[ 0.000000] microcode: updated early: 0x1a -> 0x28, date = 2019-11-12 [ 0.000000] Linux version 6.4.11-zen2-1-zen (XXX@XXX) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 ZEN SMP PREEMPT_DYNAMIC Sat, 19 Aug 2023 15:38:10 +0000 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=HASH_FD6-C320-E37C-B81A-954728FB9043 rw rootflags=subvol=@ loglevel=3 nowatchdog nvme_load=YES [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000050000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c655bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c655c000-0x00000000c6562fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c6563000-0x00000000c69a7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c69a8000-0x00000000c6d5efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c6d5f000-0x00000000d96fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d96ff000-0x00000000d98f4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d98f5000-0x00000000d9914fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9915000-0x00000000d9a06fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d9a07000-0x00000000d9f7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9f80000-0x00000000d9ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.3.1 by American Megatrends [ 0.000000] efi: ACPI=0xd98fb000 ACPI 2.0=0xd98fb000 SMBIOS=0xd9f7e498 [ 0.000000] efi: Remove mem138: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem139: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem140: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map [ 0.000000] efi: Not removing mem141: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.000000] efi: Not removing mem142: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem143: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteDesk 800 G1 TWR/18E4, BIOS L01 v02.71 05/09/2017 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3592.001 MHz processor [ 0.000658] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000660] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000668] last_pfn = 0x81fe00 max_arch_pfn = 0x400000000 [ 0.000674] total RAM covered: 32702M [ 0.000790] Found optimal setting for mtrr clean up [ 0.000791] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G [ 0.000794] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001097] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved [ 0.001100] last_pfn = 0xda000 max_arch_pfn = 0x400000000 [ 0.004198] found SMP MP-table at [mem 0x000f4d40-0x000f4d4f] [ 0.004222] Using GB pages for direct mapping [ 0.004577] Secure boot disabled [ 0.004578] RAMDISK: [mem 0x35edb000-0x36f64fff] [ 0.004581] ACPI: Early table checksum verification disabled [ 0.004584] ACPI: RSDP 0x00000000D98FB000 000024 (v02 HPQOEM) [ 0.004587] ACPI: XSDT 0x00000000D98FB090 00009C (v01 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004592] ACPI: FACP 0x00000000D9909000 00010C (v05 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004596] ACPI: DSDT 0x00000000D98FB1B8 00DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112) [ 0.004598] ACPI: FACS 0x00000000D9A05080 000040 [ 0.004600] ACPI: APIC 0x00000000D9909110 000092 (v03 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004603] ACPI: FPDT 0x00000000D99091A8 000044 (v01 HPQOEM SLIC-BPC 20170509 AMI 00010013) [ 0.004605] ACPI: SSDT 0x00000000D99091F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.004607] ACPI: SSDT 0x00000000D9909730 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.004610] ACPI: SSDT 0x00000000D990A208 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ 0.004612] ACPI: MCFG 0x00000000D990A3D0 00003C (v01 HPQOEM SLIC-BPC 20170509 MSFT 00000097) [ 0.004614] ACPI: HPET 0x00000000D990A410 000038 (v01 HPQOEM SLIC-BPC 20170509 AMI. 00000005) [ 0.004617] ACPI: SSDT 0x00000000D990A448 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.004619] ACPI: SSDT 0x00000000D990A7B8 00348C (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.004621] ACPI: SSDT 0x00000000D990DC48 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.004624] ACPI: SLIC 0x00000000D99142D8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.004626] ACPI: ASF! 0x00000000D9914450 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.004629] ACPI: TCPA 0x00000000D99144F8 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.004631] ACPI: DMAR 0x00000000D9914530 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.004633] ACPI: Reserving FACP table memory at [mem 0xd9909000-0xd990910b] [ 0.004634] ACPI: Reserving DSDT table memory at [mem 0xd98fb1b8-0xd9908ffd] [ 0.004635] ACPI: Reserving FACS table memory at [mem 0xd9a05080-0xd9a050bf] [ 0.004636] ACPI: Reserving APIC table memory at [mem 0xd9909110-0xd99091a1] [ 0.004636] ACPI: Reserving FPDT table memory at [mem 0xd99091a8-0xd99091eb] [ 0.004637] ACPI: Reserving SSDT table memory at [mem 0xd99091f0-0xd9909728] [ 0.004638] ACPI: Reserving SSDT table memory at [mem 0xd9909730-0xd990a207] [ 0.004638] ACPI: Reserving SSDT table memory at [mem 0xd990a208-0xd990a3ce] [ 0.004639] ACPI: Reserving MCFG table memory at [mem 0xd990a3d0-0xd990a40b] [ 0.004640] ACPI: Reserving HPET table memory at [mem 0xd990a410-0xd990a447] [ 0.004640] ACPI: Reserving SSDT table memory at [mem 0xd990a448-0xd990a7b4] [ 0.004641] ACPI: Reserving SSDT table memory at [mem 0xd990a7b8-0xd990dc43] [ 0.004642] ACPI: Reserving SSDT table memory at [mem 0xd990dc48-0xd99142d6] [ 0.004642] ACPI: Reserving SLIC table memory at [mem 0xd99142d8-0xd991444d] [ 0.004643] ACPI: Reserving ASF! table memory at [mem 0xd9914450-0xd99144f4] [ 0.004644] ACPI: Reserving TCPA table memory at [mem 0xd99144f8-0xd9914529] [ 0.004645] ACPI: Reserving DMAR table memory at [mem 0xd9914530-0xd99145e7] [ 0.004690] No NUMA configuration found [ 0.004691] Faking a node at [mem 0x0000000000000000-0x000000081fdfffff] [ 0.004694] NODE_DATA(0) allocated [mem 0x81fdfb000-0x81fdfffff] [ 0.004730] Zone ranges: [ 0.004731] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004732] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004734] Normal [mem 0x0000000100000000-0x000000081fdfffff] [ 0.004735] Device empty [ 0.004736] Movable zone start for each node [ 0.004736] Early memory node ranges [ 0.004737] node 0: [mem 0x0000000000001000-0x000000000004efff] [ 0.004738] node 0: [mem 0x0000000000050000-0x000000000009dfff] [ 0.004738] node 0: [mem 0x0000000000100000-0x00000000c655bfff] [ 0.004739] node 0: [mem 0x00000000c6563000-0x00000000c69a7fff] [ 0.004740] node 0: [mem 0x00000000c6d5f000-0x00000000d96fefff] [ 0.004741] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff] [ 0.004741] node 0: [mem 0x0000000100000000-0x000000081fdfffff] [ 0.004744] Initmem setup node 0 [mem 0x0000000000001000-0x000000081fdfffff] [ 0.004748] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004749] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004769] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.009583] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.010051] On node 0, zone DMA32: 951 pages in unavailable ranges [ 0.010069] On node 0, zone DMA32: 2304 pages in unavailable ranges [ 0.055680] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.055686] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.055702] Reserving Intel graphics memory at [mem 0xdc200000-0xde1fffff] [ 0.055808] ACPI: PM-Timer IO Port: 0x408 [ 0.055814] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.055823] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.055826] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.055827] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.055831] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.055831] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.055835] TSC deadline timer available [ 0.055836] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.055852] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.055854] PM: hibernation: Registered nosave memory: [mem 0x0004f000-0x0004ffff] [ 0.055855] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.055856] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.055857] PM: hibernation: Registered nosave memory: [mem 0xc655c000-0xc6562fff] [ 0.055858] PM: hibernation: Registered nosave memory: [mem 0xc69a8000-0xc6d5efff] [ 0.055859] PM: hibernation: Registered nosave memory: [mem 0xd96ff000-0xd98f4fff] [ 0.055860] PM: hibernation: Registered nosave memory: [mem 0xd98f5000-0xd9914fff] [ 0.055861] PM: hibernation: Registered nosave memory: [mem 0xd9915000-0xd9a06fff] [ 0.055861] PM: hibernation: Registered nosave memory: [mem 0xd9a07000-0xd9f7ffff] [ 0.055862] PM: hibernation: Registered nosave memory: [mem 0xd9f80000-0xd9ffefff] [ 0.055863] PM: hibernation: Registered nosave memory: [mem 0xda000000-0xdbffffff] [ 0.055864] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xde1fffff] [ 0.055864] PM: hibernation: Registered nosave memory: [mem 0xde200000-0xfebfffff] [ 0.055865] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.055865] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.055866] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.055866] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.055867] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.055868] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.055868] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.055869] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.055870] [mem 0xde200000-0xfebfffff] available for PCI devices [ 0.055872] Booting paravirtualized kernel on bare hardware [ 0.055874] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.060477] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.060805] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.060810] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.060812] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.060827] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=HASH_FD6-C320-E37C-B81A-954728FB9043 rw rootflags=subvol=@ loglevel=3 nowatchdog nvme_load=YES [ 0.060896] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-zen nvme_load=YES", will be passed to user space. [ 0.060920] random: crng init done [ 0.064080] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.065725] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.065815] Fallback order for Node 0: 0 [ 0.065819] Built 1 zonelists, mobility grouping on. Total pages: 8229356 [ 0.065820] Policy zone: Normal [ 0.066037] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.066045] software IO TLB: area num 8. [ 0.149285] Memory: 32489868K/33440632K available (18432K kernel code, 2140K rwdata, 12632K rodata, 3536K init, 3644K bss, 950504K reserved, 0K cma-reserved) [ 0.149396] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.149405] Kernel/User page tables isolation: enabled [ 0.149434] ftrace: allocating 45279 entries in 177 pages [ 0.156308] ftrace: allocated 177 pages with 4 groups [ 0.156373] Dynamic Preempt: full [ 0.156400] rcu: Preemptible hierarchical RCU implementation. [ 0.156401] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.156402] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.156403] Trampoline variant of Tasks RCU enabled. [ 0.156403] Rude variant of Tasks RCU enabled. [ 0.156403] Tracing variant of Tasks RCU enabled. [ 0.156404] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.156404] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.158571] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.158741] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.158843] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.158868] Console: colour dummy device 80x25 [ 0.158870] printk: console [tty0] enabled [ 0.158903] ACPI: Core revision 20230331 [ 0.159000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.159012] APIC: Switch to symmetric I/O mode setup [ 0.159014] DMAR: Host address width 39 [ 0.159014] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.159019] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.159020] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.159023] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.159025] DMAR: RMRR base: 0x000000d988b000 end: 0x000000d9897fff [ 0.159026] DMAR: RMRR base: 0x000000dc000000 end: 0x000000de1fffff [ 0.159028] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.159029] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.159030] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.159484] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.159485] x2apic enabled [ 0.159491] Switched APIC routing to cluster x2apic. [ 0.159897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.164013] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c6cf0e09c, max_idle_ns: 440795347332 ns [ 0.164017] Calibrating delay loop (skipped), value calculated using timer frequency.. 7184.00 BogoMIPS (lpj=3592001) [ 0.164037] CPU0: Thermal monitoring enabled (TM1) [ 0.164062] process: using mwait in idle threads [ 0.164066] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.164067] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.164070] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.164072] Spectre V2 : Mitigation: Retpolines [ 0.164073] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.164073] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.164074] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.164075] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.164076] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.164077] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.164080] MDS: Mitigation: Clear CPU buffers [ 0.164080] MMIO Stale Data: Unknown: No mitigations [ 0.164081] SRBDS: Mitigation: Microcode [ 0.164085] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.164086] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.164087] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.164088] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.164089] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.178372] Freeing SMP alternatives memory: 48K [ 0.178375] pid_max: default: 32768 minimum: 301 [ 0.182703] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity [ 0.182714] landlock: Up and running. [ 0.182715] Yama: becoming mindful. [ 0.182720] LSM support for eBPF active [ 0.182758] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.182784] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183071] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.183187] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183188] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183203] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183203] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183212] cblist_init_generic: Setting adjustable number of callback queues. [ 0.183213] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.183222] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.183253] ... version: 3 [ 0.183254] ... bit width: 48 [ 0.183254] ... generic registers: 4 [ 0.183255] ... value mask: 0000ffffffffffff [ 0.183256] ... max period: 00007fffffffffff [ 0.183256] ... fixed-purpose events: 3 [ 0.183257] ... event mask: 000000070000000f [ 0.183347] signal: max sigframe size: 1776 [ 0.183361] Estimated ratio of average max frequency by base frequency (times 1024): 1080 [ 0.183381] rcu: Hierarchical SRCU implementation. [ 0.183382] rcu: Max phase no-delay instances is 400. [ 0.183873] smp: Bringing up secondary CPUs ... [ 0.183945] x86: Booting SMP configuration: [ 0.183946] .... node #0, CPUs: #1 #2 #3 #4 [ 0.189535] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.189535] #5 #6 #7 [ 0.191185] smp: Brought up 1 node, 8 CPUs [ 0.191185] smpboot: Max logical packages: 1 [ 0.191185] smpboot: Total of 8 processors activated (57472.01 BogoMIPS) [ 0.193050] devtmpfs: initialized [ 0.193053] x86/mm: Memory block size: 128MB [ 0.194587] ACPI: PM: Registering ACPI NVS region [mem 0xc655c000-0xc6562fff] (28672 bytes) [ 0.194587] ACPI: PM: Registering ACPI NVS region [mem 0xd9915000-0xd9a06fff] (991232 bytes) [ 0.194587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.194587] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.194587] pinctrl core: initialized pinctrl subsystem [ 0.194587] PM: RTC time: 01:14:48, date: 2023-08-23 [ 0.195151] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.195404] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.195599] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.195791] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.195810] thermal_sys: Registered thermal governor 'fair_share' [ 0.195810] thermal_sys: Registered thermal governor 'bang_bang' [ 0.195810] thermal_sys: Registered thermal governor 'step_wise' [ 0.195810] thermal_sys: Registered thermal governor 'user_space' [ 0.195810] thermal_sys: Registered thermal governor 'power_allocator' [ 0.195810] cpuidle: using governor ladder [ 0.195810] cpuidle: using governor menu [ 0.195810] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.195810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.195810] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.195810] PCI: not using MMCONFIG [ 0.195810] PCI: Using configuration type 1 for base access [ 0.196043] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.196168] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.196173] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.204040] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.204040] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.204040] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.204040] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.205132] ACPI: Added _OSI(Module Device) [ 0.205134] ACPI: Added _OSI(Processor Device) [ 0.205135] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.205137] ACPI: Added _OSI(Processor Aggregator Device) [ 0.217009] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.217935] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.219349] ACPI: Dynamic OEM Table Load: [ 0.219354] ACPI: SSDT 0xFFFF9DE080ED6000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.219634] ACPI: Dynamic OEM Table Load: [ 0.219634] ACPI: SSDT 0xFFFF9DE080EE4000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.219973] ACPI: Dynamic OEM Table Load: [ 0.219976] ACPI: SSDT 0xFFFF9DE081858000 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.221662] ACPI: Interpreter enabled [ 0.221684] ACPI: PM: (supports S0 S3 S4 S5) [ 0.221685] ACPI: Using IOAPIC for interrupt routing [ 0.222187] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.222689] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.222696] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.222697] PCI: Using E820 reservations for host bridge windows [ 0.222905] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.231550] ACPI: \_TZ_.FN00: New power resource [ 0.231585] ACPI: \_TZ_.FN01: New power resource [ 0.231619] ACPI: \_TZ_.FN02: New power resource [ 0.231650] ACPI: \_TZ_.FN03: New power resource [ 0.231681] ACPI: \_TZ_.FN04: New power resource [ 0.232314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.232319] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.232448] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.232564] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] [ 0.232565] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.232999] PCI host bridge to bus 0000:00 [ 0.233001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.233002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.233004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.233005] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.233006] pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff window] [ 0.233007] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.233020] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.233074] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.233103] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.233354] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.233360] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.233365] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.233368] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.233377] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.233380] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.233447] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.233453] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit] [ 0.233526] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.233540] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.233590] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.233663] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.233678] pci 0000:00:16.0: reg 0x10: [mem 0xf7e40000-0xf7e4000f 64bit] [ 0.233731] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.233769] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.233779] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.233785] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3e000-0xf7e3efff] [ 0.233870] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.233881] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 0.233888] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff] [ 0.233895] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.233943] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.233998] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.234012] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff] [ 0.234084] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.234147] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.234159] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.234213] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.234279] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.234343] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.234575] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.234640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.234873] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.234937] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.235172] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.235237] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.235472] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.235486] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff] [ 0.235558] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.235626] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.235779] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.235789] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.235796] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.235802] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.235808] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.235814] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.235820] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff] [ 0.235848] pci 0000:00:1f.2: PME# supported from D3hot [ 0.235901] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.235915] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit] [ 0.235932] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.236011] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.236059] acpiphp: Slot [1] registered [ 0.236064] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.236134] pci 0000:03:00.0: [14f1:8880] type 00 class 0x040000 [ 0.236168] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit] [ 0.236347] pci 0000:03:00.0: supports D1 D2 [ 0.236348] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.240033] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.240038] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf79fffff] [ 0.240106] pci 0000:04:00.0: [1b21:1182] type 01 class 0x060400 [ 0.240158] pci 0000:04:00.0: enabling Extended Tags [ 0.240224] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.240356] pci 0000:00:1c.3: PCI bridge to [bus 04-07] [ 0.240359] pci 0000:00:1c.3: bridge window [io 0xd000-0xefff] [ 0.240362] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff] [ 0.240422] pci 0000:05:03.0: [1b21:1182] type 01 class 0x060400 [ 0.240478] pci 0000:05:03.0: enabling Extended Tags [ 0.240541] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold [ 0.240637] pci 0000:05:07.0: [1b21:1182] type 01 class 0x060400 [ 0.240692] pci 0000:05:07.0: enabling Extended Tags [ 0.240754] pci 0000:05:07.0: PME# supported from D0 D3hot D3cold [ 0.240856] pci 0000:04:00.0: PCI bridge to [bus 05-07] [ 0.240863] pci 0000:04:00.0: bridge window [io 0xd000-0xefff] [ 0.240866] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7dfffff] [ 0.240932] pci 0000:06:00.0: [10ec:8125] type 00 class 0x020000 [ 0.240958] pci 0000:06:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.240990] pci 0000:06:00.0: reg 0x18: [mem 0xf7d10000-0xf7d1ffff 64bit] [ 0.241011] pci 0000:06:00.0: reg 0x20: [mem 0xf7d20000-0xf7d23fff 64bit] [ 0.241024] pci 0000:06:00.0: reg 0x30: [mem 0xf7d00000-0xf7d0ffff pref] [ 0.241189] pci 0000:06:00.0: supports D1 D2 [ 0.241190] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241505] pci 0000:05:03.0: PCI bridge to [bus 06] [ 0.241512] pci 0000:05:03.0: bridge window [io 0xe000-0xefff] [ 0.241515] pci 0000:05:03.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.241585] pci 0000:07:00.0: [10ec:8125] type 00 class 0x020000 [ 0.241611] pci 0000:07:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.241643] pci 0000:07:00.0: reg 0x18: [mem 0xf7c10000-0xf7c1ffff 64bit] [ 0.241662] pci 0000:07:00.0: reg 0x20: [mem 0xf7c20000-0xf7c23fff 64bit] [ 0.241675] pci 0000:07:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref] [ 0.241840] pci 0000:07:00.0: supports D1 D2 [ 0.241841] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242155] pci 0000:05:07.0: PCI bridge to [bus 07] [ 0.242161] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] [ 0.242165] pci 0000:05:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.242243] pci 0000:08:00.0: [1b21:2812] type 01 class 0x060400 [ 0.242294] pci 0000:08:00.0: enabling Extended Tags [ 0.242367] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.242436] pci 0000:08:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.242536] pci 0000:00:1c.4: PCI bridge to [bus 08-0b] [ 0.242541] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7bfffff] [ 0.242593] pci 0000:09:00.0: [1b21:2812] type 01 class 0x060400 [ 0.242645] pci 0000:09:00.0: enabling Extended Tags [ 0.242719] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.242877] pci 0000:09:08.0: [1b21:2812] type 01 class 0x060400 [ 0.242928] pci 0000:09:08.0: enabling Extended Tags [ 0.243002] pci 0000:09:08.0: PME# supported from D0 D3hot D3cold [ 0.243152] pci 0000:08:00.0: PCI bridge to [bus 09-0b] [ 0.243160] pci 0000:08:00.0: bridge window [mem 0xf7a00000-0xf7bfffff] [ 0.243220] pci 0000:0a:00.0: [15b7:5009] type 00 class 0x010802 [ 0.243248] pci 0000:0a:00.0: reg 0x10: [mem 0xf7b00000-0xf7b03fff 64bit] [ 0.243289] pci 0000:0a:00.0: reg 0x20: [mem 0xf7b04000-0xf7b040ff 64bit] [ 0.243498] pci 0000:0a:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.243589] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.243597] pci 0000:09:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.243655] pci 0000:0b:00.0: [c0a9:540a] type 00 class 0x010802 [ 0.243684] pci 0000:0b:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit] [ 0.243752] pci 0000:0b:00.0: enabling Extended Tags [ 0.243937] pci 0000:0b:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.244021] pci 0000:09:08.0: PCI bridge to [bus 0b] [ 0.244029] pci 0000:09:08.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.244828] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.244867] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.244904] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.244942] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.244979] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 0.245017] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.245018] ACPI: PCI: Interrupt link LNKF disabled [ 0.245056] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.245093] ACPI: PCI: Interrupt link LNKH configured for IRQ 5 [ 0.246342] iommu: Default domain type: Translated [ 0.246342] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.246342] SCSI subsystem initialized [ 0.246342] libata version 3.00 loaded. [ 0.246342] ACPI: bus type USB registered [ 0.246342] usbcore: registered new interface driver usbfs [ 0.246342] usbcore: registered new interface driver hub [ 0.246342] usbcore: registered new device driver usb [ 0.246342] pps_core: LinuxPPS API ver. 1 registered [ 0.246342] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.246342] PTP clock support registered [ 0.246342] EDAC MC: Ver: 3.0.0 [ 0.246342] efivars: Registered efivars operations [ 0.246342] NetLabel: Initializing [ 0.246342] NetLabel: domain hash size = 128 [ 0.246342] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.246342] NetLabel: unlabeled traffic allowed by default [ 0.246342] mctp: management component transport protocol core [ 0.246342] NET: Registered PF_MCTP protocol family [ 0.246342] PCI: Using ACPI for IRQ routing [ 0.247988] PCI: pci_cache_line_size set to 64 bytes [ 0.248015] e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff] [ 0.248015] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.248015] e820: reserve RAM buffer [mem 0xc655c000-0xc7ffffff] [ 0.248015] e820: reserve RAM buffer [mem 0xc69a8000-0xc7ffffff] [ 0.248015] e820: reserve RAM buffer [mem 0xd96ff000-0xdbffffff] [ 0.248015] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff] [ 0.248015] e820: reserve RAM buffer [mem 0x81fe00000-0x81fffffff] [ 0.248031] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.248031] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.248031] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.248031] vgaarb: loaded [ 0.249101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.249107] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.251060] clocksource: Switched to clocksource tsc-early [ 0.258319] VFS: Disk quotas dquot_6.6.0 [ 0.258334] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.258419] pnp: PnP ACPI init [ 0.258500] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.258586] pnp 00:01: can't evaluate _CRS: 12311 [ 0.258667] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.258775] system 00:04: [io 0x0a20-0x0a3f] has been reserved [ 0.258777] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 0.258864] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.259004] pnp 00:08: [dma 0 disabled] [ 0.259544] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.259547] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.259548] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.259550] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.259551] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.259552] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.259553] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.259554] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.259556] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 0.259557] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.259558] system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.259559] system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.259771] pnp: PnP ACPI: found 11 devices [ 0.265795] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.265854] NET: Registered PF_INET protocol family [ 0.265968] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.268366] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.268404] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.268502] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.268733] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.268927] TCP: Hash tables configured (established 262144 bind 65536) [ 0.269012] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.269077] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.269137] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.269199] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.269206] NET: Registered PF_XDP protocol family [ 0.269212] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.269215] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.269217] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.269228] pci 0000:00:1c.0: BAR 14: assigned [mem 0xde200000-0xde3fffff] [ 0.269230] pci 0000:00:1c.0: BAR 15: assigned [mem 0xde400000-0xde5fffff 64bit pref] [ 0.269232] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.269234] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.269240] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.269241] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.269245] pci 0000:00:1c.0: bridge window [mem 0xde200000-0xde3fffff] [ 0.269256] pci 0000:00:1c.0: bridge window [mem 0xde400000-0xde5fffff 64bit pref] [ 0.269261] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.269264] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf79fffff] [ 0.269271] pci 0000:05:03.0: PCI bridge to [bus 06] [ 0.269273] pci 0000:05:03.0: bridge window [io 0xe000-0xefff] [ 0.269278] pci 0000:05:03.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.269287] pci 0000:05:07.0: PCI bridge to [bus 07] [ 0.269289] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] [ 0.269294] pci 0000:05:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.269303] pci 0000:04:00.0: PCI bridge to [bus 05-07] [ 0.269305] pci 0000:04:00.0: bridge window [io 0xd000-0xefff] [ 0.269310] pci 0000:04:00.0: bridge window [mem 0xf7c00000-0xf7dfffff] [ 0.269318] pci 0000:00:1c.3: PCI bridge to [bus 04-07] [ 0.269320] pci 0000:00:1c.3: bridge window [io 0xd000-0xefff] [ 0.269324] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff] [ 0.269330] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.269335] pci 0000:09:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.269343] pci 0000:09:08.0: PCI bridge to [bus 0b] [ 0.269348] pci 0000:09:08.0: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.269356] pci 0000:08:00.0: PCI bridge to [bus 09-0b] [ 0.269360] pci 0000:08:00.0: bridge window [mem 0xf7a00000-0xf7bfffff] [ 0.269368] pci 0000:00:1c.4: PCI bridge to [bus 08-0b] [ 0.269372] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7bfffff] [ 0.269378] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.269380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.269381] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.269382] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.269382] pci_bus 0000:00: resource 8 [mem 0xde200000-0xfeafffff window] [ 0.269384] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.269385] pci_bus 0000:02: resource 1 [mem 0xde200000-0xde3fffff] [ 0.269386] pci_bus 0000:02: resource 2 [mem 0xde400000-0xde5fffff 64bit pref] [ 0.269387] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf79fffff] [ 0.269388] pci_bus 0000:04: resource 0 [io 0xd000-0xefff] [ 0.269389] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7dfffff] [ 0.269390] pci_bus 0000:05: resource 0 [io 0xd000-0xefff] [ 0.269391] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7dfffff] [ 0.269392] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.269392] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.269394] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 0.269394] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.269395] pci_bus 0000:08: resource 1 [mem 0xf7a00000-0xf7bfffff] [ 0.269396] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7bfffff] [ 0.269397] pci_bus 0000:0a: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.269398] pci_bus 0000:0b: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.286315] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x820 took 16274 usecs [ 0.303324] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x820 took 16591 usecs [ 0.303365] PCI: CLS 64 bytes, default 64 [ 0.303381] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.303382] software IO TLB: mapped [mem 0x00000000c255c000-0x00000000c655c000] (64MB) [ 0.303409] Trying to unpack rootfs image as initramfs... [ 0.308776] Initialise system trusted keyrings [ 0.308785] Key type blacklist registered [ 0.308822] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 0.308832] zbud: loaded [ 0.308948] integrity: Platform Keyring initialized [ 0.308950] integrity: Machine keyring initialized [ 0.316985] Key type asymmetric registered [ 0.316987] Asymmetric key parser 'x509' registered [ 0.316998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.317035] io scheduler mq-deadline registered [ 0.317036] io scheduler kyber registered [ 0.317042] io scheduler bfq registered [ 0.318419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.318850] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.322291] ACPI: button: Power Button [PWRB] [ 0.322322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.326291] ACPI: button: Power Button [PWRF] [ 0.326822] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.326824] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.327004] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.327005] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.327111] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.327218] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.328519] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.328684] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.328868] Non-volatile memory driver v1.3 [ 0.328870] Linux agpgart interface v0.103 [ 0.332272] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.347640] Freeing initrd memory: 16936K [ 0.361465] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.362126] ahci 0000:00:1f.2: version 3.0 [ 0.362301] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x2f impl SATA mode [ 0.362304] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.374796] scsi host0: ahci [ 0.375054] scsi host1: ahci [ 0.375298] scsi host2: ahci [ 0.375410] scsi host3: ahci [ 0.375510] scsi host4: ahci [ 0.375598] scsi host5: ahci [ 0.375620] ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 35 [ 0.375623] ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 35 [ 0.375625] ata3: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a200 irq 35 [ 0.375627] ata4: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a280 irq 35 [ 0.375628] ata5: DUMMY [ 0.375630] ata6: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a380 irq 35 [ 0.375726] ACPI: bus type drm_connector registered [ 0.376084] usbcore: registered new interface driver usbserial_generic [ 0.376088] usbserial: USB Serial support registered for generic [ 0.376155] rtc_cmos 00:02: RTC can wake from S4 [ 0.376272] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.376278] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.376293] ehci-pci 0000:00:1d.0: debug port 2 [ 0.376377] rtc_cmos 00:02: registered as rtc0 [ 0.376423] rtc_cmos 00:02: setting system clock to 2023-08-23T01:14:48 UTC (1692753288) [ 0.376443] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.376579] intel_pstate: Intel P-state driver initializing [ 0.376860] ledtrig-cpu: registered to indicate activity on CPUs [ 0.377111] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.377244] fbcon: Deferring console take-over [ 0.377250] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.377280] hid: raw HID events driver (C) Jiri Kosina [ 0.377345] drop_monitor: Initializing network drop monitor service [ 0.380222] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000 [ 0.385824] Initializing XFRM netlink socket [ 0.385851] NET: Registered PF_INET6 protocol family [ 0.386274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.386576] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 0.386579] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.386580] usb usb1: Product: EHCI Host Controller [ 0.386581] usb usb1: Manufacturer: Linux 6.4.11-zen2-1-zen ehci_hcd [ 0.386582] usb usb1: SerialNumber: ... [ 0.386717] hub 1-0:1.0: USB hub found [ 0.386743] hub 1-0:1.0: 3 ports detected [ 0.386975] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.386980] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.386991] ehci-pci 0000:00:1a.0: debug port 2 [ 0.390616] Segment Routing with IPv6 [ 0.390617] RPL Segment Routing with IPv6 [ 0.390624] In-situ OAM (IOAM) with IPv6 [ 0.390644] NET: Registered PF_PACKET protocol family [ 0.390927] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 0.391177] microcode: Microcode Update Driver: v2.2. [ 0.391183] IPI shorthand broadcast: enabled [ 0.392347] sched_clock: Marking stable (392001014, 245752)->(397687158, -5440392) [ 0.392483] registered taskstats version 1 [ 0.392893] Loading compiled-in X.509 certificates [ 0.394880] Loaded X.509 cert 'Build time autogenerated kernel key: 4d40984d437c74a9815bec3cbf02947bc87298db' [ 0.395667] zswap: loaded using pool zstd/zsmalloc [ 0.396891] Key type .fscrypt registered [ 0.396892] Key type fscrypt-provisioning registered [ 0.397322] integrity: Loading X.509 certificate: UEFI:db [ 0.397341] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.397365] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.397366] integrity: Loading X.509 certificate: UEFI:db [ 0.397388] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.397389] integrity: Loading X.509 certificate: UEFI:db [ 0.397396] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 0.397398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.397399] usb usb2: Product: EHCI Host Controller [ 0.397410] integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529' [ 0.397410] usb usb2: Manufacturer: Linux 6.4.11-zen2-1-zen ehci_hcd [ 0.397411] usb usb2: SerialNumber: ... [ 0.397833] hub 2-0:1.0: USB hub found [ 0.397838] hub 2-0:1.0: 3 ports detected [ 0.398755] PM: Magic number: 3:13:206 [ 0.398806] acpi device:2e: hash matches [ 0.400737] RAS: Correctable Errors collector initialized. [ 0.400787] clk: Disabling unused clocks [ 0.624308] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.640311] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.684501] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.684522] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.684536] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.684549] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.684565] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.688840] ata2.00: ATA-9: Timetec MS05, U1013A0, max UDMA/133 [ 0.689655] ata6.00: ACPI cmd f5/XXX(SECURITY FREEZE LOCK) filtered out [ 0.689661] ata6.00: ACPI cmd b1/XXX(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.689820] ata3.00: ATA-8: WDC WD20EARS-42S0XB0, 12.01D04, max UDMA/133 [ 0.690530] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.690951] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.695366] ata6.00: ATA-8: WDC WD20EARS-42S0XB0, 12.01D04, max UDMA/133 [ 0.695994] ata3.00: configured for UDMA/133 [ 0.696003] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.699714] ata2.00: configured for UDMA/133 [ 0.702318] ata6.00: ACPI cmd f5/XXX(SECURITY FREEZE LOCK) filtered out [ 0.702324] ata6.00: ACPI cmd b1/XXX(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.707552] ata6.00: configured for UDMA/133 [ 0.715352] ata1.00: ATA-10: ST1000LM035-1RK172, 0001, max UDMA/133 [ 0.720053] ata4.00: ATA-8: ST500LM021-1KJ152, 0002LIM1, max UDMA/133 [ 0.720057] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 0.752913] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.752929] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.753311] hub 1-1:1.0: USB hub found [ 0.753412] hub 1-1:1.0: 8 ports detected [ 0.768927] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.768932] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.769349] hub 2-1:1.0: USB hub found [ 0.769569] hub 2-1:1.0: 6 ports detected [ 0.796443] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.830335] ata4.00: configured for UDMA/133 [ 0.845544] ata1.00: configured for UDMA/133 [ 0.845673] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 0001 PQ: 0 ANSI: 5 [ 0.846059] scsi 1:0:0:0: Direct-Access ATA Timetec MS05 3A0 PQ: 0 ANSI: 5 [ 0.846111] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.846114] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.846153] sd 0:0:0:0: [sda] Write Protect is off [ 0.846157] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.846231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.846318] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 0.846338] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 0.846353] sd 1:0:0:0: [sdb] Write Protect is off [ 0.846356] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.846378] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.846405] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-42S 1D04 PQ: 0 ANSI: 5 [ 0.846409] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 0.846719] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.846722] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 0.846735] scsi 3:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5 [ 0.846736] sd 2:0:0:0: [sdc] Write Protect is off [ 0.846739] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.846762] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.846800] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 0.847022] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 0.847025] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 0.847034] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-42S 1D04 PQ: 0 ANSI: 5 [ 0.847040] sd 3:0:0:0: [sdd] Write Protect is off [ 0.847043] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 0.847066] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.847102] sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 0.847264] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.847266] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 0.847272] sd 5:0:0:0: [sde] Write Protect is off [ 0.847273] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 0.847298] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.847306] sd 5:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 0.847829] sdb: sdb1 sdb2 sdb3 [ 0.847926] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.897195] sdc: sdc1 [ 0.897465] sd 2:0:0:0: [sdc] Attached SCSI disk [ 0.902297] sda: sda1 [ 0.902437] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.905118] sde: sde1 [ 0.905178] sd 5:0:0:0: [sde] Attached SCSI disk [ 0.907055] sdd: sdd1 [ 0.907165] sd 3:0:0:0: [sdd] Attached SCSI disk [ 0.908063] Freeing unused decrypted memory: 2036K [ 0.908377] Freeing unused kernel image (initmem) memory: 3536K [ 0.915347] Write protecting the kernel read-only data: 32768k [ 0.915639] Freeing unused kernel image (rodata/data gap) memory: 1704K [ 0.984666] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.984669] rodata_test: all tests were successful [ 0.984671] x86/mm: Checking user space page tables [ 1.023907] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.023919] Run /init as init process [ 1.023920] with arguments: [ 1.023921] /init [ 1.023921] with environment: [ 1.023922] HOME=/ [ 1.023922] TERM=linux [ 1.023923] BOOT_IMAGE=/vmlinuz-linux-zen [ 1.023924] nvme_load=YES [ 1.060427] fbcon: Taking over console [ 1.061020] Console: switching to colour frame buffer device 100x37 [ 1.190179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.192974] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.193028] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.195057] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.195064] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.196142] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.196394] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.196399] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.196402] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.196448] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 1.196451] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.196453] usb usb3: Product: xHCI Host Controller [ 1.196455] usb usb3: Manufacturer: Linux 6.4.11-zen2-1-zen xhci-hcd [ 1.196456] usb usb3: SerialNumber: ... [ 1.196619] hub 3-0:1.0: USB hub found [ 1.196641] hub 3-0:1.0: 15 ports detected [ 1.203931] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04 [ 1.203937] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.203939] usb usb4: Product: xHCI Host Controller [ 1.203940] usb usb4: Manufacturer: Linux 6.4.11-zen2-1-zen xhci-hcd [ 1.203942] usb usb4: SerialNumber: ... [ 1.204064] hub 4-0:1.0: USB hub found [ 1.204079] hub 4-0:1.0: 6 ports detected [ 1.204748] usb: port power management may be unreliable [ 1.209542] nvme nvme1: pci function 0000:0a:00.0 [ 1.209542] nvme nvme0: pci function 0000:0b:00.0 [ 1.217917] nvme nvme0: missing or invalid SUBNQN field. [ 1.219099] nvme nvme1: allocated 32 MiB host memory buffer. [ 1.220209] nvme nvme1: 8/0/0 default/read/poll queues [ 1.223769] nvme1n1: p1 [ 1.342289] tsc: Refined TSC clocksource calibration: 3591.684 MHz [ 1.342296] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a352758, max_idle_ns: 440795217409 ns [ 1.342320] clocksource: Switched to clocksource tsc [ 1.440292] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.569020] usb 3-1: New USB device found, idVendor=291a, idProduct=b817, bcdDevice= 4.63 [ 1.569025] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.569026] usb 3-1: Product: USB2.0 Hub [ 1.569027] usb 3-1: Manufacturer: Anker [ 1.570156] hub 3-1:1.0: USB hub found [ 1.570287] hub 3-1:1.0: 5 ports detected [ 1.693298] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.696606] nvme nvme0: allocated 128 MiB host memory buffer. [ 1.708061] usb 4-1: New USB device found, idVendor=291a, idProduct=a817, bcdDevice= 4.63 [ 1.708065] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.708067] usb 4-1: Product: USB3.0 Hub [ 1.708068] usb 4-1: Manufacturer: Anker [ 1.709526] hub 4-1:1.0: USB hub found [ 1.709668] hub 4-1:1.0: 4 ports detected [ 1.789122] nvme nvme0: 8/0/0 default/read/poll queues [ 1.806459] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.813418] nvme0n1: p1 [ 1.820290] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1.825511] raid6: skipped pq benchmark and selected avx2x4 [ 1.825513] raid6: using avx2x2 recovery algorithm [ 1.827784] xor: measuring software checksum speed [ 1.828077] prefetch64-sse : 33743 MB/sec [ 1.828413] generic_sse : 29593 MB/sec [ 1.828414] xor: using function: prefetch64-sse (33743 MB/sec) [ 1.842238] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.921280] Btrfs loaded, zoned=yes, fsverity=yes [ 1.922293] BTRFS: device fsid HASH_FD6-C320-E37C-B81A-954728FB9043 devid 1 transid 622657 /dev/nvme1n1p1 scanned by (udev-worker) (173) [ 1.923139] BTRFS: device fsid HASH_FD6-C320-E37C-B81A-954728FB9043 devid 2 transid 622657 /dev/nvme0n1p1 scanned by (udev-worker) (151) [ 1.948698] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56 [ 1.948701] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.948703] usb 3-2: Product: USB2.1 Hub [ 1.948704] usb 3-2: Manufacturer: GenesysLogic [ 1.949629] hub 3-2:1.0: USB hub found [ 1.949892] hub 3-2:1.0: 4 ports detected [ 1.952456] BTRFS info (device nvme1n1p1): using crc32c (crc32c-intel) checksum algorithm [ 1.952462] BTRFS info (device nvme1n1p1): using free space tree [ 2.061438] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.076410] usb 4-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56 [ 2.076414] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.076415] usb 4-2: Product: USB3.1 Hub [ 2.076416] usb 4-2: Manufacturer: GenesysLogic [ 2.078575] hub 4-2:1.0: USB hub found [ 2.078899] hub 4-2:1.0: 4 ports detected [ 2.287787] BTRFS info (device nvme1n1p1): enabling ssd optimizations [ 2.287792] BTRFS info (device nvme1n1p1): auto enabling async discard [ 2.603425] systemd[1]: systemd 254.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 2.603431] systemd[1]: Detected architecture x86-64. [ 2.607325] systemd[1]: Hostname set to ... [ 2.689016] systemd[1]: bpf-lsm: LSM BPF program attached [ 2.936467] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 2.956956] usb 4-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.01 [ 2.956963] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.956965] usb 4-3: Product: USB3.2 Hub [ 2.956967] usb 4-3: Manufacturer: Generic [ 2.958821] hub 4-3:1.0: USB hub found [ 2.960018] hub 4-3:1.0: 4 ports detected [ 3.016270] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd [ 3.051452] systemd[1]: /usr/lib/systemd/system/virtlogd.service:21: Unknown key name 'LimitNOFile' in section 'Service', ignoring. [ 3.051866] systemd[1]: /usr/lib/systemd/system/libvirtd.service:34: Unknown key name 'LimitNOFile' in section 'Service', ignoring. [ 3.053560] systemd[1]: /usr/lib/systemd/system/virtlockd.service:21: Unknown key name 'LimitNOFile' in section 'Service', ignoring. [ 3.064009] systemd[1]: Configuration file /usr/local/lib/systemd/system/lactd.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.073856] systemd[1]: /usr/lib/systemd/system/tgtd.service:3: Invalid URL, ignoring: man: [ 3.073859] systemd[1]: /usr/lib/systemd/system/tgtd.service:3: Invalid URL, ignoring: tgtd(8) [ 3.084813] systemd[1]: /usr/lib/systemd/system/virtlxcd.service:27: Unknown key name 'LimitNOFile' in section 'Service', ignoring. [ 3.085519] systemd[1]: /usr/lib/systemd/system/virtqemud.service:29: Unknown key name 'LimitNOFile' in section 'Service', ignoring. [ 3.088258] systemd[1]: Queued start job for default target Graphical Interface. [ 3.093959] usb 3-1.5: New USB device found, idVendor=291a, idProduct=8338, bcdDevice= 0.01 [ 3.093964] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.093966] usb 3-1.5: Product: Anker USB-C Hub Device [ 3.093967] usb 3-1.5: Manufacturer: Anker [ 3.093968] usb 3-1.5: SerialNumber: ... [ 3.116377] systemd[1]: Created slice Virtual Machine and Container Slice. [ 3.117066] systemd[1]: Created slice Slice /system/getty. [ 3.117427] systemd[1]: Created slice Slice /system/modprobe. [ 3.117778] systemd[1]: Created slice Slice /system/serial-getty. [ 3.118096] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.118377] systemd[1]: Created slice User and Session Slice. [ 3.118456] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.118519] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.118678] systemd[1]: Set up automount ... [ 3.118757] systemd[1]: Reached target Local Encrypted Volumes. [ 3.118794] systemd[1]: Reached target Local Integrity Protected Volumes. [ 3.118834] systemd[1]: Reached target Preparation for Network. [ 3.118867] systemd[1]: Reached target Host and Network Name Lookups. [ 3.118909] systemd[1]: Reached target Slice Units. [ 3.118940] systemd[1]: Reached target Mounting snaps. [ 3.118971] systemd[1]: Reached target Swaps. [ 3.119003] systemd[1]: Reached target Local Verity Protected Volumes. [ 3.119033] systemd[1]: Reached target Libvirt guests shutdown. [ 3.119110] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.119791] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.123544] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.124430] systemd[1]: Reached target RPC Port Mapper. [ 3.126382] systemd[1]: Listening on Process Core Dump Socket. [ 3.127305] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.128142] systemd[1]: Listening on Journal Socket. [ 3.129117] systemd[1]: Listening on udev Control Socket. [ 3.129368] systemd[1]: Listening on udev Kernel Socket. [ 3.130364] systemd[1]: Mounting Huge Pages File System... [ 3.131339] systemd[1]: Mounting POSIX Message Queue File System... [ 3.132273] systemd[1]: Mounting NFSD configuration filesystem... [ 3.133287] systemd[1]: Mounting Kernel Debug File System... [ 3.134318] systemd[1]: Mounting Kernel Trace File System... [ 3.134581] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 3.135548] systemd[1]: Mounting Temporary Directory /tmp... [ 3.136112] systemd[1]: Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 3.137351] systemd[1]: Starting Create List of Static Device Nodes... [ 3.142059] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.143314] systemd[1]: Starting Load Kernel Module configfs... [ 3.144576] systemd[1]: Starting Load Kernel Module dm_mod... [ 3.146295] systemd[1]: Starting Load Kernel Module drm... [ 3.147768] systemd[1]: Starting Load Kernel Module fuse... [ 3.150153] systemd[1]: Starting Load Kernel Module loop... [ 3.152064] systemd[1]: Starting Journal Service... [ 3.153814] systemd[1]: Starting Load Kernel Modules... [ 3.157511] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-HASH_466-8928-06B7-84F7-7C8411FA7941). [ 3.158926] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.160706] systemd[1]: Starting Coldplug All udev Devices... [ 3.162494] systemd[1]: Mounted Huge Pages File System. [ 3.162832] systemd[1]: Mounted POSIX Message Queue File System. [ 3.163020] systemd[1]: Mounted Kernel Debug File System. [ 3.163210] systemd[1]: Mounted Kernel Trace File System. [ 3.163401] systemd[1]: Mounted Temporary Directory /tmp. [ 3.178296] loop: module loaded [ 3.178475] fuse: init (API version 7.38) [ 3.179202] device-mapper: uevent: version 1.0.3 [ 3.179348] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 3.180433] systemd[1]: Finished Create List of Static Device Nodes. [ 3.180963] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.182268] usb 3-2.2: new high-speed USB device number 6 using xhci_hcd [ 3.182577] RPC: Registered named UNIX socket transport module. [ 3.182579] RPC: Registered udp transport module. [ 3.182580] RPC: Registered tcp transport module. [ 3.182580] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.183841] systemd-journald[271]: Collecting audit messages is disabled. [ 3.185634] BTRFS info (device nvme1n1p1: state M): use zstd compression, level 3 [ 3.189787] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.189816] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.189846] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.189873] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.189897] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 3.201461] Asymmetric key parser 'pkcs8' registered [ 3.203379] systemd[1]: Finished Load Kernel Module configfs. [ 3.204874] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.218401] systemd[1]: Finished Load Kernel Module dm_mod. [ 3.218825] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.238500] systemd[1]: Finished Load Kernel Module drm. [ 3.239131] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.249468] systemd[1]: Finished Load Kernel Module fuse. [ 3.250049] systemd[1]: Started Journal Service. [ 3.351829] usb 4-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 3.376918] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01 [ 3.376923] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.376924] usb 4-1.1: Product: RTL9210B-CG [ 3.376926] usb 4-1.1: Manufacturer: Realtek [ 3.376937] usb 4-1.1: SerialNumber: ... [ 3.409108] usb 4-1.1: Enable of device-initiated U1 failed. [ 3.409855] usb 4-1.1: Enable of device-initiated U2 failed. [ 3.430409] loop0: detected capacity change from 0 to 8 [ 3.432230] loop1: detected capacity change from 0 to 129944 [ 3.433158] loop2: detected capacity change from 0 to 129976 [ 3.435327] loop3: detected capacity change from 0 to 109072 [ 3.437234] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.438144] loop4: detected capacity change from 0 to 83648 [ 3.485254] usb 3-9: new high-speed USB device number 7 using xhci_hcd [ 3.542122] usb 3-2.2: New USB device found, idVendor=0bda, idProduct=4e27, bcdDevice= 0.04 [ 3.542129] usb 3-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 3.542131] usb 3-2.2: Product: USB SPDIF Adapter [ 3.542133] usb 3-2.2: Manufacturer: Generic [ 3.542134] usb 3-2.2: SerialNumber: ... [ 3.611668] usb 3-9: New USB device found, idVendor=2001, idProduct=331e, bcdDevice= 2.10 [ 3.611672] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.611674] usb 3-9: Product: 802.11ac NIC [ 3.611675] usb 3-9: Manufacturer: Realtek [ 3.611676] usb 3-9: SerialNumber: ... [ 3.645799] e1000e: Intel(R) PRO/1000 Network Driver [ 3.645802] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.645995] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.665021] block device autoloading is deprecated and will be removed. [ 3.674219] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230331/utaddress-204) [ 3.674228] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.674231] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.674235] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.674236] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230331/utaddress-204) [ 3.674240] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.674243] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.674244] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230331/utaddress-204) [ 3.674338] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230331/utaddress-204) [ 3.674342] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.674343] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.720157] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.725284] usb 4-6: new SuperSpeed USB device number 6 using xhci_hcd [ 3.725994] mc: Linux media interface: v0.10 [ 3.730405] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.737932] usb 4-6: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 3.737939] usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 3.737941] usb 4-6: Product: ASMT105x [ 3.737943] usb 4-6: Manufacturer: ASMT [ 3.737944] usb 4-6: SerialNumber: ... [ 3.752833] r8169 0000:06:00.0: enabling device (0100 -> 0103) [ 3.752967] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.760434] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.760464] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.767320] r8169 0000:06:00.0 eth0: RTL8125B, XXX, XID 641, IRQ 57 [ 3.767327] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.767369] r8169 0000:07:00.0: enabling device (0100 -> 0103) [ 3.767499] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.770434] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 3.770743] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 3.771046] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 3.771350] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 3.771675] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 3.781704] r8169 0000:07:00.0 eth1: RTL8125B, XXX, XID 641, IRQ 58 [ 3.781712] r8169 0000:07:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.782654] videodev: Linux video capture interface: v2.00 [ 3.786997] e1000e 0000:00:19.0 eth2: (PCI Express:2.5GT/s:Width x1) XXX [ 3.787806] e1000e 0000:00:19.0 eth2: Intel(R) PRO/1000 Network Connection [ 3.787864] e1000e 0000:00:19.0 eth2: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.791377] md127: detected capacity change from 0 to 3421423616 [ 3.799455] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.799458] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.799459] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.799460] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.799461] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.805300] usb 4-1.4: new SuperSpeed USB device number 7 using xhci_hcd [ 3.818427] cryptd: max_cpu_qlen set to 1000 [ 3.818811] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 3.818815] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.818817] usb 4-1.4: Product: USB 10/100/1000 LAN [ 3.818819] usb 4-1.4: Manufacturer: Realtek [ 3.818820] usb 4-1.4: SerialNumber: ... [ 3.821863] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102) [ 3.822330] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102) [ 3.855880] AVX2 version of gcm_enc/dec engaged. [ 3.855926] AES CTR mode by8 optimization enabled [ 3.906259] usb 3-2.3: new high-speed USB device number 8 using xhci_hcd [ 3.982584] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 4.029601] usb 3-2.3: New USB device found, idVendor=19d2, idProduct=1432, bcdDevice=52.87 [ 4.029608] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.029610] usb 3-2.3: Product: ZTE Technologies MSM [ 4.029612] usb 3-2.3: Manufacturer: ZTE,Incorporated [ 4.029613] usb 3-2.3: SerialNumber: ... [ 4.098203] r8169 0000:07:00.0 enp7s0: renamed from eth1 [ 4.122277] usb 3-11: new full-speed USB device number 9 using xhci_hcd [ 4.159605] e1000e 0000:00:19.0 eno1: renamed from eth2 [ 4.179197] iTCO_vendor_support: vendor-support=0 [ 4.191434] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460) [ 4.194677] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 4.203023] Console: switching to colour dummy device 80x25 [ 4.203030] at24 0-0050: supply vcc not found, using dummy regulator [ 4.203593] at24 0-0050: 256 byte spd EEPROM, read-only [ 4.210507] at24 0-0051: supply vcc not found, using dummy regulator [ 4.242232] usb 3-11: device descriptor read/64, error -71 [ 4.255162] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 4.255631] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.255795] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.255799] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 4.255802] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.255804] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.255805] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.255807] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 4.255808] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 4.256025] at24 0-0051: 256 byte spd EEPROM, read-only [ 4.256615] at24 0-0052: supply vcc not found, using dummy regulator [ 4.264357] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.266387] at24 0-0052: 256 byte spd EEPROM, read-only [ 4.266424] at24 0-0053: supply vcc not found, using dummy regulator [ 4.266965] at24 0-0053: 256 byte spd EEPROM, read-only [ 4.298378] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 4.298979] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 4.300196] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 4.300271] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 4.300323] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 4.324800] Creating 1 MTD partitions on "intel-spi": [ 4.324807] 0x000000000000-0x000001000000 : "BIOS" [ 4.331845] REISERFS warning: read_super_block: reiserfs filesystem is deprecated and scheduled to be removed from the kernel in 2025 [ 4.331851] REISERFS (device sde1): found reiserfs format "3.6" with standard journal [ 4.331862] REISERFS (device sde1): using ordered data mode [ 4.331863] reiserfs: using flush barriers [ 4.333399] systemd-journald[271]: Received client request to flush runtime journal. [ 4.336379] systemd-journald[271]: File /var/log/journal/e2f986f1a4df49df976aaf9c43194ebe/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 4.360163] REISERFS (device sde1): journal params: device sde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 4.360446] REISERFS (device sde1): checking transaction log (sde1) [ 4.417681] usbcore: registered new interface driver usb-storage [ 4.453281] EXT4-fs (sdb2): mounted filesystem HASH_393-EEB5-8CDE-E44A-4D9DD35EA5A4 r/w with ordered data mode. Quota mode: none. [ 4.464442] usb 3-11: device descriptor read/64, error -71 [ 4.495791] REISERFS (device sde1): Using r5 hash to sort names [ 4.652713] intel_rapl_common: Found RAPL domain package [ 4.652716] intel_rapl_common: Found RAPL domain core [ 4.652718] intel_rapl_common: Found RAPL domain uncore [ 4.652719] intel_rapl_common: Found RAPL domain dram [ 4.652724] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 4.652729] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 4.680326] usb 3-11: new full-speed USB device number 10 using xhci_hcd [ 4.685555] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled [ 4.691276] XFS (sdc1): Mounting V5 Filesystem HASH_7F9-CABE-DE5D-CBED-4E90A0D40936 [ 4.720901] usb 4-1.1: Enable of device-initiated U1 failed. [ 4.721665] usb 4-1.1: Enable of device-initiated U2 failed. [ 4.732278] scsi host6: uas [ 4.735505] scsi 6:0:0:0: Direct-Access Realtek RTL9210B-CG 1.00 PQ: 0 ANSI: 6 [ 4.754014] scsi host7: uas [ 4.754079] usbcore: registered new interface driver uas [ 4.756834] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 4.759124] sd 6:0:0:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 4.759127] sd 6:0:0:0: [sdf] 4096-byte physical blocks [ 4.760612] sd 6:0:0:0: [sdf] Write Protect is off [ 4.760615] sd 6:0:0:0: [sdf] Mode Sense: 37 00 00 08 [ 4.763193] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764345] sd 6:0:0:0: [sdf] Preferred minimum I/O size 512 bytes not a multiple of physical block size (4096 bytes) [ 4.764349] sd 6:0:0:0: [sdf] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 4.765112] scsi 7:0:0:0: Direct-Access KINGSTON SA400S37240G 0 PQ: 0 ANSI: 6 [ 4.766564] XFS (md127): Mounting V5 Filesystem HASH_D2F-C9C3-D952-54DA-607D1C59A183 [ 4.767406] sd 7:0:0:0: [sdg] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 4.767483] sd 7:0:0:0: [sdg] Write Protect is off [ 4.767485] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00 [ 4.767644] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.767805] sd 7:0:0:0: [sdg] Preferred minimum I/O size 512 bytes [ 4.767806] sd 7:0:0:0: [sdg] Optimal transfer size 33553920 bytes [ 4.767953] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 4.771879] sdg: sdg1 [ 4.772116] sd 7:0:0:0: [sdg] Attached SCSI disk [ 4.777461] sdf: sdf1 [ 4.777529] sd 6:0:0:0: [sdf] Attached SCSI disk [ 4.802290] usb 3-11: device descriptor read/64, error -71 [ 4.838314] usbcore: registered new device driver r8152-cfgselector [ 4.838878] usbip-host 4-1.4: 4-1.4 is not in match_busid table... skip! [ 4.876637] cx23885: cx23885 driver version 0.0.4 loaded [ 4.876685] cx23885 0000:03:00.0: enabling device (0100 -> 0102) [ 4.876796] cx23885: CORE cx23885[0]: subsystem: 0070:2211, board: Hauppauge WinTV-HVR1270 [card=18,autodetected] [ 4.954143] XFS (sdc1): Ending clean mount [ 5.030268] usb 3-11: device descriptor read/64, error -71 [ 5.134373] usb usb3-port11: attempt power cycle [ 5.200456] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 7 using xhci_hcd [ 5.236441] r8152 4-1.4:1.0: load rtl8153a-4 v2 02/07/20 successfully [ 5.260878] r8152 4-1.4:1.0 eth0: v1.12.13 [ 5.260904] usbcore: registered new interface driver r8152 [ 5.269179] usbcore: registered new interface driver cdc_ether [ 5.272118] usbcore: registered new interface driver r8153_ecm [ 5.290005] F2FS-fs (sdf1): Mounted with checkpoint version = b31d614 [ 5.409610] XFS (md127): Ending clean mount [ 5.451250] r8152 4-1.4:1.0 enp0s20u1u4: renamed from eth0 [ 5.530300] usb 3-11: new full-speed USB device number 11 using xhci_hcd [ 5.530414] usb 3-11: Device not responding to setup address. [ 5.734358] usb 3-11: Device not responding to setup address. [ 5.942318] usb 3-11: device not accepting address 11, error -71 [ 5.997448] tveeprom: Hauppauge model 22111, rev C2F5, serial# ... [ 5.997452] tveeprom: MAC address is XXX [ 5.997454] tveeprom: tuner model is NXP 18271C2 (idx 155, type 54) [ 5.997455] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 5.997457] tveeprom: audio processor is CX23888 (idx 40) [ 5.997458] tveeprom: decoder processor is CX23888 (idx 34) [ 5.997459] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 5.997460] cx23885: cx23885[0]: hauppauge eeprom: model=22111 [ 6.057252] usb 3-11: new full-speed USB device number 12 using xhci_hcd [ 6.057351] usb 3-11: Device not responding to setup address. [ 6.086912] cx25840 9-0044: cx23888 A/V decoder found @ 0x88 (cx23885[0]) [ 6.192867] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 6.193338] ACPI: video: Video Device [PEG0] (multi-head: yes rom: no post: no) [ 6.193472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 6.193601] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 6.193635] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.207636] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.231484] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.234893] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.241632] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 6.241686] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 6.241730] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 6.262372] usb 3-11: Device not responding to setup address. [ 6.470277] usb 3-11: device not accepting address 12, error -71 [ 6.470332] usb usb3-port11: unable to enumerate USB device [ 6.584273] usb 3-12: new full-speed USB device number 13 using xhci_hcd [ 6.721229] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 6.727992] usb 3-12: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 6.727995] usb 3-12: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 6.727996] usb 3-12: Product: CSR8510 A10 [ 6.755040] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6.755042] cx23885: cx23885[0]: cx23885 based dvb card [ 6.763063] tda18271 8-0060: creating new instance [ 6.765164] tda18271: TDA18271HD/C2 detected @ 8-0060 [ 6.844327] usb 3-13: new high-speed USB device number 14 using xhci_hcd [ 6.940371] dvbdev: DVB: registering new adapter (cx23885[0]) [ 6.940377] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3305 VSB/QAM Frontend)... [ 6.940761] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 [ 6.940766] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf7800000 [ 6.967329] Registered IR keymap rc-hauppauge [ 6.972201] IR RC5(x/sz) protocol handler initialized [ 6.980120] usb 3-13: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01 [ 6.980126] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.980127] usb 3-13: Product: USB2.1 Hub [ 6.980128] usb 3-13: Manufacturer: Generic [ 6.981780] hub 3-13:1.0: USB hub found [ 6.982359] hub 3-13:1.0: 5 ports detected [ 6.994360] rc rc0: cx23885 IR (Hauppauge WinTV-HVR1270) as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rc/rc0 [ 6.994442] rc rc0: lirc_dev: driver cx23885 registered at minor = 0, raw IR receiver, no transmitter [ 6.994479] input: cx23885 IR (Hauppauge WinTV-HVR1270) as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rc/rc0/input15 [ 7.098327] usb 3-14: new high-speed USB device number 15 using xhci_hcd [ 7.226087] usb 3-14: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 7.226102] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.226108] usb 3-14: Product: Flash Drive [ 7.226112] usb 3-14: Manufacturer: Samsung [ 7.226116] usb 3-14: SerialNumber: ... [ 7.229413] usb-storage 3-14:1.0: USB Mass Storage device detected [ 7.229720] scsi host8: usb-storage 3-14:1.0 [ 7.301373] usb 3-13.1: new full-speed USB device number 16 using xhci_hcd [ 7.393617] usb 3-13.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 7.393634] usb 3-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.393636] usb 3-13.1: Product: USB Receiver [ 7.393637] usb 3-13.1: Manufacturer: Logitech [ 7.480331] usb 3-13.2: new high-speed USB device number 17 using xhci_hcd [ 7.569048] usb 3-13.2: New USB device found, idVendor=1949, idProduct=03a8, bcdDevice= 2.23 [ 7.569053] usb 3-13.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.569054] usb 3-13.2: Product: AFTMM [ 7.569055] usb 3-13.2: Manufacturer: Amazon [ 7.569056] usb 3-13.2: SerialNumber: ... [ 7.572086] usbcore: registered new device driver usbip-host [ 7.582123] vboxdrv: loading out-of-tree module taints kernel. [ 7.582129] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 7.595538] vboxdrv: Found 8 processor cores/threads [ 7.611465] vboxdrv: TSC mode is Invariant, tentative frequency 3591671531 Hz [ 7.611470] vboxdrv: Successfully loaded version 7.0.10 r158379 (interface 0x00330004) [ 7.613950] VBoxNetAdp: Successfully started. [ 7.616673] VBoxNetFlt: Successfully started. [ 7.730144] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.735681] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.852478] loop5: detected capacity change from 0 to 8 [ 7.878200] usbcore: registered new interface driver cdc_wdm [ 7.884135] Bluetooth: Core ver 2.22 [ 7.885292] NET: Registered PF_BLUETOOTH protocol family [ 7.885296] Bluetooth: HCI device and connection manager initialized [ 7.885300] Bluetooth: HCI socket layer initialized [ 7.885303] Bluetooth: L2CAP socket layer initialized [ 7.885308] Bluetooth: SCO socket layer initialized [ 7.898377] qmi_wwan 3-2.3:1.3: cdc-wdm0: USB WDM device [ 7.898984] usbcore: registered new interface driver option [ 7.898997] usbserial: USB Serial support registered for GSM modem (1-port) [ 7.914563] wwan wwan0: port wwan0qmi0 attached [ 7.915349] qmi_wwan 3-2.3:1.3 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2.3, WWAN/QMI device, XXX [ 7.915401] option 3-2.3:1.0: GSM modem (1-port) converter detected [ 7.915492] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 7.915526] option 3-2.3:1.1: GSM modem (1-port) converter detected [ 7.915590] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 7.915620] option 3-2.3:1.2: GSM modem (1-port) converter detected [ 7.915677] usb 3-2.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 7.917307] usbcore: registered new interface driver qmi_wwan [ 7.927672] usbcore: registered new interface driver btusb [ 7.929063] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb [ 7.929068] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10 [ 7.975670] Loading iSCSI transport class v2.0-870. [ 8.013298] rtw_8822bu 3-9:1.0: Firmware version 27.2.0, H2C version 13 [ 8.013682] input: Generic USB SPDIF Adapter Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:0BDA:4E27.0001/input/input16 [ 8.055924] qmi_wwan 3-2.3:1.3 wwp0s20u2u3i3: renamed from wwan0 [ 8.057907] capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use) [ 8.069529] input: Generic USB SPDIF Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:0BDA:4E27.0001/input/input17 [ 8.069904] hid-generic 0003:0BDA:4E27.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Generic USB SPDIF Adapter] on usb-0000:00:14.0-2.2/input2 [ 8.074842] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.0/0003:046D:C52B.0002/input/input18 [ 8.096973] tun: Universal TUN/TAP device driver, 1.6 [ 8.133119] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input0 [ 8.138300] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input19 [ 8.138410] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input20 [ 8.166360] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.166365] Bluetooth: BNEP filters: protocol multicast [ 8.166370] Bluetooth: BNEP socket layer initialized [ 8.168714] Bluetooth: MGMT ver 1.22 [ 8.177861] NET: Registered PF_ALG protocol family [ 8.190573] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.1/0003:046D:C52B.0003/input/input21 [ 8.190826] hid-generic 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input1 [ 8.197937] hid-generic 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input2 [ 8.197979] usbcore: registered new interface driver usbhid [ 8.197981] usbhid: USB HID core driver [ 8.280129] usbcore: registered new interface driver rtw_8822bu [ 8.294577] NET: Registered PF_QIPCRTR protocol family [ 8.375459] usbcore: registered new interface driver snd-usb-audio [ 8.394816] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13.1/input2 [ 8.502729] input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input23 [ 8.502967] input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input24 [ 8.503129] hid-generic 0003:046D:404D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:14.0-13.1/input2:1 [ 8.517280] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1617 'lxc-info' [ 8.536284] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC) [ 8.542933] r8152 4-1.4:1.0 enp0s20u1u4: carrier on [ 8.704460] r8169 0000:06:00.0 enp6s0: Link is Down [ 8.704487] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u1u4: link becomes ready [ 8.729273] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [ 8.895437] r8169 0000:07:00.0 enp7s0: Link is Down [ 8.919988] cx23885 0000:03:00.0: invalid VPD tag 0xff (size 65535) at offset 10 [ 8.939262] r8169 0000:06:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 8.957258] r8169 0000:07:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 10.698028] rfkill: input handler disabled [ 10.848317] Bluetooth: RFCOMM TTY layer initialized [ 10.848326] Bluetooth: RFCOMM socket layer initialized [ 10.848329] Bluetooth: RFCOMM ver 1.11 [ 12.049621] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 12.049661] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 12.598480] r8169 0000:06:00.0 enp6s0: Link is Up - 2.5Gbps/Full - flow control off [ 12.598505] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 12.696411] scsi 8:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6 [ 12.697011] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 12.697359] sd 8:0:0:0: [sdh] 250626566 512-byte logical blocks: (128 GB/120 GiB) [ 12.697477] sd 8:0:0:0: [sdh] Write Protect is off [ 12.697478] sd 8:0:0:0: [sdh] Mode Sense: 43 00 00 00 [ 12.697595] sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.709828] sdh: sdh1 [ 12.709979] sd 8:0:0:0: [sdh] Attached SCSI removable disk [ 12.728025] mousedev: PS/2 mouse device common for all mice [ 12.745168] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.794501] RPC: Registered rdma transport module. [ 12.794506] RPC: Registered rdma backchannel transport module. [ 12.916589] NFSD: Using nfsdcld client tracking operations. [ 12.916592] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 12.934378] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/0003:046D:C52B.0004/0003:046D:404D.0005/input/input28 [ 12.934553] logitech-hidpp-device 0003:046D:404D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-13.1/input2:1 [ 14.109683] bridge0: port 1(enp6s0) entered blocking state [ 14.109696] bridge0: port 1(enp6s0) entered disabled state [ 14.109712] r8169 0000:06:00.0 enp6s0: entered allmulticast mode [ 14.109818] r8169 0000:06:00.0 enp6s0: entered promiscuous mode [ 14.109932] bridge0: port 1(enp6s0) entered blocking state [ 14.109934] bridge0: port 1(enp6s0) entered listening state [ 19.626663] wlan0: authenticate with XXX [ 20.287453] wlan0: send auth to XXX (try 1/3) [ 20.311873] wlan0: authenticate with XXX [ 20.311880] wlan0: send auth to XXX (try 1/3) [ 20.314728] wlan0: authenticated [ 20.316289] wlan0: associate with XXX (try 1/3) [ 20.320124] wlan0: RX AssocResp from XXX (capab=0x1011 status=0 aid=21) [ 20.324861] wlan0: associated [ 20.333033] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XXX [ 20.381456] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 23.790599] warning: `pmdalinux' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 26.375277] fbcon: i915drmfb (fb0) is primary device [ 26.375326] Console: switching to colour frame buffer device 240x67 [ 26.375334] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 29.310319] bridge0: port 1(enp6s0) entered learning state [ 29.311304] bridge0: port 1(enp6s0) entered forwarding state [ 29.311388] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready [ 49.322072] systemd-journald[271]: /var/log/journal/e2f986f1a4df49df976aaf9c43194ebe/user-XXXX.journal: Boot ID changed since last record, rotating. [ 50.952044] rfkill: input handler enabled [ 56.148239] JFS: nTxBlock = 8192, nTxLock = 65536 [ 56.626067] rfkill: input handler disabled [ 56.873040] EXT4-fs (sdh1): mounted filesystem HASH_C10-95FB-BF41-C948-E1EF437B6BAC r/w with ordered data mode. Quota mode: none. [ 79.886733] usb 3-13.2: USB disconnect, device number 17 [ 82.374279] usb 3-13.2: new full-speed USB device number 18 using xhci_hcd [ 82.466218] usb 3-13.2: New USB device found, idVendor=1532, idProduct=0080, bcdDevice= 1.00 [ 82.466234] usb 3-13.2: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 82.466241] usb 3-13.2: Product: Razer Pro Click [ 82.466245] usb 3-13.2: SerialNumber: ... [ 82.476594] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.0/0003:1532:0080.0006/input/input29 [ 82.476823] hid-generic 0003:1532:0080.0006: input,hidraw3: USB HID v1.11 Mouse [Razer Pro Click] on usb-0000:00:14.0-13.2/input0 [ 82.477909] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.2/0003:1532:0080.0007/input/input30 [ 82.529542] hid-generic 0003:1532:0080.0007: input,hidraw4: USB HID v1.11 Keyboard [Razer Pro Click] on usb-0000:00:14.0-13.2/input2 [ 82.531590] input: Razer Pro Click Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.1/0003:1532:0080.0008/input/input31 [ 82.583464] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.1/0003:1532:0080.0008/input/input32 [ 82.583688] hid-generic 0003:1532:0080.0008: input,hidraw5: USB HID v1.11 Keyboard [Razer Pro Click] on usb-0000:00:14.0-13.2/input1 [ 82.749638] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.0/0003:1532:0080.0006/input/input33 [ 82.749877] razermouse 0003:1532:0080.0006: input,hidraw3: USB HID v1.11 Mouse [Razer Pro Click] on usb-0000:00:14.0-13.2/input0 [ 82.804286] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.2/0003:1532:0080.0007/input/input34 [ 82.856933] razermouse 0003:1532:0080.0007: input,hidraw4: USB HID v1.11 Keyboard [Razer Pro Click] on usb-0000:00:14.0-13.2/input2 [ 82.903310] input: Razer Pro Click as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.1/0003:1532:0080.0008/input/input35 [ 82.955492] razermouse 0003:1532:0080.0008: input,hidraw5: USB HID v1.11 Keyboard [Razer Pro Click] on usb-0000:00:14.0-13.2/input1 [ 84.920301] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 88.952438] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 92.920536] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 94.968355] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 96.952490] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 108.920558] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 114.936454] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 128.952643] rtw_8822bu 3-9:1.0: firmware failed to leave lps state [ 310.602487] st: Version 20160209, fixed bufsize 32768, s/g segs 256