authenticated [162993.979681] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [162994.021413] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [162994.025185] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [162994.045394] wlp3s0: associated [162994.123033] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [163386.794317] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [163386.797709] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [163386.798473] wlp3s0: authenticated [163386.798931] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [163386.801924] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [163386.820799] wlp3s0: associated [163386.863186] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [163420.135477] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [163420.154347] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [163420.158260] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [163420.159938] wlp3s0: authenticated [163420.160337] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [163420.202347] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [163420.206072] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=10) [163420.225390] wlp3s0: associated [163420.304243] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [164685.742265] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [164685.745920] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164685.746604] wlp3s0: authenticated [164685.747208] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [164685.750290] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [164685.770291] wlp3s0: associated [164685.784417] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [164717.012892] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [164717.031630] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [164717.035340] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164717.036953] wlp3s0: authenticated [164717.037625] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [164717.041340] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=15) [164717.060775] wlp3s0: associated [164717.074542] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [166038.940124] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [166038.944586] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [166038.945277] wlp3s0: authenticated [166038.948773] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [166038.951989] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [166038.970970] wlp3s0: associated [166039.181643] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [166072.484567] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [166072.489092] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [166072.489788] wlp3s0: authenticated [166072.493144] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [166072.496258] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [166072.515329] wlp3s0: associated [166072.518932] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [167269.138974] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [167269.142937] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [167269.156999] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [167269.171860] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [167269.185324] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [167269.372110] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [167269.374179] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [167269.375002] wlp3s0: authenticated [167269.376633] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [167269.379826] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [167269.398785] wlp3s0: associated [167269.705848] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [167302.774092] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [167302.793349] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [167302.797721] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [167302.799448] wlp3s0: authenticated [167302.801019] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [167302.804671] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=11) [167302.823957] wlp3s0: associated [167302.832777] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [167395.953510] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [167396.005875] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167396.273871] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167396.795234] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167397.072092] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167397.591948] PM: suspend entry (deep) [167398.210641] Filesystems sync: 0.618 seconds [167398.267476] Freezing user space processes ... (elapsed 0.002 seconds) done. [167398.270360] OOM killer disabled. [167398.270362] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [167398.271359] printk: Suspending console(s) (use no_console_suspend to debug) [167398.278386] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [167398.280252] sd 1:0:0:0: [sdb] Stopping disk [167398.282319] sd 0:0:0:0: [sda] Synchronizing SCSI cache [167398.335025] sd 0:0:0:0: [sda] Stopping disk [167399.684774] PM: suspend devices took 1.413 seconds [167399.698895] ACPI: EC: interrupt blocked [167399.711894] ACPI: Preparing to enter system sleep state S3 [167399.784626] ACPI: EC: event blocked [167399.784628] ACPI: EC: EC stopped [167399.784629] PM: Saving platform NVS memory [167399.784784] Disabling non-boot CPUs ... [167399.786756] smpboot: CPU 1 is now offline [167399.789304] IRQ 30: no longer affine to CPU2 [167399.790346] smpboot: CPU 2 is now offline [167399.793717] smpboot: CPU 3 is now offline [167399.797236] smpboot: CPU 4 is now offline [167399.800179] IRQ 23: no longer affine to CPU5 [167399.801231] smpboot: CPU 5 is now offline [167399.803389] IRQ 16: no longer affine to CPU6 [167399.804431] smpboot: CPU 6 is now offline [167399.806639] IRQ 28: no longer affine to CPU7 [167399.806644] IRQ 29: no longer affine to CPU7 [167399.806650] IRQ 33: no longer affine to CPU7 [167399.807772] smpboot: CPU 7 is now offline [167399.810508] ACPI: Low-level resume complete [167399.810563] ACPI: EC: EC started [167399.810564] PM: Restoring platform NVS memory [167399.812100] Enabling non-boot CPUs ... [167399.812160] x86: Booting SMP configuration: [167399.812162] smpboot: Booting Node 0 Processor 1 APIC 0x2 [167399.816201] CPU1 is up [167399.816258] smpboot: Booting Node 0 Processor 2 APIC 0x4 [167399.819939] CPU2 is up [167399.819978] smpboot: Booting Node 0 Processor 3 APIC 0x6 [167399.823663] CPU3 is up [167399.823703] smpboot: Booting Node 0 Processor 4 APIC 0x1 [167399.826641] CPU4 is up [167399.826677] smpboot: Booting Node 0 Processor 5 APIC 0x3 [167399.829443] CPU5 is up [167399.829482] smpboot: Booting Node 0 Processor 6 APIC 0x5 [167399.832267] CPU6 is up [167399.832301] smpboot: Booting Node 0 Processor 7 APIC 0x7 [167399.835098] CPU7 is up [167399.837555] ACPI: Waking up from system sleep state S3 [167400.757996] ACPI: EC: interrupt unblocked [167400.781911] ACPI: EC: event unblocked [167400.781949] usb usb1: root hub lost power or was reset [167400.781951] usb usb3: root hub lost power or was reset [167400.781953] usb usb4: root hub lost power or was reset [167400.782101] usb usb2: root hub lost power or was reset [167400.785860] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [167400.786008] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [167400.792075] sd 0:0:0:0: [sda] Starting disk [167400.792150] sd 1:0:0:0: [sdb] Starting disk [167400.799539] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167401.067902] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167401.103104] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [167401.105193] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167401.105197] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167401.110646] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167401.110649] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167401.112324] ata3.00: configured for UDMA/133 [167401.123539] usb 2-1: reset high-speed USB device number 2 using ehci-pci [167401.123545] usb 1-1: reset high-speed USB device number 2 using ehci-pci [167401.529523] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [167401.677531] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [167401.821510] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [167401.901693] PM: resume devices took 1.120 seconds [167401.901735] OOM killer enabled. [167401.901736] Restarting tasks ... done. [167402.038463] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [167402.040085] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [167402.049187] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167402.049193] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167402.099770] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [167402.106088] PM: suspend exit [167402.107239] Bluetooth: hci0: unexpected event for opcode 0x0000 [167402.108784] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167402.108791] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167402.145251] ata2.00: configured for UDMA/133 [167402.298497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [167402.301256] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [167402.507368] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167402.507376] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167402.558098] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [167402.567251] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [167402.567260] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [167402.603796] ata1.00: configured for UDMA/133 [167403.580812] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167403.847337] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167404.449800] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167404.714813] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [167405.234620] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [167405.236907] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [167405.237550] wlp3s0: authenticated [167405.238375] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [167405.241492] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=19) [167405.243631] wlp3s0: associated [167405.293023] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [167405.671286] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [167408.345460] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [167431.217312] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [167431.217326] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [168221.269570] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [168221.272649] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [168221.273291] wlp3s0: authenticated [168221.273364] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [168221.353833] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [168221.356860] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [168221.360649] wlp3s0: associated [168221.455350] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [168252.782170] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [168252.785112] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [168252.789331] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [168252.790983] wlp3s0: authenticated [168252.791281] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [168252.794912] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=22) [168252.797623] wlp3s0: associated [168252.846925] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [170113.512897] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [170114.071936] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [170114.075212] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [170114.075889] wlp3s0: authenticated [170114.076925] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [170114.083533] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [170114.086764] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [170114.091200] wlp3s0: associated [170114.185874] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [170145.409532] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [170145.412655] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [170145.416812] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [170145.418469] wlp3s0: authenticated [170145.418997] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [170145.422718] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=31) [170145.425425] wlp3s0: associated [170145.471431] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [170225.172328] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [170225.175155] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [170225.175869] wlp3s0: authenticated [170225.176699] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [170225.186558] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [170225.189741] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [170225.194180] wlp3s0: associated [170225.288032] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [170256.511826] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [170256.514766] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [170256.518887] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [170256.520960] wlp3s0: authenticated [170256.521934] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [170256.525515] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=31) [170256.528382] wlp3s0: associated [170256.573546] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [172035.248924] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [172035.809829] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [172035.812967] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [172035.826067] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [172035.841231] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [172035.842030] wlp3s0: authenticated [172035.842484] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [172035.845772] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [172035.850155] wlp3s0: associated [172035.997178] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [172067.221717] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [172067.225056] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [172067.229065] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [172067.230662] wlp3s0: authenticated [172067.231033] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [172067.281924] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [172067.285597] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=34) [172067.289211] wlp3s0: associated [172067.384023] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [173034.833954] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [173034.882002] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173035.159426] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173035.693757] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173035.971155] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173040.976436] nouveau 0000:01:00.0: Enabling HDA controller [173041.286952] PM: suspend entry (deep) [173041.662681] Filesystems sync: 0.375 seconds [173041.719396] Freezing user space processes ... (elapsed 0.002 seconds) done. [173041.722085] OOM killer disabled. [173041.722086] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [173041.723515] printk: Suspending console(s) (use no_console_suspend to debug) [173041.734534] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [173041.736340] sd 1:0:0:0: [sdb] Stopping disk [173041.738425] sd 0:0:0:0: [sda] Synchronizing SCSI cache [173041.764409] sd 0:0:0:0: [sda] Stopping disk [173043.112882] PM: suspend devices took 1.389 seconds [173043.127081] ACPI: EC: interrupt blocked [173043.140895] ACPI: Preparing to enter system sleep state S3 [173043.213812] ACPI: EC: event blocked [173043.213814] ACPI: EC: EC stopped [173043.213815] PM: Saving platform NVS memory [173043.213943] Disabling non-boot CPUs ... [173043.216478] smpboot: CPU 1 is now offline [173043.218886] IRQ 30: no longer affine to CPU2 [173043.219920] smpboot: CPU 2 is now offline [173043.223192] smpboot: CPU 3 is now offline [173043.226649] smpboot: CPU 4 is now offline [173043.228938] IRQ 23: no longer affine to CPU5 [173043.229976] smpboot: CPU 5 is now offline [173043.232282] IRQ 16: no longer affine to CPU6 [173043.233321] smpboot: CPU 6 is now offline [173043.235505] IRQ 28: no longer affine to CPU7 [173043.235510] IRQ 29: no longer affine to CPU7 [173043.235515] IRQ 33: no longer affine to CPU7 [173043.236548] smpboot: CPU 7 is now offline [173043.239530] ACPI: Low-level resume complete [173043.239620] ACPI: EC: EC started [173043.239621] PM: Restoring platform NVS memory [173043.242196] Enabling non-boot CPUs ... [173043.242300] x86: Booting SMP configuration: [173043.242303] smpboot: Booting Node 0 Processor 1 APIC 0x2 [173043.248131] CPU1 is up [173043.248316] smpboot: Booting Node 0 Processor 2 APIC 0x4 [173043.253567] CPU2 is up [173043.253743] smpboot: Booting Node 0 Processor 3 APIC 0x6 [173043.258967] CPU3 is up [173043.259054] smpboot: Booting Node 0 Processor 4 APIC 0x1 [173043.262819] CPU4 is up [173043.262885] smpboot: Booting Node 0 Processor 5 APIC 0x3 [173043.266300] CPU5 is up [173043.266361] smpboot: Booting Node 0 Processor 6 APIC 0x5 [173043.269795] CPU6 is up [173043.269855] smpboot: Booting Node 0 Processor 7 APIC 0x7 [173043.273333] CPU7 is up [173043.277335] ACPI: Waking up from system sleep state S3 [173044.124791] ACPI: EC: interrupt unblocked [173044.148776] ACPI: EC: event unblocked [173044.148864] usb usb1: root hub lost power or was reset [173044.148869] usb usb3: root hub lost power or was reset [173044.148873] usb usb2: root hub lost power or was reset [173044.148875] usb usb4: root hub lost power or was reset [173044.152771] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [173044.152800] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [173044.153091] mei_me 0000:00:16.0: FW not ready: resetting. [173044.153110] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [173044.153191] sd 0:0:0:0: [sda] Starting disk [173044.153199] sd 1:0:0:0: [sdb] Starting disk [173044.166451] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173044.432460] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [173044.460479] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [173044.462532] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173044.462538] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173044.467950] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173044.467955] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173044.469781] ata3.00: configured for UDMA/133 [173044.489063] usb 1-1: reset high-speed USB device number 2 using ehci-pci [173044.489078] usb 2-1: reset high-speed USB device number 2 using ehci-pci [173044.895101] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [173045.039022] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [173045.187025] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [173045.267370] PM: resume devices took 1.119 seconds [173045.267408] OOM killer enabled. [173045.267409] Restarting tasks ... done. [173045.525428] PM: suspend exit [173045.525971] Bluetooth: hci0: unexpected event for opcode 0x0000 [173045.551958] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [173045.554392] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [173045.740388] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173045.740393] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173045.759952] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [173045.762273] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [173045.790376] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [173045.799362] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173045.799364] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173045.835785] ata2.00: configured for UDMA/133 [173045.934153] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173045.934160] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173045.984243] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [173045.993249] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [173045.993260] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [173046.029701] ata1.00: configured for UDMA/133 [173046.834421] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [173046.835640] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [173046.837241] wlp3s0: authenticated [173046.837922] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [173046.840674] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=34) [173046.859530] wlp3s0: associated [173046.871380] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [173047.220842] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [173648.631862] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [173648.635434] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [173648.649730] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [173648.654031] wlp3s0: authenticated [173648.654240] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [173649.294129] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [173649.295549] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [173649.296266] wlp3s0: authenticated [173649.296460] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [173649.341502] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [173649.344850] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [173649.365858] wlp3s0: associated [173649.443023] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [173680.666389] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [173680.685374] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [173680.689655] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [173680.691270] wlp3s0: authenticated [173680.691867] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [173680.695490] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=42) [173680.714232] wlp3s0: associated [173680.716179] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [175457.413403] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [175457.990418] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175457.995106] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175457.995825] wlp3s0: authenticated [175457.997089] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [175458.092748] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [175458.096015] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [175458.117391] wlp3s0: associated [175458.194084] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [175489.419380] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [175489.438390] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175489.442779] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175489.444433] wlp3s0: authenticated [175489.445084] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [175489.478147] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [175489.481878] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=46) [175489.501864] wlp3s0: associated [175489.579554] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [175642.413551] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175642.417195] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175642.418026] wlp3s0: authenticated [175642.418868] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [175642.421253] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [175642.424545] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [175642.446082] wlp3s0: associated [175642.624798] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [175673.644449] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [175673.663486] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175673.667338] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175673.669034] wlp3s0: authenticated [175673.669703] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [175673.673411] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=49) [175673.692841] wlp3s0: associated [175673.793821] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [175975.244088] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175975.248013] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175975.248783] wlp3s0: authenticated [175975.250004] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [175975.539652] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [175975.541166] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [175975.541950] wlp3s0: authenticated [175975.542127] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [175975.624089] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [175975.627228] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [175975.648305] wlp3s0: associated [175975.726262] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [176006.953950] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [176006.973213] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [176006.977375] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [176006.979081] wlp3s0: authenticated [176006.980469] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [176006.984126] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=48) [176007.003661] wlp3s0: associated [176007.099792] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [177093.416367] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [177093.419850] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [177093.420516] wlp3s0: authenticated [177093.420629] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [177093.506126] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [177093.509335] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [177093.528596] wlp3s0: associated [177093.608058] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [177124.831920] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [177124.850979] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [177124.854893] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [177124.870928] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [177124.885500] wlp3s0: authenticated [177124.886116] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [177125.181020] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [177125.184399] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [177125.185239] wlp3s0: authenticated [177125.188451] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [177125.289575] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [177125.292912] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=52) [177125.313923] wlp3s0: associated [177125.389955] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [178899.974078] Rekeying PTK for STA XX:XX:XX:XX:XX:XX but driver can't safely do that. [180228.349740] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180228.353948] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180228.354706] wlp3s0: authenticated [180228.355293] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [180228.414223] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180228.417862] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [180228.438417] wlp3s0: associated [180228.516460] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [180259.740258] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [180259.759678] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180259.764247] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180259.766231] wlp3s0: authenticated [180259.767616] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180259.771461] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=58) [180259.791218] wlp3s0: associated [180259.797493] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [180653.308382] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180653.321428] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180653.322219] wlp3s0: authenticated [180653.323485] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [180653.367275] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180653.370497] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [180653.391476] wlp3s0: associated [180653.468870] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [180684.896307] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [180684.915950] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180684.919524] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180684.921361] wlp3s0: authenticated [180684.921606] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180684.925274] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=61) [180684.943913] wlp3s0: associated [180684.954523] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [180808.430427] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180808.434386] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180808.435889] wlp3s0: authenticated [180808.436003] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [180808.514316] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180808.517406] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [180808.538753] wlp3s0: associated [180808.616667] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [180839.840649] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [180839.866215] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [180839.883240] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [180839.890347] wlp3s0: authenticated [180839.890700] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [180839.900982] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=61) [180839.925931] wlp3s0: associated [180839.986069] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182406.296081] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182406.300840] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182406.301518] wlp3s0: authenticated [182406.302312] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [182406.321398] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182406.324630] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [182406.345919] wlp3s0: associated [182406.423595] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182437.544851] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [182437.563544] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182437.567335] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182437.568962] wlp3s0: authenticated [182437.569403] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [182437.601808] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182437.605589] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=67) [182437.626008] wlp3s0: associated [182437.908902] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182716.982430] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182716.986449] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182716.987223] wlp3s0: authenticated [182716.990346] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [182716.997560] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182717.000669] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [182717.019626] wlp3s0: associated [182717.202189] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182750.372818] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [182750.392427] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182750.397567] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182750.399263] wlp3s0: authenticated [182750.400298] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [182750.428997] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182750.432730] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=69) [182750.453106] wlp3s0: associated [182750.632897] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182905.532647] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182905.536348] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182905.537072] wlp3s0: authenticated [182905.538102] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [182905.615056] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182905.618190] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [182905.639096] wlp3s0: associated [182905.717162] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [182936.461982] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [182936.466433] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [182936.467125] wlp3s0: authenticated [182936.467434] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [182936.470625] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=73) [182936.491831] wlp3s0: associated [182936.792797] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [183872.480917] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [183872.538304] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183872.806097] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183873.342305] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183873.619832] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183874.057962] PM: suspend entry (deep) [183875.757385] Filesystems sync: 1.699 seconds [183875.813874] Freezing user space processes ... (elapsed 0.024 seconds) done. [183875.838260] OOM killer disabled. [183875.838262] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [183875.839781] printk: Suspending console(s) (use no_console_suspend to debug) [183875.849799] sd 0:0:0:0: [sda] Synchronizing SCSI cache [183875.849898] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [183875.851277] sd 0:0:0:0: [sda] Stopping disk [183875.851741] sd 1:0:0:0: [sdb] Stopping disk [183877.199337] PM: suspend devices took 1.359 seconds [183877.213428] ACPI: EC: interrupt blocked [183877.227249] ACPI: Preparing to enter system sleep state S3 [183877.300127] ACPI: EC: event blocked [183877.300129] ACPI: EC: EC stopped [183877.300130] PM: Saving platform NVS memory [183877.300285] Disabling non-boot CPUs ... [183877.302219] smpboot: CPU 1 is now offline [183877.304981] IRQ 30: no longer affine to CPU2 [183877.306003] smpboot: CPU 2 is now offline [183877.309696] smpboot: CPU 3 is now offline [183877.312708] smpboot: CPU 4 is now offline [183877.315398] IRQ 23: no longer affine to CPU5 [183877.316431] smpboot: CPU 5 is now offline [183877.318581] IRQ 16: no longer affine to CPU6 [183877.319634] smpboot: CPU 6 is now offline [183877.321959] IRQ 28: no longer affine to CPU7 [183877.321964] IRQ 29: no longer affine to CPU7 [183877.321970] IRQ 33: no longer affine to CPU7 [183877.323000] smpboot: CPU 7 is now offline [183877.325757] ACPI: Low-level resume complete [183877.325813] ACPI: EC: EC started [183877.325814] PM: Restoring platform NVS memory [183877.327336] Enabling non-boot CPUs ... [183877.327394] x86: Booting SMP configuration: [183877.327395] smpboot: Booting Node 0 Processor 1 APIC 0x2 [183877.331415] CPU1 is up [183877.331517] smpboot: Booting Node 0 Processor 2 APIC 0x4 [183877.335198] CPU2 is up [183877.335238] smpboot: Booting Node 0 Processor 3 APIC 0x6 [183877.338912] CPU3 is up [183877.338953] smpboot: Booting Node 0 Processor 4 APIC 0x1 [183877.341834] CPU4 is up [183877.341870] smpboot: Booting Node 0 Processor 5 APIC 0x3 [183877.344637] CPU5 is up [183877.344672] smpboot: Booting Node 0 Processor 6 APIC 0x5 [183877.347440] CPU6 is up [183877.347473] smpboot: Booting Node 0 Processor 7 APIC 0x7 [183877.350256] CPU7 is up [183877.352692] ACPI: Waking up from system sleep state S3 [183877.453540] ACPI: EC: interrupt unblocked [183877.478415] ACPI: EC: event unblocked [183877.478475] usb usb3: root hub lost power or was reset [183877.478477] usb usb4: root hub lost power or was reset [183877.478580] usb usb1: root hub lost power or was reset [183877.480152] usb usb2: root hub lost power or was reset [183877.482483] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [183877.484068] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [183877.488655] sd 0:0:0:0: [sda] Starting disk [183877.488695] sd 1:0:0:0: [sdb] Starting disk [183877.493427] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183877.760146] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183877.801574] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [183877.803573] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183877.803577] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183877.809029] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183877.809032] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183877.810820] ata3.00: configured for UDMA/133 [183877.814046] usb 1-1: reset high-speed USB device number 2 using ehci-pci [183877.822055] usb 2-1: reset high-speed USB device number 2 using ehci-pci [183878.220114] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [183878.364071] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [183878.512069] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [183878.592502] PM: resume devices took 1.114 seconds [183878.592541] OOM killer enabled. [183878.592542] Restarting tasks ... done. [183878.828539] PM: suspend exit [183878.829810] Bluetooth: hci0: unexpected event for opcode 0x0000 [183879.569014] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [183879.570602] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [183879.579660] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183879.579667] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183879.630073] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [183879.639081] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183879.639087] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183879.675494] ata2.00: configured for UDMA/133 [183879.834018] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [183879.836681] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [183880.011934] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183880.011943] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183880.062417] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [183880.071551] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [183880.071557] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [183880.108199] ata1.00: configured for UDMA/133 [183880.473379] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183880.739410] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183881.361482] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183881.630026] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [183882.157501] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [183882.160289] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [183882.160916] wlp3s0: authenticated [183882.161916] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [183882.164896] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [183882.185480] wlp3s0: associated [183882.204279] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [183882.575020] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [183907.355975] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [183907.355990] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [184132.496533] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [184132.499945] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [184132.500676] wlp3s0: authenticated [184132.501117] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [184132.522060] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [184132.525301] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [184132.546151] wlp3s0: associated [184132.623220] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [184164.052082] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [184164.071500] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [184164.076431] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [184164.078041] wlp3s0: authenticated [184164.079498] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [184164.083071] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=3) [184164.102528] wlp3s0: associated [184164.106882] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [184726.629101] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [184726.691034] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184726.967831] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184727.499775] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184727.777658] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184728.332749] PM: suspend entry (deep) [184732.485274] Filesystems sync: 4.152 seconds [184732.542743] Freezing user space processes ... (elapsed 0.002 seconds) done. [184732.545528] OOM killer disabled. [184732.545530] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [184732.546502] printk: Suspending console(s) (use no_console_suspend to debug) [184732.559466] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [184732.559544] sd 0:0:0:0: [sda] Synchronizing SCSI cache [184732.561344] sd 1:0:0:0: [sdb] Stopping disk [184732.636574] sd 0:0:0:0: [sda] Stopping disk [184733.980672] PM: suspend devices took 1.434 seconds [184733.994072] ACPI: EC: interrupt blocked [184734.007918] ACPI: Preparing to enter system sleep state S3 [184734.080792] ACPI: EC: event blocked [184734.080793] ACPI: EC: EC stopped [184734.080795] PM: Saving platform NVS memory [184734.080950] Disabling non-boot CPUs ... [184734.082892] smpboot: CPU 1 is now offline [184734.085402] IRQ 30: no longer affine to CPU2 [184734.086443] smpboot: CPU 2 is now offline [184734.089818] smpboot: CPU 3 is now offline [184734.093267] smpboot: CPU 4 is now offline [184734.096209] IRQ 23: no longer affine to CPU5 [184734.097242] smpboot: CPU 5 is now offline [184734.099323] IRQ 16: no longer affine to CPU6 [184734.100363] smpboot: CPU 6 is now offline [184734.102597] IRQ 28: no longer affine to CPU7 [184734.102602] IRQ 29: no longer affine to CPU7 [184734.102608] IRQ 33: no longer affine to CPU7 [184734.103665] smpboot: CPU 7 is now offline [184734.106676] ACPI: Low-level resume complete [184734.106768] ACPI: EC: EC started [184734.106769] PM: Restoring platform NVS memory [184734.109375] Enabling non-boot CPUs ... [184734.109479] x86: Booting SMP configuration: [184734.109482] smpboot: Booting Node 0 Processor 1 APIC 0x2 [184734.115279] CPU1 is up [184734.115388] smpboot: Booting Node 0 Processor 2 APIC 0x4 [184734.120605] CPU2 is up [184734.120678] smpboot: Booting Node 0 Processor 3 APIC 0x6 [184734.125895] CPU3 is up [184734.126004] smpboot: Booting Node 0 Processor 4 APIC 0x1 [184734.129782] CPU4 is up [184734.129846] smpboot: Booting Node 0 Processor 5 APIC 0x3 [184734.133245] CPU5 is up [184734.133308] smpboot: Booting Node 0 Processor 6 APIC 0x5 [184734.136726] CPU6 is up [184734.136782] smpboot: Booting Node 0 Processor 7 APIC 0x7 [184734.140240] CPU7 is up [184734.144256] ACPI: Waking up from system sleep state S3 [184734.158801] ACPI: EC: interrupt unblocked [184734.182878] ACPI: EC: event unblocked [184734.182919] usb usb3: root hub lost power or was reset [184734.182923] usb usb4: root hub lost power or was reset [184734.182937] usb usb1: root hub lost power or was reset [184734.183190] usb usb2: root hub lost power or was reset [184734.186853] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [184734.187130] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [184734.193074] sd 1:0:0:0: [sdb] Starting disk [184734.193138] sd 0:0:0:0: [sda] Starting disk [184734.200546] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184734.508500] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [184734.510567] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184734.510573] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184734.515930] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184734.515936] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184734.517760] ata3.00: configured for UDMA/133 [184734.521091] usb 1-1: reset high-speed USB device number 2 using ehci-pci [184734.521094] usb 2-1: reset high-speed USB device number 2 using ehci-pci [184734.691403] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184734.927033] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [184735.075042] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [184735.217076] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [184735.300229] PM: resume devices took 1.118 seconds [184735.300280] OOM killer enabled. [184735.300282] Restarting tasks ... done. [184735.507168] PM: suspend exit [184735.508234] Bluetooth: hci0: unexpected event for opcode 0x0000 [184736.382948] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [184736.385290] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [184736.557194] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184736.557198] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184736.588944] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [184736.591266] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [184736.607504] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [184736.616515] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184736.616521] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184736.652937] ata2.00: configured for UDMA/133 [184736.791042] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184736.791050] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184736.841503] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [184736.850604] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [184736.850615] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [184736.887129] ata1.00: configured for UDMA/133 [184737.222485] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184737.497854] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184738.129883] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184738.406541] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [184738.913910] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [184738.916937] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [184738.917759] wlp3s0: authenticated [184738.919905] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [184738.923296] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [184738.943556] wlp3s0: associated [184739.038624] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [184739.336449] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [184765.108763] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [184765.108778] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [186137.694166] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186137.698374] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186137.712542] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [186137.713908] wlp3s0: authenticated [186137.714127] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [186138.011677] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186138.013011] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186138.013791] wlp3s0: authenticated [186138.015063] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [186138.082625] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [186138.085839] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [186138.106785] wlp3s0: associated [186138.184802] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [186169.409348] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [186169.428468] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186169.432921] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186169.434741] wlp3s0: authenticated [186169.437031] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [186169.440725] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [186169.460024] wlp3s0: associated [186169.542101] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [186691.621065] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186691.625455] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186691.626136] wlp3s0: authenticated [186691.626798] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [186691.647415] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [186691.650597] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [186691.671813] wlp3s0: associated [186691.749531] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [186722.973352] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [186722.992479] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [186722.996345] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [186722.998143] wlp3s0: authenticated [186722.998688] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [186723.004805] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [186723.008502] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [186723.028164] wlp3s0: associated [186723.106492] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [187334.598231] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [187334.601974] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [187334.602719] wlp3s0: authenticated [187334.604926] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [187334.605500] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [187334.608643] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [187334.627865] wlp3s0: associated [187334.707713] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [187367.979969] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [187367.999412] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [187368.003778] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [187368.005467] wlp3s0: authenticated [187368.006895] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [187368.010510] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [187368.029610] wlp3s0: associated [187368.214780] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [187420.730545] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [187420.735550] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [187420.736298] wlp3s0: authenticated [187420.738040] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [187420.824940] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [187420.828006] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [187420.847534] wlp3s0: associated [187420.927038] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [187452.151760] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [187452.171154] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [187452.175425] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [187452.177056] wlp3s0: authenticated [187452.178315] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [187452.181945] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [187452.200738] wlp3s0: associated [187452.283642] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [187886.596734] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [187886.599500] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [187886.601237] wlp3s0: authenticated [187886.602316] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [187886.606218] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [187886.626730] wlp3s0: associated [187886.656531] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [189788.551004] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 23=IEEE8021X_FAILED) [189798.251145] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [189798.254827] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [189798.269481] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [189798.285172] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [189798.292321] wlp3s0: authenticated [189798.293345] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [189798.296419] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [189798.317176] wlp3s0: associated [189798.408284] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [189829.632147] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [189829.651352] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [189829.656111] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [189829.657792] wlp3s0: authenticated [189829.659718] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [189829.663358] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [189829.682231] wlp3s0: associated [189829.763778] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [189891.569006] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [189891.573635] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [189891.574301] wlp3s0: authenticated [189891.574453] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [189891.592576] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [189891.595635] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [189891.616567] wlp3s0: associated [189891.692978] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [189923.123004] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [189923.142947] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [189923.146814] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [189923.148516] wlp3s0: authenticated [189923.149096] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [189923.150973] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [189923.154575] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [189923.173701] wlp3s0: associated [189923.253159] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [190547.989076] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [190548.042707] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190548.309677] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190548.849677] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190549.120702] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190549.622202] PM: suspend entry (deep) [190550.304491] Filesystems sync: 0.682 seconds [190550.362301] Freezing user space processes ... (elapsed 0.002 seconds) done. [190550.365121] OOM killer disabled. [190550.365122] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [190550.366256] printk: Suspending console(s) (use no_console_suspend to debug) [190550.382268] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [190550.382320] sd 0:0:0:0: [sda] Synchronizing SCSI cache [190550.384166] sd 1:0:0:0: [sdb] Stopping disk [190550.419923] sd 0:0:0:0: [sda] Stopping disk [190551.773007] PM: suspend devices took 1.406 seconds [190551.786974] ACPI: EC: interrupt blocked [190551.800813] ACPI: Preparing to enter system sleep state S3 [190551.873558] ACPI: EC: event blocked [190551.873560] ACPI: EC: EC stopped [190551.873561] PM: Saving platform NVS memory [190551.873713] Disabling non-boot CPUs ... [190551.875667] smpboot: CPU 1 is now offline [190551.878611] IRQ 30: no longer affine to CPU2 [190551.879642] smpboot: CPU 2 is now offline [190551.883548] smpboot: CPU 3 is now offline [190551.887935] smpboot: CPU 4 is now offline [190551.890264] IRQ 23: no longer affine to CPU5 [190551.891292] smpboot: CPU 5 is now offline [190551.893416] IRQ 16: no longer affine to CPU6 [190551.894471] smpboot: CPU 6 is now offline [190551.896767] IRQ 28: no longer affine to CPU7 [190551.896772] IRQ 29: no longer affine to CPU7 [190551.896777] IRQ 33: no longer affine to CPU7 [190551.897836] smpboot: CPU 7 is now offline [190551.900826] ACPI: Low-level resume complete [190551.900915] ACPI: EC: EC started [190551.900917] PM: Restoring platform NVS memory [190551.903536] Enabling non-boot CPUs ... [190551.903638] x86: Booting SMP configuration: [190551.903641] smpboot: Booting Node 0 Processor 1 APIC 0x2 [190551.909429] CPU1 is up [190551.909536] smpboot: Booting Node 0 Processor 2 APIC 0x4 [190551.914714] CPU2 is up [190551.914812] smpboot: Booting Node 0 Processor 3 APIC 0x6 [190551.920029] CPU3 is up [190551.920199] smpboot: Booting Node 0 Processor 4 APIC 0x1 [190551.923962] CPU4 is up [190551.924028] smpboot: Booting Node 0 Processor 5 APIC 0x3 [190551.927473] CPU5 is up [190551.927542] smpboot: Booting Node 0 Processor 6 APIC 0x5 [190551.930974] CPU6 is up [190551.931034] smpboot: Booting Node 0 Processor 7 APIC 0x7 [190551.934504] CPU7 is up [190551.938538] ACPI: Waking up from system sleep state S3 [190551.953576] ACPI: EC: interrupt unblocked [190551.977555] ACPI: EC: event unblocked [190551.977621] usb usb1: root hub lost power or was reset [190551.977642] usb usb2: root hub lost power or was reset [190551.977646] usb usb3: root hub lost power or was reset [190551.977648] usb usb4: root hub lost power or was reset [190551.981526] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [190551.981555] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [190551.987694] sd 1:0:0:0: [sdb] Starting disk [190551.987749] sd 0:0:0:0: [sda] Starting disk [190551.995205] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190552.296195] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [190552.298341] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190552.298347] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190552.303685] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190552.303690] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190552.305463] ata3.00: configured for UDMA/133 [190552.316863] usb 2-1: reset high-speed USB device number 2 using ehci-pci [190552.316876] usb 1-1: reset high-speed USB device number 2 using ehci-pci [190552.485238] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190552.722851] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [190552.866784] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [190553.008790] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [190553.177275] PM: resume devices took 1.200 seconds [190553.177343] OOM killer enabled. [190553.177344] Restarting tasks ... done. [190553.383962] PM: suspend exit [190553.384841] Bluetooth: hci0: unexpected event for opcode 0x0000 [190554.169743] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [190554.172371] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [190554.342793] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190554.342797] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190554.392991] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [190554.401977] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190554.401980] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190554.437708] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [190554.438410] ata2.00: configured for UDMA/133 [190554.440047] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [190554.636594] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190554.636597] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190554.686715] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [190554.695703] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [190554.695705] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [190554.732156] ata1.00: configured for UDMA/133 [190555.042083] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190555.307178] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190555.910063] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190556.176193] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190556.690358] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [190556.692755] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [190556.693411] wlp3s0: authenticated [190556.693645] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [190556.696648] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [190556.715520] wlp3s0: associated [190556.756058] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [190557.133222] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [190582.874423] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [190582.874438] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [190716.067875] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [190716.072826] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [190716.073495] wlp3s0: authenticated [190716.073847] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [190716.324130] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [190716.325816] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [190716.326580] wlp3s0: authenticated [190716.326764] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [190716.432024] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [190716.435546] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [190716.455228] wlp3s0: associated [190716.530329] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [190731.625176] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [190731.675175] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190731.952578] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190732.610178] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190732.878324] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [190733.405487] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [190733.409579] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [190733.410312] wlp3s0: authenticated [190733.411419] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [190733.496697] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [190733.499870] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [190733.520065] wlp3s0: associated [190733.598167] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [190733.893326] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [191548.055356] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [191548.058938] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [191548.059677] wlp3s0: authenticated [191548.059922] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [191548.158650] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [191548.161944] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [191548.182965] wlp3s0: associated [191548.260869] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [191579.383517] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [191579.402702] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [191579.407199] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [191579.408783] wlp3s0: authenticated [191579.409937] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [191579.511835] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [191579.515599] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=9) [191579.535719] wlp3s0: associated [191579.714762] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192216.351916] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [192216.425380] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [192216.702910] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [192217.250045] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [192217.517782] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [192218.040562] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192218.044080] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192218.046365] wlp3s0: authenticated [192218.047162] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192218.158201] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [192218.159847] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [192218.159867] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [192218.350909] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192218.354111] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192218.354888] wlp3s0: authenticated [192218.355560] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [192218.366144] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192218.367654] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [192218.367662] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [192218.555994] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192218.557907] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192218.558702] wlp3s0: authenticated [192218.558964] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [192218.622182] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192218.623677] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [192218.623686] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [192218.776445] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192218.780032] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192218.780792] wlp3s0: authenticated [192218.781143] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192218.783062] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [192218.783070] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [192218.931263] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192218.933053] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192218.933806] wlp3s0: authenticated [192218.934146] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192218.937908] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [192218.958368] wlp3s0: associated [192218.993326] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192219.360045] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [192250.116062] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [192250.135295] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192250.138221] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192250.139939] wlp3s0: authenticated [192250.140579] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192250.144417] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [192250.163797] wlp3s0: associated [192250.330619] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192264.394571] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192264.398059] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192264.398895] wlp3s0: authenticated [192264.400310] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192264.403495] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [192264.422474] wlp3s0: associated [192264.444237] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192297.204362] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [192297.224458] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192297.229175] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192297.230777] wlp3s0: authenticated [192297.231027] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [192297.331740] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192297.335502] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [192297.354832] wlp3s0: associated [192297.433751] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192513.706943] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192513.710734] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192513.711432] wlp3s0: authenticated [192513.712726] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192513.715735] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [192513.734892] wlp3s0: associated [192513.783900] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192544.905865] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [192544.926032] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [192544.930485] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [192544.932168] wlp3s0: authenticated [192544.933129] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [192544.936888] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=8) [192544.955766] wlp3s0: associated [192545.032432] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [193168.444766] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) [193168.677644] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [193168.681980] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [193168.682619] wlp3s0: authenticated [193168.683120] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [193168.937064] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [193168.941010] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [193168.941731] wlp3s0: authenticated [193168.942579] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [193168.945779] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [193168.965500] wlp3s0: associated [193169.050727] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [193202.224889] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [193202.244029] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [193202.247470] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [193202.249025] wlp3s0: authenticated [193202.249968] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [193202.253653] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=15) [193202.273273] wlp3s0: associated [193202.326232] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [194105.147207] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194105.151882] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194105.152682] wlp3s0: authenticated [194105.153783] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [194105.156061] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [194105.159220] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [194105.180102] wlp3s0: associated [194105.256905] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [194136.480657] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [194136.499274] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194136.502952] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194136.504879] wlp3s0: authenticated [194136.505497] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [194136.509321] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=20) [194136.528567] wlp3s0: associated [194136.607093] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [194861.688021] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194861.692478] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194861.693273] wlp3s0: authenticated [194861.694542] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [194861.775973] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [194861.779271] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [194861.798557] wlp3s0: associated [194861.892778] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [194923.824907] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [194923.844021] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194923.848711] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194923.850367] wlp3s0: authenticated [194923.850719] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [194924.103254] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194924.106658] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194924.108054] wlp3s0: authenticated [194924.108728] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [194924.111530] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [194924.132390] wlp3s0: associated [194924.135449] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [194955.359025] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [194955.378249] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [194955.382774] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [194955.384442] wlp3s0: authenticated [194955.386239] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [194955.389876] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=23) [194955.408830] wlp3s0: associated [194956.509276] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [196786.729428] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [196787.329042] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [196787.333122] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [196787.333812] wlp3s0: authenticated [196787.335696] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [196787.338882] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [196787.358883] wlp3s0: associated [196787.475478] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [196818.801518] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [196818.820525] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [196818.825928] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [196818.827628] wlp3s0: authenticated [196818.828138] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [196818.832137] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=26) [196818.852001] wlp3s0: associated [196818.926833] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [197451.838542] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [197451.842953] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [197451.843634] wlp3s0: authenticated [197451.844374] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [197452.134013] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [197452.135608] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [197452.136311] wlp3s0: authenticated [197452.137299] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [197452.197320] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [197452.200906] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [197452.221914] wlp3s0: associated [197452.298884] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [197483.629751] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [197483.648956] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [197483.653541] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [197483.655127] wlp3s0: authenticated [197483.655638] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [197483.659333] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=26) [197483.679125] wlp3s0: associated [197483.695598] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [197784.727400] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [197784.731782] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [197784.732455] wlp3s0: authenticated [197784.733992] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [197784.737256] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [197784.758142] wlp3s0: associated [197784.834002] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [197815.955571] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [197815.974577] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [197815.979279] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [197815.981246] wlp3s0: authenticated [197815.982423] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [197815.986100] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=26) [197816.005275] wlp3s0: associated [197816.080096] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199015.001876] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199015.005754] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199015.006659] wlp3s0: authenticated [199015.009757] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199015.012963] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [199015.032450] wlp3s0: associated [199015.046065] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199046.270953] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [199046.290001] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199046.294588] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199046.298202] wlp3s0: authenticated [199046.300158] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199046.303914] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=30) [199046.323599] wlp3s0: associated [199046.803628] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199060.579192] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199060.583845] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199060.584686] wlp3s0: authenticated [199060.585891] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199060.588931] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [199060.607753] wlp3s0: associated [199060.613246] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199093.377760] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [199093.396814] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199093.401424] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199093.402996] wlp3s0: authenticated [199093.403263] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199093.407031] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=30) [199093.426648] wlp3s0: associated [199094.213964] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199394.462518] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199394.466714] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199394.467470] wlp3s0: authenticated [199394.468807] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [199394.534648] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199394.537649] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [199394.556753] wlp3s0: associated [199394.636210] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [199425.557376] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [199425.576764] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [199425.581533] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [199425.583064] wlp3s0: authenticated [199425.584011] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [199425.587707] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=31) [199425.607361] wlp3s0: associated [199425.779221] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [200930.464228] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [200930.468394] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [200930.469106] wlp3s0: authenticated [200930.470822] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [200930.474006] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [200930.493189] wlp3s0: associated [200930.507009] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [200961.730731] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [200961.750021] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [200961.754947] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [200961.756513] wlp3s0: authenticated [200961.757233] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [200961.760885] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=33) [200961.780264] wlp3s0: associated [200961.854241] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [202713.603249] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [202713.805576] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [202713.809793] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [202713.810454] wlp3s0: authenticated [202713.813237] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [202713.874507] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [202713.877659] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [202713.896379] wlp3s0: associated [202713.976709] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [202746.535758] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [202746.554905] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [202746.559376] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [202746.561041] wlp3s0: authenticated [202746.562914] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [202746.566630] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=35) [202746.586281] wlp3s0: associated [202746.654039] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [204544.857096] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [204545.432679] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [204545.436347] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [204545.437011] wlp3s0: authenticated [204545.438865] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [204545.471323] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [204545.474588] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [204545.496013] wlp3s0: associated [204545.573618] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [204576.796657] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [204576.815329] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [204576.819105] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [204576.820640] wlp3s0: authenticated [204576.822707] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [204576.826483] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=39) [204576.846177] wlp3s0: associated [204576.918924] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [205781.037983] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [205781.042111] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [205781.042886] wlp3s0: authenticated [205781.045462] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [205781.111337] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [205781.114647] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [205781.133572] wlp3s0: associated [205781.315255] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [205796.344849] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [205796.395596] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [205796.672504] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [205796.772851] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [205796.776575] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [205796.777304] wlp3s0: authenticated [205796.778012] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [205796.781703] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=39) [205796.802873] wlp3s0: associated [205796.890729] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [205796.928963] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [205797.488503] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [205797.765730] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [205798.294202] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [205798.297042] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [205798.297744] wlp3s0: authenticated [205798.299978] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [205798.303107] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=40) [205798.322171] wlp3s0: associated [205798.324207] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [205798.632419] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [207671.255317] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 23=IEEE8021X_FAILED) [207681.898224] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [207681.902248] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [207681.902914] wlp3s0: authenticated [207681.905451] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [207681.929368] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [207681.932544] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [207681.953873] wlp3s0: associated [207682.030935] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [207713.152267] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [207713.171611] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [207713.176427] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [207713.178030] wlp3s0: authenticated [207713.178282] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [207713.272776] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [207713.276581] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=44) [207713.296630] wlp3s0: associated [207713.374792] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [208264.891052] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [208264.958045] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208265.226081] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208265.780965] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208266.049358] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208266.570557] PM: suspend entry (deep) [208267.229174] Filesystems sync: 0.658 seconds [208267.285719] Freezing user space processes ... (elapsed 0.002 seconds) done. [208267.288338] OOM killer disabled. [208267.288340] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [208267.289565] printk: Suspending console(s) (use no_console_suspend to debug) [208267.304626] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [208267.304662] sd 0:0:0:0: [sda] Synchronizing SCSI cache [208267.306486] sd 1:0:0:0: [sdb] Stopping disk [208267.350416] sd 0:0:0:0: [sda] Stopping disk [208268.693309] PM: suspend devices took 1.403 seconds [208268.707082] ACPI: EC: interrupt blocked [208268.720921] ACPI: Preparing to enter system sleep state S3 [208268.793830] ACPI: EC: event blocked [208268.793832] ACPI: EC: EC stopped [208268.793833] PM: Saving platform NVS memory [208268.793988] Disabling non-boot CPUs ... [208268.795947] smpboot: CPU 1 is now offline [208268.798551] IRQ 30: no longer affine to CPU2 [208268.799593] smpboot: CPU 2 is now offline [208268.803028] smpboot: CPU 3 is now offline [208268.806657] smpboot: CPU 4 is now offline [208268.809610] IRQ 23: no longer affine to CPU5 [208268.810646] smpboot: CPU 5 is now offline [208268.812810] IRQ 16: no longer affine to CPU6 [208268.813936] smpboot: CPU 6 is now offline [208268.816147] IRQ 28: no longer affine to CPU7 [208268.816151] IRQ 29: no longer affine to CPU7 [208268.816157] IRQ 33: no longer affine to CPU7 [208268.817191] smpboot: CPU 7 is now offline [208268.819966] ACPI: Low-level resume complete [208268.820022] ACPI: EC: EC started [208268.820023] PM: Restoring platform NVS memory [208268.821647] Enabling non-boot CPUs ... [208268.821731] x86: Booting SMP configuration: [208268.821732] smpboot: Booting Node 0 Processor 1 APIC 0x2 [208268.825741] CPU1 is up [208268.825843] smpboot: Booting Node 0 Processor 2 APIC 0x4 [208268.829504] CPU2 is up [208268.829545] smpboot: Booting Node 0 Processor 3 APIC 0x6 [208268.833216] CPU3 is up [208268.833256] smpboot: Booting Node 0 Processor 4 APIC 0x1 [208268.836202] CPU4 is up [208268.836239] smpboot: Booting Node 0 Processor 5 APIC 0x3 [208268.839014] CPU5 is up [208268.839047] smpboot: Booting Node 0 Processor 6 APIC 0x5 [208268.841830] CPU6 is up [208268.841865] smpboot: Booting Node 0 Processor 7 APIC 0x7 [208268.844654] CPU7 is up [208268.847108] ACPI: Waking up from system sleep state S3 [208269.774215] ACPI: EC: interrupt unblocked [208269.799107] ACPI: EC: event unblocked [208269.799163] usb usb3: root hub lost power or was reset [208269.799165] usb usb4: root hub lost power or was reset [208269.799308] usb usb1: root hub lost power or was reset [208269.799781] usb usb2: root hub lost power or was reset [208269.800690] sd 1:0:0:0: [sdb] Starting disk [208269.800691] sd 0:0:0:0: [sda] Starting disk [208269.803210] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [208269.803671] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [208269.813078] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208270.112149] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [208270.114215] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208270.114219] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208270.119578] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208270.119583] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208270.121399] ata3.00: configured for UDMA/133 [208270.140779] usb 2-1: reset high-speed USB device number 2 using ehci-pci [208270.140784] usb 1-1: reset high-speed USB device number 2 using ehci-pci [208270.308213] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208270.546738] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [208270.694771] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [208270.838722] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [208270.919133] PM: resume devices took 1.120 seconds [208270.919171] OOM killer enabled. [208270.919171] Restarting tasks ... done. [208271.101676] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [208271.104220] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [208271.139853] PM: suspend exit [208271.140424] Bluetooth: hci0: unexpected event for opcode 0x0000 [208271.286447] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208271.286455] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208271.336748] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [208271.345761] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208271.345767] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208271.360684] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [208271.363566] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [208271.382191] ata2.00: configured for UDMA/133 [208271.534482] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208271.534492] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208271.585121] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [208271.594114] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [208271.594124] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [208271.630525] ata1.00: configured for UDMA/133 [208272.812044] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208273.078191] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208273.817071] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208274.085190] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [208274.693671] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [208274.704128] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [208274.709032] wlp3s0: authenticated [208274.709267] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [208274.709605] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [208274.714936] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [208274.719951] wlp3s0: associated [208274.720444] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [208278.406646] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [208300.031901] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [208300.031917] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [209627.562252] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [209627.680516] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209627.948564] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209628.038801] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209628.306907] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209629.908032] nouveau 0000:01:00.0: Enabling HDA controller [209630.198636] PM: suspend entry (deep) [209630.338600] Filesystems sync: 0.139 seconds [209630.396912] Freezing user space processes ... (elapsed 0.002 seconds) done. [209630.399559] OOM killer disabled. [209630.399561] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [209630.400828] printk: Suspending console(s) (use no_console_suspend to debug) [209630.411025] sd 0:0:0:0: [sda] Synchronizing SCSI cache [209630.411054] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [209630.412938] sd 1:0:0:0: [sdb] Stopping disk [209630.481671] sd 0:0:0:0: [sda] Stopping disk [209631.820427] PM: suspend devices took 1.420 seconds [209631.834658] ACPI: EC: interrupt blocked [209631.847390] ACPI: Preparing to enter system sleep state S3 [209631.920277] ACPI: EC: event blocked [209631.920278] ACPI: EC: EC stopped [209631.920279] PM: Saving platform NVS memory [209631.920409] Disabling non-boot CPUs ... [209631.922308] smpboot: CPU 1 is now offline [209631.925098] IRQ 30: no longer affine to CPU2 [209631.926123] smpboot: CPU 2 is now offline [209631.929772] smpboot: CPU 3 is now offline [209631.934006] smpboot: CPU 4 is now offline [209631.936193] IRQ 23: no longer affine to CPU5 [209631.937221] smpboot: CPU 5 is now offline [209631.939247] IRQ 16: no longer affine to CPU6 [209631.940282] smpboot: CPU 6 is now offline [209631.942948] IRQ 28: no longer affine to CPU7 [209631.942953] IRQ 29: no longer affine to CPU7 [209631.942957] IRQ 33: no longer affine to CPU7 [209631.944008] smpboot: CPU 7 is now offline [209631.946727] ACPI: Low-level resume complete [209631.946817] ACPI: EC: EC started [209631.946818] PM: Restoring platform NVS memory [209631.949492] Enabling non-boot CPUs ... [209631.949593] x86: Booting SMP configuration: [209631.949596] smpboot: Booting Node 0 Processor 1 APIC 0x2 [209631.955382] CPU1 is up [209631.955504] smpboot: Booting Node 0 Processor 2 APIC 0x4 [209631.960695] CPU2 is up [209631.960856] smpboot: Booting Node 0 Processor 3 APIC 0x6 [209631.966060] CPU3 is up [209631.966128] smpboot: Booting Node 0 Processor 4 APIC 0x1 [209631.969834] CPU4 is up [209631.969894] smpboot: Booting Node 0 Processor 5 APIC 0x3 [209631.973293] CPU5 is up [209631.973353] smpboot: Booting Node 0 Processor 6 APIC 0x5 [209631.976788] CPU6 is up [209631.976846] smpboot: Booting Node 0 Processor 7 APIC 0x7 [209631.980306] CPU7 is up [209631.984330] ACPI: Waking up from system sleep state S3 [209632.845274] ACPI: EC: interrupt unblocked [209632.869250] ACPI: EC: event unblocked [209632.869327] usb usb1: root hub lost power or was reset [209632.869336] usb usb3: root hub lost power or was reset [209632.869340] usb usb4: root hub lost power or was reset [209632.869357] usb usb2: root hub lost power or was reset [209632.873257] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [209632.873286] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [209632.879589] sd 1:0:0:0: [sdb] Starting disk [209632.879756] sd 0:0:0:0: [sda] Starting disk [209632.883676] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209633.150377] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209633.191075] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [209633.193091] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209633.193097] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209633.198609] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209633.198613] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209633.200398] ata3.00: configured for UDMA/133 [209633.203538] usb 1-1: reset high-speed USB device number 2 using ehci-pci [209633.203551] usb 2-1: reset high-speed USB device number 2 using ehci-pci [209633.609525] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [209633.751557] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [209633.895507] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [209634.063821] PM: resume devices took 1.195 seconds [209634.063859] OOM killer enabled. [209634.063860] Restarting tasks ... done. [209634.067722] Bluetooth: hci0: unexpected event for opcode 0x0000 [209634.230452] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [209634.232760] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [209634.320773] PM: suspend exit [209634.401032] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209634.401036] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209634.451028] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [209634.460017] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209634.460020] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209634.496440] ata2.00: configured for UDMA/133 [209634.647441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [209634.649765] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [209634.808122] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209634.808127] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209634.858502] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [209634.867486] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [209634.867494] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [209634.903908] ata1.00: configured for UDMA/133 [209635.317935] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209635.583806] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209636.351799] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209636.617836] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [209637.298610] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [209637.299988] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [209637.303308] wlp3s0: authenticated [209637.303404] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [209637.304385] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [209637.307458] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=2) [209637.319857] wlp3s0: associated [209637.320184] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [209663.274972] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [209663.274987] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [218587.769577] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [218588.022417] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218588.290702] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218588.891273] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218589.161483] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218589.653156] PM: suspend entry (deep) [218590.418632] Filesystems sync: 0.765 seconds [218590.475930] Freezing user space processes ... (elapsed 0.003 seconds) done. [218590.478986] OOM killer disabled. [218590.478988] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [218590.479988] printk: Suspending console(s) (use no_console_suspend to debug) [218590.490181] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [218590.490185] sd 0:0:0:0: [sda] Synchronizing SCSI cache [218590.492008] sd 1:0:0:0: [sdb] Stopping disk [218590.539334] sd 0:0:0:0: [sda] Stopping disk [218591.882133] PM: suspend devices took 1.402 seconds [218591.896523] ACPI: EC: interrupt blocked [218591.910419] ACPI: Preparing to enter system sleep state S3 [218591.983241] ACPI: EC: event blocked [218591.983243] ACPI: EC: EC stopped [218591.983244] PM: Saving platform NVS memory [218591.983395] Disabling non-boot CPUs ... [218591.985870] smpboot: CPU 1 is now offline [218591.988302] IRQ 30: no longer affine to CPU2 [218591.989333] smpboot: CPU 2 is now offline [218591.993199] smpboot: CPU 3 is now offline [218591.997231] smpboot: CPU 4 is now offline [218592.000130] IRQ 23: no longer affine to CPU5 [218592.001158] smpboot: CPU 5 is now offline [218592.003946] IRQ 16: no longer affine to CPU6 [218592.005002] smpboot: CPU 6 is now offline [218592.007730] IRQ 28: no longer affine to CPU7 [218592.007734] IRQ 29: no longer affine to CPU7 [218592.007739] IRQ 33: no longer affine to CPU7 [218592.008773] smpboot: CPU 7 is now offline [218592.011449] ACPI: Low-level resume complete [218592.011503] ACPI: EC: EC started [218592.011504] PM: Restoring platform NVS memory [218592.013209] Enabling non-boot CPUs ... [218592.013267] x86: Booting SMP configuration: [218592.013268] smpboot: Booting Node 0 Processor 1 APIC 0x2 [218592.017266] CPU1 is up [218592.017322] smpboot: Booting Node 0 Processor 2 APIC 0x4 [218592.020972] CPU2 is up [218592.021011] smpboot: Booting Node 0 Processor 3 APIC 0x6 [218592.024686] CPU3 is up [218592.024727] smpboot: Booting Node 0 Processor 4 APIC 0x1 [218592.027675] CPU4 is up [218592.027711] smpboot: Booting Node 0 Processor 5 APIC 0x3 [218592.030488] CPU5 is up [218592.030522] smpboot: Booting Node 0 Processor 6 APIC 0x5 [218592.033311] CPU6 is up [218592.033343] smpboot: Booting Node 0 Processor 7 APIC 0x7 [218592.036139] CPU7 is up [218592.038605] ACPI: Waking up from system sleep state S3 [218592.127632] ACPI: EC: interrupt unblocked [218592.151515] ACPI: EC: event unblocked [218592.151559] usb usb1: root hub lost power or was reset [218592.151589] usb usb3: root hub lost power or was reset [218592.151591] usb usb4: root hub lost power or was reset [218592.151673] usb usb2: root hub lost power or was reset [218592.153424] sd 0:0:0:0: [sda] Starting disk [218592.153428] sd 1:0:0:0: [sdb] Starting disk [218592.155470] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [218592.155591] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [218592.166596] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218592.432801] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218592.464518] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [218592.466601] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218592.466605] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218592.472007] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218592.472010] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218592.473765] ata3.00: configured for UDMA/133 [218592.493173] usb 1-1: reset high-speed USB device number 2 using ehci-pci [218592.493179] usb 2-1: reset high-speed USB device number 2 using ehci-pci [218592.899152] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [218593.041202] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [218593.185130] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [218593.353487] PM: resume devices took 1.202 seconds [218593.353523] OOM killer enabled. [218593.353524] Restarting tasks ... done. [218593.356769] Bluetooth: hci0: unexpected event for opcode 0x0000 [218593.563363] PM: suspend exit [218594.235075] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [218594.237404] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [218594.449308] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218594.449313] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218594.499405] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [218594.508389] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218594.508392] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218594.544844] ata2.00: configured for UDMA/133 [218594.545076] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [218594.547392] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [218594.746313] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218594.746316] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218594.796344] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [218594.805329] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [218594.805333] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [218594.841761] ata1.00: configured for UDMA/133 [218595.027423] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218595.293891] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218596.008978] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218596.275498] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [218596.872176] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [218596.873413] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [218596.876202] wlp3s0: authenticated [218596.876787] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [218596.877020] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [218596.881710] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [218596.884141] wlp3s0: associated [218596.884361] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [218622.386467] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [218622.386482] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [231213.922358] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [231214.039474] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231214.306132] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231214.397134] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231214.673842] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231215.198902] PM: suspend entry (deep) [231215.951048] Filesystems sync: 0.752 seconds [231216.009652] Freezing user space processes ... (elapsed 0.002 seconds) done. [231216.012296] OOM killer disabled. [231216.012298] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [231216.013662] printk: Suspending console(s) (use no_console_suspend to debug) [231216.024641] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [231216.024728] sd 0:0:0:0: [sda] Synchronizing SCSI cache [231216.026493] sd 1:0:0:0: [sdb] Stopping disk [231216.073127] sd 0:0:0:0: [sda] Stopping disk [231217.408161] PM: suspend devices took 1.394 seconds [231217.422274] ACPI: EC: interrupt blocked [231217.435292] ACPI: Preparing to enter system sleep state S3 [231217.508025] ACPI: EC: event blocked [231217.508026] ACPI: EC: EC stopped [231217.508027] PM: Saving platform NVS memory [231217.508158] Disabling non-boot CPUs ... [231217.510107] smpboot: CPU 1 is now offline [231217.512787] IRQ 30: no longer affine to CPU2 [231217.514408] smpboot: CPU 2 is now offline [231217.517828] smpboot: CPU 3 is now offline [231217.521225] smpboot: CPU 4 is now offline [231217.523615] IRQ 23: no longer affine to CPU5 [231217.524654] smpboot: CPU 5 is now offline [231217.527051] IRQ 16: no longer affine to CPU6 [231217.528095] smpboot: CPU 6 is now offline [231217.530472] IRQ 28: no longer affine to CPU7 [231217.530478] IRQ 29: no longer affine to CPU7 [231217.530483] IRQ 33: no longer affine to CPU7 [231217.531522] smpboot: CPU 7 is now offline [231217.534410] ACPI: Low-level resume complete [231217.534464] ACPI: EC: EC started [231217.534465] PM: Restoring platform NVS memory [231217.535982] Enabling non-boot CPUs ... [231217.536040] x86: Booting SMP configuration: [231217.536042] smpboot: Booting Node 0 Processor 1 APIC 0x2 [231217.540059] CPU1 is up [231217.540114] smpboot: Booting Node 0 Processor 2 APIC 0x4 [231217.543776] CPU2 is up [231217.543817] smpboot: Booting Node 0 Processor 3 APIC 0x6 [231217.547482] CPU3 is up [231217.547521] smpboot: Booting Node 0 Processor 4 APIC 0x1 [231217.550464] CPU4 is up [231217.550500] smpboot: Booting Node 0 Processor 5 APIC 0x3 [231217.553269] CPU5 is up [231217.553302] smpboot: Booting Node 0 Processor 6 APIC 0x5 [231217.556093] CPU6 is up [231217.556126] smpboot: Booting Node 0 Processor 7 APIC 0x7 [231217.558923] CPU7 is up [231217.561383] ACPI: Waking up from system sleep state S3 [231217.683435] ACPI: EC: interrupt unblocked [231217.707298] ACPI: EC: event unblocked [231217.707336] usb usb1: root hub lost power or was reset [231217.707345] usb usb3: root hub lost power or was reset [231217.707347] usb usb4: root hub lost power or was reset [231217.707462] usb usb2: root hub lost power or was reset [231217.711227] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [231217.711376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [231217.714185] mei_me 0000:00:16.0: FW not ready: resetting. [231217.714201] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [231217.717516] sd 0:0:0:0: [sda] Starting disk [231217.717558] sd 1:0:0:0: [sdb] Starting disk [231217.724279] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231217.990877] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231218.032346] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [231218.033785] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231218.033791] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231218.036273] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231218.036278] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231218.037186] ata3.00: configured for UDMA/133 [231218.044939] usb 1-1: reset high-speed USB device number 2 using ehci-pci [231218.044945] usb 2-1: reset high-speed USB device number 2 using ehci-pci [231218.450930] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [231218.598929] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [231218.740980] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [231218.823581] PM: resume devices took 1.116 seconds [231218.823638] OOM killer enabled. [231218.823639] Restarting tasks ... done. [231219.056639] PM: suspend exit [231219.057525] Bluetooth: hci0: unexpected event for opcode 0x0000 [231219.800860] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [231219.803161] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [231219.978334] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231219.978338] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231220.028334] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [231220.037323] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231220.037326] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231220.061855] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [231220.064291] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [231220.073708] ata2.00: configured for UDMA/133 [231220.241858] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231220.241862] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231220.291961] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [231220.300920] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [231220.300923] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [231220.337280] ata1.00: configured for UDMA/133 [231220.675258] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231220.941216] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231221.552147] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231221.818306] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231222.339312] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231222.342022] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231222.342761] wlp3s0: authenticated [231222.342832] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [231222.344794] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231222.347910] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [231222.366873] wlp3s0: associated [231222.446377] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231222.787447] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [231253.109933] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231253.113723] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231253.114610] wlp3s0: authenticated [231253.114825] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [231253.117595] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231253.120949] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [231253.141894] wlp3s0: associated [231253.219138] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231284.341124] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [231284.359298] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231284.362812] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231284.364477] wlp3s0: authenticated [231284.365000] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231284.368633] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [231284.387326] wlp3s0: associated [231284.397469] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231485.568631] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231485.572589] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231485.573213] wlp3s0: authenticated [231485.573723] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [231485.663836] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231485.667010] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [231485.688538] wlp3s0: associated [231485.766091] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231501.010869] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [231501.061045] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231501.329208] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231501.986318] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231502.254178] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [231502.788635] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231502.791543] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231502.792350] wlp3s0: authenticated [231502.796526] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231502.799590] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [231502.818710] wlp3s0: associated [231502.881923] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231503.144187] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [231534.004017] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [231534.023957] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231534.028275] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231534.043996] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [231534.060903] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [231534.078640] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [231534.264123] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231534.267365] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231534.268157] wlp3s0: authenticated [231534.269093] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [231534.303103] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231534.309188] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [231534.330143] wlp3s0: associated [231534.405407] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [231565.526487] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [231565.545478] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [231565.549745] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [231565.566315] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [231565.584604] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [231565.589072] wlp3s0: authenticated [231565.590661] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [231565.594567] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=4) [231565.614598] wlp3s0: associated [231565.788437] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [233428.844141] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [233429.420710] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [233429.424802] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [233429.425506] wlp3s0: authenticated [233429.428060] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [233429.431190] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [233429.450116] wlp3s0: associated [233429.489896] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [233462.965926] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [233462.985283] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [233462.989636] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [233462.991571] wlp3s0: authenticated [233462.992446] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [233462.996156] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [233463.015269] wlp3s0: associated [233463.022280] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [234128.466298] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [234128.470534] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [234128.471218] wlp3s0: authenticated [234128.472775] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [234128.563143] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [234128.566329] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [234128.585574] wlp3s0: associated [234128.665053] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [234160.298687] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [234160.317848] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [234160.322504] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [234160.324198] wlp3s0: authenticated [234160.326508] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [234160.330227] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [234160.348973] wlp3s0: associated [234160.353839] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [234385.492472] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [234385.498605] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [234385.499420] wlp3s0: authenticated [234385.500666] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [234385.582305] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [234385.585665] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [234385.606237] wlp3s0: associated [234385.684551] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [234417.010856] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [234417.030180] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [234417.034951] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [234417.036586] wlp3s0: authenticated [234417.037704] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [234417.041486] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=6) [234417.060703] wlp3s0: associated [234417.066058] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [235319.988430] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [235319.992036] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [235319.992799] wlp3s0: authenticated [235319.993813] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [235319.997062] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [235320.017542] wlp3s0: associated [235320.068220] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [235351.292003] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [235351.311245] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [235351.315424] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [235351.317001] wlp3s0: authenticated [235351.319235] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [235351.322867] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=8) [235351.341907] wlp3s0: associated [235351.347017] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [236254.416234] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [236254.420169] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [236254.421000] wlp3s0: authenticated [236254.422212] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [236254.452399] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [236254.455657] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [236254.475168] wlp3s0: associated [236254.554385] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [236285.777792] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [236285.796676] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [236285.800513] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [236285.802302] wlp3s0: authenticated [236285.802790] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [236285.806539] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=8) [236285.825623] wlp3s0: associated [236285.832688] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [238068.797668] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [238068.862758] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238069.131044] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238069.633783] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238069.902509] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238070.415508] PM: suspend entry (deep) [238071.054063] Filesystems sync: 0.638 seconds [238071.112233] Freezing user space processes ... (elapsed 0.003 seconds) done. [238071.115419] OOM killer disabled. [238071.115421] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [238071.116417] printk: Suspending console(s) (use no_console_suspend to debug) [238071.126306] sd 0:0:0:0: [sda] Synchronizing SCSI cache [238071.126360] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [238071.128231] sd 1:0:0:0: [sdb] Stopping disk [238071.174661] sd 0:0:0:0: [sda] Stopping disk [238072.529756] PM: suspend devices took 1.413 seconds [238072.543944] ACPI: EC: interrupt blocked [238072.556953] ACPI: Preparing to enter system sleep state S3 [238072.629641] ACPI: EC: event blocked [238072.629642] ACPI: EC: EC stopped [238072.629643] PM: Saving platform NVS memory [238072.629797] Disabling non-boot CPUs ... [238072.631767] smpboot: CPU 1 is now offline [238072.634704] IRQ 30: no longer affine to CPU2 [238072.635737] smpboot: CPU 2 is now offline [238072.639592] smpboot: CPU 3 is now offline [238072.643561] smpboot: CPU 4 is now offline [238072.646480] IRQ 23: no longer affine to CPU5 [238072.647964] smpboot: CPU 5 is now offline [238072.650306] IRQ 16: no longer affine to CPU6 [238072.651340] smpboot: CPU 6 is now offline [238072.653916] IRQ 28: no longer affine to CPU7 [238072.653920] IRQ 29: no longer affine to CPU7 [238072.653925] IRQ 33: no longer affine to CPU7 [238072.654958] smpboot: CPU 7 is now offline [238072.657856] ACPI: Low-level resume complete [238072.657946] ACPI: EC: EC started [238072.657947] PM: Restoring platform NVS memory [238072.660657] Enabling non-boot CPUs ... [238072.660757] x86: Booting SMP configuration: [238072.660759] smpboot: Booting Node 0 Processor 1 APIC 0x2 [238072.666557] CPU1 is up [238072.666664] smpboot: Booting Node 0 Processor 2 APIC 0x4 [238072.671856] CPU2 is up [238072.672039] smpboot: Booting Node 0 Processor 3 APIC 0x6 [238072.677293] CPU3 is up [238072.677366] smpboot: Booting Node 0 Processor 4 APIC 0x1 [238072.681145] CPU4 is up [238072.681210] smpboot: Booting Node 0 Processor 5 APIC 0x3 [238072.684608] CPU5 is up [238072.684670] smpboot: Booting Node 0 Processor 6 APIC 0x5 [238072.688104] CPU6 is up [238072.688162] smpboot: Booting Node 0 Processor 7 APIC 0x7 [238072.691627] CPU7 is up [238072.695649] ACPI: Waking up from system sleep state S3 [238072.709657] ACPI: EC: interrupt unblocked [238072.733689] ACPI: EC: event unblocked [238072.733764] usb usb1: root hub lost power or was reset [238072.733783] usb usb2: root hub lost power or was reset [238072.733788] usb usb3: root hub lost power or was reset [238072.733791] usb usb4: root hub lost power or was reset [238072.737702] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [238072.737733] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [238072.737749] sd 0:0:0:0: [sda] Starting disk [238072.737751] sd 1:0:0:0: [sdb] Starting disk [238072.750277] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238073.016853] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238073.043154] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [238073.045187] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238073.045194] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238073.050606] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238073.050612] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238073.052390] ata3.00: configured for UDMA/133 [238073.071894] usb 2-1: reset high-speed USB device number 2 using ehci-pci [238073.071907] usb 1-1: reset high-speed USB device number 2 using ehci-pci [238073.477938] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [238073.621889] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [238073.763879] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [238073.932266] PM: resume devices took 1.199 seconds [238073.932331] OOM killer enabled. [238073.932332] Restarting tasks ... done. [238074.143059] PM: suspend exit [238074.144047] Bluetooth: hci0: unexpected event for opcode 0x0000 [238074.924793] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [238074.927118] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [238075.109786] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238075.109804] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238075.159960] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [238075.168968] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238075.168971] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238075.205363] ata2.00: configured for UDMA/133 [238075.230783] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [238075.233081] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [238075.367684] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238075.367687] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238075.417803] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [238075.426797] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [238075.426799] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [238075.463163] ata1.00: configured for UDMA/133 [238075.763191] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238076.029095] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238076.637170] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238076.904019] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [238077.423392] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [238077.425452] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238077.426053] wlp3s0: authenticated [238077.426730] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238077.429736] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=14) [238077.448322] wlp3s0: associated [238077.524666] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [238079.880832] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [238103.526126] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [238103.526141] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [238682.216417] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [238682.220162] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238682.236177] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [238682.249384] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [238682.254317] wlp3s0: authenticated [238682.255093] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238682.258309] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [238682.279061] wlp3s0: associated [238682.449692] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [238713.570683] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [238713.590030] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [238713.594623] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238713.596216] wlp3s0: authenticated [238713.597501] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238713.601215] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=17) [238713.619958] wlp3s0: associated [238713.623098] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [238872.125733] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [238872.131178] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238872.132020] wlp3s0: authenticated [238872.132740] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [238872.193821] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238872.197163] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [238872.216718] wlp3s0: associated [238872.296165] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [238903.417300] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [238903.436361] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [238903.441225] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238903.442879] wlp3s0: authenticated [238903.443196] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238903.446869] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=17) [238903.466226] wlp3s0: associated [238903.469391] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [239641.412633] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [239641.416657] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [239641.417382] wlp3s0: authenticated [239641.420700] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [239641.511551] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [239641.514705] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [239641.535678] wlp3s0: associated [239641.613948] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [239673.042595] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [239673.062072] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [239673.066989] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [239673.082812] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [239673.094028] wlp3s0: authenticated [239673.094965] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [239673.098714] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=22) [239673.118476] wlp3s0: associated [239673.196601] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [240214.035122] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [240214.039856] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240214.040570] wlp3s0: authenticated [240214.040779] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [240214.123000] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [240214.126295] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [240214.145732] wlp3s0: associated [240214.224766] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [240245.449045] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [240245.468519] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [240245.473519] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240245.475127] wlp3s0: authenticated [240245.477356] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [240245.481066] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=27) [240245.500141] wlp3s0: associated [240245.602471] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [240577.019181] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [240577.023315] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240577.024144] wlp3s0: authenticated [240577.024841] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [240577.130264] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [240577.133409] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [240577.152687] wlp3s0: associated [240577.226449] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [240608.450069] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [240608.469261] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [240608.474016] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240608.475715] wlp3s0: authenticated [240608.476063] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [240608.501681] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [240608.505488] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=29) [240608.525547] wlp3s0: associated [240608.604038] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [241143.303974] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [241905.156175] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [241905.159774] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [241905.160511] wlp3s0: authenticated [241905.161374] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [241905.230038] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [241905.233393] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [241905.237949] wlp3s0: associated [241905.331702] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [241936.453136] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [241936.456051] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [241936.459583] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [241936.461135] wlp3s0: authenticated [241936.462454] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [241936.466146] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=37) [241936.469229] wlp3s0: associated [241936.503915] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [241998.302838] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [241998.306439] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [241998.320678] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [241998.334664] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [241998.348013] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [241998.532296] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [241998.533775] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [241998.534609] wlp3s0: authenticated [241998.535817] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [241998.617308] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [241998.622338] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [241998.626141] wlp3s0: associated [241998.718925] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [242029.942530] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [242029.944561] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [242029.947714] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [242029.949294] wlp3s0: authenticated [242029.950648] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [242029.954335] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=37) [242029.957073] wlp3s0: associated [242029.993491] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [243862.982652] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 23=IEEE8021X_FAILED) [243873.629977] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [243873.633512] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [243873.634282] wlp3s0: authenticated [243873.634670] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [243873.740912] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [243873.744438] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [243873.749363] wlp3s0: associated [243873.836411] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [243905.061647] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [243905.064190] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [243905.068139] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [243905.069867] wlp3s0: authenticated [243905.071262] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [243905.074947] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=42) [243905.078319] wlp3s0: associated [243905.110529] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [244485.458988] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [244485.462124] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [244485.462767] wlp3s0: authenticated [244485.465432] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [244485.569720] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [244485.573025] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [244485.575429] wlp3s0: associated [244485.666166] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [244516.996943] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [244517.000217] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [244517.004015] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [244517.005731] wlp3s0: authenticated [244517.007431] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [244517.011165] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=45) [244517.014083] wlp3s0: associated [244517.042523] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [246186.852339] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) [246187.078715] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [246187.081657] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [246187.082277] wlp3s0: authenticated [246187.082851] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [246187.086011] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [246187.088406] wlp3s0: associated [246187.115940] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [246218.339966] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [246218.342408] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [246218.345952] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [246218.363184] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [246218.378108] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [246218.389671] wlp3s0: authenticated [246218.390270] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [246218.394061] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=50) [246218.397206] wlp3s0: associated [246218.491682] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [246563.742553] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [246563.783896] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246564.052169] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246564.578924] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246564.855937] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246566.512061] nouveau 0000:01:00.0: Enabling HDA controller [246566.786927] PM: suspend entry (deep) [246566.989460] Filesystems sync: 0.202 seconds [246567.046639] Freezing user space processes ... (elapsed 0.001 seconds) done. [246567.048050] OOM killer disabled. [246567.048051] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [246567.049055] printk: Suspending console(s) (use no_console_suspend to debug) [246567.059105] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [246567.059137] sd 0:0:0:0: [sda] Synchronizing SCSI cache [246567.060981] sd 1:0:0:0: [sdb] Stopping disk [246567.077371] sd 0:0:0:0: [sda] Stopping disk [246568.419600] PM: suspend devices took 1.370 seconds [246568.433621] ACPI: EC: interrupt blocked [246568.447569] ACPI: Preparing to enter system sleep state S3 [246568.517203] ACPI: EC: event blocked [246568.517204] ACPI: EC: EC stopped [246568.517204] PM: Saving platform NVS memory [246568.517287] Disabling non-boot CPUs ... [246568.519219] smpboot: CPU 1 is now offline [246568.520765] IRQ 30: no longer affine to CPU2 [246568.521784] smpboot: CPU 2 is now offline [246568.523999] smpboot: CPU 3 is now offline [246568.527984] smpboot: CPU 4 is now offline [246568.530277] IRQ 23: no longer affine to CPU5 [246568.531381] smpboot: CPU 5 is now offline [246568.533453] IRQ 16: no longer affine to CPU6 [246568.534505] smpboot: CPU 6 is now offline [246568.536753] IRQ 28: no longer affine to CPU7 [246568.536758] IRQ 29: no longer affine to CPU7 [246568.536764] IRQ 33: no longer affine to CPU7 [246568.537801] smpboot: CPU 7 is now offline [246568.540556] ACPI: Low-level resume complete [246568.540611] ACPI: EC: EC started [246568.540612] PM: Restoring platform NVS memory [246568.542255] Enabling non-boot CPUs ... [246568.542312] x86: Booting SMP configuration: [246568.542313] smpboot: Booting Node 0 Processor 1 APIC 0x2 [246568.546330] CPU1 is up [246568.546387] smpboot: Booting Node 0 Processor 2 APIC 0x4 [246568.550046] CPU2 is up [246568.550086] smpboot: Booting Node 0 Processor 3 APIC 0x6 [246568.553759] CPU3 is up [246568.553800] smpboot: Booting Node 0 Processor 4 APIC 0x1 [246568.556726] CPU4 is up [246568.556761] smpboot: Booting Node 0 Processor 5 APIC 0x3 [246568.559535] CPU5 is up [246568.559569] smpboot: Booting Node 0 Processor 6 APIC 0x5 [246568.562350] CPU6 is up [246568.562384] smpboot: Booting Node 0 Processor 7 APIC 0x7 [246568.565180] CPU7 is up [246568.567645] ACPI: Waking up from system sleep state S3 [246569.503723] ACPI: EC: interrupt unblocked [246569.528616] ACPI: EC: event unblocked [246569.528672] usb usb3: root hub lost power or was reset [246569.528675] usb usb4: root hub lost power or was reset [246569.528781] usb usb1: root hub lost power or was reset [246569.528938] usb usb2: root hub lost power or was reset [246569.532697] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [246569.532848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [246569.538868] sd 1:0:0:0: [sdb] Starting disk [246569.538895] sd 0:0:0:0: [sda] Starting disk [246569.543520] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246569.811985] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [246569.851702] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [246569.853784] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246569.853788] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246569.859130] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246569.859135] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246569.860978] ata3.00: configured for UDMA/133 [246569.864250] usb 2-1: reset high-speed USB device number 2 using ehci-pci [246569.864258] usb 1-1: reset high-speed USB device number 2 using ehci-pci [246570.270257] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [246570.412274] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [246570.555263] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [246570.723001] PM: resume devices took 1.194 seconds [246570.723039] OOM killer enabled. [246570.723040] Restarting tasks ... done. [246570.787168] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [246570.789501] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [246570.961361] PM: suspend exit [246570.962012] Bluetooth: hci0: unexpected event for opcode 0x0000 [246570.990652] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246570.990657] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246571.040816] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [246571.049178] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [246571.049811] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246571.049814] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246571.051507] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [246571.086232] ata2.00: configured for UDMA/133 [246571.251692] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246571.251696] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246571.301809] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [246571.310794] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [246571.310797] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [246571.347206] ata1.00: configured for UDMA/133 [246572.147579] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [246572.148784] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [246572.150354] wlp3s0: authenticated [246572.151143] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [246572.154022] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=50) [246572.173066] wlp3s0: associated [246572.190394] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [246572.815397] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [246600.205893] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [246600.205908] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [248474.305920] wlp3s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 23=IEEE8021X_FAILED) [248484.988314] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [248484.992861] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [248485.005632] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [248485.020207] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [248485.021074] wlp3s0: authenticated [248485.021353] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [248485.311542] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [248485.313345] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [248485.314265] wlp3s0: authenticated [248485.316259] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [248485.319400] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [248485.339136] wlp3s0: associated [248485.375196] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [248516.906119] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [248516.925383] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [248516.930163] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [248516.931805] wlp3s0: authenticated [248516.932649] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [248516.936390] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=57) [248516.964278] wlp3s0: associated [248516.964356] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [248744.329941] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [248744.334161] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [248744.335313] wlp3s0: authenticated [248744.336889] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [248744.425432] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [248744.428666] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [248744.447822] wlp3s0: associated [248744.527046] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [248775.648455] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [248775.667353] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [248775.671546] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [248775.673180] wlp3s0: authenticated [248775.673406] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [248775.697809] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [248775.701610] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=61) [248775.721193] wlp3s0: associated [248775.799359] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [249261.957036] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [249261.961344] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [249261.962403] wlp3s0: authenticated [249261.963975] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [249262.047676] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [249262.050752] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [249262.071137] wlp3s0: associated [249262.150065] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [249293.373473] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [249293.392419] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [249293.396729] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [249293.398341] wlp3s0: authenticated [249293.399059] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [249293.402784] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=63) [249293.422403] wlp3s0: associated [249293.524623] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [251053.336686] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [251053.502109] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [251053.505771] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [251053.506573] wlp3s0: authenticated [251053.506693] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [251053.611170] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [251053.624954] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [251053.641603] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 3/3) [251053.658066] wlp3s0: association with XX:XX:XX:XX:XX:XX timed out [251053.805346] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [251053.807284] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [251053.808011] wlp3s0: authenticated [251053.808201] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [251054.469126] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [251054.472818] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [251054.485704] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [251054.500594] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [251054.516330] wlp3s0: authentication with XX:XX:XX:XX:XX:XX timed out [251055.563933] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [251055.566847] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [251055.567589] wlp3s0: authenticated [251055.569050] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [251055.572320] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [251055.591637] wlp3s0: associated [251055.654634] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [251088.209745] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [251088.229339] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [251088.234201] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [251088.235819] wlp3s0: authenticated [251088.237441] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [251088.241133] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=68) [251088.260141] wlp3s0: associated [251088.359812] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [252836.104184] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [252836.305796] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [252836.309386] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [252836.309991] wlp3s0: authenticated [252836.310995] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [252836.359654] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [252836.362899] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [252836.382258] wlp3s0: associated [252836.461828] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [252869.221118] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [252869.240000] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [252869.243864] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [252869.245420] wlp3s0: authenticated [252869.245589] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [252869.270131] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [252869.273917] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=72) [252869.293751] wlp3s0: associated [252869.473644] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [253318.947459] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [253318.951451] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [253318.952500] wlp3s0: authenticated [253318.952670] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [253318.962587] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [253318.965941] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [253318.985265] wlp3s0: associated [253319.064601] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [253350.391147] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [253350.410461] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [253350.414283] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [253350.415866] wlp3s0: authenticated [253350.417064] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [253350.420720] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=72) [253350.439660] wlp3s0: associated [253350.540154] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [254930.357393] wlp3s0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [254930.454347] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [254930.458463] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [254930.461674] wlp3s0: authenticated [254930.462313] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [254930.465785] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=77) [254930.486611] wlp3s0: associated [254930.544039] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [255018.498342] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [255018.552179] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255018.821007] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255019.358022] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255019.635520] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255020.113464] PM: suspend entry (deep) [255020.741309] Filesystems sync: 0.627 seconds [255020.798909] Freezing user space processes ... (elapsed 0.002 seconds) done. [255020.801784] OOM killer disabled. [255020.801786] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [255020.802751] printk: Suspending console(s) (use no_console_suspend to debug) [255020.813778] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [255020.813833] sd 0:0:0:0: [sda] Synchronizing SCSI cache [255020.815665] sd 1:0:0:0: [sdb] Stopping disk [255020.891149] sd 0:0:0:0: [sda] Stopping disk [255022.237991] PM: suspend devices took 1.435 seconds [255022.251282] ACPI: EC: interrupt blocked [255022.264312] ACPI: Preparing to enter system sleep state S3 [255022.337054] ACPI: EC: event blocked [255022.337056] ACPI: EC: EC stopped [255022.337057] PM: Saving platform NVS memory [255022.337208] Disabling non-boot CPUs ... [255022.339142] smpboot: CPU 1 is now offline [255022.341682] IRQ 30: no longer affine to CPU2 [255022.342723] smpboot: CPU 2 is now offline [255022.346217] smpboot: CPU 3 is now offline [255022.349740] smpboot: CPU 4 is now offline [255022.352705] IRQ 23: no longer affine to CPU5 [255022.353739] smpboot: CPU 5 is now offline [255022.356042] IRQ 16: no longer affine to CPU6 [255022.357085] smpboot: CPU 6 is now offline [255022.359390] IRQ 28: no longer affine to CPU7 [255022.359396] IRQ 29: no longer affine to CPU7 [255022.359401] IRQ 33: no longer affine to CPU7 [255022.360439] smpboot: CPU 7 is now offline [255022.363406] ACPI: Low-level resume complete [255022.363497] ACPI: EC: EC started [255022.363498] PM: Restoring platform NVS memory [255022.366247] Enabling non-boot CPUs ... [255022.366347] x86: Booting SMP configuration: [255022.366350] smpboot: Booting Node 0 Processor 1 APIC 0x2 [255022.372138] CPU1 is up [255022.372333] smpboot: Booting Node 0 Processor 2 APIC 0x4 [255022.377527] CPU2 is up [255022.377635] smpboot: Booting Node 0 Processor 3 APIC 0x6 [255022.382863] CPU3 is up [255022.382937] smpboot: Booting Node 0 Processor 4 APIC 0x1 [255022.386678] CPU4 is up [255022.386743] smpboot: Booting Node 0 Processor 5 APIC 0x3 [255022.390154] CPU5 is up [255022.390228] smpboot: Booting Node 0 Processor 6 APIC 0x5 [255022.393676] CPU6 is up [255022.393734] smpboot: Booting Node 0 Processor 7 APIC 0x7 [255022.397195] CPU7 is up [255022.401279] ACPI: Waking up from system sleep state S3 [255022.415044] ACPI: EC: interrupt unblocked [255022.439121] ACPI: EC: event unblocked [255022.439238] usb usb1: root hub lost power or was reset [255022.439244] usb usb2: root hub lost power or was reset [255022.439256] usb usb3: root hub lost power or was reset [255022.439260] usb usb4: root hub lost power or was reset [255022.443135] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [255022.443197] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [255022.443469] sd 0:0:0:0: [sda] Starting disk [255022.443473] sd 1:0:0:0: [sdb] Starting disk [255022.456693] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255022.724669] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255022.751525] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [255022.753606] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255022.753612] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255022.758922] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255022.758928] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255022.760779] ata3.00: configured for UDMA/133 [255022.780298] usb 2-1: reset high-speed USB device number 2 using ehci-pci [255022.780310] usb 1-1: reset high-speed USB device number 2 using ehci-pci [255023.186270] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [255023.328279] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [255023.472255] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [255023.640586] PM: resume devices took 1.202 seconds [255023.640651] OOM killer enabled. [255023.640653] Restarting tasks ... done. [255023.845551] PM: suspend exit [255023.846343] Bluetooth: hci0: unexpected event for opcode 0x0000 [255024.623253] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [255024.625945] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [255024.832864] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255024.832868] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255024.882952] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [255024.886178] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [255024.888503] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [255024.891969] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255024.891971] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255024.928416] ata2.00: configured for UDMA/133 [255025.056876] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255025.056880] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255025.106992] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [255025.116001] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [255025.116004] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [255025.152469] ata1.00: configured for UDMA/133 [255025.420632] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255025.687574] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255026.351292] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255026.617435] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [255027.271874] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [255027.274959] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [255027.284128] wlp3s0: authenticated [255027.284245] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [255027.285128] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [255027.289417] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [255027.294430] wlp3s0: associated [255027.294725] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [255053.422148] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [255053.422164] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [265234.088232] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [265234.141199] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265234.409170] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265235.091190] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265235.359801] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265235.865129] PM: suspend entry (deep) [265236.675631] Filesystems sync: 0.810 seconds [265236.733843] Freezing user space processes ... (elapsed 0.002 seconds) done. [265236.736539] OOM killer disabled. [265236.736541] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [265236.737746] printk: Suspending console(s) (use no_console_suspend to debug) [265236.744733] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [265236.744905] sd 0:0:0:0: [sda] Synchronizing SCSI cache [265236.746645] sd 1:0:0:0: [sdb] Stopping disk [265236.830275] sd 0:0:0:0: [sda] Stopping disk [265238.179853] PM: suspend devices took 1.442 seconds [265238.193319] ACPI: EC: interrupt blocked [265238.206307] ACPI: Preparing to enter system sleep state S3 [265238.279032] ACPI: EC: event blocked [265238.279034] ACPI: EC: EC stopped [265238.279036] PM: Saving platform NVS memory [265238.279177] Disabling non-boot CPUs ... [265238.281137] smpboot: CPU 1 is now offline [265238.283711] IRQ 30: no longer affine to CPU2 [265238.284754] smpboot: CPU 2 is now offline [265238.288158] smpboot: CPU 3 is now offline [265238.291785] smpboot: CPU 4 is now offline [265238.294765] IRQ 23: no longer affine to CPU5 [265238.295800] smpboot: CPU 5 is now offline [265238.297970] IRQ 16: no longer affine to CPU6 [265238.299024] smpboot: CPU 6 is now offline [265238.301371] IRQ 28: no longer affine to CPU7 [265238.301376] IRQ 29: no longer affine to CPU7 [265238.301381] IRQ 33: no longer affine to CPU7 [265238.302468] smpboot: CPU 7 is now offline [265238.305251] ACPI: Low-level resume complete [265238.305305] ACPI: EC: EC started [265238.305306] PM: Restoring platform NVS memory [265238.306859] Enabling non-boot CPUs ... [265238.306957] x86: Booting SMP configuration: [265238.306958] smpboot: Booting Node 0 Processor 1 APIC 0x2 [265238.310972] CPU1 is up [265238.311075] smpboot: Booting Node 0 Processor 2 APIC 0x4 [265238.314728] CPU2 is up [265238.314770] smpboot: Booting Node 0 Processor 3 APIC 0x6 [265238.318435] CPU3 is up [265238.318475] smpboot: Booting Node 0 Processor 4 APIC 0x1 [265238.321378] CPU4 is up [265238.321414] smpboot: Booting Node 0 Processor 5 APIC 0x3 [265238.324198] CPU5 is up [265238.324231] smpboot: Booting Node 0 Processor 6 APIC 0x5 [265238.327010] CPU6 is up [265238.327043] smpboot: Booting Node 0 Processor 7 APIC 0x7 [265238.329840] CPU7 is up [265238.332269] ACPI: Waking up from system sleep state S3 [265238.419436] ACPI: EC: interrupt unblocked [265238.444304] ACPI: EC: event unblocked [265238.444358] usb usb3: root hub lost power or was reset [265238.444361] usb usb4: root hub lost power or was reset [265238.444431] usb usb1: root hub lost power or was reset [265238.444489] usb usb2: root hub lost power or was reset [265238.448342] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [265238.448399] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [265238.454505] sd 0:0:0:0: [sda] Starting disk [265238.454516] sd 1:0:0:0: [sdb] Starting disk [265238.462020] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265238.730371] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265238.767529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [265238.769570] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265238.769574] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265238.774949] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265238.774964] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265238.776685] ata3.00: configured for UDMA/133 [265238.779971] usb 2-1: reset high-speed USB device number 2 using ehci-pci [265238.780983] usb 1-1: reset high-speed USB device number 2 using ehci-pci [265239.185995] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [265239.329943] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [265239.471939] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [265239.640351] PM: resume devices took 1.196 seconds [265239.640393] OOM killer enabled. [265239.640394] Restarting tasks ... done. [265239.898369] PM: suspend exit [265239.899636] Bluetooth: hci0: unexpected event for opcode 0x0000 [265240.536866] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [265240.539194] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [265240.732682] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265240.732686] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265240.782706] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [265240.791693] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265240.791696] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265240.795854] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [265240.798146] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [265240.828237] ata2.00: configured for UDMA/133 [265241.005529] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265241.005533] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265241.055561] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [265241.064544] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [265241.064547] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [265241.100942] ata1.00: configured for UDMA/133 [265241.436232] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265241.702348] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265242.321709] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265242.588724] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [265243.204487] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [265243.206478] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [265243.209879] wlp3s0: authenticated [265243.209959] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [265243.210803] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [265243.215024] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=7) [265243.219221] wlp3s0: associated [265243.219488] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [265268.434209] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [265268.434223] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [271977.639909] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [271977.763159] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271978.031145] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271978.674143] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271978.951640] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271979.419047] PM: suspend entry (deep) [271980.128198] Filesystems sync: 0.709 seconds [271980.184988] Freezing user space processes ... (elapsed 0.002 seconds) done. [271980.187755] OOM killer disabled. [271980.187756] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [271980.188738] printk: Suspending console(s) (use no_console_suspend to debug) [271980.199707] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [271980.199841] sd 0:0:0:0: [sda] Synchronizing SCSI cache [271980.201517] sd 1:0:0:0: [sdb] Stopping disk [271980.260304] sd 0:0:0:0: [sda] Stopping disk [271981.604339] PM: suspend devices took 1.415 seconds [271981.618181] ACPI: EC: interrupt blocked [271981.631331] ACPI: Preparing to enter system sleep state S3 [271981.704038] ACPI: EC: event blocked [271981.704040] ACPI: EC: EC stopped [271981.704041] PM: Saving platform NVS memory [271981.704171] Disabling non-boot CPUs ... [271981.706643] smpboot: CPU 1 is now offline [271981.709127] IRQ 30: no longer affine to CPU2 [271981.710156] smpboot: CPU 2 is now offline [271981.714466] smpboot: CPU 3 is now offline [271981.718572] smpboot: CPU 4 is now offline [271981.720883] IRQ 23: no longer affine to CPU5 [271981.722388] smpboot: CPU 5 is now offline [271981.724641] IRQ 16: no longer affine to CPU6 [271981.726149] smpboot: CPU 6 is now offline [271981.728432] IRQ 28: no longer affine to CPU7 [271981.728435] IRQ 29: no longer affine to CPU7 [271981.728440] IRQ 33: no longer affine to CPU7 [271981.729473] smpboot: CPU 7 is now offline [271981.732055] ACPI: Low-level resume complete [271981.732109] ACPI: EC: EC started [271981.732110] PM: Restoring platform NVS memory [271981.733702] Enabling non-boot CPUs ... [271981.733761] x86: Booting SMP configuration: [271981.733762] smpboot: Booting Node 0 Processor 1 APIC 0x2 [271981.737766] CPU1 is up [271981.737824] smpboot: Booting Node 0 Processor 2 APIC 0x4 [271981.741476] CPU2 is up [271981.741517] smpboot: Booting Node 0 Processor 3 APIC 0x6 [271981.745201] CPU3 is up [271981.745243] smpboot: Booting Node 0 Processor 4 APIC 0x1 [271981.748187] CPU4 is up [271981.748223] smpboot: Booting Node 0 Processor 5 APIC 0x3 [271981.750996] CPU5 is up [271981.751030] smpboot: Booting Node 0 Processor 6 APIC 0x5 [271981.753800] CPU6 is up [271981.753833] smpboot: Booting Node 0 Processor 7 APIC 0x7 [271981.756621] CPU7 is up [271981.759071] ACPI: Waking up from system sleep state S3 [271981.852419] ACPI: EC: interrupt unblocked [271981.876322] ACPI: EC: event unblocked [271981.876361] usb usb1: root hub lost power or was reset [271981.876389] usb usb3: root hub lost power or was reset [271981.876390] usb usb4: root hub lost power or was reset [271981.876514] usb usb2: root hub lost power or was reset [271981.878169] sd 0:0:0:0: [sda] Starting disk [271981.878170] sd 1:0:0:0: [sdb] Starting disk [271981.880268] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [271981.880448] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [271981.891381] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271982.156396] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271982.188342] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [271982.190404] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271982.190407] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271982.195824] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271982.195829] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271982.197677] ata3.00: configured for UDMA/133 [271982.216977] usb 2-1: reset high-speed USB device number 2 using ehci-pci [271982.216984] usb 1-1: reset high-speed USB device number 2 using ehci-pci [271982.622985] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [271982.766950] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [271982.914950] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [271982.995117] PM: resume devices took 1.119 seconds [271982.995154] OOM killer enabled. [271982.995155] Restarting tasks ... done. [271983.204154] PM: suspend exit [271983.205619] Bluetooth: hci0: unexpected event for opcode 0x0000 [271983.956856] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [271983.959165] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [271984.161764] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271984.161769] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271984.211845] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [271984.220808] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271984.220811] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271984.257191] ata2.00: configured for UDMA/133 [271984.268857] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [271984.271138] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [271984.466832] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271984.466837] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271984.517029] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [271984.526022] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [271984.526025] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [271984.562413] ata1.00: configured for UDMA/133 [271984.888237] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271985.153249] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271985.759221] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271986.025237] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [271986.725694] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [271986.727139] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [271986.733165] wlp3s0: authenticated [271986.733272] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [271986.733798] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [271986.738218] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=5) [271986.740494] wlp3s0: associated [271986.740765] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [272012.160927] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [272012.160942] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [286923.883208] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [286924.002297] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286924.279487] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286924.912237] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286925.189269] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286925.641025] PM: suspend entry (deep) [286926.293314] Filesystems sync: 0.652 seconds [286926.350762] Freezing user space processes ... (elapsed 0.003 seconds) done. [286926.353880] OOM killer disabled. [286926.353882] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [286926.355012] printk: Suspending console(s) (use no_console_suspend to debug) [286926.368047] sd 0:0:0:0: [sda] Synchronizing SCSI cache [286926.368051] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [286926.369869] sd 1:0:0:0: [sdb] Stopping disk [286926.414219] sd 0:0:0:0: [sda] Stopping disk [286927.758586] PM: suspend devices took 1.403 seconds [286927.772324] ACPI: EC: interrupt blocked [286927.785440] ACPI: Preparing to enter system sleep state S3 [286927.858145] ACPI: EC: event blocked [286927.858147] ACPI: EC: EC stopped [286927.858148] PM: Saving platform NVS memory [286927.858279] Disabling non-boot CPUs ... [286927.860245] smpboot: CPU 1 is now offline [286927.863218] IRQ 30: no longer affine to CPU2 [286927.864246] smpboot: CPU 2 is now offline [286927.868310] smpboot: CPU 3 is now offline [286927.872338] smpboot: CPU 4 is now offline [286927.875281] IRQ 23: no longer affine to CPU5 [286927.876323] smpboot: CPU 5 is now offline [286927.878325] IRQ 16: no longer affine to CPU6 [286927.879363] smpboot: CPU 6 is now offline [286927.881368] IRQ 28: no longer affine to CPU7 [286927.881372] IRQ 29: no longer affine to CPU7 [286927.881377] IRQ 33: no longer affine to CPU7 [286927.882408] smpboot: CPU 7 is now offline [286927.885283] ACPI: Low-level resume complete [286927.885337] ACPI: EC: EC started [286927.885338] PM: Restoring platform NVS memory [286927.886879] Enabling non-boot CPUs ... [286927.886937] x86: Booting SMP configuration: [286927.886939] smpboot: Booting Node 0 Processor 1 APIC 0x2 [286927.890935] CPU1 is up [286927.891043] smpboot: Booting Node 0 Processor 2 APIC 0x4 [286927.894702] CPU2 is up [286927.894743] smpboot: Booting Node 0 Processor 3 APIC 0x6 [286927.898420] CPU3 is up [286927.898459] smpboot: Booting Node 0 Processor 4 APIC 0x1 [286927.901408] CPU4 is up [286927.901443] smpboot: Booting Node 0 Processor 5 APIC 0x3 [286927.904219] CPU5 is up [286927.904252] smpboot: Booting Node 0 Processor 6 APIC 0x5 [286927.907042] CPU6 is up [286927.907075] smpboot: Booting Node 0 Processor 7 APIC 0x7 [286927.909865] CPU7 is up [286927.912301] ACPI: Waking up from system sleep state S3 [286928.012551] ACPI: EC: interrupt unblocked [286928.036512] ACPI: EC: event unblocked [286928.036555] usb usb3: root hub lost power or was reset [286928.036557] usb usb1: root hub lost power or was reset [286928.036559] usb usb4: root hub lost power or was reset [286928.036697] usb usb2: root hub lost power or was reset [286928.040472] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [286928.040621] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [286928.046747] sd 0:0:0:0: [sda] Starting disk [286928.046806] sd 1:0:0:0: [sdb] Starting disk [286928.053427] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286928.319585] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286928.362658] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [286928.364697] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286928.364700] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286928.370100] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286928.370103] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286928.371867] ata3.00: configured for UDMA/133 [286928.375075] usb 1-1: reset high-speed USB device number 2 using ehci-pci [286928.375081] usb 2-1: reset high-speed USB device number 2 using ehci-pci [286928.781099] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [286928.925063] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [286929.073062] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [286929.153348] PM: resume devices took 1.117 seconds [286929.153390] OOM killer enabled. [286929.153391] Restarting tasks ... done. [286929.372486] PM: suspend exit [286929.373819] Bluetooth: hci0: unexpected event for opcode 0x0000 [286930.129979] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [286930.132413] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [286930.341377] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286930.341384] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286930.390962] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [286930.391516] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [286930.393295] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [286930.400501] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286930.400504] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286930.436910] ata2.00: configured for UDMA/133 [286930.599098] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286930.599105] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286930.649162] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [286930.658148] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [286930.658150] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [286930.694555] ata1.00: configured for UDMA/133 [286930.942381] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286931.208398] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286931.872036] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286932.138459] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [286932.817736] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [286932.819657] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [286932.822892] wlp3s0: authenticated [286932.823595] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [286932.823919] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [286932.830413] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [286932.834371] wlp3s0: associated [286932.834713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [286958.152540] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [286958.152554] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [296063.953269] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [296064.072366] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296064.339412] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296064.431422] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296064.701375] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296065.238364] PM: suspend entry (deep) [296065.945643] Filesystems sync: 0.707 seconds [296066.002863] Freezing user space processes ... (elapsed 0.002 seconds) done. [296066.004973] OOM killer disabled. [296066.004975] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [296066.005996] printk: Suspending console(s) (use no_console_suspend to debug) [296066.017004] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [296066.017075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [296066.018839] sd 1:0:0:0: [sdb] Stopping disk [296066.059133] sd 0:0:0:0: [sda] Stopping disk [296067.397846] PM: suspend devices took 1.392 seconds [296067.411501] ACPI: EC: interrupt blocked [296067.424532] ACPI: Preparing to enter system sleep state S3 [296067.497266] ACPI: EC: event blocked [296067.497268] ACPI: EC: EC stopped [296067.497269] PM: Saving platform NVS memory [296067.497423] Disabling non-boot CPUs ... [296067.499380] smpboot: CPU 1 is now offline [296067.502040] IRQ 30: no longer affine to CPU2 [296067.503078] smpboot: CPU 2 is now offline [296067.506525] smpboot: CPU 3 is now offline [296067.510849] smpboot: CPU 4 is now offline [296067.513216] IRQ 23: no longer affine to CPU5 [296067.514261] smpboot: CPU 5 is now offline [296067.516643] IRQ 16: no longer affine to CPU6 [296067.517683] smpboot: CPU 6 is now offline [296067.519982] IRQ 28: no longer affine to CPU7 [296067.519987] IRQ 29: no longer affine to CPU7 [296067.519993] IRQ 33: no longer affine to CPU7 [296067.521057] smpboot: CPU 7 is now offline [296067.523855] ACPI: Low-level resume complete [296067.523909] ACPI: EC: EC started [296067.523910] PM: Restoring platform NVS memory [296067.525435] Enabling non-boot CPUs ... [296067.525494] x86: Booting SMP configuration: [296067.525495] smpboot: Booting Node 0 Processor 1 APIC 0x2 [296067.529516] CPU1 is up [296067.529616] smpboot: Booting Node 0 Processor 2 APIC 0x4 [296067.533284] CPU2 is up [296067.533326] smpboot: Booting Node 0 Processor 3 APIC 0x6 [296067.536994] CPU3 is up [296067.537035] smpboot: Booting Node 0 Processor 4 APIC 0x1 [296067.539927] CPU4 is up [296067.539963] smpboot: Booting Node 0 Processor 5 APIC 0x3 [296067.542723] CPU5 is up [296067.542758] smpboot: Booting Node 0 Processor 6 APIC 0x5 [296067.545531] CPU6 is up [296067.545564] smpboot: Booting Node 0 Processor 7 APIC 0x7 [296067.548360] CPU7 is up [296067.550831] ACPI: Waking up from system sleep state S3 [296067.638642] ACPI: EC: interrupt unblocked [296067.662625] ACPI: EC: event unblocked [296067.662657] usb usb3: root hub lost power or was reset [296067.662659] usb usb4: root hub lost power or was reset [296067.662755] usb usb1: root hub lost power or was reset [296067.664273] usb usb2: root hub lost power or was reset [296067.666668] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [296067.668189] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [296067.672937] sd 0:0:0:0: [sda] Starting disk [296067.672964] sd 1:0:0:0: [sdb] Starting disk [296067.678372] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296067.983729] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [296067.985775] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296067.985779] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296067.991150] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296067.991153] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296067.992960] ata3.00: configured for UDMA/133 [296068.004219] usb 1-1: reset high-speed USB device number 2 using ehci-pci [296068.004224] usb 2-1: reset high-speed USB device number 2 using ehci-pci [296068.171454] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296068.410141] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [296068.558155] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [296068.700217] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [296068.782927] PM: resume devices took 1.120 seconds [296068.782956] OOM killer enabled. [296068.782957] Restarting tasks ... done. [296068.992947] PM: suspend exit [296068.993967] Bluetooth: hci0: unexpected event for opcode 0x0000 [296069.753086] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [296069.755399] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [296069.955369] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296069.955372] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296070.005628] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [296070.013098] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [296070.014619] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296070.014621] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296070.015687] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [296070.051202] ata2.00: configured for UDMA/133 [296070.189248] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296070.189251] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296070.239289] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [296070.248272] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [296070.248274] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [296070.284668] ata1.00: configured for UDMA/133 [296070.535461] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296070.801541] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296071.517499] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296071.784115] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [296072.514599] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [296072.515918] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [296072.519251] wlp3s0: authenticated [296072.521037] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [296072.522025] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [296072.528196] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [296072.530417] wlp3s0: associated [296072.530635] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [296097.806244] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [296097.806260] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [303376.472699] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [303376.590363] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303376.859168] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303377.415473] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303377.683478] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303378.168866] PM: suspend entry (deep) [303379.259944] Filesystems sync: 1.091 seconds [303379.317313] Freezing user space processes ... (elapsed 0.002 seconds) done. [303379.319977] OOM killer disabled. [303379.319979] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [303379.320952] printk: Suspending console(s) (use no_console_suspend to debug) [303379.327899] sd 0:0:0:0: [sda] Synchronizing SCSI cache [303379.327951] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [303379.329804] sd 1:0:0:0: [sdb] Stopping disk [303379.346858] sd 0:0:0:0: [sda] Stopping disk [303380.697318] PM: suspend devices took 1.376 seconds [303380.711622] ACPI: EC: interrupt blocked [303380.725327] ACPI: Preparing to enter system sleep state S3 [303380.798234] ACPI: EC: event blocked [303380.798236] ACPI: EC: EC stopped [303380.798237] PM: Saving platform NVS memory [303380.798366] Disabling non-boot CPUs ... [303380.800834] smpboot: CPU 1 is now offline [303380.803399] IRQ 30: no longer affine to CPU2 [303380.804427] smpboot: CPU 2 is now offline [303380.808332] smpboot: CPU 3 is now offline [303380.812353] smpboot: CPU 4 is now offline [303380.815209] IRQ 23: no longer affine to CPU5 [303380.816244] smpboot: CPU 5 is now offline [303380.819047] IRQ 16: no longer affine to CPU6 [303380.820081] smpboot: CPU 6 is now offline [303380.822694] IRQ 28: no longer affine to CPU7 [303380.822698] IRQ 29: no longer affine to CPU7 [303380.822703] IRQ 33: no longer affine to CPU7 [303380.823737] smpboot: CPU 7 is now offline [303380.826664] ACPI: Low-level resume complete [303380.826754] ACPI: EC: EC started [303380.826755] PM: Restoring platform NVS memory [303380.829433] Enabling non-boot CPUs ... [303380.829533] x86: Booting SMP configuration: [303380.829536] smpboot: Booting Node 0 Processor 1 APIC 0x2 [303380.835322] CPU1 is up [303380.835518] smpboot: Booting Node 0 Processor 2 APIC 0x4 [303380.840711] CPU2 is up [303380.840883] smpboot: Booting Node 0 Processor 3 APIC 0x6 [303380.846129] CPU3 is up [303380.846202] smpboot: Booting Node 0 Processor 4 APIC 0x1 [303380.849910] CPU4 is up [303380.849975] smpboot: Booting Node 0 Processor 5 APIC 0x3 [303380.853382] CPU5 is up [303380.853457] smpboot: Booting Node 0 Processor 6 APIC 0x5 [303380.856895] CPU6 is up [303380.856955] smpboot: Booting Node 0 Processor 7 APIC 0x7 [303380.860435] CPU7 is up [303380.864480] ACPI: Waking up from system sleep state S3 [303380.878259] ACPI: EC: interrupt unblocked [303380.902173] ACPI: EC: event unblocked [303380.902212] usb usb3: root hub lost power or was reset [303380.902217] usb usb4: root hub lost power or was reset [303380.902239] usb usb1: root hub lost power or was reset [303380.902885] mei_me 0000:00:16.0: FW not ready: resetting. [303380.902905] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [303380.904181] usb usb2: root hub lost power or was reset [303380.906187] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [303380.906378] sd 0:0:0:0: [sda] Starting disk [303380.906381] sd 1:0:0:0: [sdb] Starting disk [303380.908079] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [303380.919841] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303381.186757] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303381.213942] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [303381.216014] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303381.216020] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303381.221405] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303381.221437] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303381.223247] ata3.00: configured for UDMA/133 [303381.242497] usb 2-1: reset high-speed USB device number 2 using ehci-pci [303381.243472] usb 1-1: reset high-speed USB device number 2 using ehci-pci [303381.648479] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [303381.796539] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [303381.940468] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [303382.020866] PM: resume devices took 1.119 seconds [303382.020933] OOM killer enabled. [303382.020935] Restarting tasks ... done. [303382.227587] PM: suspend exit [303382.228503] Bluetooth: hci0: unexpected event for opcode 0x0000 [303383.089396] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [303383.091710] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [303383.270780] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303383.270784] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303383.297379] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [303383.299696] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [303383.320880] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [303383.329846] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303383.329850] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303383.366225] ata2.00: configured for UDMA/133 [303383.502077] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303383.502081] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303383.552123] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [303383.561110] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [303383.561112] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [303383.597502] ata1.00: configured for UDMA/133 [303383.832799] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303384.098883] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303384.864756] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303385.130978] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [303385.796346] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [303385.799450] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [303385.802393] wlp3s0: authenticated [303385.802475] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [303385.803327] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [303385.812832] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=5) [303385.817058] wlp3s0: associated [303385.817356] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [308264.621979] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [308264.734051] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308265.002487] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308265.673660] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308265.942628] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308266.460134] PM: suspend entry (deep) [308267.186738] Filesystems sync: 0.726 seconds [308267.244408] Freezing user space processes ... (elapsed 0.002 seconds) done. [308267.247299] OOM killer disabled. [308267.247300] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [308267.248579] printk: Suspending console(s) (use no_console_suspend to debug) [308267.265582] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [308267.266543] sd 0:0:0:0: [sda] Synchronizing SCSI cache [308267.267386] sd 1:0:0:0: [sdb] Stopping disk [308267.330876] sd 0:0:0:0: [sda] Stopping disk [308268.684834] PM: suspend devices took 1.436 seconds [308268.698083] ACPI: EC: interrupt blocked [308268.712030] ACPI: Preparing to enter system sleep state S3 [308268.784936] ACPI: EC: event blocked [308268.784938] ACPI: EC: EC stopped [308268.784939] PM: Saving platform NVS memory [308268.785094] Disabling non-boot CPUs ... [308268.787022] smpboot: CPU 1 is now offline [308268.790023] IRQ 30: no longer affine to CPU2 [308268.791057] smpboot: CPU 2 is now offline [308268.794983] smpboot: CPU 3 is now offline [308268.799444] smpboot: CPU 4 is now offline [308268.801964] IRQ 23: no longer affine to CPU5 [308268.802989] smpboot: CPU 5 is now offline [308268.805191] IRQ 16: no longer affine to CPU6 [308268.806268] smpboot: CPU 6 is now offline [308268.808675] IRQ 28: no longer affine to CPU7 [308268.808680] IRQ 29: no longer affine to CPU7 [308268.808685] IRQ 33: no longer affine to CPU7 [308268.809722] smpboot: CPU 7 is now offline [308268.812588] ACPI: Low-level resume complete [308268.812643] ACPI: EC: EC started [308268.812644] PM: Restoring platform NVS memory [308268.814181] Enabling non-boot CPUs ... [308268.814237] x86: Booting SMP configuration: [308268.814239] smpboot: Booting Node 0 Processor 1 APIC 0x2 [308268.818261] CPU1 is up [308268.818364] smpboot: Booting Node 0 Processor 2 APIC 0x4 [308268.822025] CPU2 is up [308268.822066] smpboot: Booting Node 0 Processor 3 APIC 0x6 [308268.825732] CPU3 is up [308268.825772] smpboot: Booting Node 0 Processor 4 APIC 0x1 [308268.828680] CPU4 is up [308268.828716] smpboot: Booting Node 0 Processor 5 APIC 0x3 [308268.831476] CPU5 is up [308268.831510] smpboot: Booting Node 0 Processor 6 APIC 0x5 [308268.834283] CPU6 is up [308268.834316] smpboot: Booting Node 0 Processor 7 APIC 0x7 [308268.837116] CPU7 is up [308268.839572] ACPI: Waking up from system sleep state S3 [308269.797338] ACPI: EC: interrupt unblocked [308269.821211] ACPI: EC: event unblocked [308269.821251] usb usb1: root hub lost power or was reset [308269.821263] usb usb3: root hub lost power or was reset [308269.821265] usb usb4: root hub lost power or was reset [308269.821325] usb usb2: root hub lost power or was reset [308269.821633] mei_me 0000:00:16.0: FW not ready: resetting. [308269.821647] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [308269.823445] sd 0:0:0:0: [sda] Starting disk [308269.823448] sd 1:0:0:0: [sdb] Starting disk [308269.825153] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [308269.825270] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [308269.835214] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308270.100180] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308270.138339] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [308270.140383] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308270.140387] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308270.145825] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308270.145827] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308270.147612] ata3.00: configured for UDMA/133 [308270.158856] usb 2-1: reset high-speed USB device number 2 using ehci-pci [308270.158862] usb 1-1: reset high-speed USB device number 2 using ehci-pci [308270.564869] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [308270.708823] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [308270.850843] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [308271.019358] PM: resume devices took 1.198 seconds [308271.019401] OOM killer enabled. [308271.019402] Restarting tasks ... done. [308271.066815] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [308271.069695] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [308271.235926] PM: suspend exit [308271.237484] Bluetooth: hci0: unexpected event for opcode 0x0000 [308271.255122] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308271.255131] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308271.277785] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [308271.279382] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [308271.288451] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308271.288458] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308271.306103] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [308271.315112] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308271.315122] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308271.339028] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [308271.348015] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [308271.348025] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [308271.351505] ata2.00: configured for UDMA/133 [308271.384407] ata1.00: configured for UDMA/133 [308273.871149] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308274.138415] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308274.854158] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308275.120096] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [308275.775960] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [308275.777200] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [308275.781766] wlp3s0: authenticated [308275.781877] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [308275.782667] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [308275.786579] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=5) [308275.789369] wlp3s0: associated [308275.789752] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [308278.375012] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [311142.549504] nouveau 0000:01:00.0: Enabling HDA controller [312645.707039] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [312645.826211] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312646.096392] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312646.803162] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312647.071420] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312647.589506] PM: suspend entry (deep) [312648.634486] Filesystems sync: 1.044 seconds [312648.691864] Freezing user space processes ... (elapsed 0.002 seconds) done. [312648.694791] OOM killer disabled. [312648.694793] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [312648.695771] printk: Suspending console(s) (use no_console_suspend to debug) [312648.707845] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [312648.707876] sd 0:0:0:0: [sda] Synchronizing SCSI cache [312648.709754] sd 1:0:0:0: [sdb] Stopping disk [312648.776729] sd 0:0:0:0: [sda] Stopping disk [312650.124197] PM: suspend devices took 1.428 seconds [312650.138289] ACPI: EC: interrupt blocked [312650.151321] ACPI: Preparing to enter system sleep state S3 [312650.224052] ACPI: EC: event blocked [312650.224054] ACPI: EC: EC stopped [312650.224055] PM: Saving platform NVS memory [312650.224209] Disabling non-boot CPUs ... [312650.226181] smpboot: CPU 1 is now offline [312650.228801] IRQ 30: no longer affine to CPU2 [312650.229843] smpboot: CPU 2 is now offline [312650.233406] smpboot: CPU 3 is now offline [312650.237095] smpboot: CPU 4 is now offline [312650.240121] IRQ 23: no longer affine to CPU5 [312650.241164] smpboot: CPU 5 is now offline [312650.243483] IRQ 16: no longer affine to CPU6 [312650.244531] smpboot: CPU 6 is now offline [312650.246942] IRQ 28: no longer affine to CPU7 [312650.246948] IRQ 29: no longer affine to CPU7 [312650.246953] IRQ 33: no longer affine to CPU7 [312650.247990] smpboot: CPU 7 is now offline [312650.250834] ACPI: Low-level resume complete [312650.250890] ACPI: EC: EC started [312650.250891] PM: Restoring platform NVS memory [312650.252442] Enabling non-boot CPUs ... [312650.252499] x86: Booting SMP configuration: [312650.252500] smpboot: Booting Node 0 Processor 1 APIC 0x2 [312650.256523] CPU1 is up [312650.256624] smpboot: Booting Node 0 Processor 2 APIC 0x4 [312650.260305] CPU2 is up [312650.260345] smpboot: Booting Node 0 Processor 3 APIC 0x6 [312650.264026] CPU3 is up [312650.264066] smpboot: Booting Node 0 Processor 4 APIC 0x1 [312650.267017] CPU4 is up [312650.267053] smpboot: Booting Node 0 Processor 5 APIC 0x3 [312650.269819] CPU5 is up [312650.269854] smpboot: Booting Node 0 Processor 6 APIC 0x5 [312650.272631] CPU6 is up [312650.272664] smpboot: Booting Node 0 Processor 7 APIC 0x7 [312650.275450] CPU7 is up [312650.277882] ACPI: Waking up from system sleep state S3 [312650.386447] ACPI: EC: interrupt unblocked [312650.411350] ACPI: EC: event unblocked [312650.411410] usb usb3: root hub lost power or was reset [312650.411413] usb usb4: root hub lost power or was reset [312650.412888] usb usb1: root hub lost power or was reset [312650.412958] usb usb2: root hub lost power or was reset [312650.415810] mei_me 0000:00:16.0: FW not ready: resetting. [312650.415827] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [312650.416789] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [312650.416848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [312650.421631] sd 0:0:0:0: [sda] Starting disk [312650.421638] sd 1:0:0:0: [sdb] Starting disk [312650.425181] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312650.692130] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312650.737406] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [312650.739359] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312650.739364] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312650.744922] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312650.744926] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312650.746678] ata3.00: configured for UDMA/133 [312650.749973] usb 2-1: reset high-speed USB device number 2 using ehci-pci [312650.749979] usb 1-1: reset high-speed USB device number 2 using ehci-pci [312651.155967] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [312651.304005] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [312651.446968] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [312651.527315] PM: resume devices took 1.116 seconds [312651.527357] OOM killer enabled. [312651.527358] Restarting tasks ... done. [312651.725693] PM: suspend exit [312651.727113] Bluetooth: hci0: unexpected event for opcode 0x0000 [312652.504887] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [312652.507192] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [312652.690859] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312652.690878] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312652.740898] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [312652.749882] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312652.749885] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312652.769880] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [312652.772169] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [312652.786273] ata2.00: configured for UDMA/133 [312652.940864] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312652.940869] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312652.990992] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [312652.999999] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [312653.000002] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [312653.036431] ata1.00: configured for UDMA/133 [312653.304286] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312653.570314] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312654.179263] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312654.445360] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [312655.110665] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [312655.111961] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [312655.115220] wlp3s0: authenticated [312655.115294] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [312655.115828] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [312655.119666] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=5) [312655.124101] wlp3s0: associated [312655.124422] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [316225.880511] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [316225.927793] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316226.196507] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316226.813444] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316227.090577] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316227.627410] PM: suspend entry (deep) [316228.596027] Filesystems sync: 0.968 seconds [316228.653490] Freezing user space processes ... (elapsed 0.002 seconds) done. [316228.656304] OOM killer disabled. [316228.656306] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [316228.657294] printk: Suspending console(s) (use no_console_suspend to debug) [316228.676631] sd 0:0:0:0: [sda] Synchronizing SCSI cache [316228.676828] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [316228.678651] sd 1:0:0:0: [sdb] Stopping disk [316228.750105] sd 0:0:0:0: [sda] Stopping disk [316230.097036] PM: suspend devices took 1.439 seconds [316230.110801] ACPI: EC: interrupt blocked [316230.123860] ACPI: Preparing to enter system sleep state S3 [316230.196586] ACPI: EC: event blocked [316230.196587] ACPI: EC: EC stopped [316230.196589] PM: Saving platform NVS memory [316230.196731] Disabling non-boot CPUs ... [316230.199284] smpboot: CPU 1 is now offline [316230.201850] IRQ 30: no longer affine to CPU2 [316230.202889] smpboot: CPU 2 is now offline [316230.206328] smpboot: CPU 3 is now offline [316230.210021] smpboot: CPU 4 is now offline [316230.212996] IRQ 23: no longer affine to CPU5 [316230.214036] smpboot: CPU 5 is now offline [316230.216500] IRQ 16: no longer affine to CPU6 [316230.217545] smpboot: CPU 6 is now offline [316230.219867] IRQ 28: no longer affine to CPU7 [316230.219872] IRQ 29: no longer affine to CPU7 [316230.219877] IRQ 33: no longer affine to CPU7 [316230.220918] smpboot: CPU 7 is now offline [316230.223663] ACPI: Low-level resume complete [316230.223720] ACPI: EC: EC started [316230.223721] PM: Restoring platform NVS memory [316230.225328] Enabling non-boot CPUs ... [316230.225385] x86: Booting SMP configuration: [316230.225386] smpboot: Booting Node 0 Processor 1 APIC 0x2 [316230.229380] CPU1 is up [316230.229490] smpboot: Booting Node 0 Processor 2 APIC 0x4 [316230.233147] CPU2 is up [316230.233187] smpboot: Booting Node 0 Processor 3 APIC 0x6 [316230.236868] CPU3 is up [316230.236908] smpboot: Booting Node 0 Processor 4 APIC 0x1 [316230.239860] CPU4 is up [316230.239896] smpboot: Booting Node 0 Processor 5 APIC 0x3 [316230.242668] CPU5 is up [316230.242702] smpboot: Booting Node 0 Processor 6 APIC 0x5 [316230.245484] CPU6 is up [316230.245517] smpboot: Booting Node 0 Processor 7 APIC 0x7 [316230.248310] CPU7 is up [316230.250755] ACPI: Waking up from system sleep state S3 [316230.344968] ACPI: EC: interrupt unblocked [316230.369891] ACPI: EC: event unblocked [316230.369934] usb usb1: root hub lost power or was reset [316230.369936] usb usb3: root hub lost power or was reset [316230.369938] usb usb4: root hub lost power or was reset [316230.370071] usb usb2: root hub lost power or was reset [316230.373872] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [316230.373993] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [316230.374186] sd 0:0:0:0: [sda] Starting disk [316230.374188] sd 1:0:0:0: [sdb] Starting disk [316230.378908] mei_me 0000:00:16.0: FW not ready: resetting. [316230.378924] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [316230.386864] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316230.653342] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316230.682882] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [316230.685055] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316230.685059] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316230.690378] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316230.690384] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316230.692189] ata3.00: configured for UDMA/133 [316230.711506] usb 1-1: reset high-speed USB device number 2 using ehci-pci [316230.711511] usb 2-1: reset high-speed USB device number 2 using ehci-pci [316231.117486] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [316231.265518] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [316231.409441] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [316231.489874] PM: resume devices took 1.120 seconds [316231.489916] OOM killer enabled. [316231.489917] Restarting tasks ... done. [316231.759918] PM: suspend exit [316231.761194] Bluetooth: hci0: unexpected event for opcode 0x0000 [316232.452402] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [316232.454715] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [316232.653258] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316232.653262] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316232.703287] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [316232.711406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [316232.712275] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316232.712278] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316232.712723] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [316232.721771] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316232.721774] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316232.748677] ata2.00: configured for UDMA/133 [316232.772037] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [316232.781019] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [316232.781029] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [316232.817386] ata1.00: configured for UDMA/133 [316233.403812] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316233.668808] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316234.312764] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316234.579057] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [316235.193527] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [316235.195889] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [316235.200099] wlp3s0: authenticated [316235.200208] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT/HE due to WEP/TKIP use [316235.200341] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [316235.204560] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=5) [316235.206937] wlp3s0: associated [316235.207194] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [326875.042027] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [326875.092841] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326875.360684] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326876.007290] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326876.276058] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326876.776442] PM: suspend entry (deep) [326877.641467] Filesystems sync: 0.865 seconds [326877.699301] Freezing user space processes ... (elapsed 0.002 seconds) done. [326877.702137] OOM killer disabled. [326877.702138] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [326877.703169] printk: Suspending console(s) (use no_console_suspend to debug) [326877.713042] sd 0:0:0:0: [sda] Synchronizing SCSI cache [326877.713050] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [326877.714935] sd 1:0:0:0: [sdb] Stopping disk [326877.789663] sd 0:0:0:0: [sda] Stopping disk [326879.130654] PM: suspend devices took 1.427 seconds [326879.144601] ACPI: EC: interrupt blocked [326879.157679] ACPI: Preparing to enter system sleep state S3 [326879.229295] ACPI: EC: event blocked [326879.229296] ACPI: EC: EC stopped [326879.229297] PM: Saving platform NVS memory [326879.229425] Disabling non-boot CPUs ... [326879.231410] smpboot: CPU 1 is now offline [326879.233700] IRQ 30: no longer affine to CPU2 [326879.234733] smpboot: CPU 2 is now offline [326879.238346] smpboot: CPU 3 is now offline [326879.241675] smpboot: CPU 4 is now offline [326879.243598] IRQ 23: no longer affine to CPU5 [326879.244628] smpboot: CPU 5 is now offline [326879.246760] IRQ 16: no longer affine to CPU6 [326879.248279] smpboot: CPU 6 is now offline [326879.250723] IRQ 28: no longer affine to CPU7 [326879.250726] IRQ 29: no longer affine to CPU7 [326879.250731] IRQ 33: no longer affine to CPU7 [326879.251758] smpboot: CPU 7 is now offline [326879.254477] ACPI: Low-level resume complete [326879.254532] ACPI: EC: EC started [326879.254533] PM: Restoring platform NVS memory [326879.256222] Enabling non-boot CPUs ... [326879.256281] x86: Booting SMP configuration: [326879.256282] smpboot: Booting Node 0 Processor 1 APIC 0x2 [326879.260283] CPU1 is up [326879.260341] smpboot: Booting Node 0 Processor 2 APIC 0x4 [326879.264004] CPU2 is up [326879.264044] smpboot: Booting Node 0 Processor 3 APIC 0x6 [326879.267716] CPU3 is up [326879.267757] smpboot: Booting Node 0 Processor 4 APIC 0x1 [326879.270686] CPU4 is up [326879.270721] smpboot: Booting Node 0 Processor 5 APIC 0x3 [326879.273495] CPU5 is up [326879.273529] smpboot: Booting Node 0 Processor 6 APIC 0x5 [326879.276315] CPU6 is up [326879.276347] smpboot: Booting Node 0 Processor 7 APIC 0x7 [326879.279136] CPU7 is up [326879.281578] ACPI: Waking up from system sleep state S3 [326879.403745] ACPI: EC: interrupt unblocked [326879.428624] ACPI: EC: event unblocked [326879.428680] usb usb3: root hub lost power or was reset [326879.428683] usb usb4: root hub lost power or was reset [326879.428790] usb usb1: root hub lost power or was reset [326879.428950] usb usb2: root hub lost power or was reset [326879.432695] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [326879.432847] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [326879.434630] mei_me 0000:00:16.0: FW not ready: resetting. [326879.434644] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [326879.438898] sd 1:0:0:0: [sdb] Starting disk [326879.438923] sd 0:0:0:0: [sda] Starting disk [326879.442606] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326879.753750] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [326879.755335] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326879.755338] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326879.757895] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326879.757900] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326879.758913] ata3.00: configured for UDMA/133 [326879.766291] usb 1-1: reset high-speed USB device number 2 using ehci-pci [326879.766298] usb 2-1: reset high-speed USB device number 2 using ehci-pci [326879.936620] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326880.172273] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [326880.314330] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [326880.458276] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [326880.626466] PM: resume devices took 1.198 seconds [326880.626507] OOM killer enabled. [326880.626508] Restarting tasks ... done. [326880.880722] PM: suspend exit [326880.881989] Bluetooth: hci0: unexpected event for opcode 0x0000 [326881.521189] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [326881.523947] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [326881.710378] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326881.710381] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326881.730176] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [326881.732594] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [326881.760493] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [326881.769484] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326881.769487] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326881.805897] ata2.00: configured for UDMA/133 [326881.927857] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326881.927870] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326881.977903] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [326881.986894] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [326881.986896] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [326882.023300] ata1.00: configured for UDMA/133 [326882.275566] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326882.541581] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326883.153347] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326883.419831] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [326883.970814] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [326883.973623] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [326883.974420] wlp3s0: authenticated [326883.975127] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [326883.978182] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [326883.996835] wlp3s0: associated [326884.147744] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [326884.342677] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [326945.681699] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [326945.702105] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [326945.706701] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [326945.708362] wlp3s0: authenticated [326945.709149] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [326945.762249] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [326945.766106] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [326945.785174] wlp3s0: associated [326945.864311] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [327103.448093] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [327103.508424] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [327103.776162] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [327104.309627] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [327104.576304] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [327105.100384] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327105.103439] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327105.106597] wlp3s0: authenticated [327105.106866] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [327105.187795] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327105.291836] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [327105.293401] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [327105.293408] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [327105.440983] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327105.444355] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327105.445088] wlp3s0: authenticated [327105.446791] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327105.448305] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [327105.448316] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [327105.598957] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327105.600411] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327105.601331] wlp3s0: authenticated [327105.601776] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327105.603477] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x421 status=12 aid=0) [327105.603485] wlp3s0: XX:XX:XX:XX:XX:XX denied association (code=12) [327106.170178] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327106.173447] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327106.174118] wlp3s0: authenticated [327106.176787] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327106.179776] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [327106.199094] wlp3s0: associated [327106.200223] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [327106.604896] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [327137.527018] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [327137.545640] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327137.548424] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327137.550506] wlp3s0: authenticated [327137.551150] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327137.555314] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [327137.574901] wlp3s0: associated [327137.646060] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [327864.204543] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327864.208968] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327864.209666] wlp3s0: authenticated [327864.210502] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [327864.295016] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327864.298249] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [327864.319163] wlp3s0: associated [327864.396418] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [327895.619973] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [327895.638826] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [327895.642728] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [327895.644383] wlp3s0: authenticated [327895.645451] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [327895.649070] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=7) [327895.668017] wlp3s0: associated [327895.699905] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [328197.599477] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [328197.603583] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [328197.604238] wlp3s0: authenticated [328197.605205] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [328197.702891] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [328197.706058] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [328197.726140] wlp3s0: associated [328197.804962] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [328228.414149] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [328228.433082] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [328228.437352] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [328228.438884] wlp3s0: authenticated [328228.439288] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [328228.442917] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=10) [328228.462383] wlp3s0: associated [328228.493864] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [328928.109475] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [328928.113732] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [328928.114469] wlp3s0: authenticated [328928.115959] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [328928.211988] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [328928.215159] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [328928.236444] wlp3s0: associated [328928.313559] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [328959.439697] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [328959.458885] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [328959.464087] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [328959.465725] wlp3s0: authenticated [328959.466245] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [328959.514290] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [328959.518151] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=12) [328959.537825] wlp3s0: associated [328959.616584] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [329260.655144] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [329260.659662] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [329260.660434] wlp3s0: authenticated [329260.660646] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [329260.698624] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [329260.701866] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [329260.722618] wlp3s0: associated [329260.800422] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [329292.228392] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [329292.247957] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [329292.252633] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [329292.254242] wlp3s0: authenticated [329292.254974] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [329292.258616] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=14) [329292.278050] wlp3s0: associated [329292.308037] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [330026.845583] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [330026.849286] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [330026.850087] wlp3s0: authenticated [330026.852110] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [330027.106528] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [330027.110506] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [330027.111176] wlp3s0: authenticated [330027.112022] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [330027.115899] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [330027.135944] wlp3s0: associated [330027.148698] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [330058.479974] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [330058.499356] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [330058.503066] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [330058.504658] wlp3s0: authenticated [330058.505425] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [330058.509036] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=16) [330058.528101] wlp3s0: associated [330058.553207] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [330545.370668] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [330545.374638] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [330545.375374] wlp3s0: authenticated [330545.376411] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [330545.386225] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [330545.389474] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [330545.410542] wlp3s0: associated [330545.488116] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [330576.711659] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [330576.730360] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [330576.734254] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [330576.735968] wlp3s0: authenticated [330576.736611] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [330576.740332] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=18) [330576.760240] wlp3s0: associated [330576.790269] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331126.038501] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331126.042671] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331126.043399] wlp3s0: authenticated [331126.043817] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [331126.086091] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331126.089227] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [331126.108465] wlp3s0: associated [331126.188238] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331190.385011] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [331190.404192] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331190.408949] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331190.410551] wlp3s0: authenticated [331190.411291] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [331190.463892] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331190.467689] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=18) [331190.489094] wlp3s0: associated [331190.769487] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331221.774652] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331221.779602] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331221.780376] wlp3s0: authenticated [331221.780439] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [331221.828262] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331221.831441] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [331221.852441] wlp3s0: associated [331221.930524] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331284.078594] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [331284.097112] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331284.101636] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331284.103229] wlp3s0: authenticated [331284.103855] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [331284.157083] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331284.160909] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=20) [331284.180125] wlp3s0: associated [331284.259083] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331378.671769] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331378.675550] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331378.676250] wlp3s0: authenticated [331378.676971] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [331378.702254] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331378.705382] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [331378.725079] wlp3s0: associated [331378.804517] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [331410.028287] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [331410.047034] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [331410.051716] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [331410.053381] wlp3s0: authenticated [331410.054632] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [331410.058358] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=18) [331410.077446] wlp3s0: associated [331410.208683] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [333157.877979] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 1=UNSPECIFIED) [333158.042144] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [333158.046732] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [333158.047438] wlp3s0: authenticated [333158.047616] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [333158.075551] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [333158.078771] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [333158.098809] wlp3s0: associated [333158.177854] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [333190.835239] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [333190.854403] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [333190.858561] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [333190.860124] wlp3s0: authenticated [333190.860508] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [333190.912971] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [333190.916843] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=21) [333190.937148] wlp3s0: associated [333191.014552] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334394.898144] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334394.901837] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334394.902515] wlp3s0: authenticated [334394.903172] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [334394.906367] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [334394.925209] wlp3s0: associated [334394.943211] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334428.215257] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [334428.234053] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334428.238529] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334428.240236] wlp3s0: authenticated [334428.242523] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [334428.246186] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=23) [334428.265577] wlp3s0: associated [334428.393656] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334543.622160] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334543.625981] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334543.626764] wlp3s0: authenticated [334543.628523] wlp3s0: waiting for beacon from XX:XX:XX:XX:XX:XX [334543.882057] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334543.886016] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334543.886872] wlp3s0: authenticated [334543.889358] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [334543.892635] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [334543.913165] wlp3s0: associated [334543.999561] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334575.427947] wlp3s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [334575.447173] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334575.450888] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334575.452482] wlp3s0: authenticated [334575.454735] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [334575.458346] wlp3s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=23) [334575.477916] wlp3s0: associated [334575.539785] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334687.235572] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [334687.293123] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334687.561726] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334688.097086] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334688.365223] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334688.878377] PM: suspend entry (deep) [334689.566820] Filesystems sync: 0.688 seconds [334689.623674] Freezing user space processes ... (elapsed 0.002 seconds) done. [334689.626283] OOM killer disabled. [334689.626285] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [334689.627727] printk: Suspending console(s) (use no_console_suspend to debug) [334689.637663] sd 0:0:0:0: [sda] Synchronizing SCSI cache [334689.637722] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [334689.639595] sd 1:0:0:0: [sdb] Stopping disk [334689.721877] sd 0:0:0:0: [sda] Stopping disk [334691.068870] PM: suspend devices took 1.441 seconds [334691.082286] ACPI: EC: interrupt blocked [334691.095273] ACPI: Preparing to enter system sleep state S3 [334691.168000] ACPI: EC: event blocked [334691.168002] ACPI: EC: EC stopped [334691.168003] PM: Saving platform NVS memory [334691.168155] Disabling non-boot CPUs ... [334691.170708] smpboot: CPU 1 is now offline [334691.173345] IRQ 30: no longer affine to CPU2 [334691.174378] smpboot: CPU 2 is now offline [334691.177809] smpboot: CPU 3 is now offline [334691.181402] smpboot: CPU 4 is now offline [334691.183930] IRQ 23: no longer affine to CPU5 [334691.184964] smpboot: CPU 5 is now offline [334691.187455] IRQ 16: no longer affine to CPU6 [334691.188496] smpboot: CPU 6 is now offline [334691.190853] IRQ 28: no longer affine to CPU7 [334691.190858] IRQ 29: no longer affine to CPU7 [334691.190863] IRQ 33: no longer affine to CPU7 [334691.191947] smpboot: CPU 7 is now offline [334691.194833] ACPI: Low-level resume complete [334691.194888] ACPI: EC: EC started [334691.194889] PM: Restoring platform NVS memory [334691.196429] Enabling non-boot CPUs ... [334691.196487] x86: Booting SMP configuration: [334691.196488] smpboot: Booting Node 0 Processor 1 APIC 0x2 [334691.200507] CPU1 is up [334691.200563] smpboot: Booting Node 0 Processor 2 APIC 0x4 [334691.204237] CPU2 is up [334691.204278] smpboot: Booting Node 0 Processor 3 APIC 0x6 [334691.207964] CPU3 is up [334691.208005] smpboot: Booting Node 0 Processor 4 APIC 0x1 [334691.210948] CPU4 is up [334691.210984] smpboot: Booting Node 0 Processor 5 APIC 0x3 [334691.213751] CPU5 is up [334691.213785] smpboot: Booting Node 0 Processor 6 APIC 0x5 [334691.216564] CPU6 is up [334691.216597] smpboot: Booting Node 0 Processor 7 APIC 0x7 [334691.219389] CPU7 is up [334691.221852] ACPI: Waking up from system sleep state S3 [334691.330393] ACPI: EC: interrupt unblocked [334691.355300] ACPI: EC: event unblocked [334691.355345] usb usb1: root hub lost power or was reset [334691.355389] usb usb3: root hub lost power or was reset [334691.355391] usb usb4: root hub lost power or was reset [334691.355394] usb usb2: root hub lost power or was reset [334691.359267] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [334691.359321] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [334691.359329] sd 0:0:0:0: [sda] Starting disk [334691.359352] sd 1:0:0:0: [sdb] Starting disk [334691.360392] mei_me 0000:00:16.0: FW not ready: resetting. [334691.360404] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [334691.372274] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334691.667283] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [334691.669375] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334691.669379] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334691.674731] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334691.674737] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334691.676569] ata3.00: configured for UDMA/133 [334691.695937] usb 1-1: reset high-speed USB device number 2 using ehci-pci [334691.695943] usb 2-1: reset high-speed USB device number 2 using ehci-pci [334691.863898] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334692.101959] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [334692.245915] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [334692.393906] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [334692.474052] PM: resume devices took 1.119 seconds [334692.474091] OOM killer enabled. [334692.474092] Restarting tasks ... done. [334692.687077] PM: suspend exit [334692.688588] Bluetooth: hci0: unexpected event for opcode 0x0000 [334693.490890] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [334693.493281] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [334693.676770] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334693.676774] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334693.726897] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [334693.735858] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334693.735861] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334693.748823] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [334693.751187] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [334693.772234] ata2.00: configured for UDMA/133 [334693.914978] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334693.914982] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334693.965365] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [334693.974386] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [334693.974390] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [334694.010831] ata1.00: configured for UDMA/133 [334694.326215] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334694.592234] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334695.206228] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334695.472504] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0 [334695.994091] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [334695.996579] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [334695.997317] wlp3s0: authenticated [334695.999776] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [334696.002840] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [334696.021788] wlp3s0: associated [334696.044082] wlp3s0: Limiting TX power to 18 (18 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [334696.312516] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [335797.174984] systemd-sysv-generator[188844]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [335797.175106] systemd-sysv-generator[188844]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [335797.183559] zram_generator::generator[188846]: Creating dev-zram0.swap for /dev/zram0 (4096MB) [335818.887187] st: Version 20160209, fixed bufsize 32768, s/g segs 256