[ 0.000000] microcode: microcode updated early to revision 0x95, date = 2010-10-02 [ 0.000000] Linux version 5.8.0-14-generic (XXX@XXX) (gcc (Debian 8.3.0-6endless1bem2) 8.3.0, GNU ld (GNU Binutils for Endless) 2.31.1) #15+dev115.ce93f74beos3.9.2 SMP Wed Jul 21 00:12:10 UTC 2021 (Ubuntu 5.8.0-14.15+dev115.ce93f74beos3.9.2-generic 5.8.0) [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos2)/boot/ostree/eos-HASH_643-5CE4-59F3-F243-EFE030E12D92/vmlinuz-5.8.0-14-generic root=UUID=HASH_C13-061B-1CFA-7A79-A229A0DB460B rw splash plymouth.ignore-serial-consoles quiet loglevel=0 ostree=/ostree/boot.0/eos/HASH_643-5CE4-59F3-F243-EFE030E12D92/0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4fdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f4fe000-0x000000007f508fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f509000-0x000000007f551fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f552000-0x000000007f554fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f555000-0x000000007f5bafff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f677fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f678000-0x000000007f6befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Acer Aspire 5720 /Nettiling, BIOS V1.07 06/06/2007 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1994.937 MHz processor [ 0.004973] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004976] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.004985] last_pfn = 0x7f678 max_arch_pfn = 0x400000000 [ 0.004991] MTRR default type: uncachable [ 0.004993] MTRR fixed ranges enabled: [ 0.004995] 00000-9FFFF write-back [ 0.004996] A0000-BFFFF uncachable [ 0.004997] C0000-C7FFF write-protect [ 0.004999] C8000-EFFFF uncachable [ 0.005000] F0000-FFFFF write-protect [ 0.005001] MTRR variable ranges enabled: [ 0.005003] 0 base 0FFFE0000 mask FFFFE0000 write-protect [ 0.005005] 1 base 000000000 mask F80000000 write-back [ 0.005006] 2 base 07F800000 mask FFF800000 uncachable [ 0.005008] 3 base 07F700000 mask FFFF00000 uncachable [ 0.005009] 4 disabled [ 0.005009] 5 disabled [ 0.005010] 6 disabled [ 0.005011] 7 disabled [ 0.006081] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.020707] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] [ 0.022887] check: Scanning 1 areas for low memory corruption [ 0.023563] RAMDISK: [mem 0x31c83000-0x34e38fff] [ 0.023573] ACPI: Early table checksum verification disabled [ 0.023579] ACPI: RSDP 0x00000000000FE020 000014 (v00 ACRSYS) [ 0.023583] ACPI: RSDT 0x000000007F6FE038 000044 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.023592] ACPI: FACP 0x000000007F6FD000 000074 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023600] ACPI: DSDT 0x000000007F6F5000 007C61 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023605] ACPI: FACS 0x000000007F67D000 000040 [ 0.023609] ACPI: APIC 0x000000007F6F4000 000068 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023614] ACPI: MCFG 0x000000007F6F3000 00003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023619] ACPI: SLIC 0x000000007F6F2000 000176 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023624] ACPI: HPET 0x000000007F6F1000 000038 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013) [ 0.023629] ACPI: SSDT 0x000000007F6F0000 0004C4 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.023634] ACPI: SSDT 0x000000007F6EF000 000232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.023639] ACPI: SSDT 0x000000007F6EE000 0000A0 (v01 PmRef Cpu1Tst 00003000 INTL 20051117) [ 0.023652] ACPI: Local APIC address 0xfee00000 [ 0.023782] No NUMA configuration found [ 0.023784] Faking a node at [mem 0x0000000000000000-0x000000007f677fff] [ 0.023799] NODE_DATA(0) allocated [mem 0x7f64e000-0x7f677fff] [ 0.024355] Zone ranges: [ 0.024356] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.024358] DMA32 [mem 0x0000000001000000-0x000000007f677fff] [ 0.024360] Normal empty [ 0.024361] Device empty [ 0.024362] Movable zone start for each node [ 0.024366] Early memory node ranges [ 0.024368] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.024369] node 0: [mem 0x0000000000100000-0x000000007f4fdfff] [ 0.024371] node 0: [mem 0x000000007f509000-0x000000007f551fff] [ 0.024372] node 0: [mem 0x000000007f555000-0x000000007f5bafff] [ 0.024373] node 0: [mem 0x000000007f5bf000-0x000000007f677fff] [ 0.024420] Zeroed struct page in unavailable ranges: 2556 pages [ 0.024422] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f677fff] [ 0.024424] On node 0 totalpages: 521732 [ 0.024425] DMA zone: 64 pages used for memmap [ 0.024426] DMA zone: 21 pages reserved [ 0.024427] DMA zone: 3998 pages, LIFO batch:0 [ 0.024487] DMA32 zone: 8090 pages used for memmap [ 0.024488] DMA32 zone: 517734 pages, LIFO batch:63 [ 0.044784] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff] [ 0.045245] ACPI: PM-Timer IO Port: 0x408 [ 0.045249] ACPI: Local APIC address 0xfee00000 [ 0.045265] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.045267] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.045282] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.045285] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.045288] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.045290] ACPI: IRQ0 used by override. [ 0.045292] ACPI: IRQ9 used by override. [ 0.045295] Using ACPI (MADT) for SMP configuration information [ 0.045297] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.045306] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.045337] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.045340] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.045341] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.045342] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.045344] PM: hibernation: Registered nosave memory: [mem 0x7f4fe000-0x7f508fff] [ 0.045346] PM: hibernation: Registered nosave memory: [mem 0x7f552000-0x7f554fff] [ 0.045348] PM: hibernation: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff] [ 0.045352] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.045353] Booting paravirtualized kernel on bare hardware [ 0.045359] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.045373] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.046694] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576 [ 0.046704] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152 [ 0.046706] pcpu-alloc: [0] 0 1 [ 0.046758] Built 1 zonelists, mobility grouping on. Total pages: 513557 [ 0.046759] Policy zone: DMA32 [ 0.046762] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/boot/ostree/eos-HASH_643-5CE4-59F3-F243-EFE030E12D92/vmlinuz-5.8.0-14-generic root=UUID=HASH_C13-061B-1CFA-7A79-A229A0DB460B rw splash plymouth.ignore-serial-consoles quiet loglevel=0 ostree=/ostree/boot.0/eos/HASH_643-5CE4-59F3-F243-EFE030E12D92/0 [ 0.047933] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.048434] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.048495] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.069385] Memory: 1962512K/2086928K available (14339K kernel code, 2523K rwdata, 8916K rodata, 2628K init, 4948K bss, 124416K reserved, 0K cma-reserved) [ 0.069399] random: get_random_u64 called from __kmem_cache_create+0x42/0x530 with crng_init=0 [ 0.069667] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.069696] Kernel/User page tables isolation: enabled [ 0.069731] ftrace: allocating 45801 entries in 179 pages [ 0.094236] ftrace: allocated 179 pages with 5 groups [ 0.094494] rcu: Hierarchical RCU implementation. [ 0.094497] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.094498] Trampoline variant of Tasks RCU enabled. [ 0.094499] Rude variant of Tasks RCU enabled. [ 0.094500] Tracing variant of Tasks RCU enabled. [ 0.094501] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.094502] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.100127] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.102313] Console: colour VGA+ 80x25 [ 0.102320] printk: console [tty0] enabled [ 0.102352] ACPI: Core revision 20200528 [ 0.102477] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.102494] APIC: Switch to symmetric I/O mode setup [ 0.102938] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122495] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3982fec13a7, max_idle_ns: 881590569786 ns [ 0.122501] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.87 BogoMIPS (lpj=7979748) [ 0.122504] pid_max: default: 32768 minimum: 301 [ 0.122553] LSM: Security Framework initializing [ 0.122567] Yama: becoming mindful. [ 0.122613] AppArmor: AppArmor initialized [ 0.122673] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.122688] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.123093] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.123110] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.123114] process: using mwait in idle threads [ 0.123119] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.123120] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.123124] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123127] Spectre V2 : Mitigation: Full generic retpoline [ 0.123128] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123129] Speculative Store Bypass: Vulnerable [ 0.123133] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.123378] Freeing SMP alternatives memory: 40K [ 0.235958] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xa) [ 0.236180] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.236187] core: PEBS disabled due to CPU errata [ 0.236189] ... version: 2 [ 0.236190] ... bit width: 40 [ 0.236191] ... generic registers: 2 [ 0.236193] ... value mask: 000000ffffffffff [ 0.236194] ... max period: 000000007fffffff [ 0.236195] ... fixed-purpose events: 3 [ 0.236196] ... event mask: 0000000700000003 [ 0.236263] rcu: Hierarchical SRCU implementation. [ 0.237588] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.237657] smp: Bringing up secondary CPUs ... [ 0.237912] x86: Booting SMP configuration: [ 0.237913] .... node #0, CPUs: #1 [ 0.240842] smp: Brought up 1 node, 2 CPUs [ 0.240842] smpboot: Max logical packages: 1 [ 0.240842] smpboot: Total of 2 processors activated (7979.74 BogoMIPS) [ 0.242801] devtmpfs: initialized [ 0.242801] x86/mm: Memory block size: 128MB [ 0.243123] PM: Registering ACPI NVS region [mem 0x7f678000-0x7f6befff] (290816 bytes) [ 0.243123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.243123] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.243123] pinctrl core: initialized pinctrl subsystem [ 0.243123] PM: RTC time: 19:57:25, date: 2024-04-13 [ 0.243123] thermal_sys: Registered thermal governor 'fair_share' [ 0.243123] thermal_sys: Registered thermal governor 'bang_bang' [ 0.243123] thermal_sys: Registered thermal governor 'step_wise' [ 0.243123] thermal_sys: Registered thermal governor 'user_space' [ 0.243123] thermal_sys: Registered thermal governor 'power_allocator' [ 0.243123] NET: Registered protocol family 16 [ 0.243123] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.243123] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.243123] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.243123] EISA bus registered [ 0.243123] cpuidle: using governor ladder [ 0.243123] cpuidle: using governor menu [ 0.243123] ACPI: bus type PCI registered [ 0.243123] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.243123] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.243123] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.243123] PCI: Using configuration type 1 for base access [ 0.248834] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.250685] ACPI: Added _OSI(Module Device) [ 0.250686] ACPI: Added _OSI(Processor Device) [ 0.250688] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.250689] ACPI: Added _OSI(Processor Aggregator Device) [ 0.250690] ACPI: Added _OSI(Linux-Dell-Video) [ 0.250692] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.250693] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.259956] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.261434] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.261971] ACPI: Dynamic OEM Table Load: [ 0.261979] ACPI: SSDT 0xFFFF8C1B7C112800 00026E (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.263093] ACPI: Dynamic OEM Table Load: [ 0.263101] ACPI: SSDT 0xFFFF8C1B7C009800 0005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.264525] ACPI: Dynamic OEM Table Load: [ 0.264531] ACPI: SSDT 0xFFFF8C1B7CBB3C00 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.265371] ACPI: Dynamic OEM Table Load: [ 0.265376] ACPI: SSDT 0xFFFF8C1B7C068C00 000083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.266564] ACPI: EC: EC started [ 0.266565] ACPI: EC: interrupt blocked [ 0.294636] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.294639] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions [ 0.294640] ACPI: Interpreter enabled [ 0.294669] ACPI: (supports S0 S3 S4 S5) [ 0.294671] ACPI: Using IOAPIC for interrupt routing [ 0.294711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.295087] ACPI: Enabled 13 GPEs in block 00 to 1F [ 0.305340] ACPI: Power Resource [FN00] (on) [ 0.306403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.306411] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.306418] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200528/nsarguments-164) [ 0.306535] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM [ 0.307530] PCI host bridge to bus 0000:00 [ 0.307533] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.307536] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.307541] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.307543] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.307545] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.307562] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.307729] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 0.307746] pci 0000:00:02.0: reg 0x10: [mem 0x94000000-0x940fffff 64bit] [ 0.307754] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.307761] pci 0000:00:02.0: reg 0x20: [io 0x5110-0x5117] [ 0.307936] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 0.307949] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 0.308147] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.308212] pci 0000:00:1a.0: reg 0x20: [io 0x50c0-0x50df] [ 0.308407] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.308472] pci 0000:00:1a.1: reg 0x20: [io 0x50a0-0x50bf] [ 0.308666] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.308695] pci 0000:00:1a.7: reg 0x10: [mem 0x98404c00-0x98404fff] [ 0.308805] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.308973] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.309007] pci 0000:00:1b.0: reg 0x10: [mem 0x98400000-0x98403fff 64bit] [ 0.309134] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.309317] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.309463] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.309653] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.309798] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.309985] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.310130] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.310320] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 [ 0.310465] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.310669] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.310734] pci 0000:00:1d.0: reg 0x20: [io 0x5080-0x509f] [ 0.310932] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.310997] pci 0000:00:1d.1: reg 0x20: [io 0x5060-0x507f] [ 0.311178] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.311243] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f] [ 0.311436] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.311465] pci 0000:00:1d.7: reg 0x10: [mem 0x98404800-0x98404bff] [ 0.311574] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.311736] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.311980] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.312108] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.312114] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.312120] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003) [ 0.312124] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) [ 0.312310] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.312333] pci 0000:00:1f.1: reg 0x10: [io 0x5108-0x510f] [ 0.312346] pci 0000:00:1f.1: reg 0x14: [io 0x5124-0x5127] [ 0.312358] pci 0000:00:1f.1: reg 0x18: [io 0x5100-0x5107] [ 0.312370] pci 0000:00:1f.1: reg 0x1c: [io 0x5120-0x5123] [ 0.312382] pci 0000:00:1f.1: reg 0x20: [io 0x50e0-0x50ef] [ 0.312408] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.312410] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.312412] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.312414] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.312572] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.312602] pci 0000:00:1f.2: reg 0x10: [io 0x50f8-0x50ff] [ 0.312614] pci 0000:00:1f.2: reg 0x14: [io 0x511c-0x511f] [ 0.312626] pci 0000:00:1f.2: reg 0x18: [io 0x50f0-0x50f7] [ 0.312638] pci 0000:00:1f.2: reg 0x1c: [io 0x5118-0x511b] [ 0.312650] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] [ 0.312662] pci 0000:00:1f.2: reg 0x24: [mem 0x98404000-0x984047ff] [ 0.312728] pci 0000:00:1f.2: PME# supported from D3hot [ 0.312891] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.312915] pci 0000:00:1f.3: reg 0x10: [mem 0x98405000-0x984050ff] [ 0.312958] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] [ 0.313232] acpiphp: Slot [1] registered [ 0.313240] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.313245] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.313250] pci 0000:00:1c.0: bridge window [mem 0x97400000-0x983fffff] [ 0.313258] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.313340] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.313345] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.313349] pci 0000:00:1c.1: bridge window [mem 0x96400000-0x973fffff] [ 0.313357] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.313530] pci 0000:05:00.0: [14e4:1693] type 00 class 0x020000 [ 0.313634] pci 0000:05:00.0: reg 0x10: [mem 0x95300000-0x9530ffff 64bit] [ 0.313812] pci 0000:05:00.0: enabling Extended Tags [ 0.314076] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.314487] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.314492] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.314501] pci 0000:00:1c.2: bridge window [mem 0x95300000-0x963fffff] [ 0.314509] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref] [ 0.314653] pci 0000:06:00.0: [8086:4222] type 00 class 0x028000 [ 0.314753] pci 0000:06:00.0: reg 0x10: [mem 0x94200000-0x94200fff] [ 0.315222] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.315479] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.315509] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 0.315514] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.315519] pci 0000:00:1c.3: bridge window [mem 0x94200000-0x952fffff] [ 0.315527] pci 0000:00:1c.3: bridge window [mem 0x93000000-0x93ffffff 64bit pref] [ 0.315555] pci_bus 0000:07: extended config space not accessible [ 0.315612] pci 0000:07:00.0: [1180:0832] type 00 class 0x0c0010 [ 0.315622] pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via FireWire function) [ 0.315624] pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller [ 0.315646] pci 0000:07:00.0: reg 0x10: [mem 0x94100000-0x941007ff] [ 0.315755] pci 0000:07:00.0: supports D1 D2 [ 0.315757] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.315860] pci 0000:07:00.1: [1180:0822] type 00 class 0x080500 [ 0.315882] pci 0000:07:00.1: reg 0x10: [mem 0x94100b00-0x94100bff] [ 0.315991] pci 0000:07:00.1: supports D1 D2 [ 0.315993] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316069] pci 0000:07:00.2: [1180:0592] type 00 class 0x088000 [ 0.316093] pci 0000:07:00.2: reg 0x10: [mem 0x94100900-0x941009ff] [ 0.316202] pci 0000:07:00.2: supports D1 D2 [ 0.316204] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316280] pci 0000:07:00.3: [1180:0852] type 00 class 0x088000 [ 0.316303] pci 0000:07:00.3: reg 0x10: [mem 0x94100800-0x941008ff] [ 0.316412] pci 0000:07:00.3: supports D1 D2 [ 0.316414] pci 0000:07:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316560] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.316572] pci 0000:00:1e.0: bridge window [mem 0x94100000-0x941fffff] [ 0.316586] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.316588] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.316590] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.316592] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.316850] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.316989] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.317126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.317263] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.317399] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.317537] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.317674] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.317810] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.351241] ACPI: EC: interrupt unblocked [ 0.351242] ACPI: EC: event unblocked [ 0.351249] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.351250] ACPI: EC: GPE=0x1c [ 0.351253] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete [ 0.351256] ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events [ 0.351403] iommu: Default domain type: Translated [ 0.351726] SCSI subsystem initialized [ 0.351782] libata version 3.00 loaded. [ 0.351806] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.351806] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.351806] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.351806] vgaarb: loaded [ 0.351806] ACPI: bus type USB registered [ 0.351806] usbcore: registered new interface driver usbfs [ 0.351806] usbcore: registered new interface driver hub [ 0.351806] usbcore: registered new device driver usb [ 0.351806] pps_core: LinuxPPS API ver. 1 registered [ 0.351806] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.351806] PTP clock support registered [ 0.351806] EDAC MC: Ver: 3.0.0 [ 0.351806] NetLabel: Initializing [ 0.351806] NetLabel: domain hash size = 128 [ 0.351806] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.351806] NetLabel: unlabeled traffic allowed by default [ 0.351806] PCI: Using ACPI for IRQ routing [ 0.363889] PCI: pci_cache_line_size set to 64 bytes [ 0.364066] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.364068] e820: reserve RAM buffer [mem 0x7f4fe000-0x7fffffff] [ 0.364070] e820: reserve RAM buffer [mem 0x7f552000-0x7fffffff] [ 0.364071] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff] [ 0.364073] e820: reserve RAM buffer [mem 0x7f678000-0x7fffffff] [ 0.364079] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.364079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.364079] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.366503] clocksource: Switched to clocksource tsc-early [ 0.396439] VFS: Disk quotas dquot_6.6.0 [ 0.396468] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.396689] AppArmor: AppArmor Filesystem Enabled [ 0.396743] pnp: PnP ACPI init [ 0.397212] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff] [ 0.397308] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.397310] system 00:00: [io 0x0610] has been reserved [ 0.397312] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.397315] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.397317] system 00:00: [io 0x0500-0x053f] has been reserved [ 0.397319] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.397322] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.397325] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.397327] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.397329] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.397332] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.397334] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.397337] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.397339] system 00:00: [mem 0x32000000-0x320000ff] could not be reserved [ 0.397348] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.397418] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.397543] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.397642] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.428147] pnp 00:04: Plug and Play ACPI device, IDs ENE0100 (active) [ 0.428167] pnp: PnP ACPI: found 5 devices [ 0.435127] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.435233] NET: Registered protocol family 2 [ 0.435558] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.435608] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.435719] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.435765] TCP: Hash tables configured (established 16384 bind 16384) [ 0.435929] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.435951] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.436017] NET: Registered protocol family 1 [ 0.436025] NET: Registered protocol family 44 [ 0.436061] pci 0000:00:02.1: BAR 0: assigned [mem 0x98500000-0x985fffff 64bit] [ 0.436070] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.436074] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.436081] pci 0000:00:1c.0: bridge window [mem 0x97400000-0x983fffff] [ 0.436086] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.436094] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.436097] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.436104] pci 0000:00:1c.1: bridge window [mem 0x96400000-0x973fffff] [ 0.436109] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.436117] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.436121] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.436127] pci 0000:00:1c.2: bridge window [mem 0x95300000-0x963fffff] [ 0.436132] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref] [ 0.436140] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 0.436143] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.436149] pci 0000:00:1c.3: bridge window [mem 0x94200000-0x952fffff] [ 0.436154] pci 0000:00:1c.3: bridge window [mem 0x93000000-0x93ffffff 64bit pref] [ 0.436163] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.436169] pci 0000:00:1e.0: bridge window [mem 0x94100000-0x941fffff] [ 0.436181] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.436183] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.436185] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.436187] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.436189] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.436191] pci_bus 0000:02: resource 1 [mem 0x97400000-0x983fffff] [ 0.436193] pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 0.436195] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.436197] pci_bus 0000:04: resource 1 [mem 0x96400000-0x973fffff] [ 0.436199] pci_bus 0000:04: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 0.436201] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.436203] pci_bus 0000:05: resource 1 [mem 0x95300000-0x963fffff] [ 0.436205] pci_bus 0000:05: resource 2 [mem 0x92000000-0x92ffffff 64bit pref] [ 0.436207] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.436209] pci_bus 0000:06: resource 1 [mem 0x94200000-0x952fffff] [ 0.436211] pci_bus 0000:06: resource 2 [mem 0x93000000-0x93ffffff 64bit pref] [ 0.436213] pci_bus 0000:07: resource 1 [mem 0x94100000-0x941fffff] [ 0.436215] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.436216] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.436218] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.436220] pci_bus 0000:07: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.436388] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.439465] PCI: CLS 0 bytes, default 64 [ 0.439545] Trying to unpack rootfs image as initramfs... [ 1.624085] Freeing initrd memory: 50904K [ 1.624456] check: Scanning for low memory corruption every 60 seconds [ 1.625080] Initialise system trusted keyrings [ 1.625095] Key type blacklist registered [ 1.625204] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.627903] zbud: loaded [ 1.628403] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.628734] fuse: init (API version 7.31) [ 1.628911] integrity: Platform Keyring initialized [ 1.642941] Key type asymmetric registered [ 1.642943] Asymmetric key parser 'x509' registered [ 1.642958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.643025] io scheduler mq-deadline registered [ 1.644670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.644784] intel_idle: MWAIT substates: 0x22220 [ 1.644960] Monitor-Mwait will be used to enter C-1 state [ 1.644967] Monitor-Mwait will be used to enter C-2 state [ 1.644971] Monitor-Mwait will be used to enter C-3 state [ 1.644977] ACPI: \_PR_.CPU0: Found 3 idle states [ 1.644978] intel_idle: v0.5.1 model 0xF [ 1.645091] intel_idle: Local APIC timer is reliable in C1 [ 1.647127] ACPI: AC Adapter [AC] (on-line) [ 1.647224] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 1.647253] ACPI: Power Button [PWRB] [ 1.647313] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 1.647337] ACPI: Lid Switch [LID0] [ 1.647392] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2 [ 1.647417] ACPI: Sleep Button [SLPB] [ 1.647499] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.647548] ACPI: Power Button [PWRF] [ 1.652201] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.652204] ACPI: Thermal Zone [THRM] (0 C) [ 1.652501] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.656105] Linux agpgart interface v0.103 [ 1.659528] loop: module loaded [ 1.659876] ata_piix 0000:00:1f.1: version 2.13 [ 1.661183] scsi host0: ata_piix [ 1.661396] scsi host1: ata_piix [ 1.661454] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14 [ 1.661456] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15 [ 1.661897] libphy: Fixed MDIO Bus: probed [ 1.661899] tun: Universal TUN/TAP device driver, 1.6 [ 1.661955] PPP generic driver version 2.4.2 [ 1.662057] VFIO - User Level meta-driver version: 0.3 [ 1.662140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.662145] ehci-pci: EHCI PCI platform driver [ 1.662397] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.662407] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.662422] ehci-pci 0000:00:1a.7: debug port 1 [ 1.666351] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.666396] ehci-pci 0000:00:1a.7: irq 18, io mem 0x98404c00 [ 1.678527] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.678624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.678628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.678632] usb usb1: Product: EHCI Host Controller [ 1.678635] usb usb1: Manufacturer: Linux 5.8.0-14-generic ehci_hcd [ 1.678638] usb usb1: SerialNumber: ... [ 1.678867] hub 1-0:1.0: USB hub found [ 1.678878] hub 1-0:1.0: 4 ports detected [ 1.679342] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.679348] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.679362] ehci-pci 0000:00:1d.7: debug port 1 [ 1.683269] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.683284] ehci-pci 0000:00:1d.7: irq 23, io mem 0x98404800 [ 1.698543] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.698635] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.698639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.698642] usb usb2: Product: EHCI Host Controller [ 1.698645] usb usb2: Manufacturer: Linux 5.8.0-14-generic ehci_hcd [ 1.698648] usb usb2: SerialNumber: ... [ 1.698840] hub 2-0:1.0: USB hub found [ 1.698849] hub 2-0:1.0: 6 ports detected [ 1.699147] ehci-platform: EHCI generic platform driver [ 1.699166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.699176] ohci-pci: OHCI PCI platform driver [ 1.699192] ohci-platform: OHCI generic platform driver [ 1.699203] uhci_hcd: USB Universal Host Controller Interface driver [ 1.699448] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.699455] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.699463] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.699496] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0 [ 1.699577] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 1.699579] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.699581] usb usb3: Product: UHCI Host Controller [ 1.699583] usb usb3: Manufacturer: Linux 5.8.0-14-generic uhci_hcd [ 1.699585] usb usb3: SerialNumber: ... [ 1.699733] hub 3-0:1.0: USB hub found [ 1.699743] hub 3-0:1.0: 2 ports detected [ 1.700119] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.700128] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.700135] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.700166] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0 [ 1.700235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 1.700237] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.700239] usb usb4: Product: UHCI Host Controller [ 1.700241] usb usb4: Manufacturer: Linux 5.8.0-14-generic uhci_hcd [ 1.700243] usb usb4: SerialNumber: ... [ 1.700402] hub 4-0:1.0: USB hub found [ 1.700411] hub 4-0:1.0: 2 ports detected [ 1.700782] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.700789] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.700796] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.700819] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080 [ 1.700885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 1.700887] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.700889] usb usb5: Product: UHCI Host Controller [ 1.700891] usb usb5: Manufacturer: Linux 5.8.0-14-generic uhci_hcd [ 1.700893] usb usb5: SerialNumber: ... [ 1.701037] hub 5-0:1.0: USB hub found [ 1.701046] hub 5-0:1.0: 2 ports detected [ 1.701407] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.701413] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.701421] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.701454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060 [ 1.701521] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 1.701523] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.701525] usb usb6: Product: UHCI Host Controller [ 1.701527] usb usb6: Manufacturer: Linux 5.8.0-14-generic uhci_hcd [ 1.701529] usb usb6: SerialNumber: ... [ 1.701672] hub 6-0:1.0: USB hub found [ 1.701682] hub 6-0:1.0: 2 ports detected [ 1.702054] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.702060] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.702067] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.702089] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 1.702169] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 1.702171] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.702173] usb usb7: Product: UHCI Host Controller [ 1.702175] usb usb7: Manufacturer: Linux 5.8.0-14-generic uhci_hcd [ 1.702177] usb usb7: SerialNumber: ... [ 1.702319] hub 7-0:1.0: USB hub found [ 1.702328] hub 7-0:1.0: 2 ports detected [ 1.702566] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.745568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.745574] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.745762] mousedev: PS/2 mouse device common for all mice [ 1.747953] rtc_cmos 00:01: RTC can wake from S4 [ 1.748215] rtc_cmos 00:01: registered as rtc0 [ 1.748251] rtc_cmos 00:01: setting system clock to 2024-04-13T19:57:26 UTC (1713038246) [ 1.748277] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.748286] i2c /dev entries driver [ 1.748367] device-mapper: uevent: version 1.0.3 [ 1.748463] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 1.748496] platform eisa.0: Probing EISA bus 0 [ 1.748515] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.748517] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.748519] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.748521] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.748522] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.748524] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.748526] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.748528] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.748530] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.748532] platform eisa.0: EISA: Detected 0 cards [ 1.748536] intel_pstate: CPU model not supported [ 1.748573] ledtrig-cpu: registered to indicate activity on CPUs [ 1.748714] drop_monitor: Initializing network drop monitor service [ 1.749008] NET: Registered protocol family 10 [ 1.774422] Segment Routing with IPv6 [ 1.774469] NET: Registered protocol family 17 [ 1.774540] Key type dns_resolver registered [ 1.774881] microcode: sig=0x6fa, pf=0x80, revision=0x95 [ 1.774937] microcode: Microcode Update Driver: v2.2. [ 1.774943] IPI shorthand broadcast: enabled [ 1.774959] sched_clock: Marking stable (1772803393, 2126308)->(1821387182, -46457481) [ 1.775058] registered taskstats version 1 [ 1.775082] Loading compiled-in X.509 certificates [ 1.776501] Loaded X.509 cert 'Build time autogenerated kernel key: ca74c8e992779b4b3885543ae540357d26d5d953' [ 1.776527] Loaded X.509 cert 'EOS Driver Signing 2020: 86f6286ded127b8d05580469bd7870dce992f8a6' [ 1.776567] zswap: loaded using pool lzo/zbud [ 1.776730] Key type ._fscrypt registered [ 1.776731] Key type .fscrypt registered [ 1.776732] Key type fscrypt-provisioning registered [ 1.780696] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.789044] Key type encrypted registered [ 1.789048] AppArmor: AppArmor sha1 policy hashing enabled [ 1.789057] ima: No TPM chip found, activating TPM-bypass! [ 1.789063] ima: Allocated hash algorithm: sha1 [ 1.789072] ima: No architecture policies found [ 1.789090] evm: Initialising EVM extended attributes: [ 1.789091] evm: security.selinux [ 1.789092] evm: security.SMACK64 [ 1.789093] evm: security.SMACK64EXEC [ 1.789094] evm: security.SMACK64TRANSMUTE [ 1.789094] evm: security.SMACK64MMAP [ 1.789095] evm: security.apparmor [ 1.789096] evm: security.ima [ 1.789097] evm: security.capability [ 1.789098] evm: HMAC attrs: 0x1 [ 1.789678] PM: Magic number: 4:423:1001 [ 1.789740] i8042 aux 00:03: hash matches [ 1.790336] RAS: Correctable Errors collector initialized. [ 1.850867] ata1.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 [ 1.855339] random: fast init done [ 2.030720] battery: ACPI: Battery Slot [BAT0] (battery present) [ 2.031814] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 [ 2.038545] usb 2-4: new high-speed USB device number 2 using ehci-pci [ 2.061766] sr 0:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.061769] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.062137] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.062215] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.065060] Freeing unused decrypted memory: 2040K [ 2.066430] Freeing unused kernel image (initmem) memory: 2628K [ 2.074523] Write protecting the kernel read-only data: 26624k [ 2.076124] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 2.077044] Freeing unused kernel image (rodata/data gap) memory: 1324K [ 2.139780] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.139808] x86/mm: Checking user space page tables [ 2.150523] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large: [ 2.150525] clocksource: 'hpet' wd_now: 3e04104 wd_last: 159ba25 mask: ffffffff [ 2.150527] clocksource: 'tsc-early' cs_now: aba827804 cs_last: a7da07832 mask: ffffffffffffffff [ 2.150531] tsc: Marking TSC unstable due to clocksource watchdog [ 2.150539] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.150541] sched_clock: Marking unstable (2148412437, 2126308)<-(2196996211, -46457481) [ 2.206578] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.206613] clocksource: Switched to clocksource hpet [ 2.206615] Run /init as init process [ 2.206619] with arguments: [ 2.206620] /init [ 2.206622] splash [ 2.206623] with environment: [ 2.206624] HOME=/ [ 2.206625] TERM=linux [ 2.206627] BOOT_IMAGE=(hd0,msdos2)/boot/ostree/eos-HASH_643-5CE4-59F3-F243-EFE030E12D92/vmlinuz-5.8.0-14-generic [ 2.206628] ostree=/ostree/boot.0/eos/HASH_643-5CE4-59F3-F243-EFE030E12D92/0 [ 2.228351] systemd[1]: systemd 246.4+dev62.3a0269d-21beos3.9.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.243497] usb 2-4: New USB device found, idVendor=064e, idProduct=a101, bcdDevice= 1.00 [ 2.243501] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 2.243505] usb 2-4: Product: Acer CrystalEye webcam [ 2.243508] usb 2-4: Manufacturer: SuYin [ 2.243511] usb 2-4: SerialNumber: ... [ 2.246707] systemd[1]: Detected architecture x86-64. [ 2.246718] systemd[1]: Running in initial RAM disk. [ 2.263363] systemd[1]: No hostname configured. [ 2.263373] systemd[1]: Set hostname to ... [ 2.263422] systemd[1]: Initializing machine ID from random generator. [ 2.337426] systemd[1]: /lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 2.337992] systemd[1]: /lib/systemd/system/eos-install-custom-boot-splash.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.338008] systemd[1]: /lib/systemd/system/eos-install-custom-boot-splash.service:14: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.346194] systemd[1]: /lib/systemd/system/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.346208] systemd[1]: /lib/systemd/system/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.346831] systemd[1]: /lib/systemd/system/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.346845] systemd[1]: /lib/systemd/system/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.347505] systemd[1]: /lib/systemd/system/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.347519] systemd[1]: /lib/systemd/system/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.349304] systemd[1]: /lib/systemd/system/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.349318] systemd[1]: /lib/systemd/system/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.349864] systemd[1]: /lib/systemd/system/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.349877] systemd[1]: /lib/systemd/system/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.350312] systemd[1]: /lib/systemd/system/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.350326] systemd[1]: /lib/systemd/system/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.350813] systemd[1]: /lib/systemd/system/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.350828] systemd[1]: /lib/systemd/system/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.354698] systemd[1]: /lib/systemd/system/ostree-prepare-root.service:32: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.354712] systemd[1]: /lib/systemd/system/ostree-prepare-root.service:33: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 2.356614] systemd[1]: Queued start job for default target Initrd Default Target. [ 2.356846] systemd[1]: Reached target Local File Systems. [ 2.356953] systemd[1]: Reached target Slices. [ 2.356999] systemd[1]: Reached target Swap. [ 2.357038] systemd[1]: Reached target Timers. [ 2.357290] systemd[1]: Listening on Journal Audit Socket. [ 2.357469] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.357650] systemd[1]: Listening on Journal Socket. [ 2.357860] systemd[1]: Listening on udev Control Socket. [ 2.358027] systemd[1]: Listening on udev Kernel Socket. [ 2.358066] systemd[1]: Reached target Sockets. [ 2.358161] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped. [ 2.358304] systemd[1]: Condition check resulted in dracut cmdline hook being skipped. [ 2.358501] systemd[1]: Condition check resulted in dracut pre-udev hook being skipped. [ 2.358559] systemd[1]: Condition check resulted in Install custom splash theme to runtime dir being skipped. [ 2.360753] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 2.363438] systemd[1]: Starting Journal Service... [ 2.365268] systemd[1]: Starting Load Kernel Modules... [ 2.366809] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 2.368786] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.394582] systemd[1]: Finished Create Static Device Nodes in /dev. [ 2.397272] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 2.425339] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 2.425614] systemd[1]: Condition check resulted in dracut pre-trigger hook being skipped. [ 2.427420] systemd[1]: Starting Coldplug All udev Devices... [ 2.448211] systemd[1]: Finished Load Kernel Modules. [ 2.450001] systemd[1]: Starting Apply Kernel Variables... [ 2.469743] Unsafe core_pattern used with fs.suid_dumpable=2. Pipe handler or fully qualified core dump path required. Set kernel.core_pattern before fs.suid_dumpable. [ 2.469771] Unsafe core_pattern used with fs.suid_dumpable=2. Pipe handler or fully qualified core dump path required. Set kernel.core_pattern before fs.suid_dumpable. [ 2.471640] systemd[1]: Finished Apply Kernel Variables. [ 2.611760] systemd[1]: Started Journal Service. [ 2.735235] sdhci: Secure Digital Host Controller Interface driver [ 2.735238] sdhci: Copyright(c) Pierre Ossman [ 2.745252] sdhci-pci 0000:07:00.1: SDHCI controller found [1180:0822] (rev 22) [ 2.745438] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.745485] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.765061] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.766732] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.766752] mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA [ 2.773210] ahci 0000:00:1f.2: version 3.0 [ 2.773587] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode [ 2.773590] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 2.790144] pci 0000:00:00.0: Intel 965GM Chipset [ 2.790168] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 2.791163] pci 0000:00:00.0: detected 8192K stolen memory [ 2.793097] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.793640] Console: switching to colour dummy device 80x25 [ 2.802133] scsi host2: ahci [ 2.802367] scsi host3: ahci [ 2.805887] scsi host4: ahci [ 2.805992] ata3: SATA max UDMA/133 abar m2048@0x98404000 port 0x98404100 irq 28 [ 2.805996] ata4: SATA max UDMA/133 abar m2048@0x98404000 port 0x98404180 irq 28 [ 2.805997] ata5: DUMMY [ 2.845039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.845792] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.858752] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 2.886480] i915 0000:00:02.0: [drm] Initialized overlay support. [ 2.889455] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 2.890434] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 3.110632] acpi device:3a: registered as cooling_device3 [ 3.110800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 3.121404] ata4: SATA link down (SStatus 0 SControl 300) [ 3.301799] fbcon: i915drmfb (fb0) is primary device [ 3.370670] firewire_core 0000:07:00.0: created device fw0: GUID b640ae3300023f76, S400 [ 3.418567] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.419684] ata3.00: ACPI cmd ef/XXX (SET FEATURES) filtered out [ 3.420057] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100 [ 3.420060] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.421482] ata3.00: ACPI cmd 00/XXX (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.421838] ata3.00: configured for UDMA/100 [ 3.422039] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 C70P PQ: 0 ANSI: 5 [ 3.422344] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.422419] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.422442] sd 2:0:0:0: [sda] Write Protect is off [ 3.422445] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.422495] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.855408] sda: sda1 sda2 [ 3.856066] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.974790] Console: switching to colour frame buffer device 160x50 [ 3.993760] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 6.636107] random: crng init done [ 8.046405] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 11.343041] systemd[1]: systemd 246.4+dev62.3a0269d-21beos3.9.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 11.362741] systemd[1]: Detected architecture x86-64. [ 11.395595] systemd[1]: Set hostname to ... [ 18.583857] systemd[1]: /lib/systemd/system/ostree-remount.service:38: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 18.583873] systemd[1]: /lib/systemd/system/ostree-remount.service:39: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 18.749850] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 20.120655] systemd[1]: /lib/systemd/system/eos-license-service.service:7: Special user nobody configured, this is not safe! [ 20.385296] systemd[1]: /lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 20.859472] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 20.859487] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 20.943024] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 20.943039] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 20.952306] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 20.952320] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 20.968732] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 20.968746] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 20.994655] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 20.994670] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 21.005999] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 21.006014] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 21.020000] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 21.020014] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 21.163398] systemd[1]: /lib/systemd/system/ostree-prepare-root.service:32: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 21.163414] systemd[1]: /lib/systemd/system/ostree-prepare-root.service:33: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether. [ 21.206283] systemd[1]: initrd-switch-root.service: Succeeded. [ 21.206976] systemd[1]: Stopped Switch Root. [ 21.207547] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 21.208011] systemd[1]: Created slice system-getty.slice. [ 21.208438] systemd[1]: Created slice system-modprobe.slice. [ 21.208837] systemd[1]: Created slice User and Session Slice. [ 21.208915] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 21.209029] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 21.209383] systemd[1]: Set up automount ... [ 21.209470] systemd[1]: Reached target Local Encrypted Volumes. [ 21.209551] systemd[1]: Reached target endless-extra SD card mounted (if expected). [ 21.209641] systemd[1]: Stopped target Switch Root. [ 21.209714] systemd[1]: Stopped target Initrd File Systems. [ 21.209766] systemd[1]: Stopped target Initrd Root File System. [ 21.209866] systemd[1]: Reached target User and Group Name Lookups. [ 21.209938] systemd[1]: Reached target Remote Encrypted Volumes. [ 21.210005] systemd[1]: Reached target Remote File Systems. [ 21.210075] systemd[1]: Reached target Slices. [ 21.210159] systemd[1]: Reached target Swap. [ 21.230143] systemd[1]: Listening on Process Core Dump Socket. [ 21.230318] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 21.230604] systemd[1]: Listening on udev Control Socket. [ 21.230823] systemd[1]: Listening on udev Kernel Socket. [ 21.232519] systemd[1]: Mounting Huge Pages File System... [ 21.234525] systemd[1]: Mounting POSIX Message Queue File System... [ 21.236505] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 21.238677] systemd[1]: Mounting Kernel Debug File System... [ 21.240895] systemd[1]: Mounting Kernel Trace File System... [ 21.261036] systemd[1]: Mounting Temporary Directory (/tmp)... [ 21.290292] systemd[1]: Starting Restore the current clock... [ 21.344651] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 21.344949] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 21.345355] systemd[1]: ostree-prepare-root.service: Succeeded. [ 21.346145] systemd[1]: Stopped OSTree Prepare OS/. [ 21.346808] systemd[1]: systemd-fsck-root.service: Succeeded. [ 21.347583] systemd[1]: Stopped File System Check on Root Device. [ 21.347864] systemd[1]: Stopped Journal Service. [ 21.351030] systemd[1]: Starting Journal Service... [ 21.353008] systemd[1]: Starting Remount Root and Kernel File Systems... [ 21.355003] systemd[1]: Starting Coldplug All udev Devices... [ 21.360056] systemd[1]: sysroot-usr.mount: Succeeded. [ 21.363931] systemd[1]: sysroot-sysroot.mount: Succeeded. [ 21.364346] systemd[1]: sysroot-boot.mount: Succeeded. [ 21.365589] systemd[1]: Mounted Huge Pages File System. [ 21.366045] systemd[1]: Mounted POSIX Message Queue File System. [ 21.366345] systemd[1]: Mounted Kernel Debug File System. [ 21.367014] systemd[1]: Mounted Kernel Trace File System. [ 21.367314] systemd[1]: Mounted Temporary Directory (/tmp). [ 21.397753] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 21.461660] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 21.464711] systemd[1]: Finished Remount Root and Kernel File Systems. [ 21.466721] systemd[1]: Starting OSTree Remount OS/ Bind Mounts... [ 21.467007] systemd[1]: Condition check resulted in Create System Users being skipped. [ 21.468700] systemd[1]: Starting Create Static Device Nodes in /dev... [ 21.519849] systemd[1]: fake-hwclock-restore.service: Succeeded. [ 21.520595] systemd[1]: Finished Restore the current clock. [ 21.572907] systemd[1]: Started Journal Service. [ 33.348528] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0 [ 33.348530] ene_ir: PLL freq = 1406 [ 33.348531] ene_ir: KB3926B detected [ 33.382575] Registered IR keymap rc-rc6-mce [ 33.392204] IR RC6 protocol handler initialized [ 33.422575] rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0 [ 33.422644] rc rc0: lirc_dev: driver ene_ir registered at minor = 0, raw IR receiver, no transmitter [ 33.422704] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7 [ 33.426257] rc rc0: nonsensical timing event of duration 0 [ 33.426259] rc rc0: two consecutive events of type space [ 33.426285] ene_ir: driver has been successfully loaded [ 33.682170] io scheduler bfq registered [ 34.206767] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20200528/utaddress-213) [ 34.206776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.206780] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20200528/utaddress-213) [ 34.206784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.206786] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20200528/utaddress-213) [ 34.206790] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.206791] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 34.774277] intel_powerclamp: No package C-state available [ 34.802986] intel_powerclamp: No package C-state available [ 35.219573] zram: Added device: zram0 [ 35.231223] zram0: detected capacity change from 0 to 3105013760 [ 35.548023] acer_wmi: Acer Laptop ACPI-WMI Extras [ 35.552335] acer_wmi: Function bitmap for Communication Device: 0x1 [ 36.496932] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 39.969312] r592: driver successfully loaded [ 40.087608] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address XXX [ 40.087613] tg3 0000:05:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 40.087616] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 40.087618] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 42.754877] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 42.756725] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 42.932006] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 42.932013] cfg80211: failed to load regulatory.db [ 43.026710] mc: Linux media interface: v0.10 [ 43.304755] videodev: Linux video capture interface: v2.00 [ 44.079973] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 44.086329] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized! [ 44.086332] uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized! [ 44.086334] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized! [ 44.088186] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9 [ 44.089491] usbcore: registered new interface driver uvcvideo [ 44.089492] USB Video Class driver (1.1.1) [ 49.335400] tg3 0000:05:00.0 enp5s0: renamed from eth0 [ 59.236851] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker [ 59.236856] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 59.236858] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 59.236860] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 59.236862] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 59.236864] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 59.236866] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 59.236869] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 59.236871] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 59.261757] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 59.261862] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 59.261956] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 59.335399] r852: driver loaded successfully [ 60.541448] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 60.541451] iwl3945: Copyright(c) BDC6-FA10 Intel Corporation [ 60.541452] iwl3945: hw_scan is disabled [ 60.541540] iwl3945 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 60.595431] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 60.595435] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 60.595788] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 60.794308] iwl3945 0000:06:00.0 wlp6s0: renamed from wlan0 [ 60.882717] iwl3945 0000:06:00.0: loaded firmware version XXX.XXX.XXX.XXX [ 61.094587] Adding 3032236k swap on /dev/zram0. Priority:-2 extents:1 across:3032236k SSFS [ 71.489064] wlp6s0: authenticate with XXX [ 71.498345] wlp6s0: send auth to XXX (try 1/3) [ 71.702571] wlp6s0: send auth to XXX (try 2/3) [ 71.703586] wlp6s0: authenticated [ 71.710557] wlp6s0: associate with XXX (try 1/3) [ 71.714636] wlp6s0: RX AssocResp from XXX (capab=0x1411 status=0 aid=4) [ 71.715838] wlp6s0: associated [ 71.740500] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by XXX [ 71.782705] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 84.211133] rfkill: input handler disabled [ 87.357799] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 89.102110] ISO 9660 Extensions: RRIP_1991A [ 501.964193] perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 648.581659] perf: interrupt took too long (3166 > 3162), lowering kernel.perf_event_max_sample_rate to 63000 [ 845.500143] sysrq: Manual OOM execution [ 845.503989] Purging GPU memory, 148 pages freed, 0 pages still pinned, 24318 pages left available. [ 1029.440640] perf: interrupt took too long (3986 > 3957), lowering kernel.perf_event_max_sample_rate to 50000