[ 0.000000] microcode: microcode updated early to revision 0x70a, date = 2010-09-29 [ 0.000000] Linux version 5.8.0-44-generic (XXX@XXX) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 (Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=HASH_8F2-091D-CC19-5068-E5DB530DCE55 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP35-DS3R/EP35-DS3R, BIOS F1 12/13/2007 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2666.701 MHz processor [ 0.001132] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001134] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001138] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000 [ 0.001143] MTRR default type: uncachable [ 0.001144] MTRR fixed ranges enabled: [ 0.001145] 00000-9FFFF write-back [ 0.001146] A0000-BFFFF uncachable [ 0.001147] C0000-CDFFF write-protect [ 0.001148] CE000-EFFFF uncachable [ 0.001149] F0000-FFFFF write-through [ 0.001150] MTRR variable ranges enabled: [ 0.001152] 0 base 000000000 mask F80000000 write-back [ 0.001153] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.001154] 2 disabled [ 0.001154] 3 disabled [ 0.001155] 4 disabled [ 0.001155] 5 disabled [ 0.001156] 6 disabled [ 0.001157] 7 disabled [ 0.002584] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002683] total RAM covered: 2047M [ 0.003008] Found optimal setting for mtrr clean up [ 0.003010] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.010129] found SMP MP-table at [mem 0x000f51f0-0x000f51ff] [ 0.021634] check: Scanning 1 areas for low memory corruption [ 0.021962] RAMDISK: [mem 0x31ca3000-0x34e48fff] [ 0.021972] ACPI: Early table checksum verification disabled [ 0.021977] ACPI: RSDP 0x00000000000F6BE0 000014 (v00 GBT ) [ 0.021980] ACPI: RSDT 0x000000007FEE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.021987] ACPI: FACP 0x000000007FEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.021993] ACPI: DSDT 0x000000007FEE3180 004B32 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.021997] ACPI: FACS 0x000000007FEE0000 000040 [ 0.022000] ACPI: HPET 0x000000007FEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.022003] ACPI: MCFG 0x000000007FEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022007] ACPI: APIC 0x000000007FEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022010] ACPI: SSDT 0x000000007FEE7F00 00015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.022014] ACPI: SSDT 0x000000007FEE84B0 000275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.022027] ACPI: Local APIC address 0xfee00000 [ 0.022110] No NUMA configuration found [ 0.022111] Faking a node at [mem 0x0000000000000000-0x000000007fedffff] [ 0.022122] NODE_DATA(0) allocated [mem 0x7feb6000-0x7fedffff] [ 0.022536] Zone ranges: [ 0.022537] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.022538] DMA32 [mem 0x0000000001000000-0x000000007fedffff] [ 0.022539] Normal empty [ 0.022540] Device empty [ 0.022541] Movable zone start for each node [ 0.022544] Early memory node ranges [ 0.022545] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.022546] node 0: [mem 0x0000000000100000-0x000000007fedffff] [ 0.022553] Zeroed struct page in unavailable ranges: 386 pages [ 0.022554] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fedffff] [ 0.022556] On node 0 totalpages: 523902 [ 0.022557] DMA zone: 64 pages used for memmap [ 0.022557] DMA zone: 21 pages reserved [ 0.022558] DMA zone: 3998 pages, LIFO batch:0 [ 0.022608] DMA32 zone: 8124 pages used for memmap [ 0.022609] DMA32 zone: 519904 pages, LIFO batch:63 [ 0.037831] ACPI: PM-Timer IO Port: 0x408 [ 0.037835] ACPI: Local APIC address 0xfee00000 [ 0.037847] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.037848] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.037849] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.037850] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.037862] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.037864] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.037866] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.037868] ACPI: IRQ0 used by override. [ 0.037869] ACPI: IRQ9 used by override. [ 0.037871] Using ACPI (MADT) for SMP configuration information [ 0.037873] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.037880] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.037896] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.037898] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.037899] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.037899] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.037902] [mem 0x7ff00000-0xefffffff] available for PCI devices [ 0.037903] Booting paravirtualized kernel on bare hardware [ 0.037908] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.037918] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.038877] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.038882] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.038883] pcpu-alloc: [0] 0 1 2 3 [ 0.038916] Built 1 zonelists, mobility grouping on. Total pages: 515693 [ 0.038917] Policy zone: DMA32 [ 0.038919] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=HASH_8F2-091D-CC19-5068-E5DB530DCE55 ro quiet splash vt.handoff=7 [ 0.039795] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.040167] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.040227] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.059414] Memory: 1974908K/2095608K available (14339K kernel code, 2537K rwdata, 5388K rodata, 2640K init, 4920K bss, 120700K reserved, 0K cma-reserved) [ 0.059429] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.059623] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.059646] Kernel/User page tables isolation: enabled [ 0.059674] ftrace: allocating 46218 entries in 181 pages [ 0.079155] ftrace: allocated 181 pages with 5 groups [ 0.079387] rcu: Hierarchical RCU implementation. [ 0.079389] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.079390] Trampoline variant of Tasks RCU enabled. [ 0.079390] Rude variant of Tasks RCU enabled. [ 0.079391] Tracing variant of Tasks RCU enabled. [ 0.079392] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.079393] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.083387] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.083638] vt handoff: transparent VT on vt#7 [ 0.083647] Console: colour dummy device 80x25 [ 0.083652] printk: console [tty0] enabled [ 0.083677] ACPI: Core revision 20200528 [ 0.083750] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.083762] APIC: Switch to symmetric I/O mode setup [ 0.084118] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.103762] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26705e0647d, max_idle_ns: 440795237587 ns [ 0.103767] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.40 BogoMIPS (lpj=10666804) [ 0.103769] pid_max: default: 32768 minimum: 301 [ 0.103803] LSM: Security Framework initializing [ 0.103814] Yama: becoming mindful. [ 0.103852] AppArmor: AppArmor initialized [ 0.103900] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.103913] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.104251] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.104254] process: using mwait in idle threads [ 0.104257] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.104258] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.104261] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.104263] Spectre V2 : Mitigation: Full generic retpoline [ 0.104264] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.104265] Speculative Store Bypass: Vulnerable [ 0.104268] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.104464] Freeing SMP alternatives memory: 40K [ 0.217450] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x7) [ 0.217647] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.217655] ... version: 2 [ 0.217656] ... bit width: 40 [ 0.217656] ... generic registers: 2 [ 0.217657] ... value mask: 000000ffffffffff [ 0.217658] ... max period: 000000007fffffff [ 0.217659] ... fixed-purpose events: 3 [ 0.217659] ... event mask: 0000000700000003 [ 0.217712] rcu: Hierarchical SRCU implementation. [ 0.218772] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.218852] smp: Bringing up secondary CPUs ... [ 0.219004] x86: Booting SMP configuration: [ 0.219005] .... node #0, CPUs: #1 #2 #3 [ 0.243840] smp: Brought up 1 node, 4 CPUs [ 0.243840] smpboot: Max logical packages: 1 [ 0.243840] smpboot: Total of 4 processors activated (21333.60 BogoMIPS) [ 0.248073] devtmpfs: initialized [ 0.248073] x86/mm: Memory block size: 128MB [ 0.248220] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes) [ 0.248220] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.248220] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.248220] pinctrl core: initialized pinctrl subsystem [ 0.248220] PM: RTC time: 05:48:06, date: 2021-03-12 [ 0.248220] thermal_sys: Registered thermal governor 'fair_share' [ 0.248220] thermal_sys: Registered thermal governor 'bang_bang' [ 0.248220] thermal_sys: Registered thermal governor 'step_wise' [ 0.248220] thermal_sys: Registered thermal governor 'user_space' [ 0.248220] thermal_sys: Registered thermal governor 'power_allocator' [ 0.248220] NET: Registered protocol family 16 [ 0.248288] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.248330] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.248370] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.248388] EISA bus registered [ 0.251779] cpuidle: using governor ladder [ 0.251785] cpuidle: using governor menu [ 0.251807] ACPI: bus type PCI registered [ 0.251809] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.251900] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.251903] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.251912] PCI: Using configuration type 1 for base access [ 0.254183] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.255917] ACPI: Added _OSI(Module Device) [ 0.255918] ACPI: Added _OSI(Processor Device) [ 0.255919] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.255920] ACPI: Added _OSI(Processor Aggregator Device) [ 0.255925] ACPI: Added _OSI(Linux-Dell-Video) [ 0.255926] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.255927] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.259767] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.263772] ACPI: Dynamic OEM Table Load: [ 0.263772] ACPI: SSDT 0xFFFF8E0DBCC38A80 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.263772] ACPI: Dynamic OEM Table Load: [ 0.263772] ACPI: SSDT 0xFFFF8E0DBCC38000 000087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.263772] ACPI: Dynamic OEM Table Load: [ 0.263772] ACPI: SSDT 0xFFFF8E0DBCC38E40 000087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.263772] ACPI: Interpreter enabled [ 0.263772] ACPI: (supports S0 S3 S4 S5) [ 0.263772] ACPI: Using IOAPIC for interrupt routing [ 0.263772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.263772] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.270573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.270580] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.270892] PCI host bridge to bus 0000:00 [ 0.270895] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.270897] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.270898] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.270900] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.270901] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff window] [ 0.270903] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.270913] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.271031] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.271073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.271186] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.271224] pci 0000:00:1a.0: reg 0x20: [io 0xe100-0xe11f] [ 0.271365] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.271403] pci 0000:00:1a.1: reg 0x20: [io 0xe200-0xe21f] [ 0.271541] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.271579] pci 0000:00:1a.2: reg 0x20: [io 0xe000-0xe01f] [ 0.271726] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.271744] pci 0000:00:1a.7: reg 0x10: [mem 0xf9205000-0xf92053ff] [ 0.271941] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.271959] pci 0000:00:1b.0: reg 0x10: [mem 0xf9200000-0xf9203fff 64bit] [ 0.272024] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.272140] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.272213] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.272347] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.272420] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.272544] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.272616] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.272740] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.272778] pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f] [ 0.272930] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.272968] pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f] [ 0.273106] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.273144] pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f] [ 0.273297] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.273314] pci 0000:00:1d.7: reg 0x10: [mem 0xf9204000-0xf92043ff] [ 0.273484] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.273641] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.273715] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.273719] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.273722] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.273724] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.273859] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018a [ 0.273873] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.273879] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.273885] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.273891] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.273898] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] [ 0.273904] pci 0000:00:1f.2: reg 0x24: [io 0xfc00-0xfc0f] [ 0.273912] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.273914] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.273915] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.273916] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.274041] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.274057] pci 0000:00:1f.3: reg 0x10: [mem 0xf9206000-0xf92060ff 64bit] [ 0.274074] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.274193] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.274208] pci 0000:00:1f.5: reg 0x10: [io 0xe700-0xe707] [ 0.274214] pci 0000:00:1f.5: reg 0x14: [io 0xe800-0xe803] [ 0.274220] pci 0000:00:1f.5: reg 0x18: [io 0xe900-0xe907] [ 0.274226] pci 0000:00:1f.5: reg 0x1c: [io 0xea00-0xea03] [ 0.274232] pci 0000:00:1f.5: reg 0x20: [io 0xeb00-0xeb0f] [ 0.274238] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f] [ 0.274398] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000 [ 0.274414] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff] [ 0.274424] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.274434] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref] [ 0.274440] pci 0000:01:00.0: reg 0x24: [io 0xb000-0xb07f] [ 0.274447] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.274509] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.0 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link) [ 0.274551] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.274566] pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff] [ 0.274705] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.274708] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.274710] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.274713] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.274749] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.274752] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.274839] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185 [ 0.274929] pci 0000:03:00.0: reg 0x24: [mem 0xf9000000-0xf9001fff] [ 0.274997] pci 0000:03:00.0: PME# supported from D3hot [ 0.275098] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.275122] pci 0000:03:00.1: reg 0x10: [io 0xc000-0xc007] [ 0.275131] pci 0000:03:00.1: reg 0x14: [io 0xc100-0xc103] [ 0.275140] pci 0000:03:00.1: reg 0x18: [io 0xc200-0xc207] [ 0.275149] pci 0000:03:00.1: reg 0x1c: [io 0xc300-0xc303] [ 0.275158] pci 0000:03:00.1: reg 0x20: [io 0xc400-0xc40f] [ 0.275286] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.275296] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.275299] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.275302] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff] [ 0.275358] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.275388] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.275416] pci 0000:04:00.0: reg 0x18: [mem 0xf8000000-0xf8000fff 64bit] [ 0.275448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.275457] pci 0000:04:00.0: enabling Extended Tags [ 0.275547] pci 0000:04:00.0: supports D1 D2 [ 0.275548] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.275647] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.275656] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.275659] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.275662] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.275679] pci_bus 0000:05: extended config space not accessible [ 0.275706] pci 0000:05:00.0: [168c:001a] type 00 class 0x020000 [ 0.275721] pci 0000:05:00.0: reg 0x10: [mem 0xf9100000-0xf910ffff] [ 0.275863] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.275867] pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff] [ 0.275871] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.275873] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.275874] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.275876] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.275877] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff window] (subtractive decode) [ 0.276730] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.276823] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.276915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.277008] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.277100] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.277191] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.277283] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.277375] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.279818] iommu: Default domain type: Translated [ 0.280000] SCSI subsystem initialized [ 0.280015] libata version 3.00 loaded. [ 0.280015] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.280015] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.280015] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.280015] vgaarb: loaded [ 0.280015] ACPI: bus type USB registered [ 0.280015] usbcore: registered new interface driver usbfs [ 0.280015] usbcore: registered new interface driver hub [ 0.280020] usbcore: registered new device driver usb [ 0.280020] pps_core: LinuxPPS API ver. 1 registered [ 0.280020] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.280020] PTP clock support registered [ 0.280020] EDAC MC: Ver: 3.0.0 [ 0.280020] NetLabel: Initializing [ 0.280020] NetLabel: domain hash size = 128 [ 0.280020] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.280020] NetLabel: unlabeled traffic allowed by default [ 0.280020] PCI: Using ACPI for IRQ routing [ 0.280954] PCI: pci_cache_line_size set to 64 bytes [ 0.281015] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.281016] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff] [ 0.281024] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.281024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.281024] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.284801] clocksource: Switched to clocksource tsc-early [ 0.305249] VFS: Disk quotas dquot_6.6.0 [ 0.305271] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.305432] AppArmor: AppArmor Filesystem Enabled [ 0.305475] pnp: PnP ACPI init [ 0.305770] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.305772] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.305774] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.305775] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.305777] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.305785] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305899] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.306091] pnp 00:02: [dma 2] [ 0.306124] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.306420] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.306739] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.306895] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.306980] system 00:06: [io 0x0400-0x04bf] could not be reserved [ 0.306986] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.307292] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.307297] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.307590] system 00:08: [mem 0x000cea00-0x000cffff] has been reserved [ 0.307593] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.307594] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.307596] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.307598] system 00:08: [mem 0x7fee0000-0x7fefffff] could not be reserved [ 0.307599] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.307601] system 00:08: [mem 0x00100000-0x7fedffff] could not be reserved [ 0.307603] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.307605] system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.307607] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.307608] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.307610] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.307612] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.307613] system 00:08: [mem 0x000e0000-0x000effff] has been reserved [ 0.307619] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.307625] pnp: PnP ACPI: found 9 devices [ 0.313996] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.314072] NET: Registered protocol family 2 [ 0.314436] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.314473] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.314556] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.314589] TCP: Hash tables configured (established 16384 bind 16384) [ 0.314706] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.314720] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.314767] NET: Registered protocol family 1 [ 0.314774] NET: Registered protocol family 44 [ 0.314784] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.314786] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.314789] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.314791] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.314801] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7ff00000-0x800fffff] [ 0.314805] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref] [ 0.314808] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref] [ 0.314811] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80500000-0x806fffff 64bit pref] [ 0.314814] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref] [ 0.314816] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.314818] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.314821] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.314823] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.314826] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.314829] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.314832] pci 0000:00:1c.0: bridge window [mem 0x7ff00000-0x800fffff] [ 0.314835] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff 64bit pref] [ 0.314839] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.314841] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.314845] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff] [ 0.314848] pci 0000:00:1c.3: bridge window [mem 0x80300000-0x804fffff 64bit pref] [ 0.314853] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.314854] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.314856] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.314860] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.314862] pci 0000:00:1c.4: bridge window [mem 0x80500000-0x806fffff 64bit pref] [ 0.314867] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.314871] pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff] [ 0.314877] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.314878] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.314880] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.314881] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.314883] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff window] [ 0.314884] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.314886] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff] [ 0.314887] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.314888] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.314890] pci_bus 0000:02: resource 1 [mem 0x7ff00000-0x800fffff] [ 0.314891] pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref] [ 0.314892] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.314894] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.314895] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref] [ 0.314896] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.314898] pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf8ffffff] [ 0.314899] pci_bus 0000:04: resource 2 [mem 0x80500000-0x806fffff 64bit pref] [ 0.314901] pci_bus 0000:05: resource 1 [mem 0xf9100000-0xf91fffff] [ 0.314902] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.314904] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.314905] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.314906] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.314908] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff window] [ 0.316122] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.316136] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.316142] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.316146] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.316155] PCI: CLS 32 bytes, default 64 [ 0.316244] Trying to unpack rootfs image as initramfs... [ 0.591584] Freeing initrd memory: 50840K [ 0.591901] check: Scanning for low memory corruption every 60 seconds [ 0.592369] Initialise system trusted keyrings [ 0.592380] Key type blacklist registered [ 0.592437] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 0.594282] zbud: loaded [ 0.594618] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.594875] fuse: init (API version 7.31) [ 0.595050] integrity: Platform Keyring initialized [ 0.605440] Key type asymmetric registered [ 0.605441] Asymmetric key parser 'x509' registered [ 0.605453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.605520] io scheduler mq-deadline registered [ 0.606533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.606616] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.606617] vesafb: scrolling: redraw [ 0.606618] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.606640] vesafb: framebuffer at 0xe9000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 0.606702] fbcon: Deferring console take-over [ 0.606703] fb0: VESA VGA frame buffer device [ 0.606718] intel_idle: MWAIT substates: 0x20 [ 0.606726] intel_idle: ACPI _CST not found or not usable [ 0.606865] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.606896] ACPI: Power Button [PWRB] [ 0.606948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.606986] ACPI: Power Button [PWRF] [ 0.607694] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.628112] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.630505] Linux agpgart interface v0.103 [ 0.633418] loop: module loaded [ 0.633643] ata_piix 0000:00:1f.2: version 2.13 [ 0.633732] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.634873] scsi host0: ata_piix [ 0.635067] scsi host1: ata_piix [ 0.635112] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.635115] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.635223] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.636028] scsi host2: ata_piix [ 0.636180] scsi host3: ata_piix [ 0.636222] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.636224] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.636427] libphy: Fixed MDIO Bus: probed [ 0.636428] tun: Universal TUN/TAP device driver, 1.6 [ 0.636470] PPP generic driver version 2.4.2 [ 0.636543] VFIO - User Level meta-driver version: 0.3 [ 0.636642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.636646] ehci-pci: EHCI PCI platform driver [ 0.636759] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.636766] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.640676] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.640688] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9205000 [ 0.653888] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.653945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.653947] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.653949] usb usb1: Product: EHCI Host Controller [ 0.653951] usb usb1: Manufacturer: Linux 5.8.0-44-generic ehci_hcd [ 0.653953] usb usb1: SerialNumber: ... [ 0.654071] hub 1-0:1.0: USB hub found [ 0.654078] hub 1-0:1.0: 6 ports detected [ 0.654349] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.654356] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.658254] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.658264] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9204000 [ 0.673890] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.673948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.673950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.673952] usb usb2: Product: EHCI Host Controller [ 0.673954] usb usb2: Manufacturer: Linux 5.8.0-44-generic ehci_hcd [ 0.673956] usb usb2: SerialNumber: ... [ 0.674080] hub 2-0:1.0: USB hub found [ 0.674087] hub 2-0:1.0: 6 ports detected [ 0.674257] ehci-platform: EHCI generic platform driver [ 0.674266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.674269] ohci-pci: OHCI PCI platform driver [ 0.674280] ohci-platform: OHCI generic platform driver [ 0.674286] uhci_hcd: USB Universal Host Controller Interface driver [ 0.674377] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.674382] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.674387] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.674412] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 0.674461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.674463] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.674465] usb usb3: Product: UHCI Host Controller [ 0.674466] usb usb3: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.674467] usb usb3: SerialNumber: ... [ 0.674557] hub 3-0:1.0: USB hub found [ 0.674564] hub 3-0:1.0: 2 ports detected [ 0.674769] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.674774] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.674779] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.674800] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 0.674858] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.674860] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.674861] usb usb4: Product: UHCI Host Controller [ 0.674863] usb usb4: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.674864] usb usb4: SerialNumber: ... [ 0.674953] hub 4-0:1.0: USB hub found [ 0.674960] hub 4-0:1.0: 2 ports detected [ 0.675136] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.675141] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.675146] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.675161] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 0.675212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.675213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.675215] usb usb5: Product: UHCI Host Controller [ 0.675216] usb usb5: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.675217] usb usb5: SerialNumber: ... [ 0.675308] hub 5-0:1.0: USB hub found [ 0.675314] hub 5-0:1.0: 2 ports detected [ 0.675499] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.675506] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.675511] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.675527] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.675573] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.675574] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.675576] usb usb6: Product: UHCI Host Controller [ 0.675577] usb usb6: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.675578] usb usb6: SerialNumber: ... [ 0.675668] hub 6-0:1.0: USB hub found [ 0.675675] hub 6-0:1.0: 2 ports detected [ 0.675851] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.675856] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.675861] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.675876] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.675922] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.675924] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.675925] usb usb7: Product: UHCI Host Controller [ 0.675926] usb usb7: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.675928] usb usb7: SerialNumber: ... [ 0.676025] hub 7-0:1.0: USB hub found [ 0.676032] hub 7-0:1.0: 2 ports detected [ 0.676228] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.676233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.676238] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.676253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.676315] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 0.676317] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.676319] usb usb8: Product: UHCI Host Controller [ 0.676320] usb usb8: Manufacturer: Linux 5.8.0-44-generic uhci_hcd [ 0.676321] usb usb8: SerialNumber: ... [ 0.676410] hub 8-0:1.0: USB hub found [ 0.676417] hub 8-0:1.0: 2 ports detected [ 0.676567] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.676568] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.676704] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.676800] mousedev: PS/2 mouse device common for all mice [ 0.676931] rtc_cmos 00:01: RTC can wake from S4 [ 0.677113] rtc_cmos 00:01: registered as rtc0 [ 0.677141] rtc_cmos 00:01: setting system clock to 2021-03-12T05:48:06 UTC (1615528086) [ 0.677166] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.677174] i2c /dev entries driver [ 0.677237] device-mapper: uevent: version 1.0.3 [ 0.677300] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 0.677325] platform eisa.0: Probing EISA bus 0 [ 0.677327] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.677328] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.677330] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.677331] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.677332] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.677334] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.677335] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.677337] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.677338] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.677339] platform eisa.0: EISA: Detected 0 cards [ 0.677343] intel_pstate: CPU model not supported [ 0.677428] ledtrig-cpu: registered to indicate activity on CPUs [ 0.677529] drop_monitor: Initializing network drop monitor service [ 0.677738] NET: Registered protocol family 10 [ 0.685663] Segment Routing with IPv6 [ 0.685692] NET: Registered protocol family 17 [ 0.685763] Key type dns_resolver registered [ 0.686080] microcode: sig=0x10677, pf=0x10, revision=0x70a [ 0.686137] microcode: Microcode Update Driver: v2.2. [ 0.686142] IPI shorthand broadcast: enabled [ 0.686150] sched_clock: Marking stable (685958642, 173556)->(689998757, -3866559) [ 0.686246] registered taskstats version 1 [ 0.686271] Loading compiled-in X.509 certificates [ 0.687366] Loaded X.509 cert 'Build time autogenerated kernel key: a3e9eb9032099963d398e4d4d5991ce491952397' [ 0.687400] zswap: loaded using pool lzo/zbud [ 0.687584] Key type ._fscrypt registered [ 0.687585] Key type .fscrypt registered [ 0.687586] Key type fscrypt-provisioning registered [ 0.691612] Key type encrypted registered [ 0.691615] AppArmor: AppArmor sha1 policy hashing enabled [ 0.691622] ima: No TPM chip found, activating TPM-bypass! [ 0.691628] ima: Allocated hash algorithm: sha1 [ 0.691636] ima: No architecture policies found [ 0.691645] evm: Initialising EVM extended attributes: [ 0.691646] evm: security.selinux [ 0.691646] evm: security.SMACK64 [ 0.691647] evm: security.SMACK64EXEC [ 0.691648] evm: security.SMACK64TRANSMUTE [ 0.691648] evm: security.SMACK64MMAP [ 0.691649] evm: security.apparmor [ 0.691649] evm: security.ima [ 0.691650] evm: security.capability [ 0.691651] evm: HMAC attrs: 0x1 [ 0.692086] PM: Magic number: 13:198:820 [ 0.692150] ehci-pci 0000:00:1a.7: hash matches [ 0.694090] RAS: Correctable Errors collector initialized. [ 0.697623] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.963093] ata4: SATA link down (SStatus 0 SControl 300) [ 0.973699] ata3: SATA link down (SStatus 0 SControl 300) [ 1.143777] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 1.341205] usb 6-1: New USB device found, idVendor=046d, idProduct=c51b, bcdDevice=46.00 [ 1.341207] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.341209] usb 6-1: Product: USB Receiver [ 1.341211] usb 6-1: Manufacturer: Logitech [ 1.419825] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.419836] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.423828] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.423840] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.424387] ata1.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100 [ 1.424389] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.428388] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100 [ 1.428394] ata2.01: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 [ 1.432013] ata1.01: HPA detected: current 976771055, native 976773168 [ 1.432016] ata1.01: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 1.432018] ata1.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.432857] ata2.00: configured for UDMA/100 [ 1.436488] ata1.00: configured for UDMA/100 [ 1.437338] ata2.01: configured for UDMA/33 [ 1.441131] ata1.01: configured for UDMA/133 [ 1.441258] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5 [ 1.441474] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.441505] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.441507] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.441520] sd 0:0:0:0: [sda] Write Protect is off [ 1.441523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.441544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.441617] scsi 0:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5 [ 1.441861] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.442054] sd 0:0:1:0: [sdb] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 1.442077] sd 0:0:1:0: [sdb] Write Protect is off [ 1.442079] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.442115] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.442613] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 1.474004] sda: sda1 sda2 < sda5 > [ 1.483985] sdb: sdb1 sdb2 < sdb5 > [ 1.484148] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.484378] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.497860] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.497863] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.498086] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.498136] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.516993] scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 [ 1.573423] sr 1:0:1:0: [sr1] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 1.573640] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.573689] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.575957] Freeing unused decrypted memory: 2040K [ 1.576724] Freeing unused kernel image (initmem) memory: 2640K [ 1.576778] Write protecting the kernel read-only data: 22528k [ 1.577711] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.578099] Freeing unused kernel image (rodata/data gap) memory: 756K [ 1.615784] tsc: Refined TSC clocksource calibration: 2666.666 MHz [ 1.615790] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns [ 1.642959] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.642976] clocksource: Switched to clocksource tsc [ 1.646410] x86/mm: Checking user space page tables [ 1.695664] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.695676] Run /init as init process [ 1.695678] with arguments: [ 1.695678] /init [ 1.695679] splash [ 1.695680] with environment: [ 1.695681] HOME=/ [ 1.695681] TERM=linux [ 1.695682] BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic [ 1.779794] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.843698] Floppy drive(s): fd0 is 1.44M [ 1.858348] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 1.863539] FDC 0 is a post-1991 82077 [ 1.867967] scsi host4: pata_jmicron [ 1.868693] scsi host5: pata_jmicron [ 1.868741] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 1.868743] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 1.884175] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20200528/utaddress-204) [ 1.884182] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.884214] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.884378] ahci 0000:03:00.0: version 3.0 [ 1.884983] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.887121] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.889105] hid: raw HID events driver (C) Jiri Kosina [ 1.890053] libphy: r8169: probed [ 1.890529] r8169 0000:04:00.0 eth0: RTL8168b/8111b, XX:XX:XX:XX:XX:XX, XID 380, IRQ 16 [ 1.890531] r8169 0000:04:00.0 eth0: jumbo features [frames: 4074 bytes, tx checksumming: ko] [ 1.894784] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.894787] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.895321] scsi host6: ahci [ 1.896630] scsi host7: ahci [ 1.896722] ata7: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 19 [ 1.896724] ata8: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 19 [ 1.916392] usbcore: registered new interface driver usbhid [ 1.916393] usbhid: USB HID core driver [ 1.936172] usb 2-2: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 [ 1.936174] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.936453] hub 2-2:1.0: USB hub found [ 1.936542] hub 2-2:1.0: 4 ports detected [ 1.944440] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 1.944956] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511 [ 1.947147] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:046D:C51B.0001/input/input3 [ 1.947303] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 1.947535] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 2.016168] logitech-djreceiver 0003:046D:C51B.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 2.030671] ata5.01: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 [ 2.030673] ata5.01: 156301488 sectors, multi 16: LBA [ 2.033732] scsi 4:0:1:0: Direct-Access ATA WDC WD800JB-00JJ 1C05 PQ: 0 ANSI: 5 [ 2.033948] sd 4:0:1:0: Attached scsi generic sg4 type 0 [ 2.033978] sd 4:0:1:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.033991] sd 4:0:1:0: [sdc] Write Protect is off [ 2.033992] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.034013] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.062293] sdc: sdc1 [ 2.062597] sd 4:0:1:0: [sdc] Attached SCSI disk [ 2.076363] logitech-djreceiver 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 2.158197] logitech-djreceiver 0003:046D:C51B.0002: device of type 27 Mhz (0x02) connected on slot 1 [ 2.160211] input: Logitech Wireless Mouse PID:0084 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C51B.0002/0003:046D:0084.0003/input/input4 [ 2.161368] hid-generic 0003:046D:0084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:0084] on usb-0000:00:1d.0-1/input1:1 [ 2.173499] random: fast init done [ 2.206212] logitech-hidpp-device 0003:046D:0084.0003: HID++ 1.0 device connected. [ 2.212218] ata8: SATA link down (SStatus 0 SControl 300) [ 2.212252] ata7: SATA link down (SStatus 0 SControl 300) [ 2.270300] input: Logitech Wireless Mouse PID:0084 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C51B.0002/0003:046D:0084.0003/input/input8 [ 2.270440] logitech-hidpp-device 0003:046D:0084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:0084] on usb-0000:00:1d.0-1/input1:1 [ 2.417028] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 2.616815] usb 8-2: New USB device found, idVendor=046d, idProduct=c505, bcdDevice=17.21 [ 2.616818] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.616820] usb 8-2: Product: USB Receiver [ 2.616821] usb 8-2: Manufacturer: Logitech [ 2.634382] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C505.0004/input/input9 [ 2.691884] hid-generic 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0 [ 2.722874] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C505.0005/input/input10 [ 2.723034] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C505.0005/input/input11 [ 2.779780] usb 2-2.1: new high-speed USB device number 5 using ehci-pci [ 2.779859] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C505.0005/input/input12 [ 2.779956] hid-generic 0003:046D:C505.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1 [ 2.889042] usb 2-2.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 2.889045] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.889046] usb 2-2.1: Product: SanDisk 3.2Gen1 [ 2.889048] usb 2-2.1: Manufacturer: USB [ 2.889050] usb 2-2.1: SerialNumber: ... [ 2.967775] usb 2-2.2: new high-speed USB device number 6 using ehci-pci [ 3.080917] usb 2-2.2: New USB device found, idVendor=13fe, idProduct=4100, bcdDevice= 1.00 [ 3.080920] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.080922] usb 2-2.2: Product: USB DISK 2.0 [ 3.080924] usb 2-2.2: Manufacturer: [ 3.080925] usb 2-2.2: SerialNumber: ... [ 3.159780] usb 2-2.4: new high-speed USB device number 7 using ehci-pci [ 3.275792] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 3.275794] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.275796] usb 2-2.4: Product: Intenso Rainbow Line [ 3.275798] usb 2-2.4: Manufacturer: Alcor [ 3.275800] usb 2-2.4: SerialNumber: ... [ 3.284863] usb-storage 2-2.1:1.0: USB Mass Storage device detected [ 3.285060] scsi host8: usb-storage 2-2.1:1.0 [ 3.285184] usb-storage 2-2.2:1.0: USB Mass Storage device detected [ 3.285307] scsi host9: usb-storage 2-2.2:1.0 [ 3.285404] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 3.285518] scsi host10: usb-storage 2-2.4:1.0 [ 3.285615] usbcore: registered new interface driver usb-storage [ 3.287621] usbcore: registered new interface driver uas [ 3.397625] fbcon: Taking over console [ 3.397707] Console: switching to colour frame buffer device 80x30 [ 3.474827] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.304572] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 4.305808] scsi 9:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 4.305821] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 4.306083] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 4.306258] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 4.306464] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 4.306806] sd 8:0:0:0: [sde] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 4.307178] sd 9:0:0:0: [sdd] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB) [ 4.307680] sd 10:0:0:0: [sdf] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 4.307803] sd 9:0:0:0: [sdd] Write Protect is off [ 4.307806] sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 4.308426] sd 9:0:0:0: [sdd] No Caching mode page found [ 4.308430] sd 9:0:0:0: [sdd] Assuming drive cache: write through [ 4.308675] sd 8:0:0:0: [sde] Write Protect is off [ 4.308678] sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 4.308928] sd 10:0:0:0: [sdf] Write Protect is off [ 4.308931] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 4.309678] sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.309926] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.332952] random: crng init done [ 4.332953] sdd: sdd1 [ 4.333073] sdf: sdf1 [ 4.334317] sde: sde1 [ 4.335929] sd 9:0:0:0: [sdd] Attached SCSI removable disk [ 4.336804] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 4.337548] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 5.417712] systemd[1]: Inserted module 'autofs4' [ 5.594005] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.611851] systemd[1]: Detected architecture x86-64. [ 5.630199] systemd[1]: Set hostname to ... [ 8.285684] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 9.359058] systemd[1]: Created slice system-modprobe.slice. [ 9.359366] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 9.359660] systemd[1]: Created slice User and Session Slice. [ 9.359733] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.359956] systemd[1]: Set up automount ... [ 9.360005] systemd[1]: Reached target User and Group Name Lookups. [ 9.360024] systemd[1]: Reached target Remote File Systems. [ 9.360039] systemd[1]: Reached target Slices. [ 9.360177] systemd[1]: Listening on Syslog Socket. [ 9.360288] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.360353] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.360587] systemd[1]: Listening on Journal Audit Socket. [ 9.360697] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.360829] systemd[1]: Listening on Journal Socket. [ 9.360957] systemd[1]: Listening on udev Control Socket. [ 9.361047] systemd[1]: Listening on udev Kernel Socket. [ 9.362315] systemd[1]: Mounting Huge Pages File System... [ 9.363529] systemd[1]: Mounting POSIX Message Queue File System... [ 9.364963] systemd[1]: Mounting Kernel Debug File System... [ 9.366231] systemd[1]: Mounting Kernel Trace File System... [ 9.368170] systemd[1]: Starting Journal Service... [ 9.369509] systemd[1]: Starting Set the console keyboard layout... [ 9.371228] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.372777] systemd[1]: Starting Load Kernel Module drm... [ 9.446024] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 9.446091] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.590699] systemd[1]: Starting Load Kernel Modules... [ 9.591976] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.593133] systemd[1]: Starting udev Coldplug all Devices... [ 9.594342] systemd[1]: Starting Uncomplicated firewall... [ 9.596656] systemd[1]: Mounted Huge Pages File System. [ 9.596821] systemd[1]: Mounted POSIX Message Queue File System. [ 9.596976] systemd[1]: Mounted Kernel Debug File System. [ 9.597128] systemd[1]: Mounted Kernel Trace File System. [ 9.597742] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.716004] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 9.718062] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.719304] systemd[1]: Activating swap /swapfile... [ 9.966874] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.966948] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.968361] systemd[1]: Starting Load/Save Random Seed... [ 9.969703] systemd[1]: Starting Create System Users... [ 9.970220] systemd[1]: XXX@XXX: Succeeded. [ 9.970669] systemd[1]: Finished Load Kernel Module drm. [ 9.971413] systemd[1]: Finished Uncomplicated firewall. [ 10.033006] systemd[1]: Finished Set the console keyboard layout. [ 10.054243] systemd[1]: Started Journal Service. [ 10.120557] systemd-journald[279]: Received client request to flush runtime journal. [ 10.299782] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 10.383350] lp: driver loaded but no devices found [ 10.482709] ppdev: user-space parallel port driver [ 10.661288] parport_pc 00:04: reported by Plug and Play ACPI [ 10.661367] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.763952] lp0: using parport0 (interrupt-driven). [ 20.254032] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 20.254505] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.795113] snd_hda_intel 0000:01:00.1: Disabling MSI [ 20.795126] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 20.798300] ath5k 0000:05:00.0: registered as 'phy0' [ 20.880946] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 20.881040] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 20.881117] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 20.881195] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 20.881272] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 21.035204] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 21.035210] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.035212] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 21.035214] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 21.035215] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 21.035216] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 21.035219] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 21.035221] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 21.035222] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 21.035223] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 21.035225] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 21.056705] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 21.056805] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 21.056887] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 21.056957] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 21.057044] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 21.057122] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 21.057192] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 [ 21.057353] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0 [ 21.427422] ath: EEPROM regdomain: 0x60 [ 21.427424] ath: EEPROM indicates we should expect a direct regpair map [ 21.427426] ath: Country alpha2 being used: 00 [ 21.427426] ath: Regpair used: 0x60 [ 21.427457] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 21.427881] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 21.605881] intel_powerclamp: No package C-state available [ 21.639962] intel_powerclamp: No package C-state available [ 21.676029] intel_powerclamp: No package C-state available [ 21.704505] nvidia: loading out-of-tree module taints kernel. [ 21.704517] nvidia: module license 'NVIDIA' taints kernel. [ 21.704518] Disabling lock debugging due to kernel taint [ 21.708506] intel_powerclamp: No package C-state available [ 21.745031] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 21.796109] nvidia-nvlink: Nvlink Core is being initialized, major device number 237 [ 21.797044] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 21.898586] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.102.04 Tue Dec 29 06:51:23 UTC 2020 [ 22.096714] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.102.04 Tue Dec 29 06:44:25 UTC 2020 [ 22.174540] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 22.174543] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 26.434704] ath5k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 26.673603] nvidia-uvm: Loaded the UVM driver, major device number 235. [ 69.244256] RTL8211B Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 69.307637] r8169 0000:04:00.0 enp4s0: Link is Down [ 71.681715] wlp5s0: authenticate with XX:XX:XX:XX:XX:XX [ 71.686088] wlp5s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 71.702298] wlp5s0: authenticated [ 71.703784] wlp5s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 71.712041] wlp5s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=1) [ 71.712136] wlp5s0: associated [ 71.712261] ath: EEPROM regdomain: 0x8114 [ 71.712261] ath: EEPROM indicates we should expect a country code [ 71.712262] ath: doing EEPROM country->regdmn map search [ 71.712263] ath: country maps to regdmn code: 0x37 [ 71.712264] ath: Country alpha2 being used: DE [ 71.712265] ath: Regpair used: 0x37 [ 71.712266] ath: regdomain 0x8114 dynamically updated by country element [ 71.972911] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 71.973144] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 91.351284] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 91.351706] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs [ 110.190147] rfkill: input handler disabled [ 150.339672] rfkill: input handler enabled [ 159.320884] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 159.722333] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 159.726843] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 159.824845] rfkill: input handler disabled [ 160.123185] ISO 9660 Extensions: RRIP_1991A [ 241.043613] usb 2-2.4: USB disconnect, device number 7 [ 241.285190] usb 2-2.4: new high-speed USB device number 8 using ehci-pci [ 241.401228] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 241.401230] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 241.401233] usb 2-2.4: Product: Intenso Rainbow Line [ 241.401234] usb 2-2.4: Manufacturer: Alcor [ 241.401236] usb 2-2.4: SerialNumber: ... [ 241.401519] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 241.401730] scsi host11: usb-storage 2-2.4:1.0 [ 242.406872] scsi 11:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 242.407145] sd 11:0:0:0: Attached scsi generic sg7 type 0 [ 242.408375] sd 11:0:0:0: [sdg] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 242.409371] sd 11:0:0:0: [sdg] Write Protect is off [ 242.409374] sd 11:0:0:0: [sdg] Mode Sense: 23 00 00 00 [ 242.410359] sd 11:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 242.442370] sdg: sdg1 [ 242.445488] sd 11:0:0:0: [sdg] Attached SCSI removable disk [ 373.651639] usb 2-2.4: USB disconnect, device number 8 [ 373.924531] usb 2-2.4: new high-speed USB device number 9 using ehci-pci [ 374.044530] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 374.044534] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 374.044536] usb 2-2.4: Product: Intenso Rainbow Line [ 374.044538] usb 2-2.4: Manufacturer: Alcor [ 374.044540] usb 2-2.4: SerialNumber: ... [ 374.044794] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 374.044982] scsi host10: usb-storage 2-2.4:1.0 [ 375.070288] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 375.070590] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 375.071772] sd 10:0:0:0: [sdf] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 375.072770] sd 10:0:0:0: [sdf] Write Protect is off [ 375.072773] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 375.073767] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 375.097648] sdf: sdf1 [ 375.100770] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 532.166054] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.252 msecs [ 532.166057] perf: interrupt took too long (11583 > 2500), lowering kernel.perf_event_max_sample_rate to 17250 [ 1046.163804] usb 2-2.4: USB disconnect, device number 9 [ 1046.468082] usb 2-2.4: new high-speed USB device number 10 using ehci-pci [ 1046.584065] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 1046.584068] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1046.584070] usb 2-2.4: Product: Intenso Rainbow Line [ 1046.584072] usb 2-2.4: Manufacturer: Alcor [ 1046.584074] usb 2-2.4: SerialNumber: ... [ 1046.584345] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 1046.584549] scsi host10: usb-storage 2-2.4:1.0 [ 1047.593960] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 1047.594378] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 1047.595584] sd 10:0:0:0: [sdf] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1047.596561] sd 10:0:0:0: [sdf] Write Protect is off [ 1047.596564] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 1047.597563] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1047.617454] sdf: sdf1 [ 1047.620562] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 1729.683978] usb 2-2.4: USB disconnect, device number 10 [ 1729.936627] usb 2-2.4: new high-speed USB device number 11 using ehci-pci [ 1730.440619] usb 2-2.4: device not accepting address 11, error -71 [ 1730.728606] usb 2-2.4: new full-speed USB device number 12 using ehci-pci [ 1730.860102] usb 2-2.4: not running at top speed; connect to a high speed hub [ 1730.866993] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 1730.866996] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1730.866998] usb 2-2.4: Product: Intenso Rainbow Line [ 1730.867000] usb 2-2.4: Manufacturer: Alcor [ 1730.867002] usb 2-2.4: SerialNumber: ... [ 1730.867391] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 1730.867651] scsi host10: usb-storage 2-2.4:1.0 [ 1731.882626] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 1731.882918] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 1731.884360] sd 10:0:0:0: [sdf] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1731.885480] sd 10:0:0:0: [sdf] Write Protect is off [ 1731.885483] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 1731.886604] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1731.909749] sdf: sdf1 [ 1731.913233] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 1756.051985] usb 2-2.1: USB disconnect, device number 5 [ 1761.904578] usb 2-2.1: new high-speed USB device number 13 using ehci-pci [ 1762.013734] usb 2-2.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 1762.013738] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1762.013740] usb 2-2.1: Product: SanDisk 3.2Gen1 [ 1762.013742] usb 2-2.1: Manufacturer: USB [ 1762.013744] usb 2-2.1: SerialNumber: ... [ 1762.014155] usb-storage 2-2.1:1.0: USB Mass Storage device detected [ 1762.014303] scsi host8: usb-storage 2-2.1:1.0 [ 1763.017506] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 1763.017821] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 1763.018497] sd 8:0:0:0: [sde] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 1763.019862] sd 8:0:0:0: [sde] Write Protect is off [ 1763.019865] sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 1763.021238] sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1763.055251] sde: sde1 [ 1763.058615] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 1763.516248] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1767.315988] usb 2-2.4: USB disconnect, device number 12 [ 1770.899989] usb 2-2.1: USB disconnect, device number 13 [ 1771.332537] usb 2-2.1: new high-speed USB device number 14 using ehci-pci [ 1771.441614] usb 2-2.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 1771.441617] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1771.441619] usb 2-2.1: Product: SanDisk 3.2Gen1 [ 1771.441621] usb 2-2.1: Manufacturer: USB [ 1771.441623] usb 2-2.1: SerialNumber: ... [ 1771.442060] usb-storage 2-2.1:1.0: USB Mass Storage device detected [ 1771.442295] scsi host8: usb-storage 2-2.1:1.0 [ 1772.457389] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 1772.457741] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 1772.458373] sd 8:0:0:0: [sde] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 1772.459742] sd 8:0:0:0: [sde] Write Protect is off [ 1772.459744] sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 1772.460755] sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1772.492259] sde: sde1 [ 1772.498489] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 1772.660528] usb 2-2.4: new high-speed USB device number 15 using ehci-pci [ 1772.781036] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 1772.781039] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1772.781041] usb 2-2.4: Product: Intenso Rainbow Line [ 1772.781043] usb 2-2.4: Manufacturer: Alcor [ 1772.781044] usb 2-2.4: SerialNumber: ... [ 1772.784406] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 1772.786548] scsi host10: usb-storage 2-2.4:1.0 [ 1772.956646] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1773.802387] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 1773.802756] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 1773.804494] sd 10:0:0:0: [sdf] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1773.805493] sd 10:0:0:0: [sdf] Write Protect is off [ 1773.805496] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 1773.806497] sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1774.124870] usb 2-2.4: USB disconnect, device number 15 [ 1774.140772] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 1774.488522] usb 2-2.4: new full-speed USB device number 16 using ehci-pci [ 1774.603984] usb 2-2.4: not running at top speed; connect to a high speed hub [ 1774.610112] usb 2-2.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 1774.610114] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1774.610116] usb 2-2.4: Product: Intenso Rainbow Line [ 1774.610118] usb 2-2.4: Manufacturer: Alcor [ 1774.610120] usb 2-2.4: SerialNumber: ... [ 1774.610405] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 1774.610588] scsi host10: usb-storage 2-2.4:1.0 [ 1774.610984] usb 2-2.2: USB disconnect, device number 6 [ 1775.626389] scsi 10:0:0:0: Direct-Access Intenso Rainbow Line 8.07 PQ: 0 ANSI: 4 [ 1775.626691] sd 10:0:0:0: Attached scsi generic sg5 type 0 [ 1775.628997] sd 10:0:0:0: [sdd] 31205376 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1775.630121] sd 10:0:0:0: [sdd] Write Protect is off [ 1775.630124] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 1775.631254] sd 10:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1775.656378] sdd: sdd1 [ 1775.660120] sd 10:0:0:0: [sdd] Attached SCSI removable disk [ 2103.411273] usb 2-2.2: new high-speed USB device number 17 using ehci-pci [ 2103.524817] usb 2-2.2: New USB device found, idVendor=13fe, idProduct=4100, bcdDevice= 1.00 [ 2103.524820] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2103.524822] usb 2-2.2: Product: USB DISK 2.0 [ 2103.524824] usb 2-2.2: Manufacturer: [ 2103.524826] usb 2-2.2: SerialNumber: ... [ 2103.525115] usb-storage 2-2.2:1.0: USB Mass Storage device detected [ 2103.525323] scsi host9: usb-storage 2-2.2:1.0 [ 2104.584723] scsi 9:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 2104.586315] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 2106.096706] sd 9:0:0:0: [sdf] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB) [ 2106.097323] sd 9:0:0:0: [sdf] Write Protect is off [ 2106.097326] sd 9:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 2106.097948] sd 9:0:0:0: [sdf] No Caching mode page found [ 2106.097952] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 2106.120830] sdf: sdf1 [ 2106.123946] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 2106.764825] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2106.767204] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2106.768580] ISO 9660 Extensions: RRIP_1991A [ 2131.604078] usb 2-2.2: USB disconnect, device number 17 [ 2168.946953] usb 2-2.3: new full-speed USB device number 18 using ehci-pci [ 2169.056958] usb 2-2.3: New USB device found, idVendor=04f9, idProduct=0223, bcdDevice= 1.00 [ 2169.056961] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2169.056963] usb 2-2.3: Product: DCP-365CN [ 2169.056965] usb 2-2.3: Manufacturer: Brother [ 2169.056967] usb 2-2.3: SerialNumber: ... [ 2169.057394] usb-storage 2-2.3:1.2: USB Mass Storage device detected [ 2169.057572] scsi host9: usb-storage 2-2.3:1.2 [ 2169.238647] usblp 2-2.3:1.0: usblp1: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0223 [ 2169.238693] usbcore: registered new interface driver usblp [ 2170.099493] scsi 9:0:0:0: Direct-Access Brother DCP-365CN 1.00 PQ: 0 ANSI: 2 [ 2170.099828] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 2170.179599] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 2172.882942] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 2173.039868] usb 1-3: New USB device found, idVendor=152d, idProduct=2339, bcdDevice= 1.00 [ 2173.039871] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2173.039873] usb 1-3: Product: USB to ATA/ATAPI Bridge [ 2173.039875] usb 1-3: Manufacturer: JMicron [ 2173.039876] usb 1-3: SerialNumber: ... [ 2173.040404] usb-storage 1-3:1.0: USB Mass Storage device detected [ 2173.040584] scsi host11: usb-storage 1-3:1.0 [ 2174.055644] scsi 11:0:0:0: Direct-Access Hitachi HDT721010SLA360 PQ: 0 ANSI: 2 CCS [ 2174.055985] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 2174.059144] sd 11:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2174.059756] sd 11:0:0:0: [sdg] Write Protect is off [ 2174.059760] sd 11:0:0:0: [sdg] Mode Sense: 00 38 00 00 [ 2174.060375] sd 11:0:0:0: [sdg] Asking for cache data failed [ 2174.060380] sd 11:0:0:0: [sdg] Assuming drive cache: write through [ 2174.103384] sdg: sdg1 sdg2 [ 2174.105501] sd 11:0:0:0: [sdg] Attached SCSI disk [ 2174.834509] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null) [ 2175.360317] usb 2-5: new high-speed USB device number 19 using ehci-pci [ 2175.519962] usb 2-5: New USB device found, idVendor=1058, idProduct=1021, bcdDevice=20.21 [ 2175.519964] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2175.519966] usb 2-5: Product: Ext HDD 1021 [ 2175.519967] usb 2-5: Manufacturer: Western Digital [ 2175.519969] usb 2-5: SerialNumber: ... [ 2175.520248] usb-storage 2-5:1.0: USB Mass Storage device detected [ 2175.523489] scsi host12: usb-storage 2-5:1.0 [ 2175.974608] usblp1: removed [ 2175.977203] usblp 2-2.3:1.0: usblp1: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0223 [ 2176.553237] scsi 12:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4 [ 2176.553551] scsi 12:0:0:0: Attached scsi generic sg9 type 0 [ 2176.554720] sd 12:0:0:0: [sdh] 3907024896 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2176.556802] sd 12:0:0:0: [sdh] Write Protect is off [ 2176.556806] sd 12:0:0:0: [sdh] Mode Sense: 17 00 10 08 [ 2176.558715] sd 12:0:0:0: [sdh] No Caching mode page found [ 2176.558719] sd 12:0:0:0: [sdh] Assuming drive cache: write through [ 2176.593733] sdh: sdh1 sdh2 sdh3 [ 2176.598599] sd 12:0:0:0: [sdh] Attached SCSI disk [ 2177.670223] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2177.672096] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2177.672841] ISO 9660 Extensions: RRIP_1991A [ 2177.720849] EXT4-fs (sdh3): mounted filesystem with ordered data mode. Opts: (null)